updated for version 7.4b.002

Problem:    Crash searching for \%(\%(\|\d\|-\|\.\)*\|\*\). (Marcin
            Szamotulski)  Also for \(\)*.
Solution:   Do add a state for opening parenthesis, so that we can check if it
            was added before at the same position.

.gitignore

@@ -36,6 +36,9 @@ src/Obj*/pathdef.c
 gvimext.dll
 gvimext.lib
 
+# Mac OSX
+src/xxd/xxd.dSYM
+
 # All platforms
 *.rej
 *.orig

Contents

@@ -9,10 +9,10 @@ Vim		Vi IMproved.  A clone of the UNIX text editor Vi.  Very useful
 		messages, shows current file name in window title, on-line
 		help, rectangular cut/paste, etc., etc., etc...
 
-		Version 7.3.  Also runs under UNIX, MSDOS and other systems.
-		vim73rt.tgz  contains the documentation and syntax files.
-		vim73bin.tgz contains the binaries.
-		vim73src.tgz contains the sources.
+		Version 7.4b.  Also runs under UNIX, MSDOS and other systems.
+		vim74brt.tgz  contains the documentation and syntax files.
+		vim74bbin.tgz contains the binaries.
+		vim74bsrc.tgz contains the sources.
 		Author: Bram Moolenaar et al.
 
 

Filelist

@@ -87,6 +87,10 @@ SRC_ALL =	\
 		src/testdir/python2/*.py \
 		src/testdir/python3/*.py \
 		src/testdir/pythonx/*.py \
+		src/testdir/pythonx/topmodule/__init__.py \
+		src/testdir/pythonx/topmodule/submodule/__init__.py \
+		src/testdir/pythonx/topmodule/submodule/subsubmodule/__init__.py \
+		src/testdir/pythonx/topmodule/submodule/subsubmodule/subsubsubmodule.py \
 		src/testdir/python_after/*.py \
 		src/testdir/python_before/*.py \
 		src/proto.h \
@@ -690,6 +694,7 @@ LANG_GEN = \
 		runtime/doc/*-fr.UTF-8.1 \
 		runtime/doc/*-it.1 \
 		runtime/doc/*-it.UTF-8.1 \
+		runtime/doc/*-ja.UTF-8.1 \
 		runtime/doc/*-pl.1 \
 		runtime/doc/*-pl.UTF-8.1 \
 		runtime/doc/*-ru.1 \

Makefile

@@ -74,14 +74,17 @@ all install uninstall tools config configure reconfig proto depend lint tags typ
 #    Before creating an archive first delete all backup files, *.orig, etc.
 
 MAJOR = 7
-MINOR = 3
+MINOR = 4b
 
 # Uncomment this line if the Win32s version is to be included.
-DOSBIN_S =  dosbin_s
+# DOSBIN_S =  dosbin_s
 
 # Uncomment this line if the 16 bit DOS version is to be included.
 # DOSBIN_D16 = dosbin_d16
 
+# Uncomment this line if the 32 bit DOS version is to be included.
+# DOSBIN_D32 = dosbin_d32
+
 # CHECKLIST for creating a new version:
 #
 # - Update Vim version number.  For a test version in: src/version.h, Contents,
@@ -128,36 +131,20 @@ DOSBIN_S =  dosbin_s
 # PC:
 # - Run make on Unix to update the ".mo" files.
 # - "make dossrc" and "make dosrt".  Unpack the archives on a PC.
-# 16 bit DOS version: (OBSOLETE, 16 bit version doesn't build)
-# - Set environment for compiling with Borland C++ 3.1.
-# - "bmake -f Make_bc3.mak BOR=E:\borlandc" (compiling xxd might fail, in that
-#   case set environment for compiling with Borland C++ 4.0 and do
-#   "make -f make_bc3.mak BOR=E:\BC4 xxd/xxd.exe").
-#   NOTE: this currently fails because Vim is too big.
-# - "make test" and check the output.
-# - Rename the executables to "vimd16.exe", "xxdd16.exe", "installd16.exe" and
-#   "uninstald16.exe".
-# 32 bit DOS version:
-# - Set environment for compiling with DJGPP; "gmake -f Make_djg.mak".
-# - "rm testdir/*.out", "gmake -f Make_djg.mak test" and check the output for
-#   "ALL DONE".
-# - Rename the executables to "vimd32.exe", "xxdd32.exe", "installd32.exe" and
-#   "uninstald32.exe".
 # Win32 console version:
-# - Set environment for Visual C++ 2008, e.g.:
-#   "E:\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat".  Or, when using the
-#   Visual C++ Toolkit 2003: "msvcsetup.bat" (adjust the paths when necessary).
-#   For Windows 98/ME the 2003 version is required, but then it won't work on
-#   Windows 7 and 64 bit.
-# - "nmake -f Make_mvc.mak"
+# - Set environment for Visual C++ 2008, e.g.: "msvc2008.bat"  Or:
+#   "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat".
+#   Or, when using the Visual C++ Toolkit 2003: "msvcsetup.bat" (adjust the
+#   paths when necessary).
+#   For Windows 98/ME the 2003 version is required, but then the executable
+#   won't work on Windows 7 and 64 bit systems.
+# - "nmake -f Make_mvc.mak"  (use the same path as for vcvars32.bat)
 # - "rm testdir/*.out", "nmake -f Make_mvc.mak test" and check the output.
-# - Rename the executables to "vimw32.exe", "xxdw32.exe".
+# - Rename vim.exe to vimw32.exe, xxd/xxd.exe to xxdw32.exe.
 # - Rename vim.pdb to vimw32.pdb.
-# - When building the Win32s version later, delete vimrun.exe, install.exe and
-#   uninstal.exe.  Otherwise rename executables to installw32.exe and
-#   uninstalw32.exe.
+# - Rename install.exe to installw32.exe and uninstal.exe to uninstalw32.exe.
 # Win32 GUI version:
-# - "nmake -f Make_mvc.mak GUI=yes.
+# - "nmake -f Make_mvc.mak GUI=yes"
 # - move "gvim.exe" to here (otherwise the OLE version will overwrite it).
 # - Move gvim.pdb to here.
 # - Delete vimrun.exe, install.exe and uninstal.exe.
@@ -167,23 +154,13 @@ DOSBIN_S =  dosbin_s
 # - Rename "gvim.exe" to "gvim_ole.exe".
 # - Rename gvim.pdb to "gvim_ole.pdb".
 # - Delete install.exe and uninstal.exe.
-# - If building the Win32s version delete vimrun.exe.
-# Win32s GUI version:
-# - Set environment for Visual C++ 4.1 (requires a new console window):
-#   "vcvars32.bat" (use the path for VC 4.1 e:\msdev\bin)
-# - "nmake -f Make_mvc.mak GUI=yes INTL=no clean" (use the path for VC 4.1)
-# - "nmake -f Make_mvc.mak GUI=yes INTL=no" (use the path for VC 4.1)
-# - Rename "gvim.exe" to "gvim_w32s.exe".
-# - Rename "install.exe" to "installw32.exe"
-# - Rename "uninstal.exe" to "uninstalw32.exe"
-# - The produced uninstalw32.exe and vimrun.exe are used.
 # Create the archives:
 # - Copy all the "*.exe" files to where this Makefile is.
 # - Copy all the "*.pdb" files to where this Makefile is.
 # - "make dosbin".
 # NSIS self installing exe:
 # - To get NSIS see http://nsis.sourceforge.net
-# - Make sure gvim_ole.exe, vimd32.exe, vimw32.exe, installw32.exe,
+# - Make sure gvim_ole.exe, vimw32.exe, installw32.exe,
 #   uninstalw32.exe and xxdw32.exe have been build as mentioned above.
 # - copy these files (get them from a binary archive or build them):
 #	gvimext.dll in src/GvimExt
@@ -196,7 +173,44 @@ DOSBIN_S =  dosbin_s
 # - go to ../nsis and do "makensis gvim.nsi" (takes a few minutes).
 # - Copy gvim##.exe to the dist directory.
 #
-# OS/2: (OBSOLETE, OS/2 version is no longer distributed)
+# 64 bit builds (these are not in the normal distribution, the 32 bit build
+# works just fine on 64 bit systems).
+# Like the console and GUI version, but first run vcvars64.bat or
+#   "..\VC\vcvarsall.bat x86_amd64".
+# - "nmake -f Make_mvc.mak"
+# - "nmake -f Make_mvc.mak GUI=yes"
+# Or run src/bigvim64.bat for an OLE version.
+#
+# OBSOLETE systems: You can build this if you have an appropriate system.
+#
+# 16 bit DOS version: (doesn't build anywhere)
+# - Set environment for compiling with Borland C++ 3.1.
+# - "bmake -f Make_bc3.mak BOR=E:\borlandc" (compiling xxd might fail, in that
+#   case set environment for compiling with Borland C++ 4.0 and do
+#   "make -f make_bc3.mak BOR=E:\BC4 xxd/xxd.exe").
+#   NOTE: this currently fails because Vim is too big.
+# - "make test" and check the output.
+# - Rename the executables to "vimd16.exe", "xxdd16.exe", "installd16.exe" and
+#   "uninstald16.exe".
+#
+# 32 bit DOS version: (requires Windows XP or earlier)
+# - Set environment for compiling with DJGPP; "gmake -f Make_djg.mak".
+# - "rm testdir/*.out", "gmake -f Make_djg.mak test" and check the output for
+#   "ALL DONE".
+# - Rename the executables to "vimd32.exe", "xxdd32.exe", "installd32.exe" and
+#   "uninstald32.exe".
+#
+# Win32s GUI version: (requires very old compiler)
+# - Set environment for Visual C++ 4.1 (requires a new console window):
+#   "vcvars32.bat" (use the path for VC 4.1 e:\msdev\bin)
+# - "nmake -f Make_mvc.mak GUI=yes INTL=no clean" (use the path for VC 4.1)
+# - "nmake -f Make_mvc.mak GUI=yes INTL=no" (use the path for VC 4.1)
+# - Rename "gvim.exe" to "gvim_w32s.exe".
+# - Rename "install.exe" to "installw32.exe"
+# - Rename "uninstal.exe" to "uninstalw32.exe"
+# - The produced uninstalw32.exe and vimrun.exe are used.
+#
+# OS/2: (requires an OS/2 system)
 # - Unpack the Unix archive.
 # - "make -f Make_os2.mak".
 # - Rename the executables to vimos2.exe, xxdos2.exe and teeos2.exe and copy
@@ -295,6 +309,8 @@ unixall: dist prepare
 		$(LANG_SRC) \
 		| (cd dist/$(VIMRTDIR); tar xf -)
 # Need to use a "distclean" config.mk file
+# Note: this file is not included in the repository to avoid problems, but it's
+# OK to put it in the archive.
 	cp -f src/config.mk.dist dist/$(VIMRTDIR)/src/auto/config.mk
 # Create an empty config.h file, make dependencies require it
 	touch dist/$(VIMRTDIR)/src/auto/config.h
@@ -450,7 +466,7 @@ runtime_unix2dos: dosrt_unix2dos
 	cd dist/vim/$(VIMRTDIR); tar cf - * \
 		| (cd ../../../runtime/dos; tar xf -)
 
