updated for version 7.2-282

Contents

@@ -9,10 +9,10 @@ Vim		Vi IMproved.  A clone of the UNIX text editor Vi.  Very useful
 		messages, shows current file name in window title, on-line
 		help, rectangular cut/paste, etc., etc., etc...
 
-		Version 7.2b.  Also runs under UNIX, MSDOS and other systems.
-		vim72brt.tgz  contains the documentation and syntax files.
-		vim72bbin.tgz contains the binaries.
-		vim72bsrc.tgz contains the sources.
+		Version 7.2.  Also runs under UNIX, MSDOS and other systems.
+		vim72rt.tgz  contains the documentation and syntax files.
+		vim72bin.tgz contains the binaries.
+		vim72src.tgz contains the sources.
 		Author: Bram Moolenaar et al.
 
 

Filelist

@@ -285,6 +285,7 @@ SRC_DOS =	\
 		src/proto/os_win32.pro \
 		src/proto/os_mswin.pro \
 		src/testdir/Make_dos.mak \
+		src/testdir/Make_ming.mak \
 		src/testdir/dos.vim \
 		src/uninstal.c \
 		src/vim.def \
@@ -682,9 +683,7 @@ LANG_GEN = \
 		runtime/spell/??/main.aap \
 		runtime/spell/yi/README.txt \
 		runtime/spell/main.aap \
-		runtime/spell/cleanadd.vim \
 		runtime/spell/*.vim \
-		runtime/spell/fixdup \
 
 # generic language files, binary
 LANG_GEN_BIN = \

Makefile

@@ -69,7 +69,7 @@ all install uninstall tools config configure reconfig proto depend lint tags typ
 #    Before creating an archive first delete all backup files, *.orig, etc.
 
 MAJOR = 7
-MINOR = 2b
+MINOR = 2
 
 # Uncomment this line if the Win32s version is to be included.
 DOSBIN_S =  dosbin_s

README.txt

@@ -1,4 +1,4 @@
-README.txt for version 7.2b of Vim: Vi IMproved.
+README.txt for version 7.2 of Vim: Vi IMproved.
 
 
 WHAT IS VIM

README_ami.txt

@@ -1,4 +1,4 @@
-README_ami.txt for version 7.2b of Vim: Vi IMproved.
+README_ami.txt for version 7.2 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Amiga systems.
 See README.txt for general information about Vim.

README_amibin.txt

@@ -1,4 +1,4 @@
-README_amibin.txt for version 7.2b of Vim: Vi IMproved.
+README_amibin.txt for version 7.2 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_ami.txt" for installation instructions for the Amiga.

README_amisrc.txt

@@ -1,4 +1,4 @@
-README_amisrc.txt for version 7.2b of Vim: Vi IMproved.
+README_amisrc.txt for version 7.2 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_ami.txt" for installation instructions for the Amiga.

README_bindos.txt

@@ -1,19 +1,19 @@
-README_bindos.txt for version 7.2b of Vim: Vi IMproved.
+README_bindos.txt for version 7.2 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim70rt.zip).
+These files are in the runtime archive (vim72rt.zip).
 
 
 There are several binary distributions of Vim for the PC.  You would normally
 pick only one of them, but it's also possible to install several.
 These ones are available (the version number may differ):
-	vim70d16.zip	16 bit DOS version
-	vim70d32.zip	32 bit DOS version
-	vim70w32.zip	Windows 95/98/NT/etc. console version
-	gvim70.zip	Windows 95/98/NT/etc. GUI version
-	gvim70ole.zip	Windows 95/98/NT/etc. GUI version with OLE
-	gvim70_s.zip	Windows 3.1 GUI version
+	vim72d16.zip	16 bit DOS version
+	vim72d32.zip	32 bit DOS version
+	vim72w32.zip	Windows 95/98/NT/etc. console version
+	gvim72.zip	Windows 95/98/NT/etc. GUI version
+	gvim72ole.zip	Windows 95/98/NT/etc. GUI version with OLE
+	gvim72_s.zip	Windows 3.1 GUI version
 
-You MUST also get the runtime archive (vim70rt.zip).
-The sources are also available (vim70src.zip).
+You MUST also get the runtime archive (vim72rt.zip).
+The sources are also available (vim72src.zip).

README_dos.txt

@@ -1,4 +1,4 @@
-README_dos.txt for version 7.2b of Vim: Vi IMproved.
+README_dos.txt for version 7.2 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on MS-DOS and MS-Windows systems.
 See "README.txt" for general information about Vim.
@@ -47,13 +47,13 @@ These are the normal steps to install Vim from the .zip archives:
    Binary and runtime Vim archives are normally unpacked in the same location,
    on top of each other.
 
-2. Unpack the zip archives.  This will create a new directory "vim\vim70",
+2. Unpack the zip archives.  This will create a new directory "vim\vim72",
    in which all the distributed Vim files are placed.  Since the directory
    name includes the version number, it is unlikely that you overwrite
    existing files.
    Examples:
-	pkunzip -d gvim70.zip
-	unzip vim70w32.zip
+	pkunzip -d gvim72.zip
+	unzip vim72w32.zip
 
    You need to unpack the runtime archive and at least one of the binary
    archives.  When using more than one binary version, be careful not to
@@ -69,7 +69,7 @@ These are the normal steps to install Vim from the .zip archives:
    archive and follow the instructions in the documentation.
 
 3. Change to the new directory:
-	cd vim\vim70
+	cd vim\vim72
    Run the "install.exe" program.  It will ask you a number of questions about
    how you would like to have your Vim setup.  Among these are:
    - You can tell it to write a "_vimrc" file with your preferences in the
@@ -80,8 +80,8 @@ These are the normal steps to install Vim from the .zip archives:
      console or in a shell.  You can select one of the directories in your
      $PATH.  If you skip this, you can add Vim to the search path manually:
      The simplest is to add a line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim70
-	set path=%path%;D:\editors\vim\vim70
+	set path=%path%;C:\vim\vim72
+	set path=%path%;D:\editors\vim\vim72
    - Create entries for Vim on the desktop and in the Start menu.
 
 That's it!
@@ -94,7 +94,7 @@ Remarks:
   point to the top directory of your Vim files.  Example:
     set VIM=C:\editors\vim
   Vim version 6.0 will look for your vimrc file in $VIM, and for the runtime
-  files in $VIM/vim70.  See ":help $VIM" for more information.
+  files in $VIM/vim72.  See ":help $VIM" for more information.
 
 - To avoid confusion between distributed files of different versions and your
   own modified vim scripts, it is recommended to use this directory layout:
@@ -105,14 +105,14 @@ Remarks:
 	C:\vim\vimfiles\ftplugin\*.vim	Filetype plugins
 	C:\vim\...			Other files you made.
   Distributed files:
-	C:\vim\vim70\vim.exe		The Vim version 6.0 executable.
-	C:\vim\vim70\doc\*.txt		The version 6.0 documentation files.
-	C:\vim\vim70\bugreport.vim	A Vim version 6.0 script.
-	C:\vim\vim70\...		Other version 6.0 distributed files.
+	C:\vim\vim72\vim.exe		The Vim version 6.0 executable.
+	C:\vim\vim72\doc\*.txt		The version 6.0 documentation files.
+	C:\vim\vim72\bugreport.vim	A Vim version 6.0 script.
+	C:\vim\vim72\...		Other version 6.0 distributed files.
   In this case the $VIM environment variable would be set like this:
 	set VIM=C:\vim
-  Then $VIMRUNTIME will automatically be set to "$VIM\vim70".  Don't add
-  "vim70" to $VIM, that won't work.
+  Then $VIMRUNTIME will automatically be set to "$VIM\vim72".  Don't add
+  "vim72" to $VIM, that won't work.
 
 - You can put your Vim executable anywhere else.  If the executable is not
   with the other Vim files, you should set $VIM. The simplest is to add a line
@@ -136,8 +136,8 @@ Remarks:
      Select Properties.
   5. In the Program tab, change the "Cmdline" to add "/c" and the name of the
      Vim executable.  Examples:
-	C:\command.com /c C:\vim\vim70\vim.exe
-	C:\command.com /c D:\editors\vim\vim70\vim.exe
+	C:\command.com /c C:\vim\vim72\vim.exe
+	C:\command.com /c D:\editors\vim\vim72\vim.exe
   6. Select the font, window size, etc. that you like.  If this isn't
      possible, select "Advanced" in the Program tab, and deselect "MS-DOS
      mode".

README_extra.txt

@@ -1,4 +1,4 @@
-README_extra.txt for version 7.2b of Vim: Vi IMproved.
+README_extra.txt for version 7.2 of Vim: Vi IMproved.
 
 The extra archive of Vim is to be used in combination with the source archive
 (vim-7.0-src.tar.gz).  The extra archive is useless without it.

README_lang.txt

@@ -1,4 +1,4 @@
-README_lang.txt for version 7.2b of Vim: Vi IMproved.
+README_lang.txt for version 7.2 of Vim: Vi IMproved.
 
 This file contains files for non-English languages:
 - Translated messages.

README_mac.txt

@@ -1,4 +1,4 @@
-README_mac.txt for version 7.2b of Vim: Vi IMproved.
+README_mac.txt for version 7.2 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Macintosh systems.
 See "README.txt" for general information about Vim.

README_ole.txt

@@ -1,4 +1,4 @@
-README_ole.txt for version 7.2b of Vim: Vi IMproved.
+README_ole.txt for version 7.2 of Vim: Vi IMproved.
 
 This archive contains gvim.exe with OLE interface and VisVim.
 This version of gvim.exe can also load a number of interface dynamically (you

README_os2.txt

@@ -1,32 +1,32 @@
-README_os2.txt for version 7.2b of Vim: Vi IMproved.
+README_os2.txt for version 7.2 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on OS/2 systems.
 See "README.txt" for general information about Vim.
 
 
 NOTE: You will need two archives:
-  vim71rt.zip	contains the runtime files (same as for the PC version)
-  vim71os2.zip	contains the OS/2 executables
+  vim72rt.zip	contains the runtime files (same as for the PC version)
+  vim72os2.zip	contains the OS/2 executables
 
 1. Go to the directory where you want to put the Vim files.  Examples:
 	cd C:\
 	cd D:\editors
 
-2. Unpack the zip archives.  This will create a new directory "vim/vim71",
+2. Unpack the zip archives.  This will create a new directory "vim/vim72",
    in which all the distributed Vim files are placed.  Since the directory
    name includes the version number, it is unlikely that you overwrite
    existing files.
    Examples:
-	pkunzip -d vim71os2.zip
-	unzip vim71os2.zip
+	pkunzip -d vim72os2.zip
+	unzip vim72os2.zip
 
    After you unpacked the files, you can still move the whole directory tree
    to another location.
 
 3. Add the directory where vim.exe is to your path.  The simplest is to add a
    line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim71
-	set path=%path%;D:\editors\vim\vim71
+	set path=%path%;C:\vim\vim72
+	set path=%path%;D:\editors\vim\vim72
 
 That's it!
 
@@ -41,10 +41,10 @@ Extra remarks:
 	C:\vim\_viminfo			Dynamic info for 'viminfo'.
 	C:\vim\...			Other files you made.
   Distributed files:
-	C:\vim\vim71\vim.exe		The Vim version 7.1 executable.
-	C:\vim\vim71\doc\*.txt		The version 7.1 documentation files.
-	C:\vim\vim71\bugreport.vim	A Vim version 7.1 script.
-	C:\vim\vim71\...		Other version 7.1 distributed files.
+	C:\vim\vim72\vim.exe		The Vim version 7.1 executable.
+	C:\vim\vim72\doc\*.txt		The version 7.1 documentation files.
+	C:\vim\vim72\bugreport.vim	A Vim version 7.1 script.
+	C:\vim\vim72\...		Other version 7.1 distributed files.
   In this case the $VIM environment variable would be set like this:
 	set VIM=C:\vim
 

README_os390.txt

@@ -1,4 +1,4 @@
-README_os_390.txt for version 7.2b of Vim: Vi IMproved.
+README_os_390.txt for version 7.2 of Vim: Vi IMproved.
 
 Welcome to the OS/390 Unix port of VIM.
 

README_src.txt

@@ -1,4 +1,4 @@
-README_src.txt for version 7.2b of Vim: Vi IMproved.
+README_src.txt for version 7.2 of Vim: Vi IMproved.
 
 The source archive contains the files needed to compile Vim on Unix systems.
 It is packed for Unix systems (NL line separator).  It is also used for other

README_srcdos.txt

@@ -1,8 +1,8 @@
-README_srcdos.txt for version 7.2b of Vim: Vi IMproved.
+README_srcdos.txt for version 7.2 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim70rt.zip).
+These files are in the runtime archive (vim72rt.zip).
 
 
 The DOS source archive contains the files needed to compile Vim on MS-DOS or

README_unix.txt

@@ -1,4 +1,4 @@
-README_unix.txt for version 7.2b of Vim: Vi IMproved.
+README_unix.txt for version 7.2 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Unix systems.
 See "README.txt" for general information about Vim.

README_vms.txt

@@ -1,4 +1,4 @@
-README_vms.txt for version 7.2b of Vim: Vi IMproved.
+README_vms.txt for version 7.2 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on VMS systems.
 See "README.txt" in the runtime archive for information about Vim.

README_w32s.txt

@@ -1,4 +1,4 @@
-README_w32s.txt for version 7.2b of Vim: Vi IMproved.
+README_w32s.txt for version 7.2 of Vim: Vi IMproved.
 
 This archive contains the gvim.exe that was specifically compiled for use in
 the Win32s subsystem in MS-Windows 3.1 and 3.11.

nsis/gvim.nsi

@@ -22,7 +22,7 @@
 !define HAVE_NLS
 
 !define VER_MAJOR 7
-!define VER_MINOR 2b
+!define VER_MINOR 2
 
 # ----------- No configurable settings below this line -----------
 

runtime/autoload/netrw.vim

@@ -1,7 +1,7 @@
 " netrw.vim: Handles file transfer and remote directory listing across
 "            AUTOLOAD SECTION
-" Date:		Jul 12, 2008
-" Version:	127
+" Date:		Aug 08, 2008
+" Version:	132
 " Maintainer:	Charles E Campbell, Jr <NdrOchip@ScampbellPfamily.AbizM-NOSPAM>
 " GetLatestVimScripts: 1075 1 :AutoInstall: netrw.vim
 " Copyright:    Copyright (C) 1999-2008 Charles E. Campbell, Jr. {{{1
@@ -27,7 +27,7 @@ if !exists("s:NOTE")
  let s:WARNING = 1
  let s:ERROR   = 2
 endif
-let g:loaded_netrw = "v127"
+let g:loaded_netrw = "v132"
 
 " sanity checks
 if v:version < 700
@@ -76,7 +76,13 @@ if !exists("g:netrw_ftp_cmd")
   let g:netrw_ftp_cmd	= "ftp"
 endif
 if !exists("g:netrw_http_cmd")
- if executable("curl")
+ if executable("elinks")
+  let g:netrw_http_cmd = "elinks"
+  let g:netrw_http_xcmd= "-dump >"
+ elseif executable("links")
+  let g:netrw_http_cmd = "links"
+  let g:netrw_http_xcmd= "-dump >"
+ elseif executable("curl")
   let g:netrw_http_cmd	= "curl -o"
  elseif executable("wget")
   let g:netrw_http_cmd	= "wget -q -O"
@@ -359,6 +365,7 @@ endif
 if !exists("g:netrw_tmpfile_escape")
  let g:netrw_tmpfile_escape= ' &;'
 endif
+let s:netrw_map_escape = "<|\n\r\\\<C-V>\""
 
 " BufEnter event ignored by decho when following variable is true
 "  Has a side effect that doau BufReadPost doesn't work, so
@@ -712,15 +719,16 @@ fun! netrw#NetRead(mode,...)
 "     call Decho("read via ftp+.netrc (method #2)")
      let netrw_fname= b:netrw_fname
      call s:SaveBufVars()|new|call s:RestoreBufVars()
+     let filtbuf= bufnr("%")
      setlocal ff=unix
-     exe "put ='".g:netrw_ftpmode."'"
-"     call Decho("filter input: ".getline('.'))
+     put =g:netrw_ftpmode
+"     call Decho("filter input: ".getline(line("$")))
      if exists("g:netrw_ftpextracmd")
-      exe "put ='".g:netrw_ftpextracmd."'"
-"      call Decho("filter input: ".getline('.'))
+      put =g:netrw_ftpextracmd
+"      call Decho("filter input: ".getline(line("$")))
      endif
-     exe "put ='".'get \"'.netrw_fname.'\" '.tmpfile."'"
-"     call Decho("filter input: ".getline('.'))
+     call setline(line("$")+1,'get "'.netrw_fname.'" '.tmpfile)
+"     call Decho("filter input: ".getline(line("$")))
      if exists("g:netrw_port") && g:netrw_port != ""
 "      call Decho("executing: %!".g:netrw_ftp_cmd." -i ".shellescape(g:netrw_machine." ".g:netrw_port,1))
       exe s:netrw_silentxfer."%!".g:netrw_ftp_cmd." -i ".shellescape(g:netrw_machine." ".g:netrw_port,1)
@@ -735,7 +743,12 @@ fun! netrw#NetRead(mode,...)
       call netrw#ErrorMsg(s:ERROR,getline(1),4)
       let &debug    = debugkeep
      endif
-     call s:SaveBufVars()|bd!|call s:RestoreBufVars()
+     call s:SaveBufVars()
+     bd!
+     if bufname("%") == "" && line("$") == 1 && getline("$") == ""
+      q!
+     endif
+     call s:RestoreBufVars()
      let result           = s:NetrwGetFile(readcmd, tmpfile, b:netrw_method)
      let b:netrw_lastfile = choice
 
@@ -746,6 +759,7 @@ fun! netrw#NetRead(mode,...)
 "    call Decho("read via ftp+mipf (method #3)")
     let netrw_fname= escape(b:netrw_fname,g:netrw_fname_escape)
     call s:SaveBufVars()|new|call s:RestoreBufVars()
+    let filtbuf= bufnr("%")
     setlocal ff=unix
     if exists("g:netrw_port") && g:netrw_port != ""
      put ='open '.g:netrw_machine.' '.g:netrw_port
@@ -770,7 +784,7 @@ fun! netrw#NetRead(mode,...)
 "     call Decho("filter input: ".getline('.'))
     endif
     if exists("g:netrw_ftpextracmd")
-     exe "put ='".g:netrw_ftpextracmd."'"
+     put =g:netrw_ftpextracmd
 "     call Decho("filter input: ".getline('.'))
     endif
     put ='get \"'.netrw_fname.'\" '.tmpfile
@@ -820,15 +834,20 @@ fun! netrw#NetRead(mode,...)
      return
     endif
 
