patch 8.0.1338: USE_IM_CONTROL is confusing and incomplete

Problem:    USE_IM_CONTROL is confusing and incomplete.
Solution:   Just use FEAT_MBYTE.  Call 'imactivatefunc' also without GUI.

Filelist

@@ -141,6 +141,7 @@ SRC_ALL =	\
 		src/testdir/xterm_ramp.vim \
 		src/proto.h \
 		src/proto/arabic.pro \
+		src/proto/beval.pro \
 		src/proto/blowfish.pro \
 		src/proto/buffer.pro \
 		src/proto/channel.pro \

runtime/doc/debugger.txt

@@ -1,4 +1,4 @@
-*debugger.txt*  For Vim version 8.0.  Last change: 2005 Mar 29
+*debugger.txt*  For Vim version 8.0.  Last change: 2017 Nov 21
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -95,10 +95,12 @@ list and colors can be set via X resources (XmNballoonEvalFontList,
 XmNballoonEvalBackground, and XmNballoonEvalForeground).
 The 'balloondelay' option sets the delay before an attempt is made to show a
 balloon.
-The 'ballooneval' option needs to be set to switch it on.
+The 'ballooneval' and/or the 'balloonevalterm' option needs to be set to
+switch it on.
 
-Balloon evaluation is only available when compiled with the |+balloon_eval|
-feature.
+Balloon evaluation is only available in the GUI when compiled with the
+|+balloon_eval| feature.  For the terminal the  |+balloon_eval_term| feature
+matters.
 
 The Balloon evaluation functions are also used to show a tooltip for the
 toolbar.  The 'ballooneval' option does not need to be set for this.  But the

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.0.  Last change: 2017 Aug 21
+*editing.txt*   For Vim version 8.0.  Last change: 2017 Nov 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -900,7 +900,7 @@ Note: When the 'write' option is off, you are not able to write any file.
 
 							*:w* *:write*
 						*E502* *E503* *E504* *E505*
-						*E512* *E514* *E667* *E796*
+						*E512* *E514* *E667* *E796* *E949*
 :w[rite] [++opt]	Write the whole buffer to the current file.  This is
 			the normal way to save changes to a file.  It fails
 			when the 'readonly' option is set or when there is
@@ -956,6 +956,9 @@ used, for example, when the write fails and you want to try again later with
 ":w #".  This can be switched off by removing the 'A' flag from the
 'cpoptions' option.
 
+Note that the 'fsync' option matters here.  If it's set it may make writes
+slower (but safer).
+
 							*:sav* *:saveas*
 :sav[eas][!] [++opt] {file}
 			Save the current buffer under the name {file} and set

runtime/doc/eval.txt

@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.0.  Last change: 2017 Nov 16
+*eval.txt*	For Vim version 8.0.  Last change: 2017 Nov 19
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -2748,6 +2748,8 @@ bufexists({expr})					*bufexists()*
 		The result is a Number, which is |TRUE| if a buffer called
 		{expr} exists.
 		If the {expr} argument is a number, buffer numbers are used.
+		Number zero is the alternate buffer for the current window.
+
 		If the {expr} argument is a string it must match a buffer name
 		exactly.  The name can be:
 		- Relative to the current directory.

runtime/doc/mbyte.txt

@@ -26,8 +26,9 @@ For changing the language of messages and menus see |mlang.txt|.
 7.  Input on X11			|mbyte-XIM|
 8.  Input on MS-Windows			|mbyte-IME|
 9.  Input with a keymap			|mbyte-keymap|
-10. Using UTF-8				|mbyte-utf8|
-11. Overview of options			|mbyte-options|
+10. Input with imactivatefunc()		|mbyte-func|
+11. Using UTF-8				|mbyte-utf8|
+12. Overview of options			|mbyte-options|
 
 NOTE: This file contains UTF-8 characters.  These may show up as strange
 characters or boxes when using another encoding.
@@ -1254,7 +1255,35 @@ Combining forms:
 ﭏ    0xfb4f  Xal  alef-lamed
 
 ==============================================================================
-10. Using UTF-8				*mbyte-utf8* *UTF-8* *utf-8* *utf8*
+10.  Input with imactivatefunc()				*mbyte-func*
+
+Vim has |imactivatefunc()| and |imstatusfunc()|. This is useful to
+activate/deativate input method from Vim in any way, also with an external
+command. For example, fcitx provide fcitx-remote command: >
+
+	set iminsert=2
+	set imsearch=2
+	set imcmdline
+
+	set imactivatefunc=ImActivate
+	function! ImActivate(active)
+	  if a:active
+	    call system('fcitx-remote -o')
+	  else
+	    call system('fcitx-remote -c')
+	  endif
+	endfunction
+
+	set imstatusfunc=ImStatus
+	function! ImStatus()
+	  return system('fcitx-remote')[0] is# '2'
+	endfunction
+
+Using this script, you can activate/deactivate XIM via Vim even when it is not
+compiled with |+xim|.
+
+==============================================================================
+11. Using UTF-8				*mbyte-utf8* *UTF-8* *utf-8* *utf8*
 							*Unicode* *unicode*
 The Unicode character set was designed to include all characters from other
 character sets.  Therefore it is possible to write text in any language using
@@ -1402,7 +1431,7 @@ not everybody is able to type a composing character.
 
 
 ==============================================================================
-11. Overview of options					*mbyte-options*
+12. Overview of options					*mbyte-options*
 
 These options are relevant for editing multi-byte files.  Check the help in
 options.txt for detailed information.

runtime/doc/options.txt

@@ -4256,8 +4256,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imactivatefunc' 'imaf'	string (default "")
 			global
 			{not in Vi}
-			{only available when compiled with |+xim| and
-			|+GUI_GTK|}
+			{only available when compiled with |+mbyte|}
 	This option specifies a function that will be called to
 	activate/inactivate Input Method.
 
@@ -4308,8 +4307,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imcmdline' 'imc'	boolean (default off)
 			global
 			{not in Vi}
-			{only available when compiled with the |+xim|,
-			|+multi_byte_ime| or |global-ime| features}
+			{only available when compiled with |+mbyte|}
 	When set the Input Method is always on when starting to edit a command
 	line, unless entering a search pattern (see 'imsearch' for that).
 	Setting this option is useful when your input method allows entering
@@ -4320,8 +4318,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imdisable' 'imd'	boolean (default off, on for some systems (SGI))
 			global
 			{not in Vi}
-			{only available when compiled with the |+xim|,
-			|+multi_byte_ime| or |global-ime| features}
+			{only available when compiled with |+mbyte|}
 	When set the Input Method is never used.  This is useful to disable
 	the IM when it doesn't work properly.
 	Currently this option is on by default for SGI/IRIX machines.  This
@@ -4336,8 +4333,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 		0	:lmap is off and IM is off
 		1	:lmap is ON and IM is off
 		2	:lmap is off and IM is ON
-	2 is available only when compiled with the |+multi_byte_ime|, |+xim|
-	or |global-ime|.
 	To always reset the option to zero when leaving Insert mode with <Esc>
 	this can be used: >
 		:inoremap <ESC> <ESC>:set iminsert=0<CR>
@@ -4350,6 +4345,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The value 0 may not work correctly with Athena and Motif with some XIM
 	methods.  Use 'imdisable' to disable XIM then.
 
+	You can set 'imactivatefunc' and 'imstatusfunc' to handle IME/XIM
+	via external command if vim is not compiled with the |+xim|,
+	|+multi_byte_ime| or |global-ime|.
+
 						*'imsearch'* *'ims'*
 'imsearch' 'ims'	number (default -1)
 			local to buffer
@@ -4372,8 +4371,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'imstatusfunc' 'imsf'	string (default "")
 			global
 			{not in Vi}
-			{only available when compiled with |+xim| and
-			|+GUI_GTK|}
+			{only available when compiled with |+mbyte|}
 	This option specifies a function that is called to obtain the status
 	of Input Method.  It must return a positive number when IME is active.
 

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 8.0.  Last change: 2017 Oct 19
+*quickref.txt*  For Vim version 8.0.  Last change: 2017 Nov 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -618,7 +618,8 @@ Short explanation of each option:		*option-list*
 'backupext'	  'bex'     extension used for the backup file
 'backupskip'	  'bsk'     no backup for files that match these patterns
 'balloondelay'	  'bdlay'   delay in mS before a balloon may pop up
-'ballooneval'	  'beval'   switch on balloon evaluation
+'ballooneval'	  'beval'     switch on balloon evaluation in the GUI
+'balloonevalterm' 'bevalterm' switch on balloon evaluation in the terminal
 'balloonexpr'	  'bexpr'   expression to show in balloon
 'belloff'	  'bo'	    do not ring the bell for these reasons
 'binary'	  'bin'     read/write/edit file in binary mode

runtime/doc/remote.txt

@@ -1,4 +1,4 @@
-*remote.txt*    For Vim version 8.0.  Last change: 2017 Aug 01
+*remote.txt*    For Vim version 8.0.  Last change: 2017 Nov 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -181,7 +181,8 @@ name on the 'VimRegistry' property on the root window.
 
 A non GUI Vim with access to the X11 display (|xterm-clipboard| enabled), can
 also act as a command server if a server name is explicitly given with the
---servername argument.
+--servername argument, or when Vim was build with the |+autoservername|
+feature.
 
 An empty --servername argument will cause the command server to be disabled.
 

runtime/doc/starting.txt

@@ -1,4 +1,4 @@
-*starting.txt*  For Vim version 8.0.  Last change: 2017 Nov 11
+*starting.txt*  For Vim version 8.0.  Last change: 2017 Nov 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -58,9 +58,9 @@ filename	One or more file names.  The first one will be the current
 		that is read from stdin.  The commands that would normally be
 		read from stdin will now be read from stderr.  Example: >
 			find . -name "*.c" -print | vim -
-<		The buffer will be marked modified, because it contains text
-		that needs to be saved.  Except when in readonly mode, then
-		the buffer is not marked modified.  Example: >
+<		The buffer will not be marked as modified, so that it's easy
+		to exit.  Be careful to mark it as modified if you don't want
+		to accidentally lose it.  Example: >
 			ls | view -
 <
 		Starting in Ex mode: >
@@ -421,7 +421,9 @@ a slash.  Thus "-R" means recovery and "-/R" readonly.
 							*--not-a-term*
 --not-a-term	Tells Vim that the user knows that the input and/or output is
 		not connected to a terminal.  This will avoid the warning and
-		the two second delay that would happen. {not in Vi}
+		the two second delay that would happen.
+		Also avoids the "Reading from stdin..." message.
+		{not in Vi}
 
 							*--ttyfail*
 --ttyfail	When the stdin or stdout is not a terminal (tty) then exit

runtime/doc/tags

@@ -74,12 +74,14 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'backupskip'	options.txt	/*'backupskip'*
 'balloondelay'	options.txt	/*'balloondelay'*
 'ballooneval'	options.txt	/*'ballooneval'*
+'balloonevalterm'	options.txt	/*'balloonevalterm'*
 'balloonexpr'	options.txt	/*'balloonexpr'*
 'bdir'	options.txt	/*'bdir'*
 'bdlay'	options.txt	/*'bdlay'*
 'beautify'	vi_diff.txt	/*'beautify'*
 'belloff'	options.txt	/*'belloff'*
 'beval'	options.txt	/*'beval'*
+'bevalterm'	options.txt	/*'bevalterm'*
 'bex'	options.txt	/*'bex'*
 'bexpr'	options.txt	/*'bexpr'*
 'bf'	vi_diff.txt	/*'bf'*
@@ -505,7 +507,9 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 'noawa'	options.txt	/*'noawa'*
 'nobackup'	options.txt	/*'nobackup'*
 'noballooneval'	options.txt	/*'noballooneval'*
+'noballoonevalterm'	options.txt	/*'noballoonevalterm'*
 'nobeval'	options.txt	/*'nobeval'*
+'nobevalterm'	options.txt	/*'nobevalterm'*
 'nobin'	options.txt	/*'nobin'*
 'nobinary'	options.txt	/*'nobinary'*
 'nobiosk'	options.txt	/*'nobiosk'*
@@ -1223,7 +1227,9 @@ $VIM_POSIX	vi_diff.txt	/*$VIM_POSIX*
 +acl	various.txt	/*+acl*
 +arabic	various.txt	/*+arabic*
 +autocmd	various.txt	/*+autocmd*
++autoservername	various.txt	/*+autoservername*
 +balloon_eval	various.txt	/*+balloon_eval*
++balloon_eval_term	various.txt	/*+balloon_eval_term*
 +browse	various.txt	/*+browse*
 +builtin_terms	various.txt	/*+builtin_terms*
 +byte_offset	various.txt	/*+byte_offset*
@@ -4569,6 +4575,7 @@ E945	pattern.txt	/*E945*
 E946	terminal.txt	/*E946*
 E947	terminal.txt	/*E947*
 E948	terminal.txt	/*E948*
+E949	editing.txt	/*E949*
 E95	message.txt	/*E95*
 E96	diff.txt	/*E96*
 E97	diff.txt	/*E97*
@@ -5145,6 +5152,7 @@ backup-extension	version4.txt	/*backup-extension*
 backup-table	editing.txt	/*backup-table*
 balloon-eval	debugger.txt	/*balloon-eval*
 balloon_show()	eval.txt	/*balloon_show()*
+balloon_split()	eval.txt	/*balloon_split()*
 bar	motion.txt	/*bar*
 bars	help.txt	/*bars*
 base_font_name_list	mbyte.txt	/*base_font_name_list*

runtime/doc/terminal.txt

@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 8.0.  Last change: 2017 Nov 12
+*terminal.txt*	For Vim version 8.0.  Last change: 2017 Nov 17
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -106,6 +106,10 @@ BufWinEnter autocommand event is triggered.  This makes it possible to set
 options specifically for the window and buffer.  Example: >
    au BufWinEnter * if &buftype == 'terminal' | setlocal bufhidden=hide | endif
 
+Mouse events (click and drag) are passed to the terminal.  Mouse move events
+are only passed when Vim itself is receiving them.  For a terminal that is
+when 'balloonevalterm' is enabled.
+
 
 Size and color ~
 							*terminal-size-color*
@@ -335,6 +339,9 @@ to point to the right file, if needed.  If you have both the 32-bit and 64-bit
 version, rename to winpty32.dll and winpty64.dll to match the way Vim was
 build.
 
