updated for version 7.4.257

Problem:    Compiler warning, possibly for mismatch in parameter name.
Solution:   Rename the parameter in the declaration.

.gitignore

@@ -36,12 +36,29 @@ src/Obj*/pathdef.c
 gvimext.dll
 gvimext.lib
 
+# Borland C++
+bcc.cfg
+*.ilc
+*.ild
+*.ilf
+*.ils
+*.map
+*.tds
+
+# NetBeans
+nbproject/*
+
+# Mac OSX
+src/xxd/xxd.dSYM
+
 # All platforms
 *.rej
 *.orig
 *.mo
 *.swp
 *~
+*.pyc
+*.log
 src/po/vim.pot
 
 # Generated by "make test"
@@ -52,3 +69,4 @@ src/testdir/lua.vim
 src/testdir/small.vim 
 src/testdir/tiny.vim 
 src/testdir/test*.out
+src/testdir/test.log

Contents

@@ -9,10 +9,10 @@ Vim		Vi IMproved.  A clone of the UNIX text editor Vi.  Very useful
 		messages, shows current file name in window title, on-line
 		help, rectangular cut/paste, etc., etc., etc...
 
-		Version 7.3.  Also runs under UNIX, MSDOS and other systems.
-		vim73rt.tgz  contains the documentation and syntax files.
-		vim73bin.tgz contains the binaries.
-		vim73src.tgz contains the sources.
+		Version 7.4.  Also runs under UNIX, MSDOS and other systems.
+		vim74rt.tgz  contains the documentation and syntax files.
+		vim74bin.tgz contains the binaries.
+		vim74src.tgz contains the sources.
 		Author: Bram Moolenaar et al.
 
 

Filelist

@@ -80,10 +80,23 @@ SRC_ALL =	\
 		src/main.aap \
 		src/testdir/main.aap \
 		src/testdir/*.in \
+		src/testdir/sautest/autoload/*.vim \
 		src/testdir/test[0-9]*.ok \
+		src/testdir/test[0-9]*a.ok \
+		src/testdir/test_[a-z]*.ok \
 		src/testdir/test49.vim \
 		src/testdir/test60.vim \
 		src/testdir/test83-tags? \
+		src/testdir/test77a.com \
+		src/testdir/python2/*.py \
+		src/testdir/python3/*.py \
+		src/testdir/pythonx/*.py \
+		src/testdir/pythonx/topmodule/__init__.py \
+		src/testdir/pythonx/topmodule/submodule/__init__.py \
+		src/testdir/pythonx/topmodule/submodule/subsubmodule/__init__.py \
+		src/testdir/pythonx/topmodule/submodule/subsubmodule/subsubsubmodule.py \
+		src/testdir/python_after/*.py \
+		src/testdir/python_before/*.py \
 		src/proto.h \
 		src/proto/blowfish.pro \
 		src/proto/buffer.pro \
@@ -685,6 +698,7 @@ LANG_GEN = \
 		runtime/doc/*-fr.UTF-8.1 \
 		runtime/doc/*-it.1 \
 		runtime/doc/*-it.UTF-8.1 \
+		runtime/doc/*-ja.UTF-8.1 \
 		runtime/doc/*-pl.1 \
 		runtime/doc/*-pl.UTF-8.1 \
 		runtime/doc/*-ru.1 \

Makefile

@@ -74,14 +74,17 @@ all install uninstall tools config configure reconfig proto depend lint tags typ
 #    Before creating an archive first delete all backup files, *.orig, etc.
 
 MAJOR = 7
-MINOR = 3
+MINOR = 4
 
 # Uncomment this line if the Win32s version is to be included.
-DOSBIN_S =  dosbin_s
+# DOSBIN_S =  dosbin_s
 
 # Uncomment this line if the 16 bit DOS version is to be included.
 # DOSBIN_D16 = dosbin_d16
 
+# Uncomment this line if the 32 bit DOS version is to be included.
+# DOSBIN_D32 = dosbin_d32
+
 # CHECKLIST for creating a new version:
 #
 # - Update Vim version number.  For a test version in: src/version.h, Contents,
@@ -89,8 +92,6 @@ DOSBIN_S =  dosbin_s
 #   runtime/doc/*.txt and nsis/gvim.nsi. Other things in README_os2.txt.  For a
 #   minor/major version: src/GvimExt/GvimExt.reg, src/vim.def, src/vim16.def,
 #   src/gvim.exe.mnf.
-# - Adjust the date and other info in src/version.h.
-# - Correct included_patches[] in src/version.c.
 # - Compile Vim with GTK, Perl, Python, Python3, TCL, Ruby, MZscheme, Lua (if
 #   you can make it all work), Cscope and "huge" features.  Exclude workshop
 #   and SNiFF.
@@ -99,8 +100,14 @@ DOSBIN_S =  dosbin_s
 # - With these features: "make depend" (works best with gcc).
 # - If you have a lint program: "make lint" and check the output (ignore GTK
 #   warnings).
-# - Enable the efence library in "src/Makefile" and run "make test".  Disable
-#   Python and Ruby to avoid trouble with threads (efence is not threadsafe).
+# - If you have valgrind, enable it in src/testdir/Makefile and run "make
+#   test".  Enable EXITFREE, disable GUI, scheme and tcl to avoid false alarms.
+#   Check the valgrind output.
+# - If you have the efence library, enable it in "src/Makefile" and run "make
+#   test".  Disable Python and Ruby to avoid trouble with threads (efence is
+#   not threadsafe).
+# - Adjust the date and other info in src/version.h.
+# - Correct included_patches[] in src/version.c.
 # - Check for missing entries in runtime/makemenu.vim (with checkmenu script).
 # - Check for missing options in runtime/optwin.vim et al. (with check.vim).
 # - Do "make menu" to update the runtime/synmenu.vim file.
@@ -108,8 +115,8 @@ DOSBIN_S =  dosbin_s
 # - Check that runtime/doc/help.txt doesn't contain entries in "LOCAL
 #   ADDITIONS".
 # - In runtime/doc run "make" and "make html" to check for errors.
-# - Check if src/Makefile and src/feature.h don't contain any personal
-#   preferences or the GTK, Perl, etc. mentioned above.
+# - Check if src/Makefile, src/testdir/Makefile and src/feature.h don't contain
+#   any personal preferences or the changes mentioned above.
 # - Check file protections to be "644" for text and "755" for executables (run
 #   the "check" script).
 # - Check compiling on Amiga, MS-DOS and MS-Windows.
@@ -128,36 +135,20 @@ DOSBIN_S =  dosbin_s
 # PC:
 # - Run make on Unix to update the ".mo" files.
 # - "make dossrc" and "make dosrt".  Unpack the archives on a PC.
-# 16 bit DOS version: (OBSOLETE, 16 bit version doesn't build)
-# - Set environment for compiling with Borland C++ 3.1.
-# - "bmake -f Make_bc3.mak BOR=E:\borlandc" (compiling xxd might fail, in that
-#   case set environment for compiling with Borland C++ 4.0 and do
-#   "make -f make_bc3.mak BOR=E:\BC4 xxd/xxd.exe").
-#   NOTE: this currently fails because Vim is too big.
-# - "make test" and check the output.
-# - Rename the executables to "vimd16.exe", "xxdd16.exe", "installd16.exe" and
-#   "uninstald16.exe".
-# 32 bit DOS version:
-# - Set environment for compiling with DJGPP; "gmake -f Make_djg.mak".
-# - "rm testdir/*.out", "gmake -f Make_djg.mak test" and check the output for
-#   "ALL DONE".
-# - Rename the executables to "vimd32.exe", "xxdd32.exe", "installd32.exe" and
-#   "uninstald32.exe".
 # Win32 console version:
-# - Set environment for Visual C++ 2008, e.g.:
-#   "E:\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat".  Or, when using the
-#   Visual C++ Toolkit 2003: "msvcsetup.bat" (adjust the paths when necessary).
-#   For Windows 98/ME the 2003 version is required, but then it won't work on
-#   Windows 7 and 64 bit.
-# - "nmake -f Make_mvc.mak"
+# - Set environment for Visual C++ 2008, e.g.: "msvc2008.bat"  Or:
+#   "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat".
+#   Or, when using the Visual C++ Toolkit 2003: "msvcsetup.bat" (adjust the
+#   paths when necessary).
+#   For Windows 98/ME the 2003 version is required, but then the executable
+#   won't work on Windows 7 and 64 bit systems.
+# - "nmake -f Make_mvc.mak"  (use the same path as for vcvars32.bat)
 # - "rm testdir/*.out", "nmake -f Make_mvc.mak test" and check the output.
-# - Rename the executables to "vimw32.exe", "xxdw32.exe".
+# - Rename vim.exe to vimw32.exe, xxd/xxd.exe to xxdw32.exe.
 # - Rename vim.pdb to vimw32.pdb.
-# - When building the Win32s version later, delete vimrun.exe, install.exe and
-#   uninstal.exe.  Otherwise rename executables to installw32.exe and
-#   uninstalw32.exe.
+# - Rename install.exe to installw32.exe and uninstal.exe to uninstalw32.exe.
 # Win32 GUI version:
-# - "nmake -f Make_mvc.mak GUI=yes.
+# - "nmake -f Make_mvc.mak GUI=yes"
 # - move "gvim.exe" to here (otherwise the OLE version will overwrite it).
 # - Move gvim.pdb to here.
 # - Delete vimrun.exe, install.exe and uninstal.exe.
@@ -167,23 +158,13 @@ DOSBIN_S =  dosbin_s
 # - Rename "gvim.exe" to "gvim_ole.exe".
 # - Rename gvim.pdb to "gvim_ole.pdb".
 # - Delete install.exe and uninstal.exe.
-# - If building the Win32s version delete vimrun.exe.
-# Win32s GUI version:
-# - Set environment for Visual C++ 4.1 (requires a new console window):
-#   "vcvars32.bat" (use the path for VC 4.1 e:\msdev\bin)
-# - "nmake -f Make_mvc.mak GUI=yes INTL=no clean" (use the path for VC 4.1)
-# - "nmake -f Make_mvc.mak GUI=yes INTL=no" (use the path for VC 4.1)
-# - Rename "gvim.exe" to "gvim_w32s.exe".
-# - Rename "install.exe" to "installw32.exe"
-# - Rename "uninstal.exe" to "uninstalw32.exe"
-# - The produced uninstalw32.exe and vimrun.exe are used.
 # Create the archives:
 # - Copy all the "*.exe" files to where this Makefile is.
 # - Copy all the "*.pdb" files to where this Makefile is.
 # - "make dosbin".
 # NSIS self installing exe:
 # - To get NSIS see http://nsis.sourceforge.net
-# - Make sure gvim_ole.exe, vimd32.exe, vimw32.exe, installw32.exe,
+# - Make sure gvim_ole.exe, vimw32.exe, installw32.exe,
 #   uninstalw32.exe and xxdw32.exe have been build as mentioned above.
 # - copy these files (get them from a binary archive or build them):
 #	gvimext.dll in src/GvimExt
@@ -196,7 +177,44 @@ DOSBIN_S =  dosbin_s
 # - go to ../nsis and do "makensis gvim.nsi" (takes a few minutes).
 # - Copy gvim##.exe to the dist directory.
 #
-# OS/2: (OBSOLETE, OS/2 version is no longer distributed)
+# 64 bit builds (these are not in the normal distribution, the 32 bit build
+# works just fine on 64 bit systems).
+# Like the console and GUI version, but first run vcvars64.bat or
+#   "..\VC\vcvarsall.bat x86_amd64".
+# - "nmake -f Make_mvc.mak"
+# - "nmake -f Make_mvc.mak GUI=yes"
+# Or run src/bigvim64.bat for an OLE version.
+#
+# OBSOLETE systems: You can build this if you have an appropriate system.
+#
+# 16 bit DOS version: (doesn't build anywhere)
+# - Set environment for compiling with Borland C++ 3.1.
+# - "bmake -f Make_bc3.mak BOR=E:\borlandc" (compiling xxd might fail, in that
+#   case set environment for compiling with Borland C++ 4.0 and do
+#   "make -f make_bc3.mak BOR=E:\BC4 xxd/xxd.exe").
+#   NOTE: this currently fails because Vim is too big.
+# - "make test" and check the output.
+# - Rename the executables to "vimd16.exe", "xxdd16.exe", "installd16.exe" and
+#   "uninstald16.exe".
+#
+# 32 bit DOS version: (requires Windows XP or earlier)
+# - Set environment for compiling with DJGPP; "gmake -f Make_djg.mak".
+# - "rm testdir/*.out", "gmake -f Make_djg.mak test" and check the output for
+#   "ALL DONE".
+# - Rename the executables to "vimd32.exe", "xxdd32.exe", "installd32.exe" and
+#   "uninstald32.exe".
+#
+# Win32s GUI version: (requires very old compiler)
+# - Set environment for Visual C++ 4.1 (requires a new console window):
+#   "vcvars32.bat" (use the path for VC 4.1 e:\msdev\bin)
+# - "nmake -f Make_mvc.mak GUI=yes INTL=no clean" (use the path for VC 4.1)
+# - "nmake -f Make_mvc.mak GUI=yes INTL=no" (use the path for VC 4.1)
+# - Rename "gvim.exe" to "gvim_w32s.exe".
+# - Rename "install.exe" to "installw32.exe"
+# - Rename "uninstal.exe" to "uninstalw32.exe"
+# - The produced uninstalw32.exe and vimrun.exe are used.
+#
+# OS/2: (requires an OS/2 system)
 # - Unpack the Unix archive.
 # - "make -f Make_os2.mak".
 # - Rename the executables to vimos2.exe, xxdos2.exe and teeos2.exe and copy
@@ -295,6 +313,8 @@ unixall: dist prepare
 		$(LANG_SRC) \
 		| (cd dist/$(VIMRTDIR); tar xf -)
 # Need to use a "distclean" config.mk file
+# Note: this file is not included in the repository to avoid problems, but it's
+# OK to put it in the archive.
 	cp -f src/config.mk.dist dist/$(VIMRTDIR)/src/auto/config.mk
 # Create an empty config.h file, make dependencies require it
 	touch dist/$(VIMRTDIR)/src/auto/config.h
@@ -450,7 +470,7 @@ runtime_unix2dos: dosrt_unix2dos
 	cd dist/vim/$(VIMRTDIR); tar cf - * \
 		| (cd ../../../runtime/dos; tar xf -)
 
-dosbin: prepare dosbin_gvim dosbin_w32 dosbin_d32 dosbin_ole $(DOSBIN_S) $(DOSBIN_D16)
+dosbin: prepare dosbin_gvim dosbin_w32 $(DOSBIN_D32) dosbin_ole $(DOSBIN_S) $(DOSBIN_D16)
 
 # make Win32 gvim
 dosbin_gvim: dist no_title.vim dist/$(COMMENT_GVIM)

README.txt

@@ -1,4 +1,4 @@
-README.txt for version 7.3 of Vim: Vi IMproved.
+README.txt for version 7.4 of Vim: Vi IMproved.
 
 
 WHAT IS VIM

README_ami.txt

@@ -1,4 +1,4 @@
-README_ami.txt for version 7.3 of Vim: Vi IMproved.
+README_ami.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Amiga systems.
 See README.txt for general information about Vim.

README_amibin.txt

@@ -1,4 +1,4 @@
-README_amibin.txt for version 7.3 of Vim: Vi IMproved.
+README_amibin.txt for version 7.4 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_ami.txt" for installation instructions for the Amiga.

README_amisrc.txt

@@ -1,4 +1,4 @@
-README_amisrc.txt for version 7.3 of Vim: Vi IMproved.
+README_amisrc.txt for version 7.4 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_ami.txt" for installation instructions for the Amiga.

README_bindos.txt

@@ -1,19 +1,16 @@
-README_bindos.txt for version 7.3 of Vim: Vi IMproved.
+README_bindos.txt for version 7.4 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim73rt.zip).
+These files are in the runtime archive (vim74rt.zip).
 
 
 There are several binary distributions of Vim for the PC.  You would normally
 pick only one of them, but it's also possible to install several.
 These ones are available (the version number may differ):
-	vim73d16.zip	16 bit DOS version
-	vim73d32.zip	32 bit DOS version
-	vim73w32.zip	Windows 95/98/NT/etc. console version
-	gvim73.zip	Windows 95/98/NT/etc. GUI version
-	gvim73ole.zip	Windows 95/98/NT/etc. GUI version with OLE
-	gvim73_s.zip	Windows 3.1 GUI version
+	vim74w32.zip	Windows 95/98/NT/etc. console version
+	gvim74.zip	Windows 95/98/NT/etc. GUI version
+	gvim74ole.zip	Windows 95/98/NT/etc. GUI version with OLE
 
-You MUST also get the runtime archive (vim73rt.zip).
-The sources are also available (vim73src.zip).
+You MUST also get the runtime archive (vim74rt.zip).
+The sources are also available (vim74src.zip).

README_dos.txt

@@ -1,4 +1,4 @@
-README_dos.txt for version 7.3 of Vim: Vi IMproved.
+README_dos.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on MS-DOS and MS-Windows systems.
 See "README.txt" for general information about Vim.
@@ -47,13 +47,13 @@ These are the normal steps to install Vim from the .zip archives:
    Binary and runtime Vim archives are normally unpacked in the same location,
    on top of each other.
 
-2. Unpack the zip archives.  This will create a new directory "vim\vim73",
+2. Unpack the zip archives.  This will create a new directory "vim\vim74",
    in which all the distributed Vim files are placed.  Since the directory
    name includes the version number, it is unlikely that you overwrite
    existing files.
    Examples:
-	pkunzip -d gvim73.zip
-	unzip vim73w32.zip
+	pkunzip -d gvim74.zip
+	unzip vim74w32.zip
 
    You need to unpack the runtime archive and at least one of the binary
    archives.  When using more than one binary version, be careful not to
@@ -69,7 +69,7 @@ These are the normal steps to install Vim from the .zip archives:
    archive and follow the instructions in the documentation.
 
 3. Change to the new directory:
-	cd vim\vim73
+	cd vim\vim74
    Run the "install.exe" program.  It will ask you a number of questions about
    how you would like to have your Vim setup.  Among these are:
    - You can tell it to write a "_vimrc" file with your preferences in the
@@ -80,8 +80,8 @@ These are the normal steps to install Vim from the .zip archives:
      console or in a shell.  You can select one of the directories in your
      $PATH.  If you skip this, you can add Vim to the search path manually:
      The simplest is to add a line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim73
-	set path=%path%;D:\editors\vim\vim73
+	set path=%path%;C:\vim\vim74
+	set path=%path%;D:\editors\vim\vim74
    - Create entries for Vim on the desktop and in the Start menu.
 
 That's it!
@@ -93,8 +93,8 @@ Remarks:
   won't show a menubar.  Then you need to set the $VIM environment variable to
   point to the top directory of your Vim files.  Example:
     set VIM=C:\editors\vim
-  Vim version 7.3 will look for your vimrc file in $VIM, and for the runtime
-  files in $VIM/vim73.  See ":help $VIM" for more information.
+  Vim version 7.4 will look for your vimrc file in $VIM, and for the runtime
+  files in $VIM/vim74.  See ":help $VIM" for more information.
 
 - To avoid confusion between distributed files of different versions and your
   own modified vim scripts, it is recommended to use this directory layout:
@@ -105,14 +105,14 @@ Remarks:
 	C:\vim\vimfiles\ftplugin\*.vim	Filetype plugins
 	C:\vim\...			Other files you made.
   Distributed files:
-	C:\vim\vim73\vim.exe		The Vim version 7.3 executable.
-	C:\vim\vim73\doc\*.txt		The version 7.3 documentation files.
-	C:\vim\vim73\bugreport.vim	A Vim version 7.3 script.
-	C:\vim\vim73\...		Other version 7.3 distributed files.
+	C:\vim\vim74\vim.exe		The Vim version 7.4 executable.
+	C:\vim\vim74\doc\*.txt		The version 7.4 documentation files.
+	C:\vim\vim74\bugreport.vim	A Vim version 7.4 script.
+	C:\vim\vim74\...		Other version 7.4 distributed files.
   In this case the $VIM environment variable would be set like this:
 	set VIM=C:\vim
-  Then $VIMRUNTIME will automatically be set to "$VIM\vim73".  Don't add
-  "vim73" to $VIM, that won't work.
+  Then $VIMRUNTIME will automatically be set to "$VIM\vim74".  Don't add
+  "vim74" to $VIM, that won't work.
 
