patch 7.4.768

Problem:    :diffoff only works properly once.
Solution:   Also make :diffoff work when used a second time. (Olaf Dabrunz)

.gitignore

@@ -36,6 +36,18 @@ src/Obj*/pathdef.c
 gvimext.dll
 gvimext.lib
 
+# Borland C++
+bcc.cfg
+*.ilc
+*.ild
+*.ilf
+*.ils
+*.map
+*.tds
+
+# NetBeans
+nbproject/*
+
 # Mac OSX
 src/xxd/xxd.dSYM
 
@@ -46,14 +58,18 @@ src/xxd/xxd.dSYM
 *.swp
 *~
 *.pyc
+*.log
 src/po/vim.pot
 
 # Generated by "make test"
-src/po/*.ck 
-src/testdir/mbyte.vim 
-src/testdir/mzscheme.vim 
-src/testdir/lua.vim 
-src/testdir/small.vim 
-src/testdir/tiny.vim 
+src/po/*.ck
+src/testdir/mbyte.vim
+src/testdir/mzscheme.vim
+src/testdir/lua.vim
+src/testdir/small.vim
+src/testdir/tiny.vim
 src/testdir/test*.out
+src/testdir/test*.failed
 src/testdir/test.log
+src/testdir/dostmp/*
+src/memfile_test

Filelist

@@ -3,6 +3,7 @@
 
 # source files for all source archives
 SRC_ALL =	\
+		.hgignore \
 		src/README.txt \
 		src/arabic.c \
 		src/arabic.h \
@@ -10,6 +11,8 @@ SRC_ALL =	\
 		src/blowfish.c \
 		src/buffer.c \
 		src/charset.c \
+		src/crypt.c \
+		src/crypt_zip.c \
 		src/diff.c \
 		src/digraph.c \
 		src/edit.c \
@@ -79,11 +82,17 @@ SRC_ALL =	\
 		src/xxd/xxd.c \
 		src/main.aap \
 		src/testdir/main.aap \
+		src/testdir/README.txt \
 		src/testdir/*.in \
+		src/testdir/sautest/autoload/*.vim \
 		src/testdir/test[0-9]*.ok \
+		src/testdir/test[0-9]*a.ok \
+		src/testdir/test_[a-z]*.ok \
 		src/testdir/test49.vim \
 		src/testdir/test60.vim \
 		src/testdir/test83-tags? \
+		src/testdir/test77a.com \
+		src/testdir/test_*.vim \
 		src/testdir/python2/*.py \
 		src/testdir/python3/*.py \
 		src/testdir/pythonx/*.py \
@@ -93,10 +102,15 @@ SRC_ALL =	\
 		src/testdir/pythonx/topmodule/submodule/subsubmodule/subsubsubmodule.py \
 		src/testdir/python_after/*.py \
 		src/testdir/python_before/*.py \
+		src/testdir/bench*.in \
+		src/testdir/bench*.vim \
+		src/testdir/samples/*.txt \
 		src/proto.h \
 		src/proto/blowfish.pro \
 		src/proto/buffer.pro \
 		src/proto/charset.pro \
+		src/proto/crypt.pro \
+		src/proto/crypt_zip.pro \
 		src/proto/diff.pro \
 		src/proto/digraph.pro \
 		src/proto/edit.pro \
@@ -266,6 +280,7 @@ SRC_DOS =	\
 		src/Make_bc3.mak \
 		src/Make_bc5.mak \
 		src/Make_cyg.mak \
+		src/Make_cyg_ming.mak \
 		src/Make_djg.mak \
 		src/Make_ivc.mak \
 		src/Make_dvc.mak \
@@ -283,6 +298,8 @@ SRC_DOS =	\
 		src/dosinst.h \
 		src/glbl_ime.cpp \
 		src/glbl_ime.h \
+		src/gui_dwrite.cpp \
+		src/gui_dwrite.h \
 		src/gui_w16.c \
 		src/gui_w32.c \
 		src/gui_w48.c \

README.txt

@@ -110,6 +110,3 @@ MAIN AUTHOR
 Send any other comments, patches, flowers and suggestions to:
 
 	Bram Moolenaar		E-mail:	Bram@vim.org
-	Finsterruetihof 1
-	8134 Adliswil
-	Switzerland

nsis/gvim.nsi

@@ -1,6 +1,6 @@
 # NSIS file to create a self-installing exe for Vim.
 # It requires NSIS version 2.0 or later.
-# Last Change:	2010 Jul 30
+# Last Change:	2014 Nov 5
 
 # WARNING: if you make changes to this script, look out for $0 to be valid,
 # because uninstall deletes most files in $0.
@@ -38,7 +38,7 @@ SetDatablockOptimize on
 RequestExecutionLevel highest
 
 ComponentText "This will install Vim ${VER_MAJOR}.${VER_MINOR} on your computer."
-DirText "Choose a directory to install Vim (must end in 'vim')"
+DirText "Choose a directory to install Vim (should contain 'vim')"
 Icon icons\vim_16c.ico
 # NSIS2 uses a different strategy with six different images in a strip...
 #EnabledBitmap icons\enabled.bmp
@@ -135,11 +135,6 @@ FunctionEnd
 # We only accept the directory if it ends in "vim".  Using .onVerifyInstDir has
 # the disadvantage that the browse dialog is difficult to use.
 Function CheckInstallDir
-  StrCpy $0 $INSTDIR 3 -3
-  StrCmp $0 "vim" PathGood
-    MessageBox MB_OK "The path must end in 'vim'."
-    Abort
-  PathGood:
 FunctionEnd
 
 Function .onInstSuccess

runtime/autoload/getscript.vim

@@ -1,8 +1,8 @@
 " ---------------------------------------------------------------------
 " getscript.vim
 "  Author:	Charles E. Campbell
-"  Date:	Apr 17, 2013
-"  Version:	35
+"  Date:	Jan 21, 2014
+"  Version:	36
 "  Installing:	:help glvs-install
 "  Usage:	:help glvs
 "
@@ -15,7 +15,7 @@
 if exists("g:loaded_getscript")
  finish
 endif
-let g:loaded_getscript= "v35"
+let g:loaded_getscript= "v36"
 if &cp
  echoerr "GetLatestVimScripts is not vi-compatible; not loaded (you need to set nocp)"
  finish
@@ -208,8 +208,8 @@ fun! getscript#GetLatestVimScripts()
   let lastline    = line("$")
 "  call Decho("lastline#".lastline)
   let firstdir    = substitute(&rtp,',.*$','','')
-  let plugins     = split(globpath(firstdir,"plugin/*.vim"),'\n')
-  let plugins     = plugins + split(globpath(firstdir,"AsNeeded/*.vim"),'\n')
+  let plugins     = split(globpath(firstdir,"plugin/**/*.vim"),'\n')
+  let plugins     = plugins + split(globpath(firstdir,"AsNeeded/**/*.vim"),'\n')
   let foundscript = 0
 
   " this loop updates the GetLatestVimScripts.dat file

runtime/autoload/gzip.vim

@@ -1,6 +1,6 @@
 " Vim autoload file for editing compressed files.
 " Maintainer: Bram Moolenaar <Bram@vim.org>
-" Last Change: 2008 Jul 04
+" Last Change: 2014 Nov 05
 
 " These functions are used by the gzip plugin.
 
@@ -120,6 +120,8 @@ fun gzip#read(cmd)
     silent! exe "bwipe " . tmp_esc
     silent! exe "bwipe " . tmpe_esc
   endif
+  " Store the OK flag, so that we can use it when writing.
+  let b:uncompressOk = ok
 
   " Restore saved option values.
   let &pm = pm_save
@@ -146,8 +148,10 @@ endfun
 
 " After writing compressed file: Compress written file with "cmd"
 fun gzip#write(cmd)
+  if exists('b:uncompressOk') && !b:uncompressOk
+    echomsg "Not compressing file because uncompress failed; reset b:uncompressOk to compress anyway"
   " don't do anything if the cmd is not supported
-  if s:check(a:cmd)
+  elseif s:check(a:cmd)
     " Rename the file before compressing it.
     let nm = resolve(expand("<afile>"))
     let nmt = s:tempname(nm)

runtime/autoload/htmlcomplete.vim

@@ -1,7 +1,49 @@
 " Vim completion script
 " Language:	HTML and XHTML
 " Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2011 Apr 28
+" Last Change:	2014 Jun 20
+
+" Distinguish between HTML versions.
+" To use with other HTML versions add another "elseif" condition to match
+" proper DOCTYPE.
+function! htmlcomplete#DetectOmniFlavor()
+  if &filetype == 'xhtml'
+    let b:html_omni_flavor = 'xhtml10s'
+  else
+    let b:html_omni_flavor = 'html401t'
+  endif
+  let i = 1
+  let line = ""
+  while i < 10 && i < line("$")
+    let line = getline(i)
+    if line =~ '<!DOCTYPE.*\<DTD '
+      break
+    endif
+    let i += 1
+  endwhile
+  if line =~ '<!DOCTYPE.*\<DTD '  " doctype line found above
+    if line =~ ' HTML 3\.2'
+      let b:html_omni_flavor = 'html32'
+    elseif line =~ ' XHTML 1\.1'
+      let b:html_omni_flavor = 'xhtml11'
+    else    " two-step detection with strict/frameset/transitional
+      if line =~ ' XHTML 1\.0'
+	let b:html_omni_flavor = 'xhtml10'
+      elseif line =~ ' HTML 4\.01'
+	let b:html_omni_flavor = 'html401'
+      elseif line =~ ' HTML 4.0\>'
+	let b:html_omni_flavor = 'html40'
+      endif
+      if line =~ '\<Transitional\>'
+	let b:html_omni_flavor .= 't'
+      elseif line =~ '\<Frameset\>'
+	let b:html_omni_flavor .= 'f'
+      else
+	let b:html_omni_flavor .= 's'
+      endif
+    endif
+  endif
+endfunction
 
 function! htmlcomplete#CompleteTags(findstart, base)
   if a:findstart

runtime/autoload/netrwSettings.vim

@@ -1,7 +1,7 @@
 " netrwSettings.vim: makes netrw settings simpler
-" Date:		May 03, 2013
+" Date:		Dec 30, 2014
 " Maintainer:	Charles E Campbell <drchipNOSPAM at campbellfamily dot biz>
-" Version:	14a	ASTRO-ONLY
+" Version:	15
 " Copyright:    Copyright (C) 1999-2007 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
 "               with or without modifications, provided that this copyright
@@ -19,7 +19,7 @@
 if exists("g:loaded_netrwSettings") || &cp
   finish
 endif
-let g:loaded_netrwSettings = "v14a"
+let g:loaded_netrwSettings = "v15"
 if v:version < 700
  echohl WarningMsg
  echo "***warning*** this version of netrwSettings needs vim 7.0"
@@ -31,7 +31,7 @@ endif
 " NetrwSettings: {{{1
 fun! netrwSettings#NetrwSettings()
   " this call is here largely just to insure that netrw has been loaded
-  call netrw#NetrwSavePosn()
+  call netrw#SavePosn()
   if !exists("g:loaded_netrw")
    echohl WarningMsg | echomsg "***sorry*** netrw needs to be loaded prior to using NetrwSettings" | echohl None
    return
@@ -98,6 +98,11 @@ fun! netrwSettings#NetrwSettings()
 
   put = ''
   put ='+ Netrw Browser Control'
+  if exists("g:netrw_altfile")
+   put = 'let g:netrw_altfile   = '.g:netrw_altfile
+  else
+   put = 'let g:netrw_altfile   = 0'
+  endif
   put = 'let g:netrw_alto              = '.g:netrw_alto
   put = 'let g:netrw_altv              = '.g:netrw_altv
   put = 'let g:netrw_banner            = '.g:netrw_banner
@@ -172,6 +177,7 @@ fun! netrwSettings#NetrwSettings()
   put = 'let g:netrw_sort_direction    = '.g:netrw_sort_direction
   put = 'let g:netrw_sort_options      = '.g:netrw_sort_options
   put = 'let g:netrw_sort_sequence     = '.g:netrw_sort_sequence
+  put = 'let g:netrw_servername        = '.g:netrw_servername
   put = 'let g:netrw_special_syntax    = '.g:netrw_special_syntax
   put = 'let g:netrw_ssh_browse_reject = '.g:netrw_ssh_browse_reject
   put = 'let g:netrw_ssh_cmd           = '.g:netrw_ssh_cmd

runtime/autoload/netrw_gitignore.vim

@@ -0,0 +1,78 @@
+" netrw_gitignore#Hide: gitignore-based hiding
+"  Function returns a string of comma separated patterns convenient for
+"  assignment to `g:netrw_list_hide` option.
+"  Function can take additional filenames as arguments, example:
+"  netrw_gitignore#Hide('custom_gitignore1', 'custom_gitignore2')
+"
+" Usage examples:
+"  let g:netrw_list_hide = netrw_gitignore#Hide()
+"  let g:netrw_list_hide = netrw_gitignore#Hide() . 'more,hide,patterns'
+"
+" Copyright:    Copyright (C) 2013 Bruno Sutic {{{1
+"               Permission is hereby granted to use and distribute this code,
+"               with or without modifications, provided that this copyright
+"               notice is copied with it. Like anything else that's free,
+"               netrw_gitignore.vim is provided *as is* and comes with no
+"               warranty of any kind, either expressed or implied. By using
+"               this plugin, you agree that in no event will the copyright
+"               holder be liable for any damages resulting from the use
+"               of this software.
+function! netrw_gitignore#Hide(...)
+  let additional_files = a:000
+
+  let default_files = ['.gitignore', '.git/info/exclude']
+
+  " get existing global/system gitignore files
+  let global_gitignore = expand(substitute(system("git config --global core.excludesfile"), '\n', '', 'g'))
+  if global_gitignore !=# ''
+    let default_files = add(default_files, global_gitignore)
+  endif
+  let system_gitignore = expand(substitute(system("git config --system core.excludesfile"), '\n', '', 'g'))
+  if system_gitignore !=# ''
+    let default_files = add(default_files, system_gitignore)
+  endif
+
+  " append additional files if given as function arguments
+  if additional_files !=# []
+    let files = extend(default_files, additional_files)
+  else
+    let files = default_files
+  endif
+
+  " keep only existing/readable files
+  let gitignore_files = []
+  for file in files
+    if filereadable(file)
+      let gitignore_files = add(gitignore_files, file)
+    endif
+  endfor
+
+  " get contents of gitignore patterns from those files
+  let gitignore_lines = []
+  for file in gitignore_files
+    for line in readfile(file)
+      " filter empty lines and comments
+      if line !~# '^#' && line !~# '^$'
+        let gitignore_lines = add(gitignore_lines, line)
+      endif
+    endfor
+  endfor
+
+  " convert gitignore patterns to Netrw/Vim regex patterns
+  let escaped_lines = []
+  for line in gitignore_lines
+    let escaped = line
+    let escaped = substitute(escaped, '\*\*', '*', 'g')
+    let escaped = substitute(escaped, '\.', '\\.', 'g')
+    let escaped = substitute(escaped, '\$', '\\$', 'g')
+    let escaped = substitute(escaped, '*', '.*', 'g')
+    " correction: dot, dollar and asterisks chars shouldn't be escaped when
+    " within regex matching groups.
+    let escaped = substitute(escaped, '\(\[[^]]*\)\zs\\\.', '\.', 'g')
+    let escaped = substitute(escaped, '\(\[[^]]*\)\zs\\\$', '\$', 'g')
+    let escaped = substitute(escaped, '\(\[[^]]*\)\zs\.\*', '*', 'g')
+    let escaped_lines = add(escaped_lines, escaped)
+  endfor
+
+  return join(escaped_lines, ',')
+endfunction

runtime/colors/README.txt

@@ -36,6 +36,14 @@ Some attributes (e.g., bold) might be set in the defaults that you want
 removed in your color scheme.  Use something like "gui=NONE" to remove the
 attributes.
 
+In case you want to set 'background' depending on the colorscheme selected,
+this autocmd might be useful:
+     autocmd SourcePre */colors/blue_sky.vim set background=dark
+Replace "blue_sky" with the name of the colorscheme.
+
+In case you want to tweak a colorscheme after it was loaded, check out that
+ColorScheme autocmd event.
+
 To see which highlight group is used where, find the help for
 "highlight-groups" and "group-name".
 

runtime/colors/delek.vim

@@ -1,10 +1,10 @@
 " Vim color file
-" Maintainer:	David Schweikert <dws@ee.ethz.ch>
-" Last Change:	2006 Apr 30
+" Maintainer:	David Schweikert <david@schweikert.ch>
+" Last Change:	2014 Mar 19
 
 hi clear
 
-let colors_name = "delek"
+let g:colors_name = "delek"
 
 " Normal should come first
 hi Normal     guifg=Black  guibg=White
@@ -28,7 +28,11 @@ hi NonText    ctermfg=Blue	   gui=bold guifg=gray guibg=white
 hi Pmenu      guibg=LightBlue
 hi PmenuSel   ctermfg=White	   ctermbg=DarkBlue  guifg=White  guibg=DarkBlue
 hi Question   ctermfg=DarkGreen    gui=bold guifg=SeaGreen
-hi Search     ctermfg=NONE	   ctermbg=Yellow guibg=Yellow guifg=NONE
+if &background == "light"
+    hi Search     ctermfg=NONE	   ctermbg=Yellow guibg=Yellow guifg=NONE
+else
+    hi Search     ctermfg=Black	   ctermbg=Yellow guibg=Yellow guifg=Black
+endif
 hi SpecialKey ctermfg=DarkBlue	   guifg=Blue
 hi StatusLine cterm=bold	   ctermbg=blue ctermfg=yellow guibg=gold guifg=blue
 hi StatusLineNC	cterm=bold	   ctermbg=blue ctermfg=black  guibg=gold guifg=blue

runtime/colors/industry.vim

@@ -0,0 +1,40 @@
+" Vim color file
+" Maintainer:	Shian Lee 
+" Last Change:	2014 Mar 6 (for vim 7.4)
+" Remark:	"industry" stands for 'industrial' color scheme. In industrial
+"		HMI (Human-Machine-Interface) programming, using a standard color
+"               scheme is mandatory in many cases (in traffic-lights for example): 
+"               LIGHT_RED is	    'Warning' 
+"               LIGHT_YELLOW is	    'Attention' 
+"               LIGHT_GREEN is	    'Normal' 
+"               LIGHT_MAGENTA is    'Warning-Attention' (light RED-YELLOW)
+"               LIGHT_CYAN is	    'Attention-Normal'  (light YELLOW-GREEN).
+"               BLACK is	    Dark-High-Contrast Background for maximum safety.
+"               BLUE is		    Shade of BLACK (not supposed to get attention).
+"
+"               Industrial color scheme is by nature clear, safe and productive. 
+"               Yet, depends on the file type's syntax, it might appear incorrect. 
+
+" Reset to dark background, then reset everything to defaults:
+set background=dark
+highlight clear
+if exists("syntax_on")
+    syntax reset
+endif
+
+let colors_name = "industry"
+
+" First set Normal to regular white on black text colors:
+hi Normal ctermfg=LightGray ctermbg=Black guifg=#dddddd	guibg=Black
+
+" Syntax highlighting (other color-groups using default, see :help group-name):
+hi Comment    cterm=NONE ctermfg=DarkCyan    	gui=NONE guifg=#00aaaa   	 
+hi Constant   cterm=NONE ctermfg=LightCyan   	gui=NONE guifg=#00ffff   	
+hi Identifier cterm=NONE ctermfg=LightMagenta   gui=NONE guifg=#ff00ff   
+hi Function   cterm=NONE ctermfg=LightGreen   	gui=NONE guifg=#00ff00   	
+hi Statement  cterm=NONE ctermfg=White	     	gui=bold guifg=#ffffff	     	
+hi PreProc    cterm=NONE ctermfg=Yellow		gui=NONE guifg=#ffff00 	
+hi Type	      cterm=NONE ctermfg=LightGreen	gui=bold guifg=#00ff00 		
+hi Special    cterm=NONE ctermfg=LightRed    	gui=NONE guifg=#ff0000    	
+hi Delimiter  cterm=NONE ctermfg=Yellow    	gui=NONE guifg=#ffff00    	
+

runtime/compiler/gcc.vim

@@ -25,10 +25,10 @@ CompilerSet errorformat=
       \%f:%l:\ %tarning:\ %m,
       \%f:%l:\ %m,
       \\"%f\"\\,\ line\ %l%*\\D%c%*[^\ ]\ %m,
-      \%D%*\\a[%*\\d]:\ Entering\ directory\ `%f',
-      \%X%*\\a[%*\\d]:\ Leaving\ directory\ `%f',
-      \%D%*\\a:\ Entering\ directory\ `%f',
-      \%X%*\\a:\ Leaving\ directory\ `%f',
+      \%D%*\\a[%*\\d]:\ Entering\ directory\ [`']%f',
+      \%X%*\\a[%*\\d]:\ Leaving\ directory\ [`']%f',
+      \%D%*\\a:\ Entering\ directory\ [`']%f',
+      \%X%*\\a:\ Leaving\ directory\ [`']%f',
       \%DMaking\ %*\\a\ in\ %f
 
 if exists('g:compiler_gcc_ignore_unmatched_lines')

runtime/compiler/go.vim

@@ -0,0 +1,29 @@
+" Vim compiler file
+" Compiler:	Go
+" Maintainer:	David Barnett (https://github.com/google/vim-ft-go)
+" Last Change:	2014 Aug 16
+
+if exists('current_compiler')
+  finish
+endif
+let current_compiler = 'go'
+
+if exists(':CompilerSet') != 2
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:save_cpo = &cpo
+set cpo-=C
+
+CompilerSet makeprg=go\ build
+CompilerSet errorformat=
+    \%-G#\ %.%#,
+    \%A%f:%l:%c:\ %m,
+    \%A%f:%l:\ %m,
+    \%C%*\\s%m,
+    \%-G%.%#
+
+let &cpo = s:save_cpo
+unlet s:save_cpo
+
+" vim: sw=2 sts=2 et

runtime/compiler/msvc.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:	Miscrosoft Visual C
+" Compiler:	Microsoft Visual C
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2005 Nov 30
+" Last Change:	2014 Sep 20
 
 if exists("current_compiler")
   finish

runtime/doc/Makefile

@@ -75,6 +75,7 @@ DOCS = \
 	pattern.txt \
 	pi_getscript.txt \
 	pi_gzip.txt \
+	pi_logipat.txt \
 	pi_netrw.txt \
 	pi_paren.txt \
 	pi_spec.txt \
@@ -207,6 +208,7 @@ HTMLS = \
 	pattern.html \
 	pi_getscript.html \
 	pi_gzip.html \
+	pi_logipat.html \
 	pi_netrw.html \
 	pi_paren.html \
 	pi_spec.html \
@@ -229,7 +231,6 @@ HTMLS = \
 	starting.html \
 	syntax.html \
 	tabpage.html \
-	tags.html \
 	tagsrch.html \
 	term.html \
 	tips.html \

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 7.4.  Last change: 2013 Aug 04
+*autocmd.txt*   For Vim version 7.4.  Last change: 2015 Mar 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -278,6 +278,7 @@ Name			triggered by ~
 |ShellCmdPost|		after executing a shell command
 |ShellFilterPost|	after filtering with a shell command
 
+|CmdUndefined|		a user command is used but it isn't defined
 |FuncUndefined|		a user function is used but it isn't defined
 |SpellFileMissing|	a spell file is used but it can't be found
 |SourcePre|		before sourcing a Vim script
@@ -304,6 +305,9 @@ Name			triggered by ~
 |InsertCharPre|		when a character was typed in Insert mode, before
 			inserting it
 
+|TextChanged|		after a change was made to the text in Normal mode
+|TextChangedI|		after a change was made to the text in Insert mode
+
 |ColorScheme|		after loading a color scheme
 
 |RemoteReply|		a reply from a server Vim was received
@@ -462,6 +466,16 @@ BufWriteCmd			Before writing the whole buffer to a file.
 							*BufWritePost*
 BufWritePost			After writing the whole buffer to a file
 				(should undo the commands for BufWritePre).
+							*CmdUndefined*
+CmdUndefined			When a user command is used but it isn't
+				defined.  Useful for defining a command only
+				when it's used.  The pattern is matched
+				against the command name.  Both <amatch> and
+				<afile> are set to the name of the command.
+				NOTE: Autocompletion won't work until the
+				command is defined.  An alternative is to
+				always define the user command and have it
+				invoke an autoloaded function.  See |autoload|.
 							*CmdwinEnter*
 CmdwinEnter			After entering the command-line window.
 				Useful for setting options specifically for
@@ -480,6 +494,12 @@ CmdwinLeave			Before leaving the command-line window.
 				|cmdwin-char|
 							*ColorScheme*
 ColorScheme			After loading a color scheme. |:colorscheme|
+				The pattern is matched against the
+				colorscheme name. <afile> can be used for the
+				name of the actual file where this option was
+				set, and <amatch> for the new colorscheme
+				name.
+
 
 							*CompleteDone*
 CompleteDone			After Insert mode completion is done.  Either
@@ -499,6 +519,11 @@ CursorHold			When the user doesn't press a key for the time
 				operator.
 				While recording the CursorHold event is not
 				triggered. |q|
+							*<CursorHold>*
+				Internally the autocommand is triggered by the
+				<CursorHold> key. In an expression mapping
+				|getchar()| may see this character.
+
 				Note: Interactive commands cannot be used for
 				this event.  There is no hit-enter prompt,
 				the screen is updated directly (when needed).
@@ -553,11 +578,15 @@ FileChangedRO			Before making the first change to a read-only
 				It is not allowed to change to another buffer
 				here.  You can reload the buffer but not edit
 				another one.
+							*E881*
+				If the number of lines changes saving for undo
+				may fail and the change will be aborted.
 							*FileChangedShell*
 FileChangedShell		When Vim notices that the modification time of
 				a file has changed since editing started.
 				Also when the file attributes of the file
-				change. |timestamp|
+				change or when the size of the file changes.
+				|timestamp|
 				Mostly triggered after executing a shell
 				command, but also with a |:checktime| command
 				or when Gvim regains input focus.
@@ -657,6 +686,8 @@ FuncUndefined			When a user function is used but it isn't
 				when it's used.  The pattern is matched
 				against the function name.  Both <amatch> and
 				<afile> are set to the name of the function.
+				NOTE: When writing Vim scripts a better
+				alternative is to use an autoloaded function.
 				See |autoload-functions|.
 							*GUIEnter*
 GUIEnter			After starting the GUI successfully, and after
@@ -731,7 +762,7 @@ QuickFixCmdPost			Like QuickFixCmdPre, but after a quickfix
 				command is run, before jumping to the first
 				location. For |:cfile| and |:lfile| commands
 				it is run after error file is read and before
-				moving to the first error. 
+				moving to the first error.
 				See |QuickFixCmdPost-example|.
 							*QuitPre*
 QuitPre				When using `:quit`, `:wq` or `:qall`, before
@@ -902,6 +933,13 @@ WinLeave			Before leaving a window.  If the window to be
 ==============================================================================
 6. Patterns					*autocmd-patterns* *{pat}*
 
+The {pat} argument can be a comma separated list.  This works as if the
+command was given with each pattern separately.  Thus this command: >
+	:autocmd BufRead *.txt,*.info set et
+Is equivalent to: >
+	:autocmd BufRead *.txt set et
+	:autocmd BufRead *.info set et
+
 The file pattern {pat} is tested for a match against the file name in one of
 two ways:
 1. When there is no '/' in the pattern, Vim checks for a match against only

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 7.4.  Last change: 2013 Aug 25
+*change.txt*    For Vim version 7.4.  Last change: 2015 Jun 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -156,6 +156,9 @@ only after a '.').
 The 'B' and 'M' flags in 'formatoptions' change the behavior for inserting
 spaces before and after a multi-byte character |fo-table|.
 
+The '[ mark is set at the end of the first line that was joined, '] at the end
+of the resulting line.
+
 
 ==============================================================================
 2. Delete and insert				*delete-insert* *replacing*
@@ -376,10 +379,43 @@ Adding and subtracting ~
 CTRL-A			Add [count] to the number or alphabetic character at
 			or after the cursor.  {not in Vi}
 
+							*v_CTRL-A*
+{Visual}CTRL-A		Add [count] to the number or alphabetic character in
+			the highlighted text.  {not in Vi}
+
+							*v_g_CTRL-A*
+{Visual}g CTRL-A	Add [count] to the number or alphabetic character in
+			the highlighted text. If several lines are
+		        highlighted, each one will be incremented by an
+			additional [count] (so effectively creating a
+			[count] incrementing sequence).  {not in Vi}
+			For Example, if you have this list of numbers:
+				1. ~
+				1. ~
+				1. ~
+				1. ~
+			Move to the second "1." and Visually select three
+			lines, pressing g CTRL-A results in:
+				1. ~
+				2. ~
+				3. ~
+				4. ~
+
 							*CTRL-X*
 CTRL-X			Subtract [count] from the number or alphabetic
 			character at or after the cursor.  {not in Vi}
 
+							*v_CTRL-X*
+{Visual}CTRL-X		Subtract [count] from the number or alphabetic
+			character in the highlighted text.  {not in Vi}
+
+							*v_g_CTRL-X*
+{Visual}g CTRL-X	Subtract [count] from the number or alphabetic
+			character in the highlighted text. If several lines
+			are highlighted, each value will be decremented by an
+			additional [count] (so effectively creating a [count]
+			decrementing sequence).  {not in Vi}
+
 The CTRL-A and CTRL-X commands work for (signed) decimal numbers, unsigned
 octal and hexadecimal numbers and alphabetic characters.  This depends on the
 'nrformats' option.
@@ -396,6 +432,10 @@ octal and hexadecimal numbers and alphabetic characters.  This depends on the
   under or after the cursor.  This is useful to make lists with an alphabetic
   index.
 
+For decimals a leading negative sign is considered for incrementing/
+decrementing, for octal and hex values, it won't be considered.
+To ignore the sign Visually select the number before using CTRL-A or CTRL-X. 
+
 For numbers with leading zeros (including all octal and hexadecimal numbers),
 Vim preserves the number of characters in the number when possible.  CTRL-A on
 "0077" results in "0100", CTRL-X on "0x100" results in "0x0ff".
@@ -475,8 +515,8 @@ If the 'shiftround' option is on, the indent is rounded to a multiple of
 'shiftwidth'.
 
 If the 'smartindent' option is on, or 'cindent' is on and 'cinkeys' contains
-'#', shift right does not affect lines starting with '#' (these are supposed
-to be C preprocessor lines that must stay in column 1).
+'#' with a zero value, shift right does not affect lines starting with '#'
+(these are supposed to be C preprocessor lines that must stay in column 1).
 
 When the 'expandtab' option is off (this is the default) Vim uses <Tab>s as
 much as possible to make the indent.  You can use ">><<" to replace an indent
@@ -824,7 +864,7 @@ either the first or second pattern in parentheses did not match, so either
 <
 
 Substitute with an expression			*sub-replace-expression*
-						*sub-replace-\=*
+						*sub-replace-\=* *s/\=*
 When the substitute string starts with "\=" the remainder is interpreted as an
 expression.  This does not work recursively: a |substitute()| function inside
 the expression cannot use "\=" for the substitute string.
@@ -1100,11 +1140,12 @@ There are nine types of registers:			*registers* *E354*
 2. 10 numbered registers "0 to "9
 3. The small delete register "-
 4. 26 named registers "a to "z or "A to "Z
-5. four read-only registers ":, "., "% and "#
-6. the expression register "=
-7. The selection and drop registers "*, "+ and "~ 
-8. The black hole register "_
-9. Last search pattern register "/
+5. three read-only registers ":, "., "%
+6. alternate buffer register "#
+7. the expression register "=
+8. The selection and drop registers "*, "+ and "~ 
+9. The black hole register "_
+10. Last search pattern register "/
 
 1. Unnamed register ""				*quote_quote* *quotequote*
 Vim fills this register with text deleted with the "d", "c", "s", "x" commands
@@ -1150,7 +1191,7 @@ letters to replace their previous contents or as uppercase letters to append
 to their previous contents.  When the '>' flag is present in 'cpoptions' then
 a line break is inserted before the appended text.
 
-5. Read-only registers ":, "., "% and "#
+5. Read-only registers ":, ". and "%
 These are '%', '#', ':' and '.'.  You can use them only with the "p", "P",
 and ":put" commands and with CTRL-R.  {not in Vi}
 						*quote_.* *quote.* *E29*
@@ -1161,8 +1202,6 @@ and ":put" commands and with CTRL-R.  {not in Vi}
 		('textwidth' and other options affect what is inserted).
 							*quote_%* *quote%*
 	"%	Contains the name of the current file.
-							*quote_#* *quote#*
-	"#	Contains the name of the alternate file.
 						*quote_:* *quote:* *E30*
 	":	Contains the most recent executed command-line.  Example: Use
 		"@:" to repeat the previous command-line command.
@@ -1171,16 +1210,33 @@ and ":put" commands and with CTRL-R.  {not in Vi}
 		the command was completely from a mapping.
 		{not available when compiled without the |+cmdline_hist|
 		feature}
+							*quote_#* *quote#*
+6. Alternate file register "#
+Contains the name of the alternate file for the current window.  It will
+change how the |CTRL-^| command works.
+This register is writable, mainly to allow for restoring it after a plugin has
+changed it.  It accepts buffer number: >
+    let altbuf = bufnr(@#)
+    ...
+    let @# = altbuf
+It will give error |E86| if you pass buffer number and this buffer does not
+exist.
+It can also accept a match with an existing buffer name: >
+    let @# = 'buffer_name'
+Error |E93| if there is more than one buffer matching the given name or |E94|
+if none of buffers matches the given name.
 
-6. Expression register "=			*quote_=* *quote=* *@=*
+7. Expression register "=			*quote_=* *quote=* *@=*
 This is not really a register that stores text, but is a way to use an
 expression in commands which use a register.  The expression register is
-read-only; you cannot put text into it.  After the '=', the cursor moves to
-the command-line, where you can enter any expression (see |expression|).  All
-normal command-line editing commands are available, including a special
-history for expressions.  When you end the command-line by typing <CR>, Vim
-computes the result of the expression.  If you end it with <Esc>, Vim abandons
-the expression.  If you do not enter an expression, Vim uses the previous
+read-write.
+
+When typing the '=' after " or CTRL-R the cursor moves to the command-line,
+where you can enter any expression (see |expression|).  All normal
+command-line editing commands are available, including a special history for
+expressions.  When you end the command-line by typing <CR>, Vim computes the
+result of the expression.  If you end it with <Esc>, Vim abandons the
+expression.  If you do not enter an expression, Vim uses the previous
 expression (like with the "/" command).
 
 The expression must evaluate to a String.  A Number is always automatically
@@ -1193,7 +1249,7 @@ If the "= register is used for the "p" command, the String is split up at <NL>
 characters.  If the String ends in a <NL>, it is regarded as a linewise
 register.  {not in Vi}
 
-7. Selection and drop registers "*, "+ and "~ 
+8. Selection and drop registers "*, "+ and "~ 
 Use these registers for storing and retrieving the selected text for the GUI.
 See |quotestar| and |quoteplus|.  When the clipboard is not available or not
 working, the unnamed register is used instead.  For Unix systems the clipboard
@@ -1215,17 +1271,17 @@ GTK GUI}
 Note: The "~ register is only used when dropping plain text onto Vim.
 Drag'n'drop of URI lists is handled internally.
 
