patch 7.4.1886

Problem:    When waiting for a character is interrupted by receiving channel
            data and the first character of a mapping was typed, the mapping
            times out. (Ramel Eshed)
Solution:   When dealing with channel data don't return from mch_inchar().

.gitignore

@@ -3,6 +3,8 @@
 src/vim
 src/xxd/xxd
 src/auto/if_perl.c
+src/auto/gui_gtk_gresources.c
+src/auto/gui_gtk_gresources.h
 src/tags
 
 # We do need src/auto/configure.
@@ -35,6 +37,7 @@ src/pathdef.c
 src/Obj*/pathdef.c
 gvimext.dll
 gvimext.lib
+runtime/doc/uganda.nsis.txt
 
 # Borland C++
 bcc.cfg
@@ -72,4 +75,7 @@ src/testdir/test*.out
 src/testdir/test*.failed
 src/testdir/test.log
 src/testdir/dostmp/*
+src/testdir/messages
+src/testdir/viminfo
 src/memfile_test
+src/json_test

.travis.yml

@@ -0,0 +1,45 @@
+language: c
+
+compiler:
+  - clang
+  - gcc
+
+env:
+  - COVERAGE=yes CFLAGS=--coverage LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src
+    "CONFOPT='--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp'"
+    CHECK_AUTOCONF=yes
+  - COVERAGE=no FEATURES=normal CONFOPT= SHADOWOPT="-C src/shadow" SRCDIR=./src/shadow CHECK_AUTOCONF=no
+  - COVERAGE=no FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+  - COVERAGE=no FEATURES=tiny  CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+
+sudo: false
+
+branches:
+  except:
+    - /^v[0-9]/
+
+addons:
+  apt:
+    packages:
+      - autoconf
+      - lcov
+      - libperl-dev
+      - python-dev
+      - python3-dev
+      - liblua5.1-0-dev
+      - lua5.1
+
+before_install:
+  - pip install --user cpp-coveralls
+
+script:
+  - NPROC=$(getconf _NPROCESSORS_ONLN)
+  - if [ "$CHECK_AUTOCONF" = "yes" -a "$CC" = "gcc" ]; then make -C src autoconf; fi
+  - if [ "x$SHADOWOPT" != x ]; then make -C src shadow; fi && (cd ${SRCDIR} && ./configure --with-features=$FEATURES $CONFOPT --enable-fail-if-missing && make -j$NPROC)
+  - ${SRCDIR}/vim --version
+  - make $SHADOWOPT test
+
+after_success:
+  - if [ x"$COVERAGE" = "xyes" ]; then ~/.local/bin/coveralls -b $SRCDIR -x .xs -e ${SRCDIR}/xxd -e ${SRCDIR}/if_perl.c --encodings utf-8 latin-1 EUC-KR; fi
+
+# vim:set sts=2 sw=2 tw=0 et:

Filelist

@@ -4,12 +4,17 @@
 # source files for all source archives
 SRC_ALL =	\
 		.hgignore \
+		.travis.yml \
+		appveyor.yml \
+		src/appveyor.bat \
 		src/README.txt \
+		src/alloc.h \
 		src/arabic.c \
 		src/arabic.h \
 		src/ascii.h \
 		src/blowfish.c \
 		src/buffer.c \
+		src/channel.c \
 		src/charset.c \
 		src/crypt.c \
 		src/crypt_zip.c \
@@ -36,6 +41,8 @@ SRC_ALL =	\
 		src/gui_beval.h \
 		src/hardcopy.c \
 		src/hashtab.c \
+		src/json.c \
+		src/json_test.c \
 		src/keymap.h \
 		src/macros.h \
 		src/main.c \
@@ -83,8 +90,11 @@ SRC_ALL =	\
 		src/main.aap \
 		src/testdir/main.aap \
 		src/testdir/README.txt \
+		src/testdir/Make_all.mak \
 		src/testdir/*.in \
+		src/testdir/*.py \
 		src/testdir/sautest/autoload/*.vim \
+		src/testdir/runtest.vim \
 		src/testdir/test[0-9]*.ok \
 		src/testdir/test[0-9]*a.ok \
 		src/testdir/test_[a-z]*.ok \
@@ -108,6 +118,7 @@ SRC_ALL =	\
 		src/proto.h \
 		src/proto/blowfish.pro \
 		src/proto/buffer.pro \
+		src/proto/channel.pro \
 		src/proto/charset.pro \
 		src/proto/crypt.pro \
 		src/proto/crypt_zip.pro \
@@ -127,6 +138,7 @@ SRC_ALL =	\
 		src/proto/gui_beval.pro \
 		src/proto/hardcopy.pro \
 		src/proto/hashtab.pro \
+		src/proto/json.pro \
 		src/proto/main.pro \
 		src/proto/mark.pro \
 		src/proto/mbyte.pro \
@@ -166,6 +178,7 @@ SRC_UNIX =	\
 		README_src.txt \
 		configure \
 		pixmaps/*.xpm \
+		pixmaps/*.png \
 		pixmaps/gen-inline-pixbufs.sh \
 		pixmaps/stock_icons.h \
 		src/INSTALL \
@@ -186,6 +199,7 @@ SRC_UNIX =	\
 		src/gui_gtk_f.c \
 		src/gui_gtk_f.h \
 		src/gui_gtk_x11.c \
+		src/gui_gtk_res.xml \
 		src/gui_motif.c \
 		src/gui_xmdlg.c \
 		src/gui_xmebw.c \
@@ -211,6 +225,7 @@ SRC_UNIX =	\
 		src/proto/gui_athena.pro \
 		src/proto/gui_gtk.pro \
 		src/proto/gui_gtk_x11.pro \
+		src/proto/gui_gtk_gresources.pro \
 		src/proto/gui_motif.pro \
 		src/proto/gui_xmdlg.pro \
 		src/proto/gui_x11.pro \
@@ -247,7 +262,6 @@ SRC_DOS_UNIX =	\
 		src/if_python3.c \
 		src/if_py_both.h \
 		src/if_ruby.c \
-		src/if_sniff.h \
 		src/if_tcl.c \
 		src/proto/if_cscope.pro \
 		src/proto/if_lua.pro \
@@ -277,16 +291,13 @@ SRC_DOS =	\
 		src/GvimExt/uninst.bat \
 		README_srcdos.txt \
 		src/INSTALLpc.txt \
-		src/Make_bc3.mak \
 		src/Make_bc5.mak \
 		src/Make_cyg.mak \
 		src/Make_cyg_ming.mak \
-		src/Make_djg.mak \
 		src/Make_ivc.mak \
 		src/Make_dvc.mak \
 		src/Make_ming.mak \
 		src/Make_mvc.mak \
-		src/Make_w16.mak \
 		src/bigvim.bat \
 		src/bigvim64.bat \
 		src/msvcsetup.bat \
@@ -300,30 +311,21 @@ SRC_DOS =	\
 		src/glbl_ime.h \
 		src/gui_dwrite.cpp \
 		src/gui_dwrite.h \
-		src/gui_w16.c \
 		src/gui_w32.c \
-		src/gui_w48.c \
-		src/guiw16rc.h \
 		src/gui_w32_rc.h \
 		src/if_ole.cpp \
 		src/if_ole.h \
 		src/if_ole.idl \
+		src/if_perl_msvc/stdbool.h \
 		src/iid_ole.c \
 		src/os_dos.h \
-		src/os_msdos.c \
-		src/os_msdos.h \
 		src/os_w32dll.c \
 		src/os_w32exe.c \
-		src/os_win16.c \
 		src/os_win32.c \
 		src/os_mswin.c \
-		src/os_win16.h \
 		src/os_win32.h \
-		src/proto/gui_w16.pro \
 		src/proto/gui_w32.pro \
 		src/proto/if_ole.pro \
-		src/proto/os_msdos.pro \
-		src/proto/os_win16.pro \
 		src/proto/os_win32.pro \
 		src/proto/os_mswin.pro \
 		src/testdir/Make_dos.mak \
@@ -334,19 +336,14 @@ SRC_DOS =	\
 		src/vim.rc \
 		src/vimio.h \
 		src/gvim.exe.mnf \
-		src/vim16.def \
-		src/vim16.rc \
 		src/vimrun.c \
-		src/vimtbar.h \
 		src/xpm_w32.c \
 		src/xpm_w32.h \
-		src/xxd/Make_bc3.mak \
 		src/xxd/Make_bc5.mak \
-		src/xxd/Make_cyg.mak \
-		src/xxd/Make_djg.mak \
 		src/xxd/Make_ming.mak \
 		src/xxd/Make_mvc.mak \
 		nsis/gvim.nsi \
+		nsis/gvim_version.nsh \
 		nsis/README.txt \
 		uninstal.txt \
 		src/VisVim/Commands.cpp \
@@ -375,10 +372,8 @@ SRC_DOS_BIN =	\
 		src/VisVim/Res/*.bmp \
 		src/tearoff.bmp \
 		src/tools.bmp \
-		src/tools16.bmp \
 		src/vim*.ico \
 		src/vim.tlb \
-		src/vimtbar.lib \
 		src/xpm/COPYRIGHT \
 		src/xpm/README.txt \
 		src/xpm/include/*.h \
@@ -386,7 +381,6 @@ SRC_DOS_BIN =	\
 		src/xpm/x64/lib/libXpm.lib \
 		src/xpm/x86/lib/libXpm.a \
 		src/xpm/x86/lib/libXpm.lib \
-		src/vimtbar.dll \
 		nsis/icons/*.bmp \
 		nsis/icons/*.ico \
 
@@ -437,15 +431,6 @@ SRC_VMS =	\
 		src/xxd/Make_vms.mms \
 		vimtutor.com \
 
-# source files for OS/2 (in the extra archive)
-SRC_OS2 =	\
-		src/Make_os2.mak \
-		src/os_os2_cfg.h \
-		src/testdir/Make_os2.mak \
-		src/testdir/todos.vim \
-		src/testdir/os2.vim \
-		src/xxd/Make_os2.mak \
-
 # source files for QNX (in the extra archive)
 SRC_QNX =	\
 		src/os_qnx.c \
@@ -462,12 +447,10 @@ SRC_EXTRA =	\
 		$(SRC_DOS) \
 		$(SRC_DOS_BIN) \
 		$(SRC_MAC) \
-		$(SRC_OS2) \
 		$(SRC_QNX) \
 		$(SRC_VMS) \
 		README_os390.txt \
 		src/Make_mint.mak \
-		src/if_sniff.c \
 		src/infplist.xml \
 		src/link.390 \
 		src/os_beos.c \
@@ -497,7 +480,6 @@ RT_ALL =	\
 		runtime/ftoff.vim \
 		runtime/gvimrc_example.vim \
 		runtime/macros/README.txt \
-		runtime/macros/dvorak \
 		runtime/macros/editexisting.vim \
 		runtime/macros/hanoi/click.me \
 		runtime/macros/hanoi/hanoi.vim \
@@ -509,7 +491,6 @@ RT_ALL =	\
 		runtime/macros/life/click.me \
 		runtime/macros/life/life.vim \
 		runtime/macros/matchit.vim \
-		runtime/macros/matchit.txt \
 		runtime/macros/maze/README.txt \
 		runtime/macros/maze/[mM]akefile \
 		runtime/macros/maze/main.aap \
@@ -539,6 +520,16 @@ RT_ALL =	\
 		runtime/tutor/tutor \
 		runtime/tutor/tutor.vim \
 		runtime/vimrc_example.vim \
+		runtime/pack/dist/opt/dvorak/plugin/dvorak.vim \
+		runtime/pack/dist/opt/dvorak/dvorak/enable.vim \
+		runtime/pack/dist/opt/dvorak/dvorak/disable.vim \
+		runtime/pack/dist/opt/editexisting/plugin/editexisting.vim \
+		runtime/pack/dist/opt/justify/plugin/justify.vim \
+		runtime/pack/dist/opt/matchit/plugin/matchit.vim \
+		runtime/pack/dist/opt/matchit/doc/matchit.txt \
+		runtime/pack/dist/opt/matchit/doc/tags \
+		runtime/pack/dist/opt/shellmenu/plugin/shellmenu.vim \
+		runtime/pack/dist/opt/swapmouse/plugin/swapmouse.vim \
 
 # runtime files for all distributions without CR-NL translation
 RT_ALL_BIN =	\
@@ -582,6 +573,8 @@ RT_UNIX =	\
 		runtime/vim32x32.xpm \
 		runtime/vim48x48.png \
 		runtime/vim48x48.xpm \
+		runtime/gvim.desktop \
+		runtime/vim.desktop \
 
 # Unix and DOS runtime without CR-LF translation
 RT_UNIX_DOS_BIN =	\
@@ -617,7 +610,6 @@ RT_AMI =	\
 		README.txt.info \
 		README_ami.txt \
 		README_ami.txt.info \
-		libs/arp.library \
 		runtime/doc.info \
 		runtime/doc/*.info \
 		runtime/icons/README.txt \
@@ -702,8 +694,37 @@ EXTRA =		\
 		runtime/vimlogo.xpm \
 		src/swis.s \
 		src/tee/Makefile \
+		src/tee/Make_mvc.mak \
 		src/tee/tee.c \
-		csdpmi4b.zip \
+
+# files in READMEdir that are included from the top dir
+IN_README_DIR = \
+		README.txt.info \
+		README_ami.txt \
+		README_ami.txt.info \
+		README_amibin.txt \
+		README_amibin.txt.info \
+		README_amisrc.txt \
+		README_amisrc.txt.info \
+		README_bindos.txt \
+		README_dos.txt \
+		README_extra.txt \
+		README_mac.txt \
+		README_ole.txt \
+		README_os2.txt \
+		README_os390.txt \
+		README_src.txt \
+		README_srcdos.txt \
+		README_unix.txt \
+		README_vms.txt \
+		README_w32s.txt \
+		Contents \
+		Contents.info \
+		Vim.info \
+		Xxd.info \
+		runtime.info \
+		src.info \
+		vimdir.info \
 
 # generic language files
 LANG_GEN = \

Makefile

@@ -63,9 +63,6 @@ all install uninstall tools config configure reconfig proto depend lint tags typ
 # amirt		vim##rt.tgz		runtime for Amiga
 # amibin	vim##bin.tgz		binary for Amiga
 #
-# os2bin	vim##os2.zip		binary for OS/2
-#					(use RT from dosrt)
-#
 # farsi		farsi##.zip		Farsi fonts
 #
 #    All output files are created in the "dist" directory.  Existing files are
@@ -89,9 +86,9 @@ MINOR = 4
 #
 # - Update Vim version number.  For a test version in: src/version.h, Contents,
 #   MAJOR/MINOR above, VIMMAJOR and VIMMINOR in src/Makefile, README*.txt,
-#   runtime/doc/*.txt and nsis/gvim.nsi. Other things in README_os2.txt.  For a
-#   minor/major version: src/GvimExt/GvimExt.reg, src/vim.def, src/vim16.def,
-#   src/gvim.exe.mnf.
+#   runtime/doc/*.txt and nsis/gvim.nsi.
+#   For a minor/major version: src/GvimExt/GvimExt.reg, src/vim.def,
+#   src/vim16.def, src/gvim.exe.mnf.
 # - Compile Vim with GTK, Perl, Python, Python3, TCL, Ruby, MZscheme, Lua (if
 #   you can make it all work), Cscope and "huge" features.  Exclude workshop
 #   and SNiFF.
@@ -132,36 +129,61 @@ MINOR = 4
 #   flag).
 # - "make amirt", "make amibin".
 #
-# PC:
+# MS-Windows:
 # - Run make on Unix to update the ".mo" files.
-# - "make dossrc" and "make dosrt".  Unpack the archives on a PC.
-# Win32 console version:
-# - Set environment for Visual C++ 2008, e.g.: "msvc2008.bat"  Or:
-#   "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat".
+# - Get libintl-8.dll and libiconv-2.dll. E.g. from
+#   https://mlocati.github.io/gettext-iconv-windows/ .
+#   Put them in the top directory, "make dosrt" uses them.
+# - > make dossrc
+#   > make dosrt
+#   Unpack dist/vim##rt.zip and dist/vim##src.zip on an MS-Windows PC.
+# Win32 console version build:
+# - Set environment for Visual C++ 2008, e.g.:
+#   > src/msvc2008.bat
+#   Or: 
+#   > C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat
 #   Or, when using the Visual C++ Toolkit 2003: "msvcsetup.bat" (adjust the
 #   paths when necessary).
 #   For Windows 98/ME the 2003 version is required, but then the executable
 #   won't work on Windows 7 and 64 bit systems.
-# - "nmake -f Make_mvc.mak"  (use the same path as for vcvars32.bat)
-# - "rm testdir/*.out", "nmake -f Make_mvc.mak test" and check the output.
+# - > cd src
+#   > nmake -f Make_mvc.mak
+# - Run the tests:
+#   > rm testdir/*.out testdir/*.res
+#   > nmake -f Make_mvc.mak test
+#   - check the output.
 # - Rename vim.exe to vimw32.exe, xxd/xxd.exe to xxdw32.exe.
 # - Rename vim.pdb to vimw32.pdb.
 # - Rename install.exe to installw32.exe and uninstal.exe to uninstalw32.exe.
-# Win32 GUI version:
-# - "nmake -f Make_mvc.mak GUI=yes"
+# Win32 GUI version build:
+# - > cd src
+#   > nmake -f Make_mvc.mak GUI=yes
+# - Run the tests:
+#   > rm testdir/*.out testdir/*.res
+#   > nmake -f Make_mvc.mak testgvim
+#   - check the output.
 # - move "gvim.exe" to here (otherwise the OLE version will overwrite it).
 # - Move gvim.pdb to here.
-# - Delete vimrun.exe, install.exe and uninstal.exe.
 # - Copy "GvimExt/gvimext.dll" to here.
+# - Delete vimrun.exe, install.exe and uninstal.exe.
 # Win32 GUI version with OLE, PERL, TCL, PYTHON and dynamic IME:
-# - Run src/bigvim.bat ("nmake -f Make_mvc.mak GUI=yes OLE=yes IME=yes ...)
+# - Install the interfaces you want, see src/INSTALLpc.txt
+# - Build:
+#   > cd src
+#   Adjust bigvim.bat to match the version of each interface you want.
+#   > bigvim.bat
+# - Run the tests:
+#   > rm testdir/*.out testdir/*.res
+#   > nmake -f Make_mvc.mak testgvim
+#   - check the output.
 # - Rename "gvim.exe" to "gvim_ole.exe".
 # - Rename gvim.pdb to "gvim_ole.pdb".
 # - Delete install.exe and uninstal.exe.
 # Create the archives:
 # - Copy all the "*.exe" files to where this Makefile is.
 # - Copy all the "*.pdb" files to where this Makefile is.
-# - "make dosbin".
+# - in this directory:
+#   > make dosbin
 # NSIS self installing exe:
 # - To get NSIS see http://nsis.sourceforge.net
 # - Make sure gvim_ole.exe, vimw32.exe, installw32.exe,
@@ -173,38 +195,33 @@ MINOR = 4
 #   Note: VisVim needs to be build with MSVC 5, newer versions don't work.
 #   gvimext64.dll can be obtained from http://code.google.com/p/vim-win3264/
 #	It is part of vim72.zip as vim72/gvimext.dll.
-# - make sure there is a diff.exe two levels up
-# - go to ../nsis and do "makensis gvim.nsi" (takes a few minutes).
+# - Make sure there is a diff.exe two levels up (get it from a previous Vim
+#   version).
+# - go to ../nsis and do:
+#   > makensis gvim.nsi  (takes a few minutes).
 # - Copy gvim##.exe to the dist directory.
 #
 # 64 bit builds (these are not in the normal distribution, the 32 bit build
 # works just fine on 64 bit systems).
 # Like the console and GUI version, but first run vcvars64.bat or
 #   "..\VC\vcvarsall.bat x86_amd64".
-# - "nmake -f Make_mvc.mak"
-# - "nmake -f Make_mvc.mak GUI=yes"
-# Or run src/bigvim64.bat for an OLE version.
+# - Build the console version:
+#   > nmake -f Make_mvc.mak
+# - Build the GUI version:
+#   > nmake -f Make_mvc.mak GUI=yes
+# - Build the OLE version with interfaces:
+#   > bigvim64.bat
 #
-# OBSOLETE systems: You can build this if you have an appropriate system.
 #
-# 16 bit DOS version: (doesn't build anywhere)
-# - Set environment for compiling with Borland C++ 3.1.
-# - "bmake -f Make_bc3.mak BOR=E:\borlandc" (compiling xxd might fail, in that
-#   case set environment for compiling with Borland C++ 4.0 and do
-#   "make -f make_bc3.mak BOR=E:\BC4 xxd/xxd.exe").
-#   NOTE: this currently fails because Vim is too big.
-# - "make test" and check the output.
-# - Rename the executables to "vimd16.exe", "xxdd16.exe", "installd16.exe" and
-#   "uninstald16.exe".
+# OBSOLETE systems: You can build these if you have an appropriate system.
 #
-# 32 bit DOS version: (requires Windows XP or earlier)
-# - Set environment for compiling with DJGPP; "gmake -f Make_djg.mak".
-# - "rm testdir/*.out", "gmake -f Make_djg.mak test" and check the output for
-#   "ALL DONE".
-# - Rename the executables to "vimd32.exe", "xxdd32.exe", "installd32.exe" and
-#   "uninstald32.exe".
+# 16 bit DOS version: You need to get a very old version of Vim, for several
+# years even the tiny build is too big to fit in DOS memory.
 #
-# Win32s GUI version: (requires very old compiler)
+# 32 bit DOS version: Support was removed in 7.4.1399.  When syncing to before
+# that it probably won't build.
+#
+# Win32s GUI version: (requires a very old compiler)
 # - Set environment for Visual C++ 4.1 (requires a new console window):
 #   "vcvars32.bat" (use the path for VC 4.1 e:\msdev\bin)
 # - "nmake -f Make_mvc.mak GUI=yes INTL=no clean" (use the path for VC 4.1)
@@ -214,12 +231,9 @@ MINOR = 4
 # - Rename "uninstal.exe" to "uninstalw32.exe"
 # - The produced uninstalw32.exe and vimrun.exe are used.
 #
-# OS/2: (requires an OS/2 system)
-# - Unpack the Unix archive.
-# - "make -f Make_os2.mak".
-# - Rename the executables to vimos2.exe, xxdos2.exe and teeos2.exe and copy
-#   them to here.
-# - "make os2bin".
+# OS/2 support was removed in patch 7.4.1008.  If you want to give it a try
+# sync to before that and check the old version of this Makefile for
+# instructions.
 
 VIMVER	= vim-$(MAJOR).$(MINOR)
 VERSION = $(MAJOR)$(MINOR)
@@ -241,9 +255,13 @@ dist:
 	mkdir dist
 
 # Clean up some files to avoid they are included.
+# Copy README files to the top directory.
 prepare:
 	if test -f runtime/doc/uganda.nsis.txt; then \
 		rm runtime/doc/uganda.nsis.txt; fi
+	for name in $(IN_README_DIR); do \
+	  cp READMEdir/"$$name" .; \
+	  done
 
 # For the zip files we need to create a file with the comment line
 dist/comment:
@@ -257,7 +275,6 @@ COMMENT_GVIM = comment/$(VERSION)-bin-gvim
 COMMENT_OLE = comment/$(VERSION)-bin-ole
 COMMENT_W32S = comment/$(VERSION)-bin-w32s
 COMMENT_SRC = comment/$(VERSION)-src
-COMMENT_OS2 = comment/$(VERSION)-bin-os2
 COMMENT_HTML = comment/$(VERSION)-html
 COMMENT_FARSI = comment/$(VERSION)-farsi
 
@@ -285,9 +302,6 @@ dist/$(COMMENT_W32S): dist/comment
 dist/$(COMMENT_SRC): dist/comment
 	echo "Vim - Vi IMproved - v$(VDOT) sources for MS-DOS and MS-Windows" > dist/$(COMMENT_SRC)
 
-dist/$(COMMENT_OS2): dist/comment
-	echo "Vim - Vi IMproved - v$(VDOT) binaries + runtime files for OS/2" > dist/$(COMMENT_OS2)
-
 dist/$(COMMENT_HTML): dist/comment
 	echo "Vim - Vi IMproved - v$(VDOT) documentation in HTML" > dist/$(COMMENT_HTML)
 
@@ -312,6 +326,7 @@ unixall: dist prepare
 		$(EXTRA) \
 		$(LANG_SRC) \
 		| (cd dist/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
 # Need to use a "distclean" config.mk file
 # Note: this file is not included in the repository to avoid problems, but it's
 # OK to put it in the archive.
@@ -348,6 +363,7 @@ amirt: dist prepare
 		$(RT_NO_UNIX) \
 		$(RT_AMI_DOS) \
 		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
 	mv dist/Vim/$(VIMRTDIR)/vimdir.info dist/Vim.info
 	mv dist/Vim/$(VIMRTDIR)/runtime.info dist/Vim/$(VIMRTDIR).info
 	mv dist/Vim/$(VIMRTDIR)/runtime/* dist/Vim/$(VIMRTDIR)
@@ -368,6 +384,7 @@ amibin: dist prepare
 		Vim \
 		Xxd \
 		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
 	mv dist/Vim/$(VIMRTDIR)/vimdir.info dist/Vim.info
 	mv dist/Vim/$(VIMRTDIR)/runtime.info dist/Vim/$(VIMRTDIR).info
 	cd dist && tar cf vim$(VERSION)bin.tar Vim Vim.info
@@ -386,6 +403,7 @@ amisrc: dist prepare
 		$(SRC_AMI) \
 		$(SRC_AMI_DOS) \
 		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
 	mv dist/Vim/$(VIMRTDIR)/vimdir.info dist/Vim.info
 	mv dist/Vim/$(VIMRTDIR)/runtime.info dist/Vim/$(VIMRTDIR).info
 	cd dist && tar cf vim$(VERSION)src.tar Vim Vim.info
@@ -396,7 +414,9 @@ no_title.vim: Makefile
 	echo "set notitle noicon nocp nomodeline viminfo=" >no_title.vim
 
 # MS-DOS sources
-dossrc: dist no_title.vim dist/$(COMMENT_SRC) runtime/doc/uganda.nsis.txt
+dossrc: dist no_title.vim dist/$(COMMENT_SRC) \
+	runtime/doc/uganda.nsis.txt \
+	nsis/gvim_version.nsh
 	-rm -rf dist/vim$(VERSION)src.zip
 	-rm -rf dist/vim
 	mkdir dist/vim
@@ -407,10 +427,12 @@ dossrc: dist no_title.vim dist/$(COMMENT_SRC) runtime/doc/uganda.nsis.txt
 		$(SRC_AMI_DOS) \
 		$(SRC_DOS_UNIX) \
 		runtime/doc/uganda.nsis.txt \
+		nsis/gvim_version.nsh \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
 	mv dist/vim/$(VIMRTDIR)/runtime/* dist/vim/$(VIMRTDIR)
 	rmdir dist/vim/$(VIMRTDIR)/runtime
-	find dist/vim/$(VIMRTDIR) -type f -exec $(VIM) -e -X -u no_title.vim -c ":set tx|wq" {} \;
+	# This file needs to be in dos fileformat for NSIS.
+	$(VIM) -e -X -u no_title.vim -c ":set tx|wq" dist/vim/$(VIMRTDIR)/doc/uganda.nsis.txt
 	tar cf - \
 		$(SRC_DOS_BIN) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
@@ -419,12 +441,21 @@ dossrc: dist no_title.vim dist/$(COMMENT_SRC) runtime/doc/uganda.nsis.txt
 runtime/doc/uganda.nsis.txt: runtime/doc/uganda.txt
 	cd runtime/doc && $(MAKE) uganda.nsis.txt
 
-dosrt: dist dist/$(COMMENT_RT) dosrt_unix2dos
+nsis/gvim_version.nsh: Makefile
+	echo "# Generated from Makefile: define the version numbers" > $@
+	echo "!ifndef __GVIM_VER__NSH__"  >> $@
+	echo "!define __GVIM_VER__NSH__"  >> $@
+	echo "!define VER_MAJOR $(MAJOR)" >> $@
+	echo "!define VER_MINOR $(MINOR)" >> $@
+	echo "!endif" >> $@
+
+dosrt: dist dist/$(COMMENT_RT) dosrt_files
 	-rm -rf dist/vim$(VERSION)rt.zip
 	cd dist && zip -9 -rD -z vim$(VERSION)rt.zip vim <$(COMMENT_RT)
 
 # Split in two parts to avoid an "argument list too long" error.
-dosrt_unix2dos: dist prepare no_title.vim
+# We no longer convert the files from unix to dos fileformat.
+dosrt_files: dist prepare no_title.vim
 	-rm -rf dist/vim
 	mkdir dist/vim
 	mkdir dist/vim/$(VIMRTDIR)
@@ -440,13 +471,13 @@ dosrt_unix2dos: dist prepare no_title.vim
 		$(RT_AMI_DOS) \
 		$(LANG_GEN) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	find dist/vim/$(VIMRTDIR) -type f -exec $(VIM) -e -X -u no_title.vim -c ":set tx|wq" {} \;
 	tar cf - \
 		$(RT_UNIX_DOS_BIN) \
 		$(RT_ALL_BIN) \
 		$(RT_DOS_BIN) \
 		$(LANG_GEN_BIN) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
 	mv dist/vim/$(VIMRTDIR)/runtime/* dist/vim/$(VIMRTDIR)
 	rmdir dist/vim/$(VIMRTDIR)/runtime
 # Add the message translations.  Trick: skip ja.mo and use ja.sjis.mo instead.
@@ -460,12 +491,12 @@ dosrt_unix2dos: dist prepare no_title.vim
 		cp $$i dist/vim/$(VIMRTDIR)/lang/$$n/LC_MESSAGES/vim.mo; \
 	      fi \
 	    done
-	cp libintl.dll dist/vim/$(VIMRTDIR)/
+	cp libintl-8.dll dist/vim/$(VIMRTDIR)/
+	cp libiconv-2.dll dist/vim/$(VIMRTDIR)/
 