 - You can put your Vim executable anywhere else.  If the executable is not
   with the other Vim files, you should set $VIM. The simplest is to add a line
@@ -136,8 +136,8 @@ Remarks:
      Select Properties.
   5. In the Program tab, change the "Cmdline" to add "/c" and the name of the
      Vim executable.  Examples:
-	C:\command.com /c C:\vim\vim73\vim.exe
-	C:\command.com /c D:\editors\vim\vim73\vim.exe
+	C:\command.com /c C:\vim\vim74\vim.exe
+	C:\command.com /c D:\editors\vim\vim74\vim.exe
   6. Select the font, window size, etc. that you like.  If this isn't
      possible, select "Advanced" in the Program tab, and deselect "MS-DOS
      mode".

README_extra.txt

@@ -1,4 +1,4 @@
-README_extra.txt for version 7.3 of Vim: Vi IMproved.
+README_extra.txt for version 7.4 of Vim: Vi IMproved.
 
 These extra files of Vim are for special purposes.  This README explains what
 the files are for.  For general information about Vim, see the "README.txt"

README_mac.txt

@@ -1,4 +1,4 @@
-README_mac.txt for version 7.3 of Vim: Vi IMproved.
+README_mac.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Macintosh systems.
 See "README.txt" for general information about Vim.

README_ole.txt

@@ -1,4 +1,4 @@
-README_ole.txt for version 7.3 of Vim: Vi IMproved.
+README_ole.txt for version 7.4 of Vim: Vi IMproved.
 
 This archive contains gvim.exe with OLE interface and VisVim.
 This version of gvim.exe can also load a number of interface dynamically (you

README_os2.txt

@@ -1,32 +1,32 @@
-README_os2.txt for version 7.3 of Vim: Vi IMproved.
+README_os2.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on OS/2 systems.
 See "README.txt" for general information about Vim.
 
 
 NOTE: You will need two archives:
-  vim73rt.zip	contains the runtime files (same as for the PC version)
-  vim73os2.zip	contains the OS/2 executables
+  vim74rt.zip	contains the runtime files (same as for the PC version)
+  vim74os2.zip	contains the OS/2 executables
 
 1. Go to the directory where you want to put the Vim files.  Examples:
 	cd C:\
 	cd D:\editors
 
-2. Unpack the zip archives.  This will create a new directory "vim/vim73",
+2. Unpack the zip archives.  This will create a new directory "vim/vim74",
    in which all the distributed Vim files are placed.  Since the directory
    name includes the version number, it is unlikely that you overwrite
    existing files.
    Examples:
-	pkunzip -d vim73os2.zip
-	unzip vim73os2.zip
+	pkunzip -d vim74os2.zip
+	unzip vim74os2.zip
 
    After you unpacked the files, you can still move the whole directory tree
    to another location.
 
 3. Add the directory where vim.exe is to your path.  The simplest is to add a
    line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim73
-	set path=%path%;D:\editors\vim\vim73
+	set path=%path%;C:\vim\vim74
+	set path=%path%;D:\editors\vim\vim74
 
 That's it!
 
@@ -41,10 +41,10 @@ Extra remarks:
 	C:\vim\_viminfo			Dynamic info for 'viminfo'.
 	C:\vim\...			Other files you made.
   Distributed files:
-	C:\vim\vim73\vim.exe		The Vim version 7.3 executable.
-	C:\vim\vim73\doc\*.txt		The version 7.3 documentation files.
-	C:\vim\vim73\bugreport.vim	A Vim version 7.3 script.
-	C:\vim\vim73\...		Other version 7.3 distributed files.
+	C:\vim\vim74\vim.exe		The Vim version 7.4 executable.
+	C:\vim\vim74\doc\*.txt		The version 7.4 documentation files.
+	C:\vim\vim74\bugreport.vim	A Vim version 7.4 script.
+	C:\vim\vim74\...		Other version 7.4 distributed files.
   In this case the $VIM environment variable would be set like this:
 	set VIM=C:\vim
 

README_os390.txt

@@ -1,4 +1,4 @@
-README_zOS.txt for version 7.3 of Vim: Vi IMproved.
+README_zOS.txt for version 7.4 of Vim: Vi IMproved.
 
 This readme explains how to build Vim on z/OS.  Formerly called OS/390.
 See "README.txt" for general information about Vim.
@@ -29,7 +29,7 @@ console version).
 Compiling:
 ==========
 
-Vim can be compiled with or without GUI support. For 7.3 only the compilation
+Vim can be compiled with or without GUI support. For 7.4 only the compilation
 without GUI was tested. Below is a section about compiling with X11 but this
 is from an earlier version of Vim.
 
@@ -78,7 +78,7 @@ Change to the vim directory and do:
 With X11:
 ---------
 
-WARNING: This instruction was not tested with Vim 7.3.
+WARNING: This instruction was not tested with Vim 7.4.
 
 There are two ways for building VIM with X11 support. The first way is simple
 and results in a big executable (~13 Mb), the second needs a few additional

README_src.txt

@@ -1,10 +1,8 @@
-README_src.txt for version 7.3 of Vim: Vi IMproved.
+README_src.txt for version 7.4 of Vim: Vi IMproved.
 
 The source archive contains the files needed to compile Vim on Unix systems.
-It is packed for Unix systems (NL line separator).  It is also used for other
-systems in combination with the extra archive (vim-7.3-extra.tar.gz, in the
-"extra" directory of ftp.vim.org).
+It is packed for Unix systems (NL line separator).
 
 For more information, see the README.txt file that comes with the runtime
-archive (vim-7.3-rt.tar.gz).  To be able to run Vim you MUST get the runtime
+archive (vim-7.4-rt.tar.gz).  To be able to run Vim you MUST get the runtime
 archive too!

README_srcdos.txt

@@ -1,8 +1,8 @@
-README_srcdos.txt for version 7.3 of Vim: Vi IMproved.
+README_srcdos.txt for version 7.4 of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim73rt.zip).
+These files are in the runtime archive (vim74rt.zip).
 
 
 The DOS source archive contains the files needed to compile Vim on MS-DOS or

README_unix.txt

@@ -1,4 +1,4 @@
-README_unix.txt for version 7.3 of Vim: Vi IMproved.
+README_unix.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Unix systems.
 See "README.txt" for general information about Vim.

README_vms.txt

@@ -1,4 +1,4 @@
-README_vms.txt for version 7.3 of Vim: Vi IMproved.
+README_vms.txt for version 7.4 of Vim: Vi IMproved.
 
 This file explains the installation of Vim on VMS systems.
 See "README.txt" in the runtime archive for information about Vim.

README_w32s.txt

@@ -1,4 +1,4 @@
-README_w32s.txt for version 7.3 of Vim: Vi IMproved.
+README_w32s.txt for version 7.4 of Vim: Vi IMproved.
 
 This archive contains the gvim.exe that was specifically compiled for use in
 the Win32s subsystem in MS-Windows 3.1 and 3.11.

nsis/gvim.nsi

@@ -5,7 +5,7 @@
 # WARNING: if you make changes to this script, look out for $0 to be valid,
 # because uninstall deletes most files in $0.
 
-# Location of gvim_ole.exe, vimd32.exe, GvimExt/*, etc.
+# Location of gvim_ole.exe, vimw32.exe, GvimExt/*, etc.
 !define VIMSRC "..\src"
 
 # Location of runtime files
@@ -22,7 +22,7 @@
 !define HAVE_NLS
 
 !define VER_MAJOR 7
-!define VER_MINOR 3
+!define VER_MINOR 4
 
 # ----------- No configurable settings below this line -----------
 
@@ -40,7 +40,7 @@ RequestExecutionLevel highest
 ComponentText "This will install Vim ${VER_MAJOR}.${VER_MINOR} on your computer."
 DirText "Choose a directory to install Vim (must end in 'vim')"
 Icon icons\vim_16c.ico
-# NSIS2 uses a different strategy with six diferent images in a strip...
+# NSIS2 uses a different strategy with six different images in a strip...
 #EnabledBitmap icons\enabled.bmp
 #DisabledBitmap icons\disabled.bmp
 UninstallText "This will uninstall Vim ${VER_MAJOR}.${VER_MINOR} from your system."
@@ -56,6 +56,9 @@ LicenseData ${VIMRT}\doc\uganda.nsis.txt
   !packhdr temp.dat "upx --best --compress-icons=1 temp.dat"
 !endif
 
+SetCompressor /SOLID lzma
+XPStyle on
+
 # This adds '\vim' to the user choice automagically.  The actual value is
 # obtained below with ReadINIStr.
 InstallDir "$PROGRAMFILES\Vim"
@@ -247,11 +250,10 @@ Section "Vim console program (vim.exe)"
 	ReadRegStr $R0 HKLM \
 	   "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion
 	IfErrors 0 lbl_winnt
-	    # Windows 95/98/ME
-	    File /oname=vim.exe ${VIMSRC}\vimd32.exe
+	    # Windows 95/98/ME: not supported
 	    Goto lbl_done
 	lbl_winnt:
-	    # Windows NT/2000/XT
+	    # Windows NT/2000/XP and later
 	    File /oname=vim.exe ${VIMSRC}\vimw32.exe
 	lbl_done:
 	StrCpy $2 "$2 vim view vimdiff"

runtime/autoload/getscript.vim

@@ -1,8 +1,8 @@
 " ---------------------------------------------------------------------
 " getscript.vim
 "  Author:	Charles E. Campbell
-"  Date:	Apr 17, 2013
-"  Version:	35
+"  Date:	Jan 21, 2014
+"  Version:	36
 "  Installing:	:help glvs-install
 "  Usage:	:help glvs
 "
@@ -15,7 +15,7 @@
 if exists("g:loaded_getscript")
  finish
 endif
-let g:loaded_getscript= "v35"
+let g:loaded_getscript= "v36"
 if &cp
  echoerr "GetLatestVimScripts is not vi-compatible; not loaded (you need to set nocp)"
  finish
@@ -208,8 +208,8 @@ fun! getscript#GetLatestVimScripts()
   let lastline    = line("$")
 "  call Decho("lastline#".lastline)
   let firstdir    = substitute(&rtp,',.*$','','')
-  let plugins     = split(globpath(firstdir,"plugin/*.vim"),'\n')
-  let plugins     = plugins + split(globpath(firstdir,"AsNeeded/*.vim"),'\n')
+  let plugins     = split(globpath(firstdir,"plugin/**/*.vim"),'\n')
+  let plugins     = plugins + split(globpath(firstdir,"AsNeeded/**/*.vim"),'\n')
   let foundscript = 0
 
   " this loop updates the GetLatestVimScripts.dat file

runtime/autoload/netrwSettings.vim

@@ -1,7 +1,7 @@
 " netrwSettings.vim: makes netrw settings simpler
-" Date:		May 03, 2013
+" Date:		Aug 27, 2013
 " Maintainer:	Charles E Campbell <drchipNOSPAM at campbellfamily dot biz>
-" Version:	14a	ASTRO-ONLY
+" Version:	14
 " Copyright:    Copyright (C) 1999-2007 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
 "               with or without modifications, provided that this copyright
@@ -19,7 +19,7 @@
 if exists("g:loaded_netrwSettings") || &cp
   finish
 endif
-let g:loaded_netrwSettings = "v14a"
+let g:loaded_netrwSettings = "v14"
 if v:version < 700
  echohl WarningMsg
  echo "***warning*** this version of netrwSettings needs vim 7.0"
@@ -98,6 +98,11 @@ fun! netrwSettings#NetrwSettings()
 
   put = ''
   put ='+ Netrw Browser Control'
+  if exists("g:netrw_altfile")
+   put = 'let g:netrw_altfile   = '.g:netrw_altfile
+  else
+   put = 'let g:netrw_altfile   = 0'
+  endif
   put = 'let g:netrw_alto              = '.g:netrw_alto
   put = 'let g:netrw_altv              = '.g:netrw_altv
   put = 'let g:netrw_banner            = '.g:netrw_banner

runtime/autoload/netrw_gitignore.vim

@@ -0,0 +1,71 @@
+" netrw_gitignore#Hide: gitignore-based hiding
+"  Function returns a string of comma separated patterns convenient for
+"  assignment to `g:netrw_list_hide` option.
+"  Function can take additional filenames as arguments, example:
+"  netrw_gitignore#Hide('custom_gitignore1', 'custom_gitignore2')
+"
+" Usage examples:
+"  let g:netrw_list_hide = netrw_gitignore#Hide()
+"  let g:netrw_list_hide = netrw_gitignore#Hide() . 'more,hide,patterns'
+"
+" Copyright:    Copyright (C) 2013 Bruno Sutic {{{1
+"               Permission is hereby granted to use and distribute this code,
+"               with or without modifications, provided that this copyright
+"               notice is copied with it. Like anything else that's free,
+"               netrw_gitignore.vim is provided *as is* and comes with no
+"               warranty of any kind, either expressed or implied. By using
+"               this plugin, you agree that in no event will the copyright
+"               holder be liable for any damages resulting from the use
+"               of this software.
+function! netrw_gitignore#Hide(...)
+  let additional_files = a:000
+
+  let default_files = ['.gitignore', '.git/info/exclude']
+
+  " get existing global/system gitignore files
+  let global_gitignore = expand(substitute(system("git config --global core.excludesfile"), '\n', '', 'g'))
+  if global_gitignore !=# ''
+    let default_files = add(default_files, global_gitignore)
+  endif
+  let system_gitignore = expand(substitute(system("git config --system core.excludesfile"), '\n', '', 'g'))
+  if system_gitignore !=# ''
+    let default_files = add(default_files, system_gitignore)
+  endif
+
+  " append additional files if given as function arguments
+  if additional_files !=# []
+    let files = extend(default_files, additional_files)
+  else
+    let files = default_files
+  endif
+
+  " keep only existing/readable files
+  let gitignore_files = []
+  for file in files
+    if filereadable(file)
+      let gitignore_files = add(gitignore_files, file)
+    endif
+  endfor
+
+  " get contents of gitignore patterns from those files
+  let gitignore_lines = []
+  for file in gitignore_files
+    for line in readfile(file)
+      " filter empty lines and comments
+      if line !~# '^#' && line !~# '^$'
+        let gitignore_lines = add(gitignore_lines, line)
+      endif
+    endfor
+  endfor
+
+  " convert gitignore patterns to Netrw/Vim regex patterns
+  let escaped_lines = []
+  for line in gitignore_lines
+    let escaped       = line
+    let escaped       = substitute(escaped, '\.', '\\.', 'g')
+    let escaped       = substitute(escaped, '*', '.*', 'g')
+    let escaped_lines = add(escaped_lines, escaped)
+  endfor
+
+  return join(escaped_lines, ',')
+endfunction

runtime/autoload/rubycomplete.vim

@@ -1,9 +1,7 @@
 " Vim completion script
 " Language:             Ruby
 " Maintainer:           Mark Guzman <segfault@hasno.info>
-" Last Change:          2009 Sep 28
-" URL:                  http://vim-ruby.rubyforge.org
-" Anon CVS:             See above site
+" URL:                  https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:  Doug Kearns <dougkearns@gmail.com>
 " Maintainer Version:   0.8.1
 " ----------------------------------------------------------------------------
@@ -12,16 +10,23 @@
 " ----------------------------------------------------------------------------
 
 " {{{ requirement checks
+
+function! s:ErrMsg(msg)
+    echohl ErrorMsg
+    echo a:msg
+    echohl None
+endfunction
+
 if !has('ruby')
-    s:ErrMsg( "Error: Rubycomplete requires vim compiled with +ruby" )
-    s:ErrMsg( "Error: falling back to syntax completion" )
+    call s:ErrMsg( "Error: Rubycomplete requires vim compiled with +ruby" )
+    call s:ErrMsg( "Error: falling back to syntax completion" )
     " lets fall back to syntax completion
     setlocal omnifunc=syntaxcomplete#Complete
     finish
 endif
 
 if version < 700
-    s:ErrMsg( "Error: Required vim >= 7.0" )
+    call s:ErrMsg( "Error: Required vim >= 7.0" )
     finish
 endif
 " }}} requirement checks
@@ -51,12 +56,6 @@ endif
 " {{{ vim-side support functions
 let s:rubycomplete_debug = 0
 
-function! s:ErrMsg(msg)
-    echohl ErrorMsg
-    echo a:msg
-    echohl None
-endfunction
-
 function! s:dprint(msg)
     if s:rubycomplete_debug == 1
         echom a:msg
@@ -133,7 +132,7 @@ function! s:GetRubyVarType(v)
     let stopline = 1
     let vtp = ''
     let pos = getpos('.')
-    let sstr = '^\s*#\s*@var\s*'.a:v.'\>\s\+[^ \t]\+\s*$'
+    let sstr = '^\s*#\s*@var\s*'.escape(a:v, '*').'\>\s\+[^ \t]\+\s*$'
     let [lnum,lcol] = searchpos(sstr,'nb',stopline)
     if lnum != 0 && lcol != 0
         call setpos('.',pos)
@@ -275,7 +274,7 @@ class VimRubyCompletion
     pare = /^\s*class\s*(.*)\s*<\s*(.*)\s*\n/.match( classdef )
     load_buffer_class( $2 ) if pare != nil  && $2 != name # load parent class if needed
 
-    mixre = /.*\n\s*include\s*(.*)\s*\n/.match( classdef )
+    mixre = /.*\n\s*(include|prepend)\s*(.*)\s*\n/.match( classdef )
     load_buffer_module( $2 ) if mixre != nil && $2 != name # load mixins if needed
 
     begin
@@ -364,6 +363,10 @@ class VimRubyCompletion
     print txt if @@debug
   end
 
+  def escape_vim_singlequote_string(str)
+    str.to_s.gsub(/'/,"\\'")
+  end
+
   def get_buffer_entity_list( type )
     # this will be a little expensive.
     loading_allowed = VIM::evaluate("exists('g:rubycomplete_buffer_loading') && g:rubycomplete_buffer_loading")
@@ -526,9 +529,9 @@ class VimRubyCompletion
   end
 
   def clean_sel(sel, msg)
-    sel.delete_if { |x| x == nil }
-    sel.uniq!
-    sel.grep(/^#{Regexp.quote(msg)}/) if msg != nil
+    ret = sel.reject{|x|x.nil?}.uniq
+    ret = ret.grep(/^#{Regexp.quote(msg)}/) if msg != nil
+    ret
   end
 
   def get_rails_view_methods
@@ -767,10 +770,10 @@ class VimRubyCompletion
     constants = clean_sel( constants, message )
 
     valid = []
-    valid += methods.collect { |m| { :name => m, :type => 'm' } }
-    valid += variables.collect { |v| { :name => v, :type => 'v' } }
-    valid += classes.collect { |c| { :name => c, :type => 't' } }
-    valid += constants.collect { |d| { :name => d, :type => 'd' } }
+    valid += methods.collect { |m| { :name => m.to_s, :type => 'm' } }
+    valid += variables.collect { |v| { :name => v.to_s, :type => 'v' } }
+    valid += classes.collect { |c| { :name => c.to_s, :type => 't' } }
+    valid += constants.collect { |d| { :name => d.to_s, :type => 'd' } }
     valid.sort! { |x,y| x[:name] <=> y[:name] }
 
     outp = ""
@@ -779,7 +782,7 @@ class VimRubyCompletion
     rg.step(150) do |x|
       stpos = 0+x
       enpos = 150+x
-      valid[stpos..enpos].each { |c| outp += "{'word':'%s','item':'%s','kind':'%s'}," % [ c[:name], c[:name], c[:type] ] }
+      valid[stpos..enpos].each { |c| outp += "{'word':'%s','item':'%s','kind':'%s'}," % [ c[:name], c[:name], c[:type] ].map{|x|escape_vim_singlequote_string(x)} }
       outp.sub!(/,$/, '')
 