+Environment variables are used to pass information to the running job:
+    VIM_SERVERNAME	v:servername
+
 ==============================================================================
 2. Remote testing					*terminal-testing*
 

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.0.  Last change: 2017 Nov 11
+*todo.txt*      For Vim version 8.0.  Last change: 2017 Nov 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -35,10 +35,6 @@ entered there will not be repeated below, unless there is extra information.
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-Permission of viminfo tempfile can be wrong. (Simon Ruderich)
-Always use 600 ?  Also avoids groups problem.
-patch from Simon Ruderich, Nov 8
-
 No maintainer for Vietnamese translations.
 No maintainer for Simplified Chinese translations.
 
@@ -49,10 +45,6 @@ Terminal emulator window:
     - Implement the right-click popup menu for the terminal. Can use the
       completion popup menu code and mouse dragging.
       Use it for "set breakpoint", "remove breakpoint", etc.
-    - make showballoon() work in a terminal.  Requires getting mouse-move
-      events.
-    - send 'balloonText' events for the cursor position (using CursorHold ?)
-      in terminal mode.
   - get ideas from http://clewn.sf.net
   - Look into the idevim plugin/script.
 - Improve testing:
@@ -88,6 +80,8 @@ Terminal emulator window:
     Although user could use "xterm -e 'cmd arg'".
 
 Regexp problems:
+- When search pattern has the base character both with and without combining
+  character, search fails.  E.g. "รรีบ" in "การรีบรักใคร". (agguser, #2312)
 - [:space:] only matches ASCII spaces.  Add [:white:] for all space-like
   characters, esp. including 0xa0.  Use character class zero.
 - Since 7.4.704 the old regex engine fails to match [[:print:]] in 0xf6.
@@ -136,7 +130,7 @@ Regexp problems:
 Include a few color schemes, based on popularity:
 http://www.vim.org/scripts/script_search_results.php?keywords=&script_type=color+scheme&order_by=rating&direction=descending&search=search
 http://vimawesome.com/?q=tag:color-scheme
-Use names that indicate their apperance (Christian Brabandt, 2017 Aug 3)
+Use names that indicate their appearance (Christian Brabandt, 2017 Aug 3)
 - monokai - Xia Crusoe (2017 Aug 4) 
 - seoul256 - Christian Brabandt (2017 Aug 3)
 - gruvbox -  Christian Brabandt (2017 Aug 3)
@@ -147,6 +141,7 @@ Suggested by Hiroki Kokubun:
 - [hybrid](https://github.com/w0ng/vim-hybrid)
 Include solarized color scheme?, it does not support termguicolors.
 -> Make check for colorscheme that it's sane.
+- Sanitized version of pablo (Lifepillar, 2017 Nov 21)
 
 Compiler warnings (geeknik, 2017 Oct 26):
 - signed integer overflow in do_sub() (#2249)
@@ -155,6 +150,13 @@ Compiler warnings (geeknik, 2017 Oct 26):
 - signed integer overflow in nfa_regatom() (#2251)
 - undefined left shift in get_string_tv() (#2250)
 
+Patch to use imactivatefunc() also without +xim feature. (Yasuhiro Matsumoto,
+2017 Nov 19, #2349)
+
+'hlsearch' shows empty matches, which means highlighting everything.
+Don't do that.  For "foo\|" or "\v"
+Patch from Christian, 2017 Nov 14.  Should still display "$" matches.
+
 When starting with --clean packages under "start" are not loaded.  Make this
 work:  :packadd START {name}  similar to :runtime START name
 
@@ -169,6 +171,12 @@ With foldmethod=syntax and nofoldenable comment highlighting isn't removed.
 Using 'wildignore' also applies to literally entered file name.  Also with
 :drop (remote commands).
 
+Race condition between stat() and open() in write_viminfo(). Use open() in the
+loop and try another name instead of using a temp file. (Simon Ruderich)
+The first one, when viminfo is new, should just fail if it creating with
+O_EXCL fails.
+Also use umask instead of mch_fopen() after vim_tempname().
+
 "gvim --remote" from a directory with non-word characters changes the current
 directory (Paulo Marcel Coelho Arabic, 2017 Oct 30, #2266)
 Also see #1689.
@@ -176,19 +184,38 @@ Also see #1689.
 ml_get error when using a Python. (Yggdroot, 2017 Jun 1, #1737)
 Lemonboy can reproduce (2017 Jun 5)
 
+Invalid range error when using BufWinLeave for closing terminal.
+(Gabriel Barta, 2017 Nov 15, #2339)
+
 ml_get errors with buggy script. (Dominique, 2017 Apr 30)
 
 Error in emsg with buggy script. (Dominique, 2017 Apr 30)
 
+Patch to avoid clearing the intro message on Win32 console.
+(Ken Takata, 2017 Nov 14)
+
+Patch to copy buffer-local options before buffer leaves the window. (Bjorn
+Linse, 2017 Nov 14, #2336)
+
 When a timer is running and typing CTRL-R on the command line, it is not
 redrawn properly. (xtal8, 2017 Oct 23, #2241)
 
 Universal solution to detect if t_RS is working, using cursor position.
 Koichi Iwamoto, #2126
 
+Patch to fix cmdline abbreviation after '<,'>. (Christian Brabandt, 2017 Nov
+13, on issue #2320)
+
+Patch to add TextDeletePost and TextYankPost events. (Philippe Vaucher, 2011
+May 24)  Update May 26.
+Now in patch by Lemonboy, #2333  (who is Lemonboy?)
+
 Default install on MS-Windows should source defaults.vim.
 Ask whether to use Windows or Vim key behavior?
 
+Patch for improving detecting Ruby on Mac in configure. (Ilya Mikhaltsou, 2017
+Nov 21)
+
 When using command line window, CmdlineLeave is triggered without
 CmdlineEnter.  (xtal8, 2017 Oct 30, #2263)
 Add some way to get the nested state.  Although CmdwinEnter is obviously
@@ -196,9 +223,14 @@ always nested.
 
 matchit hasn't been maintained for a long time.  #955.
 
+Problem with 'delcombine'. (agguser, 2017 Nov 10, #2313)
+
 MS-Windows: buffer completetion doesn't work when using backslash (or slash)
 for a path separator. (xtal8, #2201)
 
+Patch to adjust to DPI setting for GTK. (Roel van de Kraats, 2017 Nov 20,
+#2357)
+
 Test runtime files.
 Start with filetype detection: testdir/test_filetype.vim
 
@@ -217,15 +249,22 @@ Still happens (2017 Jul 9)
 When bracketed paste is used, pasting at the ":append" prompt does not get the
 line breaks. (Ken Takata, 2017 Aug 22)
 
+The ":move" command does not honor closed folds. (Ryan Lue, #2351)
+
 Patch for 24 bit color support in MS-Windows console, using vcon. (Nobuhiro
-Takasaki, 2017 Oct 1, #2060).  Ready to include now?
+Takasaki, Ken Takata, 2017 Oct 1, #2060).
 
 Memory leaks in test_channel? (or is it because of fork())
 Memory leak in test_arabic.
 Using uninitialized value in test_crypt.
 
+Patch to clear background when "guibg=NONE" is used and 'termguicolors' is
+set.
+
 Patch to make gM move to middle of line. (Yasuhiro Matsumoto, Sep 8, #2070)
 
+Cannot copy modeless selection when cursor is inside it. (lkintact, #2300)
+
 Include Haiku port. (Adrien Destugues, Siarzhuk Zharski, 2013 Oct 24)
 It can replace the BeOS code, which is likely not used anymore.
 Now on github: #1856.  Updated Oct 2017
@@ -290,8 +329,15 @@ Patch to add argument to :cquit. (Thinca, 2014 Oct 12)
 Python: After "import vim" error messages only show the first line of the
 stack trace. (Yggdroot, 2017 Jul 28, #1887)
 
+Profile of a dict function is lost when the dict is deleted.  Would it be
+possible to collect this?  (Daniel Hahler, #2350)
+
 Patch to add "module" to quickfix entries. (Marcin Szamotulski, Coot, 2017 Jun
-8, #1757)
+8, #1757)  Now part of #2322.  Or #2327?  #1757 was re-opened, include that
+first.
+
+Add `:filter` support for various commands (Marcin Szamotulski, 2017 Nov 12
+#2322)  Now in #2327?
 
 When checking if a bufref is valid, also check the buffer number, to catch the
 case of :bwipe followed by :new.
@@ -1484,9 +1530,6 @@ Build problem with small features on Mac OS X 10.6. (Rainer, 2011 Jan 24)
 
 "0g@$" puts '] on last byte of multi-byte. (ZyX, 2011 Jan 22)
 
-Patch to add TextDeletePost and TextYankPost events. (Philippe Vaucher, 2011
-May 24)  Update May 26.
-
 Patch for :tabrecently. (Hirokazu Yoshida, 2012 Jan 30)
 
 Problem with "syn sync grouphere". (Gustavo Niemeyer, 2011 Jan 27)
@@ -4653,7 +4696,7 @@ Command line history:
 -   Add "KeyWasTyped" flag: It's reset before each command and set when a
     character from the keyboard is consumed. Value is used to decide to put a
     command line in history or not. Put line in history if it didn't
-    completely resulted from one mapping.
+    completely result from one mapping.
 -   When using ":browse", also put the resulting edit command in the history,
     so that it can be repeated. (Demirel)
 

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 8.0.  Last change: 2017 Oct 15
+*usr_41.txt*	For Vim version 8.0.  Last change: 2017 Nov 19
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -886,6 +886,7 @@ GUI:						*gui-functions*
 	getwinposx()		X position of the GUI Vim window
 	getwinposy()		Y position of the GUI Vim window
 	balloon_show()		set the balloon content
+	balloon_split()		split a message for a balloon
 
 Vim server:					*server-functions*
 	serverlist()		return the list of server names

runtime/doc/various.txt

@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 8.0.  Last change: 2017 Sep 16
+*various.txt*   For Vim version 8.0.  Last change: 2017 Nov 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -310,9 +310,12 @@ g8			Print the hex values of the bytes used in the
 B  *+arabic*		|Arabic| language support
 N  *+autocmd*		|:autocmd|, automatic commands
 H  *+autoservername*	Automatically enable |clientserver|
-m  *+balloon_eval*	|balloon-eval| support. Included when compiling with
-			supported GUI (Motif, GTK, GUI) and either
-			Netbeans/Sun Workshop integration or |+eval| feature.
+m  *+balloon_eval*	|balloon-eval| support in the GUI. Included when
+			compiling with supported GUI (Motif, GTK, GUI) and
+			either Netbeans/Sun Workshop integration or |+eval|
+			feature.
+H  *+balloon_eval_term*	|balloon-eval| support in the terminal,
+			'balloonevalterm'
 N  *+browse*		|:browse| command
 N  *+builtin_terms*	some terminals builtin |builtin-terms|
 B  *++builtin_terms*	maximal terminals builtin |builtin-terms|

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Nov 11
+" Last Change:	2017 Nov 21
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -231,10 +231,10 @@ au BufNewFile,BufRead *.bl			setf blank
 au BufNewFile,BufRead */etc/blkid.tab,*/etc/blkid.tab.old   setf xml
 
 " Bazel (http://bazel.io)
-autocmd BufRead,BufNewFile *.bzl,WORKSPACE 	setf bzl
+autocmd BufRead,BufNewFile *.bzl,WORKSPACE,BUILD.bazel 	setf bzl
 if has("fname_case")
   " There is another check for BUILD further below.
-  autocmd BufRead,BufNewFile BUILD		setf bzl
+  autocmd BufRead,BufNewFile BUILD			setf bzl
 endif
 
 " C or lpc

runtime/optwin.vim

@@ -1,7 +1,7 @@
 " These commands create the option window.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Oct 19
+" Last Change:	2017 Nov 21
 
 " If there already is an option window, jump to that one.
 let buf = bufnr('option-window')
@@ -647,11 +647,17 @@ if has("gui")
   endif
   call append("$", "linespace\tnumber of pixel lines to use between characters")
   call append("$", " \tset lsp=" . &lsp)
-  if has("balloon_eval")
+  if has("balloon_eval") || has("balloon_eval_term")
     call append("$", "balloondelay\tdelay in milliseconds before a balloon may pop up")
     call append("$", " \tset bdlay=" . &bdlay)
-    call append("$", "ballooneval\twhether the balloon evaluation is to be used")
-    call <SID>BinOptionG("beval", &beval)
+    if has("balloon_eval")
+      call append("$", "ballooneval\tuse balloon evaluation in the GUI")
+      call <SID>BinOptionG("beval", &beval)
+    endif
+    if has("balloon_eval_term")
+      call append("$", "balloonevalterm\tuse balloon evaluation in the terminal")
+      call <SID>BinOptionG("bevalterm", &beval)
+    endif
     if has("eval")
       call append("$", "balloonexpr\texpression to show in balloon eval")
       call append("$", " \tset bexpr=" . &bexpr)

runtime/syntax/doxygen.vim

@@ -2,11 +2,10 @@
 " Language:     doxygen on top of c, cpp, idl, java, php
 " Maintainer:   Michael Geddes <vimmer@frog.wheelycreek.net>
 " Author:       Michael Geddes
-" Last Changes: Jan 2009 (\tparam by Domnique Pelle, Aug 2013)
-"               Nov 2017 (@throws by Domnique Pelle)
-" Version:      1.23
+" Last Change: November 2017 (\throws by Candy Gumdrop)
+" Version:      1.27
 "
-" Copyright 2004-2008 Michael Geddes
+" Copyright 2004-2017 Michael Geddes
 " Please feel free to use, modify & distribute all or part of this script,
 " providing this copyright message remains.
 " I would appreciate being acknowledged in any derived scripts, and would
@@ -59,52 +58,76 @@ try
   "
 
