Problem: Some tests have a one or three second wait.
Solution: Reset the 'showmode' option. Use a test time of one to disable
sleep after an error or warning message.
Problem: Visual block insertion does not insert in all lines.
Solution: Don't bail out of insert too early. Add a test. (Christian
Brabandt, closes#1290)
Problem: If a wide character doesn't fit at the end of the screen line, and
the line doesn't fit on the screen, then the cursor position may
be wrong. (anliting)
Solution: Don't skip over wide character. (Christian Brabandt, closes#1408)
Problem: Cannot access the arguments of the current function in debug mode.
(Luc Hermitte)
Solution: use get_funccal(). (Lemonboy, closes#1432, closes#1352)
Problem: When concealing is active and the screen is resized in the GUI it
is not immediately redrawn.
Solution: Use update_prepare() and update_finish() from
update_single_line().
Problem: The return value of mode() does not indicate that completion is
active in Replace and Insert mode. (Zhen-Huan (Kenny) Hu)
Solution: Add "c" or "x" for two kinds of completion. (Yegappan Lakshmanan,
closes#1397) Test some more modes.
Problem: When doing a Visual selection and using "I" to go to insert mode,
CTRL-O needs to be used twice to go to Normal mode. (Coacher)
Solution: Check for the return value of edit(). (Christian Brabandt,
closes#1290)
Problem: On MS-Windows setting an environment variable with multi-byte
strings does not work well.
Solution: Use wputenv when possible. (Taro Muraoka, Ken Takata)
Problem: When checking for CTRL-C typed the GUI may detect a screen resize
and redraw the screen, causing trouble.
Solution: Set updating_screen in ui_breakcheck().
Problem: When update_single_line() is called recursively, or another screen
update happens while it is busy, errors may occur.
Solution: Check and update updating_screen. (Christian Brabandt)
Problem: May get ml_get error when :tcldo deletes lines or switches to
another buffer. (Nikolai Pavlov, closes#1421)
Solution: Check the buffer and line every time.
Problem: May get ml_get error when :rubydo deletes lines or switches to
another buffer. (Nikolai Pavlov, issue #1421)
Solution: Check the buffer and line every time.
Problem: May get ml_get error when :perldo deletes lines or switches to
another buffer. (Nikolai Pavlov, issue #1421)
Solution: Check the buffer and line every time.
Problem: May get ml_get error when :luado deletes lines or switches to
another buffer. (Nikolai Pavlov, issue #1421)
Solution: Check the buffer and line every time.
Problem: May get ml_get error when :pydo deletes lines or switches to
another buffer. (Nikolai Pavlov, issue #1421)
Solution: Check the buffer and line every time.
Problem: When calling setpos() with a buffer argument it often is ignored.
(Matthew Malcomson)
Solution: Make the buffer argument work for all marks local to a buffer.
(neovim #5713) Add more tests.
Problem: When using an assert function one can either specify a message or
get a message about what failed, not both.
Solution: Concatenate the error with the message.
Problem: When creating a session when winminheight is 2 or larger and
loading that session gives an error.
Solution: Also set winminheight before setting winheight to 1. (Rafael
Bodill, neovim #5717)
Problem: Characters below 256 that are not one byte are not always
recognized as word characters.
Solution: Make vim_iswordc() and vim_iswordp() work the same way. Add a test
for this. (Ozaki Kiichi)
Problem: It is not so easy to write a script that works with both Python 2
and Python 3, even when the Python code works with both.
Solution: Add 'pyxversion', :pyx, etc. (Marc Weber, Ken Takata)
Problem: When virtcol() gets a column that is not the first byte of a
multi-byte character the result is unpredictable. (Christian
Ludwig)
Solution: Correct the column to the first byte of a multi-byte character.
Change the utf-8 test to new style.
Problem: When two submits happen quick after each other, the tests for the
first one may error out.
Solution: Use a git depth of 10 instead of 1. (Christian Brabandt)
Problem: Under some circumstances, one needs to type Ctrl-N or Ctrl-P twice
to have a menu entry selected. (Lifepillar)
Solution: call ins_compl_free(). (Christian Brabandt, closes#1411)
Problem: When the user sets t_BE empty after startup to disable bracketed
paste, this has no direct effect.
Solution: When t_BE is made empty write t_BD. When t_BE is made non-empty
write the new value.
Problem: When making a character lower case with tolower() changes the byte
cound, it is not made lower case.
Solution: Add strlow_save(). (Dominique Pelle, closes#1406)
Problem: Completion of user defined functions is not covered by tests.
Solution: Add tests. Also test various errors of user-defined commands.
(Dominique Pelle, closes#1413)
Problem: Vim defines a mch_memmove() function but it doesn't work, thus is
always unused.
