patch 8.2.4752: wrong 'statusline' value can cause illegal memory access

Problem:    Wrong 'statusline' value can cause illegal memory access.
Solution:   Properly check the value. (closes #10192)

.github/CODEOWNERS

@@ -9,6 +9,7 @@
 # So if a pull request only touches javascript files, only these owners
 # will be requested to review.
 
+runtime/autoload/freebasic.vim		@dkearns
 runtime/autoload/getscript.vim		@cecamp
 runtime/autoload/netrw.vim		@cecamp
 runtime/autoload/netrwFileHandlers.vim	@cecamp
@@ -51,6 +52,7 @@ runtime/compiler/sass.vim		@tpope
 runtime/compiler/se.vim			@dkearns
 runtime/compiler/shellcheck.vim		@dkearns
 runtime/compiler/sml.vim		@dkearns
+runtime/compiler/spectral.vim		@romainl
 runtime/compiler/stylelint.vim		@dkearns
 runtime/compiler/tcl.vim		@dkearns
 runtime/compiler/tidy.vim		@dkearns
@@ -59,6 +61,7 @@ runtime/compiler/tsc.vim		@dkearns
 runtime/compiler/typedoc.vim		@dkearns
 runtime/compiler/xmllint.vim		@dkearns
 runtime/compiler/xo.vim			@dkearns
+runtime/compiler/yamllint.vim		@romainl
 runtime/compiler/zsh.vim		@dkearns
 runtime/doc/pi_getscript.txt		@cecamp
 runtime/doc/pi_logipat.txt		@cecamp
@@ -71,6 +74,8 @@ runtime/ftplugin/awk.vim		@dkearns
 runtime/ftplugin/basic.vim		@dkearns
 runtime/ftplugin/bst.vim		@tpope
 runtime/ftplugin/cfg.vim		@chrisbra
+runtime/ftplugin/clojure.vim		@axvr
+runtime/ftplugin/csh.vim		@dkearns
 runtime/ftplugin/css.vim		@dkearns
 runtime/ftplugin/cucumber.vim		@tpope
 runtime/ftplugin/eiffel.vim		@dkearns
@@ -85,49 +90,83 @@ runtime/ftplugin/gitsendemail.vim	@tpope
 runtime/ftplugin/gprof.vim		@dpelle
 runtime/ftplugin/haml.vim		@tpope
 runtime/ftplugin/hgcommit.vim		@k-takata
+runtime/ftplugin/i3config.vim		@hiqua
+runtime/ftplugin/indent.vim		@dkearns
 runtime/ftplugin/javascript.vim		@dkearns
 runtime/ftplugin/javascriptreact.vim	@dkearns
 runtime/ftplugin/kconfig.vim		@chrisbra
 runtime/ftplugin/liquid.vim		@tpope
+runtime/ftplugin/lua.vim		@dkearns
 runtime/ftplugin/m3build.vim		@dkearns
 runtime/ftplugin/m3quake.vim		@dkearns
 runtime/ftplugin/markdown.vim		@tpope
 runtime/ftplugin/matlab.vim		@cecamp
 runtime/ftplugin/meson.vim		@Liambeguin
 runtime/ftplugin/modula3.vim		@dkearns
+runtime/ftplugin/nginx.vim		@chr4
 runtime/ftplugin/nroff.vim		@a-vrma
 runtime/ftplugin/nsis.vim		@k-takata
+runtime/ftplugin/octave.vim		@dkearns
 runtime/ftplugin/pascal.vim		@dkearns
 runtime/ftplugin/pbtxt.vim		@lakshayg
 runtime/ftplugin/pdf.vim		@tpope
 runtime/ftplugin/ps1.vim		@heaths
 runtime/ftplugin/ps1xml.vim		@heaths
+runtime/ftplugin/qb64.vim		@dkearns
+runtime/ftplugin/routeros.vim		@zainin
 runtime/ftplugin/ruby.vim		@tpope @dkearns
 runtime/ftplugin/sass.vim		@tpope
 runtime/ftplugin/scss.vim		@tpope
+runtime/ftplugin/solution.vim		@dkearns
 runtime/ftplugin/spec.vim		@ignatenkobrain
 runtime/ftplugin/systemverilog.vim	@Kocha
+runtime/ftplugin/tcsh.vim		@dkearns
 runtime/ftplugin/tidy.vim		@dkearns
 runtime/ftplugin/tmux.vim		@ericpruitt
+runtime/ftplugin/toml.vim		@averms
 runtime/ftplugin/typescript.vim		@dkearns
 runtime/ftplugin/typescriptreact.vim	@dkearns
 runtime/ftplugin/xml.vim		@chrisbra
 runtime/ftplugin/zsh.vim		@chrisbra
+runtime/indent/basic.vim		@dkearns
 runtime/indent/bst.vim			@tpope
+runtime/indent/cdl.vim			@dkearns
+runtime/indent/clojure.vim		@axvr
+runtime/indent/config.vim		@dkearns
+runtime/indent/css.vim			@dkearns
 runtime/indent/cucumber.vim		@tpope
+runtime/indent/d.vim			@dkearns
 runtime/indent/dosbatch.vim		@k-takata
+runtime/indent/dtd.vim			@dkearns
+runtime/indent/dylan.vim		@dkearns
+runtime/indent/elm.vim			@andys8
 runtime/indent/eruby.vim		@tpope @dkearns
+runtime/indent/eterm.vim		@dkearns
+runtime/indent/framescript.vim		@dkearns
+runtime/indent/freebasic.vim		@dkearns
 runtime/indent/gitconfig.vim		@tpope
 runtime/indent/haml.vim			@tpope
+runtime/indent/idlang.vim		@dkearns
+runtime/indent/ld.vim			@dkearns
 runtime/indent/liquid.vim		@tpope
+runtime/indent/make.vim			@dkearns
 runtime/indent/meson.vim		@Liambeguin
+runtime/indent/mma.vim			@dkearns
+runtime/indent/nginx.vim		@chr4
 runtime/indent/nsis.vim			@k-takata
+runtime/indent/occam.vim		@dkearns
+runtime/indent/postscr.vim		@dkearns
+runtime/indent/prolog.vim		@dkearns
 runtime/indent/ps1.vim			@heaths
+runtime/indent/qb64.vim			@dkearns
+runtime/indent/readline.vim		@dkearns
 runtime/indent/ruby.vim			@AndrewRadev @dkearns
 runtime/indent/sass.vim			@tpope
 runtime/indent/scss.vim			@tpope
 runtime/indent/sh.vim			@chrisbra
 runtime/indent/systemverilog.vim	@Kocha
+runtime/indent/tcl.vim			@dkearns
+runtime/indent/tcsh.vim			@dkearns
 runtime/indent/teraterm.vim		@k-takata
 runtime/indent/xml.vim			@chrisbra
 runtime/indent/zsh.vim			@chrisbra
@@ -142,6 +181,7 @@ runtime/plugin/vimballPlugin.vim	@cecamp
 runtime/plugin/zipPlugin.vim		@cecamp
 runtime/syntax/aidl.vim			@dpelle
 runtime/syntax/amiga.vim		@cecamp
+runtime/syntax/arduino.vim		@johshoff
 runtime/syntax/asm.vim			@dkearns
 runtime/syntax/asmh8300.vim		@dkearns
 runtime/syntax/asterisk.vim		@jaunis
@@ -151,6 +191,7 @@ runtime/syntax/bst.vim			@tpope
 runtime/syntax/cabal.vim		@coot
 runtime/syntax/cabalconfig.vim		@coot
 runtime/syntax/cabalproject.vim		@coot
+runtime/syntax/clojure.vim		@axvr
 runtime/syntax/cs.vim			@nickspoons
 runtime/syntax/csh.vim			@cecamp
 runtime/syntax/cucumber.vim		@tpope
@@ -174,6 +215,8 @@ runtime/syntax/groff.vim		@jmarshall
 runtime/syntax/haml.vim			@tpope
 runtime/syntax/haskell.vim		@coot
 runtime/syntax/hgcommit.vim		@k-takata
+runtime/syntax/i3config.vim		@hiqua
+runtime/syntax/indent.vim		@dkearns
 runtime/syntax/kconfig.vim		@chrisbra
 runtime/syntax/less.vim			@genoma
 runtime/syntax/lex.vim			@cecamp
@@ -189,6 +232,7 @@ runtime/syntax/markdown.vim		@tpope
 runtime/syntax/meson.vim		@Liambeguin
 runtime/syntax/modula3.vim		@dkearns
 runtime/syntax/netrw.vim		@cecamp
+runtime/syntax/nginx.vim		@chr4
 runtime/syntax/nroff.vim		@jmarshall
 runtime/syntax/nsis.vim			@k-takata
 runtime/syntax/pascal.vim		@dkearns
@@ -200,7 +244,9 @@ runtime/syntax/prolog.vim		@XVilka
 runtime/syntax/ps1.vim			@heaths
 runtime/syntax/ps1xml.vim		@heaths
 runtime/syntax/psl.vim			@danielkho
+runtime/syntax/qb64.vim			@dkearns
 runtime/syntax/rc.vim			@chrisbra
+runtime/syntax/routeros.vim		@zainin
 runtime/syntax/rpcgen.vim		@cecamp
 runtime/syntax/ruby.vim			@dkearns
 runtime/syntax/sass.vim			@tpope
@@ -214,10 +260,12 @@ runtime/syntax/sshdconfig.vim		@Jakuje
 runtime/syntax/sudoers.vim		@e-kwsm
 runtime/syntax/systemverilog.vim	@Kocha
 runtime/syntax/tags.vim			@cecamp
+runtime/syntax/tcsh.vim			@dkearns
 runtime/syntax/teraterm.vim		@k-takata
 runtime/syntax/tex.vim			@cecamp
 runtime/syntax/tidy.vim			@dkearns
 runtime/syntax/tmux.vim			@ericpruitt
+runtime/syntax/toml.vim			@averms
 runtime/syntax/vim.vim			@cecamp
 runtime/syntax/wget.vim			@dkearns
 runtime/syntax/xbl.vim			@dkearns
@@ -236,3 +284,4 @@ src/libvterm/				@leonerd
 src/po/de.po				@chrisbra
 src/po/eo.po				@dpelle
 src/po/fr.po				@dpelle
+src/xxd/				@jnweiger

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,34 +0,0 @@
----
-name: Bug report
-about: Create a report to help us improve Vim
-title: ''
-labels: ''
-
----
-
-_Instructions: Replace the template text and remove irrelevant text (including this line)_
-
-**Describe the bug**
-A clear and concise description of what the bug is.
-(Issues related to the runtime files should be reported to their maintainer, check the file header.)
-
-**To Reproduce**
-Detailed steps to reproduce the behavior:
-1. Run `vim --clean` (or `gvim --clean`, etc.)
-2. Edit `filename`
-3. Type '....'
-4. Describe the error
-
-**Expected behavior**
-A clear and concise description of what you expected to happen.
-
-**Screenshots**
-If applicable, copy/paste the text or add screenshots to help explain your problem.
-
-**Environment (please complete the following information):**
- - Vim version [e.g. 8.1.1234] (Or paste the result of `vim --version`.)
- - OS: [e.g. Ubuntu 18.04, Windows 10 1809, macOS 10.14]
- - Terminal: [e.g. GNOME Terminal, mintty, iTerm2, tmux, GNU screen] (Use GUI if you use the GUI.)
-
-**Additional context**
-Add any other context about the problem here.