       VIM::command("call extend(g:rubycomplete_completions, [%s])" % outp)

runtime/autoload/tohtml.vim

@@ -1,6 +1,6 @@
 " Vim autoload file for the tohtml plugin.
 " Maintainer: Ben Fritz <fritzophrenic@gmail.com>
-" Last Change: 2013 May 31
+" Last Change: 2013 Jun 19
 "
 " Additional contributors:
 "
@@ -401,15 +401,15 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
   call add(html, '</head>')
   let body_line_num = len(html)
   if !empty(s:settings.prevent_copy)
-    call add(html, "<body onload='FixCharWidth(); JumpToLine();'>")
+    call add(html, "<body onload='FixCharWidth();".(s:settings.line_ids ? " JumpToLine();" : "")."'>")
     call add(html, "<!-- hidden divs used by javascript to get the width of a char -->")
     call add(html, "<div id='oneCharWidth'>0</div>")
     call add(html, "<div id='oneInputWidth'><input size='1' value='0'".tag_close."</div>")
     call add(html, "<div id='oneEmWidth' style='width: 1em;'></div>")
   else
-    call add(html, '<body onload="JumpToLine();">')
+    call add(html, '<body'.(s:settings.line_ids ? ' onload="JumpToLine();"' : '').'>')
   endif
-  call add(html, "<table border='1' width='100%' id='vimCodeElement'>")
+  call add(html, "<table border='1' width='100%' id='vimCodeElement".s:settings.id_suffix."'>")
 
   call add(html, '<tr>')
   for buf in a:win_list
@@ -475,7 +475,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     let temp = getline(1,'$')
     " clean out id on the main content container because we already set it on
     " the table
-    let temp[0] = substitute(temp[0], " id='vimCodeElement'", "", "")
+    let temp[0] = substitute(temp[0], " id='vimCodeElement[^']*'", "", "")
     " undo deletion of start and end part
     " so we can later save the file as valid html
     " TODO: restore using grabbed lines if undolevel is 1?
@@ -568,9 +568,9 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ '  var emWidth = document.getElementById("oneEmWidth").clientWidth;',
 	    \ '  if (inputWidth > goodWidth) {',
 	    \ '    while (ratio < 100*goodWidth/emWidth && ratio < 100) {',
-	    \ '    ratio += 5;',
-	    \ '  }',
-	    \ '  document.getElementById("vimCodeElement").className = "em"+ratio;',
+	    \ '      ratio += 5;',
+	    \ '    }',
+	    \ '    document.getElementById("vimCodeElement'.s:settings.id_suffix.'").className = "em"+ratio;',
 	    \ '  }',
 	    \ '}'
 	    \ ])
@@ -596,7 +596,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ "",
 	    \ "  /* navigate upwards in the DOM tree to open all folds containing the line */",
 	    \ "  var node = lineElem;",
-	    \ "  while (node && node.id != 'vimCodeElement')",
+	    \ "  while (node && node.id != 'vimCodeElement".s:settings.id_suffix."')",
 	    \ "  {",
 	    \ "    if (node.className == 'closed-fold')",
 	    \ "    {",
@@ -722,6 +722,7 @@ func! tohtml#GetUserSettings() "{{{
     call tohtml#GetOption(user_settings,     'no_invalid', 0 )
     call tohtml#GetOption(user_settings,   'whole_filler', 0 )
     call tohtml#GetOption(user_settings,      'use_xhtml', 0 )
+    call tohtml#GetOption(user_settings,       'line_ids', user_settings.number_lines )
     " }}}
     
     " override those settings that need it {{{
@@ -855,6 +856,20 @@ func! tohtml#GetUserSettings() "{{{
       let user_settings.no_invalid = 0
     endif
 
+    if exists('g:html_id_expr')
+      let user_settings.id_suffix = eval(g:html_id_expr)
+      if user_settings.id_suffix !~ '^[-_:.A-Za-z0-9]*$'
+	echohl WarningMsg
+	echomsg '2html: g:html_id_expr evaluated to invalid string for HTML id attributes'
+	echomsg '2html: Omitting user-specified suffix'
+	echohl None
+	sleep 3
+	let user_settings.id_suffix=""
+      endif
+    else
+      let user_settings.id_suffix=""
+    endif
+
     " TODO: font
 
     return user_settings

runtime/autoload/xmlcomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	XML
 " Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2006 Aug 15
+" Last Change:	2013 Jun 29
 " Version: 1.9
 "
 " Changelog:
@@ -475,12 +475,12 @@ function! s:InCommentAt(line, col)
 endfunction
 
 function! s:SetKeywords()
-	let g:IsKeywordBak=&iskeyword
-	let &iskeyword='33-255'
+	let s:IsKeywordBak=&l:iskeyword
+	let &l:iskeyword='33-255'
 endfunction
 
 function! s:RestoreKeywords()
-	let &iskeyword=g:IsKeywordBak
+	let &l:iskeyword=s:IsKeywordBak
 endfunction
 
 function! s:Push(el, sname)

runtime/autoload/zip.vim

@@ -1,10 +1,10 @@
 " zip.vim: Handles browsing zipfiles
 "            AUTOLOAD PORTION
-" Date:		Apr 17, 2013
-" Version:	26
+" Date:		Jul 02, 2013
+" Version:	27
 " Maintainer:	Charles E Campbell <NdrOchip@ScampbellPfamily.AbizM-NOSPAM>
 " License:	Vim License  (see vim's :help license)
-" Copyright:    Copyright (C) 2005-2012 Charles E. Campbell {{{1
+" Copyright:    Copyright (C) 2005-2013 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
 "               with or without modifications, provided that this copyright
 "               notice is copied with it. Like anything else that's free,
@@ -13,13 +13,14 @@
 "               this plugin, you agree that in no event will the copyright
 "               holder be liable for any damages resulting from the use
 "               of this software.
+"redraw!|call DechoSep()|call inputsave()|call input("Press <cr> to continue")|call inputrestore()
 
 " ---------------------------------------------------------------------
 " Load Once: {{{1
 if &cp || exists("g:loaded_zip")
  finish
 endif
-let g:loaded_zip= "v26"
+let g:loaded_zip= "v27"
 if v:version < 702
  echohl WarningMsg
  echo "***warning*** this version of zip needs vim 7.2"
@@ -28,6 +29,7 @@ if v:version < 702
 endif
 let s:keepcpo= &cpo
 set cpo&vim
+"DechoTabOn
 
 let s:zipfile_escape = ' ?&;\'
 let s:ERROR          = 2
@@ -60,6 +62,16 @@ endif
 " zip#Browse: {{{2
 fun! zip#Browse(zipfile)
 "  call Dfunc("zip#Browse(zipfile<".a:zipfile.">)")
+  " sanity check: insure that the zipfile has "PK" as its first two letters
+  "               (zipped files have a leading PK as a "magic cookie")
+  if !filereadable(a:zipfile) || readfile(a:zipfile, "", 1)[0] !~ '^PK'
+   exe "noautocmd e ".fnameescape(a:zipfile)
+"   call Dret("zip#Browse : not a zipfile<".a:zipfile.">")
+   return
+"  else        " Decho
+"   call Decho("zip#Browse: a:zipfile<".a:zipfile."> passed PK test - its a zip file")
+  endif
+
   let repkeep= &report
   set report=10
 
@@ -197,6 +209,7 @@ fun! zip#Read(fname,mode)
   "   exe "keepj sil! r! ".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1)
   " but allows zipfile:... entries in quickfix lists
   let temp = tempname()
+"  call Decho("using temp file<".temp.">")
   let fn   = expand('%:p')
   exe "sil! !".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1).' > '.temp
 "  call Decho("exe sil! !".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1).' > '.temp)
@@ -208,7 +221,7 @@ fun! zip#Read(fname,mode)
   filetype detect
 
   " cleanup
-  keepj 0d
+  "  keepj 0d   " used to be needed for the ...r! ... method
   set nomod
 
   let &report= repkeep

runtime/colors/README.txt

@@ -36,6 +36,14 @@ Some attributes (e.g., bold) might be set in the defaults that you want
 removed in your color scheme.  Use something like "gui=NONE" to remove the
 attributes.
 
+In case you want to set 'background' depending on the colorscheme selected,
+this autocmd might be useful:
+     autocmd SourcePre */colors/blue_sky.vim set background=dark
+Replace "blue_sky" with the name of the colorscheme.
+
+In case you want to tweak a colorscheme after it was loaded, check out that
+ColorScheme autocmd event.
+
 To see which highlight group is used where, find the help for
 "highlight-groups" and "group-name".
 

runtime/colors/delek.vim

@@ -1,10 +1,10 @@
 " Vim color file
-" Maintainer:	David Schweikert <dws@ee.ethz.ch>
-" Last Change:	2006 Apr 30
+" Maintainer:	David Schweikert <david@schweikert.ch>
+" Last Change:	2014 Mar 19
 
 hi clear
 
-let colors_name = "delek"
+let g:colors_name = "delek"
 
 " Normal should come first
 hi Normal     guifg=Black  guibg=White
@@ -28,7 +28,11 @@ hi NonText    ctermfg=Blue	   gui=bold guifg=gray guibg=white
 hi Pmenu      guibg=LightBlue
 hi PmenuSel   ctermfg=White	   ctermbg=DarkBlue  guifg=White  guibg=DarkBlue
 hi Question   ctermfg=DarkGreen    gui=bold guifg=SeaGreen
-hi Search     ctermfg=NONE	   ctermbg=Yellow guibg=Yellow guifg=NONE
+if &background == "light"
+    hi Search     ctermfg=NONE	   ctermbg=Yellow guibg=Yellow guifg=NONE
+else
+    hi Search     ctermfg=Black	   ctermbg=Yellow guibg=Yellow guifg=Black
+endif
 hi SpecialKey ctermfg=DarkBlue	   guifg=Blue
 hi StatusLine cterm=bold	   ctermbg=blue ctermfg=yellow guibg=gold guifg=blue
 hi StatusLineNC	cterm=bold	   ctermbg=blue ctermfg=black  guibg=gold guifg=blue

runtime/colors/industry.vim

@@ -0,0 +1,40 @@
+" Vim color file
+" Maintainer:	Shian Lee 
+" Last Change:	2014 Mar 6 (for vim 7.4)
+" Remark:	"industry" stands for 'industrial' color scheme. In industrial
+"		HMI (Human-Machine-Interface) programming, using a standard color
+"               scheme is mandatory in many cases (in traffic-lights for example): 
+"               LIGHT_RED is	    'Warning' 
+"               LIGHT_YELLOW is	    'Attention' 
+"               LIGHT_GREEN is	    'Normal' 
+"               LIGHT_MAGENTA is    'Warning-Attention' (light RED-YELLOW)
+"               LIGHT_CYAN is	    'Attention-Normal'  (light YELLOW-GREEN).
+"               BLACK is	    Dark-High-Contrast Background for maximum safety.
+"               BLUE is		    Shade of BLACK (not supposed to get attention).
+"
+"               Industrial color scheme is by nature clear, safe and productive. 
+"               Yet, depends on the file type's syntax, it might appear incorrect. 
+
+" Reset to dark background, then reset everything to defaults:
+set background=dark
+highlight clear
+if exists("syntax_on")
+    syntax reset
+endif
+
+let colors_name = "industry"
+
+" First set Normal to regular white on black text colors:
+hi Normal ctermfg=LightGray ctermbg=Black guifg=#dddddd	guibg=Black
+
+" Syntax highlighting (other color-groups using default, see :help group-name):
+hi Comment    cterm=NONE ctermfg=DarkCyan    	gui=NONE guifg=#00aaaa   	 
+hi Constant   cterm=NONE ctermfg=LightCyan   	gui=NONE guifg=#00ffff   	
+hi Identifier cterm=NONE ctermfg=LightMagenta   gui=NONE guifg=#ff00ff   
+hi Function   cterm=NONE ctermfg=LightGreen   	gui=NONE guifg=#00ff00   	
+hi Statement  cterm=NONE ctermfg=White	     	gui=bold guifg=#ffffff	     	
+hi PreProc    cterm=NONE ctermfg=Yellow		gui=NONE guifg=#ffff00 	
+hi Type	      cterm=NONE ctermfg=LightGreen	gui=bold guifg=#00ff00 		
+hi Special    cterm=NONE ctermfg=LightRed    	gui=NONE guifg=#ff0000    	
+hi Delimiter  cterm=NONE ctermfg=Yellow    	gui=NONE guifg=#ffff00    	
+

runtime/compiler/checkstyle.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
 " Compiler:	Checkstyle
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/checkstyle.vim
-" Last Change:	2004 Nov 27
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jun 26
 
 if exists("current_compiler")
   finish
@@ -17,4 +16,4 @@ CompilerSet makeprg=java\ com.puppycrawl.tools.checkstyle.Main\ -f\ plain
 
 " sample error: WebTable.java:282: '+=' is not preceeded with whitespace.
 "		WebTable.java:201:1: '{' should be on the previous line.
-CompilerSet errorformat=%f:%l:\ %m,%f:%l:%v:\ %m,%-G%.%#
+CompilerSet errorformat=%f:%l:%v:\ %m,%f:%l:\ %m,%-G%.%#

runtime/compiler/eruby.vim

@@ -1,9 +1,7 @@
 " Vim compiler file
 " Language:		eRuby
 " Maintainer:		Doug Kearns <dougkearns@gmail.com>
-" Last Change:		2008 Aug 1
-" URL:			http://vim-ruby.rubyforge.org
-" Anon CVS:		See above site
+" URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
 
 if exists("current_compiler")

runtime/compiler/gcc.vim

@@ -25,10 +25,10 @@ CompilerSet errorformat=
       \%f:%l:\ %tarning:\ %m,
       \%f:%l:\ %m,
       \\"%f\"\\,\ line\ %l%*\\D%c%*[^\ ]\ %m,
-      \%D%*\\a[%*\\d]:\ Entering\ directory\ `%f',
-      \%X%*\\a[%*\\d]:\ Leaving\ directory\ `%f',
-      \%D%*\\a:\ Entering\ directory\ `%f',
-      \%X%*\\a:\ Leaving\ directory\ `%f',
+      \%D%*\\a[%*\\d]:\ Entering\ directory\ [`']%f',
+      \%X%*\\a[%*\\d]:\ Leaving\ directory\ [`']%f',
+      \%D%*\\a:\ Entering\ directory\ [`']%f',
+      \%X%*\\a:\ Leaving\ directory\ [`']%f',
       \%DMaking\ %*\\a\ in\ %f
 
 if exists('g:compiler_gcc_ignore_unmatched_lines')

runtime/compiler/javac.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
-" Compiler:     javac
-" Maintainer:   Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/javac.vim
-" Last Change:  2004 Nov 27
+" Compiler:	javac
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2004 Nov 27
 
 if exists("current_compiler")
   finish

runtime/compiler/ocaml.vim

@@ -0,0 +1,44 @@
+" Vim Compiler File
+" Compiler:	ocaml
+" Maintainer:	See ftplugin/ocaml.vim (?)
+" Last Change:	June 2013 by Marc Weber
+"
+" Marc Weber's comments:
+" Setting makeprg doesn't make sense, because there is ocamlc, ocamlopt,
+" ocamake and whatnot. So which one to use?
+"
+" This error format was moved from ftplugin/ocaml.vim to this file,
+" because ftplugin is the wrong file to set an error format
+" and the error format itself is annoying because it joins many lines in this
+" error case:
+"
+"    Error: The implementation foo.ml does not match the interface foo.cmi:
+"    Modules do not match case.
+"
+" So having it here makes people opt-in
+
+
+if exists("current_compiler")
+    finish
+endif
+let current_compiler = "ocaml"
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet errorformat =
+      \%EFile\ \"%f\"\\,\ line\ %l\\,\ characters\ %c-%*\\d:,
+      \%EFile\ \"%f\"\\,\ line\ %l\\,\ character\ %c:%m,
+      \%+EReference\ to\ unbound\ regexp\ name\ %m,
+      \%Eocamlyacc:\ e\ -\ line\ %l\ of\ \"%f\"\\,\ %m,
+      \%Wocamlyacc:\ w\ -\ %m,
+      \%-Zmake%.%#,
+      \%C%m,
+      \%D%*\\a[%*\\d]:\ Entering\ directory\ `%f',
+      \%X%*\\a[%*\\d]:\ Leaving\ directory\ `%f',
+      \%D%*\\a:\ Entering\ directory\ `%f',
+      \%X%*\\a:\ Leaving\ directory\ `%f',
+      \%DMaking\ %*\\a\ in\ %f
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/php.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
-" Compiler:	PHP
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/php.vim
-" Last Change:	2004 Nov 27
+" Compiler:	PHP CLI
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jun 25
 
 if exists("current_compiler")
   finish
@@ -17,12 +16,11 @@ let s:cpo_save = &cpo
 set cpo-=C
 
 CompilerSet makeprg=php\ -lq
-
-CompilerSet errorformat=%E<b>Parse\ error</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
-		       \%W<b>Notice</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
-		       \%EParse\ error:\ %m\ in\ %f\ on\ line\ %l,
-		       \%WNotice:\ %m\ in\ %f</b>\ on\ line\ %l,
-		       \%-G%.%#
+CompilerSet errorformat=%E<b>%.%#Parse\ error</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
+		    \%W<b>%.%#Notice</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
+		    \%E%.%#Parse\ error:\ %m\ in\ %f\ on\ line\ %l,
+		    \%W%.%#Notice:\ %m\ in\ %f\ on\ line\ %l,
+		    \%-G%.%#
 
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/compiler/rake.vim

@@ -0,0 +1,35 @@
+" Vim compiler file
+" Language:		Rake
+" Maintainer:		Tim Pope <vimNOSPAM@tpope.org>
+" URL:			https://github.com/vim-ruby/vim-ruby
+" Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "rake"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo-=C
+
+CompilerSet makeprg=rake
+
+CompilerSet errorformat=
+      \%D(in\ %f),
+      \%\\s%#from\ %f:%l:%m,
+      \%\\s%#from\ %f:%l:,
+      \%\\s%##\ %f:%l:%m,
+      \%\\s%##\ %f:%l,
+      \%\\s%#[%f:%l:\ %#%m,
+      \%\\s%#%f:%l:\ %#%m,
+      \%\\s%#%f:%l:,
+      \%m\ [%f:%l]:
+
+let &cpo = s:cpo_save
+unlet s:cpo_save
+
+" vim: nowrap sw=2 sts=2 ts=8:

runtime/compiler/rspec.vim

@@ -1,9 +1,7 @@
 " Vim compiler file
 " Language:		RSpec
 " Maintainer:		Tim Pope <vimNOSPAM@tpope.org>
-" Last Change:		2009 Dec 22
-" URL:			http://vim-ruby.rubyforge.org
-" Anon CVS:		See above site
+" URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
 
 if exists("current_compiler")
@@ -18,21 +16,15 @@ endif
 let s:cpo_save = &cpo
 set cpo-=C
 
-CompilerSet makeprg=spec
+CompilerSet makeprg=rspec
 
 CompilerSet errorformat=
-    \%+W'%.%#'\ FAILED,
-    \%+I'%.%#'\ FIXED,
-    \%-Cexpected:%.%#,
-    \%-C\ \ \ \ \ got:%.%#,
+    \%f:%l:\ %tarning:\ %m,
     \%E%.%#:in\ `load':\ %f:%l:%m,
-    \%C%f:%l:,
-    \%W%f:%l:\ warning:\ %m,
-    \%E%f:%l:in\ %*[^:]:\ %m,
-    \%E%f:%l:\ %m,
-    \%-Z%\tfrom\ %f:%l,
-    \%-Z%p^%.%#,
-    \%-C%.%#,
+    \%E%f:%l:in\ `%*[^']':\ %m,
+    \%-Z\ \ \ \ \ \#\ %f:%l:%.%#,
+    \%E\ \ %\\d%\\+)%.%#,
+    \%C\ \ \ \ \ %m,
     \%-G%.%#
 
 let &cpo = s:cpo_save

runtime/compiler/ruby.vim

@@ -1,33 +1,10 @@
 " Vim compiler file
 " Language:		Ruby
 " Function:		Syntax check and/or error reporting
-" Maintainer:		Tim Hammerquist <timh at rubyforge.org>
-" Last Change:		2008 Aug 1
-" URL:			http://vim-ruby.rubyforge.org
-" Anon CVS:		See above site
+" Maintainer:		Tim Pope <vimNOSPAM@tpope.org>
+" URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
 " ----------------------------------------------------------------------------
-"
-" Changelog:
-" 0.2:	script saves and restores 'cpoptions' value to prevent problems with
-"	line continuations
-" 0.1:	initial release
-"
-" Contributors:
-"   Hugh Sasse <hgs@dmu.ac.uk>
-"   Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-"
-" Todo:
-"   match error type %m
-"
-" Comments:
-"   I know this file isn't perfect.  If you have any questions, suggestions,
-"   patches, etc., please don't hesitate to let me know.
-"
-"   This is my first experience with 'errorformat' and compiler plugins and
-"   I welcome any input from more experienced (or clearer-thinking)
-"   individuals.
-" ----------------------------------------------------------------------------
 
 if exists("current_compiler")
   finish

runtime/compiler/rubyunit.vim

@@ -1,9 +1,7 @@
 " Vim compiler file
 " Language:		Test::Unit - Ruby Unit Testing Framework
 " Maintainer:		Doug Kearns <dougkearns@gmail.com>
-" Last Change:		2008 Aug 1
-" URL:			http://vim-ruby.rubyforge.org
-" Anon CVS:		See above site
+" URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
 
 if exists("current_compiler")

runtime/compiler/se.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
-" Compiler:	se (SmartEiffel Compiler)
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/se.vim
-" Last Change:	2004 Nov 27
+" Compiler:	se (Liberty Eiffel Compiler)
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jun 29
 
 if exists("current_compiler")
   finish
@@ -16,12 +15,15 @@ endif
 let s:cpo_save = &cpo
 set cpo-=C
 
