patch 8.2.1725: not all Pascal files are recognized

Problem:    Not all Pascal files are recognized.
Solution:   Add filetype patterns. (Doug Kearns)

.cirrus.yml

@@ -11,6 +11,9 @@ freebsd_12_task:
     - NPROC=$(getconf _NPROCESSORS_ONLN)
     - ./configure --with-features=${FEATURES}
     - make -j${NPROC}
-    - src/vim --version
   test_script:
-    - make test
+    - src/vim --version
+      # run tests as user "cirrus" instead of root
+    - pw useradd cirrus -m
+    - chown -R cirrus:cirrus .
+    - sudo -u cirrus make test

.github/CODEOWNERS

@@ -0,0 +1,152 @@
+# Lines starting with '#' are comments.
+# Each line is a file pattern followed by one or more owners.
+# You can use github users with @user or email addresses
+
+# These owners will be the default owners for everything in the repo.
+#*       @brammool
+
+# Order is important. The last matching pattern has the most precedence.
+# So if a pull request only touches javascript files, only these owners
+# will be requested to review.
+
+src/iscygpty.*				@k-takata
+src/libvterm/				@leonerd
+
+runtime/autoload/getscript.vim		@cecamp
+runtime/autoload/netrw.vim		@cecamp
+runtime/autoload/netrwFileHandlers.vim	@cecamp
+runtime/autoload/netrwSettings.vim	@cecamp
+runtime/autoload/rubycomplete.vim	@segfault @dkearns
+runtime/autoload/tar.vim		@cecamp
+runtime/autoload/vimball.vim		@cecamp
+runtime/autoload/zip.vim		@cecamp
+runtime/compiler/checkstyle.vim		@dkearns
+runtime/compiler/cucumber.vim		@tpope
+runtime/compiler/dart.vim		@dkearns
+runtime/compiler/dart2js.vim		@dkearns
+runtime/compiler/dart2native.vim	@dkearns
+runtime/compiler/dartanalyser.vim	@dkearns
+runtime/compiler/dartdevc.vim		@dkearns
+runtime/compiler/dartdoc.vim		@dkearns
+runtime/compiler/dartfmt.vim		@dkearns
+runtime/compiler/eruby.vim		@dkearns
+runtime/compiler/gawk.vim		@dkearns
+runtime/compiler/gjs.vim		@dkearns
+runtime/compiler/haml.vim		@tpope
+runtime/compiler/javac.vim		@dkearns
+runtime/compiler/jest.vim		@dkearns
+runtime/compiler/jjs.vim		@dkearns
+runtime/compiler/jshint.vim		@dkearns
+runtime/compiler/jsonlint.vim		@dkearns
+runtime/compiler/php.vim		@dkearns
+runtime/compiler/rake.vim		@tpope @dkearns
+runtime/compiler/rhino.vim		@dkearns
+runtime/compiler/rspec.vim		@tpope @dkearns
+runtime/compiler/rubocop.vim		@dkearns
+runtime/compiler/ruby.vim		@tpope @dkearns
+runtime/compiler/rubyunit.vim		@dkearns
+runtime/compiler/sass.vim		@tpope
+runtime/compiler/se.vim			@dkearns
+runtime/compiler/stylelint.vim		@dkearns
+runtime/compiler/tcl.vim		@dkearns
+runtime/compiler/tidy.vim		@dkearns
+runtime/compiler/ts-node.vim		@dkearns
+runtime/compiler/tsc.vim		@dkearns
+runtime/compiler/typedoc.vim		@dkearns
+runtime/compiler/xmllint.vim		@dkearns
+runtime/compiler/xo.vim			@dkearns
+runtime/doc/pi_getscript.txt		@cecamp
+runtime/doc/pi_logipat.txt		@cecamp
+runtime/doc/pi_netrw.txt		@cecamp
+runtime/doc/pi_tar.txt			@cecamp
+runtime/doc/pi_vimball.txt		@cecamp
+runtime/doc/pi_zip.txt			@cecamp
+runtime/ftplugin/bst.vim		@tpope
+runtime/ftplugin/css.vim		@dkearns
+runtime/ftplugin/cucumber.vim		@tpope
+runtime/ftplugin/eiffel.vim		@dkearns
+runtime/ftplugin/eruby.vim		@tpope @dkearns
+runtime/ftplugin/git.vim		@tpope
+runtime/ftplugin/gitcommit.vim		@tpope
+runtime/ftplugin/gitconfig.vim		@tpope
+runtime/ftplugin/gitrebase.vim		@tpope
+runtime/ftplugin/gitsendemail.vim	@tpope
+runtime/ftplugin/haml.vim		@tpope
+runtime/ftplugin/hgcommit.vim		@k-takata
+runtime/ftplugin/javascript.vim		@dkearns
+runtime/ftplugin/javascriptreact.vim	@dkearns
+runtime/ftplugin/liquid.vim		@tpope
+runtime/ftplugin/markdown.vim		@tpope
+runtime/ftplugin/matlab.vim		@cecamp
+runtime/ftplugin/nsis.vim		@k-takata
+runtime/ftplugin/pdf.vim		@tpope
+runtime/ftplugin/ruby.vim		@tpope @dkearns
+runtime/ftplugin/sass.vim		@tpope
+runtime/ftplugin/scss.vim		@tpope
+runtime/ftplugin/tmux.vim		@ericpruitt
+runtime/ftplugin/typescript.vim		@dkearns
+runtime/ftplugin/typescriptreact.vim	@dkearns
+runtime/indent/bst.vim			@tpope
+runtime/indent/cucumber.vim		@tpope
+runtime/indent/dosbatch.vim		@k-takata
+runtime/indent/eruby.vim		@tpope @dkearns
+runtime/indent/gitconfig.vim		@tpope
+runtime/indent/haml.vim			@tpope
+runtime/indent/liquid.vim		@tpope
+runtime/indent/nsis.vim			@k-takata
+runtime/indent/ruby.vim			@AndrewRadev @dkearns
+runtime/indent/sass.vim			@tpope
+runtime/indent/scss.vim			@tpope
+runtime/indent/teraterm.vim		@k-takata
+runtime/plugin/getscriptPlugin.vim	@cecamp
+runtime/plugin/logiPat.vim		@cecamp
+runtime/plugin/netrwPlugin.vim		@cecamp
+runtime/plugin/tarPlugin.vim		@cecamp
+runtime/plugin/vimballPlugin.vim	@cecamp
+runtime/plugin/zipPlugin.vim		@cecamp
+runtime/syntax/amiga.vim		@cecamp
+runtime/syntax/bst.vim			@tpope
+runtime/syntax/csh.vim			@cecamp
+runtime/syntax/cucumber.vim		@tpope
+runtime/syntax/dcl.vim			@cecamp
+runtime/syntax/elmfilt.vim		@cecamp
+runtime/syntax/eruby.vim		@tpope @dkearns
+runtime/syntax/exports.vim		@cecamp
+runtime/syntax/git.vim			@tpope
+runtime/syntax/gitcommit.vim		@tpope
+runtime/syntax/gitconfig.vim		@tpope
+runtime/syntax/gitrebase.vim		@tpope
+runtime/syntax/haml.vim			@tpope
+runtime/syntax/hgcommit.vim		@k-takata
+runtime/syntax/lex.vim			@cecamp
+runtime/syntax/liquid.vim		@tpope
+runtime/syntax/lisp.vim			@cecamp
+runtime/syntax/lynx.vim			@dkearns
+runtime/syntax/mailcap.vim		@dkearns
+runtime/syntax/make.vim			@rohieb
+runtime/syntax/make.vim			@rohieb
+runtime/syntax/maple.vim		@cecamp
+runtime/syntax/markdown.vim		@tpope
+runtime/syntax/netrw.vim		@cecamp
+runtime/syntax/nsis.vim			@k-takata
+runtime/syntax/pdf.vim			@tpope
+runtime/syntax/php.vim			@TysonAndre
+runtime/syntax/privoxy.vim		@dkearns
+runtime/syntax/rpcgen.vim		@cecamp
+runtime/syntax/ruby.vim			@dkearns
+runtime/syntax/sass.vim			@tpope
+runtime/syntax/scss.vim			@tpope
+runtime/syntax/sh.vim			@cecamp
+runtime/syntax/sm.vim			@cecamp
+runtime/syntax/tags.vim			@cecamp
+runtime/syntax/teraterm.vim		@k-takata
+runtime/syntax/tex.vim			@cecamp
+runtime/syntax/tidy.vim			@dkearns
+runtime/syntax/tmux.vim			@ericpruitt
+runtime/syntax/vim.vim			@cecamp
+runtime/syntax/wget.vim			@dkearns
+runtime/syntax/xbl.vim			@dkearns
+runtime/syntax/xmath.vim		@cecamp
+runtime/syntax/xslt.vim			@Boobies
+runtime/syntax/xxd.vim			@cecamp
+runtime/syntax/yacc.vim			@cecamp

.github/ISSUE_TEMPLATE/feature_request.md

@@ -8,7 +8,7 @@ labels: enhancement
 
 _Instructions: Replace the template text and remove irrelevant text (including this line)_
 
-**Is your feature request related something that is currently hard to do? Please describe.**
+**Is your feature request about something that is currently impossible or hard to do? Please describe the problem.**
 A clear and concise description of what is hard to do. Ex. It is difficult to [...] when [...]
 (If it is related to runtime files, please check their header for where to discuss enhancements.)
 

.github/workflows/ci-windows.yaml

@@ -0,0 +1,228 @@
+name: GitHub CI
+
+on:
+  push:
+    branches:
+      - '*'
+  pull_request:
+
+env:
+  VCVARSALL: C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\vcvarsall.bat
+
+  # Interfaces
+  # Lua
+  LUA_VER: 54
+  LUA_VER_DOT: '5.4'
+  LUA_RELEASE: 5.4.0
+  LUA32_URL: https://downloads.sourceforge.net/luabinaries/lua-%LUA_RELEASE%_Win32_dllw6_lib.zip
+  LUA64_URL: https://downloads.sourceforge.net/luabinaries/lua-%LUA_RELEASE%_Win64_dllw6_lib.zip
+  LUA_DIR: D:\Lua
+  # Python 2
+  PYTHON_VER: 27
+  PYTHON_VER_DOT: '2.7'
+  # Python 3
+  PYTHON3_VER: 38
+  PYTHON3_VER_DOT: '3.8'
+
+  # Other dependencies
+  # winpty
+  WINPTY_URL: https://github.com/rprichard/winpty/releases/download/0.4.3/winpty-0.4.3-msvc2015.zip
+
+  # Escape sequences
+  COL_RED: "\x1b[31m"
+  COL_GREEN: "\x1b[32m"
+  COL_YELLOW: "\x1b[33m"
+  COL_RESET: "\x1b[m"
+
+jobs:
+  build:
+    runs-on: windows-latest
+
+    strategy:
+      matrix:
+        toolchain: [msvc, mingw]
+        arch: [x64, x86]
+        features: [HUGE, NORMAL]
+        include:
+          - arch: x64
+            vcarch: amd64
+            warch: x64
+            bits: 64
+            msystem: MINGW64
+            cygreg: registry
+            pyreg: ""
+          - arch: x86
+            vcarch: x86
+            warch: ia32
+            bits: 32
+            msystem: MINGW32
+            cygreg: registry32
+            pyreg: "-32"
+        exclude:
+          - toolchain: msvc
+            arch: x64
+            features: NORMAL
+          - toolchain: mingw
+            arch: x86
+            features: NORMAL
+
+    steps:
+    - name: Initalize
+      id: init
+      shell: bash
+      run: |
+        git config --global core.autocrlf input
+        python_dir=$(cat "/proc/${{ matrix.cygreg }}/HKEY_LOCAL_MACHINE/SOFTWARE/Python/PythonCore/${PYTHON_VER_DOT}/InstallPath/@")
+        python3_dir=$(cat "/proc/${{ matrix.cygreg }}/HKEY_LOCAL_MACHINE/SOFTWARE/Python/PythonCore/${PYTHON3_VER_DOT}${{ matrix.pyreg }}/InstallPath/@")
+        echo "::set-env name=PYTHON_DIR::$python_dir"
+        echo "::set-env name=PYTHON3_DIR::$python3_dir"
+
+    - uses: msys2/setup-msys2@v2
+      if: matrix.toolchain == 'mingw'
+      with:
+        msystem: ${{ matrix.msystem }}
+        release: false
+
+    - uses: actions/checkout@v2
+
+    - name: Create a list of download URLs
+      shell: cmd
+      run: |
+        type NUL > urls.txt
+        echo %LUA_RELEASE%>> urls.txt
+        echo %WINPTY_URL%>> urls.txt
+
+    - name: Cache downloaded files
+      uses: actions/cache@v2
+      with:
+        path: downloads
+        key: ${{ runner.os }}-${{ matrix.bits }}-${{ hashFiles('urls.txt') }}
+
+    - name: Download dependencies
+      shell: cmd
+      run: |
+        path C:\Program Files\7-Zip;%path%
+        if not exist downloads mkdir downloads
+
+        echo %COL_GREEN%Download Lua%COL_RESET%
+        call :downloadfile %LUA${{ matrix.bits }}_URL% downloads\lua.zip
+        7z x downloads\lua.zip -o%LUA_DIR% > nul || exit 1
+
+        echo %COL_GREEN%Download winpty%COL_RESET%
+        call :downloadfile %WINPTY_URL% downloads\winpty.zip
+        7z x -y downloads\winpty.zip -oD:\winpty > nul || exit 1
+        copy /Y D:\winpty\${{ matrix.warch }}\bin\winpty.dll        src\winpty${{ matrix.bits }}.dll
+        copy /Y D:\winpty\${{ matrix.warch }}\bin\winpty-agent.exe  src\
+
+        goto :eof
+
+        :downloadfile
+        :: call :downloadfile <URL> <localfile>
+        if not exist %2 (
+          curl -f -L %1 -o %2
+        )
+        if ERRORLEVEL 1 (
+          rem Retry once.
+          curl -f -L %1 -o %2 || exit 1
+        )
+        goto :eof
+
+    - name: Copy src directory to src2
+      shell: cmd
+      run: |
+        xcopy src src2\ /E > nul
+
+    - name: Build (MSVC)
+      if: matrix.toolchain == 'msvc'
+      shell: cmd
+      run: |
+        call "%VCVARSALL%" ${{ matrix.vcarch }}
+        cd src
+        :: Filter out the progress bar from the build log
+        sed -e "s/@<<$/@<< | sed -e 's#.*\\\\r.*##'/" Make_mvc.mak > Make_mvc2.mak
+        if "${{ matrix.features }}"=="HUGE" (
+          nmake -nologo -f Make_mvc2.mak ^
+            FEATURES=${{ matrix.features }} ^
+            GUI=yes IME=yes ICONV=yes VIMDLL=yes ^
+            DYNAMIC_LUA=yes LUA=%LUA_DIR% ^
+            DYNAMIC_PYTHON=yes PYTHON=%PYTHON_DIR% ^
+            DYNAMIC_PYTHON3=yes PYTHON3=%PYTHON3_DIR%
+        ) else (
+          nmake -nologo -f Make_mvc2.mak ^
+            FEATURES=${{ matrix.features }} ^
+            GUI=yes IME=yes ICONV=yes VIMDLL=yes
+        )
+        if not exist vim${{ matrix.bits }}.dll (
+          echo %COL_RED%Build failure.%COL_RESET%
+          exit 1
+        )
+
+    - name: Build (MinGW)
+      if: matrix.toolchain == 'mingw'
+      shell: msys2 {0}
+      run: |
+        cd src
+        if [ "${{ matrix.features }}" = "HUGE" ]; then
+          mingw32-make -f Make_ming.mak -j2 \
+            FEATURES=${{ matrix.features }} \
+            GUI=yes IME=yes ICONV=yes VIMDLL=yes \
+            DYNAMIC_LUA=yes LUA=${LUA_DIR} \
+            DYNAMIC_PYTHON=yes PYTHON=${PYTHON_DIR} \
+            DYNAMIC_PYTHON3=yes PYTHON3=${PYTHON3_DIR} \
+            STATIC_STDCPLUS=yes
+        else
+          mingw32-make -f Make_ming.mak -j2 \
+            FEATURES=${{ matrix.features }} \
+            GUI=yes IME=yes ICONV=yes VIMDLL=yes \
+            STATIC_STDCPLUS=yes
+        fi
+
+#    - name: Prepare Artifact
+#      shell: cmd
+#      run: |
+#        mkdir artifacts
+#        copy src\*vim.exe artifacts
+#        copy src\vim*.dll artifacts
+#
+#    - name: Upload Artifact
+#      uses: actions/upload-artifact@v1
+#      with:
+#        name: vim${{ matrix.bits }}-${{ matrix.toolchain }}
+#        path: ./artifacts
+
+    - name: Test
+      shell: cmd
+      timeout-minutes: 20
+      run: |
+        PATH %LUA_DIR%;C:\msys64\${{ matrix.msystem }}\bin;%PATH%;%PYTHON3_DIR%
+        call "%VCVARSALL%" ${{ matrix.vcarch }}
+        cd src
+        echo.
+        echo %COL_GREEN%vim version:%COL_RESET%
+        .\vim --version || exit 1
+
+        echo %COL_GREEN%Start testing vim in background.%COL_RESET%
+        start cmd /c "cd ..\src2\testdir & nmake -nologo -f Make_dos.mak VIMPROG=..\..\src\vim > nul & echo done>done.txt"
+
+        echo %COL_GREEN%Test gvim:%COL_RESET%
+        cd testdir
+        nmake -nologo -f Make_dos.mak VIMPROG=..\gvim || exit 1
+        cd ..
+
+        echo %COL_GREEN%Wait for vim tests to finish.%COL_RESET%
+        cd ..\src2\testdir
+        :: Wait about 10 minutes.
+        for /L %%i in (1,1,600) do (
+          if exist done.txt goto exitloop
+          ping -n 2 localhost > nul
+        )
+        set timeout=1
+        :exitloop
+
+        echo %COL_GREEN%Test results of vim:%COL_RESET%
+        if exist messages type messages
+        nmake -nologo -f Make_dos.mak report VIMPROG=..\..\src\vim || exit 1
+        if "%timeout%"=="1" (
+          echo %COL_RED%Timed out.%COL_RESET%
+          exit 1
+        )

.travis.yml

@@ -1,26 +1,32 @@
 language: c
 
+env:
+  global:
+    - BUILD=yes TEST=test CONFOPT= LEAK_CFLAGS="-DEXITFREE" SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no LOG_DIR="$TRAVIS_BUILD_DIR/logs"
+
 _anchors:
   envs:
     - &tiny-nogui
-      BUILD=yes TEST=test FEATURES=tiny CONFOPT="--disable-gui" SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+      FEATURES=tiny TEST=testtiny CONFOPT="--disable-gui"
     - &tiny
-      BUILD=yes TEST=test FEATURES=tiny CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+      FEATURES=tiny TEST=testtiny
     - &small
-      BUILD=yes TEST=test FEATURES=small CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+      FEATURES=small TEST=testtiny
     - &normal
-      BUILD=yes TEST=test FEATURES=normal CONFOPT= SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+      FEATURES=normal
     - &linux-huge
-      BUILD=yes TEST="scripttests test_libvterm" CFLAGS="--coverage -DUSE_GCOV_FLUSH" LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
+      FEATURES=huge TEST="scripttests test_libvterm"
       CONFOPT="--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
     - &osx-huge # macOS build
-      BUILD=yes TEST=test FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=no
-      CONFOPT="--enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
+      FEATURES=huge
+      CONFOPT="--enable-perlinterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
     - &unittests
-      BUILD=no TEST=unittests CFLAGS="--coverage -DUSE_GCOV_FLUSH" LDFLAGS=--coverage FEATURES=huge SHADOWOPT= SRCDIR=./src CHECK_AUTOCONF=yes
+      BUILD=no TEST=unittests FEATURES=huge CHECK_AUTOCONF=yes
+    - &coverage
+      CFLAGS="--coverage -DUSE_GCOV_FLUSH" LDFLAGS=--coverage
     - &asan # ASAN build
-      SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize=address -fno-omit-frame-pointer"
-      ASAN_OPTIONS="print_stacktrace=1 log_path=asan" LSAN_OPTIONS="suppressions=$TRAVIS_BUILD_DIR/src/testdir/lsan-suppress.txt"
+      SANITIZER_CFLAGS="-g -O1 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize-recover=all -fsanitize=address -fsanitize=undefined -fno-omit-frame-pointer"
+      ASAN_OPTIONS="print_stacktrace=1 log_path=$LOG_DIR/asan" UBSAN_OPTIONS="print_stacktrace=1 log_path=$LOG_DIR/ubsan" LSAN_OPTIONS="suppressions=$TRAVIS_BUILD_DIR/src/testdir/lsan-suppress.txt"
     - &shadowopt
       SHADOWOPT="-C src/shadow" SRCDIR=./src/shadow
 
@@ -29,7 +35,7 @@ _anchors:
     dist: bionic
     addons:
       apt:
-        packages:
+        packages: &apt-packages
           - autoconf
           - clang
           - lcov
@@ -63,7 +69,11 @@ _anchors:
         fi
     before_script:
       - sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=0
-      - sudo bash ci/load-snd-dummy.sh || true
+      # It appears we can load "snd-dummy" on only amd64.
+      - |
+        if [[ "${TRAVIS_CPU_ARCH}" = amd64 ]]; then
+          sudo bash ci/load-snd-dummy.sh || true
+        fi
       - sudo usermod -a -G audio $USER
       - do_test() { sg audio "sg $(id -gn) '$*'"; }
 
@@ -87,7 +97,7 @@ _anchors:
       # Lua is not installed on macOS
       - export LUA_PREFIX=/usr/local
 
-  coverage: &coverage
+  coverage: &eval-coverage
     # needed for https support for coveralls building cffi only works with gcc,
     # not with clang
     - CC=gcc pip install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
@@ -98,13 +108,14 @@ _anchors:
     # Update pyenv to fix the error "/opt/pyenv/libexec/pyenv: line 43: cd: asan_symbolize-6.0: Not a directory".
     # https://github.com/pyenv/pyenv/issues/580
     - (cd "${PYENV_ROOT}" && git fetch -p origin && git checkout "$(git rev-list --tags -n1)") &>/dev/null || true
-    - find . -type f -name 'asan.*' -size +0 2>/dev/null | xargs grep -l '^==[[:digit:]]*==ERROR:' | xargs -I{} -n1 -t asan_symbolize -l{}
+    - for f in $(grep -l '#[[:digit:]]* *0x[[:digit:]a-fA-F]*' "$LOG_DIR"/*); do asan_symbolize-11 -l "$f"; done
 
 branches:
   except:
     - /^v[0-9]/
 
 script:
+  - mkdir -p "$LOG_DIR"
   - NPROC=$(getconf _NPROCESSORS_ONLN)
   - set -o errexit
   - echo -e "\\033[33;1mConfiguring Vim\\033[0m" && echo -en "travis_fold:start:configure\\r\\033[0K"
@@ -125,7 +136,12 @@ script:
       # Append various warning flags to CFLAGS.
       # BSD sed needs backup extension specified.
       sed -i.bak -f ci/config.mk.sed ${SRCDIR}/auto/config.mk
-      sed -i.bak -f ci/config.mk.${CC}.sed ${SRCDIR}/auto/config.mk
+      if [[ "${TRAVIS_OS_NAME}" = "osx" ]] || [[ "${CC}" = "clang-11" ]]; then
+        # On macOS, the entity of gcc is clang.
+        sed -i.bak -f ci/config.mk.clang.sed ${SRCDIR}/auto/config.mk
+      else
+        sed -i.bak -f ci/config.mk.${CC}.sed ${SRCDIR}/auto/config.mk
+      fi
       make ${SHADOWOPT} -j${NPROC}
     fi
   - echo -en "travis_fold:end:build\\r\\033[0K"
@@ -140,12 +156,20 @@ script:
   - echo -e "\\033[33;1mTesting Vim\\033[0m" && echo -en "travis_fold:start:test\\r\\033[0K"
   - do_test make ${SHADOWOPT} ${TEST} && FOLD_MARKER=travis_fold
   - echo -en "${FOLD_MARKER}:end:test\\r\\033[0K"
+  - |
+    # Not all sanitizers will cause the tests to fail.  This helps since we can
+    # see all the failures instead of just the first one, but we still want the
+    # test phase to fail if any sanitizer issues are detected.
+    if [[ -n "${ASAN_OPTIONS}" ]]; then
+      if grep -q '#[[:digit:]]* *0x[[:digit:]a-fA-F]*' "$LOG_DIR"/*; then
+        false
+      fi
+    fi
 
-
-# instead of a 2*2*8 matrix (2*os + 2*compiler + 8*env),
-# exclude some builds on mac os x and linux
-# on mac os x "tiny" is always without GUI
-# linux: 2*compiler + 5*env + mac: 2*compiler + 2*env
+# Instead of using all environments with both compilers on both systems,
+# exclude some builds on mac os x and linux.
+# On mac os x "tiny" is always without GUI, use 2 compilers in 2 environments.
+# Linux: 2 compilers on some of the environments + gcc on os390
 jobs:
   include:
     - <<: *osx
@@ -187,13 +211,13 @@ jobs:
       compiler: gcc
       env: *small
     - <<: *linux
-      name: normal/clang
+      name: normal+shadow/clang
       compiler: clang
       env:
         - *normal
         - *shadowopt
     - <<: *linux
-      name: normal/gcc
+      name: normal+shadow/gcc
       compiler: gcc
       env:
         - *normal
@@ -204,22 +228,39 @@ jobs:
       compiler: gcc
       env: *linux-huge
       services: []
+    - <<: *linux
+      arch: arm64
+      name: huge/gcc-arm64
+      compiler: gcc
+      env: *linux-huge
+      services: []
     - <<: *linux
       name: huge+coverage/clang
       compiler: clang
       env:
         - *linux-huge
+        - *coverage
         # Clang cannot compile test_libvterm with "--coverage" flag.
         - TEST=scripttests
-      after_success: *coverage
+      after_success: *eval-coverage
     - <<: *linux
       name: huge+coverage/gcc
       compiler: gcc
-      env: *linux-huge
-      after_success: *coverage
+      env:
+        - *linux-huge
+        - *coverage
+      after_success: *eval-coverage
     - <<: *linux # ASAN
-      name: huge+asan/gcc
-      compiler: gcc
+      name: huge+asan/clang
+      compiler: clang-11
+      addons:
+        apt:
+          sources:
+            - sourceline: 'deb http://apt.llvm.org/bionic/ llvm-toolchain-bionic-11 main'
+              key_url: 'https://apt.llvm.org/llvm-snapshot.gpg.key'
+          packages:
+            - *apt-packages
+            - clang-11
       env:
         - *linux-huge
         - *asan
@@ -229,13 +270,16 @@ jobs:
       compiler: gcc
       env:
         - *linux-huge
+        - *coverage
         - TEST="-C src testgui"
-      after_success: *coverage
+      after_success: *eval-coverage
     - <<: *linux
       name: unittests+coverage/gcc
       compiler: gcc
-      env: *unittests
-      after_success: *coverage
+      env:
+        - *unittests
+        - *coverage
+      after_success: *eval-coverage
     - <<: *linux
       name: vimtags/gcc
       compiler: gcc