Solution: Remove the mch_memmove implementation. (suggested by Dominique
Pelle)
Problem: The address sanitizer sometimes finds errors, but it needs to be
run manually.
Solution: Add an environment to Travis with clang and the address sanitizer.
(Christian Brabandt) Also include changes only on github.
Problem: When setting wildoptions=tagfile the completion context is not set
correctly. (desjardins)
Solution: Check for EXPAND_TAGS_LISTFILES. (Christian Brabandt, closes#1399)
Problem: Gcc complains that a variable may be used uninitialized. Confusion
between variable and label name. (John Marriott)
Solution: Initialize it. Rename end to end_lnum.
Problem: When several lines are visually selected and one of them is short,
using put may cause a crash. (Axel Bender)
Solution: Check for a short line. (Christian Brabandt)
Problem: Pasting in Insert mode does not work when bracketed paste is used
and 'esckeys' is off.
Solution: When 'esckeys' is off disable bracketed paste in Insert mode.
Problem: When using bracketed paste line breaks are not respected.
Solution: Turn CR characters into a line break if the text is being
inserted. (closes#1404)
Problem: When pasting test in an xterm on the command line it is surrounded
by <PasteStart> and <PasteEnd>. (Johannes Kaltenbach)
Solution: Add missing changes.
Problem: Crash when 'fileformat' is forced to "dos" and the first line in
the file is empty and does not have a CR character.
Solution: Don't check for CR before the start of the buffer.
Problem: The test for patch 8.0.0224 misses the CR characters and passes
even without the fix. (Christian Brabandt)
Solution: Use double quotes and \<CR>.
Problem: When a block is visually selected and put is used on the end of
the selection only one line is changed.
Solution: Check for the end properly. (Christian Brabandt, neovim issue
5781)
Problem: When 'fileformats' is changed in a BufReadPre auto command, it
does not take effect in readfile(). (Gary Johnson)
Solution: Check the value of 'fileformats' after executing auto commands.
(Christian Brabandt)
Problem: Coverity gets confused by the flags passed to find_tags() and
warnts for an uninitialized variable.
Solution: Disallow using cscope and help tags at the same time.
Problem: When a multi-byte character ends in a zero byte, putting blockwise
text puts it before the character instead of after it.
Solution: Use int instead of char for the character under the cursor.
(Luchr, closes#1403) Add a test.
Problem: Completion for :match does not show "none" and other missing
highlight names.
Solution: Skip over cleared entries before checking the index to be at the
end.
Problem: Ubsan reports errors for integer overflow.
Solution: Define macros for minimum and maximum values. Select an
expression based on the value. (Mike Williams)
Problem: The buffer used to store a key name theoreticaly could be too
small. (Coverity)
Solution: Count all possible modifier characters. Add a check for the
length just in case.
Problem: When using :substitute with the "c" flag and 'cursorbind' is set
the cursor is not updated in other windows.
Solution: Call do_check_cursorbind(). (Masanori Misono)
Problem: Internally used commands for CTRL-Z and mouse click end up in
history. (Matthew Malcomson)
Solution: Use do_cmdline_cmd() instead of stuffing them in the readahead
buffer. (James McCoy, closes#1395)
Problem: Warning for an unused parameter when the libcall feature is
disabled. Warning for a function type cast when compiling with
-pedantic.
Solution: Add UNUSED. Use a different type cast. (Damien Molinier)
Problem: Some syntax arguments take effect even after "if 0". (Taylor
Venable)
Solution: Properly skip the syntax statements. Make "syn case" and "syn
conceal" report the current state. Fix that "syn clear" didn't
reset the conceal flag. Add tests for :syntax skipping properly.
Problem: The test for :profile is slow and does not work on MS-Windows.
Solution: Use the "-es" argument. (Dominique Pelle) Swap single and double
quotes for system()
Problem: Jumping to a tag that is a static item in the current file fails.
(Kazunobu Kuriyama)
Solution: Make sure the first byte of the tag key is not NUL. (Suggested by
James McCoy, closes#1387)
Problem: Some systems do not have ruby_sysinit(), causing the build to
fail.
Solution: Clean up how ruby_sysinit() and NtInitialize() are used. (Taro
Muraoka)
Problem: Detecting duplicate tags uses a slow linear search.
Solution: Use a much faster hash table solution. (James McCoy, closes#1046)
But don't add hi_keylen, it makes hash tables 50% bigger.
Problem: Using NOT_VALID for redraw_later() to update the cursor
line/column highlighting is not efficient.
Solution: Call validate_cursor() when 'cul' or 'cuc' is set.
Problem: When in Ex mode and an error is caught by try-catch, Vim still
exits with a non-zero exit code.