 
-# Convert runtime files from Unix fileformat to dos fileformat.
 # Used before uploading.  Don't delete the AAPDIR/sign files!
-runtime_unix2dos: dosrt_unix2dos
+runtime_unix2dos: dosrt_files
 	-rm -rf `find runtime/dos -type f -print | sed -e /AAPDIR/d`
 	cd dist/vim/$(VIMRTDIR); tar cf - * \
 		| (cd ../../../runtime/dos; tar xf -)
@@ -481,7 +512,7 @@ dosbin_gvim: dist no_title.vim dist/$(COMMENT_GVIM)
 	tar cf - \
 		$(BIN_DOS) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	find dist/vim/$(VIMRTDIR) -type f -exec $(VIM) -e -X -u no_title.vim -c ":set tx|wq" {} \;
+	-rm $(IN_README_DIR)
 	cp gvim.exe dist/vim/$(VIMRTDIR)/gvim.exe
 	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
 	cp vimrun.exe dist/vim/$(VIMRTDIR)/vimrun.exe
@@ -500,7 +531,6 @@ dosbin_w32: dist no_title.vim dist/$(COMMENT_W32)
 	tar cf - \
 		$(BIN_DOS) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	find dist/vim/$(VIMRTDIR) -type f -exec $(VIM) -e -X -u no_title.vim -c ":set tx|wq" {} \;
 	cp vimw32.exe dist/vim/$(VIMRTDIR)/vim.exe
 	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
 	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
@@ -517,7 +547,6 @@ dosbin_d32: dist no_title.vim dist/$(COMMENT_D32)
 	tar cf - \
 		$(BIN_DOS) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	find dist/vim/$(VIMRTDIR) -type f -exec $(VIM) -e -X -u no_title.vim -c ":set tx|wq" {} \;
 	cp vimd32.exe dist/vim/$(VIMRTDIR)/vim.exe
 	cp xxdd32.exe dist/vim/$(VIMRTDIR)/xxd.exe
 	cp installd32.exe dist/vim/$(VIMRTDIR)/install.exe
@@ -534,7 +563,6 @@ dosbin_d16: dist no_title.vim dist/$(COMMENT_D16)
 	tar cf - \
 		$(BIN_DOS) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	find dist/vim/$(VIMRTDIR) -type f -exec $(VIM) -e -X -u no_title.vim -c ":set tx|wq" {} \;
 	cp vimd16.exe dist/vim/$(VIMRTDIR)/vim.exe
 	cp xxdd16.exe dist/vim/$(VIMRTDIR)/xxd.exe
 	cp installd16.exe dist/vim/$(VIMRTDIR)/install.exe
@@ -550,7 +578,6 @@ dosbin_ole: dist no_title.vim dist/$(COMMENT_OLE)
 	tar cf - \
 		$(BIN_DOS) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	find dist/vim/$(VIMRTDIR) -type f -exec $(VIM) -e -X -u no_title.vim -c ":set tx|wq" {} \;
 	cp gvim_ole.exe dist/vim/$(VIMRTDIR)/gvim.exe
 	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
 	cp vimrun.exe dist/vim/$(VIMRTDIR)/vimrun.exe
@@ -572,7 +599,6 @@ dosbin_s: dist no_title.vim dist/$(COMMENT_W32S)
 	tar cf - \
 		$(BIN_DOS) \
 		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	find dist/vim/$(VIMRTDIR) -type f -exec $(VIM) -e -X -u no_title.vim -c ":set tx|wq" {} \;
 	cp gvim_w32s.exe dist/vim/$(VIMRTDIR)/gvim.exe
 	cp xxdd32.exe dist/vim/$(VIMRTDIR)/xxd.exe
 	cp README_w32s.txt dist/vim/$(VIMRTDIR)
@@ -580,21 +606,6 @@ dosbin_s: dist no_title.vim dist/$(COMMENT_W32S)
 	cp uninstalw32.exe dist/vim/$(VIMRTDIR)/uninstal.exe
 	cd dist && zip -9 -rD -z gvim$(VERSION)_s.zip vim <$(COMMENT_W32S)
 
-os2bin: dist no_title.vim dist/$(COMMENT_OS2)
-	-rm -rf dist/vim$(VERSION)os2.zip
-	-rm -rf dist/vim
-	mkdir dist/vim
-	mkdir dist/vim/$(VIMRTDIR)
-	tar cf - \
-		$(BIN_OS2) \
-		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	find dist/vim/$(VIMRTDIR) -type f -exec $(VIM) -e -X -u no_title.vim -c ":set tx|wq" {} \;
-	cp vimos2.exe dist/vim/$(VIMRTDIR)/vim.exe
-	cp xxdos2.exe dist/vim/$(VIMRTDIR)/xxd.exe
-	cp teeos2.exe dist/vim/$(VIMRTDIR)/tee.exe
-	cp emx.dll emxlibcs.dll dist/vim/$(VIMRTDIR)
-	cd dist && zip -9 -rD -z vim$(VERSION)os2.zip vim <$(COMMENT_OS2)
-
 html: dist dist/$(COMMENT_HTML)
 	-rm -rf dist/vim$(VERSION)html.zip
 	cd runtime/doc && zip -9 -z ../../dist/vim$(VERSION)html.zip *.html <../../dist/$(COMMENT_HTML)

README.md

@@ -1,26 +1,37 @@
 `README.md` for version 7.4 of Vim: Vi IMproved.
+[![Build Status](https://travis-ci.org/vim/vim.svg?branch=master)](https://travis-ci.org/vim/vim)
+[![Coverage Status](https://coveralls.io/repos/vim/vim/badge.svg?branch=master&service=github)](https://coveralls.io/github/vim/vim?branch=master)
+[![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim)
+[![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim)
 
 
-## What is VIM ##
+## What is Vim? ##
 
-Vim is an almost compatible version of the UNIX editor Vi.  Many new features
-have been added: multi-level undo, syntax highlighting, command line history,
-on-line help, spell checking, filename completion, block operations, etc.
-There is also a Graphical User Interface (GUI) available.  See
-`runtime/doc/vi_diff.txt` for differences with Vi.
+Vim is a greatly improved version of the good old UNIX editor Vi.  Many new
+features have been added: multi-level undo, syntax highlighting, command line
+history, on-line help, spell checking, filename completion, block operations,
+script language, etc.  There is also a Graphical User Interface (GUI)
+available.  Still, Vi compatibility is maintained, those who have Vi "in the
+fingers" will feel at home.  See `runtime/doc/vi_diff.txt` for differences with
+Vi.
 
 This editor is very useful for editing programs and other plain text files.
 All commands are given with normal keyboard characters, so those who can type
 with ten fingers can work very fast.  Additionally, function keys can be
-defined by the user, and the mouse can be used.
+mapped to commands by the user, and the mouse can be used.
 
-Vim runs under Amiga DOS, MS-DOS, MS-Windows (95, 98, Me, NT, 2000, XP, Vista,
-7), Atari MiNT, Macintosh, BeOS, VMS, RISC OS, OS/2 and almost all flavours of
-UNIX.  Porting to other systems should not be very difficult.
+Vim runs under MS-Windows (NT, 2000, XP, Vista, 7, 8, 10), Macintosh, VMS and
+almost all flavours of UNIX.  Porting to other systems should not be very
+difficult.  Older versions of Vim run on MS-DOS, MS-Windows 95/98/Me, Amiga
+DOS, Atari MiNT, BeOS, RISC OS and OS/2.  These are no longer maintained.
 
 
 ## Distribution ##
 
+You can often use your favorite package manager to install Vim.  On Mac and
+Linux a small version of Vim is pre-installed, you still need to install Vim
+if you want more features.
+
 There are separate distributions for Unix, PC, Amiga and some other systems.
 This `README.md` file comes with the runtime archive.  It includes the
 documentation, syntax files and other files that are used at runtime.  To run
@@ -29,10 +40,39 @@ Which one you need depends on the system you want to run it on and whether you
 want or must compile it yourself.  Check http://www.vim.org/download.php for
 an overview of currently available distributions.
 
+Some popular places to get the latest Vim:
+* Check out the git repository from [github](https://github.com/vim/vim).
+* Get the source code as an [archive](https://github.com/vim/vim/releases).
+* Get a Windows executable from the
+[vim-win32-installer](https://github.com/vim/vim-win32-installer/releases) repository.
+
+
+
+## Compiling ##
+
+If you obtained a binary distribution you don't need to compile Vim.  If you
+obtained a source distribution, all the stuff for compiling Vim is in the
+`src` directory.  See `src/INSTALL` for instructions.
+
+
+## Installation ##
+
+See one of these files for system-specific instructions.  Either in the
+READMEdir directory (in the repository) or the top directory (if you unpack an
+archive):
+
+	README_ami.txt		Amiga
+	README_unix.txt		Unix
+	README_dos.txt		MS-DOS and MS-Windows
+	README_mac.txt		Macintosh
+	README_vms.txt		VMS
+
+There are other `README_*.txt` files, depending on the distribution you used.
+
 
 ## Documentation ##
 
-The vim tutor is a one hour training course for beginners.  Mostly it can be
+The Vim tutor is a one hour training course for beginners.  Often it can be
 started as `vimtutor`.  See `:help tutor` for more information.
 
 The best is to use `:help` in Vim.  If you don't have an executable yet, read
@@ -68,25 +108,9 @@ For the most recent information about sponsoring look on the Vim web site:
 	http://www.vim.org/sponsor/
 
 
-## Compiling ##
+## Contributing ##
 
-If you obtained a binary distribution you don't need to compile Vim.  If you
-obtained a source distribution, all the stuff for compiling Vim is in the
-`src` directory.  See `src/INSTALL` for instructions.
-
-
-## Installation ##
-
-See one of these files for system-specific instructions:
-
-	README_ami.txt		Amiga
-	README_unix.txt		Unix
-	README_dos.txt		MS-DOS and MS-Windows
-	README_os2.txt		OS/2
-	README_mac.txt		Macintosh
-	README_vms.txt		VMS
-
-There are more `README_*.txt` files, depending on the distribution you used.
+If you would like to help making Vim better, see the [CONTRIBUTING.md](https://github.com/vim/vim/blob/master/CONTRIBUTING.md) file.
 
 
 ## Information ##

README.txt

@@ -1,26 +1,33 @@
 README.txt for version 7.4 of Vim: Vi IMproved.
 
 
-WHAT IS VIM
+WHAT IS VIM?
 
-Vim is an almost compatible version of the UNIX editor Vi.  Many new features
-have been added: multi-level undo, syntax highlighting, command line history,
-on-line help, spell checking, filename completion, block operations, etc.
-There is also a Graphical User Interface (GUI) available.  See
-"runtime/doc/vi_diff.txt" for differences with Vi.
+Vim is a greatly improved version of the good old UNIX editor Vi.  Many new
+features have been added: multi-level undo, syntax highlighting, command line
+history, on-line help, spell checking, filename completion, block operations,
+script language, etc.  There is also a Graphical User Interface (GUI)
+available.  Still, Vi compatibility is maintained, those who have Vi "in the
+fingers" will feel at home.  See "runtime/doc/vi_diff.txt" for differences with
+Vi.
 
 This editor is very useful for editing programs and other plain text files.
 All commands are given with normal keyboard characters, so those who can type
 with ten fingers can work very fast.  Additionally, function keys can be
-defined by the user, and the mouse can be used.
+mapped to commands by the user, and the mouse can be used.
 
-Vim runs under Amiga DOS, MS-DOS, MS-Windows (95, 98, Me, NT, 2000, XP, Vista,
-7), Atari MiNT, Macintosh, BeOS, VMS, RISC OS, OS/2 and almost all flavours of
-UNIX.  Porting to other systems should not be very difficult.
+Vim runs under MS-Windows (NT, 2000, XP, Vista, 7, 8, 10), Macintosh, VMS and
+almost all flavours of UNIX.  Porting to other systems should not be very
+difficult.  Older versions of Vim run on MS-DOS, MS-Windows 95/98/Me, Amiga
+DOS, Atari MiNT, BeOS, RISC OS and OS/2.  These are no longer maintained.
 
 
 DISTRIBUTION
 
+You can often use your favorite package manager to install Vim.  On Mac and
+Linux a small version of Vim is pre-installed, you still need to install Vim
+if you want more features.
+
 There are separate distributions for Unix, PC, Amiga and some other systems.
 This README.txt file comes with the runtime archive.  It includes the
 documentation, syntax files and other files that are used at runtime.  To run
@@ -29,10 +36,38 @@ Which one you need depends on the system you want to run it on and whether you
 want or must compile it yourself.  Check "http://www.vim.org/download.php" for
 an overview of currently available distributions.
 
+Some popular places to get the latest Vim:
+* Check out the git repository from github: https://github.com/vim/vim.
+* Get the source code as an archive: https://github.com/vim/vim/releases.
+* Get a Windows executable from the vim-win32-installer repository:
+  https://github.com/vim/vim-win32-installer/releases.
+
+
+COMPILING
+
+If you obtained a binary distribution you don't need to compile Vim.  If you
+obtained a source distribution, all the stuff for compiling Vim is in the
+"src" directory.  See src/INSTALL for instructions.
+
+
+INSTALLATION
+
+See one of these files for system-specific instructions.  Either in the
+READMEdir directory (in the repository) or the top directory (if you unpack an
+archive):
+
+README_ami.txt		Amiga
+README_unix.txt		Unix
+README_dos.txt		MS-DOS and MS-Windows
+README_mac.txt		Macintosh
+README_vms.txt		VMS
+
+There are more README_*.txt files, depending on the distribution you used.
+
 
 DOCUMENTATION
 
-The vim tutor is a one hour training course for beginners.  Mostly it can be
+The Vim tutor is a one hour training course for beginners.  Often it can be
 started as "vimtutor".  See ":help tutor" for more information.
 
 The best is to use ":help" in Vim.  If you don't have an executable yet, read
@@ -69,24 +104,9 @@ For the most recent information about sponsoring look on the Vim web site:
 	http://www.vim.org/sponsor/
 
 
-COMPILING
+CONTRIBUTING
 
-If you obtained a binary distribution you don't need to compile Vim.  If you
-obtained a source distribution, all the stuff for compiling Vim is in the
-"src" directory.  See src/INSTALL for instructions.
-
-
-INSTALLATION
-
-See one of these files for system-specific instructions:
-README_ami.txt		Amiga
-README_unix.txt		Unix
-README_dos.txt		MS-DOS and MS-Windows
-README_os2.txt		OS/2
-README_mac.txt		Macintosh
-README_vms.txt		VMS
-
-There are more README_*.txt files, depending on the distribution you used.
+If you would like to help making Vim better, see the CONTRIBUTING.md file.
 
 
 INFORMATION

README_os2.txt

@@ -1,58 +0,0 @@
-README_os2.txt for version 7.4 of Vim: Vi IMproved.
-
-This file explains the installation of Vim on OS/2 systems.
-See "README.txt" for general information about Vim.
-
-
-NOTE: You will need two archives:
-  vim74rt.zip	contains the runtime files (same as for the PC version)
-  vim74os2.zip	contains the OS/2 executables
-
-1. Go to the directory where you want to put the Vim files.  Examples:
-	cd C:\
-	cd D:\editors
-
-2. Unpack the zip archives.  This will create a new directory "vim/vim74",
-   in which all the distributed Vim files are placed.  Since the directory
-   name includes the version number, it is unlikely that you overwrite
-   existing files.
-   Examples:
-	pkunzip -d vim74os2.zip
-	unzip vim74os2.zip
-
-   After you unpacked the files, you can still move the whole directory tree
-   to another location.
-
-3. Add the directory where vim.exe is to your path.  The simplest is to add a
-   line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim74
-	set path=%path%;D:\editors\vim\vim74
-
-That's it!
-
-
-Extra remarks:
-
-- To avoid confusion between distributed files of different versions and your
-  own modified vim scripts, it is recommended to use this directory layout:
-  ("C:\vim" is used here as the root, replace with the path you use)
-  Your own files:
-	C:\vim\_vimrc			Your personal vimrc.
-	C:\vim\_viminfo			Dynamic info for 'viminfo'.
-	C:\vim\...			Other files you made.
-  Distributed files:
-	C:\vim\vim74\vim.exe		The Vim version 7.4 executable.
-	C:\vim\vim74\doc\*.txt		The version 7.4 documentation files.
-	C:\vim\vim74\bugreport.vim	A Vim version 7.4 script.
-	C:\vim\vim74\...		Other version 7.4 distributed files.
-  In this case the $VIM environment variable would be set like this:
-	set VIM=C:\vim
-
-- You can put your Vim executable anywhere else.  If the executable is not
-  with the other distributed Vim files, you should set $VIM.  The simplest is
-  to add a line to your autoexec.bat.  Examples:
-	set VIM=c:\vim
-	set VIM=d:\editors\vim
-
-For further information, type this inside Vim:
-	:help os2

READMEdir/Contents

@@ -9,7 +9,7 @@ Vim		Vi IMproved.  A clone of the UNIX text editor Vi.  Very useful
 		messages, shows current file name in window title, on-line
 		help, rectangular cut/paste, etc., etc., etc...
 
-		Version 7.4.  Also runs under UNIX, MSDOS and other systems.
+		Version 7.4.  Also runs under UNIX, MS-Windows, Mac, etc.
 		vim74rt.tgz  contains the documentation and syntax files.
 		vim74bin.tgz contains the binaries.
 		vim74src.tgz contains the sources.
@@ -19,5 +19,5 @@ Vim		Vi IMproved.  A clone of the UNIX text editor Vi.  Very useful
 Xxd		Hex dumper and reader.  Can be used to view files as hex, edit
 		them and write them back.  Can also be used to patch files.
 
-		Version 1.8 (1997 May 22)
+		Version 1.10 (1997 May 22)
 		Author: Juergen Weigert

READMEdir/README_os2.txt

@@ -0,0 +1,5 @@
+README_os2.txt for version 7.4 of Vim: Vi IMproved.
+
+This file used to explain the installation of Vim on OS/2 systems.
+However, support for OS/2 has been removed in patch 7.4.1008.
+See "README.txt" for general information about Vim.

appveyor.yml

@@ -0,0 +1,34 @@
+version: "{build}"
+
+skip_tags: true
+
+environment:
+  matrix:
+    - FEATURE: HUGE
+    - FEATURE: NORMAL
+# disabled
+#    - FEATURE: TINY
+#    - FEATURE: SMALL
+#    - FEATURE: BIG
+
+matrix:
+  fast_finish: true
+
+before_build:
+  - '"C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd" /x64 /release'
+  # Work around for Python 2.7.11's bug
+  - reg copy HKLM\SOFTWARE\Python\PythonCore\2.7 HKLM\SOFTWARE\Python\PythonCore\2.7-32 /s /reg:32
+  - reg copy HKLM\SOFTWARE\Python\PythonCore\2.7 HKLM\SOFTWARE\Python\PythonCore\2.7-32 /s /reg:64
+
+build_script:
+  - src/appveyor.bat
+
+test_script:
+  - cd src/testdir
+    # Testing with MSVC gvim
+  - nmake -f Make_dos.mak VIMPROG=..\gvim
+  - nmake -f Make_dos.mak clean
+    # Testing with MingW console version
+  - nmake -f Make_dos.mak VIMPROG=..\vim
+
+# vim: sw=2 sts=2 et ts=2 sr

nsis/gvim.nsi

@@ -6,13 +6,19 @@
 # because uninstall deletes most files in $0.
 
 # Location of gvim_ole.exe, vimw32.exe, GvimExt/*, etc.
-!define VIMSRC "..\src"
+!ifndef VIMSRC
+  !define VIMSRC "..\src"
+!endif
 
 # Location of runtime files
-!define VIMRT ".."
+!ifndef VIMRT
+  !define VIMRT ".."
+!endif
 
 # Location of extra tools: diff.exe
-!define VIMTOOLS ..\..
+!ifndef VIMTOOLS
+  !define VIMTOOLS ..\..
+!endif
 
 # Comment the next line if you don't have UPX.
 # Get it at http://upx.sourceforge.net
@@ -21,8 +27,7 @@
 # comment the next line if you do not want to add Native Language Support
 !define HAVE_NLS
 
-!define VER_MAJOR 7
-!define VER_MINOR 4
+!include gvim_version.nsh	# for version number
 
 # ----------- No configurable settings below this line -----------
 
@@ -33,9 +38,10 @@
 Name "Vim ${VER_MAJOR}.${VER_MINOR}"
 OutFile gvim${VER_MAJOR}${VER_MINOR}.exe
 CRCCheck force
-SetCompressor lzma
+SetCompressor /SOLID lzma
 SetDatablockOptimize on
 RequestExecutionLevel highest
+XPStyle on
 
 ComponentText "This will install Vim ${VER_MAJOR}.${VER_MINOR} on your computer."
 DirText "Choose a directory to install Vim (should contain 'vim')"
@@ -56,9 +62,6 @@ LicenseData ${VIMRT}\doc\uganda.nsis.txt
   !packhdr temp.dat "upx --best --compress-icons=1 temp.dat"
 !endif
 
-SetCompressor /SOLID lzma
-XPStyle on
-
 # This adds '\vim' to the user choice automagically.  The actual value is
 # obtained below with ReadINIStr.
 InstallDir "$PROGRAMFILES\Vim"
@@ -212,6 +215,28 @@ Section "Vim executables and runtime files"
 	SetOutPath $0\macros
 	File ${VIMRT}\macros\*.*
 
+	SetOutPath $0\pack\dist\opt\dvorak\dvorak
+	File ${VIMRT}\pack\dist\opt\dvorak\dvorak\*.*
+	SetOutPath $0\pack\dist\opt\dvorak\plugin
+	File ${VIMRT}\pack\dist\opt\dvorak\plugin\*.*
+
+	SetOutPath $0\pack\dist\opt\editexisting\plugin
+	File ${VIMRT}\pack\dist\opt\editexisting\plugin\*.*
+
+	SetOutPath $0\pack\dist\opt\justify\plugin
+	File ${VIMRT}\pack\dist\opt\justify\plugin\*.*
+
+	SetOutPath $0\pack\dist\opt\matchit\doc
+	File ${VIMRT}\pack\dist\opt\matchit\doc\*.*
+	SetOutPath $0\pack\dist\opt\matchit\plugin
+	File ${VIMRT}\pack\dist\opt\matchit\plugin\*.*
+
+	SetOutPath $0\pack\dist\opt\shellmenu\plugin
+	File ${VIMRT}\pack\dist\opt\shellmenu\plugin\*.*
+
+	SetOutPath $0\pack\dist\opt\swapmouse\plugin
+	File ${VIMRT}\pack\dist\opt\swapmouse\plugin\*.*
+
 	SetOutPath $0\plugin
 	File ${VIMRT}\plugin\*.*
 
@@ -356,7 +381,9 @@ SectionEnd
 		File ${VIMRT}\keymap\README.txt
 		File ${VIMRT}\keymap\*.vim
 		SetOutPath $0
-		File ${VIMRT}\libintl.dll
+		File ${VIMRT}\libintl-8.dll
+		File ${VIMRT}\libiconv-2.dll
+		File /nonfatal ${VIMRT}\libwinpthread-1.dll
 	SectionEnd
 !endif
 

nsis/gvim_version.nsh

@@ -0,0 +1,6 @@
+# Generated from Makefile: define the version numbers
+!ifndef __GVIM_VER__NSH__
+!define __GVIM_VER__NSH__
+!define VER_MAJOR 7
+!define VER_MINOR 4
+!endif

runtime/autoload/python3complete.vim

@@ -1,7 +1,7 @@
 "python3complete.vim - Omni Completion for python
 " Maintainer: Aaron Griffin <aaronmgriffin@gmail.com>
 " Version: 0.9
-" Last Updated: 18 Jun 2009
+" Last Updated: 18 Jun 2009 (small fix 2015 Sep 14 from Debian)
 "
 " Roland Puntaier: this file contains adaptations for python3 and is parallel to pythoncomplete.vim
 "
@@ -359,6 +359,7 @@ class PyParser:
     def __init__(self):
         self.top = Scope('global',0)
         self.scope = self.top
+        self.parserline = 0
 
     def _parsedotname(self,pre=None):
         #returns (dottedname, nexttoken)

runtime/autoload/pythoncomplete.vim

@@ -377,6 +377,7 @@ class PyParser:
     def __init__(self):
         self.top = Scope('global',0)
         self.scope = self.top
+        self.parserline = 0
 
     def _parsedotname(self,pre=None):
         #returns (dottedname, nexttoken)

runtime/autoload/sqlcomplete.vim

@@ -1,8 +1,8 @@
 " Vim OMNI completion script for SQL
 " Language:    SQL
 " Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
-" Version:     15.0
-" Last Change: 2013 May 13
+" Version:     16.0
+" Last Change: 2015 Dec 29
 " Homepage:    http://www.vim.org/scripts/script.php?script_id=1572
 " Usage:       For detailed help
 "              ":help sql.txt"
@@ -16,6 +16,12 @@
 "       look backwards to a FROM clause and find the first table
 "       and complete it.
 "
+" Version 16.0 (Dec 2015)
+"     - NF: If reseting the cache and table, procedure or view completion
+"           had been used via dbext, have dbext delete or recreate the 
+"           dictionary so that new objects are picked up for the 
+"           next completion.
+"
 " Version 15.0 (May 2013)
 "     - NF: Changed the SQL precached syntax items, omni_sql_precache_syntax_groups,
 "           to use regular expressions to pick up extended syntax group names.
@@ -103,7 +109,7 @@ endif
 if exists('g:loaded_sql_completion')
     finish
 endif
-let g:loaded_sql_completion = 150
+let g:loaded_sql_completion = 160
 let s:keepcpo= &cpo
 set cpo&vim
 
@@ -459,6 +465,29 @@ function! sqlcomplete#Complete(findstart, base)
         let s:tbl_cols           = []
         let s:syn_list           = []
         let s:syn_value          = []
+
+        if s:sql_file_table != ""
+            if g:loaded_dbext >= 2300
+                call DB_DictionaryDelete("table")
+            else
+                DBCompleteTables!
+            endif
+        endif
+        if s:sql_file_procedure != ""
+            if g:loaded_dbext >= 2300
+                call DB_DictionaryDelete("procedure")
+            else
+                DBCompleteProcedures!
+            endif
+        endif
+        if s:sql_file_view != ""
+            if g:loaded_dbext >= 2300
+                call DB_DictionaryDelete("view")
+            else
+                DBCompleteViews!
+            endif
+        endif
+
         let s:sql_file_table     = ""
         let s:sql_file_procedure = ""
         let s:sql_file_view      = ""

runtime/autoload/tohtml.vim

@@ -1,6 +1,6 @@
 " Vim autoload file for the tohtml plugin.
 " Maintainer: Ben Fritz <fritzophrenic@gmail.com>
-" Last Change: 2013 Jun 19
+" Last Change: 2013 Sep 03
 "
 " Additional contributors:
 "
@@ -302,7 +302,7 @@ func! tohtml#Convert2HTML(line1, line2) "{{{
   else "{{{
     let win_list = []
     let buf_list = []
-    windo | if &diff | call add(win_list, winbufnr(0)) | endif
+    windo if &diff | call add(win_list, winbufnr(0)) | endif
     let s:settings.whole_filler = 1
     let g:html_diff_win_num = 0
     for window in win_list

runtime/autoload/vimball.vim

@@ -1,9 +1,9 @@
 " vimball.vim : construct a file containing both paths and files
-" Author:	Charles E. Campbell, Jr.
-" Date:		Jan 17, 2012
-" Version:	35
+" Author:	Charles E. Campbell
+" Date:		Apr 11, 2016
+" Version:	37
 " GetLatestVimScripts: 1502 1 :AutoInstall: vimball.vim
-" Copyright: (c) 2004-2011 by Charles E. Campbell, Jr.
+" Copyright: (c) 2004-2011 by Charles E. Campbell
 "            The VIM LICENSE applies to Vimball.vim, and Vimball.txt
 "            (see |copyright|) except use "Vimball" instead of "Vim".
 "            No warranty, express or implied.
@@ -14,7 +14,7 @@
 if &cp || exists("g:loaded_vimball")
  finish
 endif
-let g:loaded_vimball = "v35"
+let g:loaded_vimball = "v37"
 if v:version < 702
  echohl WarningMsg
  echo "***warning*** this version of vimball needs vim 7.2"
@@ -142,7 +142,7 @@ fun! vimball#MkVimball(line1,line2,writelevel,...) range
  
    let lastline= line("$") + 1
    if lastline == 2 && getline("$") == ""
-	call setline(1,'" Vimball Archiver by Charles E. Campbell, Jr., Ph.D.')
+	call setline(1,'" Vimball Archiver by Charles E. Campbell')
 	call setline(2,'UseVimball')
 	call setline(3,'finish')
 	let lastline= line("$") + 1
@@ -179,7 +179,7 @@ fun! vimball#MkVimball(line1,line2,writelevel,...) range
   " remove the evidence
   setlocal nomod bh=wipe
   exe "tabn ".curtabnr
-  exe "tabc ".vbtabnr
+  exe "tabc! ".vbtabnr
 
   " restore options
   call vimball#RestoreSettings()
@@ -280,7 +280,7 @@ fun! vimball#Vimball(really,...)
    " when AsNeeded/filename is filereadable or was present in VimballRecord
    if fname =~ '\<plugin/'
    	let anfname= substitute(fname,'\<plugin/','AsNeeded/','')
-	if filereadable(anfname) || (exists("s:VBRstring") && s:VBRstring =~ anfname)
+	if filereadable(anfname) || (exists("s:VBRstring") && s:VBRstring =~# anfname)
 "	 call Decho("using anfname<".anfname."> instead of <".fname.">")
 	 let fname= anfname
 	endif
@@ -379,10 +379,10 @@ fun! vimball#Vimball(really,...)
   call s:RecordInFile(home)
 
   " restore events, delete tab and buffer
-  exe "tabn ".vbtabnr
+  exe "sil! tabn ".vbtabnr
   setlocal nomod bh=wipe
-  exe "tabn ".curtabnr
-  exe "tabc ".vbtabnr
+  exe "sil! tabn ".curtabnr
+  exe "sil! tabc! ".vbtabnr
   call vimball#RestoreSettings()
   call s:ChgDir(curdir)
 
@@ -555,7 +555,7 @@ fun! vimball#ShowMesg(level,msg)
   set noruler noshowcmd
   redraw!
 