Filelist

@@ -9,6 +9,8 @@ SRC_ALL =	\
 		.lgtm.yml \
 		.travis.yml \
 		.cirrus.yml \
+		.github/workflows/ci-windows.yaml \
+		.github/CODEOWNERS \
 		appveyor.yml \
 		ci/appveyor.bat \
 		ci/if_ver*.vim \
@@ -44,6 +46,7 @@ SRC_ALL =	\
 		src/drawline.c \
 		src/drawscreen.c \
 		src/edit.c \
+		src/errors.h \
 		src/eval.c \
 		src/evalbuffer.c \
 		src/evalfunc.c \
@@ -68,18 +71,22 @@ SRC_ALL =	\
 		src/gui_beval.c \
 		src/hardcopy.c \
 		src/hashtab.c \
+		src/help.c \
 		src/highlight.c \
 		src/indent.c \
 		src/insexpand.c \
+		src/job.c \
 		src/json.c \
 		src/json_test.c \
 		src/kword_test.c \
 		src/list.c \
+		src/locale.c \
 		src/keymap.h \
 		src/macros.h \
 		src/main.c \
 		src/map.c \
 		src/mark.c \
+		src/match.c \
 		src/mbyte.c \
 		src/memfile.c \
 		src/memfile_test.c \
@@ -133,6 +140,7 @@ SRC_ALL =	\
 		src/textobject.c \
 		src/textprop.c \
 		src/time.c \
+		src/typval.c \
 		src/ui.c \
 		src/undo.c \
 		src/usercmd.c \
@@ -144,6 +152,7 @@ SRC_ALL =	\
 		src/vim9compile.c \
 		src/vim9execute.c \
 		src/vim9script.c \
+		src/vim9type.c \
 		src/viminfo.c \
 		src/winclip.c \
 		src/window.c \
@@ -156,6 +165,7 @@ SRC_ALL =	\
 		src/testdir/*.py \
 		src/testdir/lsan-suppress.txt \
 		src/testdir/sautest/autoload/*.vim \
+		src/testdir/testluaplugin/lua/testluaplugin/*.lua \
 		src/testdir/check.vim \
 		src/testdir/gui_init.vim \
 		src/testdir/gui_preinit.vim \
@@ -166,12 +176,12 @@ SRC_ALL =	\
 		src/testdir/setup_gui.vim \
 		src/testdir/shared.vim \
 		src/testdir/vim9.vim \
+		src/testdir/script_util.vim \
 		src/testdir/summarize.vim \
 		src/testdir/term_util.vim \
 		src/testdir/view_util.vim \
 		src/testdir/test[0-9]*.ok \
-		src/testdir/test[0-9]*a.ok \
-		src/testdir/test49.vim \
+		src/testdir/test77a.ok \
 		src/testdir/test83-tags? \
 		src/testdir/test77a.com \
 		src/testdir/test_*.vim \
@@ -237,14 +247,18 @@ SRC_ALL =	\
 		src/proto/gui_beval.pro \
 		src/proto/hardcopy.pro \
 		src/proto/hashtab.pro \
+		src/proto/help.pro \
 		src/proto/highlight.pro \
 		src/proto/indent.pro \
 		src/proto/insexpand.pro \
+		src/proto/job.pro \
 		src/proto/json.pro \
 		src/proto/list.pro \
+		src/proto/locale.pro \
 		src/proto/main.pro \
 		src/proto/map.pro \
 		src/proto/mark.pro \
+		src/proto/match.pro \
 		src/proto/mbyte.pro \
 		src/proto/memfile.pro \
 		src/proto/memline.pro \
@@ -285,6 +299,7 @@ SRC_ALL =	\
 		src/proto/textobject.pro \
 		src/proto/textprop.pro \
 		src/proto/time.pro \
+		src/proto/typval.pro \
 		src/proto/ui.pro \
 		src/proto/undo.pro \
 		src/proto/usercmd.pro \
@@ -293,6 +308,7 @@ SRC_ALL =	\
 		src/proto/vim9compile.pro \
 		src/proto/vim9execute.pro \
 		src/proto/vim9script.pro \
+		src/proto/vim9type.pro \
 		src/proto/viminfo.pro \
 		src/proto/winclip.pro \
 		src/proto/window.pro \
@@ -301,10 +317,12 @@ SRC_ALL =	\
 		src/libvterm/LICENSE \
 		src/libvterm/Makefile \
 		src/libvterm/README \
+		src/libvterm/CONTRIBUTING \
 		src/libvterm/tbl2inc_c.pl \
 		src/libvterm/vterm.pc.in \
 		src/libvterm/doc/URLs \
 		src/libvterm/doc/seqs.txt \
+		src/libvterm/find-wide-chars.pl \
 		src/libvterm/include/vterm.h \
 		src/libvterm/include/vterm_keycodes.h \
 		src/libvterm/src/encoding.c \
@@ -312,6 +330,7 @@ SRC_ALL =	\
 		src/libvterm/src/encoding/DECdrawing.tbl \
 		src/libvterm/src/encoding/uk.inc \
 		src/libvterm/src/encoding/uk.tbl \
+		src/libvterm/src/fullwidth.inc \
 		src/libvterm/src/keyboard.c \
 		src/libvterm/src/mouse.c \
 		src/libvterm/src/parser.c \
@@ -342,16 +361,18 @@ SRC_ALL =	\
 		src/libvterm/t/27state_reset.test \
 		src/libvterm/t/28state_dbl_wh.test \
 		src/libvterm/t/29state_fallback.test \
-		src/libvterm/t/30pen.test \
-		src/libvterm/t/40screen_ascii.test \
-		src/libvterm/t/41screen_unicode.test \
-		src/libvterm/t/42screen_damage.test \
-		src/libvterm/t/43screen_resize.test \
-		src/libvterm/t/44screen_pen.test \
-		src/libvterm/t/45screen_protect.test \
-		src/libvterm/t/46screen_extent.test \
-		src/libvterm/t/47screen_dbl_wh.test \
-		src/libvterm/t/48screen_termprops.test \
+		src/libvterm/t/30state_pen.test \
+		src/libvterm/t/31state_rep.test \
+		src/libvterm/t/32state_flow.test \
+		src/libvterm/t/60screen_ascii.test \
+		src/libvterm/t/61screen_unicode.test \
+		src/libvterm/t/62screen_damage.test \
+		src/libvterm/t/63screen_resize.test \
+		src/libvterm/t/64screen_pen.test \
+		src/libvterm/t/65screen_protect.test \
+		src/libvterm/t/66screen_extent.test \
+		src/libvterm/t/67screen_dbl_wh.test \
+		src/libvterm/t/68screen_termprops.test \
 		src/libvterm/t/90vttest_01-movement-1.test \
 		src/libvterm/t/90vttest_01-movement-2.test \
 		src/libvterm/t/90vttest_01-movement-3.test \
@@ -411,6 +432,7 @@ SRC_UNIX =	\
 		src/gui_gtk_x11.c \
 		src/gui_gtk_res.xml \
 		src/gui_motif.c \
+		src/gui_xim.c \
 		src/gui_xmdlg.c \
 		src/gui_xmebw.c \
 		src/gui_xmebw.h \
@@ -434,6 +456,7 @@ SRC_UNIX =	\
 		src/proto/gui_gtk_x11.pro \
 		src/proto/gui_gtk_gresources.pro \
 		src/proto/gui_motif.pro \
+		src/proto/gui_xim.pro \
 		src/proto/gui_xmdlg.pro \
 		src/proto/gui_x11.pro \
 		src/proto/if_xcmdsrv.pro \
@@ -600,7 +623,7 @@ SRC_AMI =	\
 		README_amisrc.txt.info \
 		src.info \
 		src/INSTALLami.txt \
-		src/Make_morph.mak \
+		src/Make_ami.mak \
 		src/os_amiga.c \
 		src/os_amiga.h \
 		src/proto/os_amiga.pro \
@@ -621,13 +644,11 @@ SRC_HAIKU =	\
 SRC_MAC =	\
 		src/INSTALLmac.txt \
 		src/dehqx.py \
-		src/gui_mac.c \
 		src/os_mac_rsrc/*.icns \
 		src/os_mac.h \
 		src/os_mac.rsr.hqx \
 		src/os_mac_conv.c \
 		src/os_macosx.m \
-		src/proto/gui_mac.pro \
 		src/proto/os_mac_conv.pro \
 
 # source files for VMS (in the extra archive)
@@ -663,14 +684,8 @@ SRC_EXTRA =	\
 		$(SRC_QNX) \
 		$(SRC_VMS) \
 		README_os390.txt \
-		src/Make_mint.mak \
 		src/infplist.xml \
 		src/link.390 \
-		src/os_beos.c \
-		src/os_beos.h \
-		src/os_beos.rsrc \
-		src/proto/os_beos.pro \
-		src/os_mint.h \
 		src/os_vms_fix.com \
 		src/toolbar.phi \
 
@@ -966,6 +981,8 @@ LANG_GEN = \
 		runtime/doc/*-pl.UTF-8.1 \
 		runtime/doc/*-ru.1 \
 		runtime/doc/*-ru.UTF-8.1 \
+		runtime/doc/*-tr.1 \
+		runtime/doc/*-tr.UTF-8.1 \
 		runtime/lang/README.txt \
 		runtime/lang/menu_*.vim \
 		runtime/keymap/README.txt \
@@ -1014,6 +1031,8 @@ LANG_SRC = \
 		src/po/README_mvc.txt \
 		src/po/check.vim \
 		src/po/cleanup.vim \
+		src/po/tojavascript.vim \
+		src/po/fixfilenames.vim \
 		src/po/Makefile \
 		src/po/Make_all.mak \
 		src/po/Make_cyg.mak \

Makefile

@@ -32,7 +32,7 @@ first:
 
 # Some make programs use the last target for the $@ default; put the other
 # targets separately to always let $@ expand to "first" by default.
-all install uninstall tools config configure reconfig proto depend lint tags types test scripttests test_libvterm unittests testclean clean distclean:
+all install uninstall tools config configure reconfig proto depend lint tags types test scripttests testtiny test_libvterm unittests testclean clean distclean:
 	@if test ! -f src/auto/config.mk; then \
 		cp src/config.mk.dist src/auto/config.mk; \
 	fi

README.md

@@ -2,6 +2,7 @@
 
 [![Travis Build Status](https://travis-ci.org/vim/vim.svg?branch=master)](https://travis-ci.org/vim/vim)
 [![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim)
+[![Github Build status](https://github.com/vim/vim/workflows/GitHub%20CI/badge.svg)](https://github.com/vim/vim/actions?query=workflow%3A%22GitHub+CI%22)
 [![Cirrus Build Status](https://api.cirrus-ci.com/github/vim/vim.svg)](https://cirrus-ci.com/github/vim/vim)
 [![Coverage Status](https://codecov.io/gh/vim/vim/coverage.svg?branch=master)](https://codecov.io/gh/vim/vim?branch=master)
 [![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim)

README_VIM9.md

@@ -5,8 +5,8 @@
 This is an experimental side of [Vim](https://github.com/vim/vim).
 It explores ways of making Vim script faster and better.
 
-WARNING: The Vim9 script features are in the early stages of development,
-anything can break!
+WARNING: The Vim9 script features are still under development, anything can
+break!
 
 # Why Vim9?
 
@@ -52,7 +52,7 @@ we can gain, and also that Vim script can be faster than builtin
 interfaces.
 
