updated for version 7.0212

Filelist

@@ -2,7 +2,7 @@
 # Used by Makefile and upload.aap.
 
 # source files for all source archives
-SRC_ALL1 =	\
+SRC_ALL =	\
 		src/README.txt \
 		src/arabic.c \
 		src/arabic.h \
@@ -30,6 +30,7 @@ SRC_ALL1 =	\
 		src/gui.h \
 		src/gui_beval.c \
 		src/gui_beval.h \
+		src/hardcopy.c \
 		src/hashtable.c \
 		src/keymap.h \
 		src/macros.h \
@@ -51,12 +52,14 @@ SRC_ALL1 =	\
 		src/ops.c \
 		src/option.c \
 		src/option.h \
+		src/popupmenu.c \
 		src/quickfix.c \
 		src/regexp.c \
 		src/regexp.h \
 		src/screen.c \
 		src/search.c \
 		src/structs.h \
+		src/spell.c \
 		src/syntax.c \
 		src/tag.c \
 		src/term.c \
@@ -69,13 +72,12 @@ SRC_ALL1 =	\
 		src/vim.h \
 		src/window.c \
 		src/xxd/xxd.c \
-
-SRC_ALL2 =	\
 		src/main.aap \
 		src/testdir/main.aap \
 		src/testdir/*.in \
 		src/testdir/test[0-9]*.ok \
 		src/testdir/test49.vim \
+		src/testdir/test60.vim \
 		src/proto.h \
 		src/proto/buffer.pro \
 		src/proto/charset.pro \
@@ -93,6 +95,7 @@ SRC_ALL2 =	\
 		src/proto/getchar.pro \
 		src/proto/gui.pro \
 		src/proto/gui_beval.pro \
+		src/proto/hardcopy.pro \
 		src/proto/hashtable.pro \
 		src/proto/main.pro \
 		src/proto/mark.pro \
@@ -108,10 +111,12 @@ SRC_ALL2 =	\
 		src/proto/normal.pro \
 		src/proto/ops.pro \
 		src/proto/option.pro \
+		src/proto/popupmenu.pro \
 		src/proto/quickfix.pro \
 		src/proto/regexp.pro \
 		src/proto/screen.pro \
 		src/proto/search.pro \
+		src/proto/spell.pro \
 		src/proto/syntax.pro \
 		src/proto/tag.pro \
 		src/proto/term.pro \
@@ -132,7 +137,6 @@ SRC_UNIX =	\
 		pixmaps/gen-inline-pixbufs.sh \
 		pixmaps/stock_icons.h \
 		src/INSTALL \
-		src/INSTALLkde.txt \
 		src/Makefile \
 		src/auto/configure \
 		src/config.aap.in \
@@ -149,11 +153,6 @@ SRC_UNIX =	\
 		src/gui_gtk_f.c \
 		src/gui_gtk_f.h \
 		src/gui_gtk_x11.c \
-		src/gui_kde.cc \
-		src/gui_kde_wid.cc \
-		src/gui_kde_wid.h \
-		src/gui_kde_x11.cc \
-		src/kvim_iface.h \
 		src/gui_motif.c \
 		src/gui_xmdlg.c \
 		src/gui_xmebw.c \
@@ -179,8 +178,6 @@ SRC_UNIX =	\
 		src/proto/gui_athena.pro \
 		src/proto/gui_gtk.pro \
 		src/proto/gui_gtk_x11.pro \
-		src/proto/gui_kde.pro \
-		src/proto/gui_kde_x11.pro \
 		src/proto/gui_motif.pro \
 		src/proto/gui_xmdlg.pro \
 		src/proto/gui_x11.pro \
@@ -213,6 +210,7 @@ SRC_DOS_UNIX =	\
 		src/if_perlsfio.c \
 		src/if_python.c \
 		src/if_ruby.c \
+		src/if_sniff.h \
 		src/if_tcl.c \
 		src/proto/if_cscope.pro \
 		src/proto/if_mzsch.pro \
@@ -325,7 +323,7 @@ SRC_DOS =	\
 
 # source files for DOS without CR/LF translation (also in the extra archive)
 SRC_DOS_BIN =	\
-		src/VisVim/Res \
+		src/VisVim/Res/*.bmp \
 		src/tearoff.bmp \
 		src/tools.bmp \
 		src/tools16.bmp \
@@ -358,21 +356,15 @@ SRC_AMI =	\
 # source files for the Mac (also in the extra archive)
 SRC_MAC =	\
 		src/INSTALLmac.txt \
-		src/Make_mpw.mak \
 		src/dehqx.py \
 		src/gui_mac.c \
 		src/gui_mac.icns \
-		src/gui_mac.r \
-		src/os_mac.build \
-		src/os_mac.c \
 		src/os_mac.h \
 		src/os_mac.rsr.hqx \
-		src/os_mac.sit.hqx \
 		src/os_mac_conv.c \
 		src/os_macosx.c \
-		src/os_mac.pbproj/project.pbxproj \
 		src/proto/gui_mac.pro \
-		src/proto/os_mac.pro \
+		src/proto/os_mac_conv.pro \
 
 # source files for VMS (in the extra archive)
 SRC_VMS =	\
@@ -422,7 +414,6 @@ SRC_EXTRA =	\
 		src/gui_riscos.c \
 		src/gui_riscos.h \
 		src/if_sniff.c \
-		src/if_sniff.h \
 		src/infplist.xml \
 		src/link.390 \
 		src/os_beos.c \
@@ -454,6 +445,7 @@ RT_ALL =	\
 		runtime/gvimrc_example.vim \
 		runtime/macros/README.txt \
 		runtime/macros/dvorak \
+		runtime/macros/editexisting.vim \
 		runtime/macros/hanoi/click.me \
 		runtime/macros/hanoi/hanoi.vim \
 		runtime/macros/hanoi/poster \
@@ -507,6 +499,8 @@ RT_SCRIPTS =	\
 		runtime/delmenu.vim \
 		runtime/synmenu.vim \
 		runtime/makemenu.vim \
+		runtime/autoload/*.vim \
+		runtime/autoload/README.txt \
 		runtime/colors/*.vim \
 		runtime/colors/README.txt \
 		runtime/compiler/*.vim \
@@ -526,10 +520,6 @@ RT_UNIX =	\
 		runtime/KVim.desktop \
 		runtime/hi16-action-make.png \
 		runtime/hi22-action-make.png \
-		runtime/kde-tips \
-		runtime/kvim32x32.png \
-		runtime/kvim48x48.png \
-		runtime/kvim64x64.png \
 		runtime/vim16x16.png \
 		runtime/vim16x16.xpm \
 		runtime/vim32x32.png \
@@ -660,7 +650,12 @@ EXTRA =		\
 # generic language files
 LANG_GEN = \
 		README_lang.txt \
+		runtime/doc/*-fr.1 \
+		runtime/doc/*-fr.UTF-8.1 \
 		runtime/doc/*-it.1 \
+		runtime/doc/*-it.UTF-8.1 \
+		runtime/doc/*-ru.1 \
+		runtime/doc/*-ru.UTF-8.1 \
 		runtime/lang/README.txt \
 		runtime/lang/menu_*.vim \
 		runtime/keymap/README.txt \
@@ -673,15 +668,35 @@ LANG_GEN = \
 		runtime/tutor/tutor.ko.* \
 		runtime/tutor/tutor.pl.* \
 		runtime/tutor/tutor.ru.* \
+		runtime/tutor/tutor.sk.* \
 		runtime/tutor/tutor.zh.* \
+		runtime/spell/README.txt \
+		runtime/spell/??/*.diff \
+		runtime/spell/??/main.aap \
+		runtime/spell/yi/README.txt \
+		runtime/spell/main.aap \
+		runtime/spell/*.vim \
+		runtime/spell/fixdup \
+
+# generic language files, binary
+LANG_GEN_BIN = \
+		runtime/spell/README_en.txt \
+		runtime/spell/en.ascii.spl \
+		runtime/spell/en.latin1.spl \
+		runtime/spell/en.utf-8.spl \
+		runtime/spell/en.ascii.sug \
+		runtime/spell/en.latin1.sug \
+		runtime/spell/en.utf-8.sug \
 
 # all files for lang archive
 LANG_SRC = \
 		src/po/README.txt \
 		src/po/README_mingw.txt \
 		src/po/README_mvc.txt \
+		src/po/check.vim \
 		src/po/cleanup.vim \
 		src/po/Makefile \
+		src/po/Make_cyg.mak \
 		src/po/Make_ming.mak \
 		src/po/Make_mvc.mak \
 		src/po/sjiscorr.c \

Makefile

@@ -37,8 +37,6 @@ all install uninstall tools config configure proto depend lint tags types test t
 #
 # TARGET	PRODUCES		CONTAINS
 # unixall	vim-#.#.tar.bz2		Runtime files and Sources for Unix
-#    unixrt	vim-#.#-rt[12].tar.gz	Runtime files for Unix
-#    unixsrc	vim-#.#-src[12].tar.gz	Sources for Unix
 #
 # extra		vim-#.#-extra.tar.gz	Extra source and runtime files
 # lang		vim-#.#-lang.tar.gz	multi-language files
@@ -66,12 +64,12 @@ all install uninstall tools config configure proto depend lint tags types test t
 #
 #    All output files are created in the "dist" directory.  Existing files are
 #    overwritten!
-#    To do all this you need the unixrt, unixsrc, extra and lang archives, and
+#    To do all this you need the unix, extra and lang archives, and
 #    compiled binaries.
 #    Before creating an archive first delete all backup files, *.orig, etc.
 
-MAJOR = 6
-MINOR = 3
+MAJOR = 7
+MINOR = 0aa
 
 # Uncomment this line if the Win32s version is to be included.
 #DOSBIN_S =  dosbin_s
@@ -80,10 +78,11 @@ MINOR = 3
 #
 # - Update Vim version number.  For a test version in: src/version.h, Contents,
 #   MAJOR/MINOR above, VIMRTDIR and VERSION in src/Makefile, README*.txt,
-#   runtime/doc/*.txt and nsis/gvim.nsi.  For a minor/major version:
-#   src/GvimExt/GvimExt.reg, src/vim16.def.
+#   runtime/doc/*.txt and nsis/gvim.nsi. Other things in README_os2.txt.  For a
+#   minor/major version: src/GvimExt/GvimExt.reg, src/vim.def, src/vim16.def.
 # - Correct included_patches[] in src/version.c.
-# - Compile Vim with GTK, Perl, Python, TCL, Ruby, Cscope and "huge" features.
+# - Compile Vim with GTK, Perl, Python, TCL, Ruby, MZscheme, Cscope and "huge"
+#   features.  Exclude workshop and SNiFF.
 # - With these features: "make proto" (requires cproto and Motif installed;
 #   ignore warnings for missing include files, fix problems for syntax errors).
 # - With these features: "make depend" (works best with gcc).
@@ -125,7 +124,7 @@ MINOR = 3
 #   "uninstald16.exe".
 # 32 bit DOS version:
 # - Set environment for compiling with DJGPP; "gmake -f Make_djg.mak".
-# - "rm testdir/*.out", "make -f Make_djg.mak test" and check the output.
+# - "rm testdir/*.out", "gmake -f Make_djg.mak test" and check the output.
 # - Rename the executables to "vimd32.exe", "xxdd32.exe", "installd32.exe" and
 #   "uninstald32.exe".
 # Win32 console version:
@@ -262,10 +261,8 @@ dist/$(COMMENT_FARSI): dist/comment
 dist/$(COMMENT_LANG): dist/comment
 	echo "Vim - Vi IMproved - v$(VDOT) MS-Windows language files" > dist/$(COMMENT_LANG)
 
-unixrt: dist prepare
-	-rm -f dist/$(VIMVER)-rt1.tar.gz
-	-rm -f dist/$(VIMVER)-rt2.tar.gz
-# first runtime file
+unixall: dist prepare
+	-rm -f dist/$(VIMVER).tar.bz2
 	-rm -rf dist/$(VIMRTDIR)
 	mkdir dist/$(VIMRTDIR)
 	tar cf - \
@@ -273,35 +270,10 @@ unixrt: dist prepare
 		$(RT_ALL_BIN) \
 		$(RT_UNIX) \
 		$(RT_UNIX_DOS_BIN) \
-		| (cd dist/$(VIMRTDIR); tar xf -)
-	cd dist && tar cf $(VIMVER)-rt1.tar $(VIMRTDIR)
-	gzip -9 dist/$(VIMVER)-rt1.tar
-# second runtime file (script and language files)
-	-rm -rf dist/$(VIMRTDIR)
-	mkdir dist/$(VIMRTDIR)
-	tar cf - \
 		$(RT_SCRIPTS) \
 		$(LANG_GEN) \
-		| (cd dist/$(VIMRTDIR); tar xf -)
-	cd dist && tar cf $(VIMVER)-rt2.tar $(VIMRTDIR)
-	gzip -9 dist/$(VIMVER)-rt2.tar
-
-unixsrc: dist prepare
-	-rm -f dist/$(VIMVER)-src1.tar.gz
-	-rm -f dist/$(VIMVER)-src2.tar.gz
-# first source file
-	-rm -rf dist/$(VIMRTDIR)
-	mkdir dist/$(VIMRTDIR)
-	tar cf - \
-		$(SRC_ALL1) \
-		| (cd dist/$(VIMRTDIR); tar xf -)
-	cd dist && tar cf $(VIMVER)-src1.tar $(VIMRTDIR)
-	gzip -9 dist/$(VIMVER)-src1.tar
-# second source file
-	-rm -rf dist/$(VIMRTDIR)
-	mkdir dist/$(VIMRTDIR)
-	tar cf - \
-		$(SRC_ALL2) \
+		$(LANG_GEN_BIN) \
+		$(SRC_ALL) \
 		$(SRC_UNIX) \
 		$(SRC_DOS_UNIX) \
 		| (cd dist/$(VIMRTDIR); tar xf -)
@@ -309,21 +281,6 @@ unixsrc: dist prepare
 	cp -f src/config.mk.dist dist/$(VIMRTDIR)/src/auto/config.mk
 # Create an empty config.h file, make dependencies require it
 	touch dist/$(VIMRTDIR)/src/auto/config.h
-# Make sure configure is newer than config.mk to force it to be generated
-	touch dist/$(VIMRTDIR)/src/configure
-	cd dist && tar cf $(VIMVER)-src2.tar $(VIMRTDIR)
-	gzip -9 dist/$(VIMVER)-src2.tar
-
-unixall: dist unixsrc unixrt
-	-rm -f dist/$(VIMVER).tar.bz2
-	-rm -rf dist/$(VIMRTDIR)
-	mkdir dist/$(VIMRTDIR)
-	cd dist && tar xfz $(VIMVER)-src1.tar.gz
-	cd dist && tar xfz $(VIMVER)-src2.tar.gz
-	cd dist && tar xfz $(VIMVER)-rt1.tar.gz
-	cd dist && tar xfz $(VIMVER)-rt2.tar.gz
-# Create an empty config.h file, make dependencies require it
-	touch dist/$(VIMRTDIR)/src/auto/config.h
 # Make sure configure is newer than config.mk to force it to be generated
 	touch dist/$(VIMRTDIR)/src/configure
 	cd dist && tar cf $(VIMVER).tar $(VIMRTDIR)
@@ -404,8 +361,7 @@ amisrc: dist prepare
 	mkdir dist/Vim/$(VIMRTDIR)
 	tar cf - \
 		$(ROOT_AMI) \
-		$(SRC_ALL1) \
-		$(SRC_ALL2) \
+		$(SRC_ALL) \
 		$(SRC_AMI) \
 		$(SRC_AMI_DOS) \
 		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
@@ -422,12 +378,15 @@ dosrt: dist dist/$(COMMENT_RT) dosrt_unix2dos
 	-rm -rf dist/vim$(VERSION)rt.zip
 	cd dist && zip -9 -rD -z vim$(VERSION)rt.zip vim <$(COMMENT_RT)
 
+# Split in two parts to avoid a "argument list too long" error.
 dosrt_unix2dos: dist prepare no_title.vim
 	-rm -rf dist/vim
 	mkdir dist/vim
 	mkdir dist/vim/$(VIMRTDIR)
 	tar cf - \
 		$(RT_ALL) \
+		| (cd dist/vim/$(VIMRTDIR); tar xf -)
+	tar cf - \
 		$(RT_SCRIPTS) \
 		$(RT_DOS) \
 		$(RT_NO_UNIX) \
@@ -439,6 +398,7 @@ dosrt_unix2dos: dist prepare no_title.vim
 		$(RT_UNIX_DOS_BIN) \
 		$(RT_ALL_BIN) \
 		$(RT_DOS_BIN) \
+		$(LANG_GEN_BIN) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
 	mv dist/vim/$(VIMRTDIR)/runtime/* dist/vim/$(VIMRTDIR)
 	rmdir dist/vim/$(VIMRTDIR)/runtime
@@ -588,8 +548,7 @@ dossrc: dist no_title.vim dist/$(COMMENT_SRC) runtime/doc/uganda.nsis.txt
 	mkdir dist/vim
 	mkdir dist/vim/$(VIMRTDIR)
 	tar cf - \
-		$(SRC_ALL1) \
-		$(SRC_ALL2) \
+		$(SRC_ALL) \
 		$(SRC_DOS) \
 		$(SRC_AMI_DOS) \
 		$(SRC_DOS_UNIX) \

README_os2.txt

@@ -5,28 +5,28 @@ See "README.txt" for general information about Vim.
 
 
 NOTE: You will need two archives:
-  vim62rt.zip	contains the runtime files (same as for the PC version)
-  vim62os2.zip	contains the OS/2 executables
+  vim70rt.zip	contains the runtime files (same as for the PC version)
+  vim70os2.zip	contains the OS/2 executables
 
 1. Go to the directory where you want to put the Vim files.  Examples:
 	cd C:\
 	cd D:\editors
 
-2. Unpack the zip archives.  This will create a new directory "vim/vim62",
+2. Unpack the zip archives.  This will create a new directory "vim/vim70",
    in which all the distributed Vim files are placed.  Since the directory
    name includes the version number, it is unlikely that you overwrite
    existing files.
    Examples:
-	pkunzip -d vim62os2.zip
-	unzip vim62os2.zip
+	pkunzip -d vim70os2.zip
+	unzip vim70os2.zip
 
    After you unpacked the files, you can still move the whole directory tree
    to another location.
 
 3. Add the directory where vim.exe is to your path.  The simplest is to add a
    line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim62
-	set path=%path%;D:\editors\vim\vim62
+	set path=%path%;C:\vim\vim70
+	set path=%path%;D:\editors\vim\vim70
 
 That's it!
 
@@ -41,10 +41,10 @@ Extra remarks:
 	C:\vim\_viminfo			Dynamic info for 'viminfo'.
 	C:\vim\...			Other files you made.
   Distributed files:
-	C:\vim\vim62\vim.exe		The Vim version 6.2 executable.
-	C:\vim\vim62\doc\*.txt		The version 6.2 documentation files.
-	C:\vim\vim62\bugreport.vim	A Vim version 6.2 script.
-	C:\vim\vim62\...		Other version 6.2 distributed files.
+	C:\vim\vim70\vim.exe		The Vim version 7.0 executable.
+	C:\vim\vim70\doc\*.txt		The version 7.0 documentation files.
+	C:\vim\vim70\bugreport.vim	A Vim version 7.0 script.
+	C:\vim\vim70\...		Other version 7.0 distributed files.
   In this case the $VIM environment variable would be set like this:
 	set VIM=C:\vim
 

README_vms.txt

@@ -14,27 +14,34 @@ To compile Vim yourself you need three archives:
   vim-X.X-extra.tar.gz	extra source files
 
 Compilation is recommended, in order to make sure that the correct
-libraries are used for your specific system.  However, you might not be
-able to compile Vim, read more from src/INSTALLvms.txt.
+libraries are used for your specific system.  Read about compiling in
+src/INSTALLvms.txt.
 
 To use the binary version, you need one of these archives:
 
-  vim-XX-exe-alpha-gui.zip	Alpha GUI/Motif executables
-  vim-XX-exe-alpha-gtk.zip      Alpha GUI/GTK executables
-  vim-XX-exe-alpha-term.zip	Alpha console executables
+  vim-XX-exe-ia64-gui.zip       IA64 GUI/Motif executables
+  vim-XX-exe-ia64-gtk.zip       IA64 GUI/GTK executables
+  vim-XX-exe-ia64-term.zip      IA64 console executables
+  vim-XX-exe-axp-gui.zip        Alpha GUI/Motif executables
+  vim-XX-exe-axp-gtk.zip        Alpha GUI/GTK executables
+  vim-XX-exe-axp-term.zip       Alpha console executables
   vim-XX-exe-vax-gui.zip	VAX GUI executables
-  vim-XX-exe-vax-term.zip	VAX console executables
+  vim-XX-exe-vax-term.zip       VAX console executables
 
 and of course
   vim-XX-runtime.zip		runtime files
 
-The binary archives contain: vim.exe, ctags.exe, xxd.exe, mms_vim.exe files,
+The binary archives contain: vim.exe, ctags.exe, xxd.exe files,
 but there are also prepared "deploy ready" archives:
 
-vim-XX-alpha.zip		GUI and console executables with runtime and
-				help files for Alpha systems
-vim-XX-vax.zip			GUI and console executables with runtime and
-				help files for VAX systems
+vim-XX-ia64.zip                 GUI and console executables with runtime and
+                                help files for IA64 systems
+vim-XX-axp.zip                  GUI and console executables with runtime and
+                                help files for Alpha systems
+vim-XX-vax.zip                  GUI and console executables with runtime and
+                                help files for VAX systems
+
+GTK builds need LIBGTK library installed.
 
 These executables and up to date patches for OpenVMS system are downloadable
 from http://www.polarhome.com/vim/ or ftp://ftp.polarhome.com/pub/vim/

runtime/autoload/README.txt

@@ -0,0 +1,15 @@
+The autoload directory is for standard Vim autoload scripts.
+
+These are functions used by plugins and for general use.  They will be loaded
+automatically when the function is invoked.  See ":help autoload".
+
+gzip.vim	for editing compressed files
+netrw.vim	browsing (remote) directories and editing remote files
+tar.vim		browsing tar files
+zip.vim		browsing zip files
+
+Occult completion files:
+ccomplete.vim		C
+csscomplete.vim		HTML / CSS
+htmlcomplete.vim	HTML
+

runtime/autoload/ccomplete.vim

@@ -0,0 +1,422 @@
+" Vim completion script
+" Language:	C
+" Maintainer:	Bram Moolenaar <Bram@vim.org>
+" Last Change:	2006 Feb 10
+
+
+" This function is used for the 'omnifunc' option.
+function! ccomplete#Complete(findstart, base)
+  if a:findstart
+    " Locate the start of the item, including ".", "->" and "[...]".
+    let line = getline('.')
+    let start = col('.') - 1
+    let lastword = -1
+    while start > 0
+      if line[start - 1] =~ '\w'
+	let start -= 1
+      elseif line[start - 1] =~ '\.'
+	if lastword == -1
+	  let lastword = start
+	endif
+	let start -= 1
+      elseif start > 1 && line[start - 2] == '-' && line[start - 1] == '>'
+	if lastword == -1
+	  let lastword = start
+	endif
+	let start -= 2
+      elseif line[start - 1] == ']'
+	" Skip over [...].
+	let n = 0
+	let start -= 1
+	while start > 0
+	  let start -= 1
+	  if line[start] == '['
+	    if n == 0
+	      break
+	    endif
+	    let n -= 1
+	  elseif line[start] == ']'  " nested []
+	    let n += 1
+	  endif
+	endwhile
+      else
+	break
+      endif
+    endwhile
+
+    " Return the column of the last word, which is going to be changed.
+    " Remember the text that comes before it in s:prepended.
+    if lastword == -1
+      let s:prepended = ''
+      return start
+    endif
+    let s:prepended = strpart(line, start, lastword - start)
+    return lastword
+  endif
+
+  " Return list of matches.
+
+  let base = s:prepended . a:base
+
+  " Don't do anything for an empty base, would result in all the tags in the
+  " tags file.
+  if base == ''
+    return []
+  endif
+
+  " Split item in words, keep empty word after "." or "->".
+  " "aa" -> ['aa'], "aa." -> ['aa', ''], "aa.bb" -> ['aa', 'bb'], etc.
+  " We can't use split, because we need to skip nested [...].
+  let items = []
+  let s = 0
+  while 1
+    let e = match(base, '\.\|->\|\[', s)
+    if e < 0
+      if s == 0 || base[s - 1] != ']'
+	call add(items, strpart(base, s))
+      endif
+      break
+    endif
+    if s == 0 || base[s - 1] != ']'
+      call add(items, strpart(base, s, e - s))
+    endif
+    if base[e] == '.'
+      let s = e + 1	" skip over '.'
+    elseif base[e] == '-'
+      let s = e + 2	" skip over '->'
+    else
+      " Skip over [...].
+      let n = 0
+      let s = e
+      let e += 1
+      while e < len(base)
+	if base[e] == ']'
+	  if n == 0
+	    break
+	  endif
+	  let n -= 1
+	elseif base[e] == '['  " nested [...]
+	  let n += 1
+	endif
+	let e += 1
+      endwhile
+      let e += 1
+      call add(items, strpart(base, s, e - s))
+      let s = e
+    endif
+  endwhile
+
+  " Find the variable items[0].
+  " 1. in current function (like with "gd")
+  " 2. in tags file(s) (like with ":tag")
+  " 3. in current file (like with "gD")
+  let res = []
+  if searchdecl(items[0], 0, 1) == 0
+    " Found, now figure out the type.
+    " TODO: join previous line if it makes sense
+    let line = getline('.')
+    let col = col('.')
+    if len(items) == 1
+      " Completing one word and it's a local variable: May add '[', '.' or
+      " '->'.
+      let match = items[0]
+      if match(line, match . '\s*\[') > 0
+	let match .= '['
+      else
+	let res = s:Nextitem(strpart(line, 0, col), [''], 0)
+	if len(res) > 0
+	  " There are members, thus add "." or "->".
+	  if match(line, '\*[ \t(]*' . match . '\>') > 0
+	    let match .= '->'
+	  else
+	    let match .= '.'
+	  endif
+	endif
+      endif
+      let res = [{'match': match, 'tagline' : ''}]
+    else
+      " Completing "var.", "var.something", etc.
+      let res = s:Nextitem(strpart(line, 0, col), items[1:], 0)
+    endif
+  endif
+
+  if len(items) == 1
+    " Only one part, no "." or "->": complete from tags file.
+    call extend(res, map(taglist('^' . base), 's:Tag2item(v:val)'))
+  endif
+
+  if len(res) == 0
+    " Find the variable in the tags file(s)
+    let diclist = taglist('^' . items[0] . '$')
+
+    let res = []
+    for i in range(len(diclist))
+      " New ctags has the "typename" field.
+      if has_key(diclist[i], 'typename')
+	call extend(res, s:StructMembers(diclist[i]['typename'], items[1:]))
+      endif
+
+      " For a variable use the command, which must be a search pattern that
+      " shows the declaration of the variable.
+      if diclist[i]['kind'] == 'v'
+	let line = diclist[i]['cmd']
+	if line[0] == '/' && line[1] == '^'
+	  let col = match(line, '\<' . items[0] . '\>')
+	  call extend(res, s:Nextitem(strpart(line, 2, col - 2), items[1:], 0))
+	endif
+      endif
+    endfor
+  endif
+
+  if len(res) == 0 && searchdecl(items[0], 1) == 0
+    " Found, now figure out the type.
+    " TODO: join previous line if it makes sense
+    let line = getline('.')
+    let col = col('.')
+    let res = s:Nextitem(strpart(line, 0, col), items[1:], 0)
+  endif
+
+  " If the last item(s) are [...] they need to be added to the matches.
+  let last = len(items) - 1
+  let brackets = ''
+  while last >= 0
+    if items[last][0] != '['
+      break
+    endif
+    let brackets = items[last] . brackets
+    let last -= 1
+  endwhile
+
+  return map(res, 's:Tagline2item(v:val, brackets)')
+endfunc
+
+function! s:GetAddition(line, match, memarg, bracket)
+  " Guess if the item is an array.
+  if a:bracket && match(a:line, a:match . '\s*\[') > 0
+    return '['
+  endif
+
+  " Check if the item has members.
+  if len(s:SearchMembers(a:memarg, [''])) > 0
+    " If there is a '*' before the name use "->".
+    if match(a:line, '\*[ \t(]*' . a:match . '\>') > 0
+      return '->'
+    else
+      return '.'
+    endif
+  endif
+  return ''
+endfunction
+
+" Turn the tag info "val" into an item for completion.
+" "val" is is an item in the list returned by taglist().
+" If it is a variable we may add "." or "->".  Don't do it for other types,
+" such as a typedef, by not including the info that s:GetAddition() uses.
+function! s:Tag2item(val)
+  let x = s:Tagcmd2extra(a:val['cmd'], a:val['name'], a:val['filename'])
+
+  if has_key(a:val, "kind")
+    if a:val["kind"] == 'v'
+      return {'match': a:val['name'], 'tagline': "\t" . a:val['cmd'], 'dict': a:val, 'extra': x}
+    endif
+    if a:val["kind"] == 'f'
+      return {'match': a:val['name'] . '(', 'tagline': "", 'extra': x}
+    endif
+  endif
+  return {'match': a:val['name'], 'tagline': '', 'extra': x}
+endfunction
+
+" Turn a match item "val" into an item for completion.
+" "val['match']" is the matching item.
+" "val['tagline']" is the tagline in which the last part was found.
+function! s:Tagline2item(val, brackets)
+  let line = a:val['tagline']
+  let word = a:val['match'] . a:brackets . s:GetAddition(line, a:val['match'], [a:val], a:brackets == '')
+  if has_key(a:val, 'extra')
+    return {'word': word, 'menu': a:val['extra']}
+  endif
+
+  " Isolate the command after the tag and filename.
+  let s = matchstr(line, '[^\t]*\t[^\t]*\t\zs\(/^.*$/\|[^\t]*\)\ze\(;"\t\|\t\|$\)')
+  if s != ''
+    return {'word': word, 'menu': s:Tagcmd2extra(s, a:val['match'], matchstr(line, '[^\t]*\t\zs[^\t]*\ze\t'))}
+  endif
+  return {'word': word}
+endfunction
+
+" Turn a command from a tag line to something that is useful in the menu
+function! s:Tagcmd2extra(cmd, name, fname)
+  if a:cmd =~ '^/^'
+    " The command is a search command, useful to see what it is.
+    let x = matchstr(a:cmd, '^/^\zs.*\ze$/')
+    let x = substitute(x, a:name, '@@', '')
+    let x = substitute(x, '\\\(.\)', '\1', 'g')
+    let x = x . ' - ' . a:fname
+  elseif a:cmd =~ '^\d*$'
+    " The command is a line number, the file name is more useful.
+    let x = a:fname . ' - ' . a:cmd
+  else
+    " Not recognized, use command and file name.
+    let x = a:cmd . ' - ' . a:fname
+  endif
+  return x
+endfunction
+
+" Find composing type in "lead" and match items[0] with it.
+" Repeat this recursively for items[1], if it's there.
+" When resolving typedefs "depth" is used to avoid infinite recursion.
+" Return the list of matches.
+function! s:Nextitem(lead, items, depth)
+
+  " Use the text up to the variable name and split it in tokens.
+  let tokens = split(a:lead, '\s\+\|\<')
+
+  " Try to recognize the type of the variable.  This is rough guessing...
+  let res = []
+  for tidx in range(len(tokens))
+
+    " Recognize "struct foobar" and "union foobar".
+    if (tokens[tidx] == 'struct' || tokens[tidx] == 'union') && tidx + 1 < len(tokens)
+      let res = s:StructMembers(tokens[tidx] . ':' . tokens[tidx + 1], a:items)
+      break
+    endif
+
+    " TODO: add more reserved words
+    if index(['int', 'short', 'char', 'float', 'double', 'static', 'unsigned', 'extern'], tokens[tidx]) >= 0
+      continue
+    endif
+
+    " Use the tags file to find out if this is a typedef.
+    let diclist = taglist('^' . tokens[tidx] . '$')
+    for tagidx in range(len(diclist))
+      " New ctags has the "typename" field.
+      if has_key(diclist[tagidx], 'typename')
+	call extend(res, s:StructMembers(diclist[tagidx]['typename'], a:items))
+	continue
+      endif
+
+      " Only handle typedefs here.
+      if diclist[tagidx]['kind'] != 't'
+	continue
+      endif
+
+      " For old ctags we recognize "typedef struct aaa" and
+      " "typedef union bbb" in the tags file command.
+      let cmd = diclist[tagidx]['cmd']
+      let ei = matchend(cmd, 'typedef\s\+')
+      if ei > 1
+	let cmdtokens = split(strpart(cmd, ei), '\s\+\|\<')
+	if len(cmdtokens) > 1
+	  if cmdtokens[0] == 'struct' || cmdtokens[0] == 'union'
+	    let name = ''
+	    " Use the first identifier after the "struct" or "union"
+	    for ti in range(len(cmdtokens) - 1)
+	      if cmdtokens[ti] =~ '^\w'
+		let name = cmdtokens[ti]
+		break
+	      endif
+	    endfor
+	    if name != ''
+	      call extend(res, s:StructMembers(cmdtokens[0] . ':' . name, a:items))
+	    endif
+	  elseif a:depth < 10
+	    " Could be "typedef other_T some_T".
+	    call extend(res, s:Nextitem(cmdtokens[0], a:items, a:depth + 1))
+	  endif
+	endif
+      endif
+    endfor
+    if len(res) > 0
+      break
+    endif
+  endfor
+
+  return res
+endfunction
+
+
+" Search for members of structure "typename" in tags files.
+" Return a list with resulting matches.
+" Each match is a dictionary with "match" and "tagline" entries.
+function! s:StructMembers(typename, items)
+  " Todo: What about local structures?
+  let fnames = join(map(tagfiles(), 'escape(v:val, " \\")'))
+  if fnames == ''
+    return []
+  endif
+
+  let typename = a:typename
+  let qflist = []
+  while 1
+    exe 'silent! vimgrep /\t' . typename . '\(\t\|$\)/j ' . fnames
+    let qflist = getqflist()
+    if len(qflist) > 0 || match(typename, "::") < 0
+      break
+    endif
+    " No match for "struct:context::name", remove "context::" and try again.
+    let typename = substitute(typename, ':[^:]*::', ':', '')
+  endwhile
+
+  let matches = []
+  for l in qflist
+    let memb = matchstr(l['text'], '[^\t]*')
+    if memb =~ '^' . a:items[0]
+      call add(matches, {'match': memb, 'tagline': l['text']})
+    endif
+  endfor
+
+  if len(matches) > 0
+    " Skip over [...] items
+    let idx = 1
+    while 1
+      if idx >= len(a:items)
+	return matches		" No further items, return the result.
+      endif
+      if a:items[idx][0] != '['
+	break
+      endif
+      let idx += 1
+    endwhile
+
+    " More items following.  For each of the possible members find the
+    " matching following members.
+    return s:SearchMembers(matches, a:items[idx :])
+  endif
+
+  " Failed to find anything.
+  return []
+endfunction
+
+" For matching members, find matches for following items.
+function! s:SearchMembers(matches, items)
+  let res = []
+  for i in range(len(a:matches))
+    let typename = ''
+    if has_key(a:matches[i], 'dict')
+      if has_key(a:matches[i].dict, 'typename')
+	let typename = a:matches[i].dict['typename']
+      endif
+      let line = "\t" . a:matches[i].dict['cmd']
+    else
+      let line = a:matches[i]['tagline']
+      let e = matchend(line, '\ttypename:')
+      if e > 0
+	" Use typename field
+	let typename = matchstr(line, '[^\t]*', e)
+      endif
+    endif
+    if typename != ''
+      call extend(res, s:StructMembers(typename, a:items))
+    else
+      " Use the search command (the declaration itself).
+      let s = match(line, '\t\zs/^')
+      if s > 0
+	let e = match(line, '\<' . a:matches[i]['match'] . '\>', s)
+	if e > 0
+	  call extend(res, s:Nextitem(strpart(line, s, e - s), a:items, 0))
+	endif
+      endif
+    endif
+  endfor
+  return res
+endfunc

runtime/autoload/csscomplete.vim

@@ -0,0 +1,430 @@
+" Vim completion script
+" Language:	CSS 2.1
+" Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
+" Last Change:	2005 Oct 12
+
+function! csscomplete#CompleteCSS(findstart, base)
+if a:findstart
+	" We need whole line to proper checking
+    let line = getline('.')
+    let start = col('.') - 1
+	let compl_begin = col('.') - 2
+	while start >= 0 && line[start - 1] =~ '\(\k\|-\)'
+		let start -= 1
+	endwhile
+	let b:compl_context = getline('.')[0:compl_begin]
+	return start
+else
+	" There are few chars important for context:
+	" ^ ; : { } /* */
+	" Where ^ is start of line and /* */ are comment borders
+	" Depending on their relative position to cursor we will now what should
+	" be completed. 
+	" 1. if nearest are ^ or { or ; current word is property
+	" 2. if : it is value (with exception of pseudo things)
+	" 3. if } we are outside of css definitions
+	" 4. for comments ignoring is be the easiest but assume they are the same
+	"    as 1. 
+	" 5. if @ complete at-rule
+	" 6. if ! complete important
+	if exists("b:compl_context")
+		let line = b:compl_context
+		unlet! b:compl_context
+	else
+		let line = a:base
+	endif
+
+	let res = []
+	let res2 = []
+	let borders = {}
+
+	" We need the last occurrence of char so reverse line
+	let revline = join(reverse(split(line, '.\zs')), '')
+
+	let openbrace  = stridx(revline, '{')
+	let closebrace = stridx(revline, '}')
+	let colon      = stridx(revline, ':')
+	let semicolon  = stridx(revline, ';')
+	let opencomm   = stridx(revline, '*/') " Line was reversed
+	let closecomm  = stridx(revline, '/*') " Line was reversed
+	let style      = stridx(revline, '=\s*elyts') " Line was reversed
+	let atrule     = stridx(revline, '@')
+	let exclam     = stridx(revline, '!')
+
+	if openbrace > -1
+		let borders[openbrace] = "openbrace"
+	endif
+	if closebrace > -1
+		let borders[closebrace] = "closebrace"
+	endif
+	if colon > -1
+		let borders[colon] = "colon"
+	endif
+	if semicolon > -1
+		let borders[semicolon] = "semicolon"
+	endif
+	if opencomm > -1
+		let borders[opencomm] = "opencomm"
+	endif
+	if closecomm > -1
+		let borders[closecomm] = "closecomm"
+	endif
+	if style > -1
+		let borders[style] = "style"
+	endif
+	if atrule > -1
+		let borders[atrule] = "atrule"
+	endif
+	if exclam > -1
+		let borders[exclam] = "exclam"
+	endif
+
+
+	if len(borders) == 0 || borders[min(keys(borders))] =~ '^\(openbrace\|semicolon\|opencomm\|closecomm\|style\)$'
+		" Complete properties
+
+		let values = split("azimuth background background-attachment background-color background-image background-position background-repeat border bottom border-collapse border-color border-spacing border-style border-top border-right border-bottom border-left border-top-color border-right-color border-bottom-color border-left-color  border-top-style border-right-style border-bottom-style border-left-style border-top-width border-right-width border-bottom-width border-left-width border-width caption-side clear clip color content counter-increment counter-reset cue cue-after cue-before cursor display direction elevation empty-cells float font font-family font-size font-style font-variant font-weight height left letter-spacing line-height list-style list-style-image list-style-position list-style-type margin margin-right margin-left margin-top margin-bottom max-height max-width min-height min-width orphans outline outline-color outline-style outline-width overflow padding padding-top padding-right padding-bottom padding-left page-break-after page-break-before page-break-inside pause pause-after pause-before pitch pitch-range play-during position quotes right richness speak speak-header speak-numeral speak-punctuation speech-rate stress table-layout text-align text-decoration text-indent text-transform top unicode-bidi vertical-align visibility voice-family volume white-space width widows word-spacing z-index")
+
+		let entered_property = matchstr(line, '.\{-}\zs[a-zA-Z-]*$')
+
+		for m in values
+			if m =~? '^'.entered_property
+				call add(res, m . ':')
+			elseif m =~? entered_property
+				call add(res2, m . ':')
+			endif
+		endfor
+
+		return res + res2
+
+	elseif borders[min(keys(borders))] == 'colon'
+		" Get name of property
+		let prop = tolower(matchstr(line, '\zs[a-zA-Z-]*\ze\s*:[^:]\{-}$'))
+
+		if prop == 'azimuth'
+			let values = ["left-side", "far-left", "left", "center-left", "center", "center-right", "right", "far-right", "right-side", "behind", "leftwards", "rightwards"]
+		elseif prop == 'background-attachment'
+			let values = ["scroll", "fixed"]
+		elseif prop == 'background-color'
+			let values = ["transparent", "rgb(", "#"]
+		elseif prop == 'background-image'
+			let values = ["url(", "none"]
+		elseif prop == 'background-position'
+			let vals = matchstr(line, '.*:\s*\zs.*')
+			if vals =~ '^\([a-zA-Z]\+\)\?$'
+				let values = ["top", "center", "bottom"]
+			elseif vals =~ '^[a-zA-Z]\+\s\+\([a-zA-Z]\+\)\?$'
+				let values = ["left", "center", "right"]
+			else
+				return []
+			endif
+		elseif prop == 'background-repeat'
+			let values = ["repeat", "repeat-x", "repeat-y", "no-repeat"]
+		elseif prop == 'background'
+			let values = ["url(", "scroll", "fixed", "transparent", "rgb(", "#", "none", "top", "center", "bottom" , "left", "right", "repeat", "repeat-x", "repeat-y", "no-repeat"]
+		elseif prop == 'border-collapse'
+			let values = ["collapse", "separate"]
+		elseif prop == 'border-color'
+			let values = ["rgb(", "#", "transparent"]
+		elseif prop == 'border-spacing'
+			return []
+		elseif prop == 'border-style'
+			let values = ["none", "hidden", "dotted", "dashed", "solid", "double", "groove", "ridge", "inset", "outset"]
+		elseif prop =~ 'border-\(top\|right\|bottom\|left\)$'
+			let vals = matchstr(line, '.*:\s*\zs.*')
+			if vals =~ '^\([a-zA-Z0-9.]\+\)\?$'
+				let values = ["thin", "thick", "medium"]
+			elseif vals =~ '^[a-zA-Z0-9.]\+\s\+\([a-zA-Z]\+\)\?$'
+				let values = ["none", "hidden", "dotted", "dashed", "solid", "double", "groove", "ridge", "inset", "outset"]
+			elseif vals =~ '^[a-zA-Z0-9.]\+\s\+[a-zA-Z]\+\s\+\([a-zA-Z(]\+\)\?$'
+				let values = ["rgb(", "#", "transparent"]
+			else
+				return []
+			endif
+		elseif prop =~ 'border-\(top\|right\|bottom\|left\)-color'
+			let values = ["rgb(", "#", "transparent"]
+		elseif prop =~ 'border-\(top\|right\|bottom\|left\)-style'
+			let values = ["none", "hidden", "dotted", "dashed", "solid", "double", "groove", "ridge", "inset", "outset"]
+		elseif prop =~ 'border-\(top\|right\|bottom\|left\)-width'
+			let values = ["thin", "thick", "medium"]
+		elseif prop == 'border-width'
+			let values = ["thin", "thick", "medium"]
+		elseif prop == 'border'
+			let vals = matchstr(line, '.*:\s*\zs.*')
+			if vals =~ '^\([a-zA-Z0-9.]\+\)\?$'
+				let values = ["thin", "thick", "medium"]
+			elseif vals =~ '^[a-zA-Z0-9.]\+\s\+\([a-zA-Z]\+\)\?$'
+				let values = ["none", "hidden", "dotted", "dashed", "solid", "double", "groove", "ridge", "inset", "outset"]
+			elseif vals =~ '^[a-zA-Z0-9.]\+\s\+[a-zA-Z]\+\s\+\([a-zA-Z(]\+\)\?$'
+				let values = ["rgb(", "#", "transparent"]
+			else
+				return []
+			endif
+		elseif prop == 'bottom'
+			let values = ["auto"]
+		elseif prop == 'caption-side'
+			let values = ["top", "bottom"]
+		elseif prop == 'clear'
+			let values = ["none", "left", "right", "both"]
+		elseif prop == 'clip'
+			let values = ["auto", "rect("]
+		elseif prop == 'color'
+			let values = ["rgb(", "#"]
+		elseif prop == 'content'
+			let values = ["normal", "attr(", "open-quote", "close-quote", "no-open-quote", "no-close-quote"]
+		elseif prop =~ 'counter-\(increment\|reset\)$'
+			let values = ["none"]
+		elseif prop =~ '^\(cue-after\|cue-before\|cue\)$'
+			let values = ["url(", "none"]
+		elseif prop == 'cursor'
+			let values = ["url(", "auto", "crosshair", "default", "pointer", "move", "e-resize", "ne-resize", "nw-resize", "n-resize", "se-resize", "sw-resize", "s-resize", "w-resize", "text", "wait", "help", "progress"]
+		elseif prop == 'direction'
+			let values = ["ltr", "rtl"]
+		elseif prop == 'display'
+			let values = ["inline", "block", "list-item", "run-in", "inline-block", "table", "inline-table", "table-row-group", "table-header-group", "table-footer-group", "table-row", "table-column-group", "table-column", "table-cell", "table-caption", "none"]
+		elseif prop == 'elevation'
+			let values = ["below", "level", "above", "higher", "lower"]
+		elseif prop == 'empty-cells'
+			let values = ["show", "hide"]
+		elseif prop == 'float'
+			let values = ["left", "right", "none"]
+		elseif prop == 'font-family'
+			let values = ["sans-serif", "serif", "monospace", "cursive", "fantasy"]
+		elseif prop == 'font-size'
+			 let values = ["xx-small", "x-small", "small", "medium", "large", "x-large", "xx-large", "larger", "smaller"]
+		elseif prop == 'font-style'
+			let values = ["normal", "italic", "oblique"]
+		elseif prop == 'font-variant'
+			let values = ["normal", "small-caps"]
+		elseif prop == 'font-weight'
+			let values = ["normal", "bold", "bolder", "lighter", "100", "200", "300", "400", "500", "600", "700", "800", "900"]
+		elseif prop == 'font'
+			let values = ["normal", "italic", "oblique", "small-caps", "bold", "bolder", "lighter", "100", "200", "300", "400", "500", "600", "700", "800", "900", "xx-small", "x-small", "small", "medium", "large", "x-large", "xx-large", "larger", "smaller", "sans-serif", "serif", "monospace", "cursive", "fantasy", "caption", "icon", "menu", "message-box", "small-caption", "status-bar"]
+		elseif prop =~ '^\(height\|width\)$'
+			let values = ["auto"]
+		elseif prop =~ '^\(left\|rigth\)$'
+			let values = ["auto"]
+		elseif prop == 'letter-spacing'
+			let values = ["normal"]
+		elseif prop == 'line-height'
+			let values = ["normal"]
+		elseif prop == 'list-style-image'
+			let values = ["url(", "none"]
+		elseif prop == 'list-style-position'
+			let values = ["inside", "outside"]
+		elseif prop == 'list-style-type'
+			let values = ["disc", "circle", "square", "decimal", "decimal-leading-zero", "lower-roman", "upper-roman", "lower-latin", "upper-latin", "none"]
+		elseif prop == 'list-style'
+			return []
+		elseif prop == 'margin'
+			let values = ["auto"]
+		elseif prop =~ 'margin-\(right\|left\|top\|bottom\)$'
+			let values = ["auto"]
+		elseif prop == 'max-height'
+			let values = ["auto"]
+		elseif prop == 'max-width'
+			let values = ["none"]
+		elseif prop == 'min-height'
+			let values = ["none"]
+		elseif prop == 'min-width'
+			let values = ["none"]
+		elseif prop == 'orphans'
+			return []
+		elseif prop == 'outline-color'
+			let values = ["rgb(", "#"]
+		elseif prop == 'outline-style'
+			let values = ["none", "hidden", "dotted", "dashed", "solid", "double", "groove", "ridge", "inset", "outset"]
+		elseif prop == 'outline-width'
+			let values = ["thin", "thick", "medium"]
+		elseif prop == 'outline'
+			let vals = matchstr(line, '.*:\s*\zs.*')
+			if vals =~ '^\([a-zA-Z0-9,()#]\+\)\?$'
+				let values = ["rgb(", "#"]
+			elseif vals =~ '^[a-zA-Z0-9,()#]\+\s\+\([a-zA-Z]\+\)\?$'
+				let values = ["none", "hidden", "dotted", "dashed", "solid", "double", "groove", "ridge", "inset", "outset"]
+			elseif vals =~ '^[a-zA-Z0-9,()#]\+\s\+[a-zA-Z]\+\s\+\([a-zA-Z(]\+\)\?$'
+				let values = ["thin", "thick", "medium"]
+			else
+				return []
+			endif
+		elseif prop == 'overflow'
+			let values = ["visible", "hidden", "scroll", "auto"]
+		elseif prop == 'padding'
+			return []
+		elseif prop =~ 'padding-\(top\|right\|bottom\|left\)$'
+			return []
+		elseif prop =~ 'page-break-\(after\|before\)$'
+			let values = ["auto", "always", "avoid", "left", "right"]
+		elseif prop == 'page-break-inside'
+			let values = ["auto", "avoid"]
+		elseif prop =~ 'pause-\(after\|before\)$'
+			return []
+		elseif prop == 'pause'
+			return []
+		elseif prop == 'pitch-range'
+			return []
+		elseif prop == 'pitch'
+			let values = ["x-low", "low", "medium", "high", "x-high"]
+		elseif prop == 'play-during'
+			let values = ["url(", "mix", "repeat", "auto", "none"]
+		elseif prop == 'position'
+			let values = ["static", "relative", "absolute", "fixed"]
+		elseif prop == 'quotes'
+			let values = ["none"]
+		elseif prop == 'richness'
+			return []
+		elseif prop == 'speak-header'
+			let values = ["once", "always"]
+		elseif prop == 'speak-numeral'
+			let values = ["digits", "continuous"]
+		elseif prop == 'speak-punctuation'
+			let values = ["code", "none"]
+		elseif prop == 'speak'
+			let values = ["normal", "none", "spell-out"]
+		elseif prop == 'speech-rate'
+			let values = ["x-slow", "slow", "medium", "fast", "x-fast", "faster", "slower"]
+		elseif prop == 'stress'
+			return []
+		elseif prop == 'table-layout'
+			let values = ["auto", "fixed"]
+		elseif prop == 'text-align'
+			let values = ["left", "right", "center", "justify"]
+		elseif prop == 'text-decoration'
+			let values = ["none", "underline", "overline", "line-through", "blink"]
+		elseif prop == 'text-indent'
+			return []
+		elseif prop == 'text-transform'
+			let values = ["capitalize", "uppercase", "lowercase", "none"]
+		elseif prop == 'top'
+			let values = ["auto"]
+		elseif prop == 'unicode-bidi'
+			let values = ["normal", "embed", "bidi-override"]
+		elseif prop == 'vertical-align'
+			let values = ["baseline", "sub", "super", "top", "text-top", "middle", "bottom", "text-bottom"]
+		elseif prop == 'visibility'
+			let values = ["visible", "hidden", "collapse"]
+		elseif prop == 'voice-family'
+			return []
+		elseif prop == 'volume'
+			let values = ["silent", "x-soft", "soft", "medium", "loud", "x-loud"]
+		elseif prop == 'white-space'
+			let values = ["normal", "pre", "nowrap", "pre-wrap", "pre-line"]
+		elseif prop == 'widows'
+			return []
+		elseif prop == 'word-spacing'
+			let values = ["normal"]
+		elseif prop == 'z-index'
+			let values = ["auto"]
+		else
+			" If no property match it is possible we are outside of {} and
+			" trying to complete pseudo-(class|element)
+			let element = tolower(matchstr(line, '\zs[a-zA-Z1-6]*\ze:[^:[:space:]]\{-}$'))
+			if ",a,abbr,acronym,address,area,b,base,bdo,big,blockquote,body,br,button,caption,cite,code,col,colgroup,dd,del,dfn,div,dl,dt,em,fieldset,form,head,h1,h2,h3,h4,h5,h6,hr,html,i,img,input,ins,kbd,label,legend,li,link,map,meta,noscript,object,ol,optgroup,option,p,param,pre,q,samp,script,select,small,span,strong,style,sub,sup,table,tbody,td,textarea,tfoot,th,thead,title,tr,tt,ul,var," =~ ','.element.','
+				let values = ["first-child", "link", "visited", "hover", "active", "focus", "lang", "first-line", "first-letter", "before", "after"]
+			else
+				return []
+			endif
+		endif
+
+		" Complete values
+		let entered_value = matchstr(line, '.\{-}\zs[a-zA-Z0-9#,.(_-]*$')
+
+		for m in values
+			if m =~? '^'.entered_value
+				call add(res, m)
+			elseif m =~? entered_value
+				call add(res2, m)
+			endif
+		endfor
+
+		return res + res2
+
+	elseif borders[min(keys(borders))] == 'closebrace'
+
+		return []
+
+	elseif borders[min(keys(borders))] == 'exclam'
+
+		" Complete values
+		let entered_imp = matchstr(line, '.\{-}!\s*\zs[a-zA-Z ]*$')
+
+		let values = ["important"]
+
+		for m in values
+			if m =~? '^'.entered_imp
+				call add(res, m)
+			endif
+		endfor
+
+		return res
+
+	elseif borders[min(keys(borders))] == 'atrule'
+
+		let afterat = matchstr(line, '.*@\zs.*')
+
+		if afterat =~ '\s'
+
+			let atrulename = matchstr(line, '.*@\zs[a-zA-Z-]\+\ze')
+
+			if atrulename == 'media'
+				let values = ["screen", "tty", "tv", "projection", "handheld", "print", "braille", "aural", "all"]
+
+				let atruleafterbase = matchstr(line, '.*@media\s\+\ze.*$')
+				let entered_atruleafter = matchstr(line, '.*@media\s\+\zs.*$')
+
+			elseif atrulename == 'import'
+				let atruleafterbase = matchstr(line, '.*@import\s\+\ze.*$')
+				let entered_atruleafter = matchstr(line, '.*@import\s\+\zs.*$')
+
+				if entered_atruleafter =~ "^[\"']"
+					let filestart = matchstr(entered_atruleafter, '^.\zs.*')
+					let files = split(glob(filestart.'*'), '\n')
+					let values = map(copy(files), '"\"".v:val')
+
+				elseif entered_atruleafter =~ "^url("
+					let filestart = matchstr(entered_atruleafter, "^url([\"']\\?\\zs.*")
+					let files = split(glob(filestart.'*'), '\n')
+					let values = map(copy(files), '"url(".v:val')
+					
+				else
+					let values = ['"', 'url(']
+
+				endif
+
+			else
+				return []
+
+			endif
+
+			for m in values
+				if m =~? '^'.entered_atruleafter
+					call add(res, m)
+				elseif m =~? entered_atruleafter
+					call add(res2, m)
+				endif
+			endfor
+
+			return res + res2
+
+		endif
+
+		let values = ["charset", "page", "media", "import", "font-face"]
+
+		let entered_atrule = matchstr(line, '.*@\zs[a-zA-Z-]*$')
+
+		for m in values
+			if m =~? '^'.entered_atrule
+				call add(res, m .' ')
+			elseif m =~? entered_atrule
+				call add(res2, m .' ')
+			endif
+		endfor
+
+		return res + res2
+
+	endif
+
+	return []
+
+	endif
+endfunction

runtime/autoload/gzip.vim

@@ -0,0 +1,173 @@
+" Vim autoload file for editing compressed files.
+" Maintainer: Bram Moolenaar <Bram@vim.org>
+" Last Change: 2005 Jul 26
+
+" These functions are used by the gzip plugin.
+
+" Function to check that executing "cmd [-f]" works.
+" The result is cached in s:have_"cmd" for speed.
+fun s:check(cmd)
+  let name = substitute(a:cmd, '\(\S*\).*', '\1', '')
+  if !exists("s:have_" . name)
+    let e = executable(name)
+    if e < 0
+      let r = system(name . " --version")
+      let e = (r !~ "not found" && r != "")
+    endif
+    exe "let s:have_" . name . "=" . e
+  endif
+  exe "return s:have_" . name
+endfun
+
+" Set b:gzip_comp_arg to the gzip argument to be used for compression, based on
+" the flags in the compressed file.
+" The only compression methods that can be detected are max speed (-1) and max
+" compression (-9).
+fun s:set_compression(line)
+  " get the Compression Method
+  let l:cm = char2nr(a:line[2])
+  " if it's 8 (DEFLATE), we can check for the compression level
+  if l:cm == 8
+    " get the eXtra FLags
+    let l:xfl = char2nr(a:line[8])
+    " max compression
+    if l:xfl == 2
+      let b:gzip_comp_arg = "-9"
+    " min compression
+    elseif l:xfl == 4
+      let b:gzip_comp_arg = "-1"
+    endif
+  endif
+endfun
+
+
+" After reading compressed file: Uncompress text in buffer with "cmd"
+fun gzip#read(cmd)
+  " don't do anything if the cmd is not supported
+  if !s:check(a:cmd)
+    return
+  endif
+
+  " for gzip check current compression level and set b:gzip_comp_arg.
+  silent! unlet b:gzip_comp_arg
+  if a:cmd[0] == 'g'
+    call s:set_compression(getline(1))
+  endif
+
+  " make 'patchmode' empty, we don't want a copy of the written file
+  let pm_save = &pm
+  set pm=
+  " remove 'a' and 'A' from 'cpo' to avoid the alternate file changes
+  let cpo_save = &cpo
+  set cpo-=a cpo-=A
+  " set 'modifiable'
+  let ma_save = &ma
+  setlocal ma
+  " when filtering the whole buffer, it will become empty
+  let empty = line("'[") == 1 && line("']") == line("$")
+  let tmp = tempname()
+  let tmpe = tmp . "." . expand("<afile>:e")
+  " write the just read lines to a temp file "'[,']w tmp.gz"
+  execute "silent '[,']w " . tmpe
+  " uncompress the temp file: call system("gzip -dn tmp.gz")
+  call system(a:cmd . " " . tmpe)
+  if !filereadable(tmp)
+    " uncompress didn't work!  Keep the compressed file then.
+    echoerr "Error: Could not read uncompressed file"
+    return
+  endif
+  " delete the compressed lines; remember the line number
+  let l = line("'[") - 1
+  if exists(":lockmarks")
+    lockmarks '[,']d _
+  else
+    '[,']d _
+  endif
+  " read in the uncompressed lines "'[-1r tmp"
+  setlocal nobin
+  if exists(":lockmarks")
+    execute "silent lockmarks " . l . "r " . tmp
+  else
+    execute "silent " . l . "r " . tmp
+  endif
+
+  " if buffer became empty, delete trailing blank line
+  if empty
+    silent $delete _
+    1
+  endif
+  " delete the temp file and the used buffers
+  call delete(tmp)
+  silent! exe "bwipe " . tmp
+  silent! exe "bwipe " . tmpe
+  let &pm = pm_save
+  let &cpo = cpo_save
+  let &l:ma = ma_save
+  " When uncompressed the whole buffer, do autocommands
+  if empty
+    if &verbose >= 8
+      execute "doau BufReadPost " . expand("%:r")
+    else
+      execute "silent! doau BufReadPost " . expand("%:r")
+    endif
+  endif
+endfun
+
+" After writing compressed file: Compress written file with "cmd"
+fun gzip#write(cmd)
+  " don't do anything if the cmd is not supported
+  if s:check(a:cmd)
+    " Rename the file before compressing it.
+    let nm = resolve(expand("<afile>"))
+    let nmt = s:tempname(nm)
+    if rename(nm, nmt) == 0
+      if exists("b:gzip_comp_arg")
+	call system(a:cmd . " " . b:gzip_comp_arg . " " . nmt)
+      else
+	call system(a:cmd . " " . nmt)
+      endif
+      call rename(nmt . "." . expand("<afile>:e"), nm)
+    endif
+  endif
+endfun
+
+" Before appending to compressed file: Uncompress file with "cmd"
+fun gzip#appre(cmd)
+  " don't do anything if the cmd is not supported
+  if s:check(a:cmd)
+    let nm = expand("<afile>")
+
+    " for gzip check current compression level and set b:gzip_comp_arg.
+    silent! unlet b:gzip_comp_arg
+    if a:cmd[0] == 'g'
+      call s:set_compression(readfile(nm, "b", 1)[0])
+    endif
+
+    " Rename to a weird name to avoid the risk of overwriting another file
+    let nmt = expand("<afile>:p:h") . "/X~=@l9q5"
+    let nmte = nmt . "." . expand("<afile>:e")
+    if rename(nm, nmte) == 0
+      if &patchmode != "" && getfsize(nm . &patchmode) == -1
+	" Create patchmode file by creating the decompressed file new
+	call system(a:cmd . " -c " . nmte . " > " . nmt)
+	call rename(nmte, nm . &patchmode)
+      else
+	call system(a:cmd . " " . nmte)
+      endif
+      call rename(nmt, nm)
+    endif
+  endif
+endfun
+
+" find a file name for the file to be compressed.  Use "name" without an
+" extension if possible.  Otherwise use a weird name to avoid overwriting an
+" existing file.
+fun s:tempname(name)
+  let fn = fnamemodify(a:name, ":r")
+  if !filereadable(fn) && !isdirectory(fn)
+    return fn
+  endif
+  return fnamemodify(a:name, ":p:h") . "/X~=@l9q5"
+endfun
+
+" vim: set sw=2 :

runtime/autoload/htmlcomplete.vim

@@ -0,0 +1,594 @@
+" Vim completion script
+" Language:	XHTML 1.0 Strict
+" Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
+" Last Change:	2006 Feb 18
+
+function! htmlcomplete#CompleteTags(findstart, base)
+  if a:findstart
+    " locate the start of the word
+    let line = getline('.')
+    let start = col('.') - 1
+	let curline = line('.')
+	let compl_begin = col('.') - 2
+    while start >= 0 && line[start - 1] =~ '\(\k\|[:.-]\)'
+		let start -= 1
+    endwhile
+	" Handling of entities {{{
+	if start >= 0 && line[start - 1] =~ '&'
+		let b:entitiescompl = 1
+		let b:compl_context = ''
+		return start
+	endif
+	" }}}
+	" Handling of <style> tag {{{
+	let stylestart = searchpair('<style\>', '', '<\/style\>', "bnW")
+	let styleend   = searchpair('<style\>', '', '<\/style\>', "nW")
+	if stylestart != 0 && styleend != 0 
+		if stylestart <= curline && styleend >= curline
+			let start = col('.') - 1
+			let b:csscompl = 1
+			while start >= 0 && line[start - 1] =~ '\(\k\|-\)'
+				let start -= 1
+			endwhile
+		endif
+	endif
+	" }}}
+	" Handling of <script> tag {{{
+	let scriptstart = searchpair('<script\>', '', '<\/script\>', "bnW")
+	let scriptend   = searchpair('<script\>', '', '<\/script\>', "nW")
+	if scriptstart != 0 && scriptend != 0 
+		if scriptstart <= curline && scriptend >= curline
+			let start = col('.') - 1
+			let b:jscompl = 1
+			let b:jsrange = [scriptstart, scriptend]
+			while start >= 0 && line[start - 1] =~ '\k'
+				let start -= 1
+			endwhile
+			" We are inside of <script> tag. But we should also get contents
+			" of all linked external files and (secondary, less probably) other <script> tags
+			" This logic could possible be done in separate function - may be
+			" reused in events scripting (also with option could be reused for
+			" CSS
+			let b:js_extfiles = []
+			let l = line('.')
+			let c = col('.')
+			call cursor(1,1)
+			while search('<\@<=script\>', 'W') && line('.') <= l
+				if synIDattr(synID(line('.'),col('.')-1,0),"name") !~? 'comment'
+					let sname = matchstr(getline('.'), '<script[^>]*src\s*=\s*\([''"]\)\zs.\{-}\ze\1')
+					if filereadable(sname)
+						let b:js_extfiles += readfile(sname)
+					endif
+				endif
+			endwhile
+			call cursor(1,1)
+			let js_scripttags = []
+			while search('<script\>', 'W') && line('.') < l
+				if matchstr(getline('.'), '<script[^>]*src') == ''
+					let js_scripttag = getline(line('.'), search('</script>', 'W'))
+					let js_scripttags += js_scripttag
+				endif
+			endwhile
+			let b:js_extfiles += js_scripttags
+			call cursor(l,c)
+			unlet! l c
+		endif
+	endif
+	" }}}
+	if !exists("b:csscompl") && !exists("b:jscompl")
+		let b:compl_context = getline('.')[0:(compl_begin)]
+		if b:compl_context !~ '<[^>]*$'
+			" Look like we may have broken tag. Check previous lines.
+			let i = 1
+			while 1
+				let context_line = getline(curline-i)
+				if context_line =~ '<[^>]*$'
+					" Yep, this is this line
+					let context_lines = getline(curline-i, curline)
+					let b:compl_context = join(context_lines, ' ')
+					break
+				elseif context_line =~ '>[^<]*$'
+					" Normal tag line, no need for completion at all
+					let b:compl_context = ''
+					break
+				endif
+				let i += 1
+			endwhile
+			" Make sure we don't have counter
+			unlet! i
+		endif
+		let b:compl_context = matchstr(b:compl_context, '.*\zs<.*')
+		" Return proper start for on-events. Without that beginning of
+		" completion will be badly reported
+		if b:compl_context =~? 'on[a-z]*\s*=\s*\(''[^'']*\|"[^"]*\)$'
+			let start = col('.') - 1
+			while start >= 0 && line[start - 1] =~ '\k'
+				let start -= 1
+			endwhile
+		endif
+	else
+		let b:compl_context = getline('.')[0:compl_begin]
+	endif
+    return start
+  else
+	" Initialize base return lists
+    let res = []
+    let res2 = []
+	" a:base is very short - we need context
+	let context = b:compl_context
+	" Check if we should do CSS completion inside of <style> tag
+	" or JS completion inside of <script> tag
+	if exists("b:csscompl")
+		unlet! b:csscompl
+		let context = b:compl_context
+		unlet! b:compl_context
+		return csscomplete#CompleteCSS(0, context)
+	elseif exists("b:jscompl")
+		unlet! b:jscompl
+		return javascriptcomplete#CompleteJS(0, a:base)
+	else
+		if len(b:compl_context) == 0 && !exists("b:entitiescompl")
+			return []
+		endif
+		let context = matchstr(b:compl_context, '.\zs.*')
+	endif
+	unlet! b:compl_context
+	" Entities completion {{{
+	if exists("b:entitiescompl")
+		unlet! b:entitiescompl
+
+		if !exists("g:xmldata_xhtml10s")
+			runtime! autoload/xml/xhtml10s.vim
+		endif
+
+	    let entities =  g:xmldata_xhtml10s['vimxmlentities']
+
+		if len(a:base) == 1
+			for m in entities
+				if m =~ '^'.a:base
+					call add(res, m.';')
+				endif
+			endfor
+			return res
+		else
+			for m in entities
+				if m =~? '^'.a:base
+					call add(res, m.';')
+				elseif m =~? a:base
+					call add(res2, m.';')
+				endif
+			endfor
+
+			return res + res2
+		endif
+
+
+	endif
+	" }}}
+	if context =~ '>'
+		" Generally if context contains > it means we are outside of tag and
+		" should abandon action - with one exception: <style> span { bo
+		if context =~ 'style[^>]\{-}>[^<]\{-}$'
+			return csscomplete#CompleteCSS(0, context)
+		elseif context =~ 'script[^>]\{-}>[^<]\{-}$'
+			let b:jsrange = [line('.'), search('<\/script\>', 'nW')]
+			return javascriptcomplete#CompleteJS(0, context)
+		else
+			return []
+		endif
+	endif
+
+	" If context contains > it means we are already outside of tag and we
+	" should abandon action
+	" If context contains white space it is attribute. 
+	" It can be also value of attribute.
+	" We have to get first word to offer proper completions
+	if context == ''
+		let tag = ''
+	else
+		let tag = split(context)[0]
+	endif
+	" Get last word, it should be attr name
+	let attr = matchstr(context, '.*\s\zs.*')
+	" Possible situations where any prediction would be difficult:
+	" 1. Events attributes
+	if context =~ '\s'
+		" Sort out style, class, and on* cases
+		if context =~? "\\(on[a-z]*\\|id\\|style\\|class\\)\\s*=\\s*[\"']"
+			" Id, class completion {{{
+			if context =~? "\\(id\\|class\\)\\s*=\\s*[\"'][a-zA-Z0-9_ -]*$"
+				if context =~? "class\\s*=\\s*[\"'][a-zA-Z0-9_ -]*$"
+					let search_for = "class"
+				elseif context =~? "id\\s*=\\s*[\"'][a-zA-Z0-9_ -]*$"
+					let search_for = "id"
+				endif
+				" Handle class name completion
+				" 1. Find lines of <link stylesheet>
+				" 1a. Check file for @import
+				" 2. Extract filename(s?) of stylesheet,
+				call cursor(1,1)
+				let head = getline(search('<head\>'), search('<\/head>'))
+				let headjoined = join(copy(head), ' ')
+				if headjoined =~ '<style'
+					" Remove possibly confusing CSS operators
+					let stylehead = substitute(headjoined, '+>\*[,', ' ', 'g')
+					if search_for == 'class'
+						let styleheadlines = split(stylehead)
+						let headclasslines = filter(copy(styleheadlines), "v:val =~ '\\([a-zA-Z0-9:]\\+\\)\\?\\.[a-zA-Z0-9_-]\\+'")
+					else
+						let stylesheet = split(headjoined, '[{}]')
+						" Get all lines which fit id syntax
+						let classlines = filter(copy(stylesheet), "v:val =~ '#[a-zA-Z0-9_-]\\+'")
+						" Filter out possible color definitions
+						call filter(classlines, "v:val !~ ':\\s*#[a-zA-Z0-9_-]\\+'")
+						" Filter out complex border definitions
+						call filter(classlines, "v:val !~ '\\(none\\|hidden\\|dotted\\|dashed\\|solid\\|double\\|groove\\|ridge\\|inset\\|outset\\)\\s*#[a-zA-Z0-9_-]\\+'")
+						let templines = join(classlines, ' ')
+						let headclasslines = split(templines)
+						call filter(headclasslines, "v:val =~ '#[a-zA-Z0-9_-]\\+'")
+					endif
+					let internal = 1
+				else
+					let internal = 0
+				endif
+				let styletable = []
+				let secimportfiles = []
+				let filestable = filter(copy(head), "v:val =~ '\\(@import\\|link.*stylesheet\\)'")
+				for line in filestable
+					if line =~ "@import"
+						let styletable += [matchstr(line, "import\\s\\+\\(url(\\)\\?[\"']\\?\\zs\\f\\+\\ze")]
+					elseif line =~ "<link"
+						let styletable += [matchstr(line, "href\\s*=\\s*[\"']\\zs\\f\\+\\ze")]
+					endif
+				endfor
+				for file in styletable
+					if filereadable(file)
+						let stylesheet = readfile(file)
+						let secimport = filter(copy(stylesheet), "v:val =~ '@import'")
+						if len(secimport) > 0
+							for line in secimport
+								let secfile = matchstr(line, "import\\s\\+\\(url(\\)\\?[\"']\\?\\zs\\f\\+\\ze")
+								let secfile = fnamemodify(file, ":p:h").'/'.secfile
+								let secimportfiles += [secfile]
+							endfor
+						endif
+					endif
+				endfor
+				let cssfiles = styletable + secimportfiles
+				let classes = []
+				for file in cssfiles
+					if filereadable(file)
+						let stylesheet = readfile(file)
+						let stylefile = join(stylesheet, ' ')
+						let stylefile = substitute(stylefile, '+>\*[,', ' ', 'g')
+						if search_for == 'class'
+							let stylesheet = split(stylefile)
+							let classlines = filter(copy(stylesheet), "v:val =~ '\\([a-zA-Z0-9:]\\+\\)\\?\\.[a-zA-Z0-9_-]\\+'")
+						else
+							let stylesheet = split(stylefile, '[{}]')
+							" Get all lines which fit id syntax
+							let classlines = filter(copy(stylesheet), "v:val =~ '#[a-zA-Z0-9_-]\\+'")
+							" Filter out possible color definitions
+							call filter(classlines, "v:val !~ ':\\s*#[a-zA-Z0-9_-]\\+'")
+							" Filter out complex border definitions
+							call filter(classlines, "v:val !~ '\\(none\\|hidden\\|dotted\\|dashed\\|solid\\|double\\|groove\\|ridge\\|inset\\|outset\\)\\s*#[a-zA-Z0-9_-]\\+'")
+							let templines = join(classlines, ' ')
+							let stylelines = split(templines)
+							let classlines = filter(stylelines, "v:val =~ '#[a-zA-Z0-9_-]\\+'")
+
+						endif
+					endif
+					" We gathered classes definitions from all external files
+					let classes += classlines
+				endfor
+				if internal == 1
+					let classes += headclasslines
+				endif
+
+				if search_for == 'class'
+					let elements = {}
+					for element in classes
+						if element =~ '^\.'
+							let class = matchstr(element, '^\.\zs[a-zA-Z][a-zA-Z0-9_-]*\ze')
+							let class = substitute(class, ':.*', '', '')
+							if has_key(elements, 'common')
+								let elements['common'] .= ' '.class
+							else
+								let elements['common'] = class
+							endif
+						else
+							let class = matchstr(element, '[a-zA-Z1-6]*\.\zs[a-zA-Z][a-zA-Z0-9_-]*\ze')
+							let tagname = tolower(matchstr(element, '[a-zA-Z1-6]*\ze.'))
+							if tagname != ''
+								if has_key(elements, tagname)
+									let elements[tagname] .= ' '.class
+								else
+									let elements[tagname] = class
+								endif
+							endif
+						endif
+					endfor
+
+					if has_key(elements, tag) && has_key(elements, 'common')
+						let values = split(elements[tag]." ".elements['common'])
+					elseif has_key(elements, tag) && !has_key(elements, 'common')
+						let values = split(elements[tag])
+					elseif !has_key(elements, tag) && has_key(elements, 'common')
+						let values = split(elements['common'])
+					else
+						return []
+					endif
+
+				elseif search_for == 'id'
+					" Find used IDs
+					" 1. Catch whole file
+					let filelines = getline(1, line('$'))
+					" 2. Find lines with possible id
+					let used_id_lines = filter(filelines, 'v:val =~ "id\\s*=\\s*[\"''][a-zA-Z0-9_-]\\+"')
+					" 3a. Join all filtered lines 
+					let id_string = join(used_id_lines, ' ')
+					" 3b. And split them to be sure each id is in separate item
+					let id_list = split(id_string, 'id\s*=\s*')
+					" 4. Extract id values
+					let used_id = map(id_list, 'matchstr(v:val, "[\"'']\\zs[a-zA-Z0-9_-]\\+\\ze")')
+					let joined_used_id = ','.join(used_id, ',').','
+
+					let allvalues = map(classes, 'matchstr(v:val, ".*#\\zs[a-zA-Z0-9_-]\\+")')
+
+					let values = []
+
+					for element in classes
+						if joined_used_id !~ ','.element.','
+							let values += [element]
+						endif
+
+					endfor
+
+				endif
+
+				" We need special version of sbase
+				let classbase = matchstr(context, ".*[\"']")
+				let classquote = matchstr(classbase, '.$')
+
+				let entered_class = matchstr(attr, ".*=\\s*[\"']\\zs.*")
+
+				for m in sort(values)
+					if m =~? '^'.entered_class
+						call add(res, m . classquote)
+					elseif m =~? entered_class
+						call add(res2, m . classquote)
+					endif
+				endfor
+
+				return res + res2
+
+			elseif context =~? "style\\s*=\\s*[\"'][^\"']*$"
+				return csscomplete#CompleteCSS(0, context)
+
+			endif
+			" }}}
+			" Complete on-events {{{
+			if context =~? 'on[a-z]*\s*=\s*\(''[^'']*\|"[^"]*\)$'
+				" We have to:
+				" 1. Find external files
+				let b:js_extfiles = []
+				let l = line('.')
+				let c = col('.')
+				call cursor(1,1)
+				while search('<\@<=script\>', 'W') && line('.') <= l
+					if synIDattr(synID(line('.'),col('.')-1,0),"name") !~? 'comment'
+						let sname = matchstr(getline('.'), '<script[^>]*src\s*=\s*\([''"]\)\zs.\{-}\ze\1')
+						if filereadable(sname)
+							let b:js_extfiles += readfile(sname)
+						endif
+					endif
+				endwhile
+				" 2. Find at least one <script> tag
+				call cursor(1,1)
+				let js_scripttags = []
+				while search('<script\>', 'W') && line('.') < l
+					if matchstr(getline('.'), '<script[^>]*src') == ''
+						let js_scripttag = getline(line('.'), search('</script>', 'W'))
+						let js_scripttags += js_scripttag
+					endif
+				endwhile
+				let b:js_extfiles += js_scripttags
+
+				" 3. Proper call for javascriptcomplete#CompleteJS
+				call cursor(l,c)
+				let js_context = matchstr(a:base, '\k\+$')
+				let js_shortcontext = substitute(a:base, js_context.'$', '', '')
+				let b:compl_context = context
+				let b:jsrange = [l, l]
+				unlet! l c
+				return javascriptcomplete#CompleteJS(0, js_context)
+
+			endif
+				
+			" }}}
+			let stripbase = matchstr(context, ".*\\(on[a-zA-Z]*\\|style\\|class\\)\\s*=\\s*[\"']\\zs.*")
+			" Now we have context stripped from all chars up to style/class.
+			" It may fail with some strange style value combinations.
+			if stripbase !~ "[\"']"
+				return []
+			endif
+		endif
+		" Value of attribute completion {{{
+		" If attr contains =\s*[\"'] we catched value of attribute
+		if attr =~ "=\s*[\"']"
+			" Let do attribute specific completion
+			let attrname = matchstr(attr, '.*\ze\s*=')
+			let entered_value = matchstr(attr, ".*=\\s*[\"']\\zs.*")
+			let values = []
+			if attrname == 'media'
+				let values = ["screen", "tty", "tv", "projection", "handheld", "print", "braille", "aural", "all"]
+			elseif attrname == 'xml:space'
+				let values = ["preserve"]
+			elseif attrname == 'shape'
+				let values = ["rect", "circle", "poly", "default"]
+			elseif attrname == 'valuetype'
+				let values = ["data", "ref", "object"]
+			elseif attrname == 'method'
+				let values = ["get", "post"]
+			elseif attrname == 'dir'
+				let values = ["ltr", "rtl"]
+			elseif attrname == 'frame'
+				let values = ["void", "above", "below", "hsides", "lhs", "rhs", "vsides", "box", "border"]
+			elseif attrname == 'rules'
+				let values = ["none", "groups", "rows", "all"]
+			elseif attrname == 'align'
+				let values = ["left", "center", "right", "justify", "char"]
+			elseif attrname == 'valign'
+				let values = ["top", "middle", "bottom", "baseline"]
+			elseif attrname == 'scope'
+				let values = ["row", "col", "rowgroup", "colgroup"]
+			elseif attrname == 'href'
+				" Now we are looking for local anchors defined by name or id
+				if entered_value =~ '^#'
+					let file = join(getline(1, line('$')), ' ')
+					" Split it be sure there will be one id/name element in
+					" item, it will be also first word [a-zA-Z0-9_-] in element
+					let oneelement = split(file, "\\(meta \\)\\@<!\\(name\\|id\\)\\s*=\\s*[\"']")
+					for i in oneelement
+						let values += ['#'.matchstr(i, "^[a-zA-Z][a-zA-Z0-9%_-]*")]
+					endfor
+				endif
+			elseif attrname == 'type'
+				if context =~ '^input'
+					let values = ["text", "password", "checkbox", "radio", "submit", "reset", "file", "hidden", "image", "button"]
+				elseif context =~ '^button'
+					let values = ["button", "submit", "reset"]
+				elseif context =~ '^style'
+					let values = ["text/css"]
+				elseif context =~ '^script'
+					let values = ["text/javascript"]
+				endif
+			else
+				return []
+			endif
+
+			if len(values) == 0
+				return []
+			endif
+
+			" We need special version of sbase
+			let attrbase = matchstr(context, ".*[\"']")
+			let attrquote = matchstr(attrbase, '.$')
+
+			for m in values
+				" This if is needed to not offer all completions as-is
+				" alphabetically but sort them. Those beginning with entered
+				" part will be as first choices
+				if m =~ '^'.entered_value
+					call add(res, m . attrquote.' ')
+				elseif m =~ entered_value
+					call add(res2, m . attrquote.' ')
+				endif
+			endfor
+
+			return res + res2
+
+		endif
+		" }}}
+		" Attribute completion {{{
+		" Shorten context to not include last word
+		let sbase = matchstr(context, '.*\ze\s.*')
+
+		" Load data {{{
+		if !exists("g:xmldata_xhtml10s")
+			runtime! autoload/xml/xhtml10s.vim
+		endif
+		" }}}
+		"
+		let attrs = keys(g:xmldata_xhtml10s[tag][1])
+
+		for m in sort(attrs)
+			if m =~ '^'.attr
+				call add(res, m)
+			elseif m =~ attr
+				call add(res2, m)
+			endif
+		endfor
+		let menu = res + res2
+		if has_key(g:xmldata_xhtml10s, 'vimxmlattrinfo')
+			let final_menu = []
+			for i in range(len(menu))
+				let item = menu[i]
+				if has_key(g:xmldata_xhtml10s['vimxmlattrinfo'], item)
+					let m_menu = g:xmldata_xhtml10s['vimxmlattrinfo'][item][0]
+					let m_info = g:xmldata_xhtml10s['vimxmlattrinfo'][item][1]
+					if m_menu !~ 'Bool'
+						let item .= '="'
+					endif
+				else
+					let m_menu = ''
+					let m_info = ''
+					let item .= '="'
+				endif
+				let final_menu += [{'word':item, 'menu':m_menu, 'info':m_info}]
+			endfor
+		else
+			let final_menu = map(menu, 'v:val."=\""')
+		endif
+		return final_menu
+
+	endif
+	" }}}
+	" Close tag {{{
+	let b:unaryTagsStack = "base meta link hr br param img area input col"
+	if context =~ '^\/'
+		let opentag = xmlcomplete#GetLastOpenTag("b:unaryTagsStack")
+		return [opentag.">"]
+	endif
+	" Load data {{{
+	if !exists("g:xmldata_xhtml10s")
+		runtime! autoload/xml/xhtml10s.vim
+	endif
+	" }}}
+	" Tag completion {{{
+	" Deal with tag completion.
+	let opentag = xmlcomplete#GetLastOpenTag("b:unaryTagsStack")
+	if opentag == ''
+		" Hack for sometimes failing GetLastOpenTag.
+		" As far as I tested fail isn't GLOT fault but problem
+		" of invalid document - not properly closed tags and other mish-mash.
+		" Also when document is empty. Return list of *all* tags.
+	    let tags = keys(g:xmldata_xhtml10s)
+		call filter(tags, 'v:val !~ "^vimxml"')
+	else
+		let tags = g:xmldata_xhtml10s[opentag][0]
+	endif
+	" }}}
+
+
+	for m in sort(tags)
+		if m =~ '^'.context
+			call add(res, m)
+		elseif m =~ context
+			call add(res2, m)
+		endif
+	endfor
+	let menu = res + res2
+	if has_key(g:xmldata_xhtml10s, 'vimxmltaginfo')
+		let final_menu = []
+		for i in range(len(menu))
+			let item = menu[i]
+			if has_key(g:xmldata_xhtml10s['vimxmltaginfo'], item)
+				let m_menu = g:xmldata_xhtml10s['vimxmltaginfo'][item][0]
+				let m_info = g:xmldata_xhtml10s['vimxmltaginfo'][item][1]
+			else
+				let m_menu = ''
+				let m_info = ''
+			endif
+			let final_menu += [{'word':item, 'menu':m_menu, 'info':m_info}]
+		endfor
+	else
+		let final_menu = menu
+	endif
+	return final_menu
+
+
+	" }}}
+  endif
+endfunction
+" vim:set foldmethod=marker:

runtime/autoload/javascriptcomplete.vim

@@ -0,0 +1,625 @@
+" Vim completion script
+" Language:	Java Script
+" Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
+" Last Change:	2006 Feb 6
+
+function! javascriptcomplete#CompleteJS(findstart, base)
+  if a:findstart
+	" locate the start of the word
+	let line = getline('.')
+	let start = col('.') - 1
+	let curline = line('.')
+	let compl_begin = col('.') - 2
+	" Bit risky but JS is rather limited language and local chars shouldn't
+	" fint way into names
+	while start >= 0 && line[start - 1] =~ '\k'
+		let start -= 1
+	endwhile
+	let b:compl_context = getline('.')[0:compl_begin]
+	return start
+  else
+	" Initialize base return lists
+	let res = []
+	let res2 = []
+	" a:base is very short - we need context
+	" Shortcontext is context without a:base, useful for checking if we are
+	" looking for objects and for what objects we are looking for
+	let context = b:compl_context
+	let shortcontext = substitute(context, a:base.'$', '', '')
+	unlet! b:compl_context
+
+	if exists("b:jsrange")
+		let file = getline(b:jsrange[0],b:jsrange[1])
+		unlet! b:jsrange
+
+		if len(b:js_extfiles) > 0
+			let file = b:js_extfiles + file
+		endif
+
+	else
+		let file = getline(1, '$')
+	endif
+
+
+	" Completion of properties, methods, etc. {{{
+	if shortcontext =~ '\.$'
+		" Complete methods and properties for objects
+		" DOM separate
+		let doms = ['style.']
+		" Arrays
+		let arrayprop = ['constructor', 'index', 'input', 'length', 'prototype']
+		let arraymeth = ['concat', 'join', 'pop', 'push', 'reverse', 'shift', 
+					\ 'splice', 'sort', 'toSource', 'toString', 'unshift', 'valueOf',
+					\ 'watch', 'unwatch']
+		call map(arraymeth, 'v:val."("')
+		let arrays = arrayprop + arraymeth
+
+		" Boolean - complete subset of array values
+		" properties - constructor, prototype
+		" methods    - toSource, toString, valueOf
+
+		" Date
+		" properties - constructor, prototype
+		let datemeth = ['getDate', 'getDay', 'getFullYear', 'getHours', 'getMilliseconds',
+					\ 'getMinutes', 'getMonth', 'getSeconds', 'getTime', 'getTimezoneOffset',
+					\ 'getUTCDate', 'getUTCDay', 'getUTCFullYear', 'getUTCHours', 'getUTCMilliseconds',
+					\ 'getUTCMinutes', 'getUTCMonth', 'getUTCSeconds',
+					\ 'getYear', 'parse', 'parse',
+					\ 'setDate', 'setDay', 'setFullYear', 'setHours', 'setMilliseconds',
+					\ 'setMinutes', 'setMonth', 'setSeconds',
+					\ 'setUTCDate', 'setUTCDay', 'setUTCFullYear', 'setUTCHours', 'setUTCMilliseconds',
+					\ 'setUTCMinutes', 'setUTCMonth', 'setUTCSeconds', 'setYear', 'setTime',
+					\ 'toGMTString', 'toLocaleString', 'toLocaleDateString', 'toLocaleTimeString',
+					\ 'toSource', 'toString', 'toUTCString', 'UTC', 'valueOf', 'watch', 'unwatch']
+		call map(datemeth, 'v:val."("')
+		let dates = datemeth
+
+		" Function
+		let funcprop = ['arguments', 'arguments.callee', 'arguments.caller', 'arguments.length',
+					\ 'arity', 'constructor', 'length', 'prototype']
+		let funcmeth = ['apply', 'call', 'toSource', 'toString', 'valueOf']
+		call map(funcmeth, 'v:val."("')
+		let funcs = funcprop + funcmeth
+
+		" Math
+		let mathprop = ['E', 'LN2', 'LN10', 'LOG2E', 'LOG10E', 'PI', 'SQRT1_2', 'SQRT']
+		let mathmeth = ['abs', 'acos', 'asin', 'atan', 'atan2', 'ceil', 'cos', 'exp', 'floor',
+					\ 'log', 'max', 'min', 'pow', 'random', 'round', 'sin', 'sqrt', 'tan',
+					\ 'watch', 'unwatch']
+		call map(mathmeth, 'v:val."("')
+		let maths = mathprop + mathmeth
+
+		" Number
+		let numbprop = ['MAX_VALUE', 'MIN_VALUE', 'NaN', 'NEGATIVE_INFINITY', 'POSITIVE_INFINITY', 
+					\ 'constructor', 'prototype']
+		let numbmeth = ['toExponential', 'toFixed', 'toPrecision', 'toSource', 'toString', 'valueOf',
+					\ 'watch', 'unwatch']
+		call map(numbmeth, 'v:val."("')
+		let numbs = numbprop + numbmeth
+
+		" Object
+		let objeprop = ['constructor', 'prototype']
+		let objemeth = ['eval', 'toSource', 'toString', 'unwatch', 'watch', 'valueOf']
+		call map(objemeth, 'v:val."("')
+		let objes = objeprop + objemeth
+
+		" RegExp
+		let regeprop = ['constructor', 'global', 'ignoreCase', 'lastIndex', 'multiline', 'source', 'prototype']
+		let regemeth = ['exec', 'test', 'toSource', 'toString', 'watch', 'unwatch']
+		call map(regemeth, 'v:val."("')
+		let reges = regeprop + regemeth
+
+		" String
+		let striprop = ['constructor', 'length', 'prototype']
+		let strimeth = ['anchor', 'big', 'blink', 'bold', 'charAt', 'charCodeAt', 'concat',
+					\ 'fixed', 'fontcolor', 'fontsize', 'fromCharCode', 'indexOf', 'italics',
+					\ 'lastIndexOf', 'link', 'match', 'replace', 'search', 'slice', 'small',
+					\ 'split', 'strike', 'sub', 'substr', 'substring', 'sup', 'toLowerCase',
+					\ 'toSource', 'toString', 'toUpperCase', 'watch', 'unwatch']
+		call map(strimeth, 'v:val."("')
+		let stris = striprop + strimeth
+
+		" User created properties
+		let user_props1 = filter(copy(file), 'v:val =~ "this\\.\\k"')
+		let juser_props1 = join(user_props1, ' ')
+		let user_props1 = split(juser_props1, '\zethis\.')
+		unlet! juser_props1
+		call map(user_props1, 'matchstr(v:val, "this\\.\\zs\\k\\+\\ze")')
+
+		let user_props2 = filter(copy(file), 'v:val =~ "\\.prototype\\.\\k"')
+		let juser_props2 = join(user_props2, ' ')
+		let user_props2 = split(juser_props2, '\zeprototype\.')
+		unlet! juser_props2
+		call map(user_props2, 'matchstr(v:val, "prototype\\.\\zs\\k\\+\\ze")')
+		let user_props = user_props1 + user_props2
+
+		" HTML DOM properties
+		" Anchors - anchor.
+		let anchprop = ['accessKey', 'charset', 'coords', 'href', 'hreflang', 'id', 'innerHTML',
+					\ 'name', 'rel', 'rev', 'shape', 'tabIndex', 'target', 'type', 'onBlur', 'onFocus']
+		let anchmeth = ['blur', 'focus']
+		call map(anchmeth, 'v:val."("')
+		let anths = anchprop + anchmeth
+		" Area - area.
+		let areaprop = ['accessKey', 'alt', 'coords', 'hash', 'host', 'hostname', 'href', 'id',
+					\ 'noHref', 'pathname', 'port', 'protocol', 'search', 'shape', 'tabIndex', 'target']
+		let areameth = ['onClick', 'onDblClick', 'onMouseOut', 'onMouseOver']
+		call map(areameth, 'v:val."("')
+		let areas = areaprop + areameth
+		" Base - base.
+		let baseprop = ['href', 'id', 'target']
+		let bases = baseprop
+		" Body - body.
+		let bodyprop = ['aLink', 'background', 'gbColor', 'id', 'link', 'scrollLeft', 'scrollTop',
+					\ 'text', 'vLink']
+		let bodys = bodyprop
+		" Document - document.
+		let docuprop = ['anchors', 'applets', 'childNodes', 'embeds', 'forms', 'images', 'links', 'stylesheets',
+					\ 'body', 'cookie', 'documentElement', 'domain', 'lastModified', 'referrer', 'title', 'URL']
+		let documeth = ['close', 'createAttribute', 'createElement', 'createTextNode', 'focus', 'getElementById',
+					\ 'getElementsByName', 'getElementsByTagName', 'open', 'write', 'writeln',
+					\ 'onClick', 'onDblClick', 'onFocus', 'onKeyDown', 'onKeyPress', 'onKeyUp',
+					\ 'onMouseDown', 'onMouseMove', 'onMouseOut', 'onMouseOver', 'onMouseUp', 'onResize']
+		call map(documeth, 'v:val."("')
+		let docuxprop = ['attributes', 'childNodes', 'doctype', 'documentElement', 'firstChild',
+					\ 'implementation', 'namespaceURI', 'nextSibling', 'nodeName', 'nodeType',
+					\ 'nodeValue', 'ownerDocument', 'parentNode', 'previousSibling']
+		let docuxmeth = ['createAttribute', 'createCDATASection',
+					\ 'createComment', 'createDocument', 'createDocumentFragment',
+					\ 'createElement', 'createEntityReference', 'createProcessingInstruction',
+					\ 'createTextNode']
+		call map(docuxmeth, 'v:val."("')
+		let docus = docuprop + docuxprop + documeth + docuxmeth
+		" Form - form.
+		let formprop = ['elements', 'acceptCharset', 'action', 'encoding', 'enctype', 'id', 'length',
+					\ 'method', 'name', 'tabIndex', 'target']
+		let formmeth = ['reset', 'submit', 'onReset', 'onSubmit']
+		call map(formmeth, 'v:val."("')
+		let forms = formprop + formmeth
+		" Frame - frame.
+		let framprop = ['contentDocument', 'frameBorder', 'id', 'longDesc', 'marginHeight', 'marginWidth',
+					\ 'name', 'noResize', 'scrolling', 'src']
+		let frammeth = ['blur', 'focus']
+		call map(frammeth, 'v:val."("')
+		let frams = framprop + frammeth
+		" Frameset - frameset.
+		let fsetprop = ['cols', 'id', 'rows']
+		let fsetmeth = ['blur', 'focus']
+		call map(fsetmeth, 'v:val."("')
+		let fsets = fsetprop + fsetmeth
+		" History - history.
+		let histprop = ['length']
+		let histmeth = ['back', 'forward', 'go']
+		call map(histmeth, 'v:val."("')
+		let hists = histprop + histmeth
+		" Iframe - iframe.
+		let ifraprop = ['align', 'frameBorder', 'height', 'id', 'longDesc', 'marginHeight', 'marginWidth',
+					\ 'name', 'scrolling', 'src', 'width']
+		let ifras = ifraprop
+		" Image - image.
+		let imagprop = ['align', 'alt', 'border', 'complete', 'height', 'hspace', 'id', 'isMap', 'longDesc',
+					\ 'lowSrc', 'name', 'src', 'useMap', 'vspace', 'width']
+		let imagmeth = ['onAbort', 'onError', 'onLoad']
+		call map(imagmeth, 'v:val."("')
+		let imags = histprop + imagmeth
+		" Button - accessible only by other properties
+		let buttprop = ['accessKey', 'disabled', 'form', 'id', 'name', 'tabIndex', 'type', 'value']
+		let buttmeth = ['blur', 'click', 'focus', 'onBlur', 'onClick', 'onFocus', 'onMouseDown', 'onMouseUp']
+		call map(buttmeth, 'v:val."("')
+		let butts = buttprop + buttmeth
+		" Checkbox - accessible only by other properties
+		let checprop = ['accept', 'accessKey', 'align', 'alt', 'checked', 'defaultChecked', 
+					\ 'disabled', 'form', 'id', 'name', 'tabIndex', 'type', 'value'] 
+		let checmeth = ['blur', 'click', 'focus', 'onBlur', 'onClick', 'onFocus', 'onMouseDown', 'onMouseUp']
+		call map(checmeth, 'v:val."("')
+		let checs = checprop + checmeth
+		" File upload - accessible only by other properties
+		let fileprop = ['accept', 'accessKey', 'align', 'alt', 'defaultValue', 
+					\ 'disabled', 'form', 'id', 'name', 'tabIndex', 'type', 'value'] 
+		let filemeth = ['blur', 'focus', 'onBlur', 'onClick', 'onFocus', 'onMouseDown', 'onMouseUp']
+		call map(filemeth, 'v:val."("')
+		let files = fileprop + filemeth
+		" Hidden - accessible only by other properties
+		let hiddprop = ['defaultValue', 'form', 'id', 'name', 'type', 'value'] 
+		let hidds = hiddprop
+		" Password - accessible only by other properties
+		let passprop = ['accept', 'accessKey', 'defaultValue', 
+					\ 'disabled', 'form', 'id', 'maxLength', 'name', 'readOnly', 'size', 'tabIndex', 
+					\ 'type', 'value'] 
+		let passmeth = ['blur', 'click', 'focus', 'select', 'onBlur', 'onFocus', 'onKeyDown', 
+					\ 'onKeyPress', 'onKeyUp']
+		call map(passmeth, 'v:val."("')
+		let passs = passprop + passmeth
+		" Radio - accessible only by other properties
+		let radiprop = ['accept', 'accessKey', 'align', 'alt', 'checked', 'defaultChecked', 
+					\ 'disabled', 'form', 'id', 'name', 'tabIndex', 'type', 'value'] 
+		let radimeth = ['blur', 'click', 'focus', 'select', 'onBlur', 'onFocus']
+		call map(radimeth, 'v:val."("')
+		let radis = radiprop + radimeth
+		" Reset - accessible only by other properties
+		let reseprop = ['accept', 'accessKey', 'align', 'alt', 'defaultValue', 
+					\ 'disabled', 'form', 'id', 'name', 'size', 'tabIndex', 'type', 'value'] 
+		let resemeth = ['blur', 'click', 'focus', 'select', 'onBlur', 'onFocus']
+		call map(resemeth, 'v:val."("')
+		let reses = reseprop + resemeth
+		" Submit - accessible only by other properties
+		let submprop = ['accept', 'accessKey', 'align', 'alt', 'defaultValue', 
+					\ 'disabled', 'form', 'id', 'name', 'size', 'tabIndex', 'type', 'value'] 
+		let submmeth = ['blur', 'click', 'focus', 'select', 'onClick', 'onSelectStart']
+		call map(submmeth, 'v:val."("')
+		let subms = submprop + submmeth
+		" Text - accessible only by other properties
+		let textprop = ['accept', 'accessKey', 'align', 'alt', 'defaultValue', 
+					\ 'disabled', 'form', 'id', 'maxLength', 'name', 'readOnly', 
+					\ 'size', 'tabIndex', 'type', 'value'] 
+		let textmeth = ['blur', 'focus', 'select', 'onBlur', 'onChange', 'onFocus', 'onKeyDown',
+					\ 'onKeyPress', 'onKeyUp', 'onSelect']
+		call map(textmeth, 'v:val."("')
+		let texts = textprop + textmeth
+		" Link - link.
+		let linkprop = ['charset', 'disabled', 'href', 'hreflang', 'id', 'media',
+					\ 'rel', 'rev', 'target', 'type']
+		let linkmeth = ['onLoad']
+		call map(linkmeth, 'v:val."("')
+		let links = linkprop + linkmeth
+		" Location - location.
+		let locaprop = ['href', 'hash', 'host', 'hostname', 'pathname', 'port', 'protocol',
+					\ 'search']
+		let locameth = ['assign', 'reload', 'replace']
+		call map(locameth, 'v:val."("')
+		let locas = locaprop + locameth
+		" Meta - meta.
+		let metaprop = ['charset', 'content', 'disabled', 'httpEquiv', 'name', 'scheme']
+		let metas = metaprop
+		" Navigator - navigator.
+		let naviprop = ['plugins', 'appCodeName', 'appName', 'appVersion', 'cookieEnabled',
+					\ 'platform', 'userAgent']
+		let navimeth = ['javaEnabled', 'taintEnabled']
+		call map(navimeth, 'v:val."("')
+		let navis = naviprop + navimeth
+		" Object - object.
+		let objeprop = ['align', 'archive', 'border', 'code', 'codeBase', 'codeType', 'data',
+					\ 'declare', 'form', 'height', 'hspace', 'id', 'name', 'standby', 'tabIndex',
+					\ 'type', 'useMap', 'vspace', 'width']
+		let objes = objeprop
+		" Option - accessible only by other properties
+		let optiprop = ['defaultSelected', 
+					\ 'disabled', 'form', 'id', 'index', 'label', 'selected', 'text', 'value']
+		let optis = optiprop
+		" Screen - screen.
+		let screprop = ['availHeight', 'availWidth', 'colorDepth', 'height', 'width']
+		let scres = screprop
+		" Select - accessible only by other properties
+		let seleprop = ['options', 'disabled', 'form', 'id', 'length', 'multiple', 'name', 
+					\ 'selectedIndex', 'size', 'tabIndex', 'type', 'value'] 
+		let selemeth = ['blur', 'focus', 'remove', 'onBlur', 'onChange', 'onFocus']
+		call map(selemeth, 'v:val."("')
+		let seles = seleprop + selemeth
+		" Style - style.
+		let stylprop = ['background', 'backgroundAttachment', 'backgroundColor', 'backgroundImage',
+					\ 'backgroundPosition', 'backgroundRepeat',
+					\ 'border', 'borderBottom', 'borderLeft', 'borderRight', 'borderTop',
+					\ 'borderBottomColor', 'borderLeftColor', 'borderRightColor', 'borderTopColor',
+					\ 'borderBottomStyle', 'borderLeftStyle', 'borderRightStyle', 'borderTopStyle',
+					\ 'borderBottomWidth', 'borderLeftWidth', 'borderRightWidth', 'borderTopWidth',
+					\ 'borderColor', 'borderStyle', 'borderWidth', 'margin', 'marginBottom',
+					\ 'marginLeft', 'marginRight', 'marginTop', 'outline', 'outlineStyle', 'outlineWidth',
+					\ 'outlineColor', 'outlineStyle', 'outlineWidth', 'padding', 'paddingBottom',
+					\ 'paddingLeft', 'paddingRight', 'paddingTop',
+					\ 'clear', 'clip', 'clipBottom', 'clipLeft', 'clipRight', 'clipTop', 'content',
+					\ 'counterIncrement', 'counterReset', 'cssFloat', 'cursor', 'direction',
+					\ 'display', 'markerOffset', 'marks', 'maxHeight', 'maxWidth', 'minHeight',
+					\ 'minWidth', 'overflow', 'overflowX', 'overflowY', 'verticalAlign', 'visibility',
+					\ 'width',
+					\ 'listStyle', 'listStyleImage', 'listStylePosition', 'listStyleType',
+					\ 'cssText', 'bottom', 'height', 'left', 'position', 'right', 'top', 'width', 'zindex',
+					\ 'orphans', 'widows', 'page', 'pageBreakAfter', 'pageBreakBefore', 'pageBreakInside',
+					\ 'borderCollapse', 'borderSpacing', 'captionSide', 'emptyCells', 'tableLayout',
+					\ 'color', 'font', 'fontFamily', 'fontSize', 'fontSizeAdjust', 'fontStretch',
+					\ 'fontStyle', 'fontVariant', 'fontWeight', 'letterSpacing', 'lineHeight', 'quotes',
+					\ 'textAlign', 'textIndent', 'textShadow', 'textTransform', 'textUnderlinePosition',
+					\ 'unicodeBidi', 'whiteSpace', 'wordSpacing']
+		let styls = stylprop
+		" Table - table.
+		let tablprop = ['rows', 'tBodies', 'align', 'bgColor', 'border', 'caption', 'cellPadding',
+					\ 'cellSpacing', 'frame', 'height', 'rules', 'summary', 'tFoot', 'tHead', 'width']
+		let tablmeth = ['createCaption', 'createTFoot', 'createTHead', 'deleteCaption', 'deleteRow',
+					\ 'deleteTFoot', 'deleteTHead', 'insertRow']
+		call map(tablmeth, 'v:val."("')
+		let tabls = tablprop + tablmeth
+		" Table data - TableData.
+		let tdatprop = ['abbr', 'align', 'axis', 'bgColor', 'cellIndex', 'ch', 'chOff',
+					\ 'colSpan', 'headers', 'noWrap', 'rowSpan', 'scope', 'vAlign', 'width']
+		let tdats = tdatprop
+		" Table row - TableRow.
+		let trowprop = ['cells', 'align', 'bgColor', 'ch', 'chOff', 'rowIndex', 'sectionRowIndex',
+					\ 'vAlign']
+		let trowmeth = ['deleteCell', 'insertCell']
+		call map(trowmeth, 'v:val."("')
+		let trows = trowprop + trowmeth
+		" Textarea - accessible only by other properties
+		let tareprop = ['accessKey', 'cols', 'defaultValue', 
+					\ 'disabled', 'form', 'id', 'name', 'readOnly', 'rows', 
+					\ 'tabIndex', 'type', 'value', 'selectionStart', 'selectionEnd'] 
+		let taremeth = ['blur', 'focus', 'select', 'onBlur', 'onChange', 'onFocus']
+		call map(taremeth, 'v:val."("')
+		let tares = tareprop + taremeth
+		" Window - window.
+		let windprop = ['frames', 'closed', 'defaultStatus', 'encodeURI', 'event', 'history',
+					\ 'length', 'location', 'name', 'onload', 'opener', 'parent', 'screen', 'self',
+					\ 'status', 'top', 'XMLHttpRequest', 'ActiveXObject']
+		let windmeth = ['alert', 'blur', 'clearInterval', 'clearTimeout', 'close', 'confirm', 'focus',
+					\ 'moveBy', 'moveTo', 'open', 'print', 'prompt', 'scrollBy', 'scrollTo', 'setInterval',
+					\ 'setTimeout']
+		call map(windmeth, 'v:val."("')
+		let winds = windprop + windmeth
+		" XMLHttpRequest - access by new xxx()
+		let xmlhprop = ['onreadystatechange', 'readyState', 'responseText', 'responseXML',
+					\ 'status', 'statusText', 'parseError']
+		let xmlhmeth = ['abort', 'getAllResponseHeaders', 'getResponseHeaders', 'open',
+					\ 'send', 'setRequestHeader']
+		call map(xmlhmeth, 'v:val."("')
+		let xmlhs = xmlhprop + xmlhmeth
+
+		" XML DOM
+		" Attributes - element.attributes[x].
+		let xdomattrprop = ['name', 'specified', 'value']
+		" Element - anyelement.
+		let xdomelemprop = ['attributes', 'childNodes', 'firstChild', 'lastChild', 
+					\ 'namespaceURI', 'nextSibling', 'nodeName', 'nodeType', 'nodeValue',
+					\ 'ownerDocument', 'parentNode', 'prefix', 'previousSibling', 'tagName']
+		let xdomelemmeth = ['appendChild', 'cloneNode', 'getAttribute', 'getAttributeNode',
+					\ 'getElementsByTagName', 'hasChildNodes', 'insertBefore', 'normalize',
+					\ 'removeAttribute', 'removeAttributeNode', 'removeChild', 'replaceChild',
+					\ 'setAttribute', 'setAttributeNode']
+		call map(xdomelemmeth, 'v:val."("')
+		let xdomelems = xdomelemprop + xdomelemmeth
+		" Node - anynode.
+		let xdomnodeprop = ['attributes', 'childNodes', 'firstChild', 'lastChild', 
+					\ 'namespaceURI', 'nextSibling', 'nodeName', 'nodeType', 'nodeValue',
+					\ 'ownerDocument', 'parentNode', 'prefix', 'previousSibling']
+		let xdomnodemeth = ['appendChild', 'cloneNode',
+					\ 'hasChildNodes', 'insertBefore', 'removeChild', 'replaceChild']
+		call map(xdomnodemeth, 'v:val."("')
+		let xdomnodes = xdomnodeprop + xdomnodemeth
+		" NodeList 
+		let xdomnliss = ['length', 'item(']
+		" Error - parseError.
+		let xdomerror = ['errorCode', 'reason', 'line', 'linepos', 'srcText', 'url', 'filepos']
+
+		" Find object type declaration to reduce number of suggestions. {{{
+		" 1. Get object name
+		" 2. Find object declaration line
+		" 3. General declaration follows "= new Type" syntax, additional else
+		"    for regexp "= /re/"
+		" 4. Make correction for Microsoft.XMLHTTP ActiveXObject
+		" 5. Repeat for external files
+		let object = matchstr(shortcontext, '\zs\k\+\ze\(\[.\{-}\]\)\?\.$')
+		if len(object) > 0
+			let decl_line = search(object.'.\{-}=\s*new\s*', 'bn')
+			if decl_line > 0
+				let object_type = matchstr(getline(decl_line), object.'.\{-}=\s*new\s*\zs\k\+\ze')
+				if object_type == 'ActiveXObject' && matchstr(getline(decl_line), object.'.\{-}=\s*new\s*ActiveXObject\s*(.Microsoft\.XMLHTTP.)') != ''
+						let object_type = 'XMLHttpRequest'
+				endif
+			else
+				let decl_line = search('var\s*'.object.'\s*=\s*\/', 'bn')
+				if decl_line > 0
+					let object_type = 'RegExp'
+				endif
+			endif
+			" We didn't find var declaration in current file but we may have
+			" something in external files.
+			if decl_line == 0 && exists("b:js_extfiles")
+				let dext_line = filter(copy(b:js_extfiles), 'v:val =~ "'.object.'.\\{-}=\\s*new\\s*"')
+				if len(dext_line) > 0
+					let object_type = matchstr(dext_line[-1], object.'.\{-}=\s*new\s*\zs\k\+\ze')
+					if object_type == 'ActiveXObject' && matchstr(dext_line[-1], object.'.\{-}=\s*new\s*ActiveXObject\s*(.Microsoft\.XMLHTTP.)') != ''
+							let object_type = 'XMLHttpRequest'
+					endif
+				else
+					let dext_line = filter(copy(b:js_extfiles), 'v:val =~ "var\s*'.object.'\\s*=\\s*\\/"')
+					if len(dext_line) > 0
+						let object_type = 'RegExp'
+					endif
+				endif
+			endif
+		endif
+		" }}}
+
+		if !exists('object_type')
+			let object_type = ''
+		endif
+
+		if object_type == 'Date'
+			let values = dates
+		elseif object_type == 'Image'
+			let values = imags
+		elseif object_type == 'Array'
+			let values = arrays
+		elseif object_type == 'Boolean'
+			" TODO: a bit more than real boolean
+			let values = arrays
+		elseif object_type == 'XMLHttpRequest'
+			let values = xmlhs
+		elseif object_type == 'String'
+			let values = stris
+		elseif object_type == 'RegExp'
+			let values = reges
+		elseif object_type == 'Math'
+			let values = maths
+		endif
+
+		if !exists('values')
+		" List of properties
+		if shortcontext =~ 'Math\.$'
+			let values = maths
+		elseif shortcontext =~ 'anchors\(\[.\{-}\]\)\?\.$'
+			let values = anths
+		elseif shortcontext =~ 'area\.$'
+			let values = areas
+		elseif shortcontext =~ 'base\.$'
+			let values = bases
+		elseif shortcontext =~ 'body\.$'
+			let values = bodys
+		elseif shortcontext =~ 'document\.$'
+			let values = docus
+		elseif shortcontext =~ 'forms\(\[.\{-}\]\)\?\.$'
+			let values = forms
+		elseif shortcontext =~ 'frameset\.$'
+			let values = fsets
+		elseif shortcontext =~ 'history\.$'
+			let values = hists
+		elseif shortcontext =~ 'iframe\.$'
+			let values = ifras
+		elseif shortcontext =~ 'images\(\[.\{-}\]\)\?\.$'
+			let values = imags
+		elseif shortcontext =~ 'links\(\[.\{-}\]\)\?\.$'
+			let values = links
+		elseif shortcontext =~ 'location\.$'
+			let values = locas
+		elseif shortcontext =~ 'meta\.$'
+			let values = metas
+		elseif shortcontext =~ 'navigator\.$'
+			let values = navis
+		elseif shortcontext =~ 'object\.$'
+			let values = objes
+		elseif shortcontext =~ 'screen\.$'
+			let values = scres
+		elseif shortcontext =~ 'style\.$'
+			let values = styls
+		elseif shortcontext =~ 'table\.$'
+			let values = tabls
+		elseif shortcontext =~ 'TableData\.$'
+			let values = tdats
+		elseif shortcontext =~ 'TableRow\.$'
+			let values = trows
+		elseif shortcontext =~ 'window\.$'
+			let values = winds
+		elseif shortcontext =~ 'parseError\.$'
+			let values = xdomerror
+		elseif shortcontext =~ 'attributes\[\d\+\]\.$'
+			let values = xdomattrprop
+		else
+			let values = user_props + arrays + dates + funcs + maths + numbs + objes + reges + stris
+			let values += doms + anths + areas + bases + bodys + docus + forms + frams + fsets + hists
+			let values += ifras + imags + links + locas + metas + navis + objes + scres
+			let values += tabls + trows + tares + winds
+			let values += xdomnodes + xdomnliss + xdomelems
+		endif
+		endif
+
+		for m in values
+			if m =~? '^'.a:base
+				call add(res, m)
+			elseif m =~? a:base
+				call add(res2, m)
+			endif
+		endfor
+
+		unlet! values
+		return res + res2
+
+	endif
+	" }}}
+
+	" Get variables data.
+	let variables = filter(copy(file), 'v:val =~ "var\\s"')
+	call map(variables, 'matchstr(v:val, ".\\{-}var\\s\\+\\zs.*\\ze")')
+	call map(variables, 'substitute(v:val, ";\\|$", ",", "g")')
+	let vars = []
+	" This loop (and next one) is necessary to get variable names from
+	" constructs like: var var1, var2, var3 = "something";
+	for i in range(len(variables))
+		let comma_separated = split(variables[i], ',\s*')
+		call map(comma_separated, 'matchstr(v:val, "\\k\\+")')
+		let vars += comma_separated
+	endfor
+
+	let variables = sort(vars)
+	unlet! vars
+
+	" Add "no var" variables.
+	let undeclared_variables = filter(copy(file), 'v:val =~ "^\\s*\\k\\+\\s*="')
+	let u_vars = []
+	for i in range(len(undeclared_variables))
+		let  split_equal = split(undeclared_variables[i], '\s*=')
+		call map(split_equal, 'matchstr(v:val, "\\k\\+$")')
+		let u_vars += split_equal
+	endfor
+
+	let variables += sort(u_vars)
+	unlet! u_vars
+
+	" Get functions
+	let functions = filter(copy(file), 'v:val =~ "^\\s*function\\s"')
+	let arguments = copy(functions)
+	call map(functions, 'matchstr(v:val, "^\\s*function\\s\\+\\zs\\k\\+")')
+	call map(functions, 'v:val."("')
+	let functions = sort(functions)
+
+	" Create table to keep arguments for additional 'menu' info
+	let b:js_menuinfo = {}
+	for i in arguments
+		let g:ia = i
+		let f_elements = matchlist(i, 'function\s\+\(\k\+\)\s*(\(.\{-}\))')
+		if len(f_elements) == 3
+			let b:js_menuinfo[f_elements[1].'('] = f_elements[2]
+		endif
+	endfor
+
+	" Get functions arguments
+	call map(arguments, 'matchstr(v:val, "function.\\{-}(\\zs.\\{-}\\ze)")')
+	let jargs = join(arguments, ',')
+	let jargs = substitute(jargs, '\s', '', 'g')
+	let arguments = split(jargs, ',')
+	let arguments = sort(arguments)
+
+	" Built-in functions
+	let builtin = ['alert(', 'confirm(']
+
+	" Top-level HTML DOM objects
+	let htmldom = ['document', 'anchor', 'area', 'base', 'body', 'document', 'event', 'form', 'frame', 'frameset', 'history', 'iframe', 'image', 'input', 'link', 'location', 'meta', 'navigator', 'object', 'option', 'screen', 'select', 'table', 'tableData', 'tableHeader', 'tableRow', 'textarea', 'window']
+	call map(htmldom, 'v:val."."')
+
+	" Top-level properties
+	let properties = ['decodeURI', 'decodeURIComponent', 'encodeURI', 'encodeURIComponent',
+				\ 'eval', 'Infinity', 'isFinite', 'isNaN', 'NaN', 'Number', 'parseFloat',
+				\ 'parseInt', 'String', 'undefined', 'escape', 'unescape']
+
+	" Keywords
+	let keywords = ["Array", "Boolean", "Date", "Function", "Math", "Number", "Object", "RegExp", "String", "XMLHttpRequest", "ActiveXObject", "abstract", "boolean", "break", "byte", "case", "catch", "char", "class", "const", "continue", "debugger", "default", "delete", "do", "double ", "else", "enum", "export", "extends", "false", "final", "finally", "float", "for", "function", "goto", "if", "implements", "import", "in ", "instanceof", "int", "interface", "long", "native", "new", "null", "package", "private", "protected", "public", "return", "short", "static", "super ", "switch", "synchronized", "this", "throw", "throws", "transient", "true", "try", "typeof", "var", "void", "volatile", "while", "with"]
+
+	let values = variables + functions + htmldom + arguments + builtin + properties + keywords
+
+	for m in values
+		if m =~? '^'.a:base
+			call add(res, m)
+		elseif m =~? a:base
+			call add(res2, m)
+		endif
+	endfor
+
+	let menu = res + res2
+	let final_menu = []
+	for i in range(len(menu))
+		let item = menu[i]
+		if item =~ '($'
+			let kind = 'f'
+			if has_key(b:js_menuinfo, item)
+				let m_info = b:js_menuinfo[item]
+			else
+				let m_info = ''
+			endif
+		else
+			let kind = 'v'
+			let m_info = ''
+		endif
+		let final_menu += [{'word':item, 'menu':m_info, 'kind':kind}]
+	endfor
+	let g:fm = final_menu
+	return final_menu
+
+endfunction
+
+" vim:set foldmethod=marker:

runtime/autoload/netrwFileHandlers.vim

@@ -1,21 +1,43 @@
-" NetrwFileHandlers: contains various extension-based file handlers for
+" netrwFileHandlers: contains various extension-based file handlers for
 "                    netrw's browsers' x command ("eXecute launcher")
 " Author:	Charles E. Campbell, Jr.
-" Date:		Aug 31, 2004
-" Version:	3
+" Date:		Oct 12, 2005
+" Version:	7
+" Copyright:    Copyright (C) 1999-2005 Charles E. Campbell, Jr. {{{1
+"               Permission is hereby granted to use and distribute this code,
+"               with or without modifications, provided that this copyright
+"               notice is copied with it. Like anything else that's free,
+"               netrwFileHandlers.vim is provided *as is* and comes with no
+"               warranty of any kind, either expressed or implied. In no
+"               event will the copyright holder be liable for any damages
+"               resulting from the use of this software.
+"
+" Rom 6:23 (WEB) For the wages of sin is death, but the free gift of God {{{1
+"                is eternal life in Christ Jesus our Lord.
 
 " ---------------------------------------------------------------------
-" Prevent Reloading: {{{1
-if exists("g:loaded_netrwfilehandlers") || &cp
+" Load Once: {{{1
+if exists("g:loaded_netrwFileHandlers") || &cp
  finish
 endif
-let g:loaded_netrwfilehandlers= "v3"
+let s:keepcpo= &cpo
+set cpo&vim
+let g:loaded_netrwFileHandlers= "v7"
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_html: handles html when the user hits "x" when the {{{1
+" netrwFileHandlers#Init: {{{1
+"    This functions is here to allow a call to this function to autoload
+"    the netrwFileHandlers.vim file
+fun! netrwFileHandlers#Init()
+"  call Dfunc("netrwFileHandlers#Init()")
+"  call Dret("netrwFileHandlers#Init")
+endfun
+
+" ---------------------------------------------------------------------
+" netrwFileHandlers#NFH_html: handles html when the user hits "x" when the {{{1
 "                        cursor is atop a *.html file
-fun! NetrwFileHandler_html(pagefile)
-"  call Dfunc("NetrwFileHandler_html(".a:pagefile.")")
+fun! netrwFileHandlers#NFH_html(pagefile)
+"  call Dfunc("netrwFileHandlers#NFH_html(".a:pagefile.")")
 
   let page= substitute(a:pagefile,'^','file://','')
 
@@ -26,19 +48,19 @@ fun! NetrwFileHandler_html(pagefile)
 "   call Decho("executing !netscape ".page)
    exe "!netscape \"".page.'"'
   else
-"   call Dret("NetrwFileHandler_html 0")
+"   call Dret("netrwFileHandlers#NFH_html 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_html 1")
+"  call Dret("netrwFileHandlers#NFH_html 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_htm: handles html when the user hits "x" when the {{{1
+" netrwFileHandlers#NFH_htm: handles html when the user hits "x" when the {{{1
 "                        cursor is atop a *.htm file
-fun! NetrwFileHandler_htm(pagefile)
-"  call Dfunc("NetrwFileHandler_htm(".a:pagefile.")")
+fun! netrwFileHandlers#NFH_htm(pagefile)
+"  call Dfunc("netrwFileHandlers#NFH_htm(".a:pagefile.")")
 
   let page= substitute(a:pagefile,'^','file://','')
 
@@ -49,18 +71,18 @@ fun! NetrwFileHandler_htm(pagefile)
 "   call Decho("executing !netscape ".page)
    exe "!netscape \"".page.'"'
   else
-"   call Dret("NetrwFileHandler_htm 0")
+"   call Dret("netrwFileHandlers#NFH_htm 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_htm 1")
+"  call Dret("netrwFileHandlers#NFH_htm 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_jpg: {{{1
-fun! NetrwFileHandler_jpg(jpgfile)
-"  call Dfunc("NetrwFileHandler_jpg(jpgfile<".a:jpgfile.">)")
+" netrwFileHandlers#NFH_jpg: {{{1
+fun! netrwFileHandlers#NFH_jpg(jpgfile)
+"  call Dfunc("netrwFileHandlers#NFH_jpg(jpgfile<".a:jpgfile.">)")
 
   if executable("gimp")
    exe "silent! !gimp -s ".a:jpgfile
@@ -68,171 +90,156 @@ fun! NetrwFileHandler_jpg(jpgfile)
 "   call Decho("silent! !".expand("$SystemRoot")."/SYSTEM32/MSPAINT ".escape(a:jpgfile," []|'"))
    exe "!".expand("$SystemRoot")."/SYSTEM32/MSPAINT \"".a:jpgfile.'"'
   else
-"   call Dret("NetrwFileHandler_jpg 0")
+"   call Dret("netrwFileHandlers#NFH_jpg 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_jpg 1")
+"  call Dret("netrwFileHandlers#NFH_jpg 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_gif: {{{1
-fun! NetrwFileHandler_gif(giffile)
-"  call Dfunc("NetrwFileHandler_gif(giffile<".a:giffile.">)")
+" netrwFileHandlers#NFH_gif: {{{1
+fun! netrwFileHandlers#NFH_gif(giffile)
+"  call Dfunc("netrwFileHandlers#NFH_gif(giffile<".a:giffile.">)")
 
   if executable("gimp")
    exe "silent! !gimp -s ".a:giffile
   elseif executable(expand("$SystemRoot")."/SYSTEM32/MSPAINT.EXE")
    exe "silent! !".expand("$SystemRoot")."/SYSTEM32/MSPAINT \"".a:giffile.'"'
   else
-"   call Dret("NetrwFileHandler_gif 0")
+"   call Dret("netrwFileHandlers#NFH_gif 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_gif 1")
+"  call Dret("netrwFileHandlers#NFH_gif 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_png: {{{1
-fun! NetrwFileHandler_png(pngfile)
-"  call Dfunc("NetrwFileHandler_png(pngfile<".a:pngfile.">)")
+" netrwFileHandlers#NFH_png: {{{1
+fun! netrwFileHandlers#NFH_png(pngfile)
+"  call Dfunc("netrwFileHandlers#NFH_png(pngfile<".a:pngfile.">)")
 
   if executable("gimp")
    exe "silent! !gimp -s ".a:pngfile
   elseif executable(expand("$SystemRoot")."/SYSTEM32/MSPAINT.EXE")
    exe "silent! !".expand("$SystemRoot")."/SYSTEM32/MSPAINT \"".a:pngfile.'"'
   else
-"   call Dret("NetrwFileHandler_png 0")
+"   call Dret("netrwFileHandlers#NFH_png 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_png 1")
+"  call Dret("netrwFileHandlers#NFH_png 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_pnm: {{{1
-fun! NetrwFileHandler_pnm(pnmfile)
-"  call Dfunc("NetrwFileHandler_pnm(pnmfile<".a:pnmfile.">)")
+" netrwFileHandlers#NFH_pnm: {{{1
+fun! netrwFileHandlers#NFH_pnm(pnmfile)
+"  call Dfunc("netrwFileHandlers#NFH_pnm(pnmfile<".a:pnmfile.">)")
 
   if executable("gimp")
    exe "silent! !gimp -s ".a:pnmfile
   elseif executable(expand("$SystemRoot")."/SYSTEM32/MSPAINT.EXE")
    exe "silent! !".expand("$SystemRoot")."/SYSTEM32/MSPAINT \"".a:pnmfile.'"'
   else
-"   call Dret("NetrwFileHandler_pnm 0")
+"   call Dret("netrwFileHandlers#NFH_pnm 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_pnm 1")
+"  call Dret("netrwFileHandlers#NFH_pnm 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_bmp: visualize bmp files {{{1
-fun! NetrwFileHandler_bmp(bmpfile)
-"  call Dfunc("NetrwFileHandler_bmp(bmpfile<".a:bmpfile.">)")
+" netrwFileHandlers#NFH_bmp: visualize bmp files {{{1
+fun! netrwFileHandlers#NFH_bmp(bmpfile)
+"  call Dfunc("netrwFileHandlers#NFH_bmp(bmpfile<".a:bmpfile.">)")
 
   if executable("gimp")
    exe "silent! !gimp -s ".a:bmpfile
   elseif executable(expand("$SystemRoot")."/SYSTEM32/MSPAINT.EXE")
    exe "silent! !".expand("$SystemRoot")."/SYSTEM32/MSPAINT \"".a:bmpfile.'"'
   else
-"   call Dret("NetrwFileHandler_bmp 0")
+"   call Dret("netrwFileHandlers#NFH_bmp 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_bmp 1")
+"  call Dret("netrwFileHandlers#NFH_bmp 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_pdf: visualize pdf files {{{1
-fun! NetrwFileHandler_pdf(pdf)
-"  " call Dfunc("NetrwFileHandler_pdf(pdf<".a:pdf.">)")
+" netrwFileHandlers#NFH_pdf: visualize pdf files {{{1
+fun! netrwFileHandlers#NFH_pdf(pdf)
+"  " call Dfunc("netrwFileHandlers#NFH_pdf(pdf<".a:pdf.">)")
   if executable("gs")
    exe 'silent! !gs "'.a:pdf.'"'
   else
-"   " call Dret("NetrwFileHandler_pdf 0")
+"   " call Dret("netrwFileHandlers#NFH_pdf 0")
    return 0
   endif
 
-"  " call Dret("NetrwFileHandler_pdf 1")
+"  " call Dret("netrwFileHandlers#NFH_pdf 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_sxw: visualize sxw files {{{1
-fun! NetrwFileHandler_sxw(sxw)
-"  " call Dfunc("NetrwFileHandler_sxw(sxw<".a:sxw.">)")
-  if executable("gs")
-   exe 'silent! !gs "'.a:sxw.'"'
-  else
-"   " call Dret("NetrwFileHandler_sxw 0")
-   return 0
-  endif
-
-"  " call Dret("NetrwFileHandler_sxw 1")
-  return 1
-endfun
-
-" ---------------------------------------------------------------------
-" NetrwFileHandler_doc: visualize doc files {{{1
-fun! NetrwFileHandler_doc(doc)
-"  " call Dfunc("NetrwFileHandler_doc(doc<".a:doc.">)")
+" netrwFileHandlers#NFH_doc: visualize doc files {{{1
+fun! netrwFileHandlers#NFH_doc(doc)
+"  " call Dfunc("netrwFileHandlers#NFH_doc(doc<".a:doc.">)")
 
   if executable("oowriter")
    exe 'silent! !oowriter "'.a:doc.'"'
    redraw!
   else
-"   " call Dret("NetrwFileHandler_doc 0")
+"   " call Dret("netrwFileHandlers#NFH_doc 0")
    return 0
   endif
 
-"  " call Dret("NetrwFileHandler_doc 1")
+"  " call Dret("netrwFileHandlers#NFH_doc 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_sxw: visualize sxw files {{{1
-fun! NetrwFileHandler_sxw(sxw)
-"  " call Dfunc("NetrwFileHandler_sxw(sxw<".a:sxw.">)")
+" netrwFileHandlers#NFH_sxw: visualize sxw files {{{1
+fun! netrwFileHandlers#NFH_sxw(sxw)
+"  " call Dfunc("netrwFileHandlers#NFH_sxw(sxw<".a:sxw.">)")
 
   if executable("oowriter")
    exe 'silent! !oowriter "'.a:sxw.'"'
    redraw!
   else
-"   " call Dret("NetrwFileHandler_sxw 0")
+"   " call Dret("netrwFileHandlers#NFH_sxw 0")
    return 0
   endif
 
-"  " call Dret("NetrwFileHandler_sxw 1")
+"  " call Dret("netrwFileHandlers#NFH_sxw 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_xls: visualize xls files {{{1
-fun! NetrwFileHandler_xls(xls)
-"  " call Dfunc("NetrwFileHandler_xls(xls<".a:xls.">)")
+" netrwFileHandlers#NFH_xls: visualize xls files {{{1
+fun! netrwFileHandlers#NFH_xls(xls)
+"  " call Dfunc("netrwFileHandlers#NFH_xls(xls<".a:xls.">)")
 
   if executable("oocalc")
    exe 'silent! !oocalc "'.a:xls.'"'
    redraw!
   else
-"   " call Dret("NetrwFileHandler_xls 0")
+"   " call Dret("netrwFileHandlers#NFH_xls 0")
    return 0
   endif
 
-"  " call Dret("NetrwFileHandler_xls 1")
+"  " call Dret("netrwFileHandlers#NFH_xls 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_ps: handles PostScript files {{{1
-fun! NetrwFileHandler_ps(ps)
-"  call Dfunc("NetrwFileHandler_ps()")
+" netrwFileHandlers#NFH_ps: handles PostScript files {{{1
+fun! netrwFileHandlers#NFH_ps(ps)
+"  call Dfunc("netrwFileHandlers#NFH_ps()")
   if executable("gs")
    exe "silent! !gs ".a:ps
    redraw!
@@ -246,18 +253,18 @@ fun! NetrwFileHandler_ps(ps)
    exe "silent! !gswin32 \"".a:ps.'"'
    redraw!
   else
-"   call Dret("NetrwFileHandler_ps 0")
+"   call Dret("netrwFileHandlers#NFH_ps 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_ps 1")
+"  call Dret("netrwFileHandlers#NFH_ps 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_eps: handles encapsulated PostScript files {{{1
-fun! NetrwFileHandler_eps(eps)
-"  call Dfunc("NetrwFileHandler_ps()")
+" netrwFileHandlers#NFH_eps: handles encapsulated PostScript files {{{1
+fun! netrwFileHandlers#NFH_eps(eps)
+"  call Dfunc("netrwFileHandlers#NFH_ps()")
   if executable("gs")
    exe "silent! !gs ".a:eps
    redraw!
@@ -271,43 +278,44 @@ fun! NetrwFileHandler_eps(eps)
    exe "silent! !gswin32 \"".a:eps.'"'
    redraw!
   else
-"   call Dret("NetrwFileHandler_ps 0")
+"   call Dret("netrwFileHandlers#NFH_ps 0")
    return 0
   endif
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_fig: handles xfig files {{{1
-fun! NetrwFileHandler_fig(fig)
-"  call Dfunc("NetrwFileHandler_fig()")
+" netrwFileHandlers#NFH_fig: handles xfig files {{{1
+fun! netrwFileHandlers#NFH_fig(fig)
+"  call Dfunc("netrwFileHandlers#NFH_fig()")
   if executable("xfig")
    exe "silent! !xfig ".a:fig
    redraw!
   else
-"   call Dret("NetrwFileHandler_fig 0")
+"   call Dret("netrwFileHandlers#NFH_fig 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_fig 1")
+"  call Dret("netrwFileHandlers#NFH_fig 1")
   return 1
 endfun
 
 " ---------------------------------------------------------------------
-" NetrwFileHandler_obj: handles tgif's obj files {{{1
-fun! NetrwFileHandler_obj(obj)
-"  call Dfunc("NetrwFileHandler_obj()")
+" netrwFileHandlers#NFH_obj: handles tgif's obj files {{{1
+fun! netrwFileHandlers#NFH_obj(obj)
+"  call Dfunc("netrwFileHandlers#NFH_obj()")
   if has("unix") && executable("tgif")
    exe "silent! !tgif ".a:obj
    redraw!
   else
-"   call Dret("NetrwFileHandler_obj 0")
+"   call Dret("netrwFileHandlers#NFH_obj 0")
    return 0
   endif
 
-"  call Dret("NetrwFileHandler_obj 1")
+"  call Dret("netrwFileHandlers#NFH_obj 1")
   return 1
 endfun
 
-
+let &cpo= s:keepcpo
 " ---------------------------------------------------------------------
+"  Modelines: {{{1
 "  vim: ts=4 fdm=marker

runtime/autoload/netrwSettings.vim

@@ -0,0 +1,167 @@
+" netrwSettings.vim: makes netrw settings simpler
+" Date:		Jan 26, 2006
+" Maintainer:	Charles E Campbell, Jr <drchipNOSPAM at campbellfamily dot biz>
+" Version:	6a	ASTRO-ONLY
+" Copyright:    Copyright (C) 1999-2005 Charles E. Campbell, Jr. {{{1
+"               Permission is hereby granted to use and distribute this code,
+"               with or without modifications, provided that this copyright
+"               notice is copied with it. Like anything else that's free,
+"               netrwSettings.vim is provided *as is* and comes with no
+"               warranty of any kind, either expressed or implied. By using
+"               this plugin, you agree that in no event will the copyright
+"               holder be liable for any damages resulting from the use
+"               of this software.
+"
+" Mat 4:23 (WEB) Jesus went about in all Galilee, teaching in their {{{1
+"                synagogues, preaching the gospel of the kingdom, and healing
+"                every disease and every sickness among the people.
+" Load Once: {{{1
+if exists("g:loaded_netrwSettings") || &cp
+  finish
+endif
+let g:loaded_netrwSettings  = "v6a"
+
+" ---------------------------------------------------------------------
+" NetrwSettings: {{{1
+fun! netrwSettings#NetrwSettings()
+  " this call is here largely just to insure that netrw has been loaded
+  call netrw#NetSavePosn()
+  if !exists("g:loaded_netrw")
+   echohl WarningMsg | echomsg "***sorry*** netrw needs to be loaded prior to using NetrwSettings" | echohl None
+   return
+  endif
+
+  above wincmd s
+  enew
+  setlocal noswapfile bh=wipe
+  set ft=vim
+  file Netrw\ Settings
+
+  " these variables have the following default effects when they don't
+  " exist (ie. have not been set by the user in his/her .vimrc)
+  if !exists("g:netrw_longlist")
+   let g:netrw_longlist= 0
+   let g:netrw_list_cmd= "ssh HOSTNAME ls -FLa"
+  endif
+  if !exists("g:netrw_silent")
+   let g:netrw_silent= 0
+  endif
+  if !exists("g:netrw_use_nt_rcp")
+   let g:netrw_use_nt_rcp= 0
+  endif
+  if !exists("g:netrw_ftp")
+   let g:netrw_ftp= 0
+  endif
+  if !exists("g:netrw_ignorenetrc")
+   let g:netrw_ignorenetrc= 0
+  endif
+
+  put ='+ --------------------------------------------'
+  put ='+ NetrwSettings:  by Charles E. Campbell, Jr.'
+  put ='+  Press ? with cursor atop any line for help  '
+  put ='+ --------------------------------------------'
+  let s:netrw_settings_stop= line(".")
+
+  put =''
+  put ='+ Netrw Protocol Commands'
+  put = 'let g:netrw_dav_cmd           = '.g:netrw_dav_cmd
+  put = 'let g:netrw_fetch_cmd         = '.g:netrw_fetch_cmd
+  put = 'let g:netrw_ftp_cmd           = '.g:netrw_ftp_cmd
+  put = 'let g:netrw_http_cmd          = '.g:netrw_http_cmd
+  put = 'let g:netrw_rcp_cmd           = '.g:netrw_rcp_cmd
+  put = 'let g:netrw_rsync_cmd         = '.g:netrw_rsync_cmd
+  put = 'let g:netrw_scp_cmd           = '.g:netrw_scp_cmd
+  put = 'let g:netrw_sftp_cmd          = '.g:netrw_sftp_cmd
+  put = 'let g:netrw_ssh_cmd           = '.g:netrw_ssh_cmd
+  let s:netrw_protocol_stop= line(".")
+  put = ''
+
+  put ='+Netrw Transfer Control'
+  put = 'let g:netrw_cygwin            = '.g:netrw_cygwin
+  put = 'let g:netrw_ftp               = '.g:netrw_ftp
+  put = 'let g:netrw_ftpmode           = '.g:netrw_ftpmode
+  put = 'let g:netrw_ignorenetrc       = '.g:netrw_ignorenetrc
+  put = 'let g:netrw_use_nt_rcp        = '.g:netrw_use_nt_rcp
+  put = 'let g:netrw_win95ftp          = '.g:netrw_win95ftp
+  let s:netrw_xfer_stop= line(".")
+
+  put = ''
+  put ='+ Netrw Browser Control'
+  put = 'let g:netrw_alto              = '.g:netrw_alto
+  put = 'let g:netrw_altv              = '.g:netrw_altv
+  put = 'let g:netrw_browse_split      = '.g:netrw_browse_split
+  if exists("g:netrw_browsex_viewer")
+   put = 'let g:netrw_browsex_viewer    = '.g:netrw_browsex_viewer
+  else
+   put = 'let g:netrw_browsex_viewer    = (not defined)'
+  endif
+  put = 'let g:netrw_dirhistmax        = '.g:netrw_dirhistmax
+  put = 'let g:netrw_ftp_browse_reject = '.g:netrw_ftp_browse_reject
+  put = 'let g:netrw_ftp_list_cmd      = '.g:netrw_ftp_list_cmd
+  put = 'let g:netrw_hide              = '.g:netrw_hide
+  put = 'let g:netrw_keepdir           = '.g:netrw_keepdir
+  put = 'let g:netrw_list_cmd          = '.g:netrw_list_cmd
+  put = 'let g:netrw_list_hide         = '.g:netrw_list_hide
+  put = 'let g:netrw_local_mkdir       = '.g:netrw_local_mkdir
+  put = 'let g:netrw_local_rmdir       = '.g:netrw_local_rmdir
+  put = 'let g:netrw_longlist          = '.g:netrw_longlist
+  put = 'let g:netrw_maxfilenamelen    = '.g:netrw_maxfilenamelen
+  put = 'let g:netrw_mkdir_cmd         = '.g:netrw_mkdir_cmd
+  put = 'let g:netrw_rename_cmd        = '.g:netrw_rename_cmd
+  put = 'let g:netrw_rm_cmd            = '.g:netrw_rm_cmd
+  put = 'let g:netrw_rmdir_cmd         = '.g:netrw_rmdir_cmd
+  put = 'let g:netrw_rmf_cmd           = '.g:netrw_rmf_cmd
+  put = 'let g:netrw_silent            = '.g:netrw_silent
+  put = 'let g:netrw_sort_by           = '.g:netrw_sort_by
+  put = 'let g:netrw_sort_direction    = '.g:netrw_sort_direction
+  put = 'let g:netrw_sort_sequence     = '.g:netrw_sort_sequence
+  put = 'let g:netrw_ssh_browse_reject = '.g:netrw_ssh_browse_reject
+  put = 'let g:netrw_timefmt           = '.g:netrw_timefmt
+  put = 'let g:netrw_winsize           = '.g:netrw_winsize
+
+  put =''
+  put ='+ For help, place cursor on line and press ?'
+
+  1d
+  silent %s/^+/"/e
+  res 99
+  silent %s/= \([^0-9].*\)$/= '\1'/e
+  silent %s/= $/= ''/e
+  1
+
+  set nomod
+
+  map <buffer> <silent> ? :call NetrwSettingHelp()<cr>
+  let tmpfile= tempname()
+  exe 'au BufWriteCmd	Netrw\ Settings	silent w! '.tmpfile.'|so '.tmpfile.'|call delete("'.tmpfile.'")|set nomod'
+endfun
+
+" ---------------------------------------------------------------------
+" NetrwSettingHelp: {{{2
+fun! NetrwSettingHelp()
+"  call Dfunc("NetrwSettingHelp()")
+  let curline = getline(".")
+  if curline =~ '='
+   let varhelp = substitute(curline,'^\s*let ','','e')
+   let varhelp = substitute(varhelp,'\s*=.*$','','e')
+"   call Decho("trying help ".varhelp)
+   try
+    exe "he ".varhelp
+   catch /^Vim\%((\a\+)\)\=:E149/
+   	echo "***sorry*** no help available for <".varhelp.">"
+   endtry
+  elseif line(".") < s:netrw_settings_stop
+   he netrw-settings
+  elseif line(".") < s:netrw_protocol_stop
+   he netrw-externapp
+  elseif line(".") < s:netrw_xfer_stop
+   he netrw-variables
+  else
+   he netrw-browse-var
+  endif
+"  call Dret("NetrwSettingHelp")
+endfun
+
+" ---------------------------------------------------------------------
+" Modelines: {{{1
+" vim:ts=8 fdm=marker

runtime/autoload/pycomplete.vim

@@ -0,0 +1,351 @@
+"pycomplete.vim - Omni Completion for python
+" Maintainer: Aaron Griffin
+" Version: 0.3
+" Last Updated: 23 January 2006
+"
+"   v0.3 Changes:
+"       added top level def parsing
+"       for safety, call returns are not evaluated
+"       handful of parsing changes
+"       trailing ( and . characters
+"       argument completion on open parens
+"       stop parsing at current line - ++performance, local var resolution
+"
+"   TODO
+"       RExec subclass
+"       Code cleanup + make class
+"       use internal dict, not globals()
+
+if !has('python')
+    echo "Error: Required vim compiled with +python"
+    finish
+endif
+
+function! pycomplete#Complete(findstart, base)
+    "findstart = 1 when we need to get the text length
+    if a:findstart
+        let line = getline('.')
+        let idx = col('.')
+        while idx > 0
+            let idx -= 1
+            let c = line[idx-1]
+            if c =~ '\w'
+                continue
+            elseif ! c =~ '\.'
+                idx = -1
+                break
+            else
+                break
+            endif
+        endwhile
+
+        return idx
+    "findstart = 0 when we need to return the list of completions
+    else
+        execute "python get_completions('" . a:base . "')"
+        return g:pycomplete_completions
+    endif
+endfunction
+
+function! s:DefPython()
+python << PYTHONEOF
+import vim, sys, types
+import __builtin__
+import tokenize, keyword, cStringIO
+
+LOCALDEFS = \
+	['LOCALDEFS', 'clean_up','eval_source_code', \
+	 'get_completions', '__builtin__', '__builtins__', \
+	 'dbg', '__name__', 'vim', 'sys', 'parse_to_end', \
+     'parse_statement', 'tokenize', 'keyword', 'cStringIO', \
+     'debug_level', 'safe_eval', '_ctor', 'get_arguments', \
+     'strip_calls', 'types', 'parse_block']
+
+def dbg(level,msg):
+    debug_level = 1
+    try:
+        debug_level = vim.eval("g:pycomplete_debug_level")
+    except:
+        pass
+    if level <= debug_level: print(msg)
+
+def strip_calls(stmt):
+    parsed=''
+    level = 0
+    for c in stmt:
+        if c in ['[','(']:
+            level += 1
+        elif c in [')',']']:
+            level -= 1
+        elif level == 0:
+            parsed += c
+    ##dbg(10,"stripped: %s" % parsed)
+    return parsed
+
+def get_completions(base):
+    stmt = vim.eval('expand("<cWORD>")')
+    #dbg(1,"statement: %s - %s" % (stmt, base))
+    stmt = stmt+base
+    eval_source_code()
+
+    try:
+        ridx = stmt.rfind('.')
+        if stmt[-1] == '(':
+            match = ""
+            stmt = strip_calls(stmt[:len(stmt)-1])
+            all = get_arguments(eval(stmt))
+        elif ridx == -1:
+            match = stmt
+            all = globals() + __builtin__.__dict__
+        else:
+            match = stmt[ridx+1:]
+            stmt = strip_calls(stmt[:ridx])
+            all = eval(stmt).__dict__
+
+        #dbg(15,"completions for: %s, match=%s" % (stmt,match))
+        completions = []
+        if type(all) == types.DictType:
+            for m in all:
+                if m.find('_') != 0 and m.find(match) == 0 and \
+			       m not in LOCALDEFS:
+                    #dbg(25,"matched... %s, %s" % (m, m.find(match)))
+                    typestr = str(all[m])
+                    if "function" in typestr: m += '('
+                    elif "method" in typestr: m += '('
+                    elif "module" in typestr: m += '.'
+                    elif "class" in typestr: m += '('
+                    completions.append(m)
+            completions.sort()
+        else:
+            completions.append(all)
+        #dbg(10,"all completions: %s" % completions)
+        vim.command("let g:pycomplete_completions = %s" % completions)
+    except:
+        vim.command("let g:pycomplete_completions = []")
+        #dbg(1,"exception: %s" % sys.exc_info()[1])
+    clean_up()
+
+def get_arguments(func_obj):
+    def _ctor(obj):
+        try:
+            return class_ob.__init__.im_func
+        except AttributeError:
+            for base in class_ob.__bases__:
+                rc = _find_constructor(base)
+                if rc is not None: return rc
+        return None
+
+    arg_offset = 1
+    if type(func_obj) == types.ClassType: func_obj = _ctor(func_obj)
+    elif type(func_obj) == types.MethodType: func_obj = func_obj.im_func
+    else: arg_offset = 0
+    
+    #dbg(20,"%s, offset=%s" % (str(func_obj), arg_offset))
+
+    arg_text = ''
+    if type(func_obj) in [types.FunctionType, types.LambdaType]:
+        try:
+            cd = func_obj.func_code
+            real_args = cd.co_varnames[arg_offset:cd.co_argcount]
+            defaults = func_obj.func_defaults or []
+            defaults = list(map(lambda name: "=%s" % name, defaults))
+            defaults = [""] * (len(real_args)-len(defaults)) + defaults
+            items = map(lambda a,d: a+d, real_args, defaults)
+            if func_obj.func_code.co_flags & 0x4:
+                items.append("...")
+            if func_obj.func_code.co_flags & 0x8:
+                items.append("***")
+            arg_text = ", ".join(items) + ')'
+
+        except:
+            #dbg(1,"exception: %s" % sys.exc_info()[1])
+            pass
+    if len(arg_text) == 0:
+        # The doc string sometimes contains the function signature
+        #  this works for alot of C modules that are part of the
+        #  standard library
+        doc = getattr(func_obj, '__doc__', '')
+        if doc:
+            doc = doc.lstrip()
+            pos = doc.find('\n')
+            if pos > 0:
+                sigline = doc[:pos]
+                lidx = sigline.find('(')
+                ridx = sigline.find(')')
+                retidx = sigline.find('->')
+                ret = sigline[retidx+2:].strip()
+                if lidx > 0 and ridx > 0:
+                    arg_text = sigline[lidx+1:ridx] + ')'
+                    if len(ret) > 0: arg_text += ' #returns %s' % ret
+    #dbg(15,"argument completion: %s" % arg_text)
+    return arg_text
+
+def parse_to_end(gen):
+    stmt=''
+    level = 0
+    for type, str, begin, end, line in gen:
+        if line == vim.eval('getline(\'.\')'): break
+        elif str == '\\': continue
+        elif str == ';':
+            break
+        elif type == tokenize.NEWLINE and level == 0:
+            break
+        elif str in ['[','(']:
+            level += 1
+        elif str in [')',']']:
+            level -= 1
+        elif level == 0:
+            stmt += str
+        #dbg(10,"current statement: %s" % stmt)
+    return stmt
+
+def parse_block(gen):
+    lines = []
+    level = 0
+    for type, str, begin, end, line in gen:
+        if line.replace('\n','') == vim.eval('getline(\'.\')'): break
+        elif type == tokenize.INDENT:
+            level += 1
+        elif type == tokenize.DEDENT:
+            level -= 1
+            if level == 0: break;
+        else:
+            stmt = parse_statement(gen,str)
+            if len(stmt) > 0: lines.append(stmt)
+    return lines
+
+def parse_statement(gen,curstr=''):
+    var = curstr
+    type, str, begin, end, line = gen.next()
+    if str == '=':
+        type, str, begin, end, line = gen.next()
+        if type == tokenize.NEWLINE:
+            return ''
+        elif type == tokenize.STRING or str == 'str':  
+            return '%s = str' % var
+        elif str == '[' or str == 'list':
+            return '%s= list' % var
+        elif str == '{' or str == 'dict':
+            return '%s = dict' % var
+        elif type == tokenize.NUMBER:
+            return '%s = 0' % var
+        elif str == 'Set': 
+            return '%s = Set' % var
+        elif str == 'open' or str == 'file':
+            return '%s = file' % var
+        else:
+            inst = str + parse_to_end(gen)
+            if len(inst) > 0:
+                #dbg(5,"found [%s = %s]" % (var, inst))
+                return '%s = %s' % (var, inst)
+    return ''
+
+def eval_source_code():
+    LINE=vim.eval('getline(\'.\')')
+    s = cStringIO.StringIO('\n'.join(vim.current.buffer[:]) + '\n')
+    g = tokenize.generate_tokens(s.readline)
+
+    stmts = []
+    lineNo = 0
+    try:
+        for type, str, begin, end, line in g:
+            if line.replace('\n','') == vim.eval('getline(\'.\')'): break
+            elif begin[0] == lineNo: continue
+            #junk
+            elif type == tokenize.INDENT or \
+                 type == tokenize.DEDENT or \
+                 type == tokenize.ERRORTOKEN or \
+                 type == tokenize.ENDMARKER or \
+                 type == tokenize.NEWLINE or \
+                 type == tokenize.COMMENT:
+                continue
+            #import statement
+            elif str == 'import':
+                import_stmt=parse_to_end(g)
+                if len(import_stmt) > 0:
+                    #dbg(5,"found [import %s]" % import_stmt)
+                    stmts.append("import %s" % import_stmt)
+            #import from statement
+            elif str == 'from':
+                type, str, begin, end, line = g.next()
+                mod = str
+
+                type, str, begin, end, line = g.next()
+                if str != "import": break
+                from_stmt=parse_to_end(g)
+                if len(from_stmt) > 0:
+                    #dbg(5,"found [from %s import %s]" % (mod, from_stmt))
+                    stmts.append("from %s import %s" % (mod, from_stmt))
+            #def statement
+            elif str == 'def':
+                funcstr = ''
+                for type, str, begin, end, line in g:
+                    if line.replace('\n','') == vim.eval('getline(\'.\')'): break
+                    elif str == ':':
+                        stmts += parse_block(g)
+                        break
+                    funcstr += str
+                if len(funcstr) > 0:
+                    #dbg(5,"found [def %s]" % funcstr)
+                    stmts.append("def %s:\n   pass" % funcstr)
+            #class declaration
+            elif str == 'class':
+                type, str, begin, end, line = g.next()
+                classname = str
+                #dbg(5,"found [class %s]" % classname)
+
+                level = 0
+                members = []
+                for type, str, begin, end, line in g:
+                    if line.replace('\n','') == vim.eval('getline(\'.\')'): break
+                    elif type == tokenize.INDENT:
+                        level += 1
+                    elif type == tokenize.DEDENT:
+                        level -= 1
+                        if level == 0: break;
+                    elif str == 'def':
+                        memberstr = ''
+                        for type, str, begin, end, line in g:
+                            if line.replace('\n','') == vim.eval('getline(\'.\')'): break
+                            elif str == ':':
+                                stmts += parse_block(g)
+                                break
+                            memberstr += str
+                        #dbg(5,"   member [%s]" % memberstr)
+                        members.append(memberstr)
+                classstr = 'class %s:' % classname
+                for m in members:
+                    classstr += ("\n   def %s:\n      pass" % m)
+                stmts.append("%s\n" % classstr)
+            elif keyword.iskeyword(str) or str in globals():
+                #dbg(5,"keyword = %s" % str)
+                lineNo = begin[0]
+            else:
+                assign = parse_statement(g,str)
+                if len(assign) > 0: stmts.append(assign)
+                
+        for s in stmts:
+            try:
+                #dbg(15,"evaluating: %s\n" % s)
+                exec(s) in globals()
+            except:
+                #dbg(1,"exception: %s" % sys.exc_info()[1])
+                pass
+    except:
+        #dbg(1,"exception: %s" % sys.exc_info()[1])
+        pass
+
+def clean_up():
+    for o in globals().keys():
+        if o not in LOCALDEFS:
+            try:
+                exec('del %s' % o) in globals()
+            except: pass
+
+sys.path.extend(['.','..'])
+PYTHONEOF
+endfunction
+
+let g:pycomplete_debug_level = 0
+call s:DefPython()
+" vim: set et ts=4:

runtime/autoload/spellfile.vim

@@ -0,0 +1,111 @@
+" Vim script to download a missing spell file
+" Maintainer:	Bram Moolenaar <Bram@vim.org>
+" Last Change:	2006 Feb 01
+
+if !exists('g:spellfile_URL')
+  let g:spellfile_URL = 'ftp://ftp.vim.org/pub/vim/unstable/runtime/spell'
+endif
+let s:spellfile_URL = ''    " Start with nothing so that s:donedict is reset.
+
+" This function is used for the spellfile plugin.
+function! spellfile#LoadFile(lang)
+  " If the netrw plugin isn't loaded we silently skip everything.
+  if !exists(":Nread")
+    if &verbose
+      echomsg 'spellfile#LoadFile(): Nread command is not available.'
+    endif
+    return
+  endif
+
+  " If the URL changes we try all files again.
+  if s:spellfile_URL != g:spellfile_URL
+    let s:donedict = {}
+    let s:spellfile_URL = g:spellfile_URL
+  endif
+
+  " I will say this only once!
+  if has_key(s:donedict, a:lang . &enc)
+    if &verbose
+      echomsg 'spellfile#LoadFile(): Tried this language/encoding before.'
+    endif
+    return
+  endif
+  let s:donedict[a:lang . &enc] = 1
+
+  " Find spell directories we can write in.
+  let dirlist = []
+  let dirchoices = '&Cancel'
+  for dir in split(globpath(&rtp, 'spell'), "\n")
+    if filewritable(dir) == 2
+      call add(dirlist, dir)
+      let dirchoices .= "\n&" . len(dirlist)
+    endif
+  endfor
+  if len(dirlist) == 0
+    if &verbose
+      echomsg 'spellfile#LoadFile(): There is no writable spell directory.'
+    endif
+    return
+  endif
+
+  let msg = 'Cannot find spell file for "' . a:lang . '" in ' . &enc
+  let msg .= "\nDo you want me to try downloading it?"
+  if confirm(msg, "&Yes\n&No", 2) == 1
+    let enc = &encoding
+    if enc == 'iso-8859-15'
+      let enc = 'latin1'
+    endif
+    let fname = a:lang . '.' . enc . '.spl'
+
+    " Split the window, read the file into a new buffer.
+    new
+    setlocal bin
+    echo 'Downloading ' . fname . '...'
+    exe 'Nread ' g:spellfile_URL . '/' . fname
+    if getline(2) !~ 'VIMspell'
+      " Didn't work, perhaps there is an ASCII one.
+      g/^/d
+      let fname = a:lang . '.ascii.spl'
+      echo 'Could not find it, trying ' . fname . '...'
+      exe 'Nread ' g:spellfile_URL . '/' . fname
+      if getline(2) !~ 'VIMspell'
+	echo 'Sorry, downloading failed'
+	bwipe!
+	return
+      endif
+    endif
+
+    " Delete the empty first line and mark the file unmodified.
+    1d
+    set nomod
+
+    let msg = "In which directory do you want to write the file:"
+    for i in range(len(dirlist))
+      let msg .= "\n" . (i + 1) . '. ' . dirlist[i]
+    endfor
+    let dirchoice = confirm(msg, dirchoices) - 2
+    if dirchoice >= 0
+      exe "write " . escape(dirlist[dirchoice], ' ') . '/' . fname
+
+      " Also download the .sug file, if the user wants to.
+      let msg = "Do you want me to try getting the .sug file?\n"
+      let msg .= "This will improve making suggestions for spelling mistakes,\n"
+      let msg .= "but it uses quite a bit of memory."
+      if confirm(msg, "&No\n&Yes") == 2
+	g/^/d
+	let fname = substitute(fname, '\.spl$', '.sug', '')
+	echo 'Downloading ' . fname . '...'
+	exe 'Nread ' g:spellfile_URL . '/' . fname
+	if getline(2) !~ 'VIMsug'
+	  echo 'Sorry, downloading failed'
+	else
+	  1d
+	  exe "write " . escape(dirlist[dirchoice], ' ') . '/' . fname
+	endif
+	set nomod
+      endif
+    endif
+
+    bwipe
+  endif
+endfunc