-8. Black hole register "_				*quote_*
+9. Black hole register "_				*quote_*
 When writing to this register, nothing happens.  This can be used to delete
 text without affecting the normal registers.  When reading from this register,
 nothing is returned.  {not in Vi}
 
-9. Last search pattern register	"/			*quote_/* *quote/*
+10. Last search pattern register	"/			*quote_/* *quote/*
 Contains the most recent search-pattern.  This is used for "n" and 'hlsearch'.
 It is writable with `:let`, you can change it to have 'hlsearch' highlight
 other matches without actually searching.  You can't yank or delete into this
 register.  The search direction is available in |v:searchforward|.
-Note that the valued is restored when returning from a function
+Note that the value is restored when returning from a function
 |function-search-undo|.
 {not in Vi}
 
@@ -1440,10 +1496,10 @@ When you hit Return in a C-comment, Vim will insert the middle comment leader
 for the new line: " * ".  To close this comment you just have to type "/"
 before typing anything else on the new line.  This will replace the
 middle-comment leader with the end-comment leader and apply any specified
-alignment, leaving just " */".  There is no need to hit BackSpace first.
+alignment, leaving just " */".  There is no need to hit Backspace first.
 
-When there is a match with a middle part, but there also is a maching end part
-which is longer, the end part is used.  This makes a C style comment work
+When there is a match with a middle part, but there also is a matching end
+part which is longer, the end part is used.  This makes a C style comment work
 without requiring the middle part to end with a space.
 
 Here is an example of alignment flags at work to make a comment stand out
@@ -1647,7 +1703,7 @@ And a few warnings:
 7. Sorting text						*sorting*
 
 Vim has a sorting function and a sorting command.  The sorting function can be
-found here: |sort()|.
+found here: |sort()|, |uniq()|.
 
 							*:sor* *:sort*
 :[range]sor[t][!] [i][u][r][n][x][o] [/{pattern}/]
@@ -1714,8 +1770,8 @@ Note that using `:sort` with `:global` doesn't sort the matching lines, it's
 quite useless.
 
 The details about sorting depend on the library function used.  There is no
-guarantee that sorting is "stable" or obeys the current locale.  You will have
-to try it out.
+guarantee that sorting obeys the current locale.  You will have to try it out.
+Vim does do a "stable" sort.
 
 The sorting can be interrupted, but if you interrupt it too late in the
 process you may end up with duplicated lines.  This also depends on the system

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 7.4.  Last change: 2013 Mar 16
+*cmdline.txt*   For Vim version 7.4.  Last change: 2014 Sep 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -56,7 +56,7 @@ history tables:
 These are completely separate.  Each history can only be accessed when
 entering the same type of line.
 Use the 'history' option to set the number of lines that are remembered
-(default: 20).
+(default: 50).
 Notes:
 - When you enter a command-line that is exactly the same as an older one, the
   old one is removed (to avoid repeated commands moving older commands out of
@@ -356,6 +356,10 @@ terminals)
 		List the recent five entries from all histories: >
 			:history all -5,
 
+:keepp[atterns] {command}			*:keepp* *:keeppatterns*
+		Execute {command}, without adding anything to the search
+		history
+
 ==============================================================================
 2. Command-line completion				*cmdline-completion*
 
@@ -754,6 +758,7 @@ characters have a special meaning.  These can also be used in the expression
 function expand() |expand()|.
 	%	Is replaced with the current file name.		  *:_%* *c_%*
 	#	Is replaced with the alternate file name.	  *:_#* *c_#*
+		This is remembered for every window.
 	#n	(where n is a number) is replaced with		  *:_#0* *:_#n*
 		the file name of buffer n.  "#0" is the same as "#".     *c_#n*
 	##	Is replaced with all names in the argument list	  *:_##* *c_##*
@@ -819,8 +824,8 @@ Note: these are typed literally, they are not special keys!
 		   the start of the function.
 
 							 *filename-modifiers*
-	 *:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs*
-	        *%:8* *%:p* *%:.* *%:~* *%:h* *%:t* *%:r* *%:e* *%:s* *%:gs*
+*:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs* *::S*
+     *%:8* *%:p* *%:.* *%:~* *%:h* *%:t* *%:r* *%:e* *%:s* *%:gs* *%:S*
 The file name modifiers can be used after "%", "#", "#n", "<cfile>", "<sfile>",
 "<afile>" or "<abuf>".  They are also used with the |fnamemodify()| function.
 These are not available when Vim has been compiled without the |+modify_fname|
@@ -875,6 +880,10 @@ These modifiers can be given, in this order:
 	:gs?pat?sub?
 		Substitute all occurrences of "pat" with "sub".  Otherwise
 		this works like ":s".
+	:S	Escape special characters for use with a shell command (see 
+		|shellescape()|). Must be the last one. Examples: >
+		    :!dir <cfile>:S
+		    :call system('chmod +w -- ' . expand('%:S'))
 
 Examples, when the file name is "src/version.c", current dir
 "/home/mool/vim": >
@@ -1075,6 +1084,9 @@ another window, or drag statuslines of other windows.  You can drag the
 statusline of the command-line window itself and the statusline above it.
 Thus you can resize the command-line window, but not others.
 
+The |getcmdwintype()| function returns the type of the command-line being
+edited as described in |cmdwin-char|.
+
 
 AUTOCOMMANDS
 

runtime/doc/develop.txt

@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 7.4.  Last change: 2013 Apr 27
+*develop.txt*   For Vim version 7.4.  Last change: 2014 Mar 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -19,7 +19,6 @@ code.
 
 Vim is open source software.  Everybody is encouraged to contribute to help
 improving Vim.  For sending patches a context diff "diff -c" is preferred.
-Also see http://www.vim.org/tips/tip.php?tip_id=618.
 Also see http://vim.wikia.com/wiki/How_to_make_and_submit_a_patch.
 
 ==============================================================================

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 7.4.  Last change: 2013 Sep 20
+*diff.txt*      For Vim version 7.4.  Last change: 2015 Feb 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -95,7 +95,7 @@ While already in Vim you can start diff mode in three ways.
 :difft[his]	Make the current window part of the diff windows.  This sets
 		the options like for "vimdiff".
 
-:diffp[atch] {patchfile}				 *E816* *:diffp* *:diffpatch*
+:diffp[atch] {patchfile}			 *E816* *:diffp* *:diffpatch*
 		Use the current buffer, patch it with the diff found in
 		{patchfile} and open a buffer on the result.  The options are
 		set as for "vimdiff".
@@ -266,13 +266,17 @@ that the buffers will be equal within the specified range.
 		See below for [range].
 
 							*do*
-do		Same as ":diffget" without argument or range.  The "o" stands
-		for "obtain" ("dg" can't be used, it could be the start of
-		"dgg"!). Note: this doesn't work in Visual mode.
+[count]do	Same as ":diffget" without range.  The "o" stands for "obtain"
+		("dg" can't be used, it could be the start of "dgg"!). Note:
+		this doesn't work in Visual mode.
+		If you give a [count], it is used as the [bufspec] argument
+		for ":diffget".
 
 							*dp*
-dp		Same as ":diffput" without argument or range.
-		Note: this doesn't work in Visual mode.
+[count]dp	Same as ":diffput" without range.  Note: this doesn't work in
+		Visual mode.
+		If you give a [count], it is used as the [bufspec] argument
+		for ":diffput".
 
 
 When no [range] is given, the diff at the cursor position or just above it is
@@ -310,6 +314,19 @@ name or a part of a buffer name.  Examples:
 
 Also see |'diffopt'| and the "diff" item of |'fillchars'|.
 
+					    *diff-slow* *diff_translations*
+For very long lines, the diff syntax highlighting might be slow, especially
+since it tries to match all different kind of localisations. To disable
+localisations and speed up the syntax highlighting, set the global variable
+g:diff_translations to zero: >
+
+    let g:diff_translations = 0
+<
+After setting this variable, Reload the syntax script: >
+
+    set syntax=diff
+<
+
 
 FINDING THE DIFFERENCES					*diff-diffexpr*
 

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 7.4.  Last change: 2011 Jan 15
+*digraph.txt*   For Vim version 7.4.  Last change: 2014 Jun 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -147,7 +147,7 @@ a standard meaning:
 	Two			2	Hook
 	Nine			9	Horn
 
-	Equals			=	Cyrillic
+	Equals			=	Cyrillic (= used as second char) 
 	Asterisk		*	Greek
 	Percent sign		%	Greek/Cyrillic special
 	Plus			+	smalls: Arabic, capitals: Hebrew
@@ -170,6 +170,11 @@ used for the currency sign, and latin9 (iso-8859-15), where the digraph =e is
 used for the euro sign, while both of them are the character 164, 0xa4.  For
 compatibility with zsh Eu can also be used for the euro sign.
 
+ROUBLE
+
+The rouble sign was added in 2014 as 0x20bd.  Vim supports the digraphs =R and
+=P for this.  Note that R= and P= are other characters.
+
 							*digraph-table*
 char  digraph	hex	dec	official name ~
 ^@	NU	0x00	  0	NULL (NUL)
@@ -966,6 +971,8 @@ char  digraph	hex	dec	official name ~
 ₧	Pt	20A7	8359	PESETA SIGN
 ₩	W=	20A9	8361	WON SIGN
 €	Eu	20AC	8364	EURO SIGN
+₽	=R	20BD	8381	ROUBLE SIGN
+₽	=P	20BD	8381	ROUBLE SIGN
 ℃	oC	2103	8451	DEGREE CELSIUS
 ℅	co	2105	8453	CARE OF
 ℉	oF	2109	8457	DEGREE FAHRENHEIT
@@ -1077,7 +1084,7 @@ char  digraph	hex	dec	official name ~
 ⊥	-T	22A5	8869	UP TACK
 ⋅	.P	22C5	8901	DOT OPERATOR
 ⋮	:3	22EE	8942	VERTICAL ELLIPSIS
-⋯       .3      22EF    8943    MIDLINE HORIZONTAL ELLIPSIS
+⋯	.3	22EF	8943	MIDLINE HORIZONTAL ELLIPSIS
 ⌂	Eh	2302	8962	HOUSE
 ⌈	<7	2308	8968	LEFT CEILING
 ⌉	>7	2309	8969	RIGHT CEILING

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 7.4.  Last change: 2013 Aug 03
+*editing.txt*   For Vim version 7.4.  Last change: 2015 Feb 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -38,6 +38,7 @@ If there already was a current file name, then that one becomes the alternate
 file name.  It can be used with "#" on the command line |:_#| and you can use
 the |CTRL-^| command to toggle between the current and the alternate file.
 However, the alternate file name is not changed when |:keepalt| is used.
+An alternate file name is remembered for each window.
 
 							*:keepalt* *:keepa*
 :keepalt {cmd}		Execute {cmd} while keeping the current alternate file
@@ -303,7 +304,8 @@ CTRL-^			Edit the alternate file.  Mostly the alternate file is
 			Mnemonic: "goto file".
 			Uses the 'isfname' option to find out which characters
 			are supposed to be in a file name.  Trailing
-			punctuation characters ".,:;!" are ignored.
+			punctuation characters ".,:;!" are ignored. Escaped
+			spaces "\ " are reduced to a single space.
 			Uses the 'path' option as a list of directory names to
 			look for the file.  See the 'path' option for details
 			about relative directories and wildcards.
@@ -608,7 +610,10 @@ list of the current window.
 			{not in Vi}
 
 :[count]arga[dd] {name} ..			*:arga* *:argadd* *E479*
-			Add the {name}s to the argument list.
+:[count]arga[dd]
+			Add the {name}s to the argument list.  When {name} is
+			omitted add the current buffer name to the argument
+			list.
 			If [count] is omitted, the {name}s are added just
 			after the current entry in the argument list.
 			Otherwise they are added after the [count]'th file.
@@ -618,7 +623,8 @@ list of the current window.
 				:argadd x	a b x c
 				:0argadd x	x a b c
 				:1argadd x	a x b c
-				:99argadd x	a b c x
+				:$argadd x	a b c x
+				:+2argadd y	a b c x y
 			There is no check for duplicates, it is possible to
 			add a file to the argument list twice.
 			The currently edited file is not changed.
@@ -640,11 +646,19 @@ list of the current window.
 <			{not in Vi} {not available when compiled without the
 			|+listcmds| feature}
 
-:{range}argd[elete]	Delete the {range} files from the argument list.
+:[range]argd[elete]	Delete the {range} files from the argument list.
+			Example: >
+				:10,$argdel
+<			Deletes arguments 10 and further, keeping 1-9. >
+				:$argd
+<			Deletes just the last one. >
+				:argd
+				:.argd
+<			Deletes the current argument. >
+				:%argd
+<			Removes all the files from the arglist.
 			When the last number in the range is too high, up to
-			the last argument is deleted.  Example: >
-				:10,1000argdel
-<			Deletes arguments 10 and further, keeping 1-9.
+			the last argument is deleted.
 			{not in Vi} {not available when compiled without the
 			|+listcmds| feature}
 
@@ -819,8 +833,9 @@ current window.  The two windows then share this list, until one of them uses
 USING THE ARGUMENT LIST
 
 						*:argdo*
-:argdo[!] {cmd}		Execute {cmd} for each file in the argument list.
-			It works like doing this: >
+:[range]argdo[!] {cmd}	Execute {cmd} for each file in the argument list or
+			if [range] is specified only for arguments in that
+			range.  It works like doing this: >
 				:rewind
 				:{cmd}
 				:next
@@ -1076,9 +1091,12 @@ The names can be in upper- or lowercase.
 			the last file in the argument list has not been
 			edited.  See |:confirm| and 'confirm'.  {not in Vi}
 
-:q[uit]!		Quit without writing, also when visible buffers have
-			changes.  Does not exit when there are changed hidden
-			buffers.  Use ":qall!" to exit always.
+:q[uit]!		Quit without writing, also when currently visible
+			buffers have changes.  Does not exit when this is the
+			last window and there is a changed hidden buffer.
+			In this case, the first changed hidden buffer becomes
+			the current buffer.
+			Use ":qall!" to exit always.
 
 :cq[uit]		Quit always, without writing, and return an error
 			code.  See |:cq|.  Used for Manx's QuickFix mode (see
@@ -1361,11 +1379,21 @@ cannot be read without the right key.
 {only available when compiled with the |+cryptv| feature}  *E833*
 
 The text in the swap file and the undo file is also encrypted.  *E843*
+However, this is done block-by-block and may reduce the time needed to crack a
+password.  You can disable the swap file, but then a crash will cause you to
+lose your work.  The undo file can be disabled without much disadvantage. >
+	:set noundofile
+	:noswapfile edit secrets
 
 Note: The text in memory is not encrypted.  A system administrator may be able
 to see your text while you are editing it.  When filtering text with
-":!filter" or using ":w !command" the text is not encrypted, this may reveal
-it to others.  The 'viminfo' file is not encrypted.
+":!filter" or using ":w !command" the text is also not encrypted, this may
+reveal it to others.  The 'viminfo' file is not encrypted.
+
+You could do this to edit very secret text: >
+	:set noundofile viminfo=
+	:noswapfile edit secrets.txt
+Keep in mind that without a swap file you risk losing your work in a crash.
 
 WARNING: If you make a typo when entering the key and then write the file and
 exit, the text will be lost!
@@ -1392,18 +1420,23 @@ To disable the encryption, reset the 'key' option to an empty value: >
 	:set key=
 
 You can use the 'cryptmethod' option to select the type of encryption, use one
-of these two: >
-	:setlocal cm=zip       " weak method, backwards compatible
-	:setlocal cm=blowfish  " strong method
+of these: >
+	:setlocal cm=zip        " weak method, backwards compatible
+	:setlocal cm=blowfish   " method with flaws
+	:setlocal cm=blowfish2  " medium strong method
+
 Do this before writing the file.  When reading an encrypted file it will be
 set automatically to the method used when that file was written.  You can
 change 'cryptmethod' before writing that file to change the method.
-To set the default method, used for new files, use one of these in your
-|vimrc| file: >
-	set cm=zip
-	set cm=blowfish
+
+To set the default method, used for new files, use this in your |vimrc| 
+file: >
+	set cm=blowfish2
+Using "blowfish2" is highly recommended.  Only use another method if you
+must use an older Vim version that does not support it.
+
 The message given for reading and writing a file will show "[crypted]" when
-using zip, "[blowfish]" when using blowfish.
+using zip, "[blowfish]" when using blowfish, etc.
 
 When writing an undo file, the same key and method will be used for the text
 in the undo file. |persistent-undo|.
@@ -1438,7 +1471,7 @@ lines to "/etc/magic", "/usr/share/misc/magic" or wherever your system has the
      0	string	VimCrypt~	Vim encrypted file
      >9	string	01	- "zip" cryptmethod
      >9	string	02	- "blowfish" cryptmethod
-
+     >9	string	03	- "blowfish2" cryptmethod
 
 Notes:
 - Encryption is not possible when doing conversion with 'charconvert'.
@@ -1462,20 +1495,25 @@ Notes:
 - Pkzip uses the same encryption as 'cryptmethod' "zip", and US Govt has no
   objection to its export.  Pkzip's public file APPNOTE.TXT describes this
   algorithm in detail.
+- The implementation of 'cryptmethod' "blowfish" has a flaw.  It is possible
+  to crack the first 64 bytes of a file and in some circumstances more of the
+  file. Use of it is not recommended, but it's still the strongest method
+  supported by Vim 7.3 and 7.4.  The "zip" method is even weaker.
 - Vim originates from the Netherlands.  That is where the sources come from.
   Thus the encryption code is not exported from the USA.
 
 ==============================================================================
 10. Timestamps					*timestamp* *timestamps*
 
-Vim remembers the modification timestamp of a file when you begin editing it.
-This is used to avoid that you have two different versions of the same file
-(without you knowing this).
+Vim remembers the modification timestamp, mode and size of a file when you
+begin editing it.  This is used to avoid that you have two different versions
+of the same file (without you knowing this).
 
-After a shell command is run (|:!cmd| |suspend| |:read!| |K|) timestamps are
-compared for all buffers in a window.   Vim will run any associated
-|FileChangedShell| autocommands or display a warning for any files that have
-changed.  In the GUI this happens when Vim regains input focus.
+After a shell command is run (|:!cmd| |suspend| |:read!| |K|) timestamps,
+file modes and file sizes are compared for all buffers in a window.   Vim will
+run any associated |FileChangedShell| autocommands or display a warning for
+any files that have changed.  In the GUI this happens when Vim regains input
+focus.
 
 							*E321* *E462*
 If you want to automatically reload a file when it has been changed outside of

runtime/doc/farsi.txt

@@ -222,7 +222,7 @@ o  Keyboard
 Note:
 	<09>  stands for Farsi PSP (break without space)
 
-	<09>  stands for Farsi PCN (for HAMZE attribute )
+	<09>  stands for Farsi PCN (for HAMZE attribute)
 
 Restrictions
 ------------

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 7.4.  Last change: 2013 May 25
+*filetype.txt*  For Vim version 7.4.  Last change: 2013 Dec 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -447,23 +447,25 @@ g:changelog_new_date_format
 				%%	insert a single '%' character
 				%d	insert the date from above
 				%u	insert the user from above
+                                %p	insert result of b:changelog_entry_prefix
 				%c	where to position cursor when done
-			The default is "%d  %u\n\n\t* %c\n\n", which produces
+			The default is "%d  %u\n\n\t* %p%c\n\n", which produces
 			something like (| is where cursor will be, unless at
 			the start of the line where it denotes the beginning
 			of the line) >
 				|2003-01-14  Full Name  <user@host>
 				|
-				|        * |
+				|        * prefix|
 <
 g:changelog_new_entry_format
 			The format used when creating a new entry.
 			The following table describes special tokens in the
 			string:
+                                %p	insert result of b:changelog_entry_prefix
 				%c	where to position cursor when done
 			The default is "\t*%c", which produces something
 			similar to >
-				|        * |
+				|        * prefix|
 <
 g:changelog_date_entry_search
 			The search pattern to use when searching for a

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 7.4.  Last change: 2010 May 13
+*fold.txt*      For Vim version 7.4.  Last change: 2013 Dec 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -285,9 +285,10 @@ zF		Create a fold for [count] lines.  Works like "zf".
 							*zd* *E351*
 zd		Delete one fold at the cursor.  When the cursor is on a folded
 		line, that fold is deleted.  Nested folds are moved one level
-		up.  In Visual mode all folds (partially) in the selected area
-		are deleted.  Careful: This easily deletes more folds than you
-		expect and there is no undo.
+		up.  In Visual mode one level of all folds (partially) in the
+		selected area are deleted.
+		Careful: This easily deletes more folds than you expect and
+		there is no undo for manual folding.
 		This only works when 'foldmethod' is "manual" or "marker".
 		Also see |fold-delete-marker|.
 
@@ -364,7 +365,7 @@ zX		Undo manually opened and closed folds: re-apply 'foldlevel'.
 		Also forces recomputing folds, like |zx|.
 
 							*zm*
-zm		Fold more: Subtract one from 'foldlevel'.  If 'foldlevel' was
+zm		Fold more: Subtract |v:count1| from 'foldlevel'.  If 'foldlevel' was
 		already zero nothing happens.
 		'foldenable' will be set.
 
@@ -373,7 +374,7 @@ zM		Close all folds: set 'foldlevel' to 0.
 		'foldenable' will be set.
 
 							*zr*
-zr		Reduce folding: Add one to 'foldlevel'.
+zr		Reduce folding: Add |v:count1| to 'foldlevel'.
 
 							*zR*
 zR		Open all folds.  This sets 'foldlevel' to highest fold level.

runtime/doc/gui.txt

@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 7.4.  Last change: 2013 Jun 12
+*gui.txt*       For Vim version 7.4.  Last change: 2014 Mar 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -133,6 +133,7 @@ task bar with the 'guiheadroom' option.
 :winp[os]
 		Display current position of the top left corner of the GUI vim
 		window in pixels.  Does not work in all versions.
+		Also see |getwinposx()| and |getwinposy()|.
 
 :winp[os] {X} {Y}							*E466*
 		Put the GUI vim window at the given {X} and {Y} coordinates.
@@ -151,8 +152,11 @@ task bar with the 'guiheadroom' option.
 		option.
 
 If you are running the X Window System, you can get information about the
-window Vim is running in with this command: >
+window Vim is running in with these commands: >
 	:!xwininfo -id $WINDOWID
+	:!xprop -id $WINDOWID
+	:execute '!xwininfo -id ' . v:windowid
+	:execute '!xprop -id ' . v:windowid
 <
 							*gui-IME* *iBus*
 Input methods for international characters in X that rely on the XIM

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 7.4.  Last change: 2012 Aug 04
+*gui_w32.txt*   For Vim version 7.4.  Last change: 2014 Dec 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -452,9 +452,10 @@ detailed elsewhere: see |'mouse'|, |win32-hidden-menus|.
 You can drag and drop one or more files into the Vim window, where they will
 be opened as normal.  See |drag-n-drop|.
 
-							*:simalt* *:si*
+							*:simalt* *:sim*
 :sim[alt] {key}		simulate pressing {key} while holding Alt pressed.
 			{not in Vi} {only for Win32 versions}
+			Note: ":si" means ":s" with the "i" flag.
 
 Normally, Vim takes control of all Alt-<Key> combinations, to increase the
 number of possible mappings.  This clashes with the standard use of Alt as the

runtime/doc/gui_x11.txt

@@ -1,4 +1,4 @@
-*gui_x11.txt*   For Vim version 7.4.  Last change: 2011 Sep 14
+*gui_x11.txt*   For Vim version 7.4.  Last change: 2014 Mar 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -442,7 +442,7 @@ command line argument).
 							*gui-x11-kde*
 There is no KDE version of Vim.  There has been some work on a port using the
 Qt toolkit, but it never worked properly and it has been abandoned.  Work
-continues on Yzis: www.yzis.org.
+continues on Yzis: https://github.com/chrizel/Yzis.
 
 ==============================================================================
 8. Compiling						*gui-x11-compiling*

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 7.4.  Last change: 2012 Dec 06
+*help.txt*	For Vim version 7.4.  Last change: 2015 Jun 21
 
 			VIM - main help file
 									 k
@@ -24,6 +24,7 @@ Get specific help:  It is possible to go directly to whatever you want help
 		      Command-line editing	  c_	   :help c_<Del>
 		      Vim command argument	  -	   :help -r
 		      Option			  '	   :help 'textwidth'
+		      Regular expression	  /	   :help /[
   Search for help:  Type ":help word", then hit CTRL-D to see matching
 		    help entries for "word".
 		    Or use ":helpgrep word". |:helpgrep|
@@ -196,6 +197,7 @@ Remarks about specific systems ~
 Standard plugins ~
 |pi_getscript.txt| Downloading latest version of Vim scripts
 |pi_gzip.txt|      Reading and writing compressed files
+|pi_logipat.txt|   Logical operators on patterns
 |pi_netrw.txt|     Reading and writing files over a network
 |pi_paren.txt|     Highlight matching parens
 |pi_tar.txt|       Tar file explorer

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 7.4.  Last change: 2012 Nov 28
+*helphelp.txt*	For Vim version 7.4.  Last change: 2014 Sep 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -96,6 +96,9 @@ Help on help files					*helphelp*
 			find a tag in a file with the same language as the
 			current file.  See |help-translated|.
 
+						 	*:helpc* *:helpclose*
+:helpc[lose]            Close one help window, if there is one.
+
 							*:helpg* *:helpgrep*
 :helpg[rep] {pattern}[@xx]
 			Search all help text files and make a list of lines

runtime/doc/if_ole.txt

@@ -197,7 +197,7 @@ files in it.
 --remote-silent "+call cursor(10, 27)"
 	      - Places the cursor on line 10 column 27
 In Vim >
-   :h --remote-silent for mor details
+   :h --remote-silent for more details
 
 [.Net remarks provided by Dave Fishburn and Brian Sturk]
 

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 7.4.  Last change: 2013 Jul 10
+*if_pyth.txt*   For Vim version 7.4.  Last change: 2014 Jul 23
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -28,7 +28,7 @@ Both can be available at the same time, but read |python-2-and-3|.
 ==============================================================================
 1. Commands						*python-commands*
 
-					*:python* *:py* *E205* *E263* *E264*
+					*:python* *:py* *E263* *E264* *E887*
 :[range]py[thon] {stmt}
 			Execute Python statement {stmt}.  A simple check if
 			the `:python` command is working: >

runtime/doc/if_ruby.txt

@@ -1,4 +1,4 @@
-*if_ruby.txt*   For Vim version 7.4.  Last change: 2012 Aug 02
+*if_ruby.txt*   For Vim version 7.4.  Last change: 2015 Feb 22
 
 
 		  VIM REFERENCE MANUAL    by Shugo Maeda
@@ -120,9 +120,13 @@ VIM::command({cmd})
 							*ruby-evaluate*
 VIM::evaluate({expr})
 	Evaluates {expr} using the vim internal expression evaluator (see
-	|expression|).  Returns the expression result as a string.
-	A |List| is turned into a string by joining the items and inserting
-	line breaks.
+	|expression|).  Returns the expression result as:
+	- a Integer if the Vim expression evaluates to a number
+	- a Float if the Vim expression evaluates to a float
+	- a String if the Vim expression evaluates to a string
+	- a Array if the Vim expression evaluates to a Vim list
+	- a Hash if the Vim expression evaluates to a Vim dictionary
+	Dictionaries and lists are recursively expanded.
 
 ==============================================================================
 3. VIM::Buffer objects					*ruby-buffer*

runtime/doc/indent.txt

@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 7.4.  Last change: 2013 Aug 03
+*indent.txt*    For Vim version 7.4.  Last change: 2014 Dec 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -598,7 +598,6 @@ without limits.
 	" Default
 	let g:clojure_maxlines = 100
 <
-
 						*g:clojure_fuzzy_indent*
 					*g:clojure_fuzzy_indent_patterns*
 					*g:clojure_fuzzy_indent_blacklist*
@@ -652,7 +651,6 @@ default list below.
 	let g:clojure_special_indent_words =
 	   \ 'deftype,defrecord,reify,proxy,extend-type,extend-protocol,letfn'
 <
-
 					*g:clojure_align_multiline_strings*
 
 Align subsequent lines in multiline strings to the column after the opening
@@ -677,7 +675,28 @@ This option is off by default.
 	" Default
 	let g:clojure_align_multiline_strings = 0
 <
+						*g:clojure_align_subforms*
 
+By default, parenthesized compound forms that look like function calls and
+whose head subform is on its own line have subsequent subforms indented by
+two spaces relative to the opening paren:
+>
+	(foo
+	  bar
+	  baz)
+<
+Setting this option changes this behavior so that all subforms are aligned to
+the same column, emulating the default behavior of clojure-mode.el:
+>
+	(foo
+	 bar
+	 baz)
+<
+This option is off by default.
+>
+	" Default
+	let g:clojure_align_subforms = 0
+<
 
 FORTRAN							*ft-fortran-indent*
 
@@ -793,7 +812,7 @@ OPTIONS: ~
 PHP indenting can be altered in several ways by modifying the values of some
 global variables:
 
-								*php-comment*
+					*php-comment* *PHP_autoformatcomment*
 To not enable auto-formating of comments by default (if you want to use your
 own 'formatoptions'): >
     :let g:PHP_autoformatcomment = 0
@@ -802,6 +821,7 @@ Else, 't' will be removed from the 'formatoptions' string and "qrowcb" will be
 added, see |fo-table| for more information.
 -------------
 
+							*PHP_outdentSLComments*
 To add extra indentation to single-line comments: >
     :let g:PHP_outdentSLComments = N
 
@@ -813,6 +833,7 @@ Only single-line comments will be affected such as: >
     /* Comment */
 -------------
 
+							*PHP_default_indenting*
 To add extra indentation to every PHP lines with N being the number of
 'shiftwidth' to add: >
     :let g:PHP_default_indenting = N
@@ -832,14 +853,18 @@ For example, with N = 1, this will give:
 (Notice the extra indentation between the PHP container markers and the code)
 -------------
 
-To indent PHP tags as the surrounding code: >
-    :let g:PHP_outdentphpescape = 0
+							*PHP_outdentphpescape*
+To indent PHP escape tags as the surrounding non-PHP code (only affects the
+PHP escape tags): >
+:let g:PHP_outdentphpescape = 0
 -------------
 
+							*PHP_removeCRwhenUnix*
 To automatically remove '\r' characters when the 'fileformat' is set to Unix: >
     :let g:PHP_removeCRwhenUnix = 1
 -------------
 
+							*PHP_BracesAtCodeLevel*
 To indent braces at the same level than the code they contain: >
     :let g:PHP_BracesAtCodeLevel = 1
     
@@ -858,6 +883,7 @@ NOTE:	Indenting will be a bit slower if this option is used because some
 	optimizations won't be available.
 -------------
 
+							*PHP_vintage_case_default_indent*
 To indent 'case:' and 'default:' statements in switch() blocks: >
     :let g:PHP_vintage_case_default_indent = 1
 

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.4.  Last change: 2013 Oct 01
+*index.txt*     For Vim version 7.4.  Last change: 2015 Feb 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -702,12 +702,16 @@ tag		char	      note action in Normal mode	~
 |g'|		g'{mark}	1  like |'| but without changing the jumplist
 |g`|		g`{mark}	1  like |`| but without changing the jumplist
 |gstar|		g*		1  like "*", but without using "\<" and "\>"
+|g+|		g+		   go to newer text state N times
+|g,|		g,		1  go to N newer position in change list
+|g-|		g-		   go to older text state N times
 |g0|		g0		1  when 'wrap' off go to leftmost character of
 				   the current line that is on the screen;
 				   when 'wrap' on go to the leftmost character
 				   of the current screen line
 |g8|		g8		   print hex value of bytes used in UTF-8
 				   character under the cursor
+|g;|		g;		1  go to N older position in change list
 |g<|		g<		   display previous command output
 |g?|		g?		2  Rot13 encoding operator
 |g?g?|		g??		2  Rot13 encode current line
@@ -736,6 +740,7 @@ tag		char	      note action in Normal mode	~
 				   the screen; when 'wrap' on go to the
 				   leftmost non-white character of the current
 				   screen line
+|g_|		g_		1  cursor to the last CHAR N - 1 lines lower
 |ga|		ga		   print ascii value of character under the
 				   cursor
 |gd|		gd		1  go to definition of word under the cursor
@@ -1124,8 +1129,8 @@ tag	      command	      action ~
 |:cNfile|	:cNf[ile]	go to last error in previous file
 |:cabbrev|	:ca[bbrev]	like ":abbreviate" but for Command-line mode
 |:cabclear|	:cabc[lear]	clear all abbreviations for Command-line mode
-|:caddbuffer|	:caddb[uffer]	add errors from buffer
-|:caddexpr|	:cad[dexpr]	add errors from expr
+|:caddbuffer|	:cad[dbuffer]	add errors from buffer
+|:caddexpr|	:cadde[xpr]	add errors from expr
 |:caddfile|	:caddf[ile]	add error message to current quickfix list
 |:call|		:cal[l]		call a function
 |:catch|	:cat[ch]	part of a :try command
@@ -1244,6 +1249,7 @@ tag	      command	      action ~
 |:gvim|		:gv[im]		start the GUI
 |:hardcopy|	:ha[rdcopy]	send text to the printer
 |:help|		:h[elp]		open a help window
+|:helpclose|	:helpc[lose]	close one help window
 |:helpfind|	:helpf[ind]	dialog to open a help window
 |:helpgrep|	:helpg[rep]	like ":grep" but searches help files
 |:helptags|	:helpt[ags]	generate help tags for a directory
@@ -1275,6 +1281,7 @@ tag	      command	      action ~
 |:keepalt|	:keepa[lt]	following command keeps the alternate file
 |:keepmarks|	:kee[pmarks]	following command keeps marks where they are
 |:keepjumps|	:keepj[umps]	following command keeps jumplist and marks
+|:keeppatterns|	:keepp[atterns]	following command keeps search pattern history
 |:lNext|	:lN[ext]	go to previous entry in location list
 |:lNfile|	:lNf[ile]	go to last entry in previous file
 |:list|		:l[ist]		print lines
@@ -1360,13 +1367,14 @@ tag	      command	      action ~
 |:nmenu|	:nme[nu]	add menu for Normal mode
 |:nnoremap|	:nn[oremap]	like ":noremap" but for Normal mode
 |:nnoremenu|	:nnoreme[nu]	like ":noremenu" but for Normal mode
-|:noautocmd|	:noa[utocmd]	following command don't trigger autocommands
+|:noautocmd|	:noa[utocmd]	following commands don't trigger autocommands
 |:noremap|	:no[remap]	enter a mapping that will not be remapped
 |:nohlsearch|	:noh[lsearch]	suspend 'hlsearch' highlighting
 |:noreabbrev|	:norea[bbrev]	enter an abbreviation that will not be
 				remapped
 |:noremenu|	:noreme[nu]	enter a menu that will not be remapped
 |:normal|	:norm[al]	execute Normal mode commands
+|:noswapfile|	:nos[wapfile]	following commands don't create a swap file
 |:number|	:nu[mber]	print lines with line number
 |:nunmap|	:nun[map]	like ":unmap" but for Normal mode
 |:nunmenu|	:nunme[nu]	remove menu for Normal mode
@@ -1462,7 +1470,7 @@ tag	      command	      action ~
 				buffer list
 |:sbrewind|	:sbr[ewind]	split window and go to first file in the
 				buffer list
-|:scriptnames|	:scrip[tnames]	list names of all sourced Vim scripts
+|:scriptnames|	:scr[iptnames]	list names of all sourced Vim scripts
 |:scriptencoding| :scripte[ncoding]	encoding used in sourced Vim script
 |:scscope|	:scs[cope]	split window and execute cscope command
 |:set|		:se[t]		show or set options

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.4.  Last change: 2013 Jul 12
+*insert.txt*    For Vim version 7.4.  Last change: 2015 Jun 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -51,6 +51,8 @@ char		action	~
 		abbreviation.
 		Note: If your <Esc> key is hard to hit on your keyboard, train
 		yourself to use CTRL-[.
+		If Esc doesn't work and you are using a Mac, try CTRL-Esc.
+		Or disable Listening under Accessibility preferences.
 						*i_CTRL-C*
 CTRL-C		Quit insert mode, go back to Normal mode.  Do not check for
 		abbreviations.  Does not trigger the |InsertLeave| autocommand
@@ -79,9 +81,11 @@ CTRL-W		Delete the word before the cursor (see |i_backspacing| about
 		joining lines).  See the section "word motions",
 		|word-motions|, for the definition of a word.
 						*i_CTRL-U*
-CTRL-U		Delete all entered characters in the current line (see
-		|i_backspacing| about joining lines).
-
+CTRL-U		Delete all entered characters before the cursor in the current
+		line.  If there are no newly entered characters and
+		'backspace' is not empty, delete all characters before the
+		cursor in the current line.
+		See |i_backspacing| about joining lines.
 						*i_CTRL-I* *i_<Tab>* *i_Tab*
 <Tab> or CTRL-I Insert a tab.  If the 'expandtab' option is on, the
 		equivalent number of spaces is inserted (use CTRL-V <Tab> to
@@ -1302,7 +1306,7 @@ HTML							*ft-html-omni*
 XHTML							*ft-xhtml-omni*
 
 CTRL-X CTRL-O provides completion of various elements of (X)HTML files.  It is
-designed to support writing of XHTML 1.0 Strict files but will also works for
+designed to support writing of XHTML 1.0 Strict files but will also work for
 other versions of HTML. Features:
 
 - after "<" complete tag name depending on context (no div suggestion inside

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 7.4.  Last change: 2013 Jun 17
+*intro.txt*     For Vim version 7.4.  Last change: 2015 Jan 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -135,10 +135,11 @@ http://www.vim.org/maillist.php
 
 Bug reports:				*bugs* *bug-reports* *bugreport.vim*
 
-Send bug reports to: Vim Developers <vim_dev@vim.org>
-This is a maillist, many people will see the message.  If you don't want that,
-e.g. because it is a security issue, send it to <bugs@vim.org>, this only goes
-to the Vim maintainer (that's Bram).
+Send bug reports to: Vim Developers <vim-dev@vim.org>
+This is a maillist, you need to become a member first and many people will see
+the message.  If you don't want that, e.g. because it is a security issue,
+send it to <bugs@vim.org>, this only goes to the Vim maintainer (that's Bram).
+
 Please be brief; all the time that is spent on answering mail is subtracted
 from the time that is spent on improving Vim!  Always give a reproducible
 example and try to find out which settings or other things influence the

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.4.  Last change: 2013 Aug 22
+*map.txt*       For Vim version 7.4.  Last change: 2014 Dec 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -60,17 +60,17 @@ modes.
 			{rhs}, is then further scanned for mappings.  This
 			allows for nested and recursive use of mappings.
 