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,57 @@
+---
+name: Bug report
+description: Create a report to help us improve Vim.
+labels: [bug]
+
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for reporting issues of Vim!
+
+        If you want to report a security issue, instead of reporting it here
+        you can alternatively disclose it on
+        [huntr.dev](https://huntr.dev/bounties/disclose/?utm_campaign=vim%2Fvim&utm_medium=social&utm_source=github&target=https%3A%2F%2Fgithub.com%2Fvim%2Fvim).
+        They have rewards in the form of money, swag and CVEs.
+        
+        To make it easier for us to help you please enter detailed information below.
+  - type: textarea
+    attributes:
+      label: Steps to reproduce
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Expected behaviour
+      placeholder: A clear and concise description of what you expected to happen.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Version of Vim
+      description: >
+        Including patch level, use ":version" to see it [e.g. 8.2.1234]
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Environment
+      description: >
+        OS [e.g. Ubuntu 21.10], terminal [e.g. GNOME Terminal 3.38.1], value of $TERM, shell [e.g. bash 5.1.8]; anything that might matter
+      placeholder: |
+        Operating system:
+        Terminal:
+        Value of $TERM:
+        Shell:
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Logs and stack traces
+      placeholder: Insert log or other text here (if necessary)
+      render: shell

.github/workflows/ci.yml

@@ -5,6 +5,13 @@ on:
     branches: ['**']
   pull_request:
 
+# Cancels all previous workflow runs for pull requests that have not completed.
+concurrency:
+  # The concurrency group contains the workflow name and the branch name for
+  # pull requests or the commit hash for any other events.
+  group: ${{ github.workflow }}-${{ github.event_name == 'pull_request' && github.head_ref || github.sha }}
+  cancel-in-progress: true
+
 jobs:
   linux:
     runs-on: ubuntu-18.04
@@ -40,6 +47,7 @@ jobs:
             compiler: gcc
             coverage: true
             extra: testgui
+            uchar: true
           - features: huge
             compiler: clang
             extra: asan
@@ -56,33 +64,41 @@ jobs:
 
       - name: Install packages
         run: |
-          sudo apt-get install -y \
-            autoconf \
-            lcov \
+          PKGS=( \
             gettext \
-            libcanberra-dev \
-            libperl-dev \
-            python-dev \
-            python3-dev \
-            liblua5.3-dev \
-            lua5.3 \
-            ruby-dev \
-            tcl-dev \
-            cscope \
             libgtk2.0-dev \
             desktop-file-utils \
-            libtool-bin
+            libtool-bin \
+          )
+          if ${{ matrix.features == 'huge' }}; then
+            PKGS+=( \
+              autoconf \
+              lcov \
+              libcanberra-dev \
+              libperl-dev \
+              python-dev \
+              python3-dev \
+              liblua5.3-dev \
+              lua5.3 \
+              ruby-dev \
+              tcl-dev \
+              cscope \
+              libsodium-dev \
+            )
+          fi
+          sudo apt update && sudo apt install -y "${PKGS[@]}"
 
-      - name: Install clang-11
+      - name: Install clang-14
         if: matrix.compiler == 'clang'
         run: |
           wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add -
           . /etc/lsb-release
-          sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-11 main"
-          sudo apt-get install -y clang-11
-          sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-11 100
-          sudo update-alternatives --set clang /usr/bin/clang-11
-          sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-11 100
+          sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-14 main"
+          sudo apt-get install -y clang-14 llvm-14
+          sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-14 100
+          sudo update-alternatives --set clang /usr/bin/clang-14
+          sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-14 100
+          sudo update-alternatives --install /usr/bin/asan_symbolize asan_symbolize /usr/bin/asan_symbolize-14 100
 
       - name: Set up environment
         run: |
@@ -111,9 +127,12 @@ jobs:
           esac
 
           if ${{ matrix.coverage == true }}; then
-            echo "CFLAGS=--coverage -DUSE_GCOV_FLUSH"
+            CFLAGS="$CFLAGS --coverage -DUSE_GCOV_FLUSH"
             echo "LDFLAGS=--coverage"
           fi
+          if ${{ matrix.uchar == true }}; then
+            CFLAGS="$CFLAGS -funsigned-char"
+          fi
           if ${{ contains(matrix.extra, 'testgui') }}; then
             echo "TEST=-C src testgui"
           fi
@@ -129,6 +148,7 @@ jobs:
           if ${{ contains(matrix.extra, 'vimtags') }}; then
             echo "TEST=-C runtime/doc vimtags VIMEXE=../../${SRCDIR}/vim"
           fi
+          echo "CFLAGS=$CFLAGS"
           ) >> $GITHUB_ENV
 
       - name: Set up system
@@ -181,6 +201,10 @@ jobs:
           # Append various warning flags to CFLAGS.
           sed -i -f ci/config.mk.sed ${SRCDIR}/auto/config.mk
           sed -i -f ci/config.mk.${CC}.sed ${SRCDIR}/auto/config.mk
+          if [[ ${CC} = clang ]]; then
+            # Suppress some warnings produced by clang 12 and later.
+            sed -i -f ci/config.mk.clang-12.sed ${SRCDIR}/auto/config.mk
+          fi
 
       - name: Build
         if: (!contains(matrix.extra, 'unittests'))
@@ -200,51 +224,57 @@ jobs:
           do_test() { sg audio "sg $(id -gn) '$*'"; }
           do_test make ${SHADOWOPT} ${TEST}
 
-      - name: Coveralls
-        if: matrix.coverage && success() && github.event_name != 'pull_request'
-        env:
-          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-          COVERALLS_PARALLEL: true
-          TRAVIS_JOB_ID: ${{ github.run_id }}
-        run: |
-          sudo apt-get install -y python3-setuptools python3-wheel
-          sudo -H pip3 install pip -U
-          # needed for https support for coveralls building cffi only works with gcc, not with clang
-          CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
-          ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
+      # - name: Coveralls
+      #   if: matrix.coverage && github.event_name != 'pull_request'
+      #   env:
+      #     COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+      #     COVERALLS_PARALLEL: true
+      #     TRAVIS_JOB_ID: ${{ github.run_id }}
+      #   run: |
+      #     sudo apt-get install -y python3-setuptools python3-wheel
+      #     sudo -H pip3 install pip -U
+      #     # needed for https support for coveralls building cffi only works with gcc, not with clang
+      #     CC=gcc pip3 install --user cpp-coveralls pyopenssl ndg-httpsclient pyasn1
+      #     ~/.local/bin/coveralls -b "${SRCDIR}" -x .xs -e "${SRCDIR}"/if_perl.c -e "${SRCDIR}"/xxd -e "${SRCDIR}"/libvterm --encodings utf-8
 
-      - name: Codecov
-        if: matrix.coverage && success()
+      - name: Generate gcov files
+        if: matrix.coverage
         run: |
           cd "${SRCDIR}"
-          bash <(curl -s https://codecov.io/bash) -F "${{ matrix.features }}-${{ matrix.compiler }}-${{ matrix.extra }}"
+          find . -type f -name '*.gcno' -exec gcov -pb {} + || true
+
+      - name: Codecov
+        if: matrix.coverage
+        uses: codecov/codecov-action@v2
+        with:
+          flags: linux,${{ matrix.features }}-${{ matrix.compiler }}-${{ matrix.extra }}
 
       - name: ASan logs
         if: contains(matrix.extra, 'asan') && !cancelled()
         run: |
-          for f in $(grep -lR '#[[:digit:]]* *0x[[:digit:]a-fA-F]*' "${LOG_DIR}"); do
-            asan_symbolize-11 -l "$f"
+          for f in $(grep -lR '#[[:digit:]]* *0x[[:xdigit:]]*' "${LOG_DIR}"); do
+            asan_symbolize -l "$f"
             false # in order to fail a job
           done
 
-  coveralls:
-    runs-on: ubuntu-18.04
-
-    needs: linux
-    if: always() && github.event_name != 'pull_request'
-
-    steps:
-      - name: Parallel finished
-        env:
-          COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
-        run: |
-          curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
+  # coveralls:
+  #   runs-on: ubuntu-18.04
+  #
+  #   needs: linux
+  #   if: always() && github.event_name != 'pull_request'
+  #
+  #   steps:
+  #     - name: Parallel finished
+  #       env:
+  #         COVERALLS_REPO_TOKEN: ${{ secrets.COVERALLS_REPO_TOKEN }}
+  #       run: |
+  #         curl -k "https://coveralls.io/webhook?repo_token=${COVERALLS_REPO_TOKEN}" -d "payload[build_num]=${GITHUB_RUN_ID}&payload[status]=done"
 
   macos:
     runs-on: macos-latest
 
     env:
-      CC: ${{ matrix.compiler }}
+      CC: clang
       TEST: test
       SRCDIR: ./src
       LEAK_CFLAGS: -DEXITFREE
@@ -253,13 +283,13 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        features: [tiny, huge]
-        compiler: [clang, gcc]
+        features: [tiny, normal, huge]
 
     steps:
       - uses: actions/checkout@v2
 
       - name: Install packages
+        if: matrix.features == 'huge'
         env:
           HOMEBREW_NO_AUTO_UPDATE: 1
         run: |
@@ -275,6 +305,8 @@ jobs:
             echo "TEST=testtiny"
             echo "CONFOPT=--disable-gui"
             ;;
+          normal)
+            ;;
           huge)
             echo "CONFOPT=--enable-perlinterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
             ;;
@@ -289,6 +321,10 @@ jobs:
           sed -i.bak -f ci/config.mk.sed ${SRCDIR}/auto/config.mk
           # On macOS, the entity of gcc is clang.
           sed -i.bak -f ci/config.mk.clang.sed ${SRCDIR}/auto/config.mk
+          # Suppress some warnings produced by clang 12 and later.
+          if clang --version | grep -qs 'Apple clang version \(1[3-9]\|[2-9]\)\.'; then
+            sed -i.bak -f ci/config.mk.clang-12.sed ${SRCDIR}/auto/config.mk
+          fi
 