-    if match(b:netrw_fname,"#") == -1
-     " using g:netrw_http_cmd (usually wget or curl)
+    if match(b:netrw_fname,"#") == -1 || exists("g:netrw_http_xcmd")
+     " using g:netrw_http_cmd (usually elinks, links, curl, wget, or fetch)
 "     call Decho('using '.g:netrw_http_cmd.' (# not in b:netrw_fname<'.b:netrw_fname.">)")
-"     call Decho("exe ".s:netrw_silentxfer."!".g:netrw_http_cmd." ".shellescape(tmpfile,1)." ".shellescape("http://".g:netrw_machine.netrw_fname,1))
-     exe s:netrw_silentxfer."!".g:netrw_http_cmd." ".shellescape(tmpfile,1)." ".shellescape("http://".g:netrw_machine.b:netrw_fname,1)
+     if exists("g:netrw_http_xcmd")
+"      call Decho("exe ".s:netrw_silentxfer."!".g:netrw_http_cmd." ".shellescape("http://".g:netrw_machine.b:netrw_fname,1)." ".g:netrw_http_xcmd." ".shellescape(tmpfile,1))
+      exe s:netrw_silentxfer."!".g:netrw_http_cmd." ".shellescape("http://".g:netrw_machine.b:netrw_fname,1)." ".g:netrw_http_xcmd." ".shellescape(tmpfile,1)
+     else
+"      call Decho("exe ".s:netrw_silentxfer."!".g:netrw_http_cmd." ".shellescape(tmpfile,1)." ".shellescape("http://".g:netrw_machine.b:netrw_fname,1))
+      exe s:netrw_silentxfer."!".g:netrw_http_cmd." ".shellescape(tmpfile,1)." ".shellescape("http://".g:netrw_machine.b:netrw_fname,1)
+     endif
      let result = s:NetrwGetFile(readcmd, tmpfile, b:netrw_method)
 
     else
-     " wget/curl plus a jump to an in-page marker (ie. http://abc/def.html#aMarker)
+     " wget/curl/fetch plus a jump to an in-page marker (ie. http://abc/def.html#aMarker)
 "     call Decho(("wget/curl plus jump (# in b:netrw_fname<".b:netrw_fname.">)")
      let netrw_html= substitute(b:netrw_fname,"#.*$","","")
      let netrw_tag = substitute(b:netrw_fname,"^.*#","","")
@@ -1084,14 +1103,14 @@ fun! netrw#NetWrite(...) range
     new
 "    call Decho("filter input window#".winnr())
     setlocal ff=unix
-    exe "put ='".g:netrw_ftpmode."'"
-"    call Decho("filter input: ".getline('.'))
+    put =g:netrw_ftpmode
+"    call Decho("filter input: ".getline('$'))
     if exists("g:netrw_ftpextracmd")
-     exe "put ='".g:netrw_ftpextracmd."'"
-"     call Decho("filter input: ".getline('.'))
+     put =g:netrw_ftpextracmd
+"     call Decho("filter input: ".getline("$"))
     endif
-    exe "put ='".'put \"'.tmpfile.'\" \"'.netrw_fname.'\"'."'"
-"    call Decho("filter input: ".getline('.'))
+    call setline(line("$")+1,'put "'.tmpfile.'" "'.netrw_fname.'"')
+"    call Decho("filter input: ".getline("$"))
     if exists("g:netrw_port") && g:netrw_port != ""
 "     call Decho("executing: %!".g:netrw_ftp_cmd." -i ".shellescape(g:netrw_machine,1)." ".shellescape(g:netrw_port,1))
      exe s:netrw_silentxfer."%!".g:netrw_ftp_cmd." -i ".shellescape(g:netrw_machine,1)." ".shellescape(g:netrw_port,1)
@@ -1276,10 +1295,11 @@ fun! netrw#NetSource(...)
    let i= 1
    while i <= a:0
     call netrw#NetRead(3,a:{i})
-"    call Decho("s:netread_tmpfile<".s:netrw_tmpfile.">")
+"    call Decho("(netrw#NetSource) s:netread_tmpfile<".s:netrw_tmpfile.">")
     if s:FileReadable(s:netrw_tmpfile)
-"     call Decho("exe so ".s:netrw_tmpfile)
-     exe "so ".s:netrw_tmpfile
+"     call Decho("(netrw#NetSource) exe so ".fnameescape(s:netrw_tmpfile))
+     exe "so ".fnameescape(s:netrw_tmpfile)
+"     call Decho("(netrw#NetSource) delete(".s:netrw_tmpfile.")")
      call delete(s:netrw_tmpfile)
      unlet s:netrw_tmpfile
     else
@@ -1654,6 +1674,7 @@ endfun
 fun! s:BrowserMaps(islocal)
 "  call Dfunc("s:BrowserMaps(islocal=".a:islocal.") b:netrw_curdir<".b:netrw_curdir.">")
   if a:islocal
+"   call Decho("make local maps")
    nnoremap <buffer> <silent> <cr>	:call netrw#LocalBrowseCheck(<SID>NetrwBrowseChgDir(1,<SID>NetrwGetWord()))<cr>
    nnoremap <buffer> <silent> -		:exe "norm! 0"<bar>call netrw#LocalBrowseCheck(<SID>NetrwBrowseChgDir(1,'../'))<cr>
    nnoremap <buffer> <silent> a		:call <SID>NetrwHide(1)<cr>
@@ -1709,23 +1730,25 @@ fun! s:BrowserMaps(islocal)
    if s:didstarstar || !mapcheck("<s-up>","n")
     nnoremap <buffer> <silent> <s-up>	:Pexplore<cr>
    endif
+   let mapsafecurdir = escape(b:netrw_curdir, s:netrw_map_escape)
    if g:netrw_mousemaps == 1
     nnoremap <buffer> <silent> <leftmouse>   <leftmouse>:call <SID>NetrwLeftmouse(1)<cr>
     nnoremap <buffer> <silent> <middlemouse> <leftmouse>:call <SID>NetrwPrevWinOpen(1)<cr>
     nnoremap <buffer> <silent> <s-leftmouse> <leftmouse>:call <SID>NetrwMarkFile(1,<SID>NetrwGetWord())<cr>
-    exe 'nnoremap <buffer> <silent> <rightmouse>  <leftmouse>:call <SID>NetrwLocalRm("'.b:netrw_curdir.'")<cr>'
-    exe 'vnoremap <buffer> <silent> <rightmouse>  <leftmouse>:call <SID>NetrwLocalRm("'.b:netrw_curdir.'")<cr>'
+    exe 'nnoremap <buffer> <silent> <rightmouse>  <leftmouse>:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
+    exe 'vnoremap <buffer> <silent> <rightmouse>  <leftmouse>:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
    endif
-   exe 'nnoremap <buffer> <silent> <del>	:call <SID>NetrwLocalRm("'.b:netrw_curdir.'")<cr>'
-   exe 'vnoremap <buffer> <silent> <del>	:call <SID>NetrwLocalRm("'.b:netrw_curdir.'")<cr>'
-   exe 'nnoremap <buffer> <silent> D		:call <SID>NetrwLocalRm("'.b:netrw_curdir.'")<cr>'
-   exe 'vnoremap <buffer> <silent> D		:call <SID>NetrwLocalRm("'.b:netrw_curdir.'")<cr>'
-   exe 'nnoremap <buffer> <silent> R		:call <SID>NetrwLocalRename("'.b:netrw_curdir.'")<cr>'
-   exe 'vnoremap <buffer> <silent> R		:call <SID>NetrwLocalRename("'.b:netrw_curdir.'")<cr>'
+   exe 'nnoremap <buffer> <silent> <del>	:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
+   exe 'vnoremap <buffer> <silent> <del>	:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
+   exe 'nnoremap <buffer> <silent> D		:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
+   exe 'vnoremap <buffer> <silent> D		:call <SID>NetrwLocalRm("'.mapsafecurdir.'")<cr>'
+   exe 'nnoremap <buffer> <silent> R		:call <SID>NetrwLocalRename("'.mapsafecurdir.'")<cr>'
+   exe 'vnoremap <buffer> <silent> R		:call <SID>NetrwLocalRename("'.mapsafecurdir.'")<cr>'
    exe 'nnoremap <buffer> <silent> <Leader>m	:call <SID>NetrwMakeDir("")<cr>'
    nnoremap <buffer> <F1>		:he netrw-quickhelp<cr>
 
   else " remote
+"   call Decho("make remote maps")
    call s:RemotePathAnalysis(b:netrw_curdir)
    nnoremap <buffer> <silent> <cr>	:call <SID>NetrwBrowse(0,<SID>NetrwBrowseChgDir(0,<SID>NetrwGetWord()))<cr>
    nnoremap <buffer> <silent> <c-l>	:call <SID>NetrwRefresh(0,<SID>NetrwBrowseChgDir(0,'./'))<cr>
@@ -1774,21 +1797,25 @@ fun! s:BrowserMaps(islocal)
    if !hasmapto('<Plug>NetrwRefresh')
     nmap <buffer> <c-l> <Plug>NetrwRefresh
    endif
+
+   let mapsafepath     = escape(s:path, s:netrw_map_escape)
+   let mapsafeusermach = escape(s:user.s:machine, s:netrw_map_escape)
+
    nnoremap <buffer> <silent> <Plug>NetrwRefresh		:call <SID>NetrwRefresh(0,<SID>NetrwBrowseChgDir(0,'./'))<cr>
    if g:netrw_mousemaps == 1
     nnoremap <buffer> <silent> <leftmouse>   <leftmouse>:call <SID>NetrwLeftmouse(0)<cr>
     nnoremap <buffer> <silent> <middlemouse> <leftmouse>:call <SID>NetrwPrevWinOpen(0)<cr>
     nnoremap <buffer> <silent> <s-leftmouse> <leftmouse>:call <SID>NetrwMarkFile(0,<SID>NetrwGetWord())<cr>
-    exe 'nnoremap <buffer> <silent> <rightmouse> <leftmouse>:call <SID>NetrwRemoteRm("'.s:user.s:machine.'","'.s:path.'")<cr>'
-    exe 'vnoremap <buffer> <silent> <rightmouse> <leftmouse>:call <SID>NetrwRemoteRm("'.s:user.s:machine.'","'.s:path.'")<cr>'
+    exe 'nnoremap <buffer> <silent> <rightmouse> <leftmouse>:call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
+    exe 'vnoremap <buffer> <silent> <rightmouse> <leftmouse>:call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
    endif
-   exe 'nnoremap <buffer> <silent> <del>	:call <SID>NetrwRemoteRm("'.s:user.s:machine.'","'.s:path.'")<cr>'
-   exe 'vnoremap <buffer> <silent> <del>	:call <SID>NetrwRemoteRm("'.s:user.s:machine.'","'.s:path.'")<cr>'
-   exe 'nnoremap <buffer> <silent> d	:call <SID>NetrwMakeDir("'.s:user.s:machine.'")<cr>'
-   exe 'nnoremap <buffer> <silent> D	:call <SID>NetrwRemoteRm("'.s:user.s:machine.'","'.s:path.'")<cr>'
-   exe 'vnoremap <buffer> <silent> D	:call <SID>NetrwRemoteRm("'.s:user.s:machine.'","'.s:path.'")<cr>'
-   exe 'nnoremap <buffer> <silent> R	:call <SID>NetrwRemoteRename("'.s:user.s:machine.'","'.s:path.'")<cr>'
-   exe 'vnoremap <buffer> <silent> R	:call <SID>NetrwRemoteRename("'.s:user.s:machine.'","'.s:path.'")<cr>'
+   exe 'nnoremap <buffer> <silent> <del>	:call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
+   exe 'vnoremap <buffer> <silent> <del>	:call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
+   exe 'nnoremap <buffer> <silent> d	:call <SID>NetrwMakeDir("'.mapsafeusermach.'")<cr>'
+   exe 'nnoremap <buffer> <silent> D	:call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
+   exe 'vnoremap <buffer> <silent> D	:call <SID>NetrwRemoteRm("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
+   exe 'nnoremap <buffer> <silent> R	:call <SID>NetrwRemoteRename("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
+   exe 'vnoremap <buffer> <silent> R	:call <SID>NetrwRemoteRename("'.mapsafeusermach.'","'.mapsafepath.'")<cr>'
    nnoremap <buffer> <F1>			:he netrw-quickhelp<cr>
   endif
   call s:SetRexDir(a:islocal,b:netrw_curdir)
@@ -1842,7 +1869,7 @@ fun! s:NetrwBookmarkDir(chg,curdir)
    " change to the bookmarked directory
 "   call Decho("(user: <B>) change to the bookmarked directory")
    if exists("g:NETRW_BOOKMARKDIR_{v:count}")
-    exe "e ".g:NETRW_BOOKMARKDIR_{v:count}
+    exe "e ".fnameescape(g:NETRW_BOOKMARKDIR_{v:count})
    else
     echomsg "Sorry, bookmark#".v:count." doesn't exist!"
    endif
@@ -2340,8 +2367,8 @@ fun! s:NetrwGetBuffer(islocal,dirname)
 "    let v:errmsg= "" " Decho
     let escdirname= fnameescape(dirname)
 "    call Decho("  errmsg<".v:errmsg."> bufnr(".escdirname.")=".bufnr(escdirname)."<".bufname(bufnr(escdirname)).">")
-"    call Decho('  exe silent! keepalt file '.fnameescape(escdirname))
-    exe 'silent! keepalt file '.fnameescape(escdirname)
+"    call Decho('  exe silent! keepalt file '.escdirname)
+    exe 'silent! keepalt file '.escdirname
 "    call Decho("  errmsg<".v:errmsg."> bufnr(".escdirname.")=".bufnr(escdirname)."<".bufname(bufnr(escdirname)).">")
    endif
 "   call Decho("  named enew buffer#".bufnr("%")."<".bufname("%").">")
@@ -3273,7 +3300,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
      if starpat == 1
       " starpat=1: Explore *//pattern  (current directory only search for files containing pattern)
 "      call Decho("starpat=".starpat.": build *//pattern list")
-      exe "vimgrep /".pattern."/gj ".b:netrw_curdir."/*"
+      exe "vimgrep /".pattern."/gj ".fnameescape(b:netrw_curdir)."/*"
       let w:netrw_explore_list = map(getqflist(),'bufname(v:val.bufnr)')
       if &hls | let keepregslash= s:ExplorePatHls(pattern) | endif
 
@@ -3707,6 +3734,17 @@ endfun
 "                  of whatever may happen to be under the cursor at that
 "                  moment.  When the mouse and gui are available,
 "                  shift-leftmouse may also be used to mark files.
+"
+"  Creates two lists
+"    s:netrwmarkfilelist    -- holds complete paths to all marked files
+"    s:netrwmarkfilelist_#  -- holds list of marked files in current-buffer's directory (#==bufnr())
+"
+"  Creates a marked file match string
+"    s:netrwmarfilemtch_#   -- used with 2match to display marked files
+"
+"  Creates a buffer version of islocal
+"    b:netrw_islocal
+"
 fun! s:NetrwMarkFile(islocal,fname)
 "  call Dfunc("s:NetrwMarkFile(islocal=".a:islocal." fname<".a:fname.">)")
   let curbufnr= bufnr("%")
@@ -3715,15 +3753,16 @@ fun! s:NetrwMarkFile(islocal,fname)
    " markfile list exists
 "   call Decho("starting s:netrwmarkfilelist_{curbufnr}<".string(s:netrwmarkfilelist_{curbufnr}).">")
 "   call Decho("starting s:netrwmarkfilemtch_{curbufnr}<".s:netrwmarkfilemtch_{curbufnr}.">")
+   let b:netrw_islocal= a:islocal
 
    if index(s:netrwmarkfilelist_{curbufnr},a:fname) == -1
-    " append filename to local-directory markfilelist
+    " append filename to buffer's markfilelist
 "    call Decho("append filename<".a:fname."> to local markfilelist_".curbufnr."<".string(s:netrwmarkfilelist_{curbufnr}).">")
     call add(s:netrwmarkfilelist_{curbufnr},a:fname)
     let s:netrwmarkfilemtch_{curbufnr}= s:netrwmarkfilemtch_{curbufnr}.'\|\<'.escape(a:fname,g:netrw_markfileesc."'".g:netrw_markfileesc."'").'\>'
 
    else
-    " remove filename from local markfilelist
+    " remove filename from buffer's markfilelist
 "    call Decho("remove filename<".a:fname."> from local markfilelist_".curbufnr."<".string(s:netrwmarkfilelist_{curbufnr}).">")
     call filter(s:netrwmarkfilelist_{curbufnr},'v:val != a:fname')
     if s:netrwmarkfilelist_{curbufnr} == []
@@ -3826,7 +3865,7 @@ fun! s:NetrwMarkFileCompress(islocal)
         let fname= shellescape(s:ComposePath(curdir,fname))
        endif
       else
-       let fname= shellescape(b:netrw_curdir.fname)
+       let fname= shellescape(b:netrw_curdir.fname,1)
       endif
       if executable(exe)
        if a:islocal
@@ -3886,7 +3925,7 @@ fun! s:NetrwMarkFileCopy(islocal)
   if      a:islocal &&  s:netrwmftgt_islocal
    " Copy marked files, local directory to local directory
 "   call Decho("copy from local to local")
-   let args= join(map(copy(s:netrwmarkfilelist_{bufnr('%')}),"b:netrw_curdir.\"/\".shellescape(v:val)"))
+   let args= join(map(deepcopy(s:netrwmarkfilelist_{bufnr('%')}),"shellescape(b:netrw_curdir.\"/\".v:val)"))
 "   call Decho("system(".g:netrw_localcopycmd." ".args." ".shellescape(s:netrwmftgt).")")
    call system(s:WinPath(g:netrw_localcopycmd)." ".args." ".shellescape(s:netrwmftgt))
 
@@ -3914,7 +3953,7 @@ fun! s:NetrwMarkFileCopy(islocal)
    if isdirectory(tmpdir)
     exe "keepjumps lcd ".fnameescape(tmpdir)
     call netrw#NetrwObtain(a:islocal,s:netrwmarkfilelist_{bufnr('%')},tmpdir)
-    let localfiles= map(copy(s:netrwmarkfilelist_{bufnr('%')}),'substitute(v:val,"^.*/","","")')
+    let localfiles= map(deepcopy(s:netrwmarkfilelist_{bufnr('%')}),'substitute(v:val,"^.*/","","")')
     call s:NetrwUpload(localfiles,s:netrwmftgt)
     if getcwd() == tmpdir
      for fname in s:netrwmarkfilelist_{bufnr('%')}
@@ -3957,24 +3996,21 @@ endfun
 fun! s:NetrwMarkFileDiff(islocal)
 "  call Dfunc("s:NetrwMarkFileDiff(islocal=".a:islocal.") b:netrw_curdir<".b:netrw_curdir.">")
   let curbufnr= bufnr("%")
-  if exists("s:netrwmarkfilelist_{curbufnr}")
 
+  if exists("s:netrwmarkfilelist_{curbufnr}")
    let cnt    = 0
    let curdir = b:netrw_curdir
    for fname in s:netrwmarkfilelist
     let cnt= cnt + 1
-    if !a:islocal
-     let fname= curdir.fname
-    endif
     if cnt == 1
-"     call Decho("diffthis: ".fname)
-     exe "e ".fname
+"     call Decho("diffthis: fname<".fname.">")
+     exe "e ".fnameescape(fname)
      diffthis
     elseif cnt == 2 || cnt == 3
      vsplit
      wincmd l
 "     call Decho("diffthis: ".fname)
-     exe "e ".fname
+     exe "e ".fnameescape(fname)
      diffthis
     else
      break
@@ -3982,6 +4018,7 @@ fun! s:NetrwMarkFileDiff(islocal)
    endfor
    call s:NetrwUnmarkList(curbufnr,curdir)
   endif
+
 "  call Dret("s:NetrwMarkFileDiff")
 endfun
 