runtime/autoload/syntaxcomplete.vim

@@ -0,0 +1,260 @@
+" Vim completion script
+" Language:    All languages, uses existing syntax highlighting rules
+" Maintainer:  David Fishburn <fishburn@ianywhere.com>
+" Version:     1.1
+" Last Change: Wed Mar 01 2006 9:58:14 PM
+
+" Set completion with CTRL-X CTRL-O to autoloaded function.
+if exists('+omnifunc')
+    setlocal omnifunc=syntaxcomplete#Complete
+endif
+
+if exists('g:loaded_syntax_completion')
+    finish 
+endif
+let g:loaded_syntax_completion = 1
+
+" This script will build a completion list based on the syntax
+" elements defined by the files in $VIMRUNTIME/syntax.
+
+let s:syn_remove_words = 'match,matchgroup=,contains,'.
+            \ 'links to,start=,end=,nextgroup='
+
+let s:cache_name = []
+let s:cache_list = []
+
+" This function is used for the 'omnifunc' option.
+function! syntaxcomplete#Complete(findstart, base)
+
+    if a:findstart
+        " Locate the start of the item, including "."
+        let line = getline('.')
+        let start = col('.') - 1
+        let lastword = -1
+        while start > 0
+            if line[start - 1] =~ '\w'
+                let start -= 1
+            elseif line[start - 1] =~ '\.'
+                " The user must be specifying a column name
+                if lastword == -1
+                    let lastword = start
+                endif
+                let start -= 1
+                let b:sql_compl_type = 'column'
+            else
+                break
+            endif
+        endwhile
+
+        " Return the column of the last word, which is going to be changed.
+        " Remember the text that comes before it in s:prepended.
+        if lastword == -1
+            let s:prepended = ''
+            return start
+        endif
+        let s:prepended = strpart(line, start, lastword - start)
+        return lastword
+    endif
+
+    let base = s:prepended . a:base
+
+    let list_idx = index(s:cache_name, &filetype, 0, &ignorecase)
+    if list_idx > -1
+        let compl_list = s:cache_list[list_idx]
+    else
+        let compl_list = OmniSyntaxList()
+        let s:cache_name  = add( s:cache_name,  &filetype )
+        let s:cache_list  = add( s:cache_list,  compl_list )
+    endif
+
+    " Return list of matches.
+
+    if base =~ '\w'
+        let compstr = join(compl_list, ' ')
+        let compstr = substitute(compstr, '\<\%('.base.'\)\@!\w\+\s*', '', 'g')
+        let compl_list = split(compstr, '\s\+')
+    endif
+
+    return compl_list
+endfunc
+
+function! OmniSyntaxList()
+    let saveL = @l
+    
+    " Loop through all the syntax groupnames, and build a
+    " syntax file which contains these names.  This can 
+    " work generically for any filetype that does not already
+    " have a plugin defined.
+    " This ASSUMES the syntax groupname BEGINS with the name
+    " of the filetype.  From my casual viewing of the vim7\syntax 
+    " directory.
+    redir @l
+    silent! exec 'syntax list '
+    redir END
+
+    let syntax_full = "\n".@l
+    let @l = saveL
+
+    if syntax_full =~ 'E28' 
+                \ || syntax_full =~ 'E411'
+                \ || syntax_full =~ 'E415'
+                \ || syntax_full =~ 'No Syntax items'
+        return []
+    endif
+
+    " Default the include group to include the requested syntax group
+    let syntax_group_include_{&filetype} = ''
+    " Check if there are any overrides specified for this filetype
+    if exists('g:omni_syntax_group_include_'.&filetype)
+        let syntax_group_include_{&filetype} =
+                    \ substitute( g:omni_syntax_group_include_{&filetype},'\s\+','','g') 
+        if syntax_group_include_{&filetype} =~ '\w'
+            let syntax_group_include_{&filetype} = 
+                        \ substitute( syntax_group_include_{&filetype}, 
+                        \ '\s*,\s*', '\\|', 'g'
+                        \ )
+        endif
+    endif
+
+    " Default the exclude group to nothing
+    let syntax_group_exclude_{&filetype} = ''
+    " Check if there are any overrides specified for this filetype
+    if exists('g:omni_syntax_group_exclude_'.&filetype)
+        let syntax_group_exclude_{&filetype} =
+                    \ substitute( g:omni_syntax_group_exclude_{&filetype},'\s\+','','g') 
+        if syntax_group_exclude_{&filetype} =~ '\w' 
+            let syntax_group_exclude_{&filetype} = 
+                        \ substitute( syntax_group_exclude_{&filetype}, 
+                        \ '\s*,\s*', '\\|', 'g'
+                        \ )
+        endif
+    endif
+
+    " Syntax rules can contain items for more than just the current 
+    " filetype.  They can contain additional items added by the user
+    " via autocmds or their vimrc.
+    " Some syntax files can be combined (html, php, jsp).
+    " We want only items that begin with the filetype we are interested in.
+    let next_group_regex = '\n' .
+                \ '\zs'.&filetype.'\w\+\ze'.
+                \ '\s\+xxx\s\+' 
+    let syn_list = ''
+    let index    = 0
+    let index    = match(syntax_full, next_group_regex, index)
+
+    while index > 0
+        let group_name = matchstr( syntax_full, '\w\+', index )
+
+        let get_syn_list = 1
+        " if syntax_group_include_{&filetype} == ''
+        "     if syntax_group_exclude_{&filetype} != ''
+        "         if '\<'.syntax_group_exclude_{&filetype}.'\>' =~ '\<'.group_name.'\>'
+        "             let get_syn_list = 0
+        "         endif
+        "     endif
+        " else
+        "     if '\<'.syntax_group_include_{&filetype}.'\>' !~ '\<'.group_name.'\>'
+        "         let get_syn_list = 0
+        "     endif
+        " endif
+        if syntax_group_exclude_{&filetype} != ''
+            if '\<'.syntax_group_exclude_{&filetype}.'\>' =~ '\<'.group_name.'\>'
+                let get_syn_list = 0
+            endif
+        endif
+    
+        if get_syn_list == 1
+            if syntax_group_include_{&filetype} != ''
+                if '\<'.syntax_group_include_{&filetype}.'\>' !~ '\<'.group_name.'\>'
+                    let get_syn_list = 0
+                endif
+            endif
+        endif
+
+        if get_syn_list == 1
+            " Pass in the full syntax listing, plus the group name we 
+            " are interested in.
+            let extra_syn_list = s:SyntaxGroupItems(group_name, syntax_full)
+
+            let syn_list = syn_list . extra_syn_list . "\n"
+        endif
+
+        let index = index + strlen(group_name)
+        let index = match(syntax_full, next_group_regex, index)
+    endwhile
+
+    " Convert the string to a List and sort it.
+    let compl_list = sort(split(syn_list))
+
+    if &filetype == 'vim'
+        let short_compl_list = []
+        for i in range(len(compl_list))
+            if i == len(compl_list)-1
+                let next = i
+            else
+                let next = i + 1
+            endif
+            if  compl_list[next] !~ '^'.compl_list[i].'.$'
+                let short_compl_list += [compl_list[i]]
+            endif
+        endfor
+
+        return short_compl_list
+    else
+        return compl_list
+    endif
+endfunction
+
+function! s:SyntaxGroupItems( group_name, syntax_full )
+
+    let syn_list = ""
+
+    " From the full syntax listing, strip out the portion for the
+    " request group.
+    " Query:
+    "     \n           - must begin with a newline
+    "     a:group_name - the group name we are interested in
+    "     \s\+xxx\s\+  - group names are always followed by xxx
+    "     \zs          - start the match
+    "     .\{-}        - everything ...
+    "     \ze          - end the match
+    "     \n\w         - at the first newline starting with a character
+    let syntax_group = matchstr(a:syntax_full, 
+                \ "\n".a:group_name.'\s\+xxx\s\+\zs.\{-}\ze'."\n".'\w'
+                \)
+
+    if syntax_group != ""
+        " let syn_list = substitute( @l, '^.*xxx\s*\%(contained\s*\)\?', "", '' )
+        " let syn_list = substitute( @l, '^.*xxx\s*', "", '' )
+
+        " We only want the words for the lines begining with
+        " containedin, but there could be other items.
+        
+        " Tried to remove all lines that do not begin with contained
+        " but this does not work in all cases since you can have
+        "    contained nextgroup=...
+        " So this will strip off the ending of lines with known
+        " keywords.
+        let syn_list = substitute( syntax_group, '\<\('.
+                    \ substitute(
+                    \ escape( s:syn_remove_words, '\\/.*$^~[]')
+                    \ , ',', '\\|', 'g').
+                    \ '\).\{-}\%($\|'."\n".'\)'
+                    \ , "\n", 'g' )
+
+        " Now strip off the newline + blank space + contained
+        let syn_list = substitute( syn_list, '\%(^\|\n\)\@<=\s*\<\('.
+                    \ 'contained\)'
+                    \ , "", 'g' )
+
+        " There are a number of items which have non-word characters in
+        " them, *'T_F1'*.  vim.vim is one such file.
+        " This will replace non-word characters with spaces.
+        let syn_list = substitute( syn_list, '[^0-9A-Za-z_ ]', ' ', 'g' )
+    else
+        let syn_list = ''
+    endif
+
+    return syn_list
+endfunction
+

runtime/autoload/tar.vim

@@ -0,0 +1,333 @@
+" tar.vim: Handles browsing tarfiles
+"            AUTOLOAD PORTION
+" Date:			Dec 24, 2005
+" Version:		7
+" Maintainer:	Charles E Campbell, Jr <drchipNOSPAM at campbellfamily dot biz>
+" License:		Vim License  (see vim's :help license)
+"
+"	Contains many ideas from Michael Toren's <tar.vim>
+"
+" Copyright:    Copyright (C) 2005 Charles E. Campbell, Jr. {{{1
+"               Permission is hereby granted to use and distribute this code,
+"               with or without modifications, provided that this copyright
+"               notice is copied with it. Like anything else that's free,
+"               tarPlugin.vim is provided *as is* and comes with no warranty
+"               of any kind, either expressed or implied. By using this
+"               plugin, you agree that in no event will the copyright
+"               holder be liable for any damages resulting from the use
+"               of this software.
+
+" ---------------------------------------------------------------------
+" Initialization: {{{1
+let s:keepcpo= &cpo
+set cpo&vim
+if exists("g:loaded_tar")
+ finish
+endif
+let g:loaded_tar= "v7"
+
+" ---------------------------------------------------------------------
+"  Default Settings: {{{1
+if !exists("g:tar_browseoptions")
+ let g:tar_browseoptions= "Ptf"
+endif
+if !exists("g:tar_readoptions")
+ let g:tar_readoptions= "OPxf"
+endif
+if !exists("g:tar_writeoptions")
+ let g:tar_writeoptions= "uf"
+endif
+
+" ----------------
+"  Functions: {{{1
+" ----------------
+
+" ---------------------------------------------------------------------
+" tar#Browse: {{{2
+fun! tar#Browse(tarfile)
+"  call Dfunc("tar#Browse(tarfile<".a:tarfile.">)")
+  let repkeep= &report
+  set report=10
+
+  " sanity checks
+  if !executable("tar")
+   echohl Error | echo '***error*** (tar#Browse) "tar" not available on your system'
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   let &report= repkeep
+"   call Dret("tar#Browse")
+   return
+  endif
+  if !filereadable(a:tarfile)
+   if a:tarfile !~# '^\a\+://'
+    " if its an url, don't complain, let url-handlers such as vim do its thing
+    echohl Error | echo "***error*** (tar#Browse) File not readable<".a:tarfile.">" | echohl None
+    call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   endif
+   let &report= repkeep
+"   call Dret("tar#Browse : file<".a:tarfile."> not readable")
+   return
+  endif
+  if &ma != 1
+   set ma
+  endif
+  let w:tarfile= a:tarfile
+
+  setlocal noswapfile
+  setlocal buftype=nofile
+  setlocal bufhidden=hide
+  setlocal nobuflisted
+  setlocal nowrap
+  set ft=tar
+
+  " give header
+  exe "$put ='".'\"'." tar.vim version ".g:loaded_tar."'"
+  exe "$put ='".'\"'." Browsing tarfile ".a:tarfile."'"
+  exe "$put ='".'\"'." Select a file with cursor and press ENTER"."'"
+  0d
+  $
+
+  if a:tarfile =~# '\.\(gz\|tgz\)$'
+   exe "silent r! gzip -d -c '".a:tarfile."'| tar -".g:tar_browseoptions." - "
+  elseif a:tarfile =~# '\.bz2$'
+   exe "silent r! bzip2 -d -c '".a:tarfile."'| tar -".g:tar_browseoptions." - "
+  else
+   exe "silent r! tar -".g:tar_browseoptions." '".a:tarfile."'"
+  endif
+  silent %g@/$@d
+
+  setlocal noma nomod ro
+  noremap <silent> <buffer> <cr> :call <SID>TarBrowseSelect()<cr>
+
+  let &report= repkeep
+"  call Dret("tar#Browse : w:tarfile<".w:tarfile.">")
+endfun
+
+" ---------------------------------------------------------------------
+" TarBrowseSelect: {{{2
+fun! s:TarBrowseSelect()
+"  call Dfunc("TarBrowseSelect() w:tarfile<".w:tarfile."> curfile<".expand("%").">")
+  let repkeep= &report
+  set report=10
+  let fname= getline(".")
+"  call Decho("fname<".fname.">")
+
+  " sanity check
+  if fname =~ '^"'
+   let &report= repkeep
+"   call Dret("TarBrowseSelect")
+   return
+  endif
+
+  " about to make a new window, need to use w:tarfile
+  let tarfile= w:tarfile
+  let curfile= expand("%")
+
+  new
+  wincmd _
+  let s:tblfile_{winnr()}= curfile
+"  call Decho("exe e tarfile:".tarfile.':'.fname)
+  exe "e tarfile:".tarfile.':'.fname
+  filetype detect
+
+  let &report= repkeep
+"  call Dret("TarBrowseSelect : s:tblfile_".winnr()."<".s:tblfile_{winnr()}.">")
+endfun
+
+" ---------------------------------------------------------------------
+" tar#Read: {{{2
+fun! tar#Read(fname,mode)
+"  call Dfunc("tar#Read(fname<".a:fname.">,mode=".a:mode.")")
+  let repkeep= &report
+  set report=10
+  let tarfile = substitute(a:fname,'tarfile:\(.\{-}\):.*$','\1','')
+  let fname   = substitute(a:fname,'tarfile:.\{-}:\(.*\)$','\1','')
+"  call Decho("tarfile<".tarfile."> fname<".fname.">")
+
+  if tarfile =~# '\.\(gz\|tgz\)$'
+"   call Decho("exe silent r! gzip -d -c '".tarfile."'| tar -OPxf - '".fname."'")
+   exe "silent r! gzip -d -c '".tarfile."'| tar -".g:tar_readoptions." - '".fname."'"
+  elseif tarfile =~# '\.bz2$'
+"   call Decho("exe silent r! bzip2 -d -c '".tarfile."'| tar -".g:tar_readoptions." - '".fname."'")
+   exe "silent r! bzip2 -d -c '".tarfile."'| tar -".g:tar_readoptions." - '".fname."'"
+  else
+"   call Decho("exe silent r! tar -".g:tar_readoptions." '".tarfile."' '".fname."'")
+   exe "silent r! tar -".g:tar_readoptions." '".tarfile."' '".fname."'"
+  endif
+  let w:tarfile= a:fname
+  exe "file tarfile:".fname
+
+  " cleanup
+  0d
+  set nomod
+
+  let &report= repkeep
+"  call Dret("tar#Read : w:tarfile<".w:tarfile.">")
+endfun
+
+" ---------------------------------------------------------------------
+" tar#Write: {{{2
+fun! tar#Write(fname)
+"  call Dfunc("tar#Write(fname<".a:fname.">) w:tarfile<".w:tarfile."> tblfile_".winnr()."<".s:tblfile_{winnr()}.">")
+  let repkeep= &report
+  set report=10
+
+  " sanity checks
+  if !executable("tar")
+   echohl Error | echo '***error*** (tar#Browse) "tar" not available on your system'
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   let &report= repkeep
+"   call Dret("tar#Write")
+   return
+  endif
+  if !exists("*mkdir")
+   echohl Error | echo "***error*** (tar#Write) sorry, mkdir() doesn't work on your system" | echohl None
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   let &report= repkeep
+"   call Dret("tar#Write")
+   return
+  endif
+
+  let curdir= getcwd()
+  let tmpdir= tempname()
+"  call Decho("orig tempname<".tmpdir.">")
+  if tmpdir =~ '\.'
+   let tmpdir= substitute(tmpdir,'\.[^.]*$','','e')
+  endif
+"  call Decho("tmpdir<".tmpdir.">")
+  call mkdir(tmpdir,"p")
+
+  " attempt to change to the indicated directory
+  try
+   exe "cd ".escape(tmpdir,' \')
+  catch /^Vim\%((\a\+)\)\=:E344/
+   echohl Error | echo "***error*** (tar#Write) cannot cd to temporary directory" | Echohl None
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   let &report= repkeep
+"   call Dret("tar#Write")
+   return
+  endtry
+"  call Decho("current directory now: ".getcwd())
+
+  " place temporary files under .../_ZIPVIM_/
+  if isdirectory("_ZIPVIM_")
+   call s:Rmdir("_ZIPVIM_")
+  endif
+  call mkdir("_ZIPVIM_")
+  cd _ZIPVIM_
+"  call Decho("current directory now: ".getcwd())
+
+  let tarfile = substitute(w:tarfile,'tarfile:\(.\{-}\):.*$','\1','')
+  let fname   = substitute(w:tarfile,'tarfile:.\{-}:\(.*\)$','\1','')
+
+  " handle compressed archives
+  if tarfile =~# '\.gz'
+   call system("gzip -d ".tarfile)
+   let tarfile = substitute(tarfile,'\.gz','','e')
+   let compress= "gzip '".tarfile."'"
+  elseif tarfile =~# '\.tgz'
+   call system("gzip -d ".tarfile)
+   let tarfile = substitute(tarfile,'\.tgz','.tar','e')
+   let compress= "gzip '".tarfile."'"
+   let tgz     = 1
+  elseif tarfile =~# '\.bz2'
+   call system("bzip2 -d ".tarfile)
+   let tarfile = substitute(tarfile,'\.bz2','','e')
+   let compress= "bzip2 '".tarfile."'"
+  endif
+
+  if v:shell_error != 0
+   echohl Error | echo "***error*** (tar#Write) sorry, unable to update ".tarfile." with ".fname | echohl None
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+  else
+
+"   call Decho("tarfile<".tarfile."> fname<".fname.">")
+ 
+   if fname =~ '/'
+    let dirpath = substitute(fname,'/[^/]\+$','','e')
+    if executable("cygpath")
+     let dirpath = substitute(system("cygpath ".dirpath),'\n','','e')
+    endif
+    call mkdir(dirpath,"p")
+   endif
+   if tarfile !~ '/'
+    let tarfile= curdir.'/'.tarfile
+   endif
+"   call Decho("tarfile<".tarfile."> fname<".fname.">")
+ 
+   exe "w! ".fname
+   if executable("cygpath")
+    let tarfile = substitute(system("cygpath ".tarfile),'\n','','e')
+   endif
+ 
+   " delete old file from tarfile
+"   call Decho("tar --delete -f '".tarfile."' '".fname."'")
+   call system("tar --delete -f '".tarfile."' '".fname."'")
+   if v:shell_error != 0
+    echohl Error | echo "***error*** (tar#Write) sorry, unable to update ".tarfile." with ".fname | echohl None
+    call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   else
+ 
+    " update tarfile with new file 
+"    call Decho("tar -".g:tar_writeoptions." '".tarfile."' '".fname."'")
+    call system("tar -".g:tar_writeoptions." '".tarfile."' '".fname."'")
+    if v:shell_error != 0
+     echohl Error | echo "***error*** (tar#Write) sorry, unable to update ".tarfile." with ".fname | echohl None
+     call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+    elseif exists("compress")
+"     call Decho("call system(".compress.")")
+     call system(compress)
+     if exists("tgz")
+"      call Decho("rename(".tarfile.".gz,".substitute(tarfile,'\.tar$','.tgz','e').")")
+      call rename(tarfile.".gz",substitute(tarfile,'\.tar$','.tgz','e'))
+     endif
+    endif
+   endif
+
+   " support writing tarfiles across a network
+   if s:tblfile_{winnr()} =~ '^\a\+://'
+"    call Decho("handle writing <".tarfile."> across network to <".s:tblfile_{winnr()}.">")
+    let tblfile= s:tblfile_{winnr()}
+    1split|enew
+    let binkeep= &binary
+    let eikeep = &ei
+    set binary ei=all
+    exe "e! ".tarfile
+    call netrw#NetWrite(tblfile)
+    let &ei     = eikeep
+    let &binary = binkeep
+    q!
+    unlet s:tblfile_{winnr()}
+   endif
+  endif
+  
+  " cleanup and restore current directory
+  cd ..
+  call s:Rmdir("_ZIPVIM_")
+  exe "cd ".escape(curdir,' \')
+  setlocal nomod
+
+  let &report= repkeep
+"  call Dret("tar#Write")
+endfun
+
+" ---------------------------------------------------------------------
+" Rmdir: {{{2
+fun! s:Rmdir(fname)
+"  call Dfunc("Rmdir(fname<".a:fname.">)")
+  if has("unix")
+   call system("/bin/rm -rf ".a:fname)
+  elseif has("win32") || has("win95") || has("win64") || has("win16")
+   if &shell =~? "sh$"
+    call system("/bin/rm -rf ".a:fname)
+   else
+    call system("del /S ".a:fname)
+   endif
+  endif
+"  call Dret("Rmdir")
+endfun
+
+" ------------------------------------------------------------------------
+" Modelines And Restoration: {{{1
+let &cpo= s:keepcpo
+unlet s:keepcpo
+" vim:ts=8 fdm=marker

runtime/autoload/xmlcomplete.vim

@@ -0,0 +1,502 @@
+" Vim completion script
+" Language:	XML
+" Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
+" Last Change:	2006 Feb 18
+
+" This function will create Dictionary with users namespace strings and values
+" canonical (system) names of data files.  Names should be lowercase,
+" descriptive to avoid any future conflicts. For example 'xhtml10s' should be
+" name for data of XHTML 1.0 Strict and 'xhtml10t' for XHTML 1.0 Transitional
+" User interface will be provided by XMLns command defined ...
+" Currently supported canonicals are:
+" xhtml10s - XHTML 1.0 Strict
+" xsl      - XSL
+function! xmlcomplete#CreateConnection(canonical, ...)
+
+	" When only one argument provided treat name as default namespace (without
+	" 'prefix:').
+	if exists("a:1")
+		let users = a:1
+	else
+		let users = 'DEFAULT'
+	endif
+
+	" Source data file. Due to suspected errors in autoload do it with
+	" :runtime. 
+	" TODO: make it properly (using autoload, that is) later
+	exe "runtime autoload/xml/".a:canonical.".vim"
+
+	" Remove all traces of unexisting files to return [] when trying
+	" omnicomplete something
+	" TODO: give warning about non-existing canonicals - should it be?
+	if !exists("g:xmldata_".a:canonical)
+		unlet! g:xmldata_connection
+		return 0
+	endif
+
+	" We need to initialize Dictionary to add key-value pair
+	if !exists("g:xmldata_connection")
+		let g:xmldata_connection = {}
+	endif
+
+	let g:xmldata_connection[users] = a:canonical
+
+endfunction
+
+function! xmlcomplete#CreateEntConnection(...)
+	if a:0 > 0
+		let g:xmldata_entconnect = a:1
+	else
+		let g:xmldata_entconnect = 'DEFAULT'
+	endif
+endfunction
+
+function! xmlcomplete#CompleteTags(findstart, base)
+  if a:findstart
+    " locate the start of the word
+	let curline = line('.')
+    let line = getline('.')
+    let start = col('.') - 1
+	let compl_begin = col('.') - 2
+
+    while start >= 0 && line[start - 1] =~ '\(\k\|[:.-]\)'
+		let start -= 1
+    endwhile
+
+	if start >= 0 && line[start - 1] =~ '&'
+		let b:entitiescompl = 1
+		let b:compl_context = ''
+		return start
+	endif
+
+	let b:compl_context = getline('.')[0:(compl_begin)]
+	if b:compl_context !~ '<[^>]*$'
+		" Look like we may have broken tag. Check previous lines. Up to
+		" 10?
+		let i = 1
+		while 1
+			let context_line = getline(curline-i)
+			if context_line =~ '<[^>]*$'
+				" Yep, this is this line
+				let context_lines = getline(curline-i, curline)
+				let b:compl_context = join(context_lines, ' ')
+				break
+			elseif context_line =~ '>[^<]*$'
+				" Normal tag line, no need for completion at all
+				let b:compl_context = ''
+				break
+			endif
+			let i += 1
+		endwhile
+		" Make sure we don't have counter
+		unlet! i
+	endif
+	let b:compl_context = matchstr(b:compl_context, '.*\zs<.*')
+
+	" Make sure we will have only current namespace
+	unlet! b:xml_namespace
+	let b:xml_namespace = matchstr(b:compl_context, '^<\zs\k*\ze:')
+	if b:xml_namespace == ''
+		let b:xml_namespace = 'DEFAULT'
+	endif
+
+    return start
+
+  else
+	" There is no connction of namespace and data file. Abandon action
+	if !exists("g:xmldata_connection") || g:xmldata_connection == {}
+		return []
+	endif
+	" Initialize base return lists
+    let res = []
+    let res2 = []
+	" a:base is very short - we need context
+	if len(b:compl_context) == 0  && !exists("b:entitiescompl")
+		return []
+	endif
+	let context = matchstr(b:compl_context, '^<\zs.*')
+	unlet! b:compl_context
+
+	" Make entities completion
+	if exists("b:entitiescompl")
+		unlet! b:entitiescompl
+
+		if !exists("g:xmldata_entconnect") || g:xmldata_entconnect == 'DEFAULT'
+			let values =  g:xmldata{'_'.g:xmldata_connection['DEFAULT']}['vimxmlentities']
+		else
+			let values =  g:xmldata{'_'.g:xmldata_entconnect}['vimxmlentities']
+		endif
+
+		" Get only lines with entity declarations but throw out
+		" parameter-entities - they may be completed in future
+		let entdecl = filter(getline(1, "$"), 'v:val =~ "<!ENTITY\\s\\+[^%]"')
+
+		if len(entdecl) > 0
+			let intent = map(copy(entdecl), 'matchstr(v:val, "<!ENTITY\\s\\+\\zs\\(\\k\\|[.-:]\\)\\+\\ze")')
+			let values = intent + values
+		endif
+
+		if len(a:base) == 1
+			for m in values
+				if m =~ '^'.a:base
+					call add(res, m.';')
+				endif
+			endfor
+			return res
+		else
+			for m in values
+				if m =~? '^'.a:base
+					call add(res, m.';')
+				elseif m =~? a:base
+					call add(res2, m.';')
+				endif
+			endfor
+
+			return res + res2
+		endif
+
+	endif
+	if context =~ '>'
+		" Generally if context contains > it means we are outside of tag and
+		" should abandon action
+		return []
+	endif
+
+    " find tags matching with "a:base"
+	" If a:base contains white space it is attribute. 
+	" It could be also value of attribute...
+	" We have to get first word to offer
+	" proper completions
+	if context == ''
+		let tag = ''
+	else
+		let tag = split(context)[0]
+	endif
+	" Get rid of namespace
+	let tag = substitute(tag, '^'.b:xml_namespace.':', '', '')
+
+
+	" Get last word, it should be attr name
+	let attr = matchstr(context, '.*\s\zs.*')
+	" Possible situations where any prediction would be difficult:
+	" 1. Events attributes
+	if context =~ '\s'
+
+		" If attr contains =\s*[\"'] we catched value of attribute
+		if attr =~ "=\s*[\"']"
+			" Let do attribute specific completion
+			let attrname = matchstr(attr, '.*\ze\s*=')
+			let entered_value = matchstr(attr, ".*=\\s*[\"']\\zs.*")
+
+			if tag =~ '^[?!]'
+				" Return nothing if we are inside of ! or ? tag
+				return []
+			else
+				let values = g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}[tag][1][attrname]
+			endif
+
+			if len(values) == 0
+				return []
+			endif
+
+			" We need special version of sbase
+			let attrbase = matchstr(context, ".*[\"']")
+			let attrquote = matchstr(attrbase, '.$')
+
+			for m in values
+				" This if is needed to not offer all completions as-is
+				" alphabetically but sort them. Those beginning with entered
+				" part will be as first choices
+				if m =~ '^'.entered_value
+					call add(res, m . attrquote.' ')
+				elseif m =~ entered_value
+					call add(res2, m . attrquote.' ')
+				endif
+			endfor
+
+			return res + res2
+
+		endif
+
+		if tag =~ '?xml'
+			" Two possible arguments for <?xml> plus variation
+			let attrs = ['encoding', 'version="1.0"', 'version']
+		elseif tag =~ '^!'
+			" Don't make completion at all
+			return []
+		else
+			let attrs = keys(g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}[tag][1])
+		endif
+
+		for m in sort(attrs)
+			if m =~ '^'.attr
+				call add(res, m)
+			elseif m =~ attr
+				call add(res2, m)
+			endif
+		endfor
+		let menu = res + res2
+		let final_menu = []
+		if has_key(g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}, 'vimxmlattrinfo')
+			for i in range(len(menu))
+				let item = menu[i]
+				if has_key(g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}['vimxmlattrinfo'], item)
+					let m_menu = g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}['vimxmlattrinfo'][item][0]
+					let m_info = g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}['vimxmlattrinfo'][item][1]
+				else
+					let m_menu = ''
+					let m_info = ''
+				endif
+				if tag !~ '^[?!]' && len(g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}[tag][1][item]) > 0 && g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}[tag][1][item][0] =~ '^\(BOOL\|'.item.'\)$'
+					let item = item
+				else
+					let item .= '="'
+				endif
+				let final_menu += [{'word':item, 'menu':m_menu, 'info':m_info}]
+			endfor
+		else
+			for i in range(len(menu))
+				let item = menu[i]
+				if tag !~ '^[?!]' && len(g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}[tag][1][item]) > 0 && g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}[tag][1][item][0] =~ '^\(BOOL\|'.item.'\)$'
+					let item = item
+				else
+					let item .= '="'
+				endif
+				let final_menu += [item]
+			endfor
+		endif
+		return final_menu
+
+	endif
+	" Close tag
+	let b:unaryTagsStack = "base meta link hr br param img area input col"
+	if context =~ '^\/'
+		let opentag = xmlcomplete#GetLastOpenTag("b:unaryTagsStack")
+		return [opentag.">"]
+	endif
+
+	" Complete elements of XML structure
+	" TODO: #REQUIRED, #IMPLIED, #FIXED, #PCDATA - but these should be detected like
+	" entities - in first run
+	" keywords: CDATA, ID, IDREF, IDREFS, ENTITY, ENTITIES, NMTOKEN, NMTOKENS
+	" are hardly recognizable but keep it in reserve
+	" also: EMPTY ANY SYSTEM PUBLIC DATA
+	if context =~ '^!'
+		let tags = ['!ELEMENT', '!DOCTYPE', '!ATTLIST', '!ENTITY', '!NOTATION', '![CDATA[', '![INCLUDE[', '![IGNORE[']
+
+		for m in tags
+			if m =~ '^'.context
+				let m = substitute(m, '^!\[\?', '', '')
+				call add(res, m)
+			elseif m =~ context
+				let m = substitute(m, '^!\[\?', '', '')
+				call add(res2, m)
+			endif
+		endfor
+
+		return res + res2
+
+	endif
+
+	" Complete text declaration
+	let g:co = context
+	if context =~ '^?'
+		let tags = ['?xml']
+
+		for m in tags
+			if m =~ '^'.context
+				call add(res, substitute(m, '^?', '', ''))
+			elseif m =~ context
+				call add(res, substitute(m, '^?', '', ''))
+			endif
+		endfor
+
+		return res + res2
+
+	endif
+
+	" Deal with tag completion.
+	let opentag = xmlcomplete#GetLastOpenTag("b:unaryTagsStack")
+	let opentag = substitute(opentag, '^\k*:', '', '')
+	if opentag == ''
+		"return []
+	    let tags = keys(g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]})
+		call filter(tags, 'v:val !~ "^vimxml"')
+	else
+		let tags = g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}[opentag][0]
+	endif
+
+	let context = substitute(context, '^\k*:', '', '')
+
+	for m in tags
+		if m =~ '^'.context
+			call add(res, m)
+		elseif m =~ context
+			call add(res2, m)
+		endif
+	endfor
+	let menu = res + res2
+	if has_key(g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}, 'vimxmltaginfo')
+		let final_menu = []
+		for i in range(len(menu))
+			let item = menu[i]
+			if has_key(g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}['vimxmltaginfo'], item)
+				let m_menu = g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}['vimxmltaginfo'][item][0]
+				let m_info = g:xmldata{'_'.g:xmldata_connection[b:xml_namespace]}['vimxmltaginfo'][item][1]
+			else
+				let m_menu = ''
+				let m_info = ''
+			endif
+			if b:xml_namespace == 'DEFAULT'
+				let xml_namespace = ''
+			else
+				let xml_namespace = b:xml_namespace.':'
+			endif
+			let final_menu += [{'word':xml_namespace.item, 'menu':m_menu, 'info':m_info}]
+		endfor
+	else
+		let final_menu = menu
+	endif
+	return final_menu
+
+  endif
+endfunction
+
+" MM: This is greatly reduced closetag.vim used with kind permission of Steven
+"     Mueller
+"     Changes: strip all comments; delete error messages; add checking for
+"     namespace
+" Author: Steven Mueller <diffusor@ugcs.caltech.edu>
+" Last Modified: Tue May 24 13:29:48 PDT 2005 
+" Version: 0.9.1
+
+function! xmlcomplete#GetLastOpenTag(unaryTagsStack)
+	let linenum=line('.')
+	let lineend=col('.') - 1 " start: cursor position
+	let first=1              " flag for first line searched
+	let b:TagStack=''        " main stack of tags
+	let startInComment=s:InComment()
+
+	if exists("b:xml_namespace")
+		if b:xml_namespace == 'DEFAULT'
+			let tagpat='</\=\(\k\|[.-]\)\+\|/>'
+		else
+			let tagpat='</\='.b:xml_namespace.':\(\k\|[.-]\)\+\|/>'
+		endif
+	else
+		let tagpat='</\=\(\k\|[.-]\)\+\|/>'
+	endif
+	while (linenum>0)
+		let line=getline(linenum)
+		if first
+			let line=strpart(line,0,lineend)
+		else
+			let lineend=strlen(line)
+		endif
+		let b:lineTagStack=''
+		let mpos=0
+		let b:TagCol=0
+		while (mpos > -1)
+			let mpos=matchend(line,tagpat)
+			if mpos > -1
+				let b:TagCol=b:TagCol+mpos
+				let tag=matchstr(line,tagpat)
+
+				if exists('b:closetag_disable_synID') || startInComment==s:InCommentAt(linenum, b:TagCol)
+					let b:TagLine=linenum
+					call s:Push(matchstr(tag,'[^<>]\+'),'b:lineTagStack')
+				endif
+				let lineend=lineend-mpos
+				let line=strpart(line,mpos,lineend)
+			endif
+		endwhile
+		while (!s:EmptystackP('b:lineTagStack'))
+			let tag=s:Pop('b:lineTagStack')
+			if match(tag, '^/') == 0		"found end tag
+				call s:Push(tag,'b:TagStack')
+			elseif s:EmptystackP('b:TagStack') && !s:Instack(tag, a:unaryTagsStack)	"found unclosed tag
+				return tag
+			else
+				let endtag=s:Peekstack('b:TagStack')
+				if endtag == '/'.tag || endtag == '/'
+					call s:Pop('b:TagStack')	"found a open/close tag pair
+				elseif !s:Instack(tag, a:unaryTagsStack) "we have a mismatch error
+					return ''
+				endif
+			endif
+		endwhile
+		let linenum=linenum-1 | let first=0
+	endwhile
+return ''
+endfunction
+
+function! s:InComment()
+	return synIDattr(synID(line('.'), col('.'), 0), 'name') =~ 'Comment\|String'
+endfunction
+
+function! s:InCommentAt(line, col)
+	return synIDattr(synID(a:line, a:col, 0), 'name') =~ 'Comment\|String'
+endfunction
+
+function! s:SetKeywords()
+	let g:IsKeywordBak=&iskeyword
+	let &iskeyword='33-255'
+endfunction
+
+function! s:RestoreKeywords()
+	let &iskeyword=g:IsKeywordBak
+endfunction
+
+function! s:Push(el, sname)
+	if !s:EmptystackP(a:sname)
+		exe 'let '.a:sname."=a:el.' '.".a:sname
+	else
+		exe 'let '.a:sname.'=a:el'
+	endif
+endfunction
+
+function! s:EmptystackP(sname)
+	exe 'let stack='.a:sname
+	if match(stack,'^ *$') == 0
+		return 1
+	else
+		return 0
+	endif
+endfunction
+
+function! s:Instack(el, sname)
+	exe 'let stack='.a:sname
+	call s:SetKeywords()
+	let m=match(stack, '\<'.a:el.'\>')
+	call s:RestoreKeywords()
+	if m < 0
+		return 0
+	else
+		return 1
+	endif
+endfunction
+
+function! s:Peekstack(sname)
+	call s:SetKeywords()
+	exe 'let stack='.a:sname
+	let top=matchstr(stack, '\<.\{-1,}\>')
+	call s:RestoreKeywords()
+	return top
+endfunction
+
+function! s:Pop(sname)
+	if s:EmptystackP(a:sname)
+		return ''
+	endif
+	exe 'let stack='.a:sname
+	call s:SetKeywords()
+	let loc=matchend(stack,'\<.\{-1,}\>')
+	exe 'let '.a:sname.'=strpart(stack, loc+1, strlen(stack))'
+	let top=strpart(stack, match(stack, '\<'), loc)
+	call s:RestoreKeywords()
+	return top
+endfunction
+
+function! s:Clearstack(sname)
+	exe 'let '.a:sname."=''"
+endfunction

runtime/autoload/zip.vim

@@ -0,0 +1,271 @@
+" zip.vim: Handles browsing zipfiles
+"            AUTOLOAD PORTION
+" Date:			Dec 21, 2005
+" Version:		6
+" Maintainer:	Charles E Campbell, Jr <drchipNOSPAM at campbellfamily dot biz>
+" License:		Vim License  (see vim's :help license)
+" Copyright:    Copyright (C) 2005 Charles E. Campbell, Jr. {{{1
+"               Permission is hereby granted to use and distribute this code,
+"               with or without modifications, provided that this copyright
+"               notice is copied with it. Like anything else that's free,
+"               zipPlugin.vim is provided *as is* and comes with no warranty
+"               of any kind, either expressed or implied. By using this
+"               plugin, you agree that in no event will the copyright
+"               holder be liable for any damages resulting from the use
+"               of this software.
+
+" ---------------------------------------------------------------------
+" Initialization: {{{1
+let s:keepcpo= &cpo
+set cpo&vim
+if exists("g:loaded_zip")
+ finish
+endif
+
+let g:loaded_zip= "v6"
+
+" ----------------
+"  Functions: {{{1
+" ----------------
+
+" ---------------------------------------------------------------------
+" zip#Browse: {{{2
+fun! zip#Browse(zipfile)
+"  call Dfunc("zip#Browse(zipfile<".a:zipfile.">)")
+  let repkeep= &report
+  set report=10
+
+  " sanity checks
+  if !executable("unzip")
+   echohl Error | echo "***error*** (zip#Browse) unzip not available on your system"
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   let &report= repkeep
+"   call Dret("zip#Browse")
+   return
+  endif
+  if !filereadable(a:zipfile)
+   if a:zipfile !~# '^\a\+://'
+    " if its an url, don't complain, let url-handlers such as vim do its thing
+    echohl Error | echo "***error*** (zip#Browse) File not readable<".a:zipfile.">" | echohl None
+    call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   endif
+   let &report= repkeep
+"   call Dret("zip#Browse : file<".a:zipfile."> not readable")
+   return
+  endif
+  if &ma != 1
+   set ma
+  endif
+  let w:zipfile= a:zipfile
+
+  setlocal noswapfile
+  setlocal buftype=nofile
+  setlocal bufhidden=hide
+  setlocal nobuflisted
+  setlocal nowrap
+  set ft=tar
+
+  " give header
+  exe "$put ='".'\"'." zip.vim version ".g:loaded_zip."'"
+  exe "$put ='".'\"'." Browsing zipfile ".a:zipfile."'"
+  exe "$put ='".'\"'." Select a file with cursor and press ENTER"."'"
+  $put =''
+  0d
+  $
+
+  exe "silent r! unzip -l ".a:zipfile
+  $d
+  silent 4,$v/^\s\+\d\+\s\{0,5}\d/d
+  silent  4,$s/^\%(.*\)\s\+\(\S\)/\1/
+
+  setlocal noma nomod ro
+  noremap <silent> <buffer> <cr> :call <SID>ZipBrowseSelect()<cr>
+
+  let &report= repkeep
+"  call Dret("zip#Browse")
+endfun
+
+" ---------------------------------------------------------------------
+" ZipBrowseSelect: {{{2
+fun! s:ZipBrowseSelect()
+"  call Dfunc("ZipBrowseSelect() zipfile<".w:zipfile."> curfile<".expand("%").">")
+  let repkeep= &report
+  set report=10
+  let fname= getline(".")
+
+  " sanity check
+  if fname =~ '^"'
+   let &report= repkeep
+"   call Dret("ZipBrowseSelect")
+   return
+  endif
+  if fname =~ '/$'
+   echohl Error | echo "***error*** (zip#Browse) Please specify a file, not a directory" | echohl None
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   let &report= repkeep
+"   call Dret("ZipBrowseSelect")
+   return
+  endif
+
+"  call Decho("fname<".fname.">")
+
+  " get zipfile to the new-window
+  let zipfile= substitute(w:zipfile,'.zip$','','e')
+  let curfile= expand("%")
+
+  new
+  wincmd _
+  let s:zipfile_{winnr()}= curfile
+  exe "e zipfile:".zipfile.':'.fname
+  filetype detect
+
+  let &report= repkeep
+"  call Dret("ZipBrowseSelect : s:zipfile_".winnr()."<".s:zipfile_{winnr()}.">")
+endfun
+
+" ---------------------------------------------------------------------
+" zip#Read: {{{2
+fun! zip#Read(fname,mode)
+"  call Dfunc("zip#Read(fname<".a:fname.">,mode=".a:mode.")")
+  let repkeep= &report
+  set report=10
+
+  let zipfile = substitute(a:fname,'zipfile:\(.\{-}\):.*$','\1','')
+  let fname   = substitute(a:fname,'zipfile:.\{-}:\(.*\)$','\1','')
+"  call Decho("zipfile<".zipfile."> fname<".fname.">")
+
+  exe "r! unzip -p ".zipfile." ".fname
+
+  " cleanup
+  0d
+  set nomod
+
+  let &report= repkeep
+"  call Dret("zip#Read")
+endfun
+
+" ---------------------------------------------------------------------
+" zip#Write: {{{2
+fun! zip#Write(fname)
+"  call Dfunc("zip#Write(fname<".a:fname.") zipfile_".winnr()."<".s:zipfile_{winnr()}.">")
+  let repkeep= &report
+  set report=10
+
+  " sanity checks
+  if !executable("zip")
+   echohl Error | echo "***error*** (zip#Write) sorry, your system doesn't appear to have the zip pgm" | echohl None
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   let &report= repkeep
+"   call Dret("zip#Write")
+   return
+  endif
+  if !exists("*mkdir")
+   echohl Error | echo "***error*** (zip#Write) sorry, mkdir() doesn't work on your system" | echohl None
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   let &report= repkeep
+"   call Dret("zip#Write")
+   return
+  endif
+
+  let curdir= getcwd()
+  let tmpdir= tempname()
+"  call Decho("orig tempname<".tmpdir.">")
+  if tmpdir =~ '\.'
+   let tmpdir= substitute(tmpdir,'\.[^.]*$','','e')
+  endif
+"  call Decho("tmpdir<".tmpdir.">")
+  call mkdir(tmpdir,"p")
+
+  " attempt to change to the indicated directory
+  try
+   exe "cd ".escape(tmpdir,' \')
+  catch /^Vim\%((\a\+)\)\=:E344/
+   echohl Error | echo "***error*** (zip#Write) cannot cd to temporary directory" | Echohl None
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+   let &report= repkeep
+"   call Dret("zip#Write")
+   return
+  endtry
+"  call Decho("current directory now: ".getcwd())
+
+  " place temporary files under .../_ZIPVIM_/
+  if isdirectory("_ZIPVIM_")
+   call s:Rmdir("_ZIPVIM_")
+  endif
+  call mkdir("_ZIPVIM_")
+  cd _ZIPVIM_
+"  call Decho("current directory now: ".getcwd())
+
+  let zipfile = substitute(a:fname,'zipfile:\(.\{-}\):.*$','\1','')
+  let fname   = substitute(a:fname,'zipfile:.\{-}:\(.*\)$','\1','')
+
+  if fname =~ '/'
+   let dirpath = substitute(fname,'/[^/]\+$','','e')
+   if executable("cygpath")
+    let dirpath = substitute(system("cygpath ".dirpath),'\n','','e')
+   endif
+   call mkdir(dirpath,"p")
+  endif
+  if zipfile !~ '/'
+   let zipfile= curdir.'/'.zipfile
+  endif
+"  call Decho("zipfile<".zipfile."> fname<".fname.">")
+
+  exe "w! ".fname
+  if executable("cygpath")
+   let zipfile = substitute(system("cygpath ".zipfile),'\n','','e')
+  endif
+
+"  call Decho("zip -u ".zipfile.".zip ".fname)
+  call system("zip -u ".zipfile.".zip ".fname)
+  if v:shell_error != 0
+   echohl Error | echo "***error*** (zip#Write) sorry, unable to update ".zipfile." with ".fname | echohl None
+   call inputsave()|call input("Press <cr> to continue")|call inputrestore()
+
+  elseif s:zipfile_{winnr()} =~ '^\a\+://'
+   " support writing zipfiles across a network
+   let netzipfile= s:zipfile_{winnr()}
+"   call Decho("handle writing <".zipfile.".zip> across network as <".netzipfile.">")
+   1split|enew
+   let binkeep= &binary
+   let eikeep = &ei
+   set binary ei=all
+   exe "e! ".zipfile.".zip"
+   call netrw#NetWrite(netzipfile)
+   let &ei     = eikeep
+   let &binary = binkeep
+   q!
+   unlet s:zipfile_{winnr()}
+  endif
+  
+  " cleanup and restore current directory
+  cd ..
+  call s:Rmdir("_ZIPVIM_")
+  exe "cd ".escape(curdir,' \')
+  setlocal nomod
+
+  let &report= repkeep
+"  call Dret("zip#Write")
+endfun
+
+" ---------------------------------------------------------------------
+" Rmdir: {{{2
+fun! s:Rmdir(fname)
+"  call Dfunc("Rmdir(fname<".a:fname.">)")
+  if has("unix")
+   call system("/bin/rm -rf ".a:fname)
+  elseif has("win32") || has("win95") || has("win64") || has("win16")
+   if &shell =~? "sh$"
+    call system("/bin/rm -rf ".a:fname)
+   else
+    call system("del /S ".a:fname)
+   endif
+  endif
+"  call Dret("Rmdir")
+endfun
+
+" ------------------------------------------------------------------------
+" Modelines And Restoration: {{{1
+let &cpo= s:keepcpo
+unlet s:keepcpo
+" vim:ts=8 fdm=marker

runtime/bugreport.vim

@@ -2,7 +2,7 @@
 :" information about the environment of a possible bug in Vim.
 :"
 :" Maintainer:	Bram Moolenaar <Bram@vim.org>
-:" Last change:	2001 Feb 02
+:" Last change:	2005 Jun 12
 :"
 :" To use inside Vim:
 :"	:so $VIMRUNTIME/bugreport.vim
@@ -49,6 +49,8 @@
 :  call <SID>CheckFile($VIMRUNTIME . "/syntax/synload.vim")
 :  delfun <SID>CheckDir
 :  delfun <SID>CheckFile
+:  echo "--- Scripts sourced ---"
+:  scriptnames
 :endif
 :set all
 :set termcap

runtime/colors/darkblue.vim

@@ -1,6 +1,6 @@
 " Vim color file
 " Maintainer:	Bohdan Vlasyuk <bohdan@vstu.edu.ua>
-" Last Change:	2002 Mar 09
+" Last Change:	2005 Mar 28
 
 " darkblue -- for those who prefer dark background
 " [note: looks bit uglier with come terminal palettes,
@@ -32,31 +32,31 @@ hi MoreMsg			ctermfg=darkgreen	ctermfg=darkgreen
 hi Question			guifg=green gui=none ctermfg=green cterm=none
 hi NonText			guifg=#0030ff		ctermfg=darkblue
 
-hi StatusLine		guifg=blue guibg=darkgray gui=none		ctermfg=blue ctermbg=gray term=none cterm=none
-hi StatusLineNC		guifg=black guibg=darkgray gui=none		ctermfg=black ctermbg=gray term=none cterm=none
-hi VertSplit		guifg=black guibg=darkgray gui=none		ctermfg=black ctermbg=gray term=none cterm=none
+hi StatusLine	guifg=blue guibg=darkgray gui=none		ctermfg=blue ctermbg=gray term=none cterm=none
+hi StatusLineNC	guifg=black guibg=darkgray gui=none		ctermfg=black ctermbg=gray term=none cterm=none
+hi VertSplit	guifg=black guibg=darkgray gui=none		ctermfg=black ctermbg=gray term=none cterm=none
 
-hi Folded			guifg=#808080 guibg=#000040			ctermfg=darkgrey ctermbg=black cterm=bold term=bold
-hi FoldColumn		guifg=#808080 guibg=#000040			ctermfg=darkgrey ctermbg=black cterm=bold term=bold
-hi LineNr			guifg=#90f020			ctermfg=green cterm=none
+hi Folded	guifg=#808080 guibg=#000040			ctermfg=darkgrey ctermbg=black cterm=bold term=bold
+hi FoldColumn	guifg=#808080 guibg=#000040			ctermfg=darkgrey ctermbg=black cterm=bold term=bold
+hi LineNr	guifg=#90f020			ctermfg=green cterm=none
 
-hi DiffAdd			guibg=darkblue	ctermbg=darkblue term=none cterm=none
-hi DiffChange		guibg=darkmagenta ctermbg=magenta cterm=none
-hi DiffDelete		ctermfg=blue ctermbg=cyan gui=bold guifg=Blue guibg=DarkCyan
-hi DiffText			cterm=bold ctermbg=red gui=bold guibg=Red
+hi DiffAdd	guibg=darkblue	ctermbg=darkblue term=none cterm=none
+hi DiffChange	guibg=darkmagenta ctermbg=magenta cterm=none
+hi DiffDelete	ctermfg=blue ctermbg=cyan gui=bold guifg=Blue guibg=DarkCyan
+hi DiffText	cterm=bold ctermbg=red gui=bold guibg=Red
 
-hi Cursor			guifg=#000020 guibg=#ffaf38 ctermfg=bg ctermbg=brown
-hi lCursor			guifg=#ffffff guibg=#000000 ctermfg=bg ctermbg=darkgreen
+hi Cursor   	guifg=black guibg=yellow ctermfg=black ctermbg=yellow
+hi lCursor   	guifg=black guibg=white ctermfg=black ctermbg=white
 
 
-hi Comment			guifg=#80a0ff ctermfg=darkred
-hi Constant			ctermfg=magenta guifg=#ffa0a0 cterm=none
-hi Special			ctermfg=brown guifg=Orange cterm=none gui=none
-hi Identifier		ctermfg=cyan guifg=#40ffff cterm=none
-hi Statement		ctermfg=yellow cterm=none guifg=#ffff60 gui=none
-hi PreProc			ctermfg=magenta guifg=#ff80ff gui=none cterm=none
-hi type				ctermfg=green guifg=#60ff60 gui=none cterm=none
-hi Underlined		cterm=underline term=underline
-hi Ignore			guifg=bg ctermfg=bg
+hi Comment	guifg=#80a0ff ctermfg=darkred
+hi Constant	ctermfg=magenta guifg=#ffa0a0 cterm=none
+hi Special	ctermfg=brown guifg=Orange cterm=none gui=none
+hi Identifier	ctermfg=cyan guifg=#40ffff cterm=none
+hi Statement	ctermfg=yellow cterm=none guifg=#ffff60 gui=none
+hi PreProc	ctermfg=magenta guifg=#ff80ff gui=none cterm=none
+hi type		ctermfg=green guifg=#60ff60 gui=none cterm=none
+hi Underlined	cterm=underline term=underline
+hi Ignore	guifg=bg ctermfg=bg
 
 

runtime/compiler/ant.vim

@@ -1,7 +1,7 @@
 " Vim Compiler File
 " Compiler:	ant
 " Maintainer:	Johannes Zellner <johannes@zellner.org>
-" Last Change:	Tue, 27 Apr 2004 15:01:45 CEST
+" Last Change:	Mi, 13 Apr 2005 22:50:07 CEST
 
 if exists("current_compiler")
     finish
@@ -21,15 +21,15 @@ CompilerSet makeprg=ant
 "     ant with jikes +E, which assumes  the following
 "     two property lines in your 'build.xml':
 "
-"	  <property name = "build.compiler"	  value = "jikes"/>
-"	  <property name = "build.compiler.emacs" value = "true"/>
+"         <property name = "build.compiler"       value = "jikes"/>
+"         <property name = "build.compiler.emacs" value = "true"/>
 "
 " second line:
 "     ant with javac
 "
 " note that this will work also for tasks like [wtkbuild]
 "
-setlocal errorformat=\ %#[%.%#]\ %#%f:%l:%v:%*\\d:%*\\d:\ %t%[%^:]%#:%m,
+CompilerSet errorformat=\ %#[%.%#]\ %#%f:%l:%v:%*\\d:%*\\d:\ %t%[%^:]%#:%m,
     \%A\ %#[%.%#]\ %f:%l:\ %m,%-Z\ %#[%.%#]\ %p^,%C\ %#[%.%#]\ %#%m
 
 " ,%-C%.%#

runtime/compiler/bdf.vim

@@ -1,19 +1,13 @@
 " Vim compiler file
-" Compiler:	    BDF to PCF Conversion
-" Maintainer:	    Nikolai Weibull <sourc@pcppopper.org>
-" URL:		    http://www.pcppopper.org/vim/compiler/pcp/bdf/
-" Latest Revision:  2004-05-22
-" arch-tag:	    2e2f3a55-199b-468c-aa2e-d6b1a7b87806
+" Compiler:         BDF to PCF Conversion
+" Maintainer:       Nikolai Weibull <nikolai+work.vim@bitwi.se>
+" Latest Revision:  2005-06-29
 
 if exists("current_compiler")
   finish
 endif
 let current_compiler = "bdf"
 
-if exists(":CompilerSet") != 2          " older Vim always used :setlocal
-  command -nargs=* CompilerSet setlocal <args>
-endif
-
 let s:cpo_save = &cpo
 set cpo-=C
 
@@ -26,5 +20,3 @@ CompilerSet errorformat=%ABDF\ %trror\ on\ line\ %l:\ %m,
 
 let &cpo = s:cpo_save
 unlet s:cpo_save
-
-" vim: set sts=2 sw=2:

runtime/compiler/eruby.vim

@@ -0,0 +1,41 @@
+" Vim compiler file
+" Language:	eRuby
+" Maintainer:	Doug Kearns <djkea2 at gus.gscit.monash.edu.au>
+" Info:		$Id$
+" URL:		http://vim-ruby.rubyforge.org
+" Anon CVS:	See above site
+" ----------------------------------------------------------------------------
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "eruby"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo-=C
+
+if exists("eruby_compiler") && eruby_compiler == "eruby"
+  CompilerSet makeprg=eruby
+else
+  CompilerSet makeprg=erb
+endif
+
+CompilerSet errorformat=
+    \eruby:\ %f:%l:%m,
+    \%+E%f:%l:\ parse\ error,
+    \%W%f:%l:\ warning:\ %m,
+    \%E%f:%l:in\ %*[^:]:\ %m,
+    \%E%f:%l:\ %m,
+    \%-C%\tfrom\ %f:%l:in\ %.%#,
+    \%-Z%\tfrom\ %f:%l,
+    \%-Z%p^,
+    \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim: nowrap sw=2 sts=2 ts=8 ff=unix:

runtime/compiler/fpc.vim

@@ -0,0 +1,17 @@
+" Vim compiler file
+" Compiler:     FPC 2.1
+" Maintainer:   Jaroslaw Blasiok <jaro3000@o2.pl>
+" Last Change:  2005 October 07
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "fpc"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+" NOTE: compiler must be runned with -vb to write whole source path, not only file
+" name.
+CompilerSet errorformat=%f(%l\\,%c)\ %m

runtime/compiler/gcc.vim

@@ -0,0 +1,26 @@
+" Vim compiler file
+" Compiler:         GNU C Compiler
+" Maintainer:       Nikolai Weibull <nikolai+work.vim@bitwi.se>
+" Latest Revision:  2005-06-29
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "gcc"
+
+let s:cpo_save = &cpo
+set cpo-=C
+
+setlocal errorformat=
+      \%*[^\"]\"%f\"%*\\D%l:\ %m,
+      \\"%f\"%*\\D%l:\ %m,
+      \%-G%f:%l:\ %trror:\ (Each\ undeclared\ identifier\ is\ reported\ only\ once,
+      \%-G%f:%l:\ %trror:\ for\ each\ function\ it\ appears\ in.),
+      \%f:%l:\ %m,
+      \\"%f\"\\,\ line\ %l%*\\D%c%*[^\ ]\ %m,
+      \%D%*\\a[%*\\d]:\ Entering\ directory\ `%f',
+      \%X%*\\a[%*\\d]:\ Leaving\ directory\ `%f',
+      \%DMaking\ %*\\a\ in\ %f
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/hp_acc.vim

@@ -1,8 +1,8 @@
 " Vim compiler file
 " Compiler:	HP aCC
 " Maintainer:	Matthias Ulrich <matthias-ulrich@web.de>
-" URL:		http://www.subhome.de/vim/hp_acc.vim
-" Last Change:	2004 Mar 27
+" URL:          http://www.subhome.de/vim/hp_acc.vim
+" Last Change:	2005 Nov 19
 "
 "  aCC --version says: "HP ANSI C++ B3910B A.03.13"
 "  This compiler has been tested on:
@@ -10,6 +10,10 @@
 "
 "  Tim Brown's aCC is: "HP ANSI C++ B3910B A.03.33"
 "  and it also works fine...
+"  
+"  Now suggestions by aCC are supported (compile flag aCC +w).
+"  Thanks to Tim Brown again!!
+"  
 
 if exists("current_compiler")
   finish
@@ -21,6 +25,7 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
 endif
 
 CompilerSet errorformat=%A%trror\ %n\:\ \"%f\"\\,\ line\ %l\ \#\ %m,
+         \%A%tarning\ (suggestion)\ %n\:\ \"%f\"\\,\ line\ %l\ \#\ %m\ %#,
          \%A%tarning\ %n\:\ \"%f\"\\,\ line\ %l\ \#\ %m\ %#,
          \%Z\ \ \ \ %p^%.%#,
          \%-C%.%#

runtime/compiler/msvc.vim

@@ -1,17 +1,13 @@
 " Vim compiler file
 " Compiler:	Miscrosoft Visual C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2004 Mar 19
+" Last Change:	2005 Nov 30
 
 if exists("current_compiler")
   finish
 endif
 let current_compiler = "msvc"
 
-if exists(":CompilerSet") != 2		" older Vim always used :setlocal
-  command -nargs=* CompilerSet setlocal <args>
-endif
-
 " The errorformat for MSVC is the default.
 CompilerSet errorformat&
 CompilerSet makeprg=nmake

runtime/compiler/rst.vim

@@ -1,19 +1,13 @@
 " Vim compiler file
-" Compiler:	    reStructuredText Documentation Format
-" Maintainer:	    Nikolai Weibull <source@pcppopper.org>
-" URL:		    http://www.pcppopper.org/vim/compiler/pcp/rst/
-" Latest Revision:  2004-05-22
-" arch-tag:	    ac64a95a-5d45-493d-a9f9-f96fc8568657
+" Compiler:         reStructuredText Documentation Format
+" Maintainer:       Nikolai Weibull <nikolai+work.vim@bitwi.se>
+" Latest Revision:  2005-06-29
 
 if exists("current_compiler")
   finish
 endif
 let current_compiler = "rst"
 
-if exists(":CompilerSet") != 2          " older Vim always used :setlocal
-  command -nargs=* CompilerSet setlocal <args>
-endif
-
 let s:cpo_save = &cpo
 set cpo-=C
 
@@ -29,5 +23,3 @@ CompilerSet errorformat=
 
 let &cpo = s:cpo_save
 unlet s:cpo_save
-
-" vim: set sts=2 sw=2:

runtime/compiler/ruby.vim

@@ -1,12 +1,16 @@
 " Vim compiler file
-" Compiler:     Ruby syntax check and/or error reporting
-" Maintainer:   Tim Hammerquist <timmy@cpan.org>
-" Last Change:  Tue Jul 16 00:38:00 PDT 2002
+" Language:	Ruby
+" Function:	Syntax check and/or error reporting
+" Maintainer:	Tim Hammerquist <timh at rubyforge.org>
+" Info:		$Id$
+" URL:		http://vim-ruby.rubyforge.org
+" Anon CVS:	See above site
+" ----------------------------------------------------------------------------
 "
 " Changelog:
-" 0.2:  script saves and restores 'cpoptions' value to prevent problems with
-"       line continuations
-" 0.1:  initial release
+" 0.2:	script saves and restores 'cpoptions' value to prevent problems with
+"	line continuations
+" 0.1:	initial release
 "
 " Contributors:
 "   Hugh Sasse <hgs@dmu.ac.uk>
@@ -22,6 +26,7 @@
 "   This is my first experience with 'errorformat' and compiler plugins and
 "   I welcome any input from more experienced (or clearer-thinking)
 "   individuals.
+" ----------------------------------------------------------------------------
 
 if exists("current_compiler")
   finish
@@ -59,4 +64,4 @@ CompilerSet errorformat=
 let &cpo = s:cpo_save
 unlet s:cpo_save
 
-" vim: ft=vim
+" vim: nowrap sw=2 sts=2 ts=8 ff=unix:

runtime/compiler/rubyunit.vim

@@ -0,0 +1,35 @@
+" Vim compiler file
+" Language:	Test::Unit - Ruby Unit Testing Framework
+" Maintainer:	Doug Kearns <djkea2 at gus.gscit.monash.edu.au>
+" Info:		$Id$
+" URL:		http://vim-ruby.rubyforge.org
+" Anon CVS:	See above site
+" ----------------------------------------------------------------------------
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "rubyunit"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo-=C
+
+CompilerSet makeprg=testrb
+
+CompilerSet errorformat=\%W\ %\\+%\\d%\\+)\ Failure:,
+			\%C%m\ [%f:%l]:,
+			\%E\ %\\+%\\d%\\+)\ Error:,
+			\%C%m:,
+			\%C\ \ \ \ %f:%l:%.%#,
+			\%C%m,
+			\%Z\ %#,
+			\%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim: nowrap sw=2 sts=2 ts=8 ff=unix:

runtime/compiler/splint.vim

@@ -2,7 +2,7 @@
 " Compiler:     splint/lclint (C source code checker)
 " Maintainer:   Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
 " Splint Home:	http://www.splint.org/
-" Last Change:  2004 Oct 02
+" Last Change:  2005 Apr 21
 " $Revision$
 
 if exists("current_compiler")
@@ -53,6 +53,7 @@ CompilerSet makeprg=splint\ %
 
 CompilerSet errorformat=%OLCLint*m,
 	\%OSplint*m,
+	\%f(%l\\,%c):\ %m,
 	\%*[\ ]%f:%l:%c:\ %m,
 	\%*[\ ]%f:%l:\ %m,
 	\%*[^\"]\"%f\"%*\\D%l:\ %m,

runtime/doc/Makefile

@@ -19,6 +19,7 @@ DOCS = \
 	change.txt \
 	cmdline.txt \
 	debugger.txt \
+	debug.txt \
 	develop.txt \
 	diff.txt \
 	digraph.txt \
@@ -70,7 +71,10 @@ DOCS = \
 	pattern.txt \
 	pi_gzip.txt \
 	pi_netrw.txt \
+	pi_paren.txt \
 	pi_spec.txt \
+	pi_tar.txt \
+	pi_zip.txt \
 	print.txt \
 	quickfix.txt \
 	quickref.txt \
@@ -84,7 +88,9 @@ DOCS = \
 	sign.txt \
 	sponsor.txt \
 	starting.txt \
+	spell.txt \
 	syntax.txt \
+	tabpage.txt \
 	tagsrch.txt \
 	term.txt \
 	tips.txt \
@@ -138,6 +144,7 @@ HTMLS = \
 	autocmd.html \
 	change.html \
 	cmdline.html \
+	debug.html \
 	debugger.html \
 	develop.html \
 	diff.html \
@@ -190,6 +197,7 @@ HTMLS = \
 	pattern.html \
 	pi_gzip.html \
 	pi_netrw.html \
+	pi_paren.html \
 	pi_spec.html \
 	print.html \
 	quickfix.html \
@@ -204,7 +212,9 @@ HTMLS = \
 	sign.html \
 	sponsor.html \
 	starting.html \
+	spell.html \
 	syntax.html \
+	tabpage.html \
 	tagsrch.html \
 	tags.html \
 	term.html \
@@ -254,10 +264,27 @@ HTMLS = \
 	windows.html \
 	workshop.html
 
+CONVERTED = \
+	vim-fr.UTF-8.1 \
+	evim-fr.UTF-8.1 \
+	vimdiff-fr.UTF-8.1 \
+	vimtutor-fr.UTF-8.1 \
+	xxd-fr.UTF-8.1 \
+	vim-it.UTF-8.1 \
+	evim-it.UTF-8.1 \
+	vimdiff-it.UTF-8.1 \
+	vimtutor-it.UTF-8.1 \
+	xxd-it.UTF-8.1 \
+	vim-ru.UTF-8.1 \
+	evim-ru.UTF-8.1 \
+	vimdiff-ru.UTF-8.1 \
+	vimtutor-ru.UTF-8.1 \
+	xxd-ru.UTF-8.1 \
+
 .SUFFIXES:
 .SUFFIXES: .c .o .txt .html
 
-all: tags vim.man vimdiff.man vimtutor.man xxd.man
+all: tags vim.man vimdiff.man vimtutor.man xxd.man $(CONVERTED)
 
 # Use Vim to generate the tags file.  Can only be used when Vim has been
 # compiled and installed.  Supports multiple languages.
@@ -365,3 +392,49 @@ os_risc.txt:
 
 os_win32.txt:
 	touch os_win32.txt
+
+# Note that $< works with GNU make while $> works for BSD make.
+vim-fr.UTF-8.1: vim-fr.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+evim-fr.UTF-8.1: evim-fr.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+vimdiff-fr.UTF-8.1: vimdiff-fr.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+vimtutor-fr.UTF-8.1: vimtutor-fr.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+xxd-fr.UTF-8.1: xxd-fr.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+vim-it.UTF-8.1: vim-it.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+evim-it.UTF-8.1: evim-it.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+vimdiff-it.UTF-8.1: vimdiff-it.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+vimtutor-it.UTF-8.1: vimtutor-it.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+xxd-it.UTF-8.1: xxd-it.1
+	iconv -f latin1 -t utf-8 $< >$@
+
+vim-ru.UTF-8.1: vim-ru.1
+	iconv -f KOI8-R -t utf-8 $< >$@
+
+evim-ru.UTF-8.1: evim-ru.1
+	iconv -f KOI8-R -t utf-8 $< >$@
+
+vimdiff-ru.UTF-8.1: vimdiff-ru.1
+	iconv -f KOI8-R -t utf-8 $< >$@
+
+vimtutor-ru.UTF-8.1: vimtutor-ru.1
+	iconv -f KOI8-R -t utf-8 $< >$@
+
+xxd-ru.UTF-8.1: xxd-ru.1
+	iconv -f KOI8-R -t utf-8 $< >$@

runtime/doc/arabic.txt

@@ -1,4 +1,4 @@
-*arabic.txt*	For Vim version 7.0aa.  Last change: 2004 Jun 09
+*arabic.txt*	For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL	  by Nadim Shaikli
@@ -24,7 +24,7 @@ Introduction
 ------------
 Arabic is a rather demanding language in which a number of special
 features are required.	Characters are right-to-left oriented and
-ought to appear as such on the screen (ie. from right to left).
+ought to appear as such on the screen (i.e. from right to left).
 Arabic also requires shaping of its characters, meaning the same
 character has a different visual form based on its relative location
 within a word (initial, medial, final or stand-alone).	Arabic also
@@ -60,7 +60,7 @@ o  Changing keyboard mapping and reverse insert modes using a single
 
 o  Toggling complete Arabic support via a single command.
 
-o  While in Arabic mode, numbers are entered from left to right. Upon
+o  While in Arabic mode, numbers are entered from left to right.  Upon
    entering a none number character, that character will be inserted
    just into the left of the last number.
 
@@ -101,14 +101,14 @@ need to be accounted for and invoked.
 
 o  Setting the Arabic fonts
 
-   +  For VIM GUI set the 'guifont' to your_ARABIC_FONT. This is done
+   +  For VIM GUI set the 'guifont' to your_ARABIC_FONT.  This is done
       by entering the following command in the VIM window.
 >
 		:set guifont=your_ARABIC_FONT
 <
       NOTE: the string 'your_ARABIC_FONT' is used to denote a complete
-	    font name akin to that used in linux/unix system.
-	    (eg. -misc-fixed-medium-r-normal--20-200-75-75-c-100-iso10646-1)
+	    font name akin to that used in Linux/Unix systems.
+	    (e.g. -misc-fixed-medium-r-normal--20-200-75-75-c-100-iso10646-1)
 
       You can append the 'guifont' set command to your .vimrc file
       in order to get the same above noted results.  In other words,
@@ -179,11 +179,11 @@ o  Enable Arabic settings [short-cut]
 
    If, on the other hand, you'd like to be verbose and explicit and
    are opting not to use the 'arabic' short-cut command, here's what
-   is needed (ie. if you use ':set arabic' you can skip this section) -
+   is needed (i.e. if you use ':set arabic' you can skip this section) -
 
    +  Arabic Keymapping Activation
 
-      To activate the Arabic keymap (ie. to remap your English/Latin
+      To activate the Arabic keymap (i.e. to remap your English/Latin
       keyboard to look-n-feel like a standard Arabic one), set the
       'keymap' command to "arabic".  This is done by entering
 >
@@ -197,14 +197,14 @@ o  Enable Arabic settings [short-cut]
       default mapping (English), it is advised that users use the 'CTRL-^'
       key press while in insert (or add/replace) mode.	The command-line
       will display your current mapping by displaying an "Arabic" string
-      next to your insertion mode (eg. -- INSERT Arabic --) indicating
+      next to your insertion mode (e.g. -- INSERT Arabic --) indicating
       your current keymap.
 
    +  Arabic deletion of a combined pair character
 
       By default VIM has the 'delcombine' option disabled.  This option
       allows the deletion of ALEF in a LAM_ALEF (LAA) combined character
-      and still retain the LAM (ie. it reverts to treating the combined
+      and still retain the LAM (i.e. it reverts to treating the combined
       character as its natural two characters form -- this also pertains
       to harakat and their combined forms).  You can enable this option
       by entering
@@ -227,7 +227,7 @@ o  Enable Arabic settings [short-cut]
       - While in Left-to-right mode, enter ':set rl' in the command line
 	('rl' is the abbreviation for rightleft).
 
-      - Put the ':set rl' line in your '.vimrc' file to start the VIM in
+      - Put the ':set rl' line in your '.vimrc' file to start Vim in
 	right-to-left mode permanently.
 
    +  Arabic right-to-left command-line Mode
@@ -295,7 +295,7 @@ Restrictions
 ------------
 
 o  VIM in its GUI form does not currently support Bi-directionality
-   (ie. the ability to see both Arabic and Latin intermixed within
+   (i.e. the ability to see both Arabic and Latin intermixed within
    the same line).
 
 
@@ -304,7 +304,7 @@ Known Bugs
 
 There is one known minor bug,
 
- 1. If you insert a haraka (eg. Fatha (U+064E)) after a LAM (U+0644)
+ 1. If you insert a haraka (e.g. Fatha (U+064E)) after a LAM (U+0644)
     and then insert an ALEF (U+0627), the appropriate combining will
     not happen due to the sandwiched haraka resulting in something
     that will NOT be displayed correctly.
@@ -320,4 +320,3 @@ There is one known minor bug,
 No other bugs are known to exist.
 
  vim:tw=78:ts=8:ft=help:norl:
-

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 7.0aa.  Last change: 2005 Jan 14
+*change.txt*    For Vim version 7.0aa.  Last change: 2006 Feb 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -19,6 +19,7 @@ commands with the "." command.
    4.4 Changing tabs		   |change-tabs|
 5. Copying and moving text	|copy-move|
 6. Formatting text		|formatting|
+7. Sorting text			|sorting|
 
 For inserting text see |insert.txt|.
 
@@ -52,6 +53,8 @@ For inserting text see |insert.txt|.
 			of the line and [count]-1 more lines [into register
 			x]; synonym for "d$".
 			(not |linewise|)
+			When the '#' flag is in 'cpoptions' the count is
+			ignored.
 
 {Visual}["x]x	or					*v_x* *v_d* *v_<Del>*
 {Visual}["x]d   or
@@ -110,19 +113,22 @@ gJ			Join [count] lines, with a minimum of two lines.
 			Vi}
 
 							*:j* *:join*
-:[range]j[oin][!]	Join [range] lines.  Same as "J", except with [!]
+:[range]j[oin][!] [flags]
+			Join [range] lines.  Same as "J", except with [!]
 			the join does not insert or delete any spaces.
 			If a [range] has equal start and end values, this
 			command does nothing.  The default behavior is to
 			join the current line with the line below it.
 			{not in Vi: !}
+			See |ex-flags| for [flags].
 
-:[range]j[oin][!] {count}
+:[range]j[oin][!] {count} [flags]
 			Join {count} lines, starting with [range] (default:
 			current line |cmdline-ranges|).  Same as "J", except
 			with [!] the join does not insert or delete any
 			spaces.
 			{not in Vi: !}
+			See |ex-flags| for [flags].
 
 These commands delete the <EOL> between lines.  This has the effect of joining
 multiple lines into one line.  You can repeat these commands (except ":j") and
@@ -234,10 +240,12 @@ If you prefer "cw" to include the space after a word, use this mapping: >
 	:map cw dwi
 <
 							*:c* *:ch* *:change*
-:{range}c[hange]	Replace lines of text with some different text.
+:{range}c[hange][!]	Replace lines of text with some different text.
 			Type a line containing only "." to stop replacing.
 			Without {range}, this command changes only the current
 			line.
+			Adding [!] toggles 'autoindent' for the time this
+			command is executed.
 
 ==============================================================================
 3. Simple changes					*simple-change*
@@ -422,12 +430,15 @@ SHIFTING LINES LEFT OR RIGHT				*shift-left-right*
 			lines to [indent] (default 0).  {not in Vi}
 
 							*:>*
-:[range]>		Shift {count} [range] lines one 'shiftwidth' right.
+:[range]> [flags]	Shift {count} [range] lines one 'shiftwidth' right.
 			Repeat '>' for shifting multiple 'shiftwidth's.
+			See |ex-flags| for [flags].
 
-:[range]> {count}	Shift {count} lines one 'shiftwidth' right, starting
+:[range]> {count} [flags]
+			Shift {count} lines one 'shiftwidth' right, starting
 			with [range] (default current line |cmdline-ranges|).
 			Repeat '>' for shifting multiple 'shiftwidth's.
+			See |ex-flags| for [flags].
 
 The ">" and "<" commands are handy for changing the indentation within
 programs.  Use the 'shiftwidth' option to set the size of the white space
@@ -492,6 +503,8 @@ comment (starting with '"') after the ":!" command.
 			temporary file and then reads the file into the
 			buffer.  Vim uses the 'shellredir' option to redirect
 			the filter output to the temporary file.
+			However, if the 'shelltemp' option is off then pipes
+			are used when possible (on Unix).
 			When the 'R' flag is included in 'cpoptions' marks in
 			the filtered lines are deleted, unless the
 			|:keepmarks| command is used.  Example: >
@@ -517,7 +530,7 @@ comment (starting with '"') after the ":!" command.
 
 4.2 Substitute						*:substitute*
 							*:s* *:su*
-:[range]s[ubstitute]/{pattern}/{string}/[&][c][e][g][p][r][i][I] [count]
+:[range]s[ubstitute]/{pattern}/{string}/[flags] [count]
 			For each line in [range] replace a match of {pattern}
 			with {string}.
 			For the {pattern} see |pattern|.
@@ -529,31 +542,31 @@ comment (starting with '"') after the ":!" command.
 			starting with the last line in [range].  When [range]
 			is omitted start in the current line.
 			Also see |cmdline-ranges|.
-			See |:s_flags| for the flags.
+			See |:s_flags| for [flags].
 
-:[range]s[ubstitute] [c][e][g][p][r][i][I] [count]
-:[range]&[&][c][e][g][p][r][i][I] [count]			*:&*
+:[range]s[ubstitute] [flags] [count]
+:[range]&[&][flags] [count]					*:&*
 			Repeat last :substitute with same search pattern and
 			substitute string, but without the same flags.  You
-			may add extra flags (see |:s_flags|).
+			may add [flags], see |:s_flags|.
 			Note that after ":substitute" the '&' flag can't be
 			used, it's recognized as a pattern separator.
 			The space between ":substitute" and the 'c', 'g' and
 			'r' flags isn't required, but in scripts it's a good
 			idea to keep it to avoid confusion.
 
-:[range]~[&][c][e][g][p][r][i][I] [count]			*:~*
+:[range]~[&][flags] [count]					*:~*
 			Repeat last substitute with same substitute string
 			but with last used search pattern.  This is like
-			":&r".  See |:s_flags| for the flags.
+			":&r".  See |:s_flags| for [flags].
 
-						*&*
+								*&*
 &			Synonym for ":s//~/" (repeat last substitute).  Note
 			that the flags are not remembered, thus it might
 			actually work differently.  You can use ":&&" to keep
 			the flags.
 