-CompilerSet makeprg=compile\ %
+CompilerSet makeprg=se\ c
 
 CompilerSet errorformat=%W******\ Warning:\ %m,
 		    \%E******\ Fatal\ Error:\ %m,
 		    \%E******\ Error:\ %m,
-		    \%CLine\ %l\ column\ %c\ in\ %\\w%\\+\ (%f)\ :,
+		    \%ZLine\ %l\ column\ %c\ in\ %.%#\ (%f)\ %\\=:,
+		    \%ZLine\ %l\ columns\ %c\\,\ %\\d%\\+\ %.%#\ (%f)\ %\\=:,
+		    \%+C%*[^\ ]%.%#,
+		    \%-GThe\ source\ lines\ involved,
 		    \%-G%.%#
 
 let &cpo = s:cpo_save

runtime/compiler/tcl.vim

@@ -1,7 +1,6 @@
 " Vim compiler file
 " Compiler:	tcl
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/tcl.vim
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
 " Last Change:	2004 Nov 27
 
 if exists("current_compiler")

runtime/compiler/tidy.vim

@@ -1,11 +1,7 @@
 " Vim compiler file
 " Compiler:	HTML Tidy
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/tidy.vim
-" Last Change:	2004 Nov 27
-
-" NOTE: set 'tidy_compiler_040800' if you are using the 4th August 2000 release
-"       of HTML Tidy.
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jul 7
 
 if exists("current_compiler")
   finish
@@ -16,13 +12,7 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
   command -nargs=* CompilerSet setlocal <args>
 endif
 
-" this is needed to work around a bug in the 04/08/00 release of tidy which
-" failed to set the filename if the -quiet option was used
-if exists("tidy_compiler_040800")
-  CompilerSet makeprg=tidy\ -errors\ --gnu-emacs\ yes\ %
-else
-  CompilerSet makeprg=tidy\ -quiet\ -errors\ --gnu-emacs\ yes\ %
-endif
+CompilerSet makeprg=tidy\ -quiet\ -errors\ --gnu-emacs\ yes\ %
 
 " sample warning: foo.html:8:1: Warning: inserting missing 'foobar' element
 " sample error:   foo.html:9:2: Error: <foobar> is not recognized!

runtime/compiler/xmllint.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
 " Compiler:	xmllint
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/xmllint.vim
-" Last Change:	2004 Nov 27
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jul 8
 
 if exists("current_compiler")
   finish
@@ -16,12 +15,10 @@ endif
 let s:cpo_save = &cpo
 set cpo-=C
 
-CompilerSet makeprg=xmllint\ --valid\ --noout\ 
+CompilerSet makeprg=xmllint\ --valid\ --noout
 
-CompilerSet errorformat=%E%f:%l:\ error:\ %m,
-		    \%W%f:%l:\ warning:\ %m,
-		    \%E%f:%l:\ validity\ error:\ %m,
-		    \%W%f:%l:\ validity\ warning:\ %m,
+CompilerSet errorformat=%+E%f:%l:\ %.%#\ error\ :\ %m,
+		    \%+W%f:%l:\ %.%#\ warning\ :\ %m,
 		    \%-Z%p^,
 		    \%-G%.%#
 

runtime/doc/arabic.txt

@@ -1,4 +1,4 @@
-*arabic.txt*	For Vim version 7.3.  Last change: 2010 Nov 13
+*arabic.txt*	For Vim version 7.4.  Last change: 2010 Nov 13
 
 
 		  VIM REFERENCE MANUAL	  by Nadim Shaikli

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 7.3.  Last change: 2013 May 19
+*autocmd.txt*   For Vim version 7.4.  Last change: 2014 Jan 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -304,6 +304,9 @@ Name			triggered by ~
 |InsertCharPre|		when a character was typed in Insert mode, before
 			inserting it
 
+|TextChanged|		after a change was made to the text in Normal mode
+|TextChangedI|		after a change was made to the text in Insert mode
+
 |ColorScheme|		after loading a color scheme
 
 |RemoteReply|		a reply from a server Vim was received
@@ -480,6 +483,12 @@ CmdwinLeave			Before leaving the command-line window.
 				|cmdwin-char|
 							*ColorScheme*
 ColorScheme			After loading a color scheme. |:colorscheme|
+				The pattern is matched against the
+				colorscheme name. <afile> can be used for the
+				name of the actual file where this option was
+				set, and <amatch> for the new colorscheme
+				name.
+
 
 							*CompleteDone*
 CompleteDone			After Insert mode completion is done.  Either
@@ -513,9 +522,9 @@ CursorHold			When the user doesn't press a key for the time
 CursorHoldI			Just like CursorHold, but in Insert mode.
 
 							*CursorMoved*
-CursorMoved			After the cursor was moved in Normal mode.
-				Also when the text of the cursor line has been
-				changed, e.g., with "x", "rx" or "p".
+CursorMoved			After the cursor was moved in Normal or Visual
+				mode.  Also when the text of the cursor line
+				has been changed, e.g., with "x", "rx" or "p".
 				Not triggered when there is typeahead or when
 				an operator is pending.
 				For an example see |match-parens|.
@@ -553,6 +562,9 @@ FileChangedRO			Before making the first change to a read-only
 				It is not allowed to change to another buffer
 				here.  You can reload the buffer but not edit
 				another one.
+							*E881*
+				If the number of lines changes saving for undo
+				may fail and the change will be aborted.
 							*FileChangedShell*
 FileChangedShell		When Vim notices that the modification time of
 				a file has changed since editing started.
@@ -731,7 +743,7 @@ QuickFixCmdPost			Like QuickFixCmdPre, but after a quickfix
 				command is run, before jumping to the first
 				location. For |:cfile| and |:lfile| commands
 				it is run after error file is read and before
-				moving to the first error. 
+				moving to the first error.
 				See |QuickFixCmdPost-example|.
 							*QuitPre*
 QuitPre				When using `:quit`, `:wq` or `:qall`, before
@@ -952,7 +964,8 @@ the autocommand is executed.  This is different from the command!
 
 							*file-pattern*
 The pattern is interpreted like mostly used in file names:
-	*	matches any sequence of characters
+	*	matches any sequence of characters; Unusual: includes path
+		separators
 	?	matches any single character
 	\?	matches a '?'
 	.	matches a '.'
@@ -961,6 +974,9 @@ The pattern is interpreted like mostly used in file names:
 	\,	matches a ','
 	{ }	like \( \) in a |pattern|
 	,	inside { }: like \| in a |pattern|
+	\}	literal }
+	\{	literal {
+	\\\{n,m\}  like \{n,m} in a |pattern|
 	\	special meaning like in a |pattern|
 	[ch]	matches 'c' or 'h'
 	[^ch]   match any character but 'c' and 'h'

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 7.3.  Last change: 2013 Mar 19
+*change.txt*    For Vim version 7.4.  Last change: 2014 Feb 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -71,9 +71,21 @@ For inserting text see |insert.txt|.
 			"D" deletes the highlighted text plus all text until
 			the end of the line.  {not in Vi}
 
-					*:d* *:de* *:del* *:delete* *:dl*
+					*:d* *:de* *:del* *:delete* *:dl* *:dp*
 :[range]d[elete] [x]	Delete [range] lines (default: current line) [into
 			register x].
+			Note these weird abbreviations:
+			   :dl		delete and list
+			   :dell	idem
+			   :delel	idem
+			   :deletl	idem
+			   :deletel	idem
+			   :dp		delete and print
+			   :dep		idem
+			   :delp	idem
+			   :delep	idem
+			   :deletp	idem
+			   :deletep	idem
 
 :[range]d[elete] [x] {count}
 			Delete {count} lines, starting with [range]
@@ -144,6 +156,9 @@ only after a '.').
 The 'B' and 'M' flags in 'formatoptions' change the behavior for inserting
 spaces before and after a multi-byte character |fo-table|.
 
+The '[ mark is set at the end of the first line that was joined, '] at the end
+of the resulting line.
+
 
 ==============================================================================
 2. Delete and insert				*delete-insert* *replacing*
@@ -463,8 +478,8 @@ If the 'shiftround' option is on, the indent is rounded to a multiple of
 'shiftwidth'.
 
 If the 'smartindent' option is on, or 'cindent' is on and 'cinkeys' contains
-'#', shift right does not affect lines starting with '#' (these are supposed
-to be C preprocessor lines that must stay in column 1).
+'#' with a zero value, shift right does not affect lines starting with '#'
+(these are supposed to be C preprocessor lines that must stay in column 1).
 
 When the 'expandtab' option is off (this is the default) Vim uses <Tab>s as
 much as possible to make the indent.  You can use ">><<" to replace an indent
@@ -812,7 +827,7 @@ either the first or second pattern in parentheses did not match, so either
 <
 
 Substitute with an expression			*sub-replace-expression*
-						*sub-replace-\=*
+						*sub-replace-\=* *s/\=*
 When the substitute string starts with "\=" the remainder is interpreted as an
 expression.  This does not work recursively: a |substitute()| function inside
 the expression cannot use "\=" for the substitute string.
@@ -1057,6 +1072,11 @@ another register.  E.g., yank the text to copy, Visually select the text to
 replace and use "0p .  You can repeat this as many times as you like, the
 unnamed register will be changed each time.
 
+When you use a blockwise Visual mode command and yank only a single line into
+a register, a paste on a visual selected area will paste that single line on
+each of the selected lines (thus replacing the blockwise selected region by a
+block of the pasted line).
+
 							*blockwise-register*
 If you use a blockwise Visual mode command to get the text into the register,
 the block of text will be inserted before ("P") or after ("p") the cursor
@@ -1114,6 +1134,8 @@ less than one line (the small delete register is used then).  An exception is
 made for the delete operator with these movement commands: |%|, |(|, |)|, |`|,
 |/|, |?|, |n|, |N|, |{| and |}|.  Register "1 is always used then (this is Vi
 compatible).  The "- register is used as well if the delete is within a line.
+Note that these characters may be mapped.  E.g. |%| is mapped by the matchit
+plugin.
    With each successive deletion or change, Vim shifts the previous contents
 of register 1 into register 2, 2 into 3, and so forth, losing the previous
 contents of register 9.
@@ -1628,7 +1650,7 @@ And a few warnings:
 7. Sorting text						*sorting*
 
 Vim has a sorting function and a sorting command.  The sorting function can be
-found here: |sort()|.
+found here: |sort()|, |uniq()|.
 
 							*:sor* *:sort*
 :[range]sor[t][!] [i][u][r][n][x][o] [/{pattern}/]

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 7.3.  Last change: 2013 Mar 16
+*cmdline.txt*   For Vim version 7.4.  Last change: 2014 Feb 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -356,6 +356,10 @@ terminals)
 		List the recent five entries from all histories: >
 			:history all -5,
 
+:keepp[atterns] {command}			*:keepp* *:keeppatterns*
+		Execute {command}, without adding anything to the search
+		history
+
 ==============================================================================
 2. Command-line completion				*cmdline-completion*
 
@@ -754,6 +758,7 @@ characters have a special meaning.  These can also be used in the expression
 function expand() |expand()|.
 	%	Is replaced with the current file name.		  *:_%* *c_%*
 	#	Is replaced with the alternate file name.	  *:_#* *c_#*
+		This is remembered for every window.
 	#n	(where n is a number) is replaced with		  *:_#0* *:_#n*
 		the file name of buffer n.  "#0" is the same as "#".     *c_#n*
 	##	Is replaced with all names in the argument list	  *:_##* *c_##*
@@ -819,8 +824,8 @@ Note: these are typed literally, they are not special keys!
 		   the start of the function.
 
 							 *filename-modifiers*
-	 *:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs*
-	        *%:8* *%:p* *%:.* *%:~* *%:h* *%:t* *%:r* *%:e* *%:s* *%:gs*
+*:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs* *::S*
+     *%:8* *%:p* *%:.* *%:~* *%:h* *%:t* *%:r* *%:e* *%:s* *%:gs* *%:S*
 The file name modifiers can be used after "%", "#", "#n", "<cfile>", "<sfile>",
 "<afile>" or "<abuf>".  They are also used with the |fnamemodify()| function.
 These are not available when Vim has been compiled without the |+modify_fname|
@@ -875,6 +880,10 @@ These modifiers can be given, in this order:
 	:gs?pat?sub?
 		Substitute all occurrences of "pat" with "sub".  Otherwise
 		this works like ":s".
+	:S	Escape special characters for use with a shell command (see 
+		|shellescape()|). Must be the last one. Examples: >
+		    :!dir <cfile>:S
+		    :call system('chmod +w -- ' . expand('%:S'))
 
 Examples, when the file name is "src/version.c", current dir
 "/home/mool/vim": >

runtime/doc/debug.txt

@@ -1,4 +1,4 @@
-*debug.txt*     For Vim version 7.3.  Last change: 2012 Feb 11
+*debug.txt*     For Vim version 7.4.  Last change: 2012 Feb 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/debugger.txt

@@ -1,4 +1,4 @@
-*debugger.txt*  For Vim version 7.3.  Last change: 2005 Mar 29
+*debugger.txt*  For Vim version 7.4.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur

runtime/doc/develop.txt

@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 7.3.  Last change: 2013 Apr 27
+*develop.txt*   For Vim version 7.4.  Last change: 2014 Mar 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -19,7 +19,6 @@ code.
 
 Vim is open source software.  Everybody is encouraged to contribute to help
 improving Vim.  For sending patches a context diff "diff -c" is preferred.
-Also see http://www.vim.org/tips/tip.php?tip_id=618.
 Also see http://vim.wikia.com/wiki/How_to_make_and_submit_a_patch.
 
 ==============================================================================

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 7.3.  Last change: 2012 Sep 05
+*diff.txt*      For Vim version 7.4.  Last change: 2013 Sep 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -123,14 +123,18 @@ Since the option values are remembered with the buffer, you can edit another
 file for a moment and come back to the same file and be in diff mode again.
 
 							*:diffo* *:diffoff*
-:diffo[ff]	Switch off diff mode for the current window.
+:diffo[ff]	Switch off diff mode for the current window.  Resets related
+		options also when 'diff' was not set.
 
 :diffo[ff]!	Switch off diff mode for the current window and in all windows
-		in the current tab page where 'diff' is set.
+		in the current tab page where 'diff' is set.  Resetting
+		related options only happens in a window that has 'diff' set,
+		if the current window does not have 'diff' set then no options
+		in it are changed.
 
-The ":diffoff" command resets the relevant options to their default value.
-This may be different from what the values were before diff mode was started,
-the old values are not remembered.
+The ":diffoff" command resets the relevant options to the values they had when
+using |:diffsplit|, |:diffpatch| , |:diffthis|. or starting Vim in diff mode.
+Otherwise they are set to their default value:
 
 	'diff'		off
 	'scrollbind'	off

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 7.3.  Last change: 2011 Jan 15
+*digraph.txt*   For Vim version 7.4.  Last change: 2013 Dec 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -147,7 +147,7 @@ a standard meaning:
 	Two			2	Hook
 	Nine			9	Horn
 
-	Equals			=	Cyrillic
+	Equals			=	Cyrillic (= used as second char) 
 	Asterisk		*	Greek
 	Percent sign		%	Greek/Cyrillic special
 	Plus			+	smalls: Arabic, capitals: Hebrew

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 7.3.  Last change: 2013 Feb 07
+*editing.txt*   For Vim version 7.4.  Last change: 2013 Nov 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -38,6 +38,7 @@ If there already was a current file name, then that one becomes the alternate
 file name.  It can be used with "#" on the command line |:_#| and you can use
 the |CTRL-^| command to toggle between the current and the alternate file.
 However, the alternate file name is not changed when |:keepalt| is used.
+An alternate file name is remembered for each window.
 
 							*:keepalt* *:keepa*
 :keepalt {cmd}		Execute {cmd} while keeping the current alternate file
@@ -185,12 +186,13 @@ If you want to automatically save the changes without asking, switch on the
 that does not work for all commands.
 
 If you want to keep the changed buffer without saving it, switch on the
-'hidden' option.  See |hidden-buffer|.
+'hidden' option.  See |hidden-buffer|.  Some commands work like this even when
+'hidden' is not set, check the help for the command.
 
 ==============================================================================
 2. Editing a file					*edit-a-file*
 
-							*:e* *:edit*
+							*:e* *:edit* *reload*
 :e[dit] [++opt] [+cmd]	Edit the current file.  This is useful to re-edit the
 			current file, when it has been changed outside of Vim.
 			This fails when changes have been made to the current
@@ -199,7 +201,7 @@ If you want to keep the changed buffer without saving it, switch on the
 			Also see |++opt| and |+cmd|.
 			{Vi: no ++opt}
 
-							*:edit!*
+							*:edit!* *discard*
 :e[dit]! [++opt] [+cmd]
 			Edit the current file always.  Discard any changes to
 			the current buffer.  This is useful if you want to

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 7.3.  Last change: 2013 May 21
+*eval.txt*	For Vim version 7.4.  Last change: 2014 Apr 06
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -123,6 +123,7 @@ around the arguments, to invoke the function it refers to.  Example: >
 	:echo Fn()
 <							*E704* *E705* *E707*
 A Funcref variable must start with a capital, "s:", "w:", "t:" or "b:".  You
+can use "g:" but the following name must still start with a capital.  You
 cannot have both a Funcref variable and a function with the same name.
 
 A special case is defining a function and directly assigning its Funcref to a
@@ -147,7 +148,7 @@ arguments: >
 
 
 1.3 Lists ~
-							*List* *Lists* *E686*
+						*list* *List* *Lists* *E686*
 A List is an ordered sequence of items.  An item can be of any type.  Items
 can be accessed by their index number.	Items can be added and removed at any
 position in the sequence.
@@ -326,6 +327,7 @@ examples: >
 Changing the order of items in a list: >
 	:call sort(list)		" sort a list alphabetically
 	:call reverse(list)		" reverse the order of items
+	:call uniq(sort(list))		" sort and remove duplicates
 
 
 For loop ~
@@ -392,7 +394,7 @@ example, to add up all the numbers in a list: >
 
 
 1.4 Dictionaries ~
-						*Dictionaries* *Dictionary*
+					*dict* *Dictionaries* *Dictionary*
 A Dictionary is an associative array: Each entry has a key and a value.  The
 entry can be located with the key.  The entries are stored without a specific
 ordering.
@@ -1003,7 +1005,7 @@ function.  Example: >
 
 
 
-string							*expr-string* *E114*
+string						*string* *expr-string* *E114*
 ------
 "string"		string constant		*expr-quote*
 
@@ -1142,7 +1144,7 @@ specified by what is prepended:
 |local-variable|     l:	  Local to a function.
 |script-variable|    s:	  Local to a |:source|'ed Vim script.
 |function-argument|  a:	  Function argument (only inside a function).
-|vim-variable|	     v:	  Global, predefined by Vim.
+|vim-variable|       v:	  Global, predefined by Vim.
 
 The scope name by itself can be used as a |Dictionary|.  For example, to
 delete all script-local variables: >
@@ -1454,6 +1456,13 @@ v:foldend	Used for 'foldtext': last line of closed fold.
 v:foldstart	Used for 'foldtext': first line of closed fold.
 		Read-only in the |sandbox|. |fold-foldtext|
 
+					*v:hlsearch* *hlsearch-variable*
+v:hlsearch	Variable that determines whether search highlighting is on. 
+		Makes sense only if 'hlsearch' is enabled which requires 
+		|+extra_search|. Setting this variable to zero acts the like 
+		|:nohlsearch| command, setting it to one acts like >
+			let &hlsearch = &hlsearch
+<
 					*v:insertmode* *insertmode-variable*
 v:insertmode	Used for the |InsertEnter| and |InsertChange| autocommand
 		events.  Values:
@@ -1511,6 +1520,7 @@ v:oldfiles	List of file names that is loaded from the |viminfo| file on
 		startup.  These are the files that Vim remembers marks for.
 		The length of the List is limited by the ' argument of the
 		'viminfo' option (default is 100).
+		When the |viminfo| file is not used the List is empty.
 		Also see |:oldfiles| and |c_#<|.
 		The List can be modified, but this has no effect on what is
 		stored in the |viminfo| file later.  If you use values other
@@ -1546,6 +1556,16 @@ v:profiling	Normally zero.	Set to one after using ":profile start".
 v:progname	Contains the name (with path removed) with which Vim was
 		invoked.  Allows you to do special initialisations for |view|,
 		|evim| etc., or any other name you might symlink to Vim.
+		Read-only.
+
+					*v:progpath* *progpath-variable*
+v:progpath	Contains the command with which Vim was invoked, including the
+		path.  Useful if you want to message a Vim server using a
+		|--remote-expr|.
+		To get the full path use: >
+			echo exepath(v:progpath)
+<		NOTE: This does not work when the command is a relative path
+		and the current directory has changed.
 		Read-only.
 