   " C/C++ Style line comments
-  syn region doxygenComment start=+/\*\(\*/\)\@![*!]+  end=+\*/+ contains=doxygenSyncStart,doxygenStart,doxygenTODO keepend fold containedin=phpRegion
-  syn region doxygenCommentL start=+//[/!]<\@!+me=e-1 end=+$+ contains=doxygenStartL,@Spell keepend skipwhite skipnl nextgroup=doxygenComment2 fold containedin=phpRegion
+  syn match doxygenCommentWhite +\s*\ze/\*\(\*/\)\@![*!]+ containedin=phpRegion
+  syn match doxygenCommentWhite +\s*\ze//[/!]+ containedin=phpRegion
+  syn match doxygenCommentWhite +\s*\ze/\*\(\*/\)\@![*!]+
+  syn match doxygenCommentWhite +\s*\ze//[/!]+ containedin=phpRegion
+
+  syn region doxygenComment start=+/\*\(\*/\)\@![*!]+  end=+\*/+ contains=doxygenSyncStart,doxygenStart,doxygenTODO,doxygenLeadingWhite  keepend fold containedin=phpRegion
+  syn region doxygenCommentL start=+//[/!]<\@!+me=e-1 end=+$+ contains=doxygenLeadingLWhite,doxygenStartL,@Spell keepend skipwhite skipnl nextgroup=doxygenCommentWhite2 fold containedin=phpRegion
   syn region doxygenCommentL start=+//[/!]<+me=e-2 end=+$+ contains=doxygenStartL,@Spell keepend skipwhite skipnl fold containedin=phpRegion
   syn region doxygenCommentL start=+//@\ze[{}]+ end=+$+ contains=doxygenGroupDefine,doxygenGroupDefineSpecial,@Spell fold containedin=phpRegion
+  syn region doxygenComment start=+/\*@\ze[{}]+ end=+\*/+ contains=doxygenGroupDefine,doxygenGroupDefineSpecial,@Spell fold containedin=phpRegion
 
   " Single line brief followed by multiline comment.
+  syn match doxygenCommentWhite2 +\_s*\ze/\*\(\*/\)\@![*!]+ contained nextgroup=doxygenComment2
   syn region doxygenComment2 start=+/\*\(\*/\)\@![*!]+ end=+\*/+ contained contains=doxygenSyncStart2,doxygenStart2,doxygenTODO keepend fold
   " This helps with sync-ing as for some reason, syncing behaves differently to a normal region, and the start pattern does not get matched.
   syn match doxygenSyncStart2 +[^*/]+ contained nextgroup=doxygenBody,doxygenPrev,doxygenStartSpecial,doxygenSkipComment,doxygenStartSkip2 skipwhite skipnl
 
   " Skip empty lines at the start for when comments start on the 2nd/3rd line.
-  syn match doxygenStartSkip2 +^\s*\*[^/]+me=e-1 contained nextgroup=doxygenBody,doxygenStartSpecial,doxygenStartSkip skipwhite skipnl
-  syn match doxygenStartSkip2 +^\s*\*$+ contained nextgroup=doxygenBody,doxygenStartSpecial,,doxygenStartSkip skipwhite skipnl
+  syn match doxygenStartSkip2 +^\s*\*[^/]+me=e-1 contained nextgroup=doxygenBody,doxygenStartSpecial,doxygenStartSkipWhite skipwhite skipnl
+  syn match doxygenStartSkip2 +^\s*\*$+ contained nextgroup=doxygenBody,doxygenStartSpecial,doxygenStartSkipWhite skipwhite skipnl
   syn match doxygenStart2 +/\*[*!]+ contained nextgroup=doxygenBody,doxygenPrev,doxygenStartSpecial,doxygenStartSkip2 skipwhite skipnl
 
 
   " Match the Starting pattern (effectively creating the start of a BNF)
   if !exists('g:doxygen_javadoc_autobrief') || g:doxygen_javadoc_autobrief
-    syn match doxygenStart +/\*[*!]+ contained nextgroup=doxygenBrief,doxygenPrev,doxygenFindBriefSpecial,doxygenStartSpecial,doxygenStartSkip,doxygenPage skipwhite skipnl
-    syn match doxygenStartL +//[/!]+ contained nextgroup=doxygenPrevL,doxygenBriefL,doxygenSpecial skipwhite
+    syn match doxygenStart +/\*[*!]+ contained nextgroup=doxygenBrief,doxygenPrev,doxygenFindBriefSpecial,doxygenStartSpecial,doxygenStartSkipWhite,doxygenPage skipwhite skipnl
+    syn match doxygenLeadingLWhite +\s\++ contained nextgroup=doxygenPrevL,doxygenBriefL,doxygenSpecial
+    syn match doxygenStartL +//[/!]+ contained nextgroup=doxygenLeaingLWhite,doxygenPrevL,doxygenBriefL,doxygenSpecial
     " Match the first sentence as a brief comment
     if ! exists('g:doxygen_end_punctuation')
       let g:doxygen_end_punctuation='[.]'
     endif
 
-    exe 'syn region doxygenBrief contained start=+[\\@]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\|[^ \t\\@*]+ start=+\(^\s*\)\@<!\*/\@!+ start=+\<\k+ skip=+'.doxygen_end_punctuation.'\S\@=+ end=+'.doxygen_end_punctuation.'+ end=+\(\s*\(\n\s*\*\=\s*\)[@\\]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\@!\)\@=+ contains=doxygenSmallSpecial,doxygenContinueComment,doxygenBriefEndComment,doxygenFindBriefSpecial,doxygenSmallSpecial,@doxygenHtmlGroup,doxygenTODO,doxygenHyperLink,doxygenHashLink,@Spell  skipnl nextgroup=doxygenBody'
+    exe 'syn region doxygenBrief contained start=+[\\@]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\|[^ \t\\@*]+ start=+\(^\s*\)\@<!\*/\@!+ start=+\<\k+ skip=+'.doxygen_end_punctuation.'\S\@=+ end=+'.doxygen_end_punctuation.'+ end=+\(\s*\(\n\s*\*\=\s*\)[@\\]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\@!\)\@=+ contains=doxygenSmallSpecial,doxygenContinueCommentWhite,doxygenLeadingWhite,doxygenBriefEndComment,doxygenFindBriefSpecial,doxygenSmallSpecial,@doxygenHtmlGroup,doxygenTODO,doxygenHyperLink,doxygenHashLink,@Spell  skipnl nextgroup=doxygenBody'
 
     syn match doxygenBriefEndComment +\*/+ contained
 
     exe 'syn region doxygenBriefL start=+@\k\@!\|[\\@]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\|[^ \t\\@]+ start=+\<+ skip=+'.doxygen_end_punctuation.'\S+ end=+'.doxygen_end_punctuation.'\|$+ contained contains=doxygenSmallSpecial,doxygenHyperLink,doxygenHashLink,@doxygenHtmlGroup,@Spell keepend'
     syn match doxygenPrevL +<+ contained  nextgroup=doxygenBriefL,doxygenSpecial skipwhite
   else
-    syn match doxygenStart +/\*[*!]+ contained nextgroup=doxygenBody,doxygenPrev,doxygenFindBriefSpecial,doxygenStartSpecial,doxygenStartSkip,doxygenPage skipwhite skipnl
-    syn match doxygenStartL +//[/!]+ contained nextgroup=doxygenPrevL,doxygenLine,doxygenSpecial skipwhite
+    syn match doxygenStart +/\*[*!]+ contained nextgroup=doxygenBody,doxygenPrev,doxygenFindBriefSpecial,doxygenStartSpecial,doxygenStartSkipWhite,doxygenPage skipwhite skipnl
+    syn match doxygenStartL +//[/!]+ contained nextgroup=doxygenLeadingLWhite,doxygenPrevL,doxygenLine,doxygenSpecial
+    syn match doxygenLeadingLWhite +\s\++ contained nextgroup=doxygenPrevL,doxygenLine,doxygenSpecial
     syn region doxygenLine start=+@\k\@!\|[\\@]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\|[^ \t\\@<]+ start=+\<+ end='$' contained contains=doxygenSmallSpecial,doxygenHyperLink,doxygenHashLink,@doxygenHtmlGroup,@Spell keepend
     syn match doxygenPrevL +<+ contained  nextgroup=doxygenLine,doxygenSpecial skipwhite
 
   endif
 
   " This helps with sync-ing as for some reason, syncing behaves differently to a normal region, and the start pattern does not get matched.
-  syn match doxygenSyncStart +\ze[^*/]+ contained nextgroup=doxygenBrief,doxygenPrev,doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkip,doxygenPage skipwhite skipnl
+  syn match doxygenSyncStart +\ze[^*/]+ contained nextgroup=doxygenBrief,doxygenPrev,doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkipWhite,doxygenPage skipwhite skipnl
+  " Match an [@\]brief so that it moves to body-mode.
+  "
+  "
+  " syn match doxygenBriefLine  contained
+  syn match doxygenBriefSpecial contained +[@\\]+ nextgroup=doxygenBriefWord skipwhite
+  " syn region doxygenFindBriefSpecial start=+[@\\]brief\>+ end=+\(\n\s*\*\=\s*\([@\\]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\@!\)\|\s*$\)\@=+ keepend contains=doxygenBriefSpecial nextgroup=doxygenBody keepend skipwhite skipnl contained
+  syn region doxygenFindBriefSpecial start=+[@\\]brief\>+ skip=+^\s*\(\*/\@!\s*\)\=\(\<\|[@\\]\<\([npcbea]\>\|em\>\|ref\|link\>\>\|f\$\|[$\\&<>#]\)\|[^ \t\\@*]\)+ end=+^+ keepend contains=doxygenBriefSpecial nextgroup=doxygenBody keepend skipwhite skipnl contained
+
+
+
+" end=+\(\n\s*\*\=\s*\([@\\]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\@!\)\|\s*$\)\@=+
+"syn region doxygenBriefLine contained start=+\<\k+ skip=+^\s*\(\*/\@!\s*\)\=\(\<\|[@\\]\<\([npcbea]\>\|em\>\|ref\|link\>\>\|f\$\|[$\\&<>#]\)\|[^ \t\\@*]\)+ end=+^+ contains=doxygenContinueCommentWhite,doxygenSmallSpecial,@doxygenHtmlGroup,doxygenTODO,doxygenHyperLink,doxygenHashLink,@Spell  skipwhite keepend matchgroup=xxx
+syn region doxygenBriefLine contained start=+\<\k+ skip=+^\s*\(\*/\@!\s*\)\=\(\<\|[@\\]\<\([npcbea]\>\|em\>\|ref\|link\>\>\|f\$\|[$\\&<>#]\)\|[^ \t\\@*]\)+ end=+^+  skipwhite keepend matchgroup=xxx
+" syn region doxygenBriefLine matchgroup=xxxy contained start=+\<\k.\++ skip=+^\s*\k+ end=+end+  skipwhite keepend
+"doxygenFindBriefSpecial,
+  "" syn region doxygenSpecialMultilineDesc  start=+.\++ contained contains=doxygenSpecialContinueCommentWhite,doxygenSmallSpecial,doxygenHyperLink,doxygenHashLink,@doxygenHtmlGroup,@Spell  skipwhite keepend
 
-  syn region doxygenBriefLine contained start=+\<\k+ end=+\(\n\s*\*\=\s*\([@\\]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\@!\)\|\s*$\)\@=+ contains=doxygenContinueComment,doxygenFindBriefSpecial,doxygenSmallSpecial,@doxygenHtmlGroup,doxygenTODO,doxygenHyperLink,doxygenHashLink,@Spell  skipwhite keepend
 
   " Match a '<' for applying a comment to the previous element.
-  syn match doxygenPrev +<+ contained nextgroup=doxygenBrief,doxygenBody,doxygenSpecial,doxygenStartSkip skipwhite
+  syn match doxygenPrev +<+ contained nextgroup=doxygenBrief,doxygenBody,doxygenSpecial,doxygenStartSkipWhite skipwhite
 
 if exists("c_comment_strings")
   " These are anti-Doxygen comments.  If there are more than two asterisks or 3 '/'s
@@ -123,10 +146,11 @@ endif
   "syn region doxygenBodyBit contained start=+$+
 
   " The main body of a doxygen comment.
-  syn region doxygenBody contained start=+\(/\*[*!]\)\@<!<\|[^<]\|$+ matchgroup=doxygenEndComment end=+\*/+re=e-2,me=e-2 contains=doxygenContinueComment,doxygenTODO,doxygenSpecial,doxygenSmallSpecial,doxygenHyperLink,doxygenHashLink,@doxygenHtmlGroup,@Spell
+  syn region doxygenBody contained start=+\(/\*[*!]\)\@<!<\|[^<]\|$+ matchgroup=doxygenEndComment end=+\*/+re=e-2,me=e-2 contains=doxygenContinueCommentWhite,doxygenTODO,doxygenSpecial,doxygenSmallSpecial,doxygenHyperLink,doxygenHashLink,@doxygenHtmlGroup,@Spell
 
   " These allow the skipping of comment continuation '*' characters.
-  syn match doxygenContinueComment contained +^\s*\*/\@!\s*+
+  syn match doxygenContinueCommentWhite contained +^\s*\ze\*+ nextgroup=doxygenContinueComment
+  syn match doxygenContinueComment contained +\*/\@!+
 
   " Catch a Brief comment without punctuation - flag it as an error but
   " make sure the end comment is picked up also.
@@ -135,27 +159,19 @@ endif
 