-						*g&*
+								*g&*
 g&			Synonym for ":%s//~/&" (repeat last substitute on all
 			lines with the same flags).
 			Mnemonic: global substitute. {not in Vi}
@@ -619,8 +632,15 @@ The flags that you can use for the substitute commands:
 	options are not used.
 	{not in Vi}
 
+[n]	Report the number of matches, do not actually substitute.  The [c]
+	flag is ignored.  The matches are reported as if 'report' is zero.
+	Useful to |count-items|.
+
 [p]	Print the line containing the last substitute.
-	{not in Vi}
+
+[#]	Like [p] and prepend the line number.
+
+[l]	Like [l] but print the text like |:list|.
 
 [r]	Only useful in combination with ":&" or ":s" without arguments.  ":&r"
 	works the same way as ":~":  When the search pattern is empty, use the
@@ -664,8 +684,11 @@ For the definition of a pattern, see |pattern|.
 
 					*sub-replace-special* *:s\=*
 When the {string} starts with "\=" it is evaluated as an expression, see
-|sub-replace-expression|.  Otherwise these characters in {string} have a
-special meaning:
+|sub-replace-expression|.  You can use that for any special characters.
+Otherwise these characters in {string} have a special meaning:
+								*:s%*
+When {string} is equal to "%" and '/' is included with the 'cpotions' option,
+then the {string} of the previous substitute command is used. |cpo-/|
 
 magic	nomagic	  action    ~
   &	  \&	  replaced with the whole matched pattern	     *s/\&*
@@ -728,8 +751,8 @@ either the first or second pattern in parentheses did not match, so either
 <
 
 Substitute with an expression			*sub-replace-expression*
-
-When the substitute string starts with "\=" the remainer is interpreted as an
+						*sub-replace-\=*
+When the substitute string starts with "\=" the remainder is interpreted as an
 expression.  This does not work recursively: a substitute() function inside
 the expression cannot use "\=" for the substitute string.
 
@@ -750,9 +773,12 @@ Be careful: The separation character must not appear in the expression!
 Consider using a character like "@" or ":".  There is no problem if the result
 of the expression contains the separation character.
 
-Example: >
+Examples: >
 	:s@\n@\="\r" . expand("$HOME") . "\r"@
-This replaces an end-of-line with a new line containing the value of $HOME.
+This replaces an end-of-line with a new line containing the value of $HOME. >
+
+	s/E/\="\<Char-0x20ac>"/g
+This replaces 'E' characters with an euro sign. Read more in |<Char->|.
 
 
 4.3 Search and replace					*search-replace*
@@ -895,6 +921,8 @@ inside of strings can change!  Also see 'softtabstop' option. >
 			current line).  This always works |linewise|, thus
 			this command can be used to put a yanked block as new
 			lines.
+			The cursor is left on the first non-blank in the last
+			new line.
 			The register can also be '=' followed by an optional
 			expression.  The expression continues until the end of
 			the command.  You need to escape the '|' and '"'
@@ -944,9 +972,9 @@ When using a put command like |p| or |P| in Visual mode, Vim will try to
 replace the selected text with the contents of the register.  Whether this
 works well depends on the type of selection and the type of the text in the
 register.  With blockwise selection it also depends on the size of the block
-and whether the corners are on an existing character. (implementation detail:
+and whether the corners are on an existing character.  (Implementation detail:
 it actually works by first putting the register after the selection and then
-deleting the selection).
+deleting the selection.)
 
 							*blockwise-register*
 If you use a blockwise Visual mode command to get the text into the register,
@@ -1017,7 +1045,8 @@ except when the command specifies a register with ["x].
 4. Named registers "a to "z or "A to "Z			*quote_alpha* *quotea*
 Vim fills these registers only when you say so.  Specify them as lowercase
 letters to replace their previous contents or as uppercase letters to append
-to their previous contents.
+to their previous contents.  When the '>' flag is present in 'cpoptions' then
+a line break is inserted before the appended text.
 
 5. Read-only registers ":, "., "% and "#
 These are '%', '#', ':' and '.'.  You can use them only with the "p", "P",
@@ -1050,14 +1079,18 @@ normal command-line editing commands are available, including a special
 history for expressions.  When you end the command-line by typing <CR>, Vim
 computes the result of the expression.  If you end it with <Esc>, Vim abandons
 the expression.  If you do not enter an expression, Vim uses the previous
-expression (like with the "/" command).  If the "= register is used for the
-"p" command, the string is split up at <NL> characters.  If the string ends in
-a <NL>, it is regarded as a linewise register.  {not in Vi}
+expression (like with the "/" command).  The expression must evaluate to a
+string.  If the result is a number it's turned into a string.  A List,
+Dictionary or FuncRef results in an error message (use string() to convert).
+If the "= register is used for the "p" command, the string is split up at <NL>
+characters.  If the string ends in a <NL>, it is regarded as a linewise
+register.  {not in Vi}
 
 7. Selection and drop registers "*, "+ and "~ 
 Use these register for storing and retrieving the selected text for the GUI.
 See |quotestar| and |quoteplus|.  When the clipboard is not available or not
-working, the unnamed register is used instead.  {not in Vi}
+working, the unnamed register is used instead.  For Unix systems the clipboard
+is only available when the |+xterm_clipboard| feature is present.  {not in Vi}
 
 Note that there is only a distinction between "* and "+ for X11 systems.  For
 an explanation of the difference, see |x11-selection|.  Under MS-Windows, use
@@ -1134,13 +1167,23 @@ The next three commands always work on whole lines.
 			compile time.
 
 							*gq*
-gq{motion}		Format the lines that {motion} moves over.  The
-			'textwidth' option controls the length of each
-			formatted line (see below).  If the 'textwidth' option
-			is 0, the formatted line length is the screen width
-			(with a maximum width of 79).  {not in Vi}
+gq{motion}		Format the lines that {motion} moves over.
+			Formatting is done with one of three methods:
+			1. If 'formatexpr' is not empty the expression is
+			   evaluated.  This can differ for each buffer.
+			2. If 'formatprg' is not empty an external program
+			   is used.
+			3. Otherise formatting is done internally.
+
+			In the third case the 'textwidth' option controls the
+			length of each formatted line (see below).
+			If the 'textwidth' option is 0, the formatted line
+			length is the screen width (with a maximum width of
+			79).
 			The 'formatoptions' option controls the type of
 			formatting |fo-table|.
+			The cursor is left on the first non-blank of the last
+			formatted line.
 			NOTE: The "Q" command formerly performed this
 			function.  If you still want to use "Q" for
 			formatting, use this mapping: >
@@ -1156,8 +1199,8 @@ gqq			Format the current line.  {not in Vi}
 							*gw*
 gw{motion}		Format the lines that {motion} moves over.  Similar to
 			|gq| but puts the cursor back at the same position in
-			the text.  However, 'formatprg' is not used.
-			{not in Vi}
+			the text.  However, 'formatprg' and 'formatexpr' are
+			not used.  {not in Vi}
 
 gwgw							*gwgw* *gww*
 gww			Format the current line as with "gw".  {not in Vi}
@@ -1188,9 +1231,10 @@ white space!).
 
 The 'joinspaces' option is used when lines are joined together.
 
-You can set the 'formatprg' option to the name of an external program for Vim
-to use for text formatting.  The 'textwidth' and other options have no effect
-on formatting by an external program.
+You can set the 'formatexpr' option to an expression or the 'formatprg' option
+to the name of an external program for Vim to use for text formatting.  The
+'textwidth' and other options have no effect on formatting by an external
+program.
 
 							*right-justify*
 There is no command in Vim to right justify text.  You can do it with
@@ -1392,7 +1436,7 @@ If the 'comments' option includes "/*", "*" and/or "*/", then Vim has some
 built in stuff to treat these types of comments a bit more cleverly.
 Opening a new line before or after "/*" or "*/" (with 'r' or 'o' present in
 'formatoptions') gives the correct start of the line automatically.  The same
-happens with formatting and auto-wrapping. Opening a line after a line
+happens with formatting and auto-wrapping.  Opening a line after a line
 starting with "/*" or "*" and containing "*/", will cause no comment leader to
 be inserted, and the indent of the new line is taken from the line containing
 the start of the comment.
@@ -1452,5 +1496,57 @@ And a few warnings:
 
 - Formatting a long paragraph and/or with complicated indenting may be slow.
 
+==============================================================================
+7. Sorting text						*sorting*
+
+Vim has a sorting function and a sorting command.  The sorting function can be
+found here: |sort()|.
+
+							*:sor* *:sort*
+:[range]sor[t][!] [i][u][n][x][o] [/{pattern}/]
+			Sort lines in [range].  When no range is given all
+			lines are sorted.
+
+			With [!] the order is reversed.
+
+			With [i] case is ignored.
+
+			With [n] sorting is done on the first decimal number
+			in the line (after a {pattern} match).
+
+			With [x] sorting is done on the first hexadecimal
+			number in the line (after a {pattern} match).  A
+			leading "0x" or "0X" is ignored.
+
+			With [o] sorting is done on the first octal number in
+			the line (after a {pattern} match).
+
+			With [u] only keep the first of a sequence of
+			identical lines (ignoring case when [i] is used).
+			Note that leading and trailing white space may cause
+			lines to be different.
+
+			When /{pattern}/ is specified the text matched with
+			{pattern} is skipped, so that you sort on what comes
+			after the match.  For lines without a match sorting
+			starts in the first column (e.g., for empty lines).
+			Instead of the slash any non-letter can be used.
+			For example, to sort on the second comma-separated
+			field: >
+				:sort /[^,]*,/
+<			To sort on the text at virtual column 10 (thus
+			ignoring the difference between tabs and spaces): >
+				:sort /.*\%10v/
+<
+Note that using ":sort" with ":global" doesn't sort the matching lines, it's
+quite useless.
+
+The details about sorting depend on the library function used.  There is no
+guarantee that sorting is "stable" or obeys the current locale.  You will have
+to try it out.
+
+The sorting itself cannot be interrupted, because of using a system library
+function.  You can interrupt the preparation (for undo) and putting the sorted
+lines into the buffer.  In the last case you may end up with duplicated lines.
 
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 7.0aa.  Last change: 2005 Jan 13
+*cmdline.txt*   For Vim version 7.0aa.  Last change: 2006 Feb 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -17,8 +17,9 @@ Basic command line editing is explained in chapter 20 of the user manual
 2. Command-line completion	|cmdline-completion|
 3. Ex command-lines		|cmdline-lines|
 4. Ex command-line ranges	|cmdline-ranges|
-5. Ex special characters	|cmdline-special|
-6. Command-line window		|cmdline-window|
+5. Ex command-line flags	|ex-flags|
+6. Ex special characters	|cmdline-special|
+7. Command-line window		|cmdline-window|
 
 ==============================================================================
 1. Command-line editing					*cmdline-editing*
@@ -152,6 +153,9 @@ CTRL-R {0-9a-z"%#:-=.}					*c_CTRL-R* *c_<C-R>*
 							*c_CTRL-R_=*
 			'='	the expression register: you are prompted to
 				enter an expression (see |expression|)
+				(doesn't work at the expression prompt; some
+				things such as changing the buffer or current
+				window are not allowed to avoid side effects)
 		See |registers| about registers.  {not in Vi}
 		Implementation detail: When using the |expression| register
 		and invoking setcmdpos(), this sets the position before
@@ -190,10 +194,13 @@ CTRL-\ e {expr}						*c_CTRL-\_e*
 		to finish it.  It's most useful in mappings though.  See
 		|expression|.
 		See |c_CTRL-R_=| for inserting the result of an expression.
-		Useful functions are |getcmdline()| and |getcmdpos()|.
+		Useful functions are |getcmdtype()|, |getcmdline()| and
+		|getcmdpos()|.
 		The cursor position is unchanged, except when the cursor was
 		at the end of the line, then it stays at the end.
 		|setcmdpos()| can be used to set the cursor position.
+		The |sandbox| is used for evaluating the expression to avoid
+		nasty side effects.
 		Example: >
 			:cmap <F7> <C-\>eAppendSome()<CR>
 			:func AppendSome()
@@ -202,7 +209,9 @@ CTRL-\ e {expr}						*c_CTRL-\_e*
 			   :call setcmdpos(strlen(cmd))
 			   :return cmd
 			:endfunc
-<
+<		This doesn't work recursively, thus not when already editing
+		an expression.
+
 							*c_CTRL-Y*
 CTRL-Y		When there is a modeless selection, copy the selection into
 		the clipboard. |modeless-selection|
@@ -470,6 +479,7 @@ followed by another command:
     :global
     :help
     :helpfind
+    :lcscope
     :make
     :normal
     :perl
@@ -557,7 +567,7 @@ argument for the command, which has a different meaning.  For example:
 			"name"
 
 ==============================================================================
-4. Ex command-line ranges	*cmdline-ranges* *[range]* *E16* *E493*
+4. Ex command-line ranges	*cmdline-ranges* *[range]* *E16*
 
 Some Ex commands accept a line range in front of them.  This is noted as
 [range].  It consists of one or more line specifiers, separated with ',' or
@@ -643,11 +653,15 @@ When folds are active the line numbers are rounded off to include the whole
 closed fold.  See |fold-behavior|.
 
 
-Reverse Range
+Reverse Range						*E493*
 
 A range should have the lower line number first.  If this is not the case, Vim
-will ask you if it should swap the line numbers.  This is not done within the
-global command ":g".
+will ask you if it should swap the line numbers. 
+	Backwards range given, OK to swap ~
+This is not done within the global command ":g".
+
+You can use ":silent" before a command to avoid the question, the range will
+always be swapped then.
 
 
 Count and Range						*N:*
@@ -668,7 +682,26 @@ Visual Mode and Range					*v_:*
 		lines.
 
 ==============================================================================
-5. Ex special characters				*cmdline-special*
+5. Ex command-line flags				*ex-flags*
+
+These flags are supported by a selection of Ex commands.  They print the line
+that the cursor ends up after executing the command:
+
+	l	output like for |:list|
+	#	add line number
+	p	output like for |:print|
+
+The flags can be combined, thus "l#" uses both a line number and |:list| style
+output.
+
+==============================================================================
+6. Ex special characters				*cmdline-special*
+
+Note: These are special characters in the executed command line.  If you want
+to insert special things while typing you can use the CTRL-R command.  For
+example, "%" stands for the current file name, while CTRL-R % inserts the
+current file name right away.  See |c_CTRL-R|.
+
 
 In Ex commands, at places where a file name can be used, the following
 characters have a special meaning.  These can also be used in the expression
@@ -712,9 +745,9 @@ Note: these are typed literally, they are not special keys!
 		   effective buffer number (for ":r file" it is the current
 		   buffer, the file being read is not in a buffer).
 	<amatch>   when executing autocommands, is replaced with the match for
-		   which this autocommand was executed.  It differs form
+		   which this autocommand was executed.  It differs from
 		   <afile> only when the file name isn't used to match with
-		   (for FileType and Syntax events).
+		   (for FileType, Syntax and SpellFileMissing events).
 	<sfile>    when executing a ":source" command, is replaced with the
 		   file name of the sourced file;
 		   when executing a function, is replaced with

runtime/doc/debug.txt

@@ -0,0 +1,70 @@
+*debug.txt*     For Vim version 7.0aa.  Last change: 2005 Dec 17
+
+
+		  VIM REFERENCE MANUAL    by Bram Moolenaar
+
+
+Debugging Vim						*debug-vim*
+
+This is for debugging Vim itself, when it doesn't work properly.
+For debugging Vim scripts, functions, etc. see |debug-scripts|
+
+1. Location of a crash, using gcc and gdb	|debug-gcc|
+2. Windows Bug Reporting               		|debug-win32|
+
+==============================================================================
+
+1. Location of a crash, using gcc and gdb		*debug-gcc*
+
+When Vim crashes in one of the test files, and you are using gcc for
+compilation, here is what you can do to find out exactly where Vim crashes.
+This also applies when using the MingW tools.
+
+1. Compile Vim with the "-g" option (there is a line in the Makefile for this,
+   which you can uncomment).
+
+2. Execute these commands (replace "11" with the test that fails): >
+	cd testdir
+	gdb ../vim
+	run -u unix.vim -U NONE -s dotest.in test11.in
+
+3. Check where Vim crashes, gdb should give a message for this.
+
+4. Get a stack trace from gdb with this command: >
+	where
+<  You can check out different places in the stack trace with: >
+	frame 3
+<  Replace "3" with one of the numbers in the stack trace.
+
+==============================================================================
+
+2. Windows Bug Reporting                       		*debug-win32*
+
+If the Windows version of Vim crashes in a reproducible manner,
+you can take some steps to provide a useful bug report.
+
+First, you must obtain the debugger symbols (PDB) file for your executable:
+gvim.pdb for gvim.exe, or vim.pdb for vim.exe. It should be available
+from the same place that you obtained the executable. Be sure to use
+the PDB that matches the EXE.
+
+If you built the executable yourself with the Microsoft Visual C++ compiler,
+then the PDB was built with the EXE.
+
+You can download the Microsoft Visual C++ Toolkit from
+    http://msdn.microsoft.com/visualc/vctoolkit2003/
+This contains the command-line tools, but not the Visual Studio IDE.
+
+The Debugging Tools for Windows can be downloaded from
+    http://www.microsoft.com/whdc/devtools/debugging/default.mspx
+This includes the WinDbg debugger.
+
+If you have Visual Studio, use that instead of the VC Toolkit
+and WinDbg.
+
+For other compilers, you should always use the corresponding debugger: TD for
+a Vim executable compiled with the Borland compiler; gdb (see above
+|debug-gcc|) for the Cygwin and MinGW compilers.
+
+=========================================================================
+ vim:tw=78:ts=8:ft=help:norl:

runtime/doc/debugger.txt

@@ -1,4 +1,4 @@
-*debugger.txt*  For Vim version 7.0aa.  Last change: 2001 Dec 22
+*debugger.txt*  For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -27,19 +27,19 @@ Environment (IDE):
 
 These features were added specifically for use in the Motif version of gvim.
 However, the |alt-input| and |debug-highlight| were written to be usable in
-both vim and gvim. Some of the other features could be used in the non-GUI
-vim with slight modifications. However, I did not do this nor did I test the
+both vim and gvim.  Some of the other features could be used in the non-GUI
+vim with slight modifications.  However, I did not do this nor did I test the
 reliability of building for vim or non Motif GUI versions.
 
 
 1.1 Alternate Command Input				*alt-input*
 
 For Vim to work with a debugger there must be at least an input connection
-with a debugger or external tool. In many cases there will also be an output
+with a debugger or external tool.  In many cases there will also be an output
 connection but this isn't absolutely necessary.
 
 The purpose of the input connection is to let the external debugger send
-commands to Vim. The commands sent by the debugger should give the debugger
+commands to Vim.  The commands sent by the debugger should give the debugger
 enough control to display the current debug environment and state.
 
 The current implementation is based on the X Toolkit dispatch loop and the
@@ -49,15 +49,15 @@ XtAddInput() function call.
 1.2 Debug Signs						*debug-signs*
 
 Many debuggers mark specific lines by placing a small sign or color highlight
-on the line. The |:sign| command lets the debugger set this graphic mark. Some
+on the line.  The |:sign| command lets the debugger set this graphic mark.  Some
 examples where this feature would be used would be a debugger showing an arrow
-representing the Program Counter (PC) of the program being debugged. Another
-example would be a small stop sign for a line with a breakpoint. These visible
+representing the Program Counter (PC) of the program being debugged.  Another
+example would be a small stop sign for a line with a breakpoint.  These visible
 highlights let the user keep track of certain parts of the state of the
 debugger.
 
-This feature can be used with more than debuggers, too. An IPE can use a sign
-to highlight build errors, searched text, or other things. The sign feature
+This feature can be used with more than debuggers, too.  An IPE can use a sign
+to highlight build errors, searched text, or other things.  The sign feature
 can also work together with the |debug-highlight| to ensure the mark is
 highly visible.
 
@@ -66,17 +66,17 @@ Debug signs are defined and placed using the |:sign| command.
 
 1.3 Debug Source Highlight				*debug-highlight*
 
-This feature allows a line to have a predominant highlight. The highlight is
-intended to make a specific line stand out. The highlight could be made to
+This feature allows a line to have a predominant highlight.  The highlight is
+intended to make a specific line stand out.  The highlight could be made to
 work for both vim and gvim, whereas the debug sign is, in most cases, limited
-to gvim. The one exception to this is Sun Microsystem's dtterm. The dtterm
+to gvim.  The one exception to this is Sun Microsystem's dtterm.  The dtterm
 from Sun has a "sign gutter" for showing signs.
 
 
 1.4 Message Footer					*gui-footer*
 
-The message footer can be used to display messages from a debugger or IPE. It
-can also be used to display menu and toolbar tips. The footer area is at the
+The message footer can be used to display messages from a debugger or IPE.  It
+can also be used to display menu and toolbar tips.  The footer area is at the
 bottom of the GUI window, below the line used to display colon commands.
 
 The display of the footer is controlled by the 'guioptions' letter 'F'.
@@ -85,30 +85,33 @@ The display of the footer is controlled by the 'guioptions' letter 'F'.
 1.5 Balloon Evaluation					*balloon-eval*
 
 This feature allows a debugger, or other external tool, to display dynamic
-information based on where the mouse is pointing. The purpose of this feature
+information based on where the mouse is pointing.  The purpose of this feature
 was to allow Sun's Visual WorkShop debugger to display expression evaluations.
 However, the feature was implemented in as general a manner as possible and
 could be used for displaying other information as well.
 
-The Balloon Evaluation has some settable parameters too.  The font list and
-colors can be set via X resources (XmNballoonEvalFontList,
+The Balloon Evaluation has some settable parameters too.  For Motif the font
+list and colors can be set via X resources (XmNballoonEvalFontList,
 XmNballoonEvalBackground, and XmNballoonEvalForeground).
 The 'balloondelay' option sets the delay before an attempt is made to show a
 balloon.
 The 'ballooneval' option needs to be set to switch it on.
 
 Balloon evaluation is only available when compiled with the |+balloon_eval|
-and |+sun_workshop| features.
+feature.
 
 The Balloon evaluation functions are also used to show a tooltip for the
 toolbar.  The 'ballooneval' option does not need to be set for this.  But the
 other settings apply.
 
+Another way to use the balloon is with the 'balloonexpr' option.  This is
+completely user definable.
+
 ==============================================================================
 2. Vim Compile Options					*debugger-compilation*
 
 The debugger features were added explicitly for use with Sun's Visual
-WorkShop Integrated Programming Environment (ipe). However, they were done
+WorkShop Integrated Programming Environment (ipe).  However, they were done
 in as generic a manner as possible so that integration with other debuggers
 could also use some or all of the tools used with Sun's ipe.
 
@@ -120,7 +123,7 @@ The following compile time preprocessor variables control the features:
     Message Footer				FEAT_FOOTER
     Balloon Evaluation				FEAT_BEVAL
 
-The first integration with a full IPE/IDE was with Sun Visual WorkShop. To
+The first integration with a full IPE/IDE was with Sun Visual WorkShop.  To
 compile a gvim which interfaces with VWS set the following flag, which sets
 all the above flags:
 
@@ -129,7 +132,9 @@ all the above flags:
 ==============================================================================
 3. Integrated Debuggers					*debugger-integration*
 
-Currently the only fully integrated debugger/IPE/IDE is Sun's Visual WorkShop
-Integrated Programming Environment.
+One fully integrated debugger/IPE/IDE is Sun's Visual WorkShop Integrated
+Programming Environment.
+
+For Sun NetBeans support see |netbeans|.
 
  vim:tw=78:sw=4:ts=8:ft=help:norl:

runtime/doc/develop.txt

@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 7.0aa.  Last change: 2004 Jan 17
+*develop.txt*   For Vim version 7.0aa.  Last change: 2006 Jan 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -123,7 +123,8 @@ VIM IS... MAINTAINABLE					*design-maintain*
 
 - The source code should not become a mess.  It should be reliable code.
 - Use the same layout in all files to make it easy to read |coding-style|.
-- Use comments in a useful way!
+- Use comments in a useful way!  Quoting the function name and argument names
+  is NOT useful.  Do explain what they are for.
 - Porting to another platform should be made easy, without having to change
   too much platform-independent code.
 - Use the object-oriented spirit: Put data and code together.  Minimize the
@@ -237,8 +238,8 @@ get_env_value()	Linux system function
 
 VARIOUS							*style-various*
 
-Typedef'ed names should end in "_t": >
-    typedef int some_t;
+Typedef'ed names should end in "_T": >
+    typedef int some_T;
 Define'ed names should be uppercase: >
     #define SOME_THING
 Features always start with "FEAT_": >
@@ -366,7 +367,111 @@ window		View on a buffer.  There can be several windows in Vim,
 		fit in the shell.
 
 
-To be continued...
+Spell checking						*develop-spell*
+
+When spell checking was going to be added to Vim a survey was done over the
+available spell checking libraries and programs.  Unfortunately, the result
+was that none of them provided sufficient capabilities to be used as the spell
+checking engine in Vim, for various reasons:
+
+- Missing support for multi-byte encodings.  At least UTF-8 must be supported,
+  so that more than one language can be used in the same file.
+  Doing on-the-fly conversion is not always possible (would require iconv
+  support).
+- For the programs and libraries: Using them as-is would require installing
+  them separately from Vim.  That's mostly not impossible, but a drawback.
+- Performance: A few tests showed that it's possible to check spelling on the
+  fly (while redrawing), just like syntax highlighting.  But the mechanisms
+  used by other code are much slower.  Myspell uses a hashtable, for example.
+  The affix compression that most spell checkers use makes it slower too.
+- For using an external program like aspell a communication mechanism would
+  have to be setup.  That's complicated to do in a portable way (Unix-only
+  would be relatively simple, but that's not good enough).  And performance
+  will become a problem (lots of process switching involved).
+- Missing support for words with non-word characters, such as "Etten-Leur" and
+  "et al.", would require marking the pieces of them OK, lowering the
+  reliability.
+- Missing support for regions or dialects.  Makes it difficult to accept
+  all English words and highlight non-Canadian words differently.
+- Missing support for rare words.  Many words are correct but hardly ever used
+  and could be a misspelled often-used word.
+- For making suggestions the speed is less important and requiring to install
+  another program or library would be acceptable.  But the word lists probably
+  differ, the suggestions may be wrong words.
+
+
+Spelling suggestions				*develop-spell-suggestions*
+
+For making suggestions there are two basic mechanisms:
+1. Try changing the bad word a little bit and check for a match with a good
+   word.  Or go through the list of good words, change them a little bit and
+   check for a match with the bad word.  The changes are deleting a character,
+   inserting a character, swapping two characters, etc.
+2. Perform soundfolding on both the bad word and the good words and then find
+   matches, possibly with a few changes like with the first mechanism.
+
+The first is good for finding typing mistakes.  After experimenting with
+hashtables and looking at solutions from other spell checkers the conclusion
+was that a trie (a kind of tree structure) is ideal for this.  Both for
+reducing memory use and being able to try sensible changes.  For example, when
+inserting a character only characters that lead to good words need to be
+tried.  Other mechanisms (with hashtables) need to try all possible letters at
+every position in the word.  Also, a hashtable has the requirement that word
+boundaries are identified separately, while a trie does not require this.
+That makes the mechanism a lot simpler.
+
+Soundfolding is useful when someone knows how the words sounds but doesn't
+know how it is spelled.  For example, the word "dictionary" might be written
+as "daktonerie".  The number of changes that the first method would need to
+try is very big, it's hard to find the good word that way.  After soundfolding
+the words become "tktnr" and "tkxnry", these differ by only two letters.
+
+To find words by their soundfolded equivalent (soundalike word) we need a list
+of all soundfolded words.  A few experiments have been done to find out what
+the best method is.  Alternatives:
+1. Do the sound folding on the fly when looking for suggestions.  This means
+   walking through the trie of good words, soundfolding each word and
+   checking how different it is from the bad word.  This is very efficient for
+   memory use, but takes a long time.  On a fast PC it takes a couple of
+   seconds for English, which can be acceptable for interactive use.  But for
+   some languages it takes more than ten seconds (e.g., German, Catalan),
+   which is unacceptable slow.  For batch processing (automatic corrections)
+   it's to slow for all languages.
+2. Use a trie for the soundfolded words, so that searching can be done just
+   like how it works without soundfolding.  This requires remembering a list
+   of good words for each soundfolded word.  This makes finding matches very
+   fast but requires quite a lot of memory, in the order of 1 to 10 Mbyte.
+   For some languages more than the original word list.
+3. Like the second alternative, but reduce the amount of memory by using affix
+   compression and store only the soundfolded basic word.  This is what Aspell
+   does.  Disadvantage is that affixes need to be stripped from the bad word
+   before soundfolding it, which means that mistakes at the start and/or end
+   of the word will cause the mechanism to fail.  Also, this becomes slow when
+   the bad word is quite different from the good word.
+
+The choice made is to use the second mechanism and use a separate file.  This
+way a user with sufficient memory can get very good suggestions while a user
+who is short of memory or just wants the spell checking and no suggestions
+doesn't use so much memory.
+
+
+Word frequency
+
+For sorting suggestions it helps to know which words are common.  In theory we
+could store a word frequency with the word in the dictionary.  However, this
+requires storing a count per word.  That degrades word tree compression a lot.
+And maintaining the word frequency for all languages will be a heavy task.
+Also, it would be nice to prefer words that are already in the text.  This way
+the words that appear in the specific text are preferred for suggestions.
+
+What has been implemented is to count words that have been seen during
+displaying.  A hashtable is used to quickly find the word count.  The count is
+initialized from words listed in COMMON items in the affix file, so that it
+also works when starting a new file.
+
+This isn't ideal, because the longer Vim is running the higher the counts
+become.  But in practice it is a noticable improvement over not using the word
+count.
 
 ==============================================================================
 4. Assumptions						*design-assumptions*
@@ -374,8 +479,8 @@ To be continued...
 Size of variables:
 char	    8 bit signed
 char_u	    8 bit unsigned
-int	    16, 32 or 64 bit signed
-unsigned    16, 32 or 64 bit unsigned
+int	    32 or 64 bit signed (16 might be possible with limited features)
+unsigned    32 or 64 bit unsigned (16 as with ints)
 long	    32 or 64 bit signed, can hold a pointer
 
 Note that some compilers cannot handle long lines or strings.  The C89

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 7.0aa.  Last change: 2004 Jul 20
+*diff.txt*      For Vim version 7.0aa.  Last change: 2006 Feb 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -41,6 +41,10 @@ the file.
 
 This only works when a standard "diff" command is available.  See 'diffexpr'.
 
+Diffs are local to the current tab page |tab-page|.  You can't see diffs with
+a window in another tab page.  This does make it possible to have several
+diffs at the same time, each in their own tab page.
+
 What happens is that Vim opens a window for each of the files.  This is like
 using the |-O| argument.  This uses vertical splits.  If you prefer horizontal
 splits add the |-o| argument: >
@@ -113,7 +117,7 @@ file for a moment and come back to the same file and be in diff mode again.
 							*:diffo* *:diffoff*
 :diffoff	Switch off diff mode for the current window.
 
-:diffoff!	Switch off diff mode for all windows.
+:diffoff!	Switch off diff mode for all windows in the current tab page.
 
 The ":diffoff" command resets the relevant options to their default value.
 This may be different from what the values were before diff mode was started,
@@ -157,10 +161,12 @@ original file and diff with that.  For example: >
 
 A buffer that is unloaded cannot be used for the diff.  But it does work for
 hidden buffers.  You can use ":hide" to close a window without unloading the
-buffer.
-
+buffer.  If you don't want a buffer to remain used for the diff do ":set
+nodiff" before hiding it.
 
 							*:diffu* *:diffupdate*
+:diffu[pdate]			Update the diff highlighting and folds.
+
 Vim attempts to keep the differences updated when you make changes to the
 text.  This mostly takes care of inserted and deleted lines.  Changes within a
 line and more complicated changes do not cause the differences to be updated.
@@ -216,7 +222,7 @@ It is an error if there is no change for the cursor to move to.
 
 ==============================================================================
 4. Diff copying			*copy-diffs* *E99* *E100* *E101* *E102* *E103*
-
+								*merge*
 There are two commands to copy text from one buffer to another.  The result is
 that the buffers will be equal within the specified range.
 
@@ -233,6 +239,8 @@ that the buffers will be equal within the specified range.
 		Modify another buffer to undo difference with the current
 		buffer.  Just like ":diffget" but the other buffer is modified
 		instead of the current one.
+		When [bufspec] is omitted and there is more than one other
+		buffer in diff mode where 'modifiable' is set this fails.
 		See below for [range].
 
 							*do*
@@ -341,8 +349,8 @@ get an error message.  Possible causes:
 -  The 'shell' and associated options are not set correctly.  Try if filtering
    works with a command like ":!sort".
 -  You are using 'diffexpr' and it doesn't work.
-If it's not clear what the problem is set the 'verbose' option to see more
-messages.
+If it's not clear what the problem is set the 'verbose' option to one or more
+to see more messages.
 
 The self-installing Vim includes a diff program.  If you don't have it you
 might want to download a diff.exe.  For example from

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 7.0aa.  Last change: 2004 Oct 07
+*digraph.txt*   For Vim version 7.0aa.  Last change: 2005 Sep 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -161,8 +161,14 @@ These are the RFC1345 digraphs for the one-byte characters.  See the output of
 ":digraphs" for the others.  The characters above 255 are only available when
 Vim was compiled with the |+multi_byte| feature.
 
+EURO
+
 Exception: RFC1345 doesn't specify the euro sign.  In Vim the digraph =e was
-added for this.
+added for this.  Note the difference between latin1, where the digraph Cu is
+used for the currency sign, and latin9 (iso-8859-15), where the digraph =e is
+used for the euro sign, while both of them are the character 164, 0xa4.  For
+compatibility with zsh Eu can also be used for the euro sign.
+
 							*digraph-table*
 char  digraph	hex	dec	official name ~
 ^@	NU	0x00	  0	NULL (NUL)

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 7.0aa.  Last change: 2005 Jan 26
+*editing.txt*   For Vim version 7.0aa.  Last change: 2006 Feb 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -46,7 +46,7 @@ However, the alternate file name is not changed when |:keepalt| is used.
 			name.  {not in Vi}
 
 All file names are remembered in the buffer list.  When you enter a file name,
-for editing (e.g., with ":e filename") or writing (e.g., with ":w file name"),
+for editing (e.g., with ":e filename") or writing (e.g., with ":w filename"),
 the file name is added to the list.  You can use the buffer list to remember
 which files you edited and to quickly switch from one file to another (e.g.,
 to copy text) with the |CTRL-^| command.  First type the number of the file
@@ -54,12 +54,12 @@ and then hit CTRL-^.  {Vi: only one alternate file name is remembered}
 
 
 CTRL-G		or				*CTRL-G* *:f* *:fi* *:file*
-:f[ile]			Prints the current file name (as typed), the
-			cursor position (unless the 'ruler' option is set),
-			and the file status (readonly, modified, read errors,
-			new file).  See the 'shortmess' option about how tho
-			make this message shorter.  {Vi does not include
-			column number}
+:f[ile]			Prints the current file name (as typed, unless ":cd"
+			was used), the cursor position (unless the 'ruler'
+			option is set), and the file status (readonly,
+			modified, read errors, new file).  See the 'shortmess'
+			option about how to make this message shorter.
+			{Vi does not include column number}
 
 :f[ile]!		like |:file|, but don't truncate the name even when
 			'shortmess' indicates this.
@@ -69,18 +69,21 @@ CTRL-G		or				*CTRL-G* *:f* *:fi* *:file*
 			buffer number is also given.  {not in Vi}
 
 					*g_CTRL-G* *word-count* *byte-count*
-g CTRL-G		Prints the current position of the cursor in four
-			ways: Column, Line, Word and Byte.  If there are
-			characters in the line that take more than one
-			position on the screen (<Tab> or special character),
-			both the "real" column and the screen column are
-			shown, separated with a dash.  See also 'ruler'
-			option.  {not in Vi}
+g CTRL-G		Prints the current position of the cursor in five
+			ways: Column, Line, Word, Character and Byte.  If the
+			number of Characters and Bytes is the same then the
+			Character position is omitted.
+			If there are characters in the line that take more
+			than one position on the screen (<Tab> or special
+			character), both the "real" column and the screen
+			column are shown, separated with a dash.
+			See also 'ruler' option.  {not in Vi}
 
 							*v_g_CTRL-G*
-{Visual}g CTRL-G	Similar to "g CTRL-G", but Word, Line, and Byte counts
-			for the visually selected region are displayed.  In
-			Blockwise mode, Column count is also shown.  (For
+{Visual}g CTRL-G	Similar to "g CTRL-G", but Word, Character, Line, and
+			Byte counts for the visually selected region are
+			displayed.
+			In Blockwise mode, Column count is also shown.  (For
 			{Visual} see |Visual-mode|.)
 			{not in VI}
 
@@ -152,11 +155,14 @@ Technical: On the Amiga you can use 30 characters for a file name.  But on an
 When you started editing without giving a file name, "No File" is displayed in
 messages.  If the ":write" command is used with a file name argument, the file
 name for the current file is set to that file name.  This only happens when
-the 'F' flag is included in 'cpoptions' (by default it is included).  This is
-useful when entering text in an empty buffer and then writing it to a file.
-If 'cpoptions' contains the 'f' flag (by default it is NOT included) the file
-name is set for the ":read file" command.  This is useful when starting Vim
-without an argument and then doing ":read file" to start editing a file.
+the 'F' flag is included in 'cpoptions' (by default it is included) |cpo-F|.
+This is useful when entering text in an empty buffer and then writing it to a
+file.  If 'cpoptions' contains the 'f' flag (by default it is NOT included)
+|cpo-f| the file name is set for the ":read file" command.  This is useful
+when starting Vim without an argument and then doing ":read file" to start
+editing a file.
+When the file name was set and 'filetype' is empty the filetype detection
+autocommands will be triggered.
 							*not-edited*
 Because the file name was set without really starting to edit that file, you
 are protected from overwriting that file.  This is done by setting the
@@ -328,6 +334,22 @@ CTRL-^			Edit the alternate file (equivalent to ":e #").
 			(For {Visual} see |Visual-mode|.)
 			{not in VI}
 
+							*gF*
+[count]gF		Same as "gf", except if a number follows the file
+			name, then the cursor is positioned on that line in
+			the file. The file name and the number must be
+			separated by a non-filename (see 'isfname') and
+			non-numeric character. White space between the
+			filename, the separator and the number are ignored.
+			Examples: >
+				eval.c:10
+				eval.c @ 20
+				eval.c (30)
+				eval.c 40
+<
+							*v_gF*
+{Visual}[count]gF	Same as "v_gf".
+
 These commands are used to start editing a single file.  This means that the
 file is read into the buffer and the current file name is set.  The file that
 is opened depends on the current directory, see |:cd|.
@@ -351,14 +373,32 @@ file1 file2") embedded spaces must be escaped with a backslash.
 							*wildcard*
 Wildcards in {file} are expanded.  Which wildcards are supported depends on
 the system.  These are the common ones:
-	*	matches anything, including nothing
 	?	matches one character
+	*	matches anything, including nothing
+	**	matches anything, including nothing, recurses into directories
 	[abc]	match 'a', 'b' or 'c'
+
 To avoid the special meaning of the wildcards prepend a backslash.  However,
 on MS-Windows the backslash is a path separator and "path\[abc]" is still seen
 as a wildcard when "[" is in the 'isfname' option.  A simple way to avoid this
 is to use "path\[[]abc]".  Then the file "path[abc]" literally.
 
+					*starstar-wildcard*
+Expanding "**" is possible on Unix, Win32, Mac OS/X and a few other systems.
+This allows searching a directory tree.  This goes up to 100 directories deep.
+Example: >
+	:n **/*.txt
+Finds files:
+	ttt.txt
+	subdir/ttt.txt
+	a/b/c/d/ttt.txt
+When non-wildcard characters are used these are only matched in the first
+directory.  Example: >
+	:n /usr/inc**/*.h
+Finds files:
+	/usr/include/types.h
+	/usr/include/sys/types.h
+	/usr/inc_old/types.h
 					*backtick-expansion* *`-expansion*
 On Unix and a few other systems you can also use backticks in the file name,
 for example: >
@@ -377,8 +417,9 @@ The expression can contain just about anything, thus this can also be used to
 avoid the special meaning of '"', '|', '%' and '#'.
 
 							*++opt* *[++opt]*
-The [++opt] argument can be used to force the value of 'fileformat' or
-'fileencoding' to a value for one command.  The form is: >
+The [++opt] argument can be used to force the value of 'fileformat',
+'fileencoding' or 'binary' to a value for one command, and to specify the
+behavior for bad characters.  The form is: >
 	++{optname}={value}
 
 Where {optname} is one of:		*++ff* *++enc* *++bin* *++nobin*
@@ -386,6 +427,7 @@ Where {optname} is one of:		*++ff* *++enc* *++bin* *++nobin*
     enc    or  encoding	    overrides 'fileencoding'
     bin    or  binary	    sets 'binary'
     nobin  or  nobinary	    resets 'binary'
+    bad                     specifies behavior for bad characters
 
 {value} cannot contain white space.  It can be any valid value for these
 options.  Examples: >
@@ -395,12 +437,24 @@ This edits the same file again with 'fileformat' set to "unix". >
 	:w ++enc=latin1 newfile
 This writes the current buffer to "newfile" in latin1 format.
 
+There may be several ++opt arguments, separated by white space.  They must all
+appear before any |+cmd| argument.
+
+								*++bad*
+The argument of "++bad=" specifies what happens with characters that can't be
+converted and illegal bytes.  It can be one of three things:
+    ++bad=X      A single-byte character that replaces each bad character.
+    ++bad=keep   Keep bad characters without conversion.  Note that this may
+    		 result in illegal bytes in your text!
+    ++bad=drop   Remove the bad characters.
+
+The default is like "++bad=?": Replace each bad character with a question
+mark.
+
 Note that when reading, the 'fileformat' and 'fileencoding' options will be
 set to the used format.  When writing this doesn't happen, thus a next write
 will use the old value of the option.  Same for the 'binary' option.
 
-There may be several ++opt arguments, separated by white space.  They must all
-appear before any |+cmd| argument.
 
 							*+cmd* *[+cmd]*
 The [+cmd] argument can be used to position the cursor in the newly opened
@@ -560,7 +614,9 @@ list of the current window.
 			current entry.
 			This command keeps the currently edited file, also
 			when it's deleted from the argument list.
-			{not in Vi} {not available when compiled without the
+			Example: >
+				:argdel *.obj
+<			{not in Vi} {not available when compiled without the
 			|+listcmds| feature}
 
 :{range}argd[elete]	Delete the {range} files from the argument list.
@@ -763,7 +819,7 @@ USING THE ARGUMENT LIST
 			each file.
 			{not in Vi} {not available when compiled without the
 			|+listcmds| feature}
-			Also see |:windo| and |:bufdo|.
+			Also see |:windo|, |:tabdo| and |:bufdo|.
 
 Example: >
 	:args *.c
@@ -837,6 +893,8 @@ used, for example, when the write fails and you want to try again later with
 			the filename of the current buffer to {file}.  The
 			previous name is used for the alternate file name.
 			The [!] is needed to overwrite an existing file.
+			When 'filetype' is empty filetype detection is done
+			with the new name, before the file is written.
 			{not in Vi}
 
 							*:up* *:update*
@@ -907,8 +965,8 @@ if the system allows it (the directory must be writable).
 							*write-fail*
 If the writing of the new file fails, you have to be careful not to lose
 your changes AND the original file.  If there is no backup file and writing
-the new file failed, you have already lost the original file! DON'T EXIT VIM
-UNTIL YOU WRITE OUT THE FILE! If a backup was made, it is put back in place
+the new file failed, you have already lost the original file!  DON'T EXIT VIM
+UNTIL YOU WRITE OUT THE FILE!  If a backup was made, it is put back in place
 of the original file (if possible).  If you exit Vim, and lose the changes
 you made, the original file will mostly still be there.  If putting back the
 original file fails, there will be an error message telling you that you
@@ -972,6 +1030,9 @@ The names can be in upper- or lowercase.
 			Vim refuses to |abandon| the current buffer, and when
 			the last file in the argument list has not been
 			edited.
+			If there are other tab pages and quitting the last
+			window in the current tab page the current tab page is
+			closed |tab-page|.
 
 :conf[irm] q[uit]	Quit, but give prompt when changes have been made, or
 			the last file in the argument list has not been
@@ -1140,13 +1201,16 @@ You may use the |:cd| and |:lcd| commands to change to another directory, so
 you will not have to type that directory name in front of the file names.  It
 also makes a difference for executing external commands, e.g. ":!ls".
 
+Changing directory fails when the current buffer is modified, the '.' flag is
+present in 'cpoptions' and "!" is not used in the command.
+
 							*:cd* *E472*
-:cd			On non-Unix systems: Print the current directory
+:cd[!]			On non-Unix systems: Print the current directory
 			name.  On Unix systems: Change the current directory
 			to the home directory.  Use |:pwd| to print the
 			current directory on all systems.
 
-:cd {path}		Change the current directory to {path}.
+:cd[!] {path}		Change the current directory to {path}.
 			If {path} is relative, it is searched for in the
 			directories listed in |'cdpath'|.
 			Does not change the meaning of an already opened file,
@@ -1157,19 +1221,19 @@ also makes a difference for executing external commands, e.g. ":!ls".
 				:cd %:h
 <
 							*:cd-* *E186*
-:cd -			Change to the previous current directory (before the
+:cd[!] -		Change to the previous current directory (before the
 			previous ":cd {path}" command). {not in Vi}
 
 							*:chd* *:chdir*
-:chd[ir] [path]		Same as |:cd|.
+:chd[ir][!] [path]	Same as |:cd|.
 
 							*:lc* *:lcd*
-:lc[d] {path}		Like |:cd|, but only set the current directory for the
+:lc[d][!] {path}	Like |:cd|, but only set the current directory for the
 			current window.  The current directory for other
 			windows is not changed. {not in Vi}
 
 							*:lch* *:lchdir*
-:lch[dir]		Same as |:lcd|. {not in Vi}
+:lch[dir][!]		Same as |:lcd|. {not in Vi}
 
 							*:pw* *:pwd* *E187*
 :pw[d]			Print the current directory name.  {Vi: no pwd}
@@ -1385,6 +1449,11 @@ It is also possible that you modified the file yourself, from another edit
 session or with another command (e.g., a filter command).  Then you will know
 which version of the file you want to keep.
 
+There is one situation where you get the message while there is nothing wrong:
+On a Win32 system on the day daylight saving time starts.  There is something
+in the Win32 libraries that confuses Vim about the hour time difference.  The
+problem goes away the next day.
+
 ==============================================================================
 11. File Searching					*file-searching*
 
@@ -1393,9 +1462,9 @@ which version of the file you want to keep.
 The file searching is currently used for the 'path', 'cdpath' and 'tags'
 options.  There are three different types of searching:
 
-1) Downward search:
+1) Downward search:					*starstar*
    Downward search uses the wildcards '*', '**' and possibly others
-   supported by your operating system. '*' and '**' are handled inside Vim, so
+   supported by your operating system.  '*' and '**' are handled inside Vim, so
    they work on all operating systems.
 
    The usage of '*' is quite simple: It matches 0 or more characters.
@@ -1429,10 +1498,10 @@ options.  There are three different types of searching:
 
 2) Upward search:
    Here you can give a directory and then search the directory tree upward for
-   a file. You could give stop-directories to limit the upward search. The
+   a file.  You could give stop-directories to limit the upward search.  The
    stop-directories are appended to the path (for the 'path' option) or to
-   the filename (for the 'tags' option) with a ';'. If you want several
-   stop-directories separate them with ';'. If you want no stop-directory
+   the filename (for the 'tags' option) with a ';'.  If you want several
+   stop-directories separate them with ';'.  If you want no stop-directory
    ("search upward till the root directory) just use ';'. >
 	/usr/include/sys;/usr
 <   will search in: >
@@ -1451,7 +1520,7 @@ options.  There are three different types of searching:
 	/u/user_x/work/include
 	/u/user_x/include
 
-3) Combined up/downward search
+3) Combined up/downward search:
    If Vim's current path is /u/user_x/work/release and you do >
 	set path=**;/u/user_x
 <  and then search for a file with |gf| the file is searched in: >
@@ -1459,10 +1528,10 @@ options.  There are three different types of searching:
 	/u/user_x/work/**
 	/u/user_x/**
 <
-   BE CAREFUL! This might consume a lot of time, as the search of
+   BE CAREFUL!  This might consume a lot of time, as the search of
    '/u/user_x/**' includes '/u/user_x/work/**' and
    '/u/user_x/work/release/**'.  So '/u/user_x/work/release/**' is searched
-   three and '/u/user_x/work/**' is searched two times.
+   three times and '/u/user_x/work/**' is searched twice.
 
    In the above example you might want to set path to: >
 	:set path=**,/u/user_x/**

runtime/doc/evim-fr.1

@@ -0,0 +1,56 @@
+.TH EVIM 1 "16 f<>vrier 2002 February 16"
+.SH NAME
+evim \- <20> Easy Vim <20>, <20>dite un fichier avec Vim sans utiliser les modes
+.SH SYNOPSIS
+.br
+.B evim
+[options] [fichier ...]
+.br
+.B eview
+.SH DESCRIPTION
+.B eVim
+lance
+.B Vim
+et configure ses options afin qu'il se comporte comme un <20>diteur sans mode.
+Cela reste Vim, mais vous pouvez l'utiliser comme un <20>diteur <20> cliquer-taper <20>.
+Cela ressemble beaucoup <20> l'<27>dition avec Notepad sur MS-Windows.
+.B eVim
+ne fonctionne qu'avec l'interface graphique, qui est n<>cessaire pour permettre
+l'utilisation des menus et de la barre d'outils.
+.PP
+Il n'est utile qu'aux personnes qui ne parviennent vraiment pas <20> utiliser Vim
+de fa<66>on traditionnelle. L'<27>dition est alors bien moins efficace.
+.PP
+.B eview
+fait la m<>me chose, mais d<>marre Vim en mode Lecture-seule.
+Cela revient <20> lancer evim \-R.
+.PP
+Voir vim(1) pour davantage d'informations sur Vim, les options, etc.
+.PP
+L'option 'insertmode' est activ<69>e pour permettre de taper directement du texte.
+.br
+Les mappages sont configur<75>s pour que Copier et Coller fonctionnent avec les
+raccourcis habituels de MS-Windows. CTRL-X coupe le texte, CTRL-C copie le
+texte et CTRL-V colle le texte.
+Vous pouvez utiliser CTRL-Q pour obtenir la fonction originale de CTRL-V.
+.SH OPTIONS
+Voir vim(1).
+.SH FICHIERS
+.TP 15
+/usr/local/lib/vim/evim.vim
+Le script charg<72> pour initialiser eVim.
+.SH AUSSI CONNU SOUS
+<EFBFBD>galement connu sous le nom <20> Vim pour gumbies <20> [N.D.T. : Flying Circus...].
+Quand vous utilisez eVim, vous <20>tes cens<6E> prendre un mouchoir de poche,
+faire un noeud <20> chaque coin et le porter sur votre t<>te.
+.SH VOIR AUSSI
+vim(1)
+.SH AUTEUR
+La majeure partie de
+.B Vim
+a <20>t<EFBFBD> <20>crite par Bram Moolenaar, avec l'aide de nombreux autres contributeurs.
+Voir le menu Aide/Remerciements ou ":help credits" dans
+.B Vim.
+.SH TRADUCTION
+Cette page de manuel a <20>t<EFBFBD> traduite David Blanchet.
+<david.blanchet@free.fr> 2005-03-26.

runtime/doc/evim-fr.UTF-8.1

@@ -0,0 +1,56 @@
+.TH EVIM 1 "16 février 2002 February 16"
+.SH NAME
+evim \- « Easy Vim », édite un fichier avec Vim sans utiliser les modes
+.SH SYNOPSIS
+.br
+.B evim
+[options] [fichier ...]
+.br
+.B eview
+.SH DESCRIPTION
+.B eVim
+lance
+.B Vim
+et configure ses options afin qu'il se comporte comme un éditeur sans mode.
+Cela reste Vim, mais vous pouvez l'utiliser comme un éditeur « cliquer-taper ».
+Cela ressemble beaucoup à l'édition avec Notepad sur MS-Windows.
+.B eVim
+ne fonctionne qu'avec l'interface graphique, qui est nécessaire pour permettre
+l'utilisation des menus et de la barre d'outils.
+.PP
+Il n'est utile qu'aux personnes qui ne parviennent vraiment pas à utiliser Vim
+de façon traditionnelle. L'édition est alors bien moins efficace.
+.PP
+.B eview
+fait la même chose, mais démarre Vim en mode Lecture-seule.
+Cela revient à lancer evim \-R.
+.PP
+Voir vim(1) pour davantage d'informations sur Vim, les options, etc.
+.PP
+L'option 'insertmode' est activée pour permettre de taper directement du texte.
+.br
+Les mappages sont configurés pour que Copier et Coller fonctionnent avec les
+raccourcis habituels de MS-Windows. CTRL-X coupe le texte, CTRL-C copie le
+texte et CTRL-V colle le texte.
+Vous pouvez utiliser CTRL-Q pour obtenir la fonction originale de CTRL-V.
+.SH OPTIONS
+Voir vim(1).
+.SH FICHIERS
+.TP 15
+/usr/local/lib/vim/evim.vim
+Le script chargé pour initialiser eVim.
+.SH AUSSI CONNU SOUS
+Également connu sous le nom « Vim pour gumbies » [N.D.T. : Flying Circus...].
+Quand vous utilisez eVim, vous êtes censé prendre un mouchoir de poche,
+faire un noeud à chaque coin et le porter sur votre tête.
+.SH VOIR AUSSI
+vim(1)
+.SH AUTEUR
+La majeure partie de
+.B Vim
+a été écrite par Bram Moolenaar, avec l'aide de nombreux autres contributeurs.
+Voir le menu Aide/Remerciements ou ":help credits" dans
+.B Vim.
+.SH TRADUCTION
+Cette page de manuel a été traduite David Blanchet.
+<david.blanchet@free.fr> 2005-03-26.

runtime/doc/evim-it.1

@@ -25,7 +25,7 @@ maniera usuale.
 La modifica file sar<61> molto meno efficiente.
 .PP
 .B eview
-come sopra, ma parte in modalit<69> "Sola Lettura".  Funziona come evim -R.
+come sopra, ma parte in modalit<69> "Sola Lettura".  Funziona come evim \-R.
 .PP
 Vedere vim(1) per dettagli riguardo a Vim, opzioni, etc.
 .PP

runtime/doc/evim-it.UTF-8.1

@@ -0,0 +1,54 @@
+.TH EVIM 1 "16 febbraio 2002 "
+.SH NOME
+evim \- Vim "facile", Vim impostato in modo da poter essere usato
+facilmente per modificare file, anche da chi non abbia familiarità
+con i comandi.
+.SH SINTASSI
+.br
+.B evim
+[opzioni] [file ..]
+.br
+.B eview
+.SH DESCRIZIONE
+.B evim
+Inizia
+.B Vim
+e imposta le opzioni per farlo comportare come un editore "modeless".
+State sempre usando Vim, ma come un editore "posizionati-e-clicca".
+Simile all'uso di Notepad in MS-Windows.
+.B evim
+richiede la presenza della GUI, per avere a disposizione menu e barra
+strumenti.
+.PP
+Da usarsi solo da parte di chi non è in grado di lavorare con Vim nella
+maniera usuale.
+La modifica file sarà molto meno efficiente.
+.PP
+.B eview
+come sopra, ma parte in modalità "Sola Lettura".  Funziona come evim \-R.
+.PP
+Vedere vim(1) per dettagli riguardo a Vim, opzioni, etc.
+.PP
+L'opzione 'insertmode' è impostata per poter immettere del testo direttamente.
+.br
+Sono definite delle mappature che consentono di usare COPIA e INCOLLA con i
+familiari tasti usati sotto MS-Windows.
+CTRL-X taglia testo, CTRL-C copia testo e CTRL-V incolla testo.
+Usate CTRL-Q per ottenere quello chs si ottierrebbe con CTRL-V in Vim nativo.
+.SH OPZIONI
+Vedere vim(1).
+.SH FILE
+.TP 15
+/usr/local/lib/vim/evim.vim
+Lo script caricato per inizializzare eVim.
+.SH NAC [NOTO ANCHE COME]
+Noto Anche Come "Vim per semplici".
+Quando usate evim si suppone che prendiate un fazzoletto,
+facciate un nodo ad ogni angolo e ve lo mettiate in testa.
+.SH VEDERE ANCHE
+vim(1)
+.SH AUTORE
+Buona parte di
+.B Vim
+è stato scritto da Bram Moolenaar, con molto aiuto da altri.
+Vedere il Menu "Aiuto/Crediti".

runtime/doc/evim-ru.1

@@ -0,0 +1,59 @@
+.TH EVIM 1 "2002 February 16"
+.SH <EFBFBD><EFBFBD><EFBFBD>
+evim \- <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Vim, <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD> <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Vim <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+.SH <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+.br
+.B evim
+[<5B><><EFBFBD><EFBFBD><EFBFBD>] [<5B><><EFBFBD><EFBFBD> ..]
+.br
+.B eview
+.SH <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+.B evim
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+.B Vim
+<EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><><EFBFBD> <20><> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD>
+<EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>. <20> <20><><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Vim <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+Notepad <20><> MS-Windows.
+.B eVim
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD> <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.
+.PP
+<EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD> <20><><EFBFBD>, <20><><EFBFBD> <20><> <20><><EFBFBD><EFBFBD><EFBFBD>-<2D><> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><> <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> Vim <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>. <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD> <20><><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><><EFBFBD> <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Vim.
+.PP
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+.B eview
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> <20><> <20><> <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><> <20><><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> "<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+<EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>". <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 
+evim \-R.
+.PP
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> Vim, <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> <20>.<2E>. <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 
+vim(1).
+.PP
+<EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+.B evim
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> 'insertmode', <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.
+.br
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD>, <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> MS-Windows
+<EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>. CTRL-X <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, CTRL-C <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> CTRL-V <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>. <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> CTRL-V, <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> CTRL-Q.
+.SH <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+<EFBFBD><EFBFBD>. vim(1).
+.SH <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+.TP 15
+/usr/local/lib/vim/evim.vim
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> eVim.
+.SH AKA
+eVim <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD> "Vim <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>".
+<EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><> <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+<EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> <20><> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.
+.SH <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+vim(1)
+.SH <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD>
+.B Vim
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> (Bram Moolenaar), <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD>. <20><>. <20><><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.

runtime/doc/evim-ru.UTF-8.1

@@ -0,0 +1,59 @@
+.TH EVIM 1 "2002 February 16"
+.SH ИМЯ
+evim \- простой Vim, позволяет редактировать файл с помощью Vim в безрежимном режиме
+.SH КОМАНДНАЯ СТРОКА
+.br
+.B evim
+[ключи] [файл ..]
+.br
+.B eview
+.SH ОПИСАНИЕ
+Команда
+.B evim
+запускает
+.B Vim
+и настраивает ряд опций таким образом, что он начинает вести себя
+как обычный безрежимный редактор. В этом режиме Vim напоминает
+Notepad из MS-Windows.
+.B eVim
+всегда запускается с поддержкой графического интерфейса, чтобы обеспечить
+использование меню и инструментальной панели.
+.PP
+Эта команда создана для тех, кто по каким-то причинам не в состоянии 
+работать с Vim в обычном режиме. Редактирование файлов при этом происходит
+гораздо менее эффективно, чем при использовании обычного Vim.
+.PP
+Команда
+.B eview
+выполняет почти ту же самую задачу, но файл открывается в режиме "только
+для чтения". Использование этой команды полностью идентично использованию 
+evim \-R.
+.PP
+Подробнее о Vim, ключах запуска и т.п. смотрите на странице справочника 
+vim(1).
+.PP
+При использовании
+.B evim
+включается опция 'insertmode', что позволяет вводить текст напрямую.
+.br
+Кроме того, настраиваются привязки, позволяющие использовать кнопки MS-Windows
+для выполнения команд копирования и вклейки. CTRL-X используется для вырезания 
+текста, CTRL-C для копирования и CTRL-V для вклейки. Чтобы воспользоваться
+изначальным значением кнопки CTRL-V, используйте CTRL-Q.
+.SH ПАРАМЕТРЫ ЗАПУСКА
+См. vim(1).
+.SH ФАЙЛЫ
+.TP 15
+/usr/local/lib/vim/evim.vim
+Сценарий, который загружается для инициализации eVim.
+.SH AKA
+eVim также известен как "Vim для чайников".
+Для наилучшего эффекта рекомендуется во время использования повязать
+на голове платок, предварительно завязав на каждом конце по узелку.
+.SH СМОТРИ ТАКЖЕ
+vim(1)
+.SH АВТОРЫ
+Большая часть
+.B Vim
+создана Брамом Мооленааром (Bram Moolenaar), которому помогает огромное 
+количество людей. См. меню Справка/Благодарности.

runtime/doc/evim.1

@@ -21,7 +21,7 @@ Only to be used for people who really can't work with Vim in the normal way.
 Editing will be much less efficient.
 .PP
 .B eview
-is the same, but starts in read-only mode.  It works just like evim -R.
+is the same, but starts in read-only mode.  It works just like evim \-R.
 .PP
 See vim(1) for details about Vim, options, etc.
 .PP

runtime/doc/farsi.txt

@@ -1,4 +1,4 @@
-*farsi.txt*     For Vim version 7.0aa.  Last change: 2004 Jun 16
+*farsi.txt*     For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Mortaza Ghassab Shiran
@@ -42,7 +42,7 @@ o  Changing keyboard mapping and reverse insert modes using a single
 o  Backing from reverse insert mode to the correct place in the file
    (if possible).
 
-o  While in Farsi mode, numbers are entered from left to right. Upon entering
+o  While in Farsi mode, numbers are entered from left to right.  Upon entering
    a none number character, that character will be inserted just into the
    left of the last number.
 
@@ -54,8 +54,8 @@ o  Farsi keymapping on the command line in reverse insert mode.
 
 o  Toggling between left-to-right and right-to-left via F8 function key.
 
-o  Toggling between Farsi ISIR-3342 standard encoding and VIM Farsi via F9
-   function key. Since this makes sense only for the text written in
+o  Toggling between Farsi ISIR-3342 standard encoding and Vim Farsi via F9
+   function key.  Since this makes sense only for the text written in
    right-to-left mode, this function is also supported only in right-to-left
    mode.
 
@@ -77,8 +77,8 @@ Font Installation
 
 o  Installation of fonts for MS Window systems (NT/95/98)
 
-   From 'Control Panel' folder, start the 'Fonts' program. Then from 'file'
-   menu item select 'Install New Fonts ...'. Browse and select the
+   From 'Control Panel' folder, start the 'Fonts' program.  Then from 'file'
+   menu item select 'Install New Fonts ...'.  Browse and select the
    'far-a01.fon', then follow the installation guide.
    NOTE: several people have reported that this does not work.  The solution
    is unknown.
@@ -104,19 +104,19 @@ o  Installation of fonts for X Window systems (SunOS)
 o  Installation of ASCII screen fonts (Unix/Linux)
 
    For Linux system, copy the far-a01.f16 fonts into /usr/lib/kbd/consolefonts
-   directory and execute the setfont program as "setfont far-a01.f16". For
+   directory and execute the setfont program as "setfont far-a01.f16".  For
    other systems (e.g. SCO Unix), please refer to the fonts installation
    section of your system administration manuals.
 
 o  Installation of ASCII screen fonts (DOS)
 
-   After system power on, prior to the first use of VIM, upload the Farsi
+   After system power on, prior to the first use of Vim, upload the Farsi
    fonts by executing the far-a01.com font uploading program.
 
 
 Usage
 -----
-Prior to starting VIM, the environment in which VIM can run in Farsi mode,
+Prior to starting Vim, the environment in which Vim can run in Farsi mode,
 must be set.  In addition to installation of Farsi fonts, following points
 refer to some of the system environments, which you may need to set:
 Key code mapping, loading graphic card in ASCII screen mode, setting the IO
@@ -124,26 +124,26 @@ driver in 8 bit clean mode ... .
 
 o  Setting the Farsi fonts
 
-   +  For VIM GUI set the 'guifont' to far-a01. This is done by entering
-      ':set guifont=far-a01' in the VIM window.
+   +  For Vim GUI set the 'guifont' to far-a01.  This is done by entering
+      ':set guifont=far-a01' in the Vim window.
 
-      You can have 'guifont' set to far-a01 by VIM during the VIM startup
+      You can have 'guifont' set to far-a01 by Vim during the Vim startup
       by appending the ':set guifont=far-a01' into your .vimrc file
       (in case of NT/95/98 platforms _vimrc).
 
-      Under the X Window environment, you can also start the VIM with
+      Under the X Window environment, you can also start Vim with the
       '-fn far-a01' option.
 
-   +  For the VIM within a xterm, start a xterm with the Farsi fonts (e.g.
-      kterm -fn far-a01). Then start the VIM inside the kterm.
+   +  For Vim within a xterm, start a xterm with the Farsi fonts (e.g.
+      kterm -fn far-a01).  Then start Vim inside the kterm.
 
-   +  For VIM under DOS, prior to the first usage of VIM, upload the Farsi
+   +  For Vim under DOS, prior to the first usage of Vim, upload the Farsi
       fonts by executing the far-a01.com fonts uploading program.
 
 o  Farsi Keymapping Activation
 
    To activate the Farsi keymapping, set either 'altkeymap' or 'fkmap'.
-   This is done by entering ':set akm' or ':set fk' in the VIM window.
+   This is done by entering ':set akm' or ':set fk' in the Vim window.
    You can have 'altkeymap' or 'fkmap' set as default by appending ':set akm'
    or ':set fk' in your .vimrc file or _vimrc in case of NT/95/98 platforms.
 
@@ -152,24 +152,24 @@ o  Farsi Keymapping Activation
 
 o  right-to-left Farsi Mode
 
-   By default VIM starts in Left-to-right mode. Following are ways to change
+   By default Vim starts in Left-to-right mode.  Following are ways to change
    the window orientation:
 
-   + Start the VIM with -F option (e.g. vim -F ... ).
+   + Start Vim with the -F option (e.g. vim -F ...).
 
-   + Use F8 function key to toggle between left-to-right and right-to-left.
+   + Use the F8 function key to toggle between left-to-right and right-to-left.
 
    + While in Left-to-right mode, enter 'set rl' in the command line ('rl' is
      the abbreviation for rightleft).
 
-   + Put the 'set rl' line in your '.vimrc' file to start the  VIM in
+   + Put the 'set rl' line in your '.vimrc' file to start Vim in
      right-to-left mode permanently.
 
 Encoding
 --------
 
-The letter encoding used is the VIM extended ISIR-3342 standard with a built
-in function to convert between VIM extended ISIR-3342 and ISIR-3342 standard.
+The letter encoding used is the Vim extended ISIR-3342 standard with a built
+in function to convert between Vim extended ISIR-3342 and ISIR-3342 standard.
 
 For document portability reasons, the letter encoding is kept the same across
 different platforms (i.e. UNIX's, NT/95/98, MS DOS, ...).
@@ -183,11 +183,11 @@ o  Keyboard
    +  CTRL-_ moves the cursor to the end of the typed text in edit mode.
 
    +  CTRL-_ in command mode only toggles keyboard mapping between Farsi(akm)/
-      Latin. The Farsi text is then entered in reverse insert mode.
+      Latin.  The Farsi text is then entered in reverse insert mode.
 
    +  F8 - Toggles between left-to-right and right-to-left.
 
-   +  F9 - Toggles the encoding between ISIR-3342 standard and VIM extended
+   +  F9 - Toggles the encoding between ISIR-3342 standard and Vim extended
       ISIR-3342 (supported only in right-to-left mode).
 
    +  Keyboard mapping is based on the Iranian ISIRI-2901 standard.
@@ -231,28 +231,28 @@ o  In insert/replace mode and fkmap (Farsi mode) set, CTRL-B is not
    supported.
 
 o  If you change the character mapping between Latin/Farsi, the redo buffer
-   will be reset (emptied). That is, redo is valid and will function (using
+   will be reset (emptied).  That is, redo is valid and will function (using
    '.') only within the mode you are in.
 
 o  While numbers are entered in Farsi mode, the redo buffer will be reset
-   (emptied). That is, you can not redo the last changes (using '.') after
+   (emptied).  That is, you cannot redo the last changes (using '.') after
    entering numbers.
 
-o  While in left-to-right and Farsi mode set, CTRL-R is not supported.
+o  While in left-to-right mode and Farsi mode set, CTRL-R is not supported.
 
 o  While in right-to-left mode, the search on 'Latin' pattern does not work,
    except if you enter the Latin search pattern in reverse.
 
-o  In the command mode, there is no support for entering the numbers from left
-   to right and also for the sake of the flexibility the keymapping logic is
+o  In command mode there is no support for entering numbers from left
+   to right and also for the sake of flexibility the keymapping logic is
    restricted.
 
-o  Under X Window environment, if you want to run the VIM within a xterm
+o  Under the X Window environment, if you want to run Vim within a xterm
    terminal emulator and Farsi mode set, you need to have an ANSI compatible
-   xterm terminal emulator. This is because the letter codes above 128 decimal
+   xterm terminal emulator.  This is because the letter codes above 128 decimal
    have certain meanings in the standard xterm terminal emulator.
 
-   Note: Under X Window environment, VIM GUI works fine in Farsi mode.
+   Note: Under X Window environment, Vim GUI works fine in Farsi mode.
 	 This eliminates the need of any xterm terminal emulator.
 
 
@@ -261,7 +261,7 @@ Bugs
 While in insert/replace and Farsi mode set, if you repeatedly change the
 cursor position (via cursor movement) and enter new text and then try to undo
 the last change, the undo will lag one change behind.  But as you continue to
-undo, you will reach the original line of text. You can also use U to undo all
+undo, you will reach the original line of text.  You can also use U to undo all
 changes made in the current line.
 
 For more information about the bugs refer to rileft.txt.

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 7.0aa.  Last change: 2004 Aug 31
+*filetype.txt*  For Vim version 7.0aa.  Last change: 2005 Sep 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -44,15 +44,21 @@ Detail: The ":filetype on" command will load one of these files:
 	name, the file $VIMRUNTIME/scripts.vim is used to detect it from the
 	contents of the file.
 
-To add your own file types, see |new-filetype| below.
+To add your own file types, see |new-filetype| below.  To search for help on a
+filetype prepend "ft-" and optionally append "-syntax", "-indent" or
+"-plugin".  For example: >
+	:help ft-vim-indent
+	:help ft-vim-syntax
+	:help ft-man-plugin
 
 If the file type is not detected automatically, or it finds the wrong type,
 you can either set the 'filetype' option manually, or add a modeline to your
 file.  Example, for in an IDL file use the command: >
 	:set filetype=idl
-or add this |modeline| to the file: >
-	/* vim: set filetype=idl : */
-<
+
+or add this |modeline| to the file:
+	/* vim: set filetype=idl : */ ~
+
 						*:filetype-plugin-on*
 You can enable loading the plugin files for specific file types with: >
 	:filetype plugin on
@@ -132,16 +138,16 @@ kind of file it is.  This doesn't always work.  A number of global variables
 can be used to overrule the filetype used for certain extensions:
 
 	file name	variable ~
-	*.asa		g:filetype_asa	|aspvbs-syntax| |aspperl-syntax|
-	*.asp		g:filetype_asp	|aspvbs-syntax| |aspperl-syntax|
-	*.asm		g:asmsyntax	|asm-syntax|
+	*.asa		g:filetype_asa	|ft-aspvbs-syntax| |ft-aspperl-syntax|
+	*.asp		g:filetype_asp	|ft-aspvbs-syntax| |ft-aspperl-syntax|
+	*.asm		g:asmsyntax	|ft-asm-syntax|
 	*.prg		g:filetype_prg
 	*.pl		g:filetype_pl
 	*.inc		g:filetype_inc
-	*.w		g:filetype_w	|cweb-syntax|
-	*.i		g:filetype_i	|progress-syntax|
-	*.p		g:filetype_p	|pascal-syntax|
-	*.sh		g:bash_is_sh	|sh-syntax|
+	*.w		g:filetype_w	|ft-cweb-syntax|
+	*.i		g:filetype_i	|ft-progress-syntax|
+	*.p		g:filetype_p	|ft-pascal-syntax|
+	*.sh		g:bash_is_sh	|ft-sh-syntax|
 
 							*filetype-ignore*
 To avoid that certain files are being inspected, the g:ft_ignore_pat variable
@@ -178,7 +184,8 @@ A. If you want to overrule all default file type checks.
 <  3. To use the new filetype detection you must restart Vim.
 
    The files in the "ftdetect" directory are used after all the default
-   checks, thus they can overrule a previously detected file type.
+   checks, thus they can overrule a previously detected file type.  But you
+   can also use |:setfiletype| to keep a previously detected filetype.
 
 B. If you want to detect your file after the default file type checks.
 
@@ -380,9 +387,9 @@ ways to change this:
 3.  Docs for the default filetype plugins.		*ftplugin-docs*
 
 
-CHANGELOG						*changelog-plugin*
+CHANGELOG						*ft-changelog-plugin*
 
-Allows for easy entrance of Changelog entries in Changelog files. There are
+Allows for easy entrance of Changelog entries in Changelog files.  There are
 some commands, mappings, and variables worth exploring:
 
 Options:
@@ -401,7 +408,7 @@ Local mappings:
 Global mappings:
 			NOTE: The global mappings are accessed by sourcing the
 			ftplugin/changelog.vim file first, e.g. with >
-				runtime ftplugin/man.vim
+				runtime ftplugin/changelog.vim
 <			in your |.vimrc|.
 <Leader>o		Switches to the ChangeLog buffer opened for the
 			current directory, or opens it in a new buffer if it
@@ -462,11 +469,11 @@ g:changelog_date_entry_search
 The Changelog entries are inserted where they add the least amount of text.
 After figuring out the current date and user, the file is searched for an
 entry beginning with the current date and user and if found adds another item
-under it. If not found, a new entry and item is prepended to the beginning of
+under it.  If not found, a new entry and item is prepended to the beginning of
 the Changelog.
 
 
-FORTRAN							*fortran-plugin*
+FORTRAN							*ft-fortran-plugin*
 
 Options:
 'expandtab'	is switched on to avoid tabs as required by the Fortran
@@ -474,12 +481,12 @@ Options:
 'textwidth'	is set to 72 for fixed source format as required by the
 		Fortran standards and to 80 for free source format.
 'formatoptions' is set to break code and comment lines and to preserve long
-		lines. You can format comments with |gq|.
+		lines.  You can format comments with |gq|.
 For further discussion of fortran_have_tabs and the method used for the
-detection of source format see |fortran-syntax|.
+detection of source format see |ft-fortran-syntax|.
 
 
-MAIL							*mail-plugin*
+MAIL							*ft-mail-plugin*
 
 Options:
 'modeline'	is switched off to avoid the danger of trojan horses, and to
@@ -496,7 +503,7 @@ Local mappings:
 	to the end of the file in Normal mode.  This means "> " is inserted in
 	each line.
 
-MAN							*man-plugin* *:Man*
+MAN							*ft-man-plugin* *:Man*
 
 Displays a manual page in a nice way.  Also see the user manual
 |find-manpage|.
@@ -523,7 +530,7 @@ CTRL-]		Jump to the manual page for the word under the cursor.
 CTRL-T		Jump back to the previous manual page.
 
 
-RPM SPEC						*spec-plugin*
+RPM SPEC						*ft-spec-plugin*
 
 Since the text for this plugin is rather long it has been put in a separate
 file: |pi_spec.txt|.

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 7.0aa.  Last change: 2004 Dec 29
+*fold.txt*      For Vim version 7.0aa.  Last change: 2005 Sep 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -330,7 +330,7 @@ zC		Close all folds under the cursor recursively.  Folds that
 		'foldenable' will be set.
 
 							*za*
-za		When on a closed fold: open it. When folds are nested, you
+za		When on a closed fold: open it.  When folds are nested, you
 		may have to use "za" several times.  When a count is given,
 		that many closed folds are opened.
 		When on an open fold: close it and set 'foldenable'.  This
@@ -512,7 +512,8 @@ FOLDCOLUMN						*fold-foldcolumn*
 
 'foldcolumn' is a number, which sets the width for a column on the side of the
 window to indicate folds.  When it is zero, there is no foldcolumn.  A normal
-value is 4 or 5.  The minimal useful value is 2.  The maximum is 12.
+value is 4 or 5.  The minimal useful value is 2, although 1 still provides
+some information.  The maximum is 12.
 
 An open fold is indicated with a column that has a '-' at the top and '|'
 characters below it.  This column stops where the open fold stops.  When folds

runtime/doc/gui.txt

@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 7.0aa.  Last change: 2005 Jan 14
+*gui.txt*       For Vim version 7.0aa.  Last change: 2006 Feb 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -24,9 +24,9 @@ Other GUI documentation:
 1. Starting the GUI				*gui-start* *E229* *E233*
 
 First you must make sure you actually have a version of Vim with the GUI code
-included.  You can check this with the ":version" command, it should include
-"+GUI_Athena", "+GUI_BeOS", "+GUI_GTK", "+GUI_KDE", "+GUI_Motif" or
-"MS-Windows ... bit GUI version".
+included.  You can check this with the ":version" command, it says "with xxx
+GUI", where "xxx" is X11-Motif, X11-Athena, Photon, GTK, GTK2, etc., or
+"MS-Windows 32 bit GUI version".
 
 How to start the GUI depends on the system used.  Mostly you can run the
 GUI version of Vim with:
@@ -37,7 +37,8 @@ The X11 version of Vim can run both in GUI and in non-GUI mode.  See
 
 					*gui-init* *gvimrc* *.gvimrc* *_gvimrc*
 When the GUI starts up initializations are carried out, in this order:
-- The termcap options are reset to their default value for the GUI.
+- The 'term' option is set to "builgin_gui" and terminal options are reset to
+  their default value for the GUI |terminal-options|.
 - If the system menu file exists, it is sourced.  The name of this file is
   normally "$VIMRUNTIME/menu.vim".  You can check this with ":version".  Also
   see |$VIMRUNTIME|.  To skip loading the system menu include 'M' in
@@ -79,7 +80,7 @@ All this happens AFTER the normal Vim initializations, like reading your
 But the GUI window is only opened after all the initializations have been
 carried out.  If you want some commands to be executed just after opening the
 GUI window, use the |GUIEnter| autocommand event.  Example: >
-	:autocommand GUIEnter * winpos 100 50
+	:autocmd GUIEnter * winpos 100 50
 
 You can use the gvimrc files to set up your own customized menus (see |:menu|)
 and initialize other things that you may want to set up differently from the
@@ -184,7 +185,7 @@ When the scrollbar is dragged all the way down, the last line of the file
 will appear in the top of the window.
 