-  if &fo =~ '[ta]'
+  if &fo =~# '[ta]'
    echomsg "***vimball*** ".a:msg
   else
    if a:level == s:WARNING || a:level == s:USAGE
@@ -715,7 +715,7 @@ fun! vimball#SaveSettings()
 "  call Dfunc("SaveSettings()")
   let s:makeep  = getpos("'a")
   let s:regakeep= @a
-  if exists("&acd")
+  if exists("+acd")
    let s:acdkeep = &acd
   endif
   let s:eikeep  = &ei
@@ -728,7 +728,7 @@ fun! vimball#SaveSettings()
   let s:vekeep  = &ve
   let s:ffkeep  = &l:ff
   let s:swfkeep = &l:swf
-  if exists("&acd")
+  if exists("+acd")
    setlocal ei=all ve=all noacd nofen noic report=999 nohid bt= ma lz pm= ff=unix noswf
   else
    setlocal ei=all ve=all       nofen noic report=999 nohid bt= ma lz pm= ff=unix noswf
@@ -743,7 +743,7 @@ endfun
 fun! vimball#RestoreSettings()
 "  call Dfunc("RestoreSettings()")
   let @a      = s:regakeep
-  if exists("&acd")
+  if exists("+acd")
    let &acd   = s:acdkeep
   endif
   let &l:fen  = s:fenkeep
@@ -760,7 +760,7 @@ fun! vimball#RestoreSettings()
 "   call Decho("restore mark-a: makeep=".string(makeep))
    call setpos("'a",s:makeep)
   endif
-  if exists("&acd")
+  if exists("+acd")
    unlet s:acdkeep
   endif
   unlet s:regakeep s:eikeep s:fenkeep s:hidkeep s:ickeep s:repkeep s:vekeep s:makeep s:lzkeep s:pmkeep s:ffkeep

runtime/compiler/gcc.vim

@@ -2,6 +2,7 @@
 " Compiler:         GNU C Compiler
 " Maintainer:       Nikolai Weibull <now@bitwi.se>
 " Latest Revision:  2010-10-14
+" 			added line suggested by Anton Lindqvist 2016 Mar 31
 
 if exists("current_compiler")
   finish
@@ -24,6 +25,7 @@ CompilerSet errorformat=
       \%f:%l:\ %trror:\ %m,
       \%f:%l:\ %tarning:\ %m,
       \%f:%l:\ %m,
+      \%f:\\(%*[^\\)]\\):\ %m,
       \\"%f\"\\,\ line\ %l%*\\D%c%*[^\ ]\ %m,
       \%D%*\\a[%*\\d]:\ Entering\ directory\ [`']%f',
       \%X%*\\a[%*\\d]:\ Leaving\ directory\ [`']%f',

runtime/compiler/tidy.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
 " Compiler:	HTML Tidy
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2013 Jul 7
+" Last Change:	2016 Apr 21
 
 if exists("current_compiler")
   finish
@@ -12,8 +12,8 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
   command -nargs=* CompilerSet setlocal <args>
 endif
 
-CompilerSet makeprg=tidy\ -quiet\ -errors\ --gnu-emacs\ yes\ %
+CompilerSet makeprg=tidy\ -quiet\ -errors\ --gnu-emacs\ yes\ %:S
 
-" sample warning: foo.html:8:1: Warning: inserting missing 'foobar' element
-" sample error:   foo.html:9:2: Error: <foobar> is not recognized!
-CompilerSet errorformat=%f:%l:%c:\ Error:%m,%f:%l:%c:\ Warning:%m,%-G%.%#
+" foo.html:8:1: Warning: inserting missing 'foobar' element
+" foo.html:9:2: Error: <foobar> is not recognized!
+CompilerSet errorformat=%f:%l:%c:\ %trror:%m,%f:%l:%c:\ %tarning:%m,%-G%.%#

runtime/doc/Makefile

@@ -17,6 +17,7 @@ DOCS = \
 	arabic.txt \
 	autocmd.txt \
 	change.txt \
+	channel.txt \
 	cmdline.txt \
 	debug.txt \
 	debugger.txt \
@@ -31,7 +32,6 @@ DOCS = \
 	ft_ada.txt \
 	ft_sql.txt \
 	gui.txt \
-	gui_w16.txt \
 	gui_w32.txt \
 	gui_x11.txt \
 	hangulin.txt \
@@ -142,6 +142,7 @@ DOCS = \
 	version5.txt \
 	version6.txt \
 	version7.txt \
+	version8.txt \
 	vi_diff.txt \
 	visual.txt \
 	windows.txt \
@@ -151,6 +152,7 @@ HTMLS = \
 	arabic.html \
 	autocmd.html \
 	change.html \
+	channel.html \
 	cmdline.html \
 	debug.html \
 	debugger.html \
@@ -165,7 +167,6 @@ HTMLS = \
 	ft_ada.html \
 	ft_sql.html \
 	gui.html \
-	gui_w16.html \
 	gui_w32.html \
 	gui_x11.html \
 	hangulin.html \
@@ -275,6 +276,7 @@ HTMLS = \
 	version5.html \
 	version6.html \
 	version7.html \
+	version8.html \
 	vi_diff.html \
 	vimindex.html \
 	visual.html \
@@ -386,9 +388,6 @@ hebrew.txt:
 russian.txt:
 	touch russian.txt
 
-gui_w16.txt:
-	touch gui_w16.txt
-
 gui_w32.txt:
 	touch gui_w32.txt
 

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 7.4.  Last change: 2015 Aug 18
+*autocmd.txt*   For Vim version 7.4.  Last change: 2016 Apr 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -539,6 +539,9 @@ CursorHold			When the user doesn't press a key for the time
 				versions}
 							*CursorHoldI*
 CursorHoldI			Just like CursorHold, but in Insert mode.
+				Not triggered when waiting for another key,
+				e.g. after CTRL-V, and not when in CTRL-X mode
+				|insert_expand|.
 
 							*CursorMoved*
 CursorMoved			After the cursor was moved in Normal or Visual
@@ -918,7 +921,15 @@ VimEnter			After doing all the startup stuff, including
 				loading .vimrc files, executing the "-c cmd"
 				arguments, creating all windows and loading
 				the buffers in them.
-							*VimLeave*
+				Just before this event is triggered the
+				|v:vim_did_enter| variable is set, so that you
+				can do: >
+				   if v:vim_did_enter
+				     call s:init()
+				   else
+ 	  			     au VimEnter * call s:init()
+				   endif
+<							*VimLeave*
 VimLeave			Before exiting Vim, just after writing the
 				.viminfo file.  Executed only once, like
 				VimLeavePre.
@@ -1131,6 +1142,9 @@ name!
 :aug[roup] {name}		Define the autocmd group name for the
 				following ":autocmd" commands.  The name "end"
 				or "END" selects the default group.
+				To avoid confusion, the name should be
+				different from existing {event} names, as this
+				most likely will not do what you intended.
 
 						*:augroup-delete* *E367*
 :aug[roup]! {name}		Delete the autocmd group {name}.  Don't use

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 7.4.  Last change: 2015 Aug 04
+*change.txt*    For Vim version 7.4.  Last change: 2016 Apr 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -98,10 +98,10 @@ These commands delete text.  You can repeat them with the `.` command
 
 An exception for the d{motion} command: If the motion is not linewise, the
 start and end of the motion are not in the same line, and there are only
-blanks before the start and after the end of the motion, the delete becomes
-linewise.  This means that the delete also removes the line of blanks that you
-might expect to remain. Use the |o_v| operator to force the motion to be
-characterwise.
+blanks before the start and there are no non-blanks after the end of the
+motion, the delete becomes linewise.  This means that the delete also removes
+the line of blanks that you might expect to remain. Use the |o_v| operator to
+force the motion to be characterwise.
 
 Trying to delete an empty region of text (e.g., "d0" in the first column)
 is an error when 'cpoptions' includes the 'E' flag.
@@ -109,7 +109,9 @@ is an error when 'cpoptions' includes the 'E' flag.
 							*J*
 J			Join [count] lines, with a minimum of two lines.
 			Remove the indent and insert up to two spaces (see
-			below).
+			below).  Fails when on the last line of the buffer.
+			If [count] is too big it is reduce to the number of
+			lines available.
 
 							*v_J*
 {Visual}J		Join the highlighted lines, with a minimum of two
@@ -409,6 +411,11 @@ CTRL-X			Subtract [count] from the number or alphabetic
 {Visual}CTRL-X		Subtract [count] from the number or alphabetic
 			character in the highlighted text.  {not in Vi}
 
+			On MS-Windows, this is mapped to cut Visual text
+			|dos-standard-mappings|.  If you want to disable the
+			mapping, use this: >
+				silent! vunmap <C-X>
+<
 							*v_g_CTRL-X*
 {Visual}g CTRL-X	Subtract [count] from the number or alphabetic
 			character in the highlighted text. If several lines
@@ -416,9 +423,14 @@ CTRL-X			Subtract [count] from the number or alphabetic
 			additional [count] (so effectively creating a [count]
 			decrementing sequence).  {not in Vi}
 
-The CTRL-A and CTRL-X commands work for (signed) decimal numbers, unsigned
-octal and hexadecimal numbers and alphabetic characters.  This depends on the
-'nrformats' option.
+The CTRL-A and CTRL-X commands can work for:
+- signed and unsigned decimal numbers
+- unsigned binary, octal and hexadecimal numbers
+- alphabetic characters
+
+This depends on the 'nrformats' option:
+- When 'nrformats' includes "bin", Vim assumes numbers starting with '0b' or
+  '0B' are binary.
 - When 'nrformats' includes "octal", Vim considers numbers starting with a '0'
   to be octal, unless the number includes a '8' or '9'.  Other numbers are
   decimal and may have a preceding minus sign.
@@ -433,8 +445,8 @@ octal and hexadecimal numbers and alphabetic characters.  This depends on the
   index.
 
 For decimals a leading negative sign is considered for incrementing/
-decrementing, for octal and hex values, it won't be considered.
-To ignore the sign Visually select the number before using CTRL-A or CTRL-X. 
+decrementing, for binary, octal and hex values, it won't be considered.  To
+ignore the sign Visually select the number before using CTRL-A or CTRL-X. 
 
 For numbers with leading zeros (including all octal and hexadecimal numbers),
 Vim preserves the number of characters in the number when possible.  CTRL-A on
@@ -447,6 +459,10 @@ octal number.
 Note that when 'nrformats' includes "octal", decimal numbers with leading
 zeros cause mistakes, because they can be confused with octal numbers.
 
+Note similarly, when 'nrformats' includes "bin", binary numbers with a leading
+'0x' or '0X' can be interpreted as hexadecimal rather than binary since '0b'
+are valid hexadecimal digits.
+
 The CTRL-A command is very useful in a macro.  Example: Use the following
 steps to make a numbered list.
 
@@ -836,7 +852,7 @@ Examples: >
   :s/abcde/abc^Mde/		 modifies "abcde"    to "abc", "de" (two lines)
   :s/$/\^M/			 modifies "abcde"    to "abcde^M"
   :s/\w\+/\u\0/g		 modifies "bla bla"  to "Bla Bla"
-  :s/\w\+/\L\u/g		 modifies "BLA bla"  to "Bla Bla"
+  :s/\w\+/\L\u\0/g		 modifies "BLA bla"  to "Bla Bla"
 
 Note: "\L\u" can be used to capitalize the first letter of a word.  This is
 not compatible with Vi and older versions of Vim, where the "\u" would cancel
@@ -863,6 +879,36 @@ either the first or second pattern in parentheses did not match, so either
   :s/\([ab]\)\|\([cd]\)/\1x/g   modifies "a b c d"  to "ax bx x x"
 <
 
+		*:sc* *:sce* *:scg* *:sci* *:scI* *:scl* *:scp* *:sg* *:sgc*
+		*:sge* *:sgi* *:sgI* *:sgl* *:sgn* *:sgp* *:sgr* *:sI* *:si*
+		*:sic* *:sIc* *:sie* *:sIe* *:sIg* *:sIl* *:sin* *:sIn* *:sIp*
+		*:sip* *:sIr* *:sir* *:sr* *:src* *:srg* *:sri* *:srI* *:srl*
+		*:srn* *:srp*
+2-letter and 3-letter :substitute commands ~
+
+     List of :substitute commands
+     |      c    e    g    i    I    n    p    l    r
+     | c  :sc  :sce :scg :sci :scI :scn :scp :scl  ---
+     | e
+     | g  :sgc :sge :sg  :sgi :sgI :sgn :sgp :sgl :sgr
+     | i  :sic :sie  --- :si  :siI :sin :sip  --- :sir
+     | I  :sIc :sIe :sIg :sIi :sI  :sIn :sIp :sIl :sIr
+     | n
+     | p
+     | l
+     | r  :src  --- :srg :sri :srI :srn :srp :srl :sr
+
+Exceptions:
+     :scr  is  `:scriptnames`
+     :se   is  `:set`
+     :sig  is  `:sign`
+     :sil  is  `:silent`
+     :sn   is  `:snext`
+     :sp   is  `:split`
+     :sl   is  `:sleep`
+     :sre  is  `:srewind`
+
+
 Substitute with an expression			*sub-replace-expression*
 						*sub-replace-\=* *s/\=*
 When the substitute string starts with "\=" the remainder is interpreted as an
@@ -938,8 +984,6 @@ This replaces each 'E' character with a euro sign.  Read more in |<Char->|.
 			`:retab!` may also change a sequence of spaces by
 			<Tab> characters, which can mess up a printf().
 			{not in Vi}
-			Not available when |+ex_extra| feature was disabled at
-			compile time.
 
 							*retab-example*
 Example for using autocommands and ":retab" to edit a file which is stored
@@ -968,7 +1012,7 @@ inside of strings can change!  Also see 'softtabstop' option. >
 
 :reg[isters] {arg}	Display the contents of the numbered and named
 			registers that are mentioned in {arg}.  For example: >
-				:dis 1a
+				:reg 1a
 <			to display registers '1' and 'a'.  Spaces are allowed
 			in {arg}.  {not in Vi}
 
@@ -1135,7 +1179,7 @@ Rationale:	In Vi the "y" command followed by a backwards motion would
 With a linewise yank command the cursor is put in the first line, but the
 column is unmodified, thus it may not be on the first yanked character.
 
-There are nine types of registers:			*registers* *E354*
+There are ten types of registers:			*registers* *E354*
 1. The unnamed register ""
 2. 10 numbered registers "0 to "9
 3. The small delete register "-
@@ -1161,7 +1205,7 @@ name '"'.  This means you have to type two double quotes.  Writing to the ""
 register writes to register "0.
 {Vi: register contents are lost when changing files, no '"'}
 
-2. Numbered registers "0 to "9		*quote_number* *quote0*	*quote1*
+2. Numbered registers "0 to "9		*quote_number* *quote0* *quote1*
 					*quote2* *quote3* *quote4* *quote9*
 Vim fills these registers with text from yank and delete commands.
    Numbered register 0 contains the text from the most recent yank command,
@@ -1315,22 +1359,16 @@ The next three commands always work on whole lines.
 			Center lines in [range] between [width] columns
 			(default 'textwidth' or 80 when 'textwidth' is 0).
 			{not in Vi}
-			Not available when |+ex_extra| feature was disabled at
-			compile time.
 
 :[range]ri[ght] [width]					*:ri* *:right*
 			Right-align lines in [range] at [width] columns
 			(default 'textwidth' or 80 when 'textwidth' is 0).
 			{not in Vi}
-			Not available when |+ex_extra| feature was disabled at
-			compile time.
 
 							*:le* *:left*
 :[range]le[ft] [indent]
 			Left-align lines in [range].  Sets the indent in the
 			lines to [indent] (default 0).  {not in Vi}
-			Not available when |+ex_extra| feature was disabled at
-			compile time.
 
 							*gq*
 gq{motion}		Format the lines that {motion} moves over.
@@ -1706,7 +1744,7 @@ Vim has a sorting function and a sorting command.  The sorting function can be
 found here: |sort()|, |uniq()|.
 
 							*:sor* *:sort*
-:[range]sor[t][!] [i][u][r][n][x][o] [/{pattern}/]
+:[range]sor[t][!] [b][f][i][n][o][r][u][x] [/{pattern}/]
 			Sort lines in [range].  When no range is given all
 			lines are sorted.
 
@@ -1714,10 +1752,18 @@ found here: |sort()|, |uniq()|.
 
 			With [i] case is ignored.
 
+			Options [n][f][x][o][b] are mutually exclusive.
+
 			With [n] sorting is done on the first decimal number
 			in the line (after or inside a {pattern} match).
 			One leading '-' is included in the number.
 
+			With [f] sorting is done on the Float in the line.
+			The value of Float is determined similar to passing
+			the text (after or inside a {pattern} match) to
+			str2float() function. This option is available only
+			if Vim was compiled with Floating point support.
+
 			With [x] sorting is done on the first hexadecimal
 			number in the line (after or inside a {pattern}
 			match).  A leading "0x" or "0X" is ignored.
@@ -1726,10 +1772,13 @@ found here: |sort()|, |uniq()|.
 			With [o] sorting is done on the first octal number in
 			the line (after or inside a {pattern} match).
 
-			With [u] only keep the first of a sequence of
-			identical lines (ignoring case when [i] is used).
-			Without this flag, a sequence of identical lines
-			will be kept in their original order.
+			With [b] sorting is done on the first binary number in
+			the line (after or inside a {pattern} match).
+
+			With [u] (u stands for unique) only keep the first of
+			a sequence of identical lines (ignoring case when [i]
+			is used).  Without this flag, a sequence of identical
+			lines will be kept in their original order.
 			Note that leading and trailing white space may cause
 			lines to be different.
 