   " Skip empty lines at the start for when comments start on the 2nd/3rd line.
   if !exists('g:doxygen_javadoc_autobrief') || g:doxygen_javadoc_autobrief
-    syn match doxygenStartSkip +^\s*\*[^/]+me=e-1 contained nextgroup=doxygenBrief,doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkip,doxygenPage skipwhite skipnl
-    syn match doxygenStartSkip +^\s*\*$+ contained nextgroup=doxygenBrief,doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkip,doxygenPage skipwhite skipnl
+    syn match doxygenStartSkipWhite +^\s*\ze\*/\@!+ contained nextgroup=doxygenBrief,doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkipWhite,doxygenPage skipwhite skipnl
+    "syn match doxygenStartSkipWhite +^\s*\ze\*$+ contained nextgroup=doxygenBrief,doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkipWhite,doxygenPage skipwhite skipnl
   else
-    syn match doxygenStartSkip +^\s*\*[^/]+me=e-1 contained nextgroup=doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkip,doxygenPage,doxygenBody skipwhite skipnl
-    syn match doxygenStartSkip +^\s*\*$+ contained nextgroup=doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkip,doxygenPage,doxygenBody skipwhite skipnl
+    syn match doxygenStartSkipWhite +^\s*\*[^/]+me=e-1 contained nextgroup=doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkipWhite,doxygenPage,doxygenBody skipwhite skipnl
+    syn match doxygenStartSkipWhite +^\s*\*$+ contained nextgroup=doxygenStartSpecial,doxygenFindBriefSpecial,doxygenStartSkipWhite,doxygenPage,doxygenBody skipwhite skipnl
   endif
 
-  " Match an [@\]brief so that it moves to body-mode.
-  "
-  "
-  " syn match doxygenBriefLine  contained
-  syn match doxygenBriefSpecial contained +[@\\]+ nextgroup=doxygenBriefWord skipwhite
-  syn region doxygenFindBriefSpecial start=+[@\\]brief\>+ end=+\(\n\s*\*\=\s*\([@\\]\([npcbea]\>\|em\>\|ref\>\|link\>\|f\$\|[$\\&<>#]\)\@!\)\|\s*$\)\@=+ keepend contains=doxygenBriefSpecial nextgroup=doxygenBody keepend skipwhite skipnl contained
-
-
   " Create the single word matching special identifiers.
 
   fun! s:DxyCreateSmallSpecial( kword, name )
 
     let mx='[-:0-9A-Za-z_%=&+*/!~>|]\@<!\([-0-9A-Za-z_%=+*/!~>|#]\+[-0-9A-Za-z_%=+*/!~>|]\@!\|\\[\\<>&.]@\|[.,][0-9a-zA-Z_]\@=\|::\|([^)]*)\|&[0-9a-zA-Z]\{2,7};\)\+'
-    exe 'syn region doxygenSpecial'.a:name.'Word contained start=+'.a:kword.'+ end=+\(\_s\+'.mx.'\)\@<=[-a-zA-Z_0-9+*/^%|~!=&\\]\@!+ skipwhite contains=doxygenContinueComment,doxygen'.a:name.'Word'
+    exe 'syn region doxygenSpecial'.a:name.'Word contained start=+'.a:kword.'+ end=+\(\_s\+'.mx.'\)\@<=[-a-zA-Z_0-9+*/^%|~!=&\\]\@!+ skipwhite contains=doxygenContinueCommentWhite,doxygen'.a:name.'Word'
     exe 'syn match doxygen'.a:name.'Word contained "\_s\@<='.mx.'" contains=doxygenHtmlSpecial,@Spell keepend'
   endfun
   call s:DxyCreateSmallSpecial('p', 'Code')
@@ -180,40 +196,42 @@ endif
 
   " Match parameters and retvals (highlighting the first word as special).
   syn match doxygenParamDirection contained "\v\[(\s*in>((]\s*\[|\s*,\s*)out>)=|out>((]\s*\[|\s*,\s*)in>)=)\]" nextgroup=doxygenParamName skipwhite
-  syn keyword doxygenParam contained param tparam nextgroup=doxygenParamName,doxygenParamDirection skipwhite
+  syn keyword doxygenParam contained param nextgroup=doxygenParamName,doxygenParamDirection skipwhite
+  syn keyword doxygenTParam contained tparam nextgroup=doxygenParamName skipwhite
   syn match doxygenParamName contained +[A-Za-z0-9_:]\++ nextgroup=doxygenSpecialMultilineDesc skipwhite
   syn keyword doxygenRetval contained retval throw throws exception nextgroup=doxygenParamName skipwhite
 
   " Match one line identifiers.
   syn keyword doxygenOther contained addindex anchor
   \ dontinclude endhtmlonly endlatexonly showinitializer hideinitializer
-  \ example htmlonly image include ingroup internal latexonly line
-  \ overload related relates relatedalso relatesalso sa skip skipline
+  \ example htmlonly image include includelineno ingroup internal latexonly line
+  \ overload relates relatesalso sa skip skipline
   \ until verbinclude version addtogroup htmlinclude copydoc dotfile
   \ xmlonly endxmlonly
-  \ nextgroup=doxygenSpecialOnelineDesc
+  \ nextgroup=doxygenSpecialOnelineDesc copybrief copydetails copyright dir extends
+  \ implements
 
-  syn region doxygenCodeRegion contained matchgroup=doxygenOther start=+\<code\>+ matchgroup=doxygenOther end=+[\\@]\@<=\<endcode\>+ contains=doxygenCodeRegionSpecial,doxygenContinueComment,doxygenErrorComment,@NoSpell
+  syn region doxygenCodeRegion contained matchgroup=doxygenOther start=+\<code\>+ matchgroup=doxygenOther end=+[\\@]\@<=\<endcode\>+ contains=doxygenCodeRegionSpecial,doxygenContinueCommentWhite,doxygenErrorComment,@NoSpell
   syn match doxygenCodeRegionSpecial contained +[\\@]\(endcode\>\)\@=+
 
-  syn region doxygenVerbatimRegion contained matchgroup=doxygenOther start=+\<verbatim\>+ matchgroup=doxygenOther end=+[\\@]\@<=\<endverbatim\>+ contains=doxygenVerbatimRegionSpecial,doxygenContinueComment,doxygenErrorComment,@NoSpell
+  syn region doxygenVerbatimRegion contained matchgroup=doxygenOther start=+\<verbatim\>+ matchgroup=doxygenOther end=+[\\@]\@<=\<endverbatim\>+ contains=doxygenVerbatimRegionSpecial,doxygenContinueCommentWhite,doxygenErrorComment,@NoSpell
   syn match doxygenVerbatimRegionSpecial contained +[\\@]\(endverbatim\>\)\@=+
 
-  if exists('b:current_syntax') 
+  if exists('b:current_syntax')
     let b:doxygen_syntax_save=b:current_syntax
     unlet b:current_syntax
   endif
 
   syn include @Dotx syntax/dot.vim
 
-  if exists('b:doxygen_syntax_save') 
+  if exists('b:doxygen_syntax_save')
     let b:current_syntax=b:doxygen_syntax_save
     unlet b:doxygen_syntax_save
   else
     unlet b:current_syntax
   endif
 
-  syn region doxygenDotRegion contained matchgroup=doxygenOther start=+\<dot\>+ matchgroup=doxygenOther end=+[\\@]\@<=\<enddot\>+ contains=doxygenDotRegionSpecial,doxygenErrorComment,doxygenContinueComment,@NoSpell,@Dotx
+  syn region doxygenDotRegion contained matchgroup=doxygenOther start=+\<dot\>+ matchgroup=doxygenOther end=+[\\@]\@<=\<enddot\>+ contains=doxygenDotRegionSpecial,doxygenErrorComment,doxygenContinueCommentWhite,@NoSpell,@Dotx
   syn match doxygenDotRegionSpecial contained +[\\@]\(enddot\>\)\@=+
 
   " Match single line identifiers.
@@ -224,13 +242,13 @@ endif
   syn keyword doxygenOther contained par nextgroup=doxygenHeaderLine
   syn region doxygenHeaderLine start=+.+ end=+^+ contained skipwhite nextgroup=doxygenSpecialMultilineDesc
 
-  syn keyword doxygenOther contained arg author authors date deprecated li result return returns see invariant note post pre remark remarks since test nextgroup=doxygenSpecialMultilineDesc
+  syn keyword doxygenOther contained arg author authors date deprecated li return returns see invariant note post pre remarks since test nextgroup=doxygenSpecialMultilineDesc
   syn keyword doxygenOtherTODO contained todo attention nextgroup=doxygenSpecialMultilineDesc
   syn keyword doxygenOtherWARN contained warning nextgroup=doxygenSpecialMultilineDesc
   syn keyword doxygenOtherBUG contained bug nextgroup=doxygenSpecialMultilineDesc
 
   " Handle \link, \endlink, highlighting the link-to and the link text bits separately.
-  syn region doxygenOtherLink matchgroup=doxygenOther start=+\<link\>+ end=+[\@]\@<=endlink\>+ contained contains=doxygenLinkWord,doxygenContinueComment,doxygenLinkError,doxygenEndlinkSpecial
+  syn region doxygenOtherLink matchgroup=doxygenOther start=+\<link\>+ end=+[\@]\@<=endlink\>+ contained contains=doxygenLinkWord,doxygenContinueCommentWhite,doxygenLinkError,doxygenEndlinkSpecial
   syn match doxygenEndlinkSpecial contained +[\\@]\zeendlink\>+
 
   syn match doxygenLinkWord "[_a-zA-Z:#()][_a-z0-9A-Z:#()]*\>" contained skipnl nextgroup=doxygenLinkRest,doxygenContinueLinkComment
@@ -250,7 +268,7 @@ endif
 
   " Handle section
   syn keyword doxygenOther defgroup section subsection subsubsection weakgroup contained skipwhite nextgroup=doxygenSpecialIdent
-  syn region doxygenSpecialSectionDesc  start=+.\++ end=+$+ contained skipwhite contains=doxygenSmallSpecial,@doxygenHtmlGroup keepend skipwhite skipnl nextgroup=doxygenContinueComment
+  syn region doxygenSpecialSectionDesc  start=+.\++ end=+$+ contained skipwhite contains=doxygenSmallSpecial,@doxygenHtmlGroup keepend skipwhite skipnl nextgroup=doxygenContinueCommentWhite
   syn match doxygenSpecialIdent "\<[a-zA-Z_0-9]\+\>" contained nextgroup=doxygenSpecialSectionDesc
 
   " Does the one-line description for the one-line type identifiers.
@@ -260,8 +278,12 @@ endif
   " Handle the multiline description for the multiline type identifiers.
   " Continue until an 'empty' line (can contain a '*' continuation) or until the
   " next whole-line @ command \ command.
-  syn region doxygenSpecialMultilineDesc  start=+.\++ skip=+^\s*\(\*/\@!\s*\)\=\(\<\|[@\\]\<\([npcbea]\>\|em\>\|ref\|link\>\>\|f\$\|[$\\&<>#]\)\|[^ \t\\@*]\)+ end=+^+ contained contains=doxygenSpecialContinueComment,doxygenSmallSpecial,doxygenHyperLink,doxygenHashLink,@doxygenHtmlGroup,@Spell  skipwhite keepend
-  syn match doxygenSpecialContinueComment contained +^\s*\*/\@!\s*+ nextgroup=doxygenSpecial skipwhite
+  syn region doxygenSpecialMultilineDesc  start=+.\++ skip=+^\s*\(\*/\@!\s*\)\=\(\<\|[@\\]\<\([npcbea]\>\|em\>\|ref\|link\>\>\|f\$\|[$\\&<>#]\)\|[^ \t\\@*]\)+ end=+^+ contained contains=doxygenSpecialContinueCommentWhite,doxygenSmallSpecial,doxygenHyperLink,doxygenHashLink,@doxygenHtmlGroup,@Spell  skipwhite keepend
+
+"  syn match doxygenSpecialContinueComment contained +^\s*\*/\@!\s*+ nextgroup=doxygenSpecial skipwhite
+  syn match doxygenSpecialContinueCommentWhite contained +^\s*\ze\*+ nextgroup=doxygenSpecialContinueComment
+  syn match doxygenSpecialContinueComment contained +\*/\@!+
+
 
   " Handle special cases  'bold' and 'group'
   syn keyword doxygenBold contained bold nextgroup=doxygenSpecialHeading
@@ -288,7 +310,7 @@ endif
 
   " Supported HTML subset.  Not perfect, but okay.
   syn case ignore
-  syn region doxygenHtmlTag contained matchgroup=doxygenHtmlCh start=+\v\</=\ze([biuap]|em|strong|img|br|center|code|dfn|d[ldt]|hr|h[0-3]|li|[ou]l|pre|small|sub|sup|table|tt|var|caption|src|alt|longdesc|name|height|width|usemap|ismap|href|type)>+ skip=+\\<\|\<\k\+=\("[^"]*"\|'[^']*\)+ end=+>+ contains=doxygenHtmlCmd,doxygenContinueComment,doxygenHtmlVar
+  syn region doxygenHtmlTag contained matchgroup=doxygenHtmlCh start=+\v\</=\ze([biuap]|em|strong|img|br|center|code|dfn|d[ldt]|hr|h[0-3]|li|[ou]l|pre|small|sub|sup|table|tt|var|caption|src|alt|longdesc|name|height|width|usemap|ismap|href|type)>+ skip=+\\<\|\<\k\+=\("[^"]*"\|'[^']*\)+ end=+>+ contains=doxygenHtmlCmd,doxygenContinueCommentWhite,doxygenHtmlVar
   syn keyword doxygenHtmlCmd contained b i em strong u img a br p center code dfn dl dd dt hr h1 h2 h3 li ol ul pre small sub sup table tt var caption nextgroup=doxygenHtmlVar skipwhite
   syn keyword doxygenHtmlVar contained src alt longdesc name height width usemap ismap href type nextgroup=doxygenHtmlEqu skipwhite
   syn match doxygenHtmlEqu contained +=+ nextgroup=doxygenHtmlExpr skipwhite
@@ -298,7 +320,7 @@ endif
 
   syn cluster doxygenHtmlGroup contains=doxygenHtmlCode,doxygenHtmlBold,doxygenHtmlUnderline,doxygenHtmlItalic,doxygenHtmlSpecial,doxygenHtmlTag,doxygenHtmlLink
 