 In practice the script would not do something useless as counting but change
-the text.  For example, re-indent all the lines:
+the text.  For example, reindent all the lines:
 
 ``` vim
   let totallen = 0
@@ -91,14 +91,14 @@ Instead of using script language support in Vim:
   with them.  The job and channel support already makes this possible.
   Really any language can be used, also Java and Go, which are not
   available built-in.
-* Phase out the built-in language interfaces, make maintenance a bit easier
-  and executables easier to build.  They will be kept for backwards
-  compatibility, no new features.
+* No priority for the built-in language interfaces.  They will have to be kept
+  for backwards compatibility, but many users won't need a Vim build with these
+  interfaces.
 * Improve the Vim script language, it is used to communicate with the external
   tool and implements the Vim side of the interface.  Also, it can be used when
   an external tool is undesired.
 
-All together this creates a clear situation: Vim with the +eval feature
+Altogether this creates a clear situation: Vim with the +eval feature
 will be sufficient for most plugins, while some plugins require
 installing a tool that can be written in any language.  No confusion
 about having Vim but the plugin not working because some specific
@@ -140,6 +140,9 @@ Taking this one step further is also dropping "s:" for script-local variables;
 everything at the script level is script-local by default.  Since this is not
 backwards compatible it requires a new script style: Vim9 script!
 
+To avoid having more variations, the syntax inside a compiled function is the
+same as in Vim9 script.  Thus you have legacy syntax and Vim9 syntax.
+
 It should be possible to convert code from other languages to Vim
 script.  We can add functionality to make this easier.  This still needs
 to be discussed, but we can consider adding type checking and a simple

READMEdir/README_extra.txt

@@ -13,17 +13,11 @@ src/if_sniff.*		Interface to SNiFF.  If you don't know what SNiFF is,
 
 src/os_amiga.*		Files for the Amiga port.
 
-src/gui_beos.*
-src/os_beos.*		Files for the BeOS port.
-
 src/os_msdos.*
 src/os_dos.*		Files for the MS-DOS port.
 
-src/gui_mac.*
 src/os_mac.*		Files for the Mac port.
 
-src/os_mint.8		Files for the Atari Mint port.
-
 src/os_vms*		Files for the VMS port.
 
 src/os_w32*

appveyor.yml

@@ -5,16 +5,17 @@ skip_tags: true
 environment:
   matrix:
     - FEATURE: HUGE
-    - FEATURE: NORMAL
 # disabled
 #    - FEATURE: TINY
 #    - FEATURE: SMALL
+#    - FEATURE: NORMAL
 #    - FEATURE: BIG
 
 matrix:
   fast_finish: true
 
 before_build:
+  # Use Windows SDK 7.1 (= MSVC 2010)
   - '"C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd" /x64 /release'
   - 'set INCLUDE=%INCLUDE%C:\Program Files (x86)\Windows Kits\8.1\Include\um'
 
@@ -25,9 +26,9 @@ test_script:
   - cd src/testdir
     # Testing with MSVC gvim
   - path C:\Python35-x64;%PATH%
-  - nmake -f Make_dos.mak POSTSCRIPT=yes VIMPROG=..\gvim
+  - nmake -f Make_dos.mak VIMPROG=..\gvim
   - nmake -f Make_dos.mak clean
-    # Testing with MingW console version
-  - nmake -f Make_dos.mak POSTSCRIPT=yes VIMPROG=..\vim
+    # Testing with MSVC console version
+  - nmake -f Make_dos.mak VIMPROG=..\vim
 
 # vim: sw=2 sts=2 et ts=8 sr

ci/appveyor.bat

@@ -5,44 +5,32 @@ setlocal ENABLEDELAYEDEXPANSION
 cd %APPVEYOR_BUILD_FOLDER%
 
 cd src
-echo "Building MinGW 32bit console version"
-set PATH=c:\msys64\mingw32\bin;%PATH%
-mingw32-make.exe -f Make_ming.mak GUI=no OPTIMIZE=speed IME=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
-:: Save vim.exe before Make clean, moved back below.
-copy vim.exe testdir
-mingw32-make.exe -f Make_ming.mak clean
-
-:: Build Mingw huge version with python and channel support, or
-:: with specified features without python.
-echo "Building MinGW 32bit GUI version"
-if "%FEATURE%" == "HUGE" (
-    mingw32-make.exe -f Make_ming.mak OPTIMIZE=speed CHANNEL=yes GUI=yes IME=yes ICONV=yes DEBUG=no PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27 PYTHON3_VER=35 DYNAMIC_PYTHON3=yes PYTHON3=C:\Python35 FEATURES=%FEATURE% || exit 1
-) ELSE (
-    mingw32-make.exe -f Make_ming.mak OPTIMIZE=speed GUI=yes IME=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
-)
-.\gvim -u NONE -c "redir @a | ver |0put a | wq" ver_ming.txt
-
 :: Filter out the progress bar from the build log
 sed -e "s/@<<$/@<< | sed -e 's#.*\\\\r.*##'/" Make_mvc.mak > Make_mvc2.mak
 
 echo "Building MSVC 64bit console Version"
-nmake -f Make_mvc2.mak CPU=AMD64 OLE=no GUI=no IME=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
-nmake -f Make_mvc2.mak clean
+nmake -f Make_mvc2.mak CPU=AMD64 ^
+    OLE=no GUI=no IME=yes ICONV=yes DEBUG=no ^
+    FEATURES=%FEATURE% || exit 1
 
 :: build MSVC huge version with python and channel support
 :: GUI needs to be last, so that testing works
 echo "Building MSVC 64bit GUI Version"
 if "%FEATURE%" == "HUGE" (
-    nmake -f Make_mvc2.mak DIRECTX=yes CPU=AMD64 CHANNEL=yes OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27-x64 PYTHON3_VER=35 DYNAMIC_PYTHON3=yes PYTHON3=C:\Python35-x64 FEATURES=%FEATURE% || exit 1
+    nmake -f Make_mvc2.mak CPU=AMD64 ^
+        OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no POSTSCRIPT=yes ^
+        PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27-x64 ^
+        PYTHON3_VER=35 DYNAMIC_PYTHON3=yes PYTHON3=C:\Python35-x64 ^
+        FEATURES=%FEATURE% || exit 1
 ) ELSE (
-    nmake -f Make_mvc2.mak CPU=AMD64 OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no FEATURES=%FEATURE% || exit 1
+    nmake -f Make_mvc2.mak CPU=AMD64 ^
+        OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no ^
+        FEATURES=%FEATURE% || exit 1
 )
 .\gvim -u NONE -c "redir @a | ver |0put a | wq" ver_msvc.txt
 
-:: Restore vim.exe, tests will run with this.
-move /Y testdir\vim.exe .
-echo "version output MinGW"
-type ver_ming.txt
-echo "version output MVC"
+echo "version output MSVC console"
+.\vim --version
+echo "version output MSVC GUI"
 type ver_msvc.txt
 cd ..

ci/config.mk.clang.sed

@@ -1 +1,2 @@
-/^RUBY_CFLAGS\b/s/$/ -Wno-error=unknown-attributes -Wno-error=ignored-attributes/
+/^CFLAGS[[:blank:]]*=/s/$/ -Wno-error=missing-field-initializers/
+/^RUBY_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=unknown-attributes -Wno-error=ignored-attributes/

ci/config.mk.gcc.sed

@@ -1 +1 @@
-/^CFLAGS\b/s/$/ -Wno-error=maybe-uninitialized/
+/^CFLAGS[[:blank:]]*=/s/$/ -Wno-error=maybe-uninitialized/

ci/config.mk.sed

@@ -1,2 +1,2 @@
-/^CFLAGS\b/s/$/ -Wall -Wextra -Wshadow -Werror/
-/^PERL_CFLAGS\b/s/$/ -Wno-error=unused-function/
+/^CFLAGS[[:blank:]]*=/s/$/ -Wall -Wextra -Wshadow -Werror/
+/^PERL_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=unused-function/

ci/load-snd-dummy.sh

@@ -3,6 +3,6 @@ set -e
 
 if ! modprobe snd-dummy; then
     # snd-dummy is contained in linux-modules-extra (if exists)
-    apt install -y "linux-modules-extra-$(uname -r)"
+    apt-get install -yq --no-install-suggests --no-install-recommends "linux-modules-extra-$(uname -r)"
     modprobe snd-dummy
 fi

nsis/gvim.nsi

@@ -174,6 +174,7 @@ Page custom SetCustom ValidateCustom
     !include "lang\german.nsi"
     !include "lang\italian.nsi"
     !include "lang\japanese.nsi"
+    !include "lang\russian.nsi"
     !include "lang\simpchinese.nsi"
     !include "lang\tradchinese.nsi"
     !include "lang\turkish.nsi"
@@ -687,6 +688,15 @@ SectionEnd
 	${EndIf}
 !macroend
 
+!macro LoadDefaultVimrc out_var reg_value default_value
+	ClearErrors
+	ReadRegStr ${out_var} HKLM "${UNINST_REG_KEY_VIM}" ${reg_value}
+	${If} ${Errors}
+	${OrIf} ${out_var} == ""
+	  StrCpy ${out_var} ${default_value}
+	${EndIf}
+!macroend
+
 Function .onInit
 !ifdef HAVE_MULTI_LANG
   # Select a language (or read from the registry).
@@ -718,10 +728,10 @@ Function .onInit
 !endif
   ${EndIf}
 
-# Load the selections from the registry (if any).
   ${If} ${RunningX64}
     SetRegView 64
   ${EndIf}
+  # Load the selections from the registry (if any).
   !insertmacro LoadSectionSelection ${id_section_console}    "select_console"
   !insertmacro LoadSectionSelection ${id_section_batch}      "select_batch"
   !insertmacro LoadSectionSelection ${id_section_desktop}    "select_desktop"
@@ -736,6 +746,10 @@ Function .onInit
 !ifdef HAVE_NLS
   !insertmacro LoadSectionSelection ${id_section_nls}        "select_nls"
 !endif
+  # Load the default _vimrc settings from the registry (if any).
+  !insertmacro LoadDefaultVimrc $vim_compat_stat "vim_compat" "all"
+  !insertmacro LoadDefaultVimrc $vim_keymap_stat "vim_keyremap" "default"
+  !insertmacro LoadDefaultVimrc $vim_mouse_stat "vim_mouse" "default"
   ${If} ${RunningX64}
     SetRegView lastused
   ${EndIf}
@@ -799,17 +813,11 @@ Function SetCustom
 	${NSD_CB_AddString} $vim_nsd_compat $(str_msg_compat_defaults)
 	${NSD_CB_AddString} $vim_nsd_compat $(str_msg_compat_all)
 
-	# Default selection
-	${If} $vim_compat_stat == ""
-	  ReadRegStr $3 HKLM "${UNINST_REG_KEY_VIM}" "vim_compat"
-	${Else}
-	  StrCpy $3 $vim_compat_stat
-	${EndIf}
-	${If} $3 == "defaults"
+	${If} $vim_compat_stat == "defaults"
 	  StrCpy $4 2
-	${ElseIf} $3 == "vim"
+	${ElseIf} $vim_compat_stat == "vim"
 	  StrCpy $4 1
-	${ElseIf} $3 == "vi"
+	${ElseIf} $vim_compat_stat == "vi"
 	  StrCpy $4 0
 	${Else} # default
 	  StrCpy $4 3
@@ -828,13 +836,7 @@ Function SetCustom
 	${NSD_CB_AddString} $vim_nsd_keymap $(str_msg_keymap_default)
 	${NSD_CB_AddString} $vim_nsd_keymap $(str_msg_keymap_windows)
 
-	# Default selection
-	${If} $vim_keymap_stat == ""
-	  ReadRegStr $3 HKLM "${UNINST_REG_KEY_VIM}" "vim_keyremap"
-	${Else}
-	  StrCpy $3 $vim_keymap_stat
-	${EndIf}
-	${If} $3 == "windows"
+	${If} $vim_keymap_stat == "windows"
 	  StrCpy $4 1
 	${Else} # default
 	  StrCpy $4 0
@@ -854,15 +856,9 @@ Function SetCustom
 	${NSD_CB_AddString} $vim_nsd_mouse $(str_msg_mouse_windows)
 	${NSD_CB_AddString} $vim_nsd_mouse $(str_msg_mouse_unix)
 
-	# Default selection
-	${If} $vim_mouse_stat == ""
-	  ReadRegStr $3 HKLM "${UNINST_REG_KEY_VIM}" "vim_mouse"
-	${Else}
-	  StrCpy $3 $vim_mouse_stat
-	${EndIf}
-	${If} $3 == "xterm"
+	${If} $vim_mouse_stat == "xterm"
 	  StrCpy $4 2
-	${ElseIf} $3 == "windows"
+	${ElseIf} $vim_mouse_stat == "windows"
 	  StrCpy $4 1
 	${Else} # default
 	  StrCpy $4 0

nsis/lang/italian.nsi

@@ -58,10 +58,10 @@ LangString str_desc_console         ${LANG_ITALIAN} \
     "Versione console di Vim (vim.exe)."
 
 LangString str_section_batch        ${LANG_ITALIAN} \
-    "Crea file di invocazione (MS-DOS) .bat"
+    "Crea file .bat"
 LangString str_desc_batch           ${LANG_ITALIAN} \
-    "Crea file di invocazione .bat per varianti di Vim nella directory \
-     di Windows, per utilizzo da linea di comando (MS-DOS)."
+    "Crea file .bat per varianti di Vim nella directory \
+     di Windows, per utilizzo da riga di comando."
 
 LangString str_group_icons          ${LANG_ITALIAN} \
     "Crea icone per Vim"

nsis/lang/russian.nsi

@@ -0,0 +1,287 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# russian.nsi: Russian language strings for gvim NSIS installer.
+#
+# Locale ID    : 1049
+# Locale name  : ru-RU
+# fileencoding : UTF-8
+# Author       : Restorer
+
+!insertmacro MUI_LANGUAGE "Russian"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_RUSSIAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_RUSSIAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_RUSSIAN} \
+#    "Маршрут к каталогу установки (должен оканчиваться каталогом $\"vim$\")"
+
+LangString str_show_readme          ${LANG_RUSSIAN} \
+    "После окончания установки ознакомиться с кратким описанием"
+
+# Install types:
+LangString str_type_typical         ${LANG_RUSSIAN} \
+    "Стандартная"
+
+LangString str_type_minimal         ${LANG_RUSSIAN} \
+    "Минимальная"
+
+LangString str_type_full            ${LANG_RUSSIAN} \
+    "Полная"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_RUSSIAN} \
+    "Удаление предыдущих версий"
+LangString str_desc_old_ver         ${LANG_RUSSIAN} \
+    "Будут удалены предыдущие установленные версии программы"
+
+LangString str_section_exe          ${LANG_RUSSIAN} \
+    "Графический интерфейс и вспомогательные файлы"
+LangString str_desc_exe             ${LANG_RUSSIAN} \
+    "Графический интерфейс программы Vim и все необходимые для этого файлы. \
+    Это обязательный компонент"
+
+LangString str_section_console      ${LANG_RUSSIAN} \
+    "Консольная программа Vim"
+LangString str_desc_console         ${LANG_RUSSIAN} \
+    "Вариант редактора Vim (vim.exe), используемый в командной оболочке"
+
+LangString str_section_batch        ${LANG_RUSSIAN} \
+    "Создать командные файлы"
+LangString str_desc_batch           ${LANG_RUSSIAN} \
+    "Создание командных bat-файлов позволяющих работать с редактором \
+     Vim из командной строки Windows"
+
+LangString str_group_icons          ${LANG_RUSSIAN} \
+    "Создать ярлыки для редактора Vim"
+LangString str_desc_icons           ${LANG_RUSSIAN} \
+    "Создание ярлыков редактора Vim для облегчения запуска программы"
+
+LangString str_section_desktop      ${LANG_RUSSIAN} \
+    "На Рабочем столе"
+LangString str_desc_desktop         ${LANG_RUSSIAN} \
+    "Создание ярлыков программы Gvim на Рабочем столе"
+
+LangString str_section_start_menu   ${LANG_RUSSIAN} \
+    "В меню кнопки Пуск"
+LangString str_desc_start_menu      ${LANG_RUSSIAN} \
+    "Создание ярлыков программы Gvim в меню кнопки Пуск"
+
+#LangString str_section_quick_launch ${LANG_RUSSIAN} \
+#    "На панели быстрого запуска"
+#LangString str_desc_quick_launch    ${LANG_RUSSIAN} \
+#    "Создание ярлыков программы GVim на панели быстрого запуска"
+
+LangString str_section_edit_with    ${LANG_RUSSIAN} \
+    "В контекстном меню"
+LangString str_desc_edit_with       ${LANG_RUSSIAN} \
+    "Добавление вызова программы Gvim в пункт $\"Открыть с помощью...$\" контекстного меню"
+
+#LangString str_section_edit_with32  ${LANG_RUSSIAN} \
+#    "32-разрядная версия программы"
+#LangString str_desc_edit_with32     ${LANG_RUSSIAN} \
+#    "Добавление вызова программы Gvim в пункт $\"Открыть с помощью...$\" контекстного меню \
+#     для 32-разрядных приложений"
+
+#LangString str_section_edit_with64  ${LANG_RUSSIAN} \
+#    "64-разрядная версия программы"
+#LangString str_desc_edit_with64     ${LANG_RUSSIAN} \
+#    "Добавление вызова программы Gvim в пункт $\"Открыть с помощью...$\" контекстного меню \
+#     для 64-разрядных приложений"
+
+LangString str_section_vim_rc       ${LANG_RUSSIAN} \
+    "Настройки программы по умолчанию"
+LangString str_desc_vim_rc          ${LANG_RUSSIAN} \
+    "Создание файла _vimrc с предустановленными настройками, если нет других \
+    файлов настроек"
+
+LangString str_group_plugin         ${LANG_RUSSIAN} \
+    "Создать каталог для подключаемых модулей"
+LangString str_desc_plugin          ${LANG_RUSSIAN} \
+    "Создание каталога для размещения подключаемых модулей, которые расширяют \
+     возможности редактора Vim"
+
+LangString str_section_plugin_home  ${LANG_RUSSIAN} \
+    "Личный каталог"
+LangString str_desc_plugin_home     ${LANG_RUSSIAN} \
+    "Создание каталога для подключаемых модулей в домашнем каталоге пользователя"
+
+LangString str_section_plugin_vim   ${LANG_RUSSIAN} \
+    "Общий каталог"
+LangString str_desc_plugin_vim      ${LANG_RUSSIAN} \
+    "Создание каталога для подключаемых модулей в каталоге установки редактора Vim. \
+     Модули в этом каталоге будут доступны для любого пользователя \
+     зарегистрировавшегося в системе"
+
+LangString str_section_vis_vim      ${LANG_RUSSIAN} \
+    "Подключаемый модуль VisVim"
+LangString str_desc_vis_vim         ${LANG_RUSSIAN} \
+    "Подключаемый модуль VisVim используется для интеграции с Microsoft Visual Studio"
+
+LangString str_section_nls          ${LANG_RUSSIAN} \
+    "Поддержка региональных языков"
+LangString str_desc_nls             ${LANG_RUSSIAN} \
+    "Установка файлов для поддержки региональных языков операционной системы"
+
+LangString str_unsection_register   ${LANG_RUSSIAN} \
+    "Отменить регистрацию компонентов программы Vim"
+LangString str_desc_unregister      ${LANG_RUSSIAN} \
+    "Отмена регистрации компонентов программы Vim в операционной системе"
+
+LangString str_unsection_exe        ${LANG_RUSSIAN} \
+    "Удалить файлы редактора Vim"
+LangString str_desc_rm_exe          ${LANG_RUSSIAN} \
+    "Удаление всех исполняемых и вспомогательных файлов редактора Vim"
+
+LangString str_ungroup_plugin       ${LANG_RUSSIAN} \
+    "Удалить каталог подключаемых модулей"
+LangString str_desc_rm_plugin       ${LANG_RUSSIAN} \
+    "Удаление каталога подключаемых модулей, если в нём нет файлов"
+
+LangString str_unsection_plugin_home ${LANG_RUSSIAN} \
+    "Личный каталог"
+LangString str_desc_rm_plugin_home  ${LANG_RUSSIAN} \
+    "Удаление каталога подключаемых модулей из домашнего каталога пользователя"
+
+LangString str_unsection_plugin_vim ${LANG_RUSSIAN} \
+    "Общий каталог"
+LangString str_desc_rm_plugin_vim   ${LANG_RUSSIAN} \
+    "Удаление каталога подключаемых модулей из каталога установки редактора Vim"
+
+LangString str_unsection_rootdir    ${LANG_RUSSIAN} \
+    "Удалить основной каталог программы Vim"
+LangString str_desc_rm_rootdir      ${LANG_RUSSIAN} \
+    "Удаление основного каталога программы Vim. В этом каталоге находятся файлы \
+    настроек!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_RUSSIAN} \
+#    "Обнаружено предыдущих версий программы Vim: $vim_old_ver_count.$\r$\n\
+#     Данная программа установки может удалить не более ${VIM_MAX_OLD_VER}.$\r$\n\
+#     Удалить лишние версии программы Vim и повторите установку"
+
+#LangString str_msg_invalid_root  ${LANG_RUSSIAN} \
+#    "Недопустимый каталог установки программы Vim $vim_install_root!$\r$\n\
+#     Маршрут установки должен оканчиваться каталогом $\"vim$\""
+
+#LangString str_msg_bin_mismatch  ${LANG_RUSSIAN} \
+#    "Недопустимый маршрут к каталогу с исполняемыми файлами!$\r$\n$\r$\n\
+#     Маршрут к каталогу с исполняемыми файлами должен быть $\"$vim_bin_path$\",$\r$\n\
+#     но от операционной системы получен как $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_RUSSIAN} \
+#    "Программа Vim сейчас работает.$\r$\n\
+#     Прежде чем продолжить, закройте все работающие редакторы Vim"
+
+#LangString str_msg_register_ole  ${LANG_RUSSIAN} \
+#    "Попытка зарегистрировать компоненты программы Vim в пространстве OLE. \
+#     Но не получено уведомление об успешности данной операции"
+
+#LangString str_msg_unreg_ole     ${LANG_RUSSIAN} \
+#    "Попытка отменить регистрацию компонентов программы Vim в пространстве OLE. \
+#     Но не получено уведомление об успешности данной операции"
+
+#LangString str_msg_rm_start      ${LANG_RUSSIAN} \
+#    "Выполняется удаление следующих версий программы:"
+
+#LangString str_msg_rm_fail       ${LANG_RUSSIAN} \
+#    "Произошёл сбой при выполнении удаления следующих версий программы:"
+
+#LangString str_msg_no_rm_key     ${LANG_RUSSIAN} \
+#    "Не удалось найти раздел реестра, содержащий информацию об удалении программы"
+
+#LangString str_msg_no_rm_reg     ${LANG_RUSSIAN} \
+#    "Не удалось найти программу выполняющую удаление, указанную в разделе реестра"
+
+#LangString str_msg_no_rm_exe     ${LANG_RUSSIAN} \
+#    "Отсутствуют права на доступ к программе, выполняющей удаление"
+
+#LangString str_msg_rm_copy_fail  ${LANG_RUSSIAN} \
+#    "Произошла ошибка при копировании программы удаления во временный каталог"
+
+#LangString str_msg_rm_run_fail   ${LANG_RUSSIAN} \
+#    "Произошёл сбой при запуске программы, выполняющей удаление"
+
+#LangString str_msg_abort_install ${LANG_RUSSIAN} \
+#    "Установка программы была отменена"
+
+LangString str_msg_install_fail  ${LANG_RUSSIAN} \
+    "Произошла ошибка при установке программы. Попробуйте повторить установку \
+    немного попозже"
+# когда луна будет в другой фазе и ветер должен дуть с юго‐запада
+
+LangString str_msg_rm_exe_fail   ${LANG_RUSSIAN} \
+    "Некоторые файлы не были удалены из каталога $0 $\r$\n\
+     Необходимо выполнить их удаление самостоятельно"
+
+#LangString str_msg_rm_root_fail  ${LANG_RUSSIAN} \
+#    "Внимание! В каталоге $\"$vim_install_root$\" содержатся файлы. Удаление каталога не выполнено"
+
+LangString str_msg_uninstalling  ${LANG_RUSSIAN} \
+    "Удаление предыдущих версий программ..."
+
+LangString str_msg_registering   ${LANG_RUSSIAN} \
+    "Регистрация компонентов программы в системе..."
+
+LangString str_msg_unregistering ${LANG_RUSSIAN} \
+    "Отмена регистрации компонентов программы в системе..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_RUSSIAN} \
+    "Установка параметров программы"
+LangString str_vimrc_page_subtitle ${LANG_RUSSIAN} \
+    "Параметры, используемые для клавиатуры, «мыши» и функциональности программы"
+
+LangString str_msg_compat_title    ${LANG_RUSSIAN} \
+    " Варианты использования программы "
+LangString str_msg_compat_desc     ${LANG_RUSSIAN} \
+    "Совместимость и функциональность программы"
+LangString str_msg_compat_vi       ${LANG_RUSSIAN} \
+    "Работа в варианте совместимости с редактором Vi"
+LangString str_msg_compat_vim      ${LANG_RUSSIAN} \
+    "Работа в варианте функциональности редактора Vim"
+LangString str_msg_compat_defaults ${LANG_RUSSIAN} \
+    "Работа редактора Vim с некоторыми улучшениями (файл defaults.vim)"
+LangString str_msg_compat_all      ${LANG_RUSSIAN} \
+    "Работа редактора Vim со всеми улучшениями (файл vimrc_example.vim). \
+    Используется по умолчанию"
+
+LangString str_msg_keymap_title   ${LANG_RUSSIAN} \
+    " Клавиатурные команды "
+LangString str_msg_keymap_desc    ${LANG_RUSSIAN} \
+    "Клавиатурные команды используемые в ОС Windows (CTRL+V, CTRL+C, CTRL+S, CTRL+F и т. п.)"
+LangString str_msg_keymap_default ${LANG_RUSSIAN} \
+    "Не изменять клавиатурные команды. Использовать принятые в редакторе Vim"
+LangString str_msg_keymap_windows ${LANG_RUSSIAN} \
+    "Изменить указанные клавиатурные команды"
+
+LangString str_msg_mouse_title   ${LANG_RUSSIAN} \
+    " Манипулятор «мышь» "
+LangString str_msg_mouse_desc    ${LANG_RUSSIAN} \
+    "Действий правой и левой кнопки манипулятора «мышь»"
+LangString str_msg_mouse_default ${LANG_RUSSIAN} \
+    "Правая кнопка — всплывающее меню, левая кнопка — режим визуальный"
+LangString str_msg_mouse_windows ${LANG_RUSSIAN} \
+    "Правая кнопка — всплывающее меню, левая кнопка — режим выборки (как в ОС Windows)"
+LangString str_msg_mouse_unix    ${LANG_RUSSIAN} \
+    "Правая кнопка — расширяемый режим выбора, левая кнопка — режим визуальный (как в UNIX‐подобных ОС)"

runtime/autoload/decada.vim

@@ -25,7 +25,7 @@ function decada#Unit_Name () dict				     " {{{1
     "	Convert filename into acs unit:
     "	    1:  remove the file extenstion.
     "	    2:  replace all double '_' or '-' with an dot (which denotes a separate)
-    "	    3:  remove a trailing '_' (wich denotes a specification)
+    "	    3:  remove a trailing '_' (which denotes a specification)
     return substitute (substitute (expand ("%:t:r"), '__\|-', ".", "g"), '_$', "", '')
 endfunction decada#Unit_Name					     " }}}1
 

runtime/autoload/dist/ft.vim

@@ -1,7 +1,7 @@
 " Vim functions for file type detection
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2020 Mar 30
+" Last Change:	2020 Aug 17
 
 " These functions are moved here from runtime/filetype.vim to make startup
 " faster.
@@ -575,7 +575,7 @@ endfunc
 let s:ft_rules_udev_rules_pattern = '^\s*\cudev_rules\s*=\s*"\([^"]\{-1,}\)/*".*'
 func dist#ft#FTRules()
   let path = expand('<amatch>:p')
-  if path =~ '^/\(etc/udev/\%(rules\.d/\)\=.*\.rules\|lib/udev/\%(rules\.d/\)\=.*\.rules\)$'
+  if path =~ '/\(etc/udev/\%(rules\.d/\)\=.*\.rules\|\%(usr/\)\=lib/udev/\%(rules\.d/\)\=.*\.rules\)$'
     setf udevrules
     return
   endif

runtime/autoload/javascriptcomplete.vim

@@ -1,7 +1,9 @@
 " Vim completion script
 " Language:	Java Script
-" Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change:	2017 Mar 04
+" Maintainer:	Jay Sitter (jay@jaysitter.com)
+" URL: https://github.com/jsit/javascriptcomplete.vim/
+" Previous Maintainer:	Mikolaj Machowski ( mikmach AT wp DOT pl )
+" Last Change:	2020 Jul 30
 
 function! javascriptcomplete#CompleteJS(findstart, base)
   if a:findstart
@@ -154,12 +156,30 @@ function! javascriptcomplete#CompleteJS(findstart, base)
 					\ 'text', 'vLink']
 		let bodys = bodyprop
 		" Document - document.
-		let docuprop = ['anchors', 'applets', 'childNodes', 'embeds', 'forms', 'images', 'links', 'stylesheets',
-					\ 'body', 'cookie', 'documentElement', 'domain', 'lastModified', 'referrer', 'title', 'URL']
-		let documeth = ['close', 'createAttribute', 'createElement', 'createTextNode', 'focus', 'getElementById',
-					\ 'getElementsByName', 'getElementsByTagName', 'open', 'write', 'writeln',
-					\ 'onClick', 'onDblClick', 'onFocus', 'onKeyDown', 'onKeyPress', 'onKeyUp',
-					\ 'onMouseDown', 'onMouseMove', 'onMouseOut', 'onMouseOver', 'onMouseUp', 'onResize']
+		let docuprop = ['anchors', 'body', 'characterSet', 'doctype',
+					\ 'documentElement', 'documentURI', 'embeds', 'fonts', 'forms',
+					\ 'head', 'hidden', 'images', 'implementation', 'lastStyleSheetSet',
+					\ 'links', 'plugins', 'preferredStyleSheetSet', 'scripts',
+					\ 'scrollingElement', 'selectedStyleSheetSet', 'styleSheetSets',
+					\ 'timeline', 'visibilityState', 'cookie', 'defaultView',
+					\ 'designMode', 'dir', 'domain', 'lastModified', 'location',
+					\ 'readyState', 'referrer', 'title', 'URL', 'activeElement',
+					\ 'fullscreenElement', 'styleSheets']
+		let documeth = ['adoptNode', 'close', 'createAttribute',
+					\ 'createAttributeNS', 'createCDATASection', 'createComment',
+					\ 'createDocumentFragment', 'createElement', 'createElementNS',
+					\ 'createEvent', 'createExpression', 'createNSResolver',
+					\ 'createNodeIterator', 'createProcessingInstruction', 'createRange',
+					\ 'createTextNode', 'createTouchList', 'createTreeWalker',
+					\ 'enableStyleSheetsForSet', 'evaluate', 'focus', 'getElementById',
+					\ 'getElementById', 'getElementsByClassName', 'getElementsByName',
+					\ 'getElementsByTagName', 'getElementsByTagNameNS',
+					\ 'hasStorageAccess', 'importNode', 'onClick', 'onDblClick',
+					\ 'onFocus', 'onKeyDown', 'onKeyPress', 'onKeyUp', 'onMouseDown',
+					\ 'onMouseMove', 'onMouseOut', 'onMouseOver', 'onMouseUp',
+					\ 'onResize', 'open', 'querySelector', 'querySelectorAll',
+					\ 'requestStorageAccess', 'write', 'writeln']
+
 		call map(documeth, 'v:val."("')
 		let docuxprop = ['attributes', 'childNodes', 'doctype', 'documentElement', 'firstChild',
 					\ 'implementation', 'namespaceURI', 'nextSibling', 'nodeName', 'nodeType',
@@ -368,9 +388,11 @@ function! javascriptcomplete#CompleteJS(findstart, base)
 		let xdomelemprop = ['attributes', 'childNodes', 'firstChild', 'lastChild', 
 					\ 'namespaceURI', 'nextSibling', 'nodeName', 'nodeType', 'nodeValue',
 					\ 'ownerDocument', 'parentNode', 'prefix', 'previousSibling', 'tagName']
-		let xdomelemmeth = ['appendChild', 'cloneNode', 'getAttribute', 'getAttributeNode',
-					\ 'getElementsByTagName', 'hasChildNodes', 'insertBefore', 'normalize',
-					\ 'removeAttribute', 'removeAttributeNode', 'removeChild', 'replaceChild',
+		let xdomelemmeth = ['appendChild', 'addEventListener', 'cloneNode',
+					\ 'dispatchEvent', 'getAttribute', 'getAttributeNode',
+					\ 'getElementsByTagName', 'hasChildNodes', 'insertBefore',
+					\ 'normalize', 'removeAttribute', 'removeAttributeNode',
+					\ 'removeChild', 'removeEventListener', 'replaceChild',
 					\ 'setAttribute', 'setAttributeNode']
 		call map(xdomelemmeth, 'v:val."("')
 		let xdomelems = xdomelemprop + xdomelemmeth

runtime/autoload/netrw.vim

@@ -1,7 +1,7 @@
 " netrw.vim: Handles file transfer and remote directory listing across
 "            AUTOLOAD SECTION
-" Date:		Jan 07, 2020
-" Version:	168
+" Date:		Sep 18, 2020
+" Version:	170
 " Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
 " GetLatestVimScripts: 1075 1 :AutoInstall: netrw.vim
 " Copyright:    Copyright (C) 2016 Charles E. Campbell {{{1
@@ -43,7 +43,7 @@ if exists("s:needspatches")
  endfor
 endif
 
-let g:loaded_netrw = "v168"
+let g:loaded_netrw = "v170"
 if !exists("s:NOTE")
  let s:NOTE    = 0
  let s:WARNING = 1
@@ -86,7 +86,16 @@ fun! netrw#ErrorMsg(level,msg,errnum)
   endif
 "  call Decho("level=".level,'~'.expand("<slnum>"))
 
-  if g:netrw_use_errorwindow
+  if g:netrw_use_errorwindow == 2 && (v:version > 802 || (v:version == 802 && has("patch486")))
+   " use popup window
+   if type(a:msg) == 3
+    let msg = [level]+a:msg
+   else
+    let msg= level.a:msg
+   endif
+   let s:popuperr_id  = popup_beval(msg,{})
+   let s:popuperr_text= ""
+ elseif g:netrw_use_errorwindow
    " (default) netrw creates a one-line window to show error/warning
    " messages (reliably displayed)
 
@@ -203,7 +212,11 @@ let g:netrw_localrmdiropt      = ""
 
 " ---------------------------------------------------------------------
 " Default values for netrw's global protocol variables {{{2
-call s:NetrwInit("g:netrw_use_errorwindow",1)
+if (v:version > 802 || (v:version == 802 && has("patch486"))) && has("balloon_eval") && !exists("s:initbeval") && !exists("g:netrw_nobeval") && has("syntax") && exists("g:syntax_on") && has("mouse")
+  call s:NetrwInit("g:netrw_use_errorwindow",2)
+else
+  call s:NetrwInit("g:netrw_use_errorwindow",1)
+endif
 
 if !exists("g:netrw_dav_cmd")
  if executable("cadaver")
@@ -559,6 +572,7 @@ call s:NetrwInit("s:netrw_posn",'{}')
 if v:version >= 700 && has("balloon_eval") && !exists("s:initbeval") && !exists("g:netrw_nobeval") && has("syntax") && exists("g:syntax_on")
 " call Decho("installed beval events",'~'.expand("<slnum>"))
  let &l:bexpr = "netrw#BalloonHelp()"
+" call Decho("&l:bexpr<".&l:bexpr."> buf#".bufnr())
  au FileType netrw	setl beval
  au WinLeave *		if &ft == "netrw" && exists("s:initbeval")|let &beval= s:initbeval|endif
  au VimEnter * 		let s:initbeval= &beval
@@ -591,7 +605,18 @@ if v:version >= 700 && has("balloon_eval") && has("syntax") && exists("g:syntax_
    if &ft != "netrw"
     return ""
    endif
-   if !exists("w:netrw_bannercnt") || v:beval_lnum >= w:netrw_bannercnt || (exists("g:netrw_nobeval") && g:netrw_nobeval)
+   if exists("s:popuperr_id") && popup_getpos(s:popuperr_id) != {}
+    " popup error window is still showing
+    " s:pouperr_id and s:popuperr_text are set up in netrw#ErrorMsg()
+    if exists("s:popuperr_text") && s:popuperr_text != "" && v:beval_text != s:popuperr_text
+     " text under mouse hasn't changed; only close window when it changes
+     call popup_close(s:popuperr_id)
+     unlet s:popuperr_text
+    else
+     let s:popuperr_text= v:beval_text
+    endif
+    let mesg= ""
+   elseif !exists("w:netrw_bannercnt") || v:beval_lnum >= w:netrw_bannercnt || (exists("g:netrw_nobeval") && g:netrw_nobeval)
     let mesg= ""
    elseif     v:beval_text == "Netrw" || v:beval_text == "Directory" || v:beval_text == "Listing"
     let mesg = "i: thin-long-wide-tree  gh: quick hide/unhide of dot-files   qf: quick file info  %:open new file"
@@ -1247,6 +1272,10 @@ fun! netrw#Lexplore(count,rightside,...)
    setlocal winfixwidth
    let g:netrw_altv     = keep_altv
    let t:netrw_lexbufnr = bufnr("%")
+   " done to prevent build-up of hidden buffers due to quitting and re-invocation of :Lexplore.
+   " Since the intended use of :Lexplore is to have an always-present explorer window, the extra
+   " effort to mis-use :Lex is warranted.
+   set bh=wipe
 "   call Decho("let t:netrw_lexbufnr=".t:netrw_lexbufnr) 
 "   call Decho("t:netrw_lexposn".(exists("t:netrw_lexposn")? string(t:netrw_lexposn) : " n/a"))
    if exists("t:netrw_lexposn")
@@ -1908,7 +1937,7 @@ fun! s:NetrwRestoreSetting(keepvar,setting)
     if type(a:setting) == 0
      exe "let ".a:setting."= ".keepvarval
     elseif type(a:setting) == 1
-     exe "let ".a:setting."= '".keepvarval."'"