runtime/doc/channel.txt

@@ -0,0 +1,710 @@
+*channel.txt*      For Vim version 7.4.  Last change: 2016 May 29
+
+
+		  VIM REFERENCE MANUAL	  by Bram Moolenaar
+
+
+		      Inter-process communication		*channel*
+
+DRAFT  DRAFT  DRAFT  DRAFT  DRAFT  DRAFT  DRAFT  DRAFT  DRAFT  DRAFT
+
+Vim uses channels to communicate with other processes.
+A channel uses a socket or pipes			*socket-interface*
+Jobs can be used to start processes and communicate with them.
+
+Vim current supports up to 10 simultaneous channels.
+The Netbeans interface also uses a channel. |netbeans|
+
+1. Overview				|job-channel-overview|
+2. Channel demo				|channel-demo|
+3. Opening a channel			|channel-open|
+4. Using a JSON or JS channel		|channel-use|
+5. Channel commands			|channel-commands|
+6. Using a RAW or NL channel		|channel-raw|
+7. More channel functions		|channel-more|
+8. Starting a job with a channel	|job-start|
+9. Starting a job without a channel	|job-start-nochannel|
+10. Job options				|job-options|
+11. Controlling a job			|job-control|
+
+{Vi does not have any of these features}
+{only when compiled with the |+channel| feature for channel stuff}
+{only when compiled with the |+job| feature for job stuff}
+
+==============================================================================
+1. Overview						*job-channel-overview*
+
+There are four main types of jobs:
+1. A deamon, serving several Vim instances.
+   Vim connects to it with a socket.
+2. One job working with one Vim instance, asynchronously.
+   Uses a socket or pipes.
+3. A job performing some work for a short time, asynchronously.
+   Uses a socket or pipes.
+4. Running a filter, synchronously.
+   Uses pipes.
+
+For when using sockets See |job-start|, |job-start-nochannel| and
+|channel-open|.  For 2 and 3, one or more jobs using pipes, see |job-start|.
+For 4 use the ":{range}!cmd" command, see |filter|.
+
+Over the socket and pipes these protocols are available:
+RAW	nothing known, Vim cannot tell where a message ends
+NL	every message ends in a NL (newline) character
+JSON	JSON encoding |json_encode()|
+JS	JavaScript style JSON-like encoding |js_encode()|
+
+Common combination are:
+- Using a job connected through pipes in NL mode.  E.g., to run a style
+  checker and receive errors and warnings.
+- Using a deamon, connecting over a socket in JSON mode.  E.g. to lookup
+  crosss-refrences in a database.
+
+==============================================================================
+2. Channel demo				*channel-demo* *demoserver.py*
+
+This requires Python.  The demo program can be found in
+$VIMRUNTIME/tools/demoserver.py
+Run it in one terminal.  We will call this T1.
+
+Run Vim in another terminal.  Connect to the demo server with: >
+	let channel = ch_open('localhost:8765')
+
+In T1 you should see:
+	=== socket opened === ~
+
+You can now send a message to the server: >
+	echo ch_evalexpr(channel, 'hello!')
+
+The message is received in T1 and a response is sent back to Vim.
+You can see the raw messages in T1.  What Vim sends is:
+	[1,"hello!"] ~
+And the response is:
+	[1,"got it"] ~
+The number will increase every time you send a message.
+
+The server can send a command to Vim.  Type this on T1 (literally, including
+the quotes):
+	["ex","echo 'hi there'"] ~
+And you should see the message in Vim. You can move the cursor a word forward:
+	["normal","w"] ~
+
+To handle asynchronous communication a callback needs to be used: >
+	func MyHandler(channel, msg)
+	  echo "from the handler: " . a:msg
+	endfunc
+	call ch_sendexpr(channel, 'hello!', {'callback': "MyHandler"})
+Vim will not wait for a response.  Now the server can send the response later
+and MyHandler will be invoked.
+
+Instead of giving a callback with every send call, it can also be specified
+when opening the channel: >
+	call ch_close(channel)
+	let channel = ch_open('localhost:8765', {'callback': "MyHandler"})
+	call ch_sendexpr(channel, 'hello!')
+
+When trying out channels it's useful to see what is going on.  You can tell
+Vim to write lines in log file: >
+	call ch_logfile('channellog', 'w')
+See |ch_logfile()|.
+
+==============================================================================
+3. Opening a channel					*channel-open*
+
+To open a channel: >
+    let channel = ch_open({address} [, {options}])
+    if ch_status(channel) == "open"
+      " use the channel
+
+Use |ch_status()| to see if the channel could be opened.
+
+{address} has the form "hostname:port".  E.g., "localhost:8765".
+
+{options} is a dictionary with optional entries:	*channel-open-options*
+
+"mode" can be:						*channel-mode*
+	"json" - Use JSON, see below; most convenient way. Default.
+	"js"   - Use JS (JavaScript) encoding, more efficient than JSON.
+	"nl"   - Use messages that end in a NL character
+	"raw"  - Use raw messages
+						*channel-callback* *E921*
+"callback"	A function that is called when a message is received that is
+		not handled otherwise.  It gets two arguments: the channel
+		and the received message. Example: >
+	func Handle(channel, msg)
+	  echo 'Received: ' . a:msg
+	endfunc
+	let channel = ch_open("localhost:8765", {"callback": "Handle"})
+<
+		When "mode" is "json" or "js" the "msg" argument is the body
+		of the received message, converted to Vim types.
+		When "mode" is "nl" the "msg" argument is one message,
+		excluding the NL.
+		When "mode" is "raw" the "msg" argument is the whole message
+		as a string.
+
+		For all callbacks: Use |function()| to bind it to arguments
+		and/or a Dictionary.  Or use the form "dict.function" to bind
+		the Dictionary.
+
+		Callbacks are only called at a "safe" moment, usually when Vim
+		is waiting for the user to type a character.  Vim does not use
+		multi-threading.
+
+							*close_cb*
+"close_cb"	A function that is called when the channel gets closed, other
+		than by calling ch_close().  It should be defined like this: >
+	func MyCloseHandler(channel)
+<		Vim will invoke callbacks that handle data before invoking
+		close_cb, thus when this function is called no more data will
+		be received.
+							*waittime*
+"waittime"	The time to wait for the connection to be made in
+		milliseconds.  A negative number waits forever.
+
+		The default is zero, don't wait, which is useful if a local
+		server is supposed to be running already.  On Unix Vim
+		actually uses a 1 msec timeout, that is required on many
+		systems.  Use a larger value for a remote server, e.g.  10
+		msec at least.
+							*channel-timeout*
+"timeout"	The time to wait for a request when blocking, E.g. when using
+		ch_evalexpr().  In milliseconds.  The default is 2000 (2
+		seconds).
+
+When "mode" is "json" or "js" the "callback" is optional.  When omitted it is
+only possible to receive a message after sending one.
+
+To change the channel options after opening it use |ch_setoptions()|.  The
+arguments are similar to what is passed to |ch_open()|, but "waittime" cannot
+be given, since that only applies to opening the channel.
+
+For example, the handler can be added or changed: >
+    call ch_setoptions(channel, {'callback': callback})
+When "callback" is empty (zero or an empty string) the handler is removed.
+
+After a callback has been invoked Vim will update the screen and put the
+cursor back where it belongs.  Thus the callback should not need to do
+`:redraw`.
+
+The timeout can be changed: >
+    call ch_setoptions(channel, {'timeout': msec})
+<
+							  *channel-close* *E906*
+Once done with the channel, disconnect it like this: >
+    call ch_close(channel)
+When a socket is used this will close the socket for both directions.  When
+pipes are used (stdin/stdout/stderr) they are all closed.  This might not be
+what you want!  Stopping the job with job_stop() might be better.
+All readahead is discarded, callbacks will no longer be invoked.
+
+Note that a channel is closed in three stages:
+  - The I/O ends, log message: "Closing channel". There can still be queued
+    messages to read or callbacks to invoke.
+  - The readahead is cleared, log message: "Clearing channel".  Some variables
+    may still reference the channel.
+  - The channel is freed, log message: "Freeing channel".
+
+When the channel can't be opened you will get an error message.  There is a
+difference between MS-Windows and Unix: On Unix when the port doesn't exist
+ch_open() fails quickly.  On MS-Windows "waittime" applies.
+*E898* *E901* *E902*
+
+If there is an error reading or writing a channel it will be closed.
+*E630* *E631* 
+
+==============================================================================
+4. Using a JSON or JS channel					*channel-use*
+
+If mode is JSON then a message can be sent synchronously like this: >
+    let response = ch_evalexpr(channel, {expr})
+This awaits a response from the other side.
+
+When mode is JS this works the same, except that the messages use
+JavaScript encoding.  See |js_encode()| for the difference.
+
+To send a message, without handling a response or letting the channel callback
+handle the response: >
+    call ch_sendexpr(channel, {expr})
+
+To send a message and letting the response handled by a specific function,
+asynchronously: >
+    call ch_sendexpr(channel, {expr}, {'callback': Handler})
+
+Vim will match the response with the request using the message ID.  Once the
+response is received the callback will be invoked.  Further responses with the
+same ID will be ignored.  If your server sends back multiple responses you
+need to send them with ID zero, they will be passed to the channel callback.
+
+The {expr} is converted to JSON and wrapped in an array.  An example of the
+message that the receiver will get when {expr} is the string "hello":
+	[12,"hello"] ~
+
+The format of the JSON sent is:
+    [{number},{expr}]
+
+In which {number} is different every time.  It must be used in the response
+(if any):
+
+    [{number},{response}]
+
+This way Vim knows which sent message matches with which received message and
+can call the right handler.  Also when the messages arrive out of order.
+
+The sender must always send valid JSON to Vim.  Vim can check for the end of
+the message by parsing the JSON.  It will only accept the message if the end
+was received.
+
+When the process wants to send a message to Vim without first receiving a
+message, it must use the number zero:
+    [0,{response}]
+
+Then channel handler will then get {response} converted to Vim types.  If the
+channel does not have a handler the message is dropped.
+
+It is also possible to use ch_sendraw() and ch_evalraw() on a JSON or JS
+channel.  The caller is then completely responsible for correct encoding and
+decoding.
+
+==============================================================================
+5. Channel commands					*channel-commands*
+
+With a JSON channel the process can send commands to Vim that will be
+handled by Vim internally, it does not require a handler for the channel.
+
+Possible commands are:				*E903* *E904* *E905*
+    ["redraw"  {forced}]
+    ["ex",     {Ex command}]
+    ["normal", {Normal mode command}]
+    ["expr",   {expression}, {number}]
+    ["expr",   {expression}]
+    ["call",   {func name}, {argument list}, {number}]
+    ["call",   {func name}, {argument list}]
+
+With all of these: Be careful what these commands do!  You can easily
+interfere with what the user is doing.  To avoid trouble use |mode()| to check
+that the editor is in the expected state.  E.g., to send keys that must be
+inserted as text, not executed as a command:
+    ["ex","if mode() == 'i' | call feedkeys('ClassName') | endif"] ~
+
+Errors in these commands are normally not reported to avoid them messing up
+the display.  If you do want to see them, set the 'verbose' option to 3 or
+higher.
+
+
+Command "redraw" ~
+
+The other commands do not update the screen, so that you can send a sequence
+of commands without the cursor moving around.  You must end with the "redraw"
+command to show any changed text and show the cursor where it belongs.
+
+The argument is normally an empty string:
+	["redraw", ""] ~
+To first clear the screen pass "force":
+	["redraw", "force"] ~
+
+
+Command "ex" ~
+
+The "ex" command is executed as any Ex command.  There is no response for
+completion or error.  You could use functions in an |autoload| script:
+	["ex","call myscript#MyFunc(arg)"]
+
+You can also use "call |feedkeys()|" to insert any key sequence.
+
+When there is an error a message is written to the channel log, if it exists,
+and v:errmsg is set to the error.
+
+
+Command "normal" ~
+
+The "normal" command is executed like with ":normal!", commands are not
+mapped.  Example to open the folds under the cursor:
+	["normal" "zO"]
+
+
+Command "expr"  with response ~
+
+The "expr" command can be used to get the result of an expression.  For
+example, to get the number of lines in the current buffer:
+	["expr","line('$')", -2] ~
+
+It will send back the result of the expression:
+	[-2, "last line"] ~
+The format is:
+	[{number}, {result}]
+
+Here {number} is the same as what was in the request.  Use a negative number
+to avoid confusion with message that Vim sends.  Use a different number on
+every request to be able to match the request with the response.
+
+{result} is the result of the evaluation and is JSON encoded.  If the
+evaluation fails or the result can't be encoded in JSON it is the string
+"ERROR".
+
+
+Command "expr" without a response ~
+
+This command is similar to "expr" above, but does not send back any response.
+Example:
+	["expr","setline('$', ['one', 'two', 'three'])"] ~
+There is no third argument in the request.
+
+
+Command "call" ~
+
+This is similar to "expr", but instead of passing the whole expression as a
+string this passes the name of a function and a list of arguments.  This
+avoids the conversion of the arguments to a string and escaping and
+concatenating them.  Example:
+	["call", "line", ["$"], -2] ~
+
+Leave out the fourth argument if no response is to be sent:
+	["call", "setline", ["$", ["one", "two", "three"]]] ~
+
+==============================================================================
+6. Using a RAW or NL channel				*channel-raw*
+
+If mode is RAW or NL then a message can be send like this: >
+    let response = ch_evalraw(channel, {string})
+
+The {string} is sent as-is.  The response will be what can be read from the
+channel right away.  Since Vim doesn't know how to recognize the end of the
+message you need to take care of it yourself.  The timeout applies for reading
+the first byte, after that it will not wait for anything more.
+
+If mode is "nl" you can send a message in a similar way.  You are expected
+to put in the NL after each message.  Thus you can also send several messages
+ending in a NL at once.  The response will be the text up to and including the
+first NL.  This can also be just the NL for an empty response.
+If no NL was read before the channel timeout an empty string is returned.
+
+To send a message, without expecting a response: >
+    call ch_sendraw(channel, {string})
+The process can send back a response, the channel handler will be called with
+it.
+
+To send a message and letting the response handled by a specific function,
+asynchronously: >
+    call ch_sendraw(channel, {string}, {'callback': 'MyHandler'})
+
+This {string} can also be JSON, use |json_encode()| to create it and
+|json_decode()| to handle a received JSON message.
+
+It is not possible to use |ch_evalexpr()| or |ch_sendexpr()| on a raw channel.
+
+==============================================================================
+7. More channel functions				*channel-more*
+
+To obtain the status of a channel: ch_status(channel).  The possible results
+are:
+	"fail"		Failed to open the channel.
+	"open"		The channel can be used.
+	"buffered"	The channel was closed but there is data to read.
+	"closed"	The channel was closed.
+
+To obtain the job associated with a channel: ch_getjob(channel)
+
+To read one message from a channel: >
+	let output = ch_read(channel)
+This uses the channel timeout.  To read without a timeout, just get any
+message that is available: >
+	let output = ch_read(channel, {'timeout': 0})
+When no message was available then the result is v:none for a JSON or JS mode
+channels, an empty string for a RAW or NL channel.
+
+To read all output from a RAW channel that is available: >
+	let output = ch_readraw(channel)
+To read the error output: >
+	let output = ch_readraw(channel, {"part": "err"})
+
+ch_read() and ch_readraw() use the channel timeout.  When there is nothing to
+read within that time an empty string is returned.  To specify a different
+timeout in msec use the "timeout" option:
+	{"timeout": 123} ~
+To read from the error output use the "part" option:
+	{"part": "err"} ~
+To read a message with a specific ID, on a JS or JSON channel:
+	{"id": 99} ~
+When no ID is specified or the ID is -1, the first message is returned. This
+overrules any callback waiting for this message.
+
+For a RAW channel this returns whatever is available, since Vim does not know
+where a message ends.
+For a NL channel this returns one message.
+For a JS or JSON channel this returns one decoded message.
+This includes any sequence number.
+
+==============================================================================
+8. Starting a job with a channel			*job-start* *job*
+
+To start a job and open a channel for stdin/stdout/stderr: >
+    let job = job_start(command, {options})
+
+You can get the channel with: >
+    let channel = job_getchannel(job)
+
+The channel will use NL mode.  If you want another mode it's best to specify
+this in {options}.  When changing the mode later some text may have already
+been received and not parsed correctly.
+
+If the command produces a line of output that you want to deal with, specify
+a handler for stdout: >
+    let job = job_start(command, {"out_cb": "MyHandler"})
+The function will be called with the channel and a message. You would define
+it like this: >
+    func MyHandler(channel, msg)
+
+Without the handler you need to read the output with |ch_read()| or
+|ch_readraw()|. You can do this in the close callback, see |read-in-close-cb|.
+
+The handler defined for "out_cb" will not receive stderr.  If you want to
+handle that separately, add an "err_cb" handler: >
+    let job = job_start(command, {"out_cb": "MyHandler",
+	    \			  "err_cb": "ErrHandler"})
+
+If you want to handle both stderr and stdout with one handler use the
+"callback" option: >
+    let job = job_start(command, {"callback": "MyHandler"}) 
+
+You can send a message to the command with ch_evalraw().  If the channel is in
+JSON or JS mode you can use ch_evalexpr().
+
+There are several options you can use, see |job-options|.
+For example, to start a job and write its output in buffer "dummy": >
+	let logjob = job_start("tail -f /tmp/log",
+			     \ {'out_io': 'buffer', 'out_name': 'dummy'})
+	sbuf dummy
+
+
+Job input from a buffer ~
+
+To run a job that reads from a buffer: >
+	let job = job_start({command},
+	    \ {'in_io': 'buffer', 'in_name': 'mybuffer'})
+<
+							*E915* *E918*
+The buffer is found by name, similar to |bufnr()|. The buffer must exist and
+be loaded when job_start() is called.
+
+By default this reads the whole buffer.  This can be changed with the "in_top"
+and "in_bot" options.
+
+A special mode is when "in_top" is set to zero and "in_bot" is not set: Every
+time a line is added to the buffer, the last-but-one line will be send to the
+job stdin.  This allows for editing the last line and sending it when pressing
+Enter.
+
+
+Reading job output in the close callback ~
+							*read-in-close-cb*
+If the job can take some time and you don't need intermediate results, you can
+add a close callback and read the output there: >
+
+	func! CloseHandler(channel)
+	  while ch_status(a:channel) == 'buffered'
+	    echomsg ch_read(a:channel)
+	  endwhile
+	endfunc
+	let job = job_start(command, {'close_cb': 'CloseHandler'})
+
+You will want to do something more useful than "echomsg".
+
+==============================================================================
+9. Starting a job without a channel			*job-start-nochannel*
+
+To start another process without creating a channel: >
+    let job = job_start(command,
+    	\ {"in_io": "null", "out_io": "null", "err_io": "null"})
+
+This starts {command} in the background, Vim does not wait for it to finish.
+
+When Vim sees that neither stdin, stdout or stderr are connected, no channel
+will be created.  Often you will want to include redirection in the command to
+avoid it getting stuck.
+
+There are several options you can use, see |job-options|.
+
+							*job-start-if-needed*
+To start a job only when connecting to an address does not work, do something
+like this: >
+	let channel = ch_open(address, {"waittime": 0})
+	if ch_status(channel) == "fail"
+	  let job = job_start(command)
+	  let channel = ch_open(address, {"waittime": 1000})
+	endif
+
+Note that the waittime for ch_open() gives the job one second to make the port
+available.
+
+==============================================================================
+10. Job options						*job-options*
+
+The {options} argument in job_start() is a dictionary.  All entries are
+optional.  Some options can be used after the job has started, using
+job_setoptions(job, {options}).  Many options can be used with the channel
+related to the job, using ch_setoptions(channel, {options}).
+See |job_setoptions()| and |ch_setoptions()|.
+
+						*in_mode* *out_mode* *err_mode*
+"in_mode"		mode specifically for stdin, only when using pipes
+"out_mode"		mode specifically for stdout, only when using pipes
+"err_mode"		mode specifically for stderr, only when using pipes
+			See |channel-mode| for the values.
+
+			Note: when setting "mode" the part specific mode is
+			overwritten.  Therefore set "mode" first and the part
+			specific mode later.
+
+			Note: when writing to a file or buffer and when
+			reading from a buffer NL mode is used by default.
+
+						*job-callback*
+"callback": handler	Callback for something to read on any part of the
+			channel.
+						*job-out_cb* *out_cb*
+"out_cb": handler	Callback for when there is something to read on
+			stdout.  Only for when the channel uses pipes.  When
+			"out_cb" wasn't set the channel callback is used.
+
+						*job-err_cb* *err_cb*
+"err_cb": handler	Callback for when there is something to read on
+			stderr.  Only for when the channel uses pipes.  When
+			"err_cb" wasn't set the channel callback is used.
+						*job-close_cb*
+"close_cb": handler	Callback for when the channel is closed.  Same as
+			"close_cb" on ch_open().
+						*job-exit_cb*
+"exit_cb": handler	Callback for when the job ends.  The arguments are the
+			job and the exit status.
+			Vim checks about every 10 seconds for jobs that ended.
+			The check also be triggered by calling |job_status()|,
+			which may then invoke the exit_cb handler.
+			Note that data can be buffered, callbacks may still be
+			called after the process ends.
+							*job-timeout*
+"timeout"		The time to wait for a request when blocking, E.g.
+			when using ch_evalexpr().  In milliseconds.  The
+			default is 2000 (2 seconds).
+						*out_timeout* *err_timeout*
+"out_timeout"		Timeout for stdout.  Only when using pipes.
+"err_timeout"		Timeout for stderr.  Only when using pipes.
+			Note: when setting "timeout" the part specific mode is
+			overwritten.  Therefore set "timeout" first and the
+			part specific mode later.
+
+						*job-stoponexit*
+"stoponexit": {signal}	Send {signal} to the job when Vim exits.  See
+			|job_stop()| for possible values.
+"stoponexit": ""	Do not stop the job when Vim exits.
+			The default is "term".
+
+						*job-term*
+"term": "open"		Start a terminal and connect the job
+			stdin/stdout/stderr to it.
+			NOTE: Not implemented yet!
+
+"channel": {channel}	Use an existing channel instead of creating a new one.
+			The parts of the channel that get used for the new job
+			will be disconnected from what they were used before.
+			If the channel was still use by another job this may
+			cause I/O errors.
+			Existing callbacks and other settings remain.
+
+				*job-in_io* *in_top* *in_bot* *in_name* *in_buf*
+"in_io": "null"		disconnect stdin (read from /dev/null)
+"in_io": "pipe"		stdin is connected to the channel (default)
+"in_io": "file"		stdin reads from a file
+"in_io": "buffer"	stdin reads from a buffer
+"in_top": number	when using "buffer": first line to send (default: 1)
+"in_bot": number	when using "buffer": last line to send (default: last)
+"in_name": "/path/file"	the name of the file or buffer to read from
+"in_buf": number	the number of the buffer to read from
+
+				*job-out_io* *out_name* *out_buf*
+"out_io": "null"	disconnect stdout (goes to /dev/null)
+"out_io": "pipe"	stdout is connected to the channel (default)
+"out_io": "file"	stdout writes to a file
+"out_io": "buffer" 	stdout appends to a buffer (see below)
+"out_name": "/path/file" the name of the file or buffer to write to
+"out_buf": number	the number of the buffer to write to
+"out_modifiable": 0	when writing to a buffer, 'modifiable' will be off
+			(see below)
+
+				*job-err_io* *err_name* *err_buf*
+"err_io": "out"		stderr messages to go to stdout
+"err_io": "null"	disconnect stderr  (goes to /dev/null)
+"err_io": "pipe"	stderr is connected to the channel (default)
+"err_io": "file"	stderr writes to a file
+"err_io": "buffer" 	stderr appends to a buffer (see below)
+"err_name": "/path/file" the name of the file or buffer to write to
+"err_buf": number	the number of the buffer to write to
+"err_modifiable": 0	when writing to a buffer, 'modifiable' will be off
+			(see below)
+
+"block_write": number	only for testing: pretend every other write to stdin
+			will block
+
+
+Writing to a buffer ~
+
+When the out_io or err_io mode is "buffer" and there is a callback, the text
+is appended to the buffer before invoking the callback.
+
+When a buffer is used both for input and output, the output lines are put
+above the last line, since the last line is what is written to the channel
+input.  Otherwise lines are appended below the last line.
+
+When using JS or JSON mode with "buffer", only messages with zero or negative
+ID will be added to the buffer, after decoding + encoding.  Messages with a
+positive number will be handled by a callback, commands are handled as usual.
+
+The name of the buffer is compared the full name of existing buffers.  If
+there is a match that buffer is used.  Otherwise a new buffer is created.
+Use an empty name to always create a new buffer.  |ch_getbufnr()| can then be
+used to get the buffer number.
+
+For a new buffer 'buftype' is set to "nofile" and 'bufhidden' to "hide".  If
+you prefer other settings, create the buffer first and pass the buffer number.
+
+The "out_modifiable" and "err_modifiable" options can be used to set the
+'modifiable' option off, or write to a buffer that has 'modifiable' off.  That
+means that lines will be appended to the buffer, but the user can't easily
+change the buffer.
+
+When an existing buffer is to be written where 'modifiable' is off and the
+"out_modifiable" or "err_modifiable" options is not zero, an error is given
+and the buffer will not be written to.
+
+When the buffer written to is displayed in a window and the cursor is in the
+first column of the last line, the cursor will be moved to the newly added
+line and the window is scrolled up to show the cursor if needed.
+
+Undo is synced for every added line.
+
+
+Writing to a file ~
+							*E920*
+The file is created with permissions 600 (read-write for the user, not
+accessible for others).  Use |setfperm()| to change this.
+
+If the file already exists it is truncated.
+
+==============================================================================
+11. Controlling a job					*job-control*
+
+To get the status of a job: >
+	echo job_status(job)
+
+To make a job stop running: >
+	job_stop(job)
+
+This is the normal way to end a job. On Unix it sends a SIGTERM to the job.
+It is possible to use other ways to stop the job, or even send arbitrary
+signals.  E.g. to force a job to stop, "kill it": >
+	job_stop(job, "kill")
+
+For more options see |job_stop()|.
+
+
+ vim:tw=78:ts=8:ft=help:norl:

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 7.4.  Last change: 2015 Jul 28
+*cmdline.txt*   For Vim version 7.4.  Last change: 2015 Dec 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -101,6 +101,11 @@ CTRL-E or <End>					*c_CTRL-E* *c_<End>* *c_End*
 							*c_<LeftMouse>*
 <LeftMouse>	Move the cursor to the position of the mouse click.
 
+							*c_<MiddleMouse>*
+<MiddleMouse>	Paste the contents of the clipboard (for X11 the primary
+		selection).  This is similar to using CTRL-R *, but no CR
+		characters are inserted between lines.
+
 CTRL-H						*c_<BS>* *c_CTRL-H* *c_BS*
 <BS>		Delete the character in front of the cursor (see |:fixdel| if
 		your <BS> key does not do what you want).
@@ -818,12 +823,12 @@ Note: these are typed literally, they are not special keys!
 		   (for FileType, Syntax and SpellFileMissing events).
 	<sfile>    When executing a ":source" command, is replaced with the
 		   file name of the sourced file.  *E498*
-		   When executing a function, is replaced with
-		   "function {function-name}"; function call nesting is
-		   indicated like this:
-		   "function {function-name1}..{function-name2}".  Note that
-		   filename-modifiers are useless when <sfile> is used inside
-		   a function.
+		   When executing a function, is replaced with:
+		   "function {function-name}[{lnum}]"
+		   function call nesting is indicated like this:
+		   "function {function-name1}[{lnum}]..{function-name2}[{lnum}]"
+		   Note that filename-modifiers are useless when <sfile> is
+		   used inside a function.
 	<slnum>	   When executing a ":source" command, is replaced with the
 	           line number.  *E842*
 		   When executing a function it's the line number relative to

runtime/doc/develop.txt

@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 7.4.  Last change: 2014 Mar 27
+*develop.txt*   For Vim version 7.4.  Last change: 2016 Jan 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -166,12 +166,27 @@ This list is not complete.  Look in the source code for more examples.
 MAKING CHANGES						*style-changes*
 
 The basic steps to make changes to the code:
-1. Adjust the documentation.  Doing this first gives you an impression of how
+1. Get the code from github.  That makes it easier to keep your changed
+   version in sync with the main code base (it may be a while before your
+   changes will be included).  You do need to spend some time learning git,
+   it's not the most user friendly tool.
+2. Adjust the documentation.  Doing this first gives you an impression of how
    your changes affect the user.
-2. Make the source code changes.
-3. Check ../doc/todo.txt if the change affects any listed item.
-4. Make a patch with "diff -c" against the unmodified code and docs.
-5. Make a note about what changed and include it with the patch.
+3. Make the source code changes.
+4. Check ../doc/todo.txt if the change affects any listed item.
+5. Make a patch with "git diff".  You can also create a pull request on
+   github, but it's the diff that matters.
+6. Make a note about what changed, preferably mentioning the problem and the
+   solution.  Send an email to the vim-dev maillist with an explanation and
+   include the diff. Or create a pull request on github.
+
+
+C COMPILER						*style-compiler*
+
+The minimal C compiler version supported is C89, also known as ANSI C.
+Later standards don't add much and C89 is the widest supported.
+
+One restriction that this implies: no // comments, only /* comments */.
 
 
 USE OF COMMON FUNCTIONS					*style-functions*
@@ -197,7 +212,7 @@ NAMES							*style-names*
 
 Function names can not be more than 31 characters long (because of VMS).
 
-Don't use "delete" as a variable name, C++ doesn't like it.
+Don't use "delete" or "this" as a variable name, C++ doesn't like it.
 
 Because of the requirement that Vim runs on as many systems as possible, we
 need to avoid using names that are already defined by the system.  This is a
@@ -288,8 +303,27 @@ OK:	    do
 		a = 1;
 	    while (cond);
 
+Wrong:	    if (cond) {
+               cmd;
+               cmd;
+	    } else {
+               cmd;
+               cmd;
+	    }
 
-Functions start with:
+OK:	    if (cond)
+            {
+               cmd;
+               cmd;
+	    }
+	    else
+	    {
+               cmd;
+               cmd;
+	    }
+
+Use ANSI (new style) function declarations with the return type on a separate
+indented line.
 
 Wrong:	int function_name(int arg1, int arg2)
 
@@ -299,16 +333,14 @@ OK:	/*
 	 * Return value explanation.
 	 */
 	    int
-	function_name(arg1, arg2)
-	    int		arg1;		/* short comment about arg1 */
-	    int		arg2;		/* short comment about arg2 */
+	function_name(
+	    int		arg1,		/* short comment about arg1 */
+	    int		arg2)		/* short comment about arg2 */
 	{
 	    int		local;		/* comment about local */
 
 	    local = arg1 * arg2;
 
-NOTE: Don't use ANSI style function declarations.  A few people still have to
-use a compiler that doesn't support it.
 
 
 SPACES AND PUNCTUATION					*style-spaces*

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 7.4.  Last change: 2015 Jul 03
+*diff.txt*      For Vim version 7.4.  Last change: 2015 Nov 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -182,8 +182,8 @@ hidden buffers.  You can use ":hide" to close a window without unloading the
 buffer.  If you don't want a buffer to remain used for the diff do ":set
 nodiff" before hiding it.
 
-							*:diffu* *:diffupdate*
-:diffu[pdate][!]		Update the diff highlighting and folds.
+							*:dif* *:diffupdate*
+:dif[fupdate][!]		Update the diff highlighting and folds.
 
 Vim attempts to keep the differences updated when you make changes to the
 text.  This mostly takes care of inserted and deleted lines.  Changes within a

runtime/doc/doctags.c

@@ -14,9 +14,7 @@
 #define LINELEN 200
 
 	int
-main(argc, argv)
-	int		argc;
-	char	**argv;
+main(int argc, char **argv)
 {
 	char	line[LINELEN];
 	char	*p1, *p2;

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 7.4.  Last change: 2015 Aug 25
+*editing.txt*   For Vim version 7.4.  Last change: 2016 Mar 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -78,7 +78,9 @@ g CTRL-G		Prints the current position of the cursor in five
 			than one position on the screen (<Tab> or special
 			character), both the "real" column and the screen
 			column are shown, separated with a dash.
-			See also 'ruler' option.  {not in Vi}
+			Also see the 'ruler' option and the |wordcount()|
+			function.
+			{not in Vi}
 
 							*v_g_CTRL-G*
 {Visual}g CTRL-G	Similar to "g CTRL-G", but Word, Character, Line, and
@@ -391,7 +393,7 @@ These are the common ones:
 To avoid the special meaning of the wildcards prepend a backslash.  However,
 on MS-Windows the backslash is a path separator and "path\[abc]" is still seen
 as a wildcard when "[" is in the 'isfname' option.  A simple way to avoid this
-is to use "path\[[]abc]".  Then the file "path[abc]" literally.
+is to use "path\[[]abc]", this matches the file "path\[abc]".
 
 					*starstar-wildcard*
 Expanding "**" is possible on Unix, Win32, Mac OS/X and a few other systems.
@@ -401,16 +403,21 @@ Note there are some commands where this works slightly differently, see
 Example: >
 	:n **/*.txt
 Finds files:
-	ttt.txt
-	subdir/ttt.txt
-	a/b/c/d/ttt.txt
-When non-wildcard characters are used these are only matched in the first
-directory.  Example: >
-	:n /usr/inc**/*.h
+	aaa.txt ~
+	subdir/bbb.txt ~
+	a/b/c/d/ccc.txt ~
+When non-wildcard characters are used right before or after "**" these are
+only matched in the top directory.  They are not used for directories further
+down in the tree. For example: >
+	:n /usr/inc**/types.h
 Finds files:
-	/usr/include/types.h
-	/usr/include/sys/types.h
-	/usr/inc_old/types.h
+	/usr/include/types.h ~
+	/usr/include/sys/types.h ~
+	/usr/inc/old/types.h ~
+Note that the path with "/sys" is included because it does not need to match
+"/inc".  Thus it's like matching "/usr/inc*/*/*...", not
+"/usr/inc*/inc*/inc*".
+
 					*backtick-expansion* *`-expansion*
 On Unix and a few other systems you can also use backticks for the file name
 argument, for example: >
@@ -637,6 +644,7 @@ list of the current window.
 				:0argadd x	x a b c
 				:1argadd x	a x b c
 				:$argadd x	a b c x
+			And after the last one:
 				:+2argadd y	a b c x y
 			There is no check for duplicates, it is possible to
 			add a file to the argument list twice.
@@ -1008,7 +1016,7 @@ the newly written file (it might be there but contain bogus data).  In that
 case try recovery, because the swap file is synced to disk and might still be
 there. |:recover|
 
-The directories given with the 'backupdir' option is used to put the backup
+The directories given with the 'backupdir' option are used to put the backup
 file in.  (default: same directory as the written file).
 
 Whether the backup is a new file, which is a copy of the original file, or the
@@ -1105,10 +1113,10 @@ The names can be in upper- or lowercase.
 			the last file in the argument list has not been
 			edited.  See |:confirm| and 'confirm'.  {not in Vi}
 
-:q[uit]!		Quit without writing, also when currently visible
-			buffers have changes.  Does not exit when this is the
-			last window and there is a changed hidden buffer.
-			In this case, the first changed hidden buffer becomes
+:q[uit]!		Quit without writing, also when the current buffer has
+			changes.  If this is the last window and there is a
+			modified hidden buffer, the current buffer is
+			abandoned and the first changed hidden buffer becomes
 			the current buffer.
 			Use ":qall!" to exit always.
 
@@ -1213,7 +1221,7 @@ Examples: >
 
 If you want to always use ":confirm", set the 'confirm' option.
 
-			*:browse* *:bro* *E338* *E614* *E615* *E616* *E578*
+			*:browse* *:bro* *E338* *E614* *E615* *E616*
 :bro[wse] {command}	Open a file selection dialog for an argument to
 			{command}.  At present this works for |:e|, |:w|,
 			|:wall|, |:wq|, |:wqall|, |:x|, |:xall|, |:exit|,
@@ -1456,6 +1464,18 @@ using zip, "[blowfish]" when using blowfish, etc.
 When writing an undo file, the same key and method will be used for the text
 in the undo file. |persistent-undo|.
 
+To test for blowfish support you can use these conditions: >
+	has('crypt-blowfish')
+	has('crypt-blowfish2')
+This works since Vim 7.4.1099 while blowfish support was added earlier.
+Thus the condition failing doesn't mean blowfish is not supported. You can
+test for blowfish with: >
+	v:version >= 703
+And for blowfish2 with: >
+	v:version > 704 || (v:version == 704 && has('patch401'))
+If you are sure Vim includes patch 7.4.237 a simpler check is: >
+	has('patch-7.4.401')
+<
 						*E817* *E818* *E819* *E820*
 When encryption does not work properly, you would be able to write your text
 to a file and never be able to read it back.  Therefore a test is performed to

runtime/doc/farsi.txt

@@ -1,4 +1,4 @@
-*farsi.txt*     For Vim version 7.4.  Last change: 2010 Aug 07
+*farsi.txt*     For Vim version 7.4.  Last change: 2015 Aug 29
 
 
 		  VIM REFERENCE MANUAL    by Mortaza Ghassab Shiran
@@ -59,7 +59,7 @@ o  Toggling between Farsi ISIR-3342 standard encoding and Vim Farsi via F9
    right-to-left mode, this function is also supported only in right-to-left
    mode.
 
-Farsi Fonts					*farsi fonts*
+Farsi Fonts					*farsi-fonts*
 -----------
 
 The following files are found in the subdirectories of the '$VIM/farsi/fonts'

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 7.4.  Last change: 2013 Dec 15
+*filetype.txt*  For Vim version 7.4.  Last change: 2016 May 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -552,7 +552,7 @@ Local mappings:
 	to the end of the file in Normal mode.  This means "> " is inserted in
 	each line.
 
-MAN							*ft-man-plugin* *:Man*
+MAN					*ft-man-plugin* *:Man* *man.vim*
 
 Displays a manual page in a nice way.  Also see the user manual
 |find-manpage|.
@@ -577,7 +577,53 @@ Global mapping:
 Local mappings:
 CTRL-]		Jump to the manual page for the word under the cursor.
 CTRL-T		Jump back to the previous manual page.
+q		Same as ":quit"
 
+To enable folding use this: >
+  	let g:ft_man_folding_enable = 1
+If you do not like the default folding, use an autocommand to add your desired
+folding style instead.  For example: >
+        autocmd FileType man setlocal foldmethod=indent foldenable
+
+You may also want to set 'keywordprg' to make the |K| command open a manual
+page in a Vim window: >
+	set keywordprg=:Man
+
+
+MANPAGER				      *manpager.vim*
+
+The :Man command allows you to turn Vim into a manpager (that syntax highlights
+manpages and follows linked manpages on hitting CTRL-]).
+
+Works on:
+
+  - Linux
+  - Mac OS
+  - FreeBSD
+  - Cygwin
+  - Win 10 under Bash
+
+Untested:
+
+  - Amiga OS
+  - BeOS
+  - OS/2
+
+For bash,zsh,ksh or dash by adding to the config file (.bashrc,.zshrc, ...)
+
+	export MANPAGER="env MAN_PN=1 vim -M +MANPAGER -"
+
+For (t)csh by adding to the config file
+
+	setenv MANPAGER "env MAN_PN=1 vim -M +MANPAGER -"
+
+For fish by adding to the config file
+
+	set -x MANPAGER "env MAN_PN=1 vim -M +MANPAGER -"
+
+If man sets the $MAN_PN environment variable, like man-db, the most common
+implementation on Linux and Mac OS, then the "env MAN_PN=1 " part above is
+superfluous.
 