-  syn cluster doxygenHtmlTop contains=@Spell,doxygenHtmlSpecial,doxygenHtmlTag,doxygenContinueComment
+  syn cluster doxygenHtmlTop contains=@Spell,doxygenHtmlSpecial,doxygenHtmlTag,doxygenContinueCommentWhite
   " Html Support
   syn region doxygenHtmlLink contained start=+<[aA]\>\s*\(\n\s*\*\s*\)\=\(\(name\|href\)=\("[^"]*"\|'[^']*'\)\)\=\s*>+ end=+</[aA]>+me=e-4 contains=@doxygenHtmlTop
   hi link doxygenHtmlLink Underlined
@@ -343,7 +365,7 @@ endif
   syn cluster rcGroup add=doxygen.*
 
   let s:my_syncolor=0
-  if !exists(':SynColor') 
+  if !exists(':SynColor')
     command -nargs=+ SynColor hi def <args>
     let s:my_syncolor=1
   endif
@@ -469,6 +491,8 @@ endif
 
     call s:Doxygen_Hilights()
 
+    syn match doxygenLeadingWhite +\(^\s*\*\)\@<=\s*+ contained
+
     " This is still a proposal, but won't do any harm.
     aug doxygengroup
     au!
@@ -483,6 +507,7 @@ endif
     SynLink doxygenOtherTODO              Todo
     SynLink doxygenOtherWARN              Todo
     SynLink doxygenOtherBUG               Todo
+    SynLink doxygenLeadingLWhite          doxygenBody
 
     SynLink doxygenErrorSpecial           Error
     SynLink doxygenErrorEnd               Error
@@ -517,7 +542,10 @@ endif
     SynLink doxygenBriefL                 doxygenBrief
     SynLink doxygenBriefLine              doxygenBrief
     SynLink doxygenHeaderLine             doxygenSpecialHeading
-    SynLink doxygenStartSkip              doxygenContinueComment
+    SynLink doxygenCommentWhite           Normal
+    SynLink doxygenCommentWhite2          doxygenCommentWhite
+    SynLink doxygenContinueCommentWhite   doxygenCommentWhite
+    SynLink doxygenStartSkipWhite         doxygenContinueCommentWhite
     SynLink doxygenLinkWord               doxygenParamName
     SynLink doxygenLinkRest               doxygenSpecialMultilineDesc
     SynLink doxygenHyperLink              doxygenLinkWord
@@ -591,5 +619,5 @@ finally
   let &cpo = s:cpo_save
   unlet s:cpo_save
 endtry
-
+let suppress_doxygen=1
 " vim:et sw=2 sts=2

src/Makefile

@@ -2190,6 +2190,7 @@ test_arglist \
 	test_highlight \
 	test_history \
 	test_hlsearch \
+	test_iminsert \
 	test_increment \
 	test_increment_dbcs \
 	test_ins_complete \

src/beval.h

@@ -78,7 +78,6 @@ typedef struct BalloonEvalStruct
 #define EVAL_OFFSET_X 15 /* displacement of beval topleft corner from pointer */
 #define EVAL_OFFSET_Y 10
 
-#include "beval.pro"
 #ifdef FEAT_BEVAL_GUI
 # include "gui_beval.pro"
 #endif

src/edit.c

@@ -516,7 +516,7 @@ edit(
      */
     if (curbuf->b_p_iminsert == B_IMODE_LMAP)
 	State |= LANGMAP;
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
     im_set_active(curbuf->b_p_iminsert == B_IMODE_IM);
 #endif
 
@@ -8372,7 +8372,7 @@ ins_reg(void)
     ++no_u_sync;
     if (regname == '=')
     {
-# ifdef USE_IM_CONTROL
+# ifdef FEAT_MBYTE
 	int	im_on = im_get_status();
 # endif
 	/* Sync undo when evaluating the expression calls setline() or
@@ -8380,7 +8380,7 @@ ins_reg(void)
 	u_sync_once = 2;
 
 	regname = get_expr_register();
-# ifdef USE_IM_CONTROL
+# ifdef FEAT_MBYTE
 	/* Restore the Input Method. */
 	if (im_on)
 	    im_set_active(TRUE);
@@ -8509,12 +8509,12 @@ ins_ctrl_hat(void)
 	{
 	    curbuf->b_p_iminsert = B_IMODE_LMAP;
 	    State |= LANGMAP;
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 	    im_set_active(FALSE);
 #endif
 	}
     }
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
     else
     {
 	/* There are no ":lmap" mappings, toggle IM */
@@ -8661,7 +8661,7 @@ ins_esc(
 	}
     }
 
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
     /* Disable IM to allow typing English directly for Normal mode commands.
      * When ":lmap" is enabled don't change 'iminsert' (IM can be enabled as
      * well). */

src/evalfunc.c

@@ -13449,8 +13449,10 @@ f_writefile(typval_T *argvars, typval_T *rettv)
 	if (write_list(fd, list, binary) == FAIL)
 	    ret = -1;
 #ifdef HAVE_FSYNC
-	else if (do_fsync && fsync(fileno(fd)) != 0)
-	    EMSG(_(e_fsync));
+	else if (do_fsync)
+	    /* Ignore the error, the user wouldn't know what to do about it.
+	     * May happen for a device. */
+	    ignored = fsync(fileno(fd));
 #endif
 	fclose(fd);
     }

src/ex_getln.c

@@ -359,11 +359,11 @@ getcmdline(
 	    b_im_ptr = &curbuf->b_p_imsearch;
 	if (*b_im_ptr == B_IMODE_LMAP)
 	    State |= LANGMAP;
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 	im_set_active(*b_im_ptr == B_IMODE_IM);
 #endif
     }
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
     else if (p_imcmdline)
 	im_set_active(TRUE);
 #endif
@@ -1119,7 +1119,7 @@ getcmdline(
 		{
 		    /* ":lmap" mappings exists, toggle use of mappings. */
 		    State ^= LANGMAP;
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 		    im_set_active(FALSE);	/* Disable input method */
 #endif
 		    if (b_im_ptr != NULL)
@@ -1130,7 +1130,7 @@ getcmdline(
 			    *b_im_ptr = B_IMODE_NONE;
 		    }
 		}
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 		else
 		{
 		    /* There are no ":lmap" mappings, toggle IM.  When
@@ -2143,7 +2143,7 @@ returncmd:
 #endif
 
     State = save_State;
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
     if (b_im_ptr != NULL && *b_im_ptr != B_IMODE_LMAP)
 	im_save_status(b_im_ptr);
     im_set_active(FALSE);

src/getchar.c

@@ -2890,7 +2890,7 @@ vgetorpeek(int advance)
 						     + typebuf.tb_len] != NUL)
 			typebuf.tb_noremap[typebuf.tb_off
 						 + typebuf.tb_len++] = RM_YES;
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 		    /* Get IM status right after getting keys, not after the
 		     * timeout for a mapping (focus may be lost by then). */
 		    vgetc_im_active = im_get_status();

src/globals.h

@@ -1022,7 +1022,7 @@ EXTERN int	stop_insert_mode;	/* for ":stopinsert" and 'insertmode' */
 
 EXTERN int	KeyTyped;		/* TRUE if user typed current char */
 EXTERN int	KeyStuffed;		/* TRUE if current char from stuffbuf */
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 EXTERN int	vgetc_im_active;	/* Input Method was active for last
 					   character obtained from vgetc() */
 #endif

src/gui.c

@@ -1078,7 +1078,7 @@ gui_update_cursor(
 	gui_undraw_cursor();
 	if (gui.row < 0)
 	    return;
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 	if (gui.row != gui.cursor_row || gui.col != gui.cursor_col)
 	    im_set_position(gui.row, gui.col);
 #endif
@@ -1136,7 +1136,7 @@ gui_update_cursor(
 	if (id > 0)
 	{
 	    cattr = syn_id2colors(id, &cfg, &cbg);
-#if defined(USE_IM_CONTROL) || defined(FEAT_HANGULIN)
+#if defined(FEAT_MBYTE) || defined(FEAT_HANGULIN)
 	    {
 		static int iid;
 		guicolor_T fg, bg;

src/gui_mac.c

@@ -2024,15 +2024,15 @@ gui_mac_handle_window_activate(
 	switch (eventKind)
 	{
 	    case kEventWindowActivated:
-#if defined(USE_IM_CONTROL)
+# if defined(FEAT_MBYTE)
 		im_on_window_switch(TRUE);
-#endif
+# endif
 		return noErr;
 
 	    case kEventWindowDeactivated:
-#if defined(USE_IM_CONTROL)
+# if defined(FEAT_MBYTE)
 		im_on_window_switch(FALSE);
-#endif
+# endif
 		return noErr;
 	}
     }
@@ -6230,7 +6230,7 @@ char_u *FullPathFromFSSpec_save(FSSpec file)
 #endif
 }
 
-#if (defined(USE_IM_CONTROL) || defined(PROTO)) && defined(USE_CARBONKEYHANDLER)
+#if (defined(FEAT_MBYTE) || defined(PROTO)) && defined(USE_CARBONKEYHANDLER)
 /*
  * Input Method Control functions.
  */
@@ -6317,7 +6317,7 @@ im_set_active(int active)
     ScriptLanguageRecord *slptr = NULL;
     OSStatus err;
 
-    if (! gui.in_use)
+    if (!gui.in_use)
 	return;
 
     if (im_initialized == 0)
@@ -6379,7 +6379,7 @@ im_get_status(void)
     return im_is_active;
 }
 
-#endif /* defined(USE_IM_CONTROL) || defined(PROTO) */
+#endif /* defined(FEAT_MBYTE) || defined(PROTO) */
 
 
 

src/gui_w32.c

@@ -485,12 +485,10 @@ static void TrackUserActivity(UINT uMsg);
  * These LOGFONT used for IME.
  */
 #ifdef FEAT_MBYTE
-# ifdef USE_IM_CONTROL
 /* holds LOGFONT for 'guifontwide' if available, otherwise 'guifont' */
 static LOGFONT norm_logfont;
 /* holds LOGFONT for 'guifont' always. */
 static LOGFONT sub_logfont;
-# endif
 #endif
 
 #ifdef FEAT_MBYTE_IME

src/mbyte.c

@@ -4782,6 +4782,40 @@ iconv_end(void)
 
 #endif /* FEAT_MBYTE */
 
+#ifdef FEAT_EVAL
+    static void
+call_imactivatefunc(int active)
+{
+    char_u *argv[1];
+
+    if (active)
+	argv[0] = (char_u *)"1";
+    else
+	argv[0] = (char_u *)"0";
+    (void)call_func_retnr(p_imaf, 1, argv, FALSE);
+}
+
+    static int
+call_imstatusfunc(void)
+{
+    int is_active;
+
+    /* FIXME: Don't execute user function in unsafe situation. */
+    if (exiting
+#   ifdef FEAT_AUTOCMD
+	    || is_autocmd_blocked()
+#   endif
+	    )
+	return FALSE;
+    /* FIXME: :py print 'xxx' is shown duplicate result.
+     * Use silent to avoid it. */
+    ++msg_silent;
+    is_active = call_func_retnr(p_imsf, 0, NULL, FALSE);
+    --msg_silent;
+    return (is_active > 0);
+}
+#endif
+
 #if defined(FEAT_XIM) || defined(PROTO)
 
 # if defined(FEAT_GUI_GTK) || defined(PROTO)
@@ -5654,6 +5688,11 @@ im_synthesize_keypress(unsigned int keyval, unsigned int state)
     void
 xim_reset(void)
 {
+#ifdef FEAT_EVAL
+    if (p_imaf[0] != NUL)
+	call_imactivatefunc(im_is_active);
+    else
+#endif
     if (xic != NULL)
     {
 	gtk_im_context_reset(xic);
@@ -5664,20 +5703,7 @@ xim_reset(void)
 	{
 	    xim_set_focus(gui.in_focus);
 
-#  ifdef FEAT_EVAL
-	    if (p_imaf[0] != NUL)
-	    {
-		char_u *argv[1];
-
-		if (im_is_active)
-		    argv[0] = (char_u *)"1";
-		else
-		    argv[0] = (char_u *)"0";
-		(void)call_func_retnr(p_imaf, 1, argv, FALSE);
-	    }
-	    else
-#  endif
-		if (im_activatekey_keyval != GDK_VoidSymbol)
+	    if (im_activatekey_keyval != GDK_VoidSymbol)
 	    {
 		if (im_is_active)
 		{
@@ -5843,23 +5869,7 @@ im_get_status(void)
 {
 #  ifdef FEAT_EVAL
     if (p_imsf[0] != NUL)
-    {
-	int is_active;
-
-	/* FIXME: Don't execute user function in unsafe situation. */
-	if (exiting
-#   ifdef FEAT_AUTOCMD
-		|| is_autocmd_blocked()
-#   endif
-		)
-	    return FALSE;
-	/* FIXME: :py print 'xxx' is shown duplicate result.
-	 * Use silent to avoid it. */
-	++msg_silent;
-	is_active = call_func_retnr(p_imsf, 0, NULL, FALSE);
-	--msg_silent;
-	return (is_active > 0);
-    }
+	return call_imstatusfunc();
 #  endif
     return im_is_active;
 }
@@ -5881,30 +5891,45 @@ im_is_preediting(void)
 static int	xim_is_active = FALSE;  /* XIM should be active in the current
 					   mode */
 static int	xim_has_focus = FALSE;	/* XIM is really being used for Vim */
-#ifdef FEAT_GUI_X11
+#  ifdef FEAT_GUI_X11
 static XIMStyle	input_style;
 static int	status_area_enabled = TRUE;
-#endif
+#  endif
 
 /*
  * Switch using XIM on/off.  This is used by the code that changes "State".
+ * When 'imactivatefunc' is defined use that function instead.
  */
     void
-im_set_active(int active)
+im_set_active(int active_arg)
 {
-    if (xic == NULL)
-	return;
+    int active = active_arg;
 
