updated for version 7.4.650

Problem:    Configure check may fail because the dl library is not used.
Solution:   Put "-ldl" in LIBS rather than LDFLAGS. (Oazki Kiichi)

.gitignore

@@ -36,19 +36,40 @@ src/Obj*/pathdef.c
 gvimext.dll
 gvimext.lib
 
+# Borland C++
+bcc.cfg
+*.ilc
+*.ild
+*.ilf
+*.ils
+*.map
+*.tds
+
+# NetBeans
+nbproject/*
+
+# Mac OSX
+src/xxd/xxd.dSYM
+
 # All platforms
 *.rej
 *.orig
 *.mo
 *.swp
 *~
+*.pyc
+*.log
 src/po/vim.pot
 
 # Generated by "make test"
-src/po/*.ck 
-src/testdir/mbyte.vim 
-src/testdir/mzscheme.vim 
-src/testdir/lua.vim 
-src/testdir/small.vim 
-src/testdir/tiny.vim 
+src/po/*.ck
+src/testdir/mbyte.vim
+src/testdir/mzscheme.vim
+src/testdir/lua.vim
+src/testdir/small.vim
+src/testdir/tiny.vim
 src/testdir/test*.out
+src/testdir/test*.failed
+src/testdir/test.log
+src/testdir/dostmp/*
+src/memfile_test

Contents

@@ -9,10 +9,10 @@ Vim		Vi IMproved.  A clone of the UNIX text editor Vi.  Very useful
 		messages, shows current file name in window title, on-line
 		help, rectangular cut/paste, etc., etc., etc...
 
-		Version 7.3.  Also runs under UNIX, MSDOS and other systems.
-		vim73rt.tgz  contains the documentation and syntax files.
-		vim73bin.tgz contains the binaries.
-		vim73src.tgz contains the sources.
+		Version 7.4.  Also runs under UNIX, MSDOS and other systems.
+		vim74rt.tgz  contains the documentation and syntax files.
+		vim74bin.tgz contains the binaries.
+		vim74src.tgz contains the sources.
 		Author: Bram Moolenaar et al.
 
 

Filelist

@@ -3,6 +3,7 @@
 
 # source files for all source archives
 SRC_ALL =	\
+		.hgignore \
 		src/README.txt \
 		src/arabic.c \
 		src/arabic.h \
@@ -10,6 +11,8 @@ SRC_ALL =	\
 		src/blowfish.c \
 		src/buffer.c \
 		src/charset.c \
+		src/crypt.c \
+		src/crypt_zip.c \
 		src/diff.c \
 		src/digraph.c \
 		src/edit.c \
@@ -79,15 +82,35 @@ SRC_ALL =	\
 		src/xxd/xxd.c \
 		src/main.aap \
 		src/testdir/main.aap \
+		src/testdir/README.txt \
 		src/testdir/*.in \
+		src/testdir/sautest/autoload/*.vim \
 		src/testdir/test[0-9]*.ok \
+		src/testdir/test[0-9]*a.ok \
+		src/testdir/test_[a-z]*.ok \
 		src/testdir/test49.vim \
 		src/testdir/test60.vim \
 		src/testdir/test83-tags? \
+		src/testdir/test77a.com \
+		src/testdir/test_*.vim \
+		src/testdir/python2/*.py \
+		src/testdir/python3/*.py \
+		src/testdir/pythonx/*.py \
+		src/testdir/pythonx/topmodule/__init__.py \
+		src/testdir/pythonx/topmodule/submodule/__init__.py \
+		src/testdir/pythonx/topmodule/submodule/subsubmodule/__init__.py \
+		src/testdir/pythonx/topmodule/submodule/subsubmodule/subsubsubmodule.py \
+		src/testdir/python_after/*.py \
+		src/testdir/python_before/*.py \
+		src/testdir/bench*.in \
+		src/testdir/bench*.vim \
+		src/testdir/samples/*.txt \
 		src/proto.h \
 		src/proto/blowfish.pro \
 		src/proto/buffer.pro \
 		src/proto/charset.pro \
+		src/proto/crypt.pro \
+		src/proto/crypt_zip.pro \
 		src/proto/diff.pro \
 		src/proto/digraph.pro \
 		src/proto/edit.pro \
@@ -257,6 +280,7 @@ SRC_DOS =	\
 		src/Make_bc3.mak \
 		src/Make_bc5.mak \
 		src/Make_cyg.mak \
+		src/Make_cyg_ming.mak \
 		src/Make_djg.mak \
 		src/Make_ivc.mak \
 		src/Make_dvc.mak \
@@ -274,6 +298,8 @@ SRC_DOS =	\
 		src/dosinst.h \
 		src/glbl_ime.cpp \
 		src/glbl_ime.h \
+		src/gui_dwrite.cpp \
+		src/gui_dwrite.h \
 		src/gui_w16.c \
 		src/gui_w32.c \
 		src/gui_w48.c \
@@ -685,6 +711,7 @@ LANG_GEN = \
 		runtime/doc/*-fr.UTF-8.1 \
 		runtime/doc/*-it.1 \
 		runtime/doc/*-it.UTF-8.1 \
+		runtime/doc/*-ja.UTF-8.1 \
 		runtime/doc/*-pl.1 \
 		runtime/doc/*-pl.UTF-8.1 \
 		runtime/doc/*-ru.1 \

Makefile

@@ -74,14 +74,17 @@ all install uninstall tools config configure reconfig proto depend lint tags typ
 #    Before creating an archive first delete all backup files, *.orig, etc.
 
 MAJOR = 7
-MINOR = 3
+MINOR = 4
 
 # Uncomment this line if the Win32s version is to be included.
-DOSBIN_S =  dosbin_s
+# DOSBIN_S =  dosbin_s
 
 # Uncomment this line if the 16 bit DOS version is to be included.
 # DOSBIN_D16 = dosbin_d16
 
+# Uncomment this line if the 32 bit DOS version is to be included.
+# DOSBIN_D32 = dosbin_d32
+
 # CHECKLIST for creating a new version:
 #
 # - Update Vim version number.  For a test version in: src/version.h, Contents,
@@ -89,8 +92,6 @@ DOSBIN_S =  dosbin_s
 #   runtime/doc/*.txt and nsis/gvim.nsi. Other things in README_os2.txt.  For a
 #   minor/major version: src/GvimExt/GvimExt.reg, src/vim.def, src/vim16.def,
 #   src/gvim.exe.mnf.
-# - Adjust the date and other info in src/version.h.
-# - Correct included_patches[] in src/version.c.
 # - Compile Vim with GTK, Perl, Python, Python3, TCL, Ruby, MZscheme, Lua (if
 #   you can make it all work), Cscope and "huge" features.  Exclude workshop
 #   and SNiFF.
@@ -99,8 +100,14 @@ DOSBIN_S =  dosbin_s
 # - With these features: "make depend" (works best with gcc).
 # - If you have a lint program: "make lint" and check the output (ignore GTK
 #   warnings).
-# - Enable the efence library in "src/Makefile" and run "make test".  Disable
-#   Python and Ruby to avoid trouble with threads (efence is not threadsafe).
+# - If you have valgrind, enable it in src/testdir/Makefile and run "make
+#   test".  Enable EXITFREE, disable GUI, scheme and tcl to avoid false alarms.
+#   Check the valgrind output.
+# - If you have the efence library, enable it in "src/Makefile" and run "make
+#   test".  Disable Python and Ruby to avoid trouble with threads (efence is
+#   not threadsafe).
+# - Adjust the date and other info in src/version.h.
+# - Correct included_patches[] in src/version.c.
 # - Check for missing entries in runtime/makemenu.vim (with checkmenu script).
 # - Check for missing options in runtime/optwin.vim et al. (with check.vim).
 # - Do "make menu" to update the runtime/synmenu.vim file.
@@ -108,8 +115,8 @@ DOSBIN_S =  dosbin_s
 # - Check that runtime/doc/help.txt doesn't contain entries in "LOCAL
 #   ADDITIONS".
 # - In runtime/doc run "make" and "make html" to check for errors.
-# - Check if src/Makefile and src/feature.h don't contain any personal
-#   preferences or the GTK, Perl, etc. mentioned above.
+# - Check if src/Makefile, src/testdir/Makefile and src/feature.h don't contain
+#   any personal preferences or the changes mentioned above.
 # - Check file protections to be "644" for text and "755" for executables (run
 #   the "check" script).
 # - Check compiling on Amiga, MS-DOS and MS-Windows.
@@ -128,36 +135,20 @@ DOSBIN_S =  dosbin_s
 # PC:
 # - Run make on Unix to update the ".mo" files.
 # - "make dossrc" and "make dosrt".  Unpack the archives on a PC.
-# 16 bit DOS version: (OBSOLETE, 16 bit version doesn't build)
-# - Set environment for compiling with Borland C++ 3.1.
-# - "bmake -f Make_bc3.mak BOR=E:\borlandc" (compiling xxd might fail, in that
-#   case set environment for compiling with Borland C++ 4.0 and do
-#   "make -f make_bc3.mak BOR=E:\BC4 xxd/xxd.exe").
-#   NOTE: this currently fails because Vim is too big.
-# - "make test" and check the output.
-# - Rename the executables to "vimd16.exe", "xxdd16.exe", "installd16.exe" and
-#   "uninstald16.exe".
-# 32 bit DOS version:
-# - Set environment for compiling with DJGPP; "gmake -f Make_djg.mak".
-# - "rm testdir/*.out", "gmake -f Make_djg.mak test" and check the output for
-#   "ALL DONE".
-# - Rename the executables to "vimd32.exe", "xxdd32.exe", "installd32.exe" and
-#   "uninstald32.exe".
 # Win32 console version:
-# - Set environment for Visual C++ 2008, e.g.:
-#   "E:\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat".  Or, when using the
-#   Visual C++ Toolkit 2003: "msvcsetup.bat" (adjust the paths when necessary).
-#   For Windows 98/ME the 2003 version is required, but then it won't work on
-#   Windows 7 and 64 bit.
-# - "nmake -f Make_mvc.mak"
+# - Set environment for Visual C++ 2008, e.g.: "msvc2008.bat"  Or:
+#   "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat".
+#   Or, when using the Visual C++ Toolkit 2003: "msvcsetup.bat" (adjust the
+#   paths when necessary).
+#   For Windows 98/ME the 2003 version is required, but then the executable
+#   won't work on Windows 7 and 64 bit systems.
+# - "nmake -f Make_mvc.mak"  (use the same path as for vcvars32.bat)
 # - "rm testdir/*.out", "nmake -f Make_mvc.mak test" and check the output.
-# - Rename the executables to "vimw32.exe", "xxdw32.exe".
+# - Rename vim.exe to vimw32.exe, xxd/xxd.exe to xxdw32.exe.
 # - Rename vim.pdb to vimw32.pdb.
-# - When building the Win32s version later, delete vimrun.exe, install.exe and
-#   uninstal.exe.  Otherwise rename executables to installw32.exe and
-#   uninstalw32.exe.
+# - Rename install.exe to installw32.exe and uninstal.exe to uninstalw32.exe.
 # Win32 GUI version:
-# - "nmake -f Make_mvc.mak GUI=yes.
+# - "nmake -f Make_mvc.mak GUI=yes"
 # - move "gvim.exe" to here (otherwise the OLE version will overwrite it).
 # - Move gvim.pdb to here.
 # - Delete vimrun.exe, install.exe and uninstal.exe.
@@ -167,23 +158,13 @@ DOSBIN_S =  dosbin_s
 # - Rename "gvim.exe" to "gvim_ole.exe".
 # - Rename gvim.pdb to "gvim_ole.pdb".
 # - Delete install.exe and uninstal.exe.
-# - If building the Win32s version delete vimrun.exe.
-# Win32s GUI version:
-# - Set environment for Visual C++ 4.1 (requires a new console window):
-#   "vcvars32.bat" (use the path for VC 4.1 e:\msdev\bin)
-# - "nmake -f Make_mvc.mak GUI=yes INTL=no clean" (use the path for VC 4.1)
-# - "nmake -f Make_mvc.mak GUI=yes INTL=no" (use the path for VC 4.1)
-# - Rename "gvim.exe" to "gvim_w32s.exe".
-# - Rename "install.exe" to "installw32.exe"
-# - Rename "uninstal.exe" to "uninstalw32.exe"
-# - The produced uninstalw32.exe and vimrun.exe are used.
 # Create the archives:
 # - Copy all the "*.exe" files to where this Makefile is.
 # - Copy all the "*.pdb" files to where this Makefile is.
 # - "make dosbin".
 # NSIS self installing exe:
 # - To get NSIS see http://nsis.sourceforge.net
-# - Make sure gvim_ole.exe, vimd32.exe, vimw32.exe, installw32.exe,
+# - Make sure gvim_ole.exe, vimw32.exe, installw32.exe,
 #   uninstalw32.exe and xxdw32.exe have been build as mentioned above.
 # - copy these files (get them from a binary archive or build them):
 #	gvimext.dll in src/GvimExt
@@ -196,7 +177,44 @@ DOSBIN_S =  dosbin_s
 # - go to ../nsis and do "makensis gvim.nsi" (takes a few minutes).
 # - Copy gvim##.exe to the dist directory.
 #
-# OS/2: (OBSOLETE, OS/2 version is no longer distributed)
+# 64 bit builds (these are not in the normal distribution, the 32 bit build
+# works just fine on 64 bit systems).
+# Like the console and GUI version, but first run vcvars64.bat or
+#   "..\VC\vcvarsall.bat x86_amd64".
+# - "nmake -f Make_mvc.mak"
+# - "nmake -f Make_mvc.mak GUI=yes"
+# Or run src/bigvim64.bat for an OLE version.
+#
+# OBSOLETE systems: You can build this if you have an appropriate system.
+#
+# 16 bit DOS version: (doesn't build anywhere)
+# - Set environment for compiling with Borland C++ 3.1.
+# - "bmake -f Make_bc3.mak BOR=E:\borlandc" (compiling xxd might fail, in that
+#   case set environment for compiling with Borland C++ 4.0 and do
+#   "make -f make_bc3.mak BOR=E:\BC4 xxd/xxd.exe").
+#   NOTE: this currently fails because Vim is too big.
+# - "make test" and check the output.
+# - Rename the executables to "vimd16.exe", "xxdd16.exe", "installd16.exe" and
+#   "uninstald16.exe".
+#
+# 32 bit DOS version: (requires Windows XP or earlier)
+# - Set environment for compiling with DJGPP; "gmake -f Make_djg.mak".
+# - "rm testdir/*.out", "gmake -f Make_djg.mak test" and check the output for
+#   "ALL DONE".
+# - Rename the executables to "vimd32.exe", "xxdd32.exe", "installd32.exe" and
+#   "uninstald32.exe".
+#
+# Win32s GUI version: (requires very old compiler)
+# - Set environment for Visual C++ 4.1 (requires a new console window):
+#   "vcvars32.bat" (use the path for VC 4.1 e:\msdev\bin)
+# - "nmake -f Make_mvc.mak GUI=yes INTL=no clean" (use the path for VC 4.1)
+# - "nmake -f Make_mvc.mak GUI=yes INTL=no" (use the path for VC 4.1)
+# - Rename "gvim.exe" to "gvim_w32s.exe".
+# - Rename "install.exe" to "installw32.exe"
+# - Rename "uninstal.exe" to "uninstalw32.exe"
+# - The produced uninstalw32.exe and vimrun.exe are used.
+#
+# OS/2: (requires an OS/2 system)
 # - Unpack the Unix archive.
 # - "make -f Make_os2.mak".
 # - Rename the executables to vimos2.exe, xxdos2.exe and teeos2.exe and copy
@@ -295,6 +313,8 @@ unixall: dist prepare
 		$(LANG_SRC) \
 		| (cd dist/$(VIMRTDIR); tar xf -)
 # Need to use a "distclean" config.mk file
+# Note: this file is not included in the repository to avoid problems, but it's
+# OK to put it in the archive.
 	cp -f src/config.mk.dist dist/$(VIMRTDIR)/src/auto/config.mk
 # Create an empty config.h file, make dependencies require it
 	touch dist/$(VIMRTDIR)/src/auto/config.h
@@ -450,7 +470,7 @@ runtime_unix2dos: dosrt_unix2dos
 	cd dist/vim/$(VIMRTDIR); tar cf - * \
 		| (cd ../../../runtime/dos; tar xf -)
 
-dosbin: prepare dosbin_gvim dosbin_w32 dosbin_d32 dosbin_ole $(DOSBIN_S) $(DOSBIN_D16)
+dosbin: prepare dosbin_gvim dosbin_w32 $(DOSBIN_D32) dosbin_ole $(DOSBIN_S) $(DOSBIN_D16)
 
 # make Win32 gvim
 dosbin_gvim: dist no_title.vim dist/$(COMMENT_GVIM)

README.txt

@@ -1,4 +1,4 @@
-README.txt for version 7.3 of Vim: Vi IMproved.
+README.txt for version 7.4 of Vim: Vi IMproved.
 
 
 WHAT IS VIM

README_ami.txt

@@ -1,4 +1,4 @@
-README_ami.txt for version 7.3 of Vim: Vi IMproved.
+README_ami.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Amiga systems.
 See README.txt for general information about Vim.

README_amibin.txt

@@ -1,4 +1,4 @@
-README_amibin.txt for version 7.3 of Vim: Vi IMproved.
+README_amibin.txt for version 7.4 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_ami.txt" for installation instructions for the Amiga.

README_amisrc.txt

@@ -1,4 +1,4 @@
-README_amisrc.txt for version 7.3 of Vim: Vi IMproved.
+README_amisrc.txt for version 7.4 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_ami.txt" for installation instructions for the Amiga.

README_bindos.txt

@@ -1,19 +1,16 @@
-README_bindos.txt for version 7.3 of Vim: Vi IMproved.
+README_bindos.txt for version 7.4 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim73rt.zip).
+These files are in the runtime archive (vim74rt.zip).
 
 
 There are several binary distributions of Vim for the PC.  You would normally
 pick only one of them, but it's also possible to install several.
 These ones are available (the version number may differ):
-	vim73d16.zip	16 bit DOS version
-	vim73d32.zip	32 bit DOS version
-	vim73w32.zip	Windows 95/98/NT/etc. console version
-	gvim73.zip	Windows 95/98/NT/etc. GUI version
-	gvim73ole.zip	Windows 95/98/NT/etc. GUI version with OLE
-	gvim73_s.zip	Windows 3.1 GUI version
+	vim74w32.zip	Windows 95/98/NT/etc. console version
+	gvim74.zip	Windows 95/98/NT/etc. GUI version
+	gvim74ole.zip	Windows 95/98/NT/etc. GUI version with OLE
 
-You MUST also get the runtime archive (vim73rt.zip).
-The sources are also available (vim73src.zip).
+You MUST also get the runtime archive (vim74rt.zip).
+The sources are also available (vim74src.zip).

README_dos.txt

@@ -1,4 +1,4 @@
-README_dos.txt for version 7.3 of Vim: Vi IMproved.
+README_dos.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on MS-DOS and MS-Windows systems.
 See "README.txt" for general information about Vim.
@@ -47,13 +47,13 @@ These are the normal steps to install Vim from the .zip archives:
    Binary and runtime Vim archives are normally unpacked in the same location,
    on top of each other.
 
-2. Unpack the zip archives.  This will create a new directory "vim\vim73",
+2. Unpack the zip archives.  This will create a new directory "vim\vim74",
    in which all the distributed Vim files are placed.  Since the directory
    name includes the version number, it is unlikely that you overwrite
    existing files.
    Examples:
-	pkunzip -d gvim73.zip
-	unzip vim73w32.zip
+	pkunzip -d gvim74.zip
+	unzip vim74w32.zip
 
    You need to unpack the runtime archive and at least one of the binary
    archives.  When using more than one binary version, be careful not to
@@ -69,7 +69,7 @@ These are the normal steps to install Vim from the .zip archives:
    archive and follow the instructions in the documentation.
 
 3. Change to the new directory:
-	cd vim\vim73
+	cd vim\vim74
    Run the "install.exe" program.  It will ask you a number of questions about
    how you would like to have your Vim setup.  Among these are:
    - You can tell it to write a "_vimrc" file with your preferences in the
@@ -80,8 +80,8 @@ These are the normal steps to install Vim from the .zip archives:
      console or in a shell.  You can select one of the directories in your
      $PATH.  If you skip this, you can add Vim to the search path manually:
      The simplest is to add a line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim73
-	set path=%path%;D:\editors\vim\vim73
+	set path=%path%;C:\vim\vim74
+	set path=%path%;D:\editors\vim\vim74
    - Create entries for Vim on the desktop and in the Start menu.
 
 That's it!
@@ -93,8 +93,8 @@ Remarks:
   won't show a menubar.  Then you need to set the $VIM environment variable to
   point to the top directory of your Vim files.  Example:
     set VIM=C:\editors\vim
-  Vim version 7.3 will look for your vimrc file in $VIM, and for the runtime
-  files in $VIM/vim73.  See ":help $VIM" for more information.
+  Vim version 7.4 will look for your vimrc file in $VIM, and for the runtime
+  files in $VIM/vim74.  See ":help $VIM" for more information.
 
 - To avoid confusion between distributed files of different versions and your
   own modified vim scripts, it is recommended to use this directory layout:
@@ -105,14 +105,14 @@ Remarks:
 	C:\vim\vimfiles\ftplugin\*.vim	Filetype plugins
 	C:\vim\...			Other files you made.
   Distributed files:
-	C:\vim\vim73\vim.exe		The Vim version 7.3 executable.
-	C:\vim\vim73\doc\*.txt		The version 7.3 documentation files.
-	C:\vim\vim73\bugreport.vim	A Vim version 7.3 script.
-	C:\vim\vim73\...		Other version 7.3 distributed files.
+	C:\vim\vim74\vim.exe		The Vim version 7.4 executable.
+	C:\vim\vim74\doc\*.txt		The version 7.4 documentation files.
+	C:\vim\vim74\bugreport.vim	A Vim version 7.4 script.
+	C:\vim\vim74\...		Other version 7.4 distributed files.
   In this case the $VIM environment variable would be set like this:
 	set VIM=C:\vim
-  Then $VIMRUNTIME will automatically be set to "$VIM\vim73".  Don't add
-  "vim73" to $VIM, that won't work.
+  Then $VIMRUNTIME will automatically be set to "$VIM\vim74".  Don't add
+  "vim74" to $VIM, that won't work.
 
 - You can put your Vim executable anywhere else.  If the executable is not
   with the other Vim files, you should set $VIM. The simplest is to add a line
@@ -136,8 +136,8 @@ Remarks:
      Select Properties.
   5. In the Program tab, change the "Cmdline" to add "/c" and the name of the
      Vim executable.  Examples:
-	C:\command.com /c C:\vim\vim73\vim.exe
-	C:\command.com /c D:\editors\vim\vim73\vim.exe
+	C:\command.com /c C:\vim\vim74\vim.exe
+	C:\command.com /c D:\editors\vim\vim74\vim.exe
   6. Select the font, window size, etc. that you like.  If this isn't
      possible, select "Advanced" in the Program tab, and deselect "MS-DOS
      mode".

README_extra.txt

@@ -1,4 +1,4 @@
-README_extra.txt for version 7.3 of Vim: Vi IMproved.
+README_extra.txt for version 7.4 of Vim: Vi IMproved.
 