 					*v:register* *register-variable*
@@ -1662,7 +1682,7 @@ v:version	Version number of Vim: Major version number times 100 plus
 		is 501.  Read-only.  "version" also works, for backwards
 		compatibility.
 		Use |has()| to check if a certain patch was included, e.g.: >
-			if has("patch123")
+			if has("patch-7.4.123")
 <		Note that patch numbers are specific to the version, thus both
 		version 5.0 and 5.1 may have a patch 123, but these are
 		completely different.
@@ -1712,6 +1732,7 @@ bufnr( {expr})			Number	Number of the buffer {expr}
 bufwinnr( {expr})		Number	window number of buffer {expr}
 byte2line( {byte})		Number	line number at byte count {byte}
 byteidx( {expr}, {nr})		Number	byte index of {nr}'th char in {expr}
+byteidxcomp( {expr}, {nr})	Number	byte index of {nr}'th char in {expr}
 call( {func}, {arglist} [, {dict}])
 				any	call {func} with arguments {arglist}
 ceil( {expr})			Float	round {expr} up
@@ -1735,7 +1756,7 @@ cscope_connection( [{num} , {dbpath} [, {prepend}]])
 cursor( {lnum}, {col} [, {coladd}])
 				Number	move cursor to {lnum}, {col}, {coladd}
 cursor( {list})			Number	move cursor to position in {list}
-deepcopy( {expr})		any	make a full copy of {expr}
+deepcopy( {expr} [, {noref}])	any	make a full copy of {expr}
 delete( {fname})		Number	delete file {fname}
 did_filetype()			Number	TRUE if FileType autocommand event used
 diff_filler( {lnum})		Number	diff filler lines about {lnum}
@@ -1745,6 +1766,7 @@ escape( {string}, {chars})	String	escape {chars} in {string} with '\'
 eval( {string})			any	evaluate {string} into its value
 eventhandler( )			Number	TRUE if inside an event handler
 executable( {expr})		Number	1 if executable {expr} exists
+exepath( {expr})		String  full path of the command {expr}
 exists( {expr})			Number	TRUE if {expr} exists
 extend( {expr1}, {expr2} [, {expr3}])
 				List/Dict insert items of {expr2} into {expr1}
@@ -1797,7 +1819,8 @@ getmatches()			List	list of current matches
 getpid()			Number	process ID of Vim
 getpos( {expr})			List	position of cursor, mark, etc.
 getqflist()			List	list of quickfix items
-getreg( [{regname} [, 1]])	String	contents of register
+getreg( [{regname} [, 1 [, {list}]]])
+				String or List   contents of register
 getregtype( [{regname}])	String	type of register
 gettabvar( {nr}, {varname} [, {def}])
 				any	variable {varname} in tab {nr} or {def}
@@ -1906,6 +1929,8 @@ repeat( {expr}, {count})	String	repeat {expr} {count} times
 resolve( {filename})		String	get filename a shortcut points to
 reverse( {list})		List	reverse {list} in-place
 round( {expr})			Float	round off {expr}
+screenattr( {row}, {col})	Number	attribute at screen position
+screenchar( {row}, {col})	Number	character at screen position
 screencol()			Number	current cursor column
 screenrow()			Number	current cursor row
 search( {pattern} [, {flags} [, {stopline} [, {timeout}]]])
@@ -1966,7 +1991,8 @@ strridx( {haystack}, {needle} [, {start}])
 				Number	last index of {needle} in {haystack}
 strtrans( {expr})		String	translate string to make it printable
 strwidth( {expr})		Number	display cell length of the String {expr}
-submatch( {nr})			String	specific match in ":s" or substitute()
+submatch( {nr}[, {list}])	String or List
+					specific match in ":s" or substitute()
 substitute( {expr}, {pat}, {sub}, {flags})
 				String	all {pat} in {expr} replaced with {sub}
 synID( {lnum}, {col}, {trans})	Number	syntax ID at {lnum} and {col}
@@ -1976,6 +2002,7 @@ synIDtrans( {synID})		Number	translated syntax ID of {synID}
 synconcealed( {lnum}, {col})	List    info about concealing
 synstack( {lnum}, {col})	List	stack of syntax IDs at {lnum} and {col}
 system( {expr} [, {input}])	String	output of shell command/filter {expr}
+systemlist( {expr} [, {input}])	List	output of shell command/filter {expr}
 tabpagebuflist( [{arg}])	List	list of buffer numbers in tab page
 tabpagenr( [{arg}])		Number	number of current or last tab page
 tabpagewinnr( {tabarg}[, {arg}])
@@ -1993,6 +2020,8 @@ trunc( {expr})			Float	truncate Float {expr}
 type( {name})			Number	type of variable {name}
 undofile( {name})		String	undo file name for {name}
 undotree()			List	undo file tree
+uniq( {list} [, {func} [, {dict}]])
+				List	remove adjacent duplicates from a list
 values( {dict})			List	values in {dict}
 virtcol( {expr})		Number	screen column of cursor or mark
 visualmode( [expr])		String	last visual mode used
@@ -2258,7 +2287,10 @@ byteidx({expr}, {nr})					*byteidx()*
 		{expr}.  Use zero for the first character, it returns zero.
 		This function is only useful when there are multibyte
 		characters, otherwise the returned value is equal to {nr}.
-		Composing characters are counted as a separate character.
+		Composing characters are not counted separately, their byte
+		length is added to the preceding base character.  See
+		|byteidxcomp()| below for counting composing characters
+		separately.
 		Example : >
 			echo matchstr(str, ".", byteidx(str, 3))
 <		will display the fourth character.  Another way to do the
@@ -2267,7 +2299,20 @@ byteidx({expr}, {nr})					*byteidx()*
 			echo strpart(s, 0, byteidx(s, 1))
 <		If there are less than {nr} characters -1 is returned.
 		If there are exactly {nr} characters the length of the string
-		is returned.
+		in bytes is returned.
+
+byteidxcomp({expr}, {nr})					*byteidxcomp()*
+		Like byteidx(), except that a composing character is counted
+		as a separate character.  Example: >
+			let s = 'e' . nr2char(0x301)
+			echo byteidx(s, 1)
+			echo byteidxcomp(s, 1)
+			echo byteidxcomp(s, 2)
+<		The first and third echo result in 3 ('e' plus composing
+		character is 3 bytes), the second echo results in 1 ('e' is
+		one byte).
+		Only works different from byteidx() when 'encoding' is set to
+		a Unicode encoding.
 
 call({func}, {arglist} [, {dict}])			*call()* *E699*
 		Call function {func} with the items in |List| {arglist} as
@@ -2669,6 +2714,15 @@ executable({expr})					*executable()*
 			0	does not exist
 			-1	not implemented on this system
 
+exepath({expr})						*exepath()*
+		If {expr} is an executable and is either an absolute path, a
+		relative path or found in $PATH, return the full path.
+		Note that the current directory is used when {expr} starts
+		with "./", which may be a problem for Vim: >
+			echo exepath(v:progpath)
+<		If {expr} cannot be found in $PATH or is not executable then
+		an empty string is returned.
+
 							*exists()*
 exists({expr})	The result is a Number, which is non-zero if {expr} is
 		defined, zero otherwise.  The {expr} argument is a string,
@@ -2773,7 +2827,8 @@ expand({expr} [, {nosuf} [, {list}]])				*expand()*
 		file name contains a space]
 
 		If the expansion fails, the result is an empty string.	A name
-		for a non-existing file is not included.
+		for a non-existing file is not included, unless {expr} does
+		not start with '%', '#' or '<', see below.
 
 		When {expr} starts with '%', '#' or '<', the expansion is done
 		like for the |cmdline-special| variables with their associated
@@ -2786,7 +2841,7 @@ expand({expr} [, {nosuf} [, {list}]])				*expand()*
 			<afile>		autocmd file name
 			<abuf>		autocmd buffer number (as a String!)
 			<amatch>	autocmd matched name
-			<sfile>		sourced script file name
+			<sfile>		sourced script file or function name
 			<slnum>		sourced script file line number
 			<cword>		word under the cursor
 			<cWORD>		WORD under the cursor
@@ -3172,7 +3227,7 @@ getchar([expr])						*getchar()*
 		If [expr] is 1, only check if a character is available, it is
 			not consumed.  Return zero if no character available.
 
-		Without {expr} and when {expr} is 0 a whole character or
+		Without [expr] and when [expr] is 0 a whole character or
 		special key is returned.  If it is an 8-bit character, the
 		result is a number.  Use nr2char() to convert it to a String.
 		Otherwise a String is returned with the encoded character.
@@ -3182,7 +3237,7 @@ getchar([expr])						*getchar()*
 		String when a modifier (shift, control, alt) was used that is
 		not included in the character.
 
-		When {expr} is 1 only the first byte is returned.  For a
+		When [expr] is 1 only the first byte is returned.  For a
 		one-byte character it is the character itself as a number.
 		Use nr2char() to convert it to a String.
 
@@ -3414,7 +3469,7 @@ getqflist()						*getqflist()*
 			:endfor
 
 
-getreg([{regname} [, 1]])				*getreg()*
+getreg([{regname} [, 1 [, {list}]]])			*getreg()*
 		The result is a String, which is the contents of register
 		{regname}.  Example: >
 			:let cliptext = getreg('*')
@@ -3423,6 +3478,11 @@ getreg([{regname} [, 1]])				*getreg()*
 		getreg('=', 1) returns the expression itself, so that it can
 		be restored with |setreg()|.  For other registers the extra
 		argument is ignored, thus you can always give it.
+		If {list} is present and non-zero result type is changed to 
+		|List|. Each list item is one text line. Use it if you care
+		about zero bytes possibly present inside register: without
+		third argument both NLs and zero bytes are represented as NLs
+		(see |NL-used-for-Nul|).
 		If {regname} is not specified, |v:register| is used.
 
 
@@ -3432,7 +3492,7 @@ getregtype([{regname}])					*getregtype()*
 		    "v"			for |characterwise| text
 		    "V"			for |linewise| text
 		    "<CTRL-V>{width}"	for |blockwise-visual| text
-		    0			for an empty or unknown register
+		    ""			for an empty or unknown register
 		<CTRL-V> is one character with value 0x16.
 		If {regname} is not specified, |v:register| is used.
 
@@ -4106,6 +4166,8 @@ maparg({name}[, {mode} [, {abbr} [, {dict}]]])			*maparg()*
 				     (|mapmode-ic|)
 		  "sid"	     The script local ID, used for <sid> mappings
 			     (|<SID>|).
+		  "nowait"   Do not wait for other, longer mappings.
+			     (|:map-<nowait>|).
 
 		The mappings local to the current buffer are checked first,
 		then the global mappings.
@@ -4207,6 +4269,9 @@ matchadd({group}, {pattern}[, {priority}[, {id}]])
 		"match").  It will be highlighted with {group}.  Returns an
 		identification number (ID), which can be used to delete the
 		match using |matchdelete()|.
+		Matching is case sensitive and magic, unless case sensitivity
+		or magicness are explicitly overridden in {pattern}.  The
+		'magic', 'smartcase' and 'ignorecase' options are not used.
 
 		The optional {priority} argument assigns a priority to the
 		match.	A match with a high priority will have its
@@ -4416,6 +4481,9 @@ getpos({expr})	Get the position for {expr}.  For possible values of {expr}
 		it is the offset in screen columns from the start of the
 		character.  E.g., a position within a <Tab> or after the last
 		character.
+		Note that for '< and '> Visual mode matters: when it is "V"
+		(visual line mode) the column of '< is zero and the column of
+		'> is a large number.
 		This can be used to save and restore the cursor position: >
 			let save_cursor = getpos(".")
 			MoveTheCursorAround
@@ -4890,6 +4958,21 @@ round({expr})							*round()*
 <			-5.0
 		{only available when compiled with the |+float| feature}
 
+screenattr(row, col)						*screenattr()*
+		Like screenchar(), but return the attribute.  This is a rather
+		arbitrary number that can only be used to compare to the
+		attribute at other positions.
+
+screenchar(row, col)						*screenchar()*
+		The result is a Number, which is the character at position
+		[row, col] on the screen.  This works for every possible
+		screen position, also status lines, window separators and the
+		command line.  The top left position is row one, column one
+		The character excludes composing characters.  For double-byte
+		encodings it may only be the first byte.
+		This is mainly to be used for testing.
+		Returns -1 when row or col is out of range.
+
 screencol()							*screencol()*
 		The result is a Number, which is the current screen column of
 		the cursor. The leftmost column has number 1.
@@ -5224,6 +5307,10 @@ setpos({expr}, {list})
 		character.  E.g., a position within a <Tab> or after the last
 		character.
 
+		Note that for '< and '> changing the line number may result in
+		the marks to be effectively be swapped, so that '< is always
+		before '>.
+
 		Returns 0 when the position could be set, -1 otherwise.
 		An error message is given if {expr} is invalid.
 
@@ -5282,6 +5369,8 @@ setqflist({list} [, {action}])				*setqflist()*
 							*setreg()*
 setreg({regname}, {value} [,{options}])
 		Set the register {regname} to {value}.
+		{value} may be any value returned by |getreg()|, including 
+		a |List|.
 		If {options} contains "a" or {regname} is upper case,
 		then the value is appended.
 		{options} can also contain a register type specification:
@@ -5294,10 +5383,15 @@ setreg({regname}, {value} [,{options}])
 		in the longest line (counting a <Tab> as 1 character).
 
 		If {options} contains no register settings, then the default
-		is to use character mode unless {value} ends in a <NL>.
-		Setting the '=' register is not possible, but you can use >
-			:let @= = var_expr
-<		Returns zero for success, non-zero for failure.
+		is to use character mode unless {value} ends in a <NL> for 
+		string {value} and linewise mode for list {value}. Blockwise 
+		mode is never selected automatically.
+		Returns zero for success, non-zero for failure.
+
+							*E883*
+		Note: you may not use |List| containing more then one item to 
+		      set search and expression registers. Lists containing no 
+		      items act like empty strings.
 
 		Examples: >
 			:call setreg(v:register, @*)
@@ -5305,8 +5399,11 @@ setreg({regname}, {value} [,{options}])
 			:call setreg('a', "1\n2\n3", 'b5')
 
 <		This example shows using the functions to save and restore a
-		register. >
-			:let var_a = getreg('a', 1)
+		register (note: you may not reliably restore register value 
+		without using the third argument to |getreg()| as without it 
+		newlines are represented as newlines AND Nul bytes are 
+		represented as newlines as well, see |NL-used-for-Nul|). >
+			:let var_a = getreg('a', 1, 1)
 			:let var_amode = getregtype('a')
 			    ....
 			:call setreg('a', var_a, var_amode)
@@ -5372,6 +5469,7 @@ shellescape({string} [, {special}])			*shellescape()*
 <		This results in a directory listing for the file under the
 		cursor.  Example of use with |system()|: >
 		    :call system("chmod +w -- " . shellescape(expand("%")))
+<		See also |::S|.
 
 
 shiftwidth()						*shiftwidth()*
@@ -5431,20 +5529,26 @@ sinh({expr})						*sinh()*
 
 
 sort({list} [, {func} [, {dict}]])			*sort()* *E702*
-		Sort the items in {list} in-place.  Returns {list}.  If you
-		want a list to remain unmodified make a copy first: >
+		Sort the items in {list} in-place.  Returns {list}.
+		
+		If you want a list to remain unmodified make a copy first: >
 			:let sortedlist = sort(copy(mylist))
 <		Uses the string representation of each item to sort on.
 		Numbers sort after Strings, |Lists| after Numbers.
 		For sorting text in the current buffer use |:sort|.
+
 		When {func} is given and it is one then case is ignored.
-		{dict} is for functions with the "dict" attribute.  It will be
-		used to set the local variable "self". |Dictionary-function|
 		When {func} is a |Funcref| or a function name, this function
 		is called to compare items.  The function is invoked with two
 		items as argument and must return zero if they are equal, 1 or
 		bigger if the first one sorts after the second one, -1 or
 		smaller if the first one sorts before the second one.
+
+		{dict} is for functions with the "dict" attribute.  It will be
+		used to set the local variable "self". |Dictionary-function|
+
+		Also see |uniq()|.
+
 		Example: >
 			func MyCompare(i1, i2)
 			   return a:i1 == a:i2 ? 0 : a:i1 > a:i2 ? 1 : -1
@@ -5586,7 +5690,7 @@ strchars({expr})					*strchars()*
 
 strdisplaywidth({expr}[, {col}])			*strdisplaywidth()*
 		The result is a Number, which is the number of display cells
-		String {expr} occupies on the screen.
+		String {expr} occupies on the screen when it starts a {col}.
 		When {col} is omitted zero is used.  Otherwise it is the
 		screen column where to start.  This matters for Tab
 		characters.
@@ -5711,12 +5815,23 @@ strwidth({expr})					*strwidth()*
 		Ambiguous, this function's return value depends on 'ambiwidth'.
 		Also see |strlen()|, |strdisplaywidth()| and |strchars()|.
 
-submatch({nr})						*submatch()*
+submatch({nr}[, {list}])				*submatch()*
 		Only for an expression in a |:substitute| command or
 		substitute() function.
 		Returns the {nr}'th submatch of the matched text.  When {nr}
 		is 0 the whole matched text is returned.
+		Note that a NL in the string can stand for a line break of a
+		multi-line match or a NUL character in the text.
 		Also see |sub-replace-expression|.
+
+		If {list} is present and non-zero then submatch() returns 
+		a list of strings, similar to |getline()| with two arguments. 
+		NL characters in the text represent NUL characters in the
+		text.
+		Only returns more than one item for |:substitute|, inside
+		|substitute()| this list will always contain one or zero
+		items, since there are no real line breaks.
+
 		Example: >
 			:s/\d\+/\=submatch(0) + 1/
 <		This finds the first number in the line and adds one to it.
@@ -5849,23 +5964,36 @@ synstack({lnum}, {col})					*synstack()*
 		valid positions.
 
 system({expr} [, {input}])				*system()* *E677*
-		Get the output of the shell command {expr}.
-		When {input} is given, this string is written to a file and
-		passed as stdin to the command.  The string is written as-is,
-		you need to take care of using the correct line separators
-		yourself.  Pipes are not used.
-		Note: Use |shellescape()| to escape special characters in a
-		command argument.  Newlines in {expr} may cause the command to
-		fail.  The characters in 'shellquote' and 'shellxquote' may
-		also cause trouble.
+		Get the output of the shell command {expr} as a string.  See
+		|systemlist()| to get the output as a List.
+
+		When {input} is given and is a string this string is written 
+		to a file and passed as stdin to the command.  The string is 
+		written as-is, you need to take care of using the correct line 
+		separators yourself.
+		If {input} is given and is a |List| it is written to the file
+		in a way |writefile()| does with {binary} set to "b" (i.e.
+		with a newline between each list item with newlines inside
+		list items converted to NULs).  
+		Pipes are not used.
+
+		Note: Use |shellescape()| or |::S| with |expand()| or 
+		|fnamemodify()| to escape special characters in a command 
+		argument.  Newlines in {expr} may cause the command to fail.  
+		The characters in 'shellquote' and 'shellxquote' may also 
+		cause trouble.
 		This is not to be used for interactive commands.
 
 		The result is a String.  Example: >
 		    :let files = system("ls " .  shellescape(expand('%:h')))
+		    :let files = system('ls ' . expand('%:h:S'))
 
 <		To make the result more system-independent, the shell output
 		is filtered to replace <CR> with <NL> for Macintosh, and
 		<CR><NL> with <NL> for DOS-like systems.
+		To avoid the string being truncated at a NUL, all NUL
+		characters are replaced with SOH (0x01).
+
 		The command executed is constructed using several options:
 	'shell' 'shellcmdflag' 'shellxquote' {expr} 'shellredir' {tmp} 'shellxquote'
 		({tmp} is an automatically generated file name).
@@ -5885,6 +6013,16 @@ system({expr} [, {input}])				*system()* *E677*
 		Use |:checktime| to force a check.
 
 
+systemlist({expr} [, {input}])				*systemlist()*
+		Same as |system()|, but returns a |List| with lines (parts of 
+		output separated by NL) with NULs transformed into NLs. Output 
+		is the same as |readfile()| will output with {binary} argument 
+		set to "b".
+
+		Returns an empty string on error, so be careful not to run 
+		into |E706|.
+
+
 tabpagebuflist([{arg}])					*tabpagebuflist()*
 		The result is a |List|, where each item is the number of the
 		buffer associated with each window in the current tab page.
@@ -5907,7 +6045,7 @@ tabpagenr([{arg}])					*tabpagenr()*
 		The number can be used with the |:tab| command.
 