-dosbin: prepare dosbin_gvim dosbin_w32 dosbin_d32 dosbin_ole $(DOSBIN_S) $(DOSBIN_D16)
+dosbin: prepare dosbin_gvim dosbin_w32 $(DOSBIN_D32) dosbin_ole $(DOSBIN_S) $(DOSBIN_D16)
 
 # make Win32 gvim
 dosbin_gvim: dist no_title.vim dist/$(COMMENT_GVIM)

README.txt

@@ -1,4 +1,4 @@
-README.txt for version 7.3 of Vim: Vi IMproved.
+README.txt for version 7.4b of Vim: Vi IMproved.
 
 
 WHAT IS VIM

README_ami.txt

@@ -1,4 +1,4 @@
-README_ami.txt for version 7.3 of Vim: Vi IMproved.
+README_ami.txt for version 7.4b of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Amiga systems.
 See README.txt for general information about Vim.

README_amibin.txt

@@ -1,4 +1,4 @@
-README_amibin.txt for version 7.3 of Vim: Vi IMproved.
+README_amibin.txt for version 7.4b of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_ami.txt" for installation instructions for the Amiga.

README_amisrc.txt

@@ -1,4 +1,4 @@
-README_amisrc.txt for version 7.3 of Vim: Vi IMproved.
+README_amisrc.txt for version 7.4b of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_ami.txt" for installation instructions for the Amiga.

README_bindos.txt

@@ -1,19 +1,16 @@
-README_bindos.txt for version 7.3 of Vim: Vi IMproved.
+README_bindos.txt for version 7.4b of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim73rt.zip).
+These files are in the runtime archive (vim74rt.zip).
 
 
 There are several binary distributions of Vim for the PC.  You would normally
 pick only one of them, but it's also possible to install several.
 These ones are available (the version number may differ):
-	vim73d16.zip	16 bit DOS version
-	vim73d32.zip	32 bit DOS version
-	vim73w32.zip	Windows 95/98/NT/etc. console version
-	gvim73.zip	Windows 95/98/NT/etc. GUI version
-	gvim73ole.zip	Windows 95/98/NT/etc. GUI version with OLE
-	gvim73_s.zip	Windows 3.1 GUI version
+	vim74w32.zip	Windows 95/98/NT/etc. console version
+	gvim74.zip	Windows 95/98/NT/etc. GUI version
+	gvim74ole.zip	Windows 95/98/NT/etc. GUI version with OLE
 
-You MUST also get the runtime archive (vim73rt.zip).
-The sources are also available (vim73src.zip).
+You MUST also get the runtime archive (vim74rt.zip).
+The sources are also available (vim74src.zip).

README_dos.txt

@@ -1,4 +1,4 @@
-README_dos.txt for version 7.3 of Vim: Vi IMproved.
+README_dos.txt for version 7.4b of Vim: Vi IMproved.
 
 This file explains the installation of Vim on MS-DOS and MS-Windows systems.
 See "README.txt" for general information about Vim.
@@ -47,13 +47,13 @@ These are the normal steps to install Vim from the .zip archives:
    Binary and runtime Vim archives are normally unpacked in the same location,
    on top of each other.
 
-2. Unpack the zip archives.  This will create a new directory "vim\vim73",
+2. Unpack the zip archives.  This will create a new directory "vim\vim74",
    in which all the distributed Vim files are placed.  Since the directory
    name includes the version number, it is unlikely that you overwrite
    existing files.
    Examples:
-	pkunzip -d gvim73.zip
-	unzip vim73w32.zip
+	pkunzip -d gvim74.zip
+	unzip vim74w32.zip
 
    You need to unpack the runtime archive and at least one of the binary
    archives.  When using more than one binary version, be careful not to
@@ -69,7 +69,7 @@ These are the normal steps to install Vim from the .zip archives:
    archive and follow the instructions in the documentation.
 
 3. Change to the new directory:
-	cd vim\vim73
+	cd vim\vim74
    Run the "install.exe" program.  It will ask you a number of questions about
    how you would like to have your Vim setup.  Among these are:
    - You can tell it to write a "_vimrc" file with your preferences in the
@@ -80,8 +80,8 @@ These are the normal steps to install Vim from the .zip archives:
      console or in a shell.  You can select one of the directories in your
      $PATH.  If you skip this, you can add Vim to the search path manually:
      The simplest is to add a line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim73
-	set path=%path%;D:\editors\vim\vim73
+	set path=%path%;C:\vim\vim74
+	set path=%path%;D:\editors\vim\vim74
    - Create entries for Vim on the desktop and in the Start menu.
 
 That's it!
@@ -93,8 +93,8 @@ Remarks:
   won't show a menubar.  Then you need to set the $VIM environment variable to
   point to the top directory of your Vim files.  Example:
     set VIM=C:\editors\vim
-  Vim version 7.3 will look for your vimrc file in $VIM, and for the runtime
-  files in $VIM/vim73.  See ":help $VIM" for more information.
+  Vim version 7.4 will look for your vimrc file in $VIM, and for the runtime
+  files in $VIM/vim74.  See ":help $VIM" for more information.
 
 - To avoid confusion between distributed files of different versions and your
   own modified vim scripts, it is recommended to use this directory layout:
@@ -105,14 +105,14 @@ Remarks:
 	C:\vim\vimfiles\ftplugin\*.vim	Filetype plugins
 	C:\vim\...			Other files you made.
   Distributed files:
-	C:\vim\vim73\vim.exe		The Vim version 7.3 executable.
-	C:\vim\vim73\doc\*.txt		The version 7.3 documentation files.
-	C:\vim\vim73\bugreport.vim	A Vim version 7.3 script.
-	C:\vim\vim73\...		Other version 7.3 distributed files.
+	C:\vim\vim74\vim.exe		The Vim version 7.4 executable.
+	C:\vim\vim74\doc\*.txt		The version 7.4 documentation files.
+	C:\vim\vim74\bugreport.vim	A Vim version 7.4 script.
+	C:\vim\vim74\...		Other version 7.4 distributed files.
   In this case the $VIM environment variable would be set like this:
 	set VIM=C:\vim
-  Then $VIMRUNTIME will automatically be set to "$VIM\vim73".  Don't add
-  "vim73" to $VIM, that won't work.
+  Then $VIMRUNTIME will automatically be set to "$VIM\vim74".  Don't add
+  "vim74" to $VIM, that won't work.
 
 - You can put your Vim executable anywhere else.  If the executable is not
   with the other Vim files, you should set $VIM. The simplest is to add a line
@@ -136,8 +136,8 @@ Remarks:
      Select Properties.
   5. In the Program tab, change the "Cmdline" to add "/c" and the name of the
      Vim executable.  Examples:
-	C:\command.com /c C:\vim\vim73\vim.exe
-	C:\command.com /c D:\editors\vim\vim73\vim.exe
+	C:\command.com /c C:\vim\vim74\vim.exe
+	C:\command.com /c D:\editors\vim\vim74\vim.exe
   6. Select the font, window size, etc. that you like.  If this isn't
      possible, select "Advanced" in the Program tab, and deselect "MS-DOS
      mode".

README_extra.txt

@@ -1,4 +1,4 @@
-README_extra.txt for version 7.3 of Vim: Vi IMproved.
+README_extra.txt for version 7.4b of Vim: Vi IMproved.
 
 These extra files of Vim are for special purposes.  This README explains what
 the files are for.  For general information about Vim, see the "README.txt"

README_mac.txt

@@ -1,4 +1,4 @@
-README_mac.txt for version 7.3 of Vim: Vi IMproved.
+README_mac.txt for version 7.4b of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Macintosh systems.
 See "README.txt" for general information about Vim.

README_ole.txt

@@ -1,4 +1,4 @@
-README_ole.txt for version 7.3 of Vim: Vi IMproved.
+README_ole.txt for version 7.4b of Vim: Vi IMproved.
 