 These extra files of Vim are for special purposes.  This README explains what
 the files are for.  For general information about Vim, see the "README.txt"

README_mac.txt

@@ -1,4 +1,4 @@
-README_mac.txt for version 7.3 of Vim: Vi IMproved.
+README_mac.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Macintosh systems.
 See "README.txt" for general information about Vim.

README_ole.txt

@@ -1,4 +1,4 @@
-README_ole.txt for version 7.3 of Vim: Vi IMproved.
+README_ole.txt for version 7.4 of Vim: Vi IMproved.
 
 This archive contains gvim.exe with OLE interface and VisVim.
 This version of gvim.exe can also load a number of interface dynamically (you

README_os2.txt

@@ -1,32 +1,32 @@
-README_os2.txt for version 7.3 of Vim: Vi IMproved.
+README_os2.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on OS/2 systems.
 See "README.txt" for general information about Vim.
 
 
 NOTE: You will need two archives:
-  vim73rt.zip	contains the runtime files (same as for the PC version)
-  vim73os2.zip	contains the OS/2 executables
+  vim74rt.zip	contains the runtime files (same as for the PC version)
+  vim74os2.zip	contains the OS/2 executables
 
 1. Go to the directory where you want to put the Vim files.  Examples:
 	cd C:\
 	cd D:\editors
 
-2. Unpack the zip archives.  This will create a new directory "vim/vim73",
+2. Unpack the zip archives.  This will create a new directory "vim/vim74",
    in which all the distributed Vim files are placed.  Since the directory
    name includes the version number, it is unlikely that you overwrite
    existing files.
    Examples:
-	pkunzip -d vim73os2.zip
-	unzip vim73os2.zip
+	pkunzip -d vim74os2.zip
+	unzip vim74os2.zip
 
    After you unpacked the files, you can still move the whole directory tree
    to another location.
 
 3. Add the directory where vim.exe is to your path.  The simplest is to add a
    line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim73
-	set path=%path%;D:\editors\vim\vim73
+	set path=%path%;C:\vim\vim74
+	set path=%path%;D:\editors\vim\vim74
 
 That's it!
 
@@ -41,10 +41,10 @@ Extra remarks:
 	C:\vim\_viminfo			Dynamic info for 'viminfo'.
 	C:\vim\...			Other files you made.
   Distributed files:
-	C:\vim\vim73\vim.exe		The Vim version 7.3 executable.
-	C:\vim\vim73\doc\*.txt		The version 7.3 documentation files.
-	C:\vim\vim73\bugreport.vim	A Vim version 7.3 script.
-	C:\vim\vim73\...		Other version 7.3 distributed files.
+	C:\vim\vim74\vim.exe		The Vim version 7.4 executable.
+	C:\vim\vim74\doc\*.txt		The version 7.4 documentation files.
+	C:\vim\vim74\bugreport.vim	A Vim version 7.4 script.
+	C:\vim\vim74\...		Other version 7.4 distributed files.
   In this case the $VIM environment variable would be set like this:
 	set VIM=C:\vim
 

README_os390.txt

@@ -1,4 +1,4 @@
-README_zOS.txt for version 7.3 of Vim: Vi IMproved.
+README_zOS.txt for version 7.4 of Vim: Vi IMproved.
 
 This readme explains how to build Vim on z/OS.  Formerly called OS/390.
 See "README.txt" for general information about Vim.
@@ -29,7 +29,7 @@ console version).
 Compiling:
 ==========
 
-Vim can be compiled with or without GUI support. For 7.3 only the compilation
+Vim can be compiled with or without GUI support. For 7.4 only the compilation
 without GUI was tested. Below is a section about compiling with X11 but this
 is from an earlier version of Vim.
 
@@ -78,7 +78,7 @@ Change to the vim directory and do:
 With X11:
 ---------
 
-WARNING: This instruction was not tested with Vim 7.3.
+WARNING: This instruction was not tested with Vim 7.4.
 
 There are two ways for building VIM with X11 support. The first way is simple
 and results in a big executable (~13 Mb), the second needs a few additional

README_src.txt

@@ -1,10 +1,8 @@
-README_src.txt for version 7.3 of Vim: Vi IMproved.
+README_src.txt for version 7.4 of Vim: Vi IMproved.
 
 The source archive contains the files needed to compile Vim on Unix systems.
-It is packed for Unix systems (NL line separator).  It is also used for other
-systems in combination with the extra archive (vim-7.3-extra.tar.gz, in the
-"extra" directory of ftp.vim.org).
+It is packed for Unix systems (NL line separator).
 
 For more information, see the README.txt file that comes with the runtime
-archive (vim-7.3-rt.tar.gz).  To be able to run Vim you MUST get the runtime
+archive (vim-7.4-rt.tar.gz).  To be able to run Vim you MUST get the runtime
 archive too!

README_srcdos.txt

@@ -1,8 +1,8 @@
-README_srcdos.txt for version 7.3 of Vim: Vi IMproved.
+README_srcdos.txt for version 7.4 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim73rt.zip).
+These files are in the runtime archive (vim74rt.zip).
 
 
 The DOS source archive contains the files needed to compile Vim on MS-DOS or

README_unix.txt

@@ -1,4 +1,4 @@
-README_unix.txt for version 7.3 of Vim: Vi IMproved.
+README_unix.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Unix systems.
 See "README.txt" for general information about Vim.

README_vms.txt

@@ -1,4 +1,4 @@
-README_vms.txt for version 7.3 of Vim: Vi IMproved.
+README_vms.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on VMS systems.
 See "README.txt" in the runtime archive for information about Vim.

README_w32s.txt

@@ -1,4 +1,4 @@
-README_w32s.txt for version 7.3 of Vim: Vi IMproved.
+README_w32s.txt for version 7.4 of Vim: Vi IMproved.
 
 This archive contains the gvim.exe that was specifically compiled for use in
 the Win32s subsystem in MS-Windows 3.1 and 3.11.

nsis/gvim.nsi

@@ -1,11 +1,11 @@
 # NSIS file to create a self-installing exe for Vim.
 # It requires NSIS version 2.0 or later.
-# Last Change:	2010 Jul 30
+# Last Change:	2014 Nov 5
 
 # WARNING: if you make changes to this script, look out for $0 to be valid,
 # because uninstall deletes most files in $0.
 
-# Location of gvim_ole.exe, vimd32.exe, GvimExt/*, etc.
+# Location of gvim_ole.exe, vimw32.exe, GvimExt/*, etc.
 !define VIMSRC "..\src"
 
 # Location of runtime files
@@ -22,7 +22,7 @@
 !define HAVE_NLS
 
 !define VER_MAJOR 7
-!define VER_MINOR 3
+!define VER_MINOR 4
 
 # ----------- No configurable settings below this line -----------
 
@@ -38,9 +38,9 @@ SetDatablockOptimize on
 RequestExecutionLevel highest
 
 ComponentText "This will install Vim ${VER_MAJOR}.${VER_MINOR} on your computer."
-DirText "Choose a directory to install Vim (must end in 'vim')"
+DirText "Choose a directory to install Vim (should contain 'vim')"
 Icon icons\vim_16c.ico
-# NSIS2 uses a different strategy with six diferent images in a strip...
+# NSIS2 uses a different strategy with six different images in a strip...
 #EnabledBitmap icons\enabled.bmp
 #DisabledBitmap icons\disabled.bmp
 UninstallText "This will uninstall Vim ${VER_MAJOR}.${VER_MINOR} from your system."
@@ -56,6 +56,9 @@ LicenseData ${VIMRT}\doc\uganda.nsis.txt
   !packhdr temp.dat "upx --best --compress-icons=1 temp.dat"
 !endif
 
+SetCompressor /SOLID lzma
+XPStyle on
+
 # This adds '\vim' to the user choice automagically.  The actual value is
 # obtained below with ReadINIStr.
 InstallDir "$PROGRAMFILES\Vim"
@@ -132,11 +135,6 @@ FunctionEnd
 # We only accept the directory if it ends in "vim".  Using .onVerifyInstDir has
 # the disadvantage that the browse dialog is difficult to use.
 Function CheckInstallDir
-  StrCpy $0 $INSTDIR 3 -3
-  StrCmp $0 "vim" PathGood
-    MessageBox MB_OK "The path must end in 'vim'."
-    Abort
-  PathGood:
 FunctionEnd
 
 Function .onInstSuccess
@@ -247,11 +245,10 @@ Section "Vim console program (vim.exe)"
 	ReadRegStr $R0 HKLM \
 	   "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion
 	IfErrors 0 lbl_winnt
-	    # Windows 95/98/ME
-	    File /oname=vim.exe ${VIMSRC}\vimd32.exe
+	    # Windows 95/98/ME: not supported
 	    Goto lbl_done
 	lbl_winnt:
-	    # Windows NT/2000/XT
+	    # Windows NT/2000/XP and later
 	    File /oname=vim.exe ${VIMSRC}\vimw32.exe
 	lbl_done:
 	StrCpy $2 "$2 vim view vimdiff"

runtime/autoload/getscript.vim

@@ -1,8 +1,8 @@
 " ---------------------------------------------------------------------
 " getscript.vim
 "  Author:	Charles E. Campbell
-"  Date:	Apr 17, 2013
-"  Version:	35
+"  Date:	Jan 21, 2014
+"  Version:	36
 "  Installing:	:help glvs-install
 "  Usage:	:help glvs
 "
@@ -15,7 +15,7 @@
 if exists("g:loaded_getscript")
  finish
 endif
-let g:loaded_getscript= "v35"
+let g:loaded_getscript= "v36"
 if &cp
  echoerr "GetLatestVimScripts is not vi-compatible; not loaded (you need to set nocp)"
  finish
@@ -208,8 +208,8 @@ fun! getscript#GetLatestVimScripts()
   let lastline    = line("$")
 "  call Decho("lastline#".lastline)
   let firstdir    = substitute(&rtp,',.*$','','')
-  let plugins     = split(globpath(firstdir,"plugin/*.vim"),'\n')
-  let plugins     = plugins + split(globpath(firstdir,"AsNeeded/*.vim"),'\n')
+  let plugins     = split(globpath(firstdir,"plugin/**/*.vim"),'\n')
+  let plugins     = plugins + split(globpath(firstdir,"AsNeeded/**/*.vim"),'\n')
   let foundscript = 0
 
   " this loop updates the GetLatestVimScripts.dat file

runtime/autoload/gzip.vim

@@ -1,6 +1,6 @@
 " Vim autoload file for editing compressed files.
 " Maintainer: Bram Moolenaar <Bram@vim.org>
-" Last Change: 2008 Jul 04
+" Last Change: 2014 Nov 05
 
 " These functions are used by the gzip plugin.
 
@@ -120,6 +120,8 @@ fun gzip#read(cmd)
     silent! exe "bwipe " . tmp_esc
     silent! exe "bwipe " . tmpe_esc
   endif
+  " Store the OK flag, so that we can use it when writing.
+  let b:uncompressOk = ok
 
   " Restore saved option values.
   let &pm = pm_save
@@ -146,8 +148,10 @@ endfun
 
 " After writing compressed file: Compress written file with "cmd"
 fun gzip#write(cmd)
+  if exists('b:uncompressOk') && !b:uncompressOk
+    echomsg "Not compressing file because uncompress failed; reset b:uncompressOk to compress anyway"
   " don't do anything if the cmd is not supported
-  if s:check(a:cmd)
+  elseif s:check(a:cmd)
     " Rename the file before compressing it.
     let nm = resolve(expand("<afile>"))
     let nmt = s:tempname(nm)

runtime/autoload/htmlcomplete.vim

@@ -1,7 +1,49 @@
 " Vim completion script
 " Language:	HTML and XHTML
 " Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2011 Apr 28
+" Last Change:	2014 Jun 20
+
+" Distinguish between HTML versions.
+" To use with other HTML versions add another "elseif" condition to match
+" proper DOCTYPE.
+function! htmlcomplete#DetectOmniFlavor()
+  if &filetype == 'xhtml'
+    let b:html_omni_flavor = 'xhtml10s'
+  else
+    let b:html_omni_flavor = 'html401t'
+  endif
+  let i = 1
+  let line = ""
+  while i < 10 && i < line("$")
+    let line = getline(i)
+    if line =~ '<!DOCTYPE.*\<DTD '
+      break
+    endif
+    let i += 1
+  endwhile
+  if line =~ '<!DOCTYPE.*\<DTD '  " doctype line found above
+    if line =~ ' HTML 3\.2'
+      let b:html_omni_flavor = 'html32'
+    elseif line =~ ' XHTML 1\.1'
+      let b:html_omni_flavor = 'xhtml11'
+    else    " two-step detection with strict/frameset/transitional
+      if line =~ ' XHTML 1\.0'
+	let b:html_omni_flavor = 'xhtml10'
+      elseif line =~ ' HTML 4\.01'
+	let b:html_omni_flavor = 'html401'
+      elseif line =~ ' HTML 4.0\>'
+	let b:html_omni_flavor = 'html40'
+      endif
+      if line =~ '\<Transitional\>'
+	let b:html_omni_flavor .= 't'
+      elseif line =~ '\<Frameset\>'
+	let b:html_omni_flavor .= 'f'
+      else
+	let b:html_omni_flavor .= 's'
+      endif
+    endif
+  endif
+endfunction
 
 function! htmlcomplete#CompleteTags(findstart, base)
   if a:findstart

runtime/autoload/netrwSettings.vim

@@ -1,7 +1,7 @@
 " netrwSettings.vim: makes netrw settings simpler
-" Date:		May 03, 2013
+" Date:		Dec 30, 2014
 " Maintainer:	Charles E Campbell <drchipNOSPAM at campbellfamily dot biz>
-" Version:	14a	ASTRO-ONLY
+" Version:	15
 " Copyright:    Copyright (C) 1999-2007 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
 "               with or without modifications, provided that this copyright
@@ -19,7 +19,7 @@
 if exists("g:loaded_netrwSettings") || &cp
   finish
 endif
-let g:loaded_netrwSettings = "v14a"
+let g:loaded_netrwSettings = "v15"
 if v:version < 700
  echohl WarningMsg
  echo "***warning*** this version of netrwSettings needs vim 7.0"
@@ -31,7 +31,7 @@ endif
 " NetrwSettings: {{{1
 fun! netrwSettings#NetrwSettings()
   " this call is here largely just to insure that netrw has been loaded
-  call netrw#NetrwSavePosn()
+  call netrw#SavePosn()
   if !exists("g:loaded_netrw")
    echohl WarningMsg | echomsg "***sorry*** netrw needs to be loaded prior to using NetrwSettings" | echohl None
    return
@@ -98,6 +98,11 @@ fun! netrwSettings#NetrwSettings()
 
   put = ''
   put ='+ Netrw Browser Control'
+  if exists("g:netrw_altfile")
+   put = 'let g:netrw_altfile   = '.g:netrw_altfile
+  else
+   put = 'let g:netrw_altfile   = 0'
+  endif
   put = 'let g:netrw_alto              = '.g:netrw_alto
   put = 'let g:netrw_altv              = '.g:netrw_altv
   put = 'let g:netrw_banner            = '.g:netrw_banner
@@ -172,6 +177,7 @@ fun! netrwSettings#NetrwSettings()
   put = 'let g:netrw_sort_direction    = '.g:netrw_sort_direction
   put = 'let g:netrw_sort_options      = '.g:netrw_sort_options
   put = 'let g:netrw_sort_sequence     = '.g:netrw_sort_sequence
+  put = 'let g:netrw_servername        = '.g:netrw_servername
   put = 'let g:netrw_special_syntax    = '.g:netrw_special_syntax
   put = 'let g:netrw_ssh_browse_reject = '.g:netrw_ssh_browse_reject
   put = 'let g:netrw_ssh_cmd           = '.g:netrw_ssh_cmd

runtime/autoload/netrw_gitignore.vim

@@ -0,0 +1,78 @@
+" netrw_gitignore#Hide: gitignore-based hiding
+"  Function returns a string of comma separated patterns convenient for
+"  assignment to `g:netrw_list_hide` option.
+"  Function can take additional filenames as arguments, example:
+"  netrw_gitignore#Hide('custom_gitignore1', 'custom_gitignore2')
+"
+" Usage examples:
+"  let g:netrw_list_hide = netrw_gitignore#Hide()
+"  let g:netrw_list_hide = netrw_gitignore#Hide() . 'more,hide,patterns'
+"
+" Copyright:    Copyright (C) 2013 Bruno Sutic {{{1
+"               Permission is hereby granted to use and distribute this code,
+"               with or without modifications, provided that this copyright
+"               notice is copied with it. Like anything else that's free,
+"               netrw_gitignore.vim is provided *as is* and comes with no
+"               warranty of any kind, either expressed or implied. By using
+"               this plugin, you agree that in no event will the copyright
+"               holder be liable for any damages resulting from the use
+"               of this software.
+function! netrw_gitignore#Hide(...)
+  let additional_files = a:000
+
+  let default_files = ['.gitignore', '.git/info/exclude']
+
+  " get existing global/system gitignore files
+  let global_gitignore = expand(substitute(system("git config --global core.excludesfile"), '\n', '', 'g'))
+  if global_gitignore !=# ''
+    let default_files = add(default_files, global_gitignore)
+  endif
+  let system_gitignore = expand(substitute(system("git config --system core.excludesfile"), '\n', '', 'g'))
+  if system_gitignore !=# ''
+    let default_files = add(default_files, system_gitignore)
+  endif
+
+  " append additional files if given as function arguments
+  if additional_files !=# []
+    let files = extend(default_files, additional_files)
+  else
+    let files = default_files
+  endif
+
+  " keep only existing/readable files
+  let gitignore_files = []
+  for file in files
+    if filereadable(file)
+      let gitignore_files = add(gitignore_files, file)
+    endif
+  endfor
+
+  " get contents of gitignore patterns from those files
+  let gitignore_lines = []
+  for file in gitignore_files
+    for line in readfile(file)
+      " filter empty lines and comments
+      if line !~# '^#' && line !~# '^$'
+        let gitignore_lines = add(gitignore_lines, line)
+      endif
+    endfor
+  endfor
+
+  " convert gitignore patterns to Netrw/Vim regex patterns
+  let escaped_lines = []
+  for line in gitignore_lines
+    let escaped = line
+    let escaped = substitute(escaped, '\*\*', '*', 'g')
+    let escaped = substitute(escaped, '\.', '\\.', 'g')
+    let escaped = substitute(escaped, '\$', '\\$', 'g')
+    let escaped = substitute(escaped, '*', '.*', 'g')
+    " correction: dot, dollar and asterisks chars shouldn't be escaped when
+    " within regex matching groups.
+    let escaped = substitute(escaped, '\(\[[^]]*\)\zs\\\.', '\.', 'g')
+    let escaped = substitute(escaped, '\(\[[^]]*\)\zs\\\$', '\$', 'g')
+    let escaped = substitute(escaped, '\(\[[^]]*\)\zs\.\*', '*', 'g')
+    let escaped_lines = add(escaped_lines, escaped)
+  endfor
+
+  return join(escaped_lines, ',')
+endfunction

runtime/autoload/rubycomplete.vim

@@ -1,9 +1,7 @@
 " Vim completion script
 " Language:             Ruby
 " Maintainer:           Mark Guzman <segfault@hasno.info>
-" Last Change:          2009 Sep 28
-" URL:                  http://vim-ruby.rubyforge.org
-" Anon CVS:             See above site
+" URL:                  https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:  Doug Kearns <dougkearns@gmail.com>
 " Maintainer Version:   0.8.1
 " ----------------------------------------------------------------------------
@@ -12,16 +10,23 @@
 " ----------------------------------------------------------------------------
 
 " {{{ requirement checks
+
+function! s:ErrMsg(msg)
+    echohl ErrorMsg
+    echo a:msg
+    echohl None
+endfunction
+
 if !has('ruby')
-    s:ErrMsg( "Error: Rubycomplete requires vim compiled with +ruby" )
-    s:ErrMsg( "Error: falling back to syntax completion" )
+    call s:ErrMsg( "Error: Rubycomplete requires vim compiled with +ruby" )
+    call s:ErrMsg( "Error: falling back to syntax completion" )
     " lets fall back to syntax completion
     setlocal omnifunc=syntaxcomplete#Complete
     finish
 endif
 
 if version < 700
-    s:ErrMsg( "Error: Required vim >= 7.0" )
+    call s:ErrMsg( "Error: Required vim >= 7.0" )
     finish
 endif
 " }}} requirement checks
@@ -51,12 +56,6 @@ endif
 " {{{ vim-side support functions
 let s:rubycomplete_debug = 0
 
-function! s:ErrMsg(msg)
-    echohl ErrorMsg
-    echo a:msg
-    echohl None
-endfunction
-
 function! s:dprint(msg)
     if s:rubycomplete_debug == 1
         echom a:msg
@@ -133,7 +132,7 @@ function! s:GetRubyVarType(v)
     let stopline = 1
     let vtp = ''
     let pos = getpos('.')
-    let sstr = '^\s*#\s*@var\s*'.a:v.'\>\s\+[^ \t]\+\s*$'
+    let sstr = '^\s*#\s*@var\s*'.escape(a:v, '*').'\>\s\+[^ \t]\+\s*$'
     let [lnum,lcol] = searchpos(sstr,'nb',stopline)
     if lnum != 0 && lcol != 0
         call setpos('.',pos)
@@ -275,7 +274,7 @@ class VimRubyCompletion
     pare = /^\s*class\s*(.*)\s*<\s*(.*)\s*\n/.match( classdef )
     load_buffer_class( $2 ) if pare != nil  && $2 != name # load parent class if needed
 
-    mixre = /.*\n\s*include\s*(.*)\s*\n/.match( classdef )
+    mixre = /.*\n\s*(include|prepend)\s*(.*)\s*\n/.match( classdef )
     load_buffer_module( $2 ) if mixre != nil && $2 != name # load mixins if needed
 
     begin
@@ -364,6 +363,10 @@ class VimRubyCompletion
     print txt if @@debug
   end
 
+  def escape_vim_singlequote_string(str)
+    str.to_s.gsub(/'/,"\\'")
+  end
+
   def get_buffer_entity_list( type )
     # this will be a little expensive.
     loading_allowed = VIM::evaluate("exists('g:rubycomplete_buffer_loading') && g:rubycomplete_buffer_loading")
@@ -526,9 +529,9 @@ class VimRubyCompletion
   end
 
   def clean_sel(sel, msg)
-    sel.delete_if { |x| x == nil }
-    sel.uniq!
-    sel.grep(/^#{Regexp.quote(msg)}/) if msg != nil
+    ret = sel.reject{|x|x.nil?}.uniq
+    ret = ret.grep(/^#{Regexp.quote(msg)}/) if msg != nil
+    ret
   end
 
   def get_rails_view_methods
@@ -767,10 +770,10 @@ class VimRubyCompletion
     constants = clean_sel( constants, message )
 
     valid = []
-    valid += methods.collect { |m| { :name => m, :type => 'm' } }
-    valid += variables.collect { |v| { :name => v, :type => 'v' } }
-    valid += classes.collect { |c| { :name => c, :type => 't' } }
-    valid += constants.collect { |d| { :name => d, :type => 'd' } }
+    valid += methods.collect { |m| { :name => m.to_s, :type => 'm' } }
+    valid += variables.collect { |v| { :name => v.to_s, :type => 'v' } }
+    valid += classes.collect { |c| { :name => c.to_s, :type => 't' } }
+    valid += constants.collect { |d| { :name => d.to_s, :type => 'd' } }
     valid.sort! { |x,y| x[:name] <=> y[:name] }
 
     outp = ""
@@ -779,7 +782,7 @@ class VimRubyCompletion
     rg.step(150) do |x|
       stpos = 0+x
       enpos = 150+x
-      valid[stpos..enpos].each { |c| outp += "{'word':'%s','item':'%s','kind':'%s'}," % [ c[:name], c[:name], c[:type] ] }
+      valid[stpos..enpos].each { |c| outp += "{'word':'%s','item':'%s','kind':'%s'}," % [ c[:name], c[:name], c[:type] ].map{|x|escape_vim_singlequote_string(x)} }
       outp.sub!(/,$/, '')
 