 
-tabpagewinnr({tabarg}, [{arg}])				*tabpagewinnr()*
+tabpagewinnr({tabarg} [, {arg}])			*tabpagewinnr()*
 		Like |winnr()| but for tab page {tabarg}.
 		{tabarg} specifies the number of tab page to be used.
 		{arg} is used like with |winnr()|:
@@ -6107,6 +6245,14 @@ undotree()						*undotree()*
 				blocks.  Each item may again have an "alt"
 				item.
 
+uniq({list} [, {func} [, {dict}]])			*uniq()* *E882*
+		Remove second and succeeding copies of repeated adjacent
+		{list} items in-place.  Returns {list}.  If you want a list
+		to remain unmodified make a copy first: >
+			:let newlist = uniq(copy(mylist))
+<		The default compare function uses the string representation of
+		each item.  For the use of {func} and {dict} see |sort()|.
+
 values({dict})						*values()*
 		Return a |List| with all the values of {dict}.	The |List| is
 		in arbitrary order.
@@ -6309,13 +6455,23 @@ There are three types of features:
     Example: >
 	:if has("gui_running")
 <							*has-patch*
-3.  Included patches.  First check |v:version| for the version of Vim.
-    Then the "patch123" feature means that patch 123 has been included for
-    this version.  Example (checking version 6.2.148 or later): >
+3.  Included patches.  The "patch123" feature means that patch 123 has been
+    included.  Note that this form does not check the version of Vim, you need
+    to inspect |v:version| for that.
+    Example (checking version 6.2.148 or later): >
 	:if v:version > 602 || v:version == 602 && has("patch148")
-<   Note that it's possible for patch 147 to be omitted even though 148 is
+<    Note that it's possible for patch 147 to be omitted even though 148 is
     included.
 
+4.  Beyond a certain version or at a certain version and including a specific
+    patch.  The "patch-7.4.123" feature means that the Vim version is 7.5 or
+    later, or it is version 7.4 and patch 123 was included.
+    The example above can be simplified to: >
+	:if has("patch-6.2.148")
+<    Note that it's possible for patch 147 to be omitted even though 148 is
+    included.
+
+acl			Compiled with |ACL| support.
 all_builtin_terms	Compiled with all builtin terminals enabled.
 amiga			Amiga version of Vim.
 arabic			Compiled with Arabic support |Arabic|.
@@ -6482,7 +6638,9 @@ windows			Compiled with support for more than one window.
 writebackup		Compiled with 'writebackup' default on.
 xfontset		Compiled with X fontset support |xfontset|.
 xim			Compiled with X input method support |xim|.
-xpm_w32			Compiled with pixmap support for Win32.
+xpm			Compiled with pixmap support.
+xpm_w32			Compiled with pixmap support for Win32. (Only for
+			backward compatibility. Use "xpm" instead.)
 xsmp			Compiled with X session management support.
 xsmp_interact		Compiled with interactive X session management support.
 xterm_clipboard		Compiled with support for xterm clipboard.
@@ -6559,7 +6717,8 @@ See |:verbose-cmd| for more information.
 :fu[nction][!] {name}([arguments]) [range] [abort] [dict]
 			Define a new function by the name {name}.  The name
 			must be made of alphanumeric characters and '_', and
-			must start with a capital or "s:" (see above).
+			must start with a capital or "s:" (see above).  When
+			using a capital "g:" be prepended.
 
 			{name} can also be a |Dictionary| entry that is a
 			|Funcref|: >
@@ -6578,7 +6737,7 @@ See |:verbose-cmd| for more information.
 
 			For the {arguments} see |function-argument|.
 
-						*a:firstline* *a:lastline*
+					*:func-range* *a:firstline* *a:lastline*
 			When the [range] argument is added, the function is
 			expected to take care of a range itself.  The range is
 			passed as "a:firstline" and "a:lastline".  If [range]
@@ -6587,10 +6746,10 @@ See |:verbose-cmd| for more information.
 			of each line.  See |function-range-example|.
 			The cursor is still moved to the first line of the
 			range, as is the case with all Ex commands.
-
+								*:func-abort*
 			When the [abort] argument is added, the function will
 			abort as soon as an error is detected.
-
+								*:func-dict*
 			When the [dict] argument is added, the function must
 			be invoked through an entry in a |Dictionary|.	The
 			local variable "self" will then be set to the
@@ -7252,6 +7411,8 @@ This does NOT work: >
 			{pattern}, so long as it does not have a special
 			meaning (e.g., '|' or '"') and doesn't occur inside
 			{pattern}.
+			Information about the exception is available in
+			|v:exception|.  Also see |throw-variables|.
 			NOTE: It is not reliable to ":catch" the TEXT of
 			an error message because it may vary in different
 			locales.
@@ -7395,13 +7556,22 @@ This does NOT work: >
 			for Vim commands, |shellescape()| for |:!| commands.
 			Examples: >
 		:execute "e " . fnameescape(filename)
-		:execute "!ls " . shellescape(expand('%:h'), 1)
+		:execute "!ls " . shellescape(filename, 1)
 <
 			Note: The executed string may be any command-line, but
-			you cannot start or end a "while", "for" or "if"
-			command.  Thus this is illegal: >
-		:execute 'while i > 5'
-		:execute 'echo "test" | break'
+			starting or ending "if", "while" and "for" does not
+			always work, because when commands are skipped the
+			":execute" is not evaluated and Vim loses track of
+			where blocks start and end.  Also "break" and
+			"continue" should not be inside ":execute".
+			This example does not work, because the ":execute" is
+			not evaluated and Vim does not see the "while", and
+			gives an error for finding an ":endwhile": >
+		:if 0
+		: execute 'while i > 5'
+		:  echo "test"
+		: endwhile
+		:endif
 <
 			It is allowed to have a "while" or "if" command
 			completely in the executed string: >

runtime/doc/evim-ja.UTF-8.1

@@ -0,0 +1,51 @@
+.TH EVIM 1 "2002 February 16"
+.SH 名前
+evim \- easy Vim, モードレスエディタ Vim
+.SH 書式
+.br
+.B evim
+[options] [file ..]
+.br
+.B eview
+.SH 説明
+.B eVim
+は
+.B Vim
+を起動して、モードレスエディタとして動作するためのオプションを設定します。
+Vim の動作が point-and-click エディタのような動作になります。
+MS-Windows のメモ帳のような動作です。
+.B eVim
+は常に GUI で起動し、メニューとツールバーを表示します。
+.PP
+どうしても Vim の操作に馴染めない場合に使ってください。
+編集効率は下がります。
+.PP
+.B eview
+は同様に、読み込み専用モードで起動します。evim \-R と同じです。
+.PP
+引数や Vim についての詳細は vim(1) を参照してください。
+.PP
+オプション 'insertmode' が設定され、テキストを直接、入力できるようになりま
+す。
+.br
+コピーとペーストのキー操作が MS-Windows と同じになるように、マップが設定され
+ます。
+CTRL-X が切り取り、CTRL-C がコピー、CTRL-V がペーストです。
+標準の CTRL-V の操作は CTRL-Q に割り当てられます。
+.SH オプション
+vim(1) を参照してください。
+.SH ファイル
+.TP 15
+/usr/local/lib/vim/evim.vim
+eVim の初期化スクリプト。
+.SH 別名
+evim は "gumbies のための Vim" とも呼ばれています。
+evim を使っているあなたはきっと、頭にハンカチをかぶっているのです。
+(訳注: gumbies は Monty Python に登場するおもしろ集団。ハンカチをかぶっ
+ている。)
+.SH 関連項目
+vim(1)
+.SH 著者
+.B Vim
+のほとんどの機能は Bram Moolenaar が開発し、多くの人が協力しました。
+メニューの Help/Credits を参照してください。

runtime/doc/farsi.txt

@@ -1,4 +1,4 @@
-*farsi.txt*     For Vim version 7.3.  Last change: 2010 Aug 07
+*farsi.txt*     For Vim version 7.4.  Last change: 2010 Aug 07
 
 
 		  VIM REFERENCE MANUAL    by Mortaza Ghassab Shiran

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 7.3.  Last change: 2013 May 25
+*filetype.txt*  For Vim version 7.4.  Last change: 2013 Dec 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -447,23 +447,25 @@ g:changelog_new_date_format
 				%%	insert a single '%' character
 				%d	insert the date from above
 				%u	insert the user from above
+                                %p	insert result of b:changelog_entry_prefix
 				%c	where to position cursor when done
-			The default is "%d  %u\n\n\t* %c\n\n", which produces
+			The default is "%d  %u\n\n\t* %p%c\n\n", which produces
 			something like (| is where cursor will be, unless at
 			the start of the line where it denotes the beginning
 			of the line) >
 				|2003-01-14  Full Name  <user@host>
 				|
-				|        * |
+				|        * prefix|
 <
 g:changelog_new_entry_format
 			The format used when creating a new entry.
 			The following table describes special tokens in the
 			string:
+                                %p	insert result of b:changelog_entry_prefix
 				%c	where to position cursor when done
 			The default is "\t*%c", which produces something
 			similar to >
-				|        * |
+				|        * prefix|
 <
 g:changelog_date_entry_search
 			The search pattern to use when searching for a

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 7.3.  Last change: 2010 May 13
+*fold.txt*      For Vim version 7.4.  Last change: 2013 Dec 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -285,9 +285,10 @@ zF		Create a fold for [count] lines.  Works like "zf".
 							*zd* *E351*
 zd		Delete one fold at the cursor.  When the cursor is on a folded
 		line, that fold is deleted.  Nested folds are moved one level
-		up.  In Visual mode all folds (partially) in the selected area
-		are deleted.  Careful: This easily deletes more folds than you
-		expect and there is no undo.
+		up.  In Visual mode one level of all folds (partially) in the
+		selected area are deleted.
+		Careful: This easily deletes more folds than you expect and
+		there is no undo for manual folding.
 		This only works when 'foldmethod' is "manual" or "marker".
 		Also see |fold-delete-marker|.
 

runtime/doc/ft_ada.txt

@@ -1,4 +1,4 @@
-*ft_ada.txt*	For Vim version 7.3.  Last change: 2010 Jul 20
+*ft_ada.txt*	For Vim version 7.4.  Last change: 2010 Jul 20
 
 
 		    ADA FILE TYPE PLUG-INS REFERENCE MANUAL~

runtime/doc/ft_sql.txt

@@ -1,4 +1,4 @@
-*ft_sql.txt*	For Vim version 7.3.  Last change: 2013 May 15
+*ft_sql.txt*	For Vim version 7.4.  Last change: 2013 May 15
 
 by David Fishburn
 

runtime/doc/gui.txt

@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 7.3.  Last change: 2011 Jul 22
+*gui.txt*       For Vim version 7.4.  Last change: 2014 Mar 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -93,10 +93,16 @@ and initialize other things that you may want to set up differently from the
 terminal version.
 
 Recommended place for your personal GUI initializations:
-	Unix		    $HOME/.gvimrc
-	OS/2		    $HOME/.gvimrc or $VIM/.gvimrc
-	MS-DOS and Win32    $HOME/_gvimrc or $VIM/_gvimrc
-	Amiga		    s:.gvimrc or $VIM/.gvimrc
+	Unix		    $HOME/.gvimrc or $HOME/.vim/gvimrc
+	OS/2		    $HOME/.gvimrc, $HOME/vimfiles/gvimrc
+			    or $VIM/.gvimrc
+	MS-DOS and Win32    $HOME/_gvimrc, $HOME/vimfiles/gvimrc
+			    or $VIM/_gvimrc
+	Amiga		    s:.gvimrc, home:.gvimrc, home:vimfiles:gvimrc
+			    or $VIM/.gvimrc
+
+The personal initialization files are searched in the order specified above
+and only the first one that is found is read.
 
 There are a number of options which only have meaning in the GUI version of
 Vim.  These are 'guicursor', 'guifont', 'guipty' and 'guioptions'.  They are
@@ -127,6 +133,7 @@ task bar with the 'guiheadroom' option.
 :winp[os]
 		Display current position of the top left corner of the GUI vim
 		window in pixels.  Does not work in all versions.
+		Also see |getwinposx()| and |getwinposy()|.
 
 :winp[os] {X} {Y}							*E466*
 		Put the GUI vim window at the given {X} and {Y} coordinates.
@@ -145,8 +152,11 @@ task bar with the 'guiheadroom' option.
 		option.
 
 If you are running the X Window System, you can get information about the
-window Vim is running in with this command: >
+window Vim is running in with these commands: >
 	:!xwininfo -id $WINDOWID
+	:!xprop -id $WINDOWID
+	:execute '!xwininfo -id ' . v:windowid
+	:execute '!xprop -id ' . v:windowid
 <
 							*gui-IME* *iBus*
 Input methods for international characters in X that rely on the XIM

runtime/doc/gui_w16.txt

@@ -1,4 +1,4 @@
-*gui_w16.txt*   For Vim version 7.3.  Last change: 2005 Mar 29
+*gui_w16.txt*   For Vim version 7.4.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 7.3.  Last change: 2012 Aug 04
+*gui_w32.txt*   For Vim version 7.4.  Last change: 2012 Aug 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/gui_x11.txt

@@ -1,4 +1,4 @@
-*gui_x11.txt*   For Vim version 7.3.  Last change: 2011 Sep 14
+*gui_x11.txt*   For Vim version 7.4.  Last change: 2014 Mar 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -442,7 +442,7 @@ command line argument).
 							*gui-x11-kde*
 There is no KDE version of Vim.  There has been some work on a port using the
 Qt toolkit, but it never worked properly and it has been abandoned.  Work
-continues on Yzis: www.yzis.org.
+continues on Yzis: https://github.com/chrizel/Yzis.
 
 ==============================================================================
 8. Compiling						*gui-x11-compiling*

runtime/doc/hangulin.txt

@@ -1,4 +1,4 @@
-*hangulin.txt*  For Vim version 7.3.  Last change: 2009 Jun 24
+*hangulin.txt*  For Vim version 7.4.  Last change: 2009 Jun 24
 
 
 		  VIM REFERENCE MANUAL    by Chi-Deok Hwang and Sung-Hyun Nam

runtime/doc/hebrew.txt

@@ -1,4 +1,4 @@
-*hebrew.txt*    For Vim version 7.3.  Last change: 2007 Jun 14
+*hebrew.txt*    For Vim version 7.4.  Last change: 2007 Jun 14
 
 
 	   VIM REFERENCE MANUAL    by Ron Aaron (and Avner Lottem)

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 7.3.  Last change: 2012 Dec 06
+*help.txt*	For Vim version 7.4.  Last change: 2012 Dec 06
 
 			VIM - main help file
 									 k

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 7.3.  Last change: 2012 Nov 28
+*helphelp.txt*	For Vim version 7.4.  Last change: 2012 Nov 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/howto.txt

@@ -1,4 +1,4 @@
-*howto.txt*	For Vim version 7.3.  Last change: 2006 Apr 02
+*howto.txt*	For Vim version 7.4.  Last change: 2006 Apr 02
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar

runtime/doc/if_cscop.txt

@@ -1,4 +1,4 @@
-*if_cscop.txt*  For Vim version 7.3.  Last change: 2011 Jun 12
+*if_cscop.txt*  For Vim version 7.4.  Last change: 2011 Jun 12
 
 
 		  VIM REFERENCE MANUAL    by Andy Kahn

runtime/doc/if_lua.txt

@@ -1,4 +1,4 @@
-*if_lua.txt*    For Vim version 7.3.  Last change: 2012 Jun 29
+*if_lua.txt*    For Vim version 7.4.  Last change: 2013 Sep 04
 
 
 		  VIM REFERENCE MANUAL    by Luis Carvalho
@@ -10,9 +10,10 @@ The Lua Interface to Vim				*lua* *Lua*
 2. The vim module		|lua-vim|
 3. List userdata		|lua-list|
 4. Dict userdata		|lua-dict|
-5. Buffer userdata		|lua-buffer|
-6. Window userdata		|lua-window|
-7. The luaeval function		|lua-luaeval|
+5. Funcref userdata		|lua-funcref|
+6. Buffer userdata		|lua-buffer|
+7. Window userdata		|lua-window|
+8. The luaeval function		|lua-luaeval|
 
 {Vi does not have any of these commands}
 
@@ -110,9 +111,31 @@ input range are stored in "vim.firstline" and "vim.lastline" respectively. The
 module also includes routines for buffer, window, and current line queries,
 Vim evaluation and command execution, and others.
 
-	vim.list()		Returns an empty list (see |List|).
-
-	vim.dict()		Returns an empty dictionary (see |Dictionary|).
+	vim.list([arg])		Returns an empty list or, if "arg" is a Lua
+				table with numeric keys 1, ..., n (a
+				"sequence"), returns a list l such that l[i] =
+				arg[i] for i = 1, ..., n (see |List|).
+				Non-numeric keys are not used to initialize
+				the list. See also |lua-eval| for conversion
+				rules. Example: >
+					:lua t = {math.pi, false, say = 'hi'}
+					:echo luaeval('vim.list(t)')
+					:" [3.141593, 0], 'say' is ignored
+<
+	vim.dict([arg])		Returns an empty dictionary or, if "arg" is a
+				Lua table, returns a dict d such that d[k] =
+				arg[k] for all string keys k in "arg" (see
+				|Dictionary|). Number keys are converted to
+				strings. Keys that are not strings are not
+				used to initialize the dictionary. See also
+				|lua-eval| for conversion rules. Example: >
+					:lua t = {math.pi, false, say = 'hi'}
+					:echo luaeval('vim.dict(t)')
+					:" {'say': 'hi'}, numeric keys ignored
+<
+	vim.funcref({name})	Returns a Funcref to function {name} (see
+				|Funcref|). It is equivalent to Vim's
+				"function". NOT IMPLEMENTED YET
 
 	vim.buffer([arg])	If "arg" is a number, returns buffer with
 				number "arg" in the buffer list or, if "arg"
@@ -131,9 +154,9 @@ Vim evaluation and command execution, and others.
 
 	vim.type({arg})		Returns the type of {arg}. It is equivalent to
 				Lua's "type" function, but returns "list",
-				"dict", "buffer", or "window" if {arg} is a
-				list, dictionary, buffer, or window,
-				respectively. Examples: >
+				"dict", "funcref", "buffer", or "window" if
+				{arg} is a list, dictionary, funcref, buffer,
+				or window, respectively. Examples: >
 					:lua l = vim.list()
 					:lua print(type(l), vim.type(l))
 					:" userdata list
@@ -229,7 +252,40 @@ Examples:
 <
 
 ==============================================================================
-5. Buffer userdata					*lua-buffer*
+5. Funcref userdata					*lua-funcref*
+
+Funcref userdata represent funcref variables in Vim. Funcrefs that were
+defined with a "dict" attribute need to be obtained as a dictionary key
+in order to have "self" properly assigned to the dictionary (see examples
+below.) A funcref "f" has the following properties:
+
+Properties
+----------
+	o "#f" is the name of the function referenced by "f"
+	o "f(...)" calls the function referenced by "f" (with arguments)
+
+Examples:
+>
+	:function I(x)
+	:  return a:x
+	:  endfunction
+	:let R = function('I')
+	:lua i1 = vim.funcref('I')
+	:lua i2 = vim.eval('R')
+	:lua print(#i1, #i2) -- both 'I'
+	:lua print(i1, i2, #i2(i1) == #i1(i2))
+	:function Mylen() dict
+	:  return len(self.data)
+	:  endfunction
+	:let mydict = {'data': [0, 1, 2, 3]}
+	:lua d = vim.eval('mydict'); d.len = vim.funcref('Mylen')
+	:echo mydict.len()
+	:lua l = d.len -- assign d as 'self'
+	:lua print(l())
+<
+
+==============================================================================
+6. Buffer userdata					*lua-buffer*
 
 Buffer userdata represent vim buffers. A buffer userdata "b" has the following
 properties and methods:
@@ -281,7 +337,7 @@ Examples:
 <
 
 ==============================================================================
-6. Window userdata					*lua-window*
+7. Window userdata					*lua-window*
 
 Window objects represent vim windows. A window userdata "w" has the following
 properties and methods:
@@ -313,7 +369,7 @@ Examples:
 <
 
 ==============================================================================
-7. The luaeval function					*lua-luaeval* *lua-eval*
+8. The luaeval function					*lua-luaeval* *lua-eval*
 
 The (dual) equivalent of "vim.eval" for passing Lua values to Vim is
 "luaeval". "luaeval" takes an expression string and an optional argument and
@@ -325,7 +381,13 @@ returns the result of the expression. It is semantically equivalent in Lua to:
 	    return chunk(arg) -- return typval
 	end
 <
-Note that "_A" receives the argument to "luaeval". Examples: >
+Note that "_A" receives the argument to "luaeval". Lua numbers, strings, and
+list, dict, and funcref userdata are converted to their Vim respective types,
+while Lua booleans are converted to numbers. An error is thrown if conversion
+of any of the remaining Lua types, including userdata other than lists, dicts,
+and funcrefs, is attempted.
+
+Examples: >
 
 	:echo luaeval('math.pi')
 	:lua a = vim.list():add('newlist')

runtime/doc/if_mzsch.txt

@@ -1,4 +1,4 @@
-*if_mzsch.txt*  For Vim version 7.3.  Last change: 2012 Dec 17
+*if_mzsch.txt*  For Vim version 7.4.  Last change: 2012 Dec 17
 
 
 		  VIM REFERENCE MANUAL    by Sergey Khorev

runtime/doc/if_ole.txt

@@ -1,4 +1,4 @@
-*if_ole.txt*    For Vim version 7.3.  Last change: 2008 Aug 16
+*if_ole.txt*    For Vim version 7.4.  Last change: 2008 Aug 16
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore

runtime/doc/if_perl.txt

@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 7.3.  Last change: 2012 Oct 25
+*if_perl.txt*   For Vim version 7.4.  Last change: 2013 Oct 05
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 7.3.  Last change: 2013 Jun 02
+*if_pyth.txt*   For Vim version 7.4.  Last change: 2013 Jul 10
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -23,6 +23,7 @@ The Python 2.x interface is available only when Vim was compiled with the
 |+python| feature.
 The Python 3 interface is available only when Vim was compiled with the
 |+python3| feature.
+Both can be available at the same time, but read |python-2-and-3|.
 
