v10/internal/design/spf/features/live-stream-support.md

status, date, definition

status	date	definition
draft	2026-06-23	sketched

Live stream support

The engine's foundation for playing live HLS sources: periodic media-playlist refetch, sliding-window segment tracking, target-duration pacing, Infinity duration semantics, live-edge seek, and termination detection (transitioning out of live mode when the stream ends). Distinct from sibling capabilities for low-latency live (LL-HLS) and DVR / event streams — those are extensions on top of this foundation, tracked as separate features.

A Media-src feature in the framing from clusters.md § Feature classification axes: without it, live HLS sources don't play correctly.

Status

• Composition: implemented in createSimpleHlsEngine at naive depth on branch feat/spf-hls-live. The engine composes uniformly across VOD and live — there is no live-vs-VOD composition branch; live behaviors are inert for VOD via finite-duration guards (Number.isFinite(track.duration)). The reload loop, sliding-window tracking, Infinity duration semantics, live-edge seek + setLiveSeekableRange, and termination-on-#EXT-X-ENDLIST all land. The live-window playhead guard (reposition-on-window-exit) is implemented as a reactor in seek-to-live-edge (window-update re-fire + a play listener). Not yet implemented: an edge-only live mode (a future use-case). Termination is #EXT-X-ENDLIST-based (the naive tier — sufficient for conformant content); the miss-counter fallback and reload jitter are deferred full-depth.
• Definition depth: sketched — grounded in the implementation on feat/spf-hls-live. Source material: SPF Epics Working Doc — Live Stream Support (epic #2) (cluster A foundation, eng size L, validation M).
• Foundational for the manifest-reload-loop cluster — ll-hls-support and dvr-event-stream-support build on this feature.

Phases of complexity

Capability slices for the foundational live-stream-support feature. Each phase below is part of "live works (and terminates) at all"; richer live variants (LL-HLS, DVR) sit in sibling features.

Phase	Status	What / how
Manifest reload loop	✅ Implemented	Periodic media-playlist refetch keyed off #EXT-X-TARGETDURATION. Each resolveXTrack owns a RecurringRunner (resolve-track.ts) rescheduled by delayedReschedule(mediaPlaylistReloadDelay) (wired in engine.ts). Cadence in reload-policy.ts: full target-duration on window change / first reload, half target-duration on unchanged window; start-anchored per RFC 8216bis §6.3.4; returns null (stops) once duration is finite
Sliding-window segment tracking	✅ Implemented	placeOnPreviousTimeline (parse-media-playlist.ts) carries the new window onto the established timeline via media-sequence overlap (PDT bridge on full turnover). Segment-loader planTasks re-evaluates the mutating track.segments on each load dispatch; back-buffer keeps last 2 segments. No explicit "no-longer-in-playlist" eviction signal — the keep-count heuristic + list shrink handle roll-off
Live duration semantics	✅ Implemented	Parser sets Track.duration = Infinity for unended live; calculatePresentationDuration (default resolver getResolvedSelectedTrackDuration) writes it; updateMediaSourceDuration propagates mediaSource.duration = Infinity once MS is open and buffers idle
Live edge tracking + setLiveSeekableRange	✅ Implemented (option b)	The live window (or null for VOD/ended) is derived once by the pure liveWindowFor (media/live-window.ts), consumed by two separate behaviors: sync-live-seekable-range.ts declares setLiveSeekableRange(start, end) reactively on each window slide (runs while paused too), and seek-to-live-edge.ts does the one-time seek to liveEdgeStart (the live latency behind the edge, via the getLiveEdge primitive). Separate from the reload loop (option b). Inert for VOD via liveWindowFor returning null. No clearLiveSeekableRange() on termination — unnecessary: the UA consults the live range only while duration === Infinity, so once endOfStream sets a finite duration it's ignored
Live-window playhead guard	✅ Implemented	seek-to-live-edge is a reactor (inactive ↔ live); the guard is the live state's effects. While playing (!paused && !seeking), it repositions currentTime to liveEdgeStart when the playhead has fallen behind the window start. Two triggers: the window-update re-fire (the effect reads the live edge, so each reload re-runs it — this catches fell-behind-on-poor-network (Scenario B), where timeupdate is silent during a stall) and a single play listener for immediate reposition on resume (Scenario A; the reload interval can be seconds) — play, not playing, since after a long pause the playhead sits behind the window at an unseekable position where playing never fires. Within-window pause / DVR scrub-back are left untouched. Deferred: playback-rate latency catch-up, MSE gap-jumping
Reload jitter / backoff	✅ Naive only	Target-duration cadence with unchanged-window throttle (half target). No thundering-herd jitter, no backoff on repeated identical-playlist responses (full depth, not implemented)
Per-type reload coordination	✅ Independent	Audio / video / text each own their RecurringRunner and reload on their own #EXT-X-TARGETDURATION. Resolved as extended resolveXTrack (same setupTrackResolution handles one-shot VOD and recurring live via the RecurringRunner abstraction) — no separate reloadXTrack family
Termination detection	✅ Naive depth	#EXT-X-ENDLIST recognized and surfaced (MediaPlaylistMetadata.endList); parser flips Track.duration finite (on ENDLIST or PLAYLIST-TYPE:VOD), which stops the reload loop. ENDLIST-only is the sanctioned naive tier (per clusters.md) and sufficient for conformant content (Mux always emits ENDLIST); the miss-counter fallback for non-conformant servers is deferred full-depth
Terminated state transition	✅ Implemented (one verify-later item)	Reload stops (policy returns null); the endOfStream gate unblocks once Track.duration is finite and the last segment is appended; per-type independent (waits for all active tracks). clearLiveSeekableRange() is intentionally not called — the MSE spec consults the live range only while duration === Infinity, so once endOfStream sets a finite duration the UA ignores it; clearing on the ENDLIST→finite transition would be premature (duration still Infinity) and shrink seekable to buffered-only