 PDF							*ft-pdf-plugin*
 

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 7.4.  Last change: 2013 Dec 04
+*fold.txt*      For Vim version 7.4.  Last change: 2016 Jan 02
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -97,9 +97,9 @@ These are the conditions with which the expression is evaluated:
 			lowest.
   "="			use fold level from the previous line
   "a1", "a2", ..	add one, two, .. to the fold level of the previous
-			line
+			line, use the result for the current line
   "s1", "s2", ..	subtract one, two, .. from the fold level of the
-			previous line
+			previous line, use the result for the next line
   "<1", "<2", ..	a fold with this level ends at this line
   ">1", ">2", ..	a fold with this level starts at this line
 
@@ -122,6 +122,18 @@ method can be very slow!
 Try to avoid the "=", "a" and "s" return values, since Vim often has to search
 backwards for a line for which the fold level is defined.  This can be slow.
 
+An example of using "a1" and "s1": For a multi-line C comment, a line
+containing "/*" would return "a1" to start a fold, and a line containing "*/"
+would return "s1" to end the fold after that line: >
+  if match(thisline, '/\*') >= 0
+    return 'a1'
+  elseif match(thisline, '\*/') >= 0
+    return 's1'
+  else
+    return '='
+  endif
+However, this won't work for single line comments, strings, etc.
+
 |foldlevel()| can be useful to compute a fold level relative to a previous
 fold level.  But note that foldlevel() may return -1 if the level is not known
 yet.  And it returns the level at the start of the line, while a fold might
@@ -573,8 +585,9 @@ what you type!
 When using an operator, a closed fold is included as a whole.  Thus "dl"
 deletes the whole closed fold under the cursor.
 
-For Ex commands the range is adjusted to always start at the first line of a
-closed fold and end at the last line of a closed fold.  Thus this command: >
+For Ex commands that work on buffer lines the range is adjusted to always
+start at the first line of a closed fold and end at the last line of a closed
+fold.  Thus this command: >
 	:s/foo/bar/g
 when used with the cursor on a closed fold, will replace "foo" with "bar" in
 all lines of the fold.

runtime/doc/gui.txt

@@ -25,7 +25,7 @@ Other GUI documentation:
 
 First you must make sure you actually have a version of Vim with the GUI code
 included.  You can check this with the ":version" command, it says "with xxx
-GUI", where "xxx" is X11-Motif, X11-Athena, Photon, GTK, GTK2, etc., or
+GUI", where "xxx" is X11-Motif, X11-Athena, Photon, GTK2, GTK3, etc., or
 "MS-Windows 32 bit GUI version".
 
 How to start the GUI depends on the system used.  Mostly you can run the
@@ -514,11 +514,14 @@ a menu entry.  Hit <Enter> to execute it.  Hit <Esc> if you want to cancel.
 This does require the |+menu| feature enabled at compile time.
 
 							*tear-off-menus*
-GTK+ and Motif support Tear-off menus.  These are sort of sticky menus or
+GTK+ 2 and Motif support Tear-off menus.  These are sort of sticky menus or
 pop-up menus that are present all the time.  If the resizing does not work
 correctly, this may be caused by using something like "Vim*geometry" in the
 defaults.  Use "Vim.geometry" instead.
 
+As to GTK+ 3, tear-off menus have been deprecated since GTK+ 3.4.
+Accordingly, they are disabled if gvim is linked against GTK+ 3.4 or later.
+
 The Win32 GUI version emulates Motif's tear-off menus.  Actually, a Motif user
 will spot the differences easily, but hopefully they're just as useful.  You
 can also use the |:tearoff| command together with |hidden-menus| to create
@@ -650,8 +653,8 @@ When no or zero priority is given, 500 is used.
 The priority for the PopUp menu is not used.
 
 The Help menu will be placed on the far right side of the menu bar on systems
-which support this (Motif and GTK+).  For GTK+ 2, this is not done anymore
-because right-aligning the Help menu is now discouraged UI design.
+which support this (Motif and GTK+).  For GTK+ 2 and 3, this is not done
+anymore because right-aligning the Help menu is now discouraged UI design.
 
 You can use a priority higher than 9999, to make it go after the Help menu,
 but that is non-standard and is discouraged.  The highest possible priority is

runtime/doc/gui_w16.txt

@@ -1,186 +0,0 @@
-*gui_w16.txt*   For Vim version 7.4.  Last change: 2005 Mar 29
-
-
-		  VIM REFERENCE MANUAL    by Bram Moolenaar
-
-
-Vim's Graphical User Interface				*gui-w16* *win16-gui*
-
-1. Starting the GUI		|win16-start|
-2. Vim as default editor	|win16-default-editor|
-3. Using the clipboard		|win16-clipboard|
-4. Shell Commands		|win16-shell|
-5. Special colors		|win16-colors|
-6. Windows dialogs & browsers	|win16-dialogs|
-7. Various			|win16-various|
-
-Other relevant documentation:
-|gui.txt|	For generic items of the GUI.
-|os_msdos.txt|	For items common to DOS and Windows.
-|gui_w32.txt|	Some items here are also applicable to the Win16 version.
-
-{Vi does not have a Windows GUI}
-
-The Win16 version of Vim will run on Windows 3.1 or later.  It has not been
-tested on 3.0, it probably won't work without being recompiled and
-modified.  (But you really should upgrade to 3.11 anyway. :)
-
-In most respects it behaves identically to the Win32 GUI version, including
-having a flat-style toolbar(!).  The chief differences:
-
-1) Bold/Italic text is not available, to speed up repaint/reduce resource
-   usage.  (You can re-instate this by undefining MSWIN16_FASTTEXT.)
-2) No tearoff menu emulation.
-3) No OLE interface.
-4) No long filename support (of course).
-5) No tooltips on toolbar buttons - instead they produce command-line tips
-   like menu items do.
-6) Line length limited to 32767 characters (like 16-bit DOS version).
-
-
-==============================================================================
-1. Starting the GUI					*win16-start*
-
-The Win16 GUI version of Vim will always start the GUI, no matter how you
-start it or what it's called.  There is no 'console' version as such, but you
-can use one of the DOS versions in a DOS box.
-
-The Win16 GUI has an extra menu item:  "Window/Select Font".  It brings up the
-standard Windows font selector.  Note that bold and italic fonts are not
-supported in an attempt to maximize GDI drawing speed.
-
-Setting the menu height doesn't work for the Win16 GUI.
-
-							*win16-maximized*
-If you want Vim to start with a maximized window, add this command to your
-vimrc or gvimrc file: >
-	au GUIEnter * simalt ~x
-<
-
-There is a specific version of gvim.exe that runs under the Win32s subsystem
-of Windows 3.1 or 3.11.  See |win32s|.
-
-==============================================================================
-2. Vim as default editor				*win16-default-editor*
-
-To set Vim as the default editor for a file type you can use File Manager's
-"Associate" feature.
-
-When you open a file in Vim by double clicking it, Vim changes to that
-file's directory.
-
-See also |notepad|.
-
-==============================================================================
-3. Using the clipboard					*win16-clipboard*
-
-Windows has a clipboard, where you can copy text to, and paste text from.  Vim
-supports this in several ways.
-The clipboard works in the same way as the Win32 version: see |gui-clipboard|.
-
-==============================================================================
-4. Shell Commands					*win16-shell*
-
-Vim spawns a DOS window for external commands, to make it possible to run any
-DOS command.  The window uses the _default.pif settings.
-
-							*win16-!start*
-Normally, Vim waits for a command to complete before continuing (this makes
-sense for most shell commands which produce output for Vim to use).  If you
-want Vim to start a program and return immediately, you can use the following
-syntax:
-	:!start {command}
-This may only work for a Windows program though.
-Don't forget that you must tell Windows 3.1x to keep executing a DOS command
-in the background while you switch back to Vim.
-
-==============================================================================
-5. Special colors					*win16-colors*
-
-On Win16, the normal DOS colors can be used.  See |dos-colors|.
-
-Additionally the system configured colors can also be used.  These are known
-by the names Sys_XXX, where XXX is the appropriate system color name, from the
-following list (see the Win32 documentation for full descriptions).  Case is
-ignored.
-
-Sys_BTNFace		Sys_BTNShadow			Sys_ActiveBorder
-Sys_ActiveCaption	Sys_AppWorkspace		Sys_Background
-Sys_BTNText		Sys_CaptionText			Sys_GrayText
-Sys_Highlight		Sys_HighlightText		Sys_InactiveBorder
-Sys_InactiveCaption	Sys_InactiveCaptionText		Sys_Menu
-Sys_MenuText		Sys_ScrollBar			Sys_Window
-Sys_WindowFrame		Sys_WindowText
-
-Probably the most useful values are
-	Sys_Window	    Normal window background
-	Sys_WindowText      Normal window text
-	Sys_Highlight       Highlighted background
-	Sys_HighlightText   Highlighted text
-
-These extra colors are also available:
-Gray, Grey, LightYellow, SeaGreen, Orange, Purple, SlateBlue, Violet,
-
-
-See also |rgb.txt|.
-
-==============================================================================
-						*win16-dialogs*
-6. Windows dialogs & browsers
-
-The Win16 GUI can use familiar Windows components for some operations, as well
-as the traditional interface shared with the console version.
-
-
-6.1 Dialogs
-
-The dialogs displayed by the "confirm" family (i.e. the 'confirm' option,
-|:confirm| command and |confirm()| function) are GUI-based rather than the
-console-based ones used by other versions.  There is no option to change this.
-
-
-6.2 File Browsers
-
-When prepending ":browse" before file editing commands, a file requester is
-used to allow you to select an existing file.  See |:browse|.
-
-
-==============================================================================
-7. Various						*win16-various*
-
-							*win16-printing*
-The "File/Print" menu uses Notepad to print the current buffer.  This is a bit
-clumsy, but it's portable.  If you want something else, you can define your
-own print command.  For example, you could look for the 16-bit version of
-PrintFile.  See $VIMRUNTIME/menu.vim for how it works by default.
-
-Using this should also work: >
-	:w >>prn
-
-Vim supports a number of standard MS Windows features.  Some of these are
-detailed elsewhere: see |'mouse'|, |win32-hidden-menus|.
-Also see |:simalt|
-
-							*win16-drag-n-drop*
-You can drag and drop one or more files into the vim window, where they will
-be opened as normal.  If you hold down Shift while doing this, Vim changes to
-the (first) dropped file's directory.  If you hold Ctrl, Vim will always split
-a new window for the file.  Otherwise it's only done if the current buffer has
-been changed.
-You can also drop a directory's icon, but rather than open all files in the
-directory (which wouldn't usually be what you want) Vim instead changes to
-that directory and begins a new file.
-If Vim happens to be editing a command line, the names of the dropped files
-and directories will be inserted at the cursor.  This allows you to use these
-names with any Ex command.
-
-							*win16-truetype*
-It is recommended that you use a raster font and not a TrueType
-fixed-pitch font.  E.g. use Courier, not Courier New.  This is not just
-to use less resources but because there are subtle bugs in the
-handling of fixed-pitch TrueType in Win3.1x.  In particular, when you move
-a block cursor over a pipe character '|', the cursor is drawn in the wrong
-size and bits get left behind.  This is a bug in the Win3.1x GDI, it doesn't
-happen if you run the exe under 95/NT.
-
- vim:tw=78:sw=4:ts=8:ft=help:norl:

runtime/doc/gui_x11.txt

@@ -1,4 +1,4 @@
-*gui_x11.txt*   For Vim version 7.4.  Last change: 2014 Mar 08
+*gui_x11.txt*   For Vim version 7.4.  Last change: 2016 Apr 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -305,7 +305,7 @@ If a name is used that exists on other systems, but not in X11, the default
 "arrow" pointer is used.
 
 ==============================================================================
-5. GTK version						*gui-gtk* *GTK+* *GTK*
+5. GTK version					*gui-gtk* *GTK+* *GTK* *GTK3*
 
 The GTK version of the GUI works a little bit different.
 
@@ -369,6 +369,16 @@ Write this in the file ~/.gtkrc and it will be used by GTK+.  For GTK+ 2
 you might have to use the file ~/.gtkrc-2.0 instead, depending on your
 distribution.
 
+For GTK+ 3, an effect similar to the above can be obtained by adding the
+following snippet of CSS code to $XDG_HOME_DIR/gtk-3.0/gtk.css (usually,
+$HOME/.config/gtk-3.0/gtk.css):
+ >
+	.tooltip {
+		background-color: #ffffcc;
+		color: #000000;
+	}
+<
+
 Using Vim as a GTK+ plugin				*gui-gtk-socketid*
 
 When the GTK+ version of Vim starts up normally, it creates its own top level

runtime/doc/hangulin.txt

@@ -1,11 +1,8 @@
-*hangulin.txt*  For Vim version 7.4.  Last change: 2009 Jun 24
+*hangulin.txt*  For Vim version 7.4.  Last change: 2015 Nov 24
 
 
 		  VIM REFERENCE MANUAL    by Chi-Deok Hwang and Sung-Hyun Nam
 
-NOTE: The |+hangul_input| feature is scheduled to be removed.  If you want to
-keep it, please send a message to the Vim user maillist.
-
 
 Introduction					*hangul*
 ------------
@@ -17,7 +14,8 @@ Compile
 -------
 Next is a basic option.  You can add any other configure option. >
 
-   ./configure --with-x --enable-multibyte --enable-fontset --enable-hangulinput
+   ./configure --with-x --enable-multibyte --enable-hangulinput \
+            --disable-xim
 
 And you should check feature.h.  If |+hangul_input| feature is enabled
 by configure, you can select more options such as keyboard type, 2 bulsik
@@ -26,18 +24,21 @@ or 3 bulsik.  You can find keywords like next in there. >
 	#define HANGUL_DEFAULT_KEYBOARD 2
 	#define ESC_CHG_TO_ENG_MODE
 	/* #define X_LOCALE */
-	/* #define SLOW_XSERVER */
 
 Environment variables
 ---------------------
-You should set LANG variable to Korean locale such as ko or ko_KR.euc.
+You should set LANG variable to Korean locale such as ko, ko_KR.eucKR
+or ko_KR.UTF-8.
 If you set LC_ALL variable, it should be set to Korean locale also.
 
 VIM resource
 ------------
-You should add nexts to your global vimrc ($HOME/.vimrc). >
+You may want to set 'encoding' and 'fileencodings'.
+Next are examples: >
 
-	:set fileencoding=korea
+	:set encoding=euc-kr
+	:set encoding=utf-8
+	:set fileencodings=ucs-bom,utf-8,cp949,euc-kr,latin1
 
 Keyboard
 --------
@@ -52,8 +53,16 @@ If both are set, VIM_KEYBOARD has higher priority.
 
 Hangul Fonts
 ------------
-You can set text font using $HOME/.Xdefaults or in your gvimrc file.
-But to use Hangul, you should set 'guifontset' in your vimrc.
+If you use GTK version of GVIM, you should set 'guifont' and 'guifontwide'.
+For example: >
+    set guifont=Courier\ 12
+    set guifontwide=NanumGothicCoding\ 12
+
+If you use Motif or Athena version of GVIM, you should set 'guifontset' in
+your vimrc.  You can set fontset in the .Xdefaults file.
+
+$HOME/.gvimrc: >
+    set guifontset=english_font,hangul_font
 
 $HOME/.Xdefaults: >
     Vim.font: english_font
@@ -66,40 +75,38 @@ $HOME/.Xdefaults: >
     *international: True
     Vim*fontList: english_font;hangul_font:
 
-$HOME/.gvimrc: >
-    set guifontset=english_font,hangul_font
-
 attention! the , (comma) or ; (semicolon)
 
 And there should be no ':set guifont'.  If it exists, then Gvim ignores
 ':set guifontset'.  It means VIM runs without fontset supporting.
 So, you can see only English.  Hangul does not be correctly displayed.
 
-After 'fontset' feature is enabled, VIM does not allow using 'font'.
+After 'fontset' feature is enabled, VIM does not allow using english
+font only in 'font' setting for syntax.
 For example, if you use >
    :set guifontset=eng_font,your_font
 in your .gvimrc, then you should do for syntax >
    :hi Comment guifg=Cyan font=another_eng_font,another_your_font
 If you just do >
    :hi Comment font=another_eng_font
-then you can see a GOOD error message.  Be careful!
+then you can see a error message.  Be careful!
 
 hangul_font width should be twice than english_font width.
 
 Unsupported Feature
 -------------------
-Johab font not yet supported.  And I don't have any plan.
-If you really want to use johab font, you can use the
-hanguldraw.c in gau package.
+We don't support Johab font.
+We don't support Hanja input.
+And We don't have any plan to support them.
 
-Hanja input not yet supported.  And I don't have any plan.
-If you really want to input hanja, just use VIM with hanterm.
+If you really need such features, you can use console version of VIM with a
+capable terminal emulator.
 
 Bug or Comment
 --------------
 Send comments, patches and suggestions to:
 
-				    Chi-Deok Hwang <hwang@mizi.co.kr>
 				    SungHyun Nam <goweol@gmail.com>
+				    Chi-Deok Hwang <...>
 
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 7.4.  Last change: 2015 Jun 21
+*help.txt*	For Vim version 7.4.  Last change: 2016 Mar 31
 
 			VIM - main help file
 									 k
@@ -10,14 +10,14 @@ Close this window:  Use ":q<Enter>".
 Jump to a subject:  Position the cursor on a tag (e.g. |bars|) and hit CTRL-].
    With the mouse:  ":set mouse=a" to enable the mouse (in xterm or GUI).
 		    Double-click the left mouse button on a tag, e.g. |bars|.
-	Jump back:  Type CTRL-T or CTRL-O (repeat to go further back).
+	Jump back:  Type CTRL-T or CTRL-O.  Repeat to go further back.
 
 Get specific help:  It is possible to go directly to whatever you want help
 		    on, by giving an argument to the |:help| command.
-		    It is possible to further specify the context:
-							*help-context*
+		    Prepend something to specify the context:  *help-context*
+
 			  WHAT			PREPEND    EXAMPLE	~
-		      Normal mode command      (nothing)   :help x
+		      Normal mode command		   :help x
 		      Visual mode command	  v_	   :help v_u
 		      Insert mode command	  i_	   :help i_<Esc>
 		      Command-line command	  :	   :help :quit
@@ -25,6 +25,8 @@ Get specific help:  It is possible to go directly to whatever you want help
 		      Vim command argument	  -	   :help -r
 		      Option			  '	   :help 'textwidth'
 		      Regular expression	  /	   :help /[
+		    See |help-summary| for more contexts and an explanation.
+
   Search for help:  Type ":help word", then hit CTRL-D to see matching
 		    help entries for "word".
 		    Or use ":helpgrep word". |:helpgrep|
@@ -153,7 +155,6 @@ Special issues ~
 
 GUI ~
 |gui.txt|	Graphical User Interface (GUI)
-|gui_w16.txt|	Windows 3.1 GUI
 |gui_w32.txt|	Win32 GUI
 |gui_x11.txt|	X11 GUI
 
@@ -163,7 +164,6 @@ Interfaces ~
 |if_mzsch.txt|	MzScheme interface
 |if_perl.txt|	Perl interface
 |if_pyth.txt|	Python interface
-|if_sniff.txt|	SNiFF+ interface
 |if_tcl.txt|	Tcl interface
 |if_ole.txt|	OLE automation interface for Win32
 |if_ruby.txt|	Ruby interface
@@ -178,6 +178,7 @@ Versions ~
 |version5.txt|	Differences between Vim version 4.6 and 5.x
 |version6.txt|	Differences between Vim version 5.7 and 6.x
 |version7.txt|	Differences between Vim version 6.4 and 7.x
+|version8.txt|	Differences between Vim version 7.4 and 8.x
 						*sys-file-list*
 Remarks about specific systems ~
 |os_390.txt|	OS/390 Unix

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 7.4.  Last change: 2014 Sep 19
+*helphelp.txt*	For Vim version 7.4.  Last change: 2016 Apr 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -197,6 +197,9 @@ command: >
 				*E154* *E150* *E151* *E152* *E153* *E670*
 :helpt[ags] [++t] {dir}
 			Generate the help tags file(s) for directory {dir}.
+			When {dir} is ALL then all "doc" directories in
+			'runtimepath' will be used.
+
 			All "*.txt" and "*.??x" files in the directory and
 			sub-directories are scanned for a help tag definition
 			in between stars.  The "*.??x" files are for
@@ -205,9 +208,11 @@ command: >
 			sorted.
 			When there are duplicates an error message is given.
 			An existing tags file is silently overwritten.
+
 			The optional "++t" argument forces adding the
 			"help-tags" tag.  This is also done when the {dir} is
 			equal to $VIMRUNTIME/doc.
+
 			To rebuild the help tags in the runtime directory
 			(requires write permission there): >
 				:helptags $VIMRUNTIME/doc
@@ -258,7 +263,9 @@ The second one finds the English user manual, even when 'helplang' is set to
 
 When using command-line completion for the ":help" command, the "@en"
 extension is only shown when a tag exists for multiple languages.  When the
-tag only exists for English "@en" is omitted.
+tag only exists for English "@en" is omitted.  When the first candidate has an
+"@ab" extension and it matches the first language in 'helplang' "@ab" is also
+omitted.
 
 When using |CTRL-]| or ":help!" in a non-English help file Vim will try to
 find the tag in the same language.  If not found then 'helplang' will be used
@@ -315,6 +322,10 @@ aligned on a line.
 When referring to an existing help tag and to create a hot-link, place the
 name between two bars (|) eg. |help-writing|.
 
+When referring to a Vim command and to create a hot-link, place the
+name between two backticks, eg. inside `:filetype`.  You will see this is
+highlighted as a command, like a code block (see below).
+
 When referring to a Vim option in the help file, place the option name between
 two single quotes, eg. 'statusline'
 

runtime/doc/if_cscop.txt

@@ -97,8 +97,8 @@ command does the same and also splits the window (short: "scs").
 
 The available subcommands are:
 
-			*E563* *E564* *E566* *E568* *E569* *E622* *E623*
-			*E625* *E626* *E609*
+			*E563* *E564* *E566* *E568* *E622* *E623* *E625*
+			*E626* *E609*
     add   : Add a new cscope database/connection.
 
 	USAGE	:cs add {file|dir} [pre-path] [flags]

runtime/doc/if_lua.txt

@@ -1,4 +1,4 @@
-*if_lua.txt*    For Vim version 7.4.  Last change: 2013 Sep 04
+*if_lua.txt*    For Vim version 7.4.  Last change: 2015 Oct 16
 
 
 		  VIM REFERENCE MANUAL    by Luis Carvalho
@@ -14,6 +14,7 @@ The Lua Interface to Vim				*lua* *Lua*
 6. Buffer userdata		|lua-buffer|
 7. Window userdata		|lua-window|
 8. The luaeval function		|lua-luaeval|
+9. Dynamic loading		|lua-dynamic|
 
 {Vi does not have any of these commands}
 
@@ -399,5 +400,31 @@ Examples: >
 	:echo Rand(1,10)
 
 
+==============================================================================
+9. Dynamic loading				    *lua-dynamic*
+
+On MS-Windows and Unix the Lua library can be loaded dynamically.  The
+|:version| output then includes |+lua/dyn|.
+
+This means that Vim will search for the Lua DLL or shared library file only
+when needed.  When you don't use the Lua interface you don't need it, thus
+you can use Vim without this file.
+
+
+MS-Windows ~
+
+To use the Lua interface the Lua DLL must be in your search path.  In a
+console window type "path" to see what directories are used.  The 'luadll'
+option can be also used to specify the Lua DLL.  The version of the DLL must
+match the Lua version Vim was compiled with.
+
+
+Unix ~
+
+The 'luadll' option can be used to specify the Lua shared library file instead
+of DYNAMIC_LUA_DLL file what was specified at compile time.  The version of
+the shared library must match the Lua version Vim was compiled with.
+
+
 ==============================================================================
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/if_mzsch.txt

@@ -1,4 +1,4 @@
-*if_mzsch.txt*  For Vim version 7.4.  Last change: 2012 Dec 17
+*if_mzsch.txt*  For Vim version 7.4.  Last change: 2016 Jan 24
 
 
 		  VIM REFERENCE MANUAL    by Sergey Khorev
@@ -13,6 +13,7 @@ The MzScheme Interface to Vim				*mzscheme* *MzScheme*
 5. mzeval() Vim function		|mzscheme-mzeval|
 6. Using Function references		|mzscheme-funcref|
 7. Dynamic loading			|mzscheme-dynamic|
+8. MzScheme setup			|mzscheme-setup|
 
 {Vi does not have any of these commands}
 
@@ -264,7 +265,7 @@ directly from Scheme. For instance: >
 <
 
 ==============================================================================
-7. Dynamic loading				    *mzscheme-dynamic* *E815*
+7. Dynamic loading				*mzscheme-dynamic* *E815*
 
 On MS-Windows the MzScheme libraries can be loaded dynamically. The |:version|
 output then includes |+mzscheme/dyn|.
@@ -272,6 +273,9 @@ output then includes |+mzscheme/dyn|.
 This means that Vim will search for the MzScheme DLL files only when needed.
 When you don't use the MzScheme interface you don't need them, thus you can
 use Vim without these DLL files.
+NOTE: Newer version of MzScheme (Racket) require earlier (trampolined)
+initialisation via scheme_main_setup.  So Vim always loads the MzScheme DLL at
+startup if possible.
 
 To use the MzScheme interface the MzScheme DLLs must be in your search path.
 In a console window type "path" to see what directories are used.
@@ -282,5 +286,24 @@ For MzScheme version 209 they will be "libmzsch209_000.dll" and
 command, look for -DDYNAMIC_MZSCH_DLL="something" and
 -DDYNAMIC_MZGC_DLL="something" in the "Compilation" info.
 
+For example, if MzScheme (Racket) is installed at C:\Racket63, you may need
+to set the environment variable as the following: >
+
+  PATH=%PATH%;C:\Racket63\lib
+  PLTCOLLECTS=C:\Racket63\collects
+  PLTCONFIGDIR=C:\Racket63\etc
+<
+==============================================================================
+8. MzScheme setup				    *mzscheme-setup* *E895*
+
+Vim requires "racket/base" module for if_mzsch core (fallback to "scheme/base"
+if it doesn't exist), "r5rs" module for test and "raco ctool" command for
+building Vim.  If MzScheme did not have them, you can install them with
+MzScheme's raco command:
+>
+  raco pkg install scheme-lib       # scheme/base module
+  raco pkg install r5rs-lib         # r5rs module
+  raco pkg install cext-lib         # raco ctool command
+<
 ======================================================================
   vim:tw=78:ts=8:sts=4:ft=help:norl:

runtime/doc/if_perl.txt

@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 7.4.  Last change: 2013 Oct 05
+*if_perl.txt*   For Vim version 7.4.  Last change: 2015 Oct 16
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege
@@ -284,11 +284,20 @@ used for building Vim.
 To use the Perl interface the Perl DLL must be in your search path.
 If Vim reports it cannot find the perl512.dll, make sure your $PATH includes
 the directory where it is located.  The Perl installer normally does that.
-In a console window type "path" to see what directories are used.
+In a console window type "path" to see what directories are used.  The
+'perldll' option can be also used to specify the Perl DLL.
 
 The name of the DLL must match the Perl version Vim was compiled with.
 Currently the name is "perl512.dll".  That is for Perl 5.12.  To know for
 sure edit "gvim.exe" and search for "perl\d*.dll\c".
 
+
+Unix ~
+
+The 'perldll' option can be used to specify the Perl shared library file
+instead of DYNAMIC_PERL_DLL file what was specified at compile time.  The
+version of the shared library must match the Perl version Vim was compiled
+with.
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 7.4.  Last change: 2014 Jul 23
+*if_pyth.txt*   For Vim version 7.4.  Last change: 2015 Nov 10
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -653,10 +653,37 @@ vim.List object					*python-List*
         class List(vim.List):		# Subclassing
 
 vim.Function object				*python-Function*
-    Function-like object, acting like vim |Funcref| object. Supports `.name` 
-    attribute and is callable. Accepts special keyword argument `self`, see 
-    |Dictionary-function|. You can also use `vim.Function(name)` constructor, 
-    it is the same as `vim.bindeval('function(%s)'%json.dumps(name))`.
+    Function-like object, acting like vim |Funcref| object. Accepts special 
+    keyword argument `self`, see |Dictionary-function|. You can also use 
+    `vim.Function(name)` constructor, it is the same as 
+    `vim.bindeval('function(%s)'%json.dumps(name))`.
+
+    Attributes (read-only):
+        Attribute    Description ~
+        name         Function name.
+        args         `None` or a |python-List| object with arguments.  Note 
+                     that this is a copy of the arguments list, constructed 
+                     each time you request this attribute. Modifications made 
+                     to the list will be ignored (but not to the containers 
+                     inside argument list: this is like |copy()| and not 
+                     |deepcopy()|).
+        self         `None` or a |python-Dictionary| object with self 
+                     dictionary. Note that explicit `self` keyword used when 
+                     calling resulting object overrides this attribute.
+        auto_rebind  Boolean. True if partial created from this Python object 
+                     and stored in the VimL dictionary should be automatically 
+                     rebound to the dictionary it is stored in when this 
+                     dictionary is indexed. Exposes Vim internal difference 
+                     between `dict.func` (auto_rebind=True) and 
+                     `function(dict.func,dict)` (auto_rebind=False). This 
+                     attribute makes no sense if `self` attribute is `None`.
+
+    Constructor additionally accepts `args`, `self` and `auto_rebind` 
+    keywords.  If `args` and/or `self` argument is given then it constructs 
+    a partial, see |function()|.  `auto_rebind` is only used when `self` 
+    argument is given, otherwise it is assumed to be `True` regardless of 
+    whether it was given or not.  If `self` is given then it defaults to 
+    `False`.
 