 This archive contains gvim.exe with OLE interface and VisVim.
 This version of gvim.exe can also load a number of interface dynamically (you

README_os2.txt

@@ -1,32 +1,32 @@
-README_os2.txt for version 7.3 of Vim: Vi IMproved.
+README_os2.txt for version 7.4b of Vim: Vi IMproved.
 
 This file explains the installation of Vim on OS/2 systems.
 See "README.txt" for general information about Vim.
 
 
 NOTE: You will need two archives:
-  vim73rt.zip	contains the runtime files (same as for the PC version)
-  vim73os2.zip	contains the OS/2 executables
+  vim74rt.zip	contains the runtime files (same as for the PC version)
+  vim74os2.zip	contains the OS/2 executables
 
 1. Go to the directory where you want to put the Vim files.  Examples:
 	cd C:\
 	cd D:\editors
 
-2. Unpack the zip archives.  This will create a new directory "vim/vim73",
+2. Unpack the zip archives.  This will create a new directory "vim/vim74",
    in which all the distributed Vim files are placed.  Since the directory
    name includes the version number, it is unlikely that you overwrite
    existing files.
    Examples:
-	pkunzip -d vim73os2.zip
-	unzip vim73os2.zip
+	pkunzip -d vim74os2.zip
+	unzip vim74os2.zip
 
    After you unpacked the files, you can still move the whole directory tree
    to another location.
 
 3. Add the directory where vim.exe is to your path.  The simplest is to add a
    line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim73
-	set path=%path%;D:\editors\vim\vim73
+	set path=%path%;C:\vim\vim74
+	set path=%path%;D:\editors\vim\vim74
 
 That's it!
 
@@ -41,10 +41,10 @@ Extra remarks:
 	C:\vim\_viminfo			Dynamic info for 'viminfo'.
 	C:\vim\...			Other files you made.
   Distributed files:
-	C:\vim\vim73\vim.exe		The Vim version 7.3 executable.
-	C:\vim\vim73\doc\*.txt		The version 7.3 documentation files.
-	C:\vim\vim73\bugreport.vim	A Vim version 7.3 script.
-	C:\vim\vim73\...		Other version 7.3 distributed files.
+	C:\vim\vim74\vim.exe		The Vim version 7.4 executable.
+	C:\vim\vim74\doc\*.txt		The version 7.4 documentation files.
+	C:\vim\vim74\bugreport.vim	A Vim version 7.4 script.
+	C:\vim\vim74\...		Other version 7.4 distributed files.
   In this case the $VIM environment variable would be set like this:
 	set VIM=C:\vim
 

README_os390.txt

@@ -1,4 +1,4 @@
-README_zOS.txt for version 7.3 of Vim: Vi IMproved.
+README_zOS.txt for version 7.4b of Vim: Vi IMproved.
 
 This readme explains how to build Vim on z/OS.  Formerly called OS/390.
 See "README.txt" for general information about Vim.
@@ -29,7 +29,7 @@ console version).
 Compiling:
 ==========
 
-Vim can be compiled with or without GUI support. For 7.3 only the compilation
+Vim can be compiled with or without GUI support. For 7.4 only the compilation
 without GUI was tested. Below is a section about compiling with X11 but this
 is from an earlier version of Vim.
 
@@ -78,7 +78,7 @@ Change to the vim directory and do:
 With X11:
 ---------
 
-WARNING: This instruction was not tested with Vim 7.3.
+WARNING: This instruction was not tested with Vim 7.4.
 
 There are two ways for building VIM with X11 support. The first way is simple
 and results in a big executable (~13 Mb), the second needs a few additional

README_src.txt

@@ -1,10 +1,8 @@
-README_src.txt for version 7.3 of Vim: Vi IMproved.
+README_src.txt for version 7.4b of Vim: Vi IMproved.
 
 The source archive contains the files needed to compile Vim on Unix systems.
-It is packed for Unix systems (NL line separator).  It is also used for other
-systems in combination with the extra archive (vim-7.3-extra.tar.gz, in the
-"extra" directory of ftp.vim.org).
+It is packed for Unix systems (NL line separator).
 
 For more information, see the README.txt file that comes with the runtime
-archive (vim-7.3-rt.tar.gz).  To be able to run Vim you MUST get the runtime
+archive (vim-7.4-rt.tar.gz).  To be able to run Vim you MUST get the runtime
 archive too!

README_srcdos.txt

@@ -1,8 +1,8 @@
-README_srcdos.txt for version 7.3 of Vim: Vi IMproved.
+README_srcdos.txt for version 7.4b of Vim: Vi IMproved.
 
 See "README.txt" for general information about Vim.
 See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim73rt.zip).
+These files are in the runtime archive (vim74rt.zip).
 
 
 The DOS source archive contains the files needed to compile Vim on MS-DOS or

README_unix.txt

@@ -1,4 +1,4 @@
-README_unix.txt for version 7.3 of Vim: Vi IMproved.
+README_unix.txt for version 7.4b of Vim: Vi IMproved.
 
 This file explains the installation of Vim on Unix systems.
 See "README.txt" for general information about Vim.

README_vms.txt

@@ -1,4 +1,4 @@
-README_vms.txt for version 7.3 of Vim: Vi IMproved.
+README_vms.txt for version 7.4b of Vim: Vi IMproved.
 
 This file explains the installation of Vim on VMS systems.
 See "README.txt" in the runtime archive for information about Vim.

README_w32s.txt

@@ -1,4 +1,4 @@
-README_w32s.txt for version 7.3 of Vim: Vi IMproved.
+README_w32s.txt for version 7.4b of Vim: Vi IMproved.
 
 This archive contains the gvim.exe that was specifically compiled for use in
 the Win32s subsystem in MS-Windows 3.1 and 3.11.

nsis/gvim.nsi

@@ -5,7 +5,7 @@
 # WARNING: if you make changes to this script, look out for $0 to be valid,
 # because uninstall deletes most files in $0.
 
-# Location of gvim_ole.exe, vimd32.exe, GvimExt/*, etc.
+# Location of gvim_ole.exe, vimw32.exe, GvimExt/*, etc.
 !define VIMSRC "..\src"
 
 # Location of runtime files
@@ -22,7 +22,7 @@
 !define HAVE_NLS
 
 !define VER_MAJOR 7
-!define VER_MINOR 3
+!define VER_MINOR 4b
 
 # ----------- No configurable settings below this line -----------
 
@@ -40,7 +40,7 @@ RequestExecutionLevel highest
 ComponentText "This will install Vim ${VER_MAJOR}.${VER_MINOR} on your computer."
 DirText "Choose a directory to install Vim (must end in 'vim')"
 Icon icons\vim_16c.ico
-# NSIS2 uses a different strategy with six diferent images in a strip...
+# NSIS2 uses a different strategy with six different images in a strip...
 #EnabledBitmap icons\enabled.bmp
 #DisabledBitmap icons\disabled.bmp
 UninstallText "This will uninstall Vim ${VER_MAJOR}.${VER_MINOR} from your system."
@@ -56,6 +56,9 @@ LicenseData ${VIMRT}\doc\uganda.nsis.txt
   !packhdr temp.dat "upx --best --compress-icons=1 temp.dat"
 !endif
 
+SetCompressor /SOLID lzma
+XPStyle on
+
 # This adds '\vim' to the user choice automagically.  The actual value is
 # obtained below with ReadINIStr.
 InstallDir "$PROGRAMFILES\Vim"
@@ -247,11 +250,10 @@ Section "Vim console program (vim.exe)"
 	ReadRegStr $R0 HKLM \
 	   "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion
 	IfErrors 0 lbl_winnt
-	    # Windows 95/98/ME
-	    File /oname=vim.exe ${VIMSRC}\vimd32.exe
+	    # Windows 95/98/ME: not supported
 	    Goto lbl_done
 	lbl_winnt:
-	    # Windows NT/2000/XT
+	    # Windows NT/2000/XP and later
 	    File /oname=vim.exe ${VIMSRC}\vimw32.exe
 	lbl_done:
 	StrCpy $2 "$2 vim view vimdiff"

runtime/autoload/tohtml.vim

@@ -1,6 +1,6 @@
 " Vim autoload file for the tohtml plugin.
 " Maintainer: Ben Fritz <fritzophrenic@gmail.com>
-" Last Change: 2013 May 31
+" Last Change: 2013 Jun 19
 "
 " Additional contributors:
 "
@@ -401,15 +401,15 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
   call add(html, '</head>')
   let body_line_num = len(html)
   if !empty(s:settings.prevent_copy)
-    call add(html, "<body onload='FixCharWidth(); JumpToLine();'>")
+    call add(html, "<body onload='FixCharWidth();".(s:settings.line_ids ? " JumpToLine();" : "")."'>")
     call add(html, "<!-- hidden divs used by javascript to get the width of a char -->")
     call add(html, "<div id='oneCharWidth'>0</div>")
     call add(html, "<div id='oneInputWidth'><input size='1' value='0'".tag_close."</div>")
     call add(html, "<div id='oneEmWidth' style='width: 1em;'></div>")
   else
-    call add(html, '<body onload="JumpToLine();">')
+    call add(html, '<body'.(s:settings.line_ids ? ' onload="JumpToLine();"' : '').'>')
   endif
-  call add(html, "<table border='1' width='100%' id='vimCodeElement'>")
+  call add(html, "<table border='1' width='100%' id='vimCodeElement".s:settings.id_suffix."'>")
 