-
-:no[remap]  {lhs} {rhs}		|mapmode-nvo|		*:no*  *:noremap*
-:nn[oremap] {lhs} {rhs}		|mapmode-n|		*:nn*  *:nnoremap*
-:vn[oremap] {lhs} {rhs}		|mapmode-v|		*:vn*  *:vnoremap*
-:xn[oremap] {lhs} {rhs}		|mapmode-x|		*:xn*  *:xnoremap*
-:snor[emap] {lhs} {rhs}		|mapmode-s|		*:snor* *:snoremap*
-:ono[remap] {lhs} {rhs}		|mapmode-o|		*:ono* *:onoremap*
-:no[remap]! {lhs} {rhs}		|mapmode-ic|		*:no!* *:noremap!*
-:ino[remap] {lhs} {rhs}		|mapmode-i|		*:ino* *:inoremap*
-:ln[oremap] {lhs} {rhs}		|mapmode-l|		*:ln*  *:lnoremap*
-:cno[remap] {lhs} {rhs}		|mapmode-c|		*:cno* *:cnoremap*
+						*:nore* *:norem*
+:no[remap]  {lhs} {rhs}		|mapmode-nvo|	*:no*  *:noremap* *:nor*
+:nn[oremap] {lhs} {rhs}		|mapmode-n|	*:nn*  *:nnoremap*
+:vn[oremap] {lhs} {rhs}		|mapmode-v|	*:vn*  *:vnoremap*
+:xn[oremap] {lhs} {rhs}		|mapmode-x|	*:xn*  *:xnoremap*
+:snor[emap] {lhs} {rhs}		|mapmode-s|	*:snor* *:snoremap*
+:ono[remap] {lhs} {rhs}		|mapmode-o|	*:ono* *:onoremap*
+:no[remap]! {lhs} {rhs}		|mapmode-ic|	*:no!* *:noremap!*
+:ino[remap] {lhs} {rhs}		|mapmode-i|	*:ino* *:inoremap*
+:ln[oremap] {lhs} {rhs}		|mapmode-l|	*:ln*  *:lnoremap*
+:cno[remap] {lhs} {rhs}		|mapmode-c|	*:cno* *:cnoremap*
 			Map the key sequence {lhs} to {rhs} for the modes
 			where the map command applies.  Disallow mapping of
 			{rhs}, to avoid nested and recursive mappings.  Often
@@ -306,9 +306,21 @@ is disabled.  This makes it possible to map zero without making it impossible
 to type a count with a zero.
 
 						*map-overview* *map-modes*
-Overview of which map command works in which mode:
+Overview of which map command works in which mode.  More details below.
+     COMMANDS                    MODES ~
+:map   :noremap  :unmap     Normal, Visual, Select, Operator-pending
+:nmap  :nnoremap :nunmap    Normal
+:vmap  :vnoremap :vunmap    Visual and Select
+:smap  :snoremap :sunmap    Select
+:xmap  :xnoremap :xunmap    Visual
+:omap  :onoremap :ounmap    Operator-pending
+:map!  :noremap! :unmap!    Insert and Command-line
+:imap  :inoremap :iunmap    Insert
+:lmap  :lnoremap :lunmap    Insert, Command-line, Lang-Arg
+:cmap  :cnoremap :cunmap    Command-line
 
-    commands:				      modes: ~
+
+    COMMANDS				      MODES ~
 				       Normal  Visual+Select  Operator-pending ~
 :map   :noremap   :unmap   :mapclear	 yes	    yes		   yes
 :nmap  :nnoremap  :nunmap  :nmapclear	 yes	     -		    -
@@ -324,7 +336,7 @@ NOTE: Mapping a printable character in Select mode may confuse the user.  It's
 better to explicitly use :xmap and :smap for printable characters.  Or use
 :sunmap after defining the mapping.
 
-    commands:				      modes: ~
+    COMMANDS				      MODES ~
 					  Visual    Select ~
 :vmap  :vnoremap  :vunmap  :vmapclear	    yes      yes
 :xmap  :xnoremap  :xunmap  :xmapclear	    yes       -
@@ -333,7 +345,7 @@ better to explicitly use :xmap and :smap for printable characters.  Or use
 			*mapmode-ic* *mapmode-i* *mapmode-c* *mapmode-l*
 Some commands work both in Insert mode and Command-line mode, some not:
 
-    commands:				      modes: ~
+    COMMANDS				      MODES ~
 					  Insert  Command-line	Lang-Arg ~
 :map!  :noremap!  :unmap!  :mapclear!	    yes	       yes	   -
 :imap  :inoremap  :iunmap  :imapclear	    yes		-	   -
@@ -593,7 +605,7 @@ illogical when compared to other commands.
 When you have a mapping that contains an Ex command, you need to put a line
 terminator after it to have it executed.  The use of <CR> is recommended for
 this (see |<>|).  Example: >
-   :map  _ls  :!ls -l %<CR>:echo "the end"<CR>
+   :map  _ls  :!ls -l %:S<CR>:echo "the end"<CR>
 
 To avoid mapping of the characters you type in insert or Command-line mode,
 type a CTRL-V first.  The mapping in Insert mode is disabled if the 'paste'
@@ -816,12 +828,10 @@ Here is an example that counts the number of spaces with <F4>: >
 	  let &selection = "inclusive"
 	  let reg_save = @@
 
-	  if a:0  " Invoked from Visual mode, use '< and '> marks.
-	    silent exe "normal! `<" . a:type . "`>y"
+	  if a:0  " Invoked from Visual mode, use gv command.
+	    silent exe "normal! gvy"
 	  elseif a:type == 'line'
 	    silent exe "normal! '[V']y"
-	  elseif a:type == 'block'
-	    silent exe "normal! `[\<C-V>`]y"
 	  else
 	    silent exe "normal! `[v`]y"
 	  endif
@@ -913,9 +923,11 @@ Examples: ({CURSOR} is where you type a non-keyword character) >
 <		"test;;"	  is not expanded
 		"test ;;"	  is expanded to "test <endofline>"
 
-To avoid the abbreviation in insert mode: Type part of the abbreviation, exit
-insert mode with <Esc>, re-enter insert mode with "a" and type the rest.  Or
-type CTRL-V before the character after the abbreviation.
+To avoid the abbreviation in Insert mode: Type CTRL-V before the character
+that would trigger the abbreviation.  E.g. CTRL-V <Space>.  Or type part of
+the abbreviation, exit insert mode with <Esc>, re-enter insert mode with "a"
+and type the rest.
+
 To avoid the abbreviation in Command-line mode: Type CTRL-V twice somewhere in
 the abbreviation to avoid it to be replaced.  A CTRL-V in front of a normal
 character is mostly ignored otherwise.
@@ -1273,6 +1285,8 @@ completion can be enabled:
 	-complete=custom,{func} custom completion, defined via {func}
 	-complete=customlist,{func} custom completion, defined via {func}
 
+Note: That some completion methods might expand environment variables.
+
 
 Custom completion			*:command-completion-custom*
 					*:command-completion-customlist*
@@ -1344,6 +1358,19 @@ Possible attributes are:
 Note that -range=N and -count=N are mutually exclusive - only one should be
 specified.
 
+					*E889* *:command-addr*
+It is possible that the special characters in the range like ., $ or % which
+by default correspond to the current line, last line and the whole buffer,
+relate to arguments, (loaded) buffers, windows or tab pages.
+
+Possible values are:
+	-addr=lines		Range of lines (this is the default)
+	-addr=arguments		Range for arguments
+	-addr=buffers		Range for buffers (also not loaded buffers)
+	-addr=loaded_buffers	Range for loaded buffers
+	-addr=windows		Range for windows
+	-addr=tabs		Range for tab pages
+
 Special cases				*:command-bang* *:command-bar*
 					*:command-register* *:command-buffer*
 There are some special cases as well:

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 7.4.  Last change: 2013 Jul 17
+*motion.txt*    For Vim version 7.4.  Last change: 2015 Jun 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -172,6 +172,8 @@ CTRL-H		or					*CTRL-H* *<BS>*
 l		or					*l*
 <Right>		or					*<Right>* *<Space>*
 <Space>			[count] characters to the right.  |exclusive| motion.
+			See the 'whichwrap' option for adjusting the behavior
+			at end of line
 
 							*0*
 0			To the first character of the line.  |exclusive|
@@ -343,7 +345,7 @@ gg			Goto line [count], default first line, on the first
 			See also 'startofline' option.  {not in Vi}
 
 :[range]go[to] [count]					*:go* *:goto* *go*
-[count]go		Go to {count} byte in the buffer.  Default [count] is
+[count]go		Go to [count] byte in the buffer.  Default [count] is
 			one, start of the file.  When giving [range], the
 			last number in it used as the byte count.  End-of-line
 			characters are counted depending on the current

runtime/doc/netbeans.txt

@@ -1,4 +1,4 @@
-*netbeans.txt*  For Vim version 7.4.  Last change: 2012 Jan 26
+*netbeans.txt*  For Vim version 7.4.  Last change: 2015 Mar 14
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur et al.
@@ -306,7 +306,12 @@ bufID		Buffer number.  A message may be either for a specific buffer
 		or generic.  Generic messages use a bufID of zero.  NOTE: this
 		buffer ID is assigned by the IDE, it is not Vim's buffer
 		number.  The bufID must be a sequentially rising number,
-		starting at one.
+		starting at one.  When the 'switchbuf' option is set to
+		"usetab" and the "bufID" buffer is not found in the current
+		tab page, the netbeans commands and functions that set this
+		buffer as the current buffer will jump to the first open
+		window that contains this buffer in other tab pages instead of
+		replacing the buffer in the current window.
 
 seqno		The IDE uses a sequence number for Commands and Functions.  A
 		Reply must use the sequence number of the Function that it is
@@ -470,7 +475,7 @@ raise		Bring the editor to the foreground.
 		New in version 2.1.
 
 removeAnno serNum
-		Remove a previously place annotation for this buffer.
+		Remove a previously placed annotation for this buffer.
 		"serNum" is the same number used in addAnno.
 
 save		Save the buffer when it was modified.  The other side of the

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.4.  Last change: 2013 Aug 22
+*options.txt*	For Vim version 7.4.  Last change: 2015 Jun 19
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -59,9 +59,7 @@ achieve special effects.  These options come in three forms:
 :se[t] {option}:{value}
 			Set string or number option to {value}.
 			For numeric options the value can be given in decimal,
-			hex (preceded with 0x) or octal (preceded with '0')
-			(hex and octal are only available for machines which
-			have the strtol() function).
+ 			hex (preceded with 0x) or octal (preceded with '0').
 			The old value can be inserted by typing 'wildchar' (by
 			default this is a <Tab> or CTRL-E if 'compatible' is
 			set).  See |cmdline-completion|.
@@ -538,11 +536,11 @@ number can be specified where "vim:" or "Vim:" is used:
 	vim<{vers}:	version before {vers}
 	vim={vers}:	version {vers}
 	vim>{vers}:	version after {vers}
-{vers} is 600 for Vim 6.0 (hundred times the major version plus minor).
-For example, to use a modeline only for Vim 6.0 and later:
-	/* vim600: set foldmethod=marker: */ ~
-To use a modeline for Vim before version 5.7:
-	/* vim<570: set sw=4: */ ~
+{vers} is 700 for Vim 7.0 (hundred times the major version plus minor).
+For example, to use a modeline only for Vim 7.0:
+	/* vim700: set foldmethod=marker */ ~
+To use a modeline for Vim after version 7.2:
+	/* vim>702: set cole=2: */ ~
 There can be no blanks between "vim" and the ":".
 
 
@@ -730,8 +728,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	open a file, switch buffers, delete a buffer or open/close a window.
 	It will change to the directory containing the file which was opened
 	or selected.
-	This option is provided for backward compatibility with the Vim
-	released with Sun ONE Studio 4 Enterprise Edition.
 	Note: When this option is on some plugins may not work.
 
 				*'arabic'* *'arab'* *'noarabic'* *'noarab'*
@@ -921,7 +917,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'backupcopy'* *'bkc'*
 'backupcopy' 'bkc'	string	(Vi default for Unix: "yes", otherwise: "auto")
-			global
+			global or local to buffer |global-local|
 			{not in Vi}
 	When writing a file and a backup is made, this option tells how it's
 	done.  This is a comma separated list of words.
@@ -987,7 +983,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'backupdir'* *'bdir'*
 'backupdir' 'bdir'	string	(default for Amiga: ".,t:",
-				 for MS-DOS and Win32: ".,c:/tmp,c:/temp"
+				 for MS-DOS and Win32: ".,$TEMP,c:/tmp,c:/temp"
 				 for Unix: ".,~/tmp,~/")
 			global
 			{not in Vi}
@@ -1200,6 +1196,38 @@ A jump table for the options with a short description can be found at |Q_op|.
 	break if 'linebreak' is on.  Only works for ASCII and also for 8-bit
 	characters when 'encoding' is an 8-bit encoding.
 
+						*'breakindent'* *'bri'*
+'breakindent' 'bri'	boolean (default off)
+			local to window
+			{not in Vi}
+			{not available when compiled without the |+linebreak|
+			feature}
+	Every wrapped line will continue visually indented (same amount of
+	space as the beginning of that line), thus preserving horizontal blocks
+	of text.
+
+						*'breakindentopt'* *'briopt'*
+'breakindentopt' 'briopt' string (default empty)
+			local to window
+			{not in Vi}
+			{not available when compiled without the |+linebreak|
+			feature}
+	Settings for 'breakindent'. It can consist of the following optional
+	items and must be separated by a comma:
+		min:{n}	    Minimum text width that will be kept after
+			    applying 'breakindent', even if the resulting
+			    text should normally be narrower. This prevents
+			    text indented almost to the right window border
+			    occupying lot of vertical space when broken.
+		shift:{n}   After applying 'breakindent', the wrapped line's
+			    beginning will be shifted by the given number of
+			    characters.  It permits dynamic French paragraph
+			    indentation (negative) or emphasizing the line
+			    continuation (positive).
+		sbr	    Display the 'showbreak' value before applying the 
+			    additional indent.
+	The default value for min is 20 and shift is 0.
+
 						*'browsedir'* *'bsdir'*
 'browsedir' 'bsdir'	string	(default: "last")
 			global
@@ -1288,6 +1316,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	nofile only:	The buffer name is fixed, it is not handled like a
 			file name.  It is not modified in response to a |:cd|
 			command.
+	both:		When using ":e bufname" and already editing "bufname"
+			the buffer is made empty and autocommands are
+			triggered as usual for |:edit|.
 							*E676*
 	"acwrite" implies that the buffer name is not related to a file, like
 	"nofile", but it will be written.  Thus, in contrast to "nofile" and
@@ -2189,7 +2220,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 
 						*'cryptmethod'* *'cm'*
-'cryptmethod'		string	(default "zip")
+'cryptmethod' 'cm'	string	(default "zip")
 			global or local to buffer |global-local|
 			{not in Vi}
 	Method used for encryption when the buffer is written to a file:
@@ -2197,10 +2228,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   zip		PkZip compatible method.  A weak kind of encryption.
 			Backwards compatible with Vim 7.2 and older.
 							*blowfish*
-	   blowfish	Blowfish method.  Strong encryption.  Requires Vim 7.3
-			or later, files can NOT be read by Vim 7.2 and older.
-			This adds a "seed" to the file, every time you write
-			the file the encrypted bytes will be different.
+	   blowfish	Blowfish method.  Medium strong encryption but it has
+			an implementation flaw.  Requires Vim 7.3 or later,
+			files can NOT be read by Vim 7.2 and older.  This adds
+			a "seed" to the file, every time you write the file
+			the encrypted bytes will be different.
+							*blowfish2*
+	   blowfish2	Blowfish method.  Medium strong encryption.  Requires
+			Vim 7.4.399 or later, files can NOT be read by Vim 7.3
+			and older.  This adds a "seed" to the file, every time
+			you write the file the encrypted bytes will be
+			different.  The whole undo file is encrypted, not just
+			the pieces of text.
 
 	When reading an encrypted file 'cryptmethod' will be set automatically
 	to the detected method of the file being read.  Thus if you write it
@@ -2477,7 +2516,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'directory'* *'dir'*
 'directory' 'dir'	string	(default for Amiga: ".,t:",
-				 for MS-DOS and Win32: ".,c:\tmp,c:\temp"
+				 for MS-DOS and Win32: ".,$TEMP,c:\tmp,c:\temp"
 				 for Unix: ".,~/tmp,/var/tmp,/tmp")
 			global
 	List of directory names for the swap file, separated with commas.
@@ -2912,8 +2951,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  2. If a <NL> is found and 'fileformats' includes "unix", 'fileformat'
 	     is set to "unix".  Note that when a <NL> is found without a
 	     preceding <CR>, "unix" is preferred over "dos".
-	  3. If 'fileformat' has not yet been set, and if 'fileformats'
-	     includes "mac", 'fileformat' is set to "mac".
+	  3. If 'fileformat' has not yet been set, and if a <CR> is found, and
+	     if 'fileformats' includes "mac", 'fileformat' is set to "mac".
 	     This means that "mac" is only chosen when:
 	      "unix" is not present or no <NL> is found in the file, and
 	      "dos" is not present or no <CR><NL> is found in the file.
@@ -3329,7 +3368,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	NOTE: This option is reset when 'compatible' is set.
 
 						*'grepformat'* *'gfm'*
-'grepformat' 'gfm'	string	(default "%f:%l%m,%f  %l%m")
+'grepformat' 'gfm'	string	(default "%f:%l:%m,%f:%l%m,%f  %l%m")
 			global
 			{not in Vi}
 	Format to recognize for the ":grep" command output.
@@ -3381,7 +3420,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	the height of the cursor can be changed.  This can be done by
 	specifying a block cursor, or a percentage for a vertical or
 	horizontal cursor.
-	For a console the 't_SI' and 't_EI' escape sequences are used.
+	For a console the 't_SI', 't_SR', and 't_EI' escape sequences are
+	used.
 
 	The option is a comma separated list of parts.  Each part consist of a
 	mode-list and an argument-list:
@@ -3920,12 +3960,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 	NOTE: This option is reset when 'compatible' is set.
 
 						*'history'* *'hi'*
-'history' 'hi'		number	(Vim default: 20, Vi default: 0)
+'history' 'hi'		number	(Vim default: 50, Vi default: 0)
 			global
 			{not in Vi}
 	A history of ":" commands, and a history of previous search patterns
-	are remembered.  This option decides how many entries may be stored in
+	is remembered.  This option decides how many entries may be stored in
 	each of these histories (see |cmdline-editing|).
+	The maximum value is 10000.
 	NOTE: This option is set to the Vi default value when 'compatible' is
 	set and to the Vim default value when 'compatible' is reset.
 
@@ -3968,6 +4009,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	When Vim was compiled with HAVE_X11 defined, the original icon will be
 	restored if possible |X11|.  See |X11-icon| for changing the icon on
 	X11.
+	For MS-Windows the icon can be changed, see |windows-icon|.
 
 						*'iconstring'*
 'iconstring'		string	(default "")
@@ -4492,6 +4534,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 	be able to execute Normal mode commands.
 	This is the opposite of the 'keymap' option, where characters are
 	mapped in Insert mode.
+	Also consider setting 'langnoremap' to avoid 'langmap' applies to
+	characters resulting from a mapping.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
 
 	Example (for Greek, in UTF-8):				*greek*  >
 	    :set langmap=ΑA,ΒB,ΨC,ΔD,ΕE,ΦF,ΓG,ΗH,ΙI,ΞJ,ΚK,ΛL,ΜM,ΝN,ΟO,ΠP,QQ,ΡR,ΣS,ΤT,ΘU,ΩV,WW,ΧX,ΥY,ΖZ,αa,βb,ψc,δd,εe,φf,γg,ηh,ιi,ξj,κk,λl,μm,νn,οo,πp,qq,ρr,σs,τt,θu,ωv,ςw,χx,υy,ζz
@@ -4545,6 +4591,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 		:source $VIMRUNTIME/menu.vim
 <	Warning: This deletes all menus that you defined yourself!
 
+					*'langnoremap'* *'lnr'*
+'langnoremap' 'lnr'	boolean (default off)
+			global
+			{not in Vi}
+			{only available when compiled with the |+langmap|
+			feature}
+	When on, setting 'langmap' does not apply to characters resulting from
+	a mapping.  This basically means, if you noticed that setting
+	'langmap' disables some of your mappings, try setting this option.
+	This option defaults to off for backwards compatibility.  Set it on if
+	that works for you to avoid mappings to break.
+
 					*'laststatus'* *'ls'*
 'laststatus' 'ls'	number	(default 1)
 			global
@@ -4572,12 +4630,13 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 			{not available when compiled without the |+linebreak|
 			feature}
-	If on Vim will wrap long lines at a character in 'breakat' rather
+	If on, Vim will wrap long lines at a character in 'breakat' rather
 	than at the last character that fits on the screen.  Unlike
 	'wrapmargin' and 'textwidth', this does not insert <EOL>s in the file,
-	it only affects the way the file is displayed, not its contents.  The
-	value of 'showbreak' is used to put in front of wrapped lines.
-	This option is not used when the 'wrap' option is off or 'list' is on.
+	it only affects the way the file is displayed, not its contents.
+	If 'breakindent' is set, line is visually indented. Then, the value
+	of 'showbreak' is used to put in front of wrapped lines. This option
+	is not used when the 'wrap' option is off.
 	Note that <Tab> characters after an <EOL> are mostly not displayed
 	with the right amount of white space.
 
@@ -4629,7 +4688,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 						*'lispwords'* *'lw'*
 'lispwords' 'lw'	string	(default is very long)
-			global
+			global or local to buffer |global-local|
 			{not in Vi}
 			{not available when compiled without the |+lispindent|
 			feature}
@@ -4658,33 +4717,38 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	Strings to use in 'list' mode and for the |:list| command.  It is a
 	comma separated list of string settings.
-	  						*lcs-eol*
+							*lcs-eol*
 	  eol:c		Character to show at the end of each line.  When
 			omitted, there is no extra character at the end of the
 			line.
-	  						*lcs-tab*
+							*lcs-tab*
 	  tab:xy	Two characters to be used to show a tab.  The first
 			char is used once.  The second char is repeated to
 			fill the space that the tab normally occupies.
 			"tab:>-" will show a tab that takes four spaces as
 			">---".  When omitted, a tab is show as ^I.
-	  						*lcs-trail*
+							*lcs-space*
+	  space:c	Character to show for a space.  When omitted, spaces
+			are left blank.
+							*lcs-trail*
 	  trail:c	Character to show for trailing spaces.  When omitted,
-			trailing spaces are blank.
-	  						*lcs-extends*
+			trailing spaces are blank.  Overrides the "space"
+			setting for trailing spaces.
+							*lcs-extends*
 	  extends:c	Character to show in the last column, when 'wrap' is
 			off and the line continues beyond the right of the
 			screen.
-	  						*lcs-precedes*
+							*lcs-precedes*
 	  precedes:c	Character to show in the first column, when 'wrap'
 			is off and there is text preceding the character
 			visible in the first column.
-	  						*lcs-conceal*
+							*lcs-conceal*
 	  conceal:c	Character to show in place of concealed text, when
 			'conceallevel' is set to 1.
-	  						*lcs-nbsp*
-	  nbsp:c	Character to show for a non-breakable space (character
-			0xA0, 160).  Left blank when omitted.
+							*lcs-nbsp*
+	  nbsp:c	Character to show for a non-breakable space character
+			(0xA0 (160 decimal) and U+202F).  Left blank when
+			omitted.
 
 	The characters ':' and ',' should not be used.  UTF-8 characters can
 	be used when 'encoding' is "utf-8", otherwise only printable
@@ -4695,7 +4759,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	    :set lcs=tab:>-,eol:<,nbsp:%
 	    :set lcs=extends:>,precedes:<
 <	The "NonText" highlighting will be used for "eol", "extends" and
-	"precedes".  "SpecialKey" for "nbsp", "tab" and "trail".
+	"precedes".  "SpecialKey" for "nbsp", "space", "tab" and "trail".
 	|hl-NonText| |hl-SpecialKey|
 
 			*'lpl'* *'nolpl'* *'loadplugins'* *'noloadplugins'*
@@ -4757,8 +4821,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global or local to buffer |global-local|
 			{not in Vi}
 	Program to use for the ":make" command.  See |:make_makeprg|.
-	This option may contain '%' and '#' characters, which are expanded to
-	the current and alternate file name. |:_%| |:_#|
+	This option may contain '%' and '#' characters (see  |:_%| and |:_#|), 
+	which are expanded to the current and alternate file name.  Use |::S| 
+	to escape file names in case they contain special characters.
 	Environment variables are expanded |:set_env|.  See |option-backslash|
 	about including spaces and backslashes.
 	Note that a '|' must be escaped twice: once for ":set" and once for
@@ -5332,7 +5397,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Expression which is evaluated to apply a patch to a file and generate
 	the resulting new version of the file.  See |diff-patchexpr|.
 
-						*'patchmode'* *'pm'* *E206*
+					*'patchmode'* *'pm'* *E205* *E206*
 'patchmode' 'pm'	string	(default "")
 			global
 			{not in Vi}
@@ -5580,6 +5645,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Note that when using the NFA engine and the pattern contains something
 	that is not supported the pattern will not match.  This is only useful
 	for debugging the regexp engine.
+	Using automatic selection enables Vim to switch the engine, if the
+	default engine becomes too costly.  E.g., when the NFA engine uses too
+	many states.  This should prevent Vim from hanging on a combination of
+	a complex pattern with long text.
 
 		*'relativenumber'* *'rnu'* *'norelativenumber'* *'nornu'*
 'relativenumber' 'rnu'	boolean	(default off)
@@ -5613,6 +5682,77 @@ A jump table for the options with a short description can be found at |Q_op|.
 	this option at the default "on".  Only switch it off when working with
 	old Vi scripts.
 
+                                               *'renderoptions'* *'rop'*
+'renderoptions' 'rop'	string  (default: empty)
+			global
+			{not in Vi}
+			{only available when compiled with GUI and DIRECTX on
+			MS-Windows}
+	Select a text renderer and set its options.  The options depend on the
+	renderer.
+
+	Syntax: >
+		set rop=type:{renderer}(,{name}:{value})*
+<
+	Currently, only one optional renderer is available.
+
+	render	behavior    ~
+	directx	Vim will draw text using DirectX (DirectWrite).  It makes
+		drawn glyphs more beautiful than default GDI.
+		It requires 'encoding' is "utf-8", and only works on
+		MS-Windows Vista or newer version.
+
+		Options:
+		  name	    meaning		type	value       ~
+		  gamma	    gamma		float	1.0 - 2.2 (maybe)
+		  contrast  enhancedContrast	float	(unknown)
+		  level	    clearTypeLevel	float	(unknown)
+		  geom	    pixelGeometry	int	0 - 2 (see below)
+		  renmode   renderingMode	int	0 - 6 (see below)
+		  taamode   textAntialiasMode	int	0 - 3 (see below)
+
+		See this URL for detail:
+		  http://msdn.microsoft.com/en-us/library/dd368190.aspx
+
+		For geom: structure of a device pixel.
+		  0 - DWRITE_PIXEL_GEOMETRY_FLAT
+		  1 - DWRITE_PIXEL_GEOMETRY_RGB
+		  2 - DWRITE_PIXEL_GEOMETRY_BGR
+
+		See this URL for detail:
+		  http://msdn.microsoft.com/en-us/library/dd368114.aspx
+
+		For renmode: method of rendering glyphs.
+		  0 - DWRITE_RENDERING_MODE_DEFAULT
+		  1 - DWRITE_RENDERING_MODE_ALIASED
+		  2 - DWRITE_RENDERING_MODE_GDI_CLASSIC
+		  3 - DWRITE_RENDERING_MODE_GDI_NATURAL
+		  4 - DWRITE_RENDERING_MODE_NATURAL
+		  5 - DWRITE_RENDERING_MODE_NATURAL_SYMMETRIC
+		  6 - DWRITE_RENDERING_MODE_OUTLINE
+
+		See this URL for detail:
+		  http://msdn.microsoft.com/en-us/library/dd368118.aspx
+
+		For taamode: antialiasing mode used for drawing text.
+		  0 - D2D1_TEXT_ANTIALIAS_MODE_DEFAULT
+		  1 - D2D1_TEXT_ANTIALIAS_MODE_CLEARTYPE
+		  2 - D2D1_TEXT_ANTIALIAS_MODE_GRAYSCALE
+		  3 - D2D1_TEXT_ANTIALIAS_MODE_ALIASED
+
+		See this URL for detail:
+		  http://msdn.microsoft.com/en-us/library/dd368170.aspx
+
+		Example: >
+		  set encoding=utf-8
+		  set gfn=Ricty_Diminished:h12:cSHIFTJIS
+		  set rop=type:directx
+<
+		If select a raster font (Courier, Terminal or FixedSys) to
+		'guifont', it fallbacks to be drawn by GDI automatically.
+
+	Other render types are currently not supported.
+
 						*'report'*
 'report'		number	(default 2)
 			global
@@ -6251,6 +6391,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  A	don't give the "ATTENTION" message when an existing swap file
 		is found.
 	  I	don't give the intro message when starting Vim |:intro|.
+	  c	don't give |ins-completion-menu| messages.  For example,
+		"-- XXX completion (YYY)", "match 1 of 2", "The only match",
+		"Pattern not found", "Back at original", etc.
 
 	This gives you the opportunity to avoid that a change between buffers
 	requires you to hit <Enter>, but still gives as useful a message as
@@ -6555,6 +6698,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	region by listing them: "en_us,en_ca" supports both US and Canadian
 	English, but not words specific for Australia, New Zealand or Great
 	Britain.
+	If the name "cjk" is included East Asian characters are excluded from
+	spell checking.  This is useful when editing text that also has Asian
+	words.
 							*E757*
 	As a special case the name of a .spl file can be given as-is.  The
 	first "_xx" in the name is removed and used as the region name
@@ -6615,6 +6761,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 			top of the suggestion list with the internal methods.
 			Lines without a slash are ignored, use this for
 			comments.
+			The word in the second column must be correct,
+			otherwise it will not be used.  Add the word to an
+			".add" file if it is currently flagged as a spelling
+			mistake.
 			The file is used for all languages.
 
 	expr:{expr}	Evaluate expression {expr}.  Use a function to avoid
@@ -6878,6 +7028,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	immediately deleted.  When 'swapfile' is set, and 'updatecount' is
 	non-zero, a swap file is immediately created.
 	Also see |swap-file| and |'swapsync'|.
+	If you want to open a new buffer without creating a swap file for it,
+	use the |:noswapfile| modifier.
 
 	This option is used together with 'bufhidden' and 'buftype' to
 	specify special kinds of buffers.   See |special-buffers|.
@@ -6915,6 +7067,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   split	If included, split the current window before loading
 			a buffer for a |quickfix| command that display errors.
 			Otherwise: do not split, use current window.
+	   vsplit	Just like "split" but split vertically.
 	   newtab	Like "split", but open a new tab page.  Overrules
 			"split" when both are present.
 
@@ -7498,8 +7651,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 				"s"  = button state
 				"c"  = column plus 33
 				"r"  = row plus 33
-			This only works up to 223 columns!  See "dec" for a
-			solution.
+			This only works up to 223 columns!  See "dec",
+			"urxvt", and "sgr" for solutions.
 	   xterm2	Works like "xterm", but with the xterm reporting the
 			mouse position while the mouse is dragged.  This works
 			much faster and more precise.  Your xterm must at
@@ -7521,29 +7674,35 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   pterm	QNX pterm mouse handling.
 							*urxvt-mouse*
 	   urxvt	Mouse handling for the urxvt (rxvt-unicode) terminal.
+			The mouse works only if the terminal supports this
+			encoding style, but it does not have 223 columns limit
+			unlike "xterm" or "xterm2".
 							*sgr-mouse*
 	   sgr		Mouse handling for the terminal that emits SGR-styled
-			mouse reporting. Works with xterm version 277 or
-			later.
+			mouse reporting.  The mouse works even in columns
+			beyond 223.  This option is backward compatible with
+			"xterm2" because it can also decode "xterm2" style
+			mouse codes.
 