     Examples: >
         f = vim.Function('tr')			# Constructor
@@ -670,6 +697,11 @@ vim.Function object				*python-Function*
         print f(self={})			# Like call('DictFun', [], {})
         print isinstance(f, vim.Function)	# True
 
+        p = vim.Function('DictFun', self={})
+        print f()
+        p = vim.Function('tr', args=['abc', 'a'])
+        print f('b')
+
 ==============================================================================
 8. pyeval() and py3eval() Vim functions			*python-pyeval*
 
@@ -679,20 +711,32 @@ functions to evaluate Python expressions and pass their values to VimL.
 ==============================================================================
 9. Dynamic loading					*python-dynamic*
 
-On MS-Windows the Python library can be loaded dynamically.  The |:version|
-output then includes |+python/dyn|.
+On MS-Windows and Unix the Python library can be loaded dynamically.  The
+|:version| output then includes |+python/dyn| or |+python3/dyn|.
 
-This means that Vim will search for the Python DLL file only when needed.
-When you don't use the Python interface you don't need it, thus you can use
-Vim without this DLL file.
+This means that Vim will search for the Python DLL or shared library file only
+when needed.  When you don't use the Python interface you don't need it, thus
+you can use Vim without this file.
+
+
+MS-Windows ~
 
 To use the Python interface the Python DLL must be in your search path.  In a
-console window type "path" to see what directories are used.
+console window type "path" to see what directories are used.  The 'pythondll'
+or 'pythonthreedll' option can be also used to specify the Python DLL.
 
 The name of the DLL must match the Python version Vim was compiled with.
 Currently the name is "python24.dll".  That is for Python 2.4.  To know for
 sure edit "gvim.exe" and search for "python\d*.dll\c".
 
+
+Unix ~
+
+The 'pythondll' or 'pythonthreedll' option can be used to specify the Python
+shared library file instead of DYNAMIC_PYTHON_DLL or DYNAMIC_PYTHON3_DLL file
+what were specified at compile time.  The version of the shared library must
+match the Python 2.x or Python 3 version Vim was compiled with.
+
 ==============================================================================
 10. Python 3						*python3*
 
@@ -702,7 +746,7 @@ if the `:py3` command is working: >
 	:py3 print("Hello")
 <							*:py3file*
 The `:py3file` command works similar to `:pyfile`.
-							*:py3do* *E863*
+							*:py3do*
 The `:py3do` command works similar to `:pydo`.
 
 

runtime/doc/if_ruby.txt

@@ -1,4 +1,4 @@
-*if_ruby.txt*   For Vim version 7.4.  Last change: 2015 Feb 22
+*if_ruby.txt*   For Vim version 7.4.  Last change: 2015 Dec 03
 
 
 		  VIM REFERENCE MANUAL    by Shugo Maeda
@@ -7,9 +7,9 @@ The Ruby Interface to Vim				*ruby* *Ruby*
 
 
 1. Commands			|ruby-commands|
-2. The VIM module		|ruby-vim|
-3. VIM::Buffer objects		|ruby-buffer|
-4. VIM::Window objects		|ruby-window|
+2. The Vim module		|ruby-vim|
+3. Vim::Buffer objects		|ruby-buffer|
+4. Vim::Window objects		|ruby-window|
 5. Global variables		|ruby-globals|
 6. Dynamic loading		|ruby-dynamic|
 
@@ -47,7 +47,7 @@ Example Vim script: >
 	ruby << EOF
 	class Garnet
 		def initialize(s)
-			@buffer = VIM::Buffer.current
+			@buffer = Vim::Buffer.current
 			vimputs(s)
 		end
 		def vimputs(s)
@@ -74,19 +74,19 @@ Example Vim script: >
 Executing Ruby commands is not possible in the |sandbox|.
 
 ==============================================================================
-2. The VIM module					*ruby-vim*
+2. The Vim module					*ruby-vim*
 
-Ruby code gets all of its access to vim via the "VIM" module.
+Ruby code gets all of its access to vim via the "Vim" module.
 
-Overview >
+Overview: >
 	print "Hello"			      # displays a message
-	VIM.command(cmd)		      # execute an Ex command
-	num = VIM::Window.count		      # gets the number of windows
-	w = VIM::Window[n]		      # gets window "n"
-	cw = VIM::Window.current	      # gets the current window
-	num = VIM::Buffer.count		      # gets the number of buffers
-	b = VIM::Buffer[n]		      # gets buffer "n"
-	cb = VIM::Buffer.current	      # gets the current buffer
+	Vim.command(cmd)		      # execute an Ex command
+	num = Vim::Window.count		      # gets the number of windows
+	w = Vim::Window[n]		      # gets window "n"
+	cw = Vim::Window.current	      # gets the current window
+	num = Vim::Buffer.count		      # gets the number of buffers
+	b = Vim::Buffer[n]		      # gets buffer "n"
+	cb = Vim::Buffer.current	      # gets the current buffer
 	w.height = lines		      # sets the window height
 	w.cursor = [row, col]		      # sets the window cursor position
 	pos = w.cursor			      # gets an array [row, col]
@@ -96,29 +96,29 @@ Overview >
 	b[n] = str			      # sets a line in the buffer
 	b.delete(n)			      # deletes a line
 	b.append(n, str)		      # appends a line after n
-	line = VIM::Buffer.current.line       # gets the current line
-	num = VIM::Buffer.current.line_number # gets the current line number
-	VIM::Buffer.current.line = "test"     # sets the current line number
+	line = Vim::Buffer.current.line       # gets the current line
+	num = Vim::Buffer.current.line_number # gets the current line number
+	Vim::Buffer.current.line = "test"     # sets the current line number
 <
 
 Module Functions:
 
 							*ruby-message*
-VIM::message({msg})
+Vim::message({msg})
 	Displays the message {msg}.
 
 							*ruby-set_option*
-VIM::set_option({arg})
+Vim::set_option({arg})
 	Sets a vim option.  {arg} can be any argument that the ":set" command
 	accepts.  Note that this means that no spaces are allowed in the
 	argument!  See |:set|.
 
 							*ruby-command*
-VIM::command({cmd})
+Vim::command({cmd})
 	Executes Ex command {cmd}.
 
 							*ruby-evaluate*
-VIM::evaluate({expr})
+Vim::evaluate({expr})
 	Evaluates {expr} using the vim internal expression evaluator (see
 	|expression|).  Returns the expression result as:
 	- a Integer if the Vim expression evaluates to a number
@@ -129,9 +129,9 @@ VIM::evaluate({expr})
 	Dictionaries and lists are recursively expanded.
 
 ==============================================================================
-3. VIM::Buffer objects					*ruby-buffer*
+3. Vim::Buffer objects					*ruby-buffer*
 
-VIM::Buffer objects represent vim buffers.
+Vim::Buffer objects represent vim buffers.
 
 Class Methods:
 
@@ -159,9 +159,9 @@ line_number     Returns the number of the current line if the buffer is
 		active.
 
 ==============================================================================
-4. VIM::Window objects					*ruby-window*
+4. Vim::Window objects					*ruby-window*
 
-VIM::Window objects represent vim windows.
+Vim::Window objects represent vim windows.
 
 Class Methods:
 
@@ -199,13 +199,17 @@ This means that Vim will search for the Ruby DLL file or shared library only
 when needed.  When you don't use the Ruby interface you don't need it, thus
 you can use Vim even though this library file is not on your system.
 
+
+MS-Windows ~
+
 You need to install the right version of Ruby for this to work.  You can find
 the package to download from:
 http://www.garbagecollect.jp/ruby/mswin32/en/download/release.html
 Currently that is ruby-1.9.1-p429-i386-mswin32.zip
 
 To use the Ruby interface the Ruby DLL must be in your search path.  In a
-console window type "path" to see what directories are used.
+console window type "path" to see what directories are used.  The 'rubydll'
+option can be also used to specify the Ruby DLL.
 
 The name of the DLL must match the Ruby version Vim was compiled with.
 Currently the name is "msvcrt-ruby191.dll".  That is for Ruby 1.9.1.  To know
@@ -216,5 +220,13 @@ and comment-out the check for _MSC_VER.
 You may also need to rename the include directory name to match the version,
 strangely for Ruby 1.9.3 the directory is called 1.9.1.
 
+
+Unix ~
+
+The 'rubydll' option can be used to specify the Ruby shared library file
+instead of DYNAMIC_RUBY_DLL file what was specified at compile time.  The
+version of the shared library must match the Ruby version Vim was compiled
+with.
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_sniff.txt

@@ -1,95 +1,11 @@
-*if_sniff.txt*	For Vim version 7.4.  Last change: 2005 Mar 29
+*if_sniff.txt*	For Vim version 7.4.  Last change: 2016 Feb 27
 
 
 		  VIM REFERENCE MANUAL
 		by Anton Leherbauer (toni@takefive.co.at)
 
 
-SNiFF+ and Vim				    *sniff*
-
-1. Introduction				    |sniff-intro|
-2. Commands				    |sniff-commands|
-3. Compiling Vim with SNiFF+ interface	    |sniff-compiling|
-
-{Vi does not have any of these commands}  *E275* *E274* *E276* *E278* *E279*
-
-The SNiFF+ interface only works, when Vim was compiled with the |+sniff|
-feature.
-
-==============================================================================
-1. Introduction					*sniff-intro*
-
-The following features for the use with SNiFF+ are available:
-
-   * Vim can be used for all editing requests
-   * SNiFF+ recognizes and updates all browsers when a file is saved in Vim
-   * SNiFF+ commands can be issued directly from Vim
-
-How to use Vim with SNiFF+
-   1. Make sure SNiFF+ is running.
-   2. In the Editor view of the Preferences dialog set the Field named
-      'External Editor' to 'Emacs/Vim'.
-   4. Start Vim
-   5. Connect to SNiFF+ (:sniff connect)
-
-Once a connection is established, SNiFF+ uses Vim for all requests to show or
-edit source code.  On the other hand, you can send queries to SNiFF+ with the
-:sniff command.
-
-==============================================================================
-2. Commands				    *sniff-commands*
-
-			    *:sniff* *:sni*
-:sni[ff] request [symbol]   Send request to sniff with optional symbol.
-			    {not in Vi}
-:sni[ff]		    Display all possible requests and the connection
-			    status
-
-Most requests require a symbol (identifier) as parameter.  If it is omitted,
-Vim will use the current word under the cursor.
-The available requests are listed below:
-
-request		      mapping	description
--------------------------------------------------------------------------------
-connect			sc	Establish connection with SNiFF+.
-				Make sure SNiFF+ is prepared for this in the
-				Preferences
-disconnect		sq	Disconnect from SNiFF+.  You can reconnect any
-				time with :sniff connect (or 'sc')
-toggle			st	Toggle between implementation
-				and definition file
-find-symbol		sf	Load the symbol into a Symbol Browser
-browse-class		sb	Loads the class into a Class Browser
-superclass		ss	Edit superclass of symbol
-overridden		so	Edit overridden method of symbol
-retrieve-file		srf	Retrieve symbol in current file
-retrieve-project	srp	Retrieve symbol in current project
-retrieve-all-projects	srP	Retrieve symbol in all projects
-retrieve-next		sR	Retrieve symbol using current Retriever
-				settings
-goto-symbol		sg	Goto definition or implementation of symbol
-hierarchy		sh	Load symbol into the Hierarchy Browser
-restr-hier		sH	same as above but show only related classes
-xref-to			sxt	Start a refers-to query on symbol and
-				load the results into the Cross Referencer
-xref-by			sxb	Start a referred-by query on symbol
-xref-has		sxh	Start a refers-to components query on symbol
-xref-used-by		sxu	Start a referred-by as component query on
-				symbol
-show-docu		sd	Show documentation of symbol
-gen-docu		sD	Generate documentation of symbol
-
-The mappings are defined in a file 'sniff.vim', which is part of every SNiFF+
-product ($SNIFF_DIR/config/sniff.vim).  This file is sourced whenever Vim
-connects to SNiFF+.
-
-==============================================================================
-3. Compiling Vim with SNiFF+ interface		*sniff-compiling*
-
-To compile Vim with SNiFF+ support, you need two source files of the extra
-archive: if_sniff.c and if_sniff.h.
-On Unix: Edit the Makefile and uncomment the line "--enable-sniff".  Or run
-configure manually with this argument.
-On NT: Specify SNIFF=yes with your make command.
+The SNiFF+ support was removed at patch 7.4.1433.  If you want to check it out
+sync to before that.
 
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/if_tcl.txt

@@ -1,4 +1,4 @@
-*if_tcl.txt*    For Vim version 7.4.  Last change: 2012 Aug 02
+*if_tcl.txt*    For Vim version 7.4.  Last change: 2016 Jan 01
 
 
 		  VIM REFERENCE MANUAL    by Ingo Wilken
@@ -16,7 +16,7 @@ The Tcl Interface to Vim				*tcl* *Tcl* *TCL*
 8. Examples				|tcl-examples|
 9. Dynamic loading			|tcl-dynamic|
 
-{Vi does not have any of these commands} *E280* *E281*
+{Vi does not have any of these commands} *E280*
 
 The Tcl interface only works when Vim was compiled with the |+tcl| feature.
 
@@ -515,19 +515,30 @@ startup file (usually "~/.vimrc" on Unix):
 ==============================================================================
 9. Dynamic loading					*tcl-dynamic*
 
-On MS-Windows the Tcl library can be loaded dynamically.  The |:version|
-output then includes |+tcl/dyn|.
+On MS-Windows and Unix the Tcl library can be loaded dynamically.  The
+|:version| output then includes |+tcl/dyn|.
 
-This means that Vim will search for the Tcl DLL file only when needed.  When
-you don't use the Tcl interface you don't need it, thus you can use Vim
-without this DLL file.
+This means that Vim will search for the Tcl DLL or shared library file only
+when needed.  When you don't use the Tcl interface you don't need it, thus you
+can use Vim without this file.
+
+
+MS-Windows ~
 
 To use the Tcl interface the Tcl DLL must be in your search path.  In a
-console window type "path" to see what directories are used.
+console window type "path" to see what directories are used.  The 'tcldll'
+option can be also used to specify the Tcl DLL.
 
 The name of the DLL must match the Tcl version Vim was compiled with.
-Currently the name is "tcl83.dll".  That is for Tcl 8.3.  To know for sure
+Currently the name is "tcl86.dll".  That is for Tcl 8.6.  To know for sure
 edit "gvim.exe" and search for "tcl\d*.dll\c".
 
+
+Unix ~
+
+The 'tcldll' option can be used to specify the Tcl shared library file instead
+of DYNAMIC_TCL_DLL file what was specified at compile time.  The version of
+the shared library must match the Tcl version Vim was compiled with.
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.4.  Last change: 2015 Feb 12
+*index.txt*     For Vim version 7.4.  Last change: 2016 Apr 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -49,6 +49,7 @@ tag		char		action in Insert mode	~
 |i_CTRL-G_k|	CTRL-G k	line up, to column where inserting started
 |i_CTRL-G_k|	CTRL-G <Up>	line up, to column where inserting started
 |i_CTRL-G_u|	CTRL-G u	start new undoable edit
+|i_CTRL-G_U|	CTRL-G U	don't break undo with next cursor movement
 |i_<BS>|	<BS>		delete character before the cursor
 |i_digraph|	{char1}<BS>{char2}
 				enter digraph (only when 'digraph' option set)
@@ -859,6 +860,7 @@ tag		command	      note action in Visual mode	~
 ------------------------------------------------------------------------------
 |v_CTRL-\_CTRL-N| CTRL-\ CTRL-N	   stop Visual mode
 |v_CTRL-\_CTRL-G| CTRL-\ CTRL-G	   go to mode specified with 'insertmode'
+|v_CTRL-A|	CTRL-A		2  add N to number in highlighted text
 |v_CTRL-C|	CTRL-C		   stop Visual mode
 |v_CTRL-G|	CTRL-G		   toggle between Visual mode and Select mode
 |v_<BS>|	<BS>		2  Select mode: delete highlighted area
@@ -867,6 +869,7 @@ tag		command	      note action in Visual mode	~
 				   command
 |v_CTRL-V|	CTRL-V		   make Visual mode blockwise or stop Visual
 				   mode
+|v_CTRL-X|	CTRL-X		2  subtract N from number in highlighted text
 |v_<Esc>|	<Esc>		   stop Visual mode
 |v_CTRL-]|	CTRL-]		   jump to highlighted tag
 |v_!|		!{filter}	2  filter the highlighted lines through the
@@ -923,6 +926,8 @@ tag		command	      note action in Visual mode	~
 |v_a}|		a}		   same as aB
 |v_c|		c		2  delete highlighted area and start insert
 |v_d|		d		2  delete highlighted area
+|v_g_CTRL-A|	g CTRL-A	2  add N to number in highlighted text
+|v_g_CTRL-X|	g CTRL-X	2  subtract N from number in highlighted text
 |v_gJ|		gJ		2  join the highlighted lines without
 				   inserting spaces
 |v_gq|		gq		2  format the highlighted lines
@@ -1055,7 +1060,7 @@ tag		command	      action in Command-line editing mode	~
 |c_<Insert>|	<Insert>	toggle insert/overstrike mode
 |c_<LeftMouse>|	<LeftMouse>	cursor at mouse click
 
-You found it, Arthur!				*holy-grail*
+You found it, Arthur!				*holy-grail* *:smile*
 
 ==============================================================================
 5. EX commands					*ex-cmd-index* *:index*
@@ -1176,7 +1181,7 @@ tag	      command	      action ~
 |:cpfile|	:cpf[ile]	go to last error in previous file
 |:cquit|	:cq[uit]	quit Vim with an error code
 |:crewind|	:cr[ewind]	go to the specified error, default first one
-|:cscope|	:cs[cope]       execute cscope command
+|:cscope|	:cs[cope]	execute cscope command
 |:cstag|	:cst[ag]	use cscope to jump to a tag
 |:cunmap|	:cu[nmap]	like ":unmap" but for Command-line mode
 |:cunabbrev|	:cuna[bbrev]	like ":unabbrev" but for Command-line mode
@@ -1297,7 +1302,7 @@ tag	      command	      action ~
 |:lcd|		:lc[d]		change directory locally
 |:lchdir|	:lch[dir]	change directory locally
 |:lclose|	:lcl[ose]	close location window
-|:lcscope|	:lcs[cope]      like ":cscope" but uses location list
+|:lcscope|	:lcs[cope]	like ":cscope" but uses location list
 |:ldo|		:ld[o]		execute command in valid location list entries
 |:lfdo|		:lfd[o]		execute command in each file in location list
 |:left|		:le[ft]		left align lines
@@ -1351,7 +1356,7 @@ tag	      command	      action ~
 |:marks|	:marks		list all marks
 |:match|	:mat[ch]	define a match to highlight
 |:menu|		:me[nu]		enter a new menu item
-|:menutranslate| :menut[ranslate] add a menu translation item
+|:menutranslate|  :menut[ranslate] add a menu translation item
 |:messages|	:mes[sages]	view previously displayed messages
 |:mkexrc|	:mk[exrc]	write current mappings and settings to a file
 |:mksession|	:mks[ession]	write session info to a file
@@ -1394,6 +1399,8 @@ tag	      command	      action ~
 |:ounmap|	:ou[nmap]	like ":unmap" but for Operator-pending mode
 |:ounmenu|	:ounme[nu]	remove menu for Operator-pending mode
 |:ownsyntax|	:ow[nsyntax]	set new local syntax highlight for this window
+|:packadd|	:pa[ckadd]	add a plugin from 'packpath'
+|:packloadall|	:packl[oadall]	load all packages under 'packpath'
 |:pclose|	:pc[lose]	close preview window
 |:pedit|	:ped[it]	edit file in the preview window
 |:perl|		:pe[rl]		execute Perl command
@@ -1495,9 +1502,9 @@ tag	      command	      action ~
 |:smap|		:smap		like ":map" but for Select mode
 |:smapclear|	:smapc[lear]	remove all mappings for Select mode
 |:smenu|	:sme[nu]	add menu for Select mode
+|:smile|	:smi[le]	make the user happy
 |:snext|	:sn[ext]	split window and go to next file in the
 				argument list
-|:sniff|	:sni[ff]	send request to sniff
 |:snomagic|	:sno[magic]	:substitute with 'nomagic'
 |:snoremap|	:snor[emap]	like ":noremap" but for Select mode
 |:snoremenu|	:snoreme[nu]	like ":noremenu" but for Select mode
@@ -1517,7 +1524,7 @@ tag	      command	      action ~
 |:stop|		:st[op]		suspend the editor or escape to a shell
 |:stag|		:sta[g]		split window and jump to a tag
 |:startinsert|	:star[tinsert]	start Insert mode
-|:startgreplace| :startg[replace] start Virtual Replace mode
+|:startgreplace|  :startg[replace] start Virtual Replace mode
 |:startreplace|	:startr[eplace]	start Replace mode
 |:stopinsert|	:stopi[nsert]	stop Insert mode
 |:stjump|	:stj[ump]	do ":tjump" and split window
@@ -1538,14 +1545,14 @@ tag	      command	      action ~
 |:tabdo|	:tabdo		execute command in each tab page
 |:tabedit|	:tabe[dit]	edit a file in a new tab page
 |:tabfind|	:tabf[ind]	find file in 'path', edit it in a new tab page
-|:tabfirst|	:tabfir[st]	got to first tab page
-|:tablast|	:tabl[ast]	got to last tab page
+|:tabfirst|	:tabfir[st]	go to first tab page
+|:tablast|	:tabl[ast]	go to last tab page
 |:tabmove|	:tabm[ove]	move tab page to other position
 |:tabnew|	:tabnew		edit a file in a new tab page
 |:tabnext|	:tabn[ext]	go to next tab page
 |:tabonly|	:tabo[nly]	close all tab pages except the current one
 |:tabprevious|	:tabp[revious]	go to previous tab page
-|:tabrewind|	:tabr[ewind]	got to first tab page
+|:tabrewind|	:tabr[ewind]	go to first tab page
 |:tabs|		:tabs		list the tab pages and what they contain
 |:tab|		:tab		create new tab when opening new window
 |:tag|		:ta[g]		jump to tag

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.4.  Last change: 2015 Jun 20
+*insert.txt*    For Vim version 7.4.  Last change: 2016 Jan 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -152,7 +152,7 @@ CTRL-R CTRL-R {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-R*
 	CTRL-R a		results in "ac".
 	CTRL-R CTRL-R a		results in "ab^Hc".
 <		Options 'textwidth', 'formatoptions', etc. still apply.  If
-		you also want to avoid these, use "<C-R><C-O>r", see below.
+		you also want to avoid these, use CTRL-R CTRL-O, see below.
 		The '.' register (last inserted text) is still inserted as
 		typed.  {not in Vi}
 
@@ -1872,8 +1872,6 @@ NOTE: These commands cannot be used with |:global| or |:vglobal|.
 			or script is finished.
 			This command does not work from |:normal|.
 			{not in Vi}
-			{not available when compiled without the |+ex_extra|
-			feature}
 
 							*:stopi* *:stopinsert*
 :stopi[nsert]		Stop Insert mode as soon as possible.  Works like
@@ -1891,15 +1889,11 @@ NOTE: These commands cannot be used with |:global| or |:vglobal|.
 			script that the replacement will only start after
 			the function or script is finished.
 			{not in Vi}
-			{not available when compiled without the |+ex_extra|
-			feature}
 
 							*:startgreplace*
 :startg[replace][!]	Just like |:startreplace|, but use Virtual Replace
 			mode, like with |gR|.
 			{not in Vi}
-			{not available when compiled without the |+ex_extra|
-			feature}
 
 ==============================================================================
 10. Inserting a file					*inserting-file*

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.4.  Last change: 2014 Dec 08
+*map.txt*       For Vim version 7.4.  Last change: 2016 Jan 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -483,7 +483,7 @@ internal code is written to the script file.
 
 
 1.6 SPECIAL CHARACTERS					*:map-special-chars*
-							*map_backslash*
+						*map_backslash* *map-backslash*
 Note that only CTRL-V is mentioned here as a special character for mappings
 and abbreviations.  When 'cpoptions' does not contain 'B', a backslash can
 also be used like CTRL-V.  The <> notation can be fully used then |<>|.  But
@@ -494,21 +494,21 @@ To map a backslash, or use a backslash literally in the {rhs}, the special
 sequence "<Bslash>" can be used.  This avoids the need to double backslashes
 when using nested mappings.
 
-							*map_CTRL-C*
+						*map_CTRL-C* *map-CTRL-C*
 Using CTRL-C in the {lhs} is possible, but it will only work when Vim is
 waiting for a key, not when Vim is busy with something.  When Vim is busy
 CTRL-C interrupts/breaks the command.
 When using the GUI version on MS-Windows CTRL-C can be mapped to allow a Copy
 command to the clipboard.  Use CTRL-Break to interrupt Vim.
 
-							*map_space_in_lhs*
+					*map_space_in_lhs* *map-space_in_lhs*
 To include a space in {lhs} precede it with a CTRL-V (type two CTRL-Vs for
 each space).
-							*map_space_in_rhs*
+					*map_space_in_rhs* *map-space_in_rhs*
 If you want a {rhs} that starts with a space, use "<Space>".  To be fully Vi
 compatible (but unreadable) don't use the |<>| notation, precede {rhs} with a
 single CTRL-V (you have to type CTRL-V two times).
-							*map_empty_rhs*
+						*map_empty_rhs* *map-empty-rhs*
 You can create an empty {rhs} by typing nothing after a single CTRL-V (you
 have to type CTRL-V two times).  Unfortunately, you cannot do this in a vimrc
 file.
@@ -583,7 +583,7 @@ Upper and lowercase differences are ignored.
 It is not possible to put a comment after these commands, because the '"'
 character is considered to be part of the {lhs} or {rhs}.
 
-							*map_bar*
+							*map_bar* *map-bar*
 Since the '|' character is used to separate a map command from the next
 command, you will have to do something special to include  a '|' in {rhs}.
 There are three methods:
@@ -601,7 +601,7 @@ When 'b' is present in 'cpoptions', "\|" will be recognized as a mapping
 ending in a '\' and then another command.  This is Vi compatible, but
 illogical when compared to other commands.
 
-							*map_return*
+						*map_return* *map-return*
 When you have a mapping that contains an Ex command, you need to put a line
 terminator after it to have it executed.  The use of <CR> is recommended for
 this (see |<>|).  Example: >
@@ -1358,7 +1358,7 @@ Possible attributes are:
 Note that -range=N and -count=N are mutually exclusive - only one should be
 specified.
 
-					*E889* *:command-addr*
+					*:command-addr*
 It is possible that the special characters in the range like ., $ or % which
 by default correspond to the current line, last line and the whole buffer,
 relate to arguments, (loaded) buffers, windows or tab pages.

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 7.4.  Last change: 2013 Feb 23
+*message.txt*   For Vim version 7.4.  Last change: 2016 Apr 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -19,6 +19,15 @@ The ":messages" command can be used to view previously given messages.  This
 is especially useful when messages have been overwritten or truncated.  This
 depends on the 'shortmess' option.
 
+	:messages		Show all messages.
+
+	:{count}messages	Show the {count} most recent messages.
+
+	:messages clear		Clear all messages.
+
+	:{count}messages clear	Clear messages, keeping only the {count} most
+				recent ones.
+
 The number of remembered messages is fixed at 20 for the tiny version and 200
 for other versions.
 
@@ -58,8 +67,9 @@ If you are lazy, it also works without the shift key: >
 When an error message is displayed, but it is removed before you could read
 it, you can see it again with: >
   :echo errmsg
-or view a list of recent messages with: >
+Or view a list of recent messages with: >
   :messages
+See `:messages` above.
 
 
 LIST OF MESSAGES
@@ -476,8 +486,6 @@ in memory, you can reduce that with these options:
   helps for a change that affects all lines.
 - 'undoreload' Set to zero to disable.
 
-Also see |msdos-limitations|.
-
 							*E339*  >
   Pattern too long
 

runtime/doc/mlang.txt

@@ -1,4 +1,4 @@
-*mlang.txt*     For Vim version 7.4.  Last change: 2012 Jan 15
+*mlang.txt*     For Vim version 7.4.  Last change: 2016 Jan 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -97,13 +97,15 @@ If you used the self-installing .exe file, message translations should work
 already.  Otherwise get the libintl.dll file if you don't have it yet:
 
 	http://sourceforge.net/projects/gettext
+Or:
+	https://mlocati.github.io/gettext-iconv-windows/
 
 This also contains tools xgettext, msgformat and others.
 
 libintl.dll should be placed in same directory with (g)vim.exe, or some
-place where PATH environment value describe.  Message files (vim.mo)
-have to be placed in "$VIMRUNTIME/lang/xx/LC_MESSAGES", where "xx" is the
-abbreviation of the language (mostly two letters).
+place where PATH environment value describe.  Vim also finds libintl-8.dll.
+Message files (vim.mo) have to be placed in "$VIMRUNTIME/lang/xx/LC_MESSAGES",
+where "xx" is the abbreviation of the language (mostly two letters).
 