Solution: Don't set ex_exitval when inside a try-catch. (partly by Christian
Brabandt)
Problem: When 'cursorbind' and 'cursorline' are set, but 'cursorcolumn' is
not, then the cursor line highlighting is not updated. (Hirohito
Higashi)
Solution: Call redraw_later() with NOT_VALID.
Problem: When 'cursorbind' and 'cursorcolumn' are both on, the column
highlignt in non-current windows is wrong.
Solution: Add validate_cursor(). (Masanori Misono, closes#1372)
Problem: Error E937 is used both for duplicate key in JSON and for trying
to delete a buffer that is in use.
Solution: Rename the JSON error to E938. (Norio Takagi, closes#1376)
Problem: 'formatprg' is a global option but the value may depend on the
type of buffer. (Sung Pae)
Solution: Make 'formatprg' global-local. (closes#1380)
Problem: When opening a buffer on a directory and inside a try/catch then
the BufEnter event is not triggered.
Solution: Return NOTDONE from readfile() for a directory and deal with the
three possible return values. (Justin M. Keyes, closes#1375,
closes#1353)
Problem: Setting language in gvim on MS-Windows does not work when
libintl.dll is dynamically linked with msvcrt.dll.
Solution: Use putenv() from libintl as well. (Ken Takata, closes#1082)
Problem: For completion "locale -a" is executed on MS-Windows, even though
it most likely won't work.
Solution: Skip executing "locale -a" on MS-Windows. (Ken Takata)
Problem: When compiling with EBCDIC defined the build fails. (Yaroslav
Kuzmin)
Solution: Move sortFunctions() to the right file. Avoid warning for
redefining __SUSV3.
Problem: The command selected in the command line window is not executed.
(Andrey Starodubtsev)
Solution: Save and restore the command line at a lower level. (closes#1370)
Problem: str2nr() and str2float() do not always work with negative values.
Solution: Be more flexible about handling signs. (LemonBoy, closes#1332)
Add more tests.
Problem: JSON with a duplicate key gives an internal error. (Lcd)
Solution: Give a normal error. Avoid an error when parsing JSON from a
remote client fails.
Problem: Using a NULL pointer when using feedkeys() to trigger drawing a
tabline.
Solution: Skip drawing a tabline if TabPageIdxs is NULL. (Dominique Pelle)
Also fix recursing into getcmdline() from the cmd window.
Problem: On MS-Windows some float functions return a different value when
passed unusual values. strtod() doesn't work for "inf" and "nan".
Solution: Accept both results. Fix str2float() for MS-Windows. Also
reorder assert function arguments.
Problem: When sorting zero elements a NULL pointer is passed to qsort(),
which ubsan warns for.
Solution: Don't call qsort() if there are no elements. (Dominique Pelle)
Problem: To pass buffer content to system() and systemlist() one has to
first create a string or list.
Solution: Allow passing a buffer number. (LemonBoy, closes#1240)
Problem: When the pattern of :filter does not have a separator then
completion of the command fails.
Solution: Skip over the pattern. (Ozaki Kiichi, clodes #1299)
Problem: ":earlier" and ":later" do not work after startup or reading the
undo file.
Solution: Use absolute time stamps instead of relative to the Vim start
time. (Christian Brabandt, Pavel Juhas, closes#1300, closes
#1254)
Problem: When a C preprocessor statement has two line continuations the
following line does not have the right indent. (Ken Takata)
Solution: Add the indent of the previous continuation line. (Hirohito
Higashi)
Problem: When using 'termguicolors' on MS-Windows the RGB definition causes
the colors to be wrong.
Solution: Undefined RGB and use our own. (Gabriel Barta)
Problem: Pasting inserted text in Visual mode does not work properly.
(Matthew Malcomson)
Solution: Stop Visual mode before stuffing the inserted text. (Christian
Brabandt, from neovim #5709)
Problem: When 'maxfuncdepth' is set above 200 the nesting is limited to
200. (Brett Stahlman)
Solution: Allow for Ex command recursion depending on 'maxfuncdepth'.
Problem: When using indent folding and changing indent the wrong fold is
opened. (Jonathan Fudger)
Solution: Open the fold under the cursor a bit later. (Christian Brabandt)
Problem: An address relative to the current line, ":.,+3y", does not work
properly on a closed fold. (Efraim Yawitz)
Solution: Correct for including the closed fold. (Christian Brabandt)
Problem: Cancelling completion still inserts text when formatting is done
for 'textwidth'. (lacygoill)
Solution: Don't format when CTRL-E was typed. (Hirohito Higashi,
closes#1312)
Problem: Display problem with 'foldcolumn' and a wide character.