@@ -3995,17 +4032,7 @@ fun! s:NetrwMarkFileEdit(islocal)
   let curbufnr = bufnr("%")
   if exists("s:netrwmarkfilelist_{curbufnr}")
    call s:SetRexDir(a:islocal,curdir)
-   if a:islocal && g:netrw_keepdir
-    " use complete paths if its local and keepdir enabled
-    let flist= ""
-    for fname in s:netrwmarkfilelist
-"     let flist= flist." ".s:ComposePath(curdir,fname)
-     let flist= flist." ".fname
-    endfor
-   else
-"    let flist= substitute(escape(join(s:netrwmarkfilelist_{curbufnr},"\t"),' '),"\t",' ','g')
-    let flist= substitute(escape(join(s:netrwmarkfilelist,"\t"),' '),"\t",' ','g')
-   endif
+   let flist= join(map(deepcopy(s:netrwmarkfilelist), "fnameescape(v:val)"))
    " unmark markedfile list
 "   call s:NetrwUnmarkList(curbufnr,curdir)
    call s:NetrwUnmarkAll()
@@ -4138,17 +4165,11 @@ endfun
 fun! s:NetrwMarkFileGrep(islocal)
 "  call Dfunc("s:NetrwMarkFileGrep(islocal=".a:islocal.")")
   let svpos    = netrw#NetrwSavePosn()
-  let curdir   = b:netrw_curdir
   let curbufnr = bufnr("%")
 
   if exists("s:netrwmarkfilelist")
 "  call Decho("s:netrwmarkfilelist".string(s:netrwmarkfilelist).">")
-   let netrwmarkfilelist= ""
-   for fname in s:netrwmarkfilelist
-"    call Decho("fname<".fname.">")
-    let fname             = escape(substitute(fname,"[\"']","","g")," ")
-    let netrwmarkfilelist = netrwmarkfilelist." ".fname
-   endfor
+   let netrwmarkfilelist= join(map(deepcopy(s:netrwmarkfilelist), "fnameescape(v:val)"))
    call s:NetrwUnmarkAll()
 
    " ask user for pattern
@@ -4295,7 +4316,7 @@ fun! s:NetrwMarkFilePrint(islocal)
     1split
     " the autocmds will handle both local and remote files
 "    call Decho("exe silent e ".escape(fname,' '))
-    exe "silent e ".escape(fname,' ')
+    exe "silent e ".fnameescape(fname)
 "    call Decho("hardcopy")
     hardcopy
     q
@@ -4419,21 +4440,11 @@ fun! s:NetrwMarkFileTag(islocal)
 
   if exists("s:netrwmarkfilelist")
 "   call Decho("s:netrwmarkfilelist".string(s:netrwmarkfilelist).">")
-   if a:islocal && g:netrw_keepdir
-    let netrwmarkfilelist= ""
-    for fname in s:netrwmarkfilelist
-"     let netrwmarkfilelist= netrwmarkfilelist." ".s:ComposePath(curdir,fname)
-     let netrwmarkfilelist= netrwmarkfilelist." ".fname
-    endfor
-   else
-    let netrwmarkfilelist= string(s:netrwmarkfilelist)
-    let netrwmarkfilelist= substitute(netrwmarkfilelist,'[[\],]','','g')
-   endif
+   let netrwmarkfilelist= join(map(deepcopy(s:netrwmarkfilelist), "shellescape(v:val,".!a:islocal.")"))
    call s:NetrwUnmarkAll()
 
    if a:islocal
     if executable(g:netrw_ctags)
-     call map(netrwmarkfilelist,"shellescape(v:val)")
 "     call Decho("call system(".g:netrw_ctags." ".netrwmarkfilelist.")")
      call system(g:netrw_ctags." ".netrwmarkfilelist)
     else
@@ -4447,7 +4458,7 @@ fun! s:NetrwMarkFileTag(islocal)
     e tags
     let path= substitute(curdir,'^\(.*\)/[^/]*$','\1/','')
 "    call Decho("curdir<".curdir."> path<".path.">")
-    exe '%s/\t\(\S\+\)\t/\t'.escape(path,'/').'\1\t/e'
+    exe '%s/\t\(\S\+\)\t/\t'.escape(path,"/\n\r\\").'\1\t/e'
     wq!
    endif
    2match none
@@ -4758,20 +4769,22 @@ fun! netrw#NetrwObtain(islocal,fname,...)
   endif
 "  call Decho("tgtdir<".tgtdir.">")
 
-  if a:islocal
-   " obtain a file from b:netrw_curdir to getcwd()
-"   call Decho("obtain a local file from ".b:netrw_curdir." to ".tgtdir
+  if b:netrw_islocal
+   " obtain a file from local b:netrw_curdir to (local) tgtdir
+"   call Decho("obtain a file from local ".b:netrw_curdir." to ".tgtdir)
    if exists("b:netrw_curdir") && getcwd() != b:netrw_curdir
     let topath= s:ComposePath(tgtdir,"")
     if (has("win32") || has("win95") || has("win64") || has("win16"))
      " transfer files one at time
+"     call Decho("transfer files one at a time")
      for fname in fnamelist
 "      call Decho("system(".g:netrw_localcopycmd." ".shellescape(fname)." ".shellescape(topath).")")
       call system(g:netrw_localcopycmd." ".shellescape(fname)." ".shellescape(topath))
      endfor
     else
      " transfer files with one command
-     let filelist= join(map(copy(fname),"shellescape(v:val)"))
+"     call Decho("transfer files with one command")
+     let filelist= join(map(deepcopy(fnamelist),"shellescape(v:val)"))
 "     call Decho("system(".g:netrw_localcopycmd." ".filelist." ".shellescape(topath).")")
      call system(g:netrw_localcopycmd." ".filelist." ".shellescape(topath))
     endif
@@ -4782,7 +4795,8 @@ fun! netrw#NetrwObtain(islocal,fname,...)
    endif
 
   else
-"   call Decho("obtain a remote file from ".b:netrw_curdir." to ".tgtdir)
+   " obtain files from remote b:netrw_curdir to local tgtdir
+"   call Decho("obtain a file from remote ".b:netrw_curdir." to ".tgtdir)
    if type(a:fname) == 1
     call s:SetupNetrwStatusLine('%f %h%m%r%=%9*Obtaining '.a:fname)
    endif
@@ -4801,7 +4815,7 @@ fun! netrw#NetrwObtain(islocal,fname,...)
     else
      let path= ""
     endif
-    let filelist= join(map(copy(fnamelist),'shellescape(g:netrw_machine.":".path.v:val,1))'))
+    let filelist= join(map(deepcopy(fnamelist),'shellescape(g:netrw_machine.":".path.v:val,1)'))
 "    call Decho("exe ".s:netrw_silentxfer."!".g:netrw_scp_cmd.shellescape(useport,1)." ".filelist." ".shellescape(tgtdir,1))
     exe s:netrw_silentxfer."!".g:netrw_scp_cmd.shellescape(useport,1)." ".filelist." ".shellescape(tgtdir,1)
 
@@ -4812,7 +4826,7 @@ fun! netrw#NetrwObtain(islocal,fname,...)
      let tmpbufnr= bufnr("%")
      setlocal ff=unix
      if exists("g:netrw_ftpmode") && g:netrw_ftpmode != ""
-      exe "put ='".g:netrw_ftpmode."'"
+      put =g:netrw_ftpmode
 "      call Decho("filter input: ".getline('$'))
      endif
 
@@ -4822,7 +4836,7 @@ fun! netrw#NetrwObtain(islocal,fname,...)
      endif
 
      if exists("g:netrw_ftpextracmd")
-      exe "put ='".g:netrw_ftpextracmd."'"
+      put =g:netrw_ftpextracmd
 "      call Decho("filter input: ".getline('$'))
      endif
      for fname in fnamelist
@@ -4880,12 +4894,12 @@ fun! netrw#NetrwObtain(islocal,fname,...)
     endif
 
     if exists("g:netrw_ftpextracmd")
-     exe "put ='".g:netrw_ftpextracmd."'"
+     put =g:netrw_ftpextracmd
 "     call Decho("filter input: ".getline('$'))
     endif
 
     if exists("g:netrw_ftpextracmd")
-     exe "put ='".g:netrw_ftpextracmd."'"
+     put =g:netrw_ftpextracmd
 "     call Decho("filter input: ".getline('$'))
     endif
     for fname in fnamelist
@@ -5053,15 +5067,13 @@ fun! s:NetrwUpload(fname,tgt,...)
    " handle uploading a single file using NetWrite
 "   call Decho("handle uploading a single file via NetWrite")
    1split
-   let efname= escape(a:fname,g:netrw_fname_escape)
-"   call Decho("exe e ".efname)
-   exe "e ".efname
+"   call Decho("exe e ".fnameescape(a:fname))
+   exe "e ".fnameescape(a:fname)
 "   call Decho("now locally editing<".expand("%").">, has ".line("$")." lines")
    if a:tgt =~ '/$'
     let wfname= substitute(a:fname,'^.*/','','')
-    let wfname= escape(a:tgt.wfname,g:netrw_fname_escape)
 "    call Decho("exe w! ".fnameescape(wfname))
-    exe "w! ".fnameescape(wfname)
+    exe "w! ".fnameescape(a:tgt.wfname)
    else
 "    call Decho("writing local->remote: exe w ".fnameescape(a:tgt))
     exe "w ".fnameescape(a:tgt)
@@ -5075,8 +5087,8 @@ fun! s:NetrwUpload(fname,tgt,...)
    let curdir= getcwd()
    if a:tgt =~ '^scp:'
     exe "keepjumps silent lcd ".fnameescape(fromdir)
-    let filelist= copy(s:netrwmarkfilelist_{bufnr('%')})
-    let args    = join(map(filelist,"shellescape(v:val)"))
+    let filelist= deepcopy(s:netrwmarkfilelist_{bufnr('%')})
+    let args    = join(map(filelist,"shellescape(v:val, 1)"))
     if exists("g:netrw_port") && g:netrw_port != ""
      let useport= " ".g:netrw_scpport." ".g:netrw_port
     else
@@ -5097,11 +5109,11 @@ fun! s:NetrwUpload(fname,tgt,...)
      silent keepjumps new
 "     call Decho("filter input window#".winnr())
 
-     exe "put ='".g:netrw_ftpmode."'"
+     put =g:netrw_ftpmode
 "     call Decho("filter input: ".getline('$'))
 
      if exists("g:netrw_ftpextracmd")
-      exe "put ='".g:netrw_ftpextracmd."'"
+      put =g:netrw_ftpextracmd
 "      call Decho("filter input: ".getline('$'))
      endif
 
@@ -5166,7 +5178,7 @@ fun! s:NetrwUpload(fname,tgt,...)
      endif
 
      if exists("g:netrw_ftpextracmd")
-      exe "put ='".g:netrw_ftpextracmd."'"
+      put =g:netrw_ftpextracmd
 "      call Decho("filter input: ".getline('$'))
      endif
 
@@ -5210,7 +5222,7 @@ fun! s:NetrwPreview(path) range
   call s:NetrwSafeOptions()
   if has("quickfix")
    if !isdirectory(a:path)
-    exe (g:netrw_preview? "vert " : "")."pedit ".escape(a:path,g:netrw_fname_escape)
+    exe (g:netrw_preview? "vert " : "")."pedit ".fnameescape(a:path)
    elseif !exists("g:netrw_quiet")
     call netrw#ErrorMsg(s:WARNING,"sorry, cannot preview a directory such as <".a:path.">",38)
    endif
@@ -6027,8 +6039,8 @@ fun! s:NetrwRemoteListing()
    let listcmd= s:MakeSshCmd(g:netrw_list_cmd)
 "   call Decho("listcmd<".listcmd."> (using g:netrw_list_cmd)")
    if g:netrw_scp_cmd =~ '^pscp'
-"    call Decho("1: exe silent r! ".listcmd.s:path)
-    exe "silent r! ".listcmd.s:path
+"    call Decho("1: exe silent r! ".shellescape(listcmd.s:path, 1))
+    exe "silent r! ".listcmd.shellescape(s:path, 1)
     " remove rubbish and adjust listing format of 'pscp' to 'ssh ls -FLa' like
     g/^Listing directory/d
     g/^d[-rwx][-rwx][-rwx]/s+$+/+e
@@ -6286,7 +6298,7 @@ fun! s:NetrwRemoteFtpCmd(path,listcmd)
     put ='cd \"'.a:path.'\"'
    endif
    if exists("g:netrw_ftpextracmd")
-    exe "put ='".g:netrw_ftpextracmd."'"
+    put =g:netrw_ftpextracmd
 "    call Decho("filter input: ".getline('.'))
    endif
    call setline(line("$")+1,a:listcmd)
@@ -6320,7 +6332,7 @@ fun! s:NetrwRemoteFtpCmd(path,listcmd)
     put ='cd \"'.a:path.'\"'
    endif
    if exists("g:netrw_ftpextracmd")
-    exe "put ='".g:netrw_ftpextracmd."'"
+    put =g:netrw_ftpextracmd
 "    call Decho("filter input: ".getline('.'))
    endif
    call setline(line("$")+1,a:listcmd)
@@ -6669,7 +6681,7 @@ fun! s:LocalBrowseShellCmdRefresh()
    if bufwinnr(ibuf) == -1 && index(buftablist,ibuf) == -1
     " wipe out any non-displaying netrw buffer
 "    call Decho("wiping  buf#".ibuf,"<".bufname(ibuf).">")
-    exe "silent! bd ".ibuf
+    exe "silent! bd ".fnameescape(ibuf)
     call remove(s:netrw_browselist,ibl)
 "    call Decho("browselist=".string(s:netrw_browselist))
     continue
@@ -6860,7 +6872,7 @@ fun! s:NetrwLocalRename(path) range
       let newname = substitute(oldname,subfrom,subto,'')
      endif
     endif
-    let ret= rename(oldname,newname)
+    call rename(oldname,newname)
    endfor
    2match none
    unlet s:netrwmarkfilelist_{bufnr("%")}
@@ -6891,7 +6903,7 @@ fun! s:NetrwLocalRename(path) range
     let newname= input("Moving ".oldname." to : ",substitute(oldname,'/*$','','e'))
     call inputrestore()
 
-    let ret= rename(oldname,newname)
+    call rename(oldname,newname)
 "   call Decho("renaming <".oldname."> to <".newname.">")
 
     let ctr= ctr + 1
@@ -7570,22 +7582,24 @@ fun! s:SetRexDir(islocal,dirname)
 "  call Dfunc("s:SetRexDir(islocal=".a:islocal." dirname<".a:dirname.">)")
   " set up Rex and leftmouse-double-click
   if a:islocal
-   exe 'com! Rexplore call s:NetrwRexplore(1,"'.a:dirname.'")'
+   exe 'com! Rexplore call s:NetrwRexplore(1,"'.escape(a:dirname,'"\').'")'
    if g:netrw_retmap
     silent! unmap <2-leftmouse>
     if !hasmapto("<Plug>NetrwReturn")
      nmap <unique> <silent> <2-leftmouse>	<Plug>NetrwReturn
     endif
-    exe 'nnoremap <silent> <Plug>NetrwReturn :call <SID>NetrwRexplore(1,"'.a:dirname.'")<cr>'
+    let dir = escape(a:dirname, s:netrw_map_escape)
+    exe 'nnoremap <silent> <Plug>NetrwReturn :call <SID>NetrwRexplore(1,"'.dir.'")<cr>'
    endif
   else
-   exe 'com! Rexplore call s:NetrwRexplore(0,"'.a:dirname.'")'
+   exe 'com! Rexplore call s:NetrwRexplore(0,"'.escape(a:dirname,'"\').'")'
    if g:netrw_retmap
     silent! unmap <2-leftmouse>
     if !hasmapto("<Plug>NetrwReturn")
      nmap <unique> <silent> <2-leftmouse>	<Plug>NetrwReturn
     endif
-    exe 'nnoremap <silent> <Plug>NetrwReturn :call <SID>NetrwRexplore(0,"'.a:dirname.'")<cr>'
+    let dir = escape(a:dirname, s:netrw_map_escape)
+    exe 'nnoremap <silent> <Plug>NetrwReturn :call <SID>NetrwRexplore(0,"'.dir.'")<cr>'
    endif
   endif
 "  call Dret("s:SetRexDir")

runtime/autoload/tar.vim

@@ -1,7 +1,7 @@
 " tar.vim: Handles browsing tarfiles
 "            AUTOLOAD PORTION
-" Date:			Jul 12, 2008
-" Version:		19 + changes by Bram
+" Date:			Aug 08, 2008
+" Version:		23 + modifications by Bram
 " Maintainer:	Charles E Campbell, Jr <NdrOchip@ScampbellPfamily.AbizM-NOSPAM>
 " License:		Vim License  (see vim's :help license)
 "
@@ -24,7 +24,7 @@ set cpo&vim
 if &cp || exists("g:loaded_tar") || v:version < 700
  finish
 endif
-let g:loaded_tar= "v19+b"
+let g:loaded_tar= "v23b"
 "call Decho("loading autoload/tar.vim")
 if v:version < 701 || (v:version == 701 && !has("patch299"))
  echoerr "(autoload/tar.vim) need vim v7.1 with patchlevel 299"
@@ -134,16 +134,20 @@ fun! tar#Browse(tarfile)
   endif
   let curlast= line("$")
   if tarfile =~# '\.\(gz\|tgz\)$'
-"   call Decho("1: exe silent r! gzip -d -c ".s:Escape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - ")
+"   call Decho("1: exe silent r! gzip -d -c -- ".s:Escape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - ")
    exe "silent r! gzip -d -c -- ".s:Escape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
   elseif tarfile =~# '\.lrp'
 "   call Decho("2: exe silent r! cat -- ".s:Escape(tarfile,1)."|gzip -d -c -|".g:tar_cmd." -".g:tar_browseoptions." - ")
    exe "silent r! cat -- ".s:Escape(tarfile,1)."|gzip -d -c -|".g:tar_cmd." -".g:tar_browseoptions." - "
   elseif tarfile =~# '\.bz2$'
-"   call Decho("3: exe silent r! bzip2 -d -c ".s:Escape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - ")
+"   call Decho("3: exe silent r! bzip2 -d -c -- ".s:Escape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - ")
    exe "silent r! bzip2 -d -c -- ".s:Escape(tarfile,1)." | ".g:tar_cmd." -".g:tar_browseoptions." - "
   else
-"   call Decho("4: exe silent r! ".g:tar_cmd." -".g:tar_browseoptions." ".s:Escape(tarfile,0))
+   if tarfile =~ '^\s*-'
+    " A file name starting with a dash may be taken as an option.  Prepend ./ to avoid that.
+    let tarfile = substitute(tarfile, '-', './-', '')
+   endif
+"   call Decho("4: exe silent r! ".g:tar_cmd." -".g:tar_browseoptions." ".s:Escape(tarfile,1))
    exe "silent r! ".g:tar_cmd." -".g:tar_browseoptions." ".s:Escape(tarfile,1)
   endif
   if v:shell_error != 0
@@ -183,6 +187,13 @@ fun! s:TarBrowseSelect()
   let fname= getline(".")
 "  call Decho("fname<".fname.">")
 
+  if !exists("g:tar_secure") && fname =~ '^\s*-\|\s\+-'
+   redraw!
+   echohl WarningMsg | echo '***error*** (tar#BrowseSelect) rejecting tarfile member<'.fname.'> because of embedded "-"; See :help tar-options'
+"   call Dret('tar#BrowseSelect : rejecting tarfile member<'.fname.'> because of embedded "-"')
+   return
+  endif
+
   " sanity check
   if fname =~ '^"'
    let &report= repkeep
@@ -239,18 +250,27 @@ fun! tar#Read(fname,mode)
    endif
   endif
 