 If a window is shrunk to zero height (by the growth of another window) its
-scrollbar disappears. It reappears when the window is restored.
+scrollbar disappears.  It reappears when the window is restored.
 
 If a window is vertically split, it will get a scrollbar when it is the
 current window and when, taking the middle of the current window and drawing a
@@ -408,7 +409,7 @@ used - you should read whichever of these is appropriate now).
 							*clipboard*
 There is a special register for storing this selection, it is the "*
 register.  Nothing is put in here unless the information about what text is
-selected is about to change (eg with a left mouse click somewhere), or when
+selected is about to change (e.g. with a left mouse click somewhere), or when
 another application wants to paste the selected text.  Then the text is put
 in the "* register.  For example, to cut a line and make it the current
 selection/put it on the clipboard: >
@@ -504,7 +505,7 @@ floating menus that do not appear on the main menu bar.
 				*E328* *E329* *E337*
 To create a new menu item, use the ":menu" commands.  They are mostly like
 the ":map" set of commands but the first argument is a menu item name, given
-as a path of menus and submenus with a '.' between them. eg: >
+as a path of menus and submenus with a '.' between them, e.g.: >
 
    :menu File.Save  :w<CR>
    :inoremenu File.Save  <C-O>:w<CR>
@@ -648,9 +649,9 @@ simple.
 
 							*gui-toolbar*
 The toolbar is currently available in the Win32, Athena, Motif, GTK+ (X11),
-KDE and Photon GUI.  It should turn up in other GUIs in due course.  The default
-toolbar is setup in menu.vim.
-The display of the toolbar is controlled by the 'guioptions' letter 'T'. You
+KDE and Photon GUI.  It should turn up in other GUIs in due course.  The
+default toolbar is setup in menu.vim.
+The display of the toolbar is controlled by the 'guioptions' letter 'T'.  You
 can thus have menu & toolbar together, or either on its own, or neither.
 The appearance is controlled by the 'toolbar' option.  You can chose between
 an image, text or both.
@@ -661,7 +662,7 @@ level.  Vim interprets the items in this menu as follows:
 1)  If an "icon=" argument was specified, the file with this name is used.
     The file can either be specified with the full path or with the base name.
     In the last case it is searched for in the "bitmaps" directory in
-    'runtimepath', like in point 3).  Examples: >
+    'runtimepath', like in point 3.  Examples: >
 	:amenu icon=/usr/local/pixmaps/foo_icon.xpm ToolBar.Foo :echo "Foo"<CR>
 	:amenu icon=FooIcon ToolBar.Foo :echo "Foo"<CR>
 <   Note that in the first case the extension is included, while in the second
@@ -671,7 +672,7 @@ level.  Vim interprets the items in this menu as follows:
     A menu priority must come _after_ the icon argument: >
 	:amenu icon=foo 1.42 ToolBar.Foo :echo "42!"<CR>
 2)  An item called 'BuiltIn##', where ## is a number, is taken as number ## of
-    the built-in bitmaps available in Vim. Currently there are 31 numbered
+    the built-in bitmaps available in Vim.  Currently there are 31 numbered
     from 0 to 30 which cover most common editing operations |builtin-tools|. >
 	:amenu ToolBar.BuiltIn22 :call SearchNext("back")<CR>
 3)  An item with another name is first searched for in the directory
@@ -736,9 +737,9 @@ from the main menu bar.  You must then use the |:popup| or |:tearoff| command
 to display it.
 
 							*popup-menu*
-In the Win32, KDE, GTK+, Motif, Athena and Photon GUI, you can define the special
-menu "PopUp".  This is the menu that is displayed when the right mouse button
-is pressed, if 'mousemodel' is set to popup or popup_setpos.
+In the Win32, KDE, GTK+, Motif, Athena and Photon GUI, you can define the
+special menu "PopUp".  This is the menu that is displayed when the right mouse
+button is pressed, if 'mousemodel' is set to popup or popup_setpos.
 
 
 5.3 Showing What Menus Are Mapped To			*showing-menus*
@@ -747,7 +748,7 @@ To see what an existing menu is mapped to, use just one argument after the
 menu commands (just like you would with the ":map" commands).  If the menu
 specified is a submenu, then all menus under that hierarchy will be shown.
 If no argument is given after :menu at all, then ALL menu items are shown
-for the appropriate mode (eg, Command-line mode for :cmenu).
+for the appropriate mode (e.g., Command-line mode for :cmenu).
 
 Special characters in the list, just before the rhs:
 *	The menu was defined with "nore" to disallow remapping.
@@ -856,7 +857,7 @@ See section |42.4| in the user manual.
 
 When a tip is defined for a menu item, it appears in the command-line area
 when the mouse is over that item, much like a standard Windows menu hint in
-the status bar. (Except when Vim is in Command-line mode, when of course
+the status bar.  (Except when Vim is in Command-line mode, when of course
 nothing is displayed.)
 When a tip is defined for a ToolBar item, it appears as a tooltip when the
 mouse pauses over that button, in the usual fashion.  Use the |hl-Tooltip|
@@ -870,7 +871,7 @@ The tip is defined like this: >
 And delete it with: >
 	:tunmenu MyMenu.Hello
 
-Tooltips are currently only supported for the X11 and Win32 GUI. However, they
+Tooltips are currently only supported for the X11 and Win32 GUI.  However, they
 should appear for the other gui platforms in the not too distant future.
 
 The ":tmenu" command works just like other menu commands, it uses the same
@@ -897,9 +898,13 @@ it behaves in a strange way.
 				appear on the menu-bar (see |hidden-menus|).
 				{only available for Win32 and GTK GUI}
 
+:popu[p]! {name}		Like above, but use the position of the mouse
+				pointer instead of the cursor.
+
 Example: >
 	:popup File
-will make the "File" menu (if there is one) appear at the text cursor. >
+will make the "File" menu (if there is one) appear at the text cursor (mouse
+pointer if ! was used). >
 
 	:amenu ]Toolbar.Make	:make<CR>
 	:popup ]Toolbar
@@ -920,7 +925,7 @@ This section describes other features which are related to the GUI.
   get "<Modifiers-Key>".
 
 - In the GUI, the modifiers SHIFT, CTRL, and ALT (or META) may be used within
-  mappings of special keys and mouse events.  eg: :map <M-LeftDrag> <LeftDrag>
+  mappings of special keys and mouse events.  E.g.: :map <M-LeftDrag> <LeftDrag>
 
 - In the GUI, several normal keys may have modifiers in mappings etc, these
   are <Space>, <Tab>, <NL>, <CR>, <Esc>.
@@ -950,6 +955,9 @@ This section describes other features which are related to the GUI.
 	    endif
 	endif
 
+A recommended Japanese font is MS Mincho.  You can find info here:
+http://www.lexikan.com/mincho.htm
+
 ==============================================================================
 7. Shell Commands					*gui-shell*
 

runtime/doc/gui_w16.txt

@@ -1,4 +1,4 @@
-*gui_w16.txt*   For Vim version 7.0aa.  Last change: 2001 Sep 03
+*gui_w16.txt*   For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -21,32 +21,32 @@ Other relevant documentation:
 
 {Vi does not have a Windows GUI}
 
-The Win16 version of Vim will run on Windows 3.1 or later. It has not been
+The Win16 version of Vim will run on Windows 3.1 or later.  It has not been
 tested on 3.0, it probably won't work without being recompiled and
-modified. (but you really should upgrade to 3.11 anyway. :)
+modified.  (But you really should upgrade to 3.11 anyway. :)
 
 In most respects it behaves identically to the Win32 GUI version, including
-having a flat-style toolbar(!). The chief differences:
+having a flat-style toolbar(!).  The chief differences:
 
 1) Bold/Italic text is not available, to speed up repaint/reduce resource
-   usage. (You can re-instate this by undefining MSWIN16_FASTTEXT.)
+   usage.  (You can re-instate this by undefining MSWIN16_FASTTEXT.)
 2) No tearoff menu emulation.
 3) No OLE interface.
-4) No long filename support (of course)
+4) No long filename support (of course).
 5) No tooltips on toolbar buttons - instead they produce command-line tips
    like menu items do.
-6) Line length limited to 32767 characters (like 16-bit DOS version)
+6) Line length limited to 32767 characters (like 16-bit DOS version).
 
 
 ==============================================================================
 1. Starting the GUI					*win16-start*
 
 The Win16 GUI version of Vim will always start the GUI, no matter how you
-start it or what it's called. There is no 'console' version as such, but you
+start it or what it's called.  There is no 'console' version as such, but you
 can use one of the DOS versions in a DOS box.
 
 The Win16 GUI has an extra menu item:  "Window/Select Font".  It brings up the
-standard Windows font selector. Note that bold and italic fonts are not
+standard Windows font selector.  Note that bold and italic fonts are not
 supported in an attempt to maximize GDI drawing speed.
 
 Setting the menu height doesn't work for the Win16 GUI.
@@ -82,7 +82,7 @@ The clipboard works in the same way as the Win32 version: see |gui-clipboard|.
 4. Shell Commands					*win16-shell*
 
 Vim spawns a DOS window for external commands, to make it possible to run any
-DOS command. The window uses the _default.pif settings.
+DOS command.  The window uses the _default.pif settings.
 
 							*win16-!start*
 Normally, Vim waits for a command to complete before continuing (this makes
@@ -135,7 +135,7 @@ as the traditional interface shared with the console version.
 6.1 Dialogs
 
 The dialogs displayed by the "confirm" family (i.e. the 'confirm' option,
-|:confirm| command and |confirm()| function are GUI-based rather than the
+|:confirm| command and |confirm()| function) are GUI-based rather than the
 console-based ones used by other versions.  There is no option to change this.
 
 
@@ -157,7 +157,7 @@ PrintFile.  See $VIMRUNTIME/menu.vim for how it works by default.
 Using this should also work: >
 	:w >>prn
 
-Vim supports a number of standard MS Windows features. Some of these are
+Vim supports a number of standard MS Windows features.  Some of these are
 detailed elsewhere: see |'mouse'|, |win32-hidden-menus|.
 Also see |:simalt|
 
@@ -176,11 +176,11 @@ names with any Ex command.
 
 							*win16-truetype*
 It is recommended that you use a raster font and not a TrueType
-fixed-pitch font. e.g. Use Courier, not Courier New. This is not just
+fixed-pitch font.  E.g. use Courier, not Courier New.  This is not just
 to use less resources but because there are subtle bugs in the
-handling of fixed-pitch TrueType in Win3.1x. In particular, when you move
+handling of fixed-pitch TrueType in Win3.1x.  In particular, when you move
 a block cursor over a pipe character '|', the cursor is drawn in the wrong
-size and bits get left behind. This is a bug in the Win3.1x GDI, it doesn't
+size and bits get left behind.  This is a bug in the Win3.1x GDI, it doesn't
 happen if you run the exe under 95/NT.
 
  vim:tw=78:sw=4:ts=8:ft=help:norl:

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 7.0aa.  Last change: 2005 Jan 07
+*gui_w32.txt*   For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -58,7 +58,7 @@ of Windows 3.1 or 3.11.  See |win32s|.
 
 To set Vim as the default editor for a file type:
 1. Start a Windows Explorer
-2. Chose View/Options -> File Types
+2. Choose View/Options -> File Types
 3. Select the path to gvim for every file type that you want to use it for.
    (you can also use three spaces in the file type field, for files without an
    extension).
@@ -235,7 +235,7 @@ cancel an operation.  Use CTRL-Break for that.
 
 CTRL-Z is used for undo.  This means you can't suspend Vim.
 
-							*CTRL-V-alternative*
+						*CTRL-V-alternative* *CTRL-Q*
 Since CTRL-V is used to paste, you can't use it to start a blockwise Visual
 selection.  You can use CTRL-Q instead.  You can also use CTRL-Q in Insert
 mode and Command-line mode to get the old meaning of CTRL-V.  But CTRL-Q
@@ -262,8 +262,8 @@ question if you really want to kill the application, Vim may be killed too!
 
 In Windows 95, the window in which the commands are executed is always 25x80
 characters, to be as DOS compatible as possible (this matters!).  The default
-system font is used. On NT, the window will be the default you have set up for
-"Console" in Control Panel. On Win32s, the properties of the DOS box are
+system font is used.  On NT, the window will be the default you have set up for
+"Console" in Control Panel.  On Win32s, the properties of the DOS box are
 determined by _default.pif in the windows directory.
 
 							*msdos-mode*
@@ -283,7 +283,7 @@ sense for most shell commands which produce output for Vim to use).  If you
 want Vim to start a program and return immediately, you can use the following
 syntax on W95 & NT: >
 	:!start {command}
-On Win32s, you will have to go to another window instead. Don't forget that
+On Win32s, you will have to go to another window instead.  Don't forget that
 you must tell Windows 3.1x to keep executing a DOS command in the background
 while you switch back to Vim.
 
@@ -295,7 +295,7 @@ On Win32, the normal DOS colors can be used.  See |dos-colors|.
 Additionally the system configured colors can also be used.  These are known
 by the names Sys_XXX, where XXX is the appropriate system color name, from the
 following list (see the Win32 documentation for full descriptions).  Case is
-ignored. note: On Win32s not all of these colors are supported.
+ignored.  Note: On Win32s not all of these colors are supported.
 
 Sys_3DDKShadow		Sys_3DFace			Sys_BTNFace
 Sys_3DHilight		Sys_3DHighlight			Sys_BTNHilight
@@ -366,7 +366,7 @@ without having to go to the menu bar each time.
 This is most useful if you find yourself using a command buried in a sub-menu
 over and over again.
 The tearoff menus can be positioned where you like, and always stay just above
-the Main Vim window. You can get rid of them by closing them as usual; they
+the Main Vim window.  You can get rid of them by closing them as usual; they
 also of course close when you exit Vim.
 
 							*:tearoff* *:te*
@@ -400,7 +400,7 @@ The rules are:
       b) Parameters are separated by white space.
       c) A parameter can be enclosed in double quotes to include white space.
       d) A sequence of zero or more backslashes (\) and a double quote (")
-	is special. The effective number of backslashes is halved, rounded
+	is special.  The effective number of backslashes is halved, rounded
 	down.  An even number of backslashes reverses the acceptability of
 	spaces and tabs, an odd number of backslashes produces a literal
 	double quote.
@@ -429,7 +429,7 @@ The "File/Print" menu prints the text with syntax highlighting, see
 printer installed this should also work: >
 	:w >>prn
 
-Vim supports a number of standard MS Windows features. Some of these are
+Vim supports a number of standard MS Windows features.  Some of these are
 detailed elsewhere: see |'mouse'|, |win32-hidden-menus|.
 
 							*drag-n-drop-win32*
@@ -441,7 +441,7 @@ be opened as normal.  See |drag-n-drop|.
 			{not in Vi} {only for Win32 versions}
 
 Normally, Vim takes control of all Alt-<Key> combinations, to increase the
-number of possible mappings. This clashes with the standard use of Alt as the
+number of possible mappings.  This clashes with the standard use of Alt as the
 key for accessing menus.
 The quick way of getting standard behavior is to set the 'winaltkeys' option
 to "yes".  This however prevents you from mapping Alt keys at all.
@@ -449,18 +449,18 @@ Another way is to set 'winaltkeys' to "menu".  Menu shortcut keys are then
 handled by windows, other ALT keys can be mapped.  This doesn't allow a
 dependency on the current state though.
 To get round this, the :simalt command allows Vim (when 'winaltkeys' is not
-"yes") to fake a Windows-style Alt keypress. You can use this to map Alt key
+"yes") to fake a Windows-style Alt keypress.  You can use this to map Alt key
 combinations (or anything else for that matter) to produce standard Windows
-actions. Here are some examples: >
+actions.  Here are some examples: >
 
 	:map <M-f> :simalt f<CR>
 This makes Alt-F pop down the 'File' menu (with the stock Menu.vim) by
 simulating the keystrokes Alt, F. >
 	:map <M-Space> :simalt ~<CR>
-This maps Alt-Space to pop down the system menu for the Vim window. Note that
+This maps Alt-Space to pop down the system menu for the Vim window.  Note that
 ~ is used by simalt to represent the <Space> character. >
 	:map <C-n> :simalt ~n<CR>
-Maps Control-N to produce the keys Alt-Space followed by N. This minimizes the
+Maps Control-N to produce the keys Alt-Space followed by N.  This minimizes the
 Vim window via the system menu.
 
 						*intellimouse-wheel-problems*

runtime/doc/gui_x11.txt

@@ -1,4 +1,4 @@
-*gui_x11.txt*   For Vim version 7.0aa.  Last change: 2004 Dec 29
+*gui_x11.txt*   For Vim version 7.0aa.  Last change: 2005 Dec 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -113,7 +113,7 @@ same.  Note that some fonts that have the same point size don't have the same
 pixel size!  Additionally, the positioning of the fonts must be the same
 (ascent and descent).  You can check this with "xlsfonts -l {fontname}".
 
-If any of these things are also set with Vim commands, eg with
+If any of these things are also set with Vim commands, e.g. with
 ":set guifont=Screen15", then this will override the X resources (currently
 'guifont' is the only option that is supported).
 
@@ -437,59 +437,9 @@ command line argument).
 ==============================================================================
 7. KDE version					*gui-kde* *kde* *KDE* *KVim*
 
-NOTE: The KDE version is still under development.  It is not recommended for
-daily work.
-
-The KDE version of Vim works with KDE 2.x and KDE 3.x.
-KVim (name code for gui-kde) does not use traditional X settings for its
-configuration.
-Most important difference is the font handling, KVim uses QFont to display the
-text. To set your font use the following syntax :
->
-  :set guifont=Fixed\ [Misc]/10/-1/5/50/0/0/0/1/0
-<
-the '10' value is the font size, other settings concerns more specific Qt
-options which you should not need to care with.
-The suggested way to choose your font is through the font selection dialog
-available with the command :
-  :set guifont=*
-
-Note: X Font names are not supported any more, so if you use GVim too, you'll
-have to set something like this in your ~/.gvimrc : >
-
-  if has("gui_kde")
-	:set guifont=Fixed\ [Misc]/10/-1/5/50/0/0/0/1/0
-  else if has("gui_gtk")
-	:set guifont=-misc-fixed-medium-r-normal-*-*-100-*-*-c-*-iso10646-1
-  endif
-<
-							*antialias*
-KVim uses antialias for its font, so that the text looks better, to disable
-this you have to refer to Qt's documentation (export QT_XFT=0 for QT 2.x).
-
-KDE provides some other features, like being able to move the menubar and the
-toolbar wherever you want around the text area.
-
-							*kde-toolbar*
-KVim can be used with a KDE-look toolbar instead of Vim's default toolbar. To
-enable this feature you have to run the configure script with the
---enable-kde-toolbar switch. It may be moved to a runtime option in the
-future.
-
-							*DCOP*
-Since Vim 6.0, the new ClientServer feature has been added, it works fine in
-KVim too. KVim also provides its own communication scheme based on DCOP. This
-is mainly used by the |vimpart| but can freely be used by other applications
-or manually through KDE's DCOP tools. The DCOP servername is synchronized with
-the X11 servername so that it's easier to identify the same KVim through the
-two communication systems.
-
-							*vimpart* *vim-kpart*
-KVim developers are also working on a component to allow embedding of Vim into
-KDE's applications. As of this writing, the component is working and can be
-used in different KDE applications. New KDE applications should support it
-soon. To get more information about this component, refer to
-http://freehackers.org/kvim or to the KDE project.
+There is no KDE version of Vim.  There has been some work on a port using the
+Qt toolkit, but it never worked properly and it has been abandoned.  Work
+continues on Yzis: www.yzis.org.
 
 ==============================================================================
 8. Compiling						*gui-x11-compiling*

runtime/doc/hangulin.txt

@@ -1,4 +1,4 @@
-*hangulin.txt*  For Vim version 7.0aa.  Last change: 2001 Sep 03
+*hangulin.txt*  For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Chi-Deok Hwang and Sung-Hyun Nam
@@ -7,17 +7,17 @@ Introduction					*hangul*
 ------------
 It is to input hangul, the Korean language, with VIM GUI version.
 If you have a XIM program, you can use another |+xim| feature.
-Basically, it is for whom has no XIM program.
+Basically, it is for anybody who has no XIM program.
 
 Compile
 -------
-Next is a basic option. You can add any other configure option. >
+Next is a basic option.  You can add any other configure option. >
 
    ./configure --with-x --enable-multibyte --enable-fontset --enable-hangulinput
 
-And you should check the feature.h. If |+hangul_input| feature is enabled
+And you should check feature.h.  If |+hangul_input| feature is enabled
 by configure, you can select more options such as keyboard type, 2 bulsik
-or 3 bulsik. You can find keywords like next in there. >
+or 3 bulsik.  You can find keywords like next in there. >
 
 	#define HANGUL_DEFAULT_KEYBOARD 2
 	#define ESC_CHG_TO_ENG_MODE
@@ -38,7 +38,7 @@ You should add nexts to your global vimrc ($HOME/.vimrc). >
 Keyboard
 --------
 You can change keyboard type (2 bulsik or 3 bulsik) using VIM_KEYBOARD
-or HANGUL_KEYBOARD_TYPE environment variables. For sh, just do (2 bulsik): >
+or HANGUL_KEYBOARD_TYPE environment variables.  For sh, just do (2 bulsik): >
 
     export VIM_KEYBOARD="2"
 or >
@@ -67,9 +67,9 @@ $HOME/.gvimrc: >
 
 attention! the , (comma) or ; (semicolon)
 
-And there should be no ':set guifont'. If it exists, then Gvim ignores
-':set guifontset'. It means VIM runs without fontset supporting.
-So, you can see only English. Hangul does not be correctly displayed.
+And there should be no ':set guifont'.  If it exists, then Gvim ignores
+':set guifontset'.  It means VIM runs without fontset supporting.
+So, you can see only English.  Hangul does not be correctly displayed.
 
 After 'fontset' feature is enabled, VIM does not allow using 'font'.
 For example, if you use >
@@ -78,17 +78,17 @@ in your .gvimrc, then you should do for syntax >
    :hi Comment guifg=Cyan font=another_eng_font,another_your_font
 If you just do >
    :hi Comment font=another_eng_font
-then you can see a GOOD error message. Be careful!
+then you can see a GOOD error message.  Be careful!
 
 hangul_font width should be twice than english_font width.
 
 Unsupported Feature
 -------------------
-Johab font not yet supported. And I don't have any plan.
+Johab font not yet supported.  And I don't have any plan.
 If you really want to use johab font, you can use the
 hanguldraw.c in gau package.
 
-Hanja input not yet supported. And I don't have any plan.
+Hanja input not yet supported.  And I don't have any plan.
 If you really want to input hanja, just use VIM with hanterm.
 
 Bug or Comment

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 7.0aa.  Last change: 2004 Dec 30
+*help.txt*	For Vim version 7.0aa.  Last change: 2006 Feb 27
 
 			VIM - main help file
 									 k
@@ -17,13 +17,13 @@ Get specific help:  It is possible to go directly to whatever you want help
 		    It is possible to further specify the context:
 							*help-context*
 			  WHAT			PREPEND    EXAMPLE	~
-		      Normal mode commands     (nothing)   :help x
-		      Visual mode commands	  v_	   :help v_u
-		      Insert mode commands	  i_	   :help i_<Esc>
-		      Command-line commands	  :	   :help :quit
+		      Normal mode command      (nothing)   :help x
+		      Visual mode command 	  v_	   :help v_u
+		      Insert mode command 	  i_	   :help i_<Esc>
+		      Command-line command 	  :	   :help :quit
 		      Command-line editing	  c_	   :help c_<Del>
-		      Vim command arguments	  -	   :help -r
-		      Options			  '	   :help 'textwidth'
+		      Vim command argument 	  -	   :help -r
+		      Option 			  '	   :help 'textwidth'
   Search for help:  Type ":help word", then hit CTRL-D to see matching
 		    help entries for "word".
 
@@ -97,6 +97,7 @@ General subjects ~
 |quotes.txt|	remarks from users of Vim
 |todo.txt|	known problems and desired extensions
 |develop.txt|	development of Vim
+|debug.txt|	debugging Vim itself
 |uganda.txt|	Vim distribution conditions and what to do with your money
 
 Basic editing ~
@@ -121,7 +122,9 @@ Advanced editing ~
 |tagsrch.txt|	tags and special searches
 |quickfix.txt|	commands for a quick edit-compile-fix cycle
 |windows.txt|	commands for using multiple windows and buffers
+|tabpage.txt|	commands for using multiple tab pages
 |syntax.txt|	syntax highlighting
+|spell.txt|	spell checking
 |diff.txt|	working with two or three versions of the same file
 |autocmd.txt|	automatically executing commands on an event
 |filetype.txt|	settings done specifically for a type of file
@@ -184,9 +187,11 @@ Remarks about specific systems ~
 |os_win32.txt|	MS-Windows 95/98/NT
 						*standard-plugin-list*
 Standard plugins ~
-|pi_netrw.txt|	Reading and writing files over a network
 |pi_gzip.txt|	Reading and writing compressed files
-|pi_expl.txt|	File explorer
+|pi_netrw.txt|	Reading and writing files over a network
+|pi_paren.txt|	Highlight matching parens
+|pi_tar.txt|	Tar file explorer
+|pi_zip.txt|	Zip archive explorer
 
 LOCAL ADDITIONS:				*local-additions*
 

runtime/doc/if_cscop.txt

@@ -1,4 +1,4 @@
-*if_cscop.txt*  For Vim version 7.0aa.  Last change: 2004 Oct 21
+*if_cscop.txt*  For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Andy Kahn
@@ -208,6 +208,11 @@ The available subcommands are:
 
 	    USAGE   :cs show
 
+							*:lcscope* *:lcs*
+This command is same as the ":cscope" command, except when the
+'cscopequickfix' option is set, the location list for the current window is
+used instead of the quickfix list to show the cscope results.
+
 							*:cstag* *E257* *E562*
 If you use cscope as well as ctags, |:cstag| allows you to search one or
 the other before making a jump.  For example, you can choose to first
@@ -239,12 +244,12 @@ started will have no effect!
 					    *cscopequickfix* *csqf* *E469*
 {not available when compiled without the |+quickfix| feature}
 'cscopequickfix' specifies whether to use quickfix window to show cscope
-results. This is a list of comma-separated values. Each item consists of
+results.  This is a list of comma-separated values. Each item consists of
 |cscope-find| command (s, g, d, c, t, e, f or i) and flag (+, - or 0).
 '+' indicates that results must be appended to quickfix window,
 '-' implies previous results clearance, '0' or command absence - don't use
-quickfix. Search is performed from start until first command occurrence.
-The default value is "" (don't use quickfix anyway). The following value
+quickfix.  Search is performed from start until first command occurrence.
+The default value is "" (don't use quickfix anyway).  The following value
 seems to be useful: >
 	:set cscopequickfix=s-,c-,d-,i-,t-,e-
 <
@@ -472,7 +477,7 @@ cscope within Vim to him.
 							*cscope-win32*
 For a cscope version for Win32 see: http://iamphet.nm.ru/cscope/index.html
 
-Win32 support was added by Sergey Khorev <khorev@softlab.ru>. Contact him
-if you have Win32-specific issues.
+Win32 support was added by Sergey Khorev <sergey.khorev@gmail.com>.  Contact
+him if you have Win32-specific issues.
 
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_mzsch.txt

@@ -1,4 +1,4 @@
-*if_mzsch.txt*  For Vim version 7.0aa.  Last change: 2005 Jan 23
+*if_mzsch.txt*  For Vim version 7.0aa.  Last change: 2006 Jan 05
 
 
 		  VIM REFERENCE MANUAL    by Sergey Khorev
@@ -10,6 +10,7 @@ The MzScheme Interface to Vim				*mzscheme* *MzScheme*
 2. Examples				|mzscheme-examples|
 3. Threads				|mzscheme-threads|
 4. The Vim access procedures		|mzscheme-vim|
+5. Dynamic loading			|mzscheme-dynamic|
 
 {Vi does not have any of these commands}
 
@@ -110,6 +111,9 @@ something like this in your .vimrc (EOFs should not have indentation): >
 <
 
 The global namespace just instantiated this module with the prefix "vimext:".
+							*mzscheme-sandbox*
+When executed in the |sandbox|, access to some filesystem and Vim interface
+procedures is restricted.
 
 ==============================================================================
 2. Examples						*mzscheme-examples*
@@ -240,5 +244,23 @@ Windows							    *mzscheme-window*
 				    a pair (linenr . column).
     (set-cursor (line . col) [window])  Set cursor position.
 
+==============================================================================
+5. Dynamic loading					*mzscheme-dynamic*
+
+On MS-Windows the MzScheme libraries can be loaded dynamically. The |:version|
+output then includes |+mzscheme/dyn|.
+
+This means that Vim will search for the MzScheme DLL files only when needed.
+When you don't use the MzScheme interface you don't need them, thus you can
+use Vim without these DLL files.
+
+To use the MzScheme interface the MzScheme DLLs must be in your search path.
+In a console window type "path" to see what directories are used.
+
+The names of the DLLs must match the MzScheme version Vim was compiled with.
+For MzScheme version 209 they will be "libmzsch209_000.dll" and
+"libmzgc209_000.dll". To know for sure edit "gvim.exe" and search for 
+"libmzsch\d\d\d_\d\d\d\.dll\c".
+
 ======================================================================
   vim:tw=78:ts=8:sts=4:ft=help:norl:

runtime/doc/if_ole.txt

@@ -1,4 +1,4 @@
-*if_ole.txt*    For Vim version 7.0aa.  Last change: 2004 Dec 09
+*if_ole.txt*    For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -22,7 +22,7 @@ An alternative is using the client-server communication |clientserver|.
 1. Activation						*ole-activation*
 
 Vim acts as an OLE automation server, accessible from any automation client,
-for example, Visual Basic, Python, or Perl. The Vim application "name" (its
+for example, Visual Basic, Python, or Perl.  The Vim application "name" (its
 "ProgID", in OLE terminology) is "Vim.Application".
 
 Hence, in order to start a Vim instance (or connect to an already running
@@ -41,8 +41,8 @@ instance), code similar to the following should be used:
 	$vim = new Win32::OLE 'Vim.Application';
 
 Vim does not support acting as a "hidden" OLE server, like some other OLE
-Automation servers. When a client starts up an instance of Vim, that instance
-is immediately visible. Simply closing the OLE connection to the Vim instance
+Automation servers.  When a client starts up an instance of Vim, that instance
+is immediately visible.  Simply closing the OLE connection to the Vim instance
 is not enough to shut down the Vim instance - it is necessary to explicitly
 execute a quit command (for example, :qa!, :wqa).
 
@@ -54,17 +54,17 @@ Vim exposes four methods for use by clients.
 							*ole-sendkeys*
 SendKeys(keys)		Execute a series of keys.
 
-This method takes a single parameter, which is a string of keystrokes. These
+This method takes a single parameter, which is a string of keystrokes.  These
 keystrokes are executed exactly as if they had been types in at the keyboard.
 Special keys can be given using their <..> names, as for the right hand side
-of a mapping. Note: Execution of the Ex "normal" command is not supported -
+of a mapping.  Note: Execution of the Ex "normal" command is not supported -
 see below |ole-normal|.
 
 Examples (Visual Basic syntax) >
 	Vim.SendKeys "ihello<Esc>"
 	Vim.SendKeys "ma1GV4jy`a"
 
-These examples assume that Vim starts in Normal mode. To force Normal mode,
+These examples assume that Vim starts in Normal mode.  To force Normal mode,
 start the key sequence with CTRL-\ CTRL-N as in >
 
 	Vim.SendKeys "<C-\><C-N>ihello<Esc>"
@@ -109,7 +109,7 @@ Example (Visual Basic syntax) >
 
 Due to the way Vim processes OLE Automation commands, combined with the method
 of implementation of the ex command :normal, it is not possible to execute the
-:normal command via OLE automation. Any attempt to do so will fail, probably
+:normal command via OLE automation.  Any attempt to do so will fail, probably
 harmlessly, although possibly in unpredictable ways.
 
 There is currently no practical way to trap this situation, and users must
@@ -118,7 +118,7 @@ simply be aware of the limitation.
 4. Registration					*ole-registration* *E243*
 
 Before Vim will act as an OLE server, it must be registered in the system
-registry. In order to do this, Vim should be run with a single parameter of
+registry.  In order to do this, Vim should be run with a single parameter of
 "-register".
 							*-register*  >
 	gvim -register
@@ -131,9 +131,9 @@ In some situations registering is not possible.  This happens when the
 registry is not writable.  If you run into this problem you need to run gvim
 as "Administrator".
 
-Once vim is registered, the application path is stored in the registry. Before
-moving, deleting, or upgrading Vim, the registry entries should be removed
-using the "-unregister" switch.
+Once vim is registered, the application path is stored in the registry.
+Before moving, deleting, or upgrading Vim, the registry entries should be
+removed using the "-unregister" switch.
 							*-unregister*  >
 	gvim -unregister
 

runtime/doc/if_perl.txt

@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 7.0aa.  Last change: 2004 Aug 30
+*if_perl.txt*   For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege
@@ -9,6 +9,7 @@ Perl and Vim				*perl* *Perl*
 1. Editing Perl files			|perl-editing|
 2. Compiling VIM with Perl interface	|perl-compiling|
 3. Using the Perl interface		|perl-using|
+4. Dynamic loading			|perl-dynamic|
 
 {Vi does not have any of these commands}
 
@@ -18,7 +19,7 @@ The Perl interface only works when Vim was compiled with the |+perl| feature.
 1. Editing Perl files					*perl-editing*
 
 Vim syntax highlighting supports Perl and POD files.  Vim assumes a file is
-Perl code if the filename has a .pl or .pm suffix. Vim also examines the first
+Perl code if the filename has a .pl or .pm suffix.  Vim also examines the first
 line of a file, regardless of the filename suffix, to check if a file is a
 Perl script (see scripts.vim in Vim's syntax directory).  Vim assumes a file
 is POD text if the filename has a .POD suffix.
@@ -50,7 +51,7 @@ http://www.perl.com/CPAN/ports/nt/Standard/x86/
 3. Using the Perl interface				*perl-using*
 
 							*:perl* *:pe*
-:pe[rl] {cmd}		Execute Perl command {cmd}. The current package
+:pe[rl] {cmd}		Execute Perl command {cmd}.  The current package
 			is "main".
 
 :pe[rl] << {endpattern}
@@ -84,7 +85,7 @@ Example vim script: >
 							*:perldo* *:perld*
 :[range]perld[o] {cmd}	Execute Perl command {cmd} for each line in the
 			[range], with $_ being set to the text of each line in
-			turn, without a trailing <EOL>. Setting $_ will change
+			turn, without a trailing <EOL>.  Setting $_ will change
 			the text, but note that it is not possible to add or
 			delete lines using this command.
 			The default for [range] is the whole file: "1,$".
@@ -211,7 +212,7 @@ Buffer->Count()		Returns the number of lines in the Buffer.
 							*perl-Get*
 Buffer->Get({lnum}, {lnum}?, ...)
 			Returns a text string of line {lnum} in the Buffer
-			for each {lnum} specified. An array can be passed
+			for each {lnum} specified.  An array can be passed
 			with a list of {lnum}'s specified.
 
 							*perl-Delete*
@@ -259,4 +260,22 @@ function: >
     endif
 Note that "EOF" must be at the start of the line.
 
+==============================================================================
+4. Dynamic loading					*perl-dynamic*
+
+On MS-Windows the Perl library can be loaded dynamically.  The |:version|
+output then includes |+perl/dyn|.
+
+This means that Vim will search for the Perl DLL file only when needed.  When
+you don't use the Perl interface you don't need it, thus you can use Vim
+without this DLL file.
+
+To use the Perl interface the Perl DLL must be in your search path.  In a
+console window type "path" to see what directories are used.
+
+The name of the DLL must match the Perl version Vim was compiled with.
+Currently the name is "perl58.dll".  That is for Perl 5.8.  To know for
+sure edit "gvim.exe" and search for "perl\d*.dll\c".
+
+==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 7.0aa.  Last change: 2004 Jul 25
+*if_pyth.txt*   For Vim version 7.0aa.  Last change: 2006 Jan 20
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -11,6 +11,7 @@ The Python Interface to Vim				*python* *Python*
 3. Buffer objects		|python-buffer|
 4. Range objects		|python-range|
 5. Window objects		|python-window|
+6. Dynamic loading		|python-dynamic|
 
 {Vi does not have any of these commands}
 
@@ -85,7 +86,7 @@ just like in the Python interpreter.)
 2. The vim module					*python-vim*
 
 Python code gets all of its access to vim (with one exception - see
-|python-output| below) via the "vim" module. The vim module implements two
+|python-output| below) via the "vim" module.  The vim module implements two
 methods, three constants, and one error object.  You need to import the vim
 module before using it: >
 	:python import vim
@@ -113,7 +114,7 @@ Overview >
 Methods of the "vim" module
 
 vim.command(str)					*python-command*
-	Executes the vim (ex-mode) command str. Returns None.
+	Executes the vim (ex-mode) command str.  Returns None.
 	Examples: >
 	    :py vim.command("set tw=72")
 	    :py vim.command("%s/aaa/bbb/g")
@@ -130,14 +131,24 @@ vim.command(str)					*python-command*
 
 vim.eval(str)						*python-eval*
 	Evaluates the expression str using the vim internal expression
-	evaluator (see |expression|). Returns the expression result as a
-	string.
+	evaluator (see |expression|).  Returns the expression result as:
+	- a string if the Vim expression evaluates to a string or number
+	- a list if the Vim expression evaluates to a Vim list
+  	- a dictionary if the Vim expression evaluates to a Vim dictionary
+	Dictionaries and lists are recursively expanded.
 	Examples: >
 	    :py text_width = vim.eval("&tw")
 	    :py str = vim.eval("12+12")		# NB result is a string! Use
 						# string.atoi() to convert to
 						# a number.
 
+	    :py tagList = vim.eval('taglist("eval_expr")') 
+<	The latter will return a python list of python dicts, for instance:
+	[{'cmd': '/^eval_expr(arg, nextcmd)$/', 'static': 0, 'name':
+	'eval_expr', 'kind': 'f', 'filename': './src/eval.c'}]
+
+
+
 Error object of the "vim" module
 
 vim.error						*python-error*
@@ -156,7 +167,7 @@ Constants of the "vim" module
 	to which the variables referred.
 
 vim.buffers						*python-buffers*
-	A sequence object providing access to the list of vim buffers. The
+	A sequence object providing access to the list of vim buffers.  The
 	object supports the following operations: >
 	    :py b = vim.buffers[i]	# Indexing (read-only)
 	    :py b in vim.buffers	# Membership test
@@ -164,7 +175,7 @@ vim.buffers						*python-buffers*
 	    :py for b in vim.buffers:	# Sequential access
 <
 vim.windows						*python-windows*
-	A sequence object providing access to the list of vim windows. The
+	A sequence object providing access to the list of vim windows.  The
 	object supports the following operations: >
 	    :py w = vim.windows[i]	# Indexing (read-only)
 	    :py w in vim.windows	# Membership test
@@ -179,10 +190,10 @@ vim.current						*python-current*
 		vim.current.window	The current window (RO)		Window
 		vim.current.range	The current line range (RO)	Range
 
-	The last case deserves a little explanation. When the :python or
+	The last case deserves a little explanation.  When the :python or
 	:pyfile command specifies a range, this range of lines becomes the
-	"current range". A range is a bit like a buffer, but with all access
-	restricted to a subset of lines. See |python-range| for more details.
+	"current range".  A range is a bit like a buffer, but with all access
+	restricted to a subset of lines.  See |python-range| for more details.
 
 
 Output from Python					*python-output*
@@ -197,31 +208,31 @@ Output from Python					*python-output*
 
 							*python-input*
 	Input (via sys.stdin, including input() and raw_input()) is not
-	supported, and may cause the program to crash. This should probably be
+	supported, and may cause the program to crash.  This should probably be
 	fixed.
 
 ==============================================================================
 3. Buffer objects					*python-buffer*
 
-Buffer objects represent vim buffers. You can obtain them in a number of ways:
+Buffer objects represent vim buffers.  You can obtain them in a number of ways:
 	- via vim.current.buffer (|python-current|)
 	- from indexing vim.buffers (|python-buffers|)
 	- from the "buffer" attribute of a window (|python-window|)
 
 Buffer objects have one read-only attribute - name - the full file name for
-the buffer. They also have three methods (append, mark, and range; see below).
+the buffer.  They also have three methods (append, mark, and range; see below).
 
-You can also treat buffer objects as sequence objects. In this context, they
+You can also treat buffer objects as sequence objects.  In this context, they
 act as if they were lists (yes, they are mutable) of strings, with each
-element being a line of the buffer. All of the usual sequence operations,
+element being a line of the buffer.  All of the usual sequence operations,
 including indexing, index assignment, slicing and slice assignment, work as
-you would expect. Note that the result of indexing (slicing) a buffer is a
-string (list of strings). This has one unusual consequence - b[:] is different
-from b. In particular, "b[:] = None" deletes the whole of the buffer, whereas
+you would expect.  Note that the result of indexing (slicing) a buffer is a
+string (list of strings).  This has one unusual consequence - b[:] is different
+from b.  In particular, "b[:] = None" deletes the whole of the buffer, whereas
 "b = None" merely updates the variable b, with no effect on the buffer.
 
-Buffer indexes start at zero, as is normal in Python. This differs from vim
-line numbers, which start from 1. This is particularly relevant when dealing
+Buffer indexes start at zero, as is normal in Python.  This differs from vim
+line numbers, which start from 1.  This is particularly relevant when dealing
 with marks (see below) which use vim line numbers.
 
 The buffer object methods are:
@@ -255,12 +266,12 @@ Examples (assume b is the current buffer) >
 ==============================================================================
 4. Range objects					*python-range*
 
-Range objects represent a part of a vim buffer. You can obtain them in a
+Range objects represent a part of a vim buffer.  You can obtain them in a
 number of ways:
 	- via vim.current.range (|python-current|)
 	- from a buffer's range() method (|python-buffer|)
 
-A range object is almost identical in operation to a buffer object. However,
+A range object is almost identical in operation to a buffer object.  However,
 all operations are restricted to the lines within the range (this line range
 can, of course, change as a result of slice assignments, line deletions, or
 the range.append() method).
@@ -283,11 +294,11 @@ Example (assume r is the current range):
 ==============================================================================
 5. Window objects					*python-window*
 
-Window objects represent vim windows. You can obtain them in a number of ways:
+Window objects represent vim windows.  You can obtain them in a number of ways:
 	- via vim.current.window (|python-current|)
 	- from indexing vim.windows (|python-windows|)
 
-You can manipulate window objects only through their attributes. They have no
+You can manipulate window objects only through their attributes.  They have no
 methods, and no sequence or other interface.
 
 Window attributes are:
@@ -299,5 +310,22 @@ Window attributes are:
 The height attribute is writable only if the screen is split horizontally.
 The width attribute is writable only if the screen is split vertically.
 
+==============================================================================
+6. Dynamic loading					*python-dynamic*
+
+On MS-Windows the Python library can be loaded dynamically.  The |:version|
+output then includes |+python/dyn|.
+
+This means that Vim will search for the Python DLL file only when needed.
+When you don't use the Python interface you don't need it, thus you can use
+Vim without this DLL file.
+
+To use the Python interface the Python DLL must be in your search path.  In a
+console window type "path" to see what directories are used.
+
+The name of the DLL must match the Python version Vim was compiled with.
+Currently the name is "python24.dll".  That is for Python 2.4.  To know for
+sure edit "gvim.exe" and search for "python\d*.dll\c".
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_ruby.txt

@@ -1,4 +1,4 @@
-*if_ruby.txt*   For Vim version 7.0aa.  Last change: 2004 Mar 14
+*if_ruby.txt*   For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL    by Shugo Maeda
@@ -11,6 +11,7 @@ The Ruby Interface to Vim				*ruby* *Ruby*
 3. VIM::Buffer objects		|ruby-buffer|
 4. VIM::Window objects		|ruby-window|
 5. Global variables		|ruby-globals|
+6. Dynamic loading		|ruby-dynamic|
 
 {Vi does not have any of these commands}
 			*E266* *E267* *E268* *E269* *E270* *E271* *E272* *E273*
@@ -32,7 +33,7 @@ downloading Ruby there.
 			Execute Ruby script {script}.
 			{endpattern} must NOT be preceded by any white space.
 			If {endpattern} is omitted, it defaults to a dot '.'
-			like for the |:append| and |:insert| commands. This
+			like for the |:append| and |:insert| commands.  This
 			form of the |:ruby| command is mainly useful for
 			including ruby code in vim scripts.
 			Note: This command doesn't work when the Ruby feature
@@ -60,7 +61,7 @@ Example Vim script: >
 						*:rubydo* *:rubyd* *E265*
 :[range]rubyd[o] {cmd}	Evaluate Ruby command {cmd} for each line in the
 			[range], with $_ being set to the text of each line in
-			turn, without a trailing <EOL>. Setting $_ will change
+			turn, without a trailing <EOL>.  Setting $_ will change
 			the text, but note that it is not possible to add or
 			delete lines using this command.
 			The default for [range] is the whole file: "1,$".
@@ -115,7 +116,7 @@ VIM::command({cmd})
 							*ruby-evaluate*
 VIM::evaluate({expr})
 	Evaluates {expr} using the vim internal expression evaluator (see
-	|expression|). Returns the expression result as a string.
+	|expression|).  Returns the expression result as a string.
 
 ==============================================================================
 3. VIM::Buffer objects					*ruby-buffer*
@@ -126,7 +127,7 @@ Class Methods:
 
 current		Returns the current buffer object.
 count		Returns the number of buffers.
-self[{n}]	Returns the buffer object for the number {n}. The first number
+self[{n}]	Returns the buffer object for the number {n}.  The first number
 		is 0.
 
 Methods:
@@ -151,7 +152,7 @@ Class Methods:
 
 current		Returns the current window object.
 count		Returns the number of windows.
-self[{n}]	Returns the window object for the number {n}. The first number
+self[{n}]	Returns the window object for the number {n}.  The first number
 		is 0.
 
 Methods:
@@ -159,17 +160,36 @@ Methods:
 buffer		Returns the buffer displayed in the window.
 height		Returns the height of the window.
 height = {n}	Sets the window height to {n}.
+width		Returns the width of the window.
+width = {n}	Sets the window width to {n}.
 cursor		Returns a [row, col] array for the cursor position.
 cursor = [{row}, {col}]
 		Sets the cursor position to {row} and {col}.
 
 ==============================================================================
-4. Global variables					*ruby-globals*
+5. Global variables					*ruby-globals*
 
 There are two global variables.
 
 $curwin		The current window object.
 $curbuf		The current buffer object.
 
+==============================================================================
+6. Dynamic loading					*ruby-dynamic*
+
+On MS-Windows the Ruby library can be loaded dynamically.  The |:version|
+output then includes |+ruby/dyn|.
+
+This means that Vim will search for the Ruby DLL file only when needed.  When
+you don't use the Ruby interface you don't need it, thus you can use Vim
+without this DLL file.
+
+To use the Ruby interface the Ruby DLL must be in your search path.  In a
+console window type "path" to see what directories are used.
+
+The name of the DLL must match the Ruby version Vim was compiled with.
+Currently the name is "ruby18.dll".  That is for Ruby 1.8.  To know for sure
+edit "gvim.exe" and search for "ruby\d*.dll\c".
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_sniff.txt

@@ -1,4 +1,4 @@
-*if_sniff.txt*	For Vim version 7.0aa.  Last change: 2001 Sep 03
+*if_sniff.txt*	For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL
@@ -45,7 +45,7 @@ edit source code.  On the other hand, you can send queries to SNiFF+ with the
 :sni[ff]		    Display all possible requests and the connection
 			    status
 
-Most requests require a symbol (identifier) as parameter. If it is omitted,
+Most requests require a symbol (identifier) as parameter.  If it is omitted,
 Vim will use the current word under the cursor.
 The available requests are listed below:
 
@@ -54,7 +54,7 @@ request		      mapping	description
 connect			sc	Establish connection with SNiFF+.
 				Make sure SNiFF+ is prepared for this in the
 				Preferences
-disconnect		sq	Disconnect from SNiFF+. You can reconnect any
+disconnect		sq	Disconnect from SNiFF+.  You can reconnect any
 				time with :sniff connect (or 'sc')
 toggle			st	Toggle between implementation
 				and definition file
@@ -80,7 +80,7 @@ show-docu		sd	Show documentation of symbol
 gen-docu		sD	Generate documentation of symbol
 
 The mappings are defined in a file 'sniff.vim', which is part of every SNiFF+
-product ($SNIFF_DIR/config/sniff.vim). This file is sourced whenever Vim
+product ($SNIFF_DIR/config/sniff.vim).  This file is sourced whenever Vim
 connects to SNiFF+.
 
 ==============================================================================

runtime/doc/if_tcl.txt

@@ -1,4 +1,4 @@
-*if_tcl.txt*    For Vim version 7.0aa.  Last change: 2004 Jan 17
+*if_tcl.txt*    For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL    by Ingo Wilken
@@ -14,6 +14,7 @@ The Tcl Interface to Vim				*tcl* *Tcl* *TCL*
 6. Miscellaneous; Output from Tcl	|tcl-misc| |tcl-output|
 7. Known bugs & problems		|tcl-bugs|
 8. Examples				|tcl-examples|
+9. Dynamic loading			|tcl-dynamic|
 
 {Vi does not have any of these commands} *E280* *E281*
 
@@ -36,7 +37,7 @@ comments, ideas etc to <Ingo.Wilken@informatik.uni-oldenburg.de>
 			wasn't compiled in.  To avoid errors, see
 			|script-here|.
 
-{endmarker} must NOT be preceded by any white space. If {endmarker} is
+{endmarker} must NOT be preceded by any white space.  If {endmarker} is
 omitted from after the "<<", a dot '.' must be used after {script}, like for
 the |:append| and |:insert| commands.
 This form of the |:tcl| command is mainly useful for including tcl code in Vim
@@ -152,7 +153,7 @@ Commands:
 
 	::vim::window {option}				*tcl-window*
 	Provides access to vim windows.  Currently only the "list" option is
-	implemented. This creates a window command (see |tcl-window-cmds|) for
+	implemented.  This creates a window command (see |tcl-window-cmds|) for
 	each window, and returns a list of the command names as the result.
 	Example: >
 		set wins [::vim::window list]
@@ -227,7 +228,7 @@ The ::vim::current(window) variable contains the name of the window command
 for the current window.  A window command is automatically deleted when the
 corresponding vim window is closed.
 
-Lets assume the name of the window command is stored in the Tcl variable "win",
+Let's assume the name of the window command is stored in the Tcl variable "win",
 i.e. "$win" calls the command.  The following options are available: >
 
 	$win buffer		# Create Tcl command for window's buffer.
@@ -306,7 +307,7 @@ changed, all marks in the buffer are automatically adjusted.  Any changes to
 the buffer's contents made by Tcl commands can be undone with the "undo" vim
 command (see |undo|).
 
-Lets assume the name of the buffer command is stored in the Tcl variable "buf",
+Let's assume the name of the buffer command is stored in the Tcl variable "buf",
 i.e. "$buf" calls the command.  The following options are available: >
 
 	$buf append {n} {str}	# Append a line to buffer, after line {n}.
@@ -497,7 +498,7 @@ This procedure runs an ex command on each buffer (idea stolen from Ron Aaron):
 	}
 Use it like this:
 	:tcl eachbuf %s/foo/bar/g
-Be careful with Tcl's string and backslash substitution, tough. If in doubt,
+Be careful with Tcl's string and backslash substitution, tough.  If in doubt,
 surround the ex command with curly braces.
 
 
@@ -508,5 +509,22 @@ startup file (usually "~/.vimrc" on Unix):
 		tclfile ~/.vimrc.tcl
 	endif
 
+==============================================================================
+9. Dynamic loading					*tcl-dynamic*
+
+On MS-Windows the Tcl library can be loaded dynamically.  The |:version|
+output then includes |+tcl/dyn|.
+
+This means that Vim will search for the Tcl DLL file only when needed.  When
+you don't use the Tcl interface you don't need it, thus you can use Vim
+without this DLL file.
+
+To use the Tcl interface the Tcl DLL must be in your search path.  In a
+console window type "path" to see what directories are used.
+
+The name of the DLL must match the Tcl version Vim was compiled with.
+Currently the name is "tcl83.dll".  That is for Tcl 8.3.  To know for sure
+edit "gvim.exe" and search for "tcl\d*.dll\c".
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/indent.txt

@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 7.0aa.  Last change: 2004 Sep 02
+*indent.txt*    For Vim version 7.0aa.  Last change: 2005 Aug 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -237,7 +237,7 @@ assume a 'shiftwidth' of 4.
 				}		  }
 <
 	bN    If N != 0 Vim will align a final "break" with the case label,
-	      so that case..break looks like a sort of block. (default: 0).
+	      so that case..break looks like a sort of block.  (default: 0).
 
 		cino=		    cino=b1 >
 		  switch (x)	      switch(x)
@@ -325,7 +325,7 @@ assume a 'shiftwidth' of 4.
 		  ********/		    ********/
 <	      (Example uses ":set comments& comments-=s1:/* comments^=s0:/*")
 
-	/N    Indent comment lines N characters extra. (default 0).
+	/N    Indent comment lines N characters extra.  (default 0).
 		cino=			  cino=/4 >
 		  a = b;		    a = b;
 		  /* comment */			/* comment */
@@ -381,7 +381,7 @@ assume a 'shiftwidth' of 4.
 	      the last non-white character in its line and it is not the
 	      closing parentheses, indent the following line N characters
 	      relative to the outer context (i.e. start of the line or the
-	      next unclosed parentheses). (default: 0).
+	      next unclosed parentheses).  (default: 0).
 
 		cino=(0			   cino=(0,W4 >
 		  a_long_line(		    a_long_line(
@@ -406,7 +406,7 @@ assume a 'shiftwidth' of 4.
 <
 					*java-cinoptions* *java-indenting*
 	jN    Indent java anonymous classes correctly.  The value 'N' is
-	      currently unused but must be non-zero (e.g. 'j1'). 'j1' will
+	      currently unused but must be non-zero (e.g. 'j1').  'j1' will
 	      indent for example the following code snippet correctly: >
 
 		object.add(new ChangeListener() {
@@ -449,33 +449,33 @@ $VIMRUNTIME/indent directory for examples.
 REMARKS ABOUT SPECIFIC INDENT FILES ~
 
 
-FORTRAN							*fortran-indent*
+FORTRAN							*ft-fortran-indent*
 
-Block if, select case, and where constructs are indented. Comments, labelled
+Block if, select case, and where constructs are indented.  Comments, labelled
 statements and continuation lines are indented if the Fortran is in free
 source form, whereas they are not indented if the Fortran is in fixed source
-form because of the left margin requirements. Hence manual indent corrections
+form because of the left margin requirements.  Hence manual indent corrections
 will be necessary for labelled statements and continuation lines when fixed
-source form is being used. For further discussion of the method used for the
-detection of source format see |fortran-syntax|.
+source form is being used.  For further discussion of the method used for the
+detection of source format see |ft-fortran-syntax|.
 
 Do loops ~
-All do loops are left unindented by default. Do loops can be unstructured in
+All do loops are left unindented by default.  Do loops can be unstructured in
 Fortran with (possibly multiple) loops ending on a labelled executable
-statement of almost arbitrary type. Correct indentation requires
-compiler-quality parsing. Old code with do loops ending on labelled statements
+statement of almost arbitrary type.  Correct indentation requires
+compiler-quality parsing.  Old code with do loops ending on labelled statements
 of arbitrary type can be indented with elaborate programs such as Tidy
-(http://www.unb.ca/chem/ajit/f_tidy.htm). Structured do/continue loops are
+(http://www.unb.ca/chem/ajit/f_tidy.htm).  Structured do/continue loops are
 also left unindented because continue statements are also used for purposes
-other than ending a do loop. Programs such as Tidy can convert structured
-do/continue loops to the do/enddo form. Do loops of the do/enddo variety can
-be indented. If you use only structured loops of the do/enddo form, you should
+other than ending a do loop.  Programs such as Tidy can convert structured
+do/continue loops to the do/enddo form.  Do loops of the do/enddo variety can
+be indented.  If you use only structured loops of the do/enddo form, you should
 declare this by setting the fortran_do_enddo variable in your .vimrc as
 follows >
 
    let fortran_do_enddo=1
 
-in which case do loops will be indented. If all your loops are of do/enddo
+in which case do loops will be indented.  If all your loops are of do/enddo
 type only in, say, .f90 files, then you should set a buffer flag with an
 autocommand such as >
 
@@ -485,7 +485,21 @@ to get do loops indented in .f90 files and left alone in Fortran files with
 other extensions such as .for.
 
 
-VERILOG							*verilog-indent*
+PYTHON							*ft-python-indent*
+
+The amount of indent can be set for the following situations.  The examples
+given are de the defaults.  Note that the variables are set to an expression,
+so that you can change the value of 'shiftwidth' later.
+
+Indent after an open paren: >
+	let g:pyindent_open_paren = '&sw * 2'
+Indent after a nested paren: >
+	let g:pyindent_nested_paren = '&sw'
+Indent for a continuation line: >
+	let g:pyindent_continue = '&sw * 2'
+
+
+VERILOG							*ft-verilog-indent*
 
 General block statements such as if, for, case, always, initial, function,
 specify and begin, etc., are indented.  The module block statements (first
@@ -520,7 +534,7 @@ In addition, you can turn the verbose mode for debug issue: >
 Make sure to do ":set cmdheight=2" first to allow the display of the message.
 
 
-VIM							*vim-indent*
+VIM							*ft-vim-indent*
 
 For indenting Vim scripts there is one variable that specifies the amount of
 indent for a continuation line, a line that starts with a backslash: >

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.0aa.  Last change: 2004 Dec 29
+*index.txt*     For Vim version 7.0aa.  Last change: 2006 Feb 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -150,12 +150,15 @@ commands in CTRL-X submode				*i_CTRL-X_index*
 |i_CTRL-X_CTRL-K|	CTRL-X CTRL-K	complete identifiers from dictionary
 |i_CTRL-X_CTRL-L|	CTRL-X CTRL-L	complete whole lines
 |i_CTRL-X_CTRL-N|	CTRL-X CTRL-N	next completion
+|i_CTRL-X_CTRL-O|	CTRL-X CTRL-O	omni completion
 |i_CTRL-X_CTRL-P|	CTRL-X CTRL-P	previous completion
+|i_CTRL-X_CTRL-S|	CTRL-X CTRL-S	spelling suggestions
 |i_CTRL-X_CTRL-T|	CTRL-X CTRL-T	complete identifiers from thesaurus
 |i_CTRL-X_CTRL-Y|	CTRL-X CTRL-Y	scroll down
 |i_CTRL-X_CTRL-U|	CTRL-X CTRL-U	complete with 'completefunc'
 |i_CTRL-X_CTRL-V|	CTRL-X CTRL-V	complete like in : command line
 |i_CTRL-X_CTRL-]|	CTRL-X CTRL-]	complete tags
+|i_CTRL-X_s|		CTRL-X s	spelling suggestions
 {not available when compiled without the +insert_expand feature}
 
 ==============================================================================
@@ -340,9 +343,9 @@ tag		char	      note action in Normal mode	~
 				   "yy"
 |ZZ|		ZZ		   store current file if modified, and exit
 |ZQ|		ZQ		   exit current file always
-|[|		[{char}		   square bracket command (see below)
+|[|		[{char}		   square bracket command (see |[| below)
 		\		   not used
-|]|		]{char}		   square bracket command (see below)
+|]|		]{char}		   square bracket command (see |]| below)
 |^|		^		1  cursor to the first CHAR of the line
 |_|		_		1  cursor to the first CHAR N - 1 lines lower
 |`|		`{a-zA-Z0-9}	1  cursor to the mark {a-zA-Z0-9}
@@ -370,7 +373,7 @@ tag		char	      note action in Normal mode	~
 |e|		e		1  cursor forward to the end of word N
 |f|		f{char}		1  cursor to Nth occurrence of {char} to the
 				   right
-|g|		g{char}		   extended commands, see below
+|g|		g{char}		   extended commands, see |g| below
 |h|		h		1  cursor N chars to the left
 |i|		i		2  insert text before the cursor N times
 |j|		j		1  cursor N lines downward
@@ -400,7 +403,7 @@ tag		char	      note action in Normal mode	~
 				   cursor [into buffer x]
 |y|		["x]y{motion}	   yank Nmove text [into buffer x]
 |yy|		["x]yy		   yank N lines [into buffer x]
-|z|		z{char}		   commands starting with 'z', see below
+|z|		z{char}		   commands starting with 'z', see |z| below
 |{|		{		1  cursor N paragraphs backward
 |bar|		|		1  cursor to column N
 |}|		}		1  cursor N paragraphs forward
@@ -538,6 +541,9 @@ tag		command		   action in Normal mode	~
 				   the cursor
 |CTRL-W_f|	CTRL-W f	   split window and edit file name under the
 				   cursor
+|CTRL-W_F|	CTRL-W F	   split window and edit file name under the
+				   cursor and jump to the line number
+				   following the file name.
 |CTRL-W_g_CTRL-]| CTRL-W g CTRL-]  split window and do |:tjump| to tag under
 				   cursor
 |CTRL-W_g]|	CTRL-W g ]	   split window and do |:tselect| for tag
@@ -684,6 +690,7 @@ tag		char	      note action in Normal mode	~
 				   of the current screen line
 |g8|		g8		   print hex value of bytes used in UTF-8
 				   character under the cursor
+|g<|		g<		   display previous command output
 |g?|		g?		2  Rot13 encoding operator
 |g?g?|		g??		2  Rot13 encode current line
 |g?g?|		g?g?		2  Rot13 encode current line
@@ -715,6 +722,9 @@ tag		char	      note action in Normal mode	~
 				   word
 |gf|		gf		   start editing the file whose name is under
 				   the cursor
+|gF|		gF		   start editing the file whose name is under
+				   the cursor and jump to the line number
+				   following the filename.
 |gg|		gg		1  cursor to line N, default first line
 |gh|		gh		   start Select mode
 |gi|		gi		2  like "i", but first move to the |'^| mark
@@ -732,6 +742,7 @@ tag		char	      note action in Normal mode	~
 |gu|		gu{motion}	2  make Nmove text lowercase
 |gv|		gv		   reselect the previous Visual area
 |gw|		gw{motion}	2  format Nmove text and keep cursor
+|g@|            g@{motion}         call 'operatorfunc'
 |g~|		g~{motion}	2  swap case for Nmove text
 |g<Down>|	g<Down>		1  same as "gj"
 |g<End>|	g<End>		1  same as "g$"
@@ -755,16 +766,19 @@ tag		char	      note action in Normal mode	~
 				   cursor on first non-blank
 |z.|		z.		   redraw, cursor line to center of window,
 				   cursor on first non-blank
+|z=|		z=		   give spelling suggestions
 |zA|		zA		   open a closed fold or close an open fold
 				   recursively
 |zC|		zC		   close folds recursively
 |zD|		zD		   delete folds recursively
 |zE|		zE		   eliminate all folds
 |zF|		zF		   create a fold for N lines
+|zG|		zG		   mark word as good spelled word
 |zM|		zM		   set 'foldlevel' to zero
 |zN|		zN		   set 'foldenable'
 |zO|		zO		   open folds recursively
 |zR|		zR		   set 'foldlevel' to the deepest fold
+|zW|		zW		   mark word as wrong (bad) spelled word
 |zX|		zX		   re-apply 'foldlevel'
 |z^|		z^		   cursor on line N (default line above
 				   window), otherwise like "z-"
@@ -776,6 +790,7 @@ tag		char	      note action in Normal mode	~
 				   position the cursor at the end (right side)
 				   of the screen
 |zf|		zf{motion}	   create a fold for Nmove text
+|zg|		zg		   mark word as good spelled word
 |zh|		zh		   when 'wrap' off scroll screen N characters
 				   to the right
 |zi|		zi		   toggle 'foldenable'
@@ -792,6 +807,7 @@ tag		char	      note action in Normal mode	~
 				   side) of the screen
 |zt|		zt		   redraw, cursor line at top of window
 |zv|		zv		   open enough folds to view the cursor line
+|zw|		zw		   mark word as wrong (bad) spelled word
 |zx|		zx		   re-apply 'foldlevel' and do "zv"
 |zz|		zz		   redraw, cursor line at center of window
 |z<Left>|	z<Left>		   same as "zh"
@@ -800,7 +816,7 @@ tag		char	      note action in Normal mode	~
 ==============================================================================
 3. Visual mode						*visual-index*
 
-Most commands in Visual mode are the same as in Normal mode. The ones listed
+Most commands in Visual mode are the same as in Normal mode.  The ones listed
 here are those that are different.
 
 tag		command	      note action in Visual mode	~
@@ -1059,6 +1075,9 @@ The commands are sorted on the non-optional part of their name.
 |:cNfile|	:cNf[ile]	go to last error in previous file
 |:cabbrev|	:ca[bbrev]	like ":abbreviate" but for Command-line mode
 |:cabclear|	:cabc[lear]	clear all abbreviations for Command-line mode
+|:caddbuffer|	:caddb[uffer]	add errors from buffer
+|:caddexpr|	:cad[dexpr]	add errors from expr
+|:caddfile|	:caddf[ile]	add error message to current quickfix list
 |:call|		:cal[l]		call a function
 |:catch|	:cat[ch]	part of a :try command
 |:cbuffer|	:cb[uffer]	parse error messages and jump to first error
@@ -1066,6 +1085,7 @@ The commands are sorted on the non-optional part of their name.
 |:cclose|	:ccl[ose]	close quickfix window
 |:cd|		:cd		change directory
 |:center|	:ce[nter]	format lines at the center
+|:cexpr|	:cex[pr]	read errors from expr and jump to first
 |:cfile|	:cf[ile]	read file with error messages and jump to first
 |:cfirst|	:cfir[st]	go to the specified error, default first one
 |:cgetfile|	:cg[etfile]	read file with error messages
@@ -1137,6 +1157,7 @@ The commands are sorted on the non-optional part of their name.
 |:elseif|	:elsei[f]	part of an :if command
 |:emenu|	:em[enu]	execute a menu by name
 |:endif|	:en[dif]	end previous :if
+|:endfor|	:endfo[r]	end previous :for
 |:endfunction|	:endf[unction]	end of a user function
 |:endtry|	:endt[ry]	end previous :try
 |:endwhile|	:endw[hile]	end previous :while
@@ -1158,11 +1179,12 @@ The commands are sorted on the non-optional part of their name.
 |:folddoopen|	:foldd[oopen]	execute command on lines not in a closed fold
 |:folddoclosed|	:folddoc[losed]	execute command on lines in a closed fold
 |:foldopen|	:foldo[pen]	open folds
+|:for|		:for		for loop
 |:function|	:fu[nction]	define a user function
 |:global|	:g[lobal]	execute commands for matching lines
 |:goto|		:go[to]		go to byte in the buffer
 |:grep|		:gr[ep]		run 'grepprg' and jump to first match
-|:grepadd|	:grepa[dd]	like grep, but append to current list
+|:grepadd|	:grepa[dd]	like :grep, but append to current list
 |:gui|		:gu[i]		start the GUI
 |:gvim|		:gv[im]		start the GUI
 |:hardcopy|	:ha[rdcopy]	send text to the printer
@@ -1195,24 +1217,59 @@ The commands are sorted on the non-optional part of their name.
 |:join|		:j[oin]		join lines
 |:jumps|	:ju[mps]	print the jump list
 |:k|		:k		set a mark
+|:keepalt|	:keepa[lt]	following command keeps the alternate file
 |:keepmarks|	:kee[pmarks]	following command keeps marks where they are
 |:keepjumps|	:keepj[jumps]	following command keeps jumplist and marks
+|:lNext|	:lN[ext]	go to previous entry in location list
+|:lNfile|	:lNf[ile]	go to last entry in previous file
 |:list|		:l[ist]		print lines
+|:laddexpr|	:lad[dexpr]	add locations from expr
+|:laddbuffer|	:laddb[uffer]	add locations from buffer
+|:laddfile|	:laddf[ile]	add locations to current location list
 |:last|		:la[st]		go to the last file in the argument list
 |:language|	:lan[guage]	set the language (locale)
+|:lbuffer|	:lb[uffer]	parse locations and jump to first location
 |:lcd|		:lc[d]		change directory locally
 |:lchdir|	:lch[dir]	change directory locally
+|:lclose|	:lcl[ose]	close location window
+|:lcscope|	:lcs[cope]      like ":cscope" but uses location list
 |:left|		:le[ft]		left align lines
 |:leftabove|	:lefta[bove]	make split window appear left or above
 |:let|		:let		assign a value to a variable or option
+|:lexpr|	:lex[pr]	read locations from expr and jump to first
+|:lfile|	:lf[ile]	read file with locations and jump to first
+|:lfirst|	:lfir[st]	go to the specified location, default first one
+|:lgetfile|	:lg[etfile]	read file with locations
+|:lgrep|	:lgr[ep]	run 'grepprg' and jump to first match
+|:lgrepadd|	:lgrepa[dd]	like :grep, but append to current list
+|:lhelpgrep|	:lh[elpgrep]	like ":helpgrep" but uses location list
+|:ll|		:ll		go to specific location
+|:llast|	:lla[st]	go to the specified location, default last one
+|:llist|	:lli[st]	list all locations
+|:lmake|	:lmak[e]	execute external command 'makeprg' and parse
+				error messages
 |:lmap|		:lm[ap]		like ":map!" but includes Lang-Arg mode
 |:lmapclear|	:lmapc[lear]	like ":mapclear!" but includes Lang-Arg mode
+|:lnext|	:lne[xt]	go to next location
+|:lnewer|	:lnew[er]	go to newer location list
+|:lnfile|	:lnf[ile]	go to first location in next file
 |:lnoremap|	:ln[oremap]	like ":noremap!" but includes Lang-Arg mode
 |:loadkeymap|	:loadk[eymap]	load the following keymaps until EOF
 |:loadview|	:lo[adview]	load view for current window from a file
 |:lockmarks|	:loc[kmarks]	following command keeps marks where they are
+|:lockvar|	:lockv[ar]	lock variables
+|:lolder|	:lol[der]	go to older location list
+|:lopen|	:lope[n]	open location window
+|:lprevious|	:lp[revious]	go to previous location
+|:lpfile|	:lpf[ile]	go to last location in previous file
+|:lrewind|	:lr[ewind]	go to the specified location, default first one
 |:ls|		:ls		list all buffers
+|:ltag|		:lt[ag]		jump to tag and add matching tags to the
+				location list
 |:lunmap|	:lu[nmap]	like ":unmap!" but includes Lang-Arg mode
+|:lvimgrep|	:lv[imgrep]	search for pattern in files
+|:lvimgrepadd|	:lvimgrepa[dd]	like :vimgrep, but append to current list
+|:lwindow|	:lw[indow]	open or close location window
 |:move|		:m[ove]		move lines
 |:mark|		:ma[rk]		set a mark
 |:make|		:mak[e]		execute external command 'makeprg' and parse
@@ -1226,11 +1283,13 @@ The commands are sorted on the non-optional part of their name.
 |:messages|	:mes[sages]	view previously displayed messages
 |:mkexrc|	:mk[exrc]	write current mappings and settings to a file
 |:mksession|	:mks[ession]	write session info to a file
+|:mkspell|	:mksp[ell]	produce .spl spell file
 |:mkvimrc|	:mkv[imrc]	write current mappings and settings to a file
 |:mkview|	:mkvie[w]	write view of current window to a file
 |:mode|		:mod[e]		show or change the screen mode
 |:mzscheme|	:mz[scheme]	execute MzScheme command
 |:mzfile|	:mzf[ile]	execute MzScheme script file
+|:nbkey|	:nb[key]	pass a key to Netbeans
 |:next|		:n[ext]		go to next file in the argument list
 |:new|		:new		create a new empty window
 |:nmap|		:nm[ap]		like ":map" but for Normal mode
@@ -1238,6 +1297,7 @@ The commands are sorted on the non-optional part of their name.
 |:nmenu|	:nme[nu]	add menu for Normal mode
 |:nnoremap|	:nn[oremap]	like ":noremap" but for Normal mode
 |:nnoremenu|	:nnoreme[nu]	like ":noremenu" but for Normal mode
+|:noautocmd|	:noa[utocmd]	following command don't trigger autocommands
 |:noremap|	:no[remap]	enter a mapping that will not be remapped
 |:nohlsearch|	:noh[lsearch]	suspend 'hlsearch' highlighting
 |:noreabbrev|	:norea[bbrev]	enter an abbreviation that will not be
@@ -1251,16 +1311,20 @@ The commands are sorted on the non-optional part of their name.
 |:omap|		:om[ap]		like ":map" but for Operator-pending mode
 |:omapclear|	:omapc[lear]	remove all mappings for Operator-pending mode
 |:omenu|	:ome[nu]	add menu for Operator-pending mode
-|:only|		:on[ly]		close all windows except current one
+|:only|		:on[ly]		close all windows except the current one
 |:onoremap|	:ono[remap]	like ":noremap" but for Operator-pending mode
 |:onoremenu|	:onoreme[nu]	like ":noremenu" but for Operator-pending mode
 |:options|	:opt[ions]	open the options-window
 |:ounmap|	:ou[nmap]	like ":unmap" but for Operator-pending mode
 |:ounmenu|	:ounme[nu]	remove menu for Operator-pending mode
-|:print|	:p[rint]	print lines
 |:pclose|	:pc[lose]	close preview window
 |:pedit|	:ped[it]	edit file in the preview window
 |:perl|		:pe[rl]		execute Perl command
+|:print|	:p[rint]	print lines
+|:profdel|	:profd[el]	stop profiling a function or script
+|:profile|	:prof[ile]	profiling functions and scripts
+|:promptfind|	:pro[mtfind]	open GUI dialog for searching
+|:promptrepl| 	:promtr[epl]	open GUI dialog for search/replace
 |:perldo|	:perld[o]	execute Perl command for each line
 |:pop|		:po[p]		jump to older entry in tag stack
 |:popup|	:pop[up]	popup a menu by name
@@ -1307,6 +1371,7 @@ The commands are sorted on the non-optional part of their name.
 |:substitute|	:s[ubstitute]	find and replace text
 |:sNext|	:sN[ext]	split window and go to previous file in
 				argument list
+|:sandbox|	:san[dbox]	execute a command in the sandbox
 |:sargument|	:sa[rgument]	split window and go to specific file in
 				argument list
 |:sall|		:sal[l]		open a window for each file in argument list
@@ -1330,7 +1395,7 @@ The commands are sorted on the non-optional part of their name.
 				buffer list
 |:scriptnames|	:scrip[tnames]	list names of all sourced Vim scripts
 |:scriptencoding| :scripte[ncoding]	encoding used in sourced Vim script
-|:scscope|	:scs[cope]      split window and execute cscope command
+|:scscope|	:scs[cope]	split window and execute cscope command
 |:set|		:se[t]		show or set options
 |:setfiletype|	:setf[iletype]	set 'filetype', unless it was set already
 |:setglobal|	:setg[lobal]	show global values of options
@@ -1350,7 +1415,12 @@ The commands are sorted on the non-optional part of their name.
 				argument list
 |:sniff|	:sni[ff]	send request to sniff
 |:snomagic|	:sno[magic]	:substitute with 'nomagic'
+|:sort|		:sor[t]		sort lines
 |:source|	:so[urce]	read Vim or Ex commands from a file
+|:spelldump|	:spelld[ump]	split window and fill with all correct words
+|:spellgood|	:spe[llgood]	add good word for spelling
+|:spellrepall|	:spellr[epall]	replace all bad words like last |z=|
+|:spellwrong|	:spellw[rong]	add spelling mistake
 |:split|	:sp[lit]	split current window
 |:sprevious|	:spr[evious]	split window and go to previous file in the
 				argument list
@@ -1359,6 +1429,7 @@ The commands are sorted on the non-optional part of their name.
 |:stop|		:st[op]		suspend the editor or escape to a shell
 |:stag|		:sta[g]		split window and jump to a tag
 |:startinsert|	:star[tinsert]	start Insert mode
+|:startgreplace| :startg[replace] start Virtual Replace mode
 |:startreplace|	:startr[eplace]	start Replace mode
 |:stopinsert||	:stopi[nsert]	stop Insert mode
 |:stjump|	:stj[ump]	do ":tjump" and split window
@@ -1371,6 +1442,20 @@ The commands are sorted on the non-optional part of their name.
 |:syncbind|	:sync[bind]	sync scroll binding
 |:t|		:t		same as ":copy"
 |:tNext|	:tN[ext]	jump to previous matching tag
+|:tabNext|	:tabN[ext]	go to previous tab page
+|:tabclose|	:tabc[lose]	close current tab page
+|:tabedit|	:tabe[dit]	edit a file in a new tab page
+|:tabfind|	:tabf[ind]	find file in 'path', edit it in a new tab page
+|:tabfirst|	:tabfir[st]	got to first tab page
+|:tablast|	:tabl[ast]	got to last tab page
+|:tabmove|	:tabm[ove]	move tab page to other position
+|:tabnew|	:tabnew		edit a file in a new tab page
+|:tabnext|	:tabn[ext]	go to next tab page
+|:tabonly|	:tabo[nly]	close all tab pages except the current one
+|:tabprevious|	:tabp[revious]	go to previous tab page
+|:tabrewind|	:tabr[ewind]	got to first tab page
+|:tabs|		:tabs		list the tab pages and what they contain
+|:tab|		:tab		create new tab when opening new window
 |:tag|		:ta[g]		jump to tag
 |:tags|		:tags		show the contents of the tag stack
 |:tcl|		:tc[l]		execute Tcl command
@@ -1391,10 +1476,12 @@ The commands are sorted on the non-optional part of their name.
 |:tselect|	:ts[elect]	list matching tags and select one
 |:tunmenu|	:tu[nmenu]	remove menu tooltip
 |:undo|		:u[ndo]		undo last change(s)
+|:undojoin|	:undoj[oin]	join next change with previous undo block
 |:unabbreviate|	:una[bbreviate]	remove abbreviation
 |:unhide|	:unh[ide]	open a window for each loaded file in the
 				buffer list
 |:unlet|	:unl[et]	delete variable
+|:unlockvar|	:unlo[ckvar]	unlock variables
 |:unmap|	:unm[ap]	remove mapping
 |:unmenu|	:unme[nu]	remove menu
 |:update|	:up[date]	write buffer if modified
@@ -1402,6 +1489,8 @@ The commands are sorted on the non-optional part of their name.
 |:version|	:ve[rsion]	print version number and other info
 |:verbose|	:verb[ose]	execute command with 'verbose' set
 |:vertical|	:vert[ical]	make following command split vertically
+|:vimgrep|	:vim[grep]	search for pattern in files
+|:vimgrepadd|	:vimgrepa[dd]	like :vimgrep, but append to current list
 |:visual|	:vi[sual]	same as ":edit", but turns off "Ex" mode
 |:viusage|	:viu[sage]	overview of Normal mode commands
 |:view|		:vie[w]		edit a file read-only

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.0aa.  Last change: 2005 Jan 26
+*insert.txt*    For Vim version 7.0aa.  Last change: 2006 Mar 02
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -126,8 +126,10 @@ CTRL-R {0-9a-z"%#*+:.-=}					*i_CTRL-R*
 			'='	the expression register: you are prompted to
 				enter an expression (see |expression|)
 				Note that 0x80 (128 decimal) is used for
-				special keys, use CTRL-R CTRL-R to insert it
-				literally.
+				special keys.  E.g., you can use this to move
+				the cursor up:
+					CTRL-R ="\<Up>"
+				Use CTRL-R CTRL-R to insert text literally.
 		See |registers| about registers.  {not in Vi}
 
 CTRL-R CTRL-R {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-R*
@@ -190,7 +192,7 @@ CTRL-Q		Same as CTRL-V.
 		work then.  It does work in the GUI.
 