 	The mouse handling must be enabled at compile time |+mouse_xterm|
-	|+mouse_dec| |+mouse_netterm|.
+	|+mouse_dec| |+mouse_netterm| |+mouse_jsbterm| |+mouse_urxvt|
+	|+mouse_sgr|.
 	Only "xterm"(2) is really recognized.  NetTerm mouse codes are always
 	recognized, if enabled at compile time.  DEC terminal mouse codes
 	are recognized if enabled at compile time, and 'ttymouse' is not
-	"xterm" (because the xterm and dec mouse codes conflict).
+	"xterm", "xterm2", "urxvt" or "sgr" (because dec mouse codes conflict
+	with them).
 	This option is automatically set to "xterm", when the 'term' option is
-	set to a name that starts with "xterm", and 'ttymouse' is not "xterm"
-	or "xterm2" already.  The main use of this option is to set it to
-	"xterm", when the terminal name doesn't start with "xterm", but it can
-	handle xterm mouse codes.
-	The "sgr" value will be set if the xterm version is 277 or later.
+	set to a name that starts with "xterm", "mlterm", or "screen", and
+	'ttymouse' is not set already.
+	Additionally, if vim is compiled with the |+termresponse| feature and
+	|t_RV| is set to the escape sequence to request the xterm version
+	number, more intelligent detection process runs.
 	The "xterm2" value will be set if the xterm version is reported to be
-	95 or higher.  This only works when compiled with the |+termresponse|
-	feature and if |t_RV| is set to the escape sequence to request the
-	xterm version number.  Otherwise "xterm2" must be set explicitly.
-	If you do not want 'ttymouse' to be set to "xterm2" automatically, set
-	t_RV to an empty string: >
+	from 95 to 276.  The "sgr" value will be set if the xterm version is
+	277 or highter.
+	If you do not want 'ttymouse' to be set to "xterm2" or "sgr"
+	automatically, set t_RV to an empty string: >
 		:set t_RV=
 <
 						*'ttyscroll'* *'tsl'*
@@ -7609,6 +7768,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	current buffer: >
 		setlocal ul=-1
 <	This helps when you run out of memory for a single change.
+
+	The local value is set to -123456 when the global value is to be used.
+
 	Also see |clear-undo|.
 
 						*'undoreload'* *'ur'*
@@ -7716,6 +7878,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			fold options
 	   options	options and mappings local to a window or buffer (not
 			global values for local options)
+	   localoptions same as "options"
 	   slash	backslashes in file names replaced with forward
 			slashes
 	   unix		with Unix end-of-line format (single <NL>), even when

runtime/doc/os_vms.txt

@@ -1,4 +1,4 @@
-*os_vms.txt*    For Vim version 7.4.  Last change: 2013 Aug 22
+*os_vms.txt*    For Vim version 7.4.  Last change: 2014 Aug 29
 
 
 		  VIM REFERENCE MANUAL
@@ -764,6 +764,22 @@ GNU_TOOLS.ZIP package downloadable from http://www.polarhome.com/vim/
 
 9. VMS related changes					*vms-changes*
 
+Version 7.4 
+- Undo: VMS can not handle more than one dot in the filenames use "dir/name" -> "dir/_un_name" 
+  add _un_ at the beginning to keep the extension
+- correct swap file name wildcard handling
+- handle iconv usage correctly
+- do not optimize on vax - otherwise it hangs compiling crypto files
+- fileio.c fix the comment
+- correct RealWaitForChar 
+- after 7.4-119 use different functions lib$cvtf_to_internal_time because Alpha and VAX have
+  G_FLOAT but IA64 uses IEEE float otherwise Vim crashes
+- guard against crashes that are caused by mixed filenames
+- [TESTDIR]make_vms.mms changed to see the output files
+- Improve tests, update known issues
+- minor compiler warnings fixed
+- CTAGS 5.8 +regex included
+
 Version 7.3
 - CTAGS 5.8 included
 - VMS compile warnings fixed - floating-point overflow warning corrected on VAX

runtime/doc/os_win32.txt

@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 7.4.  Last change: 2012 May 18
+*os_win32.txt*  For Vim version 7.4.  Last change: 2014 Sep 25
 
 
 		  VIM REFERENCE MANUAL    by George Reilly
@@ -334,7 +334,7 @@ A. You have two possible solutions depending on what you want:
         :!start /min ctags -R .
 <  When it has finished you should see file named "tags" in your current
    directory.  You should notice the window title blinking on your taskbar.
-   This is more noticable for commands that take longer.
+   This is more noticeable for commands that take longer.
    Now delete the "tags" file and run this command: >
         :!start /b ctags -R .
 <  You should have the same "tags" file, but this time there will be no
@@ -367,4 +367,10 @@ Q. I use Vim under Win32s and NT.  In NT, I can define the console to default to
 A. Edit SYSTEM.INI and add 'ScreenLines=50' to the [NonWindowsApp] section.  DOS
    prompts and external DOS commands will now run in a 50-line window.
 
+						*windows-icon*
+Q. I don't like the Vim icon, can I change it?
+A. Yes, place your favorite icon in bitmaps/vim.ico in a directory of
+   'runtimepath'.  For example ~/vimfiles/bitmaps/vim.ico.
+
+
  vim:tw=78:fo=tcq2:ts=8:ft=help:norl:

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 7.4.  Last change: 2013 Jul 06
+*pattern.txt*   For Vim version 7.4.  Last change: 2015 Mar 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -59,6 +59,8 @@ explanations are in chapter 27 |usr_27.txt|.
 
 							*n*
 n			Repeat the latest "/" or "?" [count] times.
+			If the cursor doesn't move the search is repeated with
+			count + 1.
 			|last-pattern| {Vi: no count}
 
 							*N*
@@ -192,10 +194,10 @@ affected.
 An example of how to search for matches with a pattern and change the match
 with another word: >
 	/foo<CR>	find "foo"
-	c//e		change until end of match
+	c//e<CR>	change until end of match
 	bar<Esc>	type replacement
 	//<CR>		go to start of next match
-	c//e		change until end of match
+	c//e<CR>	change until end of match
 	beep<Esc>	type another replacement
 			etc.
 <
@@ -545,6 +547,7 @@ Character classes {not in Vi}:				*/character-classes*
 |/\%u|	\%u	\%u	match specified multibyte character (eg \%u20ac)
 |/\%U|	\%U	\%U	match specified large multibyte character (eg
 			\%U12345678)
+|/\%C|	\%C	\%C	match any composing characters
 
 Example			matches ~
 \<\I\i*		or
@@ -705,11 +708,18 @@ overview.
 	But to limit the time needed, only the line where what follows matches
 	is searched, and one line before that (if there is one).  This should
 	be sufficient to match most things and not be too slow.
-	The part of the pattern after "\@<=" and "\@<!" are checked for a
-	match first, thus things like "\1" don't work to reference \(\) inside
-	the preceding atom.  It does work the other way around:
-	Example			matches ~
-	\1\@<=,\([a-z]\+\)	",abc" in "abc,abc"
+
+	In the old regexp engine the part of the pattern after "\@<=" and
+	"\@<!" are checked for a match first, thus things like "\1" don't work
+	to reference \(\) inside the preceding atom.  It does work the other
+	way around:
+	Bad example			matches ~
+	\%#=1\1\@<=,\([a-z]\+\)		",abc" in "abc,abc"
+
+	However, the new regexp engine works differently, it is better to not
+	rely on this behavior, do not use \@<= if it can be avoided:
+	Example				matches ~
+	\([a-z]\+\)\zs,\1		",abc" in "abc,abc"
 
 \@123<=
 	Like "\@<=" but only look back 123 bytes. This avoids trying lots
@@ -821,6 +831,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	branch is used.  Example: >
 		/\(.\{-}\zsFab\)\{3}
 <	Finds the third occurrence of "Fab".
+	This cannot be followed by a multi. *E888*
 	{not in Vi} {not available when compiled without the |+syntax| feature}
 							*/\ze*
 \ze	Matches at any position, and sets the end of the match there: The
@@ -829,6 +840,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	branch is used.
 	Example: "end\ze\(if\|for\)" matches the "end" in "endif" and
 	"endfor".
+	This cannot be followed by a multi. |E888|
 	{not in Vi} {not available when compiled without the |+syntax| feature}
 
 						*/\%^* *start-of-file*
@@ -1048,7 +1060,10 @@ x	A single character, with no special meaning, matches itself
 								*E769*
 	When the ']' is not there Vim will not give an error message but
 	assume no collection is used.  Useful to search for '['.  However, you
-	do get E769 for internal searching.
+	do get E769 for internal searching.  And be aware that in a
+	`:substitute` command the whole command becomes the pattern.  E.g.
+	":s/[/x/" searches for "[/x" and replaces it with nothing.  It does
+	not search for "[" and replaces it with "x"!
 
 	If the sequence begins with "^", it matches any single character NOT
 	in the collection: "[^xyz]" matches anything but 'x', 'y' and 'z'.
@@ -1207,12 +1222,18 @@ will probably never match.
 8. Composing characters					*patterns-composing*
 
 							*/\Z*
-When "\Z" appears anywhere in the pattern, composing characters are ignored.
-Thus only the base characters need to match, the composing characters may be
-different and the number of composing characters may differ.  Only relevant
-when 'encoding' is "utf-8".
+When "\Z" appears anywhere in the pattern, all composing characters are
+ignored.  Thus only the base characters need to match, the composing
+characters may be different and the number of composing characters may differ.
+Only relevant when 'encoding' is "utf-8".
 Exception: If the pattern starts with one or more composing characters, these
 must match.
+							*/\%C*
+Use "\%C" to skip any composing characters.  For example, the pattern "a" does
+not match in "càt" (where the a has the composing character 0x0300), but
+"a\%C" does.  Note that this does not match "cát" (where the á is character
+0xe1, it does not have a compositing character).  It does match "cat" (where
+the a is just an a).
 
 When a composing character appears at the start of the pattern of after an
 item that doesn't include the composing character, a match is found at any
@@ -1325,7 +1346,7 @@ Finally, these constructs are unique to Perl:
 		patterns defined by both |matchadd()| and |:match|.
 
 		Highlighting matches using |:match| are limited to three
-		matches (aside from |:match|, |:2match| and |:3match|are
+		matches (aside from |:match|, |:2match| and |:3match| are
 		available). |matchadd()| does not have this limitation and in
 		addition makes it possible to prioritize matches.
 

runtime/doc/pi_getscript.txt

@@ -1,4 +1,4 @@
-*pi_getscript.txt*  For Vim version 7.4.  Last change: 2012 Apr 07
+*pi_getscript.txt*  For Vim version 7.0.  Last change: 2013 Nov 29
 >
 		GETSCRIPT REFERENCE MANUAL  by Charles E. Campbell
 <
@@ -385,6 +385,10 @@ The AutoInstall process will:
 ==============================================================================
 9. GetLatestVimScripts History		*getscript-history* *glvs-hist* {{{1
 
+v36 Apr 22, 2013 : * (glts) suggested use of plugin/**/*.vim instead of
+		     plugin/*.vim in globpath() call.
+		   * (Andy Wokula) got warning message when setting
+		     g:loaded_getscriptPlugin
 v35 Apr 07, 2012 : * (MengHuan Yu) pointed out that the script url has
 		     changed (somewhat).  However, it doesn't work, and
 		     the original one does (under Linux). I'll make it

runtime/doc/pi_logipat.txt

@@ -0,0 +1,117 @@
+*pi_logipat.txt*	Logical Patterns				Mar 13, 2013
+
+Author:  Charles E. Campbell  <NdrOchip@ScampbellPfamily.AbizM>
+Copyright: (c) 2004-2013 by Charles E. Campbell	*logipat-copyright*
+           The VIM LICENSE applies to LogiPat.vim and LogiPat.txt
+           (see |copyright|) except use "LogiPat" instead of "Vim"
+	   No warranty, express or implied.  Use At-Your-Own-Risk.
+
+==============================================================================
+1. Contents					*logipat* *logipat-contents*
+
+	1. Contents.................: |logipat-contents|
+	2. LogiPat Manual...........: |logipat-manual|
+	3. LogiPat Examples.........: |logipat-examples|
+	4. Caveat...................: |logipat-caveat|
+	5. LogiPat History..........: |logipat-history|
+
+==============================================================================
+2. LogiPat Manual			*logipat-manual* *logipat-man*
+
+
+	*logipat-arg* *logipat-input* *logipat-pattern* *logipat-operators*
+	Boolean logic patterns are composed of
+
+			operators  ! = not
+			           | = logical-or
+			           & = logical-and
+			grouping   ( ... )
+			patterns   "pattern"
+
+	:LogiPat {boolean-logic pattern}		*:LogiPat*
+		:LogiPat is a command which takes a boolean-logic
+		argument (|logipat-arg|).
+
+	:LP {boolean-logic pattern}			*:LP*
+		:LP is a shorthand command version of :LogiPat
+		(|:LogiPat|).
+
+	:ELP {boolean-logic pattern}			*:ELP*
+		No search is done, but the conversion from the
+		boolean logic pattern to the regular expression
+		is performed and echoed onto the display.
+
+	:LogiPatFlags {search flags}			*LogiPat-flags*
+		:LogiPatFlags {search flags}
+		LogiPat uses the |search()| command.  The flags
+		passed to that call to search() may be specified
+		by the :LogiPatFlags command.
+
+	:LPF {search flags}				*:LPF*
+		:LPF is a shorthand version of :LogiPatFlags.
+
+	:let pat=LogiPat({boolean-logic pattern})	*LogiPat()*
+		If one calls LogiPat() directly, no search
+		is done, but the transformation from the boolean
+		logic pattern into a regular expression pattern
+		is performed and returned.
+
+	To get a " inside a pattern, as opposed to having it delimit
+	the pattern, double it.
+
+==============================================================================
+3. LogiPat Examples					*logipat-examples*
+
+	LogiPat takes Boolean logic arguments and produces a regular
+	expression which implements the choices.  A series of examples
+	follows:
+>
+	:LogiPat "abc"
+<		will search for lines containing the string  :abc:
+>
+	:LogiPat "ab""cd"
+<		will search for lines containing the string  :ab"c:
+>
+	:LogiPat !"abc"
+<		will search for lines which don't contain the string  :abc:
+>
+	:LogiPat "abc"|"def"
+<		will search for lines which contain either the string
+		:abc:  or the string  :def:
+>
+	:LogiPat !("abc"|"def")
+<		will search for lines which don't contain either
+		of the strings  :abc:  or  :def:
+>
+	:LogiPat "abc"&"def"
+<		will search for lines which contain both of the strings
+		:abc:  and  :def:
+>
+	:let pat= LogiPat('!"abc"')
+<		will return the regular expression which will match
+		all lines not containing  :abc: .  The double quotes
+		are needed to pass normal patterns to LogiPat, and
+		differentiate such patterns from boolean logic
+		operators.
+
+
+==============================================================================
+4. Caveat						*logipat-caveat*
+
+	The "not" operator may be fragile; ie. it may not always play well
+	with the & (logical-and) and | (logical-or) operators.  Please try out
+	your patterns, possibly with :set hls, to insure that what is matching
+	is what you want.
+
+==============================================================================
+3. LogiPat History					*logipat-history*
+
+	v3 Sep 25, 2006 * LP_Or() fixed; it now encapsulates its output
+	                  in \%(...\) parentheses
+	   Dec 12, 2011 * |:ELP| added
+			* "" is mapped to a single " and left inside patterns
+	v2 May 31, 2005	* LPF and LogiPatFlags commands weren't working
+	v1 May 23, 2005	* initial release
+
+==============================================================================
+vim:tw=78:ts=8:ft=help

runtime/doc/print.txt

@@ -693,7 +693,7 @@ It is possible to achieve a poor man's version of duplex printing using the PS
 utility psselect.  This utility has options -e and -o for printing just the
 even or odd pages of a PS file respectively.
 
-First generate a PS file with the 'hardcopy' command, then generate a new
+First generate a PS file with the 'hardcopy' command, then generate new
 files with all the odd and even numbered pages with: >
 
 	psselect -o test.ps odd.ps

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 7.4.  Last change: 2013 Aug 03
+*quickfix.txt*  For Vim version 7.4.  Last change: 2014 Mar 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -202,8 +202,8 @@ command with 'l'.
 			the current window is used instead of the quickfix
 			list.
 
-							*:caddb* *:caddbuffer*
-:caddb[uffer] [bufnr]	Read the error list from the current buffer and add
+							*:cad* *:caddbuffer*
+:cad[dbuffer] [bufnr]	Read the error list from the current buffer and add
 			the errors to the current quickfix list.  If a
 			quickfix list is not present, then a new list is
 			created. Otherwise, same as ":cbuffer".
@@ -240,8 +240,8 @@ command with 'l'.
 :lgete[xpr] {expr}	Same as |:cgetexpr|, except the location list for the
 			current window is used instead of the quickfix list.
 
-							*:cad* *:caddexpr*
-:cad[dexpr] {expr}	Evaluate {expr} and add the resulting lines to the
+							*:cadde* *:caddexpr*
+:cadde[xpr] {expr}	Evaluate {expr} and add the resulting lines to the
 			current quickfix list. If a quickfix list is not
 			present, then a new list is created. The current
 			cursor position will not be changed. See |:cexpr| for
@@ -304,18 +304,23 @@ use this code: >
 
 					    *:cope* *:copen* *w:quickfix_title*
 :cope[n] [height]	Open a window to show the current list of errors.
+
 			When [height] is given, the window becomes that high
-			(if there is room).  Otherwise the window is made ten
-			lines high.
-			The window will contain a special buffer, with
-			'buftype' equal to "quickfix".  Don't change this!
+			(if there is room).  When [height] is omitted the
+			window is made ten lines high.
+
 			If there already is a quickfix window, it will be made
 			the current window.  It is not possible to open a
-			second quickfix window. The window will have the
-			w:quickfix_title variable set which will indicate the
-			command that produced the quickfix list. This can be
-			used to compose a custom status line if the value of
-			'statusline' is adjusted properly.
+			second quickfix window.  If [height] is given the
+			existing window will be resized to it.
+
+			The window will contain a special buffer, with
+			'buftype' equal to "quickfix".  Don't change this!
+			The window will have the w:quickfix_title variable set
+			which will indicate the command that produced the
+			quickfix list. This can be used to compose a custom
+			status line if the value of 'statusline' is adjusted
+			properly.
 
 							*:lop* *:lopen*
 :lop[en] [height]	Open a window to show the location list for the
@@ -838,7 +843,7 @@ Unfortunately, there is no standard way to run the tests.
 The alltests.py script seems to be used quite often, that's all.
 Useful values for the 'makeprg' options therefore are:
  setlocal makeprg=./alltests.py " Run a testsuite
- setlocal makeprg=python %      " Run a single testcase
+ setlocal makeprg=python\ %:S   " Run a single testcase
 
 Also see http://vim.sourceforge.net/tip_view.php?tip_id=280.
 
@@ -1332,7 +1337,7 @@ or: >
 Here is an alternative from Michael F. Lamb for Unix that filters the errors
 first: >
   :setl errorformat=%Z%f:%l:\ %m,%A%p^,%-G%*[^sl]%.%#
-  :setl makeprg=javac\ %\ 2>&1\ \\\|\ vim-javac-filter
+  :setl makeprg=javac\ %:S\ 2>&1\ \\\|\ vim-javac-filter
 
 You need to put the following in "vim-javac-filter" somewhere in your path
 (e.g., in ~/bin) and make it executable: >

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 7.4.  Last change: 2013 Jun 29
+*quickref.txt*  For Vim version 7.4.  Last change: 2014 Nov 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -624,6 +624,8 @@ Short explanation of each option:		*option-list*
 'bioskey'	  'biosk'   MS-DOS: use bios calls for input characters
 'bomb'			    prepend a Byte Order Mark to the file
 'breakat'	  'brk'     characters that may cause a line break
+'breakindent'	  'bri'     wrapped line repeats indent 
+'breakindentopt'  'briopt'  settings for 'breakindent'
 'browsedir'	  'bsdir'   which directory to start browsing in
 'bufhidden'	  'bh'	    what to do when buffer is no longer in window
 'buflisted'	  'bl'	    whether the buffer shows up in the buffer list
@@ -762,6 +764,7 @@ Short explanation of each option:		*option-list*
 'keywordprg'	  'kp'	    program to use for the "K" command
 'langmap'	  'lmap'    alphabetic characters for other language mode
 'langmenu'	  'lm'	    language to be used for the menus
+'langnoremap'	  'lnr'	    do not apply 'langmap' to mapped characters
 'laststatus'	  'ls'	    tells when last window has status lines
 'lazyredraw'	  'lz'	    don't redraw while executing macros
 'linebreak'	  'lbr'     wrap long lines at a blank
@@ -829,6 +832,7 @@ Short explanation of each option:		*option-list*
 'regexpengine'	  're'	    default regexp engine to use
 'relativenumber'  'rnu'	    show relative line number in front of each line
 'remap'			    allow mappings to work recursively
+'renderoptions'	  'rop'	    options for text rendering on Windows
 'report'		    threshold for reporting nr. of lines changed
 'restorescreen'   'rs'	    Win32: restore screen when exiting
 'revins'	  'ri'	    inserting characters will work backwards
@@ -1310,11 +1314,16 @@ Context-sensitive completion on the command-line:
 |CTRL-W_R|	CTRL-W R		rotate windows upwards
 |CTRL-W_x|	CTRL-W x		exchange current window with next one
 
-|CTRL-W_=|	CTRL-W =		make all windows equal height
+|CTRL-W_=|	CTRL-W =		make all windows equal height & width
 |CTRL-W_-|	CTRL-W -		decrease current window height
 |CTRL-W_+|	CTRL-W +		increase current window height
 |CTRL-W__|	CTRL-W _		set current window height (default:
 					   very high)
+
+|CTRL-W_<|	CTRL-W <		decrease current window width
+|CTRL-W_>|	CTRL-W >		increase current window width
+|CTRL-W_bar|	CTRL-W |		set current window width (default:
+					   widest possible)
 ------------------------------------------------------------------------------
 *Q_bu*		Buffer list commands
 

runtime/doc/quotes.txt

@@ -178,14 +178,14 @@ Hurrah for VIM!! It is "at your fingertips" like vi, and has the extensions
 that vi sorely needs: highlighting for executing commands on blocks, an easily
 navigable and digestible help screen, and more.  (Paul Pax)
 
-The reason WHY I don't have this amazingly useful macro any more, is that I
+The reason WHY I don't have this amazingly useful macro anymore, is that I
 now use VIM - and this is built in!! (Stephen Riehm, Germany)
 
 I am a user of VIM and I love it.  I use it to do all my programming, C,
 C++, HTML what ever.  (Tim Allwine)
 
 I discovered VIM after years of struggling with the original vi, and I just
-can't live without it any more.  (Emmanuel Mogenet, USA)
+can't live without it anymore.  (Emmanuel Mogenet, USA)
 
 Emacs has not a bit of chance to survive so long as VIM is around.  Besides,
 it also has the most detailed software documentation I have ever seen---much

runtime/doc/recover.txt

@@ -1,4 +1,4 @@
-*recover.txt*   For Vim version 7.4.  Last change: 2010 Jul 20
+*recover.txt*   For Vim version 7.4.  Last change: 2014 Mar 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -81,7 +81,14 @@ the amount of memory used to be higher than given with 'maxmem' or
 'maxmemtot'.  And when making a change to a read-only file, the swap file is
 created anyway.
 
-The 'swapfile' option can be reset to avoid creating a swapfile.
+The 'swapfile' option can be reset to avoid creating a swapfile.  And the
+|:noswapfile| modifier can be used to not create a swapfile for a new buffer.
+
+:nos[wapfile]   {command}			*:nos* *:noswapfile*
+		Execute {command}. If it contains a command that loads a new
+		buffer, it will be loaded without creating a swapfile and the
+		'swapfile' option will be reset.  If a buffer already had a
+		swapfile it is not removed and 'swapfile' is not reset.
 
 
 Detecting an existing swap file ~

runtime/doc/remote.txt

@@ -1,4 +1,4 @@
-*remote.txt*    For Vim version 7.4.  Last change: 2008 May 24
+*remote.txt*    For Vim version 7.4.  Last change: 2015 Mar 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -36,7 +36,8 @@ The following command line arguments are available:
 				The remote Vim is raised.  If you don't want
 				this use >
 				 vim --remote-send "<C-\><C-N>:n filename<CR>"
-<  --remote-silent [+{cmd}] {file} ...			*--remote-silent*
+<
+   --remote-silent [+{cmd}] {file} ...			*--remote-silent*
 				As above, but don't complain if there is no
 				server and the file is edited locally.
    --remote-wait [+{cmd}] {file} ...				*--remote-wait*

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 7.4.  Last change: 2013 Jul 25
+*repeat.txt*    For Vim version 7.4.  Last change: 2015 Apr 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -26,10 +26,14 @@ Chapter 26 of the user manual introduces repeating |usr_26.txt|.
 
 Simple changes can be repeated with the "." command.  Without a count, the
 count of the last change is used.  If you enter a count, it will replace the
-last one.  If the last change included a specification of a numbered register,
-the register number will be incremented.  See |redo-register| for an example
-how to use this.  Note that when repeating a command that used a Visual
-selection, the same SIZE of area is used, see |visual-repeat|.
+last one.  |v:count| and |v:count1| will be set.
+
+If the last change included a specification of a numbered register, the
+register number will be incremented.  See |redo-register| for an example how
+to use this.
+
+Note that when repeating a command that used a Visual selection, the same SIZE
+of area is used, see |visual-repeat|.
 
 							*@:*
 @:			Repeat last command-line [count] times.
@@ -60,6 +64,9 @@ replacement string.
 
 For the definition of a pattern, see |pattern|.
 
+NOTE [cmd] may contain a range; see |collapse| and |edit-paragraph-join| for
+examples.
+
 The global commands work by first scanning through the [range] lines and
 marking each line where a match occurs (for a multi-line pattern, only the
 start of the match matters).
@@ -228,8 +235,8 @@ For writing a Vim script, see chapter 41 of the user manual |usr_41.txt|.
 			command is ignored.
 			{not in Vi}
 
-						*:scrip* *:scriptnames*
-:scrip[tnames]		List all sourced script names, in the order they were
+						*:scr* *:scriptnames*
+:scr[iptnames]		List all sourced script names, in the order they were
 			first sourced.  The number is used for the script ID
 			|<SID>|.
 			{not in Vi} {not available when compiled without the
@@ -584,9 +591,16 @@ the |+reltime| feature, which is present more often.
 
 For profiling syntax highlighting see |:syntime|.
 
+For example, to profile the one_script.vim script file: >
+	:profile start /tmp/one_script_profile
+	:profile file one_script.vim
+	:source one_script.vim
+	:exit
+
 
 :prof[ile] start {fname}			*:prof* *:profile* *E750*
 		Start profiling, write the output in {fname} upon exit.
+		"~/" and environment variables in {fname} will be expanded.
 		If {fname} already exists it will be silently overwritten.
 		The variable |v:profiling| is set to one.
 
@@ -608,8 +622,10 @@ For profiling syntax highlighting see |:syntime|.
 		This only profiles the script itself, not the functions
 		defined in it.
 		When the [!] is added then all functions defined in the script
-		will also be profiled.  But only if the script is loaded after
-		this command.
+		will also be profiled.
+		Note that profiling only starts when the script is loaded
+		after this command.  A :profile command in the script itself
+		won't work.
 
 
 :profd[el] ...						*:profd* *:profdel*

runtime/doc/sign.txt

@@ -1,4 +1,4 @@
-*sign.txt*      For Vim version 7.4.  Last change: 2012 Jul 10
+*sign.txt*      For Vim version 7.4.  Last change: 2014 May 07
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -137,6 +137,7 @@ PLACING SIGNS						*:sign-place* *E158*
 :sign place {id} line={lnum} name={name} buffer={nr}
 		Same, but use buffer {nr}.
 
+							*E885*
 :sign place {id} name={name} file={fname}
 		Change the placed sign {id} in file {fname} to use the defined
 		sign {name}.  See remark above about {fname} |:sign-fname|.
@@ -173,7 +174,7 @@ REMOVING SIGNS						*:sign-unplace* *E159*
 		Remove the placed sign at the cursor position.
 
 
-LISTING PLACED SIGNS
+LISTING PLACED SIGNS					*:sign-place-list*
 
 :sign place file={fname}
 		List signs placed in file {fname}.

runtime/doc/spell.txt

@@ -1,4 +1,4 @@
-*spell.txt*	For Vim version 7.4.  Last change: 2013 Jul 17
+*spell.txt*	For Vim version 7.4.  Last change: 2014 Sep 19
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -269,6 +269,13 @@ In a table:
 	latin1		yi		transliterated Yiddish
 	utf-8		yi-tr		transliterated Yiddish
 
+							*spell-cjk*
+Chinese, Japanese and other East Asian characters are normally marked as
+errors, because spell checking of these characters is not supported. If
+'spelllang' includes "cjk", these characters are not marked as errors.  This
+is useful when editing text with spell checking while some Asian words are
+present.
+
 
 SPELL FILES						*spell-load*
 
@@ -932,9 +939,10 @@ be combined without errors.
 
 If you get an E763 warning that the word tables differ you need to update your
 ".spl" spell files.  If you downloaded the files, get the latest version of
-all spell files you use.  Otherwise generate the .spl file again with
-|:mkspell|.  If you still get errors check the FOL, LOW and UPP lines in the
-used .aff files.
+all spell files you use.  If you are only using one, e.g., German, then also
+download the recent English spell files.  Otherwise generate the .spl file
+again with |:mkspell|.  If you still get errors check the FOL, LOW and UPP
+lines in the used .aff files.
 
 The XX.ascii.spl spell file generated with the "-ascii" argument will not
 contain the table with characters, so that it can be combine with spell files
@@ -1050,6 +1058,9 @@ this text to start with a "#" so that mistakes don't go unnoticed.  Example:
 	SFX F 0 in   [^i]n      # Spion > Spionin  ~
 	SFX F 0 nen  in		# Bauerin > Bauerinnen ~
 
+However, to avoid lots of errors in affix files written for Myspell, you can
+add the IGNOREEXTRA flag.
+
 Apparently Myspell allows an affix name to appear more than once.  Since this
 might also be a mistake, Vim checks for an extra "S".  The affix files for
 Myspell that use this feature apparently have this flag.  Example:
@@ -1103,6 +1114,14 @@ Specifically, the affix flags can be used for:
 - CIRCUMFIX, as explained just below.
 
 
+IGNOREEXTRA						*spell-IGNOREEXTRA*
+
+Normally Vim gives an error for an extra field that does not start with '#'.
+This avoids errors going unnoticed.  However, some files created for Myspell
+or Hunspell may contain many entries with an extra field.  Use the IGNOREEXTRA
+flag to avoid lots of errors.
+
+
 CIRCUMFIX						*spell-CIRCUMFIX*
 
 The CIRCUMFIX flag means a prefix and suffix must be added at the same time.

runtime/doc/starting.txt

@@ -1,4 +1,4 @@
-*starting.txt*  For Vim version 7.4.  Last change: 2013 Jul 20
+*starting.txt*  For Vim version 7.4.  Last change: 2014 Jul 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -167,7 +167,10 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 							*-+/*
 +/{pat}		The cursor will be positioned on the first line containing
 		"pat" in the first file being edited (see |pattern| for the
-		available search patterns).
+		available search patterns).  The search starts at the cursor
+		position, which can be the first line or the cursor position
+		last used from |viminfo|. To force a search from the first
+		line use "+1 +/pat".
 
 +{command}						*-+c* *-c*
 -c {command}	{command} will be executed after the first file has been
@@ -1276,8 +1279,10 @@ triggered.
 			When [!] is included an existing file is overwritten.
 			When [file] is omitted or is a number from 1 to 9, a
 			name is generated and 'viewdir' prepended.  When the
-			last directory name in 'viewdir' does not exist, this
-			directory is created.
+			last path part of 'viewdir' does not exist, this
+			directory is created.  E.g., when 'viewdir' is
+			"$VIM/vimfiles/view" then "view" is created in
+			"$VIM/vimfiles".
 			An existing file is always overwritten then.  Use
 			|:loadview| to load this view again.
 			When [file] is the name of a file ('viewdir' is not
@@ -1501,7 +1506,7 @@ most of the information will be restored).
 			already set (registers, marks, |v:oldfiles|, etc.)
 			will be overwritten   {not in Vi}
 
-					*:wv* *:wviminfo* *E137* *E138* *E574*
+				*:wv* *:wviminfo* *E137* *E138* *E574* *E886*
 :wv[iminfo][!] [file]	Write to viminfo file [file] (default: see above).
 			The information in the file is first read in to make
 			a merge between old and new info.  When [!] is used,

runtime/doc/syntax.txt

@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 7.4.  Last change: 2013 Aug 22
+*syntax.txt*	For Vim version 7.4.  Last change: 2015 Mar 29
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -211,7 +211,8 @@ thing.  These are then linked to a highlight group that specifies the color.
 A syntax group name doesn't specify any color or attributes itself.
 
 The name for a highlight or syntax group must consist of ASCII letters, digits
-and the underscore.  As a regexp: "[a-zA-Z0-9_]*"
+and the underscore.  As a regexp: "[a-zA-Z0-9_]*".  However, Vim does not give
+an error when using other characters.
 
 To be able to allow each user to pick his favorite set of colors, there must
 be preferred names for highlight groups that are common for many languages.
@@ -501,7 +502,7 @@ inserted for that purpose if no line numbers are shown. This ID attribute
 takes the form of L123 for single-buffer HTML pages, or W2L123 for diff-view
 pages, and is used to jump to a specific line (in a specific window of a diff
 view). Javascript is inserted to open any closed dynamic folds
-(|g:html_dynamic_folds|) containing the specificed line before jumping. The
+(|g:html_dynamic_folds|) containing the specified line before jumping. The
 javascript also allows omitting the window ID in the url, and the leading L.
 For example: >
 
@@ -1022,6 +1023,21 @@ Or to avoid the highlighting: >
 This works immediately.
 
 
+CLOJURE							*ft-clojure-syntax*
+
+Setting *g:clojure_fold* enables folding Clojure code via the syntax engine.
+Any list, vector, or map that extends over more than one line can be folded
+using the standard Vim |fold-commands|.
+
+Please note that this option does not work with scripts that redefine the
+bracket syntax regions, such as rainbow-parentheses plugins.
+
+This option is off by default.
+>
+	" Default
+	let g:clojure_fold = 0
+<
+
 COBOL						*cobol.vim* *ft-cobol-syntax*
 
 COBOL highlighting has different needs for legacy code than it does for fresh
@@ -1113,6 +1129,16 @@ to standard by placing this in your vimrc file: >
 	:let enforce_freedesktop_standard = 1
 
 
+DIFF							*diff.vim*
+
+The diff highlighting normally finds translated headers.  This can be slow if
+there are very long lines in the file.  To disable translations: >
+
+	:let diff_translations = 0
+
+Also see |diff-slow|.
+
+
 DIRCOLORS			       *dircolors.vim* *ft-dircolors-syntax*
 
 The dircolors utility highlighting definition has one option.  It exists to
@@ -1281,6 +1307,32 @@ Finally, some vendors support hexadecimal constants.  To handle them, add >
 to your startup file.
 