     /* If 'imdisable' is set, XIM is never active. */
     if (p_imdisable)
 	active = FALSE;
-#if !defined(FEAT_GUI_GTK)
+#  if !defined(FEAT_GUI_GTK)
     else if (input_style & XIMPreeditPosition)
 	/* There is a problem in switching XIM off when preediting is used,
 	 * and it is not clear how this can be solved.  For now, keep XIM on
 	 * all the time, like it was done in Vim 5.8. */
 	active = TRUE;
-#endif
+#  endif
+
+#  if defined(FEAT_EVAL)
+    if (p_imaf[0] != NUL)
+    {
+	if (active != im_get_status())
+	{
+	    call_imactivatefunc(active);
+	    im_is_active = active;
+	}
+	return;
+    }
+#  endif
+
+    if (xic == NULL)
+	return;
 
     /* Remember the active state, it is needed when Vim gets keyboard focus. */
     xim_is_active = active;
@@ -6006,19 +6031,19 @@ xim_set_preedit(void)
     }
 }
 
-#if defined(FEAT_GUI_X11)
+#  if defined(FEAT_GUI_X11)
 static char e_xim[] = N_("E285: Failed to create input context");
-#endif
+#  endif
 
-#if defined(FEAT_GUI_X11) || defined(PROTO)
-# if defined(XtSpecificationRelease) && XtSpecificationRelease >= 6 && !defined(SUN_SYSTEM)
-#  define USE_X11R6_XIM
-# endif
+#  if defined(FEAT_GUI_X11) || defined(PROTO)
+#   if defined(XtSpecificationRelease) && XtSpecificationRelease >= 6 && !defined(SUN_SYSTEM)
+#    define USE_X11R6_XIM
+#   endif
 
 static int xim_real_init(Window x11_window, Display *x11_display);
 
 
-#ifdef USE_X11R6_XIM
+#  ifdef USE_X11R6_XIM
 static void xim_destroy_cb(XIM im, XPointer client_data, XPointer call_data);
 
     static void
@@ -6030,9 +6055,9 @@ xim_instantiate_cb(
     Window	x11_window;
     Display	*x11_display;
 
-#ifdef XIM_DEBUG
+#   ifdef XIM_DEBUG
     xim_log("xim_instantiate_cb()\n");
-#endif
+#   endif
 
     gui_get_x11_windis(&x11_window, &x11_display);
     if (display != x11_display)
@@ -6054,9 +6079,9 @@ xim_destroy_cb(
     Window	x11_window;
     Display	*x11_display;
 
-#ifdef XIM_DEBUG
+#   ifdef XIM_DEBUG
     xim_log("xim_destroy_cb()\n");
-#endif
+   #endif
     gui_get_x11_windis(&x11_window, &x11_display);
 
     xic = NULL;
@@ -6067,7 +6092,7 @@ xim_destroy_cb(
     XRegisterIMInstantiateCallback(x11_display, NULL, NULL, NULL,
 				   xim_instantiate_cb, NULL);
 }
-#endif
+#  endif
 
     void
 xim_init(void)
@@ -6075,9 +6100,9 @@ xim_init(void)
     Window	x11_window;
     Display	*x11_display;
 
-#ifdef XIM_DEBUG
+#  ifdef XIM_DEBUG
     xim_log("xim_init()\n");
-#endif
+#  endif
 
     gui_get_x11_windis(&x11_window, &x11_display);
 
@@ -6088,10 +6113,10 @@ xim_init(void)
 
     gui_set_shellsize(FALSE, FALSE, RESIZE_BOTH);
 
-#ifdef USE_X11R6_XIM
+#  ifdef USE_X11R6_XIM
     XRegisterIMInstantiateCallback(x11_display, NULL, NULL, NULL,
 				   xim_instantiate_cb, NULL);
-#endif
+#  endif
 }
 
     static int
@@ -6103,7 +6128,7 @@ xim_real_init(Window x11_window, Display *x11_display)
 		*ns,
 		*end,
 		tmp[1024];
-#define IMLEN_MAX 40
+#  define IMLEN_MAX 40
     char	buf[IMLEN_MAX + 7];
     XIM		xim = NULL;
     XIMStyles	*xim_styles;
@@ -6168,7 +6193,7 @@ xim_real_init(Window x11_window, Display *x11_display)
 	return FALSE;
     }
 
-#ifdef USE_X11R6_XIM
+#  ifdef USE_X11R6_XIM
     {
 	XIMCallback destroy_cb;
 
@@ -6177,7 +6202,7 @@ xim_real_init(Window x11_window, Display *x11_display)
 	if (XSetIMValues(xim, XNDestroyCallback, &destroy_cb, NULL))
 	    EMSG(_("E287: Warning: Could not set destroy callback to IM"));
     }
-#endif
+#  endif
 
     if (XGetIMValues(xim, XNQueryInputStyle, &xim_styles, NULL) || !xim_styles)
     {
@@ -6253,7 +6278,7 @@ xim_real_init(Window x11_window, Display *x11_display)
 
     /* A crash was reported when trying to pass gui.norm_font as XNFontSet,
      * thus that has been removed.  Hopefully the default works... */
-#ifdef FEAT_XFONTSET
+#  ifdef FEAT_XFONTSET
     if (gui.fontset != NOFONTSET)
     {
 	preedit_list = XVaCreateNestedList(0,
@@ -6269,7 +6294,7 @@ xim_real_init(Window x11_window, Display *x11_display)
 				NULL);
     }
     else
-#endif
+#  endif
     {
 	preedit_list = XVaCreateNestedList(0,
 				XNSpotLocation, &over_spot,
@@ -6311,7 +6336,7 @@ xim_real_init(Window x11_window, Display *x11_display)
     return TRUE;
 }
 
-#endif /* FEAT_GUI_X11 */
+#  endif /* FEAT_GUI_X11 */
 
 /*
  * Get IM status.  When IM is on, return TRUE.  Else return FALSE.
@@ -6322,6 +6347,10 @@ xim_real_init(Window x11_window, Display *x11_display)
     int
 im_get_status(void)
 {
+#  ifdef FEAT_EVAL
+    if (p_imsf[0] != NUL)
+	return call_imstatusfunc();
+#  endif
     return xim_has_focus;
 }
 
@@ -6442,6 +6471,36 @@ xim_get_status_area_height(void)
 }
 # endif
 
+#else /* !defined(FEAT_XIM) */
+
+# ifndef FEAT_GUI_W32
+static int im_was_set_active = FALSE;
+
+    int
+im_get_status()
+{
+#  ifdef FEAT_EVAL
+    if (p_imsf[0] != NUL)
+	return call_imstatusfunc();
+#  endif
+    return im_was_set_active;
+}
+
+    void
+im_set_active(int active_arg)
+{
+#  if defined(FEAT_MBYTE) && defined(FEAT_EVAL)
+    int	    active = !p_imdisable && active_arg;
+
+    if (p_imaf[0] != NUL && active != im_get_status())
+    {
+	call_imactivatefunc(active);
+	im_was_set_active = active;
+    }
+#  endif
+}
+# endif
+
 #endif /* FEAT_XIM */
 
 #if defined(FEAT_MBYTE) || defined(PROTO)

src/normal.c

@@ -892,7 +892,7 @@ getcount:
 	int	lit = FALSE;	/* get extra character literally */
 	int	langmap_active = FALSE;    /* using :lmap mappings */
 	int	lang;		/* getting a text character */
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 	int	save_smd;	/* saved value of p_smd */
 #endif
 
@@ -957,7 +957,7 @@ getcount:
 		    State = LANGMAP;
 		langmap_active = TRUE;
 	    }
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 	    save_smd = p_smd;
 	    p_smd = FALSE;	/* Don't let the IM code show the mode here */
 	    if (lang && curbuf->b_p_iminsert == B_IMODE_IM)
@@ -973,7 +973,7 @@ getcount:
 		++allow_keys;
 		State = NORMAL_BUSY;
 	    }
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 	    if (lang)
 	    {
 		if (curbuf->b_p_iminsert != B_IMODE_LMAP)
@@ -4633,7 +4633,9 @@ nv_mousescroll(cmdarg_T *cap)
     {
 # ifdef FEAT_TERMINAL
 	if (term_use_loop())
-	    send_keys_to_term(curbuf->b_term, cap->cmdchar, TRUE);
+	    /* This window is a terminal window, send the mouse event there.
+	     * Set "typed" to FALSE to avoid an endless loop. */
+	    send_keys_to_term(curbuf->b_term, cap->cmdchar, FALSE);
 	else
 # endif
 	if (mod_mask & (MOD_MASK_SHIFT | MOD_MASK_CTRL))

src/option.c

@@ -1539,7 +1539,7 @@ static struct vimoption options[] =
 			    (char_u *)&p_ic, PV_NONE,
 			    {(char_u *)FALSE, (char_u *)0L} SCRIPTID_INIT},
     {"imactivatefunc","imaf",P_STRING|P_VI_DEF|P_SECURE,
-# if defined(FEAT_EVAL) && defined(FEAT_XIM) && defined(FEAT_GUI_GTK)
+#if defined(FEAT_EVAL) && defined(FEAT_MBYTE)
 			    (char_u *)&p_imaf, PV_NONE,
 			    {(char_u *)"", (char_u *)NULL}
 # else
@@ -1555,14 +1555,14 @@ static struct vimoption options[] =
 #endif
 			    {(char_u *)"", (char_u *)0L} SCRIPTID_INIT},
     {"imcmdline",   "imc",  P_BOOL|P_VI_DEF,
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 			    (char_u *)&p_imcmdline, PV_NONE,
 #else
 			    (char_u *)NULL, PV_NONE,
 #endif
 			    {(char_u *)FALSE, (char_u *)0L} SCRIPTID_INIT},
     {"imdisable",   "imd",  P_BOOL|P_VI_DEF,
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 			    (char_u *)&p_imdisable, PV_NONE,
 #else
 			    (char_u *)NULL, PV_NONE,
@@ -1582,7 +1582,7 @@ static struct vimoption options[] =
 			    {(char_u *)B_IMODE_USE_INSERT, (char_u *)0L}
 			    SCRIPTID_INIT},
     {"imstatusfunc","imsf",P_STRING|P_VI_DEF|P_SECURE,
-#if defined(FEAT_EVAL) && defined(FEAT_XIM) && defined(FEAT_GUI_GTK)
+#if defined(FEAT_EVAL) && defined(FEAT_MBYTE)
 			    (char_u *)&p_imsf, PV_NONE,
 			    {(char_u *)"", (char_u *)NULL}
 #else
@@ -8469,7 +8469,7 @@ set_bool_option(
     }
 #endif
 
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
     /* 'imdisable' */
     else if ((int *)varp == &p_imdisable)
     {

src/option.h

@@ -581,13 +581,15 @@ EXTERN char_u	*p_iconstring;	/* 'iconstring' */
 EXTERN int	p_ic;		/* 'ignorecase' */
 #if defined(FEAT_XIM) && defined(FEAT_GUI_GTK)
 EXTERN char_u	*p_imak;	/* 'imactivatekey' */
+#define IM_ON_THE_SPOT		0L
+#define IM_OVER_THE_SPOT	1L
+EXTERN long	p_imst;		/* 'imstyle' */
+#endif
+#if defined(FEAT_EVAL) && defined(FEAT_MBYTE)
 EXTERN char_u	*p_imaf;	/* 'imactivatefunc' */
 EXTERN char_u	*p_imsf;	/* 'imstatusfunc' */
-EXTERN long	p_imst;		/* 'imstyle' */
-# define IM_ON_THE_SPOT		0L
-# define IM_OVER_THE_SPOT	1L
 #endif
-#ifdef USE_IM_CONTROL
+#ifdef FEAT_MBYTE
 EXTERN int	p_imcmdline;	/* 'imcmdline' */
 EXTERN int	p_imdisable;	/* 'imdisable' */
 #endif

src/os_win32.c

@@ -5034,10 +5034,10 @@ job_io_file_open(
  * environment argument of vim_create_process().
  */
     void
-win32_build_env(dict_T *env, garray_T *gap)
+win32_build_env(dict_T *env, garray_T *gap, int is_terminal)
 {
     hashitem_T	*hi;
-    int		todo = (int)env->dv_hashtab.ht_used;
+    long_u	todo = env != NULL ? env->dv_hashtab.ht_used : 0;
     LPVOID	base = GetEnvironmentStringsW();
 
     /* for last \0 */
@@ -5062,35 +5062,56 @@ win32_build_env(dict_T *env, garray_T *gap)
 	*((WCHAR*)gap->ga_data + gap->ga_len++) = L'\0';
     }
 
-    for (hi = env->dv_hashtab.ht_array; todo > 0; ++hi)
+    if (env != NULL)
     {
-	if (!HASHITEM_EMPTY(hi))
+	for (hi = env->dv_hashtab.ht_array; todo > 0; ++hi)
 	{
-	    typval_T *item = &dict_lookup(hi)->di_tv;
-	    WCHAR   *wkey = enc_to_utf16((char_u *)hi->hi_key, NULL);
-	    WCHAR   *wval = enc_to_utf16(get_tv_string(item), NULL);
-	    --todo;
-	    if (wkey != NULL && wval != NULL)
+	    if (!HASHITEM_EMPTY(hi))
 	    {
-		size_t	n;
-		size_t	lkey = wcslen(wkey);
-		size_t	lval = wcslen(wval);
+		typval_T *item = &dict_lookup(hi)->di_tv;
+		WCHAR   *wkey = enc_to_utf16((char_u *)hi->hi_key, NULL);
+		WCHAR   *wval = enc_to_utf16(get_tv_string(item), NULL);
+		--todo;
+		if (wkey != NULL && wval != NULL)
+		{
+		    size_t	n;
+		    size_t	lkey = wcslen(wkey);
+		    size_t	lval = wcslen(wval);
 