   call add(html, '<tr>')
   for buf in a:win_list
@@ -475,7 +475,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
     let temp = getline(1,'$')
     " clean out id on the main content container because we already set it on
     " the table
-    let temp[0] = substitute(temp[0], " id='vimCodeElement'", "", "")
+    let temp[0] = substitute(temp[0], " id='vimCodeElement[^']*'", "", "")
     " undo deletion of start and end part
     " so we can later save the file as valid html
     " TODO: restore using grabbed lines if undolevel is 1?
@@ -568,9 +568,9 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ '  var emWidth = document.getElementById("oneEmWidth").clientWidth;',
 	    \ '  if (inputWidth > goodWidth) {',
 	    \ '    while (ratio < 100*goodWidth/emWidth && ratio < 100) {',
-	    \ '    ratio += 5;',
-	    \ '  }',
-	    \ '  document.getElementById("vimCodeElement").className = "em"+ratio;',
+	    \ '      ratio += 5;',
+	    \ '    }',
+	    \ '    document.getElementById("vimCodeElement'.s:settings.id_suffix.'").className = "em"+ratio;',
 	    \ '  }',
 	    \ '}'
 	    \ ])
@@ -596,7 +596,7 @@ func! tohtml#Diff2HTML(win_list, buf_list) "{{{
 	    \ "",
 	    \ "  /* navigate upwards in the DOM tree to open all folds containing the line */",
 	    \ "  var node = lineElem;",
-	    \ "  while (node && node.id != 'vimCodeElement')",
+	    \ "  while (node && node.id != 'vimCodeElement".s:settings.id_suffix."')",
 	    \ "  {",
 	    \ "    if (node.className == 'closed-fold')",
 	    \ "    {",
@@ -722,6 +722,7 @@ func! tohtml#GetUserSettings() "{{{
     call tohtml#GetOption(user_settings,     'no_invalid', 0 )
     call tohtml#GetOption(user_settings,   'whole_filler', 0 )
     call tohtml#GetOption(user_settings,      'use_xhtml', 0 )
+    call tohtml#GetOption(user_settings,       'line_ids', user_settings.number_lines )
     " }}}
     
     " override those settings that need it {{{
@@ -855,6 +856,20 @@ func! tohtml#GetUserSettings() "{{{
       let user_settings.no_invalid = 0
     endif
 
+    if exists('g:html_id_expr')
+      let user_settings.id_suffix = eval(g:html_id_expr)
+      if user_settings.id_suffix !~ '^[-_:.A-Za-z0-9]*$'
+	echohl WarningMsg
+	echomsg '2html: g:html_id_expr evaluated to invalid string for HTML id attributes'
+	echomsg '2html: Omitting user-specified suffix'
+	echohl None
+	sleep 3
+	let user_settings.id_suffix=""
+      endif
+    else
+      let user_settings.id_suffix=""
+    endif
+
     " TODO: font
 
     return user_settings

runtime/autoload/xmlcomplete.vim

@@ -1,7 +1,7 @@
 " Vim completion script
 " Language:	XML
 " Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2006 Aug 15
+" Last Change:	2013 Jun 29
 " Version: 1.9
 "
 " Changelog:
@@ -475,12 +475,12 @@ function! s:InCommentAt(line, col)
 endfunction
 
 function! s:SetKeywords()
-	let g:IsKeywordBak=&iskeyword
-	let &iskeyword='33-255'
+	let s:IsKeywordBak=&l:iskeyword
+	let &l:iskeyword='33-255'
 endfunction
 
 function! s:RestoreKeywords()
-	let &iskeyword=g:IsKeywordBak
+	let &l:iskeyword=s:IsKeywordBak
 endfunction
 
 function! s:Push(el, sname)

runtime/autoload/zip.vim

@@ -1,10 +1,10 @@
 " zip.vim: Handles browsing zipfiles
 "            AUTOLOAD PORTION
-" Date:		Apr 17, 2013
-" Version:	26
+" Date:		Jul 02, 2013
+" Version:	27
 " Maintainer:	Charles E Campbell <NdrOchip@ScampbellPfamily.AbizM-NOSPAM>
 " License:	Vim License  (see vim's :help license)
-" Copyright:    Copyright (C) 2005-2012 Charles E. Campbell {{{1
+" Copyright:    Copyright (C) 2005-2013 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
 "               with or without modifications, provided that this copyright
 "               notice is copied with it. Like anything else that's free,
@@ -13,13 +13,14 @@
 "               this plugin, you agree that in no event will the copyright
 "               holder be liable for any damages resulting from the use
 "               of this software.
+"redraw!|call DechoSep()|call inputsave()|call input("Press <cr> to continue")|call inputrestore()
 
 " ---------------------------------------------------------------------
 " Load Once: {{{1
 if &cp || exists("g:loaded_zip")
  finish
 endif
-let g:loaded_zip= "v26"
+let g:loaded_zip= "v27"
 if v:version < 702
  echohl WarningMsg
  echo "***warning*** this version of zip needs vim 7.2"
@@ -28,6 +29,7 @@ if v:version < 702
 endif
 let s:keepcpo= &cpo
 set cpo&vim
+"DechoTabOn
 
 let s:zipfile_escape = ' ?&;\'
 let s:ERROR          = 2
@@ -60,6 +62,16 @@ endif
 " zip#Browse: {{{2
 fun! zip#Browse(zipfile)
 "  call Dfunc("zip#Browse(zipfile<".a:zipfile.">)")
+  " sanity check: insure that the zipfile has "PK" as its first two letters
+  "               (zipped files have a leading PK as a "magic cookie")
+  if !filereadable(a:zipfile) || readfile(a:zipfile, "", 1)[0] !~ '^PK'
+   exe "noautocmd e ".fnameescape(a:zipfile)
+"   call Dret("zip#Browse : not a zipfile<".a:zipfile.">")
+   return
+"  else        " Decho
+"   call Decho("zip#Browse: a:zipfile<".a:zipfile."> passed PK test - its a zip file")
+  endif
+
   let repkeep= &report
   set report=10
 
@@ -197,6 +209,7 @@ fun! zip#Read(fname,mode)
   "   exe "keepj sil! r! ".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1)
   " but allows zipfile:... entries in quickfix lists
   let temp = tempname()
+"  call Decho("using temp file<".temp.">")
   let fn   = expand('%:p')
   exe "sil! !".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1).' > '.temp
 "  call Decho("exe sil! !".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1).' > '.temp)
@@ -208,7 +221,7 @@ fun! zip#Read(fname,mode)
   filetype detect
 
   " cleanup
-  keepj 0d
+  "  keepj 0d   " used to be needed for the ...r! ... method
   set nomod
 
   let &report= repkeep

runtime/compiler/checkstyle.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
 " Compiler:	Checkstyle
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/checkstyle.vim
-" Last Change:	2004 Nov 27
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jun 26
 
 if exists("current_compiler")
   finish
@@ -17,4 +16,4 @@ CompilerSet makeprg=java\ com.puppycrawl.tools.checkstyle.Main\ -f\ plain
 
 " sample error: WebTable.java:282: '+=' is not preceeded with whitespace.
 "		WebTable.java:201:1: '{' should be on the previous line.
-CompilerSet errorformat=%f:%l:\ %m,%f:%l:%v:\ %m,%-G%.%#
+CompilerSet errorformat=%f:%l:%v:\ %m,%f:%l:\ %m,%-G%.%#

runtime/compiler/javac.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
-" Compiler:     javac
-" Maintainer:   Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/javac.vim
-" Last Change:  2004 Nov 27
+" Compiler:	javac
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2004 Nov 27
 
 if exists("current_compiler")
   finish

runtime/compiler/ocaml.vim

@@ -0,0 +1,44 @@
+" Vim Compiler File
+" Compiler:	ocaml
+" Maintainer:	See ftplugin/ocaml.vim (?)
+" Last Change:	June 2013 by Marc Weber
+"
+" Marc Weber's comments:
+" Setting makeprg doesn't make sense, because there is ocamlc, ocamlopt,
+" ocamake and whatnot. So which one to use?
+"
+" This error format was moved from ftplugin/ocaml.vim to this file,
+" because ftplugin is the wrong file to set an error format
+" and the error format itself is annoying because it joins many lines in this
+" error case:
+"
+"    Error: The implementation foo.ml does not match the interface foo.cmi:
+"    Modules do not match case.
+"
+" So having it here makes people opt-in
+
+
+if exists("current_compiler")
+    finish
+endif
+let current_compiler = "ocaml"
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet errorformat =
+      \%EFile\ \"%f\"\\,\ line\ %l\\,\ characters\ %c-%*\\d:,
+      \%EFile\ \"%f\"\\,\ line\ %l\\,\ character\ %c:%m,
+      \%+EReference\ to\ unbound\ regexp\ name\ %m,
+      \%Eocamlyacc:\ e\ -\ line\ %l\ of\ \"%f\"\\,\ %m,
+      \%Wocamlyacc:\ w\ -\ %m,
+      \%-Zmake%.%#,
+      \%C%m,
+      \%D%*\\a[%*\\d]:\ Entering\ directory\ `%f',
+      \%X%*\\a[%*\\d]:\ Leaving\ directory\ `%f',
+      \%D%*\\a:\ Entering\ directory\ `%f',
+      \%X%*\\a:\ Leaving\ directory\ `%f',
+      \%DMaking\ %*\\a\ in\ %f
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/php.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
-" Compiler:	PHP
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/php.vim
-" Last Change:	2004 Nov 27
+" Compiler:	PHP CLI
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jun 25
 
 if exists("current_compiler")
   finish
@@ -17,12 +16,11 @@ let s:cpo_save = &cpo
 set cpo-=C
 