(esiegerman)
Solution: Don't use "extra" but an allocated buffer. (Christian Brabandt,
closes#1310)
Problem: When reading English help and using CTRl-] the language from
'helplang' is used.
Solution: Make help tag jumps keep the language. (Tatsuki, test by Hirohito
Higashi, closes#1249)
Problem: MS-Windows: message box to prompt for saving changes may appear on
the wrong monitor.
Solution: Adjust the CenterWindow function. (Ken Takata)
Problem: When reading channel output in a timer, messages may go missing.
(Skywind)
Solution: Add the "drop" option. Write error messages in the channel log.
Don't have ch_canread() check for the channel being open.
Problem: When using ch_read() with zero timeout, can't tell the difference
between reading an empty line and nothing available.
Solution: Add ch_canread().
Problem: Popup menu always appears above the cursor when it is in the lower
half of the screen. (Matt Gardner)
Solution: Compute the available space better. (Hirohito Higashi,
closes#1241)
Problem: When a channel callback consumes a lot of time Vim becomes
unresponsive. (skywind)
Solution: Bail out of checking channel readahead after 100 msec.
Problem: When the input or output is not a tty Vim appears to hang.
Solution: Add the --ttyfail argument. Also add the "ttyin" and "ttyout"
features to be able to check in Vim script.
Problem: C indenting does not support nested namespaces that C++ 17 has.
Solution: Add check that passes double colon inside a name. (Pauli, closes
#1214)
Problem: Test_help_complete sometimes fails in MS-Windows console.
Solution: Use getcompletion() instead of feedkeys() and command line
completion. (Hirohito Higashi)
Problem: Test_help_complete sometimes fails in MS-Windows console.
Solution: Use getcompletion() instead of feedkeys() and command line
completion. (Hirohito Higashi)
Problem: When the channel callback gets job info the job may already have
been deleted. (lifepillar)
Solution: Do not delete the job when the channel is still useful. (ichizok,
closes#1242, closes#1245)
Problem: Cannot make Vim fail on an internal error.
Solution: Add IEMSG() and IEMSG2(). (Domenique Pelle) Avoid reporting an
internal error without mentioning where.
Problem: Exit value from a shell command is wrong. (Hexchain Tong)
Solution: Do not check for ended jobs while waiting for a shell command.
(ichizok, closes#1196)
Problem: Checking did_throw after executing autocommands is wrong. (Daniel
Hahler)
Solution: Call aborting() instead, and only when autocommands were executed.
Problem: when calling an operator function when 'linebreak' is set, it is
internally reset before calling the operator function.
Solution: Restore 'linebreak' before calling op_function(). (Christian
Brabandt)
Problem: When using an Ex command for 'keywordprg' it is escaped as with a
shell command. (Romain Lafourcade)
Solution: Escape for an Ex command. (closes#1175)
Problem: On Windows job_stop() stops cmd.exe, not the processes it runs.
(Linwei)
Solution: Iterate over all processes and terminate the one where the parent
is the job process. Now only when there is no job object.
(Yasuhiro Matsumoto, closes#1203)
Problem: An exiting job is detected with a large latency.
Solution: Check for pending job more often. (Ozaki Kiichi) Change the
double loop in mch_inchar() into one.
Problem: When a match ends in part of concealed text highlighting, it might
mess up concealing by resetting prev_syntax_id.
Solution: Do not reset prev_syntax_id and add a test to verify. (Christian
Brabandt, closes#1092)
Problem: On Windows job_stop() stops cmd.exe, not the processes it runs.
(Linwei)
Solution: Iterate over all processes and terminate the one where the parent
is the job process. (Yasuhiro Matsumoto, closes#1184)
Problem: When using Insert mode completion with 'completeopt' containing
"noinsert" with CTRL-N the change is not saved for undo. (Tommy
Allen)
Solution: Call stop_arrow() before inserting for any key.
Problem: When using Insert mode completion with 'completeopt' containing
"noinsert" change is not saved for undo. (Tommy Allen)
Solution: Call stop_arrow() before inserting for pressing Enter.
Problem: When using Insert mode completion but not actually inserting
anything an undo item is still created. (Tommy Allen)
Solution: Do not call stop_arrow() when not inserting anything.
Problem: When Vim 8 reads an old viminfo and exits, the next time marks are
not read from viminfo. (Ned Batchelder)
Solution: Set a mark when it wasn't set before, even when the timestamp is
zero. (closes#1170)
Problem: Order of matches for 'omnifunc' is messed up. (Danny Su)
Solution: Do not set compl_curr_match when called from complete_check().
(closes#1168)
Problem: Code for MS-Windows is complicated because of the exceptions for
old systems.