       VIM::command("call extend(g:rubycomplete_completions, [%s])" % outp)

runtime/autoload/tohtml.vim

@@ -1,6 +1,6 @@
 " Vim autoload file for the tohtml plugin.
 " Maintainer: Ben Fritz <fritzophrenic@gmail.com>
-" Last Change: 2012 Jun 30
+" Last Change: 2013 Jun 19
 "
 " Additional contributors:
 "
@@ -401,15 +401,15 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
   call add(html, '</head>')
   let body_line_num = len(html)
   if !empty(s:settings.prevent_copy)
-    call add(html, "<body onload='FixCharWidth();'>")
+    call add(html, "<body onload='FixCharWidth();".(s:settings.line_ids ? " JumpToLine();" : "")."'>")
     call add(html, "<!-- hidden divs used by javascript to get the width of a char -->")
     call add(html, "<div id='oneCharWidth'>0</div>")
     call add(html, "<div id='oneInputWidth'><input size='1' value='0'".tag_close."</div>")
     call add(html, "<div id='oneEmWidth' style='width: 1em;'></div>")
   else
-    call add(html, '<body>')
+    call add(html, '<body'.(s:settings.line_ids ? ' onload="JumpToLine();"' : '').'>')
   endif
-  call add(html, "<table border='1' width='100%' id='vimCodeElement'>")
+  call add(html, "<table border='1' width='100%' id='vimCodeElement".s:settings.id_suffix."'>")
 
   call add(html, '<tr>')
   for buf in a:win_list
@@ -475,7 +475,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     let temp = getline(1,'$')
     " clean out id on the main content container because we already set it on
     " the table
-    let temp[0] = substitute(temp[0], " id='vimCodeElement'", "", "")
+    let temp[0] = substitute(temp[0], " id='vimCodeElement[^']*'", "", "")
     " undo deletion of start and end part
     " so we can later save the file as valid html
     " TODO: restore using grabbed lines if undolevel is 1?
@@ -503,6 +503,11 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
   call add(html, s:body_end_line)
   call add(html, '</html>')
 
+  " The generated HTML is admittedly ugly and takes a LONG time to fold.
+  " Make sure the user doesn't do syntax folding when loading a generated file,
+  " using a modeline.
+  call add(html, '<!-- vim: set foldmethod=manual : -->')
+
   let i = 1
   let name = "Diff" . (s:settings.use_xhtml ? ".xhtml" : ".html")
   " Find an unused file name if current file name is already in use
@@ -539,14 +544,12 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     " add required javascript in reverse order so we can just call append again
     " and again without adjusting {{{
 
-    " insert script closing tag if any javascript is needed
-    if s:settings.dynamic_folds || !empty(s:settings.prevent_copy)
-      call append(style_start, [
-	    \ '',
-	    \ s:settings.use_xhtml ? '//]]>' : '-->',
-	    \ "</script>"
-	    \ ])
-    endif
+    " insert script closing tag
+    call append(style_start, [
+	  \ '',
+	  \ s:settings.use_xhtml ? '//]]>' : '-->',
+	  \ "</script>"
+	  \ ])
 
     " insert script which corrects the size of small input elements in
     " prevent_copy mode. See 2html.vim for details on why this is needed and how
@@ -565,13 +568,62 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ '  var emWidth = document.getElementById("oneEmWidth").clientWidth;',
 	    \ '  if (inputWidth > goodWidth) {',
 	    \ '    while (ratio < 100*goodWidth/emWidth && ratio < 100) {',
-	    \ '    ratio += 5;',
-	    \ '  }',
-	    \ '  document.getElementById("vimCodeElement").className = "em"+ratio;',
+	    \ '      ratio += 5;',
+	    \ '    }',
+	    \ '    document.getElementById("vimCodeElement'.s:settings.id_suffix.'").className = "em"+ratio;',
 	    \ '  }',
 	    \ '}'
 	    \ ])
     endif
+    "
+    " insert javascript to get IDs from line numbers, and to open a fold before
+    " jumping to any lines contained therein
+    call append(style_start, [
+	  \ "  /* Always jump to new location even if the line was hidden inside a fold, or",
+	  \ "   * we corrected the raw number to a line ID.",
+	  \ "   */",
+	  \ "  if (lineElem) {",
+	  \ "    lineElem.scrollIntoView(true);",
+	  \ "  }",
+	  \ "  return true;",
+	  \ "}",
+	  \ "if ('onhashchange' in window) {",
+	  \ "  window.onhashchange = JumpToLine;",
+	  \ "}"
+	  \ ])
+    if s:settings.dynamic_folds
+      call append(style_start, [
+	    \ "",
+	    \ "  /* navigate upwards in the DOM tree to open all folds containing the line */",
+	    \ "  var node = lineElem;",
+	    \ "  while (node && node.id != 'vimCodeElement".s:settings.id_suffix."')",
+	    \ "  {",
+	    \ "    if (node.className == 'closed-fold')",
+	    \ "    {",
+	    \ "      /* toggle open the fold ID (remove window ID) */",
+	    \ "      toggleFold(node.id.substr(4));",
+	    \ "    }",
+	    \ "    node = node.parentNode;",
+	    \ "  }",
+	    \ ])
+    endif
+    call append(style_start, [
+	  \ "",
+	  \ "/* function to open any folds containing a jumped-to line before jumping to it */",
+	  \ "function JumpToLine()",
+	  \ "{",
+	  \ "  var lineNum;",
+	  \ "  lineNum = window.location.hash;",
+	  \ "  lineNum = lineNum.substr(1); /* strip off '#' */",
+	  \ "",
+	  \ "  if (lineNum.indexOf('L') == -1) {",
+	  \ "    lineNum = 'L'+lineNum;",
+	  \ "  }",
+	  \ "  if (lineNum.indexOf('W') == -1) {",
+	  \ "    lineNum = 'W1'+lineNum;",
+	  \ "  }",
+	  \ "  lineElem = document.getElementById(lineNum);"
+	  \ ])
 
     " Insert javascript to toggle matching folds open and closed in all windows,
     " if dynamic folding is active.
@@ -596,12 +648,11 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ ])
     endif
 
-    " insert script tag if any javascript is needed
-    if s:settings.dynamic_folds || s:settings.prevent_copy != ""
-      call append(style_start, [
-	    \ "<script type='text/javascript'>",
-	    \ s:settings.use_xhtml ? '//<![CDATA[' : "<!--"])
-    endif "}}}
+    " insert script tag; javascript is always needed for the line number
+    " normalization for URL hashes
+    call append(style_start, [
+	  \ "<script type='text/javascript'>",
+	  \ s:settings.use_xhtml ? '//<![CDATA[' : "<!--"])
 
     " Insert styles from all the generated html documents and additional styles
     " for the table-based layout of the side-by-side diff. The diff should take
@@ -671,6 +722,7 @@ func! tohtml#GetUserSettings() "{{{
     call tohtml#GetOption(user_settings,     'no_invalid', 0 )
     call tohtml#GetOption(user_settings,   'whole_filler', 0 )
     call tohtml#GetOption(user_settings,      'use_xhtml', 0 )
+    call tohtml#GetOption(user_settings,       'line_ids', user_settings.number_lines )
     " }}}
     
     " override those settings that need it {{{
@@ -804,6 +856,20 @@ func! tohtml#GetUserSettings() "{{{
       let user_settings.no_invalid = 0
     endif
 
+    if exists('g:html_id_expr')
+      let user_settings.id_suffix = eval(g:html_id_expr)
+      if user_settings.id_suffix !~ '^[-_:.A-Za-z0-9]*$'
+	echohl WarningMsg
+	echomsg '2html: g:html_id_expr evaluated to invalid string for HTML id attributes'
+	echomsg '2html: Omitting user-specified suffix'
+	echohl None
+	sleep 3
+	let user_settings.id_suffix=""
+      endif
+    else
+      let user_settings.id_suffix=""
+    endif
+
     " TODO: font
 
     return user_settings

runtime/autoload/xmlcomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	XML
 " Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2006 Aug 15
+" Last Change:	2013 Jun 29
 " Version: 1.9
 "
 " Changelog:
@@ -475,12 +475,12 @@ function! s:InCommentAt(line, col)
 endfunction
 
 function! s:SetKeywords()
-	let g:IsKeywordBak=&iskeyword
-	let &iskeyword='33-255'
+	let s:IsKeywordBak=&l:iskeyword
+	let &l:iskeyword='33-255'
 endfunction
 
 function! s:RestoreKeywords()
-	let &iskeyword=g:IsKeywordBak
+	let &l:iskeyword=s:IsKeywordBak
 endfunction
 
 function! s:Push(el, sname)

runtime/autoload/zip.vim

@@ -1,10 +1,10 @@
 " zip.vim: Handles browsing zipfiles
 "            AUTOLOAD PORTION
-" Date:		Apr 17, 2013
-" Version:	26
+" Date:		Jul 02, 2013
+" Version:	27
 " Maintainer:	Charles E Campbell <NdrOchip@ScampbellPfamily.AbizM-NOSPAM>
 " License:	Vim License  (see vim's :help license)
-" Copyright:    Copyright (C) 2005-2012 Charles E. Campbell {{{1
+" Copyright:    Copyright (C) 2005-2013 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
 "               with or without modifications, provided that this copyright
 "               notice is copied with it. Like anything else that's free,
@@ -13,13 +13,14 @@
 "               this plugin, you agree that in no event will the copyright
 "               holder be liable for any damages resulting from the use
 "               of this software.
+"redraw!|call DechoSep()|call inputsave()|call input("Press <cr> to continue")|call inputrestore()
 
 " ---------------------------------------------------------------------
 " Load Once: {{{1
 if &cp || exists("g:loaded_zip")
  finish
 endif
-let g:loaded_zip= "v26"
+let g:loaded_zip= "v27"
 if v:version < 702
  echohl WarningMsg
  echo "***warning*** this version of zip needs vim 7.2"
@@ -28,6 +29,7 @@ if v:version < 702
 endif
 let s:keepcpo= &cpo
 set cpo&vim
+"DechoTabOn
 
 let s:zipfile_escape = ' ?&;\'
 let s:ERROR          = 2
@@ -60,6 +62,16 @@ endif
 " zip#Browse: {{{2
 fun! zip#Browse(zipfile)
 "  call Dfunc("zip#Browse(zipfile<".a:zipfile.">)")
+  " sanity check: insure that the zipfile has "PK" as its first two letters
+  "               (zipped files have a leading PK as a "magic cookie")
+  if !filereadable(a:zipfile) || readfile(a:zipfile, "", 1)[0] !~ '^PK'
+   exe "noautocmd e ".fnameescape(a:zipfile)
+"   call Dret("zip#Browse : not a zipfile<".a:zipfile.">")
+   return
+"  else        " Decho
+"   call Decho("zip#Browse: a:zipfile<".a:zipfile."> passed PK test - its a zip file")
+  endif
+
   let repkeep= &report
   set report=10
 
@@ -197,6 +209,7 @@ fun! zip#Read(fname,mode)
   "   exe "keepj sil! r! ".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1)
   " but allows zipfile:... entries in quickfix lists
   let temp = tempname()
+"  call Decho("using temp file<".temp.">")
   let fn   = expand('%:p')
   exe "sil! !".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1).' > '.temp
 "  call Decho("exe sil! !".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1).' > '.temp)
@@ -208,7 +221,7 @@ fun! zip#Read(fname,mode)
   filetype detect
 
   " cleanup
-  keepj 0d
+  "  keepj 0d   " used to be needed for the ...r! ... method
   set nomod
 
   let &report= repkeep

runtime/colors/README.txt

@@ -36,6 +36,14 @@ Some attributes (e.g., bold) might be set in the defaults that you want
 removed in your color scheme.  Use something like "gui=NONE" to remove the
 attributes.
 
+In case you want to set 'background' depending on the colorscheme selected,
+this autocmd might be useful:
+     autocmd SourcePre */colors/blue_sky.vim set background=dark
+Replace "blue_sky" with the name of the colorscheme.
+
+In case you want to tweak a colorscheme after it was loaded, check out that
+ColorScheme autocmd event.
+
 To see which highlight group is used where, find the help for
 "highlight-groups" and "group-name".
 

runtime/colors/delek.vim

@@ -1,10 +1,10 @@
 " Vim color file
-" Maintainer:	David Schweikert <dws@ee.ethz.ch>
-" Last Change:	2006 Apr 30
+" Maintainer:	David Schweikert <david@schweikert.ch>
+" Last Change:	2014 Mar 19
 
 hi clear
 
-let colors_name = "delek"
+let g:colors_name = "delek"
 
 " Normal should come first
 hi Normal     guifg=Black  guibg=White
@@ -28,7 +28,11 @@ hi NonText    ctermfg=Blue	   gui=bold guifg=gray guibg=white
 hi Pmenu      guibg=LightBlue
 hi PmenuSel   ctermfg=White	   ctermbg=DarkBlue  guifg=White  guibg=DarkBlue
 hi Question   ctermfg=DarkGreen    gui=bold guifg=SeaGreen
-hi Search     ctermfg=NONE	   ctermbg=Yellow guibg=Yellow guifg=NONE
+if &background == "light"
+    hi Search     ctermfg=NONE	   ctermbg=Yellow guibg=Yellow guifg=NONE
+else
+    hi Search     ctermfg=Black	   ctermbg=Yellow guibg=Yellow guifg=Black
+endif
 hi SpecialKey ctermfg=DarkBlue	   guifg=Blue
 hi StatusLine cterm=bold	   ctermbg=blue ctermfg=yellow guibg=gold guifg=blue
 hi StatusLineNC	cterm=bold	   ctermbg=blue ctermfg=black  guibg=gold guifg=blue

runtime/colors/industry.vim

@@ -0,0 +1,40 @@
+" Vim color file
+" Maintainer:	Shian Lee 
+" Last Change:	2014 Mar 6 (for vim 7.4)
+" Remark:	"industry" stands for 'industrial' color scheme. In industrial
+"		HMI (Human-Machine-Interface) programming, using a standard color
+"               scheme is mandatory in many cases (in traffic-lights for example): 
+"               LIGHT_RED is	    'Warning' 
+"               LIGHT_YELLOW is	    'Attention' 
+"               LIGHT_GREEN is	    'Normal' 
+"               LIGHT_MAGENTA is    'Warning-Attention' (light RED-YELLOW)
+"               LIGHT_CYAN is	    'Attention-Normal'  (light YELLOW-GREEN).
+"               BLACK is	    Dark-High-Contrast Background for maximum safety.
+"               BLUE is		    Shade of BLACK (not supposed to get attention).
+"
+"               Industrial color scheme is by nature clear, safe and productive. 
+"               Yet, depends on the file type's syntax, it might appear incorrect. 
+
+" Reset to dark background, then reset everything to defaults:
+set background=dark
+highlight clear
+if exists("syntax_on")
+    syntax reset
+endif
+
+let colors_name = "industry"
+
+" First set Normal to regular white on black text colors:
+hi Normal ctermfg=LightGray ctermbg=Black guifg=#dddddd	guibg=Black
+
+" Syntax highlighting (other color-groups using default, see :help group-name):
+hi Comment    cterm=NONE ctermfg=DarkCyan    	gui=NONE guifg=#00aaaa   	 
+hi Constant   cterm=NONE ctermfg=LightCyan   	gui=NONE guifg=#00ffff   	
+hi Identifier cterm=NONE ctermfg=LightMagenta   gui=NONE guifg=#ff00ff   
+hi Function   cterm=NONE ctermfg=LightGreen   	gui=NONE guifg=#00ff00   	
+hi Statement  cterm=NONE ctermfg=White	     	gui=bold guifg=#ffffff	     	
+hi PreProc    cterm=NONE ctermfg=Yellow		gui=NONE guifg=#ffff00 	
+hi Type	      cterm=NONE ctermfg=LightGreen	gui=bold guifg=#00ff00 		
+hi Special    cterm=NONE ctermfg=LightRed    	gui=NONE guifg=#ff0000    	
+hi Delimiter  cterm=NONE ctermfg=Yellow    	gui=NONE guifg=#ffff00    	
+

runtime/colors/koehler.vim

@@ -2,7 +2,7 @@
 " vim: tw=0 ts=4 sw=4
 " Vim color file
 " Maintainer:	Ron Aaron <ron@ronware.org>
-" Last Change:	2006 Dec 10
+" Last Change:	2013 May 23
 
 hi clear
 set background=dark
@@ -43,6 +43,8 @@ hi MatchParen	  term=reverse  ctermfg=blue guibg=Blue
 hi TabLine		  term=bold,reverse  cterm=bold ctermfg=lightblue ctermbg=white gui=bold guifg=blue guibg=white
 hi TabLineFill	  term=bold,reverse  cterm=bold ctermfg=lightblue ctermbg=white gui=bold guifg=blue guibg=white
 hi TabLineSel	  term=reverse	ctermfg=white ctermbg=lightblue guifg=white guibg=blue
+hi Underlined	  term=underline cterm=bold,underline ctermfg=lightblue guifg=lightblue gui=bold,underline
+hi Ignore		  ctermfg=black ctermbg=black guifg=black guibg=black
 hi link IncSearch		Visual
 hi link String			Constant
 hi link Character		Constant

runtime/colors/ron.vim

@@ -2,7 +2,7 @@
 " vim: tw=0 ts=4 sw=4
 " Vim color file
 " Maintainer:	Ron Aaron <ron@ronware.org>
-" Last Change:	2003 May 02
+" Last Change:	2013 May 24
 
 set background=dark
 hi clear
@@ -11,7 +11,7 @@ if exists("syntax_on")
 endif
 let g:colors_name = "ron"
 hi Normal		guifg=cyan	guibg=black
-hi NonText		guifg=brown
+hi NonText		guifg=yellow guibg=#303030
 hi comment		guifg=green
 hi constant		guifg=cyan	gui=bold
 hi identifier	guifg=cyan	gui=NONE
@@ -24,10 +24,11 @@ hi WarningMsg	guifg=Black	guibg=Green
 hi Error		guibg=Red
 hi Todo			guifg=Black	guibg=orange
 hi Cursor		guibg=#60a060 guifg=#00ff00
-hi Search		guibg=lightslateblue
+hi Search		guibg=darkgray guifg=black gui=bold 
 hi IncSearch	gui=NONE guibg=steelblue
 hi LineNr		guifg=darkgrey
 hi title		guifg=darkgrey
+hi ShowMarksHL ctermfg=cyan ctermbg=lightblue cterm=bold guifg=yellow guibg=black  gui=bold
 hi StatusLineNC	gui=NONE guifg=lightblue guibg=darkblue
 hi StatusLine	gui=bold	guifg=cyan	guibg=blue
 hi label		guifg=gold2
@@ -41,3 +42,4 @@ hi DiffDelete   guibg=coral
 hi Folded		guibg=gray30
 hi FoldColumn	guibg=gray30 guifg=white
 hi cIf0			guifg=gray
+hi diffOnly	guifg=red gui=bold

runtime/compiler/checkstyle.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
 " Compiler:	Checkstyle
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/checkstyle.vim
-" Last Change:	2004 Nov 27
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jun 26
 
 if exists("current_compiler")
   finish
@@ -17,4 +16,4 @@ CompilerSet makeprg=java\ com.puppycrawl.tools.checkstyle.Main\ -f\ plain
 
 " sample error: WebTable.java:282: '+=' is not preceeded with whitespace.
 "		WebTable.java:201:1: '{' should be on the previous line.
-CompilerSet errorformat=%f:%l:\ %m,%f:%l:%v:\ %m,%-G%.%#
+CompilerSet errorformat=%f:%l:%v:\ %m,%f:%l:\ %m,%-G%.%#

runtime/compiler/eruby.vim

@@ -1,9 +1,7 @@
 " Vim compiler file
 " Language:		eRuby
 " Maintainer:		Doug Kearns <dougkearns@gmail.com>
-" Last Change:		2008 Aug 1
-" URL:			http://vim-ruby.rubyforge.org
-" Anon CVS:		See above site
+" URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
 
 if exists("current_compiler")

runtime/compiler/gcc.vim

@@ -25,10 +25,10 @@ CompilerSet errorformat=
       \%f:%l:\ %tarning:\ %m,
       \%f:%l:\ %m,
       \\"%f\"\\,\ line\ %l%*\\D%c%*[^\ ]\ %m,
-      \%D%*\\a[%*\\d]:\ Entering\ directory\ `%f',
-      \%X%*\\a[%*\\d]:\ Leaving\ directory\ `%f',
-      \%D%*\\a:\ Entering\ directory\ `%f',
-      \%X%*\\a:\ Leaving\ directory\ `%f',
+      \%D%*\\a[%*\\d]:\ Entering\ directory\ [`']%f',
+      \%X%*\\a[%*\\d]:\ Leaving\ directory\ [`']%f',
+      \%D%*\\a:\ Entering\ directory\ [`']%f',
+      \%X%*\\a:\ Leaving\ directory\ [`']%f',
       \%DMaking\ %*\\a\ in\ %f
 
 if exists('g:compiler_gcc_ignore_unmatched_lines')

runtime/compiler/go.vim

@@ -0,0 +1,29 @@
+" Vim compiler file
+" Compiler:	Go
+" Maintainer:	David Barnett (https://github.com/google/vim-ft-go)
+" Last Change:	2014 Aug 16
+
+if exists('current_compiler')
+  finish
+endif
+let current_compiler = 'go'
+
+if exists(':CompilerSet') != 2
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:save_cpo = &cpo
+set cpo-=C
+
+CompilerSet makeprg=go\ build
+CompilerSet errorformat=
+    \%-G#\ %.%#,
+    \%A%f:%l:%c:\ %m,
+    \%A%f:%l:\ %m,
+    \%C%*\\s%m,
+    \%-G%.%#
+
+let &cpo = s:save_cpo
+unlet s:save_cpo
+
+" vim: sw=2 sts=2 et

runtime/compiler/haml.vim

@@ -0,0 +1,28 @@
+" Vim compiler file
+" Compiler:	Haml
+" Maintainer:	Tim Pope <vimNOSPAM@tpope.org>
+" Last Change:	2013 May 30
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "haml"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo-=C
+
+CompilerSet makeprg=haml\ -c
+
+CompilerSet errorformat=
+      \Haml\ %trror\ on\ line\ %l:\ %m,
+      \Syntax\ %trror\ on\ line\ %l:\ %m,
+      \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim:set sw=2 sts=2:

runtime/compiler/javac.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
-" Compiler:     javac
-" Maintainer:   Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/javac.vim
-" Last Change:  2004 Nov 27
+" Compiler:	javac
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2004 Nov 27
 
 if exists("current_compiler")
   finish

runtime/compiler/msvc.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:	Miscrosoft Visual C
+" Compiler:	Microsoft Visual C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2005 Nov 30
+" Last Change:	2014 Sep 20
 
 if exists("current_compiler")
   finish

runtime/compiler/ocaml.vim

@@ -0,0 +1,44 @@
+" Vim Compiler File
+" Compiler:	ocaml
+" Maintainer:	See ftplugin/ocaml.vim (?)
+" Last Change:	June 2013 by Marc Weber
+"
+" Marc Weber's comments:
+" Setting makeprg doesn't make sense, because there is ocamlc, ocamlopt,
+" ocamake and whatnot. So which one to use?
+"
+" This error format was moved from ftplugin/ocaml.vim to this file,
+" because ftplugin is the wrong file to set an error format
+" and the error format itself is annoying because it joins many lines in this
+" error case:
+"
+"    Error: The implementation foo.ml does not match the interface foo.cmi:
+"    Modules do not match case.
+"
+" So having it here makes people opt-in
+
+
+if exists("current_compiler")
+    finish
+endif
+let current_compiler = "ocaml"
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet errorformat =
+      \%EFile\ \"%f\"\\,\ line\ %l\\,\ characters\ %c-%*\\d:,
+      \%EFile\ \"%f\"\\,\ line\ %l\\,\ character\ %c:%m,
+      \%+EReference\ to\ unbound\ regexp\ name\ %m,
+      \%Eocamlyacc:\ e\ -\ line\ %l\ of\ \"%f\"\\,\ %m,
+      \%Wocamlyacc:\ w\ -\ %m,
+      \%-Zmake%.%#,
+      \%C%m,
+      \%D%*\\a[%*\\d]:\ Entering\ directory\ `%f',
+      \%X%*\\a[%*\\d]:\ Leaving\ directory\ `%f',
+      \%D%*\\a:\ Entering\ directory\ `%f',
+      \%X%*\\a:\ Leaving\ directory\ `%f',
+      \%DMaking\ %*\\a\ in\ %f
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/php.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
-" Compiler:	PHP
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/php.vim
-" Last Change:	2004 Nov 27
+" Compiler:	PHP CLI
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jun 25
 
 if exists("current_compiler")
   finish
@@ -17,12 +16,11 @@ let s:cpo_save = &cpo
 set cpo-=C
 