 CompilerSet makeprg=php\ -lq
-
-CompilerSet errorformat=%E<b>Parse\ error</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
-		       \%W<b>Notice</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
-		       \%EParse\ error:\ %m\ in\ %f\ on\ line\ %l,
-		       \%WNotice:\ %m\ in\ %f</b>\ on\ line\ %l,
-		       \%-G%.%#
+CompilerSet errorformat=%E<b>%.%#Parse\ error</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
+		    \%W<b>%.%#Notice</b>:\ %m\ in\ <b>%f</b>\ on\ line\ <b>%l</b><br\ />,
+		    \%E%.%#Parse\ error:\ %m\ in\ %f\ on\ line\ %l,
+		    \%W%.%#Notice:\ %m\ in\ %f\ on\ line\ %l,
+		    \%-G%.%#
 
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/compiler/se.vim

@@ -1,8 +1,7 @@
 " Vim compiler file
-" Compiler:	se (SmartEiffel Compiler)
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/se.vim
-" Last Change:	2004 Nov 27
+" Compiler:	se (Liberty Eiffel Compiler)
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jun 29
 
 if exists("current_compiler")
   finish
@@ -16,12 +15,15 @@ endif
 let s:cpo_save = &cpo
 set cpo-=C
 
-CompilerSet makeprg=compile\ %
+CompilerSet makeprg=se\ c
 
 CompilerSet errorformat=%W******\ Warning:\ %m,
 		    \%E******\ Fatal\ Error:\ %m,
 		    \%E******\ Error:\ %m,
-		    \%CLine\ %l\ column\ %c\ in\ %\\w%\\+\ (%f)\ :,
+		    \%ZLine\ %l\ column\ %c\ in\ %.%#\ (%f)\ %\\=:,
+		    \%ZLine\ %l\ columns\ %c\\,\ %\\d%\\+\ %.%#\ (%f)\ %\\=:,
+		    \%+C%*[^\ ]%.%#,
+		    \%-GThe\ source\ lines\ involved,
 		    \%-G%.%#
 
 let &cpo = s:cpo_save

runtime/compiler/tcl.vim

@@ -1,7 +1,6 @@
 " Vim compiler file
 " Compiler:	tcl
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/tcl.vim
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
 " Last Change:	2004 Nov 27
 
 if exists("current_compiler")

runtime/compiler/tidy.vim

@@ -1,11 +1,7 @@
 " Vim compiler file
 " Compiler:	HTML Tidy
-" Maintainer:	Doug Kearns <djkea2@gus.gscit.monash.edu.au>
-" URL:		http://gus.gscit.monash.edu.au/~djkea2/vim/compiler/tidy.vim
-" Last Change:	2004 Nov 27
-
-" NOTE: set 'tidy_compiler_040800' if you are using the 4th August 2000 release
-"       of HTML Tidy.
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2013 Jul 7
 
 if exists("current_compiler")
   finish
@@ -16,13 +12,7 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
   command -nargs=* CompilerSet setlocal <args>
 endif
 
-" this is needed to work around a bug in the 04/08/00 release of tidy which
-" failed to set the filename if the -quiet option was used
-if exists("tidy_compiler_040800")
-  CompilerSet makeprg=tidy\ -errors\ --gnu-emacs\ yes\ %
-else
-  CompilerSet makeprg=tidy\ -quiet\ -errors\ --gnu-emacs\ yes\ %
-endif
+CompilerSet makeprg=tidy\ -quiet\ -errors\ --gnu-emacs\ yes\ %
 
 " sample warning: foo.html:8:1: Warning: inserting missing 'foobar' element
 " sample error:   foo.html:9:2: Error: <foobar> is not recognized!

runtime/compiler/xmllint.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
 " Compiler:	xmllint
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2013 Jun 1
+" Last Change:	2013 Jul 8
 
 if exists("current_compiler")
   finish
@@ -15,7 +15,7 @@ endif
 let s:cpo_save = &cpo
 set cpo-=C
 
-CompilerSet makeprg=xmllint\ --valid\ --noout\ 
+CompilerSet makeprg=xmllint\ --valid\ --noout
 
 CompilerSet errorformat=%+E%f:%l:\ %.%#\ error\ :\ %m,
 		    \%+W%f:%l:\ %.%#\ warning\ :\ %m,

runtime/doc/arabic.txt

@@ -1,4 +1,4 @@
-*arabic.txt*	For Vim version 7.3.  Last change: 2010 Nov 13
+*arabic.txt*	For Vim version 7.4b.  Last change: 2010 Nov 13
 
 
 		  VIM REFERENCE MANUAL	  by Nadim Shaikli

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 7.3.  Last change: 2013 Jun 15
+*autocmd.txt*   For Vim version 7.4b.  Last change: 2013 Jun 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 7.3.  Last change: 2013 Mar 19
+*change.txt*    For Vim version 7.4b.  Last change: 2013 Jul 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -71,9 +71,21 @@ For inserting text see |insert.txt|.
 			"D" deletes the highlighted text plus all text until
 			the end of the line.  {not in Vi}
 
-					*:d* *:de* *:del* *:delete* *:dl*
+					*:d* *:de* *:del* *:delete* *:dl* *:dp*
 :[range]d[elete] [x]	Delete [range] lines (default: current line) [into
 			register x].
+			Note these weird abbreviations:
+			   :dl		delete and list
+			   :dell	idem
+			   :delel	idem
+			   :deletl	idem
+			   :deletel	idem
+			   :dp		delete and print
+			   :dep		idem
+			   :delp	idem
+			   :delep	idem
+			   :deletp	idem
+			   :deletep	idem
 
 :[range]d[elete] [x] {count}
 			Delete {count} lines, starting with [range]

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 7.3.  Last change: 2013 Mar 16
+*cmdline.txt*   For Vim version 7.4b.  Last change: 2013 Mar 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/debug.txt

@@ -1,4 +1,4 @@
-*debug.txt*     For Vim version 7.3.  Last change: 2012 Feb 11
+*debug.txt*     For Vim version 7.4b.  Last change: 2012 Feb 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/debugger.txt

@@ -1,4 +1,4 @@
-*debugger.txt*  For Vim version 7.3.  Last change: 2005 Mar 29
+*debugger.txt*  For Vim version 7.4b.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur

runtime/doc/develop.txt

@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 7.3.  Last change: 2013 Apr 27
+*develop.txt*   For Vim version 7.4b.  Last change: 2013 Apr 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 7.3.  Last change: 2012 Sep 05
+*diff.txt*      For Vim version 7.4b.  Last change: 2013 Jul 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -128,9 +128,9 @@ file for a moment and come back to the same file and be in diff mode again.
 :diffo[ff]!	Switch off diff mode for the current window and in all windows
 		in the current tab page where 'diff' is set.
 
-The ":diffoff" command resets the relevant options to their default value.
-This may be different from what the values were before diff mode was started,
-the old values are not remembered.
+The ":diffoff" command resets the relevant options to the values they had when
+using |:diffsplit|, |:diffpatch| , |:diffthis|. or starting Vim in diff mode.
+Otherwise they are set to their default value:
 
 	'diff'		off
 	'scrollbind'	off

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 7.3.  Last change: 2011 Jan 15
+*digraph.txt*   For Vim version 7.4b.  Last change: 2011 Jan 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 7.3.  Last change: 2013 Feb 07
+*editing.txt*   For Vim version 7.4b.  Last change: 2013 Feb 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 7.3.  Last change: 2013 Jun 11
+*eval.txt*	For Vim version 7.4b.  Last change: 2013 Jun 11
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar

runtime/doc/evim-ja.UTF-8.1

@@ -0,0 +1,51 @@
+.TH EVIM 1 "2002 February 16"
+.SH 名前
+evim \- easy Vim, モードレスエディタ Vim
+.SH 書式
+.br
+.B evim
+[options] [file ..]
+.br
+.B eview
+.SH 説明
+.B eVim
+は
+.B Vim
+を起動して、モードレスエディタとして動作するためのオプションを設定します。
+Vim の動作が point-and-click エディタのような動作になります。
+MS-Windows のメモ帳のような動作です。
+.B eVim
+は常に GUI で起動し、メニューとツールバーを表示します。
+.PP
+どうしても Vim の操作に馴染めない場合に使ってください。
+編集効率は下がります。
+.PP
+.B eview
+は同様に、読み込み専用モードで起動します。evim \-R と同じです。
+.PP
+引数や Vim についての詳細は vim(1) を参照してください。
+.PP
+オプション 'insertmode' が設定され、テキストを直接、入力できるようになりま
+す。
+.br
+コピーとペーストのキー操作が MS-Windows と同じになるように、マップが設定され
+ます。
+CTRL-X が切り取り、CTRL-C がコピー、CTRL-V がペーストです。
+標準の CTRL-V の操作は CTRL-Q に割り当てられます。
+.SH オプション
+vim(1) を参照してください。
+.SH ファイル
+.TP 15
+/usr/local/lib/vim/evim.vim
+eVim の初期化スクリプト。
+.SH 別名
+evim は "gumbies のための Vim" とも呼ばれています。
+evim を使っているあなたはきっと、頭にハンカチをかぶっているのです。
+(訳注: gumbies は Monty Python に登場するおもしろ集団。ハンカチをかぶっ
+ている。)
+.SH 関連項目
+vim(1)
+.SH 著者
+.B Vim
+のほとんどの機能は Bram Moolenaar が開発し、多くの人が協力しました。
+メニューの Help/Credits を参照してください。

runtime/doc/farsi.txt

@@ -1,4 +1,4 @@
-*farsi.txt*     For Vim version 7.3.  Last change: 2010 Aug 07
+*farsi.txt*     For Vim version 7.4b.  Last change: 2010 Aug 07
 