+     exe "let ".a:setting."= '".substitute(keepvarval,"'","''","g")."'"
     else
      call netrw#ErrorMsg(s:ERROR,"(s:NetrwRestoreSetting) doesn't know how to restore ".a:keepvar." with a setting of type#".type(a:setting),105)
     endif
@@ -3640,6 +3669,8 @@ fun! s:NetrwBookHistSave()
   let savefile= s:NetrwHome()."/.netrwhist"
 "  call Decho("savefile<".savefile.">",'~'.expand("<slnum>"))
   1split
+
+  " setting up a new buffer which will become .netrwhist
   call s:NetrwEnew()
 "  call Decho("case g:netrw_use_noswf=".g:netrw_use_noswf.(exists("+acd")? " +acd" : " -acd"),'~'.expand("<slnum>"))
   if g:netrw_use_noswf
@@ -4722,7 +4753,7 @@ endfun
 "                       "new directory name" is actually a file,
 "                       NetrwBrowseChgDir() edits the file.
 fun! s:NetrwBrowseChgDir(islocal,newdir,...)
-"  call Dfunc("s:NetrwBrowseChgDir(islocal=".a:islocal."> newdir<".a:newdir.">) a:0=".a:0." curpos<".string(getpos("."))."> b:netrw_curdir<".(exists("b:netrw_curdir")? b:netrw_curdir : "").">")
+"  call Dfunc("s:NetrwBrowseChgDir(islocal=".a:islocal."> newdir<".a:newdir.">) a:0=".a:0." win#".winnr()." curpos<".string(getpos("."))."> b:netrw_curdir<".(exists("b:netrw_curdir")? b:netrw_curdir : "").">")
 "  call Decho("tab#".tabpagenr()." win#".winnr()." buf#".bufnr("%")."<".bufname("%")."> line#".line(".")." col#".col(".")." winline#".winline()." wincol#".wincol(),'~'.expand("<slnum>"))
 
   let ykeep= @@
@@ -4751,13 +4782,14 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
   let newdir    = a:newdir
   let dolockout = 0
   let dorestore = 1
+"  call Decho("win#".winnr(),'~'.expand("<slnum>"))
 "  call Decho("dirname<".dirname.">",'~'.expand("<slnum>"))
 "  call Decho("newdir<".newdir.">",'~'.expand("<slnum>"))
 
   " ignore <cr>s when done in the banner
 "  call Decho('(s:NetrwBrowseChgDir) ignore [return]s when done in banner (g:netrw_banner='.g:netrw_banner.")",'~'.expand("<slnum>"))
   if g:netrw_banner
-"   call Decho("w:netrw_bannercnt=".(exists("w:netrw_bannercnt")? w:netrw_bannercnt : 'n/a')." line(.)#".line('.')." line($)#".line("#"),'~'.expand("<slnum>"))
+"   call Decho("win#".winnr()." w:netrw_bannercnt=".(exists("w:netrw_bannercnt")? w:netrw_bannercnt : 'n/a')." line(.)#".line('.')." line($)#".line("#"),'~'.expand("<slnum>"))
    if exists("w:netrw_bannercnt") && line(".") < w:netrw_bannercnt && line("$") >= w:netrw_bannercnt
     if getline(".") =~# 'Quick Help'
 "     call Decho("#1: quickhelp=".g:netrw_quickhelp." ro=".&l:ro." ma=".&l:ma." mod=".&l:mod." wrap=".&l:wrap." (filename<".expand("%")."> win#".winnr()." ft<".&ft.">)",'~'.expand("<slnum>"))
@@ -4794,7 +4826,7 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
    " ------------------------------
    " NetrwBrowseChgDir: edit a file {{{3
    " ------------------------------
-"   call Decho('(s:NetrwBrowseChgDir) edit-a-file: case "handling a file": newdir<'.newdir.'> !~ dirpat<'.dirpat.">",'~'.expand("<slnum>"))
+"   call Decho('edit-a-file: case "handling a file": win#'.winnr().' newdir<'.newdir.'> !~ dirpat<'.dirpat.">",'~'.expand("<slnum>"))
 
    " save position for benefit of Rexplore
    let s:rexposn_{bufnr("%")}= winsaveview()
@@ -4829,7 +4861,7 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
     NetrwKeepj call s:NetrwOptionsRestore("s:")
     let curdir= b:netrw_curdir
     if !exists("s:didsplit")
-"     call Decho("edit-a-file: s:didsplit does not exist; g:netrw_browse_split=".string(g:netrw_browse_split)." win#".winnr(),'~'.expand("<slnum>"))
+"     "     call Decho("edit-a-file: s:didsplit does not exist; g:netrw_browse_split=".string(g:netrw_browse_split)." win#".winnr()." g:netrw_chgwin=".g:netrw_chgwin",'~'.expand("<slnum>"))
      if type(g:netrw_browse_split) == 3
       " open file in server
       " Note that g:netrw_browse_split is a List: [servername,tabnr,winnr]
@@ -4837,22 +4869,27 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
       call s:NetrwServerEdit(a:islocal,dirname)
 "      call Dret("s:NetrwBrowseChgDir")
       return
+
      elseif g:netrw_browse_split == 1
       " horizontally splitting the window first
 "      call Decho("edit-a-file: horizontally splitting window prior to edit",'~'.expand("<slnum>"))
-      keepalt new
+      let winsz= (g:netrw_winsize > 0)? (g:netrw_winsize*winheight(0))/100 : -g:netrw_winsize
+      exe "keepalt ".(g:netrw_alto? "bel " : "abo ").winsz."wincmd s"
       if !&ea
        keepalt wincmd _
       endif
       call s:SetRexDir(a:islocal,curdir)
+
      elseif g:netrw_browse_split == 2
       " vertically splitting the window first
 "      call Decho("edit-a-file: vertically splitting window prior to edit",'~'.expand("<slnum>"))
-      keepalt rightb vert new
+      let winsz= (g:netrw_winsize > 0)? (g:netrw_winsize*winwidth(0))/100 : -g:netrw_winsize
+      exe "keepalt ".(g:netrw_alto? "top " : "bot ")."vert ".winsz."wincmd s"
       if !&ea
        keepalt wincmd |
       endif
       call s:SetRexDir(a:islocal,curdir)
+
      elseif g:netrw_browse_split == 3
       " open file in new tab
 "      call Decho("edit-a-file: opening new tab prior to edit",'~'.expand("<slnum>"))
@@ -4861,6 +4898,7 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
        let b:netrw_curdir= getcwd()
       endif
       call s:SetRexDir(a:islocal,curdir)
+
      elseif g:netrw_browse_split == 4
       " act like "P" (ie. open previous window)
 "      call Decho("edit-a-file: use previous window for edit",'~'.expand("<slnum>"))
@@ -4870,13 +4908,14 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
        return
       endif
       call s:SetRexDir(a:islocal,curdir)
+
      else
       " handling a file, didn't split, so remove menu
 "      call Decho("edit-a-file: handling a file+didn't split, so remove menu",'~'.expand("<slnum>"))
       call s:NetrwMenu(0)
       " optional change to window
       if g:netrw_chgwin >= 1
-"       call Decho("edit-a-file: changing window to #".g:netrw_chgwin,'~'.expand("<slnum>"))
+"       call Decho("edit-a-file: changing window to #".g:netrw_chgwin.": (due to g:netrw_chgwin)",'~'.expand("<slnum>"))
        if winnr("$")+1 == g:netrw_chgwin
 	" if g:netrw_chgwin is set to one more than the last window, then
 	" vertically split the last window to make that window available.
@@ -4889,19 +4928,26 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
       endif
       call s:SetRexDir(a:islocal,curdir)
      endif
+
     endif
 
     " the point where netrw actually edits the (local) file
     " if its local only: LocalBrowseCheck() doesn't edit a file, but NetrwBrowse() will
     " no keepalt to support  :e #  to return to a directory listing
+    if !&mod
+     " if e the new file would fail due to &mod, then don't change any of the flags
+     let dolockout= 1
+    endif
     if a:islocal
 "     call Decho("edit-a-file: edit local file: exe e! ".fnameescape(dirname),'~'.expand("<slnum>"))
      " some like c-^ to return to the last edited file
      " others like c-^ to return to the netrw buffer
+     " Apr 30, 2020: used to have e! here.  That can cause loss of a modified file,
+     " so emit error E37 instead.
      if exists("g:netrw_altfile") && g:netrw_altfile
-      exe "NetrwKeepj keepalt e! ".fnameescape(dirname)
+      exe "NetrwKeepj keepalt e ".fnameescape(dirname)
      else
-      exe "NetrwKeepj e! ".fnameescape(dirname)
+      exe "NetrwKeepj e ".fnameescape(dirname)
      endif
 "     call Decho("edit-a-file: after e! ".dirname.": hidden=".&hidden." bufhidden<".&bufhidden."> mod=".&mod,'~'.expand("<slnum>"))
      call s:NetrwCursor()
@@ -4912,7 +4958,6 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
     else
 "     call Decho("edit-a-file: remote file: NetrwBrowse will edit it",'~'.expand("<slnum>"))
     endif
-    let dolockout= 1
 
     " handle g:Netrw_funcref -- call external-to-netrw functions
     "   This code will handle g:Netrw_funcref as an individual function reference
@@ -5376,16 +5421,6 @@ fun! netrw#BrowseX(fname,remote)
    endif
    let ret= v:shell_error
 
-  elseif has("unix") && executable("kfmclient") && s:CheckIfKde()
-"   call Decho("(netrw#BrowseX) unix and kfmclient",'~'.expand("<slnum>"))
-   call s:NetrwExe("sil !kfmclient exec ".s:ShellEscape(fname,1)." ".redir)
-   let ret= v:shell_error
-
-  elseif has("unix") && executable("exo-open") && executable("xdg-open") && executable("setsid")
-"   call Decho("(netrw#BrowseX) unix, exo-open, xdg-open",'~'.expand("<slnum>"))
-   call s:NetrwExe("sil !setsid xdg-open ".s:ShellEscape(fname,1).redir)
-   let ret= v:shell_error
-
   elseif has("unix") && $DESKTOP_SESSION == "mate" && executable("atril")
 "   call Decho("(netrw#BrowseX) unix and atril",'~'.expand("<slnum>"))
    if a:fname =~ '^https\=://'
@@ -5400,9 +5435,19 @@ fun! netrw#BrowseX(fname,remote)
    endif
    let ret= v:shell_error
 
+  elseif has("unix") && executable("kfmclient") && s:CheckIfKde()
+"   call Decho("(netrw#BrowseX) unix and kfmclient",'~'.expand("<slnum>"))
+   call s:NetrwExe("sil !kfmclient exec ".s:ShellEscape(fname,1)." ".redir)
+   let ret= v:shell_error
+
+  elseif has("unix") && executable("exo-open") && executable("xdg-open") && executable("setsid")
+"   call Decho("(netrw#BrowseX) unix, exo-open, xdg-open",'~'.expand("<slnum>"))
+   call s:NetrwExe("sil !setsid xdg-open ".s:ShellEscape(fname,1).redir.'&')
+   let ret= v:shell_error
+
   elseif has("unix") && executable("xdg-open")
 "   call Decho("(netrw#BrowseX) unix and xdg-open",'~'.expand("<slnum>"))
-   call s:NetrwExe("sil !xdg-open ".s:ShellEscape(fname,1).redir)
+   call s:NetrwExe("sil !xdg-open ".s:ShellEscape(fname,1).redir.'&')
    let ret= v:shell_error
 
   elseif has("macunix") && executable("open")
@@ -6107,10 +6152,10 @@ fun! s:NetrwListHide()
   " Duplicate characters don't matter.
   " Remove all such characters from the '/~@#...890' string.
   " Use the first character left as a separator character.
-"  call Decho("find a character not in the hide string to use as a separator")
+"  call Decho("find a character not in the hide string to use as a separator",'~'.expand("<slnum>"))
   let listhide= g:netrw_list_hide
   let sep     = strpart(substitute('~@#$%^&*{};:,<.>?|1234567890','['.escape(listhide,'-]^\').']','','ge'),1,1)
-"  call Decho("sep=".sep,"  (sep not in hide string)'~'.expand("<slnum>"))
+"  call Decho("sep<".sep.">  (sep not in hide string)",'~'.expand("<slnum>"))
 
   while listhide != ""
    if listhide =~ ','
@@ -6120,7 +6165,7 @@ fun! s:NetrwListHide()
     let hide     = listhide
     let listhide = ""
    endif
-"   call Decho("..extracted from listhide: hide<".hide."> g:netrw_sort_by<".g:netrw_sort_by.'>','~'.expand("<slnum>"))
+"   call Decho("..extracted pattern from listhide: hide<".hide."> g:netrw_sort_by<".g:netrw_sort_by.'>','~'.expand("<slnum>"))
    if g:netrw_sort_by =~ '^[ts]'
     if hide =~ '^\^'
 "     call Decho("..modify hide to handle a \"^...\" pattern",'~'.expand("<slnum>"))
@@ -6132,7 +6177,7 @@ fun! s:NetrwListHide()
    endif
 
    " Prune the list by hiding any files which match
-"   call Decho("..prune the list by hiding any files which ",((g:netrw_hide == 1)? "" : "don't")." match hide<".hide.">")
+"   call Decho("..prune the list by hiding any files which ".((g:netrw_hide == 1)? "" : "don't")."match hide<".hide.">")
    if g:netrw_hide == 1
 "    call Decho("..hiding<".hide.">",'~'.expand("<slnum>"))
     exe 'sil! NetrwKeepj '.w:netrw_bannercnt.',$g'.sep.hide.sep.'d'
@@ -9215,6 +9260,7 @@ endfun
 " (full path directory with trailing slash returned)
 fun! s:NetrwTreeDir(islocal)
 "  call Dfunc("s:NetrwTreeDir(islocal=".a:islocal.") getline(".line(".").")"."<".getline('.')."> b:netrw_curdir<".b:netrw_curdir."> tab#".tabpagenr()." win#".winnr()." buf#".bufnr("%")."<".bufname("%")."> ft=".&ft)
+"  call Decho("Determine tree directory given current cursor position")
 "  call Decho("g:netrw_keepdir  =".(exists("g:netrw_keepdir")?   g:netrw_keepdir   : 'n/a'),'~'.expand("<slnum>"))
 "  call Decho("w:netrw_liststyle=".(exists("w:netrw_liststyle")? w:netrw_liststyle : 'n/a'),'~'.expand("<slnum>"))
 "  call Decho("w:netrw_treetop  =".(exists("w:netrw_treetop")?   w:netrw_treetop   : 'n/a'),'~'.expand("<slnum>"))
@@ -9320,7 +9366,6 @@ fun! s:NetrwTreeDisplay(dir,depth)
    call setline(line("$")+1,a:depth.shortdir.'/')
   endif
 "  call Decho("setline#".line("$")." shortdir<".a:depth.shortdir.">",'~'.expand("<slnum>"))
-
   " append a / to dir if its missing one
   let dir= a:dir
 
@@ -9334,7 +9379,7 @@ fun! s:NetrwTreeDisplay(dir,depth)
    let listhide= split(g:netrw_list_hide,',')
 "   call Decho("listhide=".string(listhide))
    for pat in listhide
-    call filter(w:netrw_treedict[dir],'v:val !~ "'.pat.'"')
+    call filter(w:netrw_treedict[dir],'v:val !~ "'.escape(pat,'\\').'"')
    endfor
 
   elseif g:netrw_hide == 2
@@ -9472,6 +9517,7 @@ fun! s:NetrwTreeListing(dirname)
 "   call Decho("g:netrw_banner=".g:netrw_banner.": banner ".(g:netrw_banner? "enabled" : "suppressed").": (line($)=".line("$")." byte2line(1)=".byte2line(1)." bannercnt=".w:netrw_bannercnt.")",'~'.expand("<slnum>"))
 
    " display from treetop on down
+"   call Decho("(s:NetrwTreeListing) w:netrw_treetop<".w:netrw_treetop.">")
    NetrwKeepj call s:NetrwTreeDisplay(w:netrw_treetop,"")
 "   call Decho("s:NetrwTreeDisplay) setl noma nomod ro",'~'.expand("<slnum>"))
 
@@ -9742,7 +9788,7 @@ fun! s:PerformListing(islocal)
 
   " Hiding...  -or-  Showing... {{{3
   if g:netrw_banner
-"   call Decho("--handle hiding/showing (g:netrw_hide=".g:netrw_hide." g:netrw_list_hide<".g:netrw_list_hide.">)",'~'.expand("<slnum>"))
+"   call Decho("--handle hiding/showing in banner (g:netrw_hide=".g:netrw_hide." g:netrw_list_hide<".g:netrw_list_hide.">)",'~'.expand("<slnum>"))
    if g:netrw_list_hide != "" && g:netrw_hide
     if g:netrw_hide == 1
      NetrwKeepj put ='\"   Hiding:        '.g:netrw_list_hide
@@ -9795,7 +9841,7 @@ fun! s:PerformListing(islocal)
 "  call Decho("g:netrw_banner=".g:netrw_banner.": banner ".(g:netrw_banner? "enabled" : "suppressed").": (line($)=".line("$")." byte2line(1)=".byte2line(1)." bannercnt=".w:netrw_bannercnt.")",'~'.expand("<slnum>"))
 
   if !g:netrw_banner || line("$") >= w:netrw_bannercnt
-"   call Decho("manipulate directory listing (hide)",'~'.expand("<slnum>"))
+"   call Decho("manipulate directory listing (support hide)",'~'.expand("<slnum>"))
 "   call Decho("g:netrw_hide=".g:netrw_hide." g:netrw_list_hide<".g:netrw_list_hide.">",'~'.expand("<slnum>"))
    if g:netrw_hide && g:netrw_list_hide != ""
     NetrwKeepj call s:NetrwListHide()
@@ -11808,7 +11854,7 @@ endfun
 " ---------------------------------------------------------------------
 " s:NetrwEnew: opens a new buffer, passes netrw buffer variables through {{{2
 fun! s:NetrwEnew(...)
-"  call Dfunc("s:NetrwEnew() a:0=".a:0." bufnr($)=".bufnr("$")." expand(%)<".expand("%").">")
+"  call Dfunc("s:NetrwEnew() a:0=".a:0." win#".winnr()." winnr($)=".winnr("$")." bufnr($)=".bufnr("$")." expand(%)<".expand("%").">")
 "  call Decho("curdir<".((a:0>0)? a:1 : "")."> buf#".bufnr("%")."<".bufname("%").">",'~'.expand("<slnum>"))
 
   " grab a function-local-variable copy of buffer variables
@@ -11875,6 +11921,9 @@ fun! s:NetrwEnew(...)
     endif
    endif
   endif
+  if v:version >= 700 && has("balloon_eval") && !exists("s:initbeval") && !exists("g:netrw_nobeval") && has("syntax") && exists("g:syntax_on")
+   let &l:bexpr = "netrw#BalloonHelp()"
+  endif
 
 "  call Dret("s:NetrwEnew : buf#".bufnr("%")."<".bufname("%")."> expand(%)<".expand("%")."> expand(#)<".expand("#")."> bh=".&bh." win#".winnr()." winnr($)#".winnr("$"))
 endfun
@@ -11934,6 +11983,7 @@ endfun
 "           -1=failed
 fun! s:NetrwLcd(newdir)
 "  call Dfunc("s:NetrwLcd(newdir<".a:newdir.">)")
+"  call Decho("changing local directory",'~'.expand("<slnum>"))
 
   let err472= 0
   try
@@ -11969,6 +12019,8 @@ fun! s:NetrwLcd(newdir)
    return -1
   endif
 
+"  call Decho("getcwd        <".getcwd().">")
+"  call Decho("b:netrw_curdir<".b:netrw_curdir.">")
 "  call Dret("s:NetrwLcd 0")
   return 0
 endfun

runtime/autoload/netrwFileHandlers.vim

@@ -1,8 +1,8 @@
 " netrwFileHandlers: contains various extension-based file handlers for
 "                    netrw's browsers' x command ("eXecute launcher")
 " Author:	Charles E. Campbell
-" Date:		May 03, 2013
-" Version:	11b	ASTRO-ONLY
+" Date:		Sep 18, 2020
+" Version:	11
 " Copyright:    Copyright (C) 1999-2012 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
 "               with or without modifications, provided that this copyright
@@ -20,7 +20,7 @@
 if exists("g:loaded_netrwFileHandlers") || &cp
  finish
 endif
-let g:loaded_netrwFileHandlers= "v11b"
+let g:loaded_netrwFileHandlers= "v11"
 if v:version < 702
  echohl WarningMsg
  echo "***warning*** this version of netrwFileHandlers needs vim 7.2"

runtime/autoload/spellfile.vim

@@ -1,15 +1,11 @@
 " Vim script to download a missing spell file
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 Jan 08
+" Last Change:	2020 Jul 10
 
 if !exists('g:spellfile_URL')
-  " Prefer using http:// when netrw should be able to use it, since
-  " more firewalls let this through.
-  if executable("curl") || executable("wget") || executable("fetch")
-    let g:spellfile_URL = 'http://ftp.vim.org/pub/vim/runtime/spell'
-  else
-    let g:spellfile_URL = 'ftp://ftp.vim.org/pub/vim/runtime/spell'
-  endif
+  " Always use https:// because it's secure.  The certificate is for nluug.nl,
+  " thus we can't use the alias ftp.vim.org here.
+  let g:spellfile_URL = 'https://ftp.nluug.nl/pub/vim/runtime/spell'
 endif
 let s:spellfile_URL = ''    " Start with nothing so that s:donedict is reset.
 

runtime/colors/tools/check_colors.vim

@@ -185,7 +185,7 @@ func! Test_check_colors()
 
   " 9) Normal should be defined first, not use reverse, fg or bg
   call cursor(1,1)
-  let pat = 'hi\%[light] \+\%(link\|clear\)\@!\w\+\>'
+  let pat = 'hi\%[ghlight] \+\%(link\|clear\)\@!\w\+\>'
   call search(pat, 'cW') " Look for the first hi def, skipping `hi link` and `hi clear`
   if getline('.') !~# '\m\<Normal\>'
     let err['highlight']['Normal'] = 'Should be defined first'

runtime/compiler/checkstyle.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
 " Compiler:	Checkstyle
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2013 Jun 26
+" Last Change:	2020 Aug 2
 
 if exists("current_compiler")
   finish
@@ -12,8 +12,18 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
   command -nargs=* CompilerSet setlocal <args>
 endif
 
-CompilerSet makeprg=java\ com.puppycrawl.tools.checkstyle.Main\ -f\ plain
+let s:cpo_save = &cpo
+set cpo&vim
 
-" sample error: WebTable.java:282: '+=' is not preceeded with whitespace.
-"		WebTable.java:201:1: '{' should be on the previous line.
-CompilerSet errorformat=%f:%l:%v:\ %m,%f:%l:\ %m,%-G%.%#
+" CompilerSet makeprg=java\ com.puppycrawl.tools.checkstyle.Main\ -f\ plain\ -c\ /sun_checks.xml
+" CompilerSet makeprg=java\ -jar\ checkstyle-X.XX-all.jar\ -f\ plain\ -c\ /sun_checks.xml
+
+CompilerSet makeprg=checkstyle\ -f\ plain
+CompilerSet errorformat=[%tRROR]\ %f:%l:%v:\ %m,
+		       \[%tARN]\ %f:%l:%v:\ %m,
+		       \[%tRROR]\ %f:%l:\ %m,
+		       \[%tARN]\ %f:%l:\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/dart.vim

@@ -0,0 +1,26 @@
+" Vim compiler file
+" Compiler:	Dart VM
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 May 08
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "dart"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=dart
+CompilerSet errorformat=%E%f:%l:%c:\ Error:\ %m,
+		       \%CTry\ %.%#,
+		       \%Z\ %#^%\\+,
+		       \%C%.%#,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/dart2js.vim

@@ -0,0 +1,28 @@
+" Vim compiler file
+" Compiler:	Dart to JavaScript Compiler
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 May 08
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "dart2js"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=dart2js
+CompilerSet errorformat=%E%f:%l:%c:,
+		       \%-GError:\ Compilation\ failed.,
+		       \%CError:\ %m,
+		       \%Z\ %#^%\\+,
+		       \%C%.%#,
+		       \%trror:\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/dart2native.vim

@@ -0,0 +1,28 @@
+" Vim compiler file
+" Compiler:	Dart to Native Compiler
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 May 08
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "dart2native"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=dart2native
+CompilerSet errorformat=%E%f:%l:%c:\ Error:\ %m,
+		       \%CTry\ %.%#,
+		       \%Z\ %#^%\\+,
+		       \%Z%$,
+		       \%C%.%#,
+		       \%E%f:\ %trror:\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/dartanalyser.vim

@@ -0,0 +1,23 @@
+" Vim compiler file
+" Compiler:	Dart Analyzer
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 May 08
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "dartanalyzer"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=dartanalyzer\ --format\ machine
+CompilerSet errorformat=%t%\\w%\\+\|%\\w%\\+\|%\\w%\\+\|%f\|%l\|%c\|%\\d%\\+\|%m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/dartdevc.vim

@@ -0,0 +1,28 @@
+" Vim compiler file
+" Compiler:	Dart Development Compiler
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 May 08
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "dartdevc"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=dartdevc
+CompilerSet errorformat=%E%f:%l:%c:\ Error:\ %m,
+		       \%CTry\ %.%#,
+		       \%Z\ %#^%\\+,
+		       \%Z%$,
+		       \%C%.%#,
+		       \%E%f:\ %trror:\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/dartdoc.vim

@@ -0,0 +1,26 @@
+" Vim compiler file
+" Compiler:	Dart Documentation Generator
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 May 08
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "dartdoc"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=dartdoc
+CompilerSet errorformat=\ \ %tarning:\ %m,
+		       \\ \ %trror:\ %m,
+		       \%+EGeneration\ failed:\ %m,
+		       \%+ISuccess!\ Docs\ generated\ into\ %f,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/dartfmt.vim

@@ -0,0 +1,25 @@
+" Vim compiler file
+" Compiler:	Dart Formatter
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 May 08
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "dartfmt"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=dartfmt
+CompilerSet errorformat=%Eline\ %l\\,\ column\ %c\ of\ %f:\ %m,
+		       \%Z\ %\\{3}│\ %\\+^%\\+,
+		       \%C%.%#,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/eslint.vim

@@ -0,0 +1,16 @@
+" Vim compiler file
+" Compiler:    ESLint for JavaScript
+" Maintainer:  Romain Lafourcade <romainlafourcade@gmail.com>
+" Last Change: 2020 August 20
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "eslint"
+
+if exists(":CompilerSet") != 2
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+CompilerSet makeprg=npx\ eslint\ --format\ compact
+CompilerSet errorformat=%f:\ line\ %l\\,\ col\ %c\\,\ %m,%-G%.%#

runtime/compiler/gawk.vim

@@ -0,0 +1,34 @@
+" Vim compiler file
+" Compiler:	GNU Awk
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2020 Feb 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "gawk"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=gawk
+CompilerSet errorformat=%Z%.awk:\ %f:%l:\ %p^\ %m,
+		       \%Eg%\\=awk:\ %f:%l:\ fatal:\ %m,
+		       \%Egawk:\ %f:%l:\ error:\ %m,
+		       \%Wgawk:\ %f:%l:\ warning:\ %m,
+		       \%Egawk:\ %f:%l:\ %.%#,
+		       \gawk:\ %f:%l:\ %tatal:\ %m,
+		       \gawk:\ %f:%l:\ %trror:\ %m,
+		       \gawk:\ %f:%l:\ %tarning:\ %m,
+		       \gawk:\ %tatal:\ %m,
+		       \gawk:\ %trror:\ %m,
+		       \gawk:\ %tarning:\ %m,
+		       \%+C%.%#,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/gjs.vim

@@ -0,0 +1,25 @@
+" Vim compiler file
+" Compiler:	GJS (Gnome JavaScript Bindings)
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 Jul 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "gjs"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=gjs
+CompilerSet errorformat=%.%#JS\ %tRROR:\ %m\ @\ %f:%c,
+		       \%E%.%#JS\ ERROR:\ %m,
+		       \%Z@%f:%l:%c,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/javac.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:	javac
+" Compiler:	Java Development Kit Compiler
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2004 Nov 27
+" Last Change:	2019 Oct 21
 
 if exists("current_compiler")
   finish
@@ -12,6 +12,15 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
   command -nargs=* CompilerSet setlocal <args>
 endif
 
-CompilerSet makeprg=javac
+let s:cpo_save = &cpo
+set cpo&vim
 
-CompilerSet errorformat=%E%f:%l:\ %m,%-Z%p^,%-C%.%#,%-G%.%#
+CompilerSet makeprg=javac
+CompilerSet errorformat=%E%f:%l:\ error:\ %m,
+		       \%W%f:%l:\ warning:\ %m,
+		       \%-Z%p^,
+		       \%-C%.%#,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/jest.vim

@@ -0,0 +1,30 @@
+" Vim compiler file
+" Compiler:	Jest
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2018 May 15
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "jest"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" CompilerSet makeprg=npx\ jest\ --no-colors
+
+CompilerSet makeprg=jest\ --no-colors
+CompilerSet errorformat=%E\ \ ●\ %m,
+		       \%Z\ %\\{4}%.%#Error:\ %f:\ %m\ (%l:%c):%\\=,
+		       \%Z\ %\\{6}at\ %\\S%#\ (%f:%l:%c),
+		       \%+C\ %\\{4}%\\w%.%#,
+		       \%+C\ %\\{4}%[-+]%.%#,
+		       \%-C%.%#,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/jjs.vim

@@ -0,0 +1,24 @@
+" Vim compiler file
+" Compiler:	Nashorn Shell
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2018 Jan 9
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "jjs"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=jjs
+CompilerSet errorformat=%f:%l:%c\ %m,
+		       \%f:%l\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/jshint.vim

@@ -0,0 +1,25 @@
+" Vim compiler file
+" Compiler:	JSHint
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 Jul 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "jshint"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" CompilerSet makeprg=npx\ jshint\ --verbose
+
+CompilerSet makeprg=jshint\ --verbose
+CompilerSet errorformat=%f:\ line\ %l\\,\ col\ %c\\,\ %m\ (%t%n),
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/jsonlint.vim

@@ -0,0 +1,25 @@
+" Vim compiler file
+" Compiler:	JSON Lint
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 Jul 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "jsonlint"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" CompilerSet makeprg=npx\ jsonlint\ --compact\ --quiet
+
+CompilerSet makeprg=jsonlint\ --compact\ --quiet
+CompilerSet errorformat=%f:\ line\ %l\\,\ col\ %c\\,\ found:\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/rhino.vim

@@ -0,0 +1,30 @@
+" Vim compiler file
+" Compiler:	Rhino Shell (JavaScript in Java)
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 Jul 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "rhino"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" CompilerSet makeprg=java\ -jar\ lib/rhino-X.X.XX.jar\ -w\ -strict
+
+CompilerSet makeprg=rhino
+CompilerSet errorformat=%-Gjs:\ %.%#Compilation\ produced%.%#,
+		       \%Ejs:\ \"%f\"\\,\ line\ %l:\ %m,
+		       \%Ejs:\ uncaught\ JavaScript\ runtime\ exception:\ %m,
+		       \%Wjs:\ warning:\ \"%f\"\\,\ line\ %l:\ %m,
+		       \%Zjs:\ %p^,
+		       \%Cjs:\ %.%#,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/rubocop.vim

@@ -0,0 +1,23 @@
+" Vim compiler file
+" Compiler:	RuboCop
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 Jul 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "rubocop"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+CompilerSet makeprg=rubocop\ --format\ emacs
+CompilerSet errorformat=%f:%l:%c:\ %t:\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/standard.vim

@@ -0,0 +1,16 @@
+" Vim compiler file
+" Compiler:    Standard for JavaScript
+" Maintainer:  Romain Lafourcade <romainlafourcade@gmail.com>
+" Last Change: 2020 August 20
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "standard"
+
+if exists(":CompilerSet") != 2
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+CompilerSet makeprg=npx\ standard
+CompilerSet errorformat=%f:%l:%c:\ %m,%-G%.%#

runtime/compiler/stylelint.vim

@@ -0,0 +1,26 @@
+" Vim compiler file
+" Compiler:	Stylelint
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2020 Jun 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "stylelint"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" CompilerSet makeprg=npx\ stylelint\ --formatter\ compact
+
+CompilerSet makeprg=stylelint\ --formatter\ compact
+CompilerSet errorformat=%f:\ line\ %l\\,\ col\ %c\\,\ %trror\ -\ %m,
+		       \%f:\ line\ %l\\,\ col\ %c\\,\ %tarning\ -\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/ts-node.vim

@@ -0,0 +1,29 @@
+" Vim compiler file
+" Compiler:	TypeScript Runner
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2020 Feb 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "node"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" CompilerSet makeprg=npx\ ts-node
+
+CompilerSet makeprg=ts-node
+CompilerSet errorformat=%f\ %#(%l\\,%c):\ %trror\ TS%n:\ %m,
+		       \%E%f:%l,
+		       \%+Z%\\w%\\+Error:\ %.%#,
+		       \%C%p^%\\+,
+		       \%C%.%#,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/tsc.vim

@@ -0,0 +1,26 @@
+" Vim compiler file
+" Compiler:	TypeScript Compiler
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2020 Feb 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "tsc"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" CompilerSet makeprg=npx\ tsc
+
+CompilerSet makeprg=tsc
+CompilerSet errorformat=%f\ %#(%l\\,%c):\ %trror\ TS%n:\ %m,
+		       \%trror\ TS%n:\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/typedoc.vim

@@ -0,0 +1,28 @@
+" Vim compiler file
+" Compiler:	TypeDoc
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2020 Feb 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "typedoc"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" CompilerSet makeprg=npx\ typedoc
+
+CompilerSet makeprg=typedoc
+CompilerSet errorformat=%EError:\ %f(%l),
+		       \%WWarning:\ %f(%l),
+		       \%+IDocumentation\ generated\ at\ %f,
+		       \%Z\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/compiler/xmllint.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
-" Compiler:	xmllint
+" Compiler:	Libxml2 Command-Line Tool
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2013 Jul 8
+" Last Change:	2020 Jul 30
 
 if exists("current_compiler")
   finish
@@ -13,14 +13,16 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
 endif
 
 let s:cpo_save = &cpo
-set cpo-=C
+set cpo&vim
 
 CompilerSet makeprg=xmllint\ --valid\ --noout
-
-CompilerSet errorformat=%+E%f:%l:\ %.%#\ error\ :\ %m,
-		    \%+W%f:%l:\ %.%#\ warning\ :\ %m,
-		    \%-Z%p^,
-		    \%-G%.%#
+CompilerSet errorformat=%E%f:%l:\ %.%#\ error\ :\ %m,
+		       \%W%f:%l:\ %.%#\ warning\ :\ %m,
+		       \%-Z%p^,
+		       \%C%.%#,
+		       \%terror:\ %m,
+		       \%tarning:\ %m,
+		       \%-G%.%#
 
 let &cpo = s:cpo_save
 unlet s:cpo_save

runtime/compiler/xo.vim

@@ -0,0 +1,26 @@
+" Vim compiler file
+" Compiler:	XO
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2019 Jul 10
+
+if exists("current_compiler")
+  finish
+endif
+let current_compiler = "xo"
+
+if exists(":CompilerSet") != 2		" older Vim always used :setlocal
+  command -nargs=* CompilerSet setlocal <args>
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" CompilerSet makeprg=npx\ xo\ --reporter\ compact
+
+CompilerSet makeprg=xo\ --reporter\ compact
+CompilerSet errorformat=%f:\ line\ %l\\,\ col\ %c\\,\ %trror\ %m,
+		       \%f:\ line\ %l\\,\ col\ %c\\,\ %tarning\ %m,
+		       \%-G%.%#
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/doc/Makefile

@@ -141,6 +141,7 @@ DOCS = \
 	usr_43.txt \
 	usr_44.txt \
 	usr_45.txt \
+	usr_46.txt \
 	usr_90.txt \
 	usr_toc.txt \
 	various.txt \