Solution: Drop support for MS-Windows older than Windows XP. (Ken Takata)
Problem: A channel is closed when reading on stderr or stdout fails, but
there may still be something to read on another part.
Solution: Turn ch_to_be_closed into a bitfield. (Ozaki Kiichi)
Problem: If a channel in NL mode is missing the NL at the end the remaining
characters are dropped.
Solution: When the channel is closed use the remaining text. (Ozaki Kiichi)
Problem: In the GUI when redrawing the cursor it may be on the second half
of a double byte character.
Solution: Correct the cursor column. (Yasuhiro Matsumoto)
Problem: When using ":sleep" channel input is not handled.
Solution: When there is a channel check for input also when not in raw mode.
Check every 100 msec.
Problem: Cannot get the number of the current quickfix or location list.
Solution: Use the current list if "nr" in "what" is zero. (Yegappan
Lakshmanan) Remove debug command from test.
Problem: Can't tell which part of a channel has "buffered" status.
Solution: Add an optional argument to ch_status(). Let ch_info() also
return "buffered" for out_status and err_status.
Problem: ":lb" is interpreted as ":lbottom" while the documentation says it
means ":lbuffer".
Solution: Adjust the order of the commands. (haya14busa, closes#1093)
Problem: A string argument for function() that is not a function name
results in an error message with NULL. (Christian Brabandt)
Solution: Use the argument for the error message.
Problem: getwinvar() returns wrong Value of boolean and number options,
especially non big endian systems. (James McCoy)
Solution: Cast the pointer to long or int. (closes#1060)
Problem: Illegal memory access with ":1@". (Dominique Pelle)
Solution: Correct cursor column after setting the line number. Also avoid
calling end_visual_mode() when not in Visual mode.
Problem: Regexp fails to match when using "\>\)\?". (Ramel)
Solution: When a state is already in the list, but addstate_here() is used
and the existing state comes later, add the new state anyway.
Problem: The example that explains nested backreferences does not work
properly with the new regexp engine. (Harm te Hennepe)
Solution: Also save the end position when adding a state. (closes#990)
Problem: Crash when closing a buffer while Visual mode is active.
(Dominique Pelle)
Solution: Adjust the position before computing the number of lines.
When closing the current buffer stop Visual mode.
Problem: Autocommand test fails when run directly, passes when run as part
of test_alot.
Solution: Add command to make the cursor move. Close a tab page.
Problem: For MinGW RUBY_API_VER_LONG isn't set correctly. Many default
version numbers are outdated.
Solution: Set RUBY_API_VER_LONG to RUBY_VER_LONG. Use latest stable releases
for defaults. (Ken Takata)
Problem: The "Reading from channel output..." message can be unwanted.
Appending to a buffer leaves an empty first line behind.
Solution: Add the "out_msg" and "err_msg" options. Writing the first line
overwrites the first, empty line.
Problem: Crash when stop_timer() is called in a callback of a callback.
Vim hangs when the timer callback uses too much time.
Solution: Set tr_id to -1 when a timer is to be deleted. Don't keep calling
callbacks forever. (Ozaki Kiichi)
Problem: Using CTRL-X CTRL-V to complete a command line from Insert mode
does not work after entering an expression on the command line.
Solution: Don't use "ccline" when not actually using a command line. (test
by Hirohito Higashi)
Problem: Crash when editing a new buffer and BufUnload autocommand wipes
out the new buffer. (Norio Takagi)
Solution: Don't allow wiping out this buffer. (partly by Hirohito Higashi)
Move old style test13 into test_autocmd. Avoid ml_get error when
editing a file.
Problem: When a test is commented out we forget about it.
Solution: Let a test throw an exception with "Skipped" and list skipped test
functions. (Christian Brabandt)
Problem: Redraw problem when using 'incsearch'.
Solution: Save the current view when deleting characters. (Christian
Brabandt) Fix that the '" mark is set in the wrong position. Don't
change the search start when using BS.
Problem: No way for a system wide vimrc to stop loading defaults.vim.
(Christian Hesse)
Solution: Bail out of defaults.vim if skip_defaults_vim was set.
Problem: Crash when autocommand moves to another tab. (Dominique Pelle)
Solution: When navigating to another window halfway the :edit command go
back to the right window.
Problem: Crash when doing tabnext in a BufUnload autocmd. (Dominique Pelle)
Solution: When detecting that the tab page changed, don't just abort but
delete the window where w_buffer is NULL.
Problem: In a timer callback the timer itself can't be found or stopped.
(Thinca)
Solution: Do not remove the timer from the list, remember whether it was
freed.
Problem: Default interface versions for MS-Windows are outdated.
Solution: Use Active Perl 5.24, Python 3.5.2. Could only make it work with
Ruby 1.9.2.