 ==============================================================================
 1. Commands						*python-commands*
@@ -180,6 +181,12 @@ vim.strwidth(str)					*python-strwidth*
 	Like |strwidth()|: returns number of display cells str occupies, tab 
 	is counted as one cell.
 
+vim.foreach_rtp(callable)				*python-foreach_rtp*
+	Call the given callable for each path in 'runtimepath' until either 
+	callable returns something but None, the exception is raised or there 
+	are no longer paths. If stopped in case callable returned non-None, 
+	vim.foreach_rtp function returns the value returned by callable.
+
 vim.chdir(*args, **kwargs)				*python-chdir*
 vim.fchdir(*args, **kwargs)				*python-fchdir*
 	Run os.chdir or os.fchdir, then all appropriate vim stuff.
@@ -300,6 +307,88 @@ Output from Python					*python-output*
 	supported, and may cause the program to crash.  This should probably be
 	fixed.
 
+		    *python2-directory* *python3-directory* *pythonx-directory*
+Python 'runtimepath' handling				*python-special-path*
+
+In python vim.VIM_SPECIAL_PATH special directory is used as a replacement for 
+the list of paths found in 'runtimepath': with this directory in sys.path and 
+vim.path_hooks in sys.path_hooks python will try to load module from 
+{rtp}/python2 (or python3) and {rtp}/pythonx (for both python versions) for 
+each {rtp} found in 'runtimepath'.
+
+Implementation is similar to the following, but written in C: >
+
+    from imp import find_module, load_module
+    import vim
+    import sys
+
+    class VimModuleLoader(object):
+        def __init__(self, module):
+            self.module = module
+
+        def load_module(self, fullname, path=None):
+            return self.module
+
+    def _find_module(fullname, oldtail, path):
+        idx = oldtail.find('.')
+        if idx > 0:
+            name = oldtail[:idx]
+            tail = oldtail[idx+1:]
+            fmr = find_module(name, path)
+            module = load_module(fullname[:-len(oldtail)] + name, *fmr)
+            return _find_module(fullname, tail, module.__path__)
+        else:
+            fmr = find_module(fullname, path)
+            return load_module(fullname, *fmr)
+
+    # It uses vim module itself in place of VimPathFinder class: it does not 
+    # matter for python which object has find_module function attached to as 
+    # an attribute.
+    class VimPathFinder(object):
+        @classmethod
+        def find_module(cls, fullname, path=None):
+            try:
+                return VimModuleLoader(_find_module(fullname, fullname, path or vim._get_paths()))
+            except ImportError:
+                return None
+
+        @classmethod
+        def load_module(cls, fullname, path=None):
+            return _find_module(fullname, fullname, path or vim._get_paths())
+
+    def hook(path):
+        if path == vim.VIM_SPECIAL_PATH:
+            return VimPathFinder
+        else:
+            raise ImportError
+
+    sys.path_hooks.append(hook)
+
+vim.VIM_SPECIAL_PATH					*python-VIM_SPECIAL_PATH*
+	String constant used in conjunction with vim path hook. If path hook 
+	installed by vim is requested to handle anything but path equal to 
+	vim.VIM_SPECIAL_PATH constant it raises ImportError. In the only other 
+	case it uses special loader.
+
+	Note: you must not use value of this constant directly, always use 
+	      vim.VIM_SPECIAL_PATH object.
+
+vim.find_module(...)					*python-find_module*
+vim.path_hook(path)					*python-path_hook*
+	Methods or objects used to implement path loading as described above. 
+	You should not be using any of these directly except for vim.path_hook 
+	in case you need to do something with sys.meta_path. It is not 
+	guaranteed that any of the objects will exist in the future vim 
+	versions.
+
+vim._get_paths						*python-_get_paths*
+	Methods returning a list of paths which will be searched for by path 
+	hook. You should not rely on this method being present in future 
+	versions, but can use it for debugging.
+
+	It returns a list of {rtp}/python2 (or {rtp}/python3) and 
+	{rtp}/pythonx directories for each {rtp} in 'runtimepath'.
+
 ==============================================================================
 3. Buffer objects					*python-buffer*
 
@@ -623,7 +712,7 @@ Vim can be built in four ways (:version output):
 3. Python 3 support only    (-python, +python3 or +python3/dyn)
 4. Python 2 and 3 support   (+python/dyn, +python3/dyn)
 
-Some more details on the special case 4:
+Some more details on the special case 4:  *python-2-and-3*
 
 When Python 2 and Python 3 are both supported they must be loaded dynamically.
 
@@ -652,6 +741,11 @@ To work around such problems there are these options:
 3. You undefine PY_NO_RTLD_GLOBAL in auto/config.h after configuration.  This
    may crash Vim though.
 
+							*E880*
+Raising SystemExit exception in python isn't endorsed way to quit vim, use: >
+	:py vim.command("qall!")
+<
+
 							*has-python*
 You can test what Python version is available with: >
 	if has('python')

runtime/doc/if_ruby.txt

@@ -1,4 +1,4 @@
-*if_ruby.txt*   For Vim version 7.3.  Last change: 2012 Aug 02
+*if_ruby.txt*   For Vim version 7.4.  Last change: 2012 Aug 02
 
 
 		  VIM REFERENCE MANUAL    by Shugo Maeda

runtime/doc/if_sniff.txt

@@ -1,4 +1,4 @@
-*if_sniff.txt*	For Vim version 7.3.  Last change: 2005 Mar 29
+*if_sniff.txt*	For Vim version 7.4.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL

runtime/doc/if_tcl.txt

@@ -1,4 +1,4 @@
-*if_tcl.txt*    For Vim version 7.3.  Last change: 2012 Aug 02
+*if_tcl.txt*    For Vim version 7.4.  Last change: 2012 Aug 02
 
 
 		  VIM REFERENCE MANUAL    by Ingo Wilken

runtime/doc/indent.txt

@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 7.3.  Last change: 2013 May 20
+*indent.txt*    For Vim version 7.4.  Last change: 2013 Nov 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -545,10 +545,12 @@ The examples below assume a 'shiftwidth' of 4.
 	      (default 70 lines).
 
 								*cino-#*
-	#N    When N is non-zero recognize shell/Perl comments, starting with
-	      '#'.  Default N is zero: don't recognize '#' comments.  Note
-	      that lines starting with # will still be seen as preprocessor
-	      lines.
+	#N    When N is non-zero recognize shell/Perl comments starting with
+	      '#', do not recognize preprocessor lines; allow right-shifting
+	      lines that start with "#".
+	      When N is zero (default): don't recognize '#' comments, do
+	      recognize preprocessor lines; right-shifting lines that start
+	      with "#" does not work.
 
 
 The defaults, spelled out in full, are:
@@ -556,7 +558,7 @@ The defaults, spelled out in full, are:
 			c3,C0,/0,(2s,us,U0,w0,W0,k0,m0,j0,J0,)20,*70,#0
 
 Vim puts a line in column 1 if:
-- It starts with '#' (preprocessor directives), if 'cinkeys' contains '#'.
+- It starts with '#' (preprocessor directives), if 'cinkeys' contains '#0'.
 - It starts with a label (a keyword followed by ':', other than "case" and
   "default") and 'cinoptions' does not contain an 'L' entry with a positive
   value.
@@ -581,8 +583,8 @@ CLOJURE					*ft-clojure-indent* *clojure-indent*
 
 Clojure indentation differs somewhat from traditional Lisps, due in part to
 the use of square and curly brackets, and otherwise by community convention.
-These conventions are not always universally followed, so the Clojure indent
-script offers a few configurable options, listed below.
+These conventions are not universally followed, so the Clojure indent script
+offers a few configurable options, listed below.
 
 If the current vim does not include searchpairpos(), the indent script falls
 back to normal 'lisp' indenting, and the following options are ignored.
@@ -596,7 +598,6 @@ without limits.
 	" Default
 	let g:clojure_maxlines = 100
 <
-
 						*g:clojure_fuzzy_indent*
 					*g:clojure_fuzzy_indent_patterns*
 					*g:clojure_fuzzy_indent_blacklist*
@@ -650,7 +651,6 @@ default list below.
 	let g:clojure_special_indent_words =
 	   \ 'deftype,defrecord,reify,proxy,extend-type,extend-protocol,letfn'
 <
-
 					*g:clojure_align_multiline_strings*
 
 Align subsequent lines in multiline strings to the column after the opening
@@ -675,7 +675,28 @@ This option is off by default.
 	" Default
 	let g:clojure_align_multiline_strings = 0
 <
+						*g:clojure_align_subforms*
 
+By default, parenthesized compound forms that look like function calls and
+whose head subform is on its own line have subsequent subforms indented by
+two spaces relative to the opening paren:
+>
+	(foo
+	  bar
+	  baz)
+<
+Setting this option changes this behavior so that all subforms are aligned to
+the same column, emulating the default behavior of clojure-mode.el:
+>
+	(foo
+	 bar
+	 baz)
+<
+This option is off by default.
+>
+	" Default
+	let g:clojure_align_subforms = 0
+<
 
 FORTRAN							*ft-fortran-indent*
 
@@ -729,6 +750,50 @@ buffer-local variable as follows >
   let b:fortran_indent_less=1
 
 
+HTML				*ft-html-indent* *html-indent* *html-indenting*
+
+This is about variables you can set in your vimrc to customize HTML indenting.
+
+You can set the indent for the first line after <script> and <style>
+"blocktags" (default "zero"): >
+
+      :let g:html_indent_script1 = "inc"
+      :let g:html_indent_style1 = "inc"
+<
+      VALUE	MEANING ~
+      "zero"	zero indent
+      "auto"	auto indent (same indent as the blocktag)
+      "inc"	auto indent + one indent step
+
+Many tags increase the indent for what follows per default (see "Add Indent
+Tags" in the script).  You can add further tags with: >
+
+      :let g:html_indent_inctags = "html,body,head,tbody"
+
+You can also remove such tags with: >
+
+      :let g:html_indent_autotags = "th,td,tr,tfoot,thead"
+
+Default value is empty for both variables.  Note: the initial "inctags" are
+only defined once per Vim session.
+
+User variables are only read when the script is sourced.  To enable your
+changes during a session, without reloading the HTML file, you can manually
+do: >
+
+      :call HtmlIndent_CheckUserSettings()
+
+Detail:
+  Calculation of indent inside "blocktags" with "alien" content:
+      BLOCKTAG   INDENT EXPR	    WHEN APPLICABLE ~
+      <script> : {customizable}	    if first line of block
+	       : cindent(v:lnum)    if attributes empty or contain "java"
+	       : -1		    else (vbscript, tcl, ...)
+      <style>  : {customizable}	    if first line of block
+	       : GetCSSIndent()	    else
+      <!-- --> : -1
+
+
 PHP				*ft-php-indent* *php-indent* *php-indenting*
 
 NOTE:	PHP files will be indented correctly only if PHP |syntax| is active.

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.3.  Last change: 2013 Jun 06
+*index.txt*     For Vim version 7.4.  Last change: 2014 Mar 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -801,6 +801,10 @@ tag		char	      note action in Normal mode	~
 |zE|		zE		   eliminate all folds
 |zF|		zF		   create a fold for N lines
 |zG|		zG		   mark word as good spelled word
+|zH|		zH		   when 'wrap' off scroll half a screenwidth
+				   to the right
+|zL|		zL		   when 'wrap' off scroll half a screenwidth
+				   to the left
 |zM|		zM		   set 'foldlevel' to zero
 |zN|		zN		   set 'foldenable'
 |zO|		zO		   open folds recursively
@@ -1120,8 +1124,8 @@ tag	      command	      action ~
 |:cNfile|	:cNf[ile]	go to last error in previous file
 |:cabbrev|	:ca[bbrev]	like ":abbreviate" but for Command-line mode
 |:cabclear|	:cabc[lear]	clear all abbreviations for Command-line mode
-|:caddbuffer|	:caddb[uffer]	add errors from buffer
-|:caddexpr|	:cad[dexpr]	add errors from expr
+|:caddbuffer|	:cad[dbuffer]	add errors from buffer
+|:caddexpr|	:cadde[xpr]	add errors from expr
 |:caddfile|	:caddf[ile]	add error message to current quickfix list
 |:call|		:cal[l]		call a function
 |:catch|	:cat[ch]	part of a :try command
@@ -1187,9 +1191,12 @@ tag	      command	      action ~
 |:digraphs|	:dig[raphs]	show or enter digraphs
 |:display|	:di[splay]	display registers
 |:djump|	:dj[ump]	jump to #define
-|:dlist|	:dl[ist]	list #defines
+|:dl|		:dl		short for |:delete| with the 'l' flag
+|:dl|		:del[ete]l	short for |:delete| with the 'l' flag
+|:dlist|	:dli[st]	list #defines
 |:doautocmd|	:do[autocmd]	apply autocommands to current buffer
 |:doautoall|	:doautoa[ll]	apply autocommands for all loaded buffers
+|:dp|		:d[elete]p	short for |:delete| with the 'p' flag
 |:drop|		:dr[op]		jump to window editing file or edit file in
 				current window
 |:dsearch|	:ds[earch]	list one #define
@@ -1268,6 +1275,7 @@ tag	      command	      action ~
 |:keepalt|	:keepa[lt]	following command keeps the alternate file
 |:keepmarks|	:kee[pmarks]	following command keeps marks where they are
 |:keepjumps|	:keepj[umps]	following command keeps jumplist and marks
+|:keeppatterns|	:keepp[atterns]	following command keeps search pattern history
 |:lNext|	:lN[ext]	go to previous entry in location list
 |:lNfile|	:lNf[ile]	go to last entry in previous file
 |:list|		:l[ist]		print lines
@@ -1353,13 +1361,14 @@ tag	      command	      action ~
 |:nmenu|	:nme[nu]	add menu for Normal mode
 |:nnoremap|	:nn[oremap]	like ":noremap" but for Normal mode
 |:nnoremenu|	:nnoreme[nu]	like ":noremenu" but for Normal mode
-|:noautocmd|	:noa[utocmd]	following command don't trigger autocommands
+|:noautocmd|	:noa[utocmd]	following commands don't trigger autocommands
 |:noremap|	:no[remap]	enter a mapping that will not be remapped
 |:nohlsearch|	:noh[lsearch]	suspend 'hlsearch' highlighting
 |:noreabbrev|	:norea[bbrev]	enter an abbreviation that will not be
 				remapped
 |:noremenu|	:noreme[nu]	enter a menu that will not be remapped
 |:normal|	:norm[al]	execute Normal mode commands
+|:noswapfile|	:nos[wapfile]	following commands don't create a swap file
 |:number|	:nu[mber]	print lines with line number
 |:nunmap|	:nun[map]	like ":unmap" but for Normal mode
 |:nunmenu|	:nunme[nu]	remove menu for Normal mode

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.3.  Last change: 2013 Apr 12
+*insert.txt*    For Vim version 7.4.  Last change: 2013 Jul 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -136,6 +136,8 @@ CTRL-R {0-9a-z"%#*+:.-=}					*i_CTRL-R*
 				too.
 				When the result is a Float it's automatically
 				converted to a String.
+				When append() or setline() is invoked the undo
+				sequence will be broken.
 		See |registers| about registers.  {not in Vi}
 
 CTRL-R CTRL-R {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-R*
@@ -1357,7 +1359,7 @@ Complete:
 
 Completion works in separate JavaScript files (&ft==javascript), inside of
 <script> tag of (X)HTML and in values of event attributes (including scanning
-of external files.
+of external files).
 
 DOM compatibility
 
@@ -1468,9 +1470,9 @@ knows how to color highlight.  It can be used for any filetype and provides a
 minimal language-sensitive completion.
 
 To enable syntax code completion you can run: >
-	setlocal omnifunc=syntaxcomplete#Complete
+    setlocal omnifunc=syntaxcomplete#Complete
 
-You can automate this by placing the following in your vimrc (after any
+You can automate this by placing the following in your |.vimrc| (after any
 ":filetype" command): >
     if has("autocmd") && exists("+omnifunc")
 	autocmd Filetype *
@@ -1487,7 +1489,7 @@ customize which syntax groups to include or exclude from the list.  Let's have
 a look at the PHP filetype to see how this works.
 
 If you edit a file called, index.php, run the following command: >
-	:syntax list
+    syntax list
 
 The first thing you will notice is that there are many different syntax groups.
 The PHP language can include elements from different languages like HTML,
@@ -1496,24 +1498,37 @@ that begin with the filetype, "php", in this case.  For example these syntax
 groups are included by default with the PHP: phpEnvVar, phpIntVar,
 phpFunctions.
 
-The PHP language has an enormous number of items which it knows how to syntax
-highlight.  This means these items will be available within the omni
-completion list.  Some people may find this list unwieldy or are only
-interested in certain items.
+If you wish non-filetype syntax items to also be included, you can use a 
+regular expression syntax (added in version 13.0 of autoload\syntaxcomplete.vim)
+to add items.  Looking at the output from ":syntax list" while editing a PHP file 
+I can see some of these entries: >
+    htmlArg,htmlTag,htmlTagName,javaScriptStatement,javaScriptGlobalObjects
 
-There are two ways to prune this list (if necessary).  If you find certain
-syntax groups you do not wish displayed you can add the following to your
-vimrc: >
-	let g:omni_syntax_group_exclude_php = 'phpCoreConstant,phpConstant'
+To pick up any JavaScript and HTML keyword syntax groups while editing a PHP
+file, you can use 3 different regexs, one for each language.  Or you can 
+simply restrict the include groups to a particular value, without using 
+a regex string: >
+    let g:omni_syntax_group_include_php = 'php\w\+,javaScript\w\+,html\w\+'
+    let g:omni_syntax_group_include_php = 'phpFunctions,phpMethods'
+<
+The basic form of this variable is: >
+    let g:omni_syntax_group_include_{filetype} = 'regex,comma,separated'
+
+The PHP language has an enormous number of items which it knows how to syntax
+highlight.  These items will be available within the omni completion list.
+
+Some people may find this list unwieldy or are only interested in certain
+items.  There are two ways to prune this list (if necessary).  If you find
+certain syntax groups you do not wish displayed you can use two different 
+methods to identify these groups.  The first specifically lists the syntax 
+groups by name.  The second uses a regular expression to identify both 
+syntax groups.  Simply add one the following to your vimrc: >
+    let g:omni_syntax_group_exclude_php = 'phpCoreConstant,phpConstant'
+    let g:omni_syntax_group_exclude_php = 'php\w*Constant'
 
 Add as many syntax groups to this list by comma separating them.  The basic
 form of this variable is: >
-	let g:omni_syntax_group_exclude_{filetype} = 'comma,separated,list'
-
-For completeness the opposite is also true.  Creating this variable in your
-vimrc will only include the items in the phpFunctions and phpMethods syntax
-groups: >
-	let g:omni_syntax_group_include_php = 'phpFunctions,phpMethods'
+    let g:omni_syntax_group_exclude_{filetype} = 'regex,comma,separated'
 
 You can create as many of these variables as you need, varying only the
 filetype at the end of the variable name.
@@ -1554,6 +1569,9 @@ To retrieve only the syntax items for the sqlOperator syntax group: >
 To retrieve all syntax items for both the sqlOperator and sqlType groups: >
     echo OmniSyntaxList( ['sqlOperator', 'sqlType'] )
 
+A regular expression can also be used: >
+    echo OmniSyntaxList( ['sql\w\+'] )
+
 From within a plugin, you would typically assign the output to a List: >
     let myKeywords = []
     let myKeywords = OmniSyntaxList( ['sqlKeyword'] )

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 7.3.  Last change: 2012 Sep 05
+*intro.txt*     For Vim version 7.4.  Last change: 2013 Jun 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -261,6 +261,7 @@ Vim would never have become what it is now, without the help of these people!
 I wish to thank all the people that sent me bug reports and suggestions.  The
 list is too long to mention them all here.  Vim would not be the same without
 the ideas from all these people: They keep Vim alive!
+*love* *peace* *friendship* *gross-national-happiness*
 
 
 In this documentation there are several references to other versions of Vi:

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.3.  Last change: 2013 May 05
+*map.txt*       For Vim version 7.4.  Last change: 2013 Aug 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -159,9 +159,9 @@ type "a", then "bar" will get inserted.
 