 If you write your own translations you need to generate the .po file and
 convert it to a .mo file.  You need to get the source distribution and read

runtime/doc/netbeans.txt

@@ -1,10 +1,10 @@
-*netbeans.txt*  For Vim version 7.4.  Last change: 2015 Mar 14
+*netbeans.txt*  For Vim version 7.4.  Last change: 2016 Feb 18
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur et al.
 
 
-			*socket-interface* *netbeans* *netbeans-support*
+					*netbeans* *netbeans-support*
 
 Vim NetBeans Protocol: a socket interface for Vim integration into an IDE.
 
@@ -194,6 +194,8 @@ There are two different ways to run Vim in NetBeans mode:
 	+ an IDE may start Vim with the |-nb| command line argument
 	+ NetBeans can be started from within Vim with the |:nbstart| command
 
+Vim uses a 3 second timeout on trying to make the connection.
+
 							*netbeans-parameters*
 Three forms can be used to setup the NetBeans connection parameters.
 When started from the command line, the |-nb| command line argument may be:
@@ -823,9 +825,9 @@ REJECT		Not used.
 6.7 Protocol errors					*nb-protocol_errors*
 
 These errors occur when a message violates the protocol:
-*E627* *E628* *E629* *E630* *E631* *E632* *E633* *E634* *E635* *E636*
+*E627* *E628* *E629* *E632* *E633* *E634* *E635* *E636*
 *E637* *E638* *E639* *E640* *E641* *E642* *E643* *E644* *E645* *E646*
-*E647* *E648* *E649* *E650* *E651* *E652* *E653* *E654*
+*E647* *E648* *E649* *E650* *E651* *E652*
 
 
 ==============================================================================

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.4.  Last change: 2015 Aug 25
+*options.txt*	For Vim version 7.4.  Last change: 2016 May 24
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -69,7 +69,7 @@ achieve special effects.  These options come in three forms:
 :se[t] {option}:{value}
 			Set string or number option to {value}.
 			For numeric options the value can be given in decimal,
- 			hex (preceded with 0x) or octal (preceded with '0').
+			hex (preceded with 0x) or octal (preceded with '0').
 			The old value can be inserted by typing 'wildchar' (by
 			default this is a <Tab> or CTRL-E if 'compatible' is
 			set).  See |cmdline-completion|.
@@ -796,7 +796,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	line.
 	When 'smartindent' or 'cindent' is on the indent is changed in
 	a different way.
-	The 'autoindent' option is reset when the 'paste' option is set.
+	The 'autoindent' option is reset when the 'paste' option is set and
+	restored when 'paste' is reset.
 	{small difference from Vi: After the indent is deleted when typing
 	<Esc> or <CR>, the cursor position when moving up or down is after the
 	deleted indent; Vi puts the cursor somewhere in the deleted indent}.
@@ -1001,7 +1002,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	- The backup file will be created in the first directory in the list
 	  where this is possible.  The directory must exist, Vim will not
 	  create it for you.
-	- Empty means that no backup file will be created ( 'patchmode' is
+	- Empty means that no backup file will be created ('patchmode' is
 	  impossible!).  Writing may fail because of this.
 	- A directory "." means to put the backup file in the same directory
 	  as the edited file.
@@ -1069,7 +1070,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 	Note that environment variables are not expanded.  If you want to use
 	$HOME you must expand it explicitly, e.g.: >
-		:let backupskip = escape(expand('$HOME'), '\') . '/tmp/*'
+		:let &backupskip = escape(expand('$HOME'), '\') . '/tmp/*'
 
 <	Note that the default also makes sure that "crontab -e" works (when a
 	backup would be made by renaming the original file crontab won't see
@@ -1210,10 +1211,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'bioskey' 'biosk'	boolean	(default on)
 			global
 			{not in Vi}  {only for MS-DOS}
-	When on the BIOS is called to obtain a keyboard character.  This works
-	better to detect CTRL-C, but only works for the console.  When using a
-	terminal over a serial port reset this option.
-	Also see |'conskey'|.
+	This was for MS-DOS and is no longer supported.
 
 							*'bomb'* *'nobomb'*
 'bomb'			boolean	(default off)
@@ -1247,7 +1245,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	break if 'linebreak' is on.  Only works for ASCII and also for 8-bit
 	characters when 'encoding' is an 8-bit encoding.
 
-						*'breakindent'* *'bri'*
+			*'breakindent'* *'bri'* *'nobreakindent'* *'nobri'*
 'breakindent' 'bri'	boolean (default off)
 			local to window
 			{not in Vi}
@@ -1794,7 +1792,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	when CTRL-P or CTRL-N are used.  It is also used for whole-line
 	completion |i_CTRL-X_CTRL-L|.  It indicates the type of completion
 	and the places to scan.  It is a comma separated list of flags:
-	.	scan the current buffer ( 'wrapscan' is ignored)
+	.	scan the current buffer ('wrapscan' is ignored)
 	w	scan buffers from other windows
 	b	scan other loaded buffers that are in the buffer list
 	u	scan the unloaded buffers that are in the buffer list
@@ -1945,13 +1943,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'conskey' 'consk'	boolean	(default off)
 			global
 			{not in Vi}  {only for MS-DOS}
-	When on direct console I/O is used to obtain a keyboard character.
-	This should work in most cases.  Also see |'bioskey'|.  Together,
-	three methods of console input are available:
-	'conskey'   'bioskey'	    action ~
-	   on	     on or off	    direct console input
-	   off		on	    BIOS
-	   off		off	    STDIN
+	This was for MS-DOS and is no longer supported.
 
 			*'copyindent'* *'ci'* *'nocopyindent'* *'noci'*
 'copyindent' 'ci'	boolean	(default off)
@@ -1968,7 +1960,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	NOTE: 'copyindent' is reset when 'compatible' is set.
 	Also see 'preserveindent'.
 
-						*'cpoptions'* *'cpo'*
+						*'cpoptions'* *'cpo'* *cpo*
 'cpoptions' 'cpo'	string	(Vim default: "aABceFs",
 				 Vi default:  all flags)
 			global
@@ -2294,12 +2286,14 @@ A jump table for the options with a short description can be found at |Q_op|.
 			the encrypted bytes will be different.
 							*blowfish2*
 	   blowfish2	Blowfish method.  Medium strong encryption.  Requires
-			Vim 7.4.399 or later, files can NOT be read by Vim 7.3
+			Vim 7.4.401 or later, files can NOT be read by Vim 7.3
 			and older.  This adds a "seed" to the file, every time
 			you write the file the encrypted bytes will be
 			different.  The whole undo file is encrypted, not just
 			the pieces of text.
 
+	You should use "blowfish2", also to re-encrypt older files.
+
 	When reading an encrypted file 'cryptmethod' will be set automatically
 	to the detected method of the file being read.  Thus if you write it
 	without changing 'cryptmethod' the same method will be used.
@@ -2652,6 +2646,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 	also 'gdefault' option.
 	Switching this option on is discouraged!
 
+					*'emoji'* *'emo'* *'noemoji'* *'noemo'*
+'emoji' 'emo'	boolean (default: on)
+			global
+			{not in Vi}
+			{only available when compiled with the |+multi_byte|
+			feature}
+	When on all Unicode emoji characters are considered to be full width.
+
+
 					*'encoding'* *'enc'* *E543*
 'encoding' 'enc'	string (default: "latin1" or value from $LANG)
 			global
@@ -2835,6 +2838,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	<Tab>.  Spaces are used in indents with the '>' and '<' commands and
 	when 'autoindent' is on.  To insert a real tab when 'expandtab' is
 	on, use CTRL-V<Tab>.  See also |:retab| and |ins-expandtab|.
+	This option is reset when the 'paste' option is set and restored when
+	the 'paste' option is reset.
 	NOTE: This option is reset when 'compatible' is set.
 
 					*'exrc'* *'ex'* *'noexrc'* *'noex'*
@@ -3027,8 +3032,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  file only, the option is not changed.
 	When 'binary' is set, the value of 'fileformats' is not used.
 
-	Note that when Vim starts up with an empty buffer this option is not
-	used.  Set 'fileformat' in your .vimrc instead.
+	When Vim starts up with an empty buffer the first item is used.  You
+	can overrule this by setting 'fileformat' in your .vimrc.
 
 	For systems with a Dos-like <EOL> (<CR><NL>), when reading files that
 	are ":source"ed and for vimrc files, automatic <EOL> detection may be
@@ -3093,17 +3098,17 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 	  item		default		Used for ~
 	  stl:c		' ' or '^'	statusline of the current window
-	  stlnc:c	' ' or '-'	statusline of the non-current windows
+	  stlnc:c	' ' or '='	statusline of the non-current windows
 	  vert:c	'|'		vertical separators |:vsplit|
 	  fold:c	'-'		filling 'foldtext'
 	  diff:c	'-'		deleted lines of the 'diff' option
 
 	Any one that is omitted will fall back to the default.  For "stl" and
-	"stlnc" the space will be used when there is highlighting, '^' or '-'
+	"stlnc" the space will be used when there is highlighting, '^' or '='
 	otherwise.
 
 	Example: >
-	    :set fillchars=stl:^,stlnc:-,vert:\|,fold:-,diff:-
+	    :set fillchars=stl:^,stlnc:=,vert:\|,fold:-,diff:-
 <	This is similar to the default, except that these characters will also
 	be used when there is highlighting.
 
@@ -3409,7 +3414,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	modeline, see |sandbox-option|.  That stops the option from working,
 	since changing the buffer text is not allowed.
 
-						*'fsync'* *'fs'*
+					*'fsync'* *'fs'* *'nofsync'* *'nofs'*
 'fsync' 'fs'		boolean	(default on)
 			global
 			{not in Vi}
@@ -3629,6 +3634,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 		      HANGEUL, HEBREW, JOHAB, MAC, OEM, RUSSIAN, SHIFTJIS,
 		      SYMBOL, THAI, TURKISH, VIETNAMESE ANSI and BALTIC.
 		      Normally you would use "cDEFAULT".
+		qXX - quality XX.  Valid quality names are: PROOF, DRAFT,
+		      ANTIALIASED, NONANTIALIASED, CLEARTYPE, DEFAULT.
+		      Normally you would use "qDEFAULT".
+		      Some quality values isn't supported in legacy OSs.
 
 	  Use a ':' to separate the options.
 	- A '_' can be used in the place of a space, so you don't need to use
@@ -3738,7 +3747,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 		The same applies to the modeless selection.
 								*'go-P'*
 	  'P'	Like autoselect but using the "+ register instead of the "*
-	  	register.
+		register.
 								*'go-A'*
 	  'A'	Autoselect for the modeless selection.  Like 'a', but only
 		applies to the modeless selection.
@@ -4106,7 +4115,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 	Ignore case in search patterns.  Also used when searching in the tags
 	file.
-	Also see 'smartcase'.
+	Also see 'smartcase' and 'tagcase'.
 	Can be overruled by using "\c" or "\C" in the pattern, see
 	|/ignorecase|.
 
@@ -4486,6 +4495,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'*', '"' and '|' (so that CTRL-] on a command finds the help for that
 	command).
 	When the 'lisp' option is on the '-' character is always included.
+	This option also influences syntax highlighting, unless the syntax
+	uses |:syn-iskeyword|.
 	NOTE: This option is set to the Vi default value when 'compatible' is
 	set and to the Vim default value when 'compatible' is reset.
 
@@ -4576,16 +4587,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 
 					*'keywordprg'* *'kp'*
 'keywordprg' 'kp'	string	(default "man" or "man -s",  DOS: ":help",
-						OS/2: "view /", VMS: "help")
+								  VMS: "help")
 			global or local to buffer |global-local|
 			{not in Vi}
 	Program to use for the |K| command.  Environment variables are
 	expanded |:set_env|.  ":help" may be used to access the Vim internal
 	help.  (Note that previously setting the global option to the empty
 	value did this, which is now deprecated.)
-	When "man" is used, Vim will automatically translate a count for the
-	"K" command to a section number.  Also for "man -s", in which case the
-	"-s" is removed when there is no count.
+	When the first character is ":", the command is invoked as a Vim
+	Ex command prefixed with [count].
+	When "man", "man -s" or an Ex command is used, Vim will automatically
+	translate a count for the "K" command and pass it as the first
+	argument.  For "man -s" the "-s" is removed when there is no count.
 	See |option-backslash| about including spaces and backslashes.
 	Example: >
 		:set keywordprg=man\ -s
@@ -4600,7 +4613,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			feature}
 	This option allows switching your keyboard into a special language
 	mode.  When you are typing text in Insert mode the characters are
-	inserted directly.  When in command mode the 'langmap' option takes
+	inserted directly.  When in Normal mode the 'langmap' option takes
 	care of translating these special characters to the original meaning
 	of the key.  This means you don't have to change the keyboard mode to
 	be able to execute Normal mode commands.
@@ -4663,7 +4676,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 		:source $VIMRUNTIME/menu.vim
 <	Warning: This deletes all menus that you defined yourself!
 
-					*'langnoremap'* *'lnr'*
+			*'langnoremap'* *'lnr'* *'nolangnoremap'* *'nolnr'*
 'langnoremap' 'lnr'	boolean (default off)
 			global
 			{not in Vi}
@@ -4844,6 +4857,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Note that using the "-u NONE" and "--noplugin" command line arguments
 	reset this option. |-u| |--noplugin|
 
+						*'luadll'*
+'luadll'		string	(default depends on the build)
+			global
+			{not in Vi}
+			{only available when compiled with the |+lua/dyn|
+			feature}
+	Specifies the name of the Lua shared library. The default is
+	DYNAMIC_LUA_DLL, which was specified at compile time.
+	Environment variables are expanded |:set_env|.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
+
 						*'macatsui'* *'nomacatsui'*
 'macatsui'		boolean	(default on)
 			global
@@ -5005,8 +5030,11 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	Maximum amount of memory in Kbyte to use for all buffers together.
 	The maximum usable value is about 2000000 (2 Gbyte).  Use this to work
-	without a limit.  On 64 bit machines higher values might work.  But
-	hey, do you really need more than 2 Gbyte for text editing?
+	without a limit.
+	On 64 bit machines higher values might work.  But hey, do you really
+	need more than 2 Gbyte for text editing?  Keep in mind that text is
+	stored in the swap file, one can edit files > 2 Gbyte anyway.  We do
+	need the memory to store undo info.
 	Also see 'maxmem'.
 
 						*'menuitems'* *'mis'*
@@ -5096,6 +5124,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   written.  A ":set nomodified" command also resets the original
 	   values to the current values and the 'modified' option will be
 	   reset.
+	   Similarly for 'eol' and 'bomb'.
 	This option is not set when a change is made to the buffer as the
 	result of a BufNewFile, BufRead/BufReadPost, BufWritePost,
 	FileAppendPost or VimLeave autocommand event.  See |gzip-example| for
@@ -5280,7 +5309,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Negative or zero value means no thread scheduling.
 
 							*'nrformats'* *'nf'*
-'nrformats' 'nf'	string	(default "octal,hex")
+'nrformats' 'nf'	string	(default "bin,octal,hex")
 			local to buffer
 			{not in Vi}
 	This defines what bases Vim will consider for numbers when using the
@@ -5288,12 +5317,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 	respectively; see |CTRL-A| for more info on these commands.
 	alpha	If included, single alphabetical characters will be
 		incremented or decremented.  This is useful for a list with a
-		letter index a), b), etc.	  	*octal-nrformats*
+		letter index a), b), etc.		*octal-nrformats*
 	octal	If included, numbers that start with a zero will be considered
 		to be octal.  Example: Using CTRL-A on "007" results in "010".
 	hex	If included, numbers starting with "0x" or "0X" will be
 		considered to be hexadecimal.  Example: Using CTRL-X on
 		"0x100" results in "0x0ff".
+	bin	If included, numbers starting with "0b" or "0B" will be
+		considered to be binary.  Example: Using CTRL-X on
+		"0b1000" subtracts one, resulting in "0b0111".
 	Numbers which simply begin with a digit in the range 1-9 are always
 	considered decimal.  This also happens for numbers that are not
 	recognized as octal or hex.
@@ -5315,7 +5347,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	relative to the cursor.  Together with 'number' there are these
 	four combinations (cursor in line 3):
 
-              	'nonu'          'nu'            'nonu'          'nu'
+		'nonu'          'nu'            'nonu'          'nu'
 		'nornu'         'nornu'         'rnu'           'rnu'
 
 	    |apple          |  1 apple      |  2 apple      |  2 apple
@@ -5387,6 +5419,12 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option was supported on RISC OS, which has been removed.
 
 
+				*'packpath'* *'pp'*
+'packpath' 'pp'		string	(default: see 'runtimepath')
+			{not in Vi}
+	Directories used to find packages.  See |packages|.
+
+
 						*'paragraphs'* *'para'*
 'paragraphs' 'para'	string	(default "IPLPPPQPP TPHPLIPpLpItpplpipbp")
 			global
@@ -5412,19 +5450,21 @@ A jump table for the options with a short description can be found at |Q_op|.
 	When the 'paste' option is switched on (also when it was already on):
 		- mapping in Insert mode and Command-line mode is disabled
 		- abbreviations are disabled
-		- 'textwidth' is set to 0
-		- 'wrapmargin' is set to 0
 		- 'autoindent' is reset
-		- 'smartindent' is reset
-		- 'softtabstop' is set to 0
+		- 'expandtab' is reset
+		- 'formatoptions' is used like it is empty
 		- 'revins' is reset
 		- 'ruler' is reset
 		- 'showmatch' is reset
-		- 'formatoptions' is used like it is empty
+		- 'smartindent' is reset
+		- 'smarttab' is reset
+		- 'softtabstop' is set to 0
+		- 'textwidth' is set to 0
+		- 'wrapmargin' is set to 0
 	These options keep their value, but their effect is disabled:
-		- 'lisp'
-		- 'indentexpr'
 		- 'cindent'
+		- 'indentexpr'
+		- 'lisp'
 	NOTE: When you start editing another file while the 'paste' option is
 	on, settings from the modelines or autocommands may change the
 	settings again, causing trouble when pasting text.  You might want to
@@ -5545,6 +5585,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	Replace the ';' with a ':' or whatever separator is used.  Note that
 	this doesn't work when $INCL contains a comma or white space.
 
+						*'perldll'*
+'perldll'		string	(default depends on the build)
+			global
+			{not in Vi}
+			{only available when compiled with the |+perl/dyn|
+			feature}
+	Specifies the name of the Perl shared library. The default is
+	DYNAMIC_PERL_DLL, which was specified at compile time.
+	Environment variables are expanded |:set_env|.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
+
 			*'preserveindent'* *'pi'* *'nopreserveindent'* *'nopi'*
 'preserveindent' 'pi'	boolean	(default off)
 			local to buffer
@@ -5671,6 +5723,29 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Insert mode completion.  When zero as much space as available is used.
 	|ins-completion-menu|.
 
+						*'pythondll'*
+'pythondll'		string	(default depends on the build)
+			global
+			{not in Vi}
+			{only available when compiled with the |+python/dyn|
+			feature}
+	Specifies the name of the Python 2.x shared library. The default is
+	DYNAMIC_PYTHON_DLL, which was specified at compile time.
+	Environment variables are expanded |:set_env|.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
+
+						*'pythonthreedll'*
+'pythonthreedll'	string	(default depends on the build)
+			global
+			{not in Vi}
+			{only available when compiled with the |+python3/dyn|
+			feature}
+	Specifies the name of the Python 3 shared library. The default is
+	DYNAMIC_PYTHON3_DLL, which was specified at compile time.
+	Environment variables are expanded |:set_env|.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
 
 						*'quoteescape'* *'qe'*
 'quoteescape' 'qe'	string	(default "\")
@@ -5857,7 +5932,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Inserting characters in Insert mode will work backwards.  See "typing
 	backwards" |ins-reverse|.  This option can be toggled with the CTRL-_
 	command in Insert mode, when 'allowrevins' is set.
-	NOTE: This option is reset when 'compatible' or 'paste' is set.
+	NOTE: This option is reset when 'compatible' is set.
+	This option is reset when 'paste' is set and restored when 'paste' is
+	reset.
 
 				 *'rightleft'* *'rl'* *'norightleft'* *'norl'*
 'rightleft' 'rl'	boolean	(default off)
@@ -5889,6 +5966,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This is useful for languages such as Hebrew, Arabic and Farsi.
 	The 'rightleft' option must be set for 'rightleftcmd' to take effect.
 
+						*'rubydll'*
+'rubydll'		string	(default: depends on the build)
+			global
+			{not in Vi}
+			{only available when compiled with the |+ruby/dyn|
+			feature}
+	Specifies the name of the Ruby shared library. The default is
+	DYNAMIC_RUBY_DLL, which was specified at compile time.
+	Environment variables are expanded |:set_env|.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
+
 					 *'ruler'* *'ru'* *'noruler'* *'noru'*
 'ruler' 'ru'		boolean	(default off)
 			global
@@ -5913,7 +6002,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	separated with a dash.
 	For an empty line "0-1" is shown.
 	For an empty buffer the line number will also be zero: "0,0-1".
-	This option is reset when the 'paste' option is set.
+	This option is reset when 'paste' is set and restored when 'paste' is
+	reset.
 	If you don't want to see the ruler all the time but want to know where
 	you are, use "g CTRL-G" |g_CTRL-G|.
 	NOTE: This option is reset when 'compatible' is set.
@@ -5975,6 +6065,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  keymap/	key mapping files |mbyte-keymap|
 	  lang/		menu translations |:menutrans|
 	  menu.vim	GUI menus |menu.vim|
+	  pack/		packages |:packadd|
 	  plugin/	plugin scripts |write-plugin|
 	  print/	files for printing |postscript-print-encoding|
 	  spell/	spell checking files |spell|
@@ -5996,6 +6087,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	   personal preferences to overrule or add to the distributed defaults
 	   or system-wide settings (rarely needed).
 
+	More entries are added when using |packages|.
+
 	Note that, unlike 'path', no wildcards like "**" are allowed.  Normal
 	wildcards are allowed, but can significantly slow down searching for
 	runtime files.  For speed, use as few items as possible and avoid
@@ -6466,6 +6559,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  c	don't give |ins-completion-menu| messages.  For example,
 		"-- XXX completion (YYY)", "match 1 of 2", "The only match",
 		"Pattern not found", "Back at original", etc.
+	  q	use "recording" instead of "recording @a"
+	  F	don't give the file info when editing a file, like `:silent`
+		was used for the command
 
 	This gives you the opportunity to avoid that a change between buffers
 	requires you to hit <Enter>, but still gives as useful a message as
@@ -6552,7 +6648,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	jump is only done if the match can be seen on the screen.  The time to
 	show the match can be set with 'matchtime'.
 	A Beep is given if there is no match (no matter if the match can be
-	seen or not).  This option is reset when the 'paste' option is set.
+	seen or not).
+	This option is reset when 'paste' is set and restored when 'paste' is
+	reset.
 	When the 'm' flag is not included in 'cpoptions', typing a character
 	will immediately move the cursor back to where it belongs.
 	See the "sm" field in 'guicursor' for setting the cursor shape and
@@ -6661,8 +6759,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	mapping: ":inoremap # X^H#", where ^H is entered with CTRL-V CTRL-H.
 	When using the ">>" command, lines starting with '#' are not shifted
 	right.
-	NOTE: 'smartindent' is reset when 'compatible' is set.  When 'paste'
-	is set smart indenting is disabled.
+	NOTE: 'smartindent' is reset when 'compatible' is set.
+	This option is reset when 'paste' is set and restored when 'paste' is
+	reset.
 
 				 *'smarttab'* *'sta'* *'nosmarttab'* *'nosta'*
 'smarttab' 'sta'	boolean	(default off)
@@ -6678,6 +6777,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	What gets inserted (a <Tab> or spaces) depends on the 'expandtab'
 	option.  Also see |ins-expandtab|.  When 'expandtab' is not set, the
 	number of spaces is minimized by using <Tab>s.
+	This option is reset when 'paste' is set and restored when 'paste' is
+	reset.
 	NOTE: This option is reset when 'compatible' is set.
 
 					*'softtabstop'* *'sts'*
@@ -6692,7 +6793,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	commands like "x" still work on the actual characters.
 	When 'sts' is zero, this feature is off.
 	When 'sts' is negative, the value of 'shiftwidth' is used.
-	'softtabstop' is set to 0 when the 'paste' option is set.
+	'softtabstop' is set to 0 when the 'paste' option is set and restored
+	when 'paste' is reset.
 	See also |ins-expandtab|.  When 'expandtab' is not set, the number of
 	spaces is minimized by using <Tab>s.
 	The 'L' flag in 'cpoptions' changes how tabs are used when 'list' is
@@ -6769,7 +6871,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	the two-letter, lower case region name.  You can use more than one
 	region by listing them: "en_us,en_ca" supports both US and Canadian
 	English, but not words specific for Australia, New Zealand or Great
-	Britain.
+	Britain. (Note: currently en_au and en_nz dictionaries are older than
+	en_ca, en_gb and en_us).
 	If the name "cjk" is included East Asian characters are excluded from
 	spell checking.  This is useful when editing text that also has Asian
 	words.
@@ -6905,7 +7008,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The option consists of printf style '%' items interspersed with
 	normal text.  Each status line item is of the form:
 	  %-0{minwid}.{maxwid}{item}
-	All fields except the {item} is optional.  A single percent sign can
+	All fields except the {item} are optional.  A single percent sign can
 	be given as "%%".  Up to 80 items can be specified.  *E541*
 
 	When the option starts with "%!" then it is used as an expression,
@@ -7013,7 +7116,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	become empty.  This will make a group like the following disappear
 	completely from the statusline when none of the flags are set. >
 		:set statusline=...%(\ [%M%R%H]%)...
-<
+<							*g:actual_curbuf*
 	Beware that an expression is evaluated each and every time the status
 	line is displayed.  The current buffer and current window will be set
 	temporarily to that of the window (and buffer) whose statusline is
@@ -7270,19 +7373,22 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	[The whitespace before and after the '0' must be a single <Tab>]
 
 	When a binary search was done and no match was found in any of the
-	files listed in 'tags', and 'ignorecase' is set or a pattern is used
+	files listed in 'tags', and case is ignored or a pattern is used
 	instead of a normal tag name, a retry is done with a linear search.
 	Tags in unsorted tags files, and matches with different case will only
 	be found in the retry.
 
 	If a tag file indicates that it is case-fold sorted, the second,
-	linear search can be avoided for the 'ignorecase' case.  Use a value
-	of '2' in the "!_TAG_FILE_SORTED" line for this.  A tag file can be
-	case-fold sorted with the -f switch to "sort" in most unices, as in
-	the command: "sort -f -o tags tags".  For "Exuberant ctags" version
-	5.x or higher (at least 5.5) the --sort=foldcase switch can be used
-	for this as well.  Note that case must be folded to uppercase for this
-	to work.
+	linear search can be avoided when case is ignored.  Use a value of '2'
+	in the "!_TAG_FILE_SORTED" line for this.  A tag file can be case-fold
+	sorted with the -f switch to "sort" in most unices, as in the command:
+	"sort -f -o tags tags".  For "Exuberant ctags" version 5.x or higher
+	(at least 5.5) the --sort=foldcase switch can be used for this as
+	well.  Note that case must be folded to uppercase for this to work.
+
+	By default, tag searches are case-sensitive.  Case is ignored when
+	'ignorecase' is set and 'tagcase' is "followic", or when 'tagcase' is
+	"ignore".
 
 	When 'tagbsearch' is off, tags searching is slower when a full match
 	exists, but faster when no full match exists.  Tags in unsorted tags
@@ -7294,6 +7400,16 @@ A jump table for the options with a short description can be found at |Q_op|.
 	command-line completion and ":help").
 	{Vi: always uses binary search in some versions}
 
+							*'tagcase'* *'tc'*
+'tagcase' 'tc'		string	(default "followic")
+			global or local to buffer |global-local|
+			{not in Vi}
+	This option specifies how case is handled when searching the tags
+	file:
+	   followic	Follow the 'ignorecase' option
+	   ignore	Ignore case
+	   match	Match case
+
 						*'taglength'* *'tl'*
 'taglength' 'tl'	number	(default 0)
 			global
@@ -7348,6 +7464,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Resetting this option is useful when using a ":tag" command in a
 	mapping which should not change the tagstack.
 
+						*'tcldll'*
+'tcldll'		string	(default depends on the build)
+			global
+			{not in Vi}
+			{only available when compiled with the |+tcl/dyn|
+			feature}
+	Specifies the name of the Tcl shared library. The default is
+	DYNAMIC_TCL_DLL, which was specified at compile time.
+	Environment variables are expanded |:set_env|.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
+
 						*'term'* *E529* *E530* *E531*
 'term'			string	(default is $TERM, if that fails:
 				      in the GUI: "builtin_gui"
@@ -7393,7 +7521,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	Encoding used for the terminal.  This specifies what character
 	encoding the keyboard produces and the display will understand.  For
-	the GUI it only applies to the keyboard ( 'encoding' is used for the
+	the GUI it only applies to the keyboard ('encoding' is used for the
 	display).  Except for the Mac when 'macatsui' is off, then
 	'termencoding' should be "macroman".
 								*E617*
@@ -7416,6 +7544,18 @@ A jump table for the options with a short description can be found at |Q_op|.
 		:set encoding=utf-8
 <	You need to do this when your system has no locale support for UTF-8.
 