@@ -282,6 +283,7 @@ HTMLS = \
 	usr_43.html \
 	usr_44.html \
 	usr_45.html \
+	usr_46.html \
 	usr_90.html \
 	usr_toc.html \
 	various.html \
@@ -317,7 +319,11 @@ CONVERTED = \
 	evim-ru.UTF-8.1 \
 	vimdiff-ru.UTF-8.1 \
 	vimtutor-ru.UTF-8.1 \
-	xxd-ru.UTF-8.1
+	xxd-ru.UTF-8.1 \
+	vim-tr.UTF-8.1 \
+	evim-tr.UTF-8.1 \
+	vimdiff-tr.UTF-8.1 \
+	vimtutor-tr.UTF-8.1
 
 .SUFFIXES:
 .SUFFIXES: .c .o .txt .html
@@ -390,7 +396,7 @@ test_urls:
 	vim -S test_urls.vim
 
 clean:
-	-rm doctags *.html tags.ref
+	-rm -f doctags *.html tags.ref
 
 # These files are in the extra archive, skip if not present
 
@@ -509,3 +515,15 @@ vimtutor-ru.UTF-8.1: vimtutor-ru.1
 
 xxd-ru.UTF-8.1: xxd-ru.1
 	iconv -f KOI8-R -t utf-8 $< >$@
+
+vim-tr.UTF-8.1: vim-tr.1
+	iconv -f latin5 -t utf-8 $< >$@
+
+evim-tr.UTF-8.1: evim-tr.1
+	iconv -f latin5 -t utf-8 $< >$@
+
+vimdiff-tr.UTF-8.1: vimdiff-tr.1
+	iconv -f latin5 -t utf-8 $< >$@
+
+vimtutor-tr.UTF-8.1: vimtutor-tr.1
+	iconv -f latin5 -t utf-8 $< >$@

runtime/doc/arabic.txt

@@ -77,7 +77,7 @@ Arabic requires ISO-8859-6 as well as Presentation Form-B fonts
 (without Form-B, Arabic will _NOT_ be usable).	It is highly
 recommended that users search for so-called 'ISO-10646-1' fonts.
 Do an Internet search or check www.arabeyes.org for further
-info on where to attain the necessary Arabic fonts.
+info on where to obtain the necessary Arabic fonts.
 
 
 Font Installation
@@ -123,7 +123,7 @@ o  Setting the appropriate character Encoding
 >
 		:set encoding=utf-8
 <
-   to your .vimrc file (entering the command manually into you Vim
+   to your .vimrc file (entering the command manually into your Vim
    window is highly discouraged).  In short, include ':set
    encoding=utf-8' to your .vimrc file.
 

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.2.  Last change: 2020 Jan 26
+*autocmd.txt*   For Vim version 8.2.  Last change: 2020 Aug 02
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -380,6 +380,7 @@ Name			triggered by ~
 			info
 
 |User|			to be used in combination with ":doautocmd"
+|SigUSR1|		after the SIGUSR1 signal has been detected
 
 
 The alphabetical list of autocommand events:		*autocmd-events-abc*
@@ -1153,11 +1154,14 @@ TextYankPost			After text has been yanked or deleted in the
 						register.
 				   regtype	Type of the register, see
 						|getregtype()|.
+				   visual	True if the operation is
+						performed on a |Visual| area.
 				Not triggered when |quote_| is used nor when
 				called recursively.
 				It is not allowed to change the buffer text,
 				see |textlock|.
 				{only when compiled with the +eval feature}
+
 							*User*
 User				Never executed automatically.  To be used for
 				autocommands that are only executed with
@@ -1166,6 +1170,15 @@ User				Never executed automatically.  To be used for
 				used while there are no matching autocommands,
 				you will get an error.  If you don't want
 				that, define a dummy autocommand yourself.
+
+							*SigUSR1*
+SigUSR1				After the SIGUSR1 signal has been detected.
+				Could be used if other ways of notifying Vim
+				are not feasible.  E.g. to check for the
+				result of a build that takes a long time, or
+				when a motion sensor is triggered.
+				{only on Unix}
+
 							*UserGettingBored*
 UserGettingBored		When the user presses the same key 42 times.
 				Just kidding! :-)
@@ -1412,8 +1425,8 @@ name!
 :aug[roup]! {name}		Delete the autocmd group {name}.  Don't use
 				this if there is still an autocommand using
 				this group!  You will get a warning if doing
-				it anyway. when the group is the current group
-				you will get error E936.
+				it anyway.  When the group is the current
+				group you will get error E936.
 
 To enter autocommands for a specific group, use this method:
 1. Select the group with ":augroup {name}".

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 8.2.  Last change: 2020 Apr 26
+*change.txt*    For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -153,7 +153,7 @@ the 'joinspaces' option is on, these commands insert two spaces after a '.',
 '!' or '?' (but if 'cpoptions' includes the 'j' flag, they insert two spaces
 only after a '.').
 The 'B' and 'M' flags in 'formatoptions' change the behavior for inserting
-spaces before and after a multi-byte character |fo-table|.
+spaces before and after a multibyte character |fo-table|.
 
 The '[ mark is set at the end of the first line that was joined, '] at the end
 of the resulting line.
@@ -1680,14 +1680,18 @@ b	Like 'v', but only auto-wrap if you enter a blank at or before
 l	Long lines are not broken in insert mode: When a line was longer than
 	'textwidth' when the insert command started, Vim does not
 	automatically format it.
-m	Also break at a multi-byte character above 255.  This is useful for
+m	Also break at a multibyte character above 255.  This is useful for
 	Asian text where every character is a word on its own.
-M	When joining lines, don't insert a space before or after a multi-byte
+M	When joining lines, don't insert a space before or after a multibyte
 	character.  Overrules the 'B' flag.
-B	When joining lines, don't insert a space between two multi-byte
+B	When joining lines, don't insert a space between two multibyte
 	characters.  Overruled by the 'M' flag.
 1	Don't break a line after a one-letter word.  It's broken before it
 	instead (if possible).
+]	Respect textwidth rigorously. With this flag set, no line can be
+	longer than textwidth, unless line-break-prohibition rules make this
+	impossible.  Mainly for CJK scripts and works only if 'encoding' is
+	"utf-8".
 j	Where it makes sense, remove a comment leader when joining lines.  For
 	example, joining:
 		int i;   // the index ~
@@ -1751,7 +1755,7 @@ Some examples:
 Automatic formatting				*auto-format* *autoformat*
 
 When the 'a' flag is present in 'formatoptions' text is formatted
-automatically when inserting text or deleting text.  This works nice for
+automatically when inserting text or deleting text.  This works nicely for
 editing text paragraphs.  A few hints on how to use this:
 
 - You need to properly define paragraphs.  The simplest is paragraphs that are

runtime/doc/channel.txt

@@ -1,4 +1,4 @@
-*channel.txt*      For Vim version 8.2.  Last change: 2019 Dec 07
+*channel.txt*      For Vim version 8.2.  Last change: 2020 Sep 03
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -608,6 +608,10 @@ ch_logfile({fname} [, {mode}])					*ch_logfile()*
 		after every message, on Unix you can use "tail -f" to see what
 		is going on in real time.
 
+		To enable the log very early, to see what is received from a
+		terminal during startup, use |--cmd|: >
+			vim --cmd "call ch_logfile('logfile', 'w')"
+<
 		This function is not available in the |sandbox|.
 		NOTE: the channel communication is stored in the file, be
 		aware that this may contain confidential and privacy sensitive
@@ -1235,8 +1239,8 @@ If you want to type input for the job in a Vim window you have a few options:
 - Use a terminal window.  This works well if what you type goes directly to
   the job and the job output is directly displayed in the window.
   See |terminal-window|.
-- Use a prompt window. This works well when entering a line for the job in Vim
-  while displaying (possibly filtered) output from the job.
+- Use a window with a prompt buffer. This works well when entering a line for
+  the job in Vim while displaying (possibly filtered) output from the job.
 
 A prompt buffer is created by setting 'buftype' to "prompt". You would
 normally only do that in a newly created buffer.
@@ -1256,10 +1260,12 @@ After setting 'buftype' to "prompt" Vim does not automatically start Insert
 mode, use `:startinsert` if you want to enter Insert mode, so that the user
 can start typing a line.
 
-The text of the prompt can be set with the |prompt_setprompt()| function.
+The text of the prompt can be set with the |prompt_setprompt()| function. If
+no prompt is set with |prompt_setprompt()|, "% " is used. You can get the
+effective prompt text for a buffer, with |prompt_getprompt()|.
 
 The user can go to Normal mode and navigate through the buffer.  This can be
-useful see older output or copy text.
+useful to see older output or copy text.
 
 The CTRL-W key can be used to start a window command, such as CTRL-W w to
 switch to the next window.  This also works in Insert mode (use Shift-CTRL-W
@@ -1270,5 +1276,46 @@ Any command that starts Insert mode, such as "a", "i", "A" and "I", will move
 the cursor to the last line.  "A" will move to the end of the line, "I" to the
 start of the line.
 
+Here is an example for Unix.  It starts a shell in the background and prompts
+for the next shell command.  Output from the shell is displayed above the
+prompt. >
+
+	" Create a channel log so we can see what happens.
+	call ch_logfile('logfile', 'w')
+
+	" Function handling a line of text has been typed.
+	func TextEntered(text)
+	  " Send the text to a shell with Enter appended.
+	  call ch_sendraw(g:shell_job, a:text .. "\n")
+	endfunc
+		
+	" Function handling output from the shell: Added above the prompt.
+	func GotOutput(channel, msg)
+	  call append(line("$") - 1, "- " . a:msg)
+	endfunc
+
+	" Function handling the shell exist: close the window.
+	func JobExit(job, status)
+	  quit!
+	endfunc
+
+	" Start a shell in the background.
+	let shell_job = job_start(["/bin/sh"], #{
+		\ out_cb: function('GotOutput'),
+		\ err_cb: function('GotOutput'),
+		\ exit_cb: function('JobExit'),
+		\ })
+	let shell_ch = job_getchannel(shell_job)
+
+	new
+	set buftype=prompt
+	let buf = bufnr('')
+	call prompt_setcallback(buf, function("TextEntered"))
+	eval prompt_setprompt(buf, "shell command: ")
+
+	" start accepting shell commands
+	startinsert
+<
+
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 8.2.  Last change: 2020 Apr 23
+*cmdline.txt*   For Vim version 8.2.  Last change: 2020 Sep 14
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -797,7 +797,7 @@ three lines: >
 <
 
 Visual Mode and Range					*v_:*
-
+							*:star-visual-range*
 {Visual}:	Starts a command-line with the Visual selected lines as a
 		range.  The code `:'<,'>` is used for this range, which makes
 		it possible to select a similar line from the command-line
@@ -873,49 +873,62 @@ it, no matter how many backslashes.
 	   \\#			\#
 Also see |`=|.
 
-			       *:<cword>* *<cword>* *:<cWORD>* *<cWORD>*
-			       *:<cexpr>* *<cexpr>* *:<cfile>* *<cfile>*
-			       *:<afile>* *<afile>* *:<abuf>* *<abuf>*
-			       *:<amatch>* *<amatch>*
-			       *:<sfile>* *<sfile>* *:<slnum>* *<slnum>*
-			       *:<sflnum>* *<sflnum>* *E499* *E500*
+							*E499* *E500*
 Note: these are typed literally, they are not special keys!
+							*:<cword>* *<cword>*
 	<cword>    is replaced with the word under the cursor (like |star|)
+							*:<cWORD>* *<cWORD>*
 	<cWORD>    is replaced with the WORD under the cursor (see |WORD|)
+							*:<cexpr>* *<cexpr>*
 	<cexpr>    is replaced with the word under the cursor, including more
 		   to form a C expression.  E.g., when the cursor is on "arg"
 		   of "ptr->arg" then the result is "ptr->arg"; when the
 		   cursor is on "]" of "list[idx]" then the result is
 		   "list[idx]".  This is used for |v:beval_text|.
+							*:<cfile>* *<cfile>*
 	<cfile>    is replaced with the path name under the cursor (like what
 		   |gf| uses)
+							*:<afile>* *<afile>*
 	<afile>    When executing autocommands, is replaced with the file name
 		   of the buffer being manipulated, or the file for a read or
 		   write.  *E495*
+							*:<abuf>* *<abuf>*
 	<abuf>     When executing autocommands, is replaced with the currently
 		   effective buffer number (for ":r file" and ":so file" it is
 		   the current buffer, the file being read/sourced is not in a
 		   buffer).  *E496*
+							*:<amatch>* *<amatch>*
 	<amatch>   When executing autocommands, is replaced with the match for
 		   which this autocommand was executed.  *E497*
 		   It differs from <afile> only when the file name isn't used
 		   to match with (for FileType, Syntax and SpellFileMissing
 		   events).
+							*:<sfile>* *<sfile>*
 	<sfile>    When executing a ":source" command, is replaced with the
 		   file name of the sourced file.  *E498*
-		   When executing a function, is replaced with:
-		   "function {function-name}[{lnum}]"
-		   function call nesting is indicated like this:
-		   "function {function-name1}[{lnum}]..{function-name2}[{lnum}]"
+		   When executing a function, is replaced with the call stack,
+		   as with <stack> (this is for backwards compatibility, using
+		   <stack> is preferred).
 		   Note that filename-modifiers are useless when <sfile> is
-		   used inside a function.
+		   not used inside a script.
+							*:<stack>* *<stack>*
+	<stack>	   is replaced with the call stack, using
+		   "function {function-name}[{lnum}]" for a function line
+		   and "script {file-name}[{lnum}]" for a script line, and
+		   ".." in between items.  E.g.:
+		   "function {function-name1}[{lnum}]..{function-name2}[{lnum}]"
+							*:<slnum>* *<slnum>*
 	<slnum>	   When executing a ":source" command, is replaced with the
 		   line number.  *E842*
 		   When executing a function it's the line number relative to
 		   the start of the function.
+							*:<sflnum>* *<sflnum>*
 	<sflnum>   When executing a script, is replaced with the line number.
 		   It differs from <slnum> in that <sflnum> is replaced with
 		   the script line number in any situation.  *E961*
+							*:<client>* *<client>*
+	<client>   is replaced with the {clinetid} of the last received
+		   message in |server2client()|
 
 							 *filename-modifiers*
 *:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs* *::S*
@@ -1126,7 +1139,8 @@ CTRL-C		Continue in Command-line mode.  The command-line under the
 		in Normal mode.  There is no redraw, thus the window will
 		remain visible.
 :quit		Discard the command line and go back to Normal mode.
-		":close", ":exit", ":xit" and CTRL-\ CTRL-N also work.
+		":close", CTRL-W c, ":exit", ":xit" and CTRL-\ CTRL-N also
+		work.
 :qall		Quit Vim, unless there are changes in some buffer.
 :qall!		Quit Vim, discarding changes to any buffer.
 

runtime/doc/develop.txt

@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 8.2.  Last change: 2020 Apr 13
+*develop.txt*   For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -34,8 +34,8 @@ balance must be found between them.
 VIM IS... VI COMPATIBLE					*design-compatible*
 
 First of all, it should be possible to use Vim as a drop-in replacement for
-Vi.  When the user wants to, he can use Vim in compatible mode and hardly
-notice any difference with the original Vi.
+Vi.  When the user wants to, Vim can be used in compatible mode and hardly
+any differences with the original Vi will be noticed.
 
 Exceptions:
 - We don't reproduce obvious Vi bugs in Vim.
@@ -473,7 +473,7 @@ available spell checking libraries and programs.  Unfortunately, the result
 was that none of them provided sufficient capabilities to be used as the spell
 checking engine in Vim, for various reasons:
 
-- Missing support for multi-byte encodings.  At least UTF-8 must be supported,
+- Missing support for multibyte encodings.  At least UTF-8 must be supported,
   so that more than one language can be used in the same file.
   Doing on-the-fly conversion is not always possible (would require iconv
   support).

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 8.2.  Last change: 2019 May 05
+*digraph.txt*   For Vim version 8.2.  Last change: 2020 Jul 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -33,6 +33,8 @@ An alternative is using the 'keymap' option.
 			it is the Unicode character, see |digraph-encoding|.
 			Example: >
 	:digr e: 235 a: 228
+<			You can use `:exe` to enter a hex number: >
+	:exe 'digr += ' .. 0x2A72
 <			Avoid defining a digraph with '_' (underscore) as the
 			first character, it has a special meaning in the
 			future.
@@ -919,6 +921,7 @@ char  digraph	hex	dec	official name ~
 ‟	9"	201F	8223	DOUBLE HIGH-REVERSED-9 QUOTATION MARK
 †	/-	2020	8224	DAGGER
 ‡	/=	2021	8225	DOUBLE DAGGER
+•	oo	2022	8226	BULLET
 ‥	..	2025	8229	TWO DOT LEADER
 …	,.	2026	8230	HORIZONTAL ELLIPSIS
 ‰	%0	2030	8240	PER MILLE SIGN

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.2.  Last change: 2020 May 12
+*editing.txt*   For Vim version 8.2.  Last change: 2020 Aug 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -652,7 +652,7 @@ list of the current window.
 				:args ## x
 <			This will add the "x" item and sort the new list.
 
-:argd[elete] {pattern} ..			*:argd* *:argdelete* *E480*
+:argd[elete] {pattern} ..		*:argd* *:argdelete* *E480* *E610*
 			Delete files from the argument list that match the
 			{pattern}s.  {pattern} is used like a file pattern,
 			see |file-pattern|.  "%" can be used to delete the
@@ -662,7 +662,7 @@ list of the current window.
 			Example: >
 				:argdel *.obj
 
-:[range]argd[elete]	Delete the {range} files from the argument list.
+:[range]argd[elete]	Delete the [range] files from the argument list.
 			Example: >
 				:10,$argdel
 <			Deletes arguments 10 and further, keeping 1-9. >
@@ -1326,6 +1326,10 @@ present in 'cpoptions' and "!" is not used in the command.
 							*:tch* *:tchdir*
 :tch[dir][!]		Same as |:tcd|.
 
+							*:tcd-*
+:tcd[!] -		Change to the previous current directory, before the
+			last ":tcd {path}" command.
+
 							*:lc* *:lcd*
 :lc[d][!] {path}	Like |:cd|, but only set the current directory when
 			the cursor is in the current window.  The current
@@ -1335,9 +1339,28 @@ present in 'cpoptions' and "!" is not used in the command.
 							*:lch* *:lchdir*
 :lch[dir][!]		Same as |:lcd|.
 
+							*:lcd-*
+:lcd[!] -		Change to the previous current directory, before the
+			last ":lcd {path}" command.
+
 							*:pw* *:pwd* *E187*
 :pw[d]			Print the current directory name.
 			Also see |getcwd()|.
+							*:pwd-verbose*
+			When 'verbose' is non-zero, |:pwd| will also display
+			what scope the current directory was set. Example: >
+
+				" Set by :cd
+				:verbose pwd
+				[global] /path/to/current
+
+				" Set by :lcd
+				:verbose pwd
+				[window] /path/to/current
+
+				" Set by :tcd
+				:verbose pwd
+				[tabpage] /path/to/current
 
 So long as no |:lcd| or |:tcd| command has been used, all windows share the
 same current directory.  Using a command to jump to another window doesn't
@@ -1379,7 +1402,7 @@ to 0, 'modeline' off, 'expandtab' off).  Setting the 'binary' option has the
 same effect.  Don't forget to do this before reading the file.
 
 There are a few things to remember when editing binary files:
-- When editing executable files the number of characters must not change.
+- When editing executable files the number of bytes must not change.
   Use only the "R" or "r" command to change text.  Do not delete characters
   with "x" or by backspacing.
 - Set the 'textwidth' option to 0.  Otherwise lines will unexpectedly be
@@ -1387,7 +1410,7 @@ There are a few things to remember when editing binary files:
 - When there are not many <EOL>s, the lines will become very long.  If you
   want to edit a line that does not fit on the screen reset the 'wrap' option.
   Horizontal scrolling is used then.  If a line becomes too long (more than
-  about 32767 characters on the Amiga, much more on 32-bit systems, see
+  about 32767 bytes on the Amiga, much more on 32-bit and 64-bit systems, see
   |limits|) you cannot edit that line.  The line will be split when reading
   the file.  It is also possible that you get an "out of memory" error when
   reading the file.

runtime/doc/evim-tr.1

@@ -0,0 +1,48 @@
+.TH EVIM 1 "16 <20>ubat 2002"
+.SH AD
+evim \- kolay Vim, bir dosyay<61> Vim ile herhangi bir kip olmadan d<>zenleyin
+.SH <EFBFBD>ZET
+.br
+.B evim
+[se<73>enekler] [dosya ..]
+.br
+.B eview
+.SH TANIM
+.B eVim,
+.B Vim'i
+ba<EFBFBD>lat<EFBFBD>r ve onu herhangi bir kipsiz d<>zenleyici gibi davranmas<61>n<EFBFBD> sa<73>lar.
+Bu bildi<64>iniz Vim'dir, ancak bir t<>kla ve yaz d<>zenleyicisi gibi <20>al<61><6C><EFBFBD>r.
+Bir <20>rnek vermek gerekirse MS-Windows <20>zerindeki Not Defteri gibi d<><64><EFBFBD>n<EFBFBD>n.
+.B eVim
+men<EFBFBD>lere ve ara<72> <20>ubuklar<61>na eri<72>im sa<73>layabilmeniz i<>in grafik arabirimde <20>al<61><6C><EFBFBD>r.
+.PP
+Yaln<EFBFBD>zca Vim ile normal bi<62>imde <20>al<61><6C>amayan ki<6B>ilerin kullan<61>m<EFBFBD> i<>indir.
+Dosya d<>zenleme i<>i <20>ok daha verimsiz olacakt<6B>r.
+.PP
+.B eview'<27>n
+ayn<EFBFBD>s<EFBFBD>d<EFBFBD>r, ancak saltokunur kipte ba<62>lar. evim \-R ile de ba<62>lat<61>labilir.
+.PP
+Vim hakk<6B>nda ayr<79>nt<6E>l<EFBFBD> bilgi i<>in: vim(1)
+.PP
+Do<EFBFBD>rudan metin giri<72>ini sa<73>layabilmek i<>in 'insertmode' se<73>ene<6E>i a<><61>l<EFBFBD>r.
+.br
+E<EFBFBD>lemlemeler Kopyala ve Yap<61><70>t<EFBFBD>r MS-Windows ile ayn<79> olacak bi<62>imde ayarlan<61>r.
+CTRL-X metni keser, CTRL-C metni kopyalar ve CTRL-V metni yap<61><70>t<EFBFBD>r<EFBFBD>r.
+CTRL-V'nin orijinal i<>levi i<>in CTRL-Q kullan<61>n.
+.SH SE<EFBFBD>ENEKLER
+Bilgi i<>in: vim(1).
+.SH DOSYALAR
+.TP 15
+/usr/local/lib/vim/evim.vim
+eVim'i ilklendirmek i<>in kullan<61>lan betik.
+.SH NAM-I D<EFBFBD><EFBFBD>ER
+Nam-<2D> di<64>er "Lastik <20>izmeliler i<>in Vim" (Gumbies, Monty Python).
+eVim'i kullan<61>rken bir mendili al<61>p iki ucundan birer d<><64><EFBFBD>m yapman<61>z
+ve kafan<61>za takman<61>z beklenir.
+.SH AYRICA BAKINIZ
+vim(1)
+.SH YAZAR
+.B Vim'in
+b<EFBFBD>y<EFBFBD>k <20>o<EFBFBD>unlu<6C>u Bram Moolenaar taraf<61>ndan ba<62>kalar<61>n<EFBFBD>n kayda de<64>er
+yard<EFBFBD>mlar<EFBFBD>yla yaz<61>lm<6C><6D>t<EFBFBD>r.
+Ek bilgi i<>in Yard<72>m/Te<54>ekk<6B>rler men<65>s<EFBFBD>ne bak<61>n.

runtime/doc/evim-tr.UTF-8.1

@@ -0,0 +1,48 @@
+.TH EVIM 1 "16 Şubat 2002"
+.SH AD
+evim \- kolay Vim, bir dosyayı Vim ile herhangi bir kip olmadan düzenleyin
+.SH ÖZET
+.br
+.B evim
+[seçenekler] [dosya ..]
+.br
+.B eview
+.SH TANIM
+.B eVim,
+.B Vim'i
+başlatır ve onu herhangi bir kipsiz düzenleyici gibi davranmasını sağlar.
+Bu bildiğiniz Vim'dir, ancak bir tıkla ve yaz düzenleyicisi gibi çalışır.
+Bir örnek vermek gerekirse MS-Windows üzerindeki Not Defteri gibi düşünün.
+.B eVim
+menülere ve araç çubuklarına erişim sağlayabilmeniz için grafik arabirimde çalışır.
+.PP
+Yalnızca Vim ile normal biçimde çalışamayan kişilerin kullanımı içindir.
+Dosya düzenleme işi çok daha verimsiz olacaktır.
+.PP
+.B eview'ün
+aynısıdır, ancak saltokunur kipte başlar. evim \-R ile de başlatılabilir.
+.PP
+Vim hakkında ayrıntılı bilgi için: vim(1)
+.PP
+Doğrudan metin girişini sağlayabilmek için 'insertmode' seçeneği açılır.
+.br
+Eşlemlemeler Kopyala ve Yapıştır MS-Windows ile aynı olacak biçimde ayarlanır.
+CTRL-X metni keser, CTRL-C metni kopyalar ve CTRL-V metni yapıştırır.
+CTRL-V'nin orijinal işlevi için CTRL-Q kullanın.
+.SH SEÇENEKLER
+Bilgi için: vim(1).
+.SH DOSYALAR
+.TP 15
+/usr/local/lib/vim/evim.vim
+eVim'i ilklendirmek için kullanılan betik.
+.SH NAM-I DİĞER
+Nam-ı diğer "Lastik Çizmeliler için Vim" (Gumbies, Monty Python).
+eVim'i kullanırken bir mendili alıp iki ucundan birer düğüm yapmanız
+ve kafanıza takmanız beklenir.
+.SH AYRICA BAKINIZ
+vim(1)
+.SH YAZAR
+.B Vim'in
+büyük çoğunluğu Bram Moolenaar tarafından başkalarının kayda değer
+yardımlarıyla yazılmıştır.
+Ek bilgi için Yardım/Teşekkürler menüsüne bakın.

runtime/doc/filetype.txt

@@ -163,8 +163,8 @@ file.  It will be overwritten when installing a new version of Vim.
 
 A. If you want to overrule all default file type checks.
    This works by writing one file for each filetype.  The disadvantage is that
-   means there can be many files.  The advantage is that you can simply drop
-   this file in the right directory to make it work.
+   there can be many files.  The advantage is that you can simply drop this
+   file in the right directory to make it work.
 							*ftdetect*
    1. Create your user runtime directory.  You would normally use the first
       item of the 'runtimepath' option.  Then create the directory "ftdetect"

runtime/doc/ft_sql.txt

@@ -312,7 +312,7 @@ can create any of the following: >
 	$VIM/vimfiles/indent/sqlite.vim
 
 No changes are necessary to the SQLSetType function.  It will automatically
-pickup the new SQL files and load them when you issue the SQLSetType command.
+pick up the new SQL files and load them when you issue the SQLSetType command.
 
 
 ==============================================================================
@@ -519,7 +519,7 @@ beginning with those characters.  >
  4.3.2 Column Completion:			*sql-completion-columns*
 
 The SQL completion plugin can also display a list of columns for particular
-tables.  The column completion is trigger via <C-C>c.
+tables.  The column completion is triggered via <C-C>c.
 
 NOTE: The following example uses <Right> to trigger a column list while
       the popup window is active.
@@ -727,7 +727,7 @@ your platform (often a case on *nix) you define the following variable in
 your |vimrc|: >
     let g:omni_sql_no_default_maps = 1
 
-Do no edit ftplugin/sql.vim directly!  If you change this file your changes
+Do not edit ftplugin/sql.vim directly!  If you change this file your changes
 will be over written on future updates.  Vim has a special directory structure
 which allows you to make customizations without changing the files that are
 included with the Vim distribution.  If you wish to customize the maps

runtime/doc/gui.txt

@@ -1096,8 +1096,9 @@ That's all.  XLFDs are not used.  For Chinese this is reported to work well: >
 
 For Mac OSX you can use something like this: >
     :set guifont=Monaco:h10
-Also see 'macatsui', it can help fix display problems.
-							*E236*
+
+Mono-spaced fonts					*E236*
+
 Note that the fonts must be mono-spaced (all characters have the same width).
 An exception is GTK: all fonts are accepted, but mono-spaced fonts look best.
 

runtime/doc/gui_w32.txt

@@ -451,7 +451,7 @@ with the Intellimouse driver 2.2 and when "Universal Scrolling" is turned on.
 
 XPM support						*w32-xpm-support*
 
-GVim can be build on MS-Windows with support for XPM files.  |+xpm_w32|
+GVim can be built on MS-Windows with support for XPM files.  |+xpm_w32|
 See the Make_mvc.mak file for instructions, search for XPM.
 
 To try out if XPM support works do this: >

runtime/doc/gui_x11.txt

@@ -1,4 +1,4 @@
-*gui_x11.txt*   For Vim version 8.2.  Last change: 2019 May 05
+*gui_x11.txt*   For Vim version 8.2.  Last change: 2020 Jun 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -356,6 +356,9 @@ need to set those up in some sort of gtkrc file.  You'll have to refer
 to the GTK documentation, however little there is, on how to do this.
 See http://developer.gnome.org/doc/API/2.0/gtk/gtk-Resource-Files.html
 for more information.
+							*gtk3-slow*
+If you are using GTK3 and Vim appears to be slow, try setting the environment
+variable $GDK_RENDERING to "image".
 
 
 Tooltip Colors ~

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 8.2.  Last change: 2020 Apr 05
+*help.txt*	For Vim version 8.2.  Last change: 2020 Aug 15
 
 			VIM - main help file
 									 k
@@ -158,7 +158,7 @@ Programming language support ~
 
 Language support ~
 |digraph.txt|	list of available digraphs
-|mbyte.txt|	multi-byte text support
+|mbyte.txt|	multibyte text support
 |mlang.txt|	non-English language support
 |rileft.txt|	right-to-left editing mode
 |arabic.txt|	Arabic language support and editing

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 8.2.  Last change: 2020 Mar 01
+*helphelp.txt*	For Vim version 8.2.  Last change: 2020 Jul 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -369,14 +369,16 @@ highlighting.  So do these:
 You can find the details in $VIMRUNTIME/syntax/help.vim
 
 							*inclusion*
-Some people make a big deal about using "his" when referring to the user,
-thinking it means we assume the user is male.  That is of course not the case,
-it's just a habit of writing help text, which quite often is many years old.
-Also, a lot of the text is written by contributors for who English is not
-their first language.  We do not make any assumptions about the gender of the
-user, no matter how the text is phrased.  And we do not want to waste time on
-this discussion.  The goal is that the reader understands how Vim works, the
-exact wording is secondary.
+Vim is for everybody, no matter race, gender or anything.  Some people make a
+big deal about using "he" or "his" when referring to the user, thinking it
+means we assume the user is male.  That is not the case, it's just a habit of
+writing help text, which quite often is many years old.  Also, a lot of the
+text is written by contributors for whom English is not their first language.
+We do not make any assumptions about the gender of the user, no matter how the
+text is phrased.  Some people have suggested using "they", but that is not
+regular English. We do not want to spend much time on this discussion.  The
+goal is that the reader understands how Vim works, the exact wording is
+secondary.
 
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/if_lua.txt

@@ -1,4 +1,4 @@
-*if_lua.txt*    For Vim version 8.2.  Last change: 2019 Jul 21
+*if_lua.txt*    For Vim version 8.2.  Last change: 2020 Jun 28
 
 
 		  VIM REFERENCE MANUAL    by Luis Carvalho
@@ -199,6 +199,15 @@ Vim evaluation and command execution, and others.
 				returns it. Note that the buffer is not set as
 				current.
 
+	vim.call({name} [, {args}])
+				Proxy to call Vim function named {name} with
+				arguments {args}.  Example: >
+					:lua print(vim.call('has', 'timers'))
+<
+	vim.fn			Proxy to call Vim functions. Proxy methods are
+				created on demand.  Example: >
+					:lua print(vim.fn.has('timers'))
+<
 
 ==============================================================================
 3. List userdata					*lua-list*
@@ -208,14 +217,27 @@ Vim's syntax for lists. Since lists are objects, changes in list references in
 Lua are reflected in Vim and vice-versa. A list "l" has the following
 properties and methods:
 
+NOTE: In patch 8.2.1066 array indexes were changed from zero-based to
+one-based.  You can check with: >
+	    if has("patch-8.2.1066")
+
 Properties
 ----------
 	o "#l" is the number of items in list "l", equivalent to "len(l)"
 	    in Vim.
-	o "l[k]" returns the k-th item in "l"; "l" is zero-indexed, as in Vim.
+	o "l[k]" returns the k-th item in "l"; "l" is one-indexed, as in Lua.
 	    To modify the k-th item, simply do "l[k] = newitem"; in
-	    particular, "l[k] = nil" removes the k-th item from "l".
+	    particular, "l[k] = nil" removes the k-th item from "l". Item can
+	    be added to the end of the list by "l[#l + 1] = newitem"
 	o "l()" returns an iterator for "l".
+	o "table.insert(l, newitem)" inserts an item at the end of the list.
+	    (only Lua 5.3 and later)
+	o "table.insert(l, position, newitem)" inserts an item at the
+	    specified position. "position" is one-indexed.  (only Lua 5.3 and
+	    later)
+	o "table.remove(l, position)" removes an item at the specified
+	    position. "position" is one-indexed.
+
 
 Methods
 -------
@@ -228,13 +250,16 @@ Examples:
 	:let l = [1, 'item']
 	:lua l = vim.eval('l') -- same 'l'
 	:lua l:add(vim.list())
-	:lua l[0] = math.pi
+	:lua l[1] = math.pi
 	:echo l[0] " 3.141593
-	:lua l[0] = nil -- remove first item
+	:lua l[1] = nil -- remove first item
 	:lua l:insert(true, 1)
-	:lua print(l, #l, l[0], l[1], l[-1])
+	:lua print(l, #l, l[1], l[2])
+	:lua l[#l + 1] = 'value'
+	:lua table.insert(l, 100)
+	:lua table.insert(l, 2, 200)
+	:lua table.remove(l, 1)
 	:lua for item in l() do print(item) end
-<
 
 ==============================================================================
 4. Dict userdata					*lua-dict*
@@ -324,6 +349,14 @@ Examples:
 	:lua l = d.len -- assign d as 'self'
 	:lua print(l())
 <
+Lua functions and closures are automatically converted to a Vim |Funcref| and
+can be accessed in Vim scripts.  Example:
+>
+	lua <<EOF