       - name: Build
         env:
@@ -308,15 +344,14 @@ jobs:
           make ${TEST}
 
   windows:
-    runs-on: windows-latest
+    runs-on: windows-2019
 
     env:
-      VCVARSALL: C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\vcvarsall.bat
       # Interfaces
       # Lua
       LUA_VER: 54
       LUA_VER_DOT: '5.4'
-      LUA_RELEASE: 5.4.0
+      LUA_RELEASE: 5.4.2
       LUA32_URL: https://downloads.sourceforge.net/luabinaries/lua-%LUA_RELEASE%_Win32_dllw6_lib.zip
       LUA64_URL: https://downloads.sourceforge.net/luabinaries/lua-%LUA_RELEASE%_Win64_dllw6_lib.zip
       LUA_DIR: D:\Lua
@@ -324,8 +359,8 @@ jobs:
       PYTHON_VER: 27
       PYTHON_VER_DOT: '2.7'
       # Python 3
-      PYTHON3_VER: 38
-      PYTHON3_VER_DOT: '3.8'
+      PYTHON3_VER: 310
+      PYTHON3_VER_DOT: '3.10'
       # Other dependencies
       # winpty
       WINPTY_URL: https://github.com/rprichard/winpty/releases/download/0.4.3/winpty-0.4.3-msvc2015.zip
@@ -356,6 +391,10 @@ jobs:
             msystem: MINGW32
             cygreg: registry32
             pyreg: "-32"
+          - toolchain: mingw
+            arch: x64
+            features: HUGE
+            coverage: yes
         exclude:
           - toolchain: msvc
             arch: x64
@@ -365,11 +404,12 @@ jobs:
             features: NORMAL
 
     steps:
-      - name: Initalize
+      - name: Initialize
         id: init
         shell: bash
         run: |
           git config --global core.autocrlf input
+          echo "VCVARSALL=$(vswhere -products \* -latest -property installationPath)\\VC\\Auxiliary\\Build\\vcvarsall.bat" >> $GITHUB_ENV
           python_dir=$(cat "/proc/${{ matrix.cygreg }}/HKEY_LOCAL_MACHINE/SOFTWARE/Python/PythonCore/${PYTHON_VER_DOT}/InstallPath/@")
           python3_dir=$(cat "/proc/${{ matrix.cygreg }}/HKEY_LOCAL_MACHINE/SOFTWARE/Python/PythonCore/${PYTHON3_VER_DOT}${{ matrix.pyreg }}/InstallPath/@")
           echo "PYTHON_DIR=$python_dir" >> $GITHUB_ENV
@@ -427,8 +467,7 @@ jobs:
 
       - name: Copy src directory to src2
         shell: cmd
-        run: |
-          xcopy src src2\ /E > nul
+        run: xcopy src src2\ /E > nul
 
       - name: Build (MSVC)
         if: matrix.toolchain == 'msvc'
@@ -436,17 +475,15 @@ jobs:
         run: |
           call "%VCVARSALL%" ${{ matrix.vcarch }}
           cd src
-          :: Filter out the progress bar from the build log
-          sed -e "s/@<<$/@<< | sed -e 's#.*\\\\r.*##'/" Make_mvc.mak > Make_mvc2.mak
           if "${{ matrix.features }}"=="HUGE" (
-            nmake -nologo -f Make_mvc2.mak ^
+            nmake -nologo -f Make_mvc.mak ^
               FEATURES=${{ matrix.features }} ^
               GUI=yes IME=yes ICONV=yes VIMDLL=yes ^
               DYNAMIC_LUA=yes LUA=%LUA_DIR% ^
               DYNAMIC_PYTHON=yes PYTHON=%PYTHON_DIR% ^
               DYNAMIC_PYTHON3=yes PYTHON3=%PYTHON3_DIR%
           ) else (
-            nmake -nologo -f Make_mvc2.mak ^
+            nmake -nologo -f Make_mvc.mak ^
               FEATURES=${{ matrix.features }} ^
               GUI=yes IME=yes ICONV=yes VIMDLL=yes
           )
@@ -467,7 +504,7 @@ jobs:
               DYNAMIC_LUA=yes LUA=${LUA_DIR} \
               DYNAMIC_PYTHON=yes PYTHON=${PYTHON_DIR} \
               DYNAMIC_PYTHON3=yes PYTHON3=${PYTHON3_DIR} \
-              STATIC_STDCPLUS=yes
+              STATIC_STDCPLUS=yes COVERAGE=${{ matrix.coverage }}
           else
             mingw32-make -f Make_ming.mak -j2 \
               FEATURES=${{ matrix.features }} \
@@ -475,6 +512,14 @@ jobs:
               STATIC_STDCPLUS=yes
           fi
 
+      - name: Check version
+        shell: cmd
+        run: |
+          PATH %LUA_DIR%;C:\msys64\${{ matrix.msystem }}\bin;%PATH%;%PYTHON3_DIR%
+          src\vim --version || exit 1
+          src\vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-1.vim -c quit
+          src\vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-2.vim -c quit
+
       #- name: Prepare Artifact
       #  shell: cmd
       #  run: |
@@ -488,27 +533,34 @@ jobs:
       #    name: vim${{ matrix.bits }}-${{ matrix.toolchain }}
       #    path: ./artifacts
 
-      - name: Test
+      - name: Copy gcov data files to src2
+        if: matrix.coverage
+        shell: msys2 {0}
+        run: find src -name '*.gcno' | tar -c -T - | tar -x -C src2 --strip-components 1
+
+      - name: Test and show the result of testing gVim
         shell: cmd
         timeout-minutes: 20
         run: |
           PATH %LUA_DIR%;C:\msys64\${{ matrix.msystem }}\bin;%PATH%;%PYTHON3_DIR%
           call "%VCVARSALL%" ${{ matrix.vcarch }}
-          cd src
-          echo.
-          echo %COL_GREEN%vim version:%COL_RESET%
-          .\vim --version || exit 1
 
-          echo %COL_GREEN%Start testing vim in background.%COL_RESET%
-          start cmd /c "cd ..\src2\testdir & nmake -nologo -f Make_dos.mak VIMPROG=..\..\src\vim > nul & echo done>done.txt"
+          echo %COL_GREEN%Start testing Vim in background.%COL_RESET%
+          start cmd /c "cd src2\testdir & nmake -nologo -f Make_dos.mak VIMPROG=..\..\src\vim > nul & echo done>done.txt"
 
-          echo %COL_GREEN%Test gvim:%COL_RESET%
-          cd testdir
+          echo %COL_GREEN%Test gVim:%COL_RESET%
+          cd src\testdir
           nmake -nologo -f Make_dos.mak VIMPROG=..\gvim || exit 1
-          cd ..
 
-          echo %COL_GREEN%Wait for vim tests to finish.%COL_RESET%
-          cd ..\src2\testdir
+      - name: Show the result of testing Vim
+        shell: cmd
+        timeout-minutes: 20
+        run: |
+          PATH %LUA_DIR%;C:\msys64\${{ matrix.msystem }}\bin;%PATH%;%PYTHON3_DIR%
+          call "%VCVARSALL%" ${{ matrix.vcarch }}
+
+          echo %COL_GREEN%Wait for Vim tests to finish.%COL_RESET%
+          cd src2\testdir
           :: Wait about 10 minutes.
           for /L %%i in (1,1,60) do (
             if exist done.txt goto exitloop
@@ -518,10 +570,35 @@ jobs:
           set timeout=1
           :exitloop
 
-          echo %COL_GREEN%Test results of vim:%COL_RESET%
+          echo %COL_GREEN%The result of testing Vim:%COL_RESET%
+          cd src2\testdir
           if exist messages type messages
           nmake -nologo -f Make_dos.mak report VIMPROG=..\..\src\vim || exit 1
+
           if "%timeout%"=="1" (
             echo %COL_RED%Timed out.%COL_RESET%
             exit 1
           )
+
+      - name: Generate gcov files
+        if: matrix.coverage
+        shell: msys2 {0}
+        run: |
+          cd src
+          find . -type f -name '*.gcno' -exec gcov -pb {} + || true
+          cd ../src2
+          find . -type f -name '*.gcno' -exec gcov -pb {} + || true
+
+      - name: Codecov (gVim)
+        if: matrix.coverage
+        uses: codecov/codecov-action@v2
+        with:
+          directory: src
+          flags: windows,${{ matrix.toolchain }}-${{ matrix.arch }}-${{ matrix.features }}-gui
+
+      - name: Codecov (Vim)
+        if: matrix.coverage
+        uses: codecov/codecov-action@v2
+        with:
+          directory: src2
+          flags: windows,${{ matrix.toolchain }}-${{ matrix.arch }}-${{ matrix.features }}

.github/workflows/codeql-analysis.yml

@@ -14,6 +14,13 @@ on:
   schedule:
     - cron: '0 18 * * 1'
 
+# Cancels all previous workflow runs for pull requests that have not completed.
+concurrency:
+  # The concurrency group contains the workflow name and the branch name for
+  # pull requests or the commit hash for any other events.
+  group: ${{ github.workflow }}-${{ github.event_name == 'pull_request' && github.head_ref || github.sha }}
+  cancel-in-progress: true
+
 jobs:
   analyze:
     name: Analyze
@@ -38,7 +45,7 @@ jobs:
       with:
         languages: ${{ matrix.language }}
         # If you wish to specify custom queries, you can do so here or in a config file.
-        # By default, queries listed here will override any specified in a config file. 
+        # By default, queries listed here will override any specified in a config file.
         # Prefix the list here with "+" to use these queries and those in the config file.
         # queries: ./path/to/local/query, your-org/your-repo/queries@main
 

.github/workflows/coverity.yml

@@ -0,0 +1,80 @@
+name: Coverity
+on:
+  schedule:
+    - cron: '42 0 * * *'  # Run once per day, to avoid Coverity's submission limits
+  workflow_dispatch:
+
+jobs:
+  scan:
+    runs-on: ubuntu-18.04
+
+    env:
+      CC: gcc
+      DEBIAN_FRONTEND: noninteractive
+
+    steps:
+      - uses: actions/checkout@v2
+
+      - name: Download Coverity
+        run: |
+          wget -q https://scan.coverity.com/download/cxx/linux64 --post-data "token=$TOKEN&project=vim" -O coverity_tool.tgz
+          mkdir cov-scan
+          tar ax -f coverity_tool.tgz --strip-components=1 -C cov-scan
+        env:
+          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
+
+      - name: Install packages
+        run: |
+          sudo apt update && sudo apt install -y \
+            autoconf \
+            gettext \
+            libcanberra-dev \
+            libperl-dev \
+            python-dev \
+            python3-dev \
+            liblua5.3-dev \
+            lua5.3 \
+            ruby-dev \
+            tcl-dev \
+            libgtk2.0-dev \
+            desktop-file-utils \
+            libtool-bin \
+            libsodium-dev
+
+      - name: Set up environment
+        run: |
+          echo "$(pwd)/cov-scan/bin" >> $GITHUB_PATH
+          (
+          echo "NPROC=$(getconf _NPROCESSORS_ONLN)"
+          echo "CONFOPT=--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
+          ) >> $GITHUB_ENV
+
+      - name: Set up system
+        run: |
+          # Setup lua5.3 manually since its package doesn't provide alternative.
+          # https://bugs.launchpad.net/ubuntu/+source/lua5.3/+bug/1707212
+          sudo update-alternatives --install /usr/bin/lua lua /usr/bin/lua5.3 10
+
+      - name: Configure
+        run: |
+          ./configure --with-features=huge ${CONFOPT} --enable-fail-if-missing
+          # Append various warning flags to CFLAGS.
+          sed -i -f ci/config.mk.sed src/auto/config.mk
+          sed -i -f ci/config.mk.${CC}.sed src/auto/config.mk
+
+      - name: Build/scan vim
+        run: |
+          cov-build --dir cov-int make -j${NPROC}
+
+      - name: Submit results
+        run: |
+          tar zcf cov-scan.tgz cov-int
+          curl --form token=$TOKEN \
+            --form email=$EMAIL \
+            --form file=@cov-scan.tgz \
+            --form version="$(git rev-parse HEAD)" \
+            --form description="Automatic GHA scan" \
+            'https://scan.coverity.com/builds?project=vim'
+        env:
+          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
+          EMAIL: ${{ secrets.COVERITY_SCAN_EMAIL }}

.gitignore

@@ -96,5 +96,10 @@ src/shadow-*
 src/runtime
 src/pixmaps
 
-# other possible files build by tools
+# other files possibly created by tools
 src/cscope.out
+
+# Linter/language server files
+/.cache/clangd/
+/.ccls-cache/
+/compile_commands.json

CONTRIBUTING.md

@@ -57,7 +57,7 @@ If you find a problem with one of these files or have a suggestion for
 improvement, please first try to contact the maintainer directly.
 Look in the header of the file for the name and email address.
 