-		if (ga_grow(gap, (int)(lkey + lval + 2)) != OK)
-		    continue;
-		for (n = 0; n < lkey; n++)
-		    *((WCHAR*)gap->ga_data + gap->ga_len++) = wkey[n];
-		*((WCHAR*)gap->ga_data + gap->ga_len++) = L'=';
-		for (n = 0; n < lval; n++)
-		    *((WCHAR*)gap->ga_data + gap->ga_len++) = wval[n];
-		*((WCHAR*)gap->ga_data + gap->ga_len++) = L'\0';
+		    if (ga_grow(gap, (int)(lkey + lval + 2)) != OK)
+			continue;
+		    for (n = 0; n < lkey; n++)
+			*((WCHAR*)gap->ga_data + gap->ga_len++) = wkey[n];
+		    *((WCHAR*)gap->ga_data + gap->ga_len++) = L'=';
+		    for (n = 0; n < lval; n++)
+			*((WCHAR*)gap->ga_data + gap->ga_len++) = wval[n];
+		    *((WCHAR*)gap->ga_data + gap->ga_len++) = L'\0';
+		}
+		if (wkey != NULL) vim_free(wkey);
+		if (wval != NULL) vim_free(wval);
 	    }
-	    if (wkey != NULL) vim_free(wkey);
-	    if (wval != NULL) vim_free(wval);
 	}
     }
 
-    *((WCHAR*)gap->ga_data + gap->ga_len++) = L'\0';
+# ifdef FEAT_CLIENTSERVER
+    if (is_terminal)
+    {
+	char_u	*servername = get_vim_var_str(VV_SEND_SERVER);
+	size_t	lval = STRLEN(servername);
+	size_t	n;
+
+	if (ga_grow(gap, (int)(14 + lval + 2)) == OK)
+	{
+	    for (n = 0; n < 15; n++)
+		*((WCHAR*)gap->ga_data + gap->ga_len++) =
+		    (WCHAR)"VIM_SERVERNAME="[n];
+	    for (n = 0; n < lval; n++)
+		*((WCHAR*)gap->ga_data + gap->ga_len++) =
+		    (WCHAR)servername[n];
+	    *((WCHAR*)gap->ga_data + gap->ga_len++) = L'\0';
+	}
+    }
+# endif
 }
 
     void
@@ -5133,7 +5154,7 @@ mch_job_start(char *cmd, job_T *job, jobopt_T *options)
     }
 
     if (options->jo_env != NULL)
-	win32_build_env(options->jo_env, &ga);
+	win32_build_env(options->jo_env, &ga, FALSE);
 
     ZeroMemory(&pi, sizeof(pi));
     ZeroMemory(&si, sizeof(si));

src/proto.h

@@ -201,7 +201,9 @@ void qsort(void *base, size_t elm_count, size_t elm_size, int (*cmp)(const void
 
 /* Ugly solution for "BalloonEval" not being defined while it's used in some
  * .pro files. */
-# ifndef FEAT_BEVAL
+# ifdef FEAT_BEVAL
+#  include "beval.pro"
+# else
 #  define BalloonEval int
 # endif
 

src/proto/os_win32.pro

@@ -67,5 +67,5 @@ void used_file_arg(char *name, int literal, int full_path, int diff_mode);
 void set_alist_count(void);
 void fix_arg_enc(void);
 int mch_setenv(char *var, char *value, int x);
-void win32_build_env(dict_T *l, garray_T *gap);
+void win32_build_env(dict_T *l, garray_T *gap, int is_terminal);
 /* vim: set ft=c : */

src/quickfix.c

@@ -2654,6 +2654,9 @@ qf_list(exarg_T *eap)
     int		idx2 = -1;
     char_u	*arg = eap->arg;
     int		plus = FALSE;
+    int		qfFileAttr;
+    int		qfSepAttr;
+    int		qfLineAttr;
     int		all = eap->forceit;	/* if not :cl!, only show
 						   recognised errors */
     qf_info_T	*qi = &ql_info;
@@ -2699,6 +2702,20 @@ qf_list(exarg_T *eap)
 	    idx2 = (-idx2 > i) ? 0 : idx2 + i + 1;
     }
 
+    /*
+     * Get the attributes for the different quickfix highlight items.  Note
+     * that this depends on syntax items defined in the qf.vim syntax file
+     */
+    qfFileAttr = syn_name2attr((char_u *)"qfFileName");
+    if (qfFileAttr == 0)
+	qfFileAttr = HL_ATTR(HLF_D);
+    qfSepAttr = syn_name2attr((char_u *)"qfSeparator");
+    if (qfSepAttr == 0)
+	qfSepAttr = HL_ATTR(HLF_D);
+    qfLineAttr = syn_name2attr((char_u *)"qfLineNr");
+    if (qfLineAttr == 0)
+	qfLineAttr = HL_ATTR(HLF_N);
+
     if (qi->qf_lists[qi->qf_curlist].qf_nonevalid)
 	all = TRUE;
     qfp = qi->qf_lists[qi->qf_curlist].qf_start;
@@ -2724,22 +2741,26 @@ qf_list(exarg_T *eap)
 		vim_snprintf((char *)IObuff, IOSIZE, "%2d %s",
 							    i, (char *)fname);
 	    msg_outtrans_attr(IObuff, i == qi->qf_lists[qi->qf_curlist].qf_index
-					   ? HL_ATTR(HLF_QFL) : HL_ATTR(HLF_D));
+					   ? HL_ATTR(HLF_QFL) : qfFileAttr);
+
+	    if (qfp->qf_lnum != 0)
+		msg_puts_attr((char_u *)":", qfSepAttr);
 	    if (qfp->qf_lnum == 0)
 		IObuff[0] = NUL;
 	    else if (qfp->qf_col == 0)
-		sprintf((char *)IObuff, ":%ld", qfp->qf_lnum);
+		sprintf((char *)IObuff, "%ld", qfp->qf_lnum);
 	    else
-		sprintf((char *)IObuff, ":%ld col %d",
+		sprintf((char *)IObuff, "%ld col %d",
 						   qfp->qf_lnum, qfp->qf_col);
-	    sprintf((char *)IObuff + STRLEN(IObuff), "%s:",
+	    sprintf((char *)IObuff + STRLEN(IObuff), "%s",
 				  (char *)qf_types(qfp->qf_type, qfp->qf_nr));
-	    msg_puts_attr(IObuff, HL_ATTR(HLF_N));
+	    msg_puts_attr(IObuff, qfLineAttr);
+	    msg_puts_attr((char_u *)":", qfSepAttr);
 	    if (qfp->qf_pattern != NULL)
 	    {
 		qf_fmt_text(qfp->qf_pattern, IObuff, IOSIZE);
-		STRCAT(IObuff, ":");
 		msg_puts(IObuff);
+		msg_puts_attr((char_u *)":", qfSepAttr);
 	    }
 	    msg_puts((char_u *)" ");
 

src/structs.h

@@ -2091,12 +2091,8 @@ struct file_buffer
 #define B_IMODE_USE_INSERT -1	/*	Use b_p_iminsert value for search */
 #define B_IMODE_NONE 0		/*	Input via none */
 #define B_IMODE_LMAP 1		/*	Input via langmap */
-#ifndef USE_IM_CONTROL
-# define B_IMODE_LAST 1
-#else
-# define B_IMODE_IM 2		/*	Input via input method */
-# define B_IMODE_LAST 2
-#endif
+#define B_IMODE_IM 2		/*	Input via input method */
+#define B_IMODE_LAST 2
 
 #ifdef FEAT_KEYMAP
     short	b_kmap_state;	/* using "lmap" mappings */

src/term.c

@@ -4980,6 +4980,8 @@ check_termcode(
 		 *	add 0x08 for ALT
 		 *	add 0x10 for CTRL
 		 *	add 0x20 for mouse drag (0x40 is drag with left button)
+		 *	add 0x40 for mouse move (0x80 is move, 0x81 too)
+		 *		 0x43 (drag + release) is also move
 		 *  c == column + ' ' + 1 == column + 33
 		 *  r == row + ' ' + 1 == row + 33
 		 *
@@ -5121,9 +5123,15 @@ check_termcode(
 #   endif
 			)
 		{
-		    /* Keep the mouse_code before it's changed, so that we
-		     * remember that it was a mouse wheel click. */
-		    wheel_code = mouse_code;
+#   if defined(UNIX) && defined(FEAT_MOUSE_TTY)
+		    if (use_xterm_mouse() > 1 && mouse_code >= 0x80)
+			/* mouse-move event, using MOUSE_DRAG works */
+			mouse_code = MOUSE_DRAG;
+		    else
+#   endif
+			/* Keep the mouse_code before it's changed, so that we
+			 * remember that it was a mouse wheel click. */
+			wheel_code = mouse_code;
 		}
 #   ifdef FEAT_MOUSE_XTERM
 		else if (held_button == MOUSE_RELEASE

src/terminal.c

@@ -51,6 +51,7 @@
  * - implement term_setsize()
  * - Termdebug does not work when Vim build with mzscheme.  gdb hangs.
  * - MS-Windows GUI: WinBar has  tearoff item
+ * - Adding WinBar to terminal window doesn't display, text isn't shifted down.
  * - MS-Windows GUI: still need to type a key after shell exits?  #1924
  * - After executing a shell command the status line isn't redraw.
  * - What to store in a session file?  Shell at the prompt would be OK to
@@ -1302,9 +1303,9 @@ send_keys_to_term(term_T *term, int c, int typed)
 	case K_MOUSELEFT:
 	case K_MOUSERIGHT:
 	    if (mouse_row < W_WINROW(curwin)
-		    || mouse_row >= (W_WINROW(curwin) + curwin->w_height)
+		    || mouse_row > (W_WINROW(curwin) + curwin->w_height)
 		    || mouse_col < curwin->w_wincol
-		    || mouse_col >= W_ENDCOL(curwin)
+		    || mouse_col > W_ENDCOL(curwin)
 		    || dragging_outside)
 	    {
 		/* click or scroll outside the current window */
@@ -2172,10 +2173,13 @@ term_channel_closed(channel_T *ch)
 
 		if (term->tl_finish == 'c')
 		{
+		    aco_save_T	aco;
+
 		    /* ++close or term_finish == "close" */
 		    ch_log(NULL, "terminal job finished, closing window");
-		    curbuf = term->tl_buffer;
+		    aucmd_prepbuf(&aco, term->tl_buffer);
 		    do_bufdel(DOBUF_WIPE, (char_u *)"", 1, fnum, fnum, FALSE);
+		    aucmd_restbuf(&aco);
 		    break;
 		}
 		if (term->tl_finish == 'o' && term->tl_buffer->b_nwindows == 0)
@@ -3420,12 +3424,10 @@ term_and_job_init(
 	return FAIL;
     if (opt->jo_cwd != NULL)
 	cwd_wchar = enc_to_utf16(opt->jo_cwd, NULL);
-    if (opt->jo_env != NULL)
-    {
-	ga_init2(&ga_env, (int)sizeof(char*), 20);
-	win32_build_env(opt->jo_env, &ga_env);
-	env_wchar = ga_env.ga_data;
-    }
+
+    ga_init2(&ga_env, (int)sizeof(char*), 20);
+    win32_build_env(opt->jo_env, &ga_env, TRUE);
+    env_wchar = ga_env.ga_data;
 
     job = job_alloc();
     if (job == NULL)
@@ -3527,8 +3529,7 @@ term_and_job_init(
 failed:
     if (argvar->v_type == VAR_LIST)
 	vim_free(ga_cmd.ga_data);
-    if (opt->jo_env != NULL)
-	vim_free(ga_env.ga_data);
+    vim_free(ga_env.ga_data);
     vim_free(cmd_wchar);
     vim_free(cwd_wchar);
     if (spawn_config != NULL)

src/testdir/Make_all.mak

@@ -67,6 +67,7 @@ SCRIPTS_GUI =
 
 # Tests using runtest.vim
 # Keep test_alot*.res as the last one, sort the others.
+# test_largefile.res is omitted, it uses too much resources to run on CI.
 NEW_TESTS = test_arabic.res \
 	    test_arglist.res \
 	    test_assert.res \
@@ -83,6 +84,7 @@ NEW_TESTS = test_arabic.res \
 	    test_close_count.res \
 	    test_cmdline.res \
 	    test_command_count.res \
+	    test_comparators.res \
 	    test_crypt.res \
 	    test_cscope.res \
 	    test_curswant.res \
@@ -91,13 +93,17 @@ NEW_TESTS = test_arabic.res \
 	    test_display.res \
 	    test_edit.res \
 	    test_erasebackword.res \
+	    test_escaped_glob.res \
+	    test_exec_while_if.res \
 	    test_exists.res \
+	    test_exists_autocmd.res \
 	    test_farsi.res \
 	    test_file_size.res \
 	    test_find_complete.res \
 	    test_fixeol.res \
 	    test_fnameescape.res \
 	    test_fold.res \
+	    test_getcwd.res \
 	    test_getvar.res \
 	    test_gf.res \
 	    test_gn.res \
@@ -109,6 +115,7 @@ NEW_TESTS = test_arabic.res \
 	    test_highlight.res \
 	    test_history.res \
 	    test_hlsearch.res \
+	    test_iminsert.res \
 	    test_increment.res \
 	    test_increment_dbcs.res \
 	    test_ins_complete.res \
@@ -120,14 +127,13 @@ NEW_TESTS = test_arabic.res \
 	    test_listchars.res \
 	    test_listdict.res \
 	    test_listlbr.res \
-	    test_listlbr_utf8.res \
 	    test_lua.res \
 	    test_makeencoding.res \
 	    test_man.res \
+	    test_maparg.res \
 	    test_marks.res \
 	    test_matchadd_conceal.res \
 	    test_mksession.res \
-	    test_mksession_utf8.res \
 	    test_nested_function.res \
 	    test_netbeans.res \
 	    test_normal.res \
@@ -136,6 +142,7 @@ NEW_TESTS = test_arabic.res \
 	    test_packadd.res \
 	    test_paste.res \
 	    test_perl.res \
+	    test_plus_arg_edit.res \
 	    test_preview.res \
 	    test_profile.res \
 	    test_python2.res \
@@ -144,8 +151,9 @@ NEW_TESTS = test_arabic.res \
 	    test_pyx3.res \
 	    test_quickfix.res \
 	    test_quotestar.res \
-	    test_retab.res \
+	    test_regex_char_classes.res \
 	    test_registers.res \
+	    test_retab.res \
 	    test_ruby.res \
 	    test_scrollbind.res \
 	    test_search.res \
@@ -153,7 +161,6 @@ NEW_TESTS = test_arabic.res \
 	    test_smartindent.res \
 	    test_spell.res \
 	    test_startup.res \
-	    test_startup_utf8.res \
 	    test_stat.res \
 	    test_substitute.res \
 	    test_swap.res \
@@ -163,10 +170,11 @@ NEW_TESTS = test_arabic.res \
 	    test_tcl.res \
 	    test_terminal.res \
 	    test_terminal_fail.res \
+	    test_textformat.res \
 	    test_textobjects.res \
 	    test_undo.res \
-	    test_usercommands.res \
 	    test_user_func.res \
+	    test_usercommands.res \
 	    test_viminfo.res \
 	    test_vimscript.res \
 	    test_visual.res \

src/testdir/runtest.vim

@@ -286,6 +286,10 @@ for s:test in sort(s:tests)
     call add(s:messages, 'Flaky test failed, running it again')
     let first_run = v:errors
 