What's not implemented

Within this feature:

• Edge-only live mode — always snap to the live edge / no DVR (stop fetching while paused, narrowed seekable, snap to edge on resume). Lands as the [live-edge-only-mode] use-case, which introduces its own reposition behavior. (An earlier repositionPolicy seam anticipating it was removed when the guard became reload-driven — nothing consumed it, and "always-snap-on-resume" isn't expressible without resume-detection the window-exit guard doesn't carry.)

Naive depth (sufficient for conformant content; full depth deferred):

• Termination detection — #EXT-X-ENDLIST / PLAYLIST-TYPE:VOD only, the sanctioned naive tier per clusters.md. Full depth adds a miss-counter fallback for non-conformant servers that stop updating without ENDLIST (Mux always emits it).
• Reload jitter / backoff — target-duration cadence only; full depth adds thundering-herd jitter + backoff on identical-playlist responses.

Out of scope (separate Media-src features):

• ll-hls-support — blocking reload, partial segments, delta playlists, preload hints. Builds on this feature's reload loop.
• dvr-event-stream-support — growing (non-sliding) window, back-seek through history. Extension with different windowing semantics; shares the reload loop and the setLiveSeekableRange writer shape. Sits at the maximal-back-seek end of the seekable spectrum (edge-only ↔ in-window scrub-back ↔ full-history back-seek).
• non-zero-pts-support — live PTS advances from stream start, far from zero; the time-mapping primitive live consumes is a separate cluster B feature.
• buffer-stall-recovery — mid-stream stall detection + unstick-in-place recovery (nudge → flush → reset). Coordinates with this feature's guard: an in-window stall is buffer-stall-recovery's territory; the window-exit reposition is the live-specific terminal action.

Likely cross-cutting impact

The foundation is implemented, so most prior cross-cutting concerns are now realized. What remains is forward-looking:

• Edge-only mode is a future composition, not a runtime branch. The guard ships one behavior: window-exit (the DVR model — reposition only when the playhead is outside the window, in-window scrub-back preserved). The edge-only variant (stop fetching while paused + always-snap on resume + narrowed seekable) is a future Composition (alternative-default-config + add + alternative-impl) tracked as the [live-edge-only-mode] use-case. Per clusters.md § Composition vs Policy vs middle pattern, it composes a variant rather than branching at runtime, and introduces its own reposition behavior. (The repositionPolicy config seam that once anticipated it was removed when the guard became reload-driven — see "What's not implemented".)
• Single owner of the live playhead position. The guard writes currentTime (a seek). seek-to-live-edge already does the one-time initial seek; folding the guard into it keeps one writer of "where the live playhead belongs" (initial seek = first firing) rather than two behaviors racing seeks. No new state slot — the guard reads existing presentation.duration (finiteness guard), selectedVideoTrackId, and track.segments (window), plus the currentTime mirror.
• Primary trigger is the window-update signal, not timeupdate. Scenario B's fall-behind happens during a stall, when timeupdate has stopped but the window keeps sliding via reloads — so the guard re-evaluates on the reload / window-update signal (the effect's tracked read of the live edge). A single play listener is the secondary trigger, for immediate reposition on resume (the reload interval can be seconds). timeupdate / seeked are unused.