 
+EUPHORIA	    *euphoria3.vim* *euphoria4.vim* *ft-euphoria-syntax*
+
+Two syntax highlighting files exists for Euphoria. One for Euphoria 
+version 3.1.1, which is the default syntax highlighting file, and one for 
+Euphoria version 4.0.5 or later.
+
+Euphoria version 3.1.1 (http://www.rapideuphoria.com/) is still necessary 
+for developing applications for the DOS platform, which Euphoria version 4 
+(http://www.openeuphoria.org/) does not support.
+
+The following file extensions are auto-detected as Euphoria file type: 
+    
+	*.e, *.eu, *.ew, *.ex, *.exu, *.exw
+	*.E, *.EU, *.EW, *.EX, *.EXU, *.EXW
+
+To select syntax highlighting file for Euphoria, as well as for 
+auto-detecting the *.e and *.E file extensions as Euphoria file type,
+add the following line to your startup file: >
+
+	:let filetype_euphoria="euphoria3"
+
+	or 
+
+	:let filetype_euphoria="euphoria4"
+
+
 ERLANG						*erlang.vim* *ft-erlang-syntax*
 
 Erlang is a functional programming language developed by Ericsson.  Files with
@@ -1647,7 +1699,7 @@ vimrc file: >
 HTML comments are rather special (see an HTML reference document for the
 details), and the syntax coloring scheme will highlight all errors.
 However, if you prefer to use the wrong style (starts with <!-- and
-ends with --!>) you can define >
+ends with -->) you can define >
 	:let html_wrong_comments=1
 
 JavaScript and Visual Basic embedded inside HTML documents are highlighted as
@@ -1918,7 +1970,7 @@ If you don't want to set the variable, use the modeline in EVERY LPC file.
 There are several implementations for LPC, we intend to support most widely
 used ones.  Here the default LPC syntax is for MudOS series, for MudOS v22
 and before, you should turn off the sensible modifiers, and this will also
-asserts the new efuns after v22 to be invalid, don't set this variable when
+assert the new efuns after v22 to be invalid, don't set this variable when
 you are using the latest version of MudOS: >
 
 	:let lpc_pre_v22 = 1
@@ -2238,7 +2290,7 @@ files, you may set the 'perl_include_pod' option to 0: >
 
 	:let perl_include_pod = 0
 
-The reduce the complexity of parsing (and increase performance) you can switch
+To reduce the complexity of parsing (and increase performance) you can switch
 off two elements in the parsing of variable names and contents. >
 
 To handle package references in variable and function names not differently
@@ -2934,6 +2986,7 @@ TEX				*tex.vim* *ft-tex-syntax* *latex-syntax*
 	Tex: Taking Advantage of Conceal Mode		|tex-conceal|
 	Tex: Selective Conceal Mode			|g:tex_conceal|
 	Tex: Controlling iskeyword			|g:tex_isk|
+	Tex: Fine Subscript and Superscript Control	|tex-supersub|
 
 				*tex-folding* *g:tex_fold_enabled*
  Tex: Want Syntax Folding? ~
@@ -3027,6 +3080,7 @@ selectively to enable just some syntax highlighting: >
 <
 As an example, let g:tex_fast= "M" will allow math-associated highlighting
 but suppress all the other region-based syntax highlighting.
+(also see: |g:tex_conceal| and |tex-supersub|)
 
 					*tex-morecommands* *tex-package*
  Tex: Want To Highlight More Commands? ~
@@ -3128,6 +3182,28 @@ syntax highlighting script handles this with the following logic:
 	* If g:tex_isk exists, then it will be used for the local 'iskeyword'
 	* Else the local 'iskeyword' will be set to 48-57,a-z,A-Z,192-255
 
+			*tex-supersub* *g:tex_superscripts* *g:tex_subscripts*
+ Tex: Fine Subscript and Superscript Control~
+
+	See |tex-conceal| for how to enable concealed character replacement.
+
+	See |g:tex_conceal| for selectively concealing accents, bold/italic,
+	math, Greek, and superscripts/subscripts.
+
+	One may exert fine control over which superscripts and subscripts one
+	wants syntax-based concealment for (see |:syn-cchar|).  Since not all
+	fonts support all characters, one may override the
+	concealed-replacement lists; by default these lists are given by: >
+
+	    let g:tex_superscripts= "[0-9a-zA-W.,:;+-<>/()=]"
+	    let g:tex_subscripts= "[0-9aehijklmnoprstuvx,+-/().]"
+<
+	For example, I use Luxi Mono Bold; it doesn't support subscript
+	characters for "hklmnpst", so I put >
+		let g:tex_subscripts= "[0-9aeijoruvx,+-/().]"
+<	in ~/.vim/ftplugin/tex/tex.vim in order to avoid having inscrutable
+	utf-8 glyphs appear.
+
 
 TF						*tf.vim* *ft-tf-syntax*
 
@@ -3246,6 +3322,32 @@ must not click outside of the pixel strings, but feel free to improve it.
 It will look much better with a font in a quadratic cell size, e.g. for X: >
 	:set guifont=-*-clean-medium-r-*-*-8-*-*-*-*-80-*
 
+
+YAML						*yaml.vim* *ft-yaml-syntax*
+
+					*g:yaml_schema* *b:yaml_schema*
+A YAML schema is a combination of a set of tags and a mechanism for resolving 
+non-specific tags. For user this means that YAML parser may, depending on 
+plain scalar contents, treat plain scalar (which can actually be only string 
+and nothing else) as a value of the other type: null, boolean, floating-point, 
+integer. `g:yaml_schema` option determines according to which schema values 
+will be highlighted specially. Supported schemas are
+
+Schema		Description ~
+failsafe	No additional highlighting.
+json		Supports JSON-style numbers, booleans and null.
+core		Supports more number, boolean and null styles.
+pyyaml		In addition to core schema supports highlighting timestamps, 
+		but there are some differences in what is recognized as 
+		numbers and many additional boolean values not present in core 
+		schema.
+
+Default schema is `core`.
+
+Note that schemas are not actually limited to plain scalars, but this is the 
+only difference between schemas defined in YAML specification and the only 
+difference defined in the syntax file.
+
 ==============================================================================
 5. Defining a syntax					*:syn-define* *E410*
 
@@ -3734,7 +3836,7 @@ The 'foldnestmax' option limits the nesting of syntax folds.
 
 
 			*:syn-contains* *E405* *E406* *E407* *E408* *E409*
-contains={groupname},..
+contains={group-name},..
 
 The "contains" argument is followed by a list of syntax group names.  These
 groups will be allowed to begin inside the item (they may extend past the
@@ -3787,13 +3889,13 @@ region where contained items do match.	Note that this may also limit the
 area that is highlighted
 
 
-containedin={groupname}...				*:syn-containedin*
+containedin={group-name}...				*:syn-containedin*
 
 The "containedin" argument is followed by a list of syntax group names.  The
 item will be allowed to begin inside these groups.  This works as if the
 containing item has a "contains=" argument that includes this item.
 
-The {groupname}... can be used just like for "contains", as explained above.
+The {group-name}... can be used just like for "contains", as explained above.
 
 This is useful when adding a syntax item afterwards.  An item can be told to
 be included inside an already existing item, without changing the definition
@@ -3809,7 +3911,7 @@ keywords never contain another item, thus adding them to "containedin" won't
 work.
 
 
-nextgroup={groupname},..				*:syn-nextgroup*
+nextgroup={group-name},..				*:syn-nextgroup*
 
 The "nextgroup" argument is followed by a list of syntax group names,
 separated by commas (just like with "contains", so you can also use patterns).
@@ -4178,7 +4280,7 @@ If the "maxlines={N}" argument is given, the number of lines that are searched
 for a comment or syncing pattern is restricted to N lines backwards (after
 adding "minlines").  This is useful if you have few things to sync on and a
 slow machine.  Example: >
-   :syntax sync ccomment maxlines=500
+   :syntax sync maxlines=500 ccomment
 <
 						*:syn-sync-linebreaks*
 When using a pattern that matches multiple lines, a change in one line may
@@ -4572,6 +4674,8 @@ ctermbg={color-nr}				*highlight-ctermbg*
 	Note that for some color terminals these names may result in the wrong
 	colors!
 
+	You can also use "NONE" to remove the color.
+
 							*:hi-normal-cterm*
 	When setting the "ctermfg" or "ctermbg" colors for the Normal group,
 	these will become the colors used for the non-highlighted text.
@@ -5000,6 +5104,7 @@ This will set the "w:current_syntax" variable to "foo".  The value of
 restoring "b:current_syntax", since the syntax files do set
 "b:current_syntax".  The value set by the syntax file is assigned to
 "w:current_syntax".
+Note: This resets the 'spell', 'spellcapcheck' and 'spellfile' options.
 
 Once a window has its own syntax, syntax commands executed from other windows
 on the same buffer (including :syntax clear) have no effect. Conversely,

runtime/doc/tabpage.txt

@@ -1,4 +1,4 @@
-*tabpage.txt*   For Vim version 7.4.  Last change: 2012 Aug 08
+*tabpage.txt*   For Vim version 7.4.  Last change: 2015 Jan 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -61,16 +61,25 @@ In the GUI tab pages line you can use the right mouse button to open menu.
 :[count]tabe[dit]				*:tabe* *:tabedit* *:tabnew*
 :[count]tabnew
 		Open a new tab page with an empty window, after the current
-		tab page.  For [count] see |:tab| below.
+		tab page.  If [count] is given the new tab page appears after
+		the tab page [count] otherwise the new tab page will appear
+		after the current one. >
+		    :tabnew	" opens tabpage after the current one
+		    :.tabnew	" as above
+		    :+tabnew	" opens tabpage after the next tab page
+				" note: it is one further than :tabnew
+		    :-tabnew	" opens tabpage before the current one
+		    :0tabnew	" opens tabpage before the first one
+		    :$tabnew	" opens tabpage after the last one
 
 :[count]tabe[dit] [++opt] [+cmd] {file}
 :[count]tabnew [++opt] [+cmd] {file}
 		Open a new tab page and edit {file}, like with |:edit|.
-		For [count] see |:tab| below.
+		For [count] see |:tabnew| above.
 
 :[count]tabf[ind] [++opt] [+cmd] {file}			*:tabf* *:tabfind*
 		Open a new tab page and edit {file} in 'path', like with
-		|:find|.  For [count] see |:tab| below.
+		|:find|.  For [count] see |:tabnew| above.
 		{not available when the |+file_in_path| feature was disabled
 		at compile time}
 
@@ -110,12 +119,18 @@ something else.
 		- When 'hidden' is not set, [!] is not used, a buffer has
 		  changes, and there is no other window on this buffer.
 		Changes to the buffer are not written and won't get lost, so
-		this is a "safe" command.
+		this is a "safe" command. >
+		    :tabclose	    " close the current tab page
 
+:{count}tabc[lose][!]
 :tabc[lose][!] {count}
 		Close tab page {count}.  Fails in the same way as `:tabclose`
-		above.
-
+		above. >
+		    :-tabclose	    " close the previous tab page
+		    :+tabclose	    " close the next tab page
+		    :1tabclose	    " close the first tab page
+		    :$tabclose	    " close the last tab page
+<
 							*:tabo* *:tabonly*
 :tabo[nly][!]	Close all other tab pages.
 		When the 'hidden' option is set, all buffers in closed windows
@@ -124,7 +139,17 @@ something else.
 		modified buffers are written.  Otherwise, windows that have
 		buffers that are modified are not removed, unless the [!] is
 		given, then they become hidden.  But modified buffers are
-		never abandoned, so changes cannot get lost.
+		never abandoned, so changes cannot get lost. >
+		    :tabonly	    " close all tab pages except the current
+
+:{count}tabo[nly][!]
+		Close all tab pages except the {count}th one. >
+		    :.tabonly	    " one
+		    :-tabonly	    " close all tab pages except the previous
+				    " one
+		    :+tabonly	    " close all tab pages except the next one
+		    :1tabonly	    " close all tab pages except the first one
+		    :$tabonly	    " close all tab pages except the last one
 
 
 SWITCHING TO ANOTHER TAB PAGE:
@@ -176,23 +201,39 @@ REORDERING TAB PAGES:
 :[N]tabm[ove]
 		Move the current tab page to after tab page N.  Use zero to
 		make the current tab page the first one.  Without N the tab
-		page is made the last one.
+		page is made the last one. >
+		    :.tabmove	" do nothing
+		    :-tabmove	" move the tab page to the left
+		    :+tabmove	" move the tab page to the right
+		    :0tabmove	" move the tab page to the beginning of the tab
+				" list
+		    :tabmove 0	" as above
+		    :tabmove	" move the tab page to the last
+		    :$tabmove	" as above
+		    :tabmove $	" as above
 
 :tabm[ove] +[N]
 :tabm[ove] -[N]
 		Move the current tab page N places to the right (with +) or to
-		the left (with -).
+		the left (with -). >
+		    :tabmove -	" move the tab page to the left
+		    :tabmove -1	" as above
+		    :tabmove +	" move the tab page to the right
+		    :tabmove +1	" as above
+
 
 Note that although it is possible to move a tab behind the N-th one by using
-:Ntabmove, it is impossible to move it by N places by using :+Ntabmove. For
-clarification what +N means in this context see |[range]|.
+:Ntabmove. And move it by N places by using :+Ntabmove. For clarification what
++N means in this context see |[range]|.
 
 
 LOOPING OVER TAB PAGES:
 
 							*:tabd* *:tabdo*
-:tabd[o] {cmd}	Execute {cmd} in each tab page.
-		It works like doing this: >
+:[range]tabd[o] {cmd}
+		Execute {cmd} in each tab page or if [range] is given only in
+		tab pages which tab page number is in the [range].  It works
+		like doing this: >
 			:tabfirst
 			:{cmd}
 			:tabnext
@@ -238,8 +279,8 @@ window on the same buffer and then edit another buffer.  Thus ":tabnew"
 triggers:
 	WinLeave		leave current window
 	TabLeave		leave current tab page
-	TabEnter		enter new tab page
 	WinEnter		enter window in new tab page
+	TabEnter		enter new tab page
 	BufLeave		leave current buffer
 	BufEnter		enter new empty buffer
 