Problem: MS-Windows: some files remain after testing.
Solution: Close the channel output file. Wait for the file handle to be
closed before deleting the file.
Problem: Get warning for deleting autocommand group when the autocommand
using the group is scheduled for deletion. (Pavol Juhas)
Solution: Check for deleted autocommand.
Problem: QuickFixCmdPre and QuickFixCmdPost autocommands are not always
triggered.
Solution: Also trigger on ":expr", ":cbuffer", etc. (Yegappan Lakshmanan)
Problem: When starting a job that reads from a buffer and reaching the end,
the job hangs.
Solution: Close the pipe or socket when all lines were read.
Problem: Sign test fails on MS-Windows when using the distributed zip
archives.
Solution: Create dummy files instead of relying on files in the pixmaps
directory.
Problem: When installing and $DESTDIR is set the icons probably won't be
installed.
Solution: Create the icon directories if $DESTDIR is not empty. (Danek
Duvall)
Problem: The tee program isn't included. Makefile contains build
instructions that don't work.
Solution: Update the Filelist and build instructions. Remove build
instructions for DOS and old Windows. Add the tee program.
Problem: When a child process is very fast waiting 10 msec for it is
noticeable. (Ramel Eshed)
Solution: Start waiting for 1 msec and gradually increase.
Problem: Starting diff mode with the cursor in the last line might end up
only showing one closed fold. (John Beckett)
Solution: Scroll the window to show the same relative cursor position.
Problem: Command line completion on "find **/filename" drops sub-directory.
Solution: Handle this case separately. (Harm te Hennepe, closes#932, closes
#939)
Problem: getwininfo() and getbufinfo() are inefficient.
Solution: Do not make a copy of all window/buffer-local options. Make it
possible to get them with gettabwinvar() or getbufvar().
Problem: Using 'hlsearch' highlighting instead of matchpos if there is no
search match.
Solution: Pass NULL as last item to next_search_hl() when searching for
'hlsearch' match. (Shane Harper, closes#1013)
Problem: printf() test fails on Windows. "-inf" is not used.
Solution: Check for Windows-specific values for "nan". Add sign to "inf"
when appropriate.
Problem: :filter does not work for many commands. Can only get matching
messages.
Solution: Make :filter work for :command, :map, :list, :number and :print.
Make ":filter!" show non-matching lines.
Problem: Fail to read register content from viminfo if it is 438 characters
long. (John Chen)
Solution: Adjust the check for line wrapping. (closes#1010)
Problem: The script that checks translations can't handle plurals.
Solution: Check for plural msgid and msgstr entries. Leave the cursor on
the first error.
Problem: When cancelling the :ptjump prompt a preview window is opened for
a following command.
Solution: Reset g_do_tagpreview. (Hirohito Higashi) Add a test. Avoid that
the test runner gets stuck in trying to close a window.
Problem: Adding pattern to ":oldfiles" is not a generic solution.
Solution: Add the ":filter /pat/ cmd" command modifier. Only works for some
commands right now.
Problem: Warning for assigning negative value to unsigned. (Danek Duvall)
Solution: Make cterm_normal_fg_gui_color and _bg_ guicolor_T, cast to long_u
only when an unsigned is needed.
Problem: With SGR mouse reporting (suckless terminal) the mouse release and
scroll up/down is confused.
Solution: Don't see a release as a scroll up/down. (Ralph Eastwood)
Problem: The 'langnoremap' option leads to double negatives. And it does
not work for the last character of a mapping.
Solution: Add 'langremap' with the opposite value. Keep 'langnoremap' for
backwards compatibility. Make it work for the last character of a
mapping. Make the test work.
Problem: There is no equivalent of 'smartcase' for a tag search.
Solution: Add value "followscs" and "smart" to 'tagcase'. (Christian
Brabandt, closes#712) Turn tagcase test into new style.
Problem: The field names used by getbufinfo(), gettabinfo() and
getwininfo() are not consistent.
Solution: Use bufnr, winnr and tabnr. (Yegappan Lakshmanan)
Problem: Sourcing a script where a character has 0x80 as a second byte does
not work. (Filipe L B Correia)
Solution: Turn 0x80 into K_SPECIAL KS_SPECIAL KE_FILLER. (Christian
Brabandt, closes#728) Add a test case.
Problem: printf() gives an error when the argument for %s is not a string.
(Ozaki Kiichi)
Solution: Behave like invoking string() on the argument. (Ken Takata)
Problem: When using matchaddpos() a character after the end of the line can
be highlighted.
Solution: Only highlight existing characters. (Hirohito Higashi)
Problem: It's not easy to find out if a window is a quickfix or location
list window.