 CTRL-X		Enter CTRL-X mode.  This is a sub-mode where commands can
-		be given to complete words or scroll the window. See
+		be given to complete words or scroll the window.  See
 		|i_CTRL-X| and |ins-completion|. {not in Vi}
 
 						*i_CTRL-E*
@@ -271,7 +273,7 @@ entered directly.  This way you can enter any character, except a line break
 
 first char	mode	     max nr of chars   max value ~
 (none)		decimal		   3		255
-o or O		octal		   3		255
+o or O		octal		   3		377	 (255)
 x or X		hexadecimal	   2		ff	 (255)
 u		hexadecimal	   4		ffff	 (65535)
 U		hexadecimal	   8		7fffffff (2147483647)
@@ -354,6 +356,8 @@ CTRL-G CTRL-J	cursor one line down, insert start column    *i_CTRL-G_CTRL-J*
 <MouseUp>	scroll three lines up			     *i_<MouseUp>*
 <S-MouseUp>	scroll a full page up			     *i_<S-MouseUp>*
 CTRL-O		execute one command, return to Insert mode   *i_CTRL-O*
+CTRL-\ CTRL-O	like CTRL-O but don't move the cursor	     *i_CTRL-\_CTRL-O*
+CTRL-L		when 'insertmode' is set: go to Normal mode  *i_CTRL-L*
 CTRL-G u	break undo sequence, start new change	     *i_CTRL-G_u*
 -----------------------------------------------------------------------
 
@@ -363,7 +367,8 @@ option.
 The CTRL-O command sometimes has a side effect: If the cursor was beyond the
 end of the line, it will be put on the last character in the line.  In
 mappings it's often better to use <Esc> (first put an "x" in the text, <Esc>
-will then always put the cursor on it).
+will then always put the cursor on it).  Or use CTRL-\ CTRL-O, but then
+beware of the cursor possibly being beyond the end of the line.
 
 The shifted cursor keys are not available on all terminals.
 
@@ -392,7 +397,7 @@ The CTRL-G j and CTRL-G k commands can be used to insert text in front of a
 column.  Example: >
    int i;
    int j;
-Position the cursor on the first "int", type "istatic<C-G>j       ".  The
+Position the cursor on the first "int", type "istatic <C-G>j       ".  The
 result is: >
    static int i;
 	  int j;
@@ -419,7 +424,7 @@ When 'textwidth' and 'wrapmargin' are both set, 'textwidth' is used.
 If you don't really want to break the line, but view the line wrapped at a
 convenient place, see the 'linebreak' option.
 
-The line is only broken automatically when using insert mode, or when
+The line is only broken automatically when using Insert mode, or when
 appending to a line.  When in replace mode and the line length is not
 changed, the line will not be broken.
 
@@ -435,6 +440,10 @@ characters to the 'formatoptions' option:
      current insert command.  Only differs from "l" when entering non-white
      characters while crossing the 'textwidth' boundary.
 
+Normally an internal function will be used to decide where to break the line.
+If you want to do it in a different way set the 'formatexpr' option to an
+expression that will take care of the line break.
+
 If you want to format a block of text, you can use the "gq" operator.  Type
 "gq" and a movement command to move the cursor to the end of the block.  In
 many cases, the command "gq}" will do what you want (format until the end of
@@ -547,7 +556,7 @@ entering new data while keeping all the columns aligned.
 ==============================================================================
 7. Insert mode completion				*ins-completion*
 
-In Insert and Replace modes, there are several commands to complete part of a
+In Insert and Replace mode, there are several commands to complete part of a
 keyword or line that has been typed.  This is useful if you are using
 complicated keywords (e.g., function names with capitals and underscores).
 
@@ -565,7 +574,10 @@ Completion can be done for:
 7. file names						|i_CTRL-X_CTRL-F|
 8. definitions or macros				|i_CTRL-X_CTRL-D|
 9. Vim command-line					|i_CTRL-X_CTRL-V|
-10. keywords in 'complete'				|i_CTRL-N|
+10. User defined completion				|i_CTRL-X_CTRL-U|
+11. omni completion					|i_CTRL-X_CTRL-O|
+12. Spelling suggestions				|i_CTRL-X_s|
+13. keywords in 'complete'				|i_CTRL-N|
 
 All these (except 2) are done in CTRL-X mode.  This is a sub-mode of Insert
 and Replace modes.  You enter CTRL-X mode by typing CTRL-X and one of the
@@ -612,11 +624,11 @@ Completing whole lines					*compl-whole-line*
 
 							*i_CTRL-X_CTRL-L*
 CTRL-X CTRL-L		Search backwards for a line that starts with the
-			same characters as in the current line before the
-			cursor.  Indent is ignored.  The found line is
+			same characters as those in the current line before
+			the cursor.  Indent is ignored.  The matching line is
 			inserted in front of the cursor.
-			The 'complete' option is used to decide in which
-			buffers a match is searched for.  But only loaded
+			The 'complete' option is used to decide which buffers
+			are searched for a match.  Both loaded and unloaded
 			buffers are used.
 	CTRL-L	or
 	CTRL-P		Search backwards for next matching line.  This line
@@ -668,6 +680,9 @@ at least two characters is matched.
 	just type:
 	    printf("(%g, %g, %g)", vector[0], ^P[1], ^P[2]);
 
+The search wraps around the end of the file, the value of 'wrapscan' is not
+used here.
+
 Multiple repeats of the same completion are skipped; thus a different match
 will be inserted at each CTRL-N and CTRL-P (unless there is only one
 matching keyword).
@@ -726,7 +741,7 @@ CTRL-X CTRL-K		Search the files given with the 'dictionary' option
 			keyword replaces the previous matching keyword.
 
 							*i_CTRL-X_CTRL-T*
-CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way. It uses
+CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			the 'thesaurus' option instead of 'dictionary'.  If a
 			match is found in the thesaurus file, all the
 			remaining words on the same line are included as
@@ -839,7 +854,8 @@ CTRL-X CTRL-D		Search in the current and included files for the
 Completing Vim commands					*compl-vim*
 
 Completion is context-sensitive.  It works like on the Command-line.  It
-completes an Ex command as well as its arguments.
+completes an Ex command as well as its arguments.  This is useful when writing
+a Vim script.
 
 							*i_CTRL-X_CTRL-V*
 CTRL-X CTRL-V		Guess what kind of item is in front of the cursor and
@@ -858,11 +874,11 @@ CTRL-X CTRL-V		Guess what kind of item is in front of the cursor and
 			completion, for example: >
 				:imap <Tab> <C-X><C-V>
 
-User defined completing					*compl-function*
+User defined completion					*compl-function*
 
 Completion is done by a function that can be defined by the user with the
-'completefunc' option.  See the option for how the function is called and an
-example.
+'completefunc' option.  See below for how the function is called and an
+example |complete-functions|.
 
 							*i_CTRL-X_CTRL-U*
 CTRL-X CTRL-U		Guess what kind of item is in front of the cursor and
@@ -875,6 +891,47 @@ CTRL-X CTRL-U		Guess what kind of item is in front of the cursor and
 			previous one.
 
 
+Omni completion						*compl-omni*
+
+Completion is done by a function that can be defined by the user with the
+'omnifunc' option.  This is to be used for filetype-specific completion.
+
+See below for how the function is called and an example |complete-functions|.
+For remarks about specific filetypes see |compl-omni-filetypes|.
+
+							*i_CTRL-X_CTRL-O*
+CTRL-X CTRL-O		Guess what kind of item is in front of the cursor and
+			find the first match for it.
+	CTRL-O	or
+	CTRL-N		Use the next match.  This match replaces the previous
+			one.
+
+	CTRL-P		Use the previous match.  This match replaces the
+			previous one.
+
+
+Spelling suggestions					*compl-spelling*
+
+A word before or at the cursor is located and correctly spelled words are
+suggested to replace it.  If there is a badly spelled word in the line, before
+or under the cursor, the cursor is moved to after it.  Otherwise the word just
+before the cursor is used for suggestions, even though it isn't badly spelled.
+
+NOTE: CTRL-S suspends display in many Unix terminals.  Use 's' instead.  Type
+CTRL-Q to resume displaying.
+
+						*i_CTRL-X_CTRL-S* *i_CTRL-X_s*
+CTRL-X CTRL-S   or
+CTRL-X s		Locate the word in front of the cursor and find the
+			first spell suggestion for it.
+	CTRL-S	or
+	CTRL-N		Use the next suggestion.  This replaces the previous
+			one.  Note that you can't use 's' here.
+
+	CTRL-P		Use the previous suggestion.  This replaces the
+			previous one.
+
+
 Completing keywords from different sources		*compl-generic*
 
 							*i_CTRL-N*
@@ -900,6 +957,464 @@ CTRL-P			Find previous match for words that start with the
 			copy the words following the previous expansion in
 			other contexts unless a double CTRL-X is used.
 
+
+FUNCTIONS FOR FINDING COMPLETIONS			*complete-functions*
+
+This applies to 'completefunc' and 'omnifunc'.
+
+The function is called in two different ways:
+- First the function is called to find the start of the text to be completed.
+- Later the function is called to actually find the matches.
+
+On the first invocation the arguments are:
+   a:findstart  1
+   a:base	empty
+
+The function must return the column where the completion starts.  It must be a
+number between zero and the cursor column "col('.')".  This involves looking
+at the characters just before the cursor and including those characters that
+could be part of the completed item.  The text between this column and the
+cursor column will be replaced with the matches.  Return -1 if no completion
+can be done.
+
+On the second invocation the arguments are:
+   a:findstart  0
+   a:base	the text with which matches should match; the text that was
+		located in the first call (can be empty)
+
+The function must return a List with the matching words.  These matches
+usually include the "a:base" text.  When there are no matches return an empty
+List.
+
+Each list item can either be a string or a Dictionary.  When it is a string it
+is used as the completion.  When it is a Dictionary it can contain these
+items:
+	word		the completion, mandatory
+	menu		extra text for the popup menu
+	info		more information about the item
+	kind		single letter indicating the type of completion
+	icase		when not zero case is to be ignored; when omitted
+			the 'ignorecase' option is used
+
+All of these except 'icase' must be a string.  If an item does not meet these
+requirements then an error message is given and further items in the list are
+not used.  You can mix string and Dictionary items in the returned list.
+
+The "menu" item is used in the popup menu and may be truncated, thus it should
+be relatively short.  The "info" item can be longer, it may be displayed in a
+balloon.
+
+The "kind" item uses a single letter to indicate the kind of completion.  This
+may be used to show the completion differently (different color or icon).
+Currently these types can be used:
+	v	variable
+	f	function or method
+	c	composite (struct, object)
+
+When searching for matches takes some time call |complete_add()| to add each
+match to the total list.  These matches should then not appear in the returned
+list!  Call |complete_check()| now and then to allow the user to press a key
+while still searching for matches.  Stop searching when it returns non-zero.
+
+The function is allowed to move the cursor, it is restored afterwards.  This
+option cannot be set from a |modeline| or in the |sandbox|, for security
+reasons.
+
+An example that completes the names of the months: >
+	fun! CompleteMonths(findstart, base)
+	  if a:findstart
+	    " locate the start of the word
+	    let line = getline('.')
+	    let start = col('.') - 1
+	    while start > 0 && line[start - 1] =~ '\a'
+	      let start -= 1
+	    endwhile
+	    return start
+	  else
+	    " find months matching with "a:base"
+	    let res = []
+	    for m in split("Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec")
+	      if m =~ '^' . a:base
+		call add(res, m)
+	      endif
+	    endfor
+	    return res
+	  endif
+	endfun
+	set completefunc=CompleteMonths
+<
+The same, but now pretending searching for matches is slow: >
+	fun! CompleteMonths(findstart, base)
+	  if a:findstart
+	    " locate the start of the word
+	    let line = getline('.')
+	    let start = col('.') - 1
+	    while start > 0 && line[start - 1] =~ '\a'
+	      let start -= 1
+	    endwhile
+	    return start
+	  else
+	    " find months matching with "a:base"
+	    for m in split("Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec")
+	      if m =~ '^' . a:base
+		call complete_add(m)
+	      endif
+	      sleep 300m	" simulate searching for next match
+	      if complete_check()
+		break
+	      endif
+	    endfor
+	    return []
+	  endif
+	endfun
+	set completefunc=CompleteMonths
+<
+
+INSERT COMPLETION POPUP MENU				*ins-completion-menu*
+							*popupmenu-completion*
+Vim can display the matches in a simplistic popup menu.
+
+The menu is used when:
+- The 'completeopt' option contains "menu".
+- The terminal supports at least 8 colors.
+- There are at least two matches.
+
+There are two states:
+1. A complete match has been inserted.
+2. Only part of a match has been inserted.
+
+You normally start in the first state, with the first match being inserted.
+When "longest" is in 'completeopt' and there is more than one match you start
+in the second state.
+
+If you select another match, e.g., with CTRL-N or CTRL-P, you go from the
+second to the first state.  This doesn't change the list of matches.
+
+
+In the first state these keys have a special meaning:
+<BS> and CTRL-H   Delete one character, find the matches for the word before
+		  the cursor.  This reduces the list of matches, often to one
+		  entry, and switches to the second state.
+
+In the second state these keys have a special meaning:
+<BS> and CTRL-H   Delete one character, find the matches for the shorter word
+		  before the cursor.  This may find more matches.
+CTRL-L		  Add one character from the current match, may reduce the
+		  number of matches.
+any printable, non-white character:
+		  Add this character and reduce the number of matches.
+
+In both states these can be used:
+<CR> and <Enter>  Accept the currently selected match and stop completion.
+<PageUp>	  Select a match several entries back, but don't insert it.
+<PageDown>	  Select a match several entries further, but don't insert it.
+<Up>		  Select the previous match, as if CTRL-P was used, but don't
+		  insert it.
+<Down>		  Select the next match, as if CTRL-N was used, but don't
+		  insert it.
+Any other character:
+		  Stop completion without changing the match and insert the
+		  typed character.  Note that typing a space or <Tab> will
+		  work in both states.
+
+
+The colors of the menu can be changed with these highlight groups:
+Pmenu		normal item  |hl-Pmenu|
+PmenuSel	selected item  |hl-PmenuSel|
+PmenuSbar	scrollbar  |hl-PmenuSbar|
+PmenuThumb	thumb of the scrollbar  |hl-PmenuThumb|
+
+There are no special mappings for when the popup menu is visible.  However,
+you can use an Insert mode mapping that checks the |pumvisible()| function to
+do something different.  Example: >
+	:inoremap <Down> <C-R>=pumvisible() ? "\<lt>C-N>" : "\<lt>Down>"<CR>
+
+
+FILETYPE-SPECIFIC REMARKS FOR OMNI COMPLETION	    *compl-omni-filetypes*
+
+The file used for {filetype} should be autoload/{filetype}complete.vim
+in 'runtimepath'.  Thus for "java" it is autoload/javacomplete.vim.
+
+
+C							*ft-c-omni*
+
+Completion of C code requires a tags file.  You should use Exuberant ctags,
+because it adds extra information that is needed for completion.  You can find
+it here: http://ctags.sourceforge.net/
+For version 5.5.4 you should add a patch that adds the "typename:" field:
+ftp://ftp.vim.org/pub/vim/unstable/patches/ctags-5.5.4.patch
+A compiled .exe for MS-Windows can be found at:
+http://georgevreilly.com/vim/ctags.html
+
+If you want to complete system functions you can do something like this.  Use
+ctags to generate a tags file for all the system header files: >
+	% ctags -R -f ~/.vim/systags /usr/include /usr/local/include
+In your vimrc file add this tags file to the 'tags' option: >
+	set tags+=~/.vim/systags
+
+When using CTRL-X CTRL-O after a name without any "." or "->" it is completed
+from the tags file directly.  This works for any identifier, also function
+names.  If you want to complete a local variable name, which does not appear
+in the tags file, use CTRL-P instead.
+
+When using CTRL-X CTRL-O after something that has "." or "->" Vim will attempt
+to recognize the type of the variable and figure out what members it has.
+This means only members valid for the variable will be listed.
+
+When a member name already was complete, CTRL-X CTRL-O will add a "." or
+"->" for composite types.
+
+Vim doesn't include a C compiler, only the most obviously formatted
+declarations are recognized.  Preprocessor stuff may cause confusion.
+When the same structure name appears in multiple places all possible members
+are included.
+
+
+CSS							*ft-css-omni*
+
+Complete properties and their appropriate values according to CSS 2.1
+specification. 
+
+
+HTML and XHTML						*ft-html-omni*
+							*ft-xhtml-omni*
+
+CTRL-X CTRL-O provides completion of various elements of (X)HTML files.  It is
+designed to support writing of XHTML 1.0 Strict files but will also works for
+other versions of HTML. Features:
+
+- after "<" complete tag name depending on context (no div suggestion inside
+  of an a tag); '/>' indicates empty tags
+- inside of tag complete proper attributes (no width attribute for an a tag);
+  show also type of attribute; '*' indicates required attributes
+- when attribute has limited number of possible values help to complete them
+- complete names of entities
+- complete values of "class" and "id" attributes with data obtained from
+  <style> tag and included CSS files
+- when completing value of "style" attribute or working inside of "style" tag
+  switch to |ft-css-omni| completion
+- when completing values of events attributes or working inside of "script"
+  tag switch to |ft-javascript-omni| completion
+- when used after "</" CTRL-X CTRL-O will close the last opened tag
+
+Note: When used first time completion menu will be shown with little delay
+- this is time needed for loading of data file.  
+Note: Completion may fail in badly formatted documents. In such case try to
+run |:make| command to detect formatting problems.
+
+
+JAVASCRIPT                                             *ft-javascript-omni*
+
+Completion of most elements of JavaScript language and DOM elements.
+
+Complete:
+
+- variables
+- function name; show function arguments
+- function arguments
+- properties of variables trying to detect type of variable
+- complete DOM objects and properties depending on context
+- keywords of language
+
+Completion works in separate JavaScript files (&ft==javascript), inside of
+<script> tag of (X)HTML and in values of event attributes (including scanning
+of external files.
+ 
+DOM compatibility
+
+At the moment (beginning of 2006) there are two main browsers - MS Internet
+Explorer and Mozilla Firefox. These two applications are covering over 90% of
+market. Theoretically standards are created by W3C organisation
+(http://www.w3c.org) but they are not always followed/implemented.
+
+		IE 	FF 	W3C  Omni completion ~
+		+/-     +/-     +    +               ~
+                +       +       -    +               ~
+                +       -       -    -               ~
+                -       +       -    -               ~
+
+Regardless from state of implementation in browsers but if element is defined
+in standards, completion plugin will place element in suggestion list. When
+both major engines implemented element, even if this is not in standards it
+will be suggested. All other elements are not placed in suggestion list.
+
+
+SYNTAX							*ft-syntax-omni*
+
+This uses the current syntax highlighting for completion.  It can be used for
+any filetype and provides a minimal language-sensitive completion.
+
+To enable syntax code completion you can run: >
+	setlocal omnifunc=syntaxcomplete#Complete 
+
+You can automate this by placing the following in your vimrc (after any
+":filetype" command): >
+    if has("autocmd") && exists("+omnifunc")
+        autocmd Filetype *
+                    \	if &omnifunc == "" |
+                    \		setlocal omnifunc=syntaxcomplete#Complete |
+                    \	endif
+    endif
+
+The above will set completion to this script only if a specific plugin does
+not already exist for that filetype.
+
+Each filetype can have a wide range of syntax items.  The plugin allows you to
+customize which syntax groups to include or exclude from the list.  Let's have
+a look at the PHP filetype to see how this works.
+
+If you edit a file called, index.php, run the following command: >
+	:syntax list
+
+First thing you will notice is there are many different syntax groups.  The
+PHP language can include elements from different languages like HTML,
+JavaScript and many more.  The syntax plugin will only include syntax groups
+that begin with the filetype, "php", in this case.  For example these syntax
+groups are included by default with the PHP: phpEnvVar, phpIntVar,
+phpFunctions.
+
+The PHP language has an enormous number of items which it knows how to syntax
+highlight.  This means these items will be available within the omni
+completion list.  Some people may find this list unwieldy or are only
+interested in certain items.
+
+There are two ways to prune this list (if necessary).  If you find certain
+syntax groups you do not wish displayed you can add the following to your
+vimrc: >
+	let g:omni_syntax_group_exclude_php = 'phpCoreConstant,phpConstant'
+
+Add as many syntax groups to this list by comma separating them.  The basic
+form of this variable is: >
+	let g:omni_syntax_group_exclude_{filetype} = 'comma,separated,list'
+
+For completeness the opposite is also true.  Creating this variable in your
+vimrc will only include the items in the phpFunctions and phpMethods syntax
+groups: >
+	let g:omni_syntax_group_include_php = 'phpFunctions,phpMethods'
+
+You can create as many of these variables as you need, varying only the
+filetype at the end of the variable name.
+
+
+XML							*ft-xml-omni*
+
+Vim 7 provides mechanism to context aware completion of XML files.  It depends
+on special |xml-omni-datafile| and two commands: |:XMLns| and |:XMLent|.
+Features are:
+
+- after "<" complete tag name depending on context (no div suggest
+  inside of an a tag)
+- inside of tag complete proper attributes (no width attribute for an
+  a tag)
+- when attribute has limited number of possible values help to complete
+  them
+- complete names of entities (defined in |xml-omni-datafile| and in current file
+  with "<!ENTITY" declarations
+- when used after "</" CTRL-X CTRL-O will close the last opened tag
+
+Format of XML data file					*xml-omni-datafile*
+
+Vim distribution provides two data files as examples (xhtml10s.vim, xsl.vim)
+
+XML data files are stored in "autoload/xml" directory in 'runtimepath'.  They
+have meaningful name which will be used in commands. It should be unique name
+which will not create conflicts in future. For example name xhtml10s.vim means
+it is data file for XHTML 1.0 Strict.
+
+File contains one variable with fixed name: g:xmldata_xhtml10s . It is
+compound from two parts: 
+
+1. "g:xmldata_"  general prefix 
+2. "xhtml10s"    name of file and name of described XML dialect
+
+Part two must be exactly the same as name of file.
+
+Variable is data structure in form of |Dictionary|. Keys are tag names and
+values are two element |List|. First element of List is also List with names
+of possible children, second element is |Dictionary| with names of attributes
+as keys and possible values of attributes as values. Example: >
+
+    let g:xmldata_crippledhtml = {
+    \ "html": 
+    \ [ ["body", "head"], {"id": [], "xmlns": ["http://www.w3.org/1999/xhtml"], 
+    \ "lang": [], "xml:lang": [], "dir": ["ltr", "rtl"]}], 
+    \ "script": 
+    \ [ [], {"id": [], "charset": [], "type": ["text/javascript"], "src": [], 
+    \ "defer": ["BOOL"], "xml:space": ["preserve"]}],
+    \ "meta": 
+    \ [ [], {"id": [], "http-equiv": [], "name": [], "content": [], "scheme": 
+    \ [], "lang": [], "xml:lang": [], "dir": ["ltr", "rtl"]}]
+    \ "vimxmlentities": ["amp", "lt", "gt", "apos", "quot"]},
+    \ "vimxmltaginfo": {
+    \ 'meta': ['/>', '']},
+    \ "vimxmlattrinfo": {
+    \ 'http-equiv': ['ContentType', '']}
+
+This example should be put in "autoload/xml/crippledhtml.vim" file.
+
+In example are visible four special elements:
+
+1. "vimxmlentities" - special key with List containing entities of this XML
+   dialect.
+2. "BOOL" - value of attribute key showing if attribute should be inserted
+   bare ("defer" vs. 'defer="'). It can be the only element of List of
+   attribute values.
+3. "vimxmltaginfo" - special key with dictionary containing as key tag names,
+   as value two element List for additional menu info and long description.
+4. "vimxmlattrinfo" - special key with dictionary containing as key attribute
+   names, as value two element List for additional menu info and long
+   description.
+
+Note: Tag names in data file MUST not contain namespace description. Check
+xsl.vim for example.
+
+
+Commands
+
+:XMLns {name} [{namespace}]					*:XMLns*
+
+Vim has to know which data file should be used and with which namespace. For
+loading of data file and connecting data with prope namespace use |:XMLns|
+command. First (obligatory) argument is name of data (xhtml10s, xsl). Second
+argument is code of namespace (h, xsl). When used without second argument
+dialect will be used as default - without namespace declaration. For example
+to use XML completion in .xsl files: >
+
+	:XMLns xhtml10s
+	:XMLns xsl xsl
+
+
+:XMLent {name}							*:XMLent*
+
+By default entities will be completed from data file of default
+namespace. XMLent command should be used in case when there is no
+default namespace: >
+
+	:XMLent xhtml10s
+
+Usage
+
+While used in situation (after declarations from previous part, | is
+cursor position): >
+
+	<|
+
+Will complete to appropriate XHTML tag, and in this situation: >
+
+	<xsl:|
+
+Will complete to appropriate XSL tag.
+
+File xmlcomplete.vim provides through |autoload| mechanism
+GetLastOpenTag function which can be used in XML files to get name of
+last open tag with (b:unaryTagsStack has to be defined): >
+
+	:echo xmlcomplete#GetLastOpenTag("b:unaryTagsStack")
+
+
+
+
+
 ==============================================================================
 8. Insert mode commands					*inserting*
 
@@ -922,6 +1437,9 @@ i			Insert text before the cursor [count] times.
 							*I*
 I			Insert text before the first non-blank in the line
 			[count] times.
+			When the 'H' flag is present in 'cpoptions' and the
+			line only contains blanks, insert start just before
+			the last blank.
 
 							*gI*
 gI			Insert text in column 1 [count] times.  {not in Vi}
@@ -941,11 +1459,15 @@ gi			Insert text in the same position as where Insert mode
 o			Begin a new line below the cursor and insert text,
 			repeat [count] times.  {Vi: blank [count] screen
 			lines}
+			When the '#' flag is in 'cpoptions' the count is
+			ignored.
 
 							*O*
 O			Begin a new line above the cursor and insert text,
 			repeat [count] times.  {Vi: blank [count] screen
 			lines}
+			When the '#' flag is in 'cpoptions' the count is
+			ignored.
 
 These commands are used to start inserting text.  You can end insert mode with
 <Esc>.  See |mode-ins-repl| for the other special characters in Insert mode.
@@ -963,18 +1485,29 @@ too long when appending characters a line break is automatically inserted.
 9. Ex insert commands					*inserting-ex*
 
 							*:a* *:append*
-:{range}a[ppend]	Insert several lines of text below the specified
+:{range}a[ppend][!]	Insert several lines of text below the specified
 			line.  If the {range} is missing, the text will be
 			inserted after the current line.
+			Adding [!] toggles 'autoindent' for the time this
+			command is executed.
 
 							*:i* *:in* *:insert*
-:{range}i[nsert]	Insert several lines of text above the specified
+:{range}i[nsert][!]	Insert several lines of text above the specified
 			line.  If the {range} is missing, the text will be
 			inserted before the current line.
+			Adding [!] toggles 'autoindent' for the time this
+			command is executed.
 
 These two commands will keep on asking for lines, until you type a line
 containing only a ".".  Watch out for lines starting with a backslash, see
 |line-continuation|.
+When these commands are used with |:global| or |:vglobal| then the lines are
+obtained from the text following the command.  Separate lines with a NL
+escaped with a backslash: >
+	:global/abc/insert\
+	one line\
+	another line
+The final "." is not needed then.
 NOTE: ":append" and ":insert" don't work properly in between ":if" and
 ":endif", ":for" and ":endfor", ":while" and ":endwhile".
 
@@ -986,6 +1519,7 @@ NOTE: ":append" and ":insert" don't work properly in between ":if" and
 			Note that when using this command in a function or
 			script, the insertion only starts after the function
 			or script is finished.
+			This command does not work from |:normal|.
 			{not in Vi}
 			{not available when compiled without the +ex_extra
 			feature}
@@ -1007,6 +1541,13 @@ NOTE: ":append" and ":insert" don't work properly in between ":if" and
 			the function or script is finished.
 			{not in Vi}
 			{not available when compiled without the +ex_extra
+			feature}
+
+							*:startgreplace*
+:startg[replace][!]	Just like |:startreplace|, but use Virtual Replace
+			mode, like with |gR|.
+			{not in Vi}
+			{not available when compiled without the +ex_extra
 			feature}
 
 ==============================================================================

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 7.0aa.  Last change: 2004 Dec 16
+*intro.txt*     For Vim version 7.0aa.  Last change: 2005 Sep 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -151,31 +151,19 @@ example and try to find out which settings or other things influence the
 appearance of the bug.  Try different machines, if possible.  Send me patches
 if you can!
 
-In case of doubt, use: >
+It will help to include information about the version of Vim you are using and
+your setup.  You can get the information with this command: >
    :so $VIMRUNTIME/bugreport.vim
 This will create a file "bugreport.txt" in the current directory, with a lot
 of information of your environment.  Before sending this out, check if it
 doesn't contain any confidential information!
 
-							*debug-vim*
-When Vim crashes in one of the test files, and you are using gcc for
-compilation, here is what you can do to find out exactly where Vim crashes:
+If Vim crashes, please try to find out where.  You can find help on this here:
+|debug.txt|.
 
-1. Compile Vim with the "-g" option (there is a line in the Makefile for this,
-   which you can uncomment).
-
-2. Execute these commands (replace "11" with the test that fails): >
-	cd testdir
-	gdb ../vim
-	run -u unix.vim -U NONE -s dotest.in test11.in
-
-3. Check where Vim crashes, gdb should give a message for this.
-
-4. Get a stack trace from gdb with this command: >
-	where
-<  You can check out different places in the stack trace with: >
-	frame 3
-<  Replace "3" with one of the numbers in the stack trace.
+In case of doubt or when you wonder if the problem has already been fixed but
+you can't find a fix for it, become a member of the vim-dev maillist and ask
+your question there. |maillist|
 
 							*year-2000* *Y2K*
 Since Vim internally doesn't use dates for editing, there is no year 2000
@@ -198,7 +186,7 @@ The user may create scripts for Vim that use external commands.  These might
 introduce Y2K problems, but those are not really part of Vim itself.
 
 ==============================================================================
-3. Credits						*credits* *author*
+3. Credits				*credits* *author* *Bram* *Moolenaar*
 
 Most of Vim was written by Bram Moolenaar <Bram@vim.org>.
 
@@ -289,8 +277,7 @@ Vi	"the original".  Without further remarks this is the version
 Posix	From the IEEE standard 1003.2, Part 2: Shell and utilities.
 	Generally known as "Posix".  This is a textual description of
 	how Vi is supposed to work.
-	The version used is a draft from beginning 1996, so all remarks are
-	"expected to comply to" this.  Anything can change though...
+	See |posix-compliance|.
 							*Nvi*
 Nvi	The "New" Vi.  The version of Vi that comes with BSD 4.4 and FreeBSD.
 	Very good compatibility with the original Vi, with a few extensions.
@@ -331,11 +318,11 @@ and <> are part of what you type, the context should make this clear.
 ["x]		An optional register designation where text can be stored.
 		See |registers|.  The x is a single character between 'a' and
 		'z' or 'A' and 'Z' or '"', and in some cases (with the put
-		command) between '0' and '9', '%', '#', or others. The
+		command) between '0' and '9', '%', '#', or others.  The
 		uppercase and lowercase letter designate the same register,
 		but the lowercase letter is used to overwrite the previous
 		register contents, while the uppercase letter is used to
-		append to the previous register contents. Without the ""x" or
+		append to the previous register contents.  Without the ""x" or
 		with """" the stored text is put into the unnamed register.
 
 							*{}*
@@ -691,9 +678,9 @@ Q			Switch to "Ex" mode.  This is a bit like typing ":"
 			|vimrc_example.vim| script "Q" works like "gq".
 
 					*gQ*
-gQ			Switch to "Ex" mode, but really behave like typing ":"
-			commands after another.  All command line editing,
-			completion etc. is available.
+gQ			Switch to "Ex" mode like with "Q", but really behave
+			like typing ":" commands after another.  All command
+			line editing, completion etc. is available.
 			Use the ":vi" command |:visual| to exit "Ex" mode.
 			{not in Vi}
 

runtime/doc/makehtml.awk

@@ -581,7 +581,7 @@ function find_tag2() {
 	ntags=split(atag,blata,"[ 	]");
 	if ( ntags > 1 ) { return; }
 	if 	( ( allow_one_char == "no" ) && \
-		  ( index("!#$%\&'()+,-./0:;=?@ACINX\\[\\]^_`at\\{\\}~",atag) !=0 ) ) {
+		  ( index("!#$%&'()+,-./0:;=?@ACINX\\[\\]^_`at\\{\\}~",atag) !=0 ) ) {
 		return;
 	}
 	if ( skip_word[atag] == "yes" ) { return; }
@@ -610,7 +610,7 @@ function find_tag3() {
 	ntags=split(btag,blata,"[ 	]");
 	if ( ntags > 1 ) { return; }
 	if 	( ( allow_one_char == "no" ) && \
-		  ( index("!#$%\&'()+,-./0:;=?@ACINX\\[\\]^_`at\\{\\}~",btag) !=0 ) ) {
+		  ( index("!#$%&'()+,-./0:;=?@ACINX\\[\\]^_`at\\{\\}~",btag) !=0 ) ) {
 	  	return;
 	}
 	if ( skip_word[btag] == "yes" ) { return; }

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.0aa.  Last change: 2004 Dec 29
+*map.txt*       For Vim version 7.0aa.  Last change: 2006 Feb 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -10,6 +10,17 @@ This subject is introduced in sections |05.3|, |24.7| and |40.1| of the user
 manual.
 
 1. Key mapping			|key-mapping|
+   1.1 MAP COMMANDS			|:map-commands|
+   1.2 Special arguments		|:map-arguments|
+   1.3 Mapping and modes		|:map-modes|
+   1.4 Listing mappings			|map-listing|
+   1.5 Mapping special keys		|:map-special-keys|
+   1.6 Special characters		|:map-special-chars|
+   1.7 What keys to map			|map-which-keys|
+   1.8 Examples				|map-examples|
+   1.9 Using mappings			|map-typing|
+   1.10 Mapping alt-keys		|:map-alt-keys|
+   1.11 Mapping an operator		|:map-operator|
 2. Abbreviations		|abbreviations|
 3. Local mappings and functions	|script-local|
 4. User-defined commands	|user-commands|
@@ -22,7 +33,10 @@ is to define a sequence commands for a function key.  Example: >
 
 	:map <F2> a<C-R>=strftime("%c")<CR><Esc>
 
-This appends the current date and time after the cursor. (in <> notation |<>|)
+This appends the current date and time after the cursor (in <> notation |<>|).
+
+
+1.1 MAP COMMANDS					*:map-commands*
 
 There are commands to enter new mappings, remove mappings and list mappings.
 See |map-overview| for the various forms of "map" and their relationships with
@@ -31,42 +45,42 @@ modes.
 {lhs}	means left-hand-side	*{lhs}*
 {rhs}	means right-hand-side	*{rhs}*
 
-:map	{lhs} {rhs}					*:map*
-:nm[ap]	{lhs} {rhs}					*:nm* *:nmap*
-:vm[ap]	{lhs} {rhs}					*:vm* *:vmap*
-:om[ap]	{lhs} {rhs}					*:om* *:omap*
-:map!	{lhs} {rhs}					*:map!*
-:im[ap]	{lhs} {rhs}					*:im* *:imap*
-:lm[ap]	{lhs} {rhs}					*:lm* *:lmap*
-:cm[ap]	{lhs} {rhs}					*:cm* *:cmap*
+:map	{lhs} {rhs}		|mapmode-nvo|		*:map*
+:nm[ap]	{lhs} {rhs}		|mapmode-n|		*:nm* *:nmap*
+:vm[ap]	{lhs} {rhs}		|mapmode-v|		*:vm* *:vmap*
+:om[ap]	{lhs} {rhs}		|mapmode-o|		*:om* *:omap*
+:map!	{lhs} {rhs}		|mapmode-ic|		*:map!*
+:im[ap]	{lhs} {rhs}		|mapmode-i|		*:im* *:imap*
+:lm[ap]	{lhs} {rhs}		|mapmode-l|		*:lm* *:lmap*
+:cm[ap]	{lhs} {rhs}		|mapmode-c|		*:cm* *:cmap*
 			Map the key sequence {lhs} to {rhs} for the modes
 			where the map command applies.  The result, including
 			{rhs}, is then further scanned for mappings.  This
 			allows for nested and recursive use of mappings.
 
 
-:no[remap]  {lhs} {rhs}					*:no*  *:noremap*
-:nn[oremap] {lhs} {rhs}					*:nn*  *:nnoremap*
-:vn[oremap] {lhs} {rhs}					*:vn*  *:vnoremap*
-:ono[remap] {lhs} {rhs}					*:ono* *:onoremap*
-:no[remap]! {lhs} {rhs}					*:no!* *:noremap!*
-:ino[remap] {lhs} {rhs}					*:ino* *:inoremap*
-:ln[oremap] {lhs} {rhs}					*:ln*  *:lnoremap*
-:cno[remap] {lhs} {rhs}					*:cno* *:cnoremap*
+:no[remap]  {lhs} {rhs}		|mapmode-nvo|		*:no*  *:noremap*
+:nn[oremap] {lhs} {rhs}		|mapmode-n|		*:nn*  *:nnoremap*
+:vn[oremap] {lhs} {rhs}		|mapmode-v|		*:vn*  *:vnoremap*
+:ono[remap] {lhs} {rhs}		|mapmode-o|		*:ono* *:onoremap*
+:no[remap]! {lhs} {rhs}		|mapmode-ic|		*:no!* *:noremap!*
+:ino[remap] {lhs} {rhs}		|mapmode-i|		*:ino* *:inoremap*
+:ln[oremap] {lhs} {rhs}		|mapmode-l|		*:ln*  *:lnoremap*
+:cno[remap] {lhs} {rhs}		|mapmode-c|		*:cno* *:cnoremap*
 			Map the key sequence {lhs} to {rhs} for the modes
 			where the map command applies.  Disallow mapping of
 			{rhs}, to avoid nested and recursive mappings.  Often
 			used to redefine a command.  {not in Vi}
 
 
-:unm[ap]  {lhs}						*:unm*  *:unmap*
-:nun[map] {lhs}						*:nun*  *:nunmap*
-:vu[nmap] {lhs}						*:vu*   *:vunmap*
-:ou[nmap] {lhs}						*:ou*   *:ounmap*
-:unm[ap]! {lhs}						*:unm!* *:unmap!*
-:iu[nmap] {lhs}						*:iu*   *:iunmap*
-:lu[nmap] {lhs}						*:lu*   *:lunmap*
-:cu[nmap] {lhs}						*:cu*   *:cunmap*
+:unm[ap]  {lhs}			|mapmode-nvo|		*:unm*  *:unmap*
+:nun[map] {lhs}			|mapmode-n|		*:nun*  *:nunmap*
+:vu[nmap] {lhs}			|mapmode-v|		*:vu*   *:vunmap*
+:ou[nmap] {lhs}			|mapmode-o|		*:ou*   *:ounmap*
+:unm[ap]! {lhs}			|mapmode-ic|		*:unm!* *:unmap!*
+:iu[nmap] {lhs}			|mapmode-i|		*:iu*   *:iunmap*
+:lu[nmap] {lhs}			|mapmode-l|		*:lu*   *:lunmap*
+:cu[nmap] {lhs}			|mapmode-c|		*:cu*   *:cunmap*
 			Remove the mapping of {lhs} for the modes where the
 			map command applies.  The mapping may remain defined
 			for other modes where it applies.
@@ -75,38 +89,38 @@ modes.
 				:map @@ foo
 				:unmap @@ | print
 
-:mapc[lear]						*:mapc*   *:mapclear*
-:nmapc[lear]						*:nmapc*  *:nmapclear*
-:vmapc[lear]						*:vmapc*  *:vmapclear*
-:omapc[lear]						*:omapc*  *:omapclear*
-:mapc[lear]!						*:mapc!*  *:mapclear!*
-:imapc[lear]						*:imapc*  *:imapclear*
-:lmapc[lear]						*:lmapc*  *:lmapclear*
-:cmapc[lear]						*:cmapc*  *:cmapclear*
+:mapc[lear]			|mapmode-nvo|		*:mapc*   *:mapclear*
+:nmapc[lear]			|mapmode-n|		*:nmapc*  *:nmapclear*
+:vmapc[lear]			|mapmode-v|		*:vmapc*  *:vmapclear*
+:omapc[lear]			|mapmode-o|		*:omapc*  *:omapclear*
+:mapc[lear]!			|mapmode-ic|		*:mapc!*  *:mapclear!*
+:imapc[lear]			|mapmode-i|		*:imapc*  *:imapclear*
+:lmapc[lear]			|mapmode-l|		*:lmapc*  *:lmapclear*
+:cmapc[lear]			|mapmode-c|		*:cmapc*  *:cmapclear*
 			Remove ALL mappings for the modes where the map
 			command applies.  {not in Vi}
 			Warning: This also removes the default mappings.
 
-:map
-:nm[ap]
-:vm[ap]
-:om[ap]
-:map!
-:im[ap]
-:lm[ap]
-:cm[ap]
+:map				|mapmode-nvo|
+:nm[ap]				|mapmode-n|
+:vm[ap]				|mapmode-v|
+:om[ap]				|mapmode-o|
+:map!				|mapmode-ic|
+:im[ap]				|mapmode-i|
+:lm[ap]				|mapmode-l|
+:cm[ap]				|mapmode-c|
 			List all key mappings for the modes where the map
 			command applies.  Note that ":map" and ":map!" are
 			used most often, because they include the other modes.
 
-:map    {lhs}						*:map_l*
-:nm[ap] {lhs}						*:nmap_l*
-:vm[ap] {lhs}						*:vmap_l*
-:om[ap] {lhs}						*:omap_l*
-:map!   {lhs}						*:map_l!*
-:im[ap] {lhs}						*:imap_l*
-:lm[ap] {lhs}						*:lmap_l*
-:cm[ap] {lhs}						*:cmap_l*
+:map    {lhs}			|mapmode-nvo|		*:map_l*
+:nm[ap] {lhs}			|mapmode-n|		*:nmap_l*
+:vm[ap] {lhs}			|mapmode-v|		*:vmap_l*
+:om[ap] {lhs}			|mapmode-o|		*:omap_l*
+:map!   {lhs}			|mapmode-ic|		*:map_l!*
+:im[ap] {lhs}			|mapmode-i|		*:imap_l*
+:lm[ap] {lhs}			|mapmode-l|		*:lmap_l*
+:cm[ap] {lhs}			|mapmode-c|		*:cmap_l*
 			List the key mappings for the key sequences starting
 			with {lhs} in the modes where the map command applies.
 			{not in Vi}
@@ -116,6 +130,21 @@ characters.  You can use this to put command sequences under function keys,
 translate one key into another, etc.  See |:mkexrc| for how to save and
 restore the current mappings.
 
+							*map-ambiguous*
+When two mappings start with the same sequence of characters, they are
+ambiguous.  Example: >
+	:imap aa foo
+	:imap aaa bar
+When Vim has read "aa", it will need to get another character to be able to
+decide if "aa" or "aaa" should be mapped.  This means that after typing "aa"
+that mapping won't get expanded yet, Vim is waiting for another character.
+If you type a space, then "foo" will get inserted, plus the space.  If you
+type "a", then "bar" will get inserted.
+{Vi does not allow ambiguous mappings}
+
+
+1.2 SPECIAL ARGUMENTS					*:map-arguments*
+
 				*:map-local* *:map-<buffer>* *E224* *E225*
 If the first argument to one of these commands is "<buffer>" it will apply to
 mappings locally to the current buffer only.  Example: >
@@ -162,19 +191,21 @@ already exists which is equal.
 Example of what will fail: >
 	:map ,w  /[#&!]<CR>
 	:map <buffer> <unique> ,w  /[.,;]<CR>
+If you want to map a key and then have it do what it was originally mapped to,
+have a look at |maparg()|.
 
 "<buffer>", "<silent>", "<script>" and "<unique>" can be used in any order.
 They must appear right after the command, before any other arguments.
 
 
-MAPPING AND MODES
+1.3 MAPPING AND MODES					*:map-modes*
 
 There are five sets of mappings
 - For Normal mode: When typing commands.
 - For Visual mode: When typing commands while the Visual area is highlighted.
 - For Operator-pending mode: When an operator is pending (after "d", "y", "c",
   etc.).  Example: ":omap { w" makes "y{" work like "yw" and "d{" like "dw".
-- For Insert mode. These are also used in Replace mode.
+- For Insert mode.  These are also used in Replace mode.
 - For Command-line mode: When entering a ":" or "/" command.
 
 There are no separate mappings for Select mode.  The same as for Visual mode
@@ -187,6 +218,7 @@ to type a count with a zero.
 						*map-overview* *map-modes*
 Overview of which map command works in which mode:
 
+			*mapmode-nvo* *mapmode-n* *mapmode-v* *mapmode-o*
     commands:				      modes: ~
 					  Normal     Visual  Operator-pending ~
 :map   :noremap   :unmap   :mapclear	    yes	       yes	  yes
@@ -194,6 +226,7 @@ Overview of which map command works in which mode:
 :vmap  :vnoremap  :vunmap  :vmapclear	     -	       yes	   -
 :omap  :onoremap  :ounmap  :omapclear	     -		-	  yes
 
+			*mapmode-ic* *mapmode-i* *mapmode-c* *mapmode-l*
 					  Insert  Command-line	Lang-Arg ~
 :map!  :noremap!  :unmap!  :mapclear!	    yes	       yes	   -
 :imap  :inoremap  :iunmap  :imapclear	    yes		-	   -
@@ -236,19 +269,9 @@ character as an argument to command like "f" or "t".
 are only used for typed characters.  This assumes that the language mapping
 was already done when typing the mapping.
 
-							*map-multibyte*
-It is possible to map multibyte characters, but only the whole character.  You
-cannot map the first byte only.  This was done to prevent problems in this
-scenario: >
-	:set encoding=latin1
-	:imap <M-C> foo
-	:set encoding=utf-8
-The mapping for <M-C> is defined with the latin1 encoding, resulting in a 0xc3
-byte.  If you type the character <20> (0xea <M-a>) in UTF-8 encoding this is the
-two bytes 0xc3 0xa1.  You don't want the 0xc3 byte to be mapped then,
-otherwise it would be impossible to type the <20> character.
 
-							*map-listing*
+1.4 LISTING MAPPINGS					*map-listing*
+
 When listing mappings the characters in the first two columns are:
 
       CHAR	MODE	~
@@ -273,6 +296,58 @@ with a space.
 Note: When using mappings for Visual mode, you can use the "'<" mark, which
 is the start of the last selected Visual area in the current buffer |'<|.
 
+							*:map-verbose*
+When 'verbose' is non-zero, listing a key map will also display where it was
+last defined.  Example: >
+
+	:verbose map <C-W>*
+	n  <C-W>*      * <C-W><C-S>*
+	        Last set from /home/abcd/.vimrc
+
+See |:verbose-cmd| for more information.
+
+
+1.5 MAPPING SPECIAL KEYS				*:map-special-keys*
+
+There are three ways to map a special key:
+1. The Vi-compatible method: Map the key code.  Often this is a sequence that
+   starts with <Esc>.  To enter a mapping like this you type ":map " and then
+   you have to type CTRL-V before hitting the function key.  Note that when
+   the key code for the key is in the termcap (the t_ options), it will
+   automatically be translated into the internal code and become the second
+   way of mapping (unless the 'k' flag is included in 'cpoptions').
+2. The second method is to use the internal code for the function key.  To
+   enter such a mapping type CTRL-K and then hit the function key, or use
+   the form "#1", "#2", .. "#9", "#0", "<Up>", "<S-Down>", "<S-F7>", etc.
+   (see table of keys |key-notation|, all keys from <Up> can be used).  The
+   first ten function keys can be defined in two ways: Just the number, like
+   "#2", and with "<F>", like "<F2>".  Both stand for function key 2.  "#0"
+   refers to function key 10, defined with option 't_f10', which may be
+   function key zero on some keyboards.  The <> form cannot be used when
+   'cpoptions' includes the '<' flag.
+3. Use the termcap entry, with the form <t_xx>, where "xx" is the name of the
+   termcap entry.  Any string entry can be used.  For example: >
+     :map <t_F3> G
+<  Maps function key 13 to "G".  This does not work if 'cpoptions' includes
+   the '<' flag.
+
+The advantage of the second and third method is that the mapping will work on
+different terminals without modification (the function key will be
+translated into the same internal code or the actual key code, no matter what
+terminal you are using.  The termcap must be correct for this to work, and you
+must use the same mappings).
+
+DETAIL: Vim first checks if a sequence from the keyboard is mapped.  If it
+isn't the terminal key codes are tried (see |terminal-options|).  If a
+terminal code is found it is replaced with the internal code.  Then the check
+for a mapping is done again (so you can map an internal code to something
+else).  What is written into the script file depends on what is recognized.
+If the terminal key code was recognized as a mapping the key code itself is
+written to the script file.  If it was recognized as a terminal code the
+internal code is written to the script file.
+
+
+1.6 SPECIAL CHARACTERS					*:map-special-chars*
 							*map_backslash*
 Note that only CTRL-V is mentioned here as a special character for mappings
 and abbreviations.  When 'cpoptions' does not contain 'B', a backslash can
@@ -284,23 +359,12 @@ To map a backslash, or use a backslash literally in the {rhs}, the special
 sequence "<Bslash>" can be used.  This avoids the need to double backslashes
 when using nested mappings.
 
-							*map-ambiguous*
-When two mappings start with the same sequence of characters, they are
-ambiguous.  Example: >
-	:imap aa foo
-	:imap aaa bar
-When Vim has read "aa", it will need to get another character to be able to
-decide if "aa" or "aaa" should be mapped.  This means that after typing "aa"
-that mapping won't get expanded yet, Vim is waiting for another character.
-If you type a space, then "foo" will get inserted, plus the space.  If you
-type "a", then "bar" will get inserted.
-{Vi does not allow ambiguous mappings}
-
-							*map_CTRL_C*
-It's not possible to use a CTRL-C in the {lhs}.  You just can't map CTRL-C.
-The reason is that CTRL-C must always be available to break a running command.
-Exception: When using the GUI version on MS-Windows CTRL-C can be mapped to
-allow a Copy command to the clipboard.  Use CTRL-Break to interrupt Vim.
+							*map_CTRL-C*
+Using CTRL-C in the {lhs} is possible, but it will only work when Vim is
+waiting for a key, not when Vim is busy with something.  When Vim is busy
+CTRL-C interrupts/breaks the command.
+When using the GUI version on MS-Windows CTRL-C can be mapped to allow a Copy
+command to the clipboard.  Use CTRL-Break to interrupt Vim.
 
 							*map_space_in_lhs*
 To include a space in {lhs} precede it with a CTRL-V (type two CTRL-Vs for
@@ -320,6 +384,18 @@ example, to make sure that function key 8 does nothing at all: >
 	:map  <F8>  <Nop>
 	:map! <F8>  <Nop>
 <
+							*map-multibyte*
+It is possible to map multibyte characters, but only the whole character.  You
+cannot map the first byte only.  This was done to prevent problems in this
+scenario: >
+	:set encoding=latin1
+	:imap <M-C> foo
+	:set encoding=utf-8
+The mapping for <M-C> is defined with the latin1 encoding, resulting in a 0xc3
+byte.  If you type the character <20> (0xea <M-a>) in UTF-8 encoding this is the
+two bytes 0xc3 0xa1.  You don't want the 0xc3 byte to be mapped then,
+otherwise it would be impossible to type the <20> character.
+
 					*<Leader>* *mapleader*
 To define a mapping which uses the "mapleader" variable, the special string
 "<Leader>" can be used.  It is replaced with the string value of "mapleader".
@@ -407,14 +483,16 @@ and CTRL-X is not mapped.  This was done to be able to use all the named
 registers and marks, even when the command with the same name has been
 mapped.
 
-							*map-which-keys*
+
+1.7 WHAT KEYS TO MAP					*map-which-keys*
+
 If you are going to map something, you will need to choose which key(s) to use
 for the {lhs}.  You will have to avoid keys that are used for Vim commands,
 otherwise you would not be able to use those commands anymore.  Here are a few
 suggestions:
 - Function keys <F2>, <F3>, etc..  Also the shifted function keys <S-F1>,
   <S-F2>, etc.  Note that <F1> is already used for the help command.
-- Meta-keys (with the ALT key pressed).
+- Meta-keys (with the ALT key pressed). |:map-alt-keys|
 - Use the '_' or ',' character and then any other character.  The "_" and ","
   commands do exist in Vim (see |_| and |,|), but you probably never use them.
 - Use a key that is a synonym for another command.  For example: CTRL-P and
@@ -425,7 +503,9 @@ losing any builtin function.  You can also use ":help {key}^D" to find out if
 a key is used for some command.  ({key} is the specific key you want to find
 out about, ^D is CTRL-D).
 
-							*map-examples*
+
+1.8 EXAMPLES						*map-examples*
+
 A few examples (given as you type them, for "<CR>" you type four characters;
 the '<' flag must not be present in 'cpoptions' for this to work). >
 
@@ -434,7 +514,9 @@ the '<' flag must not be present in 'cpoptions' for this to work). >
    :map _x    d/END/e<CR>
    :map! qq   quadrillion questions
 <
-							*map-typing*
+
+1.9 USING MAPPINGS					*map-typing*
+
 Vim will compare what you type with the start of a mapped sequence.  If there
 is an incomplete match, it will get more characters until there either is a
 complete match or until there is no match at all.  Example: If you map! "qq",
@@ -447,14 +529,15 @@ you type slowly, or your system is slow, reset the 'timeout' option.  Then you
 might want to set the 'ttimeout' option.
 
 							*map-keys-fails*
-There is one situation where key codes might not be recognized:
+There are situations where key codes might not be recognized:
 - Vim can only read part of the key code.  Mostly this is only the first
   character.  This happens on some Unix versions in an xterm.
 - The key code is after character(s) that are mapped.  E.g., "<F1><F1>" or
   "g<F1>".
+
 The result is that the key code is not recognized in this situation, and the
-mapping fails.
-There are two actions needed to avoid this problem:
+mapping fails.  There are two actions needed to avoid this problem:
+
 - Remove the 'K' flag from 'cpoptions'.  This will make Vim wait for the rest
   of the characters of the function key.
 - When using <F1> to <F4> the actual key code generated may correspond to
@@ -470,6 +553,9 @@ special key: >
 Don't type a real <Esc>, Vim will recognize the key code and replace it with
 <F1> anyway.
 
+Another problem may be that when keeping ALT or Meta pressed the terminal
+prepends ESC instead of setting the 8th bit.  See |:map-alt-keys|.
+
 						*recursive_mapping*
 If you include the {lhs} in the {rhs} you have a recursive mapping.  When
 {lhs} is typed, it will be replaced with {rhs}.  When the {lhs} which is
@@ -506,43 +592,104 @@ the original Vi, as long as there is only one undo command in the mapped
 sequence (having two undo commands in a mapped sequence did not make sense
 in the original Vi, you would get back the text before the first undo).
 
-							*:map-special-keys*
-There are three ways to map a special key:
-1. The Vi-compatible method: Map the key code.  Often this is a sequence that
-   starts with <Esc>.  To enter a mapping like this you type ":map " and then
-   you have to type CTRL-V before hitting the function key.  Note that when
-   the key code for the key is in the termcap (the t_ options), it will
-   automatically be translated into the internal code and become the second
-   way of mapping (unless the 'k' flag is included in 'cpoptions').
-2. The second method is to use the internal code for the function key.  To
-   enter such a mapping type CTRL-K and then hit the function key, or use
-   the form "#1", "#2", .. "#9", "#0", "<Up>", "<S-Down>", "<S-F7>", etc.
-   (see table of keys |key-notation|, all keys from <Up> can be used).  The
-   first ten function keys can be defined in two ways: Just the number, like
-   "#2", and with "<F>", like "<F2>".  Both stand for function key 2.  "#0"
-   refers to function key 10, defined with option 't_f10', which may be
-   function key zero on some keyboards.  The <> form cannot be used when
-   'cpoptions' includes the '<' flag.
-3. Use the termcap entry, with the form <t_xx>, where "xx" is the name of the
-   termcap entry.  Any string entry can be used.  For example: >
-     :map <t_F3> G
-<  Maps function key 13 to "G".  This does not work if 'cpoptions' includes
-   the '<' flag.
 
-The advantage of the second and third method is that the mapping will work on
-different terminals without modification (the function key will be
-translated into the same internal code or the actual key code, no matter what
-terminal you are using.  The termcap must be correct for this to work, and you
-must use the same mappings).
+1.10 MAPPING ALT-KEYS					*:map-alt-keys*
 
-DETAIL: Vim first checks if a sequence from the keyboard is mapped.  If it
-isn't the terminal key codes are tried (see |terminal-options|).  If a
-terminal code is found it is replaced with the internal code.  Then the check
-for a mapping is done again (so you can map an internal code to something
-else).  What is written into the script file depends on what is recognized.
-If the terminal key code was recognized as a mapping the key code itself is
-written to the script file.  If it was recognized as a terminal code the
-internal code is written to the script file.
+In the GUI Vim handles the Alt key itself, thus mapping keys with ALT should
+always work.  But in a terminal Vim gets a sequence of bytes and has to figure
+out whether ALT was pressed or not.
+
+By default Vim assumes that pressing the ALT key sets the 8th bit of a typed
+character.  Most decent terminals can work that way, such as xterm, aterm and
+rxvt.  If your <A-k> mappings don't work it might be that the terminal is
+prefixing the character with an ESC character.  But you can just as well type
+ESC before a character, thus Vim doesn't know what happened (except for
+checking the delay between characters, which is not reliable).
+
+As of this writing, some mainstream terminals like gnome-terminal and konsole
+use the ESC prefix.  There doesn't appear a way to have them use the 8th bit
+instead.  Xterm should work well by default.  Aterm and rxvt should work well
+when started with the "--meta8" argument.  You can also tweak resources like
+"metaSendsEscape", "eightBitInput" and "eightBitOutput".
+
+On the Linux console, this behavior can be toggled with the "setmetamode"
+command.  Bear in mind that not using an ESC prefix could get you in trouble
+with other programs.  You should make sure that bash has the "convert-meta"
+option set to "on" in order for your Meta keybindings to still work on it
+(it's the default readline behavior, unless changed by specific system
+configuration).  For that, you can add the line: >
+
+	set convert-meta on
+
+to your ~/.inputrc file. If you're creating the file, you might want to use: >
+
+	$include /etc/inputrc
+
+as the first line, if that file exists on your system, to keep global options.
+This may cause a problem for entering special characters, such as the umlaut.
+Then you should use CTRL-V before that character.
+
+Bear in mind that convert-meta has been reported to have troubles when used in
+UTF-8 locales.  On terminals like xterm, the "metaSendsEscape" resource can be
+toggled on the fly through the "Main Options" menu, by pressing Ctrl-LeftClick
+on the terminal; that's a good last resource in case you want to send ESC when
+using other applications but not when inside VIM.
+
+
+1.11 MAPPING AN OPERATOR				*:map-operator*
+
+An operator is used before a {motion} command.  To define your own operator
+you must create mapping that first sets the 'operatorfunc' option and then
+invoke the |g@| operator.  After the user types the {motion} command the
+specified function will be called.
+
+							*g@* *E774* *E775*
+g@{motion}		Call the function set by the 'operatorfunc' option.
+			The '[ mark is positioned at the start of the text
+			moved over by {motion}, the '] mark on the last
+			character of the text.
+			The function is called with one String argument:
+			    "line"	{motion} was |linewise|
+			    "char"	{motion} was |characterwise|
+			    "block"	{motion} was |blockwise-visual||
+			Although "block" would rarely appear, since it can
+			only result from Visual mode where "g@" is not useful.
+			{not available when compiled without the +eval
+			feature}
+
+Here is an example that counts the number of spaces with <F4>: >
+
+	nmap <silent> <F4> :set opfunc=CountSpaces<CR>g@
+	vmap <silent> <F4> :<C-U>call CountSpaces(visualmode(), 1)<CR>
+
+	function! CountSpaces(type, ...)
+	  let sel_save = &selection
+	  let &selection = "inclusive"
+	  let reg_save = @@
+
+	  if a:0  " Invoked from Visual mode, use '< and '> marks.
+	    silent exe "normal! `<" . a:type . "`>y"
+	  elseif a:type == 'line'
+	    silent exe "normal! '[V']y"
+	  elseif a:type == 'block'
+	    silent exe "normal! `[\<C-V>`]y"
+	  else
+	    silent exe "normal! `[v`]y"
+	  endif
+
+	  echomsg strlen(substitute(@@, '[^ ]', '', 'g'))
+
+	  let &selection = sel_save
+	  let @@ = reg_save
+	endfunction
+
+Note that the 'selection' option is temporarily set to "inclusive" to be able
+to yank exactly the right text by using Visual mode from the '[ to the ']
+mark.
+
+Also note that there is a separate mapping for Visual mode.  It removes the
+"'<,'>" range that ":" inserts in Visual mode and invokes the function with
+visualmode() and an extra argument.
 
 ==============================================================================
 2. Abbreviations			*abbreviations* *Abbreviations*
@@ -631,7 +778,7 @@ This does not work if 'cpoptions' includes the '<' flag. |<>|
 You can even do more complicated things.  For example, to consume the space
 typed after an abbreviation: >
    func Eatchar(pat)
-      let c = nr2char(getchar())
+      let c = nr2char(getchar(0))
       return (c =~ a:pat) ? '' : c
    endfunc
    iabbr <silent> if if ()<Left><C-R>=Eatchar('\s')<CR>
@@ -656,6 +803,16 @@ used in a |filetype-plugin| file.  Example for a C plugin file: >
 			mode, '!' for both.  These are the same as for
 			mappings, see |map-listing|.
 
+						*:abbreviate-verbose*
+When 'verbose' is non-zero, listing an abbreviation will also display where it
+was last defined.  Example: >
+
+	:verbose abbreviate
+	!  teh           the
+		Last set from /home/abcd/vim/abbr.vim
+
+See |:verbose-cmd| for more information.
+
 :ab[breviate] {lhs}	list the abbreviations that start with {lhs}
 			You may need to insert a CTRL-V (type it twice) to
 			avoid that a typed {lhs} is expanded, since
@@ -793,11 +950,10 @@ local function or uses a local mapping.
 Otherwise, using "<SID>" outside of a script context is an error.
 
 If you need to get the script number to use in a complicated script, you can
-use this trick: >
-	:map <SID>xx <SID>xx
-	:let s:sid = maparg("<SID>xx")
-	:unmap <SID>xx
-And remove the trailing "xx".
+use this function: >
+	function s:SID()
+	  return matchstr(expand('<sfile>'), '<SNR>\zs\d\+\ze_SID$')
+	endfun
 
 The "<SNR>" will be shown when listing functions and mappings.  This is useful
 to find out what they are defined to.
@@ -811,7 +967,7 @@ feature}.
 ==============================================================================
 4. User-defined commands				*user-commands*
 
-It is possible to define your own Ex commands. A user-defined command can act
+It is possible to define your own Ex commands.  A user-defined command can act
 just like a built-in command (it can have a range or arguments, arguments can
 be completed as filenames or buffer names, etc), except that when the command
 is executed, it is transformed into a normal ex command and then executed.
@@ -820,7 +976,7 @@ For starters: See section |40.2| in the user manual.
 
 						*E183* *user-cmd-ambiguous*
 All user defined commands must start with an uppercase letter, to avoid
-confusion with builtin commands. (There are a few builtin commands, notably
+confusion with builtin commands.  (There are a few builtin commands, notably
 :Next, :Print and :X, which do start with an uppercase letter.  The builtin
 will always take precedence in these cases).  The other characters of the user
 command can be uppercase letters, lowercase letters or digits.  When using
@@ -829,8 +985,8 @@ ambiguous.  For example, the command ":Cc2" could be the user command ":Cc2"
 without an argument, or the command ":Cc" with argument "2".  It is advised to
 put a space between the command name and the argument to avoid these problems.
 
-When using a user-defined command, the command can be abbreviated. However, if
-an abbreviation is not unique, an error will be issued. Furthermore, a
+When using a user-defined command, the command can be abbreviated.  However, if
+an abbreviation is not unique, an error will be issued.  Furthermore, a
 built-in command will always take precedence.
 
 Example: >
@@ -846,7 +1002,7 @@ It is recommended that full names for user-defined commands are used in
 scripts.
 
 :com[mand]						*:com* *:command*
-			List all user-defined commands. When listing commands,
+			List all user-defined commands.  When listing commands,
 			the characters in the first two columns are
 			    !	Command has the -bang attribute
 			    "	Command has the -register attribute
@@ -855,11 +1011,22 @@ scripts.
 
 :com[mand] {cmd}	List the user-defined commands that start with {cmd}
 
+							*:command-verbose*
+When 'verbose' is non-zero, listing a command will also display where it was
+last defined. Example: >
+
+    :verbose command TOhtml
+	Name        Args Range Complete  Definition
+	TOhtml      0    %               :call Convert2HTML(<line1>, <line2>)
+	    Last set from /usr/share/vim/vim-7.0/plugin/tohtml.vim
+<
+See |:verbose-cmd| for more information.
+
 							*E174* *E182*
 :com[mand][!] [{attr}...] {cmd} {rep}
 			Define a user command.  The name of the command is
-			{cmd} and its replacement text is {rep}. The command's
-			attributes (see below) are {attr}. If the command
+			{cmd} and its replacement text is {rep}.  The command's
+			attributes (see below) are {attr}.  If the command
 			already exists, an error is reported, unless a ! is
 			specified, in which case the command is redefined.
 
@@ -871,20 +1038,20 @@ scripts.
 
 Command attributes
 
-User-defined commands are treated by Vim just like any other ex commands. They
-can have arguments, or have a range specified. Arguments are subject to
-completion as filenames, buffers, etc. Exactly how this works depends upon the
+User-defined commands are treated by Vim just like any other ex commands.  They
+can have arguments, or have a range specified.  Arguments are subject to
+completion as filenames, buffers, etc.  Exactly how this works depends upon the
 command's attributes, which are specified when the command is defined.
 
 There are a number of attributes, split into four categories: argument
-handling, completion behavior, range handling, and special cases. The
+handling, completion behavior, range handling, and special cases.  The
 attributes are described below, by category.
 
 Argument handling					*E175* *E176*
 
 By default, a user defined command will take no arguments (and an error is
-reported if any are supplied). However, it is possible to specify that the
-command can take arguments, using the -nargs attribute. Valid cases are:
+reported if any are supplied).  However, it is possible to specify that the
+command can take arguments, using the -nargs attribute.  Valid cases are:
 
 	-nargs=0    No arguments are allowed (the default)
 	-nargs=1    Exactly one argument is required
@@ -932,26 +1099,38 @@ completion can be enabled:
 	-complete=tag_listfiles	tags, file names are shown when CTRL-D is hit
 	-complete=var		user variables
 	-complete=custom,{func} custom completion, defined via {func}
+	-complete=customlist,{func} custom completion, defined via {func}
 
-Custom completion			    *:command-completion-custom*
-							*E467* *E468*
+
+Custom completion			*:command-completion-custom*
+					*:command-completion-customlist*
+					*E467* *E468*
 It is possible to define customized completion schemes via the "custom,{func}"
-completion argument.  The {func} part should be a function with the following
-prototype >
+or the "customlist,{func}" completion argument.  The {func} part should be a
+function with the following prototype >
 
 	:function {func}(ArgLead, CmdLine, CursorPos)
 
-The function need not use all these arguments, but it should provide the
-completion candidates as the return value, one per line in a newline separated
-string.  The function arguments are:
+The function need not use all these arguments. The function should provide the
+completion candidates as the return value.
+
+For the "custom" argument, the function should return the completion
+candidates one per line in a newline separated string.
+
+For the "customlist" argument, the function should return the completion
+candidates as a Vim List.  Non-string items in the list are ignored.
+
+The function arguments are:
 	ArgLead		the leading portion of the argument currently being
 			completed on
 	CmdLine		the entire command line
-	CursorPos	the cursor position in it
-The function may use these for determining context.  It is not necessary to
-filter candidates against the (implicit pattern in) ArgLead.  Vim will do
-filter the candidates with its regexp engine after function return, and this
-is probably more efficient in most cases.
+	CursorPos	the cursor position in it (byte index)
+The function may use these for determining context.  For the "custom"
+argument, it is not necessary to filter candidates against the (implicit
+pattern in) ArgLead.  Vim will do filter the candidates with its regexp engine
+after function return, and this is probably more efficient in most cases. For
+the "customlist" argument, Vim will not filter the returned completion
+candidates and the user supplied function should filter the candidates.
 
 The following example lists user names to a Finger command >
     :com -complete=custom,ListUsers -nargs=1 Finger !finger <args>
@@ -959,20 +1138,29 @@ The following example lists user names to a Finger command >
     :    return system("cut -d: -f1 /etc/passwd")
     :endfun
 
+The following example completes filenames from the directories specified in
+the 'path' option: >
+    :com -nargs=1 -bang -complete=customlist,EditFileComplete
+			\ EditFile edit<bang> <args>
+    :fun EditFileComplete(A,L,P)
+    :    return split(globpath(&path, a:ArgLead), "\n")
+    :endfun
+<
+
 Range handling						*E177* *E178*
 
-By default, user-defined commands do not accept a line number range. However,
+By default, user-defined commands do not accept a line number range.  However,
 it is possible to specify that the command does take a range (the -range
 attribute), or that it takes an arbitrary count value, either in the line
 number position (-range=N, like the |:split| command) or as a "count"
-argument (-count=N, like the |:Next| command). Possible attributes are:
+argument (-count=N, like the |:Next| command).  Possible attributes are:
 
 	-range	    Range allowed, default is current line
 	-range=%    Range allowed, default is whole file (1,$)
 	-range=N    A count (default N) which is specified in the line
 		    number position (like |:split|)
 	-count=N    A count (default N) which is specified either in the line
-		    number position, or as an initial argument (like |:Next|)
+		    number position, or as an initial argument (like |:Next|).
 		    Specifying -count (without a default) acts like -count=0
 
 Note that -range=N and -count=N are mutually exclusive - only one should be
@@ -997,9 +1185,9 @@ replacement text separately.
 Replacement text
 
 The replacement text for a user defined command is scanned for special escape
-sequences, using <...> notation. Escape sequences are replaced with values
-from the entered command line, and all other text is copied unchanged. The
-resulting string is executed as an Ex command. If the initial < of an escape
+sequences, using <...> notation.  Escape sequences are replaced with values
+from the entered command line, and all other text is copied unchanged.  The
+resulting string is executed as an Ex command.  If the initial < of an escape
 sequence is preceded by a backslash, the sequence is copied unchanged.
 
 The valid escape sequences are
@@ -1017,7 +1205,7 @@ The valid escape sequences are
 		expands to nothing.
 						*<reg>* *<register>*
 	<reg>	(See the '-register' attribute) The optional register,
-		if specified. Otherwise, expands to nothing. <register>
+		if specified.  Otherwise, expands to nothing.  <register>
 		is a synonym for this.
 						*<args>*
 	<args>	The command arguments, exactly as supplied (but as
@@ -1032,13 +1220,13 @@ The valid escape sequences are
 If the first two characters of an escape sequence are "q-" (for example,
 <q-args>) then the value is quoted in such a way as to make it a valid value
 for use in an expression.  This uses the argument as one single value.
+When there is no argument <q-args> is an empty string.
 
 To allow commands to pass their arguments on to a user-defined function, there
-is a special form <f-args> ("function args"). This splits the command
+is a special form <f-args> ("function args").  This splits the command
 arguments at spaces and Tabs, quotes each argument individually, and the
 <f-args> sequence is replaced by the comma-separated list of quoted arguments.
-See the Mycmd example below.  When there is no argument, <f-args> also has no
-argument.
+See the Mycmd example below.  If no arguments are given <f-args> is removed. 
 
 Examples >
 

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 7.0aa.  Last change: 2004 Dec 19
+*mbyte.txt*     For Vim version 7.0aa.  Last change: 2005 Oct 14
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.
@@ -286,6 +286,29 @@ Supported 'encoding' values are:			*encoding-values*
 1   koi8-u	Ukrainian
 1   macroman    MacRoman (Macintosh encoding)
 1   8bit-{name} any 8-bit encoding (Vim specific name)
+1   cp437	similar to iso-8859-1
+1   cp737	similar to iso-8859-7
+1   cp775	Baltic
+1   cp850	similar to iso-8859-4
+1   cp852	similar to iso-8859-1
+1   cp855	similar to iso-8859-2
+1   cp857	similar to iso-8859-5
+1   cp860	similar to iso-8859-9
+1   cp861	similar to iso-8859-1
+1   cp862	similar to iso-8859-1
+1   cp863	similar to iso-8859-8
+1   cp865	similar to iso-8859-1
+1   cp866	similar to iso-8859-5
+1   cp869	similar to iso-8859-7
+1   cp874	Thai
+1   cp1250	Czech, Polish, etc.
+1   cp1251	Cyrillic
+1   cp1253	Greek
+1   cp1254	Turkish
+1   cp1255	Hebrew
+1   cp1256	Arabic
+1   cp1257	Baltic
+1   cp1258	Vietnamese
 1   cp{number}	MS-Windows: any installed single-byte codepage
 2   cp932	Japanese (Windows only)
 2   euc-jp	Japanese (Unix only)
@@ -436,7 +459,7 @@ Useful utilities for converting the charset:
 	ftp://ftp.cuhk.hk/pub/chinese/ifcss/software/unix/convert/hc-30.tar.gz
 
     Korean:	    hmconv
-	Hmconv is Korean code conversion utility especially for E-mail. It can
+	Hmconv is Korean code conversion utility especially for E-mail.  It can
 	convert between EUC-KR and ISO-2022-KR.  Hmconv can be found at:
 	ftp://ftp.kaist.ac.kr/pub/hangul/code/hmconv/
 
@@ -444,7 +467,7 @@ Useful utilities for converting the charset:
 	Lv is a Powerful Multilingual File Viewer.  And it can be worked as
 	|charset| converter.  Supported |charset|: ISO-2022-CN, ISO-2022-JP,
 	ISO-2022-KR, EUC-CN, EUC-JP, EUC-KR, EUC-TW, UTF-7, UTF-8, ISO-8859
-	series, Shift_JIS, Big5 and HZ. Lv can be found at:
+	series, Shift_JIS, Big5 and HZ.  Lv can be found at:
 	http://www.ff.iij4u.or.jp/~nrt/freeware/lv4495.tar.gz
 
 
@@ -461,6 +484,12 @@ conversion needs to be done.  These conversions are supported:
 	request a very large buffer, more than Vim is willing to provide).
 	Try getting another iconv() implementation.
 
+							*iconv-dynamic*
+On MS-Windows Vim can be compiled with the |+iconv/dyn| feature.  This means
+Vim will search for the "iconv.dll" and "libiconv.dll" libraries.  When
+neither of them can be found Vim will still work but some conversions won't be
+possible.
+
 ==============================================================================
 4. Using a terminal					*mbyte-terminal*
 
@@ -506,7 +535,7 @@ Now start xterm with >
 or, for bigger character: >
   xterm -u8 -fn -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1
 
-and you will have a working UTF-8 terminal emulator. Try both >
+and you will have a working UTF-8 terminal emulator.  Try both >
 
    cat utf-8-demo.txt
    vim utf-8-demo.txt
@@ -761,7 +790,7 @@ is suitable for complex input, such as CJK.
   number of Hira-gana characters are 76.  So, first, we pre-input text as
   pronounced in Hira-gana, second, we convert Hira-gana to Kanji or Kata-Kana,
   if needed.  There are some Kana-Kanji conversion server: jserver
-  (distributed with Wnn, see below) and canna. Canna could be found at:
+  (distributed with Wnn, see below) and canna.  Canna could be found at:
   ftp://ftp.nec.co.jp/pub/Canna/ (no longer works).
 
 There is a good input system: Wnn4.2.  Wnn 4.2 contains,
@@ -801,7 +830,7 @@ Use the RPM or port for your system.
     Preedit Area and Status Area are performed by the client application in
     the area of application.  The client application is directed by the
     |IM-server| to display all pre-edit data at the location of text
-    insertion. The client registers callbacks invoked by the input method
+    insertion.  The client registers callbacks invoked by the input method
     during pre-editing.
 *.  over-the-spot					*OverTheSpot*
     Status Area is created in a fixed position within the area of application,
@@ -1231,7 +1260,7 @@ is no longer relevant in the GTK+ 2 GUI.
 Up to two combining characters can be used.  The combining character is drawn
 on top of the preceding character.  When editing text a composing character is
 mostly considered part of the preceding character.  For example "x" will
-delete a character and its following composing characters by default. If the
+delete a character and its following composing characters by default.  If the
 'delcombine' option is on, then pressing 'x' will delete the combining
 characters, one at a time, then the base character.  But when inserting, you
 type the first character and the following composing characters separately,
@@ -1253,7 +1282,7 @@ characters present in the selected font.
 
 Useful commands:
 - "ga" shows the decimal, hexadecimal and octal value of the character under
-  the cursor.  If there are composing characters these are shown too. (if the
+  the cursor.  If there are composing characters these are shown too.  (If the
   message is truncated, use ":messages").
 - "g8" shows the bytes used in a UTF-8 character, also the composing
   characters, as hex numbers.
@@ -1319,7 +1348,7 @@ a zero if necessary.
 COMMAND ARGUMENTS					*utf-8-char-arg*
 
 Commands like |f|, |F|, |t| and |r| take an argument of one character.  For
-UTF-8 this argument may include one or two composing characters.  These needs
+UTF-8 this argument may include one or two composing characters.  These need
 to be produced together with the base character, Vim doesn't wait for the next
 character to be typed to find out if it is a composing character or not.
 Using 'keymap' or |:lmap| is a nice way to type these characters.