runtime/doc/tags

@@ -12,6 +12,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 %	motion.txt	/*%*
 %:.	cmdline.txt	/*%:.*
 %:8	cmdline.txt	/*%:8*
+%:S	cmdline.txt	/*%:S*
 %:e	cmdline.txt	/*%:e*
 %:gs	cmdline.txt	/*%:gs*
 %:h	cmdline.txt	/*%:h*
@@ -90,6 +91,10 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 'bl'	options.txt	/*'bl'*
 'bomb'	options.txt	/*'bomb'*
 'breakat'	options.txt	/*'breakat'*
+'breakindent'	options.txt	/*'breakindent'*
+'breakindentopt'	options.txt	/*'breakindentopt'*
+'bri'	options.txt	/*'bri'*
+'briopt'	options.txt	/*'briopt'*
 'brk'	options.txt	/*'brk'*
 'browsedir'	options.txt	/*'browsedir'*
 'bs'	options.txt	/*'bs'*
@@ -387,6 +392,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 'kp'	options.txt	/*'kp'*
 'langmap'	options.txt	/*'langmap'*
 'langmenu'	options.txt	/*'langmenu'*
+'langnoremap'	options.txt	/*'langnoremap'*
 'laststatus'	options.txt	/*'laststatus'*
 'lazyredraw'	options.txt	/*'lazyredraw'*
 'lbr'	options.txt	/*'lbr'*
@@ -400,6 +406,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 'listchars'	options.txt	/*'listchars'*
 'lm'	options.txt	/*'lm'*
 'lmap'	options.txt	/*'lmap'*
+'lnr'	options.txt	/*'lnr'*
 'loadplugins'	options.txt	/*'loadplugins'*
 'lpl'	options.txt	/*'lpl'*
 'ls'	options.txt	/*'ls'*
@@ -751,6 +758,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 'regexpengine'	options.txt	/*'regexpengine'*
 'relativenumber'	options.txt	/*'relativenumber'*
 'remap'	options.txt	/*'remap'*
+'renderoptions'	options.txt	/*'renderoptions'*
 'report'	options.txt	/*'report'*
 'restorescreen'	options.txt	/*'restorescreen'*
 'revins'	options.txt	/*'revins'*
@@ -761,6 +769,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 'rlc'	options.txt	/*'rlc'*
 'rnu'	options.txt	/*'rnu'*
 'ro'	options.txt	/*'ro'*
+'rop'	options.txt	/*'rop'*
 'rs'	options.txt	/*'rs'*
 'rtp'	options.txt	/*'rtp'*
 'ru'	options.txt	/*'ru'*
@@ -920,9 +929,11 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 't_KJ'	term.txt	/*'t_KJ'*
 't_KK'	term.txt	/*'t_KK'*
 't_KL'	term.txt	/*'t_KL'*
+'t_RB'	term.txt	/*'t_RB'*
 't_RI'	term.txt	/*'t_RI'*
 't_RV'	term.txt	/*'t_RV'*
 't_SI'	term.txt	/*'t_SI'*
+'t_SR'	term.txt	/*'t_SR'*
 't_Sb'	term.txt	/*'t_Sb'*
 't_Sf'	term.txt	/*'t_Sf'*
 't_WP'	term.txt	/*'t_WP'*
@@ -986,6 +997,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 't_ve'	term.txt	/*'t_ve'*
 't_vi'	term.txt	/*'t_vi'*
 't_vs'	term.txt	/*'t_vs'*
+'t_xn'	term.txt	/*'t_xn'*
 't_xs'	term.txt	/*'t_xs'*
 'ta'	options.txt	/*'ta'*
 'tabline'	options.txt	/*'tabline'*
@@ -1166,6 +1178,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 +dialog_gui	various.txt	/*+dialog_gui*
 +diff	various.txt	/*+diff*
 +digraphs	various.txt	/*+digraphs*
++directx	various.txt	/*+directx*
 +dnd	various.txt	/*+dnd*
 +emacs_tags	various.txt	/*+emacs_tags*
 +eval	various.txt	/*+eval*
@@ -1200,6 +1213,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 +mouse	various.txt	/*+mouse*
 +mouse_dec	various.txt	/*+mouse_dec*
 +mouse_gpm	various.txt	/*+mouse_gpm*
++mouse_jsbterm	various.txt	/*+mouse_jsbterm*
 +mouse_netterm	various.txt	/*+mouse_netterm*
 +mouse_pterm	various.txt	/*+mouse_pterm*
 +mouse_sgr	various.txt	/*+mouse_sgr*
@@ -1387,6 +1401,8 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 .dic	spell.txt	/*.dic*
 .exrc	starting.txt	/*.exrc*
 .gvimrc	gui.txt	/*.gvimrc*
+.netrwbook	pi_netrw.txt	/*.netrwbook*
+.netrwhist	pi_netrw.txt	/*.netrwhist*
 .vimrc	starting.txt	/*.vimrc*
 /	pattern.txt	/*\/*
 /$	pattern.txt	/*\/$*
@@ -1414,6 +1430,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 /\%>c	pattern.txt	/*\/\\%>c*
 /\%>l	pattern.txt	/*\/\\%>l*
 /\%>v	pattern.txt	/*\/\\%>v*
+/\%C	pattern.txt	/*\/\\%C*
 /\%U	pattern.txt	/*\/\\%U*
 /\%V	pattern.txt	/*\/\\%V*
 /\%[]	pattern.txt	/*\/\\%[]*
@@ -1788,6 +1805,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :3match	pattern.txt	/*:3match*
 ::.	cmdline.txt	/*::.*
 ::8	cmdline.txt	/*::8*
+::S	cmdline.txt	/*::S*
 ::e	cmdline.txt	/*::e*
 ::gs	cmdline.txt	/*::gs*
 ::h	cmdline.txt	/*::h*
@@ -1820,6 +1838,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :CompilerSet	usr_41.txt	/*:CompilerSet*
 :DiffOrig	diff.txt	/*:DiffOrig*
 :DoMatchParen	pi_paren.txt	/*:DoMatchParen*
+:ELP	pi_logipat.txt	/*:ELP*
 :Explore	pi_netrw.txt	/*:Explore*
 :GLVS	pi_getscript.txt	/*:GLVS*
 :GetLatestVimScripts_dat	pi_getscript.txt	/*:GetLatestVimScripts_dat*
@@ -1827,6 +1846,10 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :GnatPretty	ft_ada.txt	/*:GnatPretty*
 :GnatTags	ft_ada.txt	/*:GnatTags*
 :Hexplore	pi_netrw.txt	/*:Hexplore*
+:LP	pi_logipat.txt	/*:LP*
+:LPF	pi_logipat.txt	/*:LPF*
+:Lexplore	pi_netrw.txt	/*:Lexplore*
+:LogiPat	pi_logipat.txt	/*:LogiPat*
 :Man	filetype.txt	/*:Man*
 :MkVimball	pi_vimball.txt	/*:MkVimball*
 :N	editing.txt	/*:N*
@@ -1838,6 +1861,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :Nread	pi_netrw.txt	/*:Nread*
 :Ns	pi_netrw.txt	/*:Ns*
 :Nsource	pi_netrw.txt	/*:Nsource*
+:Ntree	pi_netrw.txt	/*:Ntree*
 :Nw	pi_netrw.txt	/*:Nw*
 :Nwrite	pi_netrw.txt	/*:Nwrite*
 :P	various.txt	/*:P*
@@ -1969,8 +1993,8 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :cabc	map.txt	/*:cabc*
 :cabclear	map.txt	/*:cabclear*
 :cad	quickfix.txt	/*:cad*
-:caddb	quickfix.txt	/*:caddb*
 :caddbuffer	quickfix.txt	/*:caddbuffer*
+:cadde	quickfix.txt	/*:cadde*
 :caddexpr	quickfix.txt	/*:caddexpr*
 :caddf	quickfix.txt	/*:caddf*
 :caddfile	quickfix.txt	/*:caddfile*
@@ -2042,6 +2066,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :comc	map.txt	/*:comc*
 :comclear	map.txt	/*:comclear*
 :command	map.txt	/*:command*
+:command-addr	map.txt	/*:command-addr*
 :command-bang	map.txt	/*:command-bang*
 :command-bar	map.txt	/*:command-bar*
 :command-buffer	map.txt	/*:command-buffer*
@@ -2214,6 +2239,9 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :foldopen	fold.txt	/*:foldopen*
 :for	eval.txt	/*:for*
 :fu	eval.txt	/*:fu*
+:func-abort	eval.txt	/*:func-abort*
+:func-dict	eval.txt	/*:func-dict*
+:func-range	eval.txt	/*:func-range*
 :function	eval.txt	/*:function*
 :function-verbose	eval.txt	/*:function-verbose*
 :g	repeat.txt	/*:g*
@@ -2232,6 +2260,8 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :ha	print.txt	/*:ha*
 :hardcopy	print.txt	/*:hardcopy*
 :help	helphelp.txt	/*:help*
+:helpc	helphelp.txt	/*:helpc*
+:helpclose	helphelp.txt	/*:helpclose*
 :helpf	helphelp.txt	/*:helpf*
 :helpfind	helphelp.txt	/*:helpfind*
 :helpg	helphelp.txt	/*:helpg*
@@ -2300,6 +2330,8 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :keepj	motion.txt	/*:keepj*
 :keepjumps	motion.txt	/*:keepjumps*
 :keepmarks	motion.txt	/*:keepmarks*
+:keepp	cmdline.txt	/*:keepp*
+:keeppatterns	cmdline.txt	/*:keeppatterns*
 :l	various.txt	/*:l*
 :lN	quickfix.txt	/*:lN*
 :lNext	quickfix.txt	/*:lNext*
@@ -2491,6 +2523,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :nbkey	netbeans.txt	/*:nbkey*
 :nbstart	netbeans.txt	/*:nbstart*
 :ne	editing.txt	/*:ne*
+:netrw-s-cr	pi_netrw.txt	/*:netrw-s-cr*
 :new	windows.txt	/*:new*
 :next	editing.txt	/*:next*
 :next_f	editing.txt	/*:next_f*
@@ -2511,8 +2544,11 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :noautocmd	autocmd.txt	/*:noautocmd*
 :noh	pattern.txt	/*:noh*
 :nohlsearch	pattern.txt	/*:nohlsearch*
+:nor	map.txt	/*:nor*
+:nore	map.txt	/*:nore*
 :norea	map.txt	/*:norea*
 :noreabbrev	map.txt	/*:noreabbrev*
+:norem	map.txt	/*:norem*
 :noremap	map.txt	/*:noremap*
 :noremap!	map.txt	/*:noremap!*
 :noreme	gui.txt	/*:noreme*
@@ -2520,6 +2556,8 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :norm	various.txt	/*:norm*
 :normal	various.txt	/*:normal*
 :normal-range	various.txt	/*:normal-range*
+:nos	recover.txt	/*:nos*
+:noswapfile	recover.txt	/*:noswapfile*
 :nu	various.txt	/*:nu*
 :number	various.txt	/*:number*
 :nun	map.txt	/*:nun*
@@ -2697,7 +2735,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :sbr	windows.txt	/*:sbr*
 :sbrewind	windows.txt	/*:sbrewind*
 :sbuffer	windows.txt	/*:sbuffer*
-:scrip	repeat.txt	/*:scrip*
+:scr	repeat.txt	/*:scr*
 :scripte	repeat.txt	/*:scripte*
 :scriptencoding	repeat.txt	/*:scriptencoding*
 :scriptnames	repeat.txt	/*:scriptnames*
@@ -2732,7 +2770,6 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :sfirst	windows.txt	/*:sfirst*
 :sh	various.txt	/*:sh*
 :shell	various.txt	/*:shell*
-:si	gui_w32.txt	/*:si*
 :sig	sign.txt	/*:sig*
 :sign	sign.txt	/*:sign*
 :sign-define	sign.txt	/*:sign-define*
@@ -2740,10 +2777,12 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 :sign-jump	sign.txt	/*:sign-jump*
 :sign-list	sign.txt	/*:sign-list*
 :sign-place	sign.txt	/*:sign-place*
+:sign-place-list	sign.txt	/*:sign-place-list*
 :sign-undefine	sign.txt	/*:sign-undefine*
 :sign-unplace	sign.txt	/*:sign-unplace*
 :sil	various.txt	/*:sil*
 :silent	various.txt	/*:silent*
+:sim	gui_w32.txt	/*:sim*
 :simalt	gui_w32.txt	/*:simalt*
 :sl	various.txt	/*:sl*
 :sla	windows.txt	/*:sla*
@@ -3107,6 +3146,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 <CSI>	intro.txt	/*<CSI>*
 <Char->	map.txt	/*<Char->*
 <Char>	map.txt	/*<Char>*
+<CursorHold>	autocmd.txt	/*<CursorHold>*
 <D-	intro.txt	/*<D-*
 <Del>	change.txt	/*<Del>*
 <Down>	motion.txt	/*<Down>*
@@ -3429,6 +3469,7 @@ CTRL-^	editing.txt	/*CTRL-^*
 CTRL-{char}	intro.txt	/*CTRL-{char}*
 Chinese	mbyte.txt	/*Chinese*
 Cmd-event	autocmd.txt	/*Cmd-event*
+CmdUndefined	autocmd.txt	/*CmdUndefined*
 Cmdline	cmdline.txt	/*Cmdline*
 Cmdline-mode	cmdline.txt	/*Cmdline-mode*
 CmdwinEnter	autocmd.txt	/*CmdwinEnter*
@@ -3570,7 +3611,7 @@ E201	autocmd.txt	/*E201*
 E202	options.txt	/*E202*
 E203	autocmd.txt	/*E203*
 E204	autocmd.txt	/*E204*
-E205	if_pyth.txt	/*E205*
+E205	options.txt	/*E205*
 E206	options.txt	/*E206*
 E207	editing.txt	/*E207*
 E208	message.txt	/*E208*
@@ -4296,6 +4337,15 @@ E878	pattern.txt	/*E878*
 E879	syntax.txt	/*E879*
 E88	windows.txt	/*E88*
 E880	if_pyth.txt	/*E880*
+E881	autocmd.txt	/*E881*
+E882	eval.txt	/*E882*
+E883	eval.txt	/*E883*
+E884	eval.txt	/*E884*
+E885	sign.txt	/*E885*
+E886	starting.txt	/*E886*
+E887	if_pyth.txt	/*E887*
+E888	pattern.txt	/*E888*
+E889	map.txt	/*E889*
 E89	message.txt	/*E89*
 E90	message.txt	/*E90*
 E91	options.txt	/*E91*
@@ -4376,6 +4426,8 @@ L	motion.txt	/*L*
 Linux-backspace	options.txt	/*Linux-backspace*
 List	eval.txt	/*List*
 Lists	eval.txt	/*Lists*
+LogiPat()	pi_logipat.txt	/*LogiPat()*
+LogiPat-flags	pi_logipat.txt	/*LogiPat-flags*
 Lua	if_lua.txt	/*Lua*
 M	motion.txt	/*M*
 MDI	starting.txt	/*MDI*
@@ -4425,6 +4477,13 @@ Operator-pending-mode	intro.txt	/*Operator-pending-mode*
 OverTheSpot	mbyte.txt	/*OverTheSpot*
 P	change.txt	/*P*
 PATHEXT	eval.txt	/*PATHEXT*
+PHP_BracesAtCodeLevel	indent.txt	/*PHP_BracesAtCodeLevel*
+PHP_autoformatcomment	indent.txt	/*PHP_autoformatcomment*
+PHP_default_indenting	indent.txt	/*PHP_default_indenting*
+PHP_outdentSLComments	indent.txt	/*PHP_outdentSLComments*
+PHP_outdentphpescape	indent.txt	/*PHP_outdentphpescape*
+PHP_removeCRwhenUnix	indent.txt	/*PHP_removeCRwhenUnix*
+PHP_vintage_case_default_indent	indent.txt	/*PHP_vintage_case_default_indent*
 Pattern	pattern.txt	/*Pattern*
 Perl	if_perl.txt	/*Perl*
 Posix	intro.txt	/*Posix*
@@ -4504,6 +4563,7 @@ SourcePre	autocmd.txt	/*SourcePre*
 SpellFileMissing	autocmd.txt	/*SpellFileMissing*
 StdinReadPost	autocmd.txt	/*StdinReadPost*
 StdinReadPre	autocmd.txt	/*StdinReadPre*
+String	eval.txt	/*String*
 SwapExists	autocmd.txt	/*SwapExists*
 Syntax	autocmd.txt	/*Syntax*
 T	motion.txt	/*T*
@@ -4768,6 +4828,7 @@ argidx()	eval.txt	/*argidx()*
 arglist	editing.txt	/*arglist*
 arglist-position	editing.txt	/*arglist-position*
 arglist-quit	usr_07.txt	/*arglist-quit*
+arglistid()	eval.txt	/*arglistid()*
 argument-list	editing.txt	/*argument-list*
 argv()	eval.txt	/*argv()*
 as	motion.txt	/*as*
@@ -4822,6 +4883,7 @@ b:current_syntax-variable	syntax.txt	/*b:current_syntax-variable*
 b:netrw_lastfile	pi_netrw.txt	/*b:netrw_lastfile*
 b:tex_stylish	syntax.txt	/*b:tex_stylish*
 b:var	eval.txt	/*b:var*
+b:yaml_schema	syntax.txt	/*b:yaml_schema*
 baan-folding	syntax.txt	/*baan-folding*
 baan-syntax	syntax.txt	/*baan-syntax*
 baan.vim	syntax.txt	/*baan.vim*
@@ -4865,6 +4927,7 @@ blockwise-operators	visual.txt	/*blockwise-operators*
 blockwise-register	change.txt	/*blockwise-register*
 blockwise-visual	visual.txt	/*blockwise-visual*
 blowfish	options.txt	/*blowfish*
+blowfish2	options.txt	/*blowfish2*
 bold	syntax.txt	/*bold*
 bom-bytes	mbyte.txt	/*bom-bytes*
 book	intro.txt	/*book*
@@ -4902,6 +4965,7 @@ builtin_terms	term.txt	/*builtin_terms*
 byte-count	editing.txt	/*byte-count*
 byte2line()	eval.txt	/*byte2line()*
 byteidx()	eval.txt	/*byteidx()*
+byteidxcomp()	eval.txt	/*byteidxcomp()*
 bzip2	pi_gzip.txt	/*bzip2*
 c	change.txt	/*c*
 c.vim	syntax.txt	/*c.vim*
@@ -5352,6 +5416,7 @@ diW	motion.txt	/*diW*
 dialog	gui_w32.txt	/*dialog*
 dialogs-added	version5.txt	/*dialogs-added*
 dib	motion.txt	/*dib*
+dict	eval.txt	/*dict*
 dict-functions	usr_41.txt	/*dict-functions*
 dict-identity	eval.txt	/*dict-identity*
 dict-modification	eval.txt	/*dict-modification*
@@ -5362,9 +5427,12 @@ diff-mode	diff.txt	/*diff-mode*
 diff-options	diff.txt	/*diff-options*
 diff-original-file	diff.txt	/*diff-original-file*
 diff-patchexpr	diff.txt	/*diff-patchexpr*
+diff-slow	diff.txt	/*diff-slow*
 diff.txt	diff.txt	/*diff.txt*
+diff.vim	syntax.txt	/*diff.vim*
 diff_filler()	eval.txt	/*diff_filler()*
 diff_hlID()	eval.txt	/*diff_hlID()*
+diff_translations	diff.txt	/*diff_translations*
 digraph	digraph.txt	/*digraph*
 digraph-arg	change.txt	/*digraph-arg*
 digraph-encoding	digraph.txt	/*digraph-encoding*
@@ -5425,6 +5493,7 @@ edit-dialogs	editing.txt	/*edit-dialogs*
 edit-files	editing.txt	/*edit-files*
 edit-intro	editing.txt	/*edit-intro*
 edit-no-break	usr_25.txt	/*edit-no-break*
+edit-paragraph-join	usr_25.txt	/*edit-paragraph-join*
 editing.txt	editing.txt	/*editing.txt*
 efm-%>	quickfix.txt	/*efm-%>*
 efm-entries	quickfix.txt	/*efm-entries*
@@ -5460,6 +5529,8 @@ errors	message.txt	/*errors*
 escape	intro.txt	/*escape*
 escape()	eval.txt	/*escape()*
 escape-bar	version4.txt	/*escape-bar*
+euphoria3.vim	syntax.txt	/*euphoria3.vim*
+euphoria4.vim	syntax.txt	/*euphoria4.vim*
 eval	eval.txt	/*eval*
 eval()	eval.txt	/*eval()*
 eval-examples	eval.txt	/*eval-examples*
@@ -5494,6 +5565,7 @@ exclusive	motion.txt	/*exclusive*
 exclusive-linewise	motion.txt	/*exclusive-linewise*
 executable()	eval.txt	/*executable()*
 execute-menus	gui.txt	/*execute-menus*
+exepath()	eval.txt	/*exepath()*
 exim	starting.txt	/*exim*
 exists()	eval.txt	/*exists()*
 exp()	eval.txt	/*exp()*
@@ -5710,6 +5782,7 @@ ft-changelog-plugin	filetype.txt	/*ft-changelog-plugin*
 ft-changelog-syntax	syntax.txt	/*ft-changelog-syntax*
 ft-chill-syntax	syntax.txt	/*ft-chill-syntax*
 ft-clojure-indent	indent.txt	/*ft-clojure-indent*
+ft-clojure-syntax	syntax.txt	/*ft-clojure-syntax*
 ft-cobol-syntax	syntax.txt	/*ft-cobol-syntax*
 ft-coldfusion-syntax	syntax.txt	/*ft-coldfusion-syntax*
 ft-cpp-syntax	syntax.txt	/*ft-cpp-syntax*
@@ -5726,6 +5799,7 @@ ft-dosbatch-syntax	syntax.txt	/*ft-dosbatch-syntax*
 ft-dtd-syntax	syntax.txt	/*ft-dtd-syntax*
 ft-eiffel-syntax	syntax.txt	/*ft-eiffel-syntax*
 ft-erlang-syntax	syntax.txt	/*ft-erlang-syntax*
+ft-euphoria-syntax	syntax.txt	/*ft-euphoria-syntax*
 ft-flexwiki-syntax	syntax.txt	/*ft-flexwiki-syntax*
 ft-form-syntax	syntax.txt	/*ft-form-syntax*
 ft-fortran-indent	indent.txt	/*ft-fortran-indent*
@@ -5819,6 +5893,7 @@ ft-xhtml-omni	insert.txt	/*ft-xhtml-omni*
 ft-xml-omni	insert.txt	/*ft-xml-omni*
 ft-xml-syntax	syntax.txt	/*ft-xml-syntax*
 ft-xpm-syntax	syntax.txt	/*ft-xpm-syntax*
+ft-yaml-syntax	syntax.txt	/*ft-yaml-syntax*
 ft_ada.txt	ft_ada.txt	/*ft_ada.txt*
 ft_sql.txt	ft_sql.txt	/*ft_sql.txt*
 ftdetect	filetype.txt	/*ftdetect*
@@ -5878,6 +5953,8 @@ g:ada_standard_types	ft_ada.txt	/*g:ada_standard_types*
 g:ada_with_gnat_project_files	ft_ada.txt	/*g:ada_with_gnat_project_files*
 g:ada_withuse_ordinary	ft_ada.txt	/*g:ada_withuse_ordinary*
 g:clojure_align_multiline_strings	indent.txt	/*g:clojure_align_multiline_strings*
+g:clojure_align_subforms	indent.txt	/*g:clojure_align_subforms*
+g:clojure_fold	syntax.txt	/*g:clojure_fold*
 g:clojure_fuzzy_indent	indent.txt	/*g:clojure_fuzzy_indent*
 g:clojure_fuzzy_indent_blacklist	indent.txt	/*g:clojure_fuzzy_indent_blacklist*
 g:clojure_fuzzy_indent_patterns	indent.txt	/*g:clojure_fuzzy_indent_patterns*
@@ -5926,6 +6003,7 @@ g:html_use_css	syntax.txt	/*g:html_use_css*
 g:html_use_encoding	syntax.txt	/*g:html_use_encoding*
 g:html_use_xhtml	syntax.txt	/*g:html_use_xhtml*
 g:html_whole_filler	syntax.txt	/*g:html_whole_filler*
+g:netrw_altfile	pi_netrw.txt	/*g:netrw_altfile*
 g:netrw_alto	pi_netrw.txt	/*g:netrw_alto*
 g:netrw_altv	pi_netrw.txt	/*g:netrw_altv*
 g:netrw_banner	pi_netrw.txt	/*g:netrw_banner*
@@ -5946,6 +6024,8 @@ g:netrw_dynamic_maxfilenamelen	pi_netrw.txt	/*g:netrw_dynamic_maxfilenamelen*
 g:netrw_errorlvl	pi_netrw.txt	/*g:netrw_errorlvl*
 g:netrw_fastbrowse	pi_netrw.txt	/*g:netrw_fastbrowse*
 g:netrw_fetch_cmd	pi_netrw.txt	/*g:netrw_fetch_cmd*
+g:netrw_ffkeep	pi_netrw.txt	/*g:netrw_ffkeep*
+g:netrw_file_cmd	pi_netrw.txt	/*g:netrw_file_cmd*
 g:netrw_fname_escape	pi_netrw.txt	/*g:netrw_fname_escape*
 g:netrw_ftp	pi_netrw.txt	/*g:netrw_ftp*
 g:netrw_ftp_browse_reject	pi_netrw.txt	/*g:netrw_ftp_browse_reject*
@@ -5957,16 +6037,21 @@ g:netrw_ftp_timelist_cmd	pi_netrw.txt	/*g:netrw_ftp_timelist_cmd*
 g:netrw_ftpextracmd	pi_netrw.txt	/*g:netrw_ftpextracmd*
 g:netrw_ftpmode	pi_netrw.txt	/*g:netrw_ftpmode*
 g:netrw_glob_escape	pi_netrw.txt	/*g:netrw_glob_escape*
+g:netrw_gx	pi_netrw.txt	/*g:netrw_gx*
 g:netrw_hide	pi_netrw.txt	/*g:netrw_hide*
 g:netrw_home	pi_netrw.txt	/*g:netrw_home*
 g:netrw_http_cmd	pi_netrw.txt	/*g:netrw_http_cmd*
+g:netrw_http_put_cmd	pi_netrw.txt	/*g:netrw_http_put_cmd*
 g:netrw_http_xcmd	pi_netrw.txt	/*g:netrw_http_xcmd*
 g:netrw_ignorenetrc	pi_netrw.txt	/*g:netrw_ignorenetrc*
 g:netrw_keepdir	pi_netrw.txt	/*g:netrw_keepdir*
+g:netrw_keepj	pi_netrw.txt	/*g:netrw_keepj*
 g:netrw_list_cmd	pi_netrw.txt	/*g:netrw_list_cmd*
+g:netrw_list_cmd_options	pi_netrw.txt	/*g:netrw_list_cmd_options*
 g:netrw_list_hide	pi_netrw.txt	/*g:netrw_list_hide*
 g:netrw_liststyle	pi_netrw.txt	/*g:netrw_liststyle*
 g:netrw_localcopycmd	pi_netrw.txt	/*g:netrw_localcopycmd*
+g:netrw_localcopydircmd	pi_netrw.txt	/*g:netrw_localcopydircmd*
 g:netrw_localmkdir	pi_netrw.txt	/*g:netrw_localmkdir*
 g:netrw_localmovecmd	pi_netrw.txt	/*g:netrw_localmovecmd*
 g:netrw_localrmdir	pi_netrw.txt	/*g:netrw_localrmdir*
@@ -5987,6 +6072,7 @@ g:netrw_rsync_cmd	pi_netrw.txt	/*g:netrw_rsync_cmd*
 g:netrw_scp_cmd	pi_netrw.txt	/*g:netrw_scp_cmd*
 g:netrw_scpport	pi_netrw.txt	/*g:netrw_scpport*
 g:netrw_sepchr	pi_netrw.txt	/*g:netrw_sepchr*
+g:netrw_servername	pi_netrw.txt	/*g:netrw_servername*
 g:netrw_sftp_cmd	pi_netrw.txt	/*g:netrw_sftp_cmd*
 g:netrw_silent	pi_netrw.txt	/*g:netrw_silent*
 g:netrw_sort_by	pi_netrw.txt	/*g:netrw_sort_by*
@@ -6026,6 +6112,8 @@ g:tex_isk	syntax.txt	/*g:tex_isk*
 g:tex_no_error	syntax.txt	/*g:tex_no_error*
 g:tex_nospell	syntax.txt	/*g:tex_nospell*
 g:tex_stylish	syntax.txt	/*g:tex_stylish*
+g:tex_subscripts	syntax.txt	/*g:tex_subscripts*
+g:tex_superscripts	syntax.txt	/*g:tex_superscripts*
 g:tex_verbspell	syntax.txt	/*g:tex_verbspell*
 g:var	eval.txt	/*g:var*
 g:vimball_home	pi_vimball.txt	/*g:vimball_home*
@@ -6035,6 +6123,7 @@ g:vimsyn_folding	syntax.txt	/*g:vimsyn_folding*
 g:vimsyn_maxlines	syntax.txt	/*g:vimsyn_maxlines*
 g:vimsyn_minlines	syntax.txt	/*g:vimsyn_minlines*
 g:vimsyn_noerror	syntax.txt	/*g:vimsyn_noerror*
+g:yaml_schema	syntax.txt	/*g:yaml_schema*
 g:zip_nomax	pi_zip.txt	/*g:zip_nomax*
 g:zip_shq	pi_zip.txt	/*g:zip_shq*
 g:zip_unzipcmd	pi_zip.txt	/*g:zip_unzipcmd*
@@ -6089,6 +6178,8 @@ getcharmod()	eval.txt	/*getcharmod()*
 getcmdline()	eval.txt	/*getcmdline()*
 getcmdpos()	eval.txt	/*getcmdpos()*
 getcmdtype()	eval.txt	/*getcmdtype()*
+getcmdwintype()	eval.txt	/*getcmdwintype()*
+getcurpos()	eval.txt	/*getcurpos()*
 getcwd()	eval.txt	/*getcwd()*
 getfontname()	eval.txt	/*getfontname()*
 getfperm()	eval.txt	/*getfperm()*
@@ -6123,6 +6214,7 @@ gi	insert.txt	/*gi*
 gj	motion.txt	/*gj*
 gk	motion.txt	/*gk*
 glob()	eval.txt	/*glob()*
+glob2regpat()	eval.txt	/*glob2regpat()*
 global-ime	mbyte.txt	/*global-ime*
 global-local	options.txt	/*global-local*
 global-variable	eval.txt	/*global-variable*
@@ -6360,6 +6452,7 @@ hl-WarningMsg	syntax.txt	/*hl-WarningMsg*
 hl-WildMenu	syntax.txt	/*hl-WildMenu*
 hlID()	eval.txt	/*hlID()*
 hlexists()	eval.txt	/*hlexists()*
+hlsearch-variable	eval.txt	/*hlsearch-variable*
 holy-grail	index.txt	/*holy-grail*
 home	intro.txt	/*home*
 home-replace	editing.txt	/*home-replace*
@@ -6648,6 +6741,7 @@ lcs-eol	options.txt	/*lcs-eol*
 lcs-extends	options.txt	/*lcs-extends*
 lcs-nbsp	options.txt	/*lcs-nbsp*
 lcs-precedes	options.txt	/*lcs-precedes*
+lcs-space	options.txt	/*lcs-space*
 lcs-tab	options.txt	/*lcs-tab*
 lcs-trail	options.txt	/*lcs-trail*
 left-right-motions	motion.txt	/*left-right-motions*
@@ -6671,6 +6765,7 @@ linewise-register	change.txt	/*linewise-register*
 linewise-visual	visual.txt	/*linewise-visual*
 lisp.vim	syntax.txt	/*lisp.vim*
 lispindent()	eval.txt	/*lispindent()*
+list	eval.txt	/*list*
 list-functions	usr_41.txt	/*list-functions*
 list-identity	eval.txt	/*list-identity*
 list-index	eval.txt	/*list-index*
@@ -6694,6 +6789,18 @@ location-list	quickfix.txt	/*location-list*
 location-list-window	quickfix.txt	/*location-list-window*
 log()	eval.txt	/*log()*
 log10()	eval.txt	/*log10()*
+logipat	pi_logipat.txt	/*logipat*
+logipat-arg	pi_logipat.txt	/*logipat-arg*
+logipat-caveat	pi_logipat.txt	/*logipat-caveat*
+logipat-contents	pi_logipat.txt	/*logipat-contents*
+logipat-copyright	pi_logipat.txt	/*logipat-copyright*
+logipat-examples	pi_logipat.txt	/*logipat-examples*
+logipat-history	pi_logipat.txt	/*logipat-history*
+logipat-input	pi_logipat.txt	/*logipat-input*
+logipat-man	pi_logipat.txt	/*logipat-man*
+logipat-manual	pi_logipat.txt	/*logipat-manual*
+logipat-operators	pi_logipat.txt	/*logipat-operators*
+logipat-pattern	pi_logipat.txt	/*logipat-pattern*
 long-lines	version5.txt	/*long-lines*
 love	intro.txt	/*love*
 lowercase	change.txt	/*lowercase*
@@ -6782,6 +6889,7 @@ match()	eval.txt	/*match()*
 match-highlight	pattern.txt	/*match-highlight*
 match-parens	tips.txt	/*match-parens*
 matchadd()	eval.txt	/*matchadd()*
+matchaddpos()	eval.txt	/*matchaddpos()*
 matcharg()	eval.txt	/*matcharg()*
 matchdelete()	eval.txt	/*matchdelete()*
 matchend()	eval.txt	/*matchend()*
@@ -6923,10 +7031,22 @@ netreadfixup	pi_netrw.txt	/*netreadfixup*
 netrw	pi_netrw.txt	/*netrw*
 netrw-%	pi_netrw.txt	/*netrw-%*
 netrw--	pi_netrw.txt	/*netrw--*
+netrw-:Explore	pi_netrw.txt	/*netrw-:Explore*
+netrw-:Hexplore	pi_netrw.txt	/*netrw-:Hexplore*
+netrw-:Lexplore	pi_netrw.txt	/*netrw-:Lexplore*
+netrw-:MF	pi_netrw.txt	/*netrw-:MF*
+netrw-:MT	pi_netrw.txt	/*netrw-:MT*
+netrw-:NetrwC	pi_netrw.txt	/*netrw-:NetrwC*
+netrw-:NetrwMB	pi_netrw.txt	/*netrw-:NetrwMB*
+netrw-:Rexplore	pi_netrw.txt	/*netrw-:Rexplore*
+netrw-:Sexplore	pi_netrw.txt	/*netrw-:Sexplore*
+netrw-:Texplore	pi_netrw.txt	/*netrw-:Texplore*
+netrw-:Vexplore	pi_netrw.txt	/*netrw-:Vexplore*
 netrw-C	pi_netrw.txt	/*netrw-C*
 netrw-D	pi_netrw.txt	/*netrw-D*
 netrw-O	pi_netrw.txt	/*netrw-O*
 netrw-P	pi_netrw.txt	/*netrw-P*
+netrw-P18	pi_netrw.txt	/*netrw-P18*
 netrw-R	pi_netrw.txt	/*netrw-R*
 netrw-S	pi_netrw.txt	/*netrw-S*
 netrw-Tb	pi_netrw.txt	/*netrw-Tb*
@@ -6956,6 +7076,7 @@ netrw-createfile	pi_netrw.txt	/*netrw-createfile*
 netrw-credits	pi_netrw.txt	/*netrw-credits*
 netrw-ctrl-h	pi_netrw.txt	/*netrw-ctrl-h*
 netrw-ctrl-l	pi_netrw.txt	/*netrw-ctrl-l*
+netrw-ctrl-r	pi_netrw.txt	/*netrw-ctrl-r*
 netrw-ctrl_l	pi_netrw.txt	/*netrw-ctrl_l*
 netrw-curdir	pi_netrw.txt	/*netrw-curdir*
 netrw-d	pi_netrw.txt	/*netrw-d*
@@ -6980,7 +7101,9 @@ netrw-gd	pi_netrw.txt	/*netrw-gd*
 netrw-getftype	pi_netrw.txt	/*netrw-getftype*
 netrw-gf	pi_netrw.txt	/*netrw-gf*
 netrw-gh	pi_netrw.txt	/*netrw-gh*
+netrw-gitignore	pi_netrw.txt	/*netrw-gitignore*
 netrw-gp	pi_netrw.txt	/*netrw-gp*
+netrw-grep	pi_netrw.txt	/*netrw-grep*
 netrw-gx	pi_netrw.txt	/*netrw-gx*
 netrw-handler	pi_netrw.txt	/*netrw-handler*
 netrw-help	pi_netrw.txt	/*netrw-help*
@@ -6994,6 +7117,7 @@ netrw-incompatible	pi_netrw.txt	/*netrw-incompatible*
 netrw-internal-variables	pi_netrw.txt	/*netrw-internal-variables*
 netrw-intro-browse	pi_netrw.txt	/*netrw-intro-browse*
 netrw-leftmouse	pi_netrw.txt	/*netrw-leftmouse*
+netrw-lexplore	pi_netrw.txt	/*netrw-lexplore*
 netrw-list	pi_netrw.txt	/*netrw-list*
 netrw-listbookmark	pi_netrw.txt	/*netrw-listbookmark*
 netrw-listhack	pi_netrw.txt	/*netrw-listhack*
@@ -7001,6 +7125,7 @@ netrw-login	pi_netrw.txt	/*netrw-login*
 netrw-mB	pi_netrw.txt	/*netrw-mB*
 netrw-mF	pi_netrw.txt	/*netrw-mF*
 netrw-mT	pi_netrw.txt	/*netrw-mT*
+netrw-mX	pi_netrw.txt	/*netrw-mX*
 netrw-mb	pi_netrw.txt	/*netrw-mb*
 netrw-mc	pi_netrw.txt	/*netrw-mc*
 netrw-md	pi_netrw.txt	/*netrw-md*
@@ -7018,12 +7143,14 @@ netrw-mr	pi_netrw.txt	/*netrw-mr*
 netrw-ms	pi_netrw.txt	/*netrw-ms*
 netrw-mt	pi_netrw.txt	/*netrw-mt*
 netrw-mu	pi_netrw.txt	/*netrw-mu*
+netrw-mv	pi_netrw.txt	/*netrw-mv*
 netrw-mx	pi_netrw.txt	/*netrw-mx*
 netrw-mz	pi_netrw.txt	/*netrw-mz*
 netrw-netrc	pi_netrw.txt	/*netrw-netrc*
 netrw-nexplore	pi_netrw.txt	/*netrw-nexplore*
 netrw-noload	pi_netrw.txt	/*netrw-noload*
 netrw-nread	pi_netrw.txt	/*netrw-nread*
+netrw-ntree	pi_netrw.txt	/*netrw-ntree*
 netrw-nwrite	pi_netrw.txt	/*netrw-nwrite*
 netrw-o	pi_netrw.txt	/*netrw-o*
 netrw-options	pi_netrw.txt	/*netrw-options*
@@ -7035,6 +7162,8 @@ netrw-p12	pi_netrw.txt	/*netrw-p12*
 netrw-p13	pi_netrw.txt	/*netrw-p13*
 netrw-p14	pi_netrw.txt	/*netrw-p14*
 netrw-p15	pi_netrw.txt	/*netrw-p15*
+netrw-p16	pi_netrw.txt	/*netrw-p16*
+netrw-p17	pi_netrw.txt	/*netrw-p17*
 netrw-p2	pi_netrw.txt	/*netrw-p2*
 netrw-p3	pi_netrw.txt	/*netrw-p3*
 netrw-p4	pi_netrw.txt	/*netrw-p4*
@@ -7315,6 +7444,7 @@ php3.vim	syntax.txt	/*php3.vim*
 phtml.vim	syntax.txt	/*phtml.vim*
 pi_getscript.txt	pi_getscript.txt	/*pi_getscript.txt*
 pi_gzip.txt	pi_gzip.txt	/*pi_gzip.txt*
+pi_logipat.txt	pi_logipat.txt	/*pi_logipat.txt*
 pi_netrw.txt	pi_netrw.txt	/*pi_netrw.txt*
 pi_paren.txt	pi_paren.txt	/*pi_paren.txt*
 pi_spec.txt	pi_spec.txt	/*pi_spec.txt*
@@ -7361,6 +7491,7 @@ printf()	eval.txt	/*printf()*
 printf-%	eval.txt	/*printf-%*
 printf-E	eval.txt	/*printf-E*
 printf-G	eval.txt	/*printf-G*
+printf-S	eval.txt	/*printf-S*
 printf-X	eval.txt	/*printf-X*
 printf-c	eval.txt	/*printf-c*
 printf-d	eval.txt	/*printf-d*
@@ -7376,6 +7507,7 @@ profile	repeat.txt	/*profile*
 profiling	repeat.txt	/*profiling*
 profiling-variable	eval.txt	/*profiling-variable*
 progname-variable	eval.txt	/*progname-variable*
+progpath-variable	eval.txt	/*progpath-variable*
 progress.vim	syntax.txt	/*progress.vim*
 pronounce	intro.txt	/*pronounce*
 psql	ft_sql.txt	/*psql*
@@ -7579,6 +7711,7 @@ s/\2	change.txt	/*s\/\\2*
 s/\3	change.txt	/*s\/\\3*
 s/\9	change.txt	/*s\/\\9*
 s/\<CR>	change.txt	/*s\/\\<CR>*
+s/\=	change.txt	/*s\/\\=*
 s/\E	change.txt	/*s\/\\E*
 s/\L	change.txt	/*s\/\\L*
 s/\U	change.txt	/*s\/\\U*
@@ -7748,6 +7881,7 @@ spell-FLAG	spell.txt	/*spell-FLAG*
 spell-FOL	spell.txt	/*spell-FOL*
 spell-FORBIDDENWORD	spell.txt	/*spell-FORBIDDENWORD*
 spell-HOME	spell.txt	/*spell-HOME*
+spell-IGNOREEXTRA	spell.txt	/*spell-IGNOREEXTRA*
 spell-KEEPCASE	spell.txt	/*spell-KEEPCASE*
 spell-KEY	spell.txt	/*spell-KEY*
 spell-LANG	spell.txt	/*spell-LANG*
@@ -7789,6 +7923,7 @@ spell-affix-flags	spell.txt	/*spell-affix-flags*
 spell-affix-mbyte	spell.txt	/*spell-affix-mbyte*
 spell-affix-not-supported	spell.txt	/*spell-affix-not-supported*
 spell-affix-vim	spell.txt	/*spell-affix-vim*
+spell-cjk	spell.txt	/*spell-cjk*
 spell-compound	spell.txt	/*spell-compound*
 spell-dic-format	spell.txt	/*spell-dic-format*
 spell-double-scoring	spell.txt	/*spell-double-scoring*
@@ -7874,6 +8009,7 @@ strcspn()	eval.txt	/*strcspn()*
 strdisplaywidth()	eval.txt	/*strdisplaywidth()*
 strftime()	eval.txt	/*strftime()*
 stridx()	eval.txt	/*stridx()*
+string	eval.txt	/*string*
 string()	eval.txt	/*string()*
 string-functions	usr_41.txt	/*string-functions*
 string-match	eval.txt	/*string-match*
@@ -7938,6 +8074,7 @@ sysmouse	term.txt	/*sysmouse*
 system()	eval.txt	/*system()*
 system-functions	usr_41.txt	/*system-functions*
 system-vimrc	starting.txt	/*system-vimrc*
+systemlist()	eval.txt	/*systemlist()*
 s~	change.txt	/*s~*
 t	motion.txt	/*t*
 t:	eval.txt	/*t:*
@@ -7989,9 +8126,11 @@ t_KI	term.txt	/*t_KI*
 t_KJ	term.txt	/*t_KJ*
 t_KK	term.txt	/*t_KK*
 t_KL	term.txt	/*t_KL*
+t_RB	term.txt	/*t_RB*
 t_RI	term.txt	/*t_RI*
 t_RV	term.txt	/*t_RV*
 t_SI	term.txt	/*t_SI*
+t_SR	term.txt	/*t_SR*
 t_Sb	term.txt	/*t_Sb*
 t_Sf	term.txt	/*t_Sf*
 t_WP	term.txt	/*t_WP*
@@ -8094,6 +8233,7 @@ t_vb	term.txt	/*t_vb*
 t_ve	term.txt	/*t_ve*
 t_vi	term.txt	/*t_vi*
 t_vs	term.txt	/*t_vs*
+t_xn	term.txt	/*t_xn*
 t_xs	term.txt	/*t_xs*
 tab	intro.txt	/*tab*
 tab-page	tabpage.txt	/*tab-page*
@@ -8222,6 +8362,7 @@ tex-runon	syntax.txt	/*tex-runon*
 tex-slow	syntax.txt	/*tex-slow*
 tex-stopzone	syntax.txt	/*tex-stopzone*
 tex-style	syntax.txt	/*tex-style*
+tex-supersub	syntax.txt	/*tex-supersub*
 tex-sync	syntax.txt	/*tex-sync*
 tex-verb	syntax.txt	/*tex-verb*
 tex.vim	syntax.txt	/*tex.vim*
@@ -8282,6 +8423,7 @@ undo_ftplugin	usr_41.txt	/*undo_ftplugin*
 undofile()	eval.txt	/*undofile()*
 undotree()	eval.txt	/*undotree()*
 unicode	mbyte.txt	/*unicode*
+uniq()	eval.txt	/*uniq()*
 unix	os_unix.txt	/*unix*
 unlisted-buffer	windows.txt	/*unlisted-buffer*
 up-down-motions	motion.txt	/*up-down-motions*
@@ -8366,6 +8508,7 @@ v:folddashes	eval.txt	/*v:folddashes*
 v:foldend	eval.txt	/*v:foldend*
 v:foldlevel	eval.txt	/*v:foldlevel*
 v:foldstart	eval.txt	/*v:foldstart*
+v:hlsearch	eval.txt	/*v:hlsearch*
 v:insertmode	eval.txt	/*v:insertmode*
 v:key	eval.txt	/*v:key*
 v:lang	eval.txt	/*v:lang*
@@ -8379,6 +8522,7 @@ v:operator	eval.txt	/*v:operator*
 v:prevcount	eval.txt	/*v:prevcount*
 v:profiling	eval.txt	/*v:profiling*
 v:progname	eval.txt	/*v:progname*
+v:progpath	eval.txt	/*v:progpath*
 v:register	eval.txt	/*v:register*
 v:scrollstart	eval.txt	/*v:scrollstart*
 v:searchforward	eval.txt	/*v:searchforward*
@@ -8406,11 +8550,13 @@ v_<Esc>	visual.txt	/*v_<Esc>*
 v_=	change.txt	/*v_=*
 v_>	change.txt	/*v_>*
 v_C	change.txt	/*v_C*
+v_CTRL-A	change.txt	/*v_CTRL-A*
 v_CTRL-C	visual.txt	/*v_CTRL-C*
 v_CTRL-G	visual.txt	/*v_CTRL-G*
 v_CTRL-H	change.txt	/*v_CTRL-H*
 v_CTRL-O	visual.txt	/*v_CTRL-O*
 v_CTRL-V	visual.txt	/*v_CTRL-V*
+v_CTRL-X	change.txt	/*v_CTRL-X*
 v_CTRL-Z	starting.txt	/*v_CTRL-Z*
 v_CTRL-\_CTRL-G	intro.txt	/*v_CTRL-\\_CTRL-G*
 v_CTRL-\_CTRL-N	intro.txt	/*v_CTRL-\\_CTRL-N*
@@ -8466,7 +8612,9 @@ v_gJ	change.txt	/*v_gJ*
 v_gN	visual.txt	/*v_gN*
 v_gV	visual.txt	/*v_gV*
 v_g]	tagsrch.txt	/*v_g]*
+v_g_CTRL-A	change.txt	/*v_g_CTRL-A*
 v_g_CTRL-G	editing.txt	/*v_g_CTRL-G*
+v_g_CTRL-X	change.txt	/*v_g_CTRL-X*
 v_g_CTRL-]	tagsrch.txt	/*v_g_CTRL-]*
 v_gf	editing.txt	/*v_gf*
 v_gn	visual.txt	/*v_gn*
@@ -8694,6 +8842,7 @@ window-variable	eval.txt	/*window-variable*
 windowid-variable	eval.txt	/*windowid-variable*
 windows	windows.txt	/*windows*
 windows-3.1	os_win32.txt	/*windows-3.1*
+windows-icon	os_win32.txt	/*windows-icon*
 windows-intro	windows.txt	/*windows-intro*
 windows-starting	windows.txt	/*windows-starting*
 windows.txt	windows.txt	/*windows.txt*
@@ -8770,6 +8919,7 @@ xterm-screens	tips.txt	/*xterm-screens*
 xterm-scroll-region	term.txt	/*xterm-scroll-region*
 xterm-shifted-keys	term.txt	/*xterm-shifted-keys*
 y	change.txt	/*y*
+yaml.vim	syntax.txt	/*yaml.vim*
 yank	change.txt	/*yank*
 ye-option-gone	version4.txt	/*ye-option-gone*
 year-2000	intro.txt	/*year-2000*

runtime/doc/term.txt

@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 7.4.  Last change: 2013 Mar 13
+*term.txt*      For Vim version 7.4.  Last change: 2015 Jun 25
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -224,10 +224,11 @@ The options are listed below.  The associated termcap code is always equal to
 the last two characters of the option name.  Only one termcap code is
 required: Cursor motion, 't_cm'.
 
-The options 't_da', 't_db', 't_ms', 't_xs' represent flags in the termcap.
-When the termcap flag is present, the option will be set to "y".  But any
-non-empty string means that the flag is set.  An empty string means that the
-flag is not set.  't_CS' works like this too, but it isn't a termcap flag.
+The options 't_da', 't_db', 't_ms', 't_xs', 't_xn' represent flags in the
+termcap.  When the termcap flag is present, the option will be set to "y".
+But any non-empty string means that the flag is set.  An empty string means
+that the flag is not set.  't_CS' works like this too, but it isn't a termcap
+flag.
 
 OUTPUT CODES
 	option	meaning	~
@@ -281,6 +282,9 @@ OUTPUT CODES
 	t_vs	cursor very visible				*t_vs* *'t_vs'*
 								*t_xs* *'t_xs'*
 	t_xs	if non-empty, standout not erased by overwriting (hpterm)
+								*t_xn* *'t_xn'*
+	t_xn	if non-empty, writing a character at the last screen cell
+		does not cause scrolling
 	t_ZH	italics mode					*t_ZH* *'t_ZH'*
 	t_ZR	italics end					*t_ZR* *'t_ZR'*
 
@@ -290,12 +294,15 @@ Added by Vim (there are no standard codes for these):
 	t_WP	set window position (Y, X) in pixels		*t_WP* *'t_WP'*
 	t_WS	set window size (height, width) in characters	*t_WS* *'t_WS'*
 	t_SI	start insert mode (bar cursor shape)		*t_SI* *'t_SI'*
-	t_EI	end insert mode (block cursor shape)		*t_EI* *'t_EI'*
+	t_SR	start replace mode (underline cursor shape)	*t_SR* *'t_SR'*
+	t_EI	end insert or replace mode (block cursor shape)	*t_EI* *'t_EI'*
 		|termcap-cursor-shape|
 	t_RV	request terminal version string (for xterm)	*t_RV* *'t_RV'*
 		|xterm-8bit| |v:termresponse| |'ttymouse'| |xterm-codes|
 	t_u7	request cursor position (for xterm)		*t_u7* *'t_u7'*
 		see |'ambiwidth'|
+	t_RB	request terminal background color		*t_RB* *'t_RB'*
+		see |'ambiwidth'|
 
 KEY CODES
 Note: Use the <> form if possible
@@ -410,7 +417,7 @@ adjust the various t_ codes.  This avoids the problem that the xterm can
 produce different codes, depending on the mode it is in (8-bit, VT102,
 VT220, etc.).  The result is that codes like <xF1> are no longer needed.
 Note: This is only done on startup.  If the xterm options are changed after
-Vim has started, the escape sequences may not be recognized any more.
+Vim has started, the escape sequences may not be recognized anymore.
 
 							*xterm-resize*
 Window resizing with xterm only works if the allowWindowOps resource is
@@ -434,13 +441,16 @@ If one of these is not available, 't_Sb' and 't_Sf' are used.  't_me' is used
 to reset to the default colors.
 
 				*termcap-cursor-shape* *termcap-cursor-color*
-When Vim enters Insert mode the 't_SI' escape sequence is sent.  When leaving
-Insert mode 't_EI' is used.  But only if both are defined.  This can be used
-to change the shape or color of the cursor in Insert mode.  These are not
-standard termcap/terminfo entries, you need to set them yourself.
+When Vim enters Insert mode the 't_SI' escape sequence is sent.  When Vim
+enters Replace mode the 't_SR' escape sequence is sent if it is set, otherwise
+'t_SI' is sent.  When leaving Insert mode or Replace mode 't_EI' is used. This
+can be used to change the shape or color of the cursor in Insert or Replace
+mode. These are not standard termcap/terminfo entries, you need to set them
+yourself.
 Example for an xterm, this changes the color of the cursor: >
     if &term =~ "xterm"
 	let &t_SI = "\<Esc>]12;purple\x7"
+	let &t_SR = "\<Esc>]12;red\x7"
 	let &t_EI = "\<Esc>]12;blue\x7"
     endif
 NOTE: When Vim exits the shape for Normal mode will remain.  The shape from
@@ -666,8 +676,8 @@ When the X-server clipboard is available, the command server described in
 
 							*xterm-copy-paste*
 NOTE: In some (older) xterms, it's not possible to move the cursor past column
-95.  This is an xterm problem, not Vim's.  Get a newer xterm |color-xterm|.
-Now the limit is 223 columns.
+95 or 223.  This is an xterm problem, not Vim's.  Get a newer xterm
+|color-xterm|.  Also see |'ttymouse'|.
 
 Copy/paste in xterm with (current mode NOT included in 'mouse'):
 1. Press left mouse button on first letter of text, move mouse pointer to last

runtime/doc/uganda.txt

@@ -194,7 +194,7 @@ child, you should have the intention to do this for at least one year.
 
 How do you know that the money will be spent right?  First of all you have my
 personal guarantee as the author of Vim.  I trust the people that are working
-at the centre, I know them personally.  Further more, the centre has been
+at the centre, I know them personally.  Furthermore, the centre has been
 co-sponsored and inspected by World Vision, Save the Children Fund and is now
 under the supervision of Pacific Academy Outreach Society.  The centre is
 visited about once a year to check the progress (at our own cost).  I have

runtime/doc/undo.txt

@@ -1,4 +1,4 @@
-*undo.txt*      For Vim version 7.4.  Last change: 2013 Sep 08
+*undo.txt*      For Vim version 7.4.  Last change: 2014 May 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -97,9 +97,9 @@ change but joins in with the previous change use this command:
 			or redo.
 			{not in Vi}
 
-This is most useful when you need to prompt the user halfway a change.  For
-example in a function that calls |getchar()|.  Do make sure that there was a
-related change before this that you must join with.
+This is most useful when you need to prompt the user halfway through a change.
+For example in a function that calls |getchar()|.  Do make sure that there was
+a related change before this that you must join with.
 
 This doesn't work by itself, because the next key press will start a new
 change again.  But you can do something like this: >

runtime/doc/usr_02.txt

@@ -1,4 +1,4 @@
-*usr_02.txt*	For Vim version 7.4.  Last change: 2010 Jul 20
+*usr_02.txt*	For Vim version 7.4.  Last change: 2015 Apr 12
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -527,9 +527,11 @@ Summary: 					*help-summary*  >
 	:help subject()
 <		Function "subject". >
 	:help -subject
-<		Command-line option "-subject". >
+<		Command-line argument "-subject". >
 	:help +subject
 <		Compile-time feature "+subject". >
+	:help /*
+<		Regular expression item "*" >
 	:help EventName
 <		Autocommand event "EventName". >
 	:help digraphs.txt

runtime/doc/usr_03.txt

@@ -532,7 +532,7 @@ MATCHING ANY SINGLE CHARACTER
 
 The . (dot) character matches any existing character.  For example, the
 pattern "c.m" matches a string whose first character is a c, whose second
-character is anything, and whose the third character is m.  Example:
+character is anything, and whose third character is m.  Example:
 
 	We use a computer that became the cummin winter. ~
 		 xxx		 xxx	  xxx

runtime/doc/usr_04.txt

@@ -1,4 +1,4 @@
-*usr_04.txt*	For Vim version 7.4.  Last change: 2008 Sep 06
+*usr_04.txt*	For Vim version 7.4.  Last change: 2014 Aug 29
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -186,7 +186,7 @@ commands:
 	/four<Enter>	find the first string "four"
 	cwfive<Esc>	change the word to "five"
 	n		find the next "four"
-	.		repeat the change to "five'
+	.		repeat the change to "five"
 	n		find the next "four"
 	.		repeat the change
 			etc.

runtime/doc/usr_08.txt

@@ -1,4 +1,4 @@
-*usr_08.txt*	For Vim version 7.4.  Last change: 2006 Jul 18
+*usr_08.txt*	For Vim version 7.4.  Last change: 2014 Jul 06
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -532,7 +532,7 @@ window.  And you will notice a bar at the top with the two file names:
 
 You now have two tab pages.  The first one has a window for "thisfile" and the
 second one a window for "thatfile".  It's like two pages that are on top of
-eachother, with a tab sticking out of each page showing the file name.
+each other, with a tab sticking out of each page showing the file name.
 