-  if tarfile =~# '\.\(gz\|tgz\)$'
-"   call Decho("5: exe silent r! gzip -d -c -- ".s:Escape(tarfile,1)."| ".g:tar_cmd.' -'.g:tar_readoptions.' - '.s:Escape(fname,1))
-   exe "silent r! gzip -d -c -- ".s:Escape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".s:Escape(fname,1).decmp
-  elseif tarfile =~# '\.lrp$'
-"   call Decho("6: exe silent r! cat ".s:Escape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".s:Escape(fname,1).decmp)
-   exe "silent r! cat -- ".s:Escape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".s:Escape(fname,1).decmp
-  elseif tarfile =~# '\.bz2$'
-"   call Decho("7: exe silent r! bzip2 -d -c ".s:Escape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".s:Escape(fname,1).decmp)
-   exe "silent r! bzip2 -d -c -- ".s:Escape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".s:Escape(fname,1).decmp
+  if exists("g:tar_secure")
+   let tar_secure= " -- "
   else
-"   call Decho("8: exe silent r! ".g:tar_cmd." -".g:tar_readoptions." -- ".s:Escape(tarfile,1)." ".s:Escape(fname,1))
-   exe "silent r! ".g:tar_cmd." -".g:tar_readoptions." ".s:Escape(tarfile,1)." -- ".s:Escape(fname,1).decmp
+   let tar_secure= " "
+  endif
+  if tarfile =~# '\.\(gz\|tgz\)$'
+"   call Decho("5: exe silent r! gzip -d -c -- ".s:Escape(tarfile,1)."| ".g:tar_cmd.' -'.g:tar_readoptions.' - '.tar_secure.s:Escape(fname,1))
+   exe "silent r! gzip -d -c -- ".s:Escape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.s:Escape(fname,1).decmp
+  elseif tarfile =~# '\.lrp$'
+"   call Decho("6: exe silent r! cat ".s:Escape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.s:Escape(fname,1).decmp)
+   exe "silent r! cat -- ".s:Escape(tarfile,1)." | gzip -d -c - | ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.s:Escape(fname,1).decmp
+  elseif tarfile =~# '\.bz2$'
+"   call Decho("7: exe silent r! bzip2 -d -c ".s:Escape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.s:Escape(fname,1).decmp)
+   exe "silent r! bzip2 -d -c -- ".s:Escape(tarfile,1)."| ".g:tar_cmd." -".g:tar_readoptions." - ".tar_secure.s:Escape(fname,1).decmp
+  else
+   if tarfile =~ '^\s*-'
+    " A file name starting with a dash may be taken as an option.  Prepend ./ to avoid that.
+    let tarfile = substitute(tarfile, '-', './-', '')
+   endif
+"   call Decho("8: exe silent r! ".g:tar_cmd." -".g:tar_readoptions." "s:Escape(tarfile,1).tar_secure..s:Escape(fname,1).decmp)
+   exe "silent r! ".g:tar_cmd." -".g:tar_readoptions." ".s:Escape(tarfile,1).tar_secure.s:Escape(fname,1).decmp
   endif
 
   if doro
@@ -276,6 +296,13 @@ fun! tar#Write(fname)
   let repkeep= &report
   set report=10
 
+  if !exists("g:tar_secure") && a:fname =~ '^\s*-\|\s\+-'
+   redraw!
+   echohl WarningMsg | echo '***error*** (tar#Write) rejecting tarfile member<'.a:fname.'> because of embedded "-"; See :help tar-options'
+"   call Dret('tar#Write : rejecting tarfile member<'.fname.'> because of embedded "-"')
+   return
+  endif
+
   " sanity checks
   if !executable(g:tar_cmd)
    redraw!
@@ -331,19 +358,21 @@ fun! tar#Write(fname)
   if tarfile =~# '\.gz'
    call system("gzip -d -- ".s:Escape(tarfile,0))
    let tarfile = substitute(tarfile,'\.gz','','e')
-   let compress= "gzip ".s:Escape(tarfile,0)
+   let compress= "gzip -- ".s:Escape(tarfile,0)
+"   call Decho("compress<".compress.">")
   elseif tarfile =~# '\.tgz'
    call system("gzip -d -- ".s:Escape(tarfile,0))
    let tarfile = substitute(tarfile,'\.tgz','.tar','e')
    let compress= "gzip -- ".s:Escape(tarfile,0)
    let tgz     = 1
+"   call Decho("compress<".compress.">")
   elseif tarfile =~# '\.bz2'
    call system("bzip2 -d -- ".s:Escape(tarfile,0))
    let tarfile = substitute(tarfile,'\.bz2','','e')
    let compress= "bzip2 -- ".s:Escape(tarfile,0)
+"   call Decho("compress<".compress.">")
   endif
 "  call Decho("tarfile<".tarfile.">")
-"  call Decho("compress<".compress.">")
 
   if v:shell_error != 0
    redraw!
@@ -363,16 +392,25 @@ fun! tar#Write(fname)
    if tarfile !~ '/'
     let tarfile= curdir.'/'.tarfile
    endif
+   if tarfile =~ '^\s*-'
+    " A file name starting with a dash may be taken as an option.  Prepend ./ to avoid that.
+    let tarfile = substitute(tarfile, '-', './-', '')
+   endif
 "   call Decho("tarfile<".tarfile."> fname<".fname.">")
  
+   if exists("g:tar_secure")
+    let tar_secure= " -- "
+   else
+    let tar_secure= " "
+   endif
    exe "w! ".fnameescape(fname)
    if executable("cygpath")
     let tarfile = substitute(system("cygpath ".s:Escape(tarfile,0)),'\n','','e')
    endif
  
    " delete old file from tarfile
-"   call Decho("system(tar --delete -f ".s:Escape(tarfile,0)." -- ".s:Escape(fname,0).")")
-   call system("tar --delete -f ".s:Escape(tarfile,0)." -- ".s:Escape(fname,0))
+"   call Decho("system(".g:tar_cmd." --delete -f ".s:Escape(tarfile,0)." -- ".s:Escape(fname,0).")")
+   call system(g:tar_cmd." --delete -f ".s:Escape(tarfile,0).tar_secure.s:Escape(fname,0))
    if v:shell_error != 0
     redraw!
     echohl Error | echo "***error*** (tar#Write) sorry, unable to update ".fnameescape(tarfile)." with ".fnameescape(fname) | echohl None
@@ -380,8 +418,8 @@ fun! tar#Write(fname)
    else
  
     " update tarfile with new file 
-"    call Decho("tar -".g:tar_writeoptions." ".s:Escape(tarfile,0)." -- ".s:Escape(fname,0))
-    call system("tar -".g:tar_writeoptions." ".s:Escape(tarfile,0)." -- ".s:Escape(fname,0))
+"    call Decho(g:tar_cmd." -".g:tar_writeoptions." ".s:Escape(tarfile,0).tar_secure.s:Escape(fname,0))
+    call system(g:tar_cmd." -".g:tar_writeoptions." ".s:Escape(tarfile,0).tar_secure.s:Escape(fname,0))
     if v:shell_error != 0
      redraw!
      echohl Error | echo "***error*** (tar#Write) sorry, unable to update ".fnameescape(tarfile)." with ".fnameescape(fname) | echohl None

runtime/autoload/vimball.vim

@@ -1,7 +1,7 @@
 " vimball.vim : construct a file containing both paths and files
 " Author:	Charles E. Campbell, Jr.
-" Date:		Jun 05, 2008
-" Version:	27
+" Date:		Jul 30, 2008
+" Version:	29
 " GetLatestVimScripts: 1502 1 :AutoInstall: vimball.vim
 " Copyright: (c) 2004-2008 by Charles E. Campbell, Jr.
 "            The VIM LICENSE applies to Vimball.vim, and Vimball.txt
@@ -15,7 +15,7 @@ if &cp || exists("g:loaded_vimball") || v:version < 700
  finish
 endif
 let s:keepcpo        = &cpo
-let g:loaded_vimball = "v27"
+let g:loaded_vimball = "v29"
 set cpo&vim
 "DechoTabOn
 
@@ -169,9 +169,8 @@ fun! vimball#MkVimball(line1,line2,writelevel,...) range
    call setline(lastline+1,0)
 
    " write the file from the tab
-   let svfilepath= s:Path(svfile,'')
-"   call Decho("exe $r ".fnameescape(svfilepath))
-   exe "$r ".fnameescape(svfilepath)
+"   call Decho("exe $r ".fnameescape(svfile))
+   exe "$r ".fnameescape(svfile)
 
    call setline(lastline+1,line("$") - lastline - 1)
 "   call Decho("lastline=".lastline." line$=".line("$"))
@@ -186,13 +185,11 @@ fun! vimball#MkVimball(line1,line2,writelevel,...) range
   call s:ChgDir(curdir)
   setlocal ff=unix
   if a:writelevel
-   let vbnamepath= s:Path(vbname,'')
-"   call Decho("exe w! ".fnameescape(vbnamepath))
-   exe "w! ".fnameescape(vbnamepath)
+"   call Decho("exe w! ".fnameescape(vbname))
+   exe "w! ".fnameescape(vbname)
   else
-   let vbnamepath= s:Path(vbname,'')
-"   call Decho("exe w ".fnameescape(vbnamepath))
-   exe "w ".fnameescape(vbnamepath)
+"   call Decho("exe w ".fnameescape(vbname))
+   exe "w ".fnameescape(vbname)
   endif
 "  call Decho("Vimball<".vbname."> created")
   echo "Vimball<".vbname."> created"
@@ -215,8 +212,8 @@ endfun
 fun! vimball#Vimball(really,...)
 "  call Dfunc("vimball#Vimball(really=".a:really.") a:0=".a:0)
 
-  if v:version < 701 || (v:version == 701 && !has("patch299"))
-   echoerr "This version of vimball requires vim 7.1 with patch 299"
+  if v:version < 701 || (v:version == 701 && !exists('*fnameescape'))
+   echoerr "your vim is missing the fnameescape() function"
 "   call Dret("vimball#Vimball : needs 7.1 with patch 299")
    return
   endif
@@ -338,7 +335,7 @@ fun! vimball#Vimball(really,...)
 
    " write tab to file
    if a:really
-    let fnamepath= s:Path(home."/".fname,'')
+    let fnamepath= home."/".fname
 "    call Decho("exe w! ".fnameescape(fnamepath))
 	exe "silent w! ".fnameescape(fnamepath)
     echo "wrote ".fnamepath
@@ -364,9 +361,9 @@ fun! vimball#Vimball(really,...)
   " set up help
 "  call Decho("about to set up help: didhelp<".didhelp.">")
   if didhelp != ""
-   let htpath= s:Path(home."/".didhelp,"")
+   let htpath= home."/".didhelp
 "   call Decho("exe helptags ".htpath)
-   exe "helptags ".htpath
+   exe "helptags ".fnameescape(htpath)
    echo "did helptags"
   endif
 
@@ -577,27 +574,6 @@ fun! s:ChgDir(newdir)
 "  call Dret("ChgDir : curdir<".getcwd().">")
 endfun
 
-" ---------------------------------------------------------------------
-" s:Path: prepend and append quotes and do escaping {{{2
-fun! s:Path(cmd,quote)
-"  call Dfunc("Path(cmd<".a:cmd."> quote<".a:quote.">) vimball_path_escape<".g:vimball_path_escape.">")
-  if (has("win32") || has("win95") || has("win64") || has("win16"))
-"   let cmdpath= a:quote.substitute(a:cmd,'/','\\','g').a:quote
-   let cmdpath= a:quote.substitute(a:cmd,'\\','/','g').a:quote
-"   call Decho("cmdpath<".cmdpath."> (win32 mod)")
-  else
-   let cmdpath= a:quote.a:cmd.a:quote
-"   call Decho("cmdpath<".cmdpath."> (not-win32 mod)")
-  endif
-  if a:quote == "" && g:vimball_path_escape !~ ' '
-   let cmdpath= escape(cmdpath,' ')
-"   call Decho("cmdpath<".cmdpath."> (empty quote case)")
-  endif
-  let cmdpath= escape(cmdpath,g:vimball_path_escape)
-"  call Dret("Path <".cmdpath.">")
-  return cmdpath
-endfun
-
 " ---------------------------------------------------------------------
 " s:RecordInVar: record a un-vimball command in the .VimballRecord file {{{2
 fun! s:RecordInVar(home,cmd)
@@ -719,14 +695,14 @@ fun! vimball#SaveSettings()
    let s:acdkeep = &acd
   endif
   let s:eikeep  = &ei
-  let s:fenkeep = &fen
+  let s:fenkeep = &l:fen
   let s:hidkeep = &hidden
   let s:ickeep  = &ic
   let s:lzkeep  = &lz
   let s:pmkeep  = &pm
   let s:repkeep = &report
   let s:vekeep  = &ve
-  let s:ffkeep  = &ff
+  let s:ffkeep  = &l:ff
   if exists("&acd")
    setlocal ei=all ve=all noacd nofen noic report=999 nohid bt= ma lz pm= ff=unix
   else
@@ -745,7 +721,7 @@ fun! vimball#RestoreSettings()
   if exists("&acd")
    let &acd   = s:acdkeep
   endif
-  let &fen    = s:fenkeep
+  let &l:fen  = s:fenkeep
   let &hidden = s:hidkeep
   let &ic     = s:ickeep
   let &lz     = s:lzkeep
@@ -753,7 +729,7 @@ fun! vimball#RestoreSettings()
   let &report = s:repkeep
   let &ve     = s:vekeep
   let &ei     = s:eikeep
-  let &ff     = s:ffkeep
+  let &l:ff   = s:ffkeep
   if s:makeep[0] != 0
    " restore mark a
 "   call Decho("restore mark-a: makeep=".string(makeep))

runtime/autoload/zip.vim

@@ -1,7 +1,7 @@
 " zip.vim: Handles browsing zipfiles
 "            AUTOLOAD PORTION
-" Date:		Jul 12, 2008
-" Version:	21 (modified by Bram)
+" Date:		Jul 30, 2008
+" Version:	22
 " Maintainer:	Charles E Campbell, Jr <NdrOchip@ScampbellPfamily.AbizM-NOSPAM>
 " License:	Vim License  (see vim's :help license)
 " Copyright:    Copyright (C) 2005-2008 Charles E. Campbell, Jr. {{{1
@@ -22,7 +22,7 @@ if &cp || exists("g:loaded_zip") || v:version < 700
  finish
 endif
 
-let g:loaded_zip     = "v21+b"
+let g:loaded_zip     = "v22"
 let s:zipfile_escape = ' ?&;\'
 let s:ERROR          = 2
 let s:WARNING        = 1
@@ -58,6 +58,12 @@ fun! zip#Browse(zipfile)
   set report=10
 
   " sanity checks
+  if !exists("*fnameescape")
+   if &verbose > 1
+    echoerr "the zip plugin is not available (your vim doens't support fnameescape())"
+   endif
+   return
+  endif
   if !executable(g:zip_unzipcmd)
    redraw!
    echohl Error | echo "***error*** (zip#Browse) unzip not available on your system"
@@ -99,8 +105,8 @@ fun! zip#Browse(zipfile)
   0d
   $
 
-"  call Decho("exe silent r! ".g:zip_unzipcmd." -l ".s:Escape(a:zipfile,1))
-  exe "silent r! ".g:zip_unzipcmd." -l ".s:Escape(a:zipfile,1)
+"  call Decho("exe silent r! ".g:zip_unzipcmd." -l -- ".s:Escape(a:zipfile,1))
+  exe "silent r! ".g:zip_unzipcmd." -l -- ".s:Escape(a:zipfile,1)
   if v:shell_error != 0
    redraw!
    echohl WarningMsg | echo "***warning*** (zip#Browse) ".fnameescape(a:zipfile)." is not a zip file" | echohl None
@@ -193,8 +199,8 @@ fun! zip#Read(fname,mode)
 "  call Decho("zipfile<".zipfile.">")
 "  call Decho("fname  <".fname.">")
 
-"  call Decho("exe r! ".g:zip_unzipcmd." -p ".s:Escape(zipfile,1)." ".s:Escape(fname,1))
-  exe "silent r! ".g:zip_unzipcmd." -p ".s:Escape(zipfile,1)." ".s:Escape(fname,1)
+"  call Decho("exe r! ".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fname,1))
+  exe "silent r! ".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fname,1)
 
   " cleanup
   0d
@@ -286,8 +292,8 @@ fun! zip#Write(fname)
     let fname = substitute(fname, '[', '[[]', 'g')
   endif
 
-"  call Decho(g:zip_zipcmd." -u ".s:Escape(zipfile,0)." ".s:Escape(fname,0))
-  call system(g:zip_zipcmd." -u ".s:Escape(zipfile,0)." ".s:Escape(fname,0))
+"  call Decho(g:zip_zipcmd." -u ".s:Escape(fnamemodify(zipfile,":p"),0)." ".s:Escape(fname,0))
+  call system(g:zip_zipcmd." -u ".s:Escape(fnamemodify(zipfile,":p"),0)." ".s:Escape(fname,0))
   if v:shell_error != 0
    redraw!
    echohl Error | echo "***error*** (zip#Write) sorry, unable to update ".zipfile." with ".fname | echohl None
@@ -342,9 +348,8 @@ endfun
 fun! s:ChgDir(newdir,errlvl,errmsg)
 "  call Dfunc("ChgDir(newdir<".a:newdir."> errlvl=".a:errlvl."  errmsg<".a:errmsg.">)")
 
-
   try
-   exe "cd ".fnameescape(newdir)
+   exe "cd ".fnameescape(a:newdir)
   catch /^Vim\%((\a\+)\)\=:E344/
    redraw!
    if a:errlvl == s:NOTE

runtime/colors/darkblue.vim

@@ -1,6 +1,6 @@
 " Vim color file
 " Maintainer:	Bohdan Vlasyuk <bohdan@vstu.edu.ua>
-" Last Change:	2006 Apr 30
+" Last Change:	2008 Jul 18
 
 " darkblue -- for those who prefer dark background
 " [note: looks bit uglier with come terminal palettes,
@@ -58,3 +58,9 @@ hi PreProc	ctermfg=magenta guifg=#ff80ff gui=none cterm=none
 hi type		ctermfg=green guifg=#60ff60 gui=none cterm=none
 hi Underlined	cterm=underline term=underline
 hi Ignore	guifg=bg ctermfg=bg
+
+" suggested by tigmoid, 2008 Jul 18
+hi Pmenu guifg=#c0c0c0 guibg=#404080
+hi PmenuSel guifg=#c0c0c0 guibg=#2050d0
+hi PmenuSbar guifg=blue guibg=darkgray
+hi PmenuThumb guifg=#c0c0c0

runtime/doc/Makefile

@@ -287,6 +287,11 @@ CONVERTED = \
 	vimdiff-it.UTF-8.1 \
 	vimtutor-it.UTF-8.1 \
 	xxd-it.UTF-8.1 \
+	vim-pl.UTF-8.1 \
+	evim-pl.UTF-8.1 \
+	vimdiff-pl.UTF-8.1 \
+	vimtutor-pl.UTF-8.1 \
+	xxd-pl.UTF-8.1 \
 	vim-ru.UTF-8.1 \
 	evim-ru.UTF-8.1 \
 	vimdiff-ru.UTF-8.1 \
@@ -296,7 +301,7 @@ CONVERTED = \
 .SUFFIXES:
 .SUFFIXES: .c .o .txt .html
 