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 7.0aa.  Last change: 2005 Jan 08
+*message.txt*   For Vim version 7.0aa.  Last change: 2006 Mar 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -19,7 +19,16 @@ The ":messages" command can be used to view previously given messages.  This
 is especially useful when messages have been overwritten or truncated.  This
 depends on the 'shortmess' option.
 
-The number of remembered messages is fixed at 20.
+The number of remembered messages is fixed at 20 for the tiny version and 100
+for other versions.
+
+								*g<*
+The "g<" command can be used to see the last page of previous command output.
+This is especially useful if you accidentally typed <Space> at the hit-enter
+prompt.
+Note: when you stopped the output with "q" at the more prompt only up to that
+point will be displayed.
+The previous command output is cleared when another command produces output.
 
 If you are using translated messages, the first printed line tells who
 maintains the messages or the translations.  You can use this to contact the
@@ -279,6 +288,19 @@ Example: >
 changes to: >
 	:w! /tmp/test
 <
+							*E768*  >
+  Swap file exists: {filename} (:silent! overrides)
+
+You are protected from overwriting a file that is being edited by Vim.  This
+happens when you use ":w! filename" and a swapfile is found.
+- If the swapfile was left over from an old crashed edit session you may want
+  to delete the swapfile.  Edit {filename} to find out information about the
+  swapfile.
+- If you want to write anyway prepend ":silent!" to the command.  For example: >
+  	:silent! w! /tmp/test
+< The special command is needed, since you already added the ! for overwriting
+  an existing file.
+
 							*E139*  >
   File is loaded in another buffer
 
@@ -364,7 +386,8 @@ cannot be written.  You need to give the buffer a file name: >
 
 When using the '~' character in a pattern, it is replaced with the previously
 used pattern in a ":substitute" command.  This fails when no such command has
-been used yet.  See |/~|.
+been used yet.  See |/~|.  This also happens when using ":s/pat/%/", where the
+"%" stands for the previous substitute string.
 
 							*E35*  >
   No previous regular expression
@@ -567,6 +590,7 @@ The file is read-only and you are making a change to it anyway.  You can use
 the |FileChangedRO| autocommand event to avoid this message (the autocommand
 must reset the 'readonly' option).  See 'modifiable' to completely disallow
 making changes to a file.
+This message is only given for the first change after 'readonly' has been set.
 
 							*W13*  >
   Warning: File "{filename}" has been created after editing started
@@ -713,9 +737,10 @@ a user-defined command.
 
 This is an (incomplete) overview of various messages that Vim gives:
 
-		*hit-enter* *press-enter* *hit-return* *press-return*  >
+			*hit-enter* *press-enter* *hit-return*
+			*press-return* *hit-enter-prompt*
 
-  Hit ENTER or type command to continue
+  Press ENTER or type command to continue
 
 This message is given when there is something on the screen for you to read,
 and the screen is about to be redrawn:
@@ -723,10 +748,16 @@ and the screen is about to be redrawn:
 - Something is displayed on the status line that is longer than the width of
   the window, or runs into the 'showcmd' or 'ruler' output.
 
--> Hit <Enter> or <Space> to redraw the screen and continue, without that key
-   being used otherwise.
--> Hit ":" or any other Normal mode command character to start that command.
--> Hit <C-Y> to copy (yank) a modeless selection to the clipboard register.
+-> Press <Enter> or <Space> to redraw the screen and continue, without that
+   key being used otherwise.
+-> Press ':' or any other Normal mode command character to start that command.
+-> Press 'k', <Up>, 'u', 'b' or 'g' to scroll back in the messages.  This
+   works the same way as at the |more-prompt|.  Only works when 'compatible'
+   is off and 'more' is on.
+-> Pressing 'j', 'd' or <Down> is ignored when messages scrolled off the top
+   of the screen, 'compatible' is off and 'more' is on, to avoid that typing
+   one 'j' too many causes the messages to disappear.
+-> Press <C-Y> to copy (yank) a modeless selection to the clipboard register.
 -> Use a menu.  The characters defined for Cmdline-mode are used.
 -> When 'mouse' contains the 'r' flag, clicking the left mouse button works
    like pressing <Space>.  This makes it impossible to select text though.
@@ -734,19 +765,24 @@ and the screen is about to be redrawn:
    pressing <Space>.
 {Vi: only ":" commands are interpreted}
 
+If you accidentally hit <Enter> or <Space> and you want to see the displayed
+text then use |g<|.  This only works when 'more' is set.
+
 To reduce the number of hit-enter prompts:
 - Set 'cmdheight' to 2 or higher.
 - Add flags to 'shortmess'.
 - Reset 'showcmd' and/or 'ruler'.
 
+If your script causes the hit-enter prompt and you don't know why, you may
+find the |v:scrollstart| variable useful.
+
 Also see 'mouse'.  The hit-enter message is highlighted with the |hl-Question|
 group.
 
 
 						*more-prompt* *pager*  >
   -- More --
-  -- More -- (RET: line, SPACE: page, d: half page, q: quit)
-  -- More -- (RET/BS: line, SPACE/b: page, d/u: half page, q: quit)
+  -- More -- SPACE/d/j: screen/page/line down, b/u/k: up, q: quit
 
 This message is given when the screen is filled with messages.  It is only
 given when the 'more' option is on.  It is highlighted with the |hl-MoreMsg|
@@ -754,11 +790,16 @@ group.
 
 Type					effect ~
      <CR> or <NL> or j or <Down>	one more line
+     d					down a page (half a screen)
+     <Space> or <PageDown>		down a screen
+     G					down all the way, until the hit-enter
+     					prompt
+
      <BS> or k or <Up>			one line back (*)
-     <Space> or <PageDown>		next page
-     b or <PageUp>			previous page (*)
-     d					down half a page
-     u					up half a page (*)
+     u					up a page (half a screen) (*)
+     b or <PageUp>			back a screen (*)
+     g					back to the start (*)
+
      q, <Esc> or CTRL-C			stop the listing
      :					stop the listing and enter a
 					     command-line
@@ -770,8 +811,8 @@ Type					effect ~
 
 Any other key causes the meaning of the keys to be displayed.
 
-(*) backwards scrolling is only supported for these commands: >
-    :clist
+(*)  backwards scrolling is {not in Vi}.  Only scrolls back to where messages
+     started to scroll.
 (**) Clicking the left mouse button only works:
      - For the GUI: in the last line of the screen.
      - When 'r' is included in 'mouse' (but then selecting text won't work).
@@ -780,4 +821,8 @@ Any other key causes the meaning of the keys to be displayed.
 Note: The typed key is directly obtained from the terminal, it is not mapped
 and typeahead is ignored.
 
+The |g<| command can be used to see the last page of previous command output.
+This is especially useful if you accidentally typed <Space> at the hit-enter
+prompt.
+
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 7.0aa.  Last change: 2005 Jan 08
+*motion.txt*    For Vim version 7.0aa.  Last change: 2006 Jan 02
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -57,6 +57,7 @@ or change text.  The following operators are available:
 	|>|	>	shift right
 	|<|	<	shift left
 	|zf|	zf	define a fold
+	|g@|    g@      call function set with the 'operatorfunc' option
 
 If the motion includes a count and the operator also had a count before it,
 the two counts are multiplied.  For example: "2d3w" deletes six words.
@@ -72,13 +73,13 @@ and end position.  Generally, motions that move between lines affect lines
 characterwise).  However, there are some exceptions.
 
 						*exclusive* *inclusive*
-A character motion is either inclusive or exclusive. When inclusive, the start
-and end position of the motion are included in the operation.  When exclusive,
-the last character towards the end of the buffer is not included.  Linewise
-motions always include the start and end position.
+A character motion is either inclusive or exclusive.  When inclusive, the
+start and end position of the motion are included in the operation.  When
+exclusive, the last character towards the end of the buffer is not included.
+Linewise motions always include the start and end position.
 
-Which motions are linewise, inclusive or exclusive is mentioned below.  There
-are however, two general exceptions:
+Which motions are linewise, inclusive or exclusive is mentioned with the
+command.  There are however, two general exceptions:
 1. If the motion is exclusive and the end of the motion is in column 1, the
    end of the motion is moved to the end of the previous line and the motion
    becomes inclusive.  Example: "}" moves to the first line after a paragraph,
@@ -247,7 +248,7 @@ f{char}			To [count]'th occurrence of {char} to the right.  The
 
 							*F*
 F{char}			To the [count]'th occurrence of {char} to the left.
-			The cursor is placed on {char} |inclusive|.
+			The cursor is placed on {char} |exclusive|.
 			{char} can be entered like with the |f| command.
 
 							*t*
@@ -259,7 +260,7 @@ t{char}			Till before [count]'th occurrence of {char} to the
 							*T*
 T{char}			Till after [count]'th occurrence of {char} to the
 			left.  The cursor is placed on the character right of
-			{char} |inclusive|.
+			{char} |exclusive|.
 			{char} can be entered like with the |f| command.
 
 							*;*
@@ -350,6 +351,10 @@ or the last line.  The first two commands put the cursor in the same column
 except after the "$" command, then the cursor will be put on the last
 character of the line.
 
+If "k", "-" or CTRL-P is used with a [count] and there are less than [count]
+lines above the cursor and the 'cpo' option includes the "-" flag it is an
+error. |cpo--|.
+
 ==============================================================================
 4. Word motions						*word-motions*
 
@@ -381,10 +386,11 @@ These commands move over words or WORDS.
 							*word*
 A word consists of a sequence of letters, digits and underscores, or a
 sequence of other non-blank characters, separated with white space (spaces,
-tabs, <EOL>).  This can be changed with the 'iskeyword' option.
+tabs, <EOL>).  This can be changed with the 'iskeyword' option.  An empty line
+is also considered to be a word.
 							*WORD*
 A WORD consists of a sequence of non-blank characters, separated with white
-space.  An empty line is also considered to be a word and a WORD.
+space.  An empty line is also considered to be a WORD.
 
 A sequence of folded lines is counted for one word of a single character.
 "w" and "W", "e" and "E" move to the start/end of the first word or WORD after
@@ -461,9 +467,12 @@ A paragraph begins after each empty line, and also at each of a set of
 paragraph macros, specified by the pairs of characters in the 'paragraphs'
 option.  The default is "IPLPPPQPP LIpplpipbp", which corresponds to the
 macros ".IP", ".LP", etc.  (These are nroff macros, so the dot must be in the
-first column).  A section boundary is also a paragraph boundary.  Note that
-this does not include a '{' or '}' in the first column.  Also note that a
-blank line (only containing white space) is NOT a paragraph boundary.
+first column).  A section boundary is also a paragraph boundary.
+Note that a blank line (only containing white space) is NOT a paragraph
+boundary.
+Also note that this does not include a '{' or '}' in the first column.  When
+the '{' flag is in 'cpoptions' then '{' in the first column is used as a
+paragraph boundary |posix|.
 
 							*section*
 A section begins after a form-feed (<C-L>) in the first column and at each of
@@ -588,6 +597,20 @@ i<			"inner <> block", select [count] <> blocks, from
 			'>', excluding the '<' and '>'.
 			When used in Visual mode it is made characterwise.
 
+						*v_at* *at*
+at			"a tag block", select [count] tag blocks, from the
+			[count]'th unmatched "<aaa>" backwards to the matching
+			"</aaa>", including the "<aaa>" and "</aaa>".
+			See |tag-blocks| about the details.
+			When used in Visual mode it is made characterwise.
+
+						*v_it* *it*
+it			"inner tag block", select [count] tag blocks, from the
+			[count]'th unmatched "<aaa>" backwards to the matching
+			"</aaa>", excluding the "<aaa>" and "</aaa>".
+			See |tag-blocks| about the details.
+			When used in Visual mode it is made characterwise.
+
 a}							*v_a}* *a}* *a{*
 a{							*v_aB* *v_a{* *aB*
 aB			"a Block", select [count] Blocks, from "[count] [{" to
@@ -621,6 +644,8 @@ i'							*v_i'* *i'*
 i`							*v_i`* *i`*
 			Like a", a' and a`, but exclude the quotes and
 			repeating won't extend the Visual selection.
+			Special case: With a count of 2 the quotes are
+			included, but no extra white space as with a"/a'/a`.
 
 When used after an operator:
 For non-block objects:
@@ -672,6 +697,25 @@ where on the object the cursor is.  For example, compare "dw" and "daw": "dw"
 deletes from the cursor position to the start of the next word, "daw" deletes
 the word under the cursor and the space after or before it.
 
+
+Tag blocks						*tag-blocks*
+
+For the "it" and "at" text objects an attempt is done to select blocks between
+matching tags for HTML and XML.  But since these are not completely compatible
+there are a few restrictions.
+
+The normal method is to select a <tag> until the matching </tag>.  For "at"
+the tags are included, for "it" they are excluded.  But when "it" is repeated
+the tags will be included (otherwise nothing would change).
+
+"<aaa/>" items are skipped.  Case is ignored, also for XML where case does
+matter.
+
+In HTML it is possible to have a tag like <br> or <meta ...> without a
+matching end tag.  These are ignored.
+
+The text objects are tolerant about mistakes.  Stray end tags are ignored.
+
 ==============================================================================
 7. Marks					*mark-motions* *E20* *E78*
 
@@ -931,7 +975,7 @@ These commands are not marks themselves, but jump to a mark:
 			position.  E.g., when updating a "Last change"
 			timestamp in the first line: >
 
-				:let lnum = getline(".")
+				:let lnum = line(".")
 				:keepjumps normal gg
 				:call SetLastChange()
 				:keepjumps exe "normal " . lnum . "G"
@@ -1054,7 +1098,7 @@ g;			Go to [count] older position in change list.
 
 							*g,* *E663*
 g,			Go to [count] newer cursor position in change list.
-			Just like "g;| but in the opposite direction.
+			Just like |g;| but in the opposite direction.
 			(not a motion command)
 			{not in Vi}
 			{not available without the +jumplist feature}

runtime/doc/netbeans.txt

@@ -1,4 +1,4 @@
-*netbeans.txt*  For Vim version 7.0aa.  Last change: 2004 Jun 16
+*netbeans.txt*  For Vim version 7.0aa.  Last change: 2006 Feb 05
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -16,7 +16,8 @@ NetBeans ExternalEditor Integration Features		*netbeans*
 8.  Messages					|netbeans-messages|
 9.  Running Vim from NetBeans			|netbeans-run|
 10. NetBeans protocol				|netbeans-protocol|
-11. Known problems				|netbeans-problems|
+11. NetBeans commands				|netbeans-commands|
+12. Known problems				|netbeans-problems|
 
 {Vi does not have any of these features}
 {only available when compiled with the |+netbeans_intg| feature}
@@ -37,7 +38,7 @@ Visit http://www.sun.com for more information regarding the Sun ONE Studio
 product line.
 
 Current releases of NetBeans provide full support for Java and limited support
-for C, C++, and Fortran. Current releases of Sun ONE Studio provide full
+for C, C++, and Fortran.  Current releases of Sun ONE Studio provide full
 support for Java, C, C++, and Fortran.
 
 The interface to NetBeans is also supported by Agide, the A-A-P GUI IDE.
@@ -49,12 +50,12 @@ See the A-A-P website for information: http://www.A-A-P.org.
 ==============================================================================
 2. NetBeans Key Bindings				*netbeans-keybindings*
 
-Vim understands a number of key bindings that execute NetBeans commands. These
-are typically all the Function key combinations. To execute a NetBeans command,
-the user must press the Pause key followed by a NetBeans key binding. For
-example, in order to compile a Java file, the NetBeans key binding is "F9". So,
-while in vim, press "Pause F9" to compile a java file. To toggle a breakpoint
-at the current line, press "Pause Shift F8".
+Vim understands a number of key bindings that execute NetBeans commands.
+These are typically all the Function key combinations.  To execute a NetBeans
+command, the user must press the Pause key followed by a NetBeans key binding.
+For example, in order to compile a Java file, the NetBeans key binding is
+"F9".  So, while in vim, press "Pause F9" to compile a java file.  To toggle a
+breakpoint at the current line, press "Pause Shift F8".
 
 The Pause key is Function key 21.  If you don't have a working Pause key and
 want to use F8 instead, use: >
@@ -80,10 +81,10 @@ In case you do not want the NetBeans interface you can disable it by
 uncommenting a line with "--disable-netbeans" in the Makefile.
 
 Currently, only gvim is supported in this integration as NetBeans does not
-have means to supply a terminal emulator for the vim command. Furthermore,
+have means to supply a terminal emulator for the vim command.  Furthermore,
 there is only GUI support for GTK, GNOME, and Motif.
 
-If Motif support is required the user must supply XPM libraries. See
+If Motif support is required the user must supply XPM libraries.  See
 |workshop-xpm| for details on obtaining the latest version of XPM.
 
 
@@ -98,45 +99,45 @@ XPM by yourself or use precompiled libraries from http://iamphet.nm.ru/misc/
 ==============================================================================
 4. Downloading NetBeans					*netbeans-download*
 
-The NetBeans IDE is available for download from netbeans.org. You can download
+The NetBeans IDE is available for download from netbeans.org.  You can download
 a released version, download sources, or use CVS to download the current
-source tree. If you choose to download sources, follow directions from
+source tree.  If you choose to download sources, follow directions from
 netbeans.org on building NetBeans.
 
 Depending on the version of NetBeans you download, you may need to do further
-work to get the required External Editor module. This is the module which lets
-NetBeans work with gvim (or xemacs :-). See http://externaleditor.netbeans.org
+work to get the required External Editor module.  This is the module which lets
+NetBeans work with gvim (or xemacs :-).  See http://externaleditor.netbeans.org
 for details on downloading this module if your NetBeans release does not have
 it.
 
-For C, C++, and Fortran support you will also need the cpp module. See
+For C, C++, and Fortran support you will also need the cpp module.  See
 http://cpp.netbeans.org for information regarding this module.
 
 You can also download Sun ONE Studio from Sun Microsystems, Inc for a 30 day
-free trial. See http://www.sun.com for further details.
+free trial.  See http://www.sun.com for further details.
 
 ==============================================================================
 5. Preparing NetBeans for Vim				*netbeans-preparation*
 
 In order for NetBeans to work with vim, the NetBeans External Editor module
-must be loaded and enabled. If you have a Sun ONE Studio Enterprise Edition
-then this module should be loaded and enabled. If you have a NetBeans release
+must be loaded and enabled.  If you have a Sun ONE Studio Enterprise Edition
+then this module should be loaded and enabled.  If you have a NetBeans release
 you may need to find another way of obtaining this open source module.
 
 You can check if you have this module by opening the Tools->Options dialog
 and drilling down to the "Modules" list (IDE Configuration->System->Modules).
 If your Modules list has an entry for "External Editor" you must make sure
-it is enabled (the "Enabled" property should have the value "True"). If your
+it is enabled (the "Enabled" property should have the value "True").  If your
 Modules list has no External Editor see the next section on |obtaining-exted|.
 
 ==============================================================================
 6. Obtaining the External Editor Module			    *obtaining-exted*
 
-There are 2 ways of obtaining the External Editor module. The easiest way
+There are 2 ways of obtaining the External Editor module.  The easiest way
 is to use the NetBeans Update Center to download and install the module.
 Unfortunately, some versions do not have this module in their update
-center. If you cannot download via the update center you will need to
-download sources and build the module. I will try and get the module
+center.  If you cannot download via the update center you will need to
+download sources and build the module.  I will try and get the module
 available from the NetBeans Update Center so building will be unnecessary.
 Also check http://externaleditor.netbeans.org for other availability options.
 
@@ -151,22 +152,22 @@ Assuming you have loaded and enabled the NetBeans External Editor module
 as described in |netbeans-preparation| all you need to do is verify that
 the gvim command line is properly configured for your environment.
 
-Open the Tools->Options dialog and open the Editing category. Select the
-External Editor. The right hand pane should contain a Properties tab and
-an Expert tab. In the Properties tab make sure the "Editor Type" is set
-to "Vim". In the Expert tab make sure the "Vim Command" is correct.
+Open the Tools->Options dialog and open the Editing category.  Select the
+External Editor.  The right hand pane should contain a Properties tab and
+an Expert tab.  In the Properties tab make sure the "Editor Type" is set
+to "Vim".  In the Expert tab make sure the "Vim Command" is correct.
 
-You should be careful if you change the "Vim Command". There are command
+You should be careful if you change the "Vim Command".  There are command
 line options there which must be there for the connection to be properly
-set up. You can change the command name but thats about it. If your gvim
-can be found by your $PATH then the VIM Command can start with "gvim". If
+set up.  You can change the command name but that's about it.  If your gvim
+can be found by your $PATH then the VIM Command can start with "gvim".  If
 you don't want gvim searched from your $PATH then hard code in the full
-Unix path name. At this point you should get a gvim for any source file
+Unix path name.  At this point you should get a gvim for any source file
 you open in NetBeans.
 
 If some files come up in gvim and others (with different file suffixes) come
 up in the default NetBeans editor you should verify the MIME type in the
-Expert tab MIME Type property. NetBeans is MIME oriented and the External
+Expert tab MIME Type property.  NetBeans is MIME oriented and the External
 Editor will only open MIME types specified in this property.
 
 ==============================================================================
@@ -178,6 +179,7 @@ These messages are specific for NetBeans:
 Region is guarded, cannot modify
 		NetBeans defines guarded areas in the text, which you cannot
 		change.
+		Also sets the current buffer, if necessary.
 
 							*E656*
 NetBeans disallows writes of unmodified buffers
@@ -193,10 +195,18 @@ Partial writes disallowed for NetBeans buffers
 NetBeans connection lost for this buffer
 		NetBeans has become confused about the state of this file.
 		Rather than risc data corruption, NetBeans has severed the
-		connection for this file. Vim will take over responsibility
+		connection for this file.  Vim will take over responsibility
 		for saving changes to this file and NetBeans will no longer
 		know of these changes.
 
+							*E744*
+NetBeans does not allow changes in read-only files
+		Vim normally allows changes to a read-only file and only
+		enforces the read-only rule if you try to write the file.
+		However, NetBeans does not let you make changes to a file
+		which is read-only and becomes confused if vim does this.
+		So vim does not allow modifications to files when run with
+		NetBeans.
 ==============================================================================
 9. Running Vim from NetBeans				*netbeans-run*
 
@@ -239,13 +249,13 @@ NetBeans (see http://externaleditor.netbeans.org).  Later it was extended to
 work with Agide (A-A-P GUI IDE, see http://www.a-a-p.org).  The extensions are
 marked with "version 2.1".
 
-Version 2.2 of the protocol has several minor changes which should only
-affect NetBeans users (ie, not Agide users). However, a bug was fixed which
-could cause confusion. The netbeans_saved() function sent a "save" protocol
-command. In protocol version 2.1 and earlier this was incorrectly interpreted
-as a notification that a write had taken place. In reality, it told NetBeans
-to save the file so multiple writes were being done. This caused various
-problems and has been fixed in 2.2. To decrease the likelihood of this
+Version 2.2 of the protocol has several minor changes which should only affect
+NetBeans users (ie, not Agide users).  However, a bug was fixed which could
+cause confusion.  The netbeans_saved() function sent a "save" protocol
+command.  In protocol version 2.1 and earlier this was incorrectly interpreted
+as a notification that a write had taken place.  In reality, it told NetBeans
+to save the file so multiple writes were being done.  This caused various
+problems and has been fixed in 2.2.  To decrease the likelihood of this
 confusion happening again, netbeans_saved() has been renamed to
 netbeans_save_buffer().
 
@@ -419,7 +429,7 @@ initDone	Mark the buffer as ready for use.  Implicitly makes the buffer
 
 insertDone
 		Sent by NetBeans to tell vim an initial file insert is done.
-		This triggers a read message being printed. Prior to version
+		This triggers a read message being printed.  Prior to version
 		2.3, no read messages were displayed after opening a file.
 		New in version 2.3.
 
@@ -457,8 +467,8 @@ save		Save the buffer when it was modified.  The other side of the
 		New in version 2.2.
 
 saveDone
-		Sent by NetBeans to tell vim a save is done. This triggers
-		a save message being printed. Prior to version 2.3, no save
+		Sent by NetBeans to tell vim a save is done.  This triggers
+		a save message being printed.  Prior to version 2.3, no save
 		messages were displayed after a save.
 		New in version 2.3.
 
@@ -476,8 +486,10 @@ setContentType
 		Not implemented.
 
 setDot off	Make the buffer the current buffer and set the cursor at the
-		specified position.  If there are folds they are opened to
-		make the cursor line visible.
+		specified position.  If the buffer is open in another window
+		than make that window the current window.
+		If there are folds they are opened to make the cursor line
+		visible.
 		In version 2.1 "lnum/col" can be used instead of "off".
 
 setExitDelay seconds
@@ -530,7 +542,7 @@ showBalloon text
 
 specialKeys
 		Map a set of keys (mostly function keys) to be passed back
-		to NetBeans for processing. This lets NetBeans hotkeys be
+		to NetBeans for processing.  This lets NetBeans hotkeys be
 		used from vim.
 		Implemented in version 2.3.
 
@@ -551,9 +563,13 @@ stopCaretListen
 stopDocumentListen
 		Mark the buffer to stop reporting changes to the IDE.
 		Opposite of startDocumentListen.
+		NOTE: if "netbeansBuffer" was used to mark this buffer as a
+		NetBeans buffer, then the buffer is deleted in Vim.  This is
+		for compatibility with Sun Studio 10.
 
 unguard off len
 		Opposite of "guard", remove guarding for a text area.
+		Also sets the current buffer, if necessary.
 
 version		Not implemented.
 
@@ -600,6 +616,7 @@ insert off text
 			123		no problem
 			123 !message	failed
 		Note that the message in the reply is not quoted.
+		Also sets the current buffer, if necessary.
 
 remove off length
 		Delete "length" bytes of text at position "off".  Both
@@ -608,6 +625,7 @@ remove off length
 			123		no problem
 			123 !message	failed
 		Note that the message in the reply is not quoted.
+		Also sets the current buffer, if necessary.
 
 saveAndExit	Perform the equivalent of closing Vim: ":confirm qall".
 		If there are no changed files or the user does not cancel the
@@ -640,7 +658,7 @@ buttonRelease button lnum col
 		at the time of the release.  Only for buffers that are owned
 		by NetBeans.  This event is not sent if the button was
 		released while the mouse was in the status line or in a
-		separator line. If col is less than 1 the button release was
+		separator line.  If col is less than 1 the button release was
 		in the sign area.
 		New in version 2.2.
 
@@ -755,7 +773,18 @@ DETACH		IDE -> editor: break the connection without exiting the
 REJECT		Not used.
 
 ==============================================================================
-11. Known problems					*netbeans-problems*
+11. NetBeans Commands					*netbeans-commands*
+
+							*:nbkey*
+:nbkey key			Pass the key to NetBeans for processing
+
+Pass the key to NetBeans for hot-key processing.  You should not need to use
+this command directly.  However, NetBeans passes a list of hot-keys to Vim at
+startup and when one of these keys is pressed, this command is generated to
+send the key press back to NetBeans.
+
+==============================================================================
+12. Known problems					*netbeans-problems*
 
 NUL bytes are not possible.  For editor -> IDE they will appear as NL
 characters.  For IDE -> editor they cannot be inserted.

runtime/doc/os_390.txt

@@ -1,4 +1,4 @@
-*os_390.txt*    For Vim version 7.0aa.  Last change: 2003 Jun 03
+*os_390.txt*    For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL	  by Ralf Schandl
@@ -12,17 +12,17 @@ This file contains the particulars for the z/OS UNIX version of Vim.
 4. ASCII/EBCDIC dependent scripts	|zOS-has-ebcdic|
 5. XTerm Problems			|zOS-xterm|
 6. Motif Problems			|zOS-Motif|
-7  Bugs					|zOS-Bugs|
+7. Bugs					|zOS-Bugs|
 8. Known weaknesses			|zOS-weaknesses|
 9. Changes				|zOS-changes|
 
 DISCLAIMER: ~
-We are IBM employees, but IBM is not responsible for this port. This is our
+We are IBM employees, but IBM is not responsible for this port.  This is our
 private fun, and is provided in the hopes that it may be useful to others.
 
 Please note that this software has NOT been submitted to any formal IBM
-testing and is published AS IS. Please do not contact IBM for support for this
-software, as it is not an official component of any IBM product. IT IS NOT
+testing and is published AS IS.  Please do not contact IBM for support for this
+software, as it is not an official component of any IBM product.  IT IS NOT
 SUPPORTED, GUARANTEED, OR RELATED WHATSOEVER TO IBM.
 
 Contributors: ~
@@ -60,22 +60,22 @@ Vim should compile, link, and run right out of the box on a standard IBM z/OS
 UNIX mainframe.  I've personally run it on z/OS V1R2 and V1R3 machines without
 problems.
 
-Many changes had to be done to the code to port Vim to z/OS UNIX. As like
-most UNIX programs, Vim contained heavy ASCII dependencies. I might have
+Many changes had to be done to the code to port Vim to z/OS UNIX.  As like
+most UNIX programs, Vim contained heavy ASCII dependencies.  I might have
 missed an ASCII dependency, or it is possible that a new one has been added
-with a feature or bug fix. Most programmers are simply not aware of possible
-ASCII/EBCDIC conversion issues. If you hit a problem that seems related to
+with a feature or bug fix.  Most programmers are simply not aware of possible
+ASCII/EBCDIC conversion issues.  If you hit a problem that seems related to
 this, feel free to contact us at the email addresses above.
 
 One indication of ASCII/EBCDIC conversion problems is screen corruption with
 "unprintable" characters.  For example, at one point the errorbell was broken
-in Vim. Any time Vim tried to ring the terminal bell an ASCII character 0x07
-would be printed. This works fine on most terminals, but is broken on an
-EBCDIC one. The correct solution was to define a different value for the bell
+in Vim.  Any time Vim tried to ring the terminal bell an ASCII character 0x07
+would be printed.  This works fine on most terminals, but is broken on an
+EBCDIC one.  The correct solution was to define a different value for the bell
 character on EBCDIC systems.
 
 Remember, it's only possible to fix a bug if the community knows about it.
-Don't rely on someone else to report it! See the section |bug-reports|.
+Don't rely on someone else to report it!  See the section |bug-reports|.
 
 ==============================================================================
 3. Building VIM for z/OS UNIX		*OS390-building* *zOS-building*
@@ -83,12 +83,12 @@ Don't rely on someone else to report it! See the section |bug-reports|.
 A word on debugging code first: ~
 
 The normal run of configure adds the flag '-g' to the compiler options,
-to include debugging information into the executable. This information
+to include debugging information into the executable.  This information
 are normally removed from the executable with the strip command during
-installation. On z/OS UNIX, it is not possible to remove this from
-the executable. The strip command exists on z/OS UNIX and is called
+installation.  On z/OS UNIX, it is not possible to remove this from
+the executable.  The strip command exists on z/OS UNIX and is called
 during the installation, but it does nothing.  It is equivalent to the
-'touch' command. This is due to the way debug symbols are stored in the
+'touch' command.  This is due to the way debug symbols are stored in the
 objects generated by the compiler.
 
 If you want to build Vim without debugging code, export the environment
@@ -99,11 +99,11 @@ variable CFLAGS set to an empty string before you call the configure script.
 
 Building without X11: ~
 
-Note: Use cc to build Vim. The c89 compiler has stricter syntax checking
+Note: Use cc to build Vim.  The c89 compiler has stricter syntax checking
 and will not compile Vim cleanly.
 
 If you build VIM without X11 support, compiling and building is
-straightforward. Don't forget to export _CC_CCMODE=1 before calling
+straightforward.  Don't forget to export _CC_CCMODE=1 before calling
 configure and make.
 >
     $ export _CC_CCMODE=1
@@ -114,7 +114,7 @@ configure and make.
 	Test notes:
 	Test 11 will fail if you do not have gzip installed.
 	Test 42 will fail, as VIM on z/OS UNIX doesn't support the multibyte
-	feature. (David Moore: "Doesn't work _yet_!  :-)  I'll see what I
+	feature.  (David Moore: "Doesn't work _yet_!  :-)  I'll see what I
 	can do.")
 >
 
@@ -123,8 +123,8 @@ configure and make.
 
 Building with X11: ~
 
-There are two ways for building Vim with X11 support. You can link it
-statically with the X11 libraries or can bind it with the X11 DLLs. The
+There are two ways for building Vim with X11 support.  You can link it
+statically with the X11 libraries or can bind it with the X11 DLLs.  The
 statically linked version results in a huge executable (~13MB), while the
 dynamically linked executable is much smaller (~4.5MB).
 
@@ -137,7 +137,7 @@ Here is what you do, if you want Motif:
      VIM is now linked statically with the X11 libraries.
 
   b) Dynamic link:
-     Make VIM as described for the static link. Then change the contents of
+     Make VIM as described for the static link.  Then change the contents of
      the 'auto/link.sed' file by appending: >
 	s%-lXm  *%/usr/lib/Xm.x %g
 	s%-lX11  *%/usr/lib/X11.x %g
@@ -155,7 +155,7 @@ See the Makefile and the file link.sh on how link.sed is used.
 ==============================================================================
 4. ASCII/EBCDIC dependent scripts	*OS390-has-ebcdic* *zOS-has-ebcdic*
 
-For the internal script language the feature "ebcdic" was added. With this
+For the internal script language the feature "ebcdic" was added.  With this
 you can fix ASCII dependent scripts like this:
 >
     if has("ebcdic")
@@ -178,7 +178,7 @@ the screen with <C-L> or if you can't move to the left with the cursor key on
 the command line, try adding >
 	:set t_le=^H
 <
-to your .vimrc. Note: '^H' is one character, hit <C-V><C-H> to get it.
+to your .vimrc.  Note: '^H' is one character, hit <C-V><C-H> to get it.
 
 ==============================================================================
 6. Motif Problems			*OS390-Motif* *zOS-Motif*
@@ -203,9 +203,9 @@ There is no solution for this as of yet.
 8. Known weaknesses			*OS390-weaknesses* *zOS-weaknesses*
 
 - No binary search in tag files.
-  The program /bin/sort sorts by ASCII value by default. This program is
-  normally used by ctags to sort the tags. There might be a version of
-  ctags out there, that does it right, but we can't be sure. So this seems to
+  The program /bin/sort sorts by ASCII value by default.  This program is
+  normally used by ctags to sort the tags.  There might be a version of
+  ctags out there, that does it right, but we can't be sure.  So this seems to
   be a permanent restriction.
 
 - Multibyte support (utf-8) doesn't work, it's disabled at compile time.
@@ -246,10 +246,10 @@ not an exhaustive summary of all the modifications made to the code base.
   screen corruption problems in gVim reported by Anthony Giorgio.
 
   Anthony Giorgio updated this document:
-	- Changed OS/390 to z/OS where appropriate. IBM decided to rename
+	- Changed OS/390 to z/OS where appropriate.  IBM decided to rename
 		all of its servers and operating systems.  z/OS and OS/390
 		are the same product, but the version numbering system was
-		reset for the name change. (e.g. OS/390 V2R11 == z/OS V1R1)
+		reset for the name change (e.g. OS/390 V2R11 == z/OS V1R1).
 	- Added information about second edition of the Open Source Redbook.
 	- Moved Redbook information to a separate section.
 	- Various tweaks and changes.
@@ -265,16 +265,16 @@ not an exhaustive summary of all the modifications made to the code base.
 
 6.0q (alpha):
   Minor changes for nrformats=alpha (see |'nrformats'|).
-  Problem with hard-coded keycode for the English pound sign. Added a define in
+  Problem with hard-coded keycode for the English pound sign.  Added a define in
   ascii.h
   Disabled multibyte for EBCDIC in feature.h
 
 6.0f (alpha):
-  First compile of Vim 6 on z/OS UNIX. Some minor changes were needed.
+  First compile of Vim 6 on z/OS UNIX.  Some minor changes were needed.
 
   Finally found the reason why make from the top level didn't work (I must have
-  been blind before!). The Makefile contained a list of targets in one target
-  line. On all other UNIX's the macro $@ evaluates to the first target in this
+  been blind before!).  The Makefile contained a list of targets in one target
+  line.  On all other UNIX's the macro $@ evaluates to the first target in this
   list, only on z/OS UNIX it evaluates to the last one :-(.
 
 5.6-390d:
@@ -282,7 +282,7 @@ not an exhaustive summary of all the modifications made to the code base.
 
 5.6-390c:
   I grepped through the source and examined every spot with a character
-  involved in a operation (+-). I hope I now found all EBCDIC/ASCII
+  involved in a operation (+-).  I hope I now found all EBCDIC/ASCII
   stuff, but ....
 
   Fixed:
@@ -295,7 +295,7 @@ not an exhaustive summary of all the modifications made to the code base.
     - fixed quick-access table in findoptions()
     - fixed 'g^H' select mode
     - fixed tgetstr() 'get terminal capability string', ESC and
-	    Ctrl chars where wrong. (Not used on OS/390 UNIX)
+	    Ctrl chars where wrong.  (Not used on OS/390 UNIX)
 
 
   ctags:
@@ -311,13 +311,13 @@ not an exhaustive summary of all the modifications made to the code base.
 	- added special compiler and linker options if building with X11
     - configure:
 	- after created via autoconf hand-edited it to make the test for
-	  ICEConnectionNumber work. This is a autoconf problem. OS/390 UNIX
+	  ICEConnectionNumber work.  This is a autoconf problem.  OS/390 UNIX
 	  needs -lX11 for this.
     - Makefile
 	- Don't include the lib directories ('-L...') into the variable
-	  ALL_LIBS. Use own variable ALL_LIB_DIRS instead. A fully POSIX
+	  ALL_LIBS.  Use own variable ALL_LIB_DIRS instead.  A fully POSIX
 	  compliant compiler must not accept objects/libraries and options
-	  mixed. Now we can call the linker like this:
+	  mixed.  Now we can call the linker like this:
 
 	    $(CC) $(LDFLAGS) $(ALL_LIB_DIRS) $(OBJ) $(ALL_LIBS)
 

runtime/doc/os_amiga.txt

@@ -1,4 +1,4 @@
-*os_amiga.txt*  For Vim version 7.0aa.  Last change: 2004 Jun 28
+*os_amiga.txt*  For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -13,7 +13,7 @@ Installation on the Amiga:
   look for the file "VIM:doc/help.txt" (for the help command).
   Setting the environment variable $VIM also works.  And the other way around:
   when $VIM used and it is not defined, "VIM:" is used.
-- With DOS 1.3 or earlier: Put "arp.library" in "libs:". Vim must have been
+- With DOS 1.3 or earlier: Put "arp.library" in "libs:".  Vim must have been
   compiled with the |+ARP| feature enabled.  Make sure that newcli and run are
   in "C:" (for executing external commands).
 - Put a shell that accepts a command with "-c" (e.g. "Csh" from Fish disk
@@ -21,13 +21,13 @@ Installation on the Amiga:
   executing external commands).
 
 If you have sufficient memory you can avoid startup delays by making Vim and
-csh resident with the command "rez csh vim". You will have to put
-"rezlib.library" in your "libs:" directory. Under 2.0 you will need rez
+csh resident with the command "rez csh vim".  You will have to put
+"rezlib.library" in your "libs:" directory.  Under 2.0 you will need rez
 version 0.5.
 
 If you do not use digraphs, you can save some memory by recompiling without
-the |+digraphs| feature. If you want to use Vim with other terminals you can
-recompile with the TERMCAP option. Vim compiles with Manx 5.x and SAS 6.x.
+the |+digraphs| feature.  If you want to use Vim with other terminals you can
+recompile with the TERMCAP option.  Vim compiles with Manx 5.x and SAS 6.x.
 See the makefiles and feature.h.
 
 If you notice Vim crashes on some files when syntax highlighting is on, or
@@ -47,7 +47,7 @@ If you want to use different colors set the termcap codes:
 	t_ZH (for italic text)
 	t_ZR (for normal text after t_ZH)
 
-Standard ANSI escape sequences are used. The codes are:
+Standard ANSI escape sequences are used.  The codes are:
 30 grey char   40 grey cell   >0 grey background    0 all attributes off
 31 black char  41 black cell  >1 black background   1 boldface
 32 white char  42 white cell  >2 white background   2 faint
@@ -57,8 +57,8 @@ Standard ANSI escape sequences are used. The codes are:
 36 white char  46 white cell  >6 white background   8 invisible
 37 blue char   47 blue cell   >7 blue background
 
-The codes with '>' must be the last. The cell and background color should be
-the same. The codes can be combined by separating them with a semicolon. For
+The codes with '>' must be the last.  The cell and background color should be
+the same.  The codes can be combined by separating them with a semicolon.  For
 example to get white text on a blue background: >
   :set t_me=^V<Esc>[0;32;43;>3m
   :set t_se=^V<Esc>[0;32;43;>3m
@@ -72,14 +72,14 @@ example to get white text on a blue background: >
 
 When using multiple commands with a filter command, e.g. >
   :r! echo this; echo that
-Only the output of the last command is used. To fix this you have to group the
-commands. This depends on the shell you use (that is why it is not done
-automatically in Vim). Examples: >
+Only the output of the last command is used.  To fix this you have to group the
+commands.  This depends on the shell you use (that is why it is not done
+automatically in Vim).  Examples: >
   :r! (echo this; echo that)
   :r! {echo this; echo that}
 
 Commands that accept a single file name allow for embedded spaces in the file
-name. However, when using commands that accept several file names, embedded
+name.  However, when using commands that accept several file names, embedded
 spaces need to be escaped with a backslash.
 
 ------------------------------------------------------------------------------
@@ -94,8 +94,8 @@ For the latest info about the MorphOS version:
 Problems ~
 
 There are a couple of problems which are not MorphOS related but more Vim and
-UN*X related. When starting up Vim in ram: it complains with a nag requester
-from MorphOS please simply ignore it. Another problem is when running Vim as
+UN*X related.  When starting up Vim in ram: it complains with a nag requester
+from MorphOS please simply ignore it.  Another problem is when running Vim as
 is some plugins will cause a few problems which you can ignore as well.
 Hopefully someone will be fixing it over the time.
 
@@ -116,7 +116,7 @@ Installation ~
 
 	ftp://ftp.vim.org/pub/vim/amiga/vim62rt.tgz
 
-   and unpack it in your 'Apps' directory of the MorphOS installation. For me
+   and unpack it in your 'Apps' directory of the MorphOS installation.  For me
    this would create following directory hierarchy:
 
 	MorphOS:Apps/Vim/Vim62/...
@@ -130,8 +130,8 @@ Installation ~
 
 4) Copy the '.vimrc' file to s:
 
-5) There is also a file named 'color-sequence' included in this archive. This
-   will set the MorphOS Shell to show ANSI colors. Please copy the file to s:
+5) There is also a file named 'color-sequence' included in this archive.  This
+   will set the MorphOS Shell to show ANSI colors.  Please copy the file to s:
    and change the s:shell-startup to:
 
 	;Begin VIM

runtime/doc/os_beos.txt

@@ -1,4 +1,4 @@
-*os_beos.txt*	For Vim version 7.0aa.  Last change: 2004 May 01
+*os_beos.txt*	For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -31,11 +31,11 @@ matters not discussed in this file, Vim behaves very much like the Unix
 1. General						*beos-general*
 
 The default syntax highlighting mostly works with different foreground colors
-to highlight items. This works best if you set your Terminal window to a
-darkish background and light letters. Some middle-grey background (for
+to highlight items.  This works best if you set your Terminal window to a
+darkish background and light letters.  Some middle-grey background (for
 instance (r,g,b)=(168,168,168)) with black letters also works nicely.  If you
 use the default light background and dark letters, it may look better to
-simply reverse the notion of foreground and background color settings. To do
+simply reverse the notion of foreground and background color settings.  To do
 this, add this to your .vimrc file (where <Esc> may need to be replaced with
 the escape character): >
 
@@ -48,7 +48,7 @@ the escape character): >
 2. Compiling Vim					*beos-compiling*
 
 From the Advanced Access Preview Release (AAPR) on, Vim can be configured with
-the standard configure script. To get the compiler and its flags right, use
+the standard configure script.  To get the compiler and its flags right, use
 the following command-line in the shell (you can cut and paste it in one go):
 
 CC=$BE_C_COMPILER CFLAGS="$BE_DEFAULT_C_FLAGS -O7" \
@@ -60,9 +60,9 @@ When configure has run, and you wish to enable GUI support, you must edit the
 config.mk file so that the lines with GUI_xxx refer to $(BEOSGUI_xxx) instead
 of $(NONE_xxx).
 Alternatively you can make this change in the Makefile; it will have a
-more permanent effect. Search for "NONE_".
+more permanent effect.  Search for "NONE_".
 
-After compilation you need to add the resources to the binary. Add the
+After compilation you need to add the resources to the binary.  Add the
 following few lines near the end (before the line with "exit $exit_value") of
 the link.sh script to do this automatically.
 
@@ -81,12 +81,12 @@ You will need it when using "make install" to install Vim.
 Now type "make" to compile Vim, then "make install" to install it.
 
 If you want to install Vim by hand, you must copy Vim to $HOME/config/bin, and
-create a bunch of symlinks to it ({g,r,rg}{vim,ex,view}). Furthermore you must
-copy Vims configuration files to $HOME/config/share/vim:
+create a bunch of symlinks to it ({g,r,rg}{vim,ex,view}).  Furthermore you must
+copy Vim's configuration files to $HOME/config/share/vim:
 vim-5.0s/{*.vim,doc,syntax}.  For completeness, you should also copy the nroff
-manual pages to $HOME/config/man/man1. Don't forget ctags/ctags and xxd/xxd!
+manual pages to $HOME/config/man/man1.  Don't forget ctags/ctags and xxd/xxd!
 
-Obviously, you need the unlimited linker to actually link Vim. See
+Obviously, you need the unlimited linker to actually link Vim.  See
 http://www.metrowerks.com for purchasing the CodeWarrior compiler for BeOS.
 There are currently no other linkers that can do the job.
 
@@ -97,7 +97,7 @@ you have the appropriate files installed. |beos-perl|
 3. Timeout in the Terminal				*beos-timeout*
 
 Because some POSIX/UNIX features are still missing[1], there is no direct OS
-support for read-with-timeout in the Terminal. This would meat that you cannot
+support for read-with-timeout in the Terminal.  This would mean that you cannot
 use :mappings of more than one character, unless you also :set notimeout.
 |'timeout'|
 
@@ -112,16 +112,16 @@ indistinctive character sequences.
 These problems do not exist in the GUI.
 
 [1]: there is no select() on file descriptors; also the termios VMIN and VTIME
-settings do not seem to work properly. This has been the case since DR7 at
+settings do not seem to work properly.  This has been the case since DR7 at
 least and still has not been fixed as of PR2.
 
 							*beos-unicode*
 4. Unicode vs. Latin1					*beos-utf8*
 
 BeOS uses Unicode and UTF-8 for text strings (16-bit characters encoded to
-8-bit characters). Vim assumes ISO-Latin1 or other 8-bit character codes.
-This does not produce the desired results for non-ASCII characters. Try the
-command :digraphs to see. If they look messed up, use :set isprint=@ to
+8-bit characters).  Vim assumes ISO-Latin1 or other 8-bit character codes.
+This does not produce the desired results for non-ASCII characters.  Try the
+command :digraphs to see.  If they look messed up, use :set isprint=@ to
 (slightly) improve the display of ISO-Latin1 characters 128-255.  This works
 better in the GUI, depending on which font you use (below).
 
@@ -133,46 +133,46 @@ You may also use the /boot/bin/xtou command to convert UTF-8 files from (xtou
 
 Normally Vim starts with the GUI if you start it as gvim or vim -g.  The BeOS
 version tries to determine if it was started from the Tracker instead of the
-Terminal, and if so, use the GUI anyway. However, the current detection scheme
-is fooled if you use the command "vim - </dev/null" or "vim filename &". The
+Terminal, and if so, use the GUI anyway.  However, the current detection scheme
+is fooled if you use the command "vim - </dev/null" or "vim filename &".  The
 latter can be called a feature but probably only works because there is no
 BSD-style job control.
 
 Stuff that does not work yet:
 
 - Running external commands from the GUI does not work 100% (again due to lack
-  of support for select()). There was a choice between seeing the command's
-  output, or being able to interrupt it. I chose for seeing the output. Even
+  of support for select()).  There was a choice between seeing the command's
+  output, or being able to interrupt it.  I chose for seeing the output.  Even
   now the command sometimes crashes mysteriously, apparently in Be's
-  malloc_internal() called from the putenv() function, after fork()ing. (data
-  access exception occurred, ec01b0ec:  90e80000 *stw r7, 0x0000 (r8))(:!ls
-  works usually, :r !ls usually doesn't). This has been reported as bug
+  malloc_internal() called from the putenv() function, after fork()ing.  (data
+  access exception occurred, ec01b0ec:  90e80000 *stw r7, 0x0000 (r8)).  (:!ls
+  works usually, :r !ls usually doesn't).  This has been reported as bug
   # 971215-083826.
 - The window title.
 - Starting the GUI from the Terminal version with :gui always acts as if
-  :gui -f were used. There is no way to fix this that I can see.
+  :gui -f were used.  There is no way to fix this that I can see.
 - There are some small display glitches here and there that I hope to clean up
-  later. Most of them occur when the window is partially obscured. Some of
+  later.  Most of them occur when the window is partially obscured.  Some of
   them seem to be bugs in BeOS, because the Terminal has similar glitches.
-- Mouse up events are not generated when outside the window. This is a bug in
-  BeOS. You can notice this when selecting text and moving the cursor outside
+- Mouse up events are not generated when outside the window.  This is a bug in
+  BeOS.  You can notice this when selecting text and moving the cursor outside
   the window, then letting go of the mouse button.  Another way is when you
   drag the scrollbar and do the same thing.  Because Vim still thinks you are
-  still playing with the scrollbar it won't change it itself. I provided a
+  still playing with the scrollbar it won't change it itself.  I provided a
   workaround which kicks in when the window is activated or deactivated (so it
   works best with focus- follows-mouse (/boot/bin/ffm) turned on).
 - The cursor does not flash (very low priority; I'm not sure I even like it
   when it flashes)
 
 
-The $VIM directory					*beos-vimdir*
+6. The $VIM directory					*beos-vimdir*
 
 $VIM is the symbolic name for the place where Vims support files are stored.
 The default value for $VIM is set at compile time and can be determined with >
 
   :version
 
-The normal value is /boot/home/config/share/vim. If you don't like it you can
+The normal value is /boot/home/config/share/vim.  If you don't like it you can
 set the VIM environment variable to override this, or set 'helpfile' in your
 .vimrc: >
 
@@ -189,7 +189,7 @@ session, unless you use the File Types application to set Vim to be "Single
 Launch") or on the Vim window (starts editing the files).  Dropping a folder
 sets Vim's current working directory. |:cd| |:pwd| If you drop files or
 folders with either SHIFT key pressed, Vim changes directory to the folder
-that contains the first item dropped. When starting Vim, there is no need to
+that contains the first item dropped.  When starting Vim, there is no need to
 press shift: Vim behaves as if you do.
 
 Files dropped set the current argument list. |argument-list|
@@ -198,10 +198,10 @@ Files dropped set the current argument list. |argument-list|
 8. Single Launch vs. Multiple Launch			*beos-launch*
 
 As distributed Vim's Application Flags (as seen in the FileTypes preference)
-are set to Multiple Launch. If you prefer, you can set them to Single Launch
+are set to Multiple Launch.  If you prefer, you can set them to Single Launch
 instead.  Attempts to start a second copy of Vim will cause the first Vim to
-open the files instead. This works from the Tracker but also from the command
-line. In the latter case, non-file (option) arguments are not supported.
+open the files instead.  This works from the Tracker but also from the command
+line.  In the latter case, non-file (option) arguments are not supported.
 
 NB: Only the GUI version has a BApplication (and hence Application Flags).
 This section does not apply to the GUI-less version, should you compile one.
@@ -214,16 +214,16 @@ Set fonts with >
   :set guifont=Courier10_BT/Roman/10
 
 where the first part is the font family, the second part the style, and the
-third part the size. You can use underscores instead of spaces in family and
+third part the size.  You can use underscores instead of spaces in family and
 style.
 
-Best results are obtained with monospaced fonts (such as Courier). Vim
+Best results are obtained with monospaced fonts (such as Courier).  Vim
 attempts to use all fonts in B_FIXED_SPACING mode but apparently this does not
 work for proportional fonts (despite what the BeBook says).
 
 Vim also tries to use the B_ISO8859_1 encoding, also known as ISO Latin 1.
-This also does not work for all fonts. It does work for Courier, but not for
-ProFontISOLatin1/Regular (strangely enough). You can verify this by giving the >
+This also does not work for all fonts.  It does work for Courier, but not for
+ProFontISOLatin1/Regular (strangely enough).  You can verify this by giving the >
 
   :digraphs
 
@@ -270,30 +270,30 @@ because the ALT (aka COMMAND) keys are not passed to applications.
 
 Vim calls the various mouse buttons LeftMouse, MiddleMouse and RightMouse.  If
 you use the default Mouse preference settings these names indeed correspond to
-reality. Vim uses this mapping:
+reality.  Vim uses this mapping:
 
     Button 1 -> LeftMouse,
     Button 2 -> RightMouse,
     Button 3 -> MiddleMouse.
 
 If your mouse has fewer than 3 buttons you can provide your own mapping from
-mouse clicks with modifier(s) to other mouse buttons. See the file
+mouse clicks with modifier(s) to other mouse buttons.  See the file
 vim-5.x/macros/swapmous.vim for an example.		|gui-mouse-mapping|
 
 
 12. Color names						*beos-colors*
 
-Vim has a number of color names built-in. Additional names are read from the
-file $VIMRUNTIME/rgb.txt, if present. This file is basically the color
-database from X. Names used from this file are cached for efficiency.
+Vim has a number of color names built-in.  Additional names are read from the
+file $VIMRUNTIME/rgb.txt, if present.  This file is basically the color
+database from X.  Names used from this file are cached for efficiency.
 
 
 13. Compiling with Perl					*beos-perl*
 
-Compiling with Perl support enabled is slightly tricky. The Metrowerks
-compiler has some strange ideas where to search for include files. Since
+Compiling with Perl support enabled is slightly tricky.  The Metrowerks
+compiler has some strange ideas where to search for include files.  Since
 several include files with Perl have the same names as some Vim header
-files, the wrong ones get included. To fix this, run the following Perl
+files, the wrong ones get included.  To fix this, run the following Perl
 script while in the vim-5.0/src directory: >
 
    preproc.pl > perl.h

runtime/doc/os_dos.txt

@@ -1,4 +1,4 @@
-*os_dos.txt*    For Vim version 7.0aa.  Last change: 2003 Dec 20
+*os_dos.txt*    For Vim version 7.0aa.  Last change: 2006 Feb 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -126,8 +126,8 @@ text.  For example, to get grey text on a blue background: >
 See |highlight-groups| for other groups that are available.
 
 A DOS console does not support attributes like bold and underlining.  You can
-set the color used in five modes with nine termcap options.  Note that this is
-not necessary since you can set the color directly with the ":highlight"
+set the color used in five modes with nine terminal options.  Note that this
+is not necessary since you can set the color directly with the ":highlight"
 command; these options are for backward compatibility with older Vim versions.
 The |'highlight'| option specifies which of the five modes is used for which
 action. >

runtime/doc/os_mac.txt

@@ -1,4 +1,4 @@
-*os_mac.txt*    For Vim version 7.0aa.  Last change: 2004 Dec 13
+*os_mac.txt*    For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar et al.
@@ -33,7 +33,7 @@ Indianapolis IN 46220 USA
 ==============================================================================
 1. Filename Convention					*mac-filename*
 
-You can use either the unix or mac path separator or a mix of both. In order
+You can use either the unix or mac path separator or a mix of both.  In order
 to determine if the specified filename is relative to the current folder or
 absolute (i.e. relative to the "Desktop"), the following algorithm is used:
 
@@ -59,7 +59,7 @@ You can use the |$VIM| and |$VIMRUNTIME|  variable. >
 2. .vimrc and .vim files				*mac-vimfile*
 
 On the Mac files starting with a dot "." are discouraged, thus the rc files
-are named "vimrc" or "_vimrc" and "gvimrc" or "_gvimrc". These files can be in
+are named "vimrc" or "_vimrc" and "gvimrc" or "_gvimrc".  These files can be in
 any format (mac, dos or unix).  Vim can handle any file format when the
 |'nocompatible'| option is set, otherwise it will only handle mac format
 files.

runtime/doc/os_mint.txt

@@ -1,4 +1,4 @@
-*os_mint.txt*   For Vim version 7.0aa.  Last change: 2001 Sep 03
+*os_mint.txt*   For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Jens M. Felderhoff
@@ -15,12 +15,12 @@ The Unix behavior described in the documentation also refers to the
 MiNT version of Vim unless explicitly stated otherwise.
 
 For wildcard expansion of <~> (home directory) you need a shell that
-expands the tilde. The vanilla Bourne shell doesn't recognize it.
+expands the tilde.  The vanilla Bourne shell doesn't recognize it.
 With csh and ksh it should work OK.
 
 The MiNT version of vim needs the termcap file /etc/termcap with the
-terminal capabilities of your terminal. Builtin termcaps are
-supported for the vt52 terminal. Termcap entries for the TOSWIN window
+terminal capabilities of your terminal.  Builtin termcaps are
+supported for the vt52 terminal.  Termcap entries for the TOSWIN window
 manager and the virtual console terminals have been appended to the
 termcap file that comes with the Vim distribution.
 

runtime/doc/os_msdos.txt

@@ -1,4 +1,4 @@
-*os_msdos.txt*  For Vim version 7.0aa.  Last change: 2004 Aug 31
+*os_msdos.txt*  For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -97,7 +97,7 @@ write a file, and for filter commands.  Or Vim runs out of memory, and random
 problems may result.
 
 The Dos32 version cannot have an unlimited number of files open at any one
-time.  The limit depends on the setting of FILES in your CONFIG.SYS. This
+time.  The limit depends on the setting of FILES in your CONFIG.SYS.  This
 defaults to 15; if you need to edit a lot of files, you should increase this.
 If you do not set FILES high enough, you can get strange errors, and shell
 commands may cause a crash!
@@ -241,7 +241,7 @@ In other versions, the following can be used.
 
 How to copy/paste text from/to vim in a dos box:
 
-1) to get VIM to run in a window, instead of full screen, press alt+enter.
+1) To get VIM to run in a window, instead of full screen, press alt+enter.
    This toggles back and forth between full screen and a dos window.
    NOTE: In Windows 95 you must have the property "Fast Pasting" unchecked!
    In the properties dialog box for the MS-DOS window, go to "MS-DOS
@@ -251,25 +251,25 @@ How to copy/paste text from/to vim in a dos box:
 
 2) To paste something _into_ Vim, put Vim in insert mode.
 
-3) put the text you want to paste on the windows clipboard.
+3) Put the text you want to paste on the windows clipboard.
 
-4) Click the control box in the upper left of the Vim window. (This looks
-   like a big minus sign). If you don't want to use the mouse, you can get
+4) Click the control box in the upper left of the Vim window.  (This looks
+   like a big minus sign.)  If you don't want to use the mouse, you can get
    this with alt+spacebar.
-5) on the resulting dropdown menu choose "Edit"
-6) on the child dropdown menu choose "Paste"
+5) On the resulting dropdown menu choose "Edit".
+6) On the child dropdown menu choose "Paste".
 
 To copy something from the Vim window to the clipboard,
 
-1) select the control box to get the control drop down menu.
-2) select "Edit".
-3) select "Mark"
-4) using either the keys or the mouse, select the part of the Vim window that
-   you want to copy. To use the keys, use the arrow keys, and hold down shift
+1) Select the control box to get the control drop down menu.
+2) Select "Edit".
+3) Select "Mark".
+4) Using either the keys or the mouse, select the part of the Vim window that
+   you want to copy.  To use the keys, use the arrow keys, and hold down shift
    to extend the selection.
-5) when you've completed your selection, press 'enter.' The selection
-   is now in the windows clipboard. By the way, this can be any
-   rectangular selection, for example columns 4-25 in rows 7-10. It can
+5) When you've completed your selection, press 'enter'.  The selection
+   is now in the windows clipboard.  By the way, this can be any
+   rectangular selection, for example columns 4-25 in rows 7-10.  It can
    include anything in the VIM window: the output of a :!dir, for
    example.
 

runtime/doc/os_os2.txt

@@ -1,4 +1,4 @@
-*os_os2.txt*    For Vim version 7.0aa.  Last change: 2004 Jan 09
+*os_os2.txt*    For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Paul Slootman
@@ -28,19 +28,19 @@ that are started via a shell escape from within Vim.  This specifically means
 that Vim won't be able to remove the swap file(s) associated with buffers open
 at the time the other program was started, until the other program is stopped.
 At that time, the swap file may be removed, but if Vim could not do that the
-first time, it won't be removed at all. You'll get warnings that some other
+first time, it won't be removed at all.  You'll get warnings that some other
 Vim session may be editing the file when you start Vim up again on that file.
-This can be reproduced with ":!start epm". Now quit Vim, and start Vim again
+This can be reproduced with ":!start epm".  Now quit Vim, and start Vim again
 with the file that was in the buffer at the time epm was started.  I'm working
 on this!
 
 A second problem is that Vim doesn't understand the situation when using it
 when accessing the OS/2 system via the network, e.g. using telnet from a Unix
-system, and then starting Vim. The problem seems to be that OS/2 =sometimes=
+system, and then starting Vim.  The problem seems to be that OS/2 =sometimes=
 recognizes function / cursor keys, and tries to convert those to the
-corresponding OS/2 codes generated by the "normal" PC keyboard. I've been
+corresponding OS/2 codes generated by the "normal" PC keyboard.  I've been
 testing a workaround (mapping the OS/2 codes to the correct functions), but so
-far I can't say anything conclusive (this is on Warp 3, by the way). In the
+far I can't say anything conclusive (this is on Warp 3, by the way).  In the
 meantime any help will be appreciated.
 
 
@@ -52,12 +52,12 @@ is generally available as (ask Archie about it):
     emxrt.zip     emx runtime package
 
 I've included a copy of emx.dll, which should be copied to one of the
-directories listed in your LIBPATH. Emx is GPL'ed, but the emx.dll library is
+directories listed in your LIBPATH.  Emx is GPL'ed, but the emx.dll library is
 not (read COPYING.EMX to find out what that means to you).
 
 This emx.dll is from the emxfix04.zip package, which unfortunately has a bug,
 eh, I mean a POSIX feature, in select().  Versions of Vim before 3.27 will
-appear to hang when starting (actually, while processing vimrc). Hit <Enter> a
+appear to hang when starting (actually, while processing vimrc).  Hit <Enter> a
 couple of times until Vim starts working if this happens.  Next, get an up to
 date version of Vim!
 
@@ -84,14 +84,14 @@ you get a tree of Vim files like this:
 	etc.
 
 Note: .vimrc may also be called _vimrc to accommodate those who have chosen to
-install OS/2 on a FAT file system. Vim first tries to find .vimrc and if that
+install OS/2 on a FAT file system.  Vim first tries to find .vimrc and if that
 fails, looks for _vimrc in the same place.  The existence of a .vimrc or
 _vimrc file influences the 'compatible' options, which can have unexpected side
 effects.  See |'compatible'|.
 
 If you're using network drives with OS/2, then you can install Vim on a
 network drive (including .vimrc; this is then called the "system" vimrc file),
-and then use a personal copy of .vimrc (the "user" vimrc file). This should be
+and then use a personal copy of .vimrc (the "user" vimrc file).  This should be
 located in a directory indicated by the HOME environment variable.
 
 
@@ -135,14 +135,14 @@ TERMINAL SETTING
 
 							*os2ansi*
 Use "os2ansi" as the TERM environment variable (or don't set it at all, as the
-default is the correct value). You can set term to os2ansi in the .vimrc, in
+default is the correct value).  You can set term to os2ansi in the .vimrc, in
 case you need TERM to be a different value for other applications.  The
 problem is that OS/2 ANSI emulation is quite limited (it doesn't have insert /
 delete line, for example).
 
 If you want to use a different value for TERM (because of other programs, for
 example), make sure that the termcap entry for that TERM value has the
-appropriate key mappings. The termcap.dat distributed with emx does not always
+appropriate key mappings.  The termcap.dat distributed with emx does not always
 have them.  Here are some suitable values to add to the termcap entry of your
 choice; these allow the cursor keys and the named function keys (such as
 pagedown) to work.
@@ -214,7 +214,7 @@ clipboard you would use: >
 	endif
 
 This will ensure that only on OS/2 clipbrd is called whereas on other
-platforms vims build in mechanism is used. (To enable this functions on every
+platforms vims build in mechanism is used.  (To enable this functions on every
 load of Vim place the above lines in your .vimrc.)
 
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/os_qnx.txt

@@ -1,4 +1,4 @@
-*os_qnx.txt*    For Vim version 7.0aa.  Last change: 2004 Apr 23
+*os_qnx.txt*    For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Julian Kinraid
@@ -22,7 +22,7 @@ Vim on QNX behaves much like other unix versions. |os_unix.txt|
 
 2. Compiling Vim					*qnx-compiling*
 
-Vim can be compiled using the standard configure/make approach. If you want to
+Vim can be compiled using the standard configure/make approach.  If you want to
 compile for X11, pass the --with-x option to configure.  Otherwise, running
 ./configure without any arguments or passing --enable-gui=photon, will compile
 vim with the Photon gui support.  Run ./configure --help , to find out other
@@ -118,12 +118,12 @@ Known problems:
 		set noguipty
 
 Bugs:
-	- Still a slight problem with menu highlighting
+	- Still a slight problem with menu highlighting.
 	- When using phditto/phinows/etc., if you are using a font that
 	  doesn't support the bold attribute, when vim attempts to draw
 	  bold text it will be all messed up.
 	- The cursor can sometimes be hard to see.
-	- A number of minor problems that can fixed :)
+	- A number of minor problems that can fixed. :)
 
 Todo:
 	- Improve multi-language support.

runtime/doc/os_risc.txt

@@ -1,4 +1,4 @@
-*os_risc.txt*   For Vim version 7.0aa.  Last change: 2004 May 01
+*os_risc.txt*   For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Thomas Leonard
@@ -47,9 +47,9 @@ distribution, but modified slightly to work within the limits of ADFS, plus
 some extra files such as the window templates.
 
 User choices are read from `Choices:*' and are saved to `<Choices$Write>.*'.
-If you have the new !Boot structure then these should be set up already. If
+If you have the new !Boot structure then these should be set up already.  If
 not, set Choices$Path to a list of directories to search when looking for
-user configuration files. Set Choices$Write to the directory you want files
+user configuration files.  Set Choices$Write to the directory you want files
 to be saved into (so your search patterns and marks can be remembered between
 sessions).
 
@@ -58,7 +58,7 @@ sessions).
 2. Filename munging
 
 All pathname munging is disabled by default, so Vim should behave like a
-normal RISC OS application now. So, if you want to edit `doc/html' then you
+normal RISC OS application now.  So, if you want to edit `doc/html' then you
 actually type `*vi doc/html'.
 
 The only times munging is done is when:
@@ -66,7 +66,7 @@ The only times munging is done is when:
 - Searching included files from C programs, since these are always munged.
   See |[I|.
   Note: make sure you are in the right directory when you use this
-	command (ie the one with subdirectories 'c' and 'h').
+	command (i.e. the one with subdirectories 'c' and 'h').
 
 - Sourcing files using |:so|.
   Paths starting `$VIM/' are munged like this:
@@ -88,7 +88,7 @@ To use Vim from the command-line use the `*vi' command (or '*ex' for
 Type `*vi -h' for a list of options.
 
 Running the command-line version of Vim in a large high-color mode may cause
-the scrolling to be very slow. Either change to a mode with fewer colors or
+the scrolling to be very slow.  Either change to a mode with fewer colors or
 use the GUI version.
 
 Also, holding down Ctrl will slow it down even more, and Ctrl-Shift will
@@ -115,7 +115,7 @@ The global clipboard is supported, so you can select some text and then
 paste it directly into another application (provided it supports the
 clipboard too).
 
-Clicking Menu now opens a menu like a normal RISC OS program. Hold down Shift
+Clicking Menu now opens a menu like a normal RISC OS program.  Hold down Shift
 when clicking Menu to paste (from the global clipboard).
 
 Dragging a file to the window replaces the CURRENT buffer (the one with the
@@ -134,27 +134,27 @@ For fonts, you have the choice of the system font, an outline font, the system
 font via ZapRedraw and any of the Zap fonts via ZapRedraw: >
 
   :set guifont=
-<			To use the system font via the VDU drivers. Supports
+<			To use the system font via the VDU drivers.  Supports
 			bold and underline.
 >
   :set guifont=Corpus.Medium
-<			Use the named outline font. You can use any font, but
+<			Use the named outline font.  You can use any font, but
 			only monospaced ones like Corpus look right.
 >
   :set guifont=Corpus.Medium:w8:h12:b:i
 <			As before, but with size of 8 point by 12 point, and
 			in bold italic.
 			If only one of width and height is given then that
-			value is used for both. If neither is given then 10
+			value is used for both.  If neither is given then 10
 			point is used.
 
-Thanks to John Kortink, Vim can use the ZapRedraw module. Start the font name
+Thanks to John Kortink, Vim can use the ZapRedraw module.  Start the font name
 with '!' (or '!!' for double height), like this: >
 
   :set guifont=!!
 <			Use the system font, but via ZapRedraw.  This gives a
 			faster redraw on StrongARM processors, but you can't
-			get bold or italic text. Double height.
+			get bold or italic text.  Double height.
 >
   :set guifont=!script
 <			Uses the named Zap font (a directory in VimFont$Path).
@@ -164,12 +164,12 @@ with '!' (or '!!' for double height), like this: >
 			currently, but you can use any of the Zap fonts if
 			they are in VimFont$Path.
 			Vim will try to load font files '0', 'B', 'I' and 'IB'
-			from the named directory. Only '0' (normal style) MUST
-			be present. Link files are not currently supported.
+			from the named directory.  Only '0' (normal style) MUST
+			be present.  Link files are not currently supported.
 
 Note that when using ZapRedraw the edit bar is drawn in front of the character
-you are on rather than behind it. Also redraw is incorrect for screen modes
-with eigen values of 0. If the font includes control characters then you can
+you are on rather than behind it.  Also redraw is incorrect for screen modes
+with eigen values of 0.  If the font includes control characters then you can
 get Vim to display them by changing the 'isprint' option.
 
 If you find the scrolling is too slow on your machine, try experimenting
@@ -199,8 +199,8 @@ It seems to work pretty well now, using '*vi -T ansi'.
 
 If Vim crashes then the swap and backup files (if any) will be in the
 directories set with the 'directory' and 'bdir' options.  By default the swap
-files are in <Wimp$ScrapDir> (ie inside !Scrap) and backups are in the
-directory you were saving to. Vim will allow you to try and recover the file
+files are in <Wimp$ScrapDir> (i.e. inside !Scrap) and backups are in the
+directory you were saving to.  Vim will allow you to try and recover the file
 when you next try to edit it.
 
 To see a list of swap files, press <F12> and type `*vi -r'.
@@ -223,13 +223,13 @@ command-line version, or press CTRL-C in the GUI version.
 							*riscos-memory*
 8. Memory usage
 
-Vim will use dynamic areas on RISC OS 3.5 or later. If you can use them on
-older machines then edit the !RunTxt and GVim files. I don't know what UnixLib
+Vim will use dynamic areas on RISC OS 3.5 or later.  If you can use them on
+older machines then edit the !RunTxt and GVim files.  I don't know what UnixLib
 does by default on these machines so I'm playing safe.
 
 It doesn't work at all well without dynamic areas, since it can't change its
-memory allocation once running. Hence you should edit `!Vim.GVim' and
-`!Vim.!RunTxt' to choose the best size for you. You probably need at least
+memory allocation once running.  Hence you should edit `!Vim.GVim' and
+`!Vim.!RunTxt' to choose the best size for you.  You probably need at least
 about 1400K.
 
 ==============================================================================
@@ -237,11 +237,11 @@ about 1400K.
 9. Filetypes
 
 You can now specify that autocommands are only executed for files of certain
-types. The filetype is given in the form &xxx, when xxx is the filetype.
+types.  The filetype is given in the form &xxx, when xxx is the filetype.
 
-Filetypes must be specified by number (eg &fff for Text).
+Filetypes must be specified by number (e.g. &fff for Text).
 
-The system has changed from version 5.3. The new sequence of events is:
+The system has changed from version 5.3.  The new sequence of events is:
 
 - A file is loaded. |'osfiletype'| is set to the RISC OS filetype.
 - Based on the filetype and pathname, Vim will try to set |'filetype'| to the
@@ -264,7 +264,7 @@ Some examples may make this clearer:
   since many pathnames contain them.
 
 - You can prefix the command with '~', which stops any output from being
-  displayed. This also means that you don't have to press <Enter> afterwards,
+  displayed.  This also means that you don't have to press <Enter> afterwards,
   and stops the screen from being redrawn. {only in the GUI version}
 
 ==============================================================================
@@ -274,14 +274,14 @@ Some examples may make this clearer:
 Downloading everything you need:
 
 - Get the latest source distribution (see www.vim.org)
-- Get the runtime environment files (eg these help files)
+- Get the runtime environment files (e.g. these help files)
 - Get the `extra' archive (contains the RISC OS specific bits)
 - Get the RISC OS binary distribution (if possible)
 
 
 Unarchiving:
 
-- Create a raFS disk and put the archives on it.
+- Create a raFS disk and put the archives on it
 - Un-gzip them
 - Un-tar them   (*tar xELf 50 archive/tar)
 
@@ -289,9 +289,9 @@ Unarchiving:
 Recompiling the sources:
 
 - Create c, s, and h directories.
-- Put all the header files in 'h'	     \
-- Put all the C files in `c'		     | And lose the extensions
-- Put the assembler file (`swis/s') in 's'   /
+- Put all the header files in 'h'.	     \
+- Put all the C files in `c'.		     | And lose the extensions
+- Put the assembler file (`swis/s') in 's'.  /
 - Rename all the files in `proto' to `h', like this:
     raFS::VimSrc.source.proto.file/pro
 	  becomes
@@ -300,9 +300,9 @@ Recompiling the sources:
     .pro"
        with
     _pro.h"
-- Create a simple Makefile if desired and do '*make -k'
-  Use 'CC = gcc -DRISCOS -DUSE_GUI -O2 -x c' in the Makefile
-- Save the binary as !Vim.Vim in the binary distribution
+- Create a simple Makefile if desired and do '*make -k'.
+  Use 'CC = gcc -DRISCOS -DUSE_GUI -O2 -x c' in the Makefile.
+- Save the binary as !Vim.Vim in the binary distribution.
 
 
 Updating the run-time environment:
@@ -311,9 +311,9 @@ Updating the run-time environment:
   new files.
 - Remove files in `doc' not ending in `/txt', except for `tags'.
 - Lose the extensions from the files in `doc'.
-- Edit the `doc.tags' file. Remove extensions from the second column: >
+- Edit the `doc.tags' file.  Remove extensions from the second column: >
 	:%s/^\(.[^\t]*\t.*\)\.txt\t/\1\t/
-- Remove extensions from the syntax files. Split them into two directories
+- Remove extensions from the syntax files.  Split them into two directories
   to avoid the 77 entry limit on old ADFS filesystems.
 - Edit `Vim:FileType' to match `*.c.*' as well as `*/c' and so on.
   Add filetype checking too.

runtime/doc/os_unix.txt

@@ -1,4 +1,4 @@
-*os_unix.txt*   For Vim version 7.0aa.  Last change: 2003 Mar 15
+*os_unix.txt*   For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -11,7 +11,7 @@ For compiling Vim on Unix see "INSTALL" and "Makefile" in the src directory.
 
 The default help file name is "/usr/local/lib/vim/help.txt"
 The files "$HOME/.vimrc" and "$HOME/.exrc" are used instead of "s:.vimrc" and
-"s:.exrc". Additionally "/usr/local/etc/vimrc" is used first.
+"s:.exrc".  Additionally "/usr/local/etc/vimrc" is used first.
 If "/usr/local/share" exists it is used instead of "/usr/local/lib".
 
 Temporary files (for filtering) are put in "/tmp".  If you want to place them
@@ -26,15 +26,15 @@ For executing external commands fork()/exec() is used when possible, otherwise
 system() is used, which is a bit slower.  The output of ":version" includes
 |+fork| when fork()/exec() is used, |+system()| when system() is used.  This
 can be changed at compile time.
-(For forking of the GUI version see |gui-fork|).
+(For forking of the GUI version see |gui-fork|.)
 
 Because terminal updating under Unix is often slow (e.g. serial line
 terminal, shell window in suntools), the 'showcmd' and 'ruler' options
-are default off. If you have a fast terminal, try setting them on.  You might
+are default off.  If you have a fast terminal, try setting them on.  You might
 also want to set 'ttyfast'.
 
 When using Vim in an xterm the mouse clicks can be used by Vim by setting
-'mouse' to "a". If there is access to an X-server gui style copy/paste will
+'mouse' to "a".  If there is access to an X-server gui style copy/paste will
 be used and visual feedback will be provided while dragging with the mouse.
 If you then still want the xterm copy/paste with the mouse, press the shift
 key when using the mouse.  See |mouse-using|.  Visual feedback while dragging
@@ -54,7 +54,7 @@ supports colors, but "T_Co" is empty or zero): >
 
 For real color terminals the ":highlight" command can be used.
 
-The file "tools/Vim132" is a shell script that can be used to put Vim in 132
+The file "tools/vim132" is a shell script that can be used to put Vim in 132
 column mode on a vt100 and lookalikes.
 
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/os_vms.txt

@@ -1,4 +1,4 @@
-*os_vms.txt*    For Vim version 7.0aa.  Last change: 2004 Jun 16
+*os_vms.txt*    For Vim version 7.0aa.  Last change: 2006 Mar 02
 
 
 		  VIM REFERENCE MANUAL
@@ -47,16 +47,22 @@ You can download precompiled executables from:
 
 To use the precompiled binary version, you need one of these archives:
 
-  vim-XX-exe-alpha-gui.zip      Alpha GUI/Motif executables
-  vim-XX-exe-alpha-gtk.zip      Alpha GUI/GTK executables
-  vim-XX-exe-alpha-term.zip     Alpha console executables
+  vim-XX-exe-ia64-gui.zip       IA64 GUI/Motif executables
+  vim-XX-exe-ia64-gtk.zip       IA64 GUI/GTK executables
+  vim-XX-exe-ia64-term.zip      IA64 console executables
+  vim-XX-exe-axp-gui.zip        Alpha GUI/Motif executables
+  vim-XX-exe-axp-gtk.zip        Alpha GUI/GTK executables
+  vim-XX-exe-axp-term.zip       Alpha console executables
   vim-XX-exe-vax-gui.zip	VAX GUI executables
   vim-XX-exe-vax-term.zip       VAX console executables
 
-and of course
+and of course (optional)
   vim-XX-runtime.zip		runtime files
 
-The binary archives contain: vim.exe, ctags.exe, xxd.exe, mms_vim.exe files.
+The binary archives contain: vim.exe, ctags.exe, xxd.exe files.
+
+For GTK executables you will need GTKLIB that is available for 
+Alpha and IA64 platform.
 