-The maintainer will take care of issues and send updates to Bram for 
+The maintainer will take care of issues and send updates to Bram for
 distribution with Vim.
 
 If the maintainer does not respond, contact the vim-dev maillist.

Filelist

@@ -7,8 +7,11 @@ SRC_ALL =	\
 		.coveralls.yml \
 		.gitattributes \
 		.github/CODEOWNERS \
+		.github/ISSUE_TEMPLATE/bug_report.yml \
+		.github/ISSUE_TEMPLATE/feature_request.md \
 		.github/workflows/ci.yml \
 		.github/workflows/codeql-analysis.yml \
+		.github/workflows/coverity.yml \
 		.gitignore \
 		.hgignore \
 		.lgtm.yml \
@@ -23,6 +26,7 @@ SRC_ALL =	\
 		ci/setup-xvfb.sh \
 		src/Make_all.mak \
 		src/README.md \
+		src/alloc.c \
 		src/alloc.h \
 		src/arabic.c \
 		src/arglist.c \
@@ -68,6 +72,7 @@ SRC_ALL =	\
 		src/fileio.c \
 		src/filepath.c \
 		src/findfile.c \
+		src/float.c \
 		src/fold.c \
 		src/getchar.c \
 		src/globals.h \
@@ -108,6 +113,8 @@ SRC_ALL =	\
 		src/nbdebug.h \
 		src/netbeans.c \
 		src/normal.c \
+		src/nv_cmdidxs.h \
+		src/nv_cmds.h \
 		src/ops.c \
 		src/option.c \
 		src/option.h \
@@ -133,12 +140,13 @@ SRC_ALL =	\
 		src/spell.h \
 		src/spellfile.c \
 		src/spellsuggest.c \
+		src/strings.c \
 		src/structs.h \
 		src/syntax.c \
 		src/tag.c \
 		src/term.c \
 		src/terminal.c \
-		src/term.h \
+		src/termdefs.h \
 		src/termlib.c \
 		src/testing.c \
 		src/textformat.c \
@@ -154,8 +162,11 @@ SRC_ALL =	\
 		src/version.h \
 		src/vim.h \
 		src/vim9.h \
+		src/vim9cmds.c \
 		src/vim9compile.c \
 		src/vim9execute.c \
+		src/vim9expr.c \
+		src/vim9instr.c \
 		src/vim9script.c \
 		src/vim9type.c \
 		src/viminfo.c \
@@ -187,7 +198,6 @@ SRC_ALL =	\
 		src/testdir/view_util.vim \
 		src/testdir/test[0-9]*.ok \
 		src/testdir/test77a.ok \
-		src/testdir/test83-tags? \
 		src/testdir/test77a.com \
 		src/testdir/test_*.vim \
 		src/testdir/python2/*.py \
@@ -208,6 +218,7 @@ SRC_ALL =	\
 		src/testdir/popupbounce.vim \
 		src/proto.h \
 		src/protodef.h \
+		src/proto/alloc.pro \
 		src/proto/arabic.pro \
 		src/proto/arglist.pro \
 		src/proto/autocmd.pro \
@@ -246,6 +257,7 @@ SRC_ALL =	\
 		src/proto/fileio.pro \
 		src/proto/filepath.pro \
 		src/proto/findfile.pro \
+		src/proto/float.pro \
 		src/proto/fold.pro \
 		src/proto/getchar.pro \
 		src/proto/gui.pro \
@@ -294,6 +306,7 @@ SRC_ALL =	\
 		src/proto/spell.pro \
 		src/proto/spellfile.pro \
 		src/proto/spellsuggest.pro \
+		src/proto/strings.pro \
 		src/proto/syntax.pro \
 		src/proto/tag.pro \
 		src/proto/term.pro \
@@ -310,8 +323,11 @@ SRC_ALL =	\
 		src/proto/usercmd.pro \
 		src/proto/userfunc.pro \
 		src/proto/version.pro \
+		src/proto/vim9cmds.pro \
 		src/proto/vim9compile.pro \
 		src/proto/vim9execute.pro \
+		src/proto/vim9expr.pro \
+		src/proto/vim9instr.pro \
 		src/proto/vim9script.pro \
 		src/proto/vim9type.pro \
 		src/proto/viminfo.pro \
@@ -369,6 +385,7 @@ SRC_ALL =	\
 		src/libvterm/t/30state_pen.test \
 		src/libvterm/t/31state_rep.test \
 		src/libvterm/t/32state_flow.test \
+		src/libvterm/t/40state_selection.test \
 		src/libvterm/t/60screen_ascii.test \
 		src/libvterm/t/61screen_unicode.test \
 		src/libvterm/t/62screen_damage.test \
@@ -427,10 +444,8 @@ SRC_UNIX =	\
 		src/configure \
 		src/configure.ac \
 		src/create_cmdidxs.vim \
-		src/gui_at_fs.c \
-		src/gui_at_sb.c \
-		src/gui_at_sb.h \
-		src/gui_athena.c \
+		src/create_nvcmdidxs.c \
+		src/create_nvcmdidxs.vim \
 		src/gui_gtk.c \
 		src/gui_gtk_f.c \
 		src/gui_gtk_f.h \
@@ -455,7 +470,6 @@ SRC_UNIX =	\
 		src/osdef1.h.in \
 		src/osdef2.h.in \
 		src/pathdef.sh \
-		src/proto/gui_athena.pro \
 		src/proto/gui_gtk.pro \
 		src/proto/gui_gtk_x11.pro \
 		src/proto/gui_gtk_gresources.pro \
@@ -481,7 +495,6 @@ SRC_UNIX =	\
 SRC_DOS_UNIX =	\
 		src/gui_xim.c \
 		src/if_cscope.c \
-		src/if_cscope.h \
 		src/if_lua.c \
 		src/if_mzsch.c \
 		src/if_mzsch.h \
@@ -528,18 +541,14 @@ SRC_DOS =	\
 		tools/rename.bat \
 		src/bigvim.bat \
 		src/bigvim64.bat \
-		src/msvcsetup.bat \
 		src/msvc2008.bat \
 		src/msvc2010.bat \
 		src/msvc2015.bat \
 		src/msys32.bat \
 		src/msys64.bat \
-		src/dimm.idl \
 		src/dlldata.c \
 		src/dosinst.c \
 		src/dosinst.h \
-		src/glbl_ime.cpp \
-		src/glbl_ime.h \
 		src/gui_dwrite.cpp \
 		src/gui_dwrite.h \
 		src/gui_w32.c \
@@ -617,6 +626,7 @@ SRC_DOS_BIN =	\
 		src/xpm/x86/lib-vc14/libXpm.lib \
 		src/xpm/x86/lib/libXpm.a \
 		src/xpm/x86/lib/libXpm.lib \
+		runtime/bitmaps/vim.ico \
 		nsis/icons.zip \
 
 # source files for Amiga, DOS, etc. (also in the extra archive)
@@ -648,10 +658,7 @@ SRC_HAIKU =	\
 # source files for the Mac (also in the extra archive)
 SRC_MAC =	\
 		src/INSTALLmac.txt \
-		src/dehqx.py \
-		src/os_mac_rsrc/*.icns \
 		src/os_mac.h \
-		src/os_mac.rsr.hqx \
 		src/os_mac_conv.c \
 		src/os_macosx.m \
 		src/proto/os_mac_conv.pro \
@@ -689,7 +696,6 @@ SRC_EXTRA =	\
 		$(SRC_QNX) \
 		$(SRC_VMS) \
 		README_os390.txt \
-		src/infplist.xml \
 		src/link.390 \
 		src/os_vms_fix.com \
 		src/toolbar.phi \
@@ -791,6 +797,7 @@ RT_SCRIPTS =	\
 		runtime/autoload/xml/*.vim \
 		runtime/colors/*.vim \
 		runtime/colors/README.txt \
+		runtime/colors/lists/*.vim \
 		runtime/colors/tools/*.vim \
 		runtime/compiler/*.vim \
 		runtime/compiler/README.txt \
@@ -843,7 +850,6 @@ RT_AMI_DOS =	\
 # DOS runtime (also in the extra archive)
 RT_DOS =	\
 		README_dos.txt \
-		runtime/rgb.txt \
 		vimtutor.bat \
 
 # DOS runtime without CR-LF translation (also in the extra archive)
@@ -989,6 +995,7 @@ LANG_GEN = \
 		runtime/doc/*-tr.1 \
 		runtime/doc/*-tr.UTF-8.1 \
 		runtime/lang/README.txt \
+		runtime/lang/Makefile \
 		runtime/lang/menu_*.vim \
 		runtime/keymap/README.txt \
 		runtime/keymap/*.vim \

README.md

@@ -4,6 +4,12 @@
 
 <sub>For translations of this README see the end.</sub>
 
+If you find a bug or want to discuss the best way to add a new feature, please
+open an [issue](https://github.com/vim/vim/issues).
+If you have a question or want to discuss the best way to do something with
+Vim, you can use [StackExchange](https://vi.stackexchange.com/)
+or one of the [Maillists](https://www.vim.org/community.php).
+
 
 ## What is Vim? ##
 
@@ -40,7 +46,7 @@ This `README.md` file comes with the runtime archive.  It includes the
 documentation, syntax files and other files that are used at runtime.  To run
 Vim you must get either one of the binary archives or a source archive.
 Which one you need depends on the system you want to run it on and whether you
-want or must compile it yourself.  Check http://www.vim.org/download.php for
+want or must compile it yourself.  Check https://www.vim.org/download.php for
 an overview of currently available distributions.
 
 Some popular places to get the latest Vim:
@@ -80,7 +86,7 @@ The Vim tutor is a one hour training course for beginners.  Often it can be
 started as `vimtutor`.  See `:help tutor` for more information.
 
 The best is to use `:help` in Vim.  If you don't have an executable yet, read
-[`runtime/doc/help.txt`](/runtime/doc/help.txt). 
+[`runtime/doc/help.txt`](/runtime/doc/help.txt).
 It contains pointers to the other documentation files.
 The User Manual reads like a book and is recommended to learn to use
 Vim.  See `:help user-manual`.
@@ -111,7 +117,7 @@ in Uganda.  See [`runtime/doc/uganda.txt`](runtime/doc/uganda.txt).  But
 at the same time donations increase Bram's motivation to keep working on Vim!
 
 For the most recent information about sponsoring look on the Vim web site:
-	http://www.vim.org/sponsor/
+	https://www.vim.org/sponsor/
 
 
 ## Contributing ##
@@ -123,15 +129,15 @@ If you would like to help making Vim better, see the
 ## Information ##
 
 The latest news about Vim can be found on the Vim home page:
-	http://www.vim.org/
+	https://www.vim.org/
 
 If you have problems, have a look at the Vim documentation or tips:
-	http://www.vim.org/docs.php
-	http://vim.wikia.com/wiki/Vim_Tips_Wiki
+	https://www.vim.org/docs.php
+	https://vim.fandom.com/wiki/Vim_Tips_Wiki
 
 If you still have problems or any other questions, use one of the mailing
 lists to discuss them with Vim users and developers:
-	http://www.vim.org/maillist.php
+	https://www.vim.org/maillist.php
 
 If nothing else works, report bugs directly:
 	Bram Moolenaar <Bram@vim.org>

README.txt

@@ -33,7 +33,7 @@ This README.txt file comes with the runtime archive.  It includes the
 documentation, syntax files and other files that are used at runtime.  To run
 Vim you must get either one of the binary archives or a source archive.
 Which one you need depends on the system you want to run it on and whether you
-want or must compile it yourself.  Check "http://www.vim.org/download.php" for
+want or must compile it yourself.  Check "https://www.vim.org/download.php" for
 an overview of currently available distributions.
 