-all: tags vim.man vimdiff.man vimtutor.man xxd.man $(CONVERTED)
+all: tags vim.man evim.man vimdiff.man vimtutor.man xxd.man $(CONVERTED)
 
 # Use Vim to generate the tags file.  Can only be used when Vim has been
 # compiled and installed.  Supports multiple languages.
@@ -314,6 +319,9 @@ doctags: doctags.c
 vim.man: vim.1
 	nroff -man vim.1 | sed -e s/.//g > vim.man
 
+evim.man: evim.1
+	nroff -man evim.1 | sed -e s/.//g > evim.man
+
 vimdiff.man: vimdiff.1
 	nroff -man vimdiff.1 | sed -e s/.//g > vimdiff.man
 
@@ -445,6 +453,21 @@ vimtutor-it.UTF-8.1: vimtutor-it.1
 xxd-it.UTF-8.1: xxd-it.1
 	iconv -f latin1 -t utf-8 $< >$@
 
+vim-pl.UTF-8.1: vim-pl.1
+	iconv -f latin2 -t utf-8 $< >$@
+
+evim-pl.UTF-8.1: evim-pl.1
+	iconv -f latin2 -t utf-8 $< >$@
+
+vimdiff-pl.UTF-8.1: vimdiff-pl.1
+	iconv -f latin2 -t utf-8 $< >$@
+
+vimtutor-pl.UTF-8.1: vimtutor-pl.1
+	iconv -f latin2 -t utf-8 $< >$@
+
+xxd-pl.UTF-8.1: xxd-pl.1
+	iconv -f latin2 -t utf-8 $< >$@
+
 vim-ru.UTF-8.1: vim-ru.1
 	iconv -f KOI8-R -t utf-8 $< >$@
 

runtime/doc/arabic.txt

@@ -1,4 +1,4 @@
-*arabic.txt*	For Vim version 7.2b.  Last change: 2005 Mar 29
+*arabic.txt*	For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL	  by Nadim Shaikli

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 7.2b.  Last change: 2008 Jun 27
+*autocmd.txt*   For Vim version 7.2.  Last change: 2008 Jun 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -335,6 +335,8 @@ BufDelete			Before deleting a buffer from the buffer list.
 				NOTE: When this autocommand is executed, the
 				current buffer "%" may be different from the
 				buffer being deleted "<afile>" and "<abuf>".
+				Don't change to another buffer, it will cause
+				problems.
 							*BufEnter*
 BufEnter			After entering a buffer.  Useful for setting
 				options for a file type.  Also executed when
@@ -397,6 +399,8 @@ BufUnload			Before unloading a buffer.  This is when the
 				NOTE: When this autocommand is executed, the
 				current buffer "%" may be different from the
 				buffer being unloaded "<afile>".
+				Don't change to another buffer, it will cause
+				problems.
 							*BufWinEnter*
 BufWinEnter			After a buffer is displayed in a window.  This
 				can be when the buffer is loaded (after
@@ -428,6 +432,8 @@ BufWipeout			Before completely deleting a buffer.  The
 				NOTE: When this autocommand is executed, the
 				current buffer "%" may be different from the
 				buffer being deleted "<afile>".
+				Don't change to another buffer, it will cause
+				problems.
 						*BufWrite* *BufWritePre*
 BufWrite or BufWritePre		Before writing the whole buffer to a file.
 							*BufWriteCmd*
@@ -748,8 +754,10 @@ SwapExists			Detected an existing swap file when starting
 					'a'	abort, like hitting CTRL-C
 				When set to an empty string the user will be
 				asked, as if there was no SwapExists autocmd.
-				Note: Do not try to change the buffer, the
-				results are unpredictable.
+							*E812*
+				It is not allowed to change to another buffer,
+				change a buffer name or change directory
+				here.
 							*Syntax*
 Syntax				When the 'syntax' option has been set.  The
 				pattern is matched against the syntax name.

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 7.2b.  Last change: 2008 Jul 09
+*change.txt*    For Vim version 7.2.  Last change: 2008 Jul 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1561,10 +1561,12 @@ found here: |sort()|.
 
 			With [n] sorting is done on the first decimal number
 			in the line (after or inside a {pattern} match).
+			One leading '-' is included in the number.
 
 			With [x] sorting is done on the first hexadecimal
 			number in the line (after or inside a {pattern}
 			match).  A leading "0x" or "0X" is ignored.
+			One leading '-' is included in the number.
 
 			With [o] sorting is done on the first octal number in
 			the line (after or inside a {pattern} match).

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 7.2b.  Last change: 2008 Jul 11
+*cmdline.txt*   For Vim version 7.2.  Last change: 2008 Sep 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -99,19 +99,20 @@ CTRL-E or <End>						*c_CTRL-E* *c_<End>*
 		cursor to end of command-line
 
 							*c_<LeftMouse>*
-<LeftMouse>	cursor to position of mouse click.
+<LeftMouse>	Move the cursor to the position of the mouse click.
 
 CTRL-H							*c_<BS>* *c_CTRL-H*
-<BS>		delete the character in front of the cursor (see |:fixdel| if
+<BS>		Delete the character in front of the cursor (see |:fixdel| if
 		your <BS> key does not do what you want).
 							*c_<Del>*
-<Del>		delete the character under the cursor (at end of line:
+<Del>		Delete the character under the cursor (at end of line:
 		character before the cursor) (see |:fixdel| if your <Del>
 		key does not do what you want).
 							*c_CTRL-W*
-CTRL-W		delete the word before the cursor
+CTRL-W		Delete the |word| before the cursor.  This depends on the
+		'iskeyword' option.
 							*c_CTRL-U*
-CTRL-U		remove all characters between the cursor position and
+CTRL-U		Remove all characters between the cursor position and
 		the beginning of the line.  Previous versions of vim
 		deleted all characters on the line.  If that is the
 		preferred behavior, add the following to your .vimrc: >
@@ -156,6 +157,11 @@ CTRL-R {0-9a-z"%#:-=.}					*c_CTRL-R* *c_<C-R>*
 				(doesn't work at the expression prompt; some
 				things such as changing the buffer or current
 				window are not allowed to avoid side effects)
+				When the result is a |List| the items are used
+				as lines.  They can have line breaks inside
+				too.
+				When the result is a Float it's automatically
+				converted to a String.
 		See |registers| about registers.  {not in Vi}
 		Implementation detail: When using the |expression| register
 		and invoking setcmdpos(), this sets the position before
@@ -435,13 +441,20 @@ between files with almost the same name.  If there are multiple matches,
 those files with an extension that is in the 'suffixes' option are ignored.
 The default is ".bak,~,.o,.h,.info,.swp,.obj", which means that files ending
 in ".bak", "~", ".o", ".h", ".info", ".swp" and ".obj" are sometimes ignored.
-It is impossible to ignore suffixes with two dots.  Examples:
+
+An empty entry, two consecutive commas, match a file name that does not
+contain a ".", thus has no suffix.  This is useful to ignore "prog" and prefer
+"prog.c".
+
+Examples:
 
   pattern:	files:				match:	~
    test*	test.c test.h test.o		test.c
    test*	test.h test.o			test.h and test.o
    test*	test.i test.h test.c		test.i and test.c
 
+It is impossible to ignore suffixes with two dots.
+
 If there is more than one matching file (after ignoring the ones matching
 the 'suffixes' option) the first file name is inserted.  You can see that
 there is only one match when you type 'wildchar' twice and the completed
@@ -729,19 +742,29 @@ to use |fnameescape()|.
 In Ex commands, at places where a file name can be used, the following
 characters have a special meaning.  These can also be used in the expression
 function expand() |expand()|.
-	%	is replaced with the current file name			*:_%*
-	#	is replaced with the alternate file name		*:_#*
+	%	Is replaced with the current file name.		  *:_%* *c_%*
+	#	Is replaced with the alternate file name.	  *:_#* *c_#*
 	#n	(where n is a number) is replaced with the file name of
-		buffer n.  "#0" is the same as "#"
-	##	is replaced with all names in the argument list		*:_##*
+		buffer n.  "#0" is the same as "#".
+	##	Is replaced with all names in the argument list	  *:_##* *c_##*
 		concatenated, separated by spaces.  Each space in a name
 		is preceded with a backslash.
-Note that these give the file name as it was typed.  If an absolute path is
-needed (when using the file name from a different directory), you need to add
-":p".  See |filename-modifiers|.
+	#<n	(where n is a number > 0) is replaced with old	  *:_#<* *c_#<*
+		file name n.  See |:oldfiles| or |v:oldfiles| to get the
+		number.							*E809*
+		{only when compiled with the +eval and +viminfo features}
+
+Note that these, except "#<n", give the file name as it was typed.  If an
+absolute path is needed (when using the file name from a different directory),
+you need to add ":p".  See |filename-modifiers|.
+
+The "#<n" item returns an absolute path, but it will start with "~/" for files
+below your home directory.
+
 Note that backslashes are inserted before spaces, so that the command will
 correctly interpret the file name.  But this doesn't happen for shell
-commands.  For those you probably have to use quotes: >
+commands.  For those you probably have to use quotes (this fails for files
+that contain a quote and wildcards): >
 	:!ls "%"
 	:r !spell "%"
 
@@ -997,7 +1020,7 @@ other than the one that is executed with <CR> are lost.
 If you would like to execute the command under the cursor and then have the
 command-line window open again, you may find this mapping useful: >
 
-	:map <F5> <CR>q:
+	:autocmd CmdwinEnter * map <buffer> <F5> <CR>q:
 
 
 VARIOUS
@@ -1044,9 +1067,9 @@ events are not triggered.  You can use the Cmdwin events to do settings
 specifically for the command-line window.  Be careful not to cause side
 effects!
 Example: >
-	:au CmdwinEnter :  let b:cpt_save = &cpt | set cpt=v
+	:au CmdwinEnter :  let b:cpt_save = &cpt | set cpt=.
 	:au CmdwinLeave :  let &cpt = b:cpt_save
-This sets 'complete' to use command-line completion in Insert mode for CTRL-N.
+This sets 'complete' to use completion in the current window for |i_CTRL-N|.
 Another example: >
 	:au CmdwinEnter [/?]  startinsert
 This will make Vim start in Insert mode in the command-line window.

runtime/doc/debug.txt

@@ -1,4 +1,4 @@
-*debug.txt*     For Vim version 7.2b.  Last change: 2006 May 01
+*debug.txt*     For Vim version 7.2.  Last change: 2006 May 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/debugger.txt

@@ -1,4 +1,4 @@
-*debugger.txt*  For Vim version 7.2b.  Last change: 2005 Mar 29
+*debugger.txt*  For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur

runtime/doc/develop.txt

@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 7.2b.  Last change: 2007 May 11
+*develop.txt*   For Vim version 7.2.  Last change: 2007 May 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/diff.txt

@@ -1,12 +1,12 @@
-*diff.txt*      For Vim version 7.2b.  Last change: 2006 Oct 02
+*diff.txt*      For Vim version 7.2.  Last change: 2008 Jul 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
 
 
 				*diff* *vimdiff* *gvimdiff* *diff-mode*
-This file describes the +diff feature: Showing differences between two or
-three versions of the same file.
+This file describes the +diff feature: Showing differences between two,
+three or four versions of the same file.
 
 The basics are explained in section |08.7| of the user manual.
 
@@ -49,7 +49,7 @@ What happens is that Vim opens a window for each of the files.  This is like
 using the |-O| argument.  This uses vertical splits.  If you prefer horizontal
 splits add the |-o| argument: >
 
-	vimdiff -o file1 file2 [file3]
+	vimdiff -o file1 file2 [file3 [file4]]
 
 If you always prefer horizontal splits include "horizontal" in 'diffopt'.
 

runtime/doc/digraph.txt

@@ -1,15 +1,15 @@
-*digraph.txt*   For Vim version 7.2b.  Last change: 2007 Sep 10
+*digraph.txt*   For Vim version 7.2.  Last change: 2008 Aug 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
 
 
-Digraphs						*digraphs* *Digraphs*
+Digraphs					*digraph* *digraphs* *Digraphs*
 
 Digraphs are used to enter characters that normally cannot be entered by
-an ordinary keyboard.  These are mostly accented characters which have the
-eighth bit set.  The digraphs are easier to remember than the decimal number
-that can be entered with CTRL-V (see |i_CTRL-V|).
+an ordinary keyboard.  These are mostly printable non-ASCII characters.  The
+digraphs are easier to remember than the decimal number that can be entered
+with CTRL-V (see |i_CTRL-V|).
 
 There is a brief introduction on digraphs in the user manual: |24.9|
 An alternative is using the 'keymap' option.
@@ -53,7 +53,9 @@ this file.
 The decimal number normally is the Unicode number of the character.  Note that
 the meaning doesn't change when 'encoding' changes.  The character will be
 converted from Unicode to 'encoding' when needed.  This does require the
-conversion to be available, it might fail.
+conversion to be available, it might fail.  For the NUL character you will see
+"10".  That's because NUL characters are internally represented with a NL
+character.  When you write the file it will become a NUL character.
 
 When Vim was compiled without the +multi_byte feature, you need to specify the
 character in the encoding given with 'encoding'.  You might want to use

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 7.2b.  Last change: 2008 Jul 05
+*editing.txt*   For Vim version 7.2.  Last change: 2008 Aug 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -719,23 +719,23 @@ list of the current window.
 			and |+cmd|.  {not in Vi}
 
 							*:wn* *:wnext*
-:[count]wn[ext] [++opt] [+cmd]
+:[count]wn[ext] [++opt]
 			Write current file and start editing the [count]
 			next file.  Also see |++opt| and |+cmd|.  {not in Vi}
 
-:[count]wn[ext] [++opt] [+cmd] {file}
+:[count]wn[ext] [++opt] {file}
 			Write current file to {file} and start editing the
 			[count] next file, unless {file} already exists and
 			the 'writeany' option is off.  Also see |++opt| and
 			|+cmd|.  {not in Vi}
 
-:[count]wn[ext]! [++opt] [+cmd] {file}
+:[count]wn[ext]! [++opt] {file}
 			Write current file to {file} and start editing the
 			[count] next file.  Also see |++opt| and |+cmd|.  {not
 			in Vi}
 
-:[count]wN[ext][!] [++opt] [+cmd] [file]		*:wN* *:wNext*
-:[count]wp[revious][!] [++opt] [+cmd] [file]		*:wp* *:wprevious*
+:[count]wN[ext][!] [++opt] [file]		*:wN* *:wNext*
+:[count]wp[revious][!] [++opt] [file]		*:wp* *:wprevious*
 			Same as :wnext, but go to previous file instead of
 			next.  {not in Vi}
 
@@ -855,39 +855,46 @@ Note: When the 'write' option is off, you are not able to write any file.
 							*:w* *:write*
 						*E502* *E503* *E504* *E505*
 						*E512* *E514* *E667* *E796*
-:w[rite]		Write the whole buffer to the current file.  This is
+:w[rite] [++opt]	Write the whole buffer to the current file.  This is
 			the normal way to save changes to a file.  It fails
 			when the 'readonly' option is set or when there is
 			another reason why the file can't be written.
+			For ++opt see |++opt|, but only ++bin, ++nobin, ++ff
+			and ++enc are effective.
 
-:w[rite]!		Like ":write", but forcefully write when 'readonly' is
+:w[rite]! [++opt]	Like ":write", but forcefully write when 'readonly' is
 			set or there is another reason why writing was
 			refused.
 			Note: This may change the permission and ownership of
 			the file and break (symbolic) links.  Add the 'W' flag
 			to 'cpoptions' to avoid this.
 
-:[range]w[rite][!]	Write the specified lines to the current file.  This
+:[range]w[rite][!] [++opt]
+			Write the specified lines to the current file.  This
 			is unusual, because the file will not contain all
 			lines in the buffer.
 
 							*:w_f* *:write_f*
-:[range]w[rite]	{file}	Write the specified lines to {file}, unless it
+:[range]w[rite] [++opt]	{file}
+			Write the specified lines to {file}, unless it
 			already exists and the 'writeany' option is off.
 
 							*:w!*
-:[range]w[rite]! {file}	Write the specified lines to {file}.  Overwrite an
+:[range]w[rite]! [++opt] {file}
+			Write the specified lines to {file}.  Overwrite an
 			existing file.
 
 						*:w_a* *:write_a* *E494*
-:[range]w[rite][!] >>	Append the specified lines to the current file.
+:[range]w[rite][!] [++opt] >>
+			Append the specified lines to the current file.
 
-:[range]w[rite][!] >> {file}
+:[range]w[rite][!] [++opt] >> {file}
 			Append the specified lines to {file}.  '!' forces the
 			write even if file does not exist.
 
 							*:w_c* *:write_c*
-:[range]w[rite] !{cmd}	Execute {cmd} with [range] lines as standard input
+:[range]w[rite] [++opt] !{cmd}
+			Execute {cmd} with [range] lines as standard input
 			(note the space in front of the '!').  {cmd} is
 			executed like with ":!{cmd}", any '!' is replaced with
 			the previous command |:!|.
@@ -904,7 +911,8 @@ used, for example, when the write fails and you want to try again later with
 'cpoptions' option.
 
 							*:sav* *:saveas*
-:sav[eas][!] {file}	Save the current buffer under the name {file} and set
+:sav[eas][!] [++opt] {file}
+			Save the current buffer under the name {file} and set
 			the filename of the current buffer to {file}.  The
 			previous name is used for the alternate file name.
 			The [!] is needed to overwrite an existing file.
@@ -914,7 +922,7 @@ used, for example, when the write fails and you want to try again later with
 			{not in Vi}
 
 							*:up* *:update*
-:[range]up[date][!] [>>] [file]
+:[range]up[date][!] [++opt] [>>] [file]
 			Like ":write", but only write when the buffer has been
 			modified.  {not in Vi}
 
@@ -1063,30 +1071,31 @@ The names can be in upper- or lowercase.
 			|quickfix|).  {not in Vi}
 
 							*:wq*
-:wq			Write the current file and quit.  Writing fails when
+:wq [++opt]		Write the current file and quit.  Writing fails when
 			the file is read-only or the buffer does not have a
 			name.  Quitting fails when the last file in the
 			argument list has not been edited.
 
-:wq!			Write the current file and quit.  Writing fails when
+:wq! [++opt]		Write the current file and quit.  Writing fails when
 			the current buffer does not have a name.
 
-:wq {file}		Write to {file} and quit.  Quitting fails when the
+:wq [++opt] {file}	Write to {file} and quit.  Quitting fails when the
 			last file in the argument list has not been edited.
 
-:wq! {file}		Write to {file} and quit.
+:wq! [++opt] {file}	Write to {file} and quit.
 
-:[range]wq[!] [file]	Same as above, but only write the lines in [range].
+:[range]wq[!] [++opt] [file]
+			Same as above, but only write the lines in [range].
 
 							*:x* *:xit*
-:[range]x[it][!] [file]
+:[range]x[it][!] [++opt] [file]
 			Like ":wq", but write only when changes have been
 			made.
 			When 'hidden' is set and there are more windows, the
 			current buffer becomes hidden, after writing the file.
 