 
 		  VIM REFERENCE MANUAL    by Mortaza Ghassab Shiran

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 7.3.  Last change: 2013 May 25
+*filetype.txt*  For Vim version 7.4b.  Last change: 2013 May 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 7.3.  Last change: 2010 May 13
+*fold.txt*      For Vim version 7.4b.  Last change: 2010 May 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/ft_ada.txt

@@ -1,4 +1,4 @@
-*ft_ada.txt*	For Vim version 7.3.  Last change: 2010 Jul 20
+*ft_ada.txt*	For Vim version 7.4b.  Last change: 2010 Jul 20
 
 
 		    ADA FILE TYPE PLUG-INS REFERENCE MANUAL~

runtime/doc/ft_sql.txt

@@ -1,4 +1,4 @@
-*ft_sql.txt*	For Vim version 7.3.  Last change: 2013 May 15
+*ft_sql.txt*	For Vim version 7.4b.  Last change: 2013 May 15
 
 by David Fishburn
 

runtime/doc/gui.txt

@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 7.3.  Last change: 2013 Jun 12
+*gui.txt*       For Vim version 7.4b.  Last change: 2013 Jun 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/gui_w16.txt

@@ -1,4 +1,4 @@
-*gui_w16.txt*   For Vim version 7.3.  Last change: 2005 Mar 29
+*gui_w16.txt*   For Vim version 7.4b.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 7.3.  Last change: 2012 Aug 04
+*gui_w32.txt*   For Vim version 7.4b.  Last change: 2012 Aug 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/gui_x11.txt

@@ -1,4 +1,4 @@
-*gui_x11.txt*   For Vim version 7.3.  Last change: 2011 Sep 14
+*gui_x11.txt*   For Vim version 7.4b.  Last change: 2011 Sep 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/hangulin.txt

@@ -1,4 +1,4 @@
-*hangulin.txt*  For Vim version 7.3.  Last change: 2009 Jun 24
+*hangulin.txt*  For Vim version 7.4b.  Last change: 2009 Jun 24
 
 
 		  VIM REFERENCE MANUAL    by Chi-Deok Hwang and Sung-Hyun Nam

runtime/doc/hebrew.txt

@@ -1,4 +1,4 @@
-*hebrew.txt*    For Vim version 7.3.  Last change: 2007 Jun 14
+*hebrew.txt*    For Vim version 7.4b.  Last change: 2007 Jun 14
 
 
 	   VIM REFERENCE MANUAL    by Ron Aaron (and Avner Lottem)

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 7.3.  Last change: 2012 Dec 06
+*help.txt*	For Vim version 7.4b.  Last change: 2012 Dec 06
 
 			VIM - main help file
 									 k

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 7.3.  Last change: 2012 Nov 28
+*helphelp.txt*	For Vim version 7.4b.  Last change: 2012 Nov 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/howto.txt

@@ -1,4 +1,4 @@
-*howto.txt*	For Vim version 7.3.  Last change: 2006 Apr 02
+*howto.txt*	For Vim version 7.4b.  Last change: 2006 Apr 02
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar

runtime/doc/if_cscop.txt

@@ -1,4 +1,4 @@
-*if_cscop.txt*  For Vim version 7.3.  Last change: 2011 Jun 12
+*if_cscop.txt*  For Vim version 7.4b.  Last change: 2011 Jun 12
 
 
 		  VIM REFERENCE MANUAL    by Andy Kahn

runtime/doc/if_lua.txt

@@ -1,4 +1,4 @@
-*if_lua.txt*    For Vim version 7.3.  Last change: 2012 Jun 29
+*if_lua.txt*    For Vim version 7.4b.  Last change: 2012 Jun 29
 
 
 		  VIM REFERENCE MANUAL    by Luis Carvalho

runtime/doc/if_mzsch.txt

@@ -1,4 +1,4 @@
-*if_mzsch.txt*  For Vim version 7.3.  Last change: 2012 Dec 17
+*if_mzsch.txt*  For Vim version 7.4b.  Last change: 2012 Dec 17
 
 
 		  VIM REFERENCE MANUAL    by Sergey Khorev

runtime/doc/if_ole.txt

@@ -1,4 +1,4 @@
-*if_ole.txt*    For Vim version 7.3.  Last change: 2008 Aug 16
+*if_ole.txt*    For Vim version 7.4b.  Last change: 2008 Aug 16
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore

runtime/doc/if_perl.txt

@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 7.3.  Last change: 2012 Oct 25
+*if_perl.txt*   For Vim version 7.4b.  Last change: 2012 Oct 25
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 7.3.  Last change: 2013 Jun 02
+*if_pyth.txt*   For Vim version 7.4b.  Last change: 2013 Jul 10
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -23,6 +23,7 @@ The Python 2.x interface is available only when Vim was compiled with the
 |+python| feature.
 The Python 3 interface is available only when Vim was compiled with the
 |+python3| feature.
+Both can be available at the same time, but read |python-2-and-3|.
 
 ==============================================================================
 1. Commands						*python-commands*
@@ -711,7 +712,7 @@ Vim can be built in four ways (:version output):
 3. Python 3 support only    (-python, +python3 or +python3/dyn)
 4. Python 2 and 3 support   (+python/dyn, +python3/dyn)
 
-Some more details on the special case 4:
+Some more details on the special case 4:  *python-2-and-3*
 
 When Python 2 and Python 3 are both supported they must be loaded dynamically.
 
@@ -740,6 +741,11 @@ To work around such problems there are these options:
 3. You undefine PY_NO_RTLD_GLOBAL in auto/config.h after configuration.  This
    may crash Vim though.
 
+							*E880*
+Raising SystemExit exception in python isn't endorsed way to quit vim, use: >
+	:py vim.command("qall!")
+<
+
 							*has-python*
 You can test what Python version is available with: >
 	if has('python')

runtime/doc/if_ruby.txt

@@ -1,4 +1,4 @@
-*if_ruby.txt*   For Vim version 7.3.  Last change: 2012 Aug 02
+*if_ruby.txt*   For Vim version 7.4b.  Last change: 2012 Aug 02
 
 
 		  VIM REFERENCE MANUAL    by Shugo Maeda

runtime/doc/if_sniff.txt

@@ -1,4 +1,4 @@
-*if_sniff.txt*	For Vim version 7.3.  Last change: 2005 Mar 29
+*if_sniff.txt*	For Vim version 7.4b.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL

runtime/doc/if_tcl.txt

@@ -1,4 +1,4 @@
-*if_tcl.txt*    For Vim version 7.3.  Last change: 2012 Aug 02
+*if_tcl.txt*    For Vim version 7.4b.  Last change: 2012 Aug 02
 
 
 		  VIM REFERENCE MANUAL    by Ingo Wilken

runtime/doc/indent.txt

@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 7.3.  Last change: 2013 Jun 13
+*indent.txt*    For Vim version 7.4b.  Last change: 2013 Jun 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.3.  Last change: 2013 Jun 06
+*index.txt*     For Vim version 7.4b.  Last change: 2013 Jul 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -801,6 +801,10 @@ tag		char	      note action in Normal mode	~
 |zE|		zE		   eliminate all folds
 |zF|		zF		   create a fold for N lines
 |zG|		zG		   mark word as good spelled word
+|zH|		zH		   when 'wrap' off scroll half a screenwidth
+				   to the right
+|zL|		zL		   when 'wrap' off scroll half a screenwidth
+				   to the left
 |zM|		zM		   set 'foldlevel' to zero
 |zN|		zN		   set 'foldenable'
 |zO|		zO		   open folds recursively
@@ -1187,9 +1191,12 @@ tag	      command	      action ~
 |:digraphs|	:dig[raphs]	show or enter digraphs
 |:display|	:di[splay]	display registers
 |:djump|	:dj[ump]	jump to #define
-|:dlist|	:dl[ist]	list #defines
+|:dl|		:dl		short for |:delete|
+|:dl|		:del[ete]l	short for |:delete|
+|:dlist|	:dli[st]	list #defines
 |:doautocmd|	:do[autocmd]	apply autocommands to current buffer
 |:doautoall|	:doautoa[ll]	apply autocommands for all loaded buffers
+|:dp|		:d[elete]p	short for |:delete|
 |:drop|		:dr[op]		jump to window editing file or edit file in
 				current window
 |:dsearch|	:ds[earch]	list one #define

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.3.  Last change: 2013 Apr 12
+*insert.txt*    For Vim version 7.4b.  Last change: 2013 Jul 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -136,6 +136,8 @@ CTRL-R {0-9a-z"%#*+:.-=}					*i_CTRL-R*
 				too.
 				When the result is a Float it's automatically
 				converted to a String.
+				When append() or setline() is invoked the undo
+				sequence will be broken.
 		See |registers| about registers.  {not in Vi}
 
 CTRL-R CTRL-R {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-R*
@@ -1357,7 +1359,7 @@ Complete:
 
 Completion works in separate JavaScript files (&ft==javascript), inside of
 <script> tag of (X)HTML and in values of event attributes (including scanning
-of external files.
+of external files).
 
 DOM compatibility
 
@@ -1513,8 +1515,7 @@ The basic form of this variable is: >
     let g:omni_syntax_group_include_{filetype} = 'regex,comma,separated'
 
 The PHP language has an enormous number of items which it knows how to syntax
-highlight.  These these items will be available within the omni completion
-list.  
+highlight.  These items will be available within the omni completion list.
 