 Now use the mouse to click on "thisfile" in the top line.  The result is
 

runtime/doc/usr_25.txt

@@ -1,4 +1,4 @@
-*usr_25.txt*	For Vim version 7.4.  Last change: 2007 May 11
+*usr_25.txt*	For Vim version 7.4.  Last change: 2014 Oct 29
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -402,7 +402,7 @@ the cursor keys: >
 	:map <Down> gj
 
 
-TURNING A PARAGRAPH INTO ONE LINE
+TURNING A PARAGRAPH INTO ONE LINE			*edit-paragraph-join*
 
 If you want to import text into a program like MS-Word, each paragraph should
 be a single line.  If your paragraphs are currently separated with empty

runtime/doc/usr_30.txt

@@ -128,7 +128,7 @@ be escaped with a backslash.  Example: >
 You can include special Vim keywords in the command specification.  The %
 character expands to the name of the current file.  So if you execute the
 command: >
-	:set makeprg=make\ %
+	:set makeprg=make\ %:S
 
 When you are editing main.c, then ":make" executes the following command: >
 
@@ -137,7 +137,7 @@ When you are editing main.c, then ":make" executes the following command: >
 This is not too useful, so you will refine the command a little and use the :r
 (root) modifier: >
 
-	:set makeprg=make\ %:r.o
+	:set makeprg=make\ %:r:S.o
 
 Now the command executed is as follows: >
 

runtime/doc/usr_40.txt

@@ -209,7 +209,7 @@ The ":map" command can be followed by another command.  A | character
 separates the two commands.  This also means that a | character can't be used
 inside a map command.  To include one, use <Bar> (five characters).  Example:
 >
-	:map <F8> :write <Bar> !checkin %<CR>
+	:map <F8> :write <Bar> !checkin %:S<CR>
 
 The same problem applies to the ":unmap" command, with the addition that you
 have to watch out for trailing white space.  These two commands are different:

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 7.4.  Last change: 2013 Feb 20
+*usr_41.txt*	For Vim version 7.4.  Last change: 2014 Aug 16
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -595,13 +595,17 @@ String manipulation:					*string-functions*
 	matchlist()		like matchstr() and also return submatches
 	stridx()		first index of a short string in a long string
 	strridx()		last index of a short string in a long string
-	strlen()		length of a string
+	strlen()		length of a string in bytes
+	strchars()		length of a string in characters
+	strwidth()		size of string when displayed
+	strdisplaywidth()	size of string when displayed, deals with tabs
 	substitute()		substitute a pattern match with a string
 	submatch()		get a specific match in ":s" and substitute()
 	strpart()		get part of a string
 	expand()		expand special keywords
 	iconv()			convert text from one encoding to another
 	byteidx()		byte index of a character in a string
+	byteidxcomp()		like byteidx() but count composing characters
 	repeat()		repeat a string multiple times
 	eval()			evaluate a string expression
 
@@ -619,6 +623,7 @@ List manipulation:					*list-functions*
 	map()			change each List item
 	sort()			sort a List
 	reverse()		reverse the order of a List
+	uniq()			remove copies of repeated adjacent items
 	split()			split a String into a List
 	join()			join List items into a String
 	range()			return a List with a sequence of numbers
@@ -656,6 +661,9 @@ Floating point computation:				*float-functions*
 	ceil()			round up
 	floor()			round down
 	trunc()			remove value after decimal point
+	fmod()			remainder of division
+	exp()			exponential
+	log()			natural logarithm (logarithm to base e)
 	log10()			logarithm to base 10
 	pow()			value of x to the exponent y
 	sqrt()			square root
@@ -675,6 +683,7 @@ Other computation:					*bitwise-function*
 	invert()		bitwise invert
 	or()			bitwise OR
 	xor()			bitwise XOR
+	sha256()		SHA-256 hash
 
 Variables:						*var-functions*
 	type()			type of a variable
@@ -697,11 +706,16 @@ Cursor and mark position:		*cursor-functions* *mark-functions*
 	wincol()		window column number of the cursor
 	winline()		window line number of the cursor
 	cursor()		position the cursor at a line/column
+	screencol()		get screen column of the cursor
+	screenrow()		get screen row of the cursor
+	getcurpos()		get position of the cursor
 	getpos()		get position of cursor, mark, etc.
 	setpos()		set position of cursor, mark, etc.
 	byte2line()		get line number at a specific byte count
 	line2byte()		byte count at a specific line
 	diff_filler()		get the number of filler lines above a line
+	screenattr()		get attribute at a screen line/row
+	screenchar()		get character code at a screen line/row
 
 Working with text in the current buffer:		*text-functions*
 	getline()		get a line or list of lines from the buffer
@@ -729,6 +743,7 @@ System functions and manipulation of files:
 	pathshorten()		shorten directory names in a path
 	simplify()		simplify a path without changing its meaning
 	executable()		check if an executable program exists
+	exepath()		full path of an executable program
 	filereadable()		check if a file can be read
 	filewritable()		check if a file can be written to
 	getfperm()		get the permissions of a file
@@ -741,7 +756,8 @@ System functions and manipulation of files:
 	mkdir()			create a new directory
 	delete()		delete a file
 	rename()		rename a file
-	system()		get the result of a shell command
+	system()		get the result of a shell command as a string
+	systemlist()		get the result of a shell command as a list
 	hostname()		name of the system
 	readfile()		read a file into a List of lines
 	writefile()		write a List of lines into a file
@@ -757,6 +773,7 @@ Date and Time:				*date-functions* *time-functions*
 Buffers, windows and the argument list:
 	argc()			number of entries in the argument list
 	argidx()		current position in the argument list
+	arglistid()		get id of the argument list
 	argv()			get one entry from the argument list
 	bufexists()		check if a buffer exists
 	buflisted()		check if a buffer exists and is listed
@@ -776,6 +793,7 @@ Command line:					*command-line-functions*
 	getcmdpos()		get position of the cursor in the command line
 	setcmdpos()		set position of the cursor in the command line
 	getcmdtype()		return the current command-line type
+	getcmdwintype()		return the current command-line window type
 
 Quickfix and location lists:			*quickfix-functions*
 	getqflist()		list of quickfix errors
@@ -810,6 +828,7 @@ Syntax and highlighting:	  *syntax-functions* *highlighting-functions*
 	synconcealed()		get info about concealing
 	diff_hlID()		get highlight ID for diff mode at a position
 	matchadd()		define a pattern to highlight (a "match")
+	matchaddpos()		define a list of positions to highlight
 	matcharg()		get info about |:match| arguments
 	matchdelete()		delete a match defined by |matchadd()| or a
 				|:match| command
@@ -883,14 +902,22 @@ Various:					*various-functions*
 	libcall()		call a function in an external library
 	libcallnr()		idem, returning a number
 
+	undofile()		get the name of the undo file
+	undotree()		return the state of the undo tree
+
 	getreg()		get contents of a register
 	getregtype()		get type of a register
 	setreg()		set contents and type of a register
 
+	shiftwidth()		effective value of 'shiftwidth'
+
 	taglist()		get list of matching tags
 	tagfiles()		get a list of tags files
 
+	luaeval()		evaluate Lua expression
 	mzeval()		evaluate |MzScheme| expression
+	py3eval()		evaluate Python expression (|+python3|)
+	pyeval()		evaluate Python expression (|+python|)
 
 ==============================================================================
 *41.7*	Defining a function

runtime/doc/usr_42.txt

@@ -311,7 +311,7 @@ redefine what these items do (after the default menus are setup).
 item with a bitmap.  For example, define a new toolbar item with: >
 
 	:tmenu ToolBar.Compile  Compile the current file
-	:amenu ToolBar.Compile  :!cc % -o %:r<CR>
+	:amenu ToolBar.Compile  :!cc %:S -o %:r:S<CR>
 
 Now you need to create the icon.  For MS-Windows it must be in bitmap format,
 with the name "Compile.bmp".  For Unix XPM format is used, the file name is

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 7.4.  Last change: 2013 May 18
+*various.txt*   For Vim version 7.4.  Last change: 2014 Aug 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -234,25 +234,41 @@ g8			Print the hex values of the bytes used in the
 							*:!cmd* *:!* *E34*
 :!{cmd}			Execute {cmd} with the shell.  See also the 'shell'
 			and 'shelltype' option.
+
 			Any '!' in {cmd} is replaced with the previous
 			external command (see also 'cpoptions').  But not when
 			there is a backslash before the '!', then that
 			backslash is removed.  Example: ":!ls" followed by
 			":!echo ! \! \\!" executes "echo ls ! \!".
-			After the command has been executed, the timestamp of
-			the current file is checked |timestamp|.
+
 			A '|' in {cmd} is passed to the shell, you cannot use
 			it to append a Vim command.  See |:bar|.
+
+			If {cmd} contains "%" it is expanded to the current
+			file name.  Special characters are not escaped, use
+			quotes to avoid their special meaning: >
+				:!ls "%"
+<			If the file name contains a "$" single quotes might
+			work better (but a single quote causes trouble): >
+				:!ls '%'
+<			This should always work, but it's more typing: >
+				:exe "!ls " . shellescape(expand("%"))
+<
 			A newline character ends {cmd}, what follows is
 			interpreted as a following ":" command.  However, if
 			there is a backslash before the newline it is removed
 			and {cmd} continues.  It doesn't matter how many
 			backslashes are before the newline, only one is
 			removed.
+
 			On Unix the command normally runs in a non-interactive
 			shell.  If you want an interactive shell to be used
 			(to use aliases) set 'shellcmdflag' to "-ic".
 			For Win32 also see |:!start|.
+
+			After the command has been executed, the timestamp and
+			size of the current file is checked |timestamp|.
+
 			Vim redraws the screen after the command is finished,
 			because it may have printed any text.  This requires a
 			hit-enter prompt, so that you can read any messages.
@@ -321,6 +337,7 @@ N  *+dialog_con*	Support for |:confirm| with console dialog.
 N  *+dialog_con_gui*	Support for |:confirm| with GUI and console dialog.
 N  *+diff*		|vimdiff| and 'diff'
 N  *+digraphs*		|digraphs| *E196*
+m  *+directx*		Win32 GUI only: DirectX and |'renderoptions'|
    *+dnd*		Support for DnD into the "~ register |quote_~|.
 B  *+emacs_tags*	|emacs-tags| files
 N  *+eval*		expression evaluation |eval.txt|
@@ -363,6 +380,7 @@ N  *+mouse*		Mouse handling |mouse-using|
 N  *+mouseshape*	|'mouseshape'|
 B  *+mouse_dec*		Unix only: Dec terminal mouse handling |dec-mouse|
 N  *+mouse_gpm*		Unix only: Linux console mouse handling |gpm-mouse|
+N  *+mouse_jsbterm*	JSB mouse handling |jsbterm-mouse|
 B  *+mouse_netterm*	Unix only: netterm mouse handling |netterm-mouse|
 N  *+mouse_pterm*	QNX only: pterm mouse handling |qnx-terminal|
 N  *+mouse_sysmouse*	Unix only: *BSD console mouse handling |sysmouse|
@@ -418,7 +436,7 @@ N  *+user_commands*	User-defined commands. |user-commands|
 N  *+viminfo*		|'viminfo'|
 N  *+vertsplit*		Vertically split windows |:vsplit|
 N  *+virtualedit*	|'virtualedit'|
-S  *+visual*		Visual mode |Visual-mode|
+S  *+visual*		Visual mode |Visual-mode| Always enabled since 7.4.200.
 N  *+visualextra*	extra Visual mode commands |blockwise-operators|
 N  *+vreplace*		|gR| and |gr|
 N  *+wildignore*	|'wildignore'|

runtime/doc/version6.txt

@@ -1,4 +1,4 @@
-*version6.txt*  For Vim version 7.4.  Last change: 2013 Jul 28
+*version6.txt*  For Vim version 7.4.  Last change: 2014 Aug 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -7816,7 +7816,7 @@ Files:	    src/buffer.c, src/eval.c, src/ex_docmd.c, src/fileio.c,
 Patch 6.1.212
 Problem:    When Vim was started with "-R" ":new" creates a buffer
 	    'noreadonly' while ":enew" has 'readonly' set. (Preben Guldberg)
-Solution:   Don't set 'readonly in a new empty buffer for ":enew".
+Solution:   Don't set 'readonly' in a new empty buffer for ":enew".
 Files:	    src/ex_docmd.c
 
 Patch 6.1.213

runtime/doc/version7.txt

@@ -1,4 +1,4 @@
-*version7.txt*  For Vim version 7.4.  Last change: 2013 Sep 03
+*version7.txt*  For Vim version 7.4.  Last change: 2014 Aug 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -942,6 +942,7 @@ New and extended functions: ~
 |tagfiles()|		List with tags file names
 |taglist()|		get list of matching tags (Yegappan Lakshmanan)
 |tr()|			translate characters (Ron Aaron)
+|uniq()|		remove copies of repeated adjacent list items
 |values()|		get List of Dictionary values
 |winnr()|		takes an argument: what window to use
 |winrestview()|		restore the view of the current window
@@ -1625,10 +1626,10 @@ and merge it back in.
 When running the tests and one of them fails to produce "test.out" the
 following tests are still executed.  This helps when running out of memory.
 
-When compiling with EXITFREE defined and the ccmalloc library it is possible
-to detect memory leaks.  Some memory will always reported as leaked, such as
-allocated by X11 library functions and the memory allocated in alloc_cmdbuff()
-to store the ":quit" command.
+When compiling with EXITFREE defined and the ccmalloc library, it is possible
+to detect memory leaks.  Some memory will always be reported as leaked, such
+as allocated by X11 library functions and the memory allocated in
+alloc_cmdbuff() to store the ":quit" command.
 
 Moved the code for printing to src/hardcopy.c.
 
@@ -2037,8 +2038,8 @@ Removed the "COUNT" flag from ":argadd", to avoid ":argadd 1*" to be used like
 
 Avoid that $LANG is used for the menus when LC_MESSAGES is "en_US".
 
-Added backslashes before dashes in the vim.1 manual page to make the appear as
-real dashes. (Pierr Habouzit)
+Added backslashes before dashes in the vim.1 manual page to make them appear
+as real dashes. (Pierre Habouzit)
 
 Where "gq" left the cursor depended on the value of 'formatprg'.  Now "gq"
 always leaves the cursor at the last line of the formatted text.
@@ -2048,7 +2049,7 @@ detection may try to check the contents of the file while it's still
 compressed.  Skip setting 'filetype' for compressed files until they have been
 decompressed.  Required for patterns that end in a "*".
 
-Starting with an argument "+cmd" or "-S script" causes the cursor the be moved
+Starting with an argument "+cmd" or "-S script" causes the cursor to be moved
 to the first line.  That breaks a BufReadPost autocommand that uses g`".
 Don't move the cursor if it's somewhere past the first line.
 
@@ -6484,7 +6485,7 @@ Patch 7.1.282 (extra)
 Problem:    Win64: Edit with Vim context menu isn't installed correctly.
 	    Compiler warnings and a few other things.
 Solution:   Add [ and ] to entry of class name.  Use UINT_PTR instead of UINT.
-	    And a fixes for the other things. (George V.  Reilly)
+	    And fixes for other things. (George V.  Reilly)
 Files:	    src/GvimExt/Makefile, src/dosinst.c, src/if_ole.cpp, src/if_ole.h,
 	    src/if_ole.idl, src/INSTALLpc.txt,  src/Make_mvc.mak,
 	    src/os_win32.c,
@@ -7188,7 +7189,7 @@ More encryption					*new-more-encryption*
 ---------------
 
 Support for Blowfish encryption.  Added the 'cryptmethod' option.
-Mostly by Moshin Ahmed.
+Mostly by Mohsin Ahmed.
 
 Also encrypt the text in the swap file and the undo file.
 
@@ -15782,7 +15783,7 @@ Files:	    src/if_py_both.h, src/if_python3.c, src/testdir/test86.in,
 	    src/testdir/test87.ok
 
 Patch 7.3.944
-Problem:    External program receives the termrespone.
+Problem:    External program receives the termresponse.
 Solution:   Insert a delay and discard input. (Hayaki Saito)
 Files:	    src/term.c
 

runtime/doc/vi_diff.txt

@@ -540,7 +540,7 @@ character (and shows it immediately).
 Added :wnext command.  Same as ":write" followed by ":next".
 
 The ":w!" command always writes, also when the file is write protected.  In Vi
-you would have to do ":!chmod +w %" and ":set noro".
+you would have to do ":!chmod +w %:S" and ":set noro".
 
 When 'tildeop' has been set, "~" is an operator (must be followed by a
 movement command).

runtime/doc/vim.1

@@ -135,7 +135,7 @@ For the first file the cursor will be positioned on line "num".
 If "num" is missing, the cursor will be positioned on the last line.
 .TP
 +/{pat}
-For the first file the cursor will be positioned on the
+For the first file the cursor will be positioned in the line with the
 first occurrence of {pat}.
 See ":help search\-pattern" for the available search patterns.
 .TP

runtime/doc/visual.txt

@@ -1,4 +1,4 @@
-*visual.txt*    For Vim version 7.4.  Last change: 2013 Nov 02
+*visual.txt*    For Vim version 7.4.  Last change: 2014 Mar 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -22,7 +22,7 @@ This is introduced in section |04.4| of the user manual.
 
 {Vi has no Visual mode, the name "visual" is used for Normal mode, to
 distinguish it from Ex mode}
-{not available when the |+visual| feature was disabled when compiling}
+{Since Vim 7.4.200 the |+visual| feature is always included}
 
 ==============================================================================
 1. Using Visual mode					*visual-use*

runtime/doc/windows.txt

@@ -1,4 +1,4 @@
-*windows.txt*   For Vim version 7.4.  Last change: 2012 Nov 15
+*windows.txt*   For Vim version 7.4.  Last change: 2015 Jan 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -132,13 +132,20 @@ that have termcap codes for italics.
 CTRL-W s						*CTRL-W_s*
 CTRL-W S						*CTRL-W_S*
 CTRL-W CTRL-S						*CTRL-W_CTRL-S*
-:[N]sp[lit] [++opt] [+cmd]				*:sp* *:split*
+:[N]sp[lit] [++opt] [+cmd] [file]			*:sp* *:split*
 		Split current window in two.  The result is two viewports on
-		the same file.  Make new window N high (default is to use half
-		the height of the current window).  Reduces the current window
-		height to create room (and others, if the 'equalalways' option
-		is set, 'eadirection' isn't "hor", and one of them is higher
-		than the current or the new window).
+		the same file.
+		
+		Make the new window N high (default is to use half the height
+		of the current window).  Reduces the current window height to
+		create room (and others, if the 'equalalways' option is set,
+		'eadirection' isn't "hor", and one of them is higher than the
+		current or the new window).
+
+		If [file] is given it will be edited in the new window.  If it
+		is not loaded in any buffer, it will be read.  Else the new
+		window will use the already loaded buffer.
+
 		Note: CTRL-S does not work on all terminals and might block
 		further input, use CTRL-Q to get going again.
 		Also see |++opt| and |+cmd|.
@@ -256,28 +263,57 @@ left of the Vim window.
 Closing a window
 ----------------
 
+:q[uit]
+:{count}q[uit]
 CTRL-W q						*CTRL-W_q*
 CTRL-W CTRL-Q						*CTRL-W_CTRL-Q*
-:q[uit]		Quit current window.  When quitting the last window (not
-		counting a help window), exit Vim.
+		Without {count}: Quit the current window.  If {count} is
+		given quit the {count} window.
+
+		When quitting the last window (not counting a help window),
+		exit Vim.
+		
 		When 'hidden' is set, and there is only one window for the
-		current buffer, it becomes hidden.
-		When 'hidden' is not set, and there is only one window for the
-		current buffer, and the buffer was changed, the command fails.
-		(Note: CTRL-Q does not work on all terminals)
+		current buffer, it becomes hidden.  When 'hidden' is not set,
+		and there is only one window for the current buffer, and the
+		buffer was changed, the command fails.
+		
+		(Note: CTRL-Q does not work on all terminals).
+		
+		If [count] is greater than the last window number the last
+		window will be closed: >
+		    :1quit  " quit the first window
+		    :$quit  " quit the last window
+		    :9quit  " quit the last window
+			     " if there are less than 9 windows opened
+		    :-quit  " quit the previews window
+		    :+quit  " quit the next window
+		    :+2quit " quit the second next window
+<
+:q[uit]!
+:{count}q[uit]!
+		Without {count}: Quit the current window.  If {count} is
+		given quit the {count} window.
 
-:q[uit]!	Quit current window.  If this was the last window for a buffer,
-		any changes to that buffer are lost.  When quitting the last
-		window (not counting help windows), exit Vim.  The contents of
-		the buffer are lost, even when 'hidden' is set.
+		If this was the last window for a buffer, any changes to that
+		buffer are lost.  When quitting the last window (not counting
+		help windows), exit Vim.  The contents of the buffer are lost,
+		even when 'hidden' is set.
 
+:clo[se][!]
+:{count}clo[se][!]
 CTRL-W c					*CTRL-W_c* *:clo* *:close*
-:clo[se][!]	Close current window.  When the 'hidden' option is set, or
-		when the buffer was changed and the [!] is used, the buffer
-		becomes hidden (unless there is another window editing it).
+		Without {count}: Close the current window.  If {count} is
+		given close the {count} window.
+
+		When the 'hidden' option is set, or when the buffer was
+		changed and the [!] is used, the buffer becomes hidden (unless
+		there is another window editing it).
+		
 		When there is only one window in the current tab page and
 		there is another tab page, this closes the current tab page.
 		|tab-page|.
+
 		This command fails when:			*E444*
 		- There is only one window on the screen.
 		- When 'hidden' is not set, [!] is not used, the buffer has
@@ -291,14 +327,19 @@ CTRL-W CTRL-C						*CTRL-W_CTRL-C*
 		command.
 
 							*:hide*
-:hid[e]		Quit current window, unless it is the last window on the
-		screen.  The buffer becomes hidden (unless there is another
-		window editing it or 'bufhidden' is "unload" or "delete").
+:hid[e]
+:{count}hid[e]
+		Quit the current window, unless it is the last window on the
+		screen.  For {count} see |:quit| command.
+		
+		The buffer becomes hidden (unless there is another window
+		editing it or 'bufhidden' is "unload", "delete" or "wipe").
 		If the window is the last one in the current tab page the tab
-		page is closed. |tab-page|
-		The value of 'hidden' is irrelevant for this command.
-		Changes to the buffer are not written and won't get lost, so
-		this is a "safe" command.
+		page is closed.  |tab-page| 
+		
+		The value of 'hidden' is irrelevant for this command.  Changes
+		to the buffer are not written and won't get lost, so this is a
+		"safe" command.
 
 :hid[e] {cmd}	Execute {cmd} with 'hidden' is set.  The previous value of
 		'hidden' is restored after {cmd} has been executed.
@@ -307,12 +348,16 @@ CTRL-W CTRL-C						*CTRL-W_CTRL-C*
 <		This will edit "Makefile", and hide the current buffer if it
 		has any changes.
 
+:on[ly][!]
+:{count}on[ly][!]
 CTRL-W o						*CTRL-W_o* *E445*
 CTRL-W CTRL-O					*CTRL-W_CTRL-O* *:on* *:only*
-:on[ly][!]	Make the current window the only one on the screen.  All other
-		windows are closed.
+		Make the current window the only one on the screen.  All other
+		windows are closed.  For {count} see |:quit| command.
+		
 		When the 'hidden' option is set, all buffers in closed windows
 		become hidden.
+		
 		When 'hidden' is not set, and the 'autowrite' option is set,
 		modified buffers are written.  Otherwise, windows that have
 		buffers that are modified are not removed, unless the [!] is
@@ -653,8 +698,9 @@ can also get to them with the buffer list commands, like ":bnext".
 8. Do a command in all buffers or windows			*list-repeat*
 
 							*:windo*
-:windo {cmd}		Execute {cmd} in each window.
-			It works like doing this: >
+:[range]windo {cmd}	Execute {cmd} in each window or if [range] is given
+			only in windows for which the window number lies in
+			the [range].  It works like doing this: >
 				CTRL-W t
 				:{cmd}
 				CTRL-W w
@@ -672,8 +718,10 @@ can also get to them with the buffer list commands, like ":bnext".
 			Also see |:tabdo|, |:argdo| and |:bufdo|.
 
 							*:bufdo*
-:bufdo[!] {cmd}		Execute {cmd} in each buffer in the buffer list.
-			It works like doing this: >
+:[range]bufdo[!] {cmd}	Execute {cmd} in each buffer in the buffer list or if
+			[range] is given only for buffers for which their
+			buffer numer is in the [range].  It works like doing
+			this: >
 				:bfirst
 				:{cmd}
 				:bnext
@@ -719,18 +767,21 @@ the buffer.  The result is that all buffers will use the 'encoding' encoding
 
 CTRL-W ]					*CTRL-W_]* *CTRL-W_CTRL-]*
 CTRL-W CTRL-]	Split current window in two.  Use identifier under cursor as a
-		tag and jump to it in the new upper window.  Make new window N
-		high.
+		tag and jump to it in the new upper window.
+		In Visual mode uses the Visually selected text as a tag.
+		Make new window N high.
 
 							*CTRL-W_g]*
 CTRL-W g ]	Split current window in two.  Use identifier under cursor as a
 		tag and perform ":tselect" on it in the new upper window.
+		In Visual mode uses the Visually selected text as a tag.
 		Make new window N high.
 
 							*CTRL-W_g_CTRL-]*
 CTRL-W g CTRL-]	Split current window in two.  Use identifier under cursor as a
-		tag and perform ":tjump" on it in the new upper window.  Make
-		new window N high.
+		tag and perform ":tjump" on it in the new upper window.
+		In Visual mode uses the Visually selected text as a tag.
+		Make new window N high.
 
 CTRL-W f					*CTRL-W_f* *CTRL-W_CTRL-F*
 CTRL-W CTRL-F	Split current window in two.  Edit file name under cursor.
@@ -947,8 +998,8 @@ list of buffers. |unlisted-buffer|
 		(the term "unlisted" is a bit confusing then...).
 
 		Each buffer has a unique number.  That number will not change,
-		so you can always go to a specific buffer with ":buffer N" or
-		"N CTRL-^", where N is the buffer number.
+		thus you can always go to a specific buffer with ":buffer N"
+		or "N CTRL-^", where N is the buffer number.
 
 		Indicators (chars in the same column are mutually exclusive):
 		u	an unlisted buffer (only displayed when [!] is used)
@@ -982,7 +1033,11 @@ list of buffers. |unlisted-buffer|
 		Actually, the buffer isn't completely deleted, it is removed
 		from the buffer list |unlisted-buffer| and option values,
 		variables and mappings/abbreviations for the buffer are
-		cleared.
+		cleared. Examples: >
+		    :.,$-bdelete    " delete buffers from the current one to
+				    " last but one
+		    :%bdelete	    " delete all buffers
+<
 
 :bdelete[!] {bufname}						*E93* *E94*
 		Like ":bdelete[!] [N]", but buffer given by name.  Note that a
@@ -1006,7 +1061,11 @@ list of buffers. |unlisted-buffer|
 		Like |:bdelete|, but really delete the buffer.  Everything
 		related to the buffer is lost.  All marks in this buffer
 		become invalid, option settings are lost, etc.  Don't use this
-		unless you know what you are doing.
+		unless you know what you are doing. Examples: >
+		    :.+,$bwipeout   " wipe out all buffers after the current
+				    " one
+		    :%bwipeout	    " wipe out all buffers
+<
 
 :[N]bun[load][!]				*:bun* *:bunload* *E515*
 :bun[load][!] [N]
@@ -1035,36 +1094,41 @@ list of buffers. |unlisted-buffer|
 		a number).  Insert a backslash before a space in a buffer
 		name.
 
-:[N]b[uffer][!] [N]			*:b* *:bu* *:buf* *:buffer* *E86*
+:[N]b[uffer][!] [+cmd] [N]		*:b* *:bu* *:buf* *:buffer* *E86*
 		Edit buffer [N] from the buffer list.  If [N] is not given,
 		the current buffer remains being edited.  See |:buffer-!| for
 		[!].  This will also edit a buffer that is not in the buffer
 		list, without setting the 'buflisted' flag.
+		Also see ||+cmd|.
 
-:[N]b[uffer][!] {bufname}
+:[N]b[uffer][!] [+cmd] {bufname}
 		Edit buffer for {bufname} from the buffer list.  See
 		|:buffer-!| for [!].  This will also edit a buffer that is not
 		in the buffer list, without setting the 'buflisted' flag.
+		Also see ||+cmd|.
 
-:[N]sb[uffer] [N]					*:sb* *:sbuffer*
+:[N]sb[uffer] [+cmd] [N]				*:sb* *:sbuffer*
 		Split window and edit buffer [N] from the buffer list.  If [N]
 		is not given, the current buffer is edited.  Respects the
 		"useopen" setting of 'switchbuf' when splitting.  This will
 		also edit a buffer that is not in the buffer list, without
 		setting the 'buflisted' flag.
+		Also see ||+cmd|.
 
-:[N]sb[uffer] {bufname}
+:[N]sb[uffer] [+cmd] {bufname}
 		Split window and edit buffer for {bufname} from the buffer
 		list.  This will also edit a buffer that is not in the buffer
 		list, without setting the 'buflisted' flag.
 		Note: If what you want to do is split the buffer, make a copy
 		under another name, you can do it this way: >
 			:w foobar | sp #
+<		Also see ||+cmd|.
 
-:[N]bn[ext][!] [N]					*:bn* *:bnext* *E87*
+:[N]bn[ext][!] [+cmd] [N]				*:bn* *:bnext* *E87*
 		Go to [N]th next buffer in buffer list.  [N] defaults to one.
 		Wraps around the end of the buffer list.
 		See |:buffer-!| for [!].
+		Also see ||+cmd|.
 		If you are in a help buffer, this takes you to the next help
 		buffer (if there is one).  Similarly, if you are in a normal
 		(non-help) buffer, this takes you to the next normal buffer.
@@ -1072,55 +1136,61 @@ list of buffers. |unlisted-buffer|
 		the way when you're browsing code/text buffers.  The next three
 		commands also work like this.
 
+
 							*:sbn* *:sbnext*
-:[N]sbn[ext] [N]
+:[N]sbn[ext] [+cmd] [N]
 		Split window and go to [N]th next buffer in buffer list.
 		Wraps around the end of the buffer list.  Uses 'switchbuf'
+		Also see ||+cmd|.
 
-:[N]bN[ext][!] [N]			*:bN* *:bNext* *:bp* *:bprevious* *E88*
-:[N]bp[revious][!] [N]
+:[N]bN[ext][!] [+cmd] [N]		*:bN* *:bNext* *:bp* *:bprevious* *E88*
+:[N]bp[revious][!] [+cmd] [N]
 		Go to [N]th previous buffer in buffer list.  [N] defaults to
 		one.  Wraps around the start of the buffer list.
 		See |:buffer-!| for [!] and 'switchbuf'.
+		Also see ||+cmd|.
 
-:[N]sbN[ext] [N]			*:sbN* *:sbNext* *:sbp* *:sbprevious*
-:[N]sbp[revious] [N]
+:[N]sbN[ext] [+cmd] [N]			*:sbN* *:sbNext* *:sbp* *:sbprevious*
+:[N]sbp[revious] [+cmd] [N]
 		Split window and go to [N]th previous buffer in buffer list.
 		Wraps around the start of the buffer list.
 		Uses 'switchbuf'.
+		Also see ||+cmd|.
 
-							*:br* *:brewind*
-:br[ewind][!]	Go to first buffer in buffer list.  If the buffer list is
+:br[ewind][!] [+cmd]					*:br* *:brewind*
+		Go to first buffer in buffer list.  If the buffer list is
 		empty, go to the first unlisted buffer.
 		See |:buffer-!| for [!].
 
-							*:bf* *:bfirst*
-:bf[irst]	Same as ":brewind".
+:bf[irst] [+cmd]					*:bf* *:bfirst*
+		Same as |:brewind|.
+		Also see |+cmd|.
 
-							*:sbr* *:sbrewind*
-:sbr[ewind]	Split window and go to first buffer in buffer list.  If the
+:sbr[ewind] [+cmd]					*:sbr* *:sbrewind*
+		Split window and go to first buffer in buffer list.  If the
 		buffer list is empty, go to the first unlisted buffer.
 		Respects the 'switchbuf' option.
+		Also see |+cmd|.
 
-							*:sbf* *:sbfirst*
-:sbf[irst]	Same as ":sbrewind".
+:sbf[irst] [+cmd]					*:sbf* *:sbfirst*
+		Same as ":sbrewind".
 
-							*:bl* *:blast*
-:bl[ast][!]	Go to last buffer in buffer list.  If the buffer list is
+:bl[ast][!] [+cmd]					*:bl* *:blast*
+		Go to last buffer in buffer list.  If the buffer list is
 		empty, go to the last unlisted buffer.
 		See |:buffer-!| for [!].
 
-							*:sbl* *:sblast*
-:sbl[ast]	Split window and go to last buffer in buffer list.  If the
+:sbl[ast] [+cmd]					*:sbl* *:sblast*
+		Split window and go to last buffer in buffer list.  If the
 		buffer list is empty, go to the last unlisted buffer.
 		Respects 'switchbuf' option.
 
-:[N]bm[odified][!] [N]				*:bm* *:bmodified* *E84*
+:[N]bm[odified][!] [+cmd] [N]			*:bm* *:bmodified* *E84*
 		Go to [N]th next modified buffer.  Note: this command also
 		finds unlisted buffers.  If there is no modified buffer the
 		command fails.
 
-:[N]sbm[odified] [N]					*:sbm* *:sbmodified*
+:[N]sbm[odified] [+cmd] [N]				*:sbm* *:sbmodified*
 		Split window and go to [N]th next modified buffer.
 		Respects 'switchbuf' option.
 		Note: this command also finds buffers not in the buffer list.

runtime/doc/xxd.1

@@ -76,6 +76,16 @@ Change the character encoding in the righthand column from ASCII to EBCDIC.
 This does not change the hexadecimal representation. The option is
 meaningless in combinations with \-r, \-p or \-i.
 .TP
+.IR \-e
+Switch to little-endian hexdump.
+This option treats byte groups as words in little-endian byte order.
+The default grouping of 4 bytes may be changed using
+.RI "" \-g .
+This option only applies to hexdump, leaving the ASCII (or EBCDIC)
+representation unchanged.
+The command line switches
+\-r, \-p, \-i do not work with this mode.
+.TP
 .IR "\-g bytes " | " \-groupsize bytes"
 separate the output of every
 .RI < bytes >
@@ -84,7 +94,7 @@ Specify
 .I \-g 0
 to suppress grouping.
 .RI < Bytes "> defaults to " 2
-in normal mode and \fI1\fP in bits mode.
+in normal mode, \fI4\fP in little-endian mode and \fI1\fP in bits mode.
 Grouping does not apply to postscript or include style.
 .TP
 .IR \-h " | " \-help
@@ -99,6 +109,11 @@ stop after writing
 .RI  < len >
 octets.
 .TP
+.I \-o offset
+add
+.RI < offset >
+to the displayed file position.
+.TP
 .IR \-p " | " \-ps " | " \-postscript " | " \-plain
 output in postscript continuous hexdump style. Also known as plain hexdump
 style.