Implementation surface

Behaviors:

Behavior	File	Live responsibility
liveWindowFor (pure helper)	media/live-window.ts	Derive the live window {start,end} from the track with the given id (type-agnostic via findTrackById), or null (VOD/ended/unresolved). Purely geometric — no delivery-format metadata. Centralizes all inertness so consumers don't re-derive the window.
liveWindowFromState / getLiveEdge (primitives)	playback/primitives/live-window.ts	The state-reading call sites the live behaviors use. liveWindowFromState picks the timeline-bearing track — selectedVideoTrackId ?? selectedAudioTrackId (video positions both A/V; audio-only falls back to audio) — and calls liveWindowFor. getLiveEdge({state,config}) adds the target playhead position (liveEdgeStart = end − live latency, clamped to start), bundling window geometry with the format-specific config.resolveLiveLatency policy so the behavior consumes one edge. Reads signals lazily (call inside an effect).
syncLiveSeekableRange	behaviors/dom/sync-live-seekable-range.ts	Consume liveWindowFromState; setLiveSeekableRange(start, end) reactively on each window slide, including while paused. Duration is owned solely by updateMediaSourceDuration. Composed before seekToLiveEdge.
seekToLiveEdge	behaviors/dom/seek-to-live-edge.ts	A reactor (inactive ↔ live) consuming getLiveEdge. live entry does the one-time seek to liveEdgeStart; live effects runs the window-exit guard (window-update re-fire + play listener). Format-neutral — the live latency comes from the injected resolveLiveLatency seam, never read here. The mediaSource-open precondition orders the entry seek after sync-live-seekable-range declares the range, so the seek lands in-window.
anchorLiveTracks	behaviors/anchor-live-tracks.ts	Pin live track timelines to the SourceBuffer's native-PTS ground truth (first appended segment) or manifest estimate; re-pin per reload as the window slides
resolveVideoTrack / resolveAudioTrack / resolveTextTrack	behaviors/resolve-track.ts	Own the reload loop via RecurringRunner; reschedule defaults to mediaPlaylistReloadDelay; per-type independent
calculatePresentationDuration	behaviors/calculate-presentation-duration.ts	Populate presentation.duration via the config resolver (Infinity for unended live)
updateMediaSourceDuration	behaviors/dom/update-mediasource-duration.ts	Propagate presentation.duration to mediaSource.duration once per MediaSource (uniform across variants)
endOfStream	behaviors/dom/end-of-stream.ts	Gate on Track.duration finiteness — inert for ongoing live, reachable once terminated

Actors: SegmentLoaderActor (actors/dom/segment-loader.ts) — planTasks / getSegmentsToLoad iterate the live-mutating segment list within the forward/back-buffer windows; SourceBufferActor (actors/dom/source-buffer.ts) — append/remove + tracks appended segment IDs for the endOfStream gate.

State / derived: presentation.duration (Infinity for live; written by calculatePresentationDuration, read by updateMediaSourceDuration / seek-to-live-edge / endOfStream — distinct decision domains, not a multi-writer conflict). presentation.streamType ('live'). Per-track segments (live-mutating; written by reload parse, read by segment-loader). Live edge and liveEdgeStart are derived (via getLiveEdge) from track.segments + the injected latency, not state slots.

Engine composition: engines/hls/engine.ts composes the live behaviors unconditionally (anchorLiveTracks, calculatePresentationDuration, updateMediaSourceDuration, the resolveXTrack family with reschedule: delayedReschedule(mediaPlaylistReloadDelay), seekToLiveEdge, endOfStream); VOD inertness comes from finite-duration guards, not a branch.

Config surface

Constant	File	Value	Purpose
HOLD_BACK_TARGET_MULTIPLIER	media/hls/reload-policy.ts	3	HLS default HOLD-BACK as a multiple of target duration. liveLatencyFor(track) applies it; the engine injects it as seekToLiveEdge's format-neutral resolveLiveLatency seam. Initial-seek + guard reposition target = live edge − live latency, clamped to window start
REPOSITION_TOLERANCE	behaviors/dom/seek-to-live-edge.ts	0.1	Guard's boundary tolerance (s) — avoids jitter seeks at the window edges
FALLBACK_TARGET_DURATION	media/hls/reload-policy.ts	6	Reload cadence (s) — and HOLD-BACK basis — when no #EXT-X-TARGETDURATION
resolveLiveLatency	seekToLiveEdge config (engine-injected)	liveLatencyFor (HLS)	Format-neutral seam for the seconds the playhead trails the live edge. HLS injects HOLD-BACK (3× target duration); a DASH engine would inject suggestedPresentationDelay. Keeps seek-to-live-edge free of delivery-format specifics
DEFAULT_FORWARD_BUFFER_CONFIG.bufferDuration	media/buffer/forward-buffer.ts	30	Seconds ahead of playhead to load
DEFAULT_BACK_BUFFER_CONFIG.keepSegments	media/buffer/back-buffer.ts	2	Segments kept behind playhead

Verification

Existing (implemented phases):