+	vim.fn.timer_start(1000, function(timer)
+	    print('timer callback')
+	end)
+	EOF
 
 ==============================================================================
 7. Buffer userdata					*lua-buffer*

runtime/doc/if_tcl.txt

@@ -275,7 +275,7 @@ Options:
 	$win delcmd {cmd}				*tcl-window-delcmd*
 	Registers the Tcl command {cmd} as a deletion callback for the window.
 	This command is executed (in the global scope) just before the window
-	is closed.  Complex commands should be build with "list": >
+	is closed.  Complex commands should be built with "list": >
 		$win delcmd [list puts vimerr "window deleted"]
 <	See also |tcl-buffer-delcmd|.
 
@@ -357,7 +357,7 @@ Options:
 	$buf delcmd {cmd}				*tcl-buffer-delcmd*
 	Registers the Tcl command {cmd} as a deletion callback for the buffer.
 	This command is executed (in the global scope) just before the buffer
-	is deleted.  Complex commands should be build with "list": >
+	is deleted.  Complex commands should be built with "list": >
 		$buf delcmd [list puts vimerr "buffer [$buf number] gone"]
 <	See also |tcl-window-delcmd|.
 

runtime/doc/indent.txt

@@ -414,11 +414,11 @@ The examples below assume a 'shiftwidth' of 4.
 <
 							*cino-(*
 	(N    When in unclosed parentheses, indent N characters from the line
-	      with the unclosed parentheses.  Add a 'shiftwidth' for every
+	      with the unclosed parenthesis.  Add a 'shiftwidth' for every
 	      extra unclosed parentheses.  When N is 0 or the unclosed
-	      parentheses is the first non-white character in its line, line
+	      parenthesis is the first non-white character in its line, line
 	      up with the next non-white character after the unclosed
-	      parentheses.  (default 'shiftwidth' * 2).
+	      parenthesis.  (default 'shiftwidth' * 2).
 
 		cino=			  cino=(0 >
 		  if (c1 && (c2 ||	    if (c1 && (c2 ||
@@ -439,7 +439,7 @@ The examples below assume a 'shiftwidth' of 4.
 <
 							*cino-U*
 	UN    When N is non-zero, do not ignore the indenting specified by
-	      ( or u in case that the unclosed parentheses is the first
+	      ( or u in case that the unclosed parenthesis is the first
 	      non-white character in its line.  (default 0).
 
 		cino= or cino=(s	  cino=(s,U1 >
@@ -452,8 +452,8 @@ The examples below assume a 'shiftwidth' of 4.
 							*cino-w*
 	wN    When in unclosed parentheses and N is non-zero and either
 	      using "(0" or "u0", respectively, or using "U0" and the unclosed
-	      parentheses is the first non-white character in its line, line
-	      up with the character immediately after the unclosed parentheses
+	      parenthesis is the first non-white character in its line, line
+	      up with the character immediately after the unclosed parenthesis
 	      rather than the first non-white character.  (default 0).
 
 		cino=(0			  cino=(0,w1 >
@@ -464,11 +464,11 @@ The examples below assume a 'shiftwidth' of 4.
 <
 							*cino-W*
 	WN    When in unclosed parentheses and N is non-zero and either
-	      using "(0" or "u0", respectively and the unclosed parentheses is
+	      using "(0" or "u0", respectively and the unclosed parenthesis is
 	      the last non-white character in its line and it is not the
-	      closing parentheses, indent the following line N characters
+	      closing parenthesis, indent the following line N characters
 	      relative to the outer context (i.e. start of the line or the
-	      next unclosed parentheses).  (default: 0).
+	      next unclosed parenthesis).  (default: 0).
 
 		cino=(0			   cino=(0,W4 >
 		  a_long_line(		    a_long_line(
@@ -495,8 +495,8 @@ The examples below assume a 'shiftwidth' of 4.
 <
 							*cino-m*
 	mN    When N is non-zero, line up a line starting with a closing
-	      parentheses with the first character of the line with the
-	      matching opening parentheses.  (default 0).
+	      parenthesis with the first character of the line with the
+	      matching opening parenthesis.  (default 0).
 
 		cino=(s			  cino=(s,m1 >
 		  c = c1 && (		    c = c1 && (
@@ -510,7 +510,7 @@ The examples below assume a 'shiftwidth' of 4.
 <
 							*cino-M*
 	MN    When N is non-zero, line up a line starting with a closing
-	      parentheses with the first character of the previous line.
+	      parenthesis with the first character of the previous line.
 	      (default 0).
 
 		cino=			  cino=M1 >
@@ -569,10 +569,16 @@ The examples below assume a 'shiftwidth' of 4.
 	      recognize preprocessor lines; right-shifting lines that start
 	      with "#" does not work.
 
+								*cino-P*
+	PN    When N is non-zero recognize C pragmas, and indent them like any
+	      other code; does not concern other preprocessor directives.
+	      When N is zero (default): don't recognize C pragmas, treating
+	      them like every other preprocessor directive.
+
 
 The defaults, spelled out in full, are:
 	cinoptions=>s,e0,n0,f0,{0,}0,^0,L-1,:s,=s,l0,b0,gs,hs,N0,E0,ps,ts,is,+s,
-			c3,C0,/0,(2s,us,U0,w0,W0,k0,m0,j0,J0,)20,*70,#0
+			c3,C0,/0,(2s,us,U0,w0,W0,k0,m0,j0,J0,)20,*70,#0,P0
 
 Vim puts a line in column 1 if:
 - It starts with '#' (preprocessor directives), if 'cinkeys' contains '#0'.
@@ -990,7 +996,7 @@ Indent after a nested paren: >
 Indent for a continuation line: >
 	let g:pyindent_continue = 'shiftwidth() * 2'
 
-The method uses |searchpair()| to look back for unclosed parenthesis.  This
+The method uses |searchpair()| to look back for unclosed parentheses.  This
 can sometimes be slow, thus it timeouts after 150 msec.  If you notice the
 indenting isn't correct, you can set a larger timeout in msec: >
 	let g:pyindent_searchpair_timeout = 500

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.2.  Last change: 2020 May 10
+*index.txt*     For Vim version 8.2.  Last change: 2020 May 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -85,7 +85,7 @@ tag		char		action in Insert mode	~
 |i_CTRL-R_CTRL-P| CTRL-R CTRL-P {register}
 				insert the contents of a register literally
 				and fix indent.
-		CTRL-S		(used for terminal control flow)
+		CTRL-S		not used or used for terminal control flow
 |i_CTRL-T|	CTRL-T		insert one shiftwidth of indent in current
 				line
 |i_CTRL-U|	CTRL-U		delete all entered characters in the current
@@ -220,9 +220,9 @@ tag		char	      note action in Normal mode	~
 |CTRL-N|	CTRL-N		1  same as "j"
 |CTRL-O|	CTRL-O		1  go to N older entry in jump list
 |CTRL-P|	CTRL-P		1  same as "k"
-		CTRL-Q		   (used for terminal control flow)
+		CTRL-Q		   not used, or used for terminal control flow
 |CTRL-R|	CTRL-R		2  redo changes which were undone with 'u'
-		CTRL-S		   (used for terminal control flow)
+		CTRL-S		   not used, or used for terminal control flow
 |CTRL-T|	CTRL-T		   jump to N older Tag in tag list
 |CTRL-U|	CTRL-U		   scroll N lines Upwards (default: half a
 				   screen)
@@ -440,6 +440,7 @@ tag		char	      note action in Normal mode	~
 |<C-LeftMouse>|	<C-LeftMouse>	   ":ta" to the keyword at the mouse click
 |<C-Right>|	<C-Right>	1  same as "w"
 |<C-RightMouse>| <C-RightMouse>	   same as "CTRL-T"
+|<C-Tab>|	<C-Tab>		   same as "g<Tab>"
 |<Del>|		["x]<Del>	2  same as "x"
 |N<Del>|	{count}<Del>	   remove the last digit from {count}
 |<Down>|	<Down>		1  same as "j"
@@ -587,6 +588,8 @@ tag		command		   action in Normal mode	~
 				   following the file name.
 |CTRL-W_gt|	CTRL-W g t	   same as `gt`: go to next tab page
 |CTRL-W_gT|	CTRL-W g T	   same as `gT`: go to previous tab page
+|CTRL-W_g<Tab>|	CTRL-W g <Tab>	   same as |g<Tab>|: go to last accessed tab
+				   page.
 |CTRL-W_h|	CTRL-W h	   go to Nth left window (stop at first window)
 |CTRL-W_i|	CTRL-W i	   split window and jump to declaration of
 				   identifier under the cursor
@@ -805,6 +808,7 @@ tag		char	      note action in Normal mode	~
 |g<LeftMouse>|	g<LeftMouse>	   same as <C-LeftMouse>
 		g<MiddleMouse>	   same as <C-MiddleMouse>
 |g<RightMouse>|	g<RightMouse>	   same as <C-RightMouse>
+|g<Tab>|	g<Tab>		   go to the last accessed tab page.
 |g<Up>|		g<Up>		1  same as "gk"
 
 ==============================================================================
@@ -828,7 +832,7 @@ tag		char	      note action in Normal mode	~
 |zD|		zD		   delete folds recursively
 |zE|		zE		   eliminate all folds
 |zF|		zF		   create a fold for N lines
-|zG|		zG		   mark word as good spelled word
+|zG|		zG		   temporarily mark word as correctly spelled
 |zH|		zH		   when 'wrap' off scroll half a screenwidth
 				   to the right
 |zL|		zL		   when 'wrap' off scroll half a screenwidth
@@ -837,7 +841,7 @@ tag		char	      note action in Normal mode	~
 |zN|		zN		   set 'foldenable'
 |zO|		zO		   open folds recursively
 |zR|		zR		   set 'foldlevel' to the deepest fold
-|zW|		zW		   mark word as wrong (bad) spelled word
+|zW|		zW		   temporarily mark word as incorrectly spelled
 |zX|		zX		   re-apply 'foldlevel'
 |z^|		z^		   cursor on line N (default line above
 				   window), otherwise like "z-"
@@ -849,7 +853,7 @@ tag		char	      note action in Normal mode	~
 				   position the cursor at the end (right side)
 				   of the screen
 |zf|		zf{motion}	   create a fold for Nmove text
-|zg|		zg		   mark word as good spelled word
+|zg|		zg		   permanently mark word as correctly spelled
 |zh|		zh		   when 'wrap' off scroll screen N characters
 				   to the right
 |zi|		zi		   toggle 'foldenable'
@@ -870,7 +874,7 @@ tag		char	      note action in Normal mode	~
 |zuW|		zuW		   undo |zW|
 |zuG|		zuG		   undo |zG|
 |zv|		zv		   open enough folds to view the cursor line
-|zw|		zw		   mark word as wrong (bad) spelled word
+|zw|		zw		   permanently mark word as incorrectly spelled
 |zx|		zx		   re-apply 'foldlevel' and do "zv"
 |zz|		zz		   redraw, cursor line at center of window
 |z<Left>|	z<Left>		   same as "zh"
@@ -1056,7 +1060,7 @@ tag		command		action in Command-line editing mode	~
 |c_CTRL-R_CTRL-O| CTRL-R CTRL-O {regname}
 				insert the contents of a register or object
 				under the cursor literally
-		CTRL-S		(used for terminal control flow)
+		CTRL-S		not used, or used for terminal control flow
 |c_CTRL-T|	CTRL-T		previous match when 'incsearch' is active
 |c_CTRL-U|	CTRL-U		remove all characters
 |c_CTRL-V|	CTRL-V		insert next non-digit literally, insert three
@@ -1262,6 +1266,7 @@ tag		command		action ~
 |:debug|	:deb[ug]	run a command in debugging mode
 |:debuggreedy|	:debugg[reedy]	read debug mode commands from normal input
 |:def|		:def		define a Vim9 user function
+|:defcompile|	:defc[ompile]	compile Vim9 user functions in current script
 |:delcommand|	:delc[ommand]	delete user-defined command
 |:delfunction|	:delf[unction]	delete a user function
 |:delmarks|	:delm[arks]	delete marks

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.2.  Last change: 2020 Apr 30
+*insert.txt*    For Vim version 8.2.  Last change: 2020 Sep 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1843,6 +1843,7 @@ a			Append text after the cursor [count] times.  If the
 
 							*A*
 A			Append text at the end of the line [count] times.
+			For using "A" in Visual block mode see |v_b_A|.
 
 <insert>	or				*i* *insert* *<Insert>*
 i			Insert text before the cursor [count] times.
@@ -1855,6 +1856,7 @@ I			Insert text before the first non-blank in the line
 			When the 'H' flag is present in 'cpoptions' and the
 			line only contains blanks, insert start just before
 			the last blank.
+			For using "I" in Visual block mode see |v_b_I|.
 
 							*gI*
 gI			Insert text in column 1 [count] times.

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 8.2.  Last change: 2019 Nov 11
+*intro.txt*     For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -121,14 +121,16 @@ http://www.vim.org/maillist.php
 
 Bug reports:				*bugs* *bug-reports* *bugreport.vim*
 
-There are two ways to report bugs, both work:
-1. Send bug reports to: Vim Developers <vim-dev@vim.org>
+There are three ways to report bugs:
+1. Open an issue on GitHub: https://github.com/vim/vim/issues
+   The text will be forwarded to the vim-dev maillist.
+2. For issues with runtime files, look in the header for an email address or
+   any other way to report it to the maintainer.
+3. Send bug reports to: Vim Developers <vim-dev@vim.org>
    This is a maillist, you need to become a member first and many people will
    see the message.  If you don't want that, e.g. because it is a security
    issue, send it to <bugs@vim.org>, this only goes to the Vim maintainer
    (that's Bram).
-2. Open an issue on GitHub: https://github.com/vim/vim/issues
-   The text will be forwarded to the vim-dev maillist.
 
 Please be brief; all the time that is spent on answering mail is subtracted
 from the time that is spent on improving Vim!  Always give a reproducible
@@ -230,8 +232,8 @@ Vim would never have become what it is now, without the help of these people!
 	Flemming Madsen		X11 client-server, various features and patches
 	Tony Mechelynck		answers many user questions
 	Paul Moore		Python interface extensions, many patches
-	Katsuhito Nagano	Work on multi-byte versions
-	Sung-Hyun Nam		Work on multi-byte versions
+	Katsuhito Nagano	Work on multibyte versions
+	Sung-Hyun Nam		Work on multibyte versions
 	Vince Negri		Win32 GUI and generic console enhancements
 	Steve Oualline		Author of the first Vim book |frombook|
 	Dominique Pelle		Valgrind reports and many fixes
@@ -508,7 +510,7 @@ the ":map" command.  The rules are:
 	   <M-a>		Meta- a  ('a' with bit 8 set)
 	   <M-A>		Meta- A  ('A' with bit 8 set)
 	   <t_kd>		"kd" termcap entry (cursor down key)
-    Although you can specify <M-{char}> with {char} being a multi-byte
+    Although you can specify <M-{char}> with {char} being a multibyte
     character, Vim may not be able to know what byte sequence that is and then
     it won't work.
 

runtime/doc/makehtml.awk

@@ -58,7 +58,7 @@ substr($0,length($0),1) == "~" { print "<B><FONT COLOR=\"PURPLE\">" substr($0,1,
 #
 #ad hoc code
 #
-/^"\|\& / {gsub(/\|/,"\\&#124;"); }
+/^"\|& / {gsub(/\|/,"\\&#124;"); }
 / = b / {gsub(/ b /," \\&#98; "); }
 #
 # one letter tag

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.2.  Last change: 2020 Apr 23
+*map.txt*       For Vim version 8.2.  Last change: 2020 Sep 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -191,6 +191,12 @@ whether to use the "," mapping or the longer one.  To avoid this add the
 <nowait> argument.  Then the mapping will be used when it matches, Vim does
 not wait for more characters to be typed.  However, if the characters were
 already typed they are used.
+Note that this works when the <nowait> mapping fully matches and is found
+before any partial matches.  This works when:
+- There is only one matching buffer-local mapping, since these are always
+  found before global mappings.
+- There is another buffer-local mapping that partly matches, but it is
+  defined earlier (last defined mapping is found first).
 
 						*:map-<silent>* *:map-silent*
 To define a mapping which will not be echoed on the command line, add
@@ -283,15 +289,8 @@ Here is an example that inserts a list number that increases: >
 CTRL-L inserts the next number, CTRL-R resets the count.  CTRL-R returns an
 empty string, so that nothing is inserted.
 
-Note that there are some tricks to make special keys work and escape CSI bytes
-in the text.  The |:map| command also does this, thus you must avoid that it
-is done twice.  This does not work: >
-	:imap <expr> <F3> "<Char-0x611B>"
-Because the <Char- sequence is escaped for being a |:imap| argument and then
-again for using <expr>.  This does work: >
-	:imap <expr> <F3> "\u611B"
-Using 0x80 as a single byte before other text does not work, it will be seen
-as a special key.
+Note that using 0x80 as a single byte before other text does not work, it will
+be seen as a special key.
 
 
 1.3 MAPPING AND MODES					*:map-modes*
@@ -595,7 +594,7 @@ construct can be used:
 	<Char-033>	character 27
 	<Char-0x7f>	character 127
 	<S-Char-114>    character 114 ('r') shifted ('R')
-This is useful to specify a (multi-byte) character in a 'keymap' file.
+This is useful to specify a (multibyte) character in a 'keymap' file.
 Upper and lowercase differences are ignored.
 
 							*map-comments*
@@ -843,11 +842,10 @@ When modifyOtherKeys is enabled you can map <C-[> and <C-S-{>: >
 	imap <C-S-{> {{{
 Without modifyOtherKeys <C-[> and <C-S-{> are indistinguishable from Esc.
 
-A known side effect effect is that in Insert mode the raw escape sequence is
-inserted after the CTRL-V key.  This can be used to check whether
-modifyOtherKeys is enabled: In Insert mode type CTRL-SHIFT-V CTRL-V, if you
-get one byte then modifyOtherKeys is off, if you get <1b>27;5;118~ then it is
-on.
+A known side effect is that in Insert mode the raw escape sequence is inserted
+after the CTRL-V key.  This can be used to check whether modifyOtherKeys is
+enabled: In Insert mode type CTRL-SHIFT-V CTRL-V, if you get one byte then
+modifyOtherKeys is off, if you get <1b>27;5;118~ then it is on.
 
 When the 'esckeys' option is off, then modifyOtherKeys will be disabled in
 Insert mode to avoid every key with a modifier causing Insert mode to end.
@@ -876,35 +874,47 @@ g@{motion}		Call the function set by the 'operatorfunc' option.
 
 Here is an example that counts the number of spaces with <F4>: >
 
-	nmap <silent> <F4> :set opfunc=CountSpaces<CR>g@
-	vmap <silent> <F4> :<C-U>call CountSpaces(visualmode(), 1)<CR>
+	nnoremap <expr> <F4> CountSpaces()
+	xnoremap <expr> <F4> CountSpaces()
+	" doubling <F4> works on a line
+	nnoremap <expr> <F4><F4> CountSpaces() .. '_'
+
+	function CountSpaces(type = '') abort
+	  if a:type == ''
+	    set opfunc=CountSpaces
+	    return 'g@'
+ 	  endif
 
-	function! CountSpaces(type, ...)
 	  let sel_save = &selection
-	  let &selection = "inclusive"
-	  let reg_save = @@
+	  let reg_save = getreginfo('"')
+	  let cb_save = &clipboard
+	  let visual_marks_save = [getpos("'<"), getpos("'>")]
 
-	  if a:0  " Invoked from Visual mode, use gv command.
-	    silent exe "normal! gvy"
-	  elseif a:type == 'line'
-	    silent exe "normal! '[V']y"
-	  else
-	    silent exe "normal! `[v`]y"
-	  endif
-
-	  echomsg strlen(substitute(@@, '[^ ]', '', 'g'))
-
-	  let &selection = sel_save
-	  let @@ = reg_save
+	  try
+	    set clipboard= selection=inclusive
+	    let commands = #{line: "'[V']y", char: "`[v`]y", block: "`[\<c-v>`]y"}
+	    silent exe 'noautocmd keepjumps normal! ' .. get(commands, a:type, '')
+	    echom getreg('"')->count(' ')
+	  finally
+	    call setreg('"', reg_save)
+	    call setpos("'<", visual_marks_save[0])
+	    call setpos("'>", visual_marks_save[1])
+	    let &clipboard = cb_save
+	    let &selection = sel_save
+	  endtry
 	endfunction
 
+An <expr> mapping is used to be able to fetch any prefixed count and register.
+This also avoids using a command line, which would trigger CmdlineEnter and
+CmdlineLeave autocommands.
+
 Note that the 'selection' option is temporarily set to "inclusive" to be able
 to yank exactly the right text by using Visual mode from the '[ to the ']
 mark.
 
-Also note that there is a separate mapping for Visual mode.  It removes the
-"'<,'>" range that ":" inserts in Visual mode and invokes the function with
-visualmode() and an extra argument.
+Also note that the 'clipboard' option is temporarily emptied to avoid
+clobbering the `"*` or `"+` registers, if its value contains the item `unnamed`
+or `unnamedplus`.
 
 ==============================================================================
 2. Abbreviations			*abbreviations* *Abbreviations*
@@ -1168,6 +1178,10 @@ When executing an autocommand or a user command, it will run in the context of
 the script it was defined in.  This makes it possible that the command calls a
 local function or uses a local mapping.
 
+In case the value is used in a context where <SID> cannot be correctly
+expanded, use the expand() function: >
+	let &includexpr = expand('<SID>') .. 'My_includeexpr()'
+
 Otherwise, using "<SID>" outside of a script context is an error.
 
 If you need to get the script number to use in a complicated script, you can
@@ -1492,7 +1506,7 @@ The valid escape sequences are
 	<bang>	(See the '-bang' attribute) Expands to a ! if the
 		command was executed with a ! modifier, otherwise
 		expands to nothing.
-						*<mods>* *:command-modifiers*
+					*<mods>* *<q-mods>* *:command-modifiers*
 	<mods>  The command modifiers, if specified. Otherwise, expands to
 		nothing. Supported modifiers are |:aboveleft|, |:belowright|,
 		|:botright|, |:browse|, |:confirm|, |:hide|, |:keepalt|,

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 8.2.  Last change: 2019 Jul 04
+*mbyte.txt*     For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.
@@ -36,7 +36,7 @@ characters or boxes when using another encoding.
 This is a summary of the multibyte features in Vim.  If you are lucky it works
 as described and you can start using Vim without much trouble.  If something
 doesn't work you will have to read the rest.  Don't be surprised if it takes
-quite a bit of work and experimenting to make Vim use all the multi-byte
+quite a bit of work and experimenting to make Vim use all the multibyte
 features.  Unfortunately, every system has its own way to deal with multibyte
 languages and it is quite complicated.
 
@@ -123,12 +123,12 @@ You can also set 'guifont' alone, Vim will try to find a matching
 
 INPUT
 
-There are several ways to enter multi-byte characters:
+There are several ways to enter multibyte characters:
 - For X11 XIM can be used.  See |XIM|.
 - For MS-Windows IME can be used.  See |IME|.
 - For all systems keymaps can be used.  See |mbyte-keymap|.
 
-The options 'iminsert', 'imsearch' and 'imcmdline' can be used to chose
+The options 'iminsert', 'imsearch' and 'imcmdline' can be used to choose
 the different input methods or disable them temporarily.
 
 ==============================================================================
@@ -141,8 +141,8 @@ in, or just use a certain locale inside Vim.
 
 WHAT IS A LOCALE?					*locale*
 
-There are many of languages in the world.  And there are different cultures
-and environments at least as much as the number of languages.	A linguistic
+There are many languages in the world.  And there are different cultures and
+environments at least as many as the number of languages.  A linguistic
 environment corresponding to an area is called "locale".  This includes
 information about the used language, the charset, collating order for sorting,
 date format, currency format and so on.  For Vim only the language and charset
@@ -237,11 +237,11 @@ encoded with one byte, we call this a single-byte encoding.  The most often
 used one is called "latin1".  This limits the number of characters to 256.
 Some of these are control characters, thus even fewer can be used for text.
 
-When some characters use two or more bytes, we call this a multi-byte
+When some characters use two or more bytes, we call this a multibyte
 encoding.  This allows using much more than 256 characters, which is required
 for most East Asian languages.
 
-Most multi-byte encodings use one byte for the first 127 characters.  These
+Most multibyte encodings use one byte for the first 127 characters.  These
 are equal to ASCII, which makes it easy to exchange plain-ASCII text, no
 matter what language is used.  Thus you might see the right text even when the
 encoding was set wrong.
@@ -488,11 +488,11 @@ possible.
 ==============================================================================
 4. Using a terminal					*mbyte-terminal*
 
-The GUI fully supports multi-byte characters.  It is also possible in a
+The GUI fully supports multibyte characters.  It is also possible in a
 terminal, if the terminal supports the same encoding that Vim uses.  Thus this
 is less flexible.
 
-For example, you can run Vim in a xterm with added multi-byte support and/or
+For example, you can run Vim in a xterm with added multibyte support and/or
 |XIM|.  Examples are kterm (Kanji term) and hanterm (for Korean), Eterm
 (Enlightened terminal) and rxvt.
 
@@ -544,7 +544,7 @@ For Vim you may need to set 'encoding' to "utf-8".
 5.  Fonts on X11					*mbyte-fonts-X11*
 
 Unfortunately, using fonts in X11 is complicated.  The name of a single-byte
-font is a long string.  For multi-byte fonts we need several of these...
+font is a long string.  For multibyte fonts we need several of these...
 
 Note: Most of this is no longer relevant for GTK+ 2.  Selecting a font via
 its XLFD is not supported; see 'guifont' for an example of how to
@@ -610,7 +610,7 @@ written like:
 
 X FONTSET
 						*fontset* *xfontset*
-A single-byte charset is typically associated with one font.  For multi-byte
+A single-byte charset is typically associated with one font.  For multibyte
 charsets a combination of fonts is often used.  This means that one group of
 characters are used from one font and another group from another font (which
 might be double wide).  This collection of fonts is called a fontset.
@@ -889,7 +889,7 @@ input_server_name	is your |IM-server| name (check your |IM-server|
 your_input_style	is one of |OverTheSpot|, |OffTheSpot|, |Root|.  See
 			also |xim-input-style|.
 
-*international may not necessary if you use X11R6.
+*international may not be necessary if you use X11R6.
 *.inputMethod and *.preeditType are optional if you use X11R6.
 
 For example, when you are using kinput2 as |IM-server|, >
@@ -952,7 +952,7 @@ automatically.
 
 This works on not only insert-normal mode, but also search-command input and
 replace mode.
-The options 'iminsert', 'imsearch' and 'imcmdline' can be used to chose
+The options 'iminsert', 'imsearch' and 'imcmdline' can be used to choose
 the different input methods or disable them temporarily.
 
 WHAT IS IME
@@ -1436,7 +1436,7 @@ not everybody is able to type a composing character.
 ==============================================================================
 12. Overview of options					*mbyte-options*
 
-These options are relevant for editing multi-byte files.  Check the help in
+These options are relevant for editing multibyte files.  Check the help in
 options.txt for detailed information.
 
 'encoding'	Encoding used for the keyboard and display.  It is also the
@@ -1456,14 +1456,14 @@ options.txt for detailed information.
 		languages where a sequence of characters can be broken
 		anywhere.
 
-'guifontset'	The list of font names used for a multi-byte encoding.  When
+'guifontset'	The list of font names used for a multibyte encoding.  When
 		this option is not empty, it replaces 'guifont'.
 
 'keymap'	Specify the name of a keyboard mapping.
 
 ==============================================================================
 
-Contributions specifically for the multi-byte features by:
+Contributions specifically for the multibyte features by:
 	Chi-Deok Hwang <hwang@mizi.co.kr>
 	SungHyun Nam <goweol@gmail.com>
 	K.Nagano <nagano@atese.advantest.co.jp>

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 8.2.  Last change: 2020 Jan 01
+*message.txt*   For Vim version 8.2.  Last change: 2020 Sep 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -19,13 +19,14 @@ The ":messages" command can be used to view previously given messages.  This
 is especially useful when messages have been overwritten or truncated.  This
 depends on the 'shortmess' option.
 
-	:messages		Show all messages.
+	:mes[sages]		Show all messages.
 
-	:{count}messages	Show the {count} most recent messages.
+	:{count}mes[sages]	Show the {count} most recent messages.
 
-	:messages clear		Clear all messages.
+	:mes[sages] clear	Clear all messages.
 
-	:{count}messages clear	Clear messages, keeping only the {count} most
+	:{count}mes[sages] clear
+				Clear messages, keeping only the {count} most
 				recent ones.
 
 The number of remembered messages is fixed at 20 for the tiny version and 200
@@ -74,7 +75,7 @@ See `:messages` above.
 
 
 LIST OF MESSAGES
-			*E222* *E228* *E232* *E256* *E293* *E298* *E304* *E317*
+			*E222* *E228* *E232* *E293* *E298* *E304* *E317*
 			*E318* *E356* *E438* *E439* *E440* *E316* *E320* *E322*
 			*E323* *E341* *E473* *E570* *E685* *E292*  >
   Add to read buffer

runtime/doc/mlang.txt

@@ -1,4 +1,4 @@
-*mlang.txt*     For Vim version 8.2.  Last change: 2019 May 05
+*mlang.txt*     For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -7,7 +7,7 @@
 Multi-language features				*multilang* *multi-lang*
 
 This is about using messages and menus in various languages.  For editing
-multi-byte text see |multibyte|.
+multibyte text see |multibyte|.
 
 The basics are explained in the user manual: |usr_45.txt|.
 
@@ -37,6 +37,7 @@ use of "-" and "_".
 :lan[guage] mes[sages]
 :lan[guage] cty[pe]
 :lan[guage] tim[e]
+:lan[guage] col[late]
 			Print the current language (aka locale).
 			With the "messages" argument the language used for
 			messages is printed.  Technical: LC_MESSAGES.
@@ -44,15 +45,19 @@ use of "-" and "_".
 			character encoding is printed.  Technical: LC_CTYPE.
 			With the "time" argument the language used for
 			strftime() is printed.  Technical: LC_TIME.
+			With the "collate" argument the language used for
+			collation order is printed.  Technical: LC_COLLATE.
 			Without argument all parts of the locale are printed
 			(this is system dependent).
 			The current language can also be obtained with the
-			|v:lang|, |v:ctype| and |v:lc_time| variables.
+			|v:lang|, |v:ctype|, |v:collate| and |v:lc_time|
+			variables.
 
 :lan[guage] {name}
 :lan[guage] mes[sages] {name}
 :lan[guage] cty[pe] {name}
 :lan[guage] tim[e] {name}
+:lan[guage] col[late] {name}
 			Set the current language (aka locale) to {name}.
 			The locale {name} must be a valid locale on your
 			system.  Some systems accept aliases like "en" or
@@ -72,7 +77,10 @@ use of "-" and "_".
 			With the "time" argument the language used for time
 			and date messages is set.  This affects strftime().
 			This sets $LC_TIME.
-			Without an argument both are set, and additionally
+			With the "collate" argument the language used for the
+			collation order is set.  This affects sorting of
+			characters. This sets $LC_COLLATE.
+			Without an argument all are set, and additionally
 			$LANG is set.
 			When compiled with the |+float| feature the LC_NUMERIC
 			value will always be set to "C", so that floating

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.2.  Last change: 2019 Nov 16
+*motion.txt*    For Vim version 8.2.  Last change: 2020 Aug 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -495,10 +495,11 @@ a set of section macros, specified by the pairs of characters in the
 'sections' option.  The default is "SHNHH HUnhsh", which defines a section to
 start at the nroff macros ".SH", ".NH", ".H", ".HU", ".nh" and ".sh".
 
-The "]" and "[" commands stop at the '{' or '}' in the first column.  This is
-useful to find the start or end of a function in a C program.  Note that the
-first character of the command determines the search direction and the
-second character the type of brace found.
+The "]]" and "[[" commands stop at the '{' in the first column.  This is
+useful to find the start of a function in a C program.  To search for a '}' in
+the first column, the end of a C function, use "][" (forward) or "[]"
+(backward).  Note that the first character of the command determines the
+search direction.
 
 If your '{' or '}' are not in the first column, and you would like to use "[["
 and "]]" anyway, try these mappings: >
@@ -1142,7 +1143,7 @@ sequence of small changes in a line, for example "xxxxx", adds many positions
 to the change list.  When 'textwidth' is zero 'wrapmargin' is used.  When that
 also isn't set a fixed number of 79 is used.  Detail: For the computations
 bytes are used, not characters, to avoid a speed penalty (this only matters
-for multi-byte encodings).
+for multibyte encodings).
 
 Note that when text has been inserted or deleted the cursor position might be
 a bit different from the position of the change.  Especially when lines have

runtime/doc/netbeans.txt