 ==============================================================================
 
@@ -68,33 +74,35 @@ See the file [.SRC]INSTALLVMS.TXT.
 
 4. Problems						*vms-problems*
 
-The code has been tested under Open VMS 6.2 - 7.3 on Alpha and VAX platforms
-with the DECC compiler. It should work without bigger problems.
-If it happened that your system does not have some include libraries you can
-tune up in OS_VMS_CONF.H file.
+The code has been tested under Open VMS 6.2 - 8.2 on Alpha, VAX and IA64
+platforms with the DEC C compiler.  It should work without bigger problems.
+If your system does not have some include libraries you can tune up in
+OS_VMS_CONF.H file.
 
 If you decided to build Vim with +perl, +python, etc. options, first you need
-to download OpenVMS distributions of Perl and Python. Build and deploy the
-libraries and change adequate lines in MAKE_VMS.MMS file. There should not be
-problem from Vim side.
+to download OpenVMS distributions of Perl and Python.  Build and deploy the
+libraries and change adequate lines in MAKE_VMS.MMS file.  There should not be
+a problem from Vim side.
 
-Note: Under VAX it should work with DEC C compiler without problem. VAXC
-compiler is not fully ANSI C compatible in pre-processor directives
-semantics, therefore you have to use a converter program what will do the
-lion part of the job. For detailed instruction read file INSTALLvms.txt
+Also GTK, XPM library paths should be configured in MAKE_VMS.MMS
 
-MMS_VIM.EXE is building together with VIM.EXE, but for XD.EXE you should
+Note: Under VAX it should work with the DEC C compiler without problems.  The
+VAX C compiler is not fully ANSI C compatible in pre-processor directives
+semantics, therefore you have to use a converter program what will do the lion
+part of the job.  For detailed instructions read file INSTALLvms.txt
+
+MMS_VIM.EXE is build together with VIM.EXE, but for XD.EXE you should
 change to subdirectory and build it separately.
 
-CTAGS is not part of Vim source distribution any more, however the OpenVMS
-specific source might contain CTAGS source files as it is described above.
+CTAGS is not part of the Vim source distribution anymore, however the OpenVMS
+specific source might contain CTAGS source files as described above.
 You can find more information about CTAGS on VMS at
 http://www.polarhome.com/ctags/
 
 Advanced users may try some acrobatics in FEATURE.H file also.
 
 It is possible to compile with +xfontset +xim options too, but then you have
-to set up GUI fonts etc. correctly. See. :help xim from Vim command prompt.
+to set up GUI fonts etc. correctly.  See :help xim from Vim command prompt.
 
 You may want to use GUI with GTK icons, then you have to download and install
 GTK for OpenVMS or at least runtime shareable images - LIBGTK from
@@ -116,10 +124,10 @@ Vim uses a special directory structure to hold the document and runtime files:
     |- vim57
     |----- doc
     |----- syntax
-    |- vim60
+    |- vim62
     |----- doc
     |----- syntax
-    |- vim61
+    |- vim64
     |----- doc
     |----- syntax
     vimrc    (system rc files)
@@ -132,18 +140,18 @@ Use: >
 	define/nolog TMP	device:[path.tmp]
 
 to get vim.exe to find its document, filetype, and syntax files, and to
-specify a directory where temporary files will be located. Copy the "runtime"
+specify a directory where temporary files will be located.  Copy the "runtime"
 subdirectory of the vim distribution to vimruntime.
 
 Logicals $VIMRUNTIME and $TMP are optional.
 
 If $VIMRUNTIME is not set, Vim will guess and try to set up automatically.
-Read more about at :help runtime
+Read more about it at :help runtime
 
 If $TMP is not set, you will not be able to use some functions as CTAGS,
 XXD, printing etc. that use temporary directory for normal operation.
-$TMP directory should be readable and writable by the user(s).
-The easiest way to set up $TMP is to define logical: >
+The $TMP directory should be readable and writable by the user(s).
+The easiest way to set up $TMP is to define a logical: >
 
 	define/nolog TMP SYS$SCRATCH
 or as: >
@@ -155,9 +163,9 @@ or as: >
 
 Usually, you want to run just one version of Vim on your system, therefore
 it is enough to dedicate one directory for Vim.
-Copy all Vim runtime directory structure to the deployment position.
+Copy the whole Vim runtime directory structure to the deployment position.
 Add the following lines to your LOGIN.COM (in SYS$LOGIN directory).
-Set up logical $VIM as: >
+Set up the logical $VIM as: >
 
 	$ define VIM device:<path>
 
@@ -174,20 +182,20 @@ Please, check the notes for customization and configuration of symbols.
 You may want to create .vimrc and .gvimrc files in your home directory
 (SYS$LOGIN) to overwrite default settings.
 
-The easiest way is just rename example files. You may leave the menu file
-(MENU.VIM) and files vimrc and gvimrc in the original $VIM directory. It will
-be default setup for all users, and for users is enough just to have their
-own additions or resetting in home directory in files .vimrc and .gvimrc.
+The easiest way is just rename example files.  You may leave the menu file
+(MENU.VIM) and files vimrc and gvimrc in the original $VIM directory.  It will
+be default setup for all users, and for users it is enough just to have their
+own additions or resetting in their home directory in files .vimrc and .gvimrc.
 It should work without problems.
 
-Note: Remember, system rc files (default for all users) does not have leading
-"." So, system rc files are: >
+Note: Remember, system rc files (default for all users) don't have a leading
+".".  So, system rc files are: >
 
 	$VIM:vimrc
 	$VIM:gvimrc
 	$VIM:menu.vim
 
-and user's customized rc files are: >
+and user customized rc files are: >
 
 	sys$login:.vimrc
 	sys$login:.gvimrc
@@ -203,7 +211,7 @@ Example LOGIN.COM: >
 
 Note: This set-up should be enough, if you are working on standalone server or
 clustered environment, but if you want to use Vim as internode editor in
-DECNET environment, it will satisfy you as well.
+DECNET environment, it will satisfy as well.
 You just have to define the "whole" path: >
 
 	$ define VIM "<server_name>[""user password""]::device:<path>"
@@ -214,10 +222,11 @@ as for example: >
 	$ define VIM "PLUTO::RF10:[UTIL.VIM]"
 	$ define VIM "PLUTO""ZAY mypass""::RF10:[UTIL.VIM]" ! if passwd required
 
-You can also use $VIMRUNTIME logical to point to proper version of Vim if you
-have installed more versions in the same time. If $VIMRUNTIME is not defined
-Vim will borrow value from $VIM logical. You can find more information about
-$VIMRUNTIME logical by typing :help runtime as a Vim command.
+You can also use the $VIMRUNTIME logical to point to the proper version of Vim
+if you have installed more versions at the same time.  If $VIMRUNTIME is not
+defined Vim will borrow its value from the $VIM logical.  You can find more
+information about the $VIMRUNTIME logical by typing :help runtime as a Vim
+command.
 
 System administrators might want to set up a system wide Vim installation,
 then add to the SYS$STARTUP:SYLOGICALS.COM >
@@ -231,38 +240,51 @@ and to the SYS$STARTUP:SYLOGIN.COM >
 	$ gv*im:== spawn/nowait/input=NLA0 mcr VIM:VIM.EXE -g -GEOMETRY 80x40
 
 
-It will set up normal Vim work environment for every user on the system.
+It will set up a normal Vim work environment for every user on the system.
 
+IMPORTANT: Vim on OpenVMS (and on other case insensitive system) command line
+parameters are assumed to be lowecase. In order to indicate that a command
+line parameter is uppercase "/" sign must be used.
+
+Examples:
+  >
+	vim -R  filename  ! means: -r List swap files and exit
+        vim -/r filename  ! means: -R Readonly mode (like "view")
+        vim -u  <vimrc>   ! means: -u Use <vimrc> instead of any .vimrc   
+        vim -/u <gvimrc>  ! means: -U Use <gvimrc> instead of any .gvimrc
+                  
 ==============================================================================
 
 7. GUI mode questions					*vms-gui*
 
-OpenVMS in a real mainframe OS, therefore even if it has a GUI console, most of
-the users does not use a native X/Window environment during normal operation.
-It is not possible to start Vim in GUI mode "just like that". But anyhow it is
-not too complicate either.
+OpenVMS is a real mainframe OS, therefore even if it has a GUI console, most
+of the users do not use a native X/Window environment during normal operation.
+It is not possible to start Vim in GUI mode "just like that".  But anyhow it
+is not too complicated either.
 
-First of all: you will need an executable that is built with enabled GUI.
+First of all: you will need an executable that is built with the GUI enabled.
 
 Second: you need to have installed DECW/Motif on your VMS server, otherwise
 you will get errors that some shareable libraries are missing.
 
-Third: If you choose to run Vim with extra feature as GUI/GTK then you need
-GTK installation too or at least GTK runtime environment (LIBGTK etc.)
+Third: If you choose to run Vim with extra features such as GUI/GTK then you
+need a GTK installation too or at least a GTK runtime environment (LIBGTK
+can be downloaded from http://www.polarhome.com/vim/).
 
 1) If you are working on the VMS X/Motif console:
    Start Vim with the command: >
 
 	$ mc device:<path>VIM.EXE -g
 <
-   or type :gui as a command to the Vim command prompt. For more info :help gui
+   or type :gui as a command to the Vim command prompt.  For more info :help
+   gui
 
-2) If you are working on other X/Window environment as Unix or some remote X
-   VMS console. Set up display to your host with: >
+2) If you are working on some other X/Window environment like Unix or a remote
+   X VMS console.  Set up display to your host with: >
 
 	$ set disp/create/node=<your IP address>/trans=<transport-name>
 <
-   and start Vim as in point 1. You can find more help in VMS documentation or
+   and start Vim as in point 1.  You can find more help in VMS documentation or
    type: help set disp in VMS prompt.
    Examples: >
 
@@ -276,11 +298,11 @@ For more information type $help set disp in VMS prompt.
 3) Another elegant solution is XDM if you have installed on OpenVMS box.
    It is possible to work from XDM client as from GUI console.
 
-4) If you are working on MS Windows or other non X/Window environment
-   You need to set up one X server and run Vim as in point 2.
-   For MS Windows there are available free X servers as MIX , Omni X etc.
+4) If you are working on MS-Windows or some other non X/Window environment
+   you need to set up one X server and run Vim as in point 2.
+   For MS-Windows there are available free X servers as MIX , Omni X etc.,
    as well as excellent commercial products as eXcursion or ReflectionX with
-   built in DEC support.
+   built-in DEC support.
 
 Please note, that executables without GUI are slightly faster during startup
 then with enabled GUI in character mode. Therefore, if you do not use GUI
@@ -319,7 +341,7 @@ Read more in ch: 8.6 (Terminal problems).
 
 8.2 Filters
 
-Vim supports filters; ie. if you have a sort program that can handle
+Vim supports filters, i.e., if you have a sort program that can handle
 input/output redirection like Unix (<infile >outfile), you could use >
 
 	:map \s 0!'aqsort<CR>
@@ -333,19 +355,20 @@ Vim is saving files into a new file with the next higher file version
 number, try these settings. >
 
 	:set nobackup	     " does not create *.*_ backup files
-	:set nowritebackup   " does not have any purpose on VMS. It's default.
+	:set nowritebackup   " does not have any purpose on VMS.  It's the
+	                     " default.
 
 Recovery is working perfect as well from the default swap file.
 Read more with :help swapfile
 
 (Claude Marinier <ClaudeMarinier@xwavesolutions.com> Vim 5.5, Zoltan Arpadffy
-Vim 5.6 )
+Vim 5.6)
 
 
 8.4 Directory conversion
 
 Vim will internally convert any unix-style paths and even mixed unix/VMS
-paths into VMS style paths. Some typical conversions resemble:
+paths into VMS style paths.  Some typical conversions resemble:
 
 	/abc/def/ghi		-> abc:[def]ghi.
 	/abc/def/ghi.j		-> abc:[def]ghi.j
@@ -377,9 +400,9 @@ example: >
 Note: syntax is very important, otherwise VMS will recognize more parameters
 instead of one (resulting with: file not found)
 
-2.  Set up Vim as your internode editor. If Vim is not installed on your host,
-just set up your IP address, full Vim path including the server name and run
-the command procedure below: >
+2.  Set up Vim as your internode editor.  If Vim is not installed on your
+host, just set up your IP address, the full Vim path including the server name
+and run the command procedure below: >
 
 	$ if (p1 .eqs. "") .OR. (p2 .eqs. "") then goto usage
 	$ set disp/create/node=<your_IP_here>/trans=tcpip
@@ -392,8 +415,8 @@ the command procedure below: >
 	$ write sys$output " Example: @SETVIM.COM username passwd"
 	$ end:
 
-Note: Never use it in clustered environment (you do not need it), and load could
-be very-very slow, but even faster then a local Emacs. :-)
+Note: Never use it in a clustered environment (you do not need it), loading
+could be very-very slow, but even faster then a local Emacs. :-)
 
 (Zoltan Arpadffy, Vim 5.6)
 
@@ -404,7 +427,7 @@ If your terminal name is not known to Vim and it is trying to find the default
 one you will get the following message during start-up:
 ---
 Terminal entry not found in termcap
-'unknown-terminal' not known. Available built-in terminals are:
+'unknown-terminal' not known.  Available built-in terminals are:
     builtin_gui
     builtin_riscos
     builtin_amiga
@@ -422,13 +445,13 @@ defaulting to 'vt320'
 ---
 The solution is to define default terminal name: >
 
-	$ ! unknown terminal name. let us use vt320 or ansi instead.
+	$ ! unknown terminal name.  Let us use vt320 or ansi instead.
 	$ ! Note: it's case sensitive
 	$ define term "vt320"
 
 Terminals from VT100 to VT320 (as V300, VT220, VT200 ) do not need any extra
-keyboard mappings. They should work perfect as they are, including arrows,
-Ins, Del buttons etc. Except Backspace in GUI mode. To solve it, add to
+keyboard mappings.  They should work perfect as they are, including arrows,
+Ins, Del buttons etc., except Backspace in GUI mode.  To solve it, add to
 .gvimrc: >
 
 	inoremap <Del> <BS>
@@ -457,9 +480,9 @@ special commands to execute executables: >
 	MCR <path>filename <parameters>
 
 OpenVMS users always have to be aware that the Vim command :! "just" drop them
-to DCL prompt. This feature is possible to use without any problem with all
+to DCL prompt.  This feature is possible to use without any problem with all
 DCL commands, but if we want to execute some program as XXD, CTAGS, JTAGS etc.
-we're running into trouble if we following the Vim documentation (see: help
+we're running into trouble if we follow the Vim documentation (see: help
 xxd).
 
 Solution: Execute with the MC command and add the full path to the executable.
@@ -470,9 +493,9 @@ Example: Instead of :%!xxd command use: >
 ... or in general: >
 	:!mc <path>filename <parameters>
 
-Note: You can use XXD, and CTAGS from GUI menu.
+Note: You can use XXD and CTAGS from GUI menu.
 
-To customize ctags it is possible to define logical $CTAGS with standard
+To customize ctags it is possible to define the logical $CTAGS with standard
 parameters as: >
 
 	define/nolog CTAGS "--totals -o sys$login:tags"
@@ -488,7 +511,7 @@ documentation at http://ctags.sourceforge.net/ctags.html.
 If you want to use your .vimrc and .gvimrc from other platforms (e.g. Windows)
 you can get in trouble if you ftp that file(s): VMS has different end-of-line
 indication.
-The symptom is that ViM is not sourcing your .vimrc/.gvimrc, even if you say:
+The symptom is that Vim is not sourcing your .vimrc/.gvimrc, even if you say:
 >
 	:so sys$login:.vimrc
 
@@ -535,8 +558,8 @@ will be confused after a window-resize.
 
 From 6.0 diff functionality has been implemented, but OpenVMS does not use
 GNU/Unix like diff therefore built in diff does not work.
-There is a simple solution to solve this anomaly. Install an Unix like diff
-and Vim will work perfect in diff mode too. You just have to redefine your
+There is a simple solution to solve this anomaly.  Install a Unix like diff
+and Vim will work perfect in diff mode too.  You just have to redefine your
 diff program as: >
 
 	define /nolog diff <GNU_PATH>diff.exe
@@ -551,16 +574,16 @@ boxes that is meant to solve GNU problems on OpenVMS.
 8.12 diff-mode
 
 Vim 6.0 and higher supports vim diff-mode (See |new-diff-mode|, |diff-mode|
-and |08.7|). This uses the external program 'diff' and expects a Unix-like
-output format from diff. The standard VMS diff has a different output
-format. To use vim on VMS in diff-mode, you need to:
+and |08.7|).  This uses the external program 'diff' and expects a Unix-like
+output format from diff.  The standard VMS diff has a different output
+format.  To use vim on VMS in diff-mode, you need to:
     1 Install a Unix-like diff program, e.g. GNU diff
     2 Tell vim to use the Unix-like diff for diff-mode.
 
 You can download GNU diff from the VIM-VMS website, it is one of the GNU
-tools in http://www.polarhome.com/vim/files/gnu_tools.zip. I suggest to
+tools in http://www.polarhome.com/vim/files/gnu_tools.zip.  I suggest to
 unpack it in a separate directory "GNU" and create a logical GNU: that
-points to that directory. e.g: >
+points to that directory, e.g: >
 
    DEFINE GNU    <DISK>:[<DIRECTORY>.BIN.GNU]
 
@@ -569,9 +592,9 @@ prompt: >
 
    GDIFF :==     $GNU:DIFF.EXE
 
-Now you need to tell vim to use the new diff program. Take the example
+Now you need to tell vim to use the new diff program.  Take the example
 settings from |diff-diffexpr| and change the call to the external diff
-program to the new diff on VMS. Add this to your .vimrc file: >
+program to the new diff on VMS.  Add this to your .vimrc file: >
 
      " Set up vimdiff options
        if v:version >= 600
@@ -612,8 +635,8 @@ You can now compare files in 4 ways: >
 
 8.13 Allow '$' in C keywords
 
-DEC C uses many identifiers with '$' in them. This is not allowed in ANSI C,
-and vim recognises the '$' as the end of the identifier. You can change this
+DEC C uses many identifiers with '$' in them.  This is not allowed in ANSI C,
+and vim recognises the '$' as the end of the identifier.  You can change this
 with the |iskeyword|command.
 Add this command to your .vimrc file: >
 
@@ -625,7 +648,7 @@ CS.VIM) and add this command: >
 	set iskeyword+=$
 
 Now word-based commands, e.g. the '*'-search-command and the CTRL-]
-tag-lookup, work on the whole identifier. (Ctags on VMS also supports '$' in
+tag-lookup, work on the whole identifier.  (Ctags on VMS also supports '$' in
 C keywords since ctags version 5.1.)
 
 ( Coen Engelbarts, Vim 6.1)
@@ -633,8 +656,8 @@ C keywords since ctags version 5.1.)
 8.14 VIMTUTOR for beginners
 
 It exits VIMTUTOR.COM DCL script that can help Vim beginners to learn/make
-first steps with Vim on OpenVMS. Depending of binary distribution you may start
-it with: >
+first steps with Vim on OpenVMS.  Depending of binary distribution you may
+start it with: >
 
 	@vim:vimtutor
 
@@ -644,6 +667,20 @@ it with: >
 
 9. VMS related changes					*vms-changes*
 
+Version 7
+- Improved low level char input (affects just console mode)
+
+Version 6.4 (2005 Oct 15)
+- GTKLIB and Vim build on IA64
+- colors in terminal mode
+- syntax highlighting in terminal mode
+- write problem fixed (extra CR)
+- ESC and ESC sequence recognition in terminal mode
+- make file changed to support new MMS version
+- env variable expansion in path corrected
+- printing problems corrected
+- help text added for case insensitive arguments
+
 Version 6.3 (2004 May 10)
 - Improved vms_read function
 - CTAGS v5.5.4 included

runtime/doc/os_win32.txt

@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 7.0aa.  Last change: 2004 Aug 31
+*os_win32.txt*  For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by George Reilly
@@ -192,7 +192,7 @@ A. In the GUI version, you can use the 'guifont' option.  Example: >
 Q. When I change the size of the console window with ':set lines=xx' or
    similar, the font changes! (Win95)
 A. You have the console font set to 'Auto' in Vim's (or your MS-DOS prompt's)
-   properties. This makes W95 guess (badly!) what font is best. Set an explicit
+   properties.  This makes W95 guess (badly!) what font is best.  Set an explicit
    font instead.
 
 Q. Why can't I paste into Vim when running Windows 95?
@@ -282,7 +282,7 @@ A. VisionFS can't handle certain dot (.) three letter extension file names.
 	dir > file.bat
 <
    The result is that the "dir" command updates the "file.bat~" file, instead
-   of creating a new "file.bat" file. This same behavior is exhibited in Vim
+   of creating a new "file.bat" file.  This same behavior is exhibited in Vim
    when editing an existing file named "foo.bat" because the default behavior
    of Vim is to create a temporary file with a '~' character appended to the
    name.  When the file is written, it winds up being deleted.
@@ -306,13 +306,13 @@ A. When using :! to run an external command, you can run it with "start": >
    To avoid this special treatment, use ":! start".
 
 Q. I'm using Win32s, and when I try to run an external command like "make",
-   Vim doesn't wait for it to finish! Help!
+   Vim doesn't wait for it to finish!  Help!
 A. The problem is that a 32-bit application (Vim) can't get notification from
-   Windows that a 16-bit application (your DOS session) has finished. Vim
+   Windows that a 16-bit application (your DOS session) has finished.  Vim
    includes a work-around for this, but you must set up your DOS commands to
-   run in a window, not full-screen. Unfortunately the default when you
-   install Windows is full-screen. To change this:
-   1) Start PIF editor (in the Main program group)
+   run in a window, not full-screen.  Unfortunately the default when you
+   install Windows is full-screen.  To change this:
+   1) Start PIF editor (in the Main program group).
    2) Open the file "_DEFAULT.PIF" in your Windows directory.
    3) Changes the display option from "Full Screen" to "Windowed".
    4) Save and exit.
@@ -321,10 +321,10 @@ A. The problem is that a 32-bit application (Vim) can't get notification from
 	:!dir C:\<CR>".
 <  You should see a DOS box window appear briefly with the directory listing.
 
-Q. I use Vim under Win32s and NT. In NT, I can define the console to default to
-   50 lines, so that I get a 80x50 shell when I ':sh'. Can I do the same in
+Q. I use Vim under Win32s and NT.  In NT, I can define the console to default to
+   50 lines, so that I get a 80x50 shell when I ':sh'.  Can I do the same in
    W3.1x, or am I stuck with 80x25?
-A. Edit SYSTEM.INI and add 'ScreenLines=50' to the [NonWindowsApp] section. DOS
+A. Edit SYSTEM.INI and add 'ScreenLines=50' to the [NonWindowsApp] section.  DOS
    prompts and external DOS commands will now run in a 50-line window.
 
  vim:tw=78:fo=tcq2:ts=8:ft=help:norl:

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 7.0aa.  Last change: 2005 Jan 26
+*pattern.txt*   For Vim version 7.0aa.  Last change: 2006 Mar 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -117,6 +117,14 @@ gD			Goto global Declaration.  When the cursor is on a
 			like "gd", except that the search for the keyword
 			always starts in line 1.  {not in Vi}
 
+							*1gd*
+1gd			Like "gd", but ignore matches inside a {} block that
+			ends before the cursor position. {not in Vi}
+
+							*1gD*
+1gD			Like "gD", but ignore matches inside a {} block that
+			ends before the cursor position. {not in Vi}
+
 							*CTRL-C*
 CTRL-C			Interrupt current (search) command.  Use CTRL-Break on
 			MS-DOS |dos-CTRL-Break|.
@@ -153,7 +161,7 @@ The offset gives the cursor position relative to the found match:
     s[-num]	[num] characters to the left of the start of the match
     b[+num]	[num] identical to s[+num] above (mnemonic: begin)
     b[-num]	[num] identical to s[-num] above (mnemonic: begin)
-    ;{pattern}  perform another searcn, see |//;|
+    ;{pattern}  perform another search, see |//;|
 
 If a '-' or '+' is given but [num] is omitted, a count of one will be used.
 When including an offset with 'e', the search becomes inclusive (the
@@ -248,9 +256,13 @@ switched off by setting the 's' flag in the 'shortmess' option.  The highlight
 method 'w' is used for this message (default: standout).
 
 							*search-range*
-You cannot limit the search command "/" to a certain range of lines.  A trick
-to do this anyway is to use the ":substitute" command with the 'c' flag.
-Example: >
+You can limit the search command "/" to a certain range of lines by including
+\%>l items.  For example, to match the word "limit" below line 199 and above
+line 300: >
+	/\%>199l\%<300llimit
+Also see |/\%>l|.
+
+Another way is to use the ":substitute" command with the 'c' flag.  Example: >
    :.,300s/Pattern//gc
 This command will search from the cursor position until line 300 for
 "Pattern".  At the match, you will be asked to type a character.  Type 'q' to
@@ -272,7 +284,7 @@ the "*" is under your right hand middle finger (search to the right and down).
 ==============================================================================
 2. The definition of a pattern		*search-pattern* *pattern* *[pattern]*
 					*regular-expression* *regexp* *Pattern*
-					*E76* *E361* *E363* *E383* *E476*
+					*E76* *E383* *E476*
 
 For starters, read chapter 27 of the user manual |usr_27.txt|.
 
@@ -382,7 +394,9 @@ More explanation and examples below, follow the links.
 |/\ze|	\ze	\ze	anything, sets end of match
 |/\%^|	\%^	\%^	beginning of file |/zero-width|		*E71*
 |/\%$|	\%$	\%$	end of file |/zero-width|
+|/\%V|	\%V	\%V	inside Visual area |/zero-width|
 |/\%#|	\%#	\%#	cursor position |/zero-width|
+|/\%'m|	\%'m	\%'m	mark m position |/zero-width|
 |/\%l|	\%23l	\%23l	in line 23 |/zero-width|
 |/\%c|	\%23c	\%23c	in column 23 |/zero-width|
 |/\%v|	\%23v	\%23v	in virtual column 23 |/zero-width|
@@ -522,11 +536,6 @@ An atom can be followed by an indication of how many times the atom can be
 matched and in what way.  This is called a multi.  See |/multi| for an
 overview.
 
-It is not possible to use a multi that can match more than one time after an
-atom that can match an empty string.  That's because this could result in an
-endless loop.  If you try it, you will get this error message: >
-	*, \+ or \{ operand could be empty
-<
 						*/star* */\star* *E56*
 *	(use \* when 'magic' is not set)
 	Matches 0 or more of the preceding atom, as many as possible.
@@ -577,7 +586,7 @@ endless loop.  If you try it, you will get this error message: >
 \{-}	matches 0 or more of the preceding atom, as few as possible
 	{Vi does not have any of these}
 
-	n and m are positive decimal numbers
+	n and m are positive decimal numbers or zero
 
 	If a "-" appears immediately after the "{", then a shortest match
 	first algorithm is used (see example below).  In particular, "\{-}" is
@@ -636,7 +645,7 @@ endless loop.  If you try it, you will get this error message: >
 	position: "\(foo\)\@!bar" will match "bar" in "foobar", because at the
 	position where "bar" matches, "foo" does not match.  To avoid matching
 	"foobar" you could use "\(foo\)\@!...bar", but that doesn't match a
-	bar at the start of a line. Use "\(foo\)\@<!bar".
+	bar at the start of a line.  Use "\(foo\)\@<!bar".
 
 							*/\@<=*
 \@<=	Matches with zero width if the preceding atom matches just before what
@@ -740,7 +749,7 @@ $	At end of pattern or in front of "\|" or "\)" ("|" or ")" after "\v"):
 
 							*/\>*
 \>	Matches the end of a word: The previous char is the last char of a
-	word. The 'iskeyword' option specifies what is a word character.
+	word.  The 'iskeyword' option specifies what is a word character.
 	|/zero-width|
 
 							*/\zs*
@@ -750,7 +759,7 @@ $	At end of pattern or in front of "\|" or "\)" ("|" or ")" after "\v"):
 		/^\s*\zsif
 <	matches an "if" at the start of a line, ignoring white space.
 	Can be used multiple times, the last one encountered in a matching
-	branch is used. Example: >
+	branch is used.  Example: >
 		/\(.\{-}\zsFab\)\{3}
 <	Finds the third occurrence of "Fab".
 	{not in Vi} {not available when compiled without the +syntax feature}
@@ -781,6 +790,11 @@ $	At end of pattern or in front of "\|" or "\)" ("|" or ")" after "\v"):
 	position after the first "VIM".
 	Searching from the end of the file backwards is easier!
 
+						*/\%V*
+\%V	Match inside the Visual area.  When Visual mode has already been
+	stopped match in the area that |gv| would reselect.
+	Only works for the current buffer.
+
 						*/\%#* *cursor-position*
 \%#	Matches with the cursor position.  Only works when matching in a
 	buffer displayed in a window. {not in Vi}
@@ -795,10 +809,24 @@ $	At end of pattern or in front of "\|" or "\)" ("|" or ")" after "\v"):
 <	When 'hlsearch' is set and you move the cursor around and make changes
 	this will clearly show when the match is updated or not.
 
+						*/\%'m* */\%<'m* */\%>'m*
+\%'m	Matches with the position of mark m.
+\%<'m	Matches before the position of mark m.
+\%>'m	Matches after the position of mark m.
+	Example, to highlight the text from mark 's to 'e: >
+		/.\%>'s.*\%<'e..
+<	Note that two dots are required to include mark 'e in the match.  That
+	is because "\%<'e" matches at the character before the 'e mark, and
+	since it's a |/zero-width| match it doesn't include that character.
+	{not in Vi}
+	WARNING: When the mark is moved after the pattern was used, the result
+	becomes invalid.  Vim doesn't automatically update the matches.
+	Similar to moving the cursor for "\%#" |/\%#|.
+
 						*/\%l* */\%>l* */\%<l*
 \%23l	Matches in a specific line.
-\%<23l	Matches above a specific line.
-\%>23l	Matches below a specific line.
+\%<23l	Matches above a specific line (lower line number).
+\%>23l	Matches below a specific line (higher line number).
 	These three can be used to match specific lines in a buffer.  The "23"
 	can be any line number.  The first line is 1. {not in Vi}
 	WARNING: When inserting or deleting lines Vim does not automatically
@@ -840,8 +868,8 @@ $	At end of pattern or in front of "\|" or "\)" ("|" or ")" after "\v"):
 	are halfway a Tab or other character that occupies more than one
 	screen character.  {not in Vi}
 	WARNING: When inserting or deleting text Vim does not automatically
-	update the matches.  This means Syntax highlighting quickly becomes
-	wrong.
+	update highlighted matches.  This means Syntax highlighting quickly
+	becomes wrong.
 	Example, to highlight the all characters after virtual column 72: >
 		/\%>72v.*
 <	When 'hlsearch' is set and you move the cursor around and make changes
@@ -935,7 +963,7 @@ x	A single character, with no special meaning, matches itself
 
 []	(with 'nomagic': \[])		*/[]* */\[]* */\_[]* */collection*
 \_[]
-	A collection. This is a sequence of characters enclosed in brackets.
+	A collection.  This is a sequence of characters enclosed in brackets.
 	It matches any single character in the collection.
 	Example		matches ~
 	[xyz]		any 'x', 'y' or 'z'
@@ -948,6 +976,10 @@ x	A single character, with no special meaning, matches itself
 	"\_[^ab]" matches the end-of-line and any character but "a" and "b".
 	This makes it Vi compatible: Without the "\_" or "\n" the collection
 	does not match an end-of-line.
+								*E769*
+	When the ']' is not there Vim will not give an error message but
+	assume no collection is used.  Useful to search for '['.  However, you
+	do get E769 for internal searching.
 
 	If the sequence begins with "^", it matches any single character NOT
 	in the collection: "[^xyz]" matches anything but 'x', 'y' and 'z'.
@@ -982,6 +1014,17 @@ x	A single character, with no special meaning, matches itself
 	  a list of at least one character, each of which is either '-', '.',
 	  '/', alphabetic, numeric, '_' or '~'.
 	  These items only work for 8-bit characters.
+							*/[[=* *[==]*
+	- An equivalence class.  This means that characters are matched that
+	  have almost the same meaning, e.g., when ignoring accents.  The form
+	  is:
+	  	[=a=]
+	  Currrently this is only implemented for latin1.  Also works for the
+	  latin1 characters in utf-8 and latin9.
+							*/[[.* *[..]*
+	- A collation element.  This currently simply accepts a single
+	  character in the form:
+	  	[.a.]
 							  */\]*
 	- To include a literal ']', '^', '-' or '\' in the collection, put a
 	  backslash before it: "[xyz\]]", "[\^xyz]", "[xy\-z]" and "[xyz\\]".
@@ -1148,14 +1191,23 @@ Finally, these constructs are unique to Perl:
 <		Instead of // any character can be used to mark the start and
 		end of the {pattern}.  Watch out for using special characters,
 		such as '"' and '|'.
+
 		{group} must exist at the moment this command is executed.
-		The match overrides the 'hlsearch' highlighting.
-		'ignorecase' does not apply, use |/\c| in the pattern to
-		ignore case.  Otherwise case is not ignored.
+
+		The {group} highlighting still applies when a character is
+		to be highlighted for 'hlsearch'.
+
 		Note that highlighting the last used search pattern with
 		'hlsearch' is used in all windows, while the pattern defined
 		with ":match" only exists in the current window.  It is kept
 		when switching to another buffer.
+
+		The |matchparen| plugin uses match highlighting, thus will
+		disable your ":match" command as soon as you move to a paren.
+
+		'ignorecase' does not apply, use |/\c| in the pattern to
+		ignore case.  Otherwise case is not ignored.
+
 		Another example, which highlights all characters in virtual
 		column 72 and more: >
 			:highlight rightMargin term=bold ctermfg=blue guifg=blue
@@ -1170,4 +1222,20 @@ Finally, these constructs are unique to Perl:
 :mat[ch] none
 		Clear a previously defined match pattern.
 
+
+:2mat[ch] {group} /{pattern}/
+:2mat[ch]
+:2mat[ch] none
+:3mat[ch] {group} /{pattern}/
+:3mat[ch]
+:3mat[ch] none
+		Just like |:match| above, but set a separate match.  Thus
+		there can be three matches active at the same time.  The match
+		with the lowest number has priority if several match at the
+		same position.
+		The ":3match" command is used by the |matchparen| plugin.  You
+		are suggested to use ":match" for manual matching and
+		":2match" for another plugin.
+
+
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/pi_paren.txt

@@ -0,0 +1,42 @@
+*pi_paren.txt*   For Vim version 7.0aa.  Last change: 2006 Mar 01
+
+
+		  VIM REFERENCE MANUAL    by Bram Moolenaar
+
+
+Highlighting matching parens			*matchparen*
+
+The functionality mentioned here is a |standard-plugin|.
+This plugin is only available if 'compatible' is not set.
+
+You can avoid loading this plugin by setting the "loaded_matchparen" variable: >
+	:let loaded_matchparen = 1
+
+The plugin installs CursorMoved autocommands to redefine the match
+highlighting.
+
+To disable the plugin after it was loaded use this command: >
+
+	:NoMatchParen
+
+And to enable it again: >
+
+	:DoMatchParen
+
+The highlighting used is MatchParen.  You can specify different colors with
+the ":highlight" command.  Example: >
+
+	:hi MatchParen ctermbg=blue guibg=lightblue
+
+The characters to be matched come from the 'matchpairs' option.  You can
+change the value to highlight different matches.  Note that not everything is
+possible.  For example, you can't highlight single or double quotes, because
+the start and end are equal.
+
+The syntax highlighting attributes are used.  When the cursor currently is not
+in a string or comment syntax item, then matches inside string and comment
+syntax items are ignored.  Any syntax items with "string" or "comment"
+somewhere in their name are considered string or comment items.
+
+==============================================================================
+ vim:tw=78:ts=8:ft=help:norl:

runtime/doc/pi_spec.txt

@@ -1,13 +1,13 @@
-*pi_spec.txt*   For Vim version 7.0aa.  Last change: 2002 Oct 29
+*pi_spec.txt*   For Vim version 7.0aa.  Last change: 2005 Oct 03
 
 by Gustavo Niemeyer ~
 
 This is a filetype plugin to work with rpm spec files.
 
 Currently, this Vim plugin allows you to easily update the %changelog
-section in RPM spec files. It will even create a section for you if it
-doesn't exist yet. If you've already inserted an entry today, it will
-give you the opportunity to just add a new item in today's entry. If you
+section in RPM spec files.  It will even create a section for you if it
+doesn't exist yet.  If you've already inserted an entry today, it will
+give you the opportunity to just add a new item in today's entry.  If you
 don't provide a format string (|spec_chglog_format|), it'll ask you an
 email address and build a format string by itself.
 
@@ -22,24 +22,24 @@ The spec_chglog plugin provides a map like the following:
 	:map <buffer> <LocalLeader>c <Plug>SpecChangelog
 
 It means that you may run the plugin inside a spec file by pressing
-your maplocalleader key (default is '\') plus 'c'. If you do not have
+your maplocalleader key (default is '\') plus 'c'.  If you do not have
 |spec_chglog_format| set, the plugin will ask you for an email address
 to use in this edit session.
 
-Everytime you run the plugin, it will check to see if the last entry
-in the changelog has been written today and by you. If it's the entry
-mathes, it will just insert a new changelog item, otherwise it will
-create a new changelog entry. If you are running with
-|spec_chglog_release_info| enabled, it will also check if the name, version
-and release matches. The plugin is smart enough to ask you if it should
-update the package release, if you have not done so.
+Every time you run the plugin, it will check to see if the last entry in the
+changelog has been written today and by you.  If the entry matches, it will
+just insert a new changelog item, otherwise it will create a new changelog
+entry.  If you are running with |spec_chglog_release_info| enabled, it will
+also check if the name, version and release matches.  The plugin is smart
+enough to ask you if it should update the package release, if you have not
+done so.
 
 Setting a map					*spec-setting-a-map*
 -------------
 
 As you should know, you can easily set a map to access any Vim command (or
-anything, for that matter). If you don't like the default map of
-<LocalLeader>c, you may just set up your own key. The following line
+anything, for that matter).  If you don't like the default map of
+<LocalLeader>c, you may just set up your own key.  The following line
 shows you how you could do this in your .vimrc file, mapping the plugin to
 the <F5> key:
 
@@ -57,16 +57,16 @@ This command will add a map only in the spec file buffers.
 The format string				*spec_chglog_format*
 -----------------
 
-You can easily customize how your spec file entry will look like. To do
+You can easily customize how your spec file entry will look like.  To do
 this just set the variable "spec_chglog_format" in your .vimrc file like
 this: >
 
 	let spec_chglog_format = "%a %b %d %Y My Name <my@email.com>"
 
-Note that "%a %b %d %Y" is the most used time format. If you don't provide
+Note that "%a %b %d %Y" is the most used time format.  If you don't provide
 a format string, when you run the SpecChangelog command for the first
 time, it will ask you an email address and build the |spec_chglog_format|
-variable for you. This way, you will only need to provide your email
+variable for you.  This way, you will only need to provide your email
 address once.
 
 To discover which format options you can use, take a look at the strftime()
@@ -76,7 +76,7 @@ Where to insert new items			*spec_chglog_prepend*
 -------------------------
 
 The plugin will usually insert new %changelog entry items (note that it's
-not the entry itself) after the existing ones. If you set the
+not the entry itself) after the existing ones.  If you set the
 spec_chglog_prepend variable >
 
 	let spec_chglog_prepend = 1
@@ -87,11 +87,11 @@ Inserting release info				*spec_chglog_release_info*
 ----------------------
 
 If you want, the plugin may automatically insert release information
-on each changelog entry. One advantage of turning this feature on is
+on each changelog entry.  One advantage of turning this feature on is
 that it may control if the release has been updated after the last
-change in the package or not. If you have not updated the package
+change in the package or not.  If you have not updated the package
 version or release, it will ask you if it should update the package
-release for you. To turn this feature on, just insert the following
+release for you.  To turn this feature on, just insert the following
 code in your .vimrc: >
 
 	let spec_chglog_release_info = 1

runtime/doc/pi_tar.txt

@@ -0,0 +1,40 @@
+*tar.txt*	Tar File Interface				Dec 21, 2005
+
+Author:  Charles E. Campbell, Jr.  <NdrOchip@ScampbellPfamily.AbizM>
+	  (remove NOSPAM from Campbell's email first)
+Copyright: The GPL (gnu public license) applies to	*tar-copyright*
+	   tarPlugin.vim, and pi_tar.txt.
+	   No warranty, express or implied.  Use At-Your-Own-Risk.
+
+==============================================================================
+1. Contents					*tar* *tar-contents*
+   1. Contents..................................................|tar-contents|
+   2. Usage.....................................................|tar-usage|
+   3. History...................................................|tar-history|
+
+==============================================================================
+2. Usage					*tar-usage* *tar-manual*
+
+   When one edits a *.tar file, this plugin will handle displaying a
+   contents page.  Select a file to edit by moving the cursor atop
+   the desired file, then hit the <return> key.  After editing, one may
+   also write to the file.  Currently, one may not make a new file in
+   tar archives via the plugin.
+
+==============================================================================
+3. History						*tar-history*
+   v6 Dec 21, 2005 * writing to files not in directories caused problems -
+                     fixed (pointed out by Christian Robinson)
+   v5 Nov 22, 2005 * report option workaround installed
+   v3 Sep 16, 2005 * handles writing files in an archive back to the
+                     archive
+      Oct 18, 2005 * <amatch> used instead of <afile> in autocmds
+      Oct 18, 2005 * handles writing to compressed archives
+      Nov 03, 2005 * handles writing tarfiles across a network using
+                     netrw#NetWrite()
+   v2              * converted to use Vim7's new autoload feature by
+                     Bram Moolenaar
+   v1 (original)   * Michael Toren (see http://michael.toren.net/code/)
+
+==============================================================================
+vim:tw=78:ts=8:ft=help

runtime/doc/pi_zip.txt

@@ -0,0 +1,44 @@
+*zip.txt*	Zip File Interface				Nov 28, 2005
+
+Author:  Charles E. Campbell, Jr.  <NdrOchip@ScampbellPfamily.AbizM>
+	  (remove NOSPAM from Campbell's email first)
+Copyright:    Copyright (C) 2005 Charles E. Campbell, Jr. {{{1 *zip-copyright*
+              Permission is hereby granted to use and distribute this code,
+	      with or without modifications, provided that this copyright
+	      notice is copied with it. Like anything else that's free,
+	      zip.vim, zipPlugin.vim, and pi_zip.txt are provided *as is*
+	      and it comes with no warranty of any kind, either expressed or
+	      implied. By using this plugin, you agree that in no event will
+	      the copyright holder be liable for any damages resulting from
+	      the use of this software.
+
+==============================================================================
+1. Contents					*zip* *zip-contents*
+   1. Contents..................................................|zip-contents|
+   2. Usage.....................................................|zip-usage|
+   3. History...................................................|zip-history|
+
+==============================================================================
+2. Usage					*zip-usage* *zip-manual*
+
+   When one edits a *.zip file, this plugin will handle displaying a
+   contents page.  Select a file to edit by moving the cursor atop
+   the desired file, then hit the <return> key.  After editing, one may
+   also write to the file.  Currently, one may not make a new file in
+   zip archives via the plugin.
+
+==============================================================================
+3. History					*zip-history*
+   v6 Dec 21, 2005 * writing to files not in directories caused problems -
+                     fixed (pointed out by Christian Robinson)
+   v5 Nov 22, 2005 * report option workaround installed
+   v3 Oct 18, 2005 * <amatch> used instead of <afile> in autocmds
+   v2 Sep 16, 2005 * silenced some commands (avoiding hit-enter prompt)
+                   * began testing under Windows; works thus far
+		   * filetype detection fixed
+      Nov 03, 2005 * handles writing zipfiles across a network using
+                     netrw#NetWrite()
+   v1 Sep 15, 2005 * Initial release, had browsing, reading, and writing
+
+==============================================================================
+vim:tw=78:ts=8:ft=help

runtime/doc/print.txt

@@ -1,4 +1,4 @@
-*print.txt*     For Vim version 7.0aa.  Last change: 2004 Jul 05
+*print.txt*     For Vim version 7.0aa.  Last change: 2005 Apr 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -32,7 +32,7 @@ used.
 			printer.
 
 			On MS-Windows a dialog is displayed to allow selection
-			of printer, paper size etc. To skip the dialog, use
+			of printer, paper size etc.  To skip the dialog, use
 			the [!].  In this case the printer defined by
 			'printdevice' is used, or, if 'printdevice' is empty,
 			the system default printer.
@@ -65,7 +65,7 @@ the current window's 'wrap' or 'linebreak' settings.  The "wrap" item in
 'printoptions' can be used to switch wrapping off.
 The current highlighting colors are used in the printout, with the following
 considerations:
-1) The normal background is always rendered as white (i.e. blank paper.)
+1) The normal background is always rendered as white (i.e. blank paper).
 2) White text or the default foreground is rendered as black, so that it shows
    up!
 3) If 'background' is "dark", then the colours are darkened to compensate for

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 7.0aa.  Last change: 2005 Jan 20
+*quickfix.txt*  For Vim version 7.0aa.  Last change: 2006 Feb 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -30,6 +30,11 @@ The idea is to save the error messages from the compiler in a file and use Vim
 to jump to the errors one by one.  You can examine each problem and fix it,
 without having to remember all the error messages.
 
+In Vim the quickfix commands are used more generally to find a list of
+positions in files.  For example, |:vimgrep| finds pattern matches.  You can
+use the positions in a script with the |getqflist()| function.  Thus you can
+do a lot more than the edit/compile/fix cycle!
+
 If you are using Manx's Aztec C compiler on the Amiga look here for how to use
 it with Vim: |quickfix-manx|.  If you are using another compiler you should
 save the error messages in a file and start Vim with "vim -q filename".  An
@@ -37,7 +42,19 @@ easy way to do this is with the |:make| command (see below).  The
 'errorformat' option should be set to match the error messages from your
 compiler (see |errorformat| below).
 
-The following quickfix commands can be used:
+						*location-list* *E776*
+A location list is similar to a quickfix list and contains a list of positions
+in files.  A location list is associated with a window and each window can
+have a separate location list.  A location list can be associated with only
+one window.  The location list is independent of the quickfix list.
+
+When a window with a location list is split, the new window gets a copy of the
+location list.  When there are no references to a location list, the location
+list is destroyed.
+
+The following quickfix commands can be used.  The location list commands are
+similar to the quickfix commands, replacing the 'c' prefix in the quickfix
+command with 'l'.
 
 							*:cc*
 :cc[!] [nr]		Display error [nr].  If [nr] is omitted, the same
@@ -51,18 +68,32 @@ The following quickfix commands can be used:
 			The 'switchbuf' settings are respected when jumping
 			to a buffer.
 
+							*:ll*
+:ll[!] [nr]		Same as ":cc", except the location list for the
+			current window is used instead of the quickfix list.
+
 							*:cn* *:cnext* *E553*
 :[count]cn[ext][!]	Display the [count] next error in the list that
 			includes a file name.  If there are no file names at
 			all, go to the [count] next error.  See |:cc| for
 			[!] and 'switchbuf'.
 
+							*:lne* *:lnext*
+:[count]lne[xt][!]	Same as ":cnext", except the location list for the
+			current window is used instead of the quickfix list.
+
 :[count]cN[ext][!]			*:cp* *:cprevious* *:cN* *:cNext*
 :[count]cp[revious][!]	Display the [count] previous error in the list that
 			includes a file name.  If there are no file names at
 			all, go to the [count] previous error.  See |:cc| for
 			[!] and 'switchbuf'.
 
+				
+:[count]lN[ext][!]			*:lp* *:lprevious* *:lN* *:lNext*
+:[count]lp[revious][!]	Same as ":cNext" and ":cprevious", except the location
+			list for the current window is used instead of the
+			quickfix list.
+
 							*:cnf* *:cnfile*
 :[count]cnf[ile][!]	Display the first error in the [count] next file in
 			the list that includes a file name.  If there are no
@@ -70,6 +101,10 @@ The following quickfix commands can be used:
 			the [count] next error.  See |:cc| for [!] and
 			'switchbuf'.
 
+							*:lnf* *:lnfile*
+:[count]lnf[ile][!]	Same as ":cnfile", except the location list for the
+			current window is used instead of the quickfix list.
+
 :[count]cNf[ile][!]			*:cpf* *:cpfile* *:cNf* *:cNfile*
 :[count]cpf[ile][!]	Display the last error in the [count] previous file in
 			the list that includes a file name.  If there are no
@@ -77,17 +112,34 @@ The following quickfix commands can be used:
 			the [count] previous error.  See |:cc| for [!] and
 			'switchbuf'.
 
+
+:[count]lNf[ile][!]			*:lpf* *:lpfile* *:lNf* *:lNfile*
+:[count]lpf[ile][!]	Same as ":cNfile" and ":cpfile", except the location
+			list for the current window is used instead of the
+			quickfix list.
+
 							*:crewind* *:cr*
 :cr[ewind][!] [nr]	Display error [nr].  If [nr] is omitted, the FIRST
 			error is displayed.  See |:cc|.
 
+							*:lrewind* *:lr*
+:lr[ewind][!] [nr]	Same as ":crewind", except the location list for the
+			current window is used instead of the quickfix list.
+
 							*:cfirst* *:cfir*
 :cfir[st][!] [nr]	Same as ":crewind".
 
+							*:lfirst* *:lfir*
+:lfir[st][!] [nr]	Same as ":lrewind".
+
 							*:clast* *:cla*
 :cla[st][!] [nr]	Display error [nr].  If [nr] is omitted, the LAST
 			error is displayed.  See |:cc|.
 
+							*:llast* *:lla*
+:lla[st][!] [nr]	Same as ":clast", except the location list for the
+			current window is used instead of the quickfix list.
+
 							*:cq* *:cquit*
 :cq[uit]		Quit Vim with an error code, so that the compiler
 			will not compile the same file again.
@@ -100,11 +152,31 @@ The following quickfix commands can be used:
 			name of the errorfile, the 'errorfile' option will
 			be set to [errorfile].  See |:cc| for [!].
 
-							*:cg* *:cgetfile*
-:cg[etfile][!] [errorfile]
+							*:lf* *:lfile*
+:lf[ile][!] [errorfile]	Same as ":cfile", except the location list for the
+			current window is used instead of the quickfix list.
+			You can not use the -q command-line option to set
+			the location list.
+
+		
+:cg[etfile][!] [errorfile]				*:cg* *:cgetfile*
 			Read the error file.  Just like ":cfile" but don't
 			jump to the first error.
 
+			
+:lg[etfile][!] [errorfile]				*:lg* *:lgetfile*
+			Same as ":cgetfile", except the location list for the
+			current window is used instead of the quickfix list.
+
+							*:caddf* *:caddfile*
+:caddf[ile] [errorfile]	Read the error file and add the errors from the
+			errorfile to the current quickfix list. If a quickfix
+			list is not present, then a new list is created.
+
+							*:laddf* *:laddfile*
+:laddf[ile] [errorfile]	Same as ":caddfile", except the location list for the
+			current window is used instead of the quickfix list.
+
 						*:cb* *:cbuffer* *E681*
 :cb[uffer] [bufnr]	Read the error list from the current buffer.
 			When [bufnr] is given it must be the number of a
@@ -113,11 +185,57 @@ The following quickfix commands can be used:
 			A range can be specified for the lines to be used.
 			Otherwise all lines in the buffer are used.
 
+						*:lb* *:lbuffer*
+:lb[uffer] [bufnr]	Same as ":cbuffer", except the location list for the
+			current window is used instead of the quickfix list.
+
+							*:caddb* *:caddbuffer*
+:caddb[uffer] [bufnr]	Read the error list from the current buffer and add
+			the errors to the current quickfix list.  If a
+			quickfix list is not present, then a new list is
+			created. Otherwise, same as ":cbuffer".
+
+							*:laddb* *:laddbuffer*
+:laddb[uffer] [bufnr]	Same as ":caddbuffer", except the location list for
+			the current window is used instead of the quickfix
+			list.
+
+							*:cex* *:cexpr* *E777*
+:cex[pr][!] {expr}	Create a quickfix list using the result of {expr} and
+			jump to the first error.  If {expr} is a String, then
+			each new-line terminated line in the String is
+			processed using 'errorformat' and the result is added
+			to the quickfix list.  If {expr} is a List, then each
+			String item in the list is processed and added to the
+			quickfix list.  Non String items in the List are
+			ignored. See |:cc|
+			for [!].
+			Examples: >
+				:cexpr system('grep -n xyz *')
+				:cexpr getline(1, '$')
+<
+							*:lex* *:lexpr*
+:lex[pr][!] {expr}	Same as ":cexpr", except the location list for the
+			current window is used instead of the quickfix list.
+
+							*:cad* *:caddexpr*
+:cad[dexpr][!] {expr}	Evaluate {expr} and add the resulting lines to the
+			current quickfix list. If a quickfix list is not
+			present, then a new list is created. The current
+			cursor position will not be changed. See |:cexpr| for
+			more information.
+			Example: >
+    :g/mypattern/caddexpr expand("%") . ":" . line(".") .  ":" . getline(".")
+<
+							*:lad* *:laddexpr*
+:lad[dexpr][!] {expr}	Same as ":caddexpr", except the location list for the
+			current window is used instead of the quickfix list.
+
 							*:cl* *:clist*
 :cl[ist] [from] [, [to]]
 			List all errors that are valid |quickfix-valid|.
 			If numbers [from] and/or [to] are given, the respective
-			range of errors is listed. A negative number counts
+			range of errors is listed.  A negative number counts
 			from the last error backwards, -1 being the last error.
 			The 'switchbuf' settings are respected when jumping
 			to a buffer.
@@ -125,12 +243,25 @@ The following quickfix commands can be used:
 :cl[ist]! [from] [, [to]]
 			List all errors.
 
+							*:lli* *:llist*
+:lli[st] [from] [, [to]]
+			Same as ":clist", except the location list for the
+			current window is used instead of the quickfix list.
+
+:lli[st]! [from] [, [to]]
+			List all the entries in the location list for the
+			current window.
+
 If you insert or delete lines, mostly the correct error location is still
 found because hidden marks are used.  Sometimes, when the mark has been
 deleted for some reason, the message "line changed" is shown to warn you that
 the error location may not be correct.  If you quit Vim and start again the
 marks are lost and the error locations may not be correct anymore.
 
+If vim is built with |+autocmd| support, two autocommands are available for
+running commands before and after a quickfix command (':make', ':grep' and so
+on) is executed. See |QuickFixCmdPre| and |QuickFixCmdPost| for details.
+
 =============================================================================
 2. The error window					*quickfix-window*
 
@@ -145,14 +276,28 @@ marks are lost and the error locations may not be correct anymore.
 			the current window.  It is not possible to open a
 			second quickfix window.
 
+							*:lop* *:lopen*
+:lop[en] [height]	Open a window to show the location list for the
+			current window. Works only when the location list for
+			the current window is present.  You can have more than
+			one location window opened at a time.  Otherwise, it
+			acts the same as ":copen".
+
 							*:ccl* *:cclose*
 :ccl[ose]		Close the quickfix window.
 
+							*:lcl* *:lclose*
+:lcl[ose]		Close the window showing the location list for the
+			current window.
+
 							*:cw* *:cwindow*
 :cw[indow] [height]	Open the quickfix window when there are recognized
 			errors.  If the window is already open and there are
 			no recognized errors, close the window.
 
+							*:lw* *:lwindow*
+:lw[indow] [height]	Same as ":cwindow", except use the window showing the
+			location list for the current window.
 
 Normally the quickfix window is at the bottom of the screen.  If there are
 vertical splits, it's at the bottom of the rightmost column of windows.  To
@@ -166,23 +311,28 @@ height manually (e.g., by dragging the status line above it with the mouse).
 
 In the quickfix window, each line is one error.  The line number is equal to
 the error number.  You can use ":.cc" to jump to the error under the cursor.
-Hitting the <CR> key or double-clicking the mouse on a line has the same
+Hitting the <Enter> key or double-clicking the mouse on a line has the same
 effect.  The file containing the error is opened in the window above the
 quickfix window.  If there already is a window for that file, it is used
 instead.  If the buffer in the used window has changed, and the error is in
 another file, jumping to the error will fail.  You will first have to make
 sure the window contains a buffer which can be abandoned.
+					*CTRL-W_<Enter>* *CTRL-W_<CR>*
+You can use CTRL-W <Enter> to open a new window and jump to the error there.
 
 When the quickfix window has been filled, two autocommand events are
 triggered.  First the 'filetype' option is set to "qf", which triggers the
-FileType event.  Then the BufReadPost event is triggered.  This can be used to
-perform some action on the listed errors.  Example: >
-	au BufReadPost quickfix  setlocal nomodifiable
-		\ | silent g/^/s//\=line(".")." "/
-		\ | setlocal modifiable
+FileType event.  Then the BufReadPost event is triggered, using "quickfix" for
+the buffer name.  This can be used to perform some action on the listed
+errors.  Example: >
+	au BufReadPost quickfix  setlocal modifiable
+		\ | silent exe 'g/^/s//\=line(".")." "/'
+		\ | setlocal nomodifiable
 This prepends the line number to each line.  Note the use of "\=" in the
 substitute string of the ":s" command, which is used to evaluate an
 expression.
+The BufWinEnter event is also triggered, again using "quickfix" for the buffer
+name.
 
 Note: Making changes in the quickfix window has no effect on the list of
 errors.  'modifiable' is off to avoid making changes.  If you delete or insert
@@ -191,6 +341,29 @@ If you really want to do this, you could write the contents of the quickfix
 window to a file and use ":cfile" to have it parsed and used as the new error
 list.
 
+						*location-list-window*
+The location list window displays the entries in a location list.  When you
+open a location list window, it is created below the current window and
+displays the location list for the current window.  The location list window
+is similar to the quickfix window, except that you can have more than one
+location list window open at a time. When you use a location list command in
+this window, the displayed location list is used.
+
+When you select a file from the location list window, the following steps are
+used to find a window to edit the file:
+
+1. If a window with the location list displayed in the location list window is
+   present, then the file is opened in that window.
+2. If the above step fails and if the file is already opened in another
+   window, then that window is used.
+3. If the above step fails then an existing window showing a buffer with
+   'buftype' not set is used.
+4. If the above step fails, then the file is edited in a new window.
+
+In all of the above cases, if the location list for the selected window is not
+yet set, then it is set to the location list displayed in the location list
+window.
+
 =============================================================================
 3. Using more than one list of errors			*quickfix-error-lists*
 
@@ -204,11 +377,19 @@ lists.  They set one of the existing error lists as the current one.
 			this [count] times.  When already at the oldest error
 			list, an error message is given.
 
+						*:lolder* *:lol*
+:lol[der] [count]	Same as ":colder", except use the location list for
+			the current window instead of the quickfix list.
+
 						*:cnewer* *:cnew* *E381*
 :cnew[er] [count]	Go to newer error list.  When [count] is given, do
 			this [count] times.  When already at the newest error
 			list, an error message is given.
 
+						*:lnewer* *:lnew*
+:lnew[er] [count]	Same as ":cnewer", except use the location list for
+			the current window instead of the quickfix list.
+
 When adding a new error list, it becomes the current list.
 
 When ":colder" has been used and ":make" or ":grep" is used to add a new error
@@ -220,24 +401,33 @@ lists, use ":cnewer 99" first.
 4. Using :make						*:make_makeprg*
 
 							*:mak* *:make*
-:mak[e][!] [arguments]	1. If the 'autowrite' option is on, write any changed
+:mak[e][!] [arguments]	1. If vim was built with |+autocmd|, all relevant
+			   |QuickFixCmdPre| autocommands are executed.
+			2. If the 'autowrite' option is on, write any changed
 			   buffers
-			2. An errorfile name is made from 'makeef'.  If
+			3. An errorfile name is made from 'makeef'.  If
 			   'makeef' doesn't contain "##", and a file with this
 			   name already exists, it is deleted.
-			3. The program given with the 'makeprg' option is
+			4. The program given with the 'makeprg' option is
 			   started (default "make") with the optional
 			   [arguments] and the output is saved in the
 			   errorfile (for Unix it is also echoed on the
 			   screen).
-			4. The errorfile is read using 'errorformat'.
-			5. If [!] is not given the first error is jumped to.
-			6. The errorfile is deleted.
-			7. You can now move through the errors with commands
+			5. The errorfile is read using 'errorformat'.
+			6. If [!] is not given the first error is jumped to.
+			7. The errorfile is deleted.
+			8. If vim was built with |+autocmd|, all relevant
+			   |QuickFixCmdPost| autocommands are executed.
+			9. You can now move through the errors with commands
 			   like |:cnext| and |:cprevious|, see above.
 			This command does not accept a comment, any "
 			characters are considered part of the arguments.
 
+							*:lmak* *:lmake*
+:lmak[e][!] [arguments]
+			Same as ":make", except the location list for the
+			current window is used instead of the quickfix list.
+
 The ":make" command executes the command given with the 'makeprg' option.
 This is done by passing the command to the shell given with the 'shell'
 option.  This works almost like typing
@@ -295,21 +485,32 @@ advantages are:
 5.1 using Vim's internal grep
 
 					*:vim* *:vimgrep* *E682* *E683*
-:vim[grep][!] /{pattern}/ {file} ...
+:vim[grep][!] /{pattern}/[g][j] {file} ...
 			Search for {pattern} in the files {file} ... and set
 			the error list to the matches.
-			{pattern} if a Vim search pattern.  Instead of
-			enclosing it in / any non-ID character |'isident'|
-			can be used, so long as it does not appear in
-			{pattern}.
-			'ignorecase' applies.  To overrule it use |/\c| to
-			ignore case or |/\C| to match case.  'smartcase' is
-			not used.
+			Without the 'g' flag each line is added only once.
+			With 'g' every match is added.
+
+			{pattern} is a Vim search pattern.  Instead of
+			enclosing it in / any non-ID character (see
+			|'isident'|) can be used, so long as it does not
+			appear in {pattern}.
+			'ignorecase' applies.  To overrule it put |/\c| in the
+			pattern to ignore case or |/\C| to match case.
+			'smartcase' is not used.
+
+			Without the 'j' flag Vim jumps to the first match.
+			With 'j' only the quickfix list is updated.
+			With the [!] any changes in the current buffer are
+			abandoned.
+
 			Every second or so the searched file name is displayed
 			to give you an idea of the progress made.
 			Examples: >
 				:vimgrep /an error/ *.c
 				:vimgrep /\<FileName\>/ *.h include/*
+				:vimgrep /myfunc/ **/*.c
+<			For the use of "**" see |starstar-wildcard|.
 
 :vim[grep][!] {pattern} {file} ...
 			Like above, but instead of enclosing the pattern in a
@@ -318,12 +519,25 @@ advantages are:
 			Example: >
 				:vimgrep Error *.c
 <
+							*:lv* *:lvimgrep*
+:lv[imgrep][!] /{pattern}/[g][j] {file} ...
+:lv[imgrep][!] {pattern} {file} ...
+			Same as ":vimgrep", except the location list for the
+			current window is used instead of the quickfix list.
+
 						*:vimgrepa* *:vimgrepadd*
-:vimgrepa[dd][!] [/]{pattern}[/] {file} ...
+:vimgrepa[dd][!] /{pattern}/[g][j] {file} ...
+:vimgrepa[dd][!] {pattern} {file} ...
 			Just like ":vimgrep", but instead of making a new list
 			of errors the matches are appended to the current
 			list.
 
+						*:lvimgrepa* *:lvimgrepadd*
+:lvimgrepa[dd][!] /{pattern}/[g][j] {file} ...
+:lvimgrepa[dd][!] {pattern} {file} ...
+			Same as ":vimgrepadd", except the location list for
+			the current window is used instead of the quickfix
+			list.
 
 5.2 External grep
 
@@ -339,6 +553,11 @@ id-utils) in a similar way to its compiler integration (see |:make| above).
 			When 'grepprg' is "internal" this works like
 			|:vimgrep|.  Note that the pattern needs to be
 			enclosed in separator characters then.
+
+							    *:lgr* *:lgrep*
+:lgr[ep][!] [arguments]	Same as ":grep", except the location list for the
+			current window is used instead of the quickfix list.
+
 							*:grepa* *:grepadd*
 :grepa[dd][!] [arguments]
 			Just like ":grep", but instead of making a new list of
@@ -352,19 +571,24 @@ id-utils) in a similar way to its compiler integration (see |:make| above).
 			":grepadd" jumps to the first error, which is not
 			allowed with |:bufdo|.
 
+							*:lgrepa* *:lgrepadd*
+:lgrepa[dd][!] [arguments]
+			Same as ":grepadd", except the location list for the
+			current window is used instead of the quickfix list.
+
 5.3 Setting up external grep
 
 If you have a standard "grep" program installed, the :grep command may work
-well with the defaults. The syntax is very similar to the standard command: >
+well with the defaults.  The syntax is very similar to the standard command: >
 
 	:grep foo *.c
 
-Will search all files with the .c extension for the substring "foo". The
+Will search all files with the .c extension for the substring "foo".  The
 arguments to :grep are passed straight to the "grep" program, so you can use
 whatever options your "grep" supports.
 
 By default, :grep invokes grep with the -n option (show file and line
-numbers). You can change this with the 'grepprg' option. You will need to set
+numbers).  You can change this with the 'grepprg' option.  You will need to set
 'grepprg' if:
 
 a)	You are using a program that isn't called "grep"
@@ -454,7 +678,7 @@ not "b:current_compiler".  What the command actually does is the following:
 - Execute ":runtime! compiler/{name}.vim".  The plugins are expected to set
   options with "CompilerSet" and set the "current_compiler" variable to the
   name of the compiler.
-- Delete the "CompilerSet user command.
+- Delete the "CompilerSet" user command.
 - Set "b:current_compiler" to the value of "current_compiler".
 - Without "!" the old value of "current_compiler" is restored.
 
@@ -490,8 +714,8 @@ stdin (standard input) will not be interactive.
 PYUNIT COMPILER						*compiler-pyunit*
 
 This is not actually a compiler, but a unit testing framework for the
-Python language. It is included into standard Python distribution
-starting from version 2.0. For older versions, you can get it from
+Python language.  It is included into standard Python distribution
+starting from version 2.0.  For older versions, you can get it from
 http://pyunit.sourceforge.net.
 
 When you run your tests with the help of the framework, possible errors
@@ -509,20 +733,20 @@ Also see http://vim.sourceforge.net/tip_view.php?tip_id=280.
 TEX COMPILER						*compiler-tex*
 
 Included in the distribution compiler for TeX ($VIMRUNTIME/compiler/tex.vim)
-uses make command if possible. If the compiler finds a file named "Makefile"
+uses make command if possible.  If the compiler finds a file named "Makefile"
 or "makefile" in the current directory, it supposes that you want to process
-your *TeX files with make, and the makefile does the right work. In this case
-compiler sets 'errorformat' for *TeX output and leaves 'makeprg' untouched. If
+your *TeX files with make, and the makefile does the right work.  In this case
+compiler sets 'errorformat' for *TeX output and leaves 'makeprg' untouched.  If
 neither "Makefile" nor "makefile" is found, the compiler will not use make.
 You can force the compiler to ignore makefiles by defining
 b:tex_ignore_makefile or g:tex_ignore_makefile variable (they are checked for
 existence only).
 
 If the compiler chose not to use make, it need to choose a right program for
-processing your input. If b:tex_flavor or g:tex_flavor (in this precedence)
+processing your input.  If b:tex_flavor or g:tex_flavor (in this precedence)
 variable exists, it defines TeX flavor for :make (actually, this is the name
 of executed command), and if both variables do not exist, it defaults to
-"latex". For example, while editing chapter2.tex \input-ed from mypaper.tex
+"latex".  For example, while editing chapter2.tex \input-ed from mypaper.tex
 written in AMS-TeX: >
 
 	:let b:tex_flavor = 'amstex'
@@ -532,16 +756,16 @@ written in AMS-TeX: >
 
 Note that you must specify a name of the file to process as an argument (to
 process the right file when editing \input-ed or \include-ed file; portable
-solution for substituting % for no arguments is welcome). This is not in the
+solution for substituting % for no arguments is welcome).  This is not in the
 semantics of make, where you specify a target, not source, but you may specify
 filename without extension ".tex" and mean this as "make filename.dvi or
 filename.pdf or filename.some_result_extension according to compiler".
 
 Note: tex command line syntax is set to usable both for MikTeX (suggestion
-by Srinath Avadhanula) and teTeX (checked by Artem Chuprina). Suggestion
+by Srinath Avadhanula) and teTeX (checked by Artem Chuprina).  Suggestion
 from |errorformat-LaTeX| is too complex to keep it working for different
 shells and OSes and also does not allow to use other available TeX options,
-if any. If your TeX doesn't support "-interaction=nonstopmode", please
+if any.  If your TeX doesn't support "-interaction=nonstopmode", please
 report it with different means to express \nonstopmode from the command line.
 
 =============================================================================
@@ -575,7 +799,7 @@ Basic items
 			column of the error, (1 <tab> == 1 character column))
 	%v		virtual column number (finds a number representing
 			screen column of the error (1 <tab> == 8 screen
-			columns)
+			columns))
 	%t		error type (finds a single character)
 	%n		error number (finds a number)
 	%m		error message (finds a string)
@@ -584,15 +808,15 @@ Basic items
 			uses the length for the column number)
 	%*{conv}	any scanf non-assignable conversion
 	%%		the single '%' character
+	%s		search text (finds a string)
 
-The "%f" conversion depends on the current 'isfname' setting.
+The "%f" conversion may depend on the current 'isfname' setting.  "~/" is
+expanded to the home directory and environment variables are expanded.
 
-The "%f" and "%m" conversions have to detect the end of the string.  They
-should be followed by a character that cannot be in the string.  Everything
-up to that character is included in the string.  But when the next character
-is a '%' or a backslash, "%f" will look for any 'isfname' character and "%m"
-finds anything.  If the "%f" or "%m" is at the end, everything up to the end
-of the line is included.
+The "%f" and "%m" conversions have to detect the end of the string.  This
+normally happens by matching following characters and items.  When nothing is
+following the rest of the line is matched.  If "%f" is followed by a '%' or a
+backslash, it will look for a sequence of 'isfname' characters.
 
 On MS-DOS, MS-Windows and OS/2 a leading "C:" will be included in "%f", even
 when using "%f:".  This means that a file name which is a single alphabetical
@@ -606,6 +830,13 @@ or >
 to indicate the column of the error.  This is to be used in a multi-line error
 message.  See |errorformat-javac| for a  useful example.
 
+The "%s" conversion specifies the text to search for to locate the error line.
+The text is used as a literal string.  The anchors "^" and "$" are added to
+the text to locate the error line exactly matching the search text and the
+text is prefixed with the "\V" atom to make it "very nomagic".  The "%s"
+conversion can be used to locate lines without a line number in the error
+output.  Like the output of the "grep" shell command.
+When the pattern is present the line number will not be used.
 
 Changing directory
 
@@ -613,7 +844,7 @@ The following uppercase conversion characters specify the type of special
 format strings.  At most one of them may be given as a prefix at the begin
 of a single comma-separated format pattern.
 Some compilers produce messages that consist of directory names that have to
-be prepended to each file name read by %f (example: GNU make). The following
+be prepended to each file name read by %f (example: GNU make).  The following
 codes can be used to scan these directory names; they will be stored in an
 internal directory stack.					*E379*
 	%D		"enter directory" format string; expects a following
@@ -621,7 +852,7 @@ internal directory stack.					*E379*
 	%X		"leave directory" format string; expects following %f
 
 When defining an "enter directory" or "leave directory" format, the "%D" or
-"%X" has to be given at the start of that substring. Vim tracks the directory
+"%X" has to be given at the start of that substring.  Vim tracks the directory
 changes and prepends the current directory to each erroneous file found with a
 relative path.  See |quickfix-directory-stack| for details, tips and
 limitations.
@@ -630,7 +861,7 @@ limitations.
 Multi-line messages				*errorformat-multi-line*
 
 It is possible to read the output of programs that produce multi-line
-messages, ie. error strings that consume more than one line.  Possible
+messages, i.e. error strings that consume more than one line.  Possible
 prefixes are:
 	%E		start of a multi-line error message
 	%W		start of a multi-line warning message
@@ -723,7 +954,7 @@ A call of |:clist| writes them accordingly with their correct filenames:
   9 a3.tt:67 col 3 warning: 's' already defined
 
 Unlike the other prefixes that all match against whole lines, %P, %Q and %O
-can be used to match several patterns in the same line. Thus it is possible
+can be used to match several patterns in the same line.  Thus it is possible
 to parse even nested files like in the following line:
   {"file1" {"file2" error1} error2 {"file3" error3 {"file4" error4 error5}}}
 The %O then parses over strings that do not contain any push/pop file name
@@ -733,11 +964,11 @@ information.  See |errorformat-LaTeX| for an extended example.
 Ignoring and using whole messages			*efm-ignore*
 
 The codes '+' or '-' can be combined with the uppercase codes above; in that
-case they have to precede the letter, eg. '%+A' or '%-G':
+case they have to precede the letter, e.g. '%+A' or '%-G':
 	%-		do not include the matching multi-line in any output
 	%+		include the whole matching line in the %m error string
 
-One prefix is only useful in combination with '+' or '-', namely %G. It parses
+One prefix is only useful in combination with '+' or '-', namely %G.  It parses
 over lines containing general information like compiler version strings or
 other headers that can be skipped.
 	%-G		ignore this message
@@ -752,7 +983,7 @@ with previous versions of Vim.  However, it is also possible to specify
 Since meta characters of the regular expression language can be part of
 ordinary matching strings or file names (and therefore internally have to
 be escaped), meta symbols have to be written with leading '%':
-	%\		the single '\' character. Note that this has to be
+	%\		the single '\' character.  Note that this has to be
 			escaped ("%\\") in ":set errorformat=" definitions.
 	%.		the single '.' character.
 	%#		the single '*'(!) character.
@@ -762,7 +993,7 @@ be escaped), meta symbols have to be written with leading '%':
 	%~		the single '~' character.
 When using character classes in expressions (see |/\i| for an overview),
 terms containing the "\+" quantifier can be written in the scanf() "%*"
-notation. Example: "%\\d%\\+" ("\d\+", "any number") is equivalent to "%*\\d".
+notation.  Example: "%\\d%\\+" ("\d\+", "any number") is equivalent to "%*\\d".
 Important note: The \(...\) grouping of sub-matches can not be used in format
 specifications because it is reserved for internal conversions.
 
@@ -848,19 +1079,19 @@ required for the set command.
 8. The directory stack				*quickfix-directory-stack*
 
 Quickfix maintains a stack for saving all used directories parsed from the
-make output. For GNU-make this is rather simple, as it always prints the
-absolute path of all directories it enters and leaves. Regardless if this is
+make output.  For GNU-make this is rather simple, as it always prints the
+absolute path of all directories it enters and leaves.  Regardless if this is
 done via a 'cd' command in the makefile or with the parameter "-C dir" (change
-to directory before reading the makefile). It may be useful to use the switch
+to directory before reading the makefile).  It may be useful to use the switch
 "-w" to force GNU-make to print out the working directory before and after
 processing.
 
 Maintaining the correct directory is more complicated if you don't use
-GNU-make. AIX-make for example doesn't print any information about its working
-directory. Then you need to enhance the makefile. In the makefile of LessTif
-there is a command which echoes "Making {target} in {dir}". The special
-problem here is that it doesn't print informations on leaving the directory
-and that it doesn't print the absolute path.
+GNU-make.  AIX-make for example doesn't print any information about its
+working directory.  Then you need to enhance the makefile.  In the makefile of
+LessTif there is a command which echoes "Making {target} in {dir}".  The
+special problem here is that it doesn't print informations on leaving the
+directory and that it doesn't print the absolute path.
 
 To solve the problem with relative paths and missing "leave directory"
 messages Vim uses following algorithm:
@@ -874,10 +1105,10 @@ messages Vim uses following algorithm:
 
 Additionally it is checked for every file, if it really exists in the
 identified directory.  If not, it is searched in all other directories of the
-directory stack (NOT the directory subtree!). If it is still not found, it is
+directory stack (NOT the directory subtree!).  If it is still not found, it is
 assumed that it is in Vim's current directory.
 
-There are limitation in this algorithm. This examples assume that make just
+There are limitation in this algorithm.  This examples assume that make just
 prints information about entering a directory in the form "Making all in dir".
 
 1) Assume you have following directories and files:
@@ -924,7 +1155,7 @@ Add
 to your 'errorformat' to handle the above output.
 
 Note that Vim doesn't check if the directory name in a "leave directory"
-messages is the current directory. This is why you could just use the message
+messages is the current directory.  This is why you could just use the message
 "Leaving dir".
 
 =============================================================================
@@ -986,7 +1217,7 @@ It should be easy to adopt the above LaTeX errorformat to any compiler output
 consisting of multi-line errors.
 
 The commands can be placed in a |vimrc| file or some other Vim script file,
-eg. a script containing LaTeX related stuff which is loaded only when editing
+e.g. a script containing LaTeX related stuff which is loaded only when editing
 LaTeX sources.
 Make sure to copy all lines of the example (in the given order), afterwards
 remove the comment lines.  For the '\' notation at the start of some lines see
@@ -1000,7 +1231,7 @@ remove the comment lines.  For the '\' notation at the start of some lines see
  :set efm=%E!\ LaTeX\ %trror:\ %m,
 	\%E!\ %m,
 <		Start of multi-line warning messages; the first two also
-		include the line number. Meaning of some regular expressions:
+		include the line number.  Meaning of some regular expressions:
 		  - "%.%#"  (".*")   matches a (possibly empty) string
 		  - "%*\\d" ("\d\+") matches a number >
 	\%+WLaTeX\ %.%#Warning:\ %.%#line\ %l%.%#,
@@ -1039,7 +1270,7 @@ remove the comment lines.  For the '\' notation at the start of some lines see
 		on a stack since the file apparently does not contain any
 		error: >
 	\%+O(%f)%r,
-<		Push a file name onto the stack. The name is given after '(': >
+<		Push a file name onto the stack.  The name is given after '(': >
 	\%+P(%f%r,
 	\%+P\ %\\=(%f%r,
 	\%+P%*[^()](%f%r,