 CompilerSet makeprg=php\ -lq
-
-CompilerSet errorformat=%E<b>Parse\ error</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
-		       \%W<b>Notice</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
-		       \%EParse\ error:\ %m\ in\ %f\ on\ line\ %l,
-		       \%WNotice:\ %m\ in\ %f</b>\ on\ line\ %l,
-		       \%-G%.%#
+CompilerSet errorformat=%E<b>%.%#Parse\ error</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
+		    \%W<b>%.%#Notice</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
+		    \%E%.%#Parse\ error:\ %m\ in\ %f\ on\ line\ %l,
+		    \%W%.%#Notice:\ %m\ in\ %f\ on\ line\ %l,
+		    \%-G%.%#
 
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/compiler/rake.vim

@@ -0,0 +1,35 @@
+" Vim compiler file
+" Language:		Rake
+" Maintainer:		Tim Pope <vimNOSPAM@tpope.org>
+" URL:			https://github.com/vim-ruby/vim-ruby
+" Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "rake"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo-=C
+
+CompilerSet makeprg=rake
+
+CompilerSet errorformat=
+      \%D(in\ %f),
+      \%\\s%#from\ %f:%l:%m,
+      \%\\s%#from\ %f:%l:,
+      \%\\s%##\ %f:%l:%m,
+      \%\\s%##\ %f:%l,
+      \%\\s%#[%f:%l:\ %#%m,
+      \%\\s%#%f:%l:\ %#%m,
+      \%\\s%#%f:%l:,
+      \%m\ [%f:%l]:
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim: nowrap sw=2 sts=2 ts=8:

runtime/compiler/rspec.vim

@@ -1,9 +1,7 @@
 " Vim compiler file
 " Language:		RSpec
 " Maintainer:		Tim Pope <vimNOSPAM@tpope.org>
-" Last Change:		2009 Dec 22
-" URL:			http://vim-ruby.rubyforge.org
-" Anon CVS:		See above site
+" URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
 
 if exists("current_compiler")
@@ -18,21 +16,15 @@ endif
 let s:cpo_save = &cpo
 set cpo-=C
 
-CompilerSet makeprg=spec
+CompilerSet makeprg=rspec
 
 CompilerSet errorformat=
-    \%+W'%.%#'\ FAILED,
-    \%+I'%.%#'\ FIXED,
-    \%-Cexpected:%.%#,
-    \%-C\ \ \ \ \ got:%.%#,
+    \%f:%l:\ %tarning:\ %m,
     \%E%.%#:in\ `load':\ %f:%l:%m,
-    \%C%f:%l:,
-    \%W%f:%l:\ warning:\ %m,
-    \%E%f:%l:in\ %*[^:]:\ %m,
-    \%E%f:%l:\ %m,
-    \%-Z%\tfrom\ %f:%l,
-    \%-Z%p^%.%#,
-    \%-C%.%#,
+    \%E%f:%l:in\ `%*[^']':\ %m,
+    \%-Z\ \ \ \ \ \#\ %f:%l:%.%#,
+    \%E\ \ %\\d%\\+)%.%#,
+    \%C\ \ \ \ \ %m,
     \%-G%.%#
 
 let &cpo = s:cpo_save

runtime/compiler/ruby.vim

@@ -1,33 +1,10 @@
 " Vim compiler file
 " Language:		Ruby
 " Function:		Syntax check and/or error reporting
-" Maintainer:		Tim Hammerquist <timh at rubyforge.org>
-" Last Change:		2008 Aug 1
-" URL:			http://vim-ruby.rubyforge.org
-" Anon CVS:		See above site
+" Maintainer:		Tim Pope <vimNOSPAM@tpope.org>
+" URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
 " ----------------------------------------------------------------------------
-"
-" Changelog:
-" 0.2:	script saves and restores 'cpoptions' value to prevent problems with
-"	line continuations
-" 0.1:	initial release
-"
-" Contributors:
-"   Hugh Sasse <hgs@dmu.ac.uk>
-"   Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-"
-" Todo:
-"   match error type %m
-"
-" Comments:
-"   I know this file isn't perfect.  If you have any questions, suggestions,
-"   patches, etc., please don't hesitate to let me know.
-"
-"   This is my first experience with 'errorformat' and compiler plugins and
-"   I welcome any input from more experienced (or clearer-thinking)
-"   individuals.
-" ----------------------------------------------------------------------------
 
 if exists("current_compiler")
   finish

runtime/compiler/rubyunit.vim

@@ -1,9 +1,7 @@
 " Vim compiler file
 " Language:		Test::Unit - Ruby Unit Testing Framework
 " Maintainer:		Doug Kearns <dougkearns@gmail.com>
-" Last Change:		2008 Aug 1
-" URL:			http://vim-ruby.rubyforge.org
-" Anon CVS:		See above site
+" URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
 
 if exists("current_compiler")

runtime/compiler/sass.vim

@@ -0,0 +1,30 @@
+" Vim compiler file
+" Compiler:	Sass
+" Maintainer:	Tim Pope <vimNOSPAM@tpope.org>
+" Last Change:	2013 May 30
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "sass"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo-=C
+
+CompilerSet makeprg=sass\ -c
+
+CompilerSet errorformat=
+      \%f:%l:%m\ (Sass::Syntax%trror),
+      \%ESyntax\ %trror:%m,
+      \%C%\\s%\\+on\ line\ %l\ of\ %f,
+      \%Z%.%#,
+      \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim:set sw=2 sts=2:

runtime/compiler/se.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
-" Compiler:	se (SmartEiffel Compiler)
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/se.vim
-" Last Change:	2004 Nov 27
+" Compiler:	se (Liberty Eiffel Compiler)
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jun 29
 
 if exists("current_compiler")
   finish
@@ -16,12 +15,15 @@ endif
 let s:cpo_save = &cpo
 set cpo-=C
 
-CompilerSet makeprg=compile\ %
+CompilerSet makeprg=se\ c
 
 CompilerSet errorformat=%W******\ Warning:\ %m,
 		    \%E******\ Fatal\ Error:\ %m,
 		    \%E******\ Error:\ %m,
-		    \%CLine\ %l\ column\ %c\ in\ %\\w%\\+\ (%f)\ :,
+		    \%ZLine\ %l\ column\ %c\ in\ %.%#\ (%f)\ %\\=:,
+		    \%ZLine\ %l\ columns\ %c\\,\ %\\d%\\+\ %.%#\ (%f)\ %\\=:,
+		    \%+C%*[^\ ]%.%#,
+		    \%-GThe\ source\ lines\ involved,
 		    \%-G%.%#
 
 let &cpo = s:cpo_save

runtime/compiler/tcl.vim

@@ -1,7 +1,6 @@
 " Vim compiler file
 " Compiler:	tcl
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/tcl.vim
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
 " Last Change:	2004 Nov 27
 
 if exists("current_compiler")

runtime/compiler/tidy.vim

@@ -1,11 +1,7 @@
 " Vim compiler file
 " Compiler:	HTML Tidy
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/tidy.vim
-" Last Change:	2004 Nov 27
-
-" NOTE: set 'tidy_compiler_040800' if you are using the 4th August 2000 release
-"       of HTML Tidy.
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jul 7
 
 if exists("current_compiler")
   finish
@@ -16,13 +12,7 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
   command -nargs=* CompilerSet setlocal <args>
 endif
 
-" this is needed to work around a bug in the 04/08/00 release of tidy which
-" failed to set the filename if the -quiet option was used
-if exists("tidy_compiler_040800")
-  CompilerSet makeprg=tidy\ -errors\ --gnu-emacs\ yes\ %
-else
-  CompilerSet makeprg=tidy\ -quiet\ -errors\ --gnu-emacs\ yes\ %
-endif
+CompilerSet makeprg=tidy\ -quiet\ -errors\ --gnu-emacs\ yes\ %
 
 " sample warning: foo.html:8:1: Warning: inserting missing 'foobar' element
 " sample error:   foo.html:9:2: Error: <foobar> is not recognized!

runtime/compiler/xmllint.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
 " Compiler:	xmllint
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/xmllint.vim
-" Last Change:	2004 Nov 27
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jul 8
 
 if exists("current_compiler")
   finish
@@ -16,12 +15,10 @@ endif
 let s:cpo_save = &cpo
 set cpo-=C
 
-CompilerSet makeprg=xmllint\ --valid\ --noout\ 
+CompilerSet makeprg=xmllint\ --valid\ --noout
 
-CompilerSet errorformat=%E%f:%l:\ error:\ %m,
-		    \%W%f:%l:\ warning:\ %m,
-		    \%E%f:%l:\ validity\ error:\ %m,
-		    \%W%f:%l:\ validity\ warning:\ %m,
+CompilerSet errorformat=%+E%f:%l:\ %.%#\ error\ :\ %m,
+		    \%+W%f:%l:\ %.%#\ warning\ :\ %m,
 		    \%-Z%p^,
 		    \%-G%.%#
 

runtime/doc/Makefile

@@ -229,7 +229,6 @@ HTMLS = \
 	starting.html \
 	syntax.html \
 	tabpage.html \
-	tags.html \
 	tagsrch.html \
 	term.html \
 	tips.html \

runtime/doc/arabic.txt

@@ -1,4 +1,4 @@
-*arabic.txt*	For Vim version 7.3.  Last change: 2010 Nov 13
+*arabic.txt*	For Vim version 7.4.  Last change: 2010 Nov 13
 
 
 		  VIM REFERENCE MANUAL	  by Nadim Shaikli

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 7.3.  Last change: 2013 May 19
+*autocmd.txt*   For Vim version 7.4.  Last change: 2014 Sep 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -278,6 +278,7 @@ Name			triggered by ~
 |ShellCmdPost|		after executing a shell command
 |ShellFilterPost|	after filtering with a shell command
 
+|CmdUndefined|		a user command is used but it isn't defined
 |FuncUndefined|		a user function is used but it isn't defined
 |SpellFileMissing|	a spell file is used but it can't be found
 |SourcePre|		before sourcing a Vim script
@@ -304,6 +305,9 @@ Name			triggered by ~
 |InsertCharPre|		when a character was typed in Insert mode, before
 			inserting it
 
+|TextChanged|		after a change was made to the text in Normal mode
+|TextChangedI|		after a change was made to the text in Insert mode
+
 |ColorScheme|		after loading a color scheme
 
 |RemoteReply|		a reply from a server Vim was received
@@ -462,6 +466,16 @@ BufWriteCmd			Before writing the whole buffer to a file.
 							*BufWritePost*
 BufWritePost			After writing the whole buffer to a file
 				(should undo the commands for BufWritePre).
+							*CmdUndefined*
+CmdUndefined			When a user command is used but it isn't
+				defined.  Useful for defining a command only
+				when it's used.  The pattern is matched
+				against the command name.  Both <amatch> and
+				<afile> are set to the name of the command.
+				NOTE: Autocompletion won't work until the
+				command is defined.  An alternative is to
+				always define the user command and have it
+				invoke an autoloaded function.  See |autoload|.
 							*CmdwinEnter*
 CmdwinEnter			After entering the command-line window.
 				Useful for setting options specifically for
@@ -480,6 +494,12 @@ CmdwinLeave			Before leaving the command-line window.
 				|cmdwin-char|
 							*ColorScheme*
 ColorScheme			After loading a color scheme. |:colorscheme|
+				The pattern is matched against the
+				colorscheme name. <afile> can be used for the
+				name of the actual file where this option was
+				set, and <amatch> for the new colorscheme
+				name.
+
 
 							*CompleteDone*
 CompleteDone			After Insert mode completion is done.  Either
@@ -499,6 +519,11 @@ CursorHold			When the user doesn't press a key for the time
 				operator.
 				While recording the CursorHold event is not
 				triggered. |q|
+							*<CursorHold>*
+				Internally the autocommand is triggered by the
+				<CursorHold> key. In an expression mapping
+				|getchar()| may see this character.
+
 				Note: Interactive commands cannot be used for
 				this event.  There is no hit-enter prompt,
 				the screen is updated directly (when needed).
@@ -513,9 +538,9 @@ CursorHold			When the user doesn't press a key for the time
 CursorHoldI			Just like CursorHold, but in Insert mode.
 
 							*CursorMoved*
-CursorMoved			After the cursor was moved in Normal mode.
-				Also when the text of the cursor line has been
-				changed, e.g., with "x", "rx" or "p".
+CursorMoved			After the cursor was moved in Normal or Visual
+				mode.  Also when the text of the cursor line
+				has been changed, e.g., with "x", "rx" or "p".
 				Not triggered when there is typeahead or when
 				an operator is pending.
 				For an example see |match-parens|.
@@ -553,11 +578,15 @@ FileChangedRO			Before making the first change to a read-only
 				It is not allowed to change to another buffer
 				here.  You can reload the buffer but not edit
 				another one.
+							*E881*
+				If the number of lines changes saving for undo
+				may fail and the change will be aborted.
 							*FileChangedShell*
 FileChangedShell		When Vim notices that the modification time of
 				a file has changed since editing started.
 				Also when the file attributes of the file
-				change. |timestamp|
+				change or when the size of the file changes.
+				|timestamp|
 				Mostly triggered after executing a shell
 				command, but also with a |:checktime| command
 				or when Gvim regains input focus.
@@ -657,6 +686,8 @@ FuncUndefined			When a user function is used but it isn't
 				when it's used.  The pattern is matched
 				against the function name.  Both <amatch> and
 				<afile> are set to the name of the function.
+				NOTE: When writing Vim scripts a better
+				alternative is to use an autoloaded function.
 				See |autoload-functions|.
 							*GUIEnter*
 GUIEnter			After starting the GUI successfully, and after
@@ -731,7 +762,7 @@ QuickFixCmdPost			Like QuickFixCmdPre, but after a quickfix
 				command is run, before jumping to the first
 				location. For |:cfile| and |:lfile| commands
 				it is run after error file is read and before
-				moving to the first error. 
+				moving to the first error.
 				See |QuickFixCmdPost-example|.
 							*QuitPre*
 QuitPre				When using `:quit`, `:wq` or `:qall`, before
@@ -952,7 +983,8 @@ the autocommand is executed.  This is different from the command!
 
 							*file-pattern*
 The pattern is interpreted like mostly used in file names:
-	*	matches any sequence of characters
+	*	matches any sequence of characters; Unusual: includes path
+		separators
 	?	matches any single character
 	\?	matches a '?'
 	.	matches a '.'
@@ -961,6 +993,9 @@ The pattern is interpreted like mostly used in file names:
 	\,	matches a ','
 	{ }	like \( \) in a |pattern|
 	,	inside { }: like \| in a |pattern|
+	\}	literal }
+	\{	literal {
+	\\\{n,m\}  like \{n,m} in a |pattern|
 	\	special meaning like in a |pattern|
 	[ch]	matches 'c' or 'h'
 	[^ch]   match any character but 'c' and 'h'

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 7.3.  Last change: 2013 Mar 19
+*change.txt*    For Vim version 7.4.  Last change: 2015 Feb 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -71,9 +71,21 @@ For inserting text see |insert.txt|.
 			"D" deletes the highlighted text plus all text until
 			the end of the line.  {not in Vi}
 
-					*:d* *:de* *:del* *:delete* *:dl*
+					*:d* *:de* *:del* *:delete* *:dl* *:dp*
 :[range]d[elete] [x]	Delete [range] lines (default: current line) [into
 			register x].
+			Note these weird abbreviations:
+			   :dl		delete and list
+			   :dell	idem
+			   :delel	idem
+			   :deletl	idem
+			   :deletel	idem
+			   :dp		delete and print
+			   :dep		idem
+			   :delp	idem
+			   :delep	idem
+			   :deletp	idem
+			   :deletep	idem
 
 :[range]d[elete] [x] {count}
 			Delete {count} lines, starting with [range]
@@ -144,6 +156,9 @@ only after a '.').
 The 'B' and 'M' flags in 'formatoptions' change the behavior for inserting
 spaces before and after a multi-byte character |fo-table|.
 
+The '[ mark is set at the end of the first line that was joined, '] at the end
+of the resulting line.
+
 
 ==============================================================================
 2. Delete and insert				*delete-insert* *replacing*
@@ -463,8 +478,8 @@ If the 'shiftround' option is on, the indent is rounded to a multiple of
 'shiftwidth'.
 
 If the 'smartindent' option is on, or 'cindent' is on and 'cinkeys' contains
-'#', shift right does not affect lines starting with '#' (these are supposed
-to be C preprocessor lines that must stay in column 1).
+'#' with a zero value, shift right does not affect lines starting with '#'
+(these are supposed to be C preprocessor lines that must stay in column 1).
 
 When the 'expandtab' option is off (this is the default) Vim uses <Tab>s as
 much as possible to make the indent.  You can use ">><<" to replace an indent
@@ -812,7 +827,7 @@ either the first or second pattern in parentheses did not match, so either
 <
 
 Substitute with an expression			*sub-replace-expression*
-						*sub-replace-\=*
+						*sub-replace-\=* *s/\=*
 When the substitute string starts with "\=" the remainder is interpreted as an
 expression.  This does not work recursively: a |substitute()| function inside
 the expression cannot use "\=" for the substitute string.
@@ -1057,6 +1072,11 @@ another register.  E.g., yank the text to copy, Visually select the text to
 replace and use "0p .  You can repeat this as many times as you like, the
 unnamed register will be changed each time.
 
+When you use a blockwise Visual mode command and yank only a single line into
+a register, a paste on a visual selected area will paste that single line on
+each of the selected lines (thus replacing the blockwise selected region by a
+block of the pasted line).
+
 							*blockwise-register*
 If you use a blockwise Visual mode command to get the text into the register,
 the block of text will be inserted before ("P") or after ("p") the cursor
@@ -1083,11 +1103,12 @@ There are nine types of registers:			*registers* *E354*
 2. 10 numbered registers "0 to "9
 3. The small delete register "-
 4. 26 named registers "a to "z or "A to "Z
-5. four read-only registers ":, "., "% and "#
-6. the expression register "=
-7. The selection and drop registers "*, "+ and "~ 
-8. The black hole register "_
-9. Last search pattern register "/
+5. three read-only registers ":, "., "%
+6. alternate buffer register "#
+7. the expression register "=
+8. The selection and drop registers "*, "+ and "~ 
+9. The black hole register "_
+10. Last search pattern register "/
 
 1. Unnamed register ""				*quote_quote* *quotequote*
 Vim fills this register with text deleted with the "d", "c", "s", "x" commands
@@ -1114,6 +1135,8 @@ less than one line (the small delete register is used then).  An exception is
 made for the delete operator with these movement commands: |%|, |(|, |)|, |`|,
 |/|, |?|, |n|, |N|, |{| and |}|.  Register "1 is always used then (this is Vi
 compatible).  The "- register is used as well if the delete is within a line.
+Note that these characters may be mapped.  E.g. |%| is mapped by the matchit
+plugin.
    With each successive deletion or change, Vim shifts the previous contents
 of register 1 into register 2, 2 into 3, and so forth, losing the previous
 contents of register 9.
@@ -1131,7 +1154,7 @@ letters to replace their previous contents or as uppercase letters to append
 to their previous contents.  When the '>' flag is present in 'cpoptions' then
 a line break is inserted before the appended text.
 
-5. Read-only registers ":, "., "% and "#
+5. Read-only registers ":, ". and "%
 These are '%', '#', ':' and '.'.  You can use them only with the "p", "P",
 and ":put" commands and with CTRL-R.  {not in Vi}
 						*quote_.* *quote.* *E29*
@@ -1142,8 +1165,6 @@ and ":put" commands and with CTRL-R.  {not in Vi}
 		('textwidth' and other options affect what is inserted).
 							*quote_%* *quote%*
 	"%	Contains the name of the current file.
-							*quote_#* *quote#*
-	"#	Contains the name of the alternate file.
 						*quote_:* *quote:* *E30*
 	":	Contains the most recent executed command-line.  Example: Use
 		"@:" to repeat the previous command-line command.
@@ -1152,16 +1173,33 @@ and ":put" commands and with CTRL-R.  {not in Vi}
 		the command was completely from a mapping.
 		{not available when compiled without the |+cmdline_hist|
 		feature}
+							*quote_#* *quote#*
+6. Alternate file register "#
+Contains the name of the alternate file for the current window.  It will
+change how the |CTRL-^| command works.
+This register is writable, mainly to allow for restoring it after a plugin has
+changed it.  It accepts buffer number: >
+    let altbuf = bufnr(@#)
+    ...
+    let @# = altbuf
+It will give error |E86| if you pass buffer number and this buffer does not
+exist.
+It can also accept a match with an existing buffer name: >
+    let @# = 'buffer_name'
+Error |E93| if there is more than one buffer matching the given name or |E94|
+if none of buffers matches the given name.
 