@@ -1,4 +1,4 @@
-*netbeans.txt*  For Vim version 8.2.  Last change: 2020 Apr 19
+*netbeans.txt*  For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur et al.
@@ -362,12 +362,12 @@ color		Argument with either a decimal number, "none" (without the
 offset		A number argument that indicates a byte position in a buffer.
 		The first byte has offset zero.  Line breaks are counted for
 		how they appear in the file (CR/LF counts for two bytes).
-		Note that a multi-byte character is counted for the number of
+		Note that a multibyte character is counted for the number of
 		bytes it takes.
 
 lnum/col	Argument with a line number and column number position.  The
 		line number starts with one, the column is the byte position,
-		starting with zero.  Note that a multi-byte character counts
+		starting with zero.  Note that a multibyte character counts
 		for several columns.
 
 pathname	String argument: file name with full path.

runtime/doc/options.txt

@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.2.  Last change: 2020 May 03
+*options.txt*	For Vim version 8.2.  Last change: 2020 Sep 15
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -703,6 +703,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	The value "double" cannot be used if 'listchars' or 'fillchars'
 	contains a character that would be double width.
 
+	The values are overruled for characters specified with
+	|setcellwidths()|.
+
 	There are a number of CJK fonts for which the width of glyphs for
 	those characters are solely based on how many octets they take in
 	legacy/traditional CJK encodings.  In those encodings, Euro,
@@ -727,8 +730,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 'antialias' 'anti'	boolean (default: off)
 			global
 			{only available when compiled with GUI enabled
-			on Mac OS X}
-	This option only has an effect in the GUI version of Vim on Mac OS X
+			on macOS}
+	This option only has an effect in the GUI version of Vim on macOS
 	v10.2 or later.  When on, Vim will use smooth ("antialiased") fonts,
 	which can be easier to read at certain sizes on certain displays.
 	Setting this option can sometimes cause problems if 'guifont' is set
@@ -1951,9 +1954,11 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{not available when compiled without the |+textprop|
 			or |+quickfix| feature}
 	When 'completeopt' contains "popup" then this option is used for the
-	properties of the info popup when it is created.  You can also use
-	|popup_findinfo()| and then set properties for an existing info popup
-	with |popup_setoptions()|.  See |complete-popup|.
+	properties of the info popup when it is created.  If an info popup
+	window already exists it is closed, so that the option value is
+	applied when it is created again.
+	You can also use |popup_findinfo()| and then set properties for an
+	existing info popup with |popup_setoptions()|.  See |complete-popup|.
 
 
 						*'concealcursor'* *'cocu'*
@@ -2713,6 +2718,11 @@ A jump table for the options with a short description can be found at |Q_op|.
 				 for Unix: ".,~/tmp,/var/tmp,/tmp")
 			global
 	List of directory names for the swap file, separated with commas.
+	Recommended value:  ".,~/vimswap//" - this will put the swap file next
+	to the edited file if possible, and in your personal swap directory
+	otherwise.  Make sure "~/vimswap//" is only readable for you.
+
+	Possible items:
 	- The swap file will be created in the first directory where this is
 	  possible.
 	- Empty means that no swap file will be used (recovery is
@@ -2726,8 +2736,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	  is replaced with the path name of the edited file.
 	- For Unix and Win32, if a directory ends in two path separators "//",
 	  the swap file name will be built from the complete path to the file
-	  with all path separators substituted to percent '%' signs. This will
-	  ensure file name uniqueness in the preserve directory.
+	  with all path separators replaced by percent '%' signs (including
+	  the colon following the drive letter on Win32). This will ensure
+	  file name uniqueness in the preserve directory.
 	  On Win32, it is also possible to end with "\\".  However, When a
 	  separating comma is following, you must use "//", since "\\" will
 	  include the comma in the file name. Therefore it is recommended to
@@ -2747,9 +2758,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 	the same file twice will result in a warning.  Using "/tmp" on Unix is
 	discouraged: When the system crashes you lose the swap file.
 	"/var/tmp" is often not cleared when rebooting, thus is a better
-	choice than "/tmp".  But it can contain a lot of files, your swap
-	files get lost in the crowd.  That is why a "tmp" directory in your
-	home directory is tried first.
+	choice than "/tmp".  But others on the computer may be able to see the
+	files, and it can contain a lot of files, your swap files get lost in
+	the crowd.  That is why a "tmp" directory in your home directory is
+	tried first.
 	The use of |:set+=| and |:set-=| is preferred when adding or removing
 	directories from the list.  This avoids problems when a future version
 	uses another default.
@@ -2794,7 +2806,10 @@ A jump table for the options with a short description can be found at |Q_op|.
 'emoji' 'emo'	boolean (default: on)
 			global
 	When on all Unicode emoji characters are considered to be full width.
-
+	This excludes "text emoji" characters, which are normally displayed as
+	single width.  Unfortunately there is no good specification for this
+	and it has been determined on trial-and-error basis.  Use the
+	|setcellwidths()| function to change the behavior.
 
 					*'encoding'* *'enc'* *E543*
 'encoding' 'enc'	string (default: "latin1" or value from $LANG)
@@ -2824,7 +2839,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This is specified with 'fileencoding'.  The conversion is done with
 	iconv() or as specified with 'charconvert'.
 
-	If you need to know whether 'encoding' is a multi-byte encoding, you
+	If you need to know whether 'encoding' is a multibyte encoding, you
 	can use: >
 		if has("multi_byte_encoding")
 <
@@ -4133,7 +4148,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 	This option specifies a function that will be called to
 	activate or deactivate the Input Method.
-	It is not used in the GUI.
+	It is not used in the MS-Windows GUI version.
 	The expression will be evaluated in the |sandbox| when set from a
 	modeline, see |sandbox-option|.
 
@@ -4242,7 +4257,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 	This option specifies a function that is called to obtain the status
 	of Input Method.  It must return a positive number when IME is active.
-	It is not used in the GUI.
+	It is not used in the MS-Windows GUI version.
 
 	Example: >
 		function ImStatusFunc()
@@ -4538,7 +4553,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	set and to the Vim default value when 'compatible' is reset.
 
 						*'isprint'* *'isp'*
-'isprint' 'isp'	string	(default for Win32 and Macintosh:
+'isprint' 'isp'	string	(default for Win32 and macOS:
 				"@,~-255"; otherwise: "@,161-255")
 			global
 	The characters given by this option are displayed directly on the
@@ -4915,18 +4930,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'macatsui'* *'nomacatsui'*
 'macatsui'		boolean	(default on)
 			global
-			{only available in Mac GUI version}
-	This is a workaround for when drawing doesn't work properly.  When set
-	and compiled with multi-byte support ATSUI text drawing is used.  When
-	not set ATSUI text drawing is not used.  Switch this option off when
-	you experience drawing problems.  In a future version the problems may
-	be solved and this option becomes obsolete.  Therefore use this method
-	to unset it: >
-		if exists('&macatsui')
-		   set nomacatsui
-		endif
-<	Another option to check if you have drawing problems is
-	'termencoding'.
+			{not supported}
+	No longer supported, as the Mac OS X GUI code was removed.
 
 						*'magic'* *'nomagic'*
 'magic'			boolean	(default on)
@@ -5232,7 +5237,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 <	If your terminal can't overrule the mouse events going to the
 	application, use: >
 		:set mouse=nvi
-<	The you can press ":", select text for the system, and press Esc to go
+<	Then you can press ":", select text for the system, and press Esc to go
 	back to Vim using the mouse events.
 	In |defaults.vim| "nvi" is used if the 'term' option is not matching
 	"xterm".
@@ -5427,6 +5432,15 @@ A jump table for the options with a short description can be found at |Q_op|.
 	bin	If included, numbers starting with "0b" or "0B" will be
 		considered to be binary.  Example: Using CTRL-X on
 		"0b1000" subtracts one, resulting in "0b0111".
+	unsigned    If included, numbers are recognized as unsigned. Thus a
+		leading dash or negative sign won't be considered as part of
+		the number.  Examples:
+		    Using CTRL-X on "2020" in "9-2020" results in "9-2019"
+		    (without "unsigned" it would become "9-2021").
+		    Using CTRL-A on "2020" in "9-2020" results in "9-2021"
+		    (without "unsigned" it would become "9-2019").
+		    Using CTRL-X on "0" or CTRL-A on "18446744073709551615"
+		    (2^64 - 1) has no effect, overflow is prevented.
 	Numbers which simply begin with a digit in the range 1-9 are always
 	considered decimal.  This also happens for numbers that are not
 	recognized as octal or hex.
@@ -5889,6 +5903,22 @@ A jump table for the options with a short description can be found at |Q_op|.
 	'pyxversion' has no effect.  The pyx* functions and commands are
 	always the same as the compiled version.
 
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
+
+						*'quickfixtextfunc'* *'qftf'*
+'quickfixtextfunc' 'qftf'	string (default "")
+			global
+			{only available when compiled with the |+quickfix|
+			feature}
+	This option specifies a function to be used to get the text to display
+	in the quickfix and location list windows.  This can be used to
+	customize the information displayed in the quickfix or location window
+	for each entry in the corresponding quickfix or location list.  See
+	|quickfix-window-function| for an explanation of how to write the
+	function and an example. The value can be the name of a function or a
+	lambda.
+
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
@@ -6164,7 +6194,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	screen.  If the statusline is given by 'statusline' (i.e. not empty),
 	this option takes precedence over 'ruler' and 'rulerformat'
 	If the number of characters displayed is different from the number of
-	bytes in the text (e.g., for a TAB or a multi-byte character), both
+	bytes in the text (e.g., for a TAB or a multibyte character), both
 	the text column (byte number) and the screen column are shown,
 	separated with a dash.
 	For an empty line "0-1" is shown.
@@ -6207,7 +6237,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 						$VIMRUNTIME,
 						$VIM/vimfiles/after,
 						$HOME/vimfiles/after"
-					Macintosh: "$VIM:vimfiles,
+					macOS: "$VIM:vimfiles,
 						$VIMRUNTIME,
 						$VIM:vimfiles:after"
 					Haiku: "$BE_USER_SETTINGS/vim,
@@ -6537,7 +6567,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	For the Amiga the default is ">".  For MS-Windows the default is
 	">%s 2>&1".  The output is directly saved in a file and not echoed to
 	the screen.
-	For Unix the default it "| tee".  The stdout of the compiler is saved
+	For Unix the default is "| tee".  The stdout of the compiler is saved
 	in a file and echoed to the screen.  If the 'shell' option is "csh" or
 	"tcsh" after initializations, the default becomes "|& tee".  If the
 	'shell' option is "sh", "ksh", "mksh", "pdksh", "zsh", "zsh-beta",
@@ -6706,7 +6736,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	 flag	meaning when present	~
 	  f	use "(3 of 5)" instead of "(file 3 of 5)"
 	  i	use "[noeol]" instead of "[Incomplete last line]"
-	  l	use "999L, 888C" instead of "999 lines, 888 characters"
+	  l	use "999L, 888B" instead of "999 lines, 888 bytes"
 	  m	use "[+]" instead of "[Modified]"
 	  n	use "[New]" instead of "[New File]"
 	  r	use "[RO]" instead of "[readonly]"
@@ -7081,6 +7111,16 @@ A jump table for the options with a short description can be found at |Q_op|.
 	up to the first character that is not an ASCII letter or number and
 	not a dash.  Also see |set-spc-auto|.
 
+						*'spelloptions'* *'spo'*
+'spelloptions' 'spo'	string	(default "")
+			local to buffer
+			{not available when compiled without the |+syntax|
+			feature}
+	A comma separated list of options for spell checking:
+	   camel	When a word is CamelCased, assume "Cased" is a
+			separate word: every upper-case character in a word
+			that comes after a lower case character indicates the
+			start of a new word.
 
 						*'spellsuggest'* *'sps'*
 'spellsuggest' 'sps'	string	(default "best")
@@ -7251,8 +7291,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	N N   Printer page number.  (Only works in the 'printheader' option.)
 	l N   Line number.
 	L N   Number of lines in buffer.
-	c N   Column number.
-	v N   Virtual column number.
+	c N   Column number (byte index).
+	v N   Virtual column number (screen column).
 	V N   Virtual column number as -{num}.  Not displayed if equal to 'c'.
 	p N   Percentage through file in lines as in |CTRL-G|.
 	P S   Percentage through file of displayed window.  This is like the
@@ -7672,10 +7712,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 'term'			string	(default is $TERM, if that fails:
 				      in the GUI: "builtin_gui"
 					on Amiga: "amiga"
-					 on BeOS: "beos-ansi"
 					on Haiku: "xterm"
 					  on Mac: "mac-ansi"
-					 on MiNT: "vt52"
 					 on Unix: "ansi"
 					  on VMS: "ansi"
 				       on Win 32: "win32")
@@ -7703,14 +7741,12 @@ A jump table for the options with a short description can be found at |Q_op|.
 	For further details see |arabic.txt|.
 
 					*'termencoding'* *'tenc'*
-'termencoding' 'tenc'	string	(default ""; with GTK+ GUI: "utf-8"; with
-						    Macintosh GUI: "macroman")
+'termencoding' 'tenc'	string	(default ""; with GTK+ GUI: "utf-8")
 			global
 	Encoding used for the terminal.  This specifies what character
 	encoding the keyboard produces and the display will understand.  For
 	the GUI it only applies to the keyboard ('encoding' is used for the
-	display).  Except for the Mac when 'macatsui' is off, then
-	'termencoding' should be "macroman".
+	display).
 								*E617* *E950*
 	Note: This does not apply to the GTK+ GUI.  After the GUI has been
 	successfully initialized, 'termencoding' is forcibly set to "utf-8".
@@ -7775,8 +7811,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 						*'termwinsize'* *'tws'*
 'termwinsize' 'tws'	string	(default "")
 			local to window
-	Size of the |terminal| window.  Format: {rows}x{columns} or
-	{rows}*{columns}.
+	Size used when opening the |terminal| window.  Format:
+		{rows}x{columns} or {rows}*{columns}.
 	- When empty the terminal gets the size from the window.
 	- When set with a "x" (e.g., "24x80") the terminal size is not
 	  adjusted to the window size.  If the window is smaller only the
@@ -7787,6 +7823,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	- When rows is zero then use the height of the window.
 	- When columns is zero then use the width of the window.
 	- Using "0x0" or "0*0" is the same as empty.
+	- Can be overruled in the |term_start()| options with "term_rows" and
+	  "term_cols".
 
 	Examples:
 	  "30x0" uses 30 rows and the current window width.
@@ -8331,7 +8369,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 	>= 12	Every executed function.
 	>= 13	When an exception is thrown, caught, finished, or discarded.
 	>= 14	Anything pending in a ":finally" clause.
-	>= 15	Every executed Ex command (truncated at 200 characters).
+	>= 15	Every executed Ex command from a script (truncated at 200
+		characters).
+	>= 16	Every executed Ex command.
 
 	This option can also be set with the "-V" argument.  See |-V|.
 	This option is also set by the |:verbose| command.
@@ -8354,7 +8394,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 'viewdir' 'vdir'	string	(default for Amiga and Win32:
 							 "$VIM/vimfiles/view",
 				 for Unix: "~/.vim/view",
-				 for Macintosh: "$VIM:vimfiles:view"
+				 for macOS: "$VIM:vimfiles:view"
 				 for VMS: "sys$login:vimfiles/view")
 			global
 			{not available when compiled without the |+mksession|
@@ -8521,8 +8561,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 					    *'virtualedit'* *'ve'*
 'virtualedit' 've'	string	(default "")
 			global
-			{not available when compiled without the
-			|+virtualedit| feature}
 	A comma separated list of these words:
 	    block	Allow virtual editing in Visual block mode.
 	    insert	Allow virtual editing in Insert mode.
@@ -8872,7 +8910,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 			{only available when compiled with the |terminal|
 			feature on MS-Windows}
 	Specifies the name of the winpty shared library, used for the
-	|:terminal| command. The default depends on whether was build as a
+	|:terminal| command. The default depends on whether Vim was built as a
 	32-bit or 64-bit executable.  If not found, "winpty.dll" is tried as
 	a fallback.
 	Environment variables are expanded |:set_env|.

runtime/doc/os_beos.txt

@@ -1,320 +1,13 @@
-*os_beos.txt*	For Vim version 8.2.  Last change: 2016 Mar 28
+*os_beos.txt*	For Vim version 8.2.  Last change: 2020 Jun 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
 
 
-							*BeOS* *BeBox*
-This is a port of Vim 5.1 to the BeOS Preview Release 2 (also known as PR2)
-or later.
+						*beos* *BeOS* *BeBox*
+This file used to contain particularities for the BeOS port of Vim.
 
-This file contains the particularities for the BeBox/BeOS version of Vim.  For
-matters not discussed in this file, Vim behaves very much like the Unix
-|os_unix.txt| version.
+The BeOS support was removed in patch 8.2.0849.
 
- 1. General			|beos-general|
- 2. Compiling Vim		|beos-compiling|
- 3. Timeout in the Terminal	|beos-timeout|
- 4. Unicode vs. Latin1		|beos-unicode|
- 5. The BeOS GUI		|beos-gui|
- 6. The $VIM directory		|beos-vimdir|
- 7. Drag & Drop			|beos-dragndrop|
- 8. Single Launch vs. Multiple
-    Launch			|beos-launch|
- 9. Fonts			|beos-fonts|
-10. The meta key modifier	|beos-meta|
-11. Mouse key mappings		|beos-mouse|
-12. Color names			|beos-colors|
-13. Compiling with Perl		|beos-perl|
-
-
-1. General						*beos-general*
-
-The default syntax highlighting mostly works with different foreground colors
-to highlight items.  This works best if you set your Terminal window to a
-darkish background and light letters.  Some middle-grey background (for
-instance (r,g,b)=(168,168,168)) with black letters also works nicely.  If you
-use the default light background and dark letters, it may look better to
-simply reverse the notion of foreground and background color settings.  To do
-this, add this to your .vimrc file (where <Esc> may need to be replaced with
-the escape character): >
-
-  :if &term == "beos-ansi"
-  :    set t_AB=<Esc>[3%dm
-  :    set t_AF=<Esc>[4%dm
-  :endif
-
-
-2. Compiling Vim					*beos-compiling*
-
-From the Advanced Access Preview Release (AAPR) on, Vim can be configured with
-the standard configure script.  To get the compiler and its flags right, use
-the following command-line in the shell (you can cut and paste it in one go):
-
-CC=$BE_C_COMPILER CFLAGS="$BE_DEFAULT_C_FLAGS -O7" \
-    ./configure --prefix=/boot/home/config
-
-$BE_C_COMPILER is usually "mwcc", $BE_DEFAULT_C_FLAGS is usually "-I- -I."
-
-When configure has run, and you wish to enable GUI support, you must edit the
-config.mk file so that the lines with GUI_xxx refer to $(BEOSGUI_xxx) instead
-of $(NONE_xxx).
-Alternatively you can make this change in the Makefile; it will have a
-more permanent effect.  Search for "NONE_".
-
-After compilation you need to add the resources to the binary.  Add the
-following few lines near the end (before the line with "exit $exit_value") of
-the link.sh script to do this automatically.
-
-    rmattr BEOS:TYPE vim
-    copyres os_beos.rsrc vim
-    mimeset vim
-
-Also, create a dummy file "strip":
-
-    #!/bin/sh
-    mimeset $1
-    exit 0
-
-You will need it when using "make install" to install Vim.
-
-Now type "make" to compile Vim, then "make install" to install it.
-
-If you want to install Vim by hand, you must copy Vim to $HOME/config/bin, and
-create a bunch of symlinks to it ({g,r,rg}{vim,ex,view}).  Furthermore you must
-copy Vim's configuration files to $HOME/config/share/vim:
-vim-5.0s/{*.vim,doc,syntax}.  For completeness, you should also copy the nroff
-manual pages to $HOME/config/man/man1.  Don't forget ctags/ctags and xxd/xxd!
-
-Obviously, you need the unlimited linker to actually link Vim.  See
-http://www.metrowerks.com for purchasing the CodeWarrior compiler for BeOS.
-There are currently no other linkers that can do the job.
-
-This won't be able to include the Perl or Python interfaces even if
-you have the appropriate files installed. |beos-perl|
-
-
-3. Timeout in the Terminal				*beos-timeout*
-
-Because some POSIX/UNIX features are still missing[1], there is no direct OS
-support for read-with-timeout in the Terminal.  This would mean that you cannot
-use :mappings of more than one character, unless you also :set notimeout.
-|'timeout'|
-
-To circumvent this problem, I added a workaround to provide the necessary
-input with timeout by using an extra thread which reads ahead one character.
-As a side effect, it also makes Vim recognize when the Terminal window
-resizes.
-
-Function keys are not supported in the Terminal since they produce very
-indistinctive character sequences.
-
-These problems do not exist in the GUI.
-
-[1]: there is no select() on file descriptors; also the termios VMIN and VTIME
-settings do not seem to work properly.  This has been the case since DR7 at
-least and still has not been fixed as of PR2.
-
-							*beos-unicode*
-4. Unicode vs. Latin1					*beos-utf8*
-
-BeOS uses Unicode and UTF-8 for text strings (16-bit characters encoded to
-8-bit characters).  Vim assumes ISO-Latin1 or other 8-bit character codes.
-This does not produce the desired results for non-ASCII characters.  Try the
-command :digraphs to see.  If they look messed up, use :set isprint=@ to
-(slightly) improve the display of ISO-Latin1 characters 128-255.  This works
-better in the GUI, depending on which font you use (below).
-
-You may also use the /boot/bin/xtou command to convert UTF-8 files from (xtou
--f iso1 filename) or to (xtou -t iso1 filename) ISO-Latin1 characters.
-
-
-5. The BeOS GUI						*beos-gui*
-
-The BeOS GUI is no longer included.  It was not maintained for a while and
-most likely didn't work.  If you want to work on this: get the Vim 6.x version
-and merge it back in.
-
-
-6. The $VIM directory					*beos-vimdir*
-
-$VIM is the symbolic name for the place where Vim's support files are stored.
-The default value for $VIM is set at compile time and can be determined with >
-
-  :version
-
-The normal value is /boot/home/config/share/vim.  If you don't like it you can
-set the VIM environment variable to override this, or set 'helpfile' in your
-.vimrc: >
-
-  :if version >= 500
-  :    set helpfile=~/vim/vim54/doc/help.txt
-  :    syntax on
-  :endif
-
-
-7. Drag & Drop						*beos-dragndrop*
-
-You can drop files and directories on either the Vim icon (starts a new Vim
-session, unless you use the File Types application to set Vim to be "Single
-Launch") or on the Vim window (starts editing the files).  Dropping a folder
-sets Vim's current working directory. |:cd| |:pwd| If you drop files or
-folders with either SHIFT key pressed, Vim changes directory to the folder
-that contains the first item dropped.  When starting Vim, there is no need to
-press shift: Vim behaves as if you do.
-
-Files dropped set the current argument list. |argument-list|
-
-
-8. Single Launch vs. Multiple Launch			*beos-launch*
-
-As distributed Vim's Application Flags (as seen in the FileTypes preference)
-are set to Multiple Launch.  If you prefer, you can set them to Single Launch
-instead.  Attempts to start a second copy of Vim will cause the first Vim to
-open the files instead.  This works from the Tracker but also from the command
-line.  In the latter case, non-file (option) arguments are not supported.
-
-NB: Only the GUI version has a BApplication (and hence Application Flags).
-This section does not apply to the GUI-less version, should you compile one.
-
-
-9. Fonts						*beos-fonts*
-
-Set fonts with >
-
-  :set guifont=Courier10_BT/Roman/10
-
-where the first part is the font family, the second part the style, and the
-third part the size.  You can use underscores instead of spaces in family and
-style.
-
-Best results are obtained with monospaced fonts (such as Courier).  Vim
-attempts to use all fonts in B_FIXED_SPACING mode but apparently this does not
-work for proportional fonts (despite what the BeBook says).
-
-Vim also tries to use the B_ISO8859_1 encoding, also known as ISO Latin 1.
-This also does not work for all fonts.  It does work for Courier, but not for
-ProFontISOLatin1/Regular (strangely enough).  You can verify this by giving the >
-
-  :digraphs
-
-command, which lists a bunch of characters with their ISO Latin 1 encoding.
-If, for instance, there are "box" characters among them, or the last character
-isn't a dotted-y, then for this font the encoding does not work.
-
-If the font you specify is unavailable, you get the system fixed font.
-
-Standard fixed-width system fonts are:
-
-	      ProFontISOLatin1/Regular
-		  Courier10_BT/Roman
-		  Courier10_BT/Italic
-		  Courier10_BT/Bold
-		  Courier10_BT/Bold_Italic
-
-Standard proportional system fonts are:
-
-		    Swis721_BT/Roman
-		    Swis721_BT/Italic
-		    Swis721_BT/Bold
-		    Swis721_BT/Bold_Italic
-		Dutch801_Rm_BT/Roman
-		Dutch801_Rm_BT/Italic
-		Dutch801_Rm_BT/Bold
-		Dutch801_Rm_BT/Bold_Italic
-		   Baskerville/Roman
-		   Baskerville/Italic
-		   Baskerville/Bold
-		   Baskerville/Bold_Italic
-		 SymbolProp_BT/Regular
-
-Try some of them, just for fun.
-
-
-10. The meta key modifier				*beos-meta*
-
-The META key modifier is obtained by the left or right OPTION keys.  This is
-because the ALT (aka COMMAND) keys are not passed to applications.
-
-
-11. Mouse key mappings					*beos-mouse*
-
-Vim calls the various mouse buttons LeftMouse, MiddleMouse and RightMouse.  If
-you use the default Mouse preference settings these names indeed correspond to
-reality.  Vim uses this mapping:
-
-    Button 1 -> LeftMouse,
-    Button 2 -> RightMouse,
-    Button 3 -> MiddleMouse.
-
-If your mouse has fewer than 3 buttons you can provide your own mapping from
-mouse clicks with modifier(s) to other mouse buttons.  See the swapmouse
-package for an example:					 |gui-mouse-mapping|
-$VIMRUNTIME/pack/dist/opt/swapmouse/plugin/swapmouse.vim
-
-
-12. Color names						*beos-colors*
-
-Vim has a number of color names built-in.  Additional names are read from the
-file $VIMRUNTIME/rgb.txt, if present.  This file is basically the color
-database from X.  Names used from this file are cached for efficiency.
-
-
-13. Compiling with Perl					*beos-perl*
-
-Compiling with Perl support enabled is slightly tricky.  The Metrowerks
-compiler has some strange ideas where to search for include files.  Since
-several include files with Perl have the same names as some Vim header
-files, the wrong ones get included.  To fix this, run the following Perl
-script while in the vim-5.0/src directory: >
-
-   preproc.pl > perl.h
-
-    #!/bin/env perl
-    # Simple #include expander, just good enough for the Perl header files.
-
-    use strict;
-    use IO::File;
-    use Config;
-
-    sub doinclude
-    {
-	my $filename = $_[0];
-	my $fh = new IO::File($filename, "r");
-	if (defined $fh) {
-	    print "/* Start of $filename */\n";
-
-	    while (<$fh>) {
-		if (/^#include "(.*)"/) {
-		    doinclude($1);
-		    print "/* Back in $filename */\n";
-		} else {
-		    print $_;
-		}
-	    }
-	    print "/* End of $filename */\n";
-
-	    undef $fh;
-	} else {
-	    print "/* Cannot open $filename */\n";
-	    print "#include \"$filename\"\n";
-	}
-    }
-
-    chdir     $Config{installarchlib}."/CORE";
-    doinclude "perl.h";
-
-It expands the "perl.h" header file, using only other Perl header files.
-
-Now you can configure & make Vim with the --enable-perlinterp option.
-Be warned though that this adds about 616 kilobytes to the size of Vim!
-Without Perl, Vim with default features and GUI is about 575K, with Perl
-it is about 1191K.
-
--Olaf Seibert
-
-[Note: these addresses no longer work:]
-<rhialto@polder.ubc.kun.nl>
-http://polder.ubc.kun.nl/~rhialto/be
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_haiku.txt

@@ -1,4 +1,4 @@
-*os_haiku.txt*	For Vim version 8.2.  Last change: 2020 Apr 30
+*os_haiku.txt*	For Vim version 8.2.  Last change: 2020 May 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -84,9 +84,6 @@ Stuff that does not work yet:
   in when the window is activated or deactivated (so it works best with focus-
   follows-mouse turned on).
 - The cursor does not flash.
-- Built-in terminal is not available in GUI, and does not work reliably on
-  console version as well; e.g. it is not possible to exit using the 'exit'
-  command.  If you need to use it, enable at your own risk.
 
 
 4. The $VIM directory					*haiku-vimdir*

runtime/doc/os_mint.txt

@@ -1,39 +1,15 @@
-*os_mint.txt*   For Vim version 8.2.  Last change: 2005 Mar 29
+*os_mint.txt*   For Vim version 8.2.  Last change: 2020 Jul 14
 
 
 		  VIM REFERENCE MANUAL    by Jens M. Felderhoff
 
 
 							*MiNT* *Atari*
-This file contains the particularities for the Atari MiNT version of Vim.
+The Atari MiNT support was removed with patch 8.2.1215. It probably didn't
+work at that time, since the code was old and not maintained.
 
-For compiling Vim on the Atari running MiNT see "INSTALL" and "Makefile"
-in the src directory.
 
-Vim for MiNT behaves almost exactly like the Unix version.
-The Unix behavior described in the documentation also refers to the
-MiNT version of Vim unless explicitly stated otherwise.
+Originally added by: Jens M. Felderhoff, e-mail: <jmf@infko.uni-koblenz.de>
 
-For wildcard expansion of <~> (home directory) you need a shell that
-expands the tilde.  The vanilla Bourne shell doesn't recognize it.
-With csh and ksh it should work OK.
-
-The MiNT version of vim needs the termcap file /etc/termcap with the
-terminal capabilities of your terminal.  Builtin termcaps are
-supported for the vt52 terminal.  Termcap entries for the TOSWIN window
-manager and the virtual console terminals have been appended to the
-termcap file that comes with the Vim distribution.
-
-If you should encounter problems with swapped <BS> and <Del> keys, see
-|:fixdel|.
-
-Because terminal updating under MiNT is often slow (e.g. serial line
-terminal), the 'showcmd' and 'ruler' options are default off.
-If you have a fast terminal, try setting them on.  You might
-also want to set 'ttyfast'.
-
-Send bug reports to
-
-	Jens M. Felderhoff, e-mail: <jmf@infko.uni-koblenz.de>
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_unix.txt

@@ -30,8 +30,8 @@ can be changed at compile time.
 
 Because terminal updating under Unix is often slow (e.g. serial line
 terminal, shell window in suntools), the 'showcmd' and 'ruler' options
-are default off.  If you have a fast terminal, try setting them on.  You might
-also want to set 'ttyfast'.
+are off by default.  If you have a fast terminal, try setting them on.  You
+might also want to set 'ttyfast'.
 
 When using Vim in an xterm the mouse clicks can be used by Vim by setting
 'mouse' to "a".  If there is access to an X-server gui style copy/paste will

runtime/doc/os_vms.txt

@@ -1,4 +1,4 @@
-*os_vms.txt*    For Vim version 8.2.  Last change: 2019 Jan 29