 Some people may find this list unwieldy or are only interested in certain
 items.  There are two ways to prune this list (if necessary).  If you find

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 7.3.  Last change: 2012 Sep 05
+*intro.txt*     For Vim version 7.4b.  Last change: 2013 Jun 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -261,6 +261,7 @@ Vim would never have become what it is now, without the help of these people!
 I wish to thank all the people that sent me bug reports and suggestions.  The
 list is too long to mention them all here.  Vim would not be the same without
 the ideas from all these people: They keep Vim alive!
+*love* *peace* *friendship* *gross-national-happiness*
 
 
 In this documentation there are several references to other versions of Vi:

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.3.  Last change: 2013 Jun 12
+*map.txt*       For Vim version 7.4b.  Last change: 2013 Jul 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -159,9 +159,9 @@ type "a", then "bar" will get inserted.
 
 1.2 SPECIAL ARGUMENTS					*:map-arguments*
 
-"<buffer>", "<silent>", "<special>", "<script>", "<expr>" and "<unique>" can
-be used in any order.  They must appear right after the command, before any
-other arguments.
+"<buffer>", "<nowait>", "<silent>", "<special>", "<script>", "<expr>" and
+"<unique>" can be used in any order.  They must appear right after the
+command, before any other arguments.
 
 				*:map-local* *:map-<buffer>* *E224* *E225*
 If the first argument to one of these commands is "<buffer>" the mapping will
@@ -169,7 +169,9 @@ be effective in the current buffer only.  Example: >
 	:map <buffer>  ,w  /[.,;]<CR>
 Then you can map ",w" to something else in another buffer: >
 	:map <buffer>  ,w  /[#&!]<CR>
-The local buffer mappings are used before the global ones.
+The local buffer mappings are used before the global ones.  See <nowait> below
+to make a short local mapping not taking effect when a longer global one
+exists.
 The "<buffer>" argument can also be used to clear mappings: >
 	:unmap <buffer> ,w
 	:mapclear <buffer>
@@ -177,6 +179,14 @@ Local mappings are also cleared when a buffer is deleted, but not when it is
 unloaded.  Just like local option values.
 Also see |map-precedence|.
 
+						*:map-<nowait>* *:map-nowait*
+When defining a buffer-local mapping for "," there may be a global mapping
+that starts with ",".  Then you need to type another character for Vim to know
+whether to use the "," mapping or the longer one.  To avoid this add the
+<nowait> argument.  Then the mapping will be used when it matches, Vim does
+not wait for more characters to be typed.  However, if the characters were
+already type they are used.
+
 						*:map-<silent>* *:map-silent*
 To define a mapping which will not be echoed on the command line, add
 "<silent>" as the first argument.  Example: >
@@ -587,7 +597,7 @@ this (see |<>|).  Example: >
 To avoid mapping of the characters you type in insert or Command-line mode,
 type a CTRL-V first.  The mapping in Insert mode is disabled if the 'paste'
 option is on.
-
+							*map-error*
 Note that when an error is encountered (that causes an error message or beep)
 the rest of the mapping is not executed.  This is Vi-compatible.
 
@@ -659,13 +669,12 @@ might want to set the 'ttimeout' option.
 Buffer-local mappings (defined using |:map-<buffer>|) take precedence over
 global mappings.  When a buffer-local mapping is the same as a global mapping,
 Vim will use the buffer-local mapping.  In addition, Vim will use a complete
-buffer-local mapping immediately, even if a longer global mapping has the
-buffer-local mapping as a prefix.  For example, given the following two
-mappings: >
-    :map <buffer> \a   :echo "Local \a"<CR>
-    :map          \abc :echo "Global \abc"<CR>
-The buffer-local mapping \a will be used immediately.  Vim will not wait for
-more characters to see if the user might be typing \abc.
+mapping immediately if it was defined with <nowait>, even if a longer mapping
+has the same prefix.  For example, given the following two mappings: >
+    :map <buffer> <nowait> \a   :echo "Local \a"<CR>
+    :map                   \abc :echo "Global \abc"<CR>
+When typing \a the buffer-local mapping will be used immediately.  Vim will
+not wait for more characters to see if the user might be typing \abc.
 
 							*map-keys-fails*
 There are situations where key codes might not be recognized:

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 7.3.  Last change: 2013 May 18
+*mbyte.txt*     For Vim version 7.4b.  Last change: 2013 May 18
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 7.3.  Last change: 2013 Feb 23
+*message.txt*   For Vim version 7.4b.  Last change: 2013 Feb 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/mlang.txt

@@ -1,4 +1,4 @@
-*mlang.txt*     For Vim version 7.3.  Last change: 2012 Jan 15
+*mlang.txt*     For Vim version 7.4b.  Last change: 2012 Jan 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 7.3.  Last change: 2013 Mar 07
+*motion.txt*    For Vim version 7.4b.  Last change: 2013 Jul 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -236,6 +236,8 @@ g$ or g<End>		When lines wrap ('wrap' on): To the last character of
 			the line is not on the screen or when a count is used.
 			Additionally, vertical movements keep the column,
 			instead of going to the end of the line.
+			When 'virtualedit' is enabled moves to the end of the
+			screen line.
 			{not in Vi}
 
 							*bar*
@@ -1083,7 +1085,8 @@ only once.
 
 When the |:keepjumps| command modifier is used, jumps are not stored in the
 jumplist.  Jumps are also not stored in other cases, e.g., in a |:global|
-command.  You can explicitly add a jump by setting the ' mark.
+command.  You can explicitly add a jump by setting the ' mark with "m'".  Note
+that calling setpos() does not do this.
 
 After the CTRL-O command that got you into line 1154 you could give another
 jump command (e.g., "G").  The jump list would then become:

runtime/doc/netbeans.txt

@@ -1,4 +1,4 @@
-*netbeans.txt*  For Vim version 7.3.  Last change: 2012 Jan 26
+*netbeans.txt*  For Vim version 7.4b.  Last change: 2012 Jan 26
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur et al.

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.3.  Last change: 2013 Jun 12
+*options.txt*	For Vim version 7.4b.  Last change: 2013 Jul 09
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -482,39 +482,42 @@ to set options automatically for one or more files:
 There are two forms of modelines.  The first form:
 	[text]{white}{vi:|vim:|ex:}[white]{options}
 
-[text]		any text or empty
-{white}		at least one blank character (<Space> or <Tab>)
-{vi:|vim:|ex:}	the string "vi:", "vim:" or "ex:"
-[white]		optional white space
-{options}	a list of option settings, separated with white space or ':',
-		where each part between ':' is the argument for a ":set"
-		command (can be empty)
+[text]			any text or empty
+{white}			at least one blank character (<Space> or <Tab>)
+{vi:|vim:|ex:}		the string "vi:", "vim:" or "ex:"
+[white]			optional white space
+{options}		a list of option settings, separated with white space
+			or ':', where each part between ':' is the argument
+			for a ":set" command (can be empty)
 
-Example:
+Examples:
    vi:noai:sw=3 ts=6 ~
+   vim: tw=77 ~
 
 The second form (this is compatible with some versions of Vi):
 
-	[text]{white}{vi:|vim:|ex:}[white]se[t] {options}:[text]
+	[text]{white}{vi:|vim:|Vim:|ex:}[white]se[t] {options}:[text]
 
-[text]		any text or empty
-{white}		at least one blank character (<Space> or <Tab>)
-{vi:|vim:|ex:}	the string "vi:", "vim:" or "ex:"
-[white]		optional white space
-se[t]		the string "set " or "se " (note the space)
-{options}	a list of options, separated with white space, which is the
-		argument for a ":set" command
-:		a colon
-[text]		any text or empty
+[text]			any text or empty
+{white}			at least one blank character (<Space> or <Tab>)
+{vi:|vim:|Vim:|ex:}	the string "vi:", "vim:", "Vim:" or "ex:"
+[white]			optional white space
+se[t]			the string "set " or "se " (note the space); When
+			"Vim" is used it must be "set".
+{options}		a list of options, separated with white space, which
+			is the argument for a ":set" command
+:			a colon
+[text]			any text or empty
 
-Example:
+Examples:
    /* vim: set ai tw=75: */ ~
+   /* Vim: set ai tw=75: */ ~
 
-The white space before {vi:|vim:|ex:} is required.  This minimizes the chance
-that a normal word like "lex:" is caught.  There is one exception: "vi:" and
-"vim:" can also be at the start of the line (for compatibility with version
-3.0).  Using "ex:" at the start of the line will be ignored (this could be
-short for "example:").
+The white space before {vi:|vim:|Vim:|ex:} is required.  This minimizes the
+chance that a normal word like "lex:" is caught.  There is one exception:
+"vi:" and "vim:" can also be at the start of the line (for compatibility with
+version 3.0).  Using "ex:" at the start of the line will be ignored (this
+could be short for "example:").
 
 							*modeline-local*
 The options are set like with ":setlocal": The new value only applies to the
@@ -530,7 +533,7 @@ in another window.  But window-local options will be set.
 
 							*modeline-version*
 If the modeline is only to be used for some versions of Vim, the version
-number can be specified where "vim:" is used:
+number can be specified where "vim:" or "Vim:" is used:
 	vim{vers}:	version {vers} or later
 	vim<{vers}:	version before {vers}
 	vim={vers}:	version {vers}
@@ -3993,6 +3996,26 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Can be overruled by using "\c" or "\C" in the pattern, see
 	|/ignorecase|.
 