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2013 Oct 06
+" Last Change:	2015 Jun 06
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -106,6 +106,9 @@ au BufNewFile,BufRead *.run			setf ampl
 " Ant
 au BufNewFile,BufRead build.xml			setf ant
 
+" Arduino
+au BufNewFile,BufRead *.ino,*.pde		setf arduino
+
 " Apache style config file
 au BufNewFile,BufRead proftpd.conf*		call s:StarSetf('apachestyle')
 
@@ -496,7 +499,7 @@ au BufNewFile,BufRead *.prg
 	\ endif
 
 " Clojure
-au BufNewFile,BufRead *.clj,*.cljs		setf clojure
+au BufNewFile,BufRead *.clj,*.cljs,*.cljx,*.cljc		setf clojure
 
 " Cmake
 au BufNewFile,BufRead CMakeLists.txt,*.cmake,*.cmake.in		setf cmake
@@ -527,6 +530,9 @@ au BufNewFile,BufRead configure.in,configure.ac setf config
 " CUDA  Cumpute Unified Device Architecture
 au BufNewFile,BufRead *.cu			setf cuda
 
+" Dockerfile
+au BufNewFile,BufRead Dockerfile		setf dockerfile
+
 " WildPackets EtherPeek Decoder
 au BufNewFile,BufRead *.dcd			setf dcd
 
@@ -536,6 +542,20 @@ au BufNewFile,BufRead *enlightenment/*.cfg	setf c
 " Eterm
 au BufNewFile,BufRead *Eterm/*.cfg		setf eterm
 
+" Euphoria 3 or 4
+au BufNewFile,BufRead *.eu,*.ew,*.ex,*.exu,*.exw  call s:EuphoriaCheck()
+if has("fname_case")
+   au BufNewFile,BufRead *.EU,*.EW,*.EX,*.EXU,*.EXW  call s:EuphoriaCheck()
+endif
+
+func! s:EuphoriaCheck()
+  if exists('g:filetype_euphoria')
+    exe 'setf ' . g:filetype_euphoria
+  else
+    setf euphoria3
+  endif
+endfunc
+
 " Lynx config files
 au BufNewFile,BufRead lynx.cfg			setf lynx
 
@@ -656,22 +676,26 @@ au BufNewFile,BufRead *.ed\(f\|if\|n\|o\)	setf edif
 " Embedix Component Description
 au BufNewFile,BufRead *.ecd			setf ecd
 
-" Eiffel or Specman
+" Eiffel or Specman or Euphoria
 au BufNewFile,BufRead *.e,*.E			call s:FTe()
 
 " Elinks configuration
 au BufNewFile,BufRead */etc/elinks.conf,*/.elinks/elinks.conf	setf elinks
 
 func! s:FTe()
-  let n = 1
-  while n < 100 && n < line("$")
-    if getline(n) =~ "^\\s*\\(<'\\|'>\\)\\s*$"
-      setf specman
-      return
-    endif
-    let n = n + 1
-  endwhile
-  setf eiffel
+  if exists('g:filetype_euphoria')
+    exe 'setf ' . g:filetype_euphoria
+  else
+    let n = 1
+    while n < 100 && n < line("$")
+      if getline(n) =~ "^\\s*\\(<'\\|'>\\)\\s*$"
+        setf specman
+        return
+      endif
+      let n = n + 1
+    endwhile
+    setf eiffel
+  endif
 endfunc
 
 " ERicsson LANGuage; Yaws is erlang too
@@ -752,12 +776,14 @@ au BufNewFile,BufRead *.mo,*.gdmo		setf gdmo
 au BufNewFile,BufRead *.ged,lltxxxxx.txt	setf gedcom
 
 " Git
-au BufNewFile,BufRead *.git/COMMIT_EDITMSG	setf gitcommit
-au BufNewFile,BufRead *.git/MERGE_MSG		setf gitcommit
+au BufNewFile,BufRead COMMIT_EDITMSG		setf gitcommit
+au BufNewFile,BufRead MERGE_MSG			setf gitcommit
 au BufNewFile,BufRead *.git/config,.gitconfig,.gitmodules setf gitconfig
-au BufNewFile,BufRead *.git/modules/*/COMMIT_EDITMSG setf gitcommit
 au BufNewFile,BufRead *.git/modules/*/config	setf gitconfig
 au BufNewFile,BufRead */.config/git/config	setf gitconfig
+if !empty($XDG_CONFIG_HOME)
+  au BufNewFile,BufRead $XDG_CONFIG_HOME/git/config	setf gitconfig
+endif
 au BufNewFile,BufRead git-rebase-todo		setf gitrebase
 au BufNewFile,BufRead .msg.[0-9]*
       \ if getline(1) =~ '^From.*# This line is ignored.$' |
@@ -790,6 +816,9 @@ au BufNewFile,BufRead {,.}gitolite.rc,example.gitolite.rc	setf perl
 " Gnuplot scripts
 au BufNewFile,BufRead *.gpi			setf gnuplot
 
+" Go (Google)
+au BufNewFile,BufRead *.go			setf go
+
 " GrADS scripts
 au BufNewFile,BufRead *.gs			setf grads
 
@@ -843,7 +872,7 @@ func! s:FThtml()
       setf xhtml
       return
     endif
-    if getline(n) =~ '{%\s*\(extends\|block\)\>'
+    if getline(n) =~ '{%\s*\(extends\|block\|load\)\>'
       setf htmldjango
       return
     endif
@@ -968,7 +997,7 @@ au BufNewFile,BufRead *.java,*.jav		setf java
 au BufNewFile,BufRead *.jj,*.jjt		setf javacc
 
 " JavaScript, ECMAScript
-au BufNewFile,BufRead *.js,*.javascript,*.es,*.jsx,*.json   setf javascript
+au BufNewFile,BufRead *.js,*.javascript,*.es,*.jsx   setf javascript
 
 " Java Server Pages
 au BufNewFile,BufRead *.jsp			setf jsp
@@ -986,12 +1015,18 @@ au BufNewFile,BufRead *.jgr			setf jgraph
 " Jovial
 au BufNewFile,BufRead *.jov,*.j73,*.jovial	setf jovial
 
+" JSON
+au BufNewFile,BufRead *.json,*.jsonp		setf json
+
 " Kixtart
 au BufNewFile,BufRead *.kix			setf kix
 
 " Kimwitu[++]
 au BufNewFile,BufRead *.k			setf kwt
 
+" Kivy
+au BufNewFile,BufRead *.kv			setf kivy
+
 " KDE script
 au BufNewFile,BufRead *.ks			setf kscript
 
@@ -1016,8 +1051,11 @@ au BufNewFile,BufRead *.ldif			setf ldif
 " Ld loader
 au BufNewFile,BufRead *.ld			setf ld
 
+" Less
+au BufNewFile,BufRead *.less			setf less
+
 " Lex
-au BufNewFile,BufRead *.lex,*.l			setf lex
+au BufNewFile,BufRead *.lex,*.l,*.lxx,*.l++	setf lex
 
 " Libao
 au BufNewFile,BufRead */etc/libao.conf,*/.libao	setf libao
@@ -1071,6 +1109,9 @@ au BufNewFile,BufRead *.lou,*.lout		setf lout
 " Lua
 au BufNewFile,BufRead *.lua			setf lua
 
+" Luarocks
+au BufNewFile,BufRead *.rockspec		setf lua
+
 " Linden Scripting Language (Second Life)
 au BufNewFile,BufRead *.lsl			setf lsl
 
@@ -1115,10 +1156,10 @@ au BufNewFile,BufRead *.mv,*.mpl,*.mws		setf maple
 au BufNewFile,BufRead *.map			setf map
 
 " Markdown
-au BufNewFile,BufRead *.markdown,*.mdown,*.mkd,*.mkdn,*.mdwn,README.md  setf markdown
+au BufNewFile,BufRead *.markdown,*.mdown,*.mkd,*.mkdn,*.mdwn,*.md  setf markdown
 
 " Mason
-au BufNewFile,BufRead *.mason,*.mhtml		setf mason
+au BufNewFile,BufRead *.mason,*.mhtml,*.comp	setf mason
 
 " Matlab or Objective C
 au BufNewFile,BufRead *.m			call s:FTm()
@@ -1172,6 +1213,9 @@ au BufNewFile,BufRead *.mp			setf mp
 " MGL
 au BufNewFile,BufRead *.mgl			setf mgl
 
+" MIX - Knuth assembly
+au BufNewFile,BufRead *.mix,*.mixal		setf mix
+
 " MMIX or VMS makefile
 au BufNewFile,BufRead *.mms			call s:FTmms()
 
@@ -1204,8 +1248,8 @@ au BufNewFile,BufRead *.mod
 	\   setf modsim3 |
 	\ endif
 
-" Modula 2
-au BufNewFile,BufRead *.m2,*.DEF,*.MOD,*.md,*.mi setf modula2
+" Modula 2  (.md removed in favor of Markdown)
+au BufNewFile,BufRead *.m2,*.DEF,*.MOD,*.mi	setf modula2
 
 " Modula 3 (.m3, .i3, .mg, .ig)
 au BufNewFile,BufRead *.[mi][3g]		setf modula3
@@ -1222,8 +1266,8 @@ au BufNewFile,BufRead */etc/modules.conf,*/etc/modules,*/etc/conf.modules setf m
 " Mplayer config
 au BufNewFile,BufRead mplayer.conf,*/.mplayer/config	setf mplayerconf
 
-" Moterola S record
-au BufNewFile,BufRead *.s19,*.s28,*.s37		setf srec
+" Motorola S record
+au BufNewFile,BufRead *.s19,*.s28,*.s37,*.mot,*.srec	setf srec
 
 " Mrxvtrc
 au BufNewFile,BufRead mrxvtrc,.mrxvtrc		setf mrxvtrc
@@ -1250,7 +1294,7 @@ au BufNewFile,BufRead *.mush			setf mush
 au BufNewFile,BufRead Mutt{ng,}rc		setf muttrc
 
 " Nano
-au BufNewFile,BufRead */etc/nanorc,.nanorc	setf nanorc
+au BufNewFile,BufRead */etc/nanorc,*.nanorc  	setf nanorc
 
 " Nastran input/DMAP
 "au BufNewFile,BufRead *.dat			setf nastran
@@ -1622,6 +1666,20 @@ else
   au BufNewFile,BufRead *.rnw,*.snw			setf rnoweb
 endif
 
+" R Markdown file
+if has("fname_case")
+  au BufNewFile,BufRead *.Rmd,*.rmd,*.Smd,*.smd		setf rmd
+else
+  au BufNewFile,BufRead *.rmd,*.smd			setf rmd
+endif
+
+" R reStructuredText file
+if has("fname_case")
+  au BufNewFile,BufRead *.Rrst,*.rrst,*.Srst,*.srst	setf rrst
+else
+  au BufNewFile,BufRead *.rrst,*.srst			setf rrst
+endif
+
 " Rexx, Rebol or R
 au BufNewFile,BufRead *.r,*.R			call s:FTr()
 
@@ -1800,7 +1858,7 @@ au BufNewFile,BufRead sgml.catalog*		call s:StarSetf('catalog')
 
 " Shell scripts (sh, ksh, bash, bash2, csh); Allow .profile_foo etc.
 " Gentoo ebuilds are actually bash scripts
-au BufNewFile,BufRead .bashrc*,bashrc,bash.bashrc,.bash_profile*,.bash_logout*,*.bash,*.ebuild call SetFileTypeSH("bash")
+au BufNewFile,BufRead .bashrc*,bashrc,bash.bashrc,.bash_profile*,.bash_logout*,.bash_aliases*,*.bash,*.ebuild call SetFileTypeSH("bash")
 au BufNewFile,BufRead .kshrc*,*.ksh call SetFileTypeSH("ksh")
 au BufNewFile,BufRead */etc/profile,.profile*,*.sh,*.env call SetFileTypeSH(getline(1))
 
@@ -1970,6 +2028,10 @@ func! s:FTRules()
     setf conf  " Better than hog
     return
   endif
+  if path =~ '^/\(etc\|usr/share\)/polkit-1/rules\.d'
+    setf javascript
+    return
+  endif
   try
     let config_lines = readfile('/etc/udev/udev.conf')
   catch /^Vim\%((\a\+)\)\=:E484/
@@ -2237,6 +2299,9 @@ au BufNewFile,BufRead *.v			setf verilog
 " Verilog-AMS HDL
 au BufNewFile,BufRead *.va,*.vams		setf verilogams
 
+" SystemVerilog
+au BufNewFile,BufRead *.sv,*.svh		setf systemverilog
+
 " VHDL
 au BufNewFile,BufRead *.hdl,*.vhd,*.vhdl,*.vbe,*.vst  setf vhdl
 au BufNewFile,BufRead *.vhdl_[0-9]*		call s:StarSetf('vhdl')
@@ -2267,6 +2332,9 @@ au BufNewFile,BufRead vgrindefs			setf vgrindefs
 " VRML V1.0c
 au BufNewFile,BufRead *.wrl			setf vrml
 
+" Vroom (vim testing and executable documentation)
+au BufNewFile,BufRead *.vroom			setf vroom
+
 " Webmacro
 au BufNewFile,BufRead *.wm			setf webmacro
 
@@ -2409,7 +2477,7 @@ au BufNewFile,BufRead *.xsd			setf xsd
 au BufNewFile,BufRead *.xsl,*.xslt		setf xslt
 
 " Yacc
-au BufNewFile,BufRead *.yy			setf yacc
+au BufNewFile,BufRead *.yy,*.yxx,*.y++		setf yacc
 
 " Yacc or racc
 au BufNewFile,BufRead *.y			call s:FTy()
@@ -2440,6 +2508,8 @@ au BufNewFile,BufRead */etc/yum.conf		setf dosini
 
 " Zimbu
 au BufNewFile,BufRead *.zu			setf zimbu
+" Zimbu Templates
+au BufNewFile,BufRead *.zut			setf zimbutempl
 
 " Zope
 "   dtml (zope dynamic template markup language), pt (zope page template),
@@ -2634,7 +2704,7 @@ au BufNewFile,BufRead zsh*,zlog*		call s:StarSetf('zsh')
 
 " Plain text files, needs to be far down to not override others.  This avoids
 " the "conf" type being used if there is a line starting with '#'.
-au BufNewFile,BufRead *.txt,*.text		setf text
+au BufNewFile,BufRead *.txt,*.text,README	setf text
 
 
 " Use the filetype detect plugins.  They may overrule any of the previously

runtime/ftplugin/changelog.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:         generic Changelog file
 " Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2012-08-23
+" Latest Revision:  2014-01-10
 " Variables:
 "   g:changelog_timeformat (deprecated: use g:changelog_dateformat instead) -
 "       description: the timeformat used in ChangeLog entries.
@@ -122,12 +122,12 @@ if &filetype == 'changelog'
 
   " Format used for new date entries.
   if !exists('g:changelog_new_date_format')
-    let g:changelog_new_date_format = "%d  %u\n\n\t* %c\n\n"
+    let g:changelog_new_date_format = "%d  %u\n\n\t* %p%c\n\n"
   endif
 
   " Format used for new entries to current date entry.
   if !exists('g:changelog_new_entry_format')
-    let g:changelog_new_entry_format = "\t* %c"
+    let g:changelog_new_entry_format = "\t* %p%c"
   endif
 
   " Regular expression used to find a given date entry.
@@ -143,16 +143,16 @@ if &filetype == 'changelog'
 
   " Substitutes specific items in new date-entry formats and search strings.
   " Can be done with substitute of course, but unclean, and need \@! then.
-  function! s:substitute_items(str, date, user)
+  function! s:substitute_items(str, date, user, prefix)
     let str = a:str
-    let middles = {'%': '%', 'd': a:date, 'u': a:user, 'c': '{cursor}'}
+    let middles = {'%': '%', 'd': a:date, 'u': a:user, 'p': a:prefix, 'c': '{cursor}'}
     let i = stridx(str, '%')
     while i != -1
       let inc = 0
       if has_key(middles, str[i + 1])
         let mid = middles[str[i + 1]]
         let str = strpart(str, 0, i) . mid . strpart(str, i + 2)
-        let inc = strlen(mid)
+        let inc = strlen(mid) - 1
       endif
       let i = stridx(str, '%', i + 1 + inc)
     endwhile
@@ -171,7 +171,7 @@ if &filetype == 'changelog'
   endfunction
 
   " Internal function to create a new entry in the ChangeLog.
-  function! s:new_changelog_entry()
+  function! s:new_changelog_entry(prefix)
     " Deal with 'paste' option.
     let save_paste = &paste
     let &paste = 1
@@ -179,7 +179,7 @@ if &filetype == 'changelog'
     " Look for an entry for today by our user.
     let date = strftime(g:changelog_dateformat)
     let search = s:substitute_items(g:changelog_date_entry_search, date,
-                                  \ s:username())
+                                  \ s:username(), a:prefix)
     if search(search) > 0
       " Ok, now we look for the end of the date entry, and add an entry.
       call cursor(nextnonblank(line('.') + 1), 1)
@@ -188,7 +188,7 @@ if &filetype == 'changelog'
       else
         let p = line('.')
       endif
-      let ls = split(s:substitute_items(g:changelog_new_entry_format, '', ''),
+      let ls = split(s:substitute_items(g:changelog_new_entry_format, '', '', a:prefix),
                    \ '\n')
       call append(p, ls)
       call cursor(p + 1, 1)
@@ -198,7 +198,7 @@ if &filetype == 'changelog'
 
       " No entry today, so create a date-user header and insert an entry.
       let todays_entry = s:substitute_items(g:changelog_new_date_format,
-                                          \ date, s:username())
+                                          \ date, s:username(), a:prefix)
       " Make sure we have a cursor positioning.
       if stridx(todays_entry, '{cursor}') == -1
         let todays_entry = todays_entry . '{cursor}'
@@ -206,7 +206,7 @@ if &filetype == 'changelog'
 
       " Now do the work.
       call append(0, split(todays_entry, '\n'))
-      
+
       " Remove empty lines at end of file.
       if remove_empty
         $-/^\s*$/-1,$delete
@@ -223,8 +223,8 @@ if &filetype == 'changelog'
   endfunction
 
   if exists(":NewChangelogEntry") != 2
-    noremap <buffer> <silent> <Leader>o <Esc>:call <SID>new_changelog_entry()<CR>
-    command! -nargs=0 NewChangelogEntry call s:new_changelog_entry()
+    noremap <buffer> <silent> <Leader>o <Esc>:call <SID>new_changelog_entry('')<CR>
+    command! -nargs=0 NewChangelogEntry call s:new_changelog_entry('')
   endif
 
   let b:undo_ftplugin = "setl com< fo< et< ai<"
@@ -277,10 +277,7 @@ else
     if exists('b:changelog_entry_prefix')
       let prefix = call(b:changelog_entry_prefix, [])
     else
-      let prefix = substitute(strpart(expand('%:p'), strlen(path)), '^/\+', "", "") . ':'
-    endif
-    if !empty(prefix)
-      let prefix = ' ' . prefix
+      let prefix = substitute(strpart(expand('%:p'), strlen(path)), '^/\+', "", "")
     endif
 
     let buf = bufnr(changelog)

runtime/ftplugin/clojure.vim

@@ -5,7 +5,7 @@
 " Maintainer:	Sung Pae <self@sungpae.com>
 " URL:		https://github.com/guns/vim-clojure-static
 " License:	Same as Vim
-" Last Change:	08 September 2013
+" Last Change:	27 March 2014
 
 if exists("b:did_ftplugin")
 	finish
@@ -15,7 +15,7 @@ let b:did_ftplugin = 1
 let s:cpo_save = &cpo
 set cpo&vim
 
-let b:undo_ftplugin = 'setlocal iskeyword< define< formatoptions< comments< commentstring<'
+let b:undo_ftplugin = 'setlocal iskeyword< define< formatoptions< comments< commentstring< lispwords<'
 
 setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$
 
@@ -23,14 +23,29 @@ setlocal iskeyword+=?,-,*,!,+,/,=,<,>,.,:,$
 " of user-defined def* definitions.
 setlocal define=\\v[(/]def(ault)@!\\S*
 
-" Remove 't' from 'formatoptions' to avoid auto-wrapping code. The '+=croql'
-" is standard ftplugin boilerplate, although it is arguably intrusive.
-setlocal formatoptions-=t formatoptions+=croql
+" Remove 't' from 'formatoptions' to avoid auto-wrapping code.
+setlocal formatoptions-=t
 
 " Lisp comments are routinely nested (e.g. ;;; SECTION HEADING)
 setlocal comments=n:;
 setlocal commentstring=;\ %s
 
+" Specially indented symbols from clojure.core and clojure.test.
+"
+" Clojure symbols are indented in the defn style when they:
+"
+"   * Define vars and anonymous functions
+"   * Create new lexical scopes or scopes with altered environments
+"   * Create conditional branches from a predicate function or value
+"
+" The arglists for these functions are generally in the form of [x & body];
+" Functions that accept a flat list of forms do not treat the first argument
+" specially and hence are not indented specially.
+"
+" -*- LISPWORDS -*-
+" Generated from https://github.com/guns/vim-clojure-static/blob/vim-release-010/clj/src/vim_clojure_static/generate.clj
+setlocal lispwords=as->,binding,bound-fn,case,catch,cond->,cond->>,condp,def,definline,definterface,defmacro,defmethod,defmulti,defn,defn-,defonce,defprotocol,defrecord,defstruct,deftest,deftest-,deftype,doseq,dotimes,doto,extend,extend-protocol,extend-type,fn,for,if,if-let,if-not,if-some,let,letfn,locking,loop,ns,proxy,reify,set-test,testing,when,when-first,when-let,when-not,when-some,while,with-bindings,with-in-str,with-local-vars,with-open,with-precision,with-redefs,with-redefs-fn,with-test
+
 " Provide insert mode completions for special forms and clojure.core. As
 " 'omnifunc' is set by popular Clojure REPL client plugins, we also set
 " 'completefunc' so that the user has some form of completion available when

runtime/ftplugin/cobol.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	cobol
 " Author:	Tim Pope <vimNOSPAM@tpope.info>
-" $Id: cobol.vim,v 1.1 2007/05/05 17:24:38 vimboss Exp $
+" Last Update:	By ZyX: use shiftwidth()
 
 " Insert mode mappings: <C-T> <C-D> <Tab>
 " Normal mode mappings: < > << >> [[ ]] [] ][
@@ -113,7 +113,7 @@ endfunction
 
 function! s:increase(...)
     let lnum = '.'
-    let sw = &shiftwidth
+    let sw = shiftwidth()
     let i = a:0 ? a:1 : indent(lnum)
     if i >= 11
         return sw - (i - 11) % sw
@@ -128,7 +128,7 @@ endfunction
 
 function! s:decrease(...)
     let lnum = '.'
-    let sw = &shiftwidth
+    let sw = shiftwidth()
     let i = indent(a:0 ? a:1 : lnum)
     if i >= 11 + sw
         return 1 + (i + 12) % sw
@@ -147,7 +147,7 @@ function! CobolIndentBlock(shift)
     let head = strpart(getline('.'),0,7)
     let tail = strpart(getline('.'),7)
     let indent = match(tail,'[^ ]')
-    let sw = &shiftwidth
+    let sw = shiftwidth()
     let shift = a:shift
     if shift > 0
         if indent < 4
@@ -221,7 +221,8 @@ endfunction
 function! s:Tab()
     if (strpart(getline('.'),0,col('.')-1) =~ '^\s*$' && &sta)
         return s:IncreaseIndent()
-    elseif &sts == &sw && &sts != 8 && &et
+    " &softtabstop < 0: &softtabstop follows &shiftwidth
+    elseif (&sts < 0 || &sts == shiftwidth()) && &sts != 8 && &et
         return s:repeat(" ",s:increase(col('.')-1))
     else
         return "\<Tab>"

runtime/ftplugin/debchangelog.vim

@@ -3,7 +3,7 @@
 " Maintainer:   Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
 " Former Maintainers:   Michael Piefel <piefel@informatik.hu-berlin.de>
 "                       Stefano Zacchiroli <zack@debian.org>
-" Last Change:  2012-01-31
+" Last Change:  2014-01-31
 " License:      Vim License
 " URL:          http://hg.debian.org/hg/pkg-vim/vim/file/unstable/runtime/ftplugin/debchangelog.vim
 
@@ -152,7 +152,7 @@ function CloseBug()
 endfunction
 
 function Distribution(dist)
-    call setline(1, substitute(getline(1), ") [[:lower:] ]*;", ") " . a:dist . ";", ""))
+    call setline(1, substitute(getline(1), ')  *\%(UNRELEASED\|\l\+\);', ") " . a:dist . ";", ""))
 endfunction
 
 function Urgency(urg)

runtime/ftplugin/dockerfile.vim

@@ -0,0 +1,16 @@
+" Vim filetype plugin
+" Language:	Dockerfile
+" Maintainer:   Honza Pokorny <http://honza.ca>
+" Last Change:	2014 Aug 29
+
+" Only do this when not done yet for this buffer
+if exists("b:did_ftplugin")
+  finish
+endif
+
+" Don't load another plugin for this buffer
+let b:did_ftplugin = 1
+
+let b:undo_ftplugin = "setl commentstring<"
+
+setlocal commentstring=#\ %s

runtime/ftplugin/go.vim

@@ -0,0 +1,18 @@
+" Vim filetype plugin file
+" Language:	Go
+" Maintainer:	David Barnett (https://github.com/google/vim-ft-go)
+" Last Change:	2014 Aug 16
+
+if exists('b:did_ftplugin')
+  finish
+endif
+let b:did_ftplugin = 1
+
+setlocal formatoptions-=t
+
+setlocal comments=s1:/*,mb:*,ex:*/,://
+setlocal commentstring=//\ %s
+
+let b:undo_ftplugin = 'setl fo< com< cms<'
+
+" vim: sw=2 sts=2 et

runtime/ftplugin/html.vim

@@ -20,49 +20,9 @@ if exists("g:ft_html_autocomment") && (g:ft_html_autocomment == 1)
     setlocal formatoptions-=t formatoptions+=croql
 endif
 
-
 if exists('&omnifunc')
-    " Distinguish between HTML versions
-    " To use with other HTML versions add another
-    " elseif condition to match proper DOCTYPE
-    setlocal omnifunc=htmlcomplete#CompleteTags
-
-    if &filetype == 'xhtml'
-            let b:html_omni_flavor = 'xhtml10s'
-    else
-            let b:html_omni_flavor = 'html401t'
-    endif
-    let i = 1
-    let line = ""
-    while i < 10 && i < line("$")
-        let line = getline(i)
-        if line =~ '<!DOCTYPE.*\<DTD '
-            break
-        endif
-        let i += 1
-    endwhile
-    if line =~ '<!DOCTYPE.*\<DTD '  " doctype line found above
-        if line =~ ' HTML 3\.2'
-            let b:html_omni_flavor = 'html32'
-        elseif line =~ ' XHTML 1\.1'
-            let b:html_omni_flavor = 'xhtml11'
-        else    " two-step detection with strict/frameset/transitional
-            if line =~ ' XHTML 1\.0'
-                let b:html_omni_flavor = 'xhtml10'
-            elseif line =~ ' HTML 4\.01'
-                let b:html_omni_flavor = 'html401'
-            elseif line =~ ' HTML 4.0\>'
-                let b:html_omni_flavor = 'html40'
-            endif
-            if line =~ '\<Transitional\>'
-                let b:html_omni_flavor .= 't'
-            elseif line =~ '\<Frameset\>'
-                let b:html_omni_flavor .= 'f'
-            else
-                let b:html_omni_flavor .= 's'
-            endif
-        endif
-    endif
+  setlocal omnifunc=htmlcomplete#CompleteTags
+  call htmlcomplete#DetectOmniFlavor()
 endif
 
 " HTML:  thanks to Johannes Zellner and Benji Fisher.

runtime/ftplugin/j.vim

@@ -1,18 +1,74 @@
 " Vim filetype plugin
 " Language:	J
 " Maintainer:	David Bürgin <676c7473@gmail.com>
-" Last Change:	2013-10-06
+" URL:		https://github.com/glts/vim-j
+" Last Change:	2015-03-27
 
-if exists("b:did_ftplugin")
+if exists('b:did_ftplugin')
   finish
 endif
 let b:did_ftplugin = 1
 
-setlocal iskeyword=48-57,65-90,_,97-122
+let s:save_cpo = &cpo
+set cpo&vim
+
+setlocal iskeyword=48-57,A-Z,_,a-z
 setlocal comments=:NB.
 setlocal commentstring=NB.\ %s
 setlocal formatoptions-=t
-setlocal shiftwidth=2 softtabstop=2 expandtab
 setlocal matchpairs=(:)
 
-let b:undo_ftplugin = "setl mps< et< sts< sw< fo< cms< com< isk<"
+let b:undo_ftplugin = 'setlocal matchpairs< formatoptions< commentstring< comments< iskeyword<'
+
+" Section movement with ]] ][ [[ []. The start/end patterns below are amended
+" inside the function in order to avoid matching on the current cursor line.
+let s:sectionstart = '\%(\s*Note\|.\{-}\<\%([0-4]\|13\|noun\|adverb\|conjunction\|verb\|monad\|dyad\)\s\+\%(:\s*0\|def\s\+0\|define\)\)\>.*'
+let s:sectionend = '\s*)\s*'
+
+function! s:SearchSection(end, backwards, visualmode) abort
+  if a:visualmode !=# ''
+    normal! gv
+  endif
+  let l:flags = a:backwards ? 'bsW' : 'sW'
+  if a:end
+    call search('^' . s:sectionend . (a:backwards ? '\n\_.\{-}\%#' : '$'), l:flags)
+  else
+    call search('^' . s:sectionstart . (a:backwards ? '\n\_.\{-}\%#' : '$'), l:flags)
+  endif
+endfunction
+
+noremap <buffer> <silent> ]] :<C-U>call <SID>SearchSection(0, 0, '')<CR>
+xnoremap <buffer> <silent> ]] :<C-U>call <SID>SearchSection(0, 0, visualmode())<CR>
+sunmap <buffer> ]]
+noremap <buffer> <silent> ][ :<C-U>call <SID>SearchSection(1, 0, '')<CR>
+xnoremap <buffer> <silent> ][ :<C-U>call <SID>SearchSection(1, 0, visualmode())<CR>
+sunmap <buffer> ][
+noremap <buffer> <silent> [[ :<C-U>call <SID>SearchSection(0, 1, '')<CR>
+xnoremap <buffer> <silent> [[ :<C-U>call <SID>SearchSection(0, 1, visualmode())<CR>
+sunmap <buffer> [[
+noremap <buffer> <silent> [] :<C-U>call <SID>SearchSection(1, 1, '')<CR>
+xnoremap <buffer> <silent> [] :<C-U>call <SID>SearchSection(1, 1, visualmode())<CR>
+sunmap <buffer> []
+
+let b:undo_ftplugin .= ' | silent! execute "unmap <buffer> ]]"'
+                   \ . ' | silent! execute "unmap <buffer> ]["'
+                   \ . ' | silent! execute "unmap <buffer> [["'
+                   \ . ' | silent! execute "unmap <buffer> []"'
+
+" Browse dialog filter on Windows (see ":help browsefilter")
+if has('gui_win32') && !exists('b:browsefilter')
+  let b:browsefilter = "J Script Files (*.ijs)\t*.ijs\n"
+                   \ . "All Files (*.*)\t*.*\n"
+  let b:undo_ftplugin .= ' | unlet! b:browsefilter'
+endif
+
+" Enhanced "%" matching (see ":help matchit")
+if exists('loaded_matchit') && !exists('b:match_words')
+  let b:match_ignorecase = 0
+  let b:match_words = '^\%(\s*Note\|.\{-}\<\%([0-4]\|13\|noun\|adverb\|conjunction\|verb\|monad\|dyad\)\s\+\%(\:\s*0\|def\s\+0\|define\)\)\>:^\s*\:\s*$:^\s*)\s*$'
+                  \ . ',\<\%(for\%(_\a\k*\)\=\|if\|select\|try\|whil\%(e\|st\)\)\.:\<\%(case\|catch[dt]\=\|else\%(if\)\=\|fcase\)\.:\<end\.'
+  let b:undo_ftplugin .= ' | unlet! b:match_ignorecase b:match_words'
+endif
+
+let &cpo = s:save_cpo
+unlet s:save_cpo

runtime/ftplugin/jproperties.vim

@@ -0,0 +1,15 @@
+" Vim filetype plugin
+" Language:	Java properties file
+" Maintainer:	David Bürgin <676c7473@gmail.com>
+" Last Change:	2013-11-19
+
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+setlocal formatoptions-=t
+setlocal comments=:#,:!
+setlocal commentstring=#\ %s
+
+let b:undo_ftplugin = "setl cms< com< fo<"

runtime/ftplugin/json.vim

@@ -0,0 +1,17 @@
+" Vim filetype plugin
+" Language:		JSON
+" Maintainer:		David Barnett <daviebdawg+vim@gmail.com>
+" Last Change:		2014 Jul 16
+
+if exists('b:did_ftplugin')
+  finish
+endif
+let b:did_ftplugin = 1
+
+let b:undo_ftplugin = 'setlocal formatoptions< comments< commentstring<'
+
+setlocal formatoptions-=t
+
+" JSON has no comments.
+setlocal comments=
+setlocal commentstring=

runtime/ftplugin/kconfig.vim

@@ -1,6 +1,10 @@
 " Vim filetype plugin file
-" Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2008-07-09
+" Vim syntax file
+" Maintainer:           Christian Brabandt <cb@256bit.org>
+" Previous Maintainer:  Nikolai Weibull <now@bitwi.se>
+" Latest Revision:      2015-05-29
+" License:              Vim (see :h license)
+" Repository:		https://github.com/chrisbra/vim-kconfig
 
 if exists("b:did_ftplugin")
   finish
@@ -14,5 +18,10 @@ let b:undo_ftplugin = "setl com< cms< fo<"
 
 setlocal comments=:# commentstring=#\ %s formatoptions-=t formatoptions+=croql
 
+" For matchit.vim
+if exists("loaded_matchit")
+  let b:match_words = '^\<menu\>:\<endmenu\>,^\<if\>:\<endif\>,^\<choice\>:\<endchoice\>'
+endif
+
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/ftplugin/less.vim

@@ -0,0 +1,20 @@
+" Vim filetype plugin
+" Language:	less
+" Maintainer:	Alessandro Vioni <jenoma@gmail.com>
+" URL: https://github.com/genoma/vim-less
+" Last Change:	2014 November 24
+
+" Only do this when not done yet for this buffer
+if exists("b:did_ftplugin")
+  finish
+endif
+let b:did_ftplugin = 1
+
+let b:undo_ftplugin = "setl cms< def< inc< inex< ofu< sua<"
+
+setlocal formatoptions-=t formatoptions+=croql
+
+setlocal comments=:// commentstring=//\ %s
+
+setlocal omnifunc=csscomplete#CompleteCSS
+setlocal suffixesadd=.less

runtime/ftplugin/man.vim

@@ -1,7 +1,7 @@
 " Vim filetype plugin file
 " Language:	man
 " Maintainer:	SungHyun Nam <goweol@gmail.com>
-" Last Change:	2013 Jul 17
+" Last Change:	2014 Dec 29
 
 " To make the ":Man" command available before editing a manual page, source
 " this script from your startup vimrc file.
@@ -63,7 +63,9 @@ endtry
 func <SID>PreGetPage(cnt)
   if a:cnt == 0
     let old_isk = &iskeyword
-    setl iskeyword+=(,)
+    if &ft == 'man'
+      setl iskeyword+=(,)
+    endif
     let str = expand("<cword>")
     let &l:iskeyword = old_isk
     let page = substitute(str, '(*\(\k\+\).*', '\1', '')
@@ -157,10 +159,10 @@ func <SID>GetPage(...)
   silent exec "r!/usr/bin/man ".s:GetCmdArg(sect, page)." | col -b"
   " Remove blank lines from top and bottom.
   while getline(1) =~ '^\s*$'
-    silent norm ggdd
+    silent keepj norm ggdd
   endwhile
   while getline('$') =~ '^\s*$'
-    silent norm Gdd
+    silent keepj norm Gdd
   endwhile
   1
   setl ft=man nomod