+    " Flakiness is often caused by the system being very busy.  Sleep a couple
+    " of seconds to have a higher chance of succeeding the second time.
+    sleep 2
+
     let v:errors = []
     call RunTheTest(s:test)
     if len(v:errors) > 0

src/testdir/test_alot_utf8.vim

@@ -7,8 +7,11 @@
 
 source test_charsearch_utf8.vim
 source test_expr_utf8.vim
+source test_listlbr_utf8.vim
 source test_matchadd_conceal_utf8.vim
+source test_mksession_utf8.vim
 source test_regexp_utf8.vim
 source test_source_utf8.vim
+source test_startup_utf8.vim
 source test_utf8.vim
 source test_utf8_comparisons.vim

src/testdir/test_escaped_glob.vim

@@ -9,12 +9,19 @@ function SetUp()
 endfunction
 
 function Test_glob()
+  if !has('unix')
+    " This test fails on Windows because of the special characters in the
+    " filenames. Disable the test on non-Unix systems for now.
+    return
+  endif
   call assert_equal("", glob('Xxx\{'))
   call assert_equal("", glob('Xxx\$'))
   w! Xxx{
   w! Xxx\$
   call assert_equal("Xxx{", glob('Xxx\{'))
   call assert_equal("Xxx$", glob('Xxx\$'))
+  call delete('Xxx{')
+  call delete('Xxx$')
 endfunction
 
 function Test_globpath()

src/testdir/test_iminsert.vim

@@ -0,0 +1,29 @@
+if !has('multi_byte')
+  finish
+endif
+
+source view_util.vim
+
+let s:imactivatefunc_called = 0
+let s:imstatusfunc_called = 0
+
+func IM_activatefunc(active)
+  let s:imactivatefunc_called = 1
+endfunc
+
+func IM_statusfunc()
+  let s:imstatusfunc_called = 1
+  return 0
+endfunc
+
+func Test_iminsert2()
+  set imactivatefunc=IM_activatefunc
+  set imstatusfunc=IM_statusfunc
+  set iminsert=2
+  normal! i
+  set iminsert=0
+  set imactivatefunc=
+  set imstatusfunc=
+  call assert_equal(1, s:imactivatefunc_called)
+  call assert_equal(1, s:imstatusfunc_called)
+endfunc

src/testdir/test_mksession_utf8.vim

@@ -99,6 +99,7 @@ func Test_mksession_utf8()
   call delete('test_mks.out')
   call delete(tmpfile)
   let &wrap = wrap_save
+  set sessionoptions& splitbelow& fileencoding&
 endfunc
 
 " vim: shiftwidth=2 sts=2 expandtab

src/testdir/test_plus_arg_edit.vim

@@ -5,4 +5,6 @@ function Test_edit()
   edit +1|s/|/PIPE/|w Xfile1| e Xfile2|1 | s/\//SLASH/|w
   call assert_equal(["fooPIPEbar"], readfile("Xfile1"))
   call assert_equal(["fooSLASHbar"], readfile("Xfile2"))
+  call delete('Xfile1')
+  call delete('Xfile2')
 endfunction

src/testdir/test_terminal.vim

@@ -352,9 +352,7 @@ func Test_terminal_curwin()
   call delete('Xtext')
 endfunc
 
-func Test_finish_open_close()
-  call assert_equal(1, winnr('$'))
-
+func s:get_sleep_cmd()
   if s:python != ''
     let cmd = s:python . " test_short_sleep.py"
     let waittime = 500
@@ -367,12 +365,18 @@ func Test_finish_open_close()
       let cmd = 'sleep 1'
     endif
   endif
+  return [cmd, waittime]
+endfunc
+
+func Test_terminal_finish_open_close()
+  call assert_equal(1, winnr('$'))
+
+  let [cmd, waittime] = s:get_sleep_cmd()
 
   exe 'terminal ++close ' . cmd
   call assert_equal(2, winnr('$'))
   wincmd p
   call WaitFor("winnr('$') == 1", waittime)
-  call assert_equal(1, winnr('$'))
 
   call term_start(cmd, {'term_finish': 'close'})
   call assert_equal(2, winnr('$'))
@@ -430,6 +434,27 @@ func Test_terminal_cwd()
   call delete('Xdir', 'rf')
 endfunc
 
+func Test_terminal_servername()
+  if !has('clientserver')
+    return
+  endif
+  let g:buf = Run_shell_in_terminal({})
+  " Wait for the shell to display a prompt
+  call WaitFor('term_getline(g:buf, 1) != ""')
+  if has('win32')
+    call term_sendkeys(g:buf, "echo %VIM_SERVERNAME%\r")
+  else
+    call term_sendkeys(g:buf, "echo $VIM_SERVERNAME\r")
+  endif
+  call term_wait(g:buf)
+  call Stop_shell_in_terminal(g:buf)
+  call WaitFor('getline(2) == v:servername')
+  call assert_equal(v:servername, getline(2))
+
+  exe g:buf . 'bwipe'
+  unlet g:buf
+endfunc
+
 func Test_terminal_env()
   let g:buf = Run_shell_in_terminal({'env': {'TESTENV': 'correct'}})
   " Wait for the shell to display a prompt
@@ -743,3 +768,29 @@ func Test_terminal_composing_unicode()
   unlet g:job
   let &encoding = save_enc
 endfunc
+
+func Test_terminal_aucmd_on_close()
+  fun Nop()
+    let s:called = 1
+  endfun
+
+  aug repro
+      au!
+      au BufWinLeave * call Nop()
+  aug END
+
+  let [cmd, waittime] = s:get_sleep_cmd()
+
+  call assert_equal(1, winnr('$'))
+  new
+  call setline(1, ['one', 'two'])
+  exe 'term ++close ' . cmd
+  wincmd p
+  call WaitFor("winnr('$') == 2", waittime)
+  call assert_equal(1, s:called)
+  bwipe!
+
+  unlet s:called
+  au! repro
+  delfunc Nop
+endfunc

src/ui.c

@@ -3307,7 +3307,7 @@ ui_focus_change(
 }
 #endif
 
-#if defined(USE_IM_CONTROL) || defined(PROTO)
+#if defined(FEAT_MBYTE) || defined(PROTO)
 /*
  * Save current Input Method status to specified place.
  */

src/version.c

@@ -771,6 +771,42 @@ static char *(features[]) =
 
 static int included_patches[] =
 {   /* Add new patch number below this line */
+/**/
+    1338,
+/**/
+    1337,
+/**/
+    1336,
+/**/
+    1335,
+/**/
+    1334,
+/**/
+    1333,
+/**/
+    1332,
+/**/
+    1331,
+/**/
+    1330,
+/**/
+    1329,
+/**/
+    1328,
+/**/
+    1327,
+/**/
+    1326,
+/**/
+    1325,
+/**/
+    1324,
+/**/
+    1323,
+/**/
+    1322,
+/**/
+    1321,
 /**/
     1320,
 /**/

src/vim.h

@@ -533,15 +533,6 @@ typedef unsigned long u8char_T;	    /* long should be 32 bits or more */
 # endif
 #endif
 
-/*
- * Check input method control.
- */
-#if defined(FEAT_XIM) \
-    || (defined(FEAT_GUI) && (defined(FEAT_MBYTE_IME) || defined(GLOBAL_IME))) \
-    || (defined(FEAT_GUI_MAC) && defined(FEAT_MBYTE))
-# define USE_IM_CONTROL
-#endif
-
 /*
  * For dynamically loaded gettext library.  Currently, only for Win32.
  */
@@ -1485,6 +1476,11 @@ typedef UINT32_TYPEDEF UINT32_T;
 #define MIN_COLUMNS	12	/* minimal columns for screen */
 #define MIN_LINES	2	/* minimal lines for screen */
 #define STATUS_HEIGHT	1	/* height of a status line under a window */
+#ifdef FEAT_MENU		/* height of a status line under a window */
+# define WINBAR_HEIGHT(wp)	(wp)->w_winbar_height
+#else
+# define WINBAR_HEIGHT(wp)	0
+#endif
 #define QF_WINHEIGHT	10	/* default height for quickfix window */
 
 /*
@@ -1809,14 +1805,15 @@ typedef int sock_T;
 
 /* Include option.h before structs.h, because the number of window-local and
  * buffer-local options is used there. */
-#include "option.h"	    /* options and default values */
+#include "option.h"	/* options and default values */
+
+#include "beval.h"	/* BalloonEval */
 
 /* Note that gui.h is included by structs.h */
 
-#include "structs.h"	    /* file that defines many structures */
+#include "structs.h"	/* defines many structures */
 
 #include "alloc.h"
-#include "beval.h"
 
 /* Values for "do_profiling". */
 #define PROF_NONE	0	/* profiling not started */

src/window.c

@@ -1081,8 +1081,7 @@ win_split_ins(
 
     /* Set w_fraction now so that the cursor keeps the same relative
      * vertical position. */
-    if (oldwin->w_height > 0)
-	set_fraction(oldwin);
+    set_fraction(oldwin);
     wp->w_fraction = oldwin->w_fraction;
 
     if (flags & WSP_VERT)
@@ -1099,21 +1098,14 @@ win_split_ins(
 	    /* set height and row of new window to full height */
 	    wp->w_winrow = tabline_height();
 	    win_new_height(wp, curfrp->fr_height - (p_ls > 0)
-#ifdef FEAT_MENU
-		    - wp->w_winbar_height
-#endif
-		    );
+							  - WINBAR_HEIGHT(wp));
 	    wp->w_status_height = (p_ls > 0);
 	}
 	else
 	{
 	    /* height and row of new window is same as current window */
 	    wp->w_winrow = oldwin->w_winrow;
-	    win_new_height(wp, oldwin->w_height
-#ifdef FEAT_MENU
-		    + oldwin->w_winbar_height
-#endif
-		    );
+	    win_new_height(wp, oldwin->w_height + WINBAR_HEIGHT(oldwin));
 	    wp->w_status_height = oldwin->w_status_height;
 	}
 	frp->fr_height = curfrp->fr_height;
@@ -1172,10 +1164,7 @@ win_split_ins(
 	if (flags & (WSP_TOP | WSP_BOT))
 	{
 	    int new_fr_height = curfrp->fr_height - new_size
-#ifdef FEAT_MENU
-		+ wp->w_winbar_height
-#endif
-		;
+							  + WINBAR_HEIGHT(wp) ;
 
 	    if (!((flags & WSP_BOT) && p_ls == 0))
 		new_fr_height -= STATUS_HEIGHT;
@@ -1191,7 +1180,8 @@ win_split_ins(
 	}
 	else		/* new window below current one */
 	{
-	    wp->w_winrow = oldwin->w_winrow + oldwin->w_height + STATUS_HEIGHT;
+	    wp->w_winrow = oldwin->w_winrow + oldwin->w_height
+				       + STATUS_HEIGHT + WINBAR_HEIGHT(oldwin);
 	    wp->w_status_height = oldwin->w_status_height;
 	    if (!(flags & WSP_BOT))
 		oldwin->w_status_height = STATUS_HEIGHT;
@@ -2868,10 +2858,7 @@ frame_new_height(
 	/* Simple case: just one window. */
 	win_new_height(topfrp->fr_win,
 				    height - topfrp->fr_win->w_status_height
-#ifdef FEAT_MENU
-				    - topfrp->fr_win->w_winbar_height
-#endif
-				    );
+					      - WINBAR_HEIGHT(topfrp->fr_win));
     }
     else if (topfrp->fr_layout == FR_ROW)
     {
@@ -3218,10 +3205,7 @@ frame_fix_width(win_T *wp)
 frame_fix_height(win_T *wp)
 {
     wp->w_frame->fr_height = wp->w_height + wp->w_status_height
-#ifdef FEAT_MENU
-	+ wp->w_winbar_height
-#endif
-	;
+							  + WINBAR_HEIGHT(wp) ;
 }
 
 /*
@@ -5682,11 +5666,13 @@ win_drag_vsep_line(win_T *dragwin, int offset)
 
 /*
  * Set wp->w_fraction for the current w_wrow and w_height.
+ * Has no effect when the window is less than two lines.
  */
     void
 set_fraction(win_T *wp)
 {
-    wp->w_fraction = ((long)wp->w_wrow * FRACTION_MULT
+    if (wp->w_height > 1)
+	wp->w_fraction = ((long)wp->w_wrow * FRACTION_MULT
 				    + wp->w_height / 2) / (long)wp->w_height;
 }