 Some popular places to get the latest Vim:
@@ -101,7 +101,7 @@ increase Bram's motivation to keep working on Vim!
 
 For the most recent information about sponsoring look on the Vim web site:
 
-	http://www.vim.org/sponsor/
+	https://www.vim.org/sponsor/
 
 
 CONTRIBUTING
@@ -112,15 +112,15 @@ If you would like to help making Vim better, see the CONTRIBUTING.md file.
 INFORMATION
 
 The latest news about Vim can be found on the Vim home page:
-	http://www.vim.org/
+	https://www.vim.org/
 
 If you have problems, have a look at the Vim documentation or tips:
-	http://www.vim.org/docs.php
-	http://vim.wikia.com/wiki/Vim_Tips_Wiki
+	https://www.vim.org/docs.php
+	https://vim.fandom.com/wiki/Vim_Tips_Wiki
 
 If you still have problems or any other questions, use one of the mailing
 lists to discuss them with Vim users and developers:
-	http://www.vim.org/maillist.php
+	https://www.vim.org/maillist.php
 
 If nothing else works, report bugs directly:
 	Bram Moolenaar <Bram@vim.org>

README_VIM9.md

@@ -45,14 +45,16 @@ full code is below):
 | Vim old | 5.018541 |
 | Python  | 0.369598 |
 | Lua     | 0.078817 |
+| LuaJit  | 0.004245 |
 | Vim new | 0.073595 |
 
 That looks very promising!  It's just one example, but it shows how much
 we can gain, and also that Vim script can be faster than builtin
 interfaces.
 