-6. Expression register "=			*quote_=* *quote=* *@=*
+7. Expression register "=			*quote_=* *quote=* *@=*
 This is not really a register that stores text, but is a way to use an
 expression in commands which use a register.  The expression register is
-read-only; you cannot put text into it.  After the '=', the cursor moves to
-the command-line, where you can enter any expression (see |expression|).  All
-normal command-line editing commands are available, including a special
-history for expressions.  When you end the command-line by typing <CR>, Vim
-computes the result of the expression.  If you end it with <Esc>, Vim abandons
-the expression.  If you do not enter an expression, Vim uses the previous
+read-write.
+
+When typing the '=' after " or CTRL-R the cursor moves to the command-line,
+where you can enter any expression (see |expression|).  All normal
+command-line editing commands are available, including a special history for
+expressions.  When you end the command-line by typing <CR>, Vim computes the
+result of the expression.  If you end it with <Esc>, Vim abandons the
+expression.  If you do not enter an expression, Vim uses the previous
 expression (like with the "/" command).
 
 The expression must evaluate to a String.  A Number is always automatically
@@ -1174,7 +1212,7 @@ If the "= register is used for the "p" command, the String is split up at <NL>
 characters.  If the String ends in a <NL>, it is regarded as a linewise
 register.  {not in Vi}
 
-7. Selection and drop registers "*, "+ and "~ 
+8. Selection and drop registers "*, "+ and "~ 
 Use these registers for storing and retrieving the selected text for the GUI.
 See |quotestar| and |quoteplus|.  When the clipboard is not available or not
 working, the unnamed register is used instead.  For Unix systems the clipboard
@@ -1196,17 +1234,17 @@ GTK GUI}
 Note: The "~ register is only used when dropping plain text onto Vim.
 Drag'n'drop of URI lists is handled internally.
 
-8. Black hole register "_				*quote_*
+9. Black hole register "_				*quote_*
 When writing to this register, nothing happens.  This can be used to delete
 text without affecting the normal registers.  When reading from this register,
 nothing is returned.  {not in Vi}
 
-9. Last search pattern register	"/			*quote_/* *quote/*
+10. Last search pattern register	"/			*quote_/* *quote/*
 Contains the most recent search-pattern.  This is used for "n" and 'hlsearch'.
 It is writable with `:let`, you can change it to have 'hlsearch' highlight
 other matches without actually searching.  You can't yank or delete into this
 register.  The search direction is available in |v:searchforward|.
-Note that the valued is restored when returning from a function
+Note that the value is restored when returning from a function
 |function-search-undo|.
 {not in Vi}
 
@@ -1421,10 +1459,10 @@ When you hit Return in a C-comment, Vim will insert the middle comment leader
 for the new line: " * ".  To close this comment you just have to type "/"
 before typing anything else on the new line.  This will replace the
 middle-comment leader with the end-comment leader and apply any specified
-alignment, leaving just " */".  There is no need to hit BackSpace first.
+alignment, leaving just " */".  There is no need to hit Backspace first.
 
-When there is a match with a middle part, but there also is a maching end part
-which is longer, the end part is used.  This makes a C style comment work
+When there is a match with a middle part, but there also is a matching end
+part which is longer, the end part is used.  This makes a C style comment work
 without requiring the middle part to end with a space.
 
 Here is an example of alignment flags at work to make a comment stand out
@@ -1628,7 +1666,7 @@ And a few warnings:
 7. Sorting text						*sorting*
 
 Vim has a sorting function and a sorting command.  The sorting function can be
-found here: |sort()|.
+found here: |sort()|, |uniq()|.
 
 							*:sor* *:sort*
 :[range]sor[t][!] [i][u][r][n][x][o] [/{pattern}/]
@@ -1695,8 +1733,8 @@ Note that using `:sort` with `:global` doesn't sort the matching lines, it's
 quite useless.
 
 The details about sorting depend on the library function used.  There is no
-guarantee that sorting is "stable" or obeys the current locale.  You will have
-to try it out.
+guarantee that sorting obeys the current locale.  You will have to try it out.
+Vim does do a "stable" sort.
 
 The sorting can be interrupted, but if you interrupt it too late in the
 process you may end up with duplicated lines.  This also depends on the system

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 7.3.  Last change: 2013 Mar 16
+*cmdline.txt*   For Vim version 7.4.  Last change: 2014 Sep 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -56,7 +56,7 @@ history tables:
 These are completely separate.  Each history can only be accessed when
 entering the same type of line.
 Use the 'history' option to set the number of lines that are remembered
-(default: 20).
+(default: 50).
 Notes:
 - When you enter a command-line that is exactly the same as an older one, the
   old one is removed (to avoid repeated commands moving older commands out of
@@ -356,6 +356,10 @@ terminals)
 		List the recent five entries from all histories: >
 			:history all -5,
 
+:keepp[atterns] {command}			*:keepp* *:keeppatterns*
+		Execute {command}, without adding anything to the search
+		history
+
 ==============================================================================
 2. Command-line completion				*cmdline-completion*
 
@@ -754,6 +758,7 @@ characters have a special meaning.  These can also be used in the expression
 function expand() |expand()|.
 	%	Is replaced with the current file name.		  *:_%* *c_%*
 	#	Is replaced with the alternate file name.	  *:_#* *c_#*
+		This is remembered for every window.
 	#n	(where n is a number) is replaced with		  *:_#0* *:_#n*
 		the file name of buffer n.  "#0" is the same as "#".     *c_#n*
 	##	Is replaced with all names in the argument list	  *:_##* *c_##*
@@ -819,8 +824,8 @@ Note: these are typed literally, they are not special keys!
 		   the start of the function.
 
 							 *filename-modifiers*
-	 *:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs*
-	        *%:8* *%:p* *%:.* *%:~* *%:h* *%:t* *%:r* *%:e* *%:s* *%:gs*
+*:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs* *::S*
+     *%:8* *%:p* *%:.* *%:~* *%:h* *%:t* *%:r* *%:e* *%:s* *%:gs* *%:S*
 The file name modifiers can be used after "%", "#", "#n", "<cfile>", "<sfile>",
 "<afile>" or "<abuf>".  They are also used with the |fnamemodify()| function.
 These are not available when Vim has been compiled without the |+modify_fname|
@@ -875,6 +880,10 @@ These modifiers can be given, in this order:
 	:gs?pat?sub?
 		Substitute all occurrences of "pat" with "sub".  Otherwise
 		this works like ":s".
+	:S	Escape special characters for use with a shell command (see 
+		|shellescape()|). Must be the last one. Examples: >
+		    :!dir <cfile>:S
+		    :call system('chmod +w -- ' . expand('%:S'))
 
 Examples, when the file name is "src/version.c", current dir
 "/home/mool/vim": >
@@ -1075,6 +1084,9 @@ another window, or drag statuslines of other windows.  You can drag the
 statusline of the command-line window itself and the statusline above it.
 Thus you can resize the command-line window, but not others.
 
+The |getcmdwintype()| function returns the type of the command-line being
+edited as described in |cmdwin-char|.
+
 
 AUTOCOMMANDS
 

runtime/doc/debug.txt

@@ -1,4 +1,4 @@
-*debug.txt*     For Vim version 7.3.  Last change: 2012 Feb 11
+*debug.txt*     For Vim version 7.4.  Last change: 2012 Feb 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/debugger.txt

@@ -1,4 +1,4 @@
-*debugger.txt*  For Vim version 7.3.  Last change: 2005 Mar 29
+*debugger.txt*  For Vim version 7.4.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur

runtime/doc/develop.txt

@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 7.3.  Last change: 2013 Apr 27
+*develop.txt*   For Vim version 7.4.  Last change: 2014 Mar 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -19,7 +19,6 @@ code.
 
 Vim is open source software.  Everybody is encouraged to contribute to help
 improving Vim.  For sending patches a context diff "diff -c" is preferred.
-Also see http://www.vim.org/tips/tip.php?tip_id=618.
 Also see http://vim.wikia.com/wiki/How_to_make_and_submit_a_patch.
 
 ==============================================================================

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 7.3.  Last change: 2012 Sep 05
+*diff.txt*      For Vim version 7.4.  Last change: 2015 Feb 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -95,7 +95,7 @@ While already in Vim you can start diff mode in three ways.
 :difft[his]	Make the current window part of the diff windows.  This sets
 		the options like for "vimdiff".
 
-:diffp[atch] {patchfile}				 *E816* *:diffp* *:diffpatch*
+:diffp[atch] {patchfile}			 *E816* *:diffp* *:diffpatch*
 		Use the current buffer, patch it with the diff found in
 		{patchfile} and open a buffer on the result.  The options are
 		set as for "vimdiff".
@@ -123,14 +123,18 @@ Since the option values are remembered with the buffer, you can edit another
 file for a moment and come back to the same file and be in diff mode again.
 
 							*:diffo* *:diffoff*
-:diffo[ff]	Switch off diff mode for the current window.
+:diffo[ff]	Switch off diff mode for the current window.  Resets related
+		options also when 'diff' was not set.
 
 :diffo[ff]!	Switch off diff mode for the current window and in all windows
-		in the current tab page where 'diff' is set.
+		in the current tab page where 'diff' is set.  Resetting
+		related options only happens in a window that has 'diff' set,
+		if the current window does not have 'diff' set then no options
+		in it are changed.
 
-The ":diffoff" command resets the relevant options to their default value.
-This may be different from what the values were before diff mode was started,
-the old values are not remembered.
+The ":diffoff" command resets the relevant options to the values they had when
+using |:diffsplit|, |:diffpatch| , |:diffthis|. or starting Vim in diff mode.
+Otherwise they are set to their default value:
 
 	'diff'		off
 	'scrollbind'	off
@@ -262,13 +266,17 @@ that the buffers will be equal within the specified range.
 		See below for [range].
 
 							*do*
-do		Same as ":diffget" without argument or range.  The "o" stands
-		for "obtain" ("dg" can't be used, it could be the start of
-		"dgg"!). Note: this doesn't work in Visual mode.
+[count]do	Same as ":diffget" without range.  The "o" stands for "obtain"
+		("dg" can't be used, it could be the start of "dgg"!). Note:
+		this doesn't work in Visual mode.
+		If you give a [count], it is used as the [bufspec] argument
+		for ":diffget".
 
 							*dp*
-dp		Same as ":diffput" without argument or range.
-		Note: this doesn't work in Visual mode.
+[count]dp	Same as ":diffput" without range.  Note: this doesn't work in
+		Visual mode.
+		If you give a [count], it is used as the [bufspec] argument
+		for ":diffput".
 
 
 When no [range] is given, the diff at the cursor position or just above it is
@@ -306,6 +314,19 @@ name or a part of a buffer name.  Examples:
 
 Also see |'diffopt'| and the "diff" item of |'fillchars'|.
 
+					    *diff-slow* *diff_translations*
+For very long lines, the diff syntax highlighting might be slow, especially
+since it tries to match all different kind of localisations. To disable
+localisations and speed up the syntax highlighting, set the global variable
+g:diff_translations to zero: >
+
+    let g:diff_translations = 0
+<
+After setting this variable, Reload the syntax script: >
+
+    set syntax=diff
+<
+
 
 FINDING THE DIFFERENCES					*diff-diffexpr*
 

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 7.3.  Last change: 2011 Jan 15
+*digraph.txt*   For Vim version 7.4.  Last change: 2014 Jun 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -147,7 +147,7 @@ a standard meaning:
 	Two			2	Hook
 	Nine			9	Horn
 
-	Equals			=	Cyrillic
+	Equals			=	Cyrillic (= used as second char) 
 	Asterisk		*	Greek
 	Percent sign		%	Greek/Cyrillic special
 	Plus			+	smalls: Arabic, capitals: Hebrew
@@ -170,6 +170,11 @@ used for the currency sign, and latin9 (iso-8859-15), where the digraph =e is
 used for the euro sign, while both of them are the character 164, 0xa4.  For
 compatibility with zsh Eu can also be used for the euro sign.
 
+ROUBLE
+
+The rouble sign was added in 2014 as 0x20bd.  Vim supports the digraphs =R and
+=P for this.  Note that R= and P= are other characters.
+
 							*digraph-table*
 char  digraph	hex	dec	official name ~
 ^@	NU	0x00	  0	NULL (NUL)
@@ -966,6 +971,8 @@ char  digraph	hex	dec	official name ~
 ₧	Pt	20A7	8359	PESETA SIGN
 ₩	W=	20A9	8361	WON SIGN
 €	Eu	20AC	8364	EURO SIGN
+₽	=R	20BD	8381	ROUBLE SIGN
+₽	=P	20BD	8381	ROUBLE SIGN
 ℃	oC	2103	8451	DEGREE CELSIUS
 ℅	co	2105	8453	CARE OF
 ℉	oF	2109	8457	DEGREE FAHRENHEIT
@@ -1077,7 +1084,7 @@ char  digraph	hex	dec	official name ~
 ⊥	-T	22A5	8869	UP TACK
 ⋅	.P	22C5	8901	DOT OPERATOR
 ⋮	:3	22EE	8942	VERTICAL ELLIPSIS
-⋯       .3      22EF    8943    MIDLINE HORIZONTAL ELLIPSIS
+⋯	.3	22EF	8943	MIDLINE HORIZONTAL ELLIPSIS
 ⌂	Eh	2302	8962	HOUSE
 ⌈	<7	2308	8968	LEFT CEILING
 ⌉	>7	2309	8969	RIGHT CEILING

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 7.3.  Last change: 2013 Feb 07
+*editing.txt*   For Vim version 7.4.  Last change: 2015 Feb 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -38,6 +38,7 @@ If there already was a current file name, then that one becomes the alternate
 file name.  It can be used with "#" on the command line |:_#| and you can use
 the |CTRL-^| command to toggle between the current and the alternate file.
 However, the alternate file name is not changed when |:keepalt| is used.
+An alternate file name is remembered for each window.
 
 							*:keepalt* *:keepa*
 :keepalt {cmd}		Execute {cmd} while keeping the current alternate file
@@ -185,12 +186,13 @@ If you want to automatically save the changes without asking, switch on the
 that does not work for all commands.
 
 If you want to keep the changed buffer without saving it, switch on the
-'hidden' option.  See |hidden-buffer|.
+'hidden' option.  See |hidden-buffer|.  Some commands work like this even when
+'hidden' is not set, check the help for the command.
 
 ==============================================================================
 2. Editing a file					*edit-a-file*
 
-							*:e* *:edit*
+							*:e* *:edit* *reload*
 :e[dit] [++opt] [+cmd]	Edit the current file.  This is useful to re-edit the
 			current file, when it has been changed outside of Vim.
 			This fails when changes have been made to the current
@@ -199,7 +201,7 @@ If you want to keep the changed buffer without saving it, switch on the
 			Also see |++opt| and |+cmd|.
 			{Vi: no ++opt}
 
-							*:edit!*
+							*:edit!* *discard*
 :e[dit]! [++opt] [+cmd]
 			Edit the current file always.  Discard any changes to
 			the current buffer.  This is useful if you want to
@@ -302,7 +304,8 @@ CTRL-^			Edit the alternate file.  Mostly the alternate file is
 			Mnemonic: "goto file".
 			Uses the 'isfname' option to find out which characters
 			are supposed to be in a file name.  Trailing
-			punctuation characters ".,:;!" are ignored.
+			punctuation characters ".,:;!" are ignored. Escaped
+			spaces "\ " are reduced to a single space.
 			Uses the 'path' option as a list of directory names to
 			look for the file.  See the 'path' option for details
 			about relative directories and wildcards.
@@ -607,7 +610,10 @@ list of the current window.
 			{not in Vi}
 
 :[count]arga[dd] {name} ..			*:arga* *:argadd* *E479*
-			Add the {name}s to the argument list.
+:[count]arga[dd]
+			Add the {name}s to the argument list.  When {name} is
+			omitted add the current buffer name to the argument
+			list.
 			If [count] is omitted, the {name}s are added just
 			after the current entry in the argument list.
 			Otherwise they are added after the [count]'th file.
@@ -617,7 +623,8 @@ list of the current window.
 				:argadd x	a b x c
 				:0argadd x	x a b c
 				:1argadd x	a x b c
-				:99argadd x	a b c x
+				:$argadd x	a b c x
+				:+2argadd y	a b c x y
 			There is no check for duplicates, it is possible to
 			add a file to the argument list twice.
 			The currently edited file is not changed.
@@ -639,11 +646,19 @@ list of the current window.
 <			{not in Vi} {not available when compiled without the
 			|+listcmds| feature}
 
-:{range}argd[elete]	Delete the {range} files from the argument list.
+:[range]argd[elete]	Delete the {range} files from the argument list.
+			Example: >
+				:10,$argdel
+<			Deletes arguments 10 and further, keeping 1-9. >
+				:$argd
+<			Deletes just the last one. >
+				:argd
+				:.argd
+<			Deletes the current argument. >
+				:%argd
+<			Removes all the files from the arglist.
 			When the last number in the range is too high, up to
-			the last argument is deleted.  Example: >
-				:10,1000argdel
-<			Deletes arguments 10 and further, keeping 1-9.
+			the last argument is deleted.
 			{not in Vi} {not available when compiled without the
 			|+listcmds| feature}
 
@@ -818,8 +833,9 @@ current window.  The two windows then share this list, until one of them uses
 USING THE ARGUMENT LIST
 
 						*:argdo*
-:argdo[!] {cmd}		Execute {cmd} for each file in the argument list.
-			It works like doing this: >
+:[range]argdo[!] {cmd}	Execute {cmd} for each file in the argument list or
+			if [range] is specified only for arguments in that
+			range.  It works like doing this: >
 				:rewind
 				:{cmd}
 				:next
@@ -1075,9 +1091,12 @@ The names can be in upper- or lowercase.
 			the last file in the argument list has not been
 			edited.  See |:confirm| and 'confirm'.  {not in Vi}
 
-:q[uit]!		Quit without writing, also when visible buffers have
-			changes.  Does not exit when there are changed hidden
-			buffers.  Use ":qall!" to exit always.
+:q[uit]!		Quit without writing, also when currently visible
+			buffers have changes.  Does not exit when this is the
+			last window and there is a changed hidden buffer.
+			In this case, the first changed hidden buffer becomes
+			the current buffer.
+			Use ":qall!" to exit always.
 
 :cq[uit]		Quit always, without writing, and return an error
 			code.  See |:cq|.  Used for Manx's QuickFix mode (see
@@ -1360,11 +1379,21 @@ cannot be read without the right key.
 {only available when compiled with the |+cryptv| feature}  *E833*
 
 The text in the swap file and the undo file is also encrypted.  *E843*
+However, this is done block-by-block and may reduce the time needed to crack a
+password.  You can disable the swap file, but then a crash will cause you to
+lose your work.  The undo file can be disabled without much disadvantage. >
+	:set noundofile
+	:noswapfile edit secrets
 
 Note: The text in memory is not encrypted.  A system administrator may be able
 to see your text while you are editing it.  When filtering text with
-":!filter" or using ":w !command" the text is not encrypted, this may reveal
-it to others.  The 'viminfo' file is not encrypted.
+":!filter" or using ":w !command" the text is also not encrypted, this may
+reveal it to others.  The 'viminfo' file is not encrypted.
+
+You could do this to edit very secret text: >
+	:set noundofile viminfo=
+	:noswapfile edit secrets.txt
+Keep in mind that without a swap file you risk losing your work in a crash.
 
 WARNING: If you make a typo when entering the key and then write the file and
 exit, the text will be lost!
@@ -1391,18 +1420,23 @@ To disable the encryption, reset the 'key' option to an empty value: >
 	:set key=
 
 You can use the 'cryptmethod' option to select the type of encryption, use one
-of these two: >
-	:setlocal cm=zip       " weak method, backwards compatible
-	:setlocal cm=blowfish  " strong method
+of these: >
+	:setlocal cm=zip        " weak method, backwards compatible
+	:setlocal cm=blowfish   " method with flaws
+	:setlocal cm=blowfish2  " medium strong method
+
 Do this before writing the file.  When reading an encrypted file it will be
 set automatically to the method used when that file was written.  You can
 change 'cryptmethod' before writing that file to change the method.
-To set the default method, used for new files, use one of these in your
-|vimrc| file: >
-	set cm=zip
-	set cm=blowfish
+
+To set the default method, used for new files, use this in your |vimrc| 
+file: >
+	set cm=blowfish2
+Using "blowfish2" is highly recommended.  Only use another method if you
+must use an older Vim version that does not support it.
+
 The message given for reading and writing a file will show "[crypted]" when
-using zip, "[blowfish]" when using blowfish.
+using zip, "[blowfish]" when using blowfish, etc.
 
 When writing an undo file, the same key and method will be used for the text
 in the undo file. |persistent-undo|.
@@ -1437,7 +1471,7 @@ lines to "/etc/magic", "/usr/share/misc/magic" or wherever your system has the
      0	string	VimCrypt~	Vim encrypted file
      >9	string	01	- "zip" cryptmethod
      >9	string	02	- "blowfish" cryptmethod
-
+     >9	string	03	- "blowfish2" cryptmethod
 
 Notes:
 - Encryption is not possible when doing conversion with 'charconvert'.
@@ -1461,20 +1495,25 @@ Notes:
 - Pkzip uses the same encryption as 'cryptmethod' "zip", and US Govt has no
   objection to its export.  Pkzip's public file APPNOTE.TXT describes this
   algorithm in detail.
+- The implementation of 'cryptmethod' "blowfish" has a flaw.  It is possible
+  to crack the first 64 bytes of a file and in some circumstances more of the
+  file. Use of it is not recommended, but it's still the strongest method
+  supported by Vim 7.3 and 7.4.  The "zip" method is even weaker.
 - Vim originates from the Netherlands.  That is where the sources come from.
   Thus the encryption code is not exported from the USA.
 
 ==============================================================================
 10. Timestamps					*timestamp* *timestamps*
 
-Vim remembers the modification timestamp of a file when you begin editing it.
-This is used to avoid that you have two different versions of the same file
-(without you knowing this).
+Vim remembers the modification timestamp, mode and size of a file when you
+begin editing it.  This is used to avoid that you have two different versions
+of the same file (without you knowing this).
 
-After a shell command is run (|:!cmd| |suspend| |:read!| |K|) timestamps are
-compared for all buffers in a window.   Vim will run any associated
-|FileChangedShell| autocommands or display a warning for any files that have
-changed.  In the GUI this happens when Vim regains input focus.
+After a shell command is run (|:!cmd| |suspend| |:read!| |K|) timestamps,
+file modes and file sizes are compared for all buffers in a window.   Vim will
+run any associated |FileChangedShell| autocommands or display a warning for
+any files that have changed.  In the GUI this happens when Vim regains input
+focus.
 