 							*:exi* *:exit*
-:[range]exi[t][!] [file]
+:[range]exi[t][!] [++opt] [file]
 			Same as :xit.
 
 							*ZZ*
@@ -1118,18 +1127,18 @@ MULTIPLE WINDOWS AND BUFFERS				*window-exit*
 							*:quita* *:quitall*
 :quita[ll][!]	Same as ":qall". {not in Vi}
 
-:wqa[ll]					*:wqa* *:wqall* *:xa* *:xall*
+:wqa[ll] [++opt]				*:wqa* *:wqall* *:xa* *:xall*
 :xa[ll]		Write all changed buffers and exit Vim.  If there are buffers
 		without a file name, which are readonly or which cannot be
 		written for another reason, Vim will not quit. {not in Vi}
 
-:conf[irm] wqa[ll]
+:conf[irm] wqa[ll] [++opt]
 :conf[irm] xa[ll]
 		Write all changed buffers and exit Vim.  Bring up a prompt
 		when some buffers are readonly or cannot be written for
 		another reason.  See |:confirm|. {not in Vi}
 
-:wqa[ll]!
+:wqa[ll]! [++opt]
 :xa[ll]!	Write all changed buffers, even the ones that are readonly,
 		and exit Vim.  If there are buffers without a file name or
 		which cannot be written for another reason, Vim will not quit.

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 7.2b.  Last change: 2008 Jul 09
+*eval.txt*	For Vim version 7.2.  Last change: 2008 Nov 27
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -967,11 +967,16 @@ These are INVALID:
 	3.		empty {M}
 	1e40		missing .{M}
 
+							*float-pi* *float-e*
+A few useful values to copy&paste: >
+	:let pi = 3.14159265359
+	:let e  = 2.71828182846
+
 Rationale:
 Before floating point was introduced, the text "123.456" was interpreted as
 the two numbers "123" and "456", both converted to a string and concatenated,
 resulting in the string "123456".  Since this was considered pointless, and we
-could not find it actually being used in Vim scripts, this backwards
+could not find it intentionally being used in Vim scripts, this backwards
 incompatibility was accepted in favor of being able to use the normal notation
 for floating point numbers.
 
@@ -1479,6 +1484,17 @@ v:mouse_col	Column number for a mouse click obtained with |getchar()|.
 		This is the screen column number, like with |virtcol()|.  The
 		value is zero when there was no mouse button click.
 
+					*v:oldfiles* *oldfiles-variable*
+v:oldfiles	List of file names that is loaded from the |viminfo| file on
+		startup.  These are the files that Vim remembers marks for.
+		The length of the List is limited by the ' argument of the
+		'viminfo' option (default is 100).
+		Also see |:oldfiles| and |c_#<|.
+		The List can be modified, but this has no effect on what is
+		stored in the |viminfo| file later.  If you use values other
+		than String this will cause trouble.
+		{only when compiled with the +viminfo feature}
+
 					*v:operator* *operator-variable*
 v:operator	The last operator given in Normal mode.  This is a single
 		character except for commands starting with <g> or <z>,
@@ -1690,7 +1706,7 @@ executable( {expr})		Number	1 if executable {expr} exists
 exists( {expr})			Number	TRUE if {expr} exists
 extend({expr1}, {expr2} [, {expr3}])
 				List/Dict insert items of {expr2} into {expr1}
-expand( {expr})			String	expand special keywords in {expr}
+expand( {expr} [, {flag}])	String	expand special keywords in {expr}
 feedkeys( {string} [, {mode}])	Number	add key sequence to typeahead buffer
 filereadable( {file})		Number	TRUE if {file} is a readable file
 filewritable( {file})		Number	TRUE if {file} is a writable file
@@ -1742,8 +1758,9 @@ gettabwinvar( {tabnr}, {winnr}, {name})
 getwinposx()			Number	X coord in pixels of GUI Vim window
 getwinposy()			Number	Y coord in pixels of GUI Vim window
 getwinvar( {nr}, {varname})	any	variable {varname} in window {nr}
-glob( {expr})			String	expand file wildcards in {expr}
-globpath( {path}, {expr})	String	do glob({expr}) for all dirs in {path}
+glob( {expr} [, {flag}])	String	expand file wildcards in {expr}
+globpath( {path}, {expr} [, {flag}])
+				String	do glob({expr}) for all dirs in {path}
 has( {feature})			Number	TRUE if feature {feature} supported
 has_key( {dict}, {key})		Number	TRUE if {dict} has entry {key}
 haslocaldir()			Number	TRUE if current window executed |:lcd|
@@ -2397,6 +2414,7 @@ cursor({list})
 		When 'virtualedit' is used {off} specifies the offset in
 		screen columns from the start of the character.  E.g., a
 		position within a <Tab> or after the last character.
+		Returns 0 when the position could be set, -1 otherwise.
 
 
 deepcopy({expr}[, {noref}])				*deepcopy()* *E698*
@@ -2676,7 +2694,11 @@ extend({expr1}, {expr2} [, {expr3}])			*extend()*
 		Examples: >
 			:echo sort(extend(mylist, [7, 5]))
 			:call extend(mylist, [2, 3], 1)
-<		Use |add()| to concatenate one item to a list.	To concatenate
+<		When {expr1} is the same List as {expr2} then the number of
+		items copied is equal to the original length of the List.
+		E.g., when {expr3} is 1 you get N new copies of the first item
+		(where N is the original length of the List).
+		Use |add()| to concatenate one item to a list.	To concatenate
 		two lists into a new list use the + operator: >
 			:let newlist = [1, 2, 3] + [4, 5]
 <
@@ -2823,11 +2845,13 @@ fnameescape({string})					*fnameescape()*
 		For most systems the characters escaped are
 		" \t\n*?[{`$\\%#'\"|!<".  For systems where a backslash
 		appears in a filename, it depends on the value of 'isfname'.
+		A leading '+' and '>' is also escaped (special after |:edit|
+		and |:write|).  And a "-" by itself (special after |:cd|).
 		Example: >
-			:let fname = 'some str%nge|name'
+			:let fname = '+some str%nge|name'
 			:exe "edit " . fnameescape(fname)
 <		results in executing: >
-			edit some\ str\%nge\|name
+			edit \+some\ str\%nge\|name
 
 fnamemodify({fname}, {mods})				*fnamemodify()*
 		Modify file name {fname} according to {mods}.  {mods} is a
@@ -3264,14 +3288,16 @@ getwinvar({winnr}, {varname})				*getwinvar()*
 			:let list_is_on = getwinvar(2, '&list')
 			:echo "myvar = " . getwinvar(1, 'myvar')
 <
-							*glob()*
-glob({expr})	Expand the file wildcards in {expr}.  See |wildcards| for the
+glob({expr} [, {flag}])					*glob()*
+		Expand the file wildcards in {expr}.  See |wildcards| for the
 		use of special characters.
 		The result is a String.
 		When there are several matches, they are separated by <NL>
 		characters.
-		The 'wildignore' option applies: Names matching one of the
-		patterns in 'wildignore' will be skipped.
+		Unless the optional {flag} argument is given and is non-zero,
+		the 'suffixes' and 'wildignore' options apply: Names matching
+		one of the patterns in 'wildignore' will be skipped and
+		'suffixes' affect the ordering of matches.
 		If the expansion fails, the result is an empty string.
 		A name for a non-existing file is not included.
 
@@ -3285,20 +3311,22 @@ glob({expr})	Expand the file wildcards in {expr}.  See |wildcards| for the
 		See |expand()| for expanding special Vim variables.  See
 		|system()| for getting the raw output of an external command.
 
-globpath({path}, {expr})				*globpath()*
+globpath({path}, {expr} [, {flag}])			*globpath()*
 		Perform glob() on all directories in {path} and concatenate
 		the results.  Example: >
 			:echo globpath(&rtp, "syntax/c.vim")
 <		{path} is a comma-separated list of directory names.  Each
 		directory name is prepended to {expr} and expanded like with
-		glob().  A path separator is inserted when needed.
+		|glob()|.  A path separator is inserted when needed.
 		To add a comma inside a directory name escape it with a
 		backslash.  Note that on MS-Windows a directory may have a
 		trailing backslash, remove it if you put a comma after it.
 		If the expansion fails for one of the directories, there is no
 		error message.
-		The 'wildignore' option applies: Names matching one of the
-		patterns in 'wildignore' will be skipped.
+		Unless the optional {flag} argument is given and is non-zero,
+		the 'suffixes' and 'wildignore' options apply: Names matching
+		one of the patterns in 'wildignore' will be skipped and
+		'suffixes' affect the ordering of matches.
 
 		The "**" item can be used to search in a directory tree.
 		For example, to find all "README.txt" files in the directories
@@ -4022,8 +4050,12 @@ mkdir({name} [, {path} [, {prot}]])
 		If {prot} is given it is used to set the protection bits of
 		the new directory.  The default is 0755 (rwxr-xr-x: r/w for
 		the user readable for others).	Use 0700 to make it unreadable
-		for others.
-		This function is not available in the |sandbox|.
+		for others.  This is only used for the last part of {name}.
+		Thus if you create /tmp/foo/bar then /tmp/foo will be created
+		with 0755.
+		Example: >
+			:call mkdir($HOME . "/tmp/foo/bar", "p", 0700)
+<		This function is not available in the |sandbox|.
 		Not available on all systems.  To check use: >
 			:if exists("*mkdir")
 <
@@ -4485,6 +4517,7 @@ rename({from}, {to})					*rename()*
 		should also work to move files across file systems.  The
 		result is a Number, which is 0 if the file was renamed
 		successfully, and non-zero when the renaming failed.
+		NOTE: If {to} exists it is overwritten without warning.
 		This function is not available in the |sandbox|.
 
 repeat({expr}, {count})					*repeat()*
@@ -4963,9 +4996,16 @@ shellescape({string} [, {special}])			*shellescape()*
 		and replace all "'" with "'\''".
 		When the {special} argument is present and it's a non-zero
 		Number or a non-empty String (|non-zero-arg|), then special
-		items such as "%", "#" and "<cword>" will be preceded by a
-		backslash.  This backslash will be removed again by the |:!|
+		items such as "!", "%", "#" and "<cword>" will be preceded by
+		a backslash.  This backslash will be removed again by the |:!|
 		command.
+		The "!" character will be escaped (again with a |non-zero-arg|
+		{special}) when 'shell' contains "csh" in the tail.  That is
+		because for csh and tcsh "!" is used for history replacement
+		even when inside single quotes.
+		The <NL> character is also escaped.  With a |non-zero-arg|
+		{special} and 'shell' containing "csh" in the tail it's
+		escaped a second time.
 		Example of use with a |:!| command: >
 		    :exe '!dir ' . shellescape(expand('<cfile>'), 1)
 <		This results in a directory listing for the file under the
@@ -5310,10 +5350,12 @@ synIDattr({synID}, {what} [, {mode}])			*synIDattr()*
 		"fg"		foreground color (GUI: color name used to set
 				the color, cterm: color number as a string,
 				term: empty string)
-		"bg"		background color (like "fg")
+		"bg"		background color (as with "fg")
+		"sp"		special color (as with "fg") |highlight-guisp|
 		"fg#"		like "fg", but for the GUI and the GUI is
 				running the name in "#RRGGBB" form
 		"bg#"		like "fg#" for "bg"
+		"sp#"		like "fg#" for "sp"
 		"bold"		"1" if bold
 		"italic"	"1" if italic
 		"reverse"	"1" if reverse
@@ -5801,7 +5843,8 @@ mouse_netterm		Compiled with support for netterm mouse.
 mouse_pterm		Compiled with support for qnx pterm mouse.
 mouse_sysmouse		Compiled with support for sysmouse (*BSD console mouse)
 mouse_xterm		Compiled with support for xterm mouse.
-multi_byte		Compiled with support for editing Korean et al.
+multi_byte		Compiled with support for 'encoding'
+multi_byte_encoding	'encoding' is set to a multi-byte encoding.
 multi_byte_ime		Compiled with support for IME input method.
 multi_lang		Compiled with support for multiple languages.
 mzscheme		Compiled with MzScheme interface |mzscheme|.
@@ -5918,7 +5961,7 @@ It's also possible to use curly braces, see |curly-braces-names|.  And the
 A function local to a script must start with "s:".  A local script function
 can only be called from within the script and from functions, user commands
 and autocommands defined in the script.  It is also possible to call the
-function from a mappings defined in the script, but then |<SID>| must be used
+function from a mapping defined in the script, but then |<SID>| must be used
 instead of "s:" when the mapping is expanded outside of the script.
 
 					*:fu* *:function* *E128* *E129* *E123*
@@ -6028,7 +6071,7 @@ can be 0).  "a:000" is set to a |List| that contains these arguments.  Note
 that "a:1" is the same as "a:000[0]".
 								*E742*
 The a: scope and the variables in it cannot be changed, they are fixed.
-However, if a |List| or |Dictionary| is used, you can changes their contents.
+However, if a |List| or |Dictionary| is used, you can change their contents.
 Thus you can pass a |List| to a function and have the function add an item to
 it.  If you want to make sure the function cannot change a |List| or
 |Dictionary| use |:lockvar|.

runtime/doc/farsi.txt

@@ -1,4 +1,4 @@
-*farsi.txt*     For Vim version 7.2b.  Last change: 2005 Mar 29
+*farsi.txt*     For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Mortaza Ghassab Shiran

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 7.2b.  Last change: 2008 Jun 27
+*filetype.txt*  For Vim version 7.2.  Last change: 2008 Jul 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -482,6 +482,29 @@ g:changelog_date_end_entry_search
 			The default is '^\s*$' which finds lines that contain
 			only whitespace or are completely empty.
 
+b:changelog_name					*b:changelog_name*
+			Name of the ChangeLog file to look for.
+			The default is 'ChangeLog'.
+
+b:changelog_path
+			Path of the ChangeLog to use for the current buffer.
+			The default is empty, thus looking for a file named
+			|b:changelog_name| in the same directory as the
+			current buffer.  If not found, the parent directory of
+			the current buffer is searched.  This continues
+			recursively until a file is found or there are no more
+			parent directories to search.
+
+b:changelog_entry_prefix
+			Name of a function to call to generate a prefix to a
+			new entry.  This function takes no arguments and
+			should return a string containing the prefix.
+			Returning an empty prefix is fine.
+			The default generates the shortest path between the
+			ChangeLog's pathname and the current buffers pathname.
+			In the future, it will also be possible to use other
+			variable contexts for this variable, for example, g:.
+
 The Changelog entries are inserted where they add the least amount of text.
 After figuring out the current date and user, the file is searched for an
 entry beginning with the current date and user and if found adds another item

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 7.2b.  Last change: 2007 May 11
+*fold.txt*      For Vim version 7.2.  Last change: 2007 May 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/ft_ada.txt

@@ -1,4 +1,4 @@
-*ft_ada.txt*	For Vim version 7.2b.  Last change: 2008 Jun 21
+*ft_ada.txt*	For Vim version 7.2.  Last change: 2008 Jun 21
 
 
 		    ADA FILE TYPE PLUG-INS REFERENCE MANUAL~

runtime/doc/ft_sql.txt

@@ -1,4 +1,4 @@
-*ft_sql.txt*	For Vim version 7.2b.  Last change: Wed Apr 26 2006 3:05:33 PM
+*ft_sql.txt*	For Vim version 7.2.  Last change: Wed Apr 26 2006 3:05:33 PM
 
 by David Fishburn
 

runtime/doc/gui.txt

@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 7.2b.  Last change: 2008 Jun 14
+*gui.txt*       For Vim version 7.2.  Last change: 2008 Jun 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/gui_w16.txt

@@ -1,4 +1,4 @@
-*gui_w16.txt*   For Vim version 7.2b.  Last change: 2005 Mar 29
+*gui_w16.txt*   For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 7.2b.  Last change: 2007 Aug 30
+*gui_w32.txt*   For Vim version 7.2.  Last change: 2007 Aug 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/gui_x11.txt

@@ -1,4 +1,4 @@
-*gui_x11.txt*   For Vim version 7.2b.  Last change: 2007 Dec 09
+*gui_x11.txt*   For Vim version 7.2.  Last change: 2007 Dec 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/hangulin.txt

@@ -1,4 +1,4 @@
-*hangulin.txt*  For Vim version 7.2b.  Last change: 2006 Apr 02
+*hangulin.txt*  For Vim version 7.2.  Last change: 2006 Apr 02
 
 
 		  VIM REFERENCE MANUAL    by Chi-Deok Hwang and Sung-Hyun Nam

runtime/doc/hebrew.txt

@@ -1,4 +1,4 @@
-*hebrew.txt*    For Vim version 7.2b.  Last change: 2007 Jun 14
+*hebrew.txt*    For Vim version 7.2.  Last change: 2007 Jun 14
 
 
 	   VIM REFERENCE MANUAL    by Ron Aaron (and Avner Lottem)

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 7.2b.  Last change: 2008 Jun 21
+*help.txt*	For Vim version 7.2.  Last change: 2008 Jul 21
 
 			VIM - main help file
 									 k
@@ -126,7 +126,7 @@ Advanced editing ~
 |tabpage.txt|	commands for using multiple tab pages
 |syntax.txt|	syntax highlighting
 |spell.txt|	spell checking
-|diff.txt|	working with two or three versions of the same file
+|diff.txt|	working with two to four versions of the same file
 |autocmd.txt|	automatically executing commands on an event
 |filetype.txt|	settings done specifically for a type of file
 |eval.txt|	expression evaluation, conditional commands

runtime/doc/howto.txt

@@ -1,4 +1,4 @@
-*howto.txt*	For Vim version 7.2b.  Last change: 2006 Apr 02
+*howto.txt*	For Vim version 7.2.  Last change: 2006 Apr 02
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar

runtime/doc/if_cscop.txt

@@ -1,4 +1,4 @@
-*if_cscop.txt*  For Vim version 7.2b.  Last change: 2005 Mar 29
+*if_cscop.txt*  For Vim version 7.2.  Last change: 2009 Mar 18
 
 
 		  VIM REFERENCE MANUAL    by Andy Kahn
@@ -131,11 +131,22 @@ The available subcommands are:
 		7 or f: Find this file
 		8 or i: Find files #including this file
 
+	For all types, except 4 and 6, leading white space for {name} is
+	removed.  For 4 and 6 there is exactly one space between {querytype}
+	and {name}.  Further white space is included in {name}.
+
 	EXAMPLES >
 	    :cscope find c vim_free
-	    :cscope find 3 vim_free
+	    :cscope find 3  vim_free
 <
-	    These two examples perform the same query. >
+	    These two examples perform the same query: functions calling
+	    "vim_free". >
+
+	    :cscope find t initOnce
+	    :cscope find t  initOnce
+<
+	    The first one searches for the text "initOnce", the second one for
+	    " initOnce". >
 
 	    :cscope find 0 DEFAULT_TERM
 <
@@ -344,13 +355,8 @@ cscope version for Win32 see:
 The DJGPP-built version from http://cscope.sourceforge.net is known to not
 work with Vim.
 
-There are a couple of hard-coded limitations:
-
-    1. The maximum number of cscope connections allowed is 8.  Do you
-    really need more?
-
-    2. Doing a |:tjump| when |:cstag| searches the tag files is not
-    configurable (e.g., you can't do a tselect instead).
+Hard-coded limitation: doing a |:tjump| when |:cstag| searches the tag files
+is not configurable (e.g., you can't do a tselect instead).
 