+						*'termguicolors'* *'tgc'*
+'termguicolors' 'tgc'	boolean (default off)
+			global
+			{not in Vi}
+			{not available when compiled without the
+			|+termguicolors| feature}
+	When on, uses |highlight-guifg| and |highlight-guibg| attributes in
+	the terminal (thus using 24-bit color). Requires a ISO-8613-3
+	compatible terminal.
+	If setting this option does not work (produces a colorless UI)
+	reading |xterm-true-color| might help.
+
 						*'terse'* *'noterse'*
 'terse'			boolean	(default off)
 			global
@@ -7451,8 +7591,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not in Vi}
 	Maximum width of text that is being inserted.  A longer line will be
 	broken after white space to get this width.  A zero value disables
-	this.  'textwidth' is set to 0 when the 'paste' option is set.  When
-	'textwidth' is zero, 'wrapmargin' may be used.  See also
+	this.
+	'textwidth' is set to 0 when the 'paste' option is set and restored
+	when 'paste' is reset.
+	When 'textwidth' is zero, 'wrapmargin' may be used.  See also
 	'formatoptions' and |ins-textwidth|.
 	When 'formatexpr' is set it will be used to break the line.
 	NOTE: This option is set to 0 when 'compatible' is set.
@@ -7467,6 +7609,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	non-keyword characters (white space is preferred).  Maximum line
 	length is 510 bytes.
 	To obtain a file to be used here, check out this ftp site:
+	[Sorry this link doesn't work anymore, do you know the right one?] 
 	ftp://ftp.ox.ac.uk/pub/wordlists/  First get the README file.
 	To include a comma in a file name precede it with a backslash.  Spaces
 	after a comma are ignored, otherwise spaces are included in the file
@@ -7667,13 +7810,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 				{not in Vi}
 				{only in the GTK+ 2 GUI}
 	Controls the size of toolbar icons.  The possible values are:
-		tiny		Use tiny toolbar icons.
-		small		Use small toolbar icons (default).
-		medium		Use medium-sized toolbar icons.
-		large		Use large toolbar icons.
+		tiny		Use tiny icons.
+		small		Use small icons (default).
+		medium		Use medium-sized icons.
+		large		Use large icons.
+		huge		Use even larger icons.
+		giant		Use very big icons.
 	The exact dimensions in pixels of the various icon sizes depend on
-	the current theme.  Common dimensions are large=32x32, medium=24x24,
-	small=20x20 and tiny=16x16.
+	the current theme.  Common dimensions are giant=48x48, huge=32x32,
+	large=24x24, medium=24x24, small=20x20 and tiny=16x16.
 
 	If 'toolbariconsize' is empty, the global default size as determined
 	by user preferences or the current theme is used.
@@ -7991,9 +8136,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	%	When included, save and restore the buffer list.  If Vim is
 		started with a file name argument, the buffer list is not
 		restored.  If Vim is started without a file name argument, the
-		buffer list is restored from the viminfo file.  Buffers
-		without a file name and buffers for help files are not written
-		to the viminfo file.
+		buffer list is restored from the viminfo file.  Quickfix
+		('buftype'), unlisted ('buflisted'), unnamed and buffers on
+		removable media (|viminfo-r|) are not saved.
 		When followed by a number, the number specifies the maximum
 		number of buffers that are stored.  Without a number all
 		buffers are stored.
@@ -8474,6 +8619,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Options that add a margin, such as 'number' and 'foldcolumn', cause
 	the text width to be further reduced.  This is Vi compatible.
 	When 'textwidth' is non-zero, this option is not used.
+	This option is set to 0 when 'paste' is set and restored when 'paste'
+	is reset.
 	See also 'formatoptions' and |ins-textwidth|.  {Vi: works differently
 	and less usefully}
 

runtime/doc/os_390.txt

@@ -1,4 +1,4 @@
-*os_390.txt*    For Vim version 7.4.  Last change: 2010 May 30
+*os_390.txt*    For Vim version 7.4.  Last change: 2016 Feb 27
 
 
 		  VIM REFERENCE MANUAL	  by Ralf Schandl
@@ -108,7 +108,6 @@ Never tested:
     - Langmap			(|'langmap'|)
     - Python support		(|Python|)
     - Right-to-left mode	(|'rightleft'|)
-    - SNiFF+ interface		(|sniff|)
     - TCL interface		(|tcl|)
     ...
 

runtime/doc/os_beos.txt

@@ -1,4 +1,4 @@
-*os_beos.txt*	For Vim version 7.4.  Last change: 2010 Aug 14
+*os_beos.txt*	For Vim version 7.4.  Last change: 2016 Mar 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -248,8 +248,9 @@ reality.  Vim uses this mapping:
     Button 3 -> MiddleMouse.
 
 If your mouse has fewer than 3 buttons you can provide your own mapping from
-mouse clicks with modifier(s) to other mouse buttons.  See the file
-vim-5.x/macros/swapmous.vim for an example.		|gui-mouse-mapping|
+mouse clicks with modifier(s) to other mouse buttons.  See the swapmouse
+package for an example:					 |gui-mouse-mapping|
+$VIMRUNTIME/pack/dist/opt/swapmouse/plugin/swapmouse.vim
 
 
 12. Color names						*beos-colors*

runtime/doc/os_dos.txt

@@ -94,6 +94,7 @@ Shift-Insert	paste text (from clipboard)			*<S-Insert>*
 CTRL-Insert	copy Visual text (to clipboard)			*<C-Insert>*
 CTRL-Del	cut Visual text (to clipboard)			*<C-Del>*
 Shift-Del	cut Visual text (to clipboard)			*<S-Del>*
+CTRL-X		cut Visual text (to clipboard)
 
 These mappings accomplish this (Win32 and DJGPP versions of Vim):
 
@@ -102,6 +103,7 @@ Shift-Insert	<M-N><M-T>   "*P	"-d"*P      <C-R><C-O>*
 CTRL-Insert	<M-N><M-U>		"*y
 Shift-Del	<M-N><M-W>		"*d
 CTRL-Del	<M-N><M-X>		"*d
+CTRL-X		<C-X>			"*d
 
 Or these mappings (non-Win32 version of Vim):
 

runtime/doc/os_msdos.txt

@@ -1,276 +1,15 @@
-*os_msdos.txt*  For Vim version 7.4.  Last change: 2005 Mar 29
+*os_msdos.txt*  For Vim version 7.4.  Last change: 2016 Feb 26
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
 
 
 					*msdos* *ms-dos* *MSDOS* *MS-DOS*
-This file contains the particularities for the MS-DOS version of Vim.
+This file used to contain the particularities for the MS-DOS version of Vim.
+MS-DOS support was removed in patch 7.4.1399.  If you want to use it you will
+need to get a version older than that.  Note that the MS-DOS version doesn't
+work, there is not enough memory.  The DOS32 version (using DJGPP) might still
+work on older systems.
 
-1. Two versions for MS-DOS	|msdos-versions|
-2. Known problems		|msdos-problems|
-3. Long file names		|msdos-longfname|
-4. Termcap codes		|msdos-termcap|
-5. Shifted arrow keys		|msdos-arrows|
-6. Filename extensions		|msdos-fname-extensions|
-7. Memory usage and limitations	|msdos-limitations|
-8. Symbolically linked files	|msdos-linked-files|
-9. Copy/paste in a dos box	|msdos-copy-paste|
-
-Additionally, there are a number of common Win32 and DOS items:
-File locations			|dos-locations|
-Using backslashes		|dos-backslash|
-Standard mappings		|dos-standard-mappings|
-Screen output and colors	|dos-colors|
-File formats			|dos-file-formats|
-:cd command			|dos-:cd|
-Interrupting			|dos-CTRL-Break|
-Temp files			|dos-temp-files|
-Shell option default		|dos-shell|
-
-For compiling Vim see src/INSTALL.pc.			*msdos-compiling*
-
-==============================================================================
-1. Two versions for MS-DOS				*msdos-versions*
-
-There are two versions of Vim that can be used with MS-DOS machines:
-
-							*dos16*
-Dos16 version	Can be used on any MS-DOS system, only uses up to 640 Kbyte of
-		memory.  Also runs on OS/2, Windows 95, and NT.  Excludes some
-		Vim-specific features (autocommands, syntax highlighting,
-		etc.).  Recommended for use on pre-386 machines.
-							*dos32*
-Dos32 version	Requires 386 processor and a |DPMI| driver, uses all
-		available memory.  Supports long file names and the Windows
-		clipboard, but NOT on Windows NT.  Recommended for MS-DOS,
-		Windows 3.1 and Windows 95.
-
-There are also two versions that run under Windows:
-Win32 version   Requires Windows 95 or Windows NT, uses all available
-		memory, supports long file names, etc.  Has some problems on
-		Windows 95.  Recommended for Windows NT.  See |os_win32.txt|
-Win32 GUI	Requirements like the Win32 version, but runs in its own
-		window, instead of a console.  Has scrollbars, menu, etc.
-		Recommended for Windows 95 and Windows NT.  See |gui-w32|.
-
-It is recommended to use the Dos32 or Win32 version.  Although the Dos16
-version is able to edit very big files, it quickly runs out of memory when
-making big changes.  Disabling undo helps: ":set ul=-1".  The screen updating
-of the Dos16 version is the fastest of the three on DOS or Windows 95; on
-Windows NT, the Win32 version is just as fast.
-
-								*DPMI*
-For the Dos32 version, you may need a DPMI driver when running in MS-DOS.  If
-you are running Windows or installed a clever memory manager, it will probably
-work already.  If you get the message "No DPMI", you need to install a DPMI
-driver.  Such a driver is included with the executable in CSDPMI4B.ZIP.  Run
-"cwsdpmi" just before starting Vim each time.  Or you might want to include
-"cwsdpmi -p" in your autoexec.bat to make it resident.  The latest version of
-"CSDPMI*.ZIP" can be obtained from: "ftp.neosoft.com:pub/users/s/sandmann".
-
-							*minimal-features*
-The 16 bit DOS version has been compiled with minimal features.  Check the
-|+feature-list| which ones are included (marked with a "T").
-You can include more features by editing feature.h and recompiling.
-
-==============================================================================
-2. Known problems					*msdos-problems*
-
-When using smartdrive (MS-DOS 6.x) with write-behind caching, it is possible
-that Vim will try to create a swap file on a read-only file system (e.g.
-write protected floppy).  You will then be given the message >
-	A serious disk error has occurred .., Retry (r)?
-There is nothing you can do but unprotect the floppy or switch off the
-computer.  Even CTRL-ALT-DEL will not get you out of this.  This is really a
-problem of smartdrive, not Vim.  Smartdrive works fine otherwise.  If this
-bothers you, don't use the write-behind caching.
-
-Vim can't read swap files that have been opened already, unless the "share"
-command has been used.  If you see stray warnings for existing swap files,
-include the "share" command in your config.sys or autoexec.bat (see your MSDOS
-documentation).
-
-The Dos16 version can only have about 10 files open (in a window or hidden) at
-one time.  With more files you will get error messages when trying to read or
-write a file, and for filter commands.  Or Vim runs out of memory, and random
-problems may result.
-
-The Dos32 version cannot have an unlimited number of files open at any one
-time.  The limit depends on the setting of FILES in your CONFIG.SYS.  This
-defaults to 15; if you need to edit a lot of files, you should increase this.
-If you do not set FILES high enough, you can get strange errors, and shell
-commands may cause a crash!
-
-The Dos32 version can work with long file names.  When doing file name
-completion, matches for the short file name will also be found.  But this will
-result in the corresponding long file name.  For example, if you have the long
-file name "this_is_a_test" with the short file name "this_i~1", the command
-":e *1" will start editing "this_is_a_test".
-
-When using the Dos32 version and you run into problems with DPMI support,
-check if there is a program in your config.sys that eats resources.  One
-program known to cause this problem is "netx", which says "NetWare v. 3.26
-Workstation shell".  Replace it with version 3.32 to fix the problem.
-
-The Dos32 version will parse its arguments to handle quotation.  This is good
-to edit a file with spaces in its name, for example: >
-	vim "program files\accessories\ppp.scp"
-A side effect is that single quotes are removed.  Insert a backslash to avoid
-that.  For example, to edit the file "fi'le.txt": >
-	vim fi\'le.txt
-
-==============================================================================
-3. Long file names					*msdos-longfname*
-
-If the Dos32 version is run on Windows 95, it can use long file names.  It
-will work by default.  If you want to disable this, use this setting:
-	set LFN=N
-You can put this in your autoexec.bat file.
-
-Note: If you have installed DJGPP on your machine, you probably have a
-"djgpp.env" file, which contains "LFN=n".  You need to use "LFN=Y" to switch
-on using long file names then.
-
-==============================================================================
-4. Termcap codes					*msdos-termcap*
-
-If you want to use another output method (e.g., when using a terminal on a COM
-port), set the terminal name to "pcansi".  You can change the termcap options
-when needed (see |terminal-options|).  Note that the
-normal IBM ansi.sys does not support all the codes of the builtin pcansi
-terminal.  If you use ansi.sys, you will need to delete the termcap entries
-t_al and t_dl with >
-   :set t_al= t_dl=
-Otherwise, the screen will not be updated correctly.  It is better to use
-nansi.sys, nnansi.sys, or the like instead of ansi.sys.
-
-If you want to use Vim on a terminal connected to a COM: port, reset the
-'bioskey' option.  Otherwise the commands will be read from the PC keyboard.
-CTRL-C and CTRL-P may not work correctly with 'bioskey' reset.
-
-==============================================================================
-5. Shifted arrow keys					*msdos-arrows*
-
-Use CTRL-arrow-left and CTRL-arrow-right instead of SHIFT-arrow-left and
-SHIFT-arrow-right.  The arrow-up and arrow-down cannot be used with SHIFT or
-CTRL.
-
-==============================================================================
-6. Filename extensions				*msdos-fname-extensions*
-
-MS-DOS allows for only one file name extension.  Therefore, when appending an
-extension, the '.' in the original file name is replaced with a '_', the name
-is truncated to 8 characters, and the new extension (e.g., ".swp") is
-appended.  Two examples: "test.c" becomes "test_c.bak", "thisisat.est"
-becomes "thisisat.bak".  To reduce these problems, the default for
-'backupext' is "~" instead of ".bak".  The backup file for "thisisat.est"
-then becomes "thisisat.es~".  The 'shortname' option is not available,
-because it would always be set.
-
-==============================================================================
-7. Memory usage and limitations			*msdos-limitations*
-
-A swap file is used to store most of the text.  You should be able to edit
-very large files.  However, memory is used for undo and other things.  If you
-delete a lot of text, you can still run out of memory in the Dos16 version.
-
-If Vim gives an "Out of memory" warning, you should stop editing.  The result
-of further editing actions is unpredictable.  Setting 'undolevels' to 0 saves
-some memory.  Running the maze macros on a big maze is guaranteed to run out
-of memory, because each change is remembered for undo.  In this case set
-'undolevels' to a negative number.  This will switch off undo completely.
-
-						*msdos-clipboard-limits*
-In the Dos32 version, extended memory is used to avoid these problems.
-However, if you are using the clipboard, you can still run into memory
-limitations because the Windows clipboard can only communicate with Vim using
-Dos memory.  This means that the largest amount of text that can be sent to
-or received from the Windows clipboard is limited by how much free Dos memory
-is available on your system.
-
-You can usually maximize the amount of available Dos memory by adding the
-following lines to Dos's "config.sys" file: >
-
-	DOS=HIGH,UMB
-	DEVICE=C:\WINDOWS\himem.sys
-	DEVICE=C:\WINDOWS\emm386.exe RAM
-
-Modifying config.sys in this way will also help to make more memory available
-for the Dos16 version, if you are using that.
-
-In the Dos16 version the line length is limited to about 32000 characters.
-When reading a file the lines are automatically split.  But editing a line
-in such a way that it becomes too long may give unexpected results.
-
-==============================================================================
-8. Symbolically linked files			*msdos-linked-files*
-
-When using Vim to edit a symbolically linked file on a unix NFS file server,
-you may run into problems.  When writing the file, Vim does not "write
-through" the symlink.  Instead, it deletes the symbolic link and creates a new
-file in its place.
-
-On Unix, Vim is prepared for links (symbolic or hard).  A backup copy of the
-original file is made and then the original file is overwritten.  This assures
-that all properties of the file remain the same.  On non-Unix systems, the
-original file is renamed and a new file is written.  Only the protection bits
-are set like the original file.  However, this doesn't work properly when
-working on an NFS-mounted file system where links and other things exist.  The
-only way to fix this in the current version is not making a backup file, by
-":set nobackup nowritebackup"	|'writebackup'|
-
-A similar problem occurs when mounting a Unix filesystem through Samba or a
-similar system.  When Vim creates a new file it will get the default user ID
-for the mounted file system.  This may be different from the original user ID.
-To avoid this set the 'backupcopy' option to "yes".
-
-==============================================================================
-9. Copy/paste in a dos box			*msdos-copy-paste*
-
-					*E450* *E451* *E452* *E453* *E454*
-The 32 bit version can copy/paste from/to the Windows clipboard directly.  Use
-the "* register.  Large amounts of text can be copied this way, but it must be
-possible to allocate memory for it, see |msdos-clipboard-limits|.  When moving
-text from one Vim to another, the type of the selection
-(characterwise/linewise/blockwise) is passed on.
-
-In other versions, the following can be used.
-
-(posted to comp.editors by John Velman <velman@igate1.hac.com>)
-
-How to copy/paste text from/to vim in a dos box:
-
-1) To get VIM to run in a window, instead of full screen, press alt+enter.
-   This toggles back and forth between full screen and a dos window.
-   NOTE: In Windows 95 you must have the property "Fast Pasting" unchecked!
-   In the properties dialog box for the MS-DOS window, go to "MS-DOS
-   Prompt/Misc/Fast pasting" and make sure that it is NOT checked.
-   To make this permanent, change the properties for
-   "\windows\system\conagent.exe" (from Philip Nelson, unverified).
-
-2) To paste something _into_ Vim, put Vim in insert mode.
-
-3) Put the text you want to paste on the windows clipboard.
-
-4) Click the control box in the upper left of the Vim window.  (This looks
-   like a big minus sign.)  If you don't want to use the mouse, you can get
-   this with alt+spacebar.
-5) On the resulting dropdown menu choose "Edit".
-6) On the child dropdown menu choose "Paste".
-
-To copy something from the Vim window to the clipboard,
-
-1) Select the control box to get the control drop down menu.
-2) Select "Edit".
-3) Select "Mark".
-4) Using either the keys or the mouse, select the part of the Vim window that
-   you want to copy.  To use the keys, use the arrow keys, and hold down shift
-   to extend the selection.
-5) When you've completed your selection, press 'enter'.  The selection
-   is now in the windows clipboard.  By the way, this can be any
-   rectangular selection, for example columns 4-25 in rows 7-10.  It can
-   include anything in the VIM window: the output of a :!dir, for
-   example.
 
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/os_os2.txt

@@ -1,221 +1,13 @@
-*os_os2.txt*    For Vim version 7.4.  Last change: 2007 Apr 22
+*os_os2.txt*    For Vim version 7.4.  Last change: 2015 Dec 31
 
 
 		  VIM REFERENCE MANUAL    by Paul Slootman
 
 
 							*os2* *OS2* *OS/2*
-This file contains the particularities for the OS/2 version of Vim.
+This file used to contain the particularities for the OS/2 version of Vim.
 
-At present there is no native PM version of the GUI version of Vim: The OS/2
-version is a console application.  However, there is now a Win32s-compatible
-GUI version, which should be usable by owners of Warp 4 (which supports
-Win32s) in a Win-OS/2 session.  The notes in this file refer to the native
-console version.
+The OS/2 support was removed in patch 7.4.1008.
 
 
-NOTE
-
-This OS/2 port works well for me and a couple of other OS/2 users; however,
-since I haven't had much feedback, that either means no (OS/2-specific) bugs
-exist (besides the ones mentioned below), or no one has yet created a
-situation in which any bugs are apparent.  File I/O in Dos and Unix mode,
-binary mode, and FAT handling all seem to work well, which would seem to be
-the most likely places for trouble.
-
-A known problem is that files opened by Vim are inherited by other programs
-that are started via a shell escape from within Vim.  This specifically means
-that Vim won't be able to remove the swap file(s) associated with buffers open
-at the time the other program was started, until the other program is stopped.
-At that time, the swap file may be removed, but if Vim could not do that the
-first time, it won't be removed at all.  You'll get warnings that some other
-Vim session may be editing the file when you start Vim up again on that file.
-This can be reproduced with ":!start epm".  Now quit Vim, and start Vim again
-with the file that was in the buffer at the time epm was started.  I'm working
-on this!
-
-A second problem is that Vim doesn't understand the situation when using it
-when accessing the OS/2 system via the network, e.g. using telnet from a Unix
-system, and then starting Vim.  The problem seems to be that OS/2 =sometimes=
-recognizes function / cursor keys, and tries to convert those to the
-corresponding OS/2 codes generated by the "normal" PC keyboard.  I've been
-testing a workaround (mapping the OS/2 codes to the correct functions), but so
-far I can't say anything conclusive (this is on Warp 3, by the way).  In the
-meantime any help will be appreciated.
-
-
-PREREQUISITES
-
-To run Vim, you need the emx runtime environment (at least rev. 0.9b).  This
-is generally available as (ask Archie about it):
-
-    emxrt.zip     emx runtime package
-
-I've included a copy of emx.dll, which should be copied to one of the
-directories listed in your LIBPATH.  Emx is GPL'ed, but the emx.dll library is
-not (read COPYING.EMX to find out what that means to you).
-
-This emx.dll is from the emxfix04.zip package, which unfortunately has a bug,
-eh, I mean a POSIX feature, in select().  Versions of Vim before 3.27 will
-appear to hang when starting (actually, while processing vimrc).  Hit <Enter> a
-couple of times until Vim starts working if this happens.  Next, get an up to
-date version of Vim!
-
-
-HELP AND VIMRC FILE
-
-If you unpack the archive that Vim came in and run Vim directly from where it
-was unpacked, Vim should be able to find the runtime files and your .vimrc
-without any settings.
-
-If you put the runtime files separately from the binary, the VIM environment
-variable is used to find the location of the help files and the system .vimrc.
-Place an entry such as this in CONFIG.SYS: >
-
-  SET VIM=c:/local/lib/vim
-
-Put your .vimrc and your other Vim files in this directory.  Copy the runtime
-directory to this directory.  Each version of Vim has its own runtime
-directory.  It will be called something like "c:/local/lib/vim/vim54".  Thus
-you get a tree of Vim files like this:
-	c:/local/lib/vim/.vimrc
-	c:/local/lib/vim/vim54/filetype.vim
-	c:/local/lib/vim/vim54/doc/help.txt
-	etc.
-
-Note: .vimrc may also be called _vimrc to accommodate those who have chosen to
-install OS/2 on a FAT file system.  Vim first tries to find .vimrc and if that
-fails, looks for _vimrc in the same place.  The existence of a .vimrc or
-_vimrc file influences the 'compatible' options, which can have unexpected side
-effects.  See |'compatible'|.
-
-If you're using network drives with OS/2, then you can install Vim on a
-network drive (including .vimrc; this is then called the "system" vimrc file),
-and then use a personal copy of .vimrc (the "user" vimrc file).  This should be
-located in a directory indicated by the HOME environment variable.
-
-
-ENVIRONMENT VARIABLES IN FILE NAMES
-
-This HOME environment variable is also used when using ~ in file names, so
-":e ~/textfile" will edit the file "textfile" in the directory referred to by
-HOME.  Additionally you can use other environment variables in file names, as
-in ":n $SRC/*.c".
-
-The HOME environment variable is also used to locate the .viminfo file
-(see |viminfo-file|).  There is no support yet for .viminfo on FAT file
-systems yet, sorry.  You could try the -i startup flag (as in "vim -i
-$HOME/_viminfo") however.
-
-If the HOME environment variable is not set, the value "C:/" is used as a
-default.
-
-
-BACKSLASHES
-
-Using slashes ('/') and backslashes ('\') can be a bit of a problem (see
-|dos-backslash| for more explanation), but in almost all cases Vim does "The
-Right Thing".  Vim itself uses backslashes in file names, but will happily
-accept forward slashes if they are entered (in fact, sometimes that works
-better!).
-
-
-TEMP FILES
-
-Temporary files (for filtering) are put in the first directory in the next
-list that exists and where a file can be created:
-	$TMP
-	$TEMP
-	C:\TMP
-	C:\TEMP
-	current directory
-
-
-TERMINAL SETTING
-
-							*os2ansi*
-Use "os2ansi" as the TERM environment variable (or don't set it at all, as the
-default is the correct value).  You can set term to os2ansi in the .vimrc, in
-case you need TERM to be a different value for other applications.  The
-problem is that OS/2 ANSI emulation is quite limited (it doesn't have insert /
-delete line, for example).
-
-If you want to use a different value for TERM (because of other programs, for
-example), make sure that the termcap entry for that TERM value has the
-appropriate key mappings.  The termcap.dat distributed with emx does not always
-have them.  Here are some suitable values to add to the termcap entry of your
-choice; these allow the cursor keys and the named function keys (such as
-pagedown) to work.
-
-	:ku=\316H:kd=\316P:kl=\316K:kr=\316M:%i=\316t:#4=\316s:\
-	:kD=\316S:kI=\316R:kN=\316Q:kP=\316I:kh=\316G:@7=\316O:\
-	:k1=\316;:k2=\316<:k3=\316=:k4=\316>:k5=\316?:k6=\316@:\
-	:k7=\316A:k8=\316B:k9=\316C:k;=\316D:
-
-
-Paul Slootman
-
-
-43 LINE WINDOW
-
-A suggestion from Steven Tryon, on how to run Vim in a bigger window:
-
-When I call Vim from an OS/2 WPS application such as PMMail it comes up
-in the default 25-line mode.  To get a more useful window size I make
-my external editor "vimbig.cmd" which in turn calls "vimbig2.cmd".
-Brute force and awkwardness, perhaps, but it works.
-
-vimbig.cmd: >
-   @echo off
-   start "Vi Improved" /f vimbig2.cmd %1 %2 %3 %4
-
-vimbig2.cmd: >
-   @echo off
-   mode 80,43
-   vim.exe %1 %2 %3 %4
-   exit
-<
-
-CLIPBOARD ACCESS (provided by Alexander Wagner)
-
-Vim for OS/2 has no direct access to the system clipboard.  To enable access
-anyway you need an additional tool which gives you access to the clipboard
-from within a vio application.  The freeware package clipbrd.zip by Stefan
-Gruendel can be used for this purpose.  You might download the package
-including precompiled binaries and all sources from:
-	http://www.os2site.com/sw/util/clipboard/index.html
-	http://download.uni-hd.de/ftp/pub/os2/pmtools/
-
-Installation of this package is straight forward: just put the two executables
-that come with this package into a directory within your PATH for Vim should
-be able to call them from whatever directory you are working.
-
-To copy text from the clipboard to your Vim session you can use the :r
-command.  Simply call clipbrd.exe from within Vim in the following way: >
-
-	:r !clipbrd -r
-
-To copy text from Vim to the system clipboard just mark the text in the usual
-vim-manner and call: >
-
-	:!clipbrd -w
-
-which will write your selection right into OS/2's clipboard.
-
-For ease of use you might want to add some maps for these commands.  E.g. to
-use F11 to paste the clipboard into Vim and F12 to copy selected text to the
-clipboard you would use: >
-
-	if has("os2")
-	  imap <F11>     <ESC>:r !clipbrd -r<CR>i
-	  vmap <F12>     :!clipbrd -w<cr>
-	else
-	  imap <F11>     <ESC>"*p<CR>i
-	  vmap <F12>     "*y
-	endif
-
-This will ensure that only on OS/2 clipbrd is called whereas on other
-platforms vims build in mechanism is used.  (To enable this functions on every
-load of Vim place the above lines in your .vimrc.)
-
  vim:tw=78:ts=8:ft=help:norl:

runtime/doc/os_win32.txt

@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 7.4.  Last change: 2014 Sep 25
+*os_win32.txt*  For Vim version 7.4.  Last change: 2016 Mar 05
 
 
 		  VIM REFERENCE MANUAL    by George Reilly
@@ -96,6 +96,31 @@ The directory of the Vim executable is appended to $PATH.  This is mostly to
 make "!xxd" work, as it is in the Tools menu.  And it also means that when
 executable() returns 1 the executable can actually be executed.
 
+Quotes in file names					*win32-quotes*
+
+Quotes inside a file name (or any other command line argument) can be escaped
+with a backslash.  E.g. >
+	vim -c "echo 'foo\"bar'"
+
+Alternatively use three quotes to get one: >
+	vim -c "echo 'foo"""bar'"
+
+The quotation rules are:
+
+1. A `"` starts quotation.
+2. Another `"` or `""` ends quotation. If the quotation ends with `""`, a `"`
+   is produced at the end of the quoted string.
+
+Examples, with [] around an argument:
+        "foo"           -> [foo]
+        "foo""          -> [foo"]
+        "foo"bar        -> [foobar]
+        "foo" bar       -> [foo], [bar]
+        "foo""bar       -> [foo"bar]
+        "foo"" bar      -> [foo"], [bar]
+        "foo"""bar"     -> [foo"bar]
+
+
 ==============================================================================
 3. Restore screen contents				*win32-restore*