Solution: Add "loclist" and "quickfix" entries to the dict returnec by
getwininfo(). (Yegappan Lakshmanan)
Problem: A font that uses ligatures messes up the screen display.
Solution: Put spaces between characters when building the glyph table.
(based on a patch from Manuel Schiller)
Problem: Mark " is not set when closing a window in another tab. (Guraga)
Solution: Check all tabs for the window to be valid. (based on patch by
Hirohito Higashi, closes#974)
Problem: Cannot map <M-">. (Stephen Riehm)
Solution: Solve the memory access problem in another way. (Dominique Pelle)
Allow for using <M-\"> in a string.
Problem: It is not easy to get information about buffers, windows and
tabpages.
Solution: Add getbufinfo(), getwininfo() and gettabinfo(). (Yegappan
Lakshmanan)
Problem: In the GUI the cursor is hidden when redrawing any window,
causing flicker.
Solution: Only undraw the cursor when updating the window it's in.
Problem: When startup test fails it's not easy to find out why.
GUI test fails with Gnome.
Solution: Add the help entry matches to a list an assert that.
Set $HOME for Gnome to create .gnome2 directory.
Problem: Cannot detect encoding in a fifo.
Solution: Extend the stdin way of detecting encoding to fifo. Add a test
for detecting encoding on stdin and fifo. (Ken Takata)
Problem: It is not possible to use plugins in an "after" directory to tune
the behavior of a package.
Solution: First load plugins from non-after directories, then packages and
finally plugins in after directories.
Reset 'loadplugins' before executing --cmd arguments.
Problem: Test_job_start_fails() is expected to report memory leaks, making
it hard to see other leaks in test_partial.
Solution: Move Test_job_start_fails() to a separate test file.
Problem: Not enough testing for popup menu. CTRL-E does not always work
properly.
Solution: Add more tests. When using CTRL-E check if the popup menu is
visible. (Christian Brabandt)
Problem: A funccal is garbage collected while it can still be used.
Solution: Set copyID in all referenced functions. Do not list lambda
functions with ":function".
Problem: Leaking memory when redefining a function.
Solution: Don't increment the function reference count when it's found by
name. Don't remove the wrong function from the hashtab. More
reference counting fixes.
Problem: Using function() with a name will find another function when it is
redefined.
Solution: Add funcref(). Refer to lambda using a partial. Fix several
reference counting issues.
Problem: The short form of ":noswapfile" is ":noswap" instead of ":now".
(Kent Sibilev)
Solution: Only require three characters. Add a test for the short forms.
Problem: User defined functions can't be a closure.
Solution: Add the "closure" argument. Allow using :unlet on a bound
variable. (Yasuhiro Matsumoto, Ken Takata)
Problem: Deleting an augroup that still has autocmds does not give a
warning. The next defined augroup takes its place.
Solution: Give a warning and prevent the index being used for another group
name.
Problem: Loading defaults.vim with -C argument.
Solution: Don't load the defaults script with -C argument. Test sourcing
the defaults script. Set 'display' to "truncate".
Problem: getcompletion(.., 'dir') returns a match with trailing "*" when
there are no matches. (Chdiza)
Solution: Return an empty list when there are no matches. Add a trailing
slash to directories. (Yegappan Lakshmanan) Add tests for no
matches. (closes#947)
Problem: When there is an CmdUndefined autocmd then the error for a missing
command is E464 instead of E492. (Manuel Ortega)
Solution: Don't let the pointer be NULL.
Problem: Setting 'display' to "lastline" is a drastic change, while
omitting it results in lots of "@" lines.
Solution: Add "truncate" to show "@@@" for a truncated line.
Problem: "cgn" and "dgn" do not work correctly with a single character
match and the replacement includes the searched pattern. (John
Beckett)
Solution: If the match is found in the wrong column try in the next column.
Turn the test into new style. (Christian Brabandt)
Problem: The color allocation in X11 is overly complicated.
Solution: Remove find_closest_color(), XAllocColor() already does this.
(Kazunobu Kuriyama)
Problem: Using submatch() in a lambda passed to substitute() is verbose.
Solution: Use a static list and pass it as an optional argument to the
function. Fix memory leak.
Problem: Using the system default encoding makes tests unpredictable.
Solution: Always use utf-8 or latin1 in the new style tests. Remove setting
encoding and scriptencoding where it is not needed.
Problem: Coverity complains about not restoring a value.
Solution: Restore the value, although it's not really needed. Change return
to jump to cleanup, might leak memory.
Problem: Not all arguments of trunc_string() are tested. Memory access
error when running the message tests.
Solution: Add another test case. (Yegappan Lakshmanan) Make it easy to run
unittests with valgrind. Fix the access error.
Problem: Compiler warning for char/char_u conversion. (Tony Mechelynck)
Inefficient code.