+*os_vms.txt*    For Vim version 8.2.  Last change: 2020 Jun 07
 
 
 		  VIM REFERENCE MANUAL
@@ -88,7 +88,7 @@ VAX C compiler is not fully ANSI C compatible in pre-processor directives
 semantics, therefore you have to use a converter program that will do the lion
 part of the job.  For detailed instructions read file INSTALLvms.txt
 
-MMS_VIM.EXE is build together with VIM.EXE, but for XXD.EXE you should
+MMS_VIM.EXE is built together with VIM.EXE, but for XXD.EXE you should
 change to a subdirectory and build it separately.
 
 CTAGS is not part of the Vim source distribution anymore, however the OpenVMS
@@ -432,7 +432,6 @@ Terminal entry not found in termcap
     builtin_gui
     builtin_riscos
     builtin_amiga
-    builtin_beos-ansi
     builtin_ansi
     builtin_vt320
     builtin_vt52

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 8.2.  Last change: 2019 Dec 07
+*pattern.txt*   For Vim version 8.2.  Last change: 2020 Sep 01
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -797,11 +797,12 @@ An ordinary atom can be:
 	^beep(		the start of the C function "beep" (probably).
 
 							*/\^*
-\^	Matches literal '^'.  Can be used at any position in the pattern.
+\^	Matches literal '^'.  Can be used at any position in the pattern, but
+	not inside [].
 
 							*/\_^*
 \_^	Matches start-of-line. |/zero-width|  Can be used at any position in
-	the pattern.
+	the pattern, but not inside [].
 	Example		matches ~
 	\_s*\_^foo	white space and blank lines and then "foo" at
 			start-of-line
@@ -812,12 +813,13 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	|/zero-width|
 
 							*/\$*
-\$	Matches literal '$'.  Can be used at any position in the pattern.
+\$	Matches literal '$'.  Can be used at any position in the pattern, but
+	not inside [].
 
 							*/\_$*
 \_$	Matches end-of-line. |/zero-width|  Can be used at any position in the
-	pattern.  Note that "a\_$b" never matches, since "b" cannot match an
-	end-of-line.  Use "a\nb" instead |/\n|.
+	pattern, but not inside [].  Note that "a\_$b" never matches, since
+	"b" cannot match an end-of-line.  Use "a\nb" instead |/\n|.
 	Example		matches ~
 	foo\_$\_s*	"foo" at end-of-line and following white space and
 			blank lines
@@ -840,8 +842,9 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	|/zero-width|
 
 							*/\zs*
-\zs	Matches at any position, and sets the start of the match there: The
-	next char is the first char of the whole match. |/zero-width|
+\zs	Matches at any position, but not inside [], and sets the start of the
+	match there: The next char is the first char of the whole match.
+	|/zero-width|
 	Example: >
 		/^\s*\zsif
 <	matches an "if" at the start of a line, ignoring white space.
@@ -852,8 +855,9 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	This cannot be followed by a multi. *E888*
 	{not available when compiled without the |+syntax| feature}
 							*/\ze*
-\ze	Matches at any position, and sets the end of the match there: The
-	previous char is the last char of the whole match. |/zero-width|
+\ze	Matches at any position, but not inside [], and sets the end of the
+	match there: The previous char is the last char of the whole match.
+	|/zero-width|
 	Can be used multiple times, the last one encountered in a matching
 	branch is used.
 	Example: "end\ze\(if\|for\)" matches the "end" in "endif" and
@@ -939,7 +943,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	These three can be used to match specific columns in a buffer or
 	string.  The "23" can be any column number.  The first column is 1.
 	Actually, the column is the byte number (thus it's not exactly right
-	for multi-byte characters).
+	for multibyte characters).
 	WARNING: When inserting or deleting text Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
 	wrong.
@@ -994,7 +998,7 @@ Character classes:
 \p	printable character (see 'isprint' option)	*/\p*
 \P	like "\p", but excluding digits			*/\P*
 
-NOTE: the above also work for multi-byte characters.  The ones below only
+NOTE: the above also work for multibyte characters.  The ones below only
 match ASCII characters, as indicated by the range.
 
 						*whitespace* *white-space*
@@ -1131,9 +1135,9 @@ x	A single character, with no special meaning, matches itself
 	  a list of at least one character, each of which is either '-', '.',
 	  '/', alphabetic, numeric, '_' or '~'.
 	  These items only work for 8-bit characters, except [:lower:] and
-	  [:upper:] also work for multi-byte characters when using the new
+	  [:upper:] also work for multibyte characters when using the new
 	  regexp engine.  See |two-engines|.  In the future these items may
-	  work for multi-byte characters.  For now, to get all "alpha"
+	  work for multibyte characters.  For now, to get all "alpha"
 	  characters you can use: [[:lower:][:upper:]].
 
 	  The "Func" column shows what library function is used.  The
@@ -1257,8 +1261,8 @@ When working with expression evaluation, a <NL> character in the pattern
 matches a <NL> in the string.  The use of "\n" (backslash n) to match a <NL>
 doesn't work there, it only works to match text in the buffer.
 
-						*pattern-multi-byte*
-Patterns will also work with multi-byte characters, mostly as you would
+				*pattern-multi-byte* *pattern-multibyte*
+Patterns will also work with multibyte characters, mostly as you would
 expect.  But invalid bytes may cause trouble, a pattern with an invalid byte
 will probably never match.
 
@@ -1279,7 +1283,7 @@ not match in "càt" (where the a has the composing character 0x0300), but
 0xe1, it does not have a compositing character).  It does match "cat" (where
 the a is just an a).
 
-When a composing character appears at the start of the pattern of after an
+When a composing character appears at the start of the pattern or after an
 item that doesn't include the composing character, a match is found at any
 character that includes this composing character.
 

runtime/doc/pi_netrw.txt

@@ -1,4 +1,4 @@
-*pi_netrw.txt*  For Vim version 8.2.  Last change: 2020 Jan 14
+*pi_netrw.txt*  For Vim version 8.2.  Last change: 2020 Sep 19
 
 	    ------------------------------------------------
 	    NETRW REFERENCE MANUAL    by Charles E. Campbell
@@ -437,9 +437,13 @@ settings are described below, in |netrw-browser-options|, and in
   *g:netrw_silent*	=0 : transfers done normally
 			=1 : transfers done silently
 
- *g:netrw_use_errorwindow* =1 : messages from netrw will use a separate one
+ *g:netrw_use_errorwindow* =2: messages from netrw will use a popup window
+			     Move the mouse and pause to remove the popup window.
+			     (default value if popup windows are availble)
+			 =1 : messages from netrw will use a separate one
 			      line window.  This window provides reliable
-			      delivery of messages. (default)
+			      delivery of messages.
+			     (default value if popup windows are not availble)
 			 =0 : messages from netrw will use echoerr ;
 			      messages don't always seem to show up this
 			      way, but one doesn't have to quit the window.
@@ -725,6 +729,8 @@ just as easily as if they were local files! >
 See |netrw-activate| for more on how to encourage your vim to use plugins
 such as netrw.
 
+For password-free use of scp:, see |netrw-ssh-hack|.
+
 
 ==============================================================================
 7. Ex Commands						*netrw-ex* {{{1
@@ -1063,7 +1069,7 @@ QUICK HELP						*netrw-quickhelp* {{{2
 	  Reverse sorting order.........................|netrw-r|
 
 
-				*netrw-quickmap* *netrw-quickmaps*
+				*netrw-quickmap*  *netrw-quickmaps*
 QUICK REFERENCE: MAPS				*netrw-browse-maps* {{{2
 >
 	  ---			-----------------			----
@@ -1080,7 +1086,7 @@ QUICK REFERENCE: MAPS				*netrw-browse-maps* {{{2
 	   a	Cycles between normal display,                       |netrw-a|
 	    	hiding (suppress display of files matching g:netrw_list_hide)
 	    	and showing (display only files which match g:netrw_list_hide)
-	   c	Make browsing directory the current directory        |netrw-c|
+	   cd	Make browsing directory the current directory        |netrw-cd|
 	   C	Setting the editing window                           |netrw-C|
 	   d	Make a directory                                     |netrw-d|
 	   D	Attempt to remove the file(s)/directory(ies)         |netrw-D|
@@ -2098,7 +2104,7 @@ the two directories the same, use the "cd" map (type cd).  That map will
 set Vim's notion of the current directory to netrw's current browsing
 directory.
 
-*netrw-c* : This map's name has been changed from "c" to cd (see |netrw-cd|).
+|netrw-cd|: This map's name was changed from "c" to cd (see |netrw-cd|).
           This change was done to allow for |netrw-cb| and |netrw-cB| maps.
 
 Associated setting variable: |g:netrw_keepdir|
@@ -2753,7 +2759,7 @@ your browsing preferences.  (see also: |netrw-settings|)
 				=0 keep the current directory the same as the
 				   browsing directory.
 				The current browsing directory is contained in
-				b:netrw_curdir (also see |netrw-c|)
+				b:netrw_curdir (also see |netrw-cd|)
 
   *g:netrw_keepj*		="keepj" (default) netrw attempts to keep the
 				         |:jumps| table unaffected.
@@ -3124,7 +3130,8 @@ a file using the local browser (by putting the cursor on it) and pressing
 
 Related topics:
  * To see what the current directory is, use |:pwd|
- * To make the currently browsed directory the current directory, see |netrw-c|
+ * To make the currently browsed directory the current directory, see
+   |netrw-cd|
  * To automatically make the currently browsed directory the current
    directory, see |g:netrw_keepdir|.
 
@@ -3799,9 +3806,15 @@ netrw:
 	   or
 	     http://vim.sourceforge.net/scripts/script.php?script_id=120
 
-	  Decho.vim is provided as a "vimball"; see |vimball-intro|.
+	  Decho.vim is provided as a "vimball"; see |vimball-intro|.  You
+	  should edit the Decho.vba.gz file and source it in: >
 
-	2. Edit the <netrw.vim> file by typing: >
+	  	vim Decho.vba.gz
+		:so %
+		:q
+<
+	2. To turn on debug tracing in netrw, then edit the <netrw.vim>
+	   file by typing: >
 
 		vim netrw.vim
 		:DechoOn
@@ -3823,14 +3836,34 @@ netrw:
 	   read/write your file over the network in a separate tab or
 	   server vim window.
 
-	   To save the file, use >
+	   Change the netrw.vimrc file to include the Decho plugin: >
+
+		set nocp
+		so $HOME/.vim/plugin/Decho.vim
+		so $HOME/.vim/plugin/netrwPlugin.vim
+<
+	   You should continue to run vim with >
+
+		vim -u netrw.vimrc --noplugins -i NONE [some path here]
+<
+	   to avoid entanglements with options and other plugins.
+
+	   To save the file: under linux, the output will be in a separate
+	   remote server window; in it, just save the file with >
+
+	   	:w! DBG
+
+<	   Under a vim that doesn't support clientserver, your debugging
+	   output will appear in another tab: >
 
 		:tabnext
 		:set bt=
 		:w! DBG
+<
+	   Furthermore, it'd be helpful if you would type >
 
-<	   Furthermore, it'd be helpful if you would type >
 		:Dsep <command>
+
 <	   where <command> is the command you're about to type next,
 	   thereby making it easier to associate which part of the
 	   debugging trace is due to which command.
@@ -3838,17 +3871,34 @@ netrw:
 	   Please send that information to <netrw.vim>'s maintainer along
 	   with the o/s you're using and the vim version that you're using
 	   (see |:version|)  (remove the embedded NOSPAM first) >
+
 		NcampObell@SdrPchip.AorgM-NOSPAM
 <
 ==============================================================================
 12. History						*netrw-history* {{{1
 
+	v170:	Mar 11, 2020	* (reported by Reiner Herrmann) netrw+tree
+				  would not hide with the ^\..* pattern
+				  correctly.
+				* (Marcin Szamotulski) NetrwOptionRestore
+				  did not restore options correctly that
+				  had a single quote in the option string.
+		Apr 13, 2020	* implemented error handling via popup
+				  windows (see |popup_beval()|)
+		Apr 30, 2020	* (reported by Manatsu Takahashi) while
+				  using Lexplore, a modified file could
+				  be overwritten.  Sol'n: will not overwrite,
+				  but will emit an |E37| (although one cannot
+				  add an ! to override)
+		Jun 07, 2020	* (reported by Jo Totland) repeatedly invoking
+				  :Lexplore and quitting it left unused
+				  hidden buffers.  Netrw will now set netrw
+				  buffers created by :Lexplore to |bh|=wipe.
 	v169:	Dec 20, 2019	* (reported by amkarthik) that netrw's x
 				  (|netrw-x|) would throw an error when
 				  attempting to open a local directory.
 	v168:	Dec 12, 2019	* scp timeout error message not reported,
 				  hopefully now fixed (Shane Xb Qian)
-
 	v167:	Nov 29, 2019	* netrw does a save&restore on @* and @+.
 				  That causes problems with the clipboard.
 				  Now restores occurs only if @* or @+ have
@@ -4306,4 +4356,4 @@ netrw:
 
 ==============================================================================
 Modelines: {{{1
- vim:tw=78:ts=8:noet:ft=help:norl:fdm=marker
+vim:tw=78:ts=8:ft=help:noet:norl:fdm=marker

runtime/doc/popup.txt

@@ -1,4 +1,4 @@
-*popup.txt*  For Vim version 8.2.  Last change: 2020 May 12
+*popup.txt*  For Vim version 8.2.  Last change: 2020 Sep 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -74,9 +74,9 @@ wrapping, lines in the buffer.  It can be limited with the "maxheight"
 property.  You can use empty lines to increase the height or the "minheight"
 property.
 
-The width of the window is normally equal to the longest line in the buffer.
-It can be limited with the "maxwidth" property.  You can use spaces to
-increase the width or use the "minwidth" property.
+The width of the window is normally equal to the longest visible line in the
+buffer.  It can be limited with the "maxwidth" property.  You can use spaces
+to increase the width or use the "minwidth" property.
 
 By default the 'wrap' option is set, so that no text disappears.  Otherwise,
 if there is not enough space then the window is shifted left in order to
@@ -150,7 +150,7 @@ different:						*E863*
 - When the job ends, the popup window closes.
 - The popup window can be closed with `popup_close()`, the terminal buffer
   then becomes hidden.
-- It is not possible to enter Terminal-Normal mode.
+- It is not possible to open a second popup window with a terminal. *E861*
 - The default Pmenu color is only used for the border and padding.  To change
   the color of the terminal itself set the Terminal highlight group before
   creating the terminal.  Setting 'wincolor' later can work but requires the
@@ -915,6 +915,12 @@ but since many keys start with an Esc character, there may be a delay before
 Vim recognizes the Esc key.  If you do use Esc, it is recommended to set the
 'ttimeoutlen' option to 100 and set 'timeout' and/or 'ttimeout'.
 
+							*popup-filter-errors*
+If the filter function can't be called, e.g. because the name is wrong, then
+the popup is closed.  If the filter causes an error then it is assumed to
+return zero.  If this happens three times in a row the popup is closed.  If
+the popup gives errors fewer than 10% of the calls then it won't be closed.
+
 
 POPUP CALLBACK						*popup-callback*
 

runtime/doc/print.txt

@@ -1,4 +1,4 @@
-*print.txt*     For Vim version 8.2.  Last change: 2019 Dec 17
+*print.txt*     For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -114,7 +114,7 @@ If 'printencoding' is empty or Vim cannot find the file then it will use
 encoding file.  If Vim is unable to find a character encoding file then it
 will use the "latin1" print character encoding file.
 
-When 'encoding' is set to a multi-byte encoding, Vim will try to convert
+When 'encoding' is set to a multibyte encoding, Vim will try to convert
 characters to the printing encoding for printing (if 'printencoding' is empty
 then the conversion will be to latin1).  Conversion to a printing encoding
 other than latin1 will require Vim to be compiled with the |+iconv| feature.
@@ -269,7 +269,7 @@ Japanese text you would do the following; >
 	:set printmbcharset=JIS_X_1983
 
 If 'printmbcharset' is not one of the above values then it is assumed to
-specify a custom multi-byte character set and no check will be made that it is
+specify a custom multibyte character set and no check will be made that it is
 compatible with the value for 'printencoding'.  Vim will look for a file
 defining the character set in the "print" directory in 'runtimepath'.
 
@@ -304,7 +304,7 @@ printing of characters in the ASCII code range.
   a:yes			Use ASCII character set for codes in the ASCII
   a:no (default)	code range.
 
-The following is an example of specifying two multi-byte fonts, one for normal
+The following is an example of specifying two multibyte fonts, one for normal
 and italic printing and one for bold and bold-italic printing, and using
 Courier to print codes in the ASCII code range but using the national
 character set: >
@@ -420,10 +420,10 @@ There are currently a number of limitations with PostScript printing:
   possible to get all the characters in an encoding to print by installing a
   new version of the Courier font family.
 
-- Multi-byte support - Currently Vim will try to convert multi-byte characters
+- Multi-byte support - Currently Vim will try to convert multibyte characters
   to the 8-bit encoding specified by 'printencoding' (or latin1 if it is
   empty).  Any characters that are not successfully converted are shown as
-  unknown characters.  Printing will fail if Vim cannot convert the multi-byte
+  unknown characters.  Printing will fail if Vim cannot convert the multibyte
   to the 8-bit encoding.
 
 ==============================================================================
@@ -508,7 +508,7 @@ print ASCII text using the national character set you may see some unexpected
 characters.  If you want true ASCII code printing then you need to configure
 Vim to output ASCII characters for the ASCII code range with 'printmbfont'.
 
-It is possible to define your own multi-byte character set although this
+It is possible to define your own multibyte character set although this
 should not be attempted lightly.  A discussion on the process if beyond the
 scope of these help files.  You can find details on CMap (character map) files
 in the document 'Adobe CMap and CIDFont Files Specification, Version 1.0',

runtime/doc/quickfix.txt

@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.2.  Last change: 2020 Jan 06
+*quickfix.txt*  For Vim version 8.2.  Last change: 2020 May 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -15,6 +15,7 @@ This subject is introduced in section |30.1| of the user manual.
 7. The error format			|error-file-format|
 8. The directory stack			|quickfix-directory-stack|
 9. Specific error file formats		|errorformats|
+10. Customizing the quickfix window	|quickfix-window-function|
 
 The quickfix commands are not available when the |+quickfix| feature was
 disabled at compile time.
@@ -1374,7 +1375,11 @@ Basic items
 	%v		virtual column number (finds a number representing
 			screen column of the error (1 <tab> == 8 screen
 			columns))
-	%t		error type (finds a single character)
+	%t		error type (finds a single character):
+			    e - error message
+			    w - warning message
+			    i - info message
+			    n - note message
 	%n		error number (finds a number)
 	%m		error message (finds a string)
 	%r		matches the "rest" of a single-line file message %O/P/Q
@@ -1445,6 +1450,7 @@ prefixes are:
 	%E		start of a multi-line error message
 	%W		start of a multi-line warning message
 	%I		start of a multi-line informational message
+	%N		start of a multi-line note message
 	%A		start of a multi-line message (unspecified type)
 	%>		for next line start with current pattern again |efm-%>|
 	%C		continuation of a multi-line message
@@ -1699,7 +1705,7 @@ special problem here is that it doesn't print information on leaving the
 directory and that it doesn't print the absolute path.
 
 To solve the problem with relative paths and missing "leave directory"
-messages Vim uses following algorithm:
+messages Vim uses the following algorithm:
 
 1) Check if the given directory is a subdirectory of the current directory.
    If this is true, store it as the current directory.
@@ -1921,6 +1927,70 @@ error messages into a format that quickfix mode will understand.  See the
 start of the file about how to use it.  (This script is deprecated, see
 |compiler-perl|.)
 
+=============================================================================
+10. Customizing the quickfix window		*quickfix-window-function*
 
+The default format for the lines displayed in the quickfix window and location
+list window is:
+
+    <filename>|<lnum> col <col>|<text>
+
+The values displayed in each line correspond to the "bufnr", "lnum", "col" and
+"text" fields returned by the |getqflist()| function.
+
+For some quickfix/location lists, the displayed text needs to be customized.
+For example, if only the filename is present for a quickfix entry, then the
+two "|" field separator characters after the filename are not needed.  Another
+use case is to customize the path displayed for a filename. By default, the
+complete path (which may be too long) is displayed for files which are not
+under the current directory tree. The file path may need to be simplified to a
+common parent directory.
+
+The displayed text can be customized by setting the 'quickfixtextfunc' option
+to a Vim function.  This function will be called with a dict argument and
+should return a List of strings to be displayed in the quickfix or location
+list window. The dict argument will have the following fields:
+
+    quickfix	set to 1 when called for a quickfix list and 0 when called for
+		a location list.
+    winid	for a location list, set to the id of the window with the
+		location list. For a quickfix list, set to 0. Can be used in
+		getloclist() to get the location list entry.
+    id		quickfix or location list identifier
+    start_idx	index of the first entry for which text should be returned
+    end_idx	index of the last entry for which text should be returned
+
+The function should return a single line of text to display in the quickfix
+window for each entry from start_idx to end_idx. The function can obtain
+information about the entries using the |getqflist()| function and specifying
+the quickfix list identifier "id". For a location list, getloclist() function
+can be used with the 'winid' argument. If an empty list is returned, then the
+default format is used to display all the entries. If an item in the returned
+list is an empty string, then the default format is used to display the
+corresponding entry.
+
+If a quickfix or location list specific customization is needed, then the
+'quickfixtextfunc' attribute of the list can be set using the |setqflist()| or
+|setloclist()| function. This overrides the global 'quickfixtextfunc' option.
+
+The example below displays the list of old files (|v:oldfiles|) in a quickfix
+window. As there is no line, column number and error text information
+associated with each entry, the 'quickfixtextfunc' function returns only the
+filename.
+Example: >
+    " create a quickfix list from v:oldfiles
+    call setqflist([], ' ', {'lines' : v:oldfiles, 'efm' : '%f',
+					\ 'quickfixtextfunc' : 'QfOldFiles'})
+    func QfOldFiles(info)
+	" get information about a range of quickfix entries
+	let items = getqflist({'id' : a:info.id, 'items' : 1}).items
+	let l = []
+	for idx in range(a:info.start_idx - 1, a:info.end_idx - 1)
+	    " use the simplified file name
+	  call add(l, fnamemodify(bufname(items[idx].bufnr), ':p:.'))
+	endfor
+	return l
+    endfunc
+<
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/quickref.txt

@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 8.2.  Last change: 2020 Jan 17
+*quickref.txt*  For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -696,7 +696,7 @@ Short explanation of each option:		*option-list*
 'eventignore'	  'ei'	    autocommand events that are ignored
 'expandtab'	  'et'	    use spaces when <Tab> is inserted
 'exrc'		  'ex'	    read .vimrc and .exrc in the current directory
-'fileencoding'	  'fenc'    file encoding for multi-byte text
+'fileencoding'	  'fenc'    file encoding for multibyte text
 'fileencodings'   'fencs'   automatically detected character encodings
 'fileformat'	  'ff'	    file format used for file I/O
 'fileformats'	  'ffs'     automatically detected values for 'fileformat'
@@ -728,7 +728,7 @@ Short explanation of each option:		*option-list*
 'grepprg'	  'gp'	    program to use for ":grep"
 'guicursor'	  'gcr'     GUI: settings for cursor shape and blinking
 'guifont'	  'gfn'     GUI: Name(s) of font(s) to be used
-'guifontset'	  'gfs'     GUI: Names of multi-byte fonts to be used
+'guifontset'	  'gfs'     GUI: Names of multibyte fonts to be used
 'guifontwide'	  'gfw'     list of font names for double-wide characters
 'guiheadroom'	  'ghr'     GUI: pixels room for window decorations
 'guioptions'	  'go'	    GUI: Which components and options are used
@@ -851,6 +851,7 @@ Short explanation of each option:		*option-list*
 'pythonthreedll'	    name of the Python 3 dynamic library
 'pythonthreehome'	    name of the Python 3 home directory
 'pyxversion'	  'pyx'	    Python version used for pyx* commands
+'quickfixtextfunc' 'qftf'   function for the text in the quickfix window
 'quoteescape'	  'qe'	    escape characters used in a string
 'readonly'	  'ro'	    disallow writing the buffer
 'redrawtime'	  'rdt'     timeout for 'hlsearch' and |:match| highlighting
@@ -909,6 +910,7 @@ Short explanation of each option:		*option-list*
 'spellcapcheck'   'spc'     pattern to locate end of a sentence
 'spellfile'	  'spf'     files where |zg| and |zw| store words
 'spelllang'	  'spl'     language(s) to do spell checking for
+'spelloptions'	  'spo'     options for spell checking
 'spellsuggest'	  'sps'     method(s) used to suggest spelling corrections
 'splitbelow'	  'sb'	    new window from split is below the current one
 'splitright'	  'spr'     new window is put right of the current one

runtime/doc/recover.txt

@@ -1,4 +1,4 @@
-*recover.txt*   For Vim version 8.2.  Last change: 2020 May 09
+*recover.txt*   For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -64,8 +64,8 @@ Disadvantages:
   directories (although Vim tries to avoid that by comparing the path name).
   This will result in bogus ATTENTION warning messages.
 - When you use your home directory, and somebody else tries to edit the same
-  file, he will not see your swap file and will not get the ATTENTION warning
-  message.
+  file, that user will not see your swap file and will not get the ATTENTION
+  warning message.
 On the Amiga you can also use a recoverable ram disk, but there is no 100%
 guarantee that this works.  Putting swap files in a normal ram disk (like RAM:
 on the Amiga) or in a place that is cleared when rebooting (like /tmp on Unix)

runtime/doc/remote.txt

@@ -179,7 +179,7 @@ name on the 'VimRegistry' property on the root window.
 
 A non GUI Vim with access to the X11 display (|xterm-clipboard| enabled), can
 also act as a command server if a server name is explicitly given with the
---servername argument, or when Vim was build with the |+autoservername|
+--servername argument, or when Vim was built with the |+autoservername|
 feature.
 
 An empty --servername argument will cause the command server to be disabled.

runtime/doc/repeat.txt

@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 8.2.  Last change: 2020 Apr 26
+*repeat.txt*    For Vim version 8.2.  Last change: 2020 Aug 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -126,6 +126,11 @@ q{0-9a-zA-Z"}		Record typed characters into register {0-9a-zA-Z"}
 			recorded macro and the yank will overwrite the
 			recorded macro.
 
+			Note: The recording happens while you type, replaying
+			the register happens as if the keys come from a
+			mapping.  This matters, for example, for undo, which
+			only syncs when commands were typed.
+
 q			Stops recording.  (Implementation note: The 'q' that
 			stops recording is not stored in the register, unless
 			it was the result of a mapping)
@@ -137,7 +142,7 @@ q			Stops recording.  (Implementation note: The 'q' that
 			used.
 			The register is executed like a mapping, that means
 			that the difference between 'wildchar' and 'wildcharm'
-			applies.
+			applies, and undo might not be synced in the same way.
 			For "@=" you are prompted to enter an expression.  The
 			result of the expression is then executed.
 			See also |@:|.
@@ -158,6 +163,11 @@ q			Stops recording.  (Implementation note: The 'q' that
 			result of evaluating the expression is executed as an
 			Ex command.
 			Mappings are not recognized in these commands.
+			When the |line-continuation| character (\) is present
+			at the beginning of a line in a linewise register,
+			then it is combined with the previous line. This is
+			useful for yanking and executing parts of a Vim
+			script.
 			Future: Will execute the register for each line in the
 			address range.
 
@@ -632,8 +642,8 @@ disallowed though.
 This assumes you write one or more plugins that you distribute as a package.
 
 If you have two unrelated plugins you would use two packages, so that Vim
-users can chose what they include or not.  Or you can decide to use one
-package with optional plugins, and tell the user to add the ones he wants with
+users can choose what they include or not.  Or you can decide to use one
+package with optional plugins, and tell the user to add the preferred ones with
 `:packadd`.
 
 Decide how you want to distribute the package.  You can create an archive or
@@ -669,7 +679,7 @@ You could add this packadd command in one of your plugins, to be executed when
 the optional plugin is needed.
 
 Run the `:helptags` command to generate the doc/tags file.  Including this
-generated file in the package means that the user can drop the package in his
+generated file in the package means that the user can drop the package in the
 pack directory and the help command works right away.  Don't forget to re-run
 the command after changing the plugin help: >
 	:helptags path/start/foobar/doc

runtime/doc/rileft.txt

@@ -69,7 +69,7 @@ o  Invocations
    + 'rightleft' ('rl') sets window orientation to right-to-left.
    + 'delcombine' ('deco'), boolean, if editing UTF-8 encoded languages,
      allows one to remove a composing character which gets superimposed
-     on those that proceeded them (some languages require this).
+     on those that preceded them (some languages require this).
    + 'rightleftcmd' ('rlc') sets the command-line within certain modes
      (such as search) to be utilized in right-to-left orientation as well.
 

runtime/doc/sign.txt

@@ -1,4 +1,4 @@
-*sign.txt*      For Vim version 8.2.  Last change: 2019 Nov 30
+*sign.txt*      For Vim version 8.2.  Last change: 2020 Aug 31
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -78,13 +78,17 @@ used by popup windows where 'cursorline' is set.
 							*sign-priority*
 Each placed sign is assigned a priority value. When multiple signs are placed
 on the same line, the attributes of the sign with the highest priority is used
-independent of the sign group. The default priority for a sign is 10. The
+independently of the sign group. The default priority for a sign is 10. The
 priority is assigned at the time of placing a sign.
 
 When the line on which the sign is placed is deleted, the sign is moved to the
 next line (or the last line of the buffer, if there is no next line).  When
 the delete is undone the sign does not move back.
 
+When a sign with line highlighting and 'cursorline' highlighting are both
+present, if the priority is 100 or more then the sign highlighting takes
+precedence, otherwise the 'cursorline' highlighting.
+
 ==============================================================================
 2. Commands					*sign-commands* *:sig* *:sign*