 1.2 SPECIAL ARGUMENTS					*:map-arguments*
 
-"<buffer>", "<silent>", "<special>", "<script>", "<expr>" and "<unique>" can
-be used in any order.  They must appear right after the command, before any
-other arguments.
+"<buffer>", "<nowait>", "<silent>", "<special>", "<script>", "<expr>" and
+"<unique>" can be used in any order.  They must appear right after the
+command, before any other arguments.
 
 				*:map-local* *:map-<buffer>* *E224* *E225*
 If the first argument to one of these commands is "<buffer>" the mapping will
@@ -169,12 +169,23 @@ be effective in the current buffer only.  Example: >
 	:map <buffer>  ,w  /[.,;]<CR>
 Then you can map ",w" to something else in another buffer: >
 	:map <buffer>  ,w  /[#&!]<CR>
-The local buffer mappings are used before the global ones.
+The local buffer mappings are used before the global ones.  See <nowait> below
+to make a short local mapping not taking effect when a longer global one
+exists.
 The "<buffer>" argument can also be used to clear mappings: >
 	:unmap <buffer> ,w
 	:mapclear <buffer>
 Local mappings are also cleared when a buffer is deleted, but not when it is
 unloaded.  Just like local option values.
+Also see |map-precedence|.
+
+						*:map-<nowait>* *:map-nowait*
+When defining a buffer-local mapping for "," there may be a global mapping
+that starts with ",".  Then you need to type another character for Vim to know
+whether to use the "," mapping or the longer one.  To avoid this add the
+<nowait> argument.  Then the mapping will be used when it matches, Vim does
+not wait for more characters to be typed.  However, if the characters were
+already type they are used.
 
 						*:map-<silent>* *:map-silent*
 To define a mapping which will not be echoed on the command line, add
@@ -369,11 +380,12 @@ it's just used here for this situation.
    The simplest way to load a set of related language mappings is by using the
 'keymap' option.  See |45.5|.
    In Insert mode and in Command-line mode the mappings can be disabled with
-the CTRL-^ command |i_CTRL-^| |c_CTRL-^|.  When starting to enter a normal
-command line (not a search pattern) the mappings are disabled until a CTRL-^
-is typed.  The state last used is remembered for Insert mode and Search
-patterns separately.  The state for Insert mode is also used when typing a
-character as an argument to command like "f" or "t".
+the CTRL-^ command |i_CTRL-^| |c_CTRL-^|. These commands change the value of
+the 'iminsert' option.  When starting to enter a normal command line (not a
+search pattern) the mappings are disabled until a CTRL-^ is typed.  The state
+last used is remembered for Insert mode and Search patterns separately.  The
+state for Insert mode is also used when typing a character as an argument to
+command like "f" or "t".
    Language mappings will never be applied to already mapped characters.  They
 are only used for typed characters.  This assumes that the language mapping
 was already done when typing the mapping.
@@ -581,12 +593,12 @@ illogical when compared to other commands.
 When you have a mapping that contains an Ex command, you need to put a line
 terminator after it to have it executed.  The use of <CR> is recommended for
 this (see |<>|).  Example: >
-   :map  _ls  :!ls -l %<CR>:echo "the end"<CR>
+   :map  _ls  :!ls -l %:S<CR>:echo "the end"<CR>
 
 To avoid mapping of the characters you type in insert or Command-line mode,
 type a CTRL-V first.  The mapping in Insert mode is disabled if the 'paste'
 option is on.
-
+							*map-error*
 Note that when an error is encountered (that causes an error message or beep)
 the rest of the mapping is not executed.  This is Vi-compatible.
 
@@ -654,6 +666,17 @@ option).  After that it assumes that the 'q' is to be interpreted as such.  If
 you type slowly, or your system is slow, reset the 'timeout' option.  Then you
 might want to set the 'ttimeout' option.
 
+                            				*map-precedence*
+Buffer-local mappings (defined using |:map-<buffer>|) take precedence over
+global mappings.  When a buffer-local mapping is the same as a global mapping,
+Vim will use the buffer-local mapping.  In addition, Vim will use a complete
+mapping immediately if it was defined with <nowait>, even if a longer mapping
+has the same prefix.  For example, given the following two mappings: >
+    :map <buffer> <nowait> \a   :echo "Local \a"<CR>
+    :map                   \abc :echo "Global \abc"<CR>
+When typing \a the buffer-local mapping will be used immediately.  Vim will
+not wait for more characters to see if the user might be typing \abc.
+
 							*map-keys-fails*
 There are situations where key codes might not be recognized:
 - Vim can only read part of the key code.  Mostly this is only the first
@@ -1336,6 +1359,8 @@ There are some special cases as well:
 In the cases of the -count and -register attributes, if the optional argument
 is supplied, it is removed from the argument list and is available to the
 replacement text separately.
+Note that these arguments can be abbreviated, but that is a deprecated
+feature.  Use the full name for new scripts.
 
 Replacement text
 

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 7.3.  Last change: 2013 May 18
+*mbyte.txt*     For Vim version 7.4.  Last change: 2013 May 18
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 7.3.  Last change: 2013 Feb 23
+*message.txt*   For Vim version 7.4.  Last change: 2013 Feb 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/mlang.txt

@@ -1,4 +1,4 @@
-*mlang.txt*     For Vim version 7.3.  Last change: 2012 Jan 15
+*mlang.txt*     For Vim version 7.4.  Last change: 2012 Jan 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 7.3.  Last change: 2013 Mar 07
+*motion.txt*    For Vim version 7.4.  Last change: 2014 Feb 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -236,6 +236,8 @@ g$ or g<End>		When lines wrap ('wrap' on): To the last character of
 			the line is not on the screen or when a count is used.
 			Additionally, vertical movements keep the column,
 			instead of going to the end of the line.
+			When 'virtualedit' is enabled moves to the end of the
+			screen line.
 			{not in Vi}
 
 							*bar*
@@ -341,7 +343,7 @@ gg			Goto line [count], default first line, on the first
 			See also 'startofline' option.  {not in Vi}
 
 :[range]go[to] [count]					*:go* *:goto* *go*
-[count]go		Go to {count} byte in the buffer.  Default [count] is
+[count]go		Go to [count] byte in the buffer.  Default [count] is
 			one, start of the file.  When giving [range], the
 			last number in it used as the byte count.  End-of-line
 			characters are counted depending on the current
@@ -1083,7 +1085,8 @@ only once.
 
 When the |:keepjumps| command modifier is used, jumps are not stored in the
 jumplist.  Jumps are also not stored in other cases, e.g., in a |:global|
-command.  You can explicitly add a jump by setting the ' mark.
+command.  You can explicitly add a jump by setting the ' mark with "m'".  Note
+that calling setpos() does not do this.
 
 After the CTRL-O command that got you into line 1154 you could give another
 jump command (e.g., "G").  The jump list would then become:

runtime/doc/netbeans.txt

@@ -1,4 +1,4 @@
-*netbeans.txt*  For Vim version 7.3.  Last change: 2012 Jan 26
+*netbeans.txt*  For Vim version 7.4.  Last change: 2012 Jan 26
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur et al.

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.3.  Last change: 2013 Jun 04
+*options.txt*	For Vim version 7.4.  Last change: 2014 Mar 23
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -482,39 +482,42 @@ to set options automatically for one or more files:
 There are two forms of modelines.  The first form:
 	[text]{white}{vi:|vim:|ex:}[white]{options}
 
-[text]		any text or empty
-{white}		at least one blank character (<Space> or <Tab>)
-{vi:|vim:|ex:}	the string "vi:", "vim:" or "ex:"
-[white]		optional white space
-{options}	a list of option settings, separated with white space or ':',
-		where each part between ':' is the argument for a ":set"
-		command (can be empty)
+[text]			any text or empty
+{white}			at least one blank character (<Space> or <Tab>)
+{vi:|vim:|ex:}		the string "vi:", "vim:" or "ex:"
+[white]			optional white space
+{options}		a list of option settings, separated with white space
+			or ':', where each part between ':' is the argument
+			for a ":set" command (can be empty)
 
-Example:
+Examples:
    vi:noai:sw=3 ts=6 ~
+   vim: tw=77 ~
 
 The second form (this is compatible with some versions of Vi):
 
-	[text]{white}{vi:|vim:|ex:}[white]se[t] {options}:[text]
+	[text]{white}{vi:|vim:|Vim:|ex:}[white]se[t] {options}:[text]
 
-[text]		any text or empty
-{white}		at least one blank character (<Space> or <Tab>)
-{vi:|vim:|ex:}	the string "vi:", "vim:" or "ex:"
-[white]		optional white space
-se[t]		the string "set " or "se " (note the space)
-{options}	a list of options, separated with white space, which is the
-		argument for a ":set" command
-:		a colon
-[text]		any text or empty
+[text]			any text or empty
+{white}			at least one blank character (<Space> or <Tab>)
+{vi:|vim:|Vim:|ex:}	the string "vi:", "vim:", "Vim:" or "ex:"
+[white]			optional white space
+se[t]			the string "set " or "se " (note the space); When
+			"Vim" is used it must be "set".
+{options}		a list of options, separated with white space, which
+			is the argument for a ":set" command
+:			a colon
+[text]			any text or empty
 
-Example:
+Examples:
    /* vim: set ai tw=75: */ ~
+   /* Vim: set ai tw=75: */ ~
 
-The white space before {vi:|vim:|ex:} is required.  This minimizes the chance
-that a normal word like "lex:" is caught.  There is one exception: "vi:" and
-"vim:" can also be at the start of the line (for compatibility with version
-3.0).  Using "ex:" at the start of the line will be ignored (this could be
-short for "example:").
+The white space before {vi:|vim:|Vim:|ex:} is required.  This minimizes the
+chance that a normal word like "lex:" is caught.  There is one exception:
+"vi:" and "vim:" can also be at the start of the line (for compatibility with
+version 3.0).  Using "ex:" at the start of the line will be ignored (this
+could be short for "example:").
 
 							*modeline-local*
 The options are set like with ":setlocal": The new value only applies to the
@@ -530,7 +533,7 @@ in another window.  But window-local options will be set.
 
 							*modeline-version*
 If the modeline is only to be used for some versions of Vim, the version
-number can be specified where "vim:" is used:
+number can be specified where "vim:" or "Vim:" is used:
 	vim{vers}:	version {vers} or later
 	vim<{vers}:	version before {vers}
 	vim={vers}:	version {vers}
@@ -984,7 +987,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'backupdir'* *'bdir'*
 'backupdir' 'bdir'	string	(default for Amiga: ".,t:",
-				 for MS-DOS and Win32: ".,c:/tmp,c:/temp"
+				 for MS-DOS and Win32: ".,$TEMP,c:/tmp,c:/temp"
 				 for Unix: ".,~/tmp,~/")
 			global
 			{not in Vi}
@@ -1881,8 +1884,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 			{not in Vi}
 	A sequence of single character flags.  When a character is present
-	this indicates vi-compatible behavior.  This is used for things where
-	not being vi-compatible is mostly or sometimes preferred.
+	this indicates Vi-compatible behavior.  This is used for things where
+	not being Vi-compatible is mostly or sometimes preferred.
 	'cpoptions' stands for "compatible-options".
 	Commas can be added for readability.
 	To avoid problems with flags that are added in the future, use the
@@ -2243,7 +2246,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Specifies whether to use quickfix window to show cscope results.
 	See |cscopequickfix|.
 
-						*'cscoperelative'* *'csre'*
+		*'cscoperelative'* *'csre'* *'nocscoperelative'* *'nocsre'*
 'cscoperelative' 'csre' boolean (default off)
 			global
 			{not available when compiled without the |+cscope|
@@ -2474,7 +2477,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'directory'* *'dir'*
 'directory' 'dir'	string	(default for Amiga: ".,t:",
-				 for MS-DOS and Win32: ".,c:\tmp,c:\temp"
+				 for MS-DOS and Win32: ".,$TEMP,c:\tmp,c:\temp"
 				 for Unix: ".,~/tmp,/var/tmp,/tmp")
 			global
 	List of directory names for the swap file, separated with commas.
@@ -3993,6 +3996,26 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Can be overruled by using "\c" or "\C" in the pattern, see
 	|/ignorecase|.
 
+						*'imactivatefunc'* *'imaf'*
+'imactivatefunc' 'imaf'	string (default "")
+			global
+			{not in Vi}
+			{only available when compiled with |+xim| and
+			|+GUI_GTK|}
+	This option specifies a function that will be called to
+	activate/inactivate Input Method.
+
+	Example: >
+		function ImActivateFunc(active)
+		  if a:active
+		    ... do something
+		  else
+		    ... do something
+		  endif
+		  " return value is not used
+		endfunction
+		set imactivatefunc=ImActivateFunc
+<
 						*'imactivatekey'* *'imak'*
 'imactivatekey' 'imak'	string (default "")
 			global
@@ -4089,6 +4112,24 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The value 0 may not work correctly with Athena and Motif with some XIM
 	methods.  Use 'imdisable' to disable XIM then.
 
+						*'imstatusfunc'* *'imsf'*
+'imstatusfunc' 'imsf'	string (default "")
+			global
+			{not in Vi}
+			{only available when compiled with |+xim| and
+			|+GUI_GTK|}
+	This option specifies a function that is called to obtain the status
+	of Input Method.  It must return a positive number when IME is active.
+
+	Example: >
+		function ImStatusFunc()
+		  let is_active = ...do something
+		  return is_active ? 1 : 0
+		endfunction
+		set imstatusfunc=ImStatusFunc
+<
+	NOTE: This function is invoked very often.  Keep it fast.
+
 						*'include'* *'inc'*
 'include' 'inc'		string	(default "^\s*#\s*include")
 			global or local to buffer |global-local|
@@ -4588,7 +4629,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'lispwords'* *'lw'*
 'lispwords' 'lw'	string	(default is very long)
-			global
+			global or local to buffer |global-local|
 			{not in Vi}
 			{not available when compiled without the |+lispindent|
 			feature}
@@ -4605,7 +4646,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The cursor is displayed at the start of the space a Tab character
 	occupies, not at the end as usual in Normal mode.  To get this cursor
 	position while displaying Tabs with spaces, use: >
-		:set list lcs=tab\ \ 
+		:set list lcs=tab:\ \ 
 <
 	Note that list mode will also affect formatting (set with 'textwidth'
 	or 'wrapmargin') when 'cpoptions' includes 'L'.  See 'listchars' for
@@ -4716,8 +4757,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global or local to buffer |global-local|
 			{not in Vi}
 	Program to use for the ":make" command.  See |:make_makeprg|.
-	This option may contain '%' and '#' characters, which are expanded to
-	the current and alternate file name. |:_%| |:_#|
+	This option may contain '%' and '#' characters (see  |:_%| and |:_#|), 
+	which are expanded to the current and alternate file name.  Use |::S| 
+	to escape file names in case they contain special characters.
 	Environment variables are expanded |:set_env|.  See |option-backslash|
 	about including spaces and backslashes.
 	Note that a '|' must be escaped twice: once for ":set" and once for
@@ -6514,6 +6556,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	region by listing them: "en_us,en_ca" supports both US and Canadian
 	English, but not words specific for Australia, New Zealand or Great
 	Britain.
+	If the name "cjk" is included East Asian characters are excluded from
+	spell checking.  This is useful when editing text that also has Asian
+	words.
 							*E757*
 	As a special case the name of a .spl file can be given as-is.  The
 	first "_xx" in the name is removed and used as the region name
@@ -6713,7 +6758,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	V N   Virtual column number as -{num}.  Not displayed if equal to 'c'.
 	p N   Percentage through file in lines as in |CTRL-G|.
 	P S   Percentage through file of displayed window.  This is like the
-	      percentage described for 'ruler'.  Always 3 in length.
+	      percentage described for 'ruler'.  Always 3 in length, unless
+	      translated.
 	a S   Argument list status as in default title.  ({current} of {max})
 	      Empty if the argument file count is zero or one.
 	{ NF  Evaluate expression between '%{' and '}' and substitute result.
@@ -6836,6 +6882,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	immediately deleted.  When 'swapfile' is set, and 'updatecount' is
 	non-zero, a swap file is immediately created.
 	Also see |swap-file| and |'swapsync'|.
+	If you want to open a new buffer without creating a swap file for it,
+	use the |:noswapfile| modifier.
 
 	This option is used together with 'bufhidden' and 'buftype' to
 	specify special kinds of buffers.   See |special-buffers|.
@@ -7552,7 +7600,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'undolevels'* *'ul'*
 'undolevels' 'ul'	number	(default 100, 1000 for Unix, VMS,
 						Win32 and OS/2)
-			global
+			global or local to buffer |global-local|
 			{not in Vi}
 	Maximum number of changes that can be undone.  Since undo information
 	is kept in memory, higher numbers will cause more memory to be used
@@ -7563,8 +7611,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	But you can also get Vi compatibility by including the 'u' flag in
 	'cpoptions', and still be able to use CTRL-R to repeat undo.
 	Also see |undo-two-ways|.
-	Set to a negative number for no undo at all: >
-		set ul=-1
+	Set to -1 for no undo at all.  You might want to do this only for the
+	current buffer: >
+		setlocal ul=-1
 <	This helps when you run out of memory for a single change.
 	Also see |clear-undo|.
 
@@ -7821,8 +7870,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	if the line was empty.  But it is far from Vi compatible.  It may also
 	break some plugins or Vim scripts.  For example because |l| can move
 	the cursor after the last character.  Use with care!
-	Using the |$| command will move to the last character in the line, not
+	Using the `$` command will move to the last character in the line, not
 	past it.  This may actually move the cursor to the left!
+	The `g$` command will move to the end of the screen line.
 	It doesn't make sense to combine "all" with "onemore", but you will
 	not get a warning for it.
 

runtime/doc/os_390.txt

@@ -1,4 +1,4 @@
-*os_390.txt*    For Vim version 7.3.  Last change: 2010 May 30
+*os_390.txt*    For Vim version 7.4.  Last change: 2010 May 30
 
 
 		  VIM REFERENCE MANUAL	  by Ralf Schandl

runtime/doc/os_amiga.txt

@@ -1,4 +1,4 @@
-*os_amiga.txt*  For Vim version 7.3.  Last change: 2010 Aug 14
+*os_amiga.txt*  For Vim version 7.4.  Last change: 2010 Aug 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_beos.txt

@@ -1,4 +1,4 @@
-*os_beos.txt*	For Vim version 7.3.  Last change: 2010 Aug 14
+*os_beos.txt*	For Vim version 7.4.  Last change: 2010 Aug 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_dos.txt

@@ -1,4 +1,4 @@
-*os_dos.txt*    For Vim version 7.3.  Last change: 2006 Mar 30
+*os_dos.txt*    For Vim version 7.4.  Last change: 2006 Mar 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_mac.txt

@@ -1,4 +1,4 @@
-*os_mac.txt*    For Vim version 7.3.  Last change: 2006 Apr 30
+*os_mac.txt*    For Vim version 7.4.  Last change: 2006 Apr 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar et al.

runtime/doc/os_mint.txt

@@ -1,4 +1,4 @@
-*os_mint.txt*   For Vim version 7.3.  Last change: 2005 Mar 29
+*os_mint.txt*   For Vim version 7.4.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Jens M. Felderhoff