Solution: Use more lines to fill with spaces. (Nikolai Pavlov) Add type cast.
Problem: Coverage report is messed up by the unittests.
Solution: Add a separate test target for script tests. Use that when
collecting coverage information.
Problem: filter() and map() either require a string or defining a function.
Solution: Support lambda, a short way to define a function that evaluates an
expression. (Yasuhiro Matsumoto, Ken Takata)
Problem: GTK: display updating is not done properly and can be slow.
Solution: Use gdk_display_flush() instead of gdk_display_sync(). Don't call
gdk_window_process_updates(). (Kazunobu Kuriyama)
Problem: The list_lbr_utf8 test fails if ~/.vim/syntax/c.vim sets
'textwidth' to a non-zero value. (Oyvind A. Holm)
Solution: Add a setup.vim file that sets 'runtimepath' and $HOME to a safe
value. (partly by Christian Brabandt, closes#912)
Problem: The cursor blinking stops or is irregular when receiving date over
a channel and writing it in a buffer, and when updating the status
line. (Ramel Eshed)
Solution: Make it a bit better by flushing GUI output. Don't redraw the
cursor after updating the screen if the blink state is off.
Problem: buflist_findname_stat() may find a dummy buffer.
Solution: Set the BF_DUMMY flag after loading a dummy buffer. Start
finding buffers from the end of the list.
Problem: When there are many errors adding them to the quickfix list takes
a long time.
Solution: Add BLN_NOOPT. Don't call buf_valid() in buf_copy_options().
Remember the last file name used. When going through the buffer
list start from the end of the list. Only call buf_valid() when
autocommands were executed.
Problem: When a file gets a name when writing it 'acd' is not effective.
(Dan Church)
Solution: Invoke DO_AUTOCHDIR after writing the file. (Allen Haim, closes
#777, closes#803) Add test_autochdir() to enable 'acd' before
"starting" is reset.
Problem: Crash when using tabnext in BufUnload autocmd. (Norio Takagi)
Solution: First check that the current buffer is the right one. (Hirohito
Higashi)
Problem: Still cursor flickering when a callback updates the screen. (David
Samvelyan)
Solution: Put the cursor in the right position after updating the screen.
- if [ "$COVERAGE" = "yes" ]; then pip install --user cpp-coveralls; fi
# needed for https support for coveralls
# building cffi only works with gcc, not with clang
- if [ "$COVERAGE" = "yes" ]; then CC=gcc pip install --user pyopenssl ndg-httpsclient pyasn1; fi
# Lua is not installed on Travis OSX
- if [ "$TRAVIS_OS_NAME" = "osx" ]; then brew install lua; export LUA_PREFIX=/usr/local; fi
# Start virtual framebuffer to be able to test the GUI. Does not work on OS X.
before_script:
- if [ "$TRAVIS_OS_NAME" = "linux" ]; then export DISPLAY=:99.0 && sh -e /etc/init.d/xvfb start && sleep 3; fi
script:
- NPROC=$(getconf _NPROCESSORS_ONLN)
- if [ "$CHECK_AUTOCONF" = "yes" -a "$CC" = "gcc" ]; then make -C src autoconf; fi
- if [ "x$SHADOWOPT" != x ]; then make -C src shadow; fi && (cd ${SRCDIR} && ./configure --with-features=$FEATURES $CONFOPT --enable-fail-if-missing && make -j$NPROC)
- ${SRCDIR}/vim --version
- make $SHADOWOPT test
- if [ "x$SHADOWOPT" != x ]; then make -C src shadow; fi
- (cd ${SRCDIR} && ./configure --with-features=$FEATURES $CONFOPT --enable-fail-if-missing && if [ "$BUILD" = "yes" ]; then make -j$NPROC; fi)
- if [ "$BUILD" = "yes" ]; then ${SRCDIR}/vim --version; fi
- make $SHADOWOPT $TEST
after_success:
- if [ x"$COVERAGE" = "xyes" ]; then ~/.local/bin/coveralls -b $SRCDIR -x .xs -e ${SRCDIR}/xxd -e ${SRCDIR}/if_perl.c --encodings utf-8 latin-1 EUC-KR; fi
- if [ "$COVERAGE" = "yes" ]; then ~/.local/bin/coveralls -b $SRCDIR -x .xs -e ${SRCDIR}/xxd -e ${SRCDIR}/if_perl.c --encodings utf-8 latin-1 EUC-KR; fi
*os_mac.txt* For Vim version 7.4. Last change: 2006 Apr 30
*os_mac.txt* For Vim version 8.0. Last change: 2006 Apr 30
VIM REFERENCE MANUAL by Bram Moolenaar et al.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