 							*E321* *E462*
 If you want to automatically reload a file when it has been changed outside of

runtime/doc/evim-fr.1

@@ -1,4 +1,4 @@
-.TH EVIM 1 "16 f<>vrier 2002 February 16"
+.TH EVIM 1 "16 f<>vrier 2002"
 .SH NAME
 evim \- <20> Easy Vim <20>, <20>dite un fichier avec Vim sans utiliser les modes
 .SH SYNOPSIS
@@ -54,4 +54,4 @@ Voir le menu Aide/Remerciements ou ":help credits" dans
 .SH TRADUCTION
 Cette page de manuel a <20>t<EFBFBD> traduite David Blanchet.
 <david.blanchet@free.fr> 2005-03-26.
-Mise <20> jour 2012-05-06, Dominique Pell<6C> <dominique.pelle@gmail.com>
+Mise <20> jour 2013-05-10, Dominique Pell<6C> <dominique.pelle@gmail.com>

runtime/doc/evim-fr.UTF-8.1

@@ -1,4 +1,4 @@
-.TH EVIM 1 "16 février 2002 February 16"
+.TH EVIM 1 "16 février 2002"
 .SH NAME
 evim \- « Easy Vim », édite un fichier avec Vim sans utiliser les modes
 .SH SYNOPSIS
@@ -54,4 +54,4 @@ Voir le menu Aide/Remerciements ou ":help credits" dans
 .SH TRADUCTION
 Cette page de manuel a été traduite David Blanchet.
 <david.blanchet@free.fr> 2005-03-26.
-Mise à jour 2012-05-06, Dominique Pellé <dominique.pelle@gmail.com>
+Mise à jour 2013-05-10, Dominique Pellé <dominique.pelle@gmail.com>

runtime/doc/evim-ja.UTF-8.1

@@ -0,0 +1,51 @@
+.TH EVIM 1 "2002 February 16"
+.SH 名前
+evim \- easy Vim, モードレスエディタ Vim
+.SH 書式
+.br
+.B evim
+[options] [file ..]
+.br
+.B eview
+.SH 説明
+.B eVim
+は
+.B Vim
+を起動して、モードレスエディタとして動作するためのオプションを設定します。
+Vim の動作が point-and-click エディタのような動作になります。
+MS-Windows のメモ帳のような動作です。
+.B eVim
+は常に GUI で起動し、メニューとツールバーを表示します。
+.PP
+どうしても Vim の操作に馴染めない場合に使ってください。
+編集効率は下がります。
+.PP
+.B eview
+は同様に、読み込み専用モードで起動します。evim \-R と同じです。
+.PP
+引数や Vim についての詳細は vim(1) を参照してください。
+.PP
+オプション 'insertmode' が設定され、テキストを直接、入力できるようになりま
+す。
+.br
+コピーとペーストのキー操作が MS-Windows と同じになるように、マップが設定され
+ます。
+CTRL-X が切り取り、CTRL-C がコピー、CTRL-V がペーストです。
+標準の CTRL-V の操作は CTRL-Q に割り当てられます。
+.SH オプション
+vim(1) を参照してください。
+.SH ファイル
+.TP 15
+/usr/local/lib/vim/evim.vim
+eVim の初期化スクリプト。
+.SH 別名
+evim は "gumbies のための Vim" とも呼ばれています。
+evim を使っているあなたはきっと、頭にハンカチをかぶっているのです。
+(訳注: gumbies は Monty Python に登場するおもしろ集団。ハンカチをかぶっ
+ている。)
+.SH 関連項目
+vim(1)
+.SH 著者
+.B Vim
+のほとんどの機能は Bram Moolenaar が開発し、多くの人が協力しました。
+メニューの Help/Credits を参照してください。

runtime/doc/farsi.txt

@@ -1,4 +1,4 @@
-*farsi.txt*     For Vim version 7.3.  Last change: 2010 Aug 07
+*farsi.txt*     For Vim version 7.4.  Last change: 2010 Aug 07
 
 
 		  VIM REFERENCE MANUAL    by Mortaza Ghassab Shiran
@@ -222,7 +222,7 @@ o  Keyboard
 Note:
 	<09>  stands for Farsi PSP (break without space)
 
-	<09>  stands for Farsi PCN (for HAMZE attribute )
+	<09>  stands for Farsi PCN (for HAMZE attribute)
 
 Restrictions
 ------------

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 7.3.  Last change: 2011 Jun 19
+*filetype.txt*  For Vim version 7.4.  Last change: 2013 Dec 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -447,23 +447,25 @@ g:changelog_new_date_format
 				%%	insert a single '%' character
 				%d	insert the date from above
 				%u	insert the user from above
+                                %p	insert result of b:changelog_entry_prefix
 				%c	where to position cursor when done
-			The default is "%d  %u\n\n\t* %c\n\n", which produces
+			The default is "%d  %u\n\n\t* %p%c\n\n", which produces
 			something like (| is where cursor will be, unless at
 			the start of the line where it denotes the beginning
 			of the line) >
 				|2003-01-14  Full Name  <user@host>
 				|
-				|        * |
+				|        * prefix|
 <
 g:changelog_new_entry_format
 			The format used when creating a new entry.
 			The following table describes special tokens in the
 			string:
+                                %p	insert result of b:changelog_entry_prefix
 				%c	where to position cursor when done
 			The default is "\t*%c", which produces something
 			similar to >
-				|        * |
+				|        * prefix|
 <
 g:changelog_date_entry_search
 			The search pattern to use when searching for a
@@ -603,7 +605,7 @@ Since the text for this plugin is rather long it has been put in a separate
 file: |ft_sql.txt|.
 
 
-TEX							*ft-tex-plugin*
+TEX						*ft-tex-plugin* *g:tex_flavor*
 
 If the first line of a *.tex file has the form >
 	%&<format>

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 7.3.  Last change: 2010 May 13
+*fold.txt*      For Vim version 7.4.  Last change: 2013 Dec 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -285,9 +285,10 @@ zF		Create a fold for [count] lines.  Works like "zf".
 							*zd* *E351*
 zd		Delete one fold at the cursor.  When the cursor is on a folded
 		line, that fold is deleted.  Nested folds are moved one level
-		up.  In Visual mode all folds (partially) in the selected area
-		are deleted.  Careful: This easily deletes more folds than you
-		expect and there is no undo.
+		up.  In Visual mode one level of all folds (partially) in the
+		selected area are deleted.
+		Careful: This easily deletes more folds than you expect and
+		there is no undo for manual folding.
 		This only works when 'foldmethod' is "manual" or "marker".
 		Also see |fold-delete-marker|.
 

runtime/doc/ft_ada.txt

@@ -1,4 +1,4 @@
-*ft_ada.txt*	For Vim version 7.3.  Last change: 2010 Jul 20
+*ft_ada.txt*	For Vim version 7.4.  Last change: 2010 Jul 20
 
 
 		    ADA FILE TYPE PLUG-INS REFERENCE MANUAL~

runtime/doc/ft_sql.txt

@@ -1,4 +1,4 @@
-*ft_sql.txt*	For Vim version 7.3.  Last change: 2013 May 15
+*ft_sql.txt*	For Vim version 7.4.  Last change: 2013 May 15
 
 by David Fishburn
 

runtime/doc/gui.txt

@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 7.3.  Last change: 2011 Jul 22
+*gui.txt*       For Vim version 7.4.  Last change: 2014 Mar 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -93,10 +93,16 @@ and initialize other things that you may want to set up differently from the
 terminal version.
 
 Recommended place for your personal GUI initializations:
-	Unix		    $HOME/.gvimrc
-	OS/2		    $HOME/.gvimrc or $VIM/.gvimrc
-	MS-DOS and Win32    $HOME/_gvimrc or $VIM/_gvimrc
-	Amiga		    s:.gvimrc or $VIM/.gvimrc
+	Unix		    $HOME/.gvimrc or $HOME/.vim/gvimrc
+	OS/2		    $HOME/.gvimrc, $HOME/vimfiles/gvimrc
+			    or $VIM/.gvimrc
+	MS-DOS and Win32    $HOME/_gvimrc, $HOME/vimfiles/gvimrc
+			    or $VIM/_gvimrc
+	Amiga		    s:.gvimrc, home:.gvimrc, home:vimfiles:gvimrc
+			    or $VIM/.gvimrc
+
+The personal initialization files are searched in the order specified above
+and only the first one that is found is read.
 
 There are a number of options which only have meaning in the GUI version of
 Vim.  These are 'guicursor', 'guifont', 'guipty' and 'guioptions'.  They are
@@ -127,6 +133,7 @@ task bar with the 'guiheadroom' option.
 :winp[os]
 		Display current position of the top left corner of the GUI vim
 		window in pixels.  Does not work in all versions.
+		Also see |getwinposx()| and |getwinposy()|.
 
 :winp[os] {X} {Y}							*E466*
 		Put the GUI vim window at the given {X} and {Y} coordinates.
@@ -145,8 +152,11 @@ task bar with the 'guiheadroom' option.
 		option.
 
 If you are running the X Window System, you can get information about the
-window Vim is running in with this command: >
+window Vim is running in with these commands: >
 	:!xwininfo -id $WINDOWID
+	:!xprop -id $WINDOWID
+	:execute '!xwininfo -id ' . v:windowid
+	:execute '!xprop -id ' . v:windowid
 <
 							*gui-IME* *iBus*
 Input methods for international characters in X that rely on the XIM

runtime/doc/gui_w16.txt

@@ -1,4 +1,4 @@
-*gui_w16.txt*   For Vim version 7.3.  Last change: 2005 Mar 29
+*gui_w16.txt*   For Vim version 7.4.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 7.3.  Last change: 2012 Aug 04
+*gui_w32.txt*   For Vim version 7.4.  Last change: 2014 Dec 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -452,9 +452,10 @@ detailed elsewhere: see |'mouse'|, |win32-hidden-menus|.
 You can drag and drop one or more files into the Vim window, where they will
 be opened as normal.  See |drag-n-drop|.
 
-							*:simalt* *:si*
+							*:simalt* *:sim*
 :sim[alt] {key}		simulate pressing {key} while holding Alt pressed.
 			{not in Vi} {only for Win32 versions}
+			Note: ":si" means ":s" with the "i" flag.
 
 Normally, Vim takes control of all Alt-<Key> combinations, to increase the
 number of possible mappings.  This clashes with the standard use of Alt as the

runtime/doc/gui_x11.txt

@@ -1,4 +1,4 @@
-*gui_x11.txt*   For Vim version 7.3.  Last change: 2011 Sep 14
+*gui_x11.txt*   For Vim version 7.4.  Last change: 2014 Mar 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -442,7 +442,7 @@ command line argument).
 							*gui-x11-kde*
 There is no KDE version of Vim.  There has been some work on a port using the
 Qt toolkit, but it never worked properly and it has been abandoned.  Work
-continues on Yzis: www.yzis.org.
+continues on Yzis: https://github.com/chrizel/Yzis.
 
 ==============================================================================
 8. Compiling						*gui-x11-compiling*

runtime/doc/hangulin.txt

@@ -1,4 +1,4 @@
-*hangulin.txt*  For Vim version 7.3.  Last change: 2009 Jun 24
+*hangulin.txt*  For Vim version 7.4.  Last change: 2009 Jun 24
 
 
 		  VIM REFERENCE MANUAL    by Chi-Deok Hwang and Sung-Hyun Nam

runtime/doc/hebrew.txt

@@ -1,4 +1,4 @@
-*hebrew.txt*    For Vim version 7.3.  Last change: 2007 Jun 14
+*hebrew.txt*    For Vim version 7.4.  Last change: 2007 Jun 14
 
 
 	   VIM REFERENCE MANUAL    by Ron Aaron (and Avner Lottem)

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 7.3.  Last change: 2012 Dec 06
+*help.txt*	For Vim version 7.4.  Last change: 2012 Dec 06
 
 			VIM - main help file
 									 k

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 7.3.  Last change: 2012 Nov 28
+*helphelp.txt*	For Vim version 7.4.  Last change: 2014 Sep 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -96,6 +96,9 @@ Help on help files					*helphelp*
 			find a tag in a file with the same language as the
 			current file.  See |help-translated|.
 
+						 	*:helpc* *:helpclose*
+:helpc[lose]            Close one help window, if there is one.
+
 							*:helpg* *:helpgrep*
 :helpg[rep] {pattern}[@xx]
 			Search all help text files and make a list of lines

runtime/doc/howto.txt

@@ -1,4 +1,4 @@
-*howto.txt*	For Vim version 7.3.  Last change: 2006 Apr 02
+*howto.txt*	For Vim version 7.4.  Last change: 2006 Apr 02
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar

runtime/doc/if_cscop.txt

@@ -1,4 +1,4 @@
-*if_cscop.txt*  For Vim version 7.3.  Last change: 2011 Jun 12
+*if_cscop.txt*  For Vim version 7.4.  Last change: 2011 Jun 12
 
 
 		  VIM REFERENCE MANUAL    by Andy Kahn

runtime/doc/if_lua.txt

@@ -1,4 +1,4 @@
-*if_lua.txt*    For Vim version 7.3.  Last change: 2012 Jun 29
+*if_lua.txt*    For Vim version 7.4.  Last change: 2013 Sep 04
 
 
 		  VIM REFERENCE MANUAL    by Luis Carvalho
@@ -10,9 +10,10 @@ The Lua Interface to Vim				*lua* *Lua*
 2. The vim module		|lua-vim|
 3. List userdata		|lua-list|
 4. Dict userdata		|lua-dict|
-5. Buffer userdata		|lua-buffer|
-6. Window userdata		|lua-window|
-7. The luaeval function		|lua-luaeval|
+5. Funcref userdata		|lua-funcref|
+6. Buffer userdata		|lua-buffer|
+7. Window userdata		|lua-window|
+8. The luaeval function		|lua-luaeval|
 
 {Vi does not have any of these commands}
 
@@ -110,9 +111,31 @@ input range are stored in "vim.firstline" and "vim.lastline" respectively. The
 module also includes routines for buffer, window, and current line queries,
 Vim evaluation and command execution, and others.
 
-	vim.list()		Returns an empty list (see |List|).
-
-	vim.dict()		Returns an empty dictionary (see |Dictionary|).
+	vim.list([arg])		Returns an empty list or, if "arg" is a Lua
+				table with numeric keys 1, ..., n (a
+				"sequence"), returns a list l such that l[i] =
+				arg[i] for i = 1, ..., n (see |List|).
+				Non-numeric keys are not used to initialize
+				the list. See also |lua-eval| for conversion
+				rules. Example: >
+					:lua t = {math.pi, false, say = 'hi'}
+					:echo luaeval('vim.list(t)')
+					:" [3.141593, 0], 'say' is ignored
+<
+	vim.dict([arg])		Returns an empty dictionary or, if "arg" is a
+				Lua table, returns a dict d such that d[k] =
+				arg[k] for all string keys k in "arg" (see
+				|Dictionary|). Number keys are converted to
+				strings. Keys that are not strings are not
+				used to initialize the dictionary. See also
+				|lua-eval| for conversion rules. Example: >
+					:lua t = {math.pi, false, say = 'hi'}
+					:echo luaeval('vim.dict(t)')
+					:" {'say': 'hi'}, numeric keys ignored
+<
+	vim.funcref({name})	Returns a Funcref to function {name} (see
+				|Funcref|). It is equivalent to Vim's
+				"function". NOT IMPLEMENTED YET
 
 	vim.buffer([arg])	If "arg" is a number, returns buffer with
 				number "arg" in the buffer list or, if "arg"
@@ -131,9 +154,9 @@ Vim evaluation and command execution, and others.
 
 	vim.type({arg})		Returns the type of {arg}. It is equivalent to
 				Lua's "type" function, but returns "list",
-				"dict", "buffer", or "window" if {arg} is a
-				list, dictionary, buffer, or window,
-				respectively. Examples: >
+				"dict", "funcref", "buffer", or "window" if
+				{arg} is a list, dictionary, funcref, buffer,
+				or window, respectively. Examples: >
 					:lua l = vim.list()
 					:lua print(type(l), vim.type(l))
 					:" userdata list
@@ -229,7 +252,40 @@ Examples:
 <
 
 ==============================================================================
-5. Buffer userdata					*lua-buffer*
+5. Funcref userdata					*lua-funcref*
+
+Funcref userdata represent funcref variables in Vim. Funcrefs that were
+defined with a "dict" attribute need to be obtained as a dictionary key
+in order to have "self" properly assigned to the dictionary (see examples
+below.) A funcref "f" has the following properties:
+
+Properties
+----------
+	o "#f" is the name of the function referenced by "f"
+	o "f(...)" calls the function referenced by "f" (with arguments)
+
+Examples:
+>
+	:function I(x)
+	:  return a:x
+	:  endfunction
+	:let R = function('I')
+	:lua i1 = vim.funcref('I')
+	:lua i2 = vim.eval('R')
+	:lua print(#i1, #i2) -- both 'I'
+	:lua print(i1, i2, #i2(i1) == #i1(i2))
+	:function Mylen() dict
+	:  return len(self.data)
+	:  endfunction
+	:let mydict = {'data': [0, 1, 2, 3]}
+	:lua d = vim.eval('mydict'); d.len = vim.funcref('Mylen')
+	:echo mydict.len()
+	:lua l = d.len -- assign d as 'self'
+	:lua print(l())
+<
+
+==============================================================================
+6. Buffer userdata					*lua-buffer*
 
 Buffer userdata represent vim buffers. A buffer userdata "b" has the following
 properties and methods:
@@ -281,7 +337,7 @@ Examples:
 <
 
 ==============================================================================
-6. Window userdata					*lua-window*
+7. Window userdata					*lua-window*
 
 Window objects represent vim windows. A window userdata "w" has the following
 properties and methods:
@@ -313,7 +369,7 @@ Examples:
 <
 
 ==============================================================================
-7. The luaeval function					*lua-luaeval* *lua-eval*
+8. The luaeval function					*lua-luaeval* *lua-eval*
 
 The (dual) equivalent of "vim.eval" for passing Lua values to Vim is
 "luaeval". "luaeval" takes an expression string and an optional argument and
@@ -325,7 +381,13 @@ returns the result of the expression. It is semantically equivalent in Lua to:
 	    return chunk(arg) -- return typval
 	end
 <
-Note that "_A" receives the argument to "luaeval". Examples: >
+Note that "_A" receives the argument to "luaeval". Lua numbers, strings, and
+list, dict, and funcref userdata are converted to their Vim respective types,
+while Lua booleans are converted to numbers. An error is thrown if conversion
+of any of the remaining Lua types, including userdata other than lists, dicts,
+and funcrefs, is attempted.
+
+Examples: >
 
 	:echo luaeval('math.pi')
 	:lua a = vim.list():add('newlist')

runtime/doc/if_mzsch.txt

@@ -1,4 +1,4 @@
-*if_mzsch.txt*  For Vim version 7.3.  Last change: 2012 Dec 17
+*if_mzsch.txt*  For Vim version 7.4.  Last change: 2012 Dec 17
 
 
 		  VIM REFERENCE MANUAL    by Sergey Khorev

runtime/doc/if_ole.txt

@@ -1,4 +1,4 @@
-*if_ole.txt*    For Vim version 7.3.  Last change: 2008 Aug 16
+*if_ole.txt*    For Vim version 7.4.  Last change: 2008 Aug 16
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -197,7 +197,7 @@ files in it.
 --remote-silent "+call cursor(10, 27)"
 	      - Places the cursor on line 10 column 27
 In Vim >
-   :h --remote-silent for mor details
+   :h --remote-silent for more details
 
 [.Net remarks provided by Dave Fishburn and Brian Sturk]
 

runtime/doc/if_perl.txt

@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 7.3.  Last change: 2012 Oct 25
+*if_perl.txt*   For Vim version 7.4.  Last change: 2013 Oct 05
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 7.3.  Last change: 2013 May 21
+*if_pyth.txt*   For Vim version 7.4.  Last change: 2014 Jul 23
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -12,9 +12,10 @@ The Python Interface to Vim				*python* *Python*
 4. Range objects				|python-range|
 5. Window objects				|python-window|
 6. Tab page objects				|python-tabpage|
-7. pyeval(), py3eval() Vim functions		|python-pyeval|
-8. Dynamic loading				|python-dynamic|
-9. Python 3					|python3|
+7. vim.bindeval objects				|python-bindeval-objects|
+8. pyeval(), py3eval() Vim functions		|python-pyeval|
+9. Dynamic loading				|python-dynamic|
+10. Python 3					|python3|
 
 {Vi does not have any of these commands}
 
@@ -22,11 +23,12 @@ The Python 2.x interface is available only when Vim was compiled with the
 |+python| feature.
 The Python 3 interface is available only when Vim was compiled with the
 |+python3| feature.
+Both can be available at the same time, but read |python-2-and-3|.
 
 ==============================================================================
 1. Commands						*python-commands*
 
-					*:python* *:py* *E205* *E263* *E264*
+					*:python* *:py* *E263* *E264* *E887*
 :[range]py[thon] {stmt}
 			Execute Python statement {stmt}.  A simple check if
 			the `:python` command is working: >
@@ -171,47 +173,26 @@ vim.eval(str)						*python-eval*
 	'eval_expr', 'kind': 'f', 'filename': './src/eval.c'}]
 
 vim.bindeval(str)					*python-bindeval*
-	Like |python-eval|, but
-	1. if expression evaluates to |List| or |Dictionary| it is returned as 
-	   vimlist or vimdictionary python type that are connected to original 
-	   list or dictionary. Thus modifications to these objects imply 
-	   modifications of the original.
+	Like |python-eval|, but returns special objects described in 
+	|python-bindeval-objects|. These python objects let you modify (|List| 
+	or |Dictionary|) or call (|Funcref|) vim objects.
 
-	   Additionally, vim.List and vim.Dictionary type have read-write 
-	   `.locked` attribute that returns
-	     Value           Meaning ~
-	     zero            Variable is not locked
-	     vim.VAR_LOCKED  Variable is locked, but can be unlocked
-	     vim.VAR_FIXED   Variable is locked and can't be unlocked
-	   integer constants. If variable is not fixed, you can do 
-	   `var.locked=True` to lock it and `var.locked=False` to unlock. 
-	   There is no recursive locking like |:lockvar|! does. There is also 
-	   no way to lock a specific key or check whether it is locked (in any 
-	   case these locks are ignored by anything except |:let|: |extend()| 
-	   does not care, neither does python interface).
+vim.strwidth(str)					*python-strwidth*
+	Like |strwidth()|: returns number of display cells str occupies, tab 
+	is counted as one cell.
 
-	   vim.Dictionary type also supports `.scope` attribute which is one 
-	   of
-	     Value              Meaning ~
-	     zero               Dictionary is not a scope one
-	     vim.VAR_DEF_SCOPE  Function-local or global scope dictionary
-	     vim.VAR_SCOPE      Other scope dictionary
-
-	2. if expression evaluates to a function reference, then it returns 
-	   callable vim.Function object. Use self keyword argument to assign 
-	   |self| object for dictionary functions.
-
-	Note: this function has the same behavior as |lua-eval| (except that 
-	      lua does not support running vim functions), |python-eval| is 
-	      kept for backwards compatibility in order not to make scripts 
-	      relying on outputs of vim.eval() being a copy of original or 
-	      vim.eval("1") returning a string.
-
-	You can use "List", "Dictionary" and "Function" vim module attributes 
-	to test whether object has given type. These types are currently not 
-	subclassable, neither they contain constructors, so you can use them 
-	only for checks like `isinstance(obj, vim.List)`.
+vim.foreach_rtp(callable)				*python-foreach_rtp*
+	Call the given callable for each path in 'runtimepath' until either 
+	callable returns something but None, the exception is raised or there 
+	are no longer paths. If stopped in case callable returned non-None, 
+	vim.foreach_rtp function returns the value returned by callable.
 
+vim.chdir(*args, **kwargs)				*python-chdir*
+vim.fchdir(*args, **kwargs)				*python-fchdir*
+	Run os.chdir or os.fchdir, then all appropriate vim stuff.
+	Note: you should not use these functions directly, use os.chdir and 
+	      os.fchdir instead. Behavior of vim.fchdir is undefined in case 
+	      os.fchdir does not exist.
 