+						*'imactivatefunc'* *'imaf'*
+'imactivatefunc' 'imaf'	string (default "")
+			global
+			{not in Vi}
+			{only available when compiled with |+xim| and
+			|+GUI_GTK|}
+	This option specifies a function that will be called to
+	activate/inactivate Input Method.
+
+	Example: >
+		function ImActivateFunc(active)
+		  if a:active
+		    ... do something
+		  else
+		    ... do something
+		  endif
+		  " return value is not used
+		endfunction
+		set imactivatefunc=ImActivateFunc
+<
 						*'imactivatekey'* *'imak'*
 'imactivatekey' 'imak'	string (default "")
 			global
@@ -4089,6 +4112,24 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The value 0 may not work correctly with Athena and Motif with some XIM
 	methods.  Use 'imdisable' to disable XIM then.
 
+						*'imstatusfunc'* *'imsf'*
+'imstatusfunc' 'imsf'	string (default "")
+			global
+			{not in Vi}
+			{only available when compiled with |+xim| and
+			|+GUI_GTK|}
+	This option specifies a function that is called to obtain the status
+	of Input Method.  It must return a positive number when IME is active.
+
+	Example: >
+		function ImStatusFunc()
+		  let is_active = ...do something
+		  return is_active ? 1 : 0
+		endfunction
+		set imstatusfunc=ImStatusFunc
+<
+	NOTE: This function is invoked very often.  Keep it fast.
+
 						*'include'* *'inc'*
 'include' 'inc'		string	(default "^\s*#\s*include")
 			global or local to buffer |global-local|
@@ -4605,7 +4646,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The cursor is displayed at the start of the space a Tab character
 	occupies, not at the end as usual in Normal mode.  To get this cursor
 	position while displaying Tabs with spaces, use: >
-		:set list lcs=tab\ \ 
+		:set list lcs=tab:\ \ 
 <
 	Note that list mode will also affect formatting (set with 'textwidth'
 	or 'wrapmargin') when 'cpoptions' includes 'L'.  See 'listchars' for
@@ -6713,7 +6754,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	V N   Virtual column number as -{num}.  Not displayed if equal to 'c'.
 	p N   Percentage through file in lines as in |CTRL-G|.
 	P S   Percentage through file of displayed window.  This is like the
-	      percentage described for 'ruler'.  Always 3 in length.
+	      percentage described for 'ruler'.  Always 3 in length, unless
+	      translated.
 	a S   Argument list status as in default title.  ({current} of {max})
 	      Empty if the argument file count is zero or one.
 	{ NF  Evaluate expression between '%{' and '}' and substitute result.
@@ -7821,8 +7863,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	if the line was empty.  But it is far from Vi compatible.  It may also
 	break some plugins or Vim scripts.  For example because |l| can move
 	the cursor after the last character.  Use with care!
-	Using the |$| command will move to the last character in the line, not
+	Using the `$` command will move to the last character in the line, not
 	past it.  This may actually move the cursor to the left!
+	The `g$` command will move to the end of the screen line.
 	It doesn't make sense to combine "all" with "onemore", but you will
 	not get a warning for it.
 

runtime/doc/os_390.txt

@@ -1,4 +1,4 @@
-*os_390.txt*    For Vim version 7.3.  Last change: 2010 May 30
+*os_390.txt*    For Vim version 7.4b.  Last change: 2010 May 30
 
 
 		  VIM REFERENCE MANUAL	  by Ralf Schandl

runtime/doc/os_amiga.txt

@@ -1,4 +1,4 @@
-*os_amiga.txt*  For Vim version 7.3.  Last change: 2010 Aug 14
+*os_amiga.txt*  For Vim version 7.4b.  Last change: 2010 Aug 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_beos.txt

@@ -1,4 +1,4 @@
-*os_beos.txt*	For Vim version 7.3.  Last change: 2010 Aug 14
+*os_beos.txt*	For Vim version 7.4b.  Last change: 2010 Aug 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_dos.txt

@@ -1,4 +1,4 @@
-*os_dos.txt*    For Vim version 7.3.  Last change: 2006 Mar 30
+*os_dos.txt*    For Vim version 7.4b.  Last change: 2006 Mar 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_mac.txt

@@ -1,4 +1,4 @@
-*os_mac.txt*    For Vim version 7.3.  Last change: 2006 Apr 30
+*os_mac.txt*    For Vim version 7.4b.  Last change: 2006 Apr 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar et al.

runtime/doc/os_mint.txt

@@ -1,4 +1,4 @@
-*os_mint.txt*   For Vim version 7.3.  Last change: 2005 Mar 29
+*os_mint.txt*   For Vim version 7.4b.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Jens M. Felderhoff

runtime/doc/os_msdos.txt

@@ -1,4 +1,4 @@
-*os_msdos.txt*  For Vim version 7.3.  Last change: 2005 Mar 29
+*os_msdos.txt*  For Vim version 7.4b.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_os2.txt

@@ -1,4 +1,4 @@
-*os_os2.txt*    For Vim version 7.3.  Last change: 2007 Apr 22
+*os_os2.txt*    For Vim version 7.4b.  Last change: 2007 Apr 22
 
 
 		  VIM REFERENCE MANUAL    by Paul Slootman

runtime/doc/os_qnx.txt

@@ -1,4 +1,4 @@
-*os_qnx.txt*    For Vim version 7.3.  Last change: 2005 Mar 29
+*os_qnx.txt*    For Vim version 7.4b.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Julian Kinraid

runtime/doc/os_risc.txt

@@ -1,4 +1,4 @@
-*os_risc.txt*   For Vim version 7.3.  Last change: 2011 May 10
+*os_risc.txt*   For Vim version 7.4b.  Last change: 2011 May 10
 
 
 		  VIM REFERENCE MANUAL    by Thomas Leonard

runtime/doc/os_unix.txt

@@ -1,4 +1,4 @@
-*os_unix.txt*   For Vim version 7.3.  Last change: 2005 Mar 29
+*os_unix.txt*   For Vim version 7.4b.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/os_vms.txt

@@ -1,4 +1,4 @@
-*os_vms.txt*    For Vim version 7.3.  Last change: 2011 Aug 14
+*os_vms.txt*    For Vim version 7.4b.  Last change: 2011 Aug 14
 
 
 		  VIM REFERENCE MANUAL

runtime/doc/os_win32.txt

@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 7.3.  Last change: 2012 May 18
+*os_win32.txt*  For Vim version 7.4b.  Last change: 2012 May 18
 
 
 		  VIM REFERENCE MANUAL    by George Reilly

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 7.3.  Last change: 2013 Jun 02
+*pattern.txt*   For Vim version 7.4b.  Last change: 2013 Jul 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -350,7 +350,7 @@ For starters, read chapter 27 of the user manual |usr_27.txt|.
 		or  \z( pattern \)		|/\z(|
 
 
-				*/\%#=* *two-engines*
+				*/\%#=* *two-engines* *NFA*
 Vim includes two regexp engines:
 1. An old, backtracking engine that supports everything.
 2. A new, NFA engine that works much faster on some patterns, but does not

runtime/doc/pi_getscript.txt

@@ -1,4 +1,4 @@
-*pi_getscript.txt*  For Vim version 7.0.  Last change: 2012 Apr 07
+*pi_getscript.txt*  For Vim version 7.4b.  Last change: 2012 Apr 07
 >
 		GETSCRIPT REFERENCE MANUAL  by Charles E. Campbell
 <

runtime/doc/pi_gzip.txt

@@ -1,4 +1,4 @@
-*pi_gzip.txt*   For Vim version 7.3.  Last change: 2012 Jul 19
+*pi_gzip.txt*   For Vim version 7.4b.  Last change: 2012 Jul 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/pi_netrw.txt

@@ -1,4 +1,4 @@
-*pi_netrw.txt*  For Vim version 7.3.  Last change: 2013 May 18
+*pi_netrw.txt*  For Vim version 7.4b.  Last change: 2013 May 18
 
 	    ------------------------------------------------
 	    NETRW REFERENCE MANUAL    by Charles E. Campbell

runtime/doc/pi_paren.txt

@@ -1,4 +1,4 @@
-*pi_paren.txt*  For Vim version 7.3.  Last change: 2013 May 08
+*pi_paren.txt*  For Vim version 7.4b.  Last change: 2013 May 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar

runtime/doc/pi_spec.txt

@@ -1,4 +1,4 @@
-*pi_spec.txt*   For Vim version 7.3.  Last change: 2006 Apr 24
+*pi_spec.txt*   For Vim version 7.4b.  Last change: 2006 Apr 24
 
 by Gustavo Niemeyer ~
 

runtime/doc/pi_tar.txt

@@ -1,4 +1,4 @@
-*pi_tar.txt*	For Vim version 7.3.  Last change: 2013 Apr 17
+*pi_tar.txt*	For Vim version 7.4b.  Last change: 2013 Apr 17
 
 		       +====================+
 		       | Tar File Interface |

runtime/doc/pi_vimball.txt

@@ -1,4 +1,4 @@
-*pi_vimball.txt*	For Vim version 7.3.  Last change: 2012 Jan 17
+*pi_vimball.txt*	For Vim version 7.4b.  Last change: 2012 Jan 17
 
 			       ----------------
 			       Vimball Archiver

runtime/doc/pi_zip.txt

@@ -1,4 +1,4 @@
-*pi_zip.txt*	For Vim version 7.3.  Last change: 2013 Apr 17
+*pi_zip.txt*	For Vim version 7.4b.  Last change: 2013 Apr 17
 
 				+====================+
 				| Zip File Interface |