 ==============================================================================
 6. Suggested usage					*cscope-suggestions*
@@ -475,7 +481,8 @@ bit of code) was adapted from the cscope interface in nvi.  Please report
 any problems, suggestions, patches, et al., you have for the usage of
 cscope within Vim to him.
 							*cscope-win32*
-For a cscope version for Win32 see: http://iamphet.nm.ru/cscope/index.html
+For a cscope version for Win32 see:
+	http://code.google.com/p/cscope-win32/
 
 Win32 support was added by Sergey Khorev <sergey.khorev@gmail.com>.  Contact
 him if you have Win32-specific issues.

runtime/doc/if_mzsch.txt

@@ -1,4 +1,4 @@
-*if_mzsch.txt*  For Vim version 7.2b.  Last change: 2008 Jun 28
+*if_mzsch.txt*  For Vim version 7.2.  Last change: 2009 Jun 24
 
 
 		  VIM REFERENCE MANUAL    by Sergey Khorev
@@ -42,10 +42,6 @@ Note: On FreeBSD you should use the "drscheme" port.
 
 							*:mzfile* *:mzf*
 :[range]mzf[ile] {file}	Execute the MzScheme script in {file}.  {not in Vi}
-			All statements are executed in the namespace of the
-			buffer that was current during :mzfile start.
-			If you want to access other namespaces, use
-			'parameterize'.
 
 All of these commands do essentially the same thing - they execute a piece of
 MzScheme code, with the "current range" set to the given line
@@ -54,8 +50,6 @@ range.
 In the case of :mzscheme, the code to execute is in the command-line.
 In the case of :mzfile, the code to execute is the contents of the given file.
 
-Each buffer has its own MzScheme namespace. Global namespace is bound to
-the "global-namespace" value from the 'vimext' module.
 MzScheme interface defines exception exn:vim, derived from exn.
 It is raised for various Vim errors.
 
@@ -79,40 +73,8 @@ To avoid clashes with MzScheme, consider using prefix when requiring module,
 e.g.: >
 	:mzscheme (require (prefix vim- vimext))
 <
-All the examples below assume this naming scheme.  Note that you need to do
-this again for every buffer.
+All the examples below assume this naming scheme. 
 
-The auto-instantiation can be achieved with autocommands, e.g. you can put
-something like this in your .vimrc (EOFs should not have indentation): >
-    function s:MzRequire()
-	if has("mzscheme")
-	    :mz << EOF
-	    (require (prefix vim- vimext))
-	    (let ((buf (vim-get-buff-by-name (vim-eval "expand(\"<afile>\")"))))
-	      (when (and buf (not (eq? buf (vim-curr-buff))))
-		(parameterize ((current-namespace (vim-get-buff-namespace buf)))
-		  (namespace-attach-module vim-global-namespace 'vimext)
-		  (namespace-require '(prefix vim vimext)))))
-    EOF
-	endif
-    endfunction
-
-    function s:MzStartup()
-	if has("mzscheme")
-	    au BufNew,BufNewFile,BufAdd,BufReadPre * :call s:MzRequire()
-	    :mz << EOF
-	    (current-library-collection-paths
-		(cons
-		    (build-path (find-system-path 'addon-dir) (version) "collects")
-		    (current-library-collection-paths)))
-    EOF
-	endif
-    endfunction
-
-    call s:MzStartup()
-<
-
-The global namespace just instantiated this module with the prefix "vimext:".
 							*mzscheme-sandbox*
 When executed in the |sandbox|, access to some filesystem and Vim interface
 procedures is restricted.
@@ -121,15 +83,20 @@ procedures is restricted.
 2. Examples						*mzscheme-examples*
 >
 	:mzscheme (display "Hello")
+	:mz (display (string-append "Using MzScheme version " (version)))
+	:mzscheme (require (prefix vim- vimext)) ; for MzScheme < 4.x
+	:mzscheme (require (prefix-in vim- 'vimext)) ; MzScheme 4.x
 	:mzscheme (vim-set-buff-line 10 "This is line #10")
 <
 Inline script usage: >
 	function! <SID>SetFirstLine()
 	    :mz << EOF
 	    (display "!!!")
+	    (require (prefix vim- vimext))
+	    ; for newer versions (require (prefix-in vim- 'vimext))
 	    (vim-set-buff-line 1 "This is line #1")
 	    (vim-beep)
-	    EOF
+	EOF
 	endfunction
 
 	nmap <F9> :call <SID>SetFirstLine() <CR>
@@ -137,17 +104,33 @@ Inline script usage: >
 File execution: >
 	:mzfile supascript.scm
 <
-Accessing the current buffer namespace from an MzScheme program running in
-another buffer within |:mzfile|-executed script : >
-	; Move to the window below
-	(vim-command "wincmd j")
-	; execute in the context of buffer, to which window belongs
-	; assume that buffer has 'textstring' defined
-	(parameterize ((current-namespace
-			(vim-get-buff-namespace (vim-curr-buff))))
-	 (eval '(vim-set-buff-line 1 textstring)))
+Vim exception handling: >
+	:mz << EOF
+	(require (prefix vim- vimext))
+	; for newer versions (require (prefix-in vim- 'vimext))
+	(with-handlers
+	  ([exn:vim? (lambda (e) (display (exn-message e)))])
+	  (vim-eval "nonsense-string"))
+	EOF
 <
+Auto-instantiation of vimext module (can be placed in your |vimrc|): >
+    function! MzRequire()
+	:redir => l:mzversion
+	:mz (version)
+	:redir END
+	if strpart(l:mzversion, 1, 1) < "4"
+	    " MzScheme versions < 4.x:
+	    :mz (require (prefix vim- vimext))
+	else
+	    " newer versions:
+	    :mz (require (prefix-in vim- 'vimext))
+	endif
+    endfunction
 
+    if has("mzscheme")
+	silent call MzRequire()
+    endif
+<
 ==============================================================================
 3. Threads						*mzscheme-threads*
 
@@ -168,11 +151,11 @@ interface.
 Common
 ------
     (command {command-string})	    Perform the vim ":Ex" style command.
-    (eval {expr-string})	    Evaluate the vim expression to a string.
-				    A |List| is turned into a string by
-				    joining the items and inserting line
-				    breaks.
-				    NOTE clashes with MzScheme eval
+    (eval {expr-string})	    Evaluate the vim expression into
+				    respective MzScheme object: |Lists| are
+				    represented as Scheme lists,
+				    |Dictionaries| as hash tables.
+				    NOTE the name clashes with MzScheme eval
     (range-start)		    Start/End of the range passed with
     (range-end)			    the Scheme command.
     (beep)			    beep
@@ -186,7 +169,6 @@ Common
 				    be set. The symbol 'global can be passed
 				    as {buffer-or-window}. Then |:setglobal|
 				    will be used.
-    global-namespace		    The MzScheme main namespace.
 
 Buffers							 *mzscheme-buffer*
 -------
@@ -228,7 +210,6 @@ Buffers							 *mzscheme-buffer*
 					if there is no such buffer.
     (get-buff-by-num {buffernum})   Get a buffer by its number (return #f if
 				    there is no buffer with this number).
-    (get-buff-namespace [buffer])   Get buffer namespace.
 
 Windows							    *mzscheme-window*
 ------
@@ -250,7 +231,7 @@ Windows							    *mzscheme-window*
     (set-cursor (line . col) [window])  Set cursor position.
 
 ==============================================================================
-5. Dynamic loading					*mzscheme-dynamic*
+5. Dynamic loading				    *mzscheme-dynamic* *E815*
 
 On MS-Windows the MzScheme libraries can be loaded dynamically. The |:version|
 output then includes |+mzscheme/dyn|.

runtime/doc/if_ole.txt

@@ -1,4 +1,4 @@
-*if_ole.txt*    For Vim version 7.2b.  Last change: 2007 May 10
+*if_ole.txt*    For Vim version 7.2.  Last change: 2007 May 10
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore

runtime/doc/if_perl.txt

@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 7.2b.  Last change: 2006 Mar 06
+*if_perl.txt*   For Vim version 7.2.  Last change: 2006 Mar 06
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 7.2b.  Last change: 2006 Apr 30
+*if_pyth.txt*   For Vim version 7.2.  Last change: 2006 Apr 30
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore

runtime/doc/if_ruby.txt

@@ -1,4 +1,4 @@
-*if_ruby.txt*   For Vim version 7.2b.  Last change: 2006 Apr 30
+*if_ruby.txt*   For Vim version 7.2.  Last change: 2006 Apr 30
 
 
 		  VIM REFERENCE MANUAL    by Shugo Maeda

runtime/doc/if_sniff.txt

@@ -1,4 +1,4 @@
-*if_sniff.txt*	For Vim version 7.2b.  Last change: 2005 Mar 29
+*if_sniff.txt*	For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL

runtime/doc/if_tcl.txt

@@ -1,4 +1,4 @@
-*if_tcl.txt*    For Vim version 7.2b.  Last change: 2008 Jun 26
+*if_tcl.txt*    For Vim version 7.2.  Last change: 2008 Jun 26
 
 
 		  VIM REFERENCE MANUAL    by Ingo Wilken

runtime/doc/indent.txt

@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 7.2b.  Last change: 2008 Jun 30
+*indent.txt*    For Vim version 7.2.  Last change: 2008 Jul 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -584,8 +584,8 @@ unnecessary indentation)
 PYTHON							*ft-python-indent*
 
 The amount of indent can be set for the following situations.  The examples
-given are de the defaults.  Note that the variables are set to an expression,
-so that you can change the value of 'shiftwidth' later.
+given are the defaults.  Note that the variables are set to an expression, so
+that you can change the value of 'shiftwidth' later.
 
 Indent after an open paren: >
 	let g:pyindent_open_paren = '&sw * 2'

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.2b.  Last change: 2008 May 04
+*index.txt*     For Vim version 7.2.  Last change: 2008 May 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.2b.  Last change: 2008 Jun 21
+*insert.txt*    For Vim version 7.2.  Last change: 2008 Jun 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 7.2b.  Last change: 2008 Jun 24
+*intro.txt*     For Vim version 7.2.  Last change: 2008 Jun 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.2b.  Last change: 2008 Jul 09
+*map.txt*       For Vim version 7.2.  Last change: 2008 Aug 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -224,6 +224,10 @@ expression is evaluated to obtain the {rhs} that is used.  Example: >
 The result of the InsertDot() function will be inserted.  It could check the
 text before the cursor and start omni completion when some condition is met.
 
+For abbreviations |v:char| is set to the character that was typed to trigger
+the abbreviation.  You can use this to decide how to expand the {lhs}.  You
+can't change v:char and you should not insert it.
+
 Be very careful about side effects!  The expression is evaluated while
 obtaining characters, you may very well make the command dysfunctional.
 For this reason the following is blocked:
@@ -1300,7 +1304,7 @@ The replacement text for a user defined command is scanned for special escape
 sequences, using <...> notation.  Escape sequences are replaced with values
 from the entered command line, and all other text is copied unchanged.  The
 resulting string is executed as an Ex command.  To avoid the replacement use
-<lt> in plade of the initial <.  Thus to include "<bang>" literally use
+<lt> in place of the initial <.  Thus to include "<bang>" literally use
 "<lt>bang>".
 
 The valid escape sequences are

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 7.2b.  Last change: 2008 Jun 21
+*mbyte.txt*     For Vim version 7.2.  Last change: 2008 Jun 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 7.2b.  Last change: 2007 Aug 19
+*message.txt*   For Vim version 7.2.  Last change: 2007 Aug 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/mlang.txt

@@ -1,4 +1,4 @@
-*mlang.txt*     For Vim version 7.2b.  Last change: 2008 Jun 08
+*mlang.txt*     For Vim version 7.2.  Last change: 2008 Jun 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 7.2b.  Last change: 2008 May 02
+*motion.txt*    For Vim version 7.2.  Last change: 2008 Aug 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -851,16 +851,16 @@ when using blockwise Visual mode.  These commands do not work when no change
 was made yet in the current file.
 
 							*'<* *`<*
-'<  `<			To the first character of the last selected Visual
-			area in the current buffer.  For block mode it may
-			also be the last character in the first line (to be
-			able to define the block).  {not in Vi}.
+'<  `<			To the first line or character of the last selected
+			Visual area in the current buffer.  For block mode it
+			may also be the last character in the first line (to
+			be able to define the block).  {not in Vi}.
 
 							*'>* *`>*
-'>  `>			To the last character of the last selected Visual
-			area in the current buffer.  For block mode it may
-			also be the first character of the last line (to be
-			able to define the block).  Note that 'selection'
+'>  `>			To the last line or character of the last selected
+			Visual area in the current buffer.  For block mode it
+			may also be the first character of the last line (to
+			be able to define the block).  Note that 'selection'
 			applies, the position may be just after the Visual
 			area.  {not in Vi}.
 

runtime/doc/netbeans.txt

@@ -1,4 +1,4 @@
-*netbeans.txt*  For Vim version 7.2b.  Last change: 2008 Jun 28
+*netbeans.txt*  For Vim version 7.2.  Last change: 2009 Jan 06
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur et al.
@@ -722,8 +722,10 @@ keyAtPos keyName lnum/col
 		of the cursor.
 		New in version 2.1.
 
-killed		A file was closed by the user.  Only for files that have been
-		assigned a number by the IDE.
+killed		A file was deleted or wiped out by the user and the buffer
+		annotations have been removed.  The bufID number for this
+		buffer has become invalid.  Only for files that have been
+		assigned a bufID number by the IDE.
 
 newDotAndMark off off
 		Reports the position of the cursor being at "off" bytes into

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.2b.  Last change: 2008 Jul 05
+*options.txt*	For Vim version 7.2.  Last change: 2008 Nov 25
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1443,6 +1443,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 	autoselectml	Like "autoselect", but for the modeless selection
 			only.  Compare to the 'A' flag in 'guioptions'.
 
+	html		When the clipboard contains HTML, use this when
+			pasting.  When putting text on the clipboard, mark it
+			as HTML.  This works to copy rendered HTML from
+			Firefox, paste it as raw HTML in Vim, select the HTML
+			in Vim and paste it in a rich edit box in Firefox.
+			Only supported for GTK version 2 and later.
+			Only available with the |+multi_byte| feature.
+
 	exclude:{pattern}
 			Defines a pattern that is matched against the name of
 			the terminal 'term'.  If there is a match, no
@@ -2292,6 +2300,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  or "\\", the swap file name will be built from the complete path to
 	  the file with all path separators substituted to percent '%' signs.
 	  This will ensure file name uniqueness in the preserve directory.
+	  On Win32, when a separating comma is following, you must use "//",
+	  since "\\" will include the comma in the file name.
 	- Spaces after the comma are ignored, other spaces are considered part
 	  of the directory name.  To have a space at the start of a directory
 	  name, precede it with a backslash.
@@ -4173,9 +4183,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	be able to execute Normal mode commands.
 	This is the opposite of the 'keymap' option, where characters are
 	mapped in Insert mode.
-	This only works for 8-bit characters.  The value of 'langmap' may be
-	specified with multi-byte characters (e.g., UTF-8), but only the lower
-	8 bits of each character will be used.
 
 	Example (for Greek, in UTF-8):				*greek*  >
 	    :set langmap=ΑA,ΒB,ΨC,ΔD,ΕE,ΦF,ΓG,ΗH,ΙI,ΞJ,ΚK,ΛL,ΜM,ΝN,ΟO,ΠP,QQ,ΡR,ΣS,ΤT,ΘU,ΩV,WW,ΧX,ΥY,ΖZ,αa,βb,ψc,δd,εe,φf,γg,ηh,ιi,ξj,κk,λl,μm,νn,οo,πp,qq,ρr,σs,τt,θu,ωv,ςw,χx,υy,ζz
@@ -4898,7 +4905,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	name, datestamp and permissions.  This option contains the extra
 	information, the nature of which will vary between systems.
 	The value of this option is usually set when the file is loaded, and
-	use to set the file type when file is written.
+	is used to set the operating system file type when file is written.
 	It can affect the pattern matching of the automatic commands.
 	|autocmd-osfiletypes|
 
@@ -6306,15 +6313,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 	      directory.
 	F S   Full path to the file in the buffer.
 	t S   File name (tail) of file in the buffer.
-	m F   Modified flag, text is " [+]"; " [-]" if 'modifiable' is off.
+	m F   Modified flag, text is "[+]"; "[-]" if 'modifiable' is off.
 	M F   Modified flag, text is ",+" or ",-".
-	r F   Readonly flag, text is " [RO]".
+	r F   Readonly flag, text is "[RO]".
 	R F   Readonly flag, text is ",RO".
-	h F   Help buffer flag, text is " [help]".
+	h F   Help buffer flag, text is "[help]".
 	H F   Help buffer flag, text is ",HLP".
-	w F   Preview window flag, text is " [Preview]".
+	w F   Preview window flag, text is "[Preview]".
 	W F   Preview window flag, text is ",PRV".
-	y F   Type of file in the buffer, e.g., " [vim]".  See 'filetype'.
+	y F   Type of file in the buffer, e.g., "[vim]".  See 'filetype'.
 	Y F   Type of file in the buffer, e.g., ",VIM".  See 'filetype'.
 	      {not available when compiled without |+autocmd| feature}
 	k S   Value of "b:keymap_name" or 'keymap' when |:lmap| mappings are
@@ -6361,14 +6368,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	      to StatusLineNC for the statusline of non-current windows.
 	      The number N must be between 1 and 9.  See |hl-User1..9|
 
-	Display of flags are controlled by the following heuristic:
-	If a flag text starts with comma it is assumed that it wants to
-	separate itself from anything but preceding plaintext.  If it starts
-	with a space it is assumed that it wants to separate itself from
-	anything but other flags.  That is: A leading comma is removed if the
-	preceding character stems from plaintext.  A leading space is removed
-	if the preceding character stems from another active flag.  This will
-	make a nice display when flags are used like in the examples below.
+	When displaying a flag, Vim removes the leading comma, if any, when
+	that flag comes right after plaintext.  This will make a nice display
+	when flags are used like in the examples below.
 