 Error object of the "vim" module
 
@@ -245,12 +226,12 @@ vim.windows						*python-windows*
 	    :py w in vim.windows	# Membership test
 	    :py n = len(vim.windows)	# Number of elements
 	    :py for w in vim.windows:	# Sequential access
-<	Note: vim.windows object always accesses current tab page,. 
+<	Note: vim.windows object always accesses current tab page. 
 	|python-tabpage|.windows objects are bound to parent |python-tabpage| 
 	object and always use windows from that tab page (or throw vim.error 
 	in case tab page was deleted). You can keep a reference to both 
 	without keeping a reference to vim module object or |python-tabpage|, 
-	they will not loose their properties in this case.
+	they will not lose their properties in this case.
 
 vim.tabpages						*python-tabpages*
 	A sequence object providing access to the list of vim tab pages. The 
@@ -326,6 +307,88 @@ Output from Python					*python-output*
 	supported, and may cause the program to crash.  This should probably be
 	fixed.
 
+		    *python2-directory* *python3-directory* *pythonx-directory*
+Python 'runtimepath' handling				*python-special-path*
+
+In python vim.VIM_SPECIAL_PATH special directory is used as a replacement for 
+the list of paths found in 'runtimepath': with this directory in sys.path and 
+vim.path_hooks in sys.path_hooks python will try to load module from 
+{rtp}/python2 (or python3) and {rtp}/pythonx (for both python versions) for 
+each {rtp} found in 'runtimepath'.
+
+Implementation is similar to the following, but written in C: >
+
+    from imp import find_module, load_module
+    import vim
+    import sys
+
+    class VimModuleLoader(object):
+        def __init__(self, module):
+            self.module = module
+
+        def load_module(self, fullname, path=None):
+            return self.module
+
+    def _find_module(fullname, oldtail, path):
+        idx = oldtail.find('.')
+        if idx > 0:
+            name = oldtail[:idx]
+            tail = oldtail[idx+1:]
+            fmr = find_module(name, path)
+            module = load_module(fullname[:-len(oldtail)] + name, *fmr)
+            return _find_module(fullname, tail, module.__path__)
+        else:
+            fmr = find_module(fullname, path)
+            return load_module(fullname, *fmr)
+
+    # It uses vim module itself in place of VimPathFinder class: it does not 
+    # matter for python which object has find_module function attached to as 
+    # an attribute.
+    class VimPathFinder(object):
+        @classmethod
+        def find_module(cls, fullname, path=None):
+            try:
+                return VimModuleLoader(_find_module(fullname, fullname, path or vim._get_paths()))
+            except ImportError:
+                return None
+
+        @classmethod
+        def load_module(cls, fullname, path=None):
+            return _find_module(fullname, fullname, path or vim._get_paths())
+
+    def hook(path):
+        if path == vim.VIM_SPECIAL_PATH:
+            return VimPathFinder
+        else:
+            raise ImportError
+
+    sys.path_hooks.append(hook)
+
+vim.VIM_SPECIAL_PATH					*python-VIM_SPECIAL_PATH*
+	String constant used in conjunction with vim path hook. If path hook 
+	installed by vim is requested to handle anything but path equal to 
+	vim.VIM_SPECIAL_PATH constant it raises ImportError. In the only other 
+	case it uses special loader.
+
+	Note: you must not use value of this constant directly, always use 
+	      vim.VIM_SPECIAL_PATH object.
+
+vim.find_module(...)					*python-find_module*
+vim.path_hook(path)					*python-path_hook*
+	Methods or objects used to implement path loading as described above. 
+	You should not be using any of these directly except for vim.path_hook 
+	in case you need to do something with sys.meta_path. It is not 
+	guaranteed that any of the objects will exist in the future vim 
+	versions.
+
+vim._get_paths						*python-_get_paths*
+	Methods returning a list of paths which will be searched for by path 
+	hook. You should not rely on this method being present in future 
+	versions, but can use it for debugging.
+
+	It returns a list of {rtp}/python2 (or {rtp}/python3) and 
+	{rtp}/pythonx directories for each {rtp} in 'runtimepath'.
+
 ==============================================================================
 3. Buffer objects					*python-buffer*
 
@@ -361,6 +424,13 @@ The buffer object attributes are:
 			this object will raise KeyError. If option is 
 			|global-local| and local value is missing getting it 
 			will return None.
+	b.name		String, RW. Contains buffer name (full path).
+			Note: when assigning to b.name |BufFilePre| and 
+			|BufFilePost| autocommands are launched.
+	b.number	Buffer number. Can be used as |python-buffers| key.
+			Read-only.
+	b.valid		True or False. Buffer object becomes invalid when 
+			corresponding buffer is wiped out.
 
 The buffer object methods are:
 	b.append(str)	Append a line to the buffer
@@ -465,6 +535,8 @@ Window attributes are:
 	row, col (read-only)	On-screen window position in display cells.
 				First position is zero.
 	tabpage (read-only)	Window tab page.
+	valid (read-write)	True or False. Window object becomes invalid 
+				when corresponding window is closed.
 
 The height attribute is writable only if the screen is split horizontally.
 The width attribute is writable only if the screen is split vertically.
@@ -488,17 +560,124 @@ Tab page attributes are:
 	windows		Like |python-windows|, but for current tab page.
 	vars		The tab page |t:| variables.
 	window		Current tabpage window.
+	valid		True or False. Tab page object becomes invalid when 
+			corresponding tab page is closed.
 
 TabPage object type is available using "TabPage" attribute of vim module.
 
 ==============================================================================
-7. pyeval() and py3eval() Vim functions			*python-pyeval*
+7. vim.bindeval objects				*python-bindeval-objects*
+
+vim.Dictionary object				*python-Dictionary*
+    Dictionary-like object providing access to vim |Dictionary| type.
+    Attributes:
+        Attribute  Description ~
+        locked     One of                       *python-.locked*
+                    Value           Description ~
+                    zero            Variable is not locked
+                    vim.VAR_LOCKED  Variable is locked, but can be unlocked
+                    vim.VAR_FIXED   Variable is locked and can't be unlocked
+                   Read-write. You can unlock locked variable by assigning 
+                   `True` or `False` to this attribute. No recursive locking 
+                   is supported.
+        scope      One of
+                    Value              Description ~
+                    zero               Dictionary is not a scope one
+                    vim.VAR_DEF_SCOPE  |g:| or |l:| dictionary
+                    vim.VAR_SCOPE      Other scope dictionary,
+                                       see |internal-variables|
+    Methods (note: methods do not support keyword arguments):
+        Method      Description ~
+        keys()      Returns a list with dictionary keys.
+        values()    Returns a list with dictionary values.
+        items()     Returns a list of 2-tuples with dictionary contents.
+        update(iterable), update(dictionary), update(**kwargs)
+                    Adds keys to dictionary.
+        get(key[, default=None])
+                    Obtain key from dictionary, returning the default if it is 
+                    not present.
+        pop(key[, default])
+                    Remove specified key from dictionary and return 
+                    corresponding value. If key is not found and default is 
+                    given returns the default, otherwise raises KeyError.
+        popitem()
+                    Remove random key from dictionary and return (key, value) 
+                    pair.
+        has_key(key)
+                    Check whether dictionary contains specified key, similar 
+                    to `key in dict`.
+
+        __new__(), __new__(iterable), __new__(dictionary), __new__(update)
+                    You can use `vim.Dictionary()` to create new vim 
+                    dictionaries. `d=vim.Dictionary(arg)` is the same as 
+                    `d=vim.bindeval('{}');d.update(arg)`. Without arguments 
+                    constructs empty dictionary.
+
+    Examples: >
+        d = vim.Dictionary(food="bar")		# Constructor
+        d['a'] = 'b'				# Item assignment
+        print d['a']				# getting item
+        d.update({'c': 'd'})			# .update(dictionary)
+        d.update(e='f')				# .update(**kwargs)
+        d.update((('g', 'h'), ('i', 'j')))	# .update(iterable)
+        for key in d.keys():			# .keys()
+        for val in d.values():			# .values()
+        for key, val in d.items():		# .items()
+        print isinstance(d, vim.Dictionary)	# True
+        for key in d:				# Iteration over keys
+        class Dict(vim.Dictionary):		# Subclassing
+<
+    Note: when iterating over keys you should not modify dictionary.
+
+vim.List object					*python-List*
+    Sequence-like object providing access to vim |List| type.
+    Supports `.locked` attribute, see |python-.locked|. Also supports the 
+    following methods:
+        Method          Description ~
+        extend(item)    Add items to the list.
+
+        __new__(), __new__(iterable)
+                        You can use `vim.List()` to create new vim lists. 
+                        `l=vim.List(iterable)` is the same as 
+                        `l=vim.bindeval('[]');l.extend(iterable)`. Without 
+                        arguments constructs empty list.
+    Examples: >
+        l = vim.List("abc")		# Constructor, result: ['a', 'b', 'c']
+        l.extend(['abc', 'def'])	# .extend() method
+        print l[1:]			# slicing
+        l[:0] = ['ghi', 'jkl']		# slice assignment
+        print l[0]			# getting item
+        l[0] = 'mno'			# assignment
+        for i in l:			# iteration
+        print isinstance(l, vim.List)	# True
+        class List(vim.List):		# Subclassing
+
+vim.Function object				*python-Function*
+    Function-like object, acting like vim |Funcref| object. Supports `.name` 
+    attribute and is callable. Accepts special keyword argument `self`, see 
+    |Dictionary-function|. You can also use `vim.Function(name)` constructor, 
+    it is the same as `vim.bindeval('function(%s)'%json.dumps(name))`.
+
+    Examples: >
+        f = vim.Function('tr')			# Constructor
+        print f('abc', 'a', 'b')		# Calls tr('abc', 'a', 'b')
+        vim.command('''
+            function DictFun() dict
+                return self
+            endfunction
+        ''')
+        f = vim.bindeval('function("DictFun")')
+        print f(self={})			# Like call('DictFun', [], {})
+        print isinstance(f, vim.Function)	# True
+
+==============================================================================
+8. pyeval() and py3eval() Vim functions			*python-pyeval*
 
 To facilitate bi-directional interface, you can use |pyeval()| and |py3eval()| 
 functions to evaluate Python expressions and pass their values to VimL.
 
 ==============================================================================
-8. Dynamic loading					*python-dynamic*
+9. Dynamic loading					*python-dynamic*
 
 On MS-Windows the Python library can be loaded dynamically.  The |:version|
 output then includes |+python/dyn|.
@@ -515,7 +694,7 @@ Currently the name is "python24.dll".  That is for Python 2.4.  To know for
 sure edit "gvim.exe" and search for "python\d*.dll\c".
 
 ==============================================================================
-9. Python 3						*python3*
+10. Python 3						*python3*
 
 							*:py3* *:python3*
 The `:py3` and `:python3` commands work similar to `:python`.  A simple check
@@ -533,7 +712,7 @@ Vim can be built in four ways (:version output):
 3. Python 3 support only    (-python, +python3 or +python3/dyn)
 4. Python 2 and 3 support   (+python/dyn, +python3/dyn)
 
-Some more details on the special case 4:
+Some more details on the special case 4:  *python-2-and-3*
 
 When Python 2 and Python 3 are both supported they must be loaded dynamically.
 
@@ -562,6 +741,11 @@ To work around such problems there are these options:
 3. You undefine PY_NO_RTLD_GLOBAL in auto/config.h after configuration.  This
    may crash Vim though.
 
+							*E880*
+Raising SystemExit exception in python isn't endorsed way to quit vim, use: >
+	:py vim.command("qall!")
+<
+
 							*has-python*
 You can test what Python version is available with: >
 	if has('python')

runtime/doc/if_ruby.txt

@@ -1,4 +1,4 @@
-*if_ruby.txt*   For Vim version 7.3.  Last change: 2012 Aug 02
+*if_ruby.txt*   For Vim version 7.4.  Last change: 2015 Feb 22
 
 
 		  VIM REFERENCE MANUAL    by Shugo Maeda
@@ -120,9 +120,13 @@ VIM::command({cmd})
 							*ruby-evaluate*
 VIM::evaluate({expr})
 	Evaluates {expr} using the vim internal expression evaluator (see
-	|expression|).  Returns the expression result as a string.
-	A |List| is turned into a string by joining the items and inserting
-	line breaks.
+	|expression|).  Returns the expression result as:
+	- a Integer if the Vim expression evaluates to a number
+	- a Float if the Vim expression evaluates to a float
+	- a String if the Vim expression evaluates to a string
+	- a Array if the Vim expression evaluates to a Vim list
+	- a Hash if the Vim expression evaluates to a Vim dictionary
+	Dictionaries and lists are recursively expanded.
 
 ==============================================================================
 3. VIM::Buffer objects					*ruby-buffer*

runtime/doc/if_sniff.txt

@@ -1,4 +1,4 @@
-*if_sniff.txt*	For Vim version 7.3.  Last change: 2005 Mar 29
+*if_sniff.txt*	For Vim version 7.4.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL

runtime/doc/if_tcl.txt

@@ -1,4 +1,4 @@
-*if_tcl.txt*    For Vim version 7.3.  Last change: 2012 Aug 02
+*if_tcl.txt*    For Vim version 7.4.  Last change: 2012 Aug 02
 
 
 		  VIM REFERENCE MANUAL    by Ingo Wilken

runtime/doc/indent.txt

@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 7.3.  Last change: 2013 May 20
+*indent.txt*    For Vim version 7.4.  Last change: 2014 Dec 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -545,10 +545,12 @@ The examples below assume a 'shiftwidth' of 4.
 	      (default 70 lines).
 
 								*cino-#*
-	#N    When N is non-zero recognize shell/Perl comments, starting with
-	      '#'.  Default N is zero: don't recognize '#' comments.  Note
-	      that lines starting with # will still be seen as preprocessor
-	      lines.
+	#N    When N is non-zero recognize shell/Perl comments starting with
+	      '#', do not recognize preprocessor lines; allow right-shifting
+	      lines that start with "#".
+	      When N is zero (default): don't recognize '#' comments, do
+	      recognize preprocessor lines; right-shifting lines that start
+	      with "#" does not work.
 
 
 The defaults, spelled out in full, are:
@@ -556,7 +558,7 @@ The defaults, spelled out in full, are:
 			c3,C0,/0,(2s,us,U0,w0,W0,k0,m0,j0,J0,)20,*70,#0
 
 Vim puts a line in column 1 if:
-- It starts with '#' (preprocessor directives), if 'cinkeys' contains '#'.
+- It starts with '#' (preprocessor directives), if 'cinkeys' contains '#0'.
 - It starts with a label (a keyword followed by ':', other than "case" and
   "default") and 'cinoptions' does not contain an 'L' entry with a positive
   value.
@@ -581,8 +583,8 @@ CLOJURE					*ft-clojure-indent* *clojure-indent*
 
 Clojure indentation differs somewhat from traditional Lisps, due in part to
 the use of square and curly brackets, and otherwise by community convention.
-These conventions are not always universally followed, so the Clojure indent
-script offers a few configurable options, listed below.
+These conventions are not universally followed, so the Clojure indent script
+offers a few configurable options, listed below.
 
 If the current vim does not include searchpairpos(), the indent script falls
 back to normal 'lisp' indenting, and the following options are ignored.
@@ -596,7 +598,6 @@ without limits.
 	" Default
 	let g:clojure_maxlines = 100
 <
-
 						*g:clojure_fuzzy_indent*
 					*g:clojure_fuzzy_indent_patterns*
 					*g:clojure_fuzzy_indent_blacklist*
@@ -650,7 +651,6 @@ default list below.
 	let g:clojure_special_indent_words =
 	   \ 'deftype,defrecord,reify,proxy,extend-type,extend-protocol,letfn'
 <
-
 					*g:clojure_align_multiline_strings*
 
 Align subsequent lines in multiline strings to the column after the opening
@@ -675,7 +675,28 @@ This option is off by default.
 	" Default
 	let g:clojure_align_multiline_strings = 0
 <
+						*g:clojure_align_subforms*
 
+By default, parenthesized compound forms that look like function calls and
+whose head subform is on its own line have subsequent subforms indented by
+two spaces relative to the opening paren:
+>
+	(foo
+	  bar
+	  baz)
+<
+Setting this option changes this behavior so that all subforms are aligned to
+the same column, emulating the default behavior of clojure-mode.el:
+>
+	(foo
+	 bar
+	 baz)
+<
+This option is off by default.
+>
+	" Default
+	let g:clojure_align_subforms = 0
+<
 
 FORTRAN							*ft-fortran-indent*
 
@@ -729,6 +750,50 @@ buffer-local variable as follows >
   let b:fortran_indent_less=1
 
 
+HTML				*ft-html-indent* *html-indent* *html-indenting*
+
+This is about variables you can set in your vimrc to customize HTML indenting.
+
+You can set the indent for the first line after <script> and <style>
+"blocktags" (default "zero"): >
+
+      :let g:html_indent_script1 = "inc"
+      :let g:html_indent_style1 = "inc"
+<
+      VALUE	MEANING ~
+      "zero"	zero indent
+      "auto"	auto indent (same indent as the blocktag)
+      "inc"	auto indent + one indent step
+
+Many tags increase the indent for what follows per default (see "Add Indent
+Tags" in the script).  You can add further tags with: >
+
+      :let g:html_indent_inctags = "html,body,head,tbody"
+
+You can also remove such tags with: >
+
+      :let g:html_indent_autotags = "th,td,tr,tfoot,thead"
+
+Default value is empty for both variables.  Note: the initial "inctags" are
+only defined once per Vim session.
+
+User variables are only read when the script is sourced.  To enable your
+changes during a session, without reloading the HTML file, you can manually
+do: >
+
+      :call HtmlIndent_CheckUserSettings()
+
+Detail:
+  Calculation of indent inside "blocktags" with "alien" content:
+      BLOCKTAG   INDENT EXPR	    WHEN APPLICABLE ~
+      <script> : {customizable}	    if first line of block
+	       : cindent(v:lnum)    if attributes empty or contain "java"
+	       : -1		    else (vbscript, tcl, ...)
+      <style>  : {customizable}	    if first line of block
+	       : GetCSSIndent()	    else
+      <!-- --> : -1
+
+
 PHP				*ft-php-indent* *php-indent* *php-indenting*
 
 NOTE:	PHP files will be indented correctly only if PHP |syntax| is active.
@@ -747,7 +812,7 @@ OPTIONS: ~
 PHP indenting can be altered in several ways by modifying the values of some
 global variables:
 
-								*php-comment*
+					*php-comment* *PHP_autoformatcomment*
 To not enable auto-formating of comments by default (if you want to use your
 own 'formatoptions'): >
     :let g:PHP_autoformatcomment = 0
@@ -756,6 +821,7 @@ Else, 't' will be removed from the 'formatoptions' string and "qrowcb" will be
 added, see |fo-table| for more information.
 -------------
 
+							*PHP_outdentSLComments*
 To add extra indentation to single-line comments: >
     :let g:PHP_outdentSLComments = N
 
@@ -767,6 +833,7 @@ Only single-line comments will be affected such as: >
     /* Comment */
 -------------
 
+							*PHP_default_indenting*
 To add extra indentation to every PHP lines with N being the number of
 'shiftwidth' to add: >
     :let g:PHP_default_indenting = N
@@ -786,14 +853,18 @@ For example, with N = 1, this will give:
 (Notice the extra indentation between the PHP container markers and the code)
 -------------
 
-To indent PHP tags as the surrounding code: >
-    :let g:PHP_outdentphpescape = 0
+							*PHP_outdentphpescape*
+To indent PHP escape tags as the surrounding non-PHP code (only affects the
+PHP escape tags): >
+:let g:PHP_outdentphpescape = 0
 -------------
 
+							*PHP_removeCRwhenUnix*
 To automatically remove '\r' characters when the 'fileformat' is set to Unix: >
     :let g:PHP_removeCRwhenUnix = 1
 -------------
 
+							*PHP_BracesAtCodeLevel*
 To indent braces at the same level than the code they contain: >
     :let g:PHP_BracesAtCodeLevel = 1
     
@@ -812,6 +883,7 @@ NOTE:	Indenting will be a bit slower if this option is used because some
 	optimizations won't be available.
 -------------
 
+							*PHP_vintage_case_default_indent*
 To indent 'case:' and 'default:' statements in switch() blocks: >
     :let g:PHP_vintage_case_default_indent = 1
 