-In practice the script would not do something useless as counting but change
-the text.  For example, reindent all the lines:
+LuaJit is much faster at Lua-only instructions.  In practice the script would
+not do something useless as counting but change the text.  For example,
+reindent all the lines:
 
 ``` vim
   let totallen = 0
@@ -64,13 +66,17 @@ the text.  For example, reindent all the lines:
 
 | how     | time in sec |
 | --------| -------- |
-| Vim old | 0.853752 |
-| Python  | 0.304584 |
-| Lua     | 0.286573 |
-| Vim new | 0.190276 |
+| Vim old | 0.578598 |
+| Python  | 0.152040 |
+| Lua     | 0.164917 |
+| LuaJit  | 0.128400 |
+| Vim new | 0.079692 |
+
+[These times were measured on a different system by Dominique Pelle]
 
 The differences are smaller, but Vim 9 script is clearly the fastest.
-Using LuaJIT gives 0.25, only a little bit faster than plain Lua.
+Using LuaJIT is only a little bit faster than plain Lua here, clearly the call
+back to the Vim code is costly.
 
 How does Vim9 script work?  The function is first compiled into a sequence of
 instructions.  Each instruction has one or two parameters and a stack is
@@ -331,7 +337,7 @@ let start = reltime()
 echo Python()
 echo 'Python: ' .. reltimestr(reltime(start))
 bwipe!
- 
+
 new
 call setline(1, range(100000))
 let start = reltime()

READMEdir/README_extra.txt

@@ -26,7 +26,6 @@ src/os_win32.*		Files for the Win32 port.
 src/gui_w32.*		Files for the Win32 GUI.
 src/gui_w48.*		Files for the Win32 and Win16 GUI.
 src/Make_mvc.mak	MS Visual C++ makefile for the Win32 GUI.
-runtime/rgb.txt		File with color definitions for the Win32 GUI.
 
 src/if_ole.*		OLE automation interface, for MS Windows 95 and NT.
 

ci/appveyor.bat

@@ -5,11 +5,9 @@ setlocal ENABLEDELAYEDEXPANSION
 cd %APPVEYOR_BUILD_FOLDER%
 
 cd src
-:: Filter out the progress bar from the build log
-sed -e "s/@<<$/@<< | sed -e 's#.*\\\\r.*##'/" Make_mvc.mak > Make_mvc2.mak
 
 echo "Building MSVC 64bit console Version"
-nmake -f Make_mvc2.mak CPU=AMD64 ^
+nmake -f Make_mvc.mak CPU=AMD64 ^
     OLE=no GUI=no IME=yes ICONV=yes DEBUG=no ^
     FEATURES=%FEATURE%
 if not exist vim.exe (
@@ -21,13 +19,13 @@ if not exist vim.exe (
 :: GUI needs to be last, so that testing works
 echo "Building MSVC 64bit GUI Version"
 if "%FEATURE%" == "HUGE" (
-    nmake -f Make_mvc2.mak CPU=AMD64 ^
+    nmake -f Make_mvc.mak CPU=AMD64 ^
         OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no POSTSCRIPT=yes ^
         PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27-x64 ^
         PYTHON3_VER=35 DYNAMIC_PYTHON3=yes PYTHON3=C:\Python35-x64 ^
         FEATURES=%FEATURE%
 ) ELSE (
-    nmake -f Make_mvc2.mak CPU=AMD64 ^
+    nmake -f Make_mvc.mak CPU=AMD64 ^
         OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no ^
         FEATURES=%FEATURE%
 )

ci/config.mk.clang-12.sed

@@ -0,0 +1,3 @@
+# Clang 12 (or Apple clang 13) and later makes a warning '-Wcompound-token-split-by-macro' enable by default.
+/^PERL_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/
+/^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/

ci/config.mk.clang.sed

@@ -1,2 +1,2 @@
 /^CFLAGS[[:blank:]]*=/s/$/ -Wno-error=missing-field-initializers/
-/^RUBY_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=unknown-attributes -Wno-error=ignored-attributes/
+/^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unknown-attributes -Wno-error=ignored-attributes/

ci/config.mk.sed

@@ -1,2 +1,3 @@
 /^CFLAGS[[:blank:]]*=/s/$/ -Wall -Wextra -Wshadow -Werror/
-/^PERL_CFLAGS[[:blank:]]*=/s/$/ -Wno-error=unused-function/
+/^PERL_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unused-function/
+/^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unused-parameter/

nsis/README.txt

@@ -74,7 +74,7 @@ Unpack the images:
 	cd nsis
 	unzip icons.zip
 
-To build then, enter:
+Then build gvim.exe:
 
 	cd nsis
 	makensis gvim.nsi

nsis/gvim.nsi

@@ -126,10 +126,11 @@ RequestExecutionLevel highest
 # This adds '\Vim' to the user choice automagically.  The actual value is
 # obtained below with CheckOldVim.
 !ifdef WIN64
-InstallDir "$PROGRAMFILES64\Vim"
+  !define DEFAULT_INSTDIR "$PROGRAMFILES64\Vim"
 !else
-InstallDir "$PROGRAMFILES\Vim"
+  !define DEFAULT_INSTDIR "$PROGRAMFILES\Vim"
 !endif
+InstallDir ${DEFAULT_INSTDIR}
 
 # Types of installs we can perform:
 InstType $(str_type_typical)
@@ -346,6 +347,9 @@ Section "$(str_section_exe)" id_section_exe
 	File /oname=gvim.exe ${VIMSRC}\gvim_ole.exe
 !if /FileExists "${VIMSRC}\vim${BIT}.dll"
 	File ${VIMSRC}\vim${BIT}.dll
+!endif
+!if /FileExists "${VIMRT}\libsodium.dll"
+	File ${VIMRT}\libsodium.dll
 !endif
 	File /oname=install.exe ${VIMSRC}\installw32.exe
 	File /oname=uninstall.exe ${VIMSRC}\uninstallw32.exe
@@ -356,7 +360,6 @@ Section "$(str_section_exe)" id_section_exe
 	File ..\README.txt
 	File ..\uninstall.txt
 	File ${VIMRT}\*.vim
-	File ${VIMRT}\rgb.txt
 
 	File ${VIMTOOLS}\diff.exe
 	File ${VIMTOOLS}\winpty${BIT}.dll
@@ -366,6 +369,8 @@ Section "$(str_section_exe)" id_section_exe
 	File ${VIMRT}\colors\*.*
 	SetOutPath $0\colors\tools
 	File ${VIMRT}\colors\tools\*.*
+	SetOutPath $0\colors\lists
+	File ${VIMRT}\colors\lists\*.*
 
 	SetOutPath $0\compiler
 	File ${VIMRT}\compiler\*.*
@@ -398,6 +403,9 @@ Section "$(str_section_exe)" id_section_exe
 	SetOutPath $0\autoload\xml
 	File ${VIMRT}\autoload\xml\*.*
 
+	SetOutPath $0\bitmaps
+	File ${VIMSRC}\vim.ico
+
 	SetOutPath $0\syntax
 	File ${VIMRT}\syntax\*.*
 
@@ -710,8 +718,13 @@ Function .onInit
   !insertmacro MUI_LANGDLL_DISPLAY
 !endif
 
-  # Check $VIM
-  ReadEnvStr $INSTDIR "VIM"
+  ${If} $INSTDIR == ${DEFAULT_INSTDIR}
+    # Check $VIM
+    ReadEnvStr $3 "VIM"
+    ${If} $3 != ""
+      StrCpy $INSTDIR $3
+    ${EndIf}
+  ${EndIf}
 
   call CheckOldVim
   Pop $3
@@ -721,20 +734,11 @@ Function .onInit
     SectionSetInstTypes ${id_section_old_ver} 0
     SectionSetText ${id_section_old_ver} ""
   ${Else}
-    ${If} $INSTDIR == ""
+    ${If} $INSTDIR == ${DEFAULT_INSTDIR}
       StrCpy $INSTDIR $3
     ${EndIf}
   ${EndIf}
 
-  # If did not find a path: use the default dir.
-  ${If} $INSTDIR == ""
-!ifdef WIN64
-    StrCpy $INSTDIR "$PROGRAMFILES64\Vim"
-!else
-    StrCpy $INSTDIR "$PROGRAMFILES\Vim"
-!endif
-  ${EndIf}
-
   ${If} ${RunningX64}
     SetRegView 64
   ${EndIf}

nsis/lang/turkish.nsi

@@ -10,7 +10,7 @@ LangString ^SetupCaption     ${LANG_TURKISH} \
         "$(^Name) Setup"
 LangString ^UninstallCaption ${LANG_TURKISH} \
         "$(^Name) Uninstall"
-        
+
 LangString str_show_readme          ${LANG_TURKISH} \
     "Kurulum bittikten sonra README dosyasını aç"
 
@@ -23,7 +23,7 @@ LangString str_type_minimal         ${LANG_TURKISH} \
 
 LangString str_type_full            ${LANG_TURKISH} \
     "Tam"
-    
+
 ##############################################################################
 # Section Titles & Description                                            {{{1
 ##############################################################################
@@ -62,12 +62,12 @@ LangString str_section_start_menu   ${LANG_TURKISH} \
     "Başlat Menüsü - Programlar klasöründe"
 LangString str_desc_start_menu      ${LANG_TURKISH} \
     "Vim kısayolunu Başlat Menüsüne ekler."
-    
+
 LangString str_section_edit_with    ${LANG_TURKISH} \
     "Vim ile Aç"
 LangString str_desc_edit_with       ${LANG_TURKISH} \
     "Vim'i $\"Birlikte aç$\" sağ tık menüsüne ekler."
-    
+
  LangString str_section_vim_rc       ${LANG_TURKISH} \
     "Bir yapılandırma dosyası oluştur"
 LangString str_desc_vim_rc          ${LANG_TURKISH} \
@@ -93,7 +93,7 @@ LangString str_desc_plugin_vim      ${LANG_TURKISH} \
 LangString str_section_vis_vim      ${LANG_TURKISH} \
     "VisVim eklentisi"
 LangString str_desc_vis_vim         ${LANG_TURKISH} \
-    "Microsoft Visual Studio entegrasyonu için VisVim eklentisi" 
+    "Microsoft Visual Studio entegrasyonu için VisVim eklentisi"
 
 LangString str_section_nls          ${LANG_TURKISH} \
     "Ek dil desteği"
@@ -129,14 +129,14 @@ LangString str_unsection_rootdir    ${LANG_TURKISH} \
     "Vim kök dizinini kaldır"
 LangString str_desc_rm_rootdir      ${LANG_TURKISH} \
     "Vim kök dizinini kaldırır. Bu dizin Vim yapılandırma dosyalarını içerir!"
-    
+
  LangString str_msg_install_fail  ${LANG_TURKISH} \
     "Yükleme başarısız oldu. Yeniden deneyin."
 
 LangString str_msg_rm_exe_fail   ${LANG_TURKISH} \
     "$0 içindeki bazı dosyalar silinemedi!$\r$\n\
      Bu dosyaları el ile kaldırmalısınız."
-     
+
  LangString str_msg_uninstalling  ${LANG_TURKISH} \
     "Eski sürüm kaldırılıyor..."
 

pixmaps/gen-inline-pixbufs.sh

@@ -3,11 +3,9 @@
 prefix=stock_
 list=
 
-for file in "$@"
-do
-    name=`echo "$file" | sed 's|-|_|g; s|^.*/||; s|\..*$||'`
+for file in "$@"; do
+    name=$(echo "$file" | sed 's|-|_|g; s|^.*/||; s|\..*$||')
     list="$list $prefix$name $file"
 done
 
 gdk-pixbuf-csource --raw --static --build-list $list
-

runtime/autoload/ada.vim

@@ -67,13 +67,13 @@ if exists ('g:ada_with_gnat_project_files')
     endfor
 endif
 
-" Section: add	standart exception {{{2
+" Section: add	standard exception {{{2
 "
 for Item in ['Constraint_Error', 'Program_Error', 'Storage_Error', 'Tasking_Error', 'Status_Error', 'Mode_Error', 'Name_Error', 'Use_Error', 'Device_Error', 'End_Error', 'Data_Error', 'Layout_Error', 'Length_Error', 'Pattern_Error', 'Index_Error', 'Translation_Error', 'Time_Error', 'Argument_Error', 'Tag_Error', 'Picture_Error', 'Terminator_Error', 'Conversion_Error', 'Pointer_Error', 'Dereference_Error', 'Update_Error']
     let g:ada#Keywords += [{
 	    \ 'word':  Item,
 	    \ 'menu':  'exception',
-	    \ 'info':  'Ada standart exception.',
+	    \ 'info':  'Ada standard exception.',
 	    \ 'kind':  'x',
 	    \ 'icase': 1}]
 endfor
@@ -210,7 +210,7 @@ function ada#Word (...)
    let l:Line = substitute (getline (l:Line_Nr), g:ada#Comment, '', '' )
 
    " Cope with tag searching for items in comments; if we are, don't loop
-   " backards looking for previous lines
+   " backwards looking for previous lines
    if l:Column_Nr > strlen(l:Line)
       " We were in a comment
       let l:Line = getline(l:Line_Nr)

runtime/autoload/adacomplete.vim

@@ -14,7 +14,7 @@
 "		15.10.2006 MK Bram's suggestion for runtime integration
 "		05.11.2006 MK Bram suggested not to use include protection for
 "			      autoload
-"		05.11.2006 MK Bram suggested agaist using setlocal omnifunc 
+"		05.11.2006 MK Bram suggested against using setlocal omnifunc 
 "		05.11.2006 MK Bram suggested to save on spaces
 "    Help Page: ft-ada-omni
 "------------------------------------------------------------------------------

runtime/autoload/csscomplete.vim

@@ -4,7 +4,7 @@
 "           plus CSS Speech Module <http://www.w3.org/TR/css3-speech/>
 " Maintainer: Kao, Wei-Ko(othree) ( othree AT gmail DOT com )
 " Original Author: Mikolaj Machowski ( mikmach AT wp DOT pl )
-" Last Change: 2018 Jul 02
+" Last Change: 2021 Sep 21
 