 	When all items in a group becomes an empty string (i.e. flags that are
 	not set) and a minwid is not set for the group, the whole group will
@@ -7475,7 +7477,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not available when compiled without the |+wildignore|
 			feature}
 	A list of file patterns.  A file that matches with one of these
-	patterns is ignored when completing file or directory names.
+	patterns is ignored when completing file or directory names, and
+	influences the result of |expand()|, |glob()| and |globpath()| unless
+	a flag is passed to disable this.
 	The pattern is used like with |:autocmd|, see |autocmd-patterns|.
 	Also see 'suffixes'.
 	Example: >

runtime/doc/os_390.txt

@@ -1,4 +1,4 @@
-*os_390.txt*    For Vim version 7.2b.  Last change: 2005 Mar 29
+*os_390.txt*    For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL	  by Ralf Schandl

runtime/doc/os_amiga.txt

@@ -1,4 +1,4 @@
-*os_amiga.txt*  For Vim version 7.2b.  Last change: 2005 Mar 29
+*os_amiga.txt*  For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_beos.txt

@@ -1,4 +1,4 @@
-*os_beos.txt*	For Vim version 7.2b.  Last change: 2005 Mar 29
+*os_beos.txt*	For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_dos.txt

@@ -1,4 +1,4 @@
-*os_dos.txt*    For Vim version 7.2b.  Last change: 2006 Mar 30
+*os_dos.txt*    For Vim version 7.2.  Last change: 2006 Mar 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_mac.txt

@@ -1,4 +1,4 @@
-*os_mac.txt*    For Vim version 7.2b.  Last change: 2006 Apr 30
+*os_mac.txt*    For Vim version 7.2.  Last change: 2006 Apr 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar et al.

runtime/doc/os_mint.txt

@@ -1,4 +1,4 @@
-*os_mint.txt*   For Vim version 7.2b.  Last change: 2005 Mar 29
+*os_mint.txt*   For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Jens M. Felderhoff

runtime/doc/os_msdos.txt

@@ -1,4 +1,4 @@
-*os_msdos.txt*  For Vim version 7.2b.  Last change: 2005 Mar 29
+*os_msdos.txt*  For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_os2.txt

@@ -1,4 +1,4 @@
-*os_os2.txt*    For Vim version 7.2b.  Last change: 2007 Apr 22
+*os_os2.txt*    For Vim version 7.2.  Last change: 2007 Apr 22
 
 
 		  VIM REFERENCE MANUAL    by Paul Slootman

runtime/doc/os_qnx.txt

@@ -1,4 +1,4 @@
-*os_qnx.txt*    For Vim version 7.2b.  Last change: 2005 Mar 29
+*os_qnx.txt*    For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Julian Kinraid

runtime/doc/os_risc.txt

@@ -1,4 +1,4 @@
-*os_risc.txt*   For Vim version 7.2b.  Last change: 2008 Jun 28
+*os_risc.txt*   For Vim version 7.2.  Last change: 2008 Jun 28
 
 
 		  VIM REFERENCE MANUAL    by Thomas Leonard

runtime/doc/os_unix.txt

@@ -1,4 +1,4 @@
-*os_unix.txt*   For Vim version 7.2b.  Last change: 2005 Mar 29
+*os_unix.txt*   For Vim version 7.2.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_vms.txt

@@ -1,4 +1,4 @@
-*os_vms.txt*    For Vim version 7.2b.  Last change: 2006 Nov 18
+*os_vms.txt*    For Vim version 7.2.  Last change: 2008 Aug 19
 
 
 		  VIM REFERENCE MANUAL
@@ -312,7 +312,7 @@ features, it is worth to choose non GUI executables.
 
 8. Useful notes						*vms-notes*
 
-8.1 backspace/delete
+8.1 Backspace/delete
 8.2 Filters
 8.3 VMS file version numbers
 8.4 Directory conversion
@@ -326,8 +326,10 @@ features, it is worth to choose non GUI executables.
 8.12 diff-mode
 8.13 Allow '$' in C keywords
 8.14 VIMTUTOR for beginners
+8.15 Slow start in console mode issue 
+8.16 Common VIM directory - different architectures 
 
-8.1 backspace/delete
+8.1 Backspace/delete
 
 There are backspace/delete key inconsistencies with VMS.
 :fixdel doesn't do the trick, but the solution is: >
@@ -663,12 +665,130 @@ start it with: >
 
 (Thomas.R.Wyant III, Vim 6.1)
 
+8.14 Slow start in console mode issue
+
+As GUI/GTK Vim works equally well in console mode, many administartors
+deploy those executables system wide.
+Unfortunately, on a remote slow connections GUI/GTK executables behave rather
+slow when user wants to run Vim just in the console mode - because of X environment detection timeout.
+
+Luckily, there is a simple solution for that. Administrators need to deploy
+both GUI/GTK build and just console build executables, like below: >
+
+    |- vim72
+    |----- doc
+    |----- syntax        
+       vimrc    (system rc files)
+       gvimrc
+       gvim.exe (the remaned GUI or GTK built vim.exe)      
+       vim.exe  (the console only executable) 
+
+Define system symbols like below in for ex in LOGIN.COM or SYLOGIN.COM: >
+
+	$ define/nolog VIM RF10:[UTIL.VIM72] ! where you VIM directory is
+	$ vi*m  :== mcr VIM:VIM.EXE
+	$ gvi*m :== mcr VIM:GVIM.EXE
+	$ ! or you can try to spawn with
+	$ gv*im :== spawn/nowait/input=NLA0 mcr VIM:GVIM.EXE -g -GEOMETRY 80x40
+
+
+Like this, users that do not have X environment and want to use Vim just in 
+console mode can avoid performance problems.
+
+(Zoltan Arpadffy, Vim 7.2)
+
+8.15 Common VIM directory - different architectures
+
+In a cluster that contains nodes with different architectures like below:
+
+$show cluster
+View of Cluster from system ID 11655  node: TOR                                                                     18-AUG-2008 11:58:31
++---------------------------------+
+<EFBFBD>        SYSTEMS        <20> MEMBERS <20>
++-----------------------+---------<2D>
+<EFBFBD>  NODE  <20>   SOFTWARE   <20>  STATUS <20>
++--------+--------------+---------<2D>
+<EFBFBD> TOR    <20> VMS V7.3-2   <20> MEMBER  <20>
+<EFBFBD> TITAN2 <20> VMS V8.3     <20> MEMBER  <20>
+<EFBFBD> ODIN   <20> VMS V7.3-2   <20> MEMBER  <20>
++---------------------------------+
+
+It is convinient to have a common VIM directory but execute different
+executables. 
+There are more solutions for this problem:
+
+solution 1. all executables in the same directory with different names
+This is easily done with the following script that can be added
+to the login.com or sylogin.com: >
+
+	$ if f$getsyi("NODE_HWTYPE") .eqs. "VAX"
+	$ then
+	$       say "VAX platform"
+	$       vi*m:== mcr vim:VIM.EXE_VAX
+	$ endif
+	$ if f$getsyi("NODE_HWTYPE") .eqs. "ALPH"
+	$ then
+	$       say "ALPHA platform"
+	$       vi*m :== mcr vim:VIM.EXE_AXP
+	$ endif
+	$ if f$getsyi("ARCH_NAME") .eqs. "IA64"
+	$ then
+	$      say "IA64 platform"
+	$      vi*m :== mcr vim:VIM.EXE_IA64
+	$ endif
+
+solution 2. different directories: >
+
+	$ if f$getsyi("NODE_HWTYPE") .eqs. "VAX"
+	$ then
+	$       say "VAX platform"
+	$       define/nolog VIM RF10:[UTIL.VAX_EXE] ! VAX executables
+	$ endif
+	$ if f$getsyi("NODE_HWTYPE") .eqs. "ALPH"
+	$ then
+	$       say "ALPHA platform"
+	$       define/nolog VIM RF10:[UTIL.AXP_EXE] ! AXP executables
+	$ endif
+	$ if f$getsyi("ARCH_NAME") .eqs. "IA64"
+	$ then
+	$      say "IA64 platform"
+	$      define/nolog VIM RF10:[UTIL.IA64_EXE] ! IA64 executables
+	$ endif
+        $! VIMRUNTIME must be defined in order to find runtime files
+	$ define/nolog VIMRUNTIME RF10:[UTIL.VIM72]
+
+A good examle for this approach is the [GNU]gnu_tools.com script from GNU_TOOLS.ZIP
+package downloadable from http://www.polarhome.com/vim/
+
+(Zoltan Arpadffy, Vim 7.2)
+
 ==============================================================================
 
 9. VMS related changes					*vms-changes*
 
-Version 7
+Recent changes
+- The following plugins are included into VMS runtime: 
+  genutils 2.4, multiselect 2.2, multvals 3.1, selectbuf 4.3,
+  bufexplorer 7.1.7, taglist 4.5
+- minor changes in vimrc (just in VMS runtime) 
+- make_vms.mms - HUGE model is the default
+- [TESTDIR]make_vms.mms include as many tests possible
+- modify test30 and test54 for VMS
+- enable FLOAT feature in VMS port
+- os_vms.txt updated  
+
+Version 7.2 (2008 Aug 9)
+- VCF files write corrected
+- CTAGS 5.7 included
+- corrected make_vms.mms (on VAX gave syntax error) 
+
+Version 7.1 (2007 Jun 15)
+- create TAGS file from menu 
+
+Version 7 (2006 May 8)
 - Improved low level char input (affects just console mode)
+- Fixed plugin bug
+- CTAGS 5.6 included
 
 Version 6.4 (2005 Oct 15)
 - GTKLIB and Vim build on IA64
@@ -806,6 +926,7 @@ Version 4.5 (1996 Dec 16)
 
 OpenVMS documentation and executables are maintained by:
 Zoltan Arpadffy <arpadffy@polarhome.com>
+OpenVMS Vim page: http://www.polarhome.com/vim/
 
 This document uses parts and remarks from earlier authors and contributors
 of OS_VMS.TXT:

runtime/doc/os_win32.txt

@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 7.2b.  Last change: 2008 May 02
+*os_win32.txt*  For Vim version 7.2.  Last change: 2008 May 02
 
 
 		  VIM REFERENCE MANUAL    by George Reilly

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 7.2b.  Last change: 2008 Jun 21
+*pattern.txt*   For Vim version 7.2.  Last change: 2008 Jul 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1122,7 +1122,7 @@ in the file.  {Vi cannot handle <Nul> characters in the file at all}
 
 						*CR-used-for-NL*
 When 'fileformat' is "mac", <NL> characters in the file are stored as <CR>
-characters internally.  In the display they are shown as "^M".  Otherwise this
+characters internally.  In the text they are shown as "^J".  Otherwise this
 works similar to the usage of <NL> for a <Nul>.
 
 When working with expression evaluation, a <NL> character in the pattern

runtime/doc/pi_getscript.txt

@@ -1,4 +1,4 @@
-*pi_getscript.txt*  For Vim version 7.2b.  Last change: 2008 Jun 29
+*pi_getscript.txt*  For Vim version 7.2.  Last change: 2008 Jun 29
 >
 		GETSCRIPT REFERENCE MANUAL  by Charles E. Campbell, Jr.
 <

runtime/doc/pi_gzip.txt

@@ -1,4 +1,4 @@
-*pi_gzip.txt*   For Vim version 7.2b.  Last change: 2002 Oct 29
+*pi_gzip.txt*   For Vim version 7.2.  Last change: 2002 Oct 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/pi_netrw.txt

@@ -1,4 +1,4 @@
-*pi_netrw.txt*  For Vim version 7.2b.  Last change: 2008 Jul 13
+*pi_netrw.txt*  For Vim version 7.2.  Last change: 2008 Aug 08
 
 	    -----------------------------------------------------
 	    NETRW REFERENCE MANUAL    by Charles E. Campbell, Jr.
@@ -1437,21 +1437,56 @@ tips & tools" by Rob Flickenger (O'Reilly, ISBN 0-596-00461-3) gives a tip
 for setting up no-password ssh and scp and discusses associated security
 issues.  It used to be available at http://hacks.oreilly.com/pub/h/66 ,
 but apparently that address is now being redirected to some "hackzine".
-I'll attempt a summary:
+I'll attempt a summary based on that article and on a communication from
+Ben Schmidt:
 
-	1. Generate a public/private key pair on the ssh server:
-	   ssh-keygen -t rsa
-	   (saving the file in ~/.ssh/id_rsa is ok)
-	2. Just hit the <CR> when asked for passphrase (twice).
-	3. This creates two files:
-	     ~/.ssh/id_rsa
-	     ~/.ssh/id_rsa.pub
-	4. On the client:
-	    cd
-	    mkdir .ssh
-	    chmod 0700 .ssh
-	    scp {serverhostname}:.ssh/id_rsa.pub .
-	    cat id_rsa.pub >> .ssh/authorized_keys2
+	1. Generate a public/private key pair on the local machine
+	   (ssh client): >
+		ssh-keygen -t rsa
+		(saving the file in ~/.ssh/id_rsa as prompted)
+<
+	2. Just hit the <CR> when asked for passphrase (twice) for no
+	   passphrase.  If you do use a passphrase, you will also need to use
+	   ssh-agent so you only have to type the passphrase once per session.
+	   If you don't use a passphrase, simply logging onto your local
+	   computer or getting access to the keyfile in any way will suffice
+	   to access any ssh servers which have that key authorized for login.
+
+	3. This creates two files: >
+		~/.ssh/id_rsa
+		~/.ssh/id_rsa.pub
+<
+	4. On the target machine (ssh server): >
+		cd
+		mkdir -p .ssh
+		chmod 0700 .ssh
+<
+	5. On your local machine (ssh client): (one line) >
+		ssh {serverhostname}
+		  cat '>>' '~/.ssh/authorized_keys2' < ~/.ssh/id_rsa.pub
+<
+	   or, for OpenSSH, (one line) >
+		ssh {serverhostname}
+		  cat '>>' '~/.ssh/authorized_keys' < ~/.ssh/id_rsa.pub
+<
+You can test it out with >
+	ssh {serverhostname}
+and you should be log onto the server machine without further need to type
+anything.
+
+If you decided to use a passphrase, do: >
+	ssh-agent $SHELL
+	ssh-add
+	ssh {serverhostname}
+You will be prompted for your key passphrase when you use ssh-add, but not
+subsequently when you use ssh.  For use with vim, you can use >
+	ssh-agent vim
+and, when next within vim, use >
+	:!ssh-add
+Alternatively, you can apply ssh-agent to the terminal you're planning on
+running vim in: >
+	ssh-agent xterm &
+and do ssh-add whenever you need.
 
 For Windows, folks on the vim mailing list have mentioned that Pageant helps
 with avoiding the constant need to enter the password.
@@ -1628,6 +1663,13 @@ MARKED FILES: MOVING						*netrw-mm* {{{2
 	    (See |netrw-mf| and |netrw-mr| for how to mark files)
 		      (uses the global marked file list)
 
+	WARNING: moving files is more dangerous than copying them.
+	A file being moved is first copied and then deleted; if the
+	copy operation fails and the delete succeeds, you will lose
+	the file.  Either try things out with unimportant files
+	first or do the copy and then delete yourself using mc and D.
+	Use at your own risk!
+
 Select a target directory with mT (|netrw-mt|).  Then change directory,
 select file(s) (see |netrw-mf|), and press "mm".
 
@@ -2387,6 +2429,20 @@ which is loaded automatically at startup (assuming :set nocp).
 ==============================================================================
 12. History						*netrw-history* {{{1
 
+	v132: Aug 06, 2008 * Fixed marked file-based obtain
+	      Aug 08, 2008 * sourcing a file via ftp from a netrw-generated
+	                     buffer (or any buffer with |'nobl'|) left an
+			     empty no-name buffer in its wake.  Fixed.
+	v130: Jul 31, 2008 * trying out elinks/links for http://host/
+			     requests.  One problem: in-page links
+			     (such as with ...#LABEL) are not supported
+			   * verified that Bram's modified netrwPlugin works
+	      Aug 01, 2008 * fixed a bug: when sourcing a file via ftp, the
+			     "filter window" was left behind.
+	v129: Jul 31, 2008 * bug found in non-mouse enabled vim and some
+			     local maps
+	v128: Jul 30, 2008 * much work done in using shellescape() and
+			     fnameescape()
 	v126: Jun 30, 2008 * after having gone to a remote directory,
 	                     <f1> was no longer taking one to the correct
 			     entry in the help (|netrw-quickhelp|).  Fixed.

runtime/doc/pi_paren.txt

@@ -1,4 +1,4 @@
-*pi_paren.txt*  For Vim version 7.2b.  Last change: 2008 Jun 16
+*pi_paren.txt*  For Vim version 7.2.  Last change: 2008 Jun 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/pi_spec.txt

@@ -1,4 +1,4 @@
-*pi_spec.txt*   For Vim version 7.2b.  Last change: 2006 Apr 24
+*pi_spec.txt*   For Vim version 7.2.  Last change: 2006 Apr 24
 
 by Gustavo Niemeyer ~
 

runtime/doc/pi_tar.txt

@@ -1,4 +1,4 @@
-*pi_tar.txt*	For Vim version 7.2b.  Last change: 2008 Jul 13
+*pi_tar.txt*	For Vim version 7.2.  Last change: 2008 Aug 09
 
 		       +====================+
 		       | Tar File Interface |
@@ -37,12 +37,24 @@ Copyright 2005-2008: The GPL (gnu public license) applies to	*tar-copyright*
    *g:tar_readoptions*    "OPxf"  used to extract a file from a tarball
    *g:tar_cmd*            "tar"   the name of the tar program
    *g:tar_nomax*            0     if true, file window will not be maximized
+   *g:tar_secure*         undef   if exists:
+					"--" will be used to prevent unwanted
+					option expansion in tar commands.
+					Please be sure that your tar command
+					accepts "--"; Posix compliant tar
+					utilities do accept it.
+				  if not exists:
+					The tar plugin will reject any member
+					files that begin with "-"
+				  Not all tar's support the "--" which is why
+				  it isn't default.
    *g:tar_writeoptions*   "uf"    used to update/replace a file
 
 
 ==============================================================================
 4. History						*tar-history*
 
+   v22 Aug 08, 2008 * security fixes
    v16 Jun 06, 2008 * tarfile:: used instead of tarfile: when editing files
 		      inside tarballs.  Fixes a problem with tarballs called
 		      things like c:\abc.tar. (tnx to Bill McCarthy)

runtime/doc/pi_vimball.txt

@@ -1,4 +1,4 @@
-*pi_vimball.txt*	For Vim version 7.2b.  Last change: 2008 Jun 05
+*pi_vimball.txt*	For Vim version 7.2.  Last change: 2008 Jul 30
 
 			       ----------------
 			       Vimball Archiver

runtime/doc/pi_zip.txt

@@ -1,4 +1,4 @@
-*pi_zip.txt*	For Vim version 7.2b.  Last change: 2008 Jun 29
+*pi_zip.txt*	For Vim version 7.2.  Last change: 2008 Jul 30
 
 				+====================+
 				| Zip File Interface |

runtime/doc/print.txt

@@ -1,4 +1,4 @@
-*print.txt*     For Vim version 7.2b.  Last change: 2008 Apr 30
+*print.txt*     For Vim version 7.2.  Last change: 2008 Apr 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 7.2b.  Last change: 2008 Mar 14
+*quickfix.txt*  For Vim version 7.2.  Last change: 2008 Mar 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 7.2b.  Last change: 2008 Jan 22
+*quickref.txt*  For Vim version 7.2.  Last change: 2008 Jan 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/quotes.txt

@@ -1,4 +1,4 @@
-*quotes.txt*    For Vim version 7.2b.  Last change: 2006 Apr 24
+*quotes.txt*    For Vim version 7.2.  Last change: 2006 Apr 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/recover.txt

@@ -1,4 +1,4 @@
-*recover.txt*   For Vim version 7.2b.  Last change: 2006 Apr 24
+*recover.txt*   For Vim version 7.2.  Last change: 2006 Apr 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/remote.txt

@@ -1,4 +1,4 @@
-*remote.txt*    For Vim version 7.2b.  Last change: 2008 May 24
+*remote.txt*    For Vim version 7.2.  Last change: 2008 May 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 7.2b.  Last change: 2007 Aug 12
+*repeat.txt*    For Vim version 7.2.  Last change: 2007 Aug 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/rileft.txt

@@ -1,4 +1,4 @@
-*rileft.txt*    For Vim version 7.2b.  Last change: 2006 Apr 24
+*rileft.txt*    For Vim version 7.2.  Last change: 2006 Apr 24
 
 
 		  VIM REFERENCE MANUAL    by Avner Lottem