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.3.  Last change: 2013 May 17
+*index.txt*     For Vim version 7.4.  Last change: 2015 Feb 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -702,12 +702,16 @@ tag		char	      note action in Normal mode	~
 |g'|		g'{mark}	1  like |'| but without changing the jumplist
 |g`|		g`{mark}	1  like |`| but without changing the jumplist
 |gstar|		g*		1  like "*", but without using "\<" and "\>"
+|g+|		g+		   go to newer text state N times
+|g,|		g,		1  go to N newer position in change list
+|g-|		g-		   go to older text state N times
 |g0|		g0		1  when 'wrap' off go to leftmost character of
 				   the current line that is on the screen;
 				   when 'wrap' on go to the leftmost character
 				   of the current screen line
 |g8|		g8		   print hex value of bytes used in UTF-8
 				   character under the cursor
+|g;|		g;		1  go to N older position in change list
 |g<|		g<		   display previous command output
 |g?|		g?		2  Rot13 encoding operator
 |g?g?|		g??		2  Rot13 encode current line
@@ -736,6 +740,7 @@ tag		char	      note action in Normal mode	~
 				   the screen; when 'wrap' on go to the
 				   leftmost non-white character of the current
 				   screen line
+|g_|		g_		1  cursor to the last CHAR N - 1 lines lower
 |ga|		ga		   print ascii value of character under the
 				   cursor
 |gd|		gd		1  go to definition of word under the cursor
@@ -801,6 +806,10 @@ tag		char	      note action in Normal mode	~
 |zE|		zE		   eliminate all folds
 |zF|		zF		   create a fold for N lines
 |zG|		zG		   mark word as good spelled word
+|zH|		zH		   when 'wrap' off scroll half a screenwidth
+				   to the right
+|zL|		zL		   when 'wrap' off scroll half a screenwidth
+				   to the left
 |zM|		zM		   set 'foldlevel' to zero
 |zN|		zN		   set 'foldenable'
 |zO|		zO		   open folds recursively
@@ -1120,8 +1129,8 @@ tag	      command	      action ~
 |:cNfile|	:cNf[ile]	go to last error in previous file
 |:cabbrev|	:ca[bbrev]	like ":abbreviate" but for Command-line mode
 |:cabclear|	:cabc[lear]	clear all abbreviations for Command-line mode
-|:caddbuffer|	:caddb[uffer]	add errors from buffer
-|:caddexpr|	:cad[dexpr]	add errors from expr
+|:caddbuffer|	:cad[dbuffer]	add errors from buffer
+|:caddexpr|	:cadde[xpr]	add errors from expr
 |:caddfile|	:caddf[ile]	add error message to current quickfix list
 |:call|		:cal[l]		call a function
 |:catch|	:cat[ch]	part of a :try command
@@ -1187,9 +1196,12 @@ tag	      command	      action ~
 |:digraphs|	:dig[raphs]	show or enter digraphs
 |:display|	:di[splay]	display registers
 |:djump|	:dj[ump]	jump to #define
-|:dlist|	:dl[ist]	list #defines
+|:dl|		:dl		short for |:delete| with the 'l' flag
+|:dl|		:del[ete]l	short for |:delete| with the 'l' flag
+|:dlist|	:dli[st]	list #defines
 |:doautocmd|	:do[autocmd]	apply autocommands to current buffer
 |:doautoall|	:doautoa[ll]	apply autocommands for all loaded buffers
+|:dp|		:d[elete]p	short for |:delete| with the 'p' flag
 |:drop|		:dr[op]		jump to window editing file or edit file in
 				current window
 |:dsearch|	:ds[earch]	list one #define
@@ -1237,6 +1249,7 @@ tag	      command	      action ~
 |:gvim|		:gv[im]		start the GUI
 |:hardcopy|	:ha[rdcopy]	send text to the printer
 |:help|		:h[elp]		open a help window
+|:helpclose|	:helpc[lose]	close one help window
 |:helpfind|	:helpf[ind]	dialog to open a help window
 |:helpgrep|	:helpg[rep]	like ":grep" but searches help files
 |:helptags|	:helpt[ags]	generate help tags for a directory
@@ -1268,6 +1281,7 @@ tag	      command	      action ~
 |:keepalt|	:keepa[lt]	following command keeps the alternate file
 |:keepmarks|	:kee[pmarks]	following command keeps marks where they are
 |:keepjumps|	:keepj[umps]	following command keeps jumplist and marks
+|:keeppatterns|	:keepp[atterns]	following command keeps search pattern history
 |:lNext|	:lN[ext]	go to previous entry in location list
 |:lNfile|	:lNf[ile]	go to last entry in previous file
 |:list|		:l[ist]		print lines
@@ -1353,13 +1367,14 @@ tag	      command	      action ~
 |:nmenu|	:nme[nu]	add menu for Normal mode
 |:nnoremap|	:nn[oremap]	like ":noremap" but for Normal mode
 |:nnoremenu|	:nnoreme[nu]	like ":noremenu" but for Normal mode
-|:noautocmd|	:noa[utocmd]	following command don't trigger autocommands
+|:noautocmd|	:noa[utocmd]	following commands don't trigger autocommands
 |:noremap|	:no[remap]	enter a mapping that will not be remapped
 |:nohlsearch|	:noh[lsearch]	suspend 'hlsearch' highlighting
 |:noreabbrev|	:norea[bbrev]	enter an abbreviation that will not be
 				remapped
 |:noremenu|	:noreme[nu]	enter a menu that will not be remapped
 |:normal|	:norm[al]	execute Normal mode commands
+|:noswapfile|	:nos[wapfile]	following commands don't create a swap file
 |:number|	:nu[mber]	print lines with line number
 |:nunmap|	:nun[map]	like ":unmap" but for Normal mode
 |:nunmenu|	:nunme[nu]	remove menu for Normal mode
@@ -1455,7 +1470,7 @@ tag	      command	      action ~
 				buffer list
 |:sbrewind|	:sbr[ewind]	split window and go to first file in the
 				buffer list
-|:scriptnames|	:scrip[tnames]	list names of all sourced Vim scripts
+|:scriptnames|	:scr[iptnames]	list names of all sourced Vim scripts
 |:scriptencoding| :scripte[ncoding]	encoding used in sourced Vim script
 |:scscope|	:scs[cope]	split window and execute cscope command
 |:set|		:se[t]		show or set options
@@ -1510,6 +1525,7 @@ tag	      command	      action ~
 |:sview|	:sv[iew]	split window and edit file read-only
 |:swapname|	:sw[apname]	show the name of the current swap file
 |:syntax|	:sy[ntax]	syntax highlighting
+|:syntime|	:synti[me]	measure syntax highlighting speed
 |:syncbind|	:sync[bind]	sync scroll binding
 |:t|		:t		same as ":copy"
 |:tNext|	:tN[ext]	jump to previous matching tag

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.3.  Last change: 2013 Apr 12
+*insert.txt*    For Vim version 7.4.  Last change: 2014 Aug 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -51,6 +51,8 @@ char		action	~
 		abbreviation.
 		Note: If your <Esc> key is hard to hit on your keyboard, train
 		yourself to use CTRL-[.
+		If Esc doesn't work and you are using a Mac, try CTRL-Esc.
+		Or disable Listening under Accessibility preferences.
 						*i_CTRL-C*
 CTRL-C		Quit insert mode, go back to Normal mode.  Do not check for
 		abbreviations.  Does not trigger the |InsertLeave| autocommand
@@ -136,6 +138,8 @@ CTRL-R {0-9a-z"%#*+:.-=}					*i_CTRL-R*
 				too.
 				When the result is a Float it's automatically
 				converted to a String.
+				When append() or setline() is invoked the undo
+				sequence will be broken.
 		See |registers| about registers.  {not in Vi}
 
 CTRL-R CTRL-R {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-R*
@@ -1300,7 +1304,7 @@ HTML							*ft-html-omni*
 XHTML							*ft-xhtml-omni*
 
 CTRL-X CTRL-O provides completion of various elements of (X)HTML files.  It is
-designed to support writing of XHTML 1.0 Strict files but will also works for
+designed to support writing of XHTML 1.0 Strict files but will also work for
 other versions of HTML. Features:
 
 - after "<" complete tag name depending on context (no div suggestion inside
@@ -1357,7 +1361,7 @@ Complete:
 
 Completion works in separate JavaScript files (&ft==javascript), inside of
 <script> tag of (X)HTML and in values of event attributes (including scanning
-of external files.
+of external files).
 
 DOM compatibility
 
@@ -1468,9 +1472,9 @@ knows how to color highlight.  It can be used for any filetype and provides a
 minimal language-sensitive completion.
 
 To enable syntax code completion you can run: >
-	setlocal omnifunc=syntaxcomplete#Complete
+    setlocal omnifunc=syntaxcomplete#Complete
 
-You can automate this by placing the following in your vimrc (after any
+You can automate this by placing the following in your |.vimrc| (after any
 ":filetype" command): >
     if has("autocmd") && exists("+omnifunc")
 	autocmd Filetype *
@@ -1487,7 +1491,7 @@ customize which syntax groups to include or exclude from the list.  Let's have
 a look at the PHP filetype to see how this works.
 
 If you edit a file called, index.php, run the following command: >
-	:syntax list
+    syntax list
 
 The first thing you will notice is that there are many different syntax groups.
 The PHP language can include elements from different languages like HTML,
@@ -1496,24 +1500,37 @@ that begin with the filetype, "php", in this case.  For example these syntax
 groups are included by default with the PHP: phpEnvVar, phpIntVar,
 phpFunctions.
 
-The PHP language has an enormous number of items which it knows how to syntax
-highlight.  This means these items will be available within the omni
-completion list.  Some people may find this list unwieldy or are only
-interested in certain items.
+If you wish non-filetype syntax items to also be included, you can use a 
+regular expression syntax (added in version 13.0 of autoload\syntaxcomplete.vim)
+to add items.  Looking at the output from ":syntax list" while editing a PHP file 
+I can see some of these entries: >
+    htmlArg,htmlTag,htmlTagName,javaScriptStatement,javaScriptGlobalObjects
 
-There are two ways to prune this list (if necessary).  If you find certain
-syntax groups you do not wish displayed you can add the following to your
-vimrc: >
-	let g:omni_syntax_group_exclude_php = 'phpCoreConstant,phpConstant'
+To pick up any JavaScript and HTML keyword syntax groups while editing a PHP
+file, you can use 3 different regexs, one for each language.  Or you can 
+simply restrict the include groups to a particular value, without using 
+a regex string: >
+    let g:omni_syntax_group_include_php = 'php\w\+,javaScript\w\+,html\w\+'
+    let g:omni_syntax_group_include_php = 'phpFunctions,phpMethods'
+<
+The basic form of this variable is: >
+    let g:omni_syntax_group_include_{filetype} = 'regex,comma,separated'
+
+The PHP language has an enormous number of items which it knows how to syntax
+highlight.  These items will be available within the omni completion list.
+
+Some people may find this list unwieldy or are only interested in certain
+items.  There are two ways to prune this list (if necessary).  If you find
+certain syntax groups you do not wish displayed you can use two different 
+methods to identify these groups.  The first specifically lists the syntax 
+groups by name.  The second uses a regular expression to identify both 
+syntax groups.  Simply add one the following to your vimrc: >
+    let g:omni_syntax_group_exclude_php = 'phpCoreConstant,phpConstant'
+    let g:omni_syntax_group_exclude_php = 'php\w*Constant'
 
 Add as many syntax groups to this list by comma separating them.  The basic
 form of this variable is: >
-	let g:omni_syntax_group_exclude_{filetype} = 'comma,separated,list'
-
-For completeness the opposite is also true.  Creating this variable in your
-vimrc will only include the items in the phpFunctions and phpMethods syntax
-groups: >
-	let g:omni_syntax_group_include_php = 'phpFunctions,phpMethods'
+    let g:omni_syntax_group_exclude_{filetype} = 'regex,comma,separated'
 
 You can create as many of these variables as you need, varying only the
 filetype at the end of the variable name.
@@ -1554,6 +1571,9 @@ To retrieve only the syntax items for the sqlOperator syntax group: >
 To retrieve all syntax items for both the sqlOperator and sqlType groups: >
     echo OmniSyntaxList( ['sqlOperator', 'sqlType'] )
 
+A regular expression can also be used: >
+    echo OmniSyntaxList( ['sql\w\+'] )
+
 From within a plugin, you would typically assign the output to a List: >
     let myKeywords = []
     let myKeywords = OmniSyntaxList( ['sqlKeyword'] )

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 7.3.  Last change: 2012 Sep 05
+*intro.txt*     For Vim version 7.4.  Last change: 2015 Jan 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -135,10 +135,11 @@ http://www.vim.org/maillist.php
 
 Bug reports:				*bugs* *bug-reports* *bugreport.vim*
 
-Send bug reports to: Vim Developers <vim_dev@vim.org>
-This is a maillist, many people will see the message.  If you don't want that,
-e.g. because it is a security issue, send it to <bugs@vim.org>, this only goes
-to the Vim maintainer (that's Bram).
+Send bug reports to: Vim Developers <vim-dev@vim.org>
+This is a maillist, you need to become a member first and many people will see
+the message.  If you don't want that, e.g. because it is a security issue,
+send it to <bugs@vim.org>, this only goes to the Vim maintainer (that's Bram).
+
 Please be brief; all the time that is spent on answering mail is subtracted
 from the time that is spent on improving Vim!  Always give a reproducible
 example and try to find out which settings or other things influence the
@@ -261,6 +262,7 @@ Vim would never have become what it is now, without the help of these people!
 I wish to thank all the people that sent me bug reports and suggestions.  The
 list is too long to mention them all here.  Vim would not be the same without
 the ideas from all these people: They keep Vim alive!
+*love* *peace* *friendship* *gross-national-happiness*
 
 
 In this documentation there are several references to other versions of Vi:

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.3.  Last change: 2013 May 05
+*map.txt*       For Vim version 7.4.  Last change: 2014 Dec 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -60,17 +60,17 @@ modes.
 			{rhs}, is then further scanned for mappings.  This
 			allows for nested and recursive use of mappings.
 
-
-:no[remap]  {lhs} {rhs}		|mapmode-nvo|		*:no*  *:noremap*
-:nn[oremap] {lhs} {rhs}		|mapmode-n|		*:nn*  *:nnoremap*
-:vn[oremap] {lhs} {rhs}		|mapmode-v|		*:vn*  *:vnoremap*
-:xn[oremap] {lhs} {rhs}		|mapmode-x|		*:xn*  *:xnoremap*
-:snor[emap] {lhs} {rhs}		|mapmode-s|		*:snor* *:snoremap*
-:ono[remap] {lhs} {rhs}		|mapmode-o|		*:ono* *:onoremap*
-:no[remap]! {lhs} {rhs}		|mapmode-ic|		*:no!* *:noremap!*
-:ino[remap] {lhs} {rhs}		|mapmode-i|		*:ino* *:inoremap*
-:ln[oremap] {lhs} {rhs}		|mapmode-l|		*:ln*  *:lnoremap*
-:cno[remap] {lhs} {rhs}		|mapmode-c|		*:cno* *:cnoremap*
+						*:nore* *:norem*
+:no[remap]  {lhs} {rhs}		|mapmode-nvo|	*:no*  *:noremap* *:nor*
+:nn[oremap] {lhs} {rhs}		|mapmode-n|	*:nn*  *:nnoremap*
+:vn[oremap] {lhs} {rhs}		|mapmode-v|	*:vn*  *:vnoremap*
+:xn[oremap] {lhs} {rhs}		|mapmode-x|	*:xn*  *:xnoremap*
+:snor[emap] {lhs} {rhs}		|mapmode-s|	*:snor* *:snoremap*
+:ono[remap] {lhs} {rhs}		|mapmode-o|	*:ono* *:onoremap*
+:no[remap]! {lhs} {rhs}		|mapmode-ic|	*:no!* *:noremap!*
+:ino[remap] {lhs} {rhs}		|mapmode-i|	*:ino* *:inoremap*
+:ln[oremap] {lhs} {rhs}		|mapmode-l|	*:ln*  *:lnoremap*
+:cno[remap] {lhs} {rhs}		|mapmode-c|	*:cno* *:cnoremap*
 			Map the key sequence {lhs} to {rhs} for the modes
 			where the map command applies.  Disallow mapping of
 			{rhs}, to avoid nested and recursive mappings.  Often
@@ -159,9 +159,9 @@ type "a", then "bar" will get inserted.
 
 1.2 SPECIAL ARGUMENTS					*:map-arguments*
 
-"<buffer>", "<silent>", "<special>", "<script>", "<expr>" and "<unique>" can
-be used in any order.  They must appear right after the command, before any
-other arguments.
+"<buffer>", "<nowait>", "<silent>", "<special>", "<script>", "<expr>" and
+"<unique>" can be used in any order.  They must appear right after the
+command, before any other arguments.
 
 				*:map-local* *:map-<buffer>* *E224* *E225*
 If the first argument to one of these commands is "<buffer>" the mapping will
@@ -169,12 +169,23 @@ be effective in the current buffer only.  Example: >
 	:map <buffer>  ,w  /[.,;]<CR>
 Then you can map ",w" to something else in another buffer: >
 	:map <buffer>  ,w  /[#&!]<CR>
-The local buffer mappings are used before the global ones.
+The local buffer mappings are used before the global ones.  See <nowait> below
+to make a short local mapping not taking effect when a longer global one
+exists.
 The "<buffer>" argument can also be used to clear mappings: >
 	:unmap <buffer> ,w
 	:mapclear <buffer>
 Local mappings are also cleared when a buffer is deleted, but not when it is
 unloaded.  Just like local option values.
+Also see |map-precedence|.
+
+						*:map-<nowait>* *:map-nowait*
+When defining a buffer-local mapping for "," there may be a global mapping
+that starts with ",".  Then you need to type another character for Vim to know
+whether to use the "," mapping or the longer one.  To avoid this add the
+<nowait> argument.  Then the mapping will be used when it matches, Vim does
+not wait for more characters to be typed.  However, if the characters were
+already type they are used.
 
 						*:map-<silent>* *:map-silent*
 To define a mapping which will not be echoed on the command line, add
@@ -295,9 +306,21 @@ is disabled.  This makes it possible to map zero without making it impossible
 to type a count with a zero.
 
 						*map-overview* *map-modes*
-Overview of which map command works in which mode:
+Overview of which map command works in which mode.  More details below.
+     COMMANDS                    MODES ~
+:map   :noremap  :unmap     Normal, Visual, Select, Operator-pending
+:nmap  :nnoremap :nunmap    Normal
+:vmap  :vnoremap :vunmap    Visual and Select
+:smap  :snoremap :sunmap    Select
+:xmap  :xnoremap :xunmap    Visual
+:omap  :onoremap :ounmap    Operator-pending
+:map!  :noremap! :unmap!    Insert and Command-line
+:imap  :inoremap :iunmap    Insert
+:lmap  :lnoremap :lunmap    Insert, Command-line, Lang-Arg
+:cmap  :cnoremap :cunmap    Command-line
 
-    commands:				      modes: ~
+
+    COMMANDS				      MODES ~
 				       Normal  Visual+Select  Operator-pending ~
 :map   :noremap   :unmap   :mapclear	 yes	    yes		   yes
 :nmap  :nnoremap  :nunmap  :nmapclear	 yes	     -		    -
@@ -313,7 +336,7 @@ NOTE: Mapping a printable character in Select mode may confuse the user.  It's
 better to explicitly use :xmap and :smap for printable characters.  Or use
 :sunmap after defining the mapping.
 
-    commands:				      modes: ~
+    COMMANDS				      MODES ~
 					  Visual    Select ~
 :vmap  :vnoremap  :vunmap  :vmapclear	    yes      yes
 :xmap  :xnoremap  :xunmap  :xmapclear	    yes       -
@@ -322,7 +345,7 @@ better to explicitly use :xmap and :smap for printable characters.  Or use
 			*mapmode-ic* *mapmode-i* *mapmode-c* *mapmode-l*
 Some commands work both in Insert mode and Command-line mode, some not:
 
-    commands:				      modes: ~
+    COMMANDS				      MODES ~
 					  Insert  Command-line	Lang-Arg ~
 :map!  :noremap!  :unmap!  :mapclear!	    yes	       yes	   -
 :imap  :inoremap  :iunmap  :imapclear	    yes		-	   -
@@ -369,11 +392,12 @@ it's just used here for this situation.
    The simplest way to load a set of related language mappings is by using the
 'keymap' option.  See |45.5|.
    In Insert mode and in Command-line mode the mappings can be disabled with
-the CTRL-^ command |i_CTRL-^| |c_CTRL-^|.  When starting to enter a normal
-command line (not a search pattern) the mappings are disabled until a CTRL-^
-is typed.  The state last used is remembered for Insert mode and Search
-patterns separately.  The state for Insert mode is also used when typing a
-character as an argument to command like "f" or "t".
+the CTRL-^ command |i_CTRL-^| |c_CTRL-^|. These commands change the value of
+the 'iminsert' option.  When starting to enter a normal command line (not a
+search pattern) the mappings are disabled until a CTRL-^ is typed.  The state
+last used is remembered for Insert mode and Search patterns separately.  The
+state for Insert mode is also used when typing a character as an argument to
+command like "f" or "t".
    Language mappings will never be applied to already mapped characters.  They
 are only used for typed characters.  This assumes that the language mapping
 was already done when typing the mapping.
@@ -581,12 +605,12 @@ illogical when compared to other commands.
 When you have a mapping that contains an Ex command, you need to put a line
 terminator after it to have it executed.  The use of <CR> is recommended for
 this (see |<>|).  Example: >
-   :map  _ls  :!ls -l %<CR>:echo "the end"<CR>
+   :map  _ls  :!ls -l %:S<CR>:echo "the end"<CR>
 
 To avoid mapping of the characters you type in insert or Command-line mode,
 type a CTRL-V first.  The mapping in Insert mode is disabled if the 'paste'
 option is on.
-
+							*map-error*
 Note that when an error is encountered (that causes an error message or beep)
 the rest of the mapping is not executed.  This is Vi-compatible.
 
@@ -654,6 +678,17 @@ option).  After that it assumes that the 'q' is to be interpreted as such.  If
 you type slowly, or your system is slow, reset the 'timeout' option.  Then you
 might want to set the 'ttimeout' option.
 
+                            				*map-precedence*
+Buffer-local mappings (defined using |:map-<buffer>|) take precedence over
+global mappings.  When a buffer-local mapping is the same as a global mapping,
+Vim will use the buffer-local mapping.  In addition, Vim will use a complete
+mapping immediately if it was defined with <nowait>, even if a longer mapping
+has the same prefix.  For example, given the following two mappings: >
+    :map <buffer> <nowait> \a   :echo "Local \a"<CR>
+    :map                   \abc :echo "Global \abc"<CR>
+When typing \a the buffer-local mapping will be used immediately.  Vim will
+not wait for more characters to see if the user might be typing \abc.
+
 							*map-keys-fails*
 There are situations where key codes might not be recognized:
 - Vim can only read part of the key code.  Mostly this is only the first
@@ -793,12 +828,10 @@ Here is an example that counts the number of spaces with <F4>: >
 	  let &selection = "inclusive"
 	  let reg_save = @@
 
-	  if a:0  " Invoked from Visual mode, use '< and '> marks.
-	    silent exe "normal! `<" . a:type . "`>y"
+	  if a:0  " Invoked from Visual mode, use gv command.
+	    silent exe "normal! gvy"
 	  elseif a:type == 'line'
 	    silent exe "normal! '[V']y"
-	  elseif a:type == 'block'
-	    silent exe "normal! `[\<C-V>`]y"
 	  else
 	    silent exe "normal! `[v`]y"
 	  endif
@@ -890,9 +923,11 @@ Examples: ({CURSOR} is where you type a non-keyword character) >
 <		"test;;"	  is not expanded
 		"test ;;"	  is expanded to "test <endofline>"
 
-To avoid the abbreviation in insert mode: Type part of the abbreviation, exit
-insert mode with <Esc>, re-enter insert mode with "a" and type the rest.  Or
-type CTRL-V before the character after the abbreviation.
+To avoid the abbreviation in Insert mode: Type CTRL-V before the character
+that would trigger the abbreviation.  E.g. CTRL-V <Space>.  Or type part of
+the abbreviation, exit insert mode with <Esc>, re-enter insert mode with "a"
+and type the rest.
+
 To avoid the abbreviation in Command-line mode: Type CTRL-V twice somewhere in
 the abbreviation to avoid it to be replaced.  A CTRL-V in front of a normal
 character is mostly ignored otherwise.
@@ -1242,6 +1277,7 @@ completion can be enabled:
 	-complete=shellcmd	Shell command
 	-complete=sign		|:sign| suboptions
 	-complete=syntax	syntax file names |'syntax'|
+	-complete=syntime	|:syntime| suboptions
 	-complete=tag		tags
 	-complete=tag_listfiles	tags, file names are shown when CTRL-D is hit
 	-complete=user		user names
@@ -1249,6 +1285,8 @@ completion can be enabled:
 	-complete=custom,{func} custom completion, defined via {func}
 	-complete=customlist,{func} custom completion, defined via {func}
 
+Note: That some completion methods might expand environment variables.
+
 
 Custom completion			*:command-completion-custom*
 					*:command-completion-customlist*
@@ -1320,6 +1358,19 @@ Possible attributes are:
 Note that -range=N and -count=N are mutually exclusive - only one should be
 specified.
 
+					*E889* *:command-addr*
+It is possible that the special characters in the range like ., $ or % which
+by default correspond to the current line, last line and the whole buffer,
+relate to arguments, (loaded) buffers, windows or tab pages.
+
+Possible values are:
+	-addr=lines		Range of lines (this is the default)
+	-addr=arguments		Range for arguments
+	-addr=buffers		Range for buffers (also not loaded buffers)
+	-addr=loaded_buffers	Range for loaded buffers
+	-addr=windows		Range for windows
+	-addr=tabs		Range for tab pages
+
 Special cases				*:command-bang* *:command-bar*
 					*:command-register* *:command-buffer*
 There are some special cases as well:
@@ -1335,6 +1386,8 @@ There are some special cases as well:
 In the cases of the -count and -register attributes, if the optional argument
 is supplied, it is removed from the argument list and is available to the
 replacement text separately.
+Note that these arguments can be abbreviated, but that is a deprecated
+feature.  Use the full name for new scripts.
 
 Replacement text
 

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 7.3.  Last change: 2013 May 18
+*mbyte.txt*     For Vim version 7.4.  Last change: 2013 May 18
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.