 let s:values = split("all additive-symbols align-content align-items align-self animation animation-delay animation-direction animation-duration animation-fill-mode animation-iteration-count animation-name animation-play-state animation-timing-function backface-visibility background background-attachment background-blend-mode background-clip background-color background-image background-origin background-position background-repeat background-size block-size border border-block-end border-block-end-color border-block-end-style border-block-end-width border-block-start border-block-start-color border-block-start-style border-block-start-width border-bottom border-bottom-color border-bottom-left-radius border-bottom-right-radius border-bottom-style border-bottom-width border-collapse border-color border-image border-image-outset border-image-repeat border-image-slice border-image-source border-image-width border-inline-end border-inline-end-color border-inline-end-style border-inline-end-width border-inline-start border-inline-start-color border-inline-start-style border-inline-start-width border-left border-left-color border-left-style border-left-width border-radius border-right border-right-color border-right-style border-right-width border-spacing border-style border-top border-top-color border-top-left-radius border-top-right-radius border-top-style border-top-width border-width bottom box-decoration-break box-shadow box-sizing break-after break-before break-inside caption-side clear clip clip-path color columns column-count column-fill column-gap column-rule column-rule-color column-rule-style column-rule-width column-span column-width content counter-increment counter-reset cue cue-before cue-after cursor direction display empty-cells fallback filter flex flex-basis flex-direction flex-flow flex-grow flex-shrink flex-wrap float font font-family font-feature-settings font-kerning font-language-override font-size font-size-adjust font-stretch font-style font-synthesis font-variant font-variant-alternates font-variant-caps font-variant-east-asian font-variant-ligatures font-variant-numeric font-variant-position font-weight grid grid-area grid-auto-columns grid-auto-flow grid-auto-position grid-auto-rows grid-column grid-column-start grid-column-end grid-row grid-row-start grid-row-end grid-template grid-template-areas grid-template-rows grid-template-columns height hyphens image-rendering image-resolution image-orientation ime-mode inline-size isolation justify-content left letter-spacing line-break line-height list-style list-style-image list-style-position list-style-type margin margin-block-end margin-block-start margin-bottom margin-inline-end margin-inline-start margin-left margin-right margin-top marks mask mask-type max-block-size max-height max-inline-size max-width max-zoom min-block-size min-height min-inline-size min-width min-zoom mix-blend-mode negative object-fit object-position offset-block-end offset-block-start offset-inline-end offset-inline-start opacity order orientation orphans outline outline-color outline-offset outline-style outline-width overflow overflow-wrap overflow-x overflow-y pad padding padding-block-end padding-block-start padding-bottom padding-inline-end padding-inline-start padding-left padding-right padding-top page-break-after page-break-before page-break-inside pause-before pause-after pause perspective perspective-origin pointer-events position prefix quotes range resize rest rest-before rest-after right ruby-align ruby-merge ruby-position scroll-behavior scroll-snap-coordinate scroll-snap-destination scroll-snap-points-x scroll-snap-points-y scroll-snap-type scroll-snap-type-x scroll-snap-type-y shape-image-threshold shape-margin shape-outside speak speak-as suffix symbols system table-layout tab-size text-align text-align-last text-combine-upright text-decoration text-decoration-color text-decoration-line text-emphasis text-emphasis-color text-emphasis-position text-emphasis-style text-indent text-orientation text-overflow text-rendering text-shadow text-transform text-underline-position top touch-action transform transform-box transform-origin transform-style transition transition-delay transition-duration transition-property transition-timing-function unicode-bidi unicode-range user-zoom vertical-align visibility voice-balance voice-duration voice-family voice-pitch voice-rate voice-range voice-stress voice-volume white-space widows width will-change word-break word-spacing word-wrap writing-mode z-index zoom")
 
@@ -38,12 +38,12 @@ function! csscomplete#CompleteCSS(findstart, base)
   if exists("b:compl_context")
     let line = getline('.')
     let compl_begin = col('.') - 2
-    let after = line[compl_begin:]
+    let b:after = line[compl_begin:]
     let line = b:compl_context
     unlet! b:compl_context
   else
     let line = a:base
-    let after = ''
+    let b:after = ''
   endif
 
   let res = []
@@ -311,7 +311,7 @@ function! csscomplete#CompleteCSS(findstart, base)
       let values = ["normal", "italic", "oblique", "small-caps", "bold", "bolder", "lighter", "100", "200", "300", "400", "500", "600", "700", "800", "900", "xx-small", "x-small", "small", "medium", "large", "x-large", "xx-large", "larger", "smaller", "sans-serif", "serif", "monospace", "cursive", "fantasy", "caption", "icon", "menu", "message-box", "small-caption", "status-bar"]
     elseif prop =~ '^\%(height\|width\)$'
       let values = ["auto", "border-box", "content-box", "max-content", "min-content", "available", "fit-content"]
-    elseif prop =~ '^\%(left\|rigth\)$'
+    elseif prop =~ '^\%(left\|right\)$'
       let values = ["auto"]
     elseif prop == 'image-rendering'
       let values = ["auto", "crisp-edges", "pixelated"]

runtime/autoload/decada.vim

@@ -23,7 +23,7 @@ endif
 
 function decada#Unit_Name () dict				     " {{{1
     "	Convert filename into acs unit:
-    "	    1:  remove the file extenstion.
+    "	    1:  remove the file extension.
     "	    2:  replace all double '_' or '-' with an dot (which denotes a separate)
     "	    3:  remove a trailing '_' (which denotes a specification)
     return substitute (substitute (expand ("%:t:r"), '__\|-', ".", "g"), '_$', "", '')

runtime/autoload/dist/script.vim

@@ -0,0 +1,426 @@
+vim9script
+
+# Vim function for detecting a filetype from the file contents.
+# Invoked from "scripts.vim" in 'runtimepath'
+#
+# Maintainer:	Bram Moolenaar <Bram@vim.org>
+# Last Change:	2022 Feb 13
+
+export def DetectFiletype()
+  var line1 = getline(1)
+  if line1[0] == '#' && line1[1] == '!'
+    # File that starts with "#!".
+    DetectFromHashBang(line1)
+  else
+    # File does not start with "#!".
+    DetectFromText(line1)
+  endif
+enddef
+
+# Called for a script that has "#!" in the first line.
+def DetectFromHashBang(firstline: string)
+  var line1 = firstline
+
+  # Check for a line like "#!/usr/bin/env {options} bash".  Turn it into
+  # "#!/usr/bin/bash" to make matching easier.
+  # Recognize only a few {options} that are commonly used.
+  if line1 =~ '^#!\s*\S*\<env\s'
+    line1 = substitute(line1, '\S\+=\S\+', '', 'g')
+    line1 = substitute(line1, '\(-[iS]\|--ignore-environment\|--split-string\)', '', '')
+    line1 = substitute(line1, '\<env\s\+', '', '')
+  endif
+
+  # Get the program name.
+  # Only accept spaces in PC style paths: "#!c:/program files/perl [args]".
+  # If the word env is used, use the first word after the space:
+  # "#!/usr/bin/env perl [path/args]"
+  # If there is no path use the first word: "#!perl [path/args]".
+  # Otherwise get the last word after a slash: "#!/usr/bin/perl [path/args]".
+  var name: string
+  if line1 =~ '^#!\s*\a:[/\\]'
+    name = substitute(line1, '^#!.*[/\\]\(\i\+\).*', '\1', '')
+  elseif line1 =~ '^#!.*\<env\>'
+    name = substitute(line1, '^#!.*\<env\>\s\+\(\i\+\).*', '\1', '')
+  elseif line1 =~ '^#!\s*[^/\\ ]*\>\([^/\\]\|$\)'
+    name = substitute(line1, '^#!\s*\([^/\\ ]*\>\).*', '\1', '')
+  else
+    name = substitute(line1, '^#!\s*\S*[/\\]\(\i\+\).*', '\1', '')
+  endif
+
+  # tcl scripts may have #!/bin/sh in the first line and "exec wish" in the
+  # third line.  Suggested by Steven Atkinson.
+  if getline(3) =~ '^exec wish'
+    name = 'wish'
+  endif
+
+  # Bourne-like shell scripts: bash bash2 ksh ksh93 sh
+  if name =~ '^\(bash\d*\|\|ksh\d*\|sh\)\>'
+    call dist#ft#SetFileTypeSH(line1)
+
+    # csh scripts
+  elseif name =~ '^csh\>'
+    if exists("g:filetype_csh")
+      call dist#ft#SetFileTypeShell(g:filetype_csh)
+    else
+      call dist#ft#SetFileTypeShell("csh")
+    endif
+
+    # tcsh scripts
+  elseif name =~ '^tcsh\>'
+    call dist#ft#SetFileTypeShell("tcsh")
+
+    # Z shell scripts
+  elseif name =~ '^zsh\>'
+    set ft=zsh
+
+    # TCL scripts
+  elseif name =~ '^\(tclsh\|wish\|expectk\|itclsh\|itkwish\)\>'
+    set ft=tcl
+
+    # Expect scripts
+  elseif name =~ '^expect\>'
+    set ft=expect
+
+    # Gnuplot scripts
+  elseif name =~ '^gnuplot\>'
+    set ft=gnuplot
+
+    # Makefiles
+  elseif name =~ 'make\>'
+    set ft=make
+
+    # Pike
+  elseif name =~ '^pike\%(\>\|[0-9]\)'
+    set ft=pike
+
+    # Lua
+  elseif name =~ 'lua'
+    set ft=lua
+
+    # Perl
+  elseif name =~ 'perl'
+    set ft=perl
+
+    # PHP
+  elseif name =~ 'php'
+    set ft=php
+
+    # Python
+  elseif name =~ 'python'
+    set ft=python
+
+    # Groovy
+  elseif name =~ '^groovy\>'
+    set ft=groovy
+
+    # Raku
+  elseif name =~ 'raku'
+    set ft=raku
+
+    # Ruby
+  elseif name =~ 'ruby'
+    set ft=ruby
+
+    # JavaScript
+  elseif name =~ 'node\(js\)\=\>\|js\>' || name =~ 'rhino\>'
+    set ft=javascript
+
+    # BC calculator
+  elseif name =~ '^bc\>'
+    set ft=bc
+
+    # sed
+  elseif name =~ 'sed\>'
+    set ft=sed
+
+    # OCaml-scripts
+  elseif name =~ 'ocaml'
+    set ft=ocaml
+
+    # Awk scripts; also finds "gawk"
+  elseif name =~ 'awk\>'
+    set ft=awk
+
+    # Website MetaLanguage
+  elseif name =~ 'wml'
+    set ft=wml
+
+    # Scheme scripts
+  elseif name =~ 'scheme'
+    set ft=scheme
+
+    # CFEngine scripts
+  elseif name =~ 'cfengine'
+    set ft=cfengine
+
+    # Erlang scripts
+  elseif name =~ 'escript'
+    set ft=erlang
+
+    # Haskell
+  elseif name =~ 'haskell'
+    set ft=haskell
+
+    # Scala
+  elseif name =~ 'scala\>'
+    set ft=scala
+
+    # Clojure
+  elseif name =~ 'clojure'
+    set ft=clojure
+
+    # Free Pascal
+  elseif name =~ 'instantfpc\>'
+    set ft=pascal
+
+    # Fennel
+  elseif name =~ 'fennel\>'
+    set ft=fennel
+
+    # MikroTik RouterOS script
+  elseif name =~ 'rsc\>'
+    set ft=routeros
+
+    # Fish shell
+  elseif name =~ 'fish\>'
+    set ft=fish
+
+    # Gforth
+  elseif name =~ 'gforth\>'
+    set ft=forth
+
+  endif
+enddef
+
+
+# Called for a script that does not have "#!" in the first line.
+def DetectFromText(line1: string)
+  var line2 = getline(2)
+  var line3 = getline(3)
+  var line4 = getline(4)
+  var line5 = getline(5)
+
+  # Bourne-like shell scripts: sh ksh bash bash2
+  if line1 =~ '^:$'
+    call dist#ft#SetFileTypeSH(line1)
+
+  # Z shell scripts
+  elseif line1 =~ '^#compdef\>'
+      || line1 =~ '^#autoload\>'
+      || "\n" .. line1 .. "\n" .. line2 .. "\n" .. line3 ..
+	 "\n" .. line4 .. "\n" .. line5
+	 =~ '\n\s*emulate\s\+\%(-[LR]\s\+\)\=[ckz]\=sh\>'
+    set ft=zsh
+
+  # ELM Mail files
+  elseif line1 =~ '^From \([a-zA-Z][a-zA-Z_0-9\.=-]*\(@[^ ]*\)\=\|-\) .* \(19\|20\)\d\d$'
+    set ft=mail
+
+  # Mason
+  elseif line1 =~ '^<[%&].*>'
+    set ft=mason
+
+  # Vim scripts (must have '" vim' as the first line to trigger this)
+  elseif line1 =~ '^" *[vV]im$'
+    set ft=vim
+
+  # libcxx and libstdc++ standard library headers like "iostream" do not have
+  # an extension, recognize the Emacs file mode.
+  elseif line1 =~? '-\*-.*C++.*-\*-'
+    set ft=cpp
+
+  # MOO
+  elseif line1 =~ '^\*\* LambdaMOO Database, Format Version \%([1-3]\>\)\@!\d\+ \*\*$'
+    set ft=moo
+
+    # Diff file:
+    # - "diff" in first line (context diff)
+    # - "Only in " in first line
+    # - "--- " in first line and "+++ " in second line (unified diff).
+    # - "*** " in first line and "--- " in second line (context diff).
+    # - "# It was generated by makepatch " in the second line (makepatch diff).
+    # - "Index: <filename>" in the first line (CVS file)
+    # - "=== ", line of "=", "---", "+++ " (SVK diff)
+    # - "=== ", "--- ", "+++ " (bzr diff, common case)
+    # - "=== (removed|added|renamed|modified)" (bzr diff, alternative)
+    # - "# HG changeset patch" in first line (Mercurial export format)