• media/hls/tests/reload-policy.test.ts — cadence: null for finite duration, full/half target-duration, 6s fallback.
• media/hls/tests/parse-media-playlist.test.ts — Infinity for unended live; endList on #EXT-X-ENDLIST; finite for PLAYLIST-TYPE:VOD; PDT capture + carry-forward.
• behaviors/tests/anchor-live-tracks.test.ts — pin to buffer ground truth; PDT carry-forward; sequence-origin bootstrap.
• behaviors/tests/resolve-track.test.ts — live reload re-resolves; stops on finite duration; source-change abort.
• behaviors/dom/tests/seek-to-live-edge.test.ts — seeks to liveEdgeStart (latency injected via resolveLiveLatency); no-op for finite/absent tracks. Plus the live-window guard matrix (see below).
• playback/primitives/tests/live-window.test.ts — liveWindowFromState / liveTrackId track-pick; getLiveEdge latency placement + window-start clamp.
• media/hls/tests/reload-policy.test.ts — also liveLatencyFor (3× target duration; fallback).
• behaviors/tests/calculate-presentation-duration.test.ts — Infinity for live resolver.
• engines/hls/tests/engine.test.ts — end-to-end live setup / reload / window slide / termination.
• Sandbox: apps/sandbox/templates/live-hls-engine, SOURCES['hls-live'].

Live-window playhead guard — behaviors/dom/tests/seek-to-live-edge.test.ts (describe('live-window playhead guard'), event-capable fake media element): playing-inside-window → no seek; behind-window-start on resume (play) → seek to liveEdgeStart; paused while the window slides → no seek, then seek on play resume; DVR mid-window scrub-back across a window update → no yank; seeking in flight → no seek, then seek once it settles; sub-tolerance boundary → no jitter seek, beyond-tolerance → seek; stalled-behind-window (playing, frozen currentTime) → repositions on the window-update re-fire.

Out of scope / deferred: E2E (Chromium) — a local synthetic sliding-window stream (short target-duration) driving pause-beyond-window → resume-snaps-near-edge and a CDP Network.emulateNetworkConditions buffer-drain → reposition-and-recover. Deferred: needs new synthetic-sliding-window HLS fixture infra; the unit matrix covers the guard logic deterministically.

Open questions

• Guard reposition target under truly-insufficient bandwidth. If the network can't sustain even the lowest rate, the guard can loop (reposition → stall → window slides → reposition). v1 lean: accept the loop (the stream is below its playable floor; the jumps are honest) and document it; cheap alternative is deepening the holdback on repeated exits rather than touching playback rate.
• Miss-counter threshold (if pursued). How many identical-manifest reloads constitute termination?

Resolved during guard implementation:

• repositionPolicy seam → introduced as behavior-scoped config in the initial guard, then removed when the guard became reload-driven (window-update re-fire + play listener): nothing consumed it, and the edge-only 'on-resume' behavior isn't expressible without resume-detection the window-exit guard doesn't carry. The [live-edge-only-mode] use-case defines its own reposition behavior when built (per conventions/config.md — anti-speculative-config).
• Guard placement → the live state's effects in the seek-to-live-edge reactor (single owner of the live playhead position), not a sibling behavior.

Related features

• ll-hls-support — builds on this feature's reload loop; adds blocking reload, partial segments, delta playlists, preload hints.
• dvr-event-stream-support — growing window + full-history back-seek on the same reload loop; the maximal-back-seek end of the seekable spectrum (edge-only ↔ in-window scrub-back ↔ full history).
• buffer-stall-recovery — in-window stall detection + unstick-in-place recovery; coordinates with this feature's guard (window-exit reposition is the live-specific terminal action).
• non-zero-pts-support — live PTS starts far from zero; cluster B foundation live consumes for correct currentTime / seekable.
• mse-mms-pipeline — Infinity duration via config.resolveDuration; the endOfStream gate uses segment + currentTime, not duration finiteness.
• buffer-management — sliding-window tracking interacts with back-buffer eviction; the planner's currentTime-driven shape applies with the list mutating mid-flight.
• video-abr / audio-playback / subtitles — per-type consumers read the resolved track that now changes over time (segments append / roll off).
• source-replacement — orthogonal; live → live source change tears down and rebuilds the reload loop via the same in-place cascade.
• [live-edge-only-mode] (future use-case) — the edge-only composition (always snap to the live edge / no DVR); introduces its own reposition behavior.

See also

• clusters.md § Manifest reload loop — cluster A description; this feature is the foundation.
• clusters.md § Composition vs Policy vs middle pattern — the edge-only composition framing.
• live-timeline-anchoring — PDT anchor that places the sliding-window timeline anchorLiveTracks consumes.
• mse-timestamp-offset — native-PTS default, setLiveSeekableRange in native coords, one-time seek into the window on load.
• presentation-modeling.md — the reload loop sits below resolvePresentation and re-uses parseMediaPlaylist per cycle.
• SPF Epics Working Doc — cluster A epic candidates.
• Mux Video Permutations Matrix — Stream Type section.