+  elseif line1 =~ '^\(diff\>\|Only in \|\d\+\(,\d\+\)\=[cda]\d\+\>\|# It was generated by makepatch \|Index:\s\+\f\+\r\=$\|===== \f\+ \d\+\.\d\+ vs edited\|==== //\f\+#\d\+\|# HG changeset patch\)'
+	 || (line1 =~ '^--- ' && line2 =~ '^+++ ')
+	 || (line1 =~ '^\* looking for ' && line2 =~ '^\* comparing to ')
+	 || (line1 =~ '^\*\*\* ' && line2 =~ '^--- ')
+	 || (line1 =~ '^=== ' && ((line2 =~ '^=\{66\}' && line3 =~ '^--- ' && line4 =~ '^+++') || (line2 =~ '^--- ' && line3 =~ '^+++ ')))
+	 || (line1 =~ '^=== \(removed\|added\|renamed\|modified\)')
+    set ft=diff
+
+    # PostScript Files (must have %!PS as the first line, like a2ps output)
+  elseif line1 =~ '^%![ \t]*PS'
+    set ft=postscr
+
+    # M4 scripts: Guess there is a line that starts with "dnl".
+  elseif line1 =~ '^\s*dnl\>'
+	 || line2 =~ '^\s*dnl\>'
+	 || line3 =~ '^\s*dnl\>'
+	 || line4 =~ '^\s*dnl\>'
+	 || line5 =~ '^\s*dnl\>'
+    set ft=m4
+
+    # AmigaDos scripts
+  elseif $TERM == "amiga" && (line1 =~ "^;" || line1 =~? '^\.bra')
+    set ft=amiga
+
+    # SiCAD scripts (must have procn or procd as the first line to trigger this)
+  elseif line1 =~? '^ *proc[nd] *$'
+    set ft=sicad
+
+    # Purify log files start with "****  Purify"
+  elseif line1 =~ '^\*\*\*\*  Purify'
+    set ft=purifylog
+
+    # XML
+  elseif line1 =~ '<?\s*xml.*?>'
+    set ft=xml
+
+    # XHTML (e.g.: PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN")
+  elseif line1 =~ '\<DTD\s\+XHTML\s'
+    set ft=xhtml
+
+    # HTML (e.g.: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN")
+    # Avoid "doctype html", used by slim.
+  elseif line1 =~? '<!DOCTYPE\s\+html\>'
+    set ft=html
+
+    # PDF
+  elseif line1 =~ '^%PDF-'
+    set ft=pdf
+
+    # XXD output
+  elseif line1 =~ '^\x\{7}: \x\{2} \=\x\{2} \=\x\{2} \=\x\{2} '
+    set ft=xxd
+
+    # RCS/CVS log output
+  elseif line1 =~ '^RCS file:' || line2 =~ '^RCS file:'
+    set ft=rcslog
+
+    # CVS commit
+  elseif line2 =~ '^CVS:' || getline("$") =~ '^CVS: '
+    set ft=cvs
+
+    # Prescribe
+  elseif line1 =~ '^!R!'
+    set ft=prescribe
+
+    # Send-pr
+  elseif line1 =~ '^SEND-PR:'
+    set ft=sendpr
+
+    # SNNS files
+  elseif line1 =~ '^SNNS network definition file'
+    set ft=snnsnet
+  elseif line1 =~ '^SNNS pattern definition file'
+    set ft=snnspat
+  elseif line1 =~ '^SNNS result file'
+    set ft=snnsres
+
+    # Virata
+  elseif line1 =~ '^%.\{-}[Vv]irata'
+	 || line2 =~ '^%.\{-}[Vv]irata'
+	 || line3 =~ '^%.\{-}[Vv]irata'
+	 || line4 =~ '^%.\{-}[Vv]irata'
+	 || line5 =~ '^%.\{-}[Vv]irata'
+    set ft=virata
+
+    # Strace
+  elseif line1 =~ '[0-9:.]* *execve(' || line1 =~ '^__libc_start_main'
+    set ft=strace
+
+    # VSE JCL
+  elseif line1 =~ '^\* $$ JOB\>' || line1 =~ '^// *JOB\>'
+    set ft=vsejcl
+
+    # TAK and SINDA
+  elseif line4 =~ 'K & K  Associates' || line2 =~ 'TAK 2000'
+    set ft=takout
+  elseif line3 =~ 'S Y S T E M S   I M P R O V E D '
+    set ft=sindaout
+  elseif getline(6) =~ 'Run Date: '
+    set ft=takcmp
+  elseif getline(9) =~ 'Node    File  1'
+    set ft=sindacmp
+
+    # DNS zone files
+  elseif line1 .. line2 .. line3 .. line4 =~ '^; <<>> DiG [0-9.]\+.* <<>>\|$ORIGIN\|$TTL\|IN\s\+SOA'
+    set ft=bindzone
+
+    # BAAN
+  elseif line1 =~ '|\*\{1,80}' && line2 =~ 'VRC '
+	 || line2 =~ '|\*\{1,80}' && line3 =~ 'VRC '
+    set ft=baan
+
+    # Valgrind
+  elseif line1 =~ '^==\d\+== valgrind' || line3 =~ '^==\d\+== Using valgrind'
+    set ft=valgrind
+
+    # Go docs
+  elseif line1 =~ '^PACKAGE DOCUMENTATION$'
+    set ft=godoc
+
+    # Renderman Interface Bytestream
+  elseif line1 =~ '^##RenderMan'
+    set ft=rib
+
+    # Scheme scripts
+  elseif line1 =~ 'exec\s\+\S*scheme' || line2 =~ 'exec\s\+\S*scheme'
+    set ft=scheme
+
+    # Git output
+  elseif line1 =~ '^\(commit\|tree\|object\) \x\{40,\}\>\|^tag \S\+$'
+    set ft=git
+
+    # Gprof (gnu profiler)
+  elseif line1 == 'Flat profile:'
+	&& line2 == ''
+	&& line3 =~ '^Each sample counts as .* seconds.$'
+    set ft=gprof
+
+    # Erlang terms
+    # (See also: http://www.gnu.org/software/emacs/manual/html_node/emacs/Choosing-Modes.html#Choosing-Modes)
+  elseif line1 =~? '-\*-.*erlang.*-\*-'
+    set ft=erlang
+
+    # YAML
+  elseif line1 =~ '^%YAML'
+    set ft=yaml
+
+    # MikroTik RouterOS script
+  elseif line1 =~ '^#.*by RouterOS.*$'
+    set ft=routeros
+
+    # Sed scripts
+    # #ncomment is allowed but most likely a false positive so require a space
+    # before any trailing comment text
+  elseif line1 =~ '^#n\%($\|\s\)'
+    set ft=sed
+
+  else
+    var lnum = 1
+    while getline(lnum) =~ "^? " && lnum < line("$")
+      lnum += 1
+    endwhile
+    if getline(lnum) =~ '^Index:\s\+\f\+$'
+      # CVS diff
+      set ft=diff
+
+      # locale input files: Formal Definitions of Cultural Conventions
+      # filename must be like en_US, fr_FR@euro or en_US.UTF-8
+    elseif expand("%") =~ '\a\a_\a\a\($\|[.@]\)\|i18n$\|POSIX$\|translit_'
+      lnum = 1
+      while lnum < 100 && lnum < line("$")
+	if getline(lnum) =~ '^LC_\(IDENTIFICATION\|CTYPE\|COLLATE\|MONETARY\|NUMERIC\|TIME\|MESSAGES\|PAPER\|TELEPHONE\|MEASUREMENT\|NAME\|ADDRESS\)$'
+	  setf fdcc
+	  break
+	endif
+	lnum += 1
+      endwhile
+    endif
+  endif
+enddef

runtime/autoload/freebasic.vim

@@ -0,0 +1,41 @@
+" Vim filetype plugin file
+" Language:	FreeBASIC
+" Maintainer:	Doug Kearns <dougkearns@gmail.com>
+" Last Change:	2021 Mar 16
+
+" Dialects can be one of fb, qb, fblite, or deprecated
+" Precedence is forcelang > #lang > lang
+function! freebasic#GetDialect() abort
+  if exists("g:freebasic_forcelang")
+    return g:freebasic_forcelang
+  endif
+
+  if exists("g:freebasic_lang")
+    let dialect = g:freebasic_lang
+  else
+    let dialect = "fb"
+  endif
+
+  " override with #lang directive or metacommand
+
+  let skip = "has('syntax_items') && synIDattr(synID(line('.'), col('.'), 1), 'name') =~ 'Comment$'"
+  let pat = '\c^\s*\%(#\s*lang\s\+\|''\s*$lang\s*:\s*\)"\([^"]*\)"'
+
+  let save_cursor = getcurpos()
+  call cursor(1, 1)
+  let lnum = search(pat, 'n', '', '', skip)
+  call setpos('.', save_cursor)
+
+  if lnum
+    let word = matchlist(getline(lnum), pat)[1]
+    if word =~? '\%(fb\|deprecated\|fblite\|qb\)'
+      let dialect = word
+    else
+      echomsg "freebasic#GetDialect: Invalid lang, found '" .. word .. "' at line " .. lnum .. " " .. getline(lnum)
+    endif
+  endif
+
+  return dialect
+endfunction
+
+" vim: nowrap sw=2 sts=2 ts=8 noet fdm=marker:

runtime/autoload/getscript.vim

@@ -129,7 +129,7 @@ fun! getscript#GetLatestVimScripts()
 " insure that wget is executable
   if executable(g:GetLatestVimScripts_wget) != 1
    echoerr "GetLatestVimScripts needs ".g:GetLatestVimScripts_wget." which apparently is not available on your system"
-"   call Dret("GetLatestVimScripts : wget not executable/availble")
+"   call Dret("GetLatestVimScripts : wget not executable/available")
    return
   endif
 
@@ -347,7 +347,7 @@ fun! s:GetOneScript(...)
   set t_ti= t_te= nors
 
  " put current line on top-of-screen and interpret it into
- " a      script identifer  : used to obtain webpage
+ " a      script identifier  : used to obtain webpage
  "        source identifier : used to identify current version
  " and an associated comment: used to report on what's being considered
   if a:0 >= 3

runtime/autoload/haskellcomplete.vim

@@ -54,7 +54,7 @@ function! haskellcomplete#Complete(findstart, base)
 
     if b:completingLangExtension
         if a:base ==? ""
-            " Return all posible Lang extensions
+            " Return all possible Lang extensions
             return s:langExtensions
         else
             let l:matches = []
@@ -70,7 +70,7 @@ function! haskellcomplete#Complete(findstart, base)
 
     elseif b:completingOptionsGHC
         if a:base ==? ""
-            " Return all posible GHC options
+            " Return all possible GHC options
             return s:optionsGHC
         else
             let l:matches = []
@@ -86,7 +86,7 @@ function! haskellcomplete#Complete(findstart, base)
 
     elseif b:completingModule
         if a:base ==? ""
-            " Return all posible modules
+            " Return all possible modules
             return s:commonModules
         else
             let l:matches = []

runtime/autoload/htmlcomplete.vim

@@ -486,7 +486,7 @@ function! htmlcomplete#CompleteTags(findstart, base)
 			endif
 		endif
 		" Value of attribute completion {{{
-		" If attr contains =\s*[\"'] we catched value of attribute
+		" If attr contains =\s*[\"'] we match value of attribute
 		if attr =~ "=\s*[\"']" || attr =~ "=\s*$"
 			" Let do attribute specific completion
 			let attrname = matchstr(attr, '.*\ze\s*=')

runtime/autoload/netrw.vim

@@ -1,7 +1,7 @@
 " netrw.vim: Handles file transfer and remote directory listing across
 "            AUTOLOAD SECTION
-" Date:		Sep 18, 2020
-" Version:	170
+" Date:		Aug 16, 2021
+" Version:	171
 " Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
 " GetLatestVimScripts: 1075 1 :AutoInstall: netrw.vim
 " Copyright:    Copyright (C) 2016 Charles E. Campbell {{{1
@@ -43,7 +43,7 @@ if exists("s:needspatches")
  endfor
 endif
 
-let g:loaded_netrw = "v170"
+let g:loaded_netrw = "v171"
 if !exists("s:NOTE")
  let s:NOTE    = 0
  let s:WARNING = 1
@@ -93,7 +93,7 @@ fun! netrw#ErrorMsg(level,msg,errnum)
    else
     let msg= level.a:msg
    endif
-   let s:popuperr_id  = popup_beval(msg,{})
+   let s:popuperr_id  = popup_atcursor(msg,{})
    let s:popuperr_text= ""
  elseif g:netrw_use_errorwindow
    " (default) netrw creates a one-line window to show error/warning
@@ -322,6 +322,7 @@ call s:NetrwInit("g:netrw_banner"      , 1)
 call s:NetrwInit("g:netrw_browse_split", 0)
 call s:NetrwInit("g:netrw_bufsettings" , "noma nomod nonu nobl nowrap ro nornu")
 call s:NetrwInit("g:netrw_chgwin"      , -1)
+call s:NetrwInit("g:netrw_clipboard"   , 1)
 call s:NetrwInit("g:netrw_compress"    , "gzip")
 call s:NetrwInit("g:netrw_ctags"       , "ctags")
 if exists("g:netrw_cursorline") && !exists("g:netrw_cursor")
@@ -331,6 +332,7 @@ endif
 call s:NetrwInit("g:netrw_cursor"      , 2)
 let s:netrw_usercul = &cursorline
 let s:netrw_usercuc = &cursorcolumn
+"call Decho("(netrw) COMBAK: cuc=".&l:cuc." cul=".&l:cul." initialization of s:netrw_cu[cl]")
 call s:NetrwInit("g:netrw_cygdrive","/cygdrive")
 " Default values - d-g ---------- {{{3
 call s:NetrwInit("s:didstarstar",0)
@@ -703,7 +705,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
   endif
 
   " save registers
-  if has("clipboard")
+  if has("clipboard") && g:netrw_clipboard
 "   call Decho("(netrw#Explore) save @* and @+",'~'.expand("<slnum>"))
    sil! let keepregstar = @*
    sil! let keepregplus = @+
@@ -931,7 +933,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
 "     call Decho("..case Nexplore with starpat=".starpat.": (indx=".indx.")",'~'.expand("<slnum>"))
      if !exists("w:netrw_explore_list") " sanity check
       NetrwKeepj call netrw#ErrorMsg(s:WARNING,"using Nexplore or <s-down> improperly; see help for netrw-starstar",40)
-      if has("clipboard")
+      if has("clipboard") && g:netrw_clipboard
 "       call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
        if @* != keepregstar | sil! let @* = keepregstar | endif
        if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -957,7 +959,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
 "     call Decho("case Pexplore with starpat=".starpat.": (indx=".indx.")",'~'.expand("<slnum>"))
      if !exists("w:netrw_explore_list") " sanity check
       NetrwKeepj call netrw#ErrorMsg(s:WARNING,"using Pexplore or <s-up> improperly; see help for netrw-starstar",41)
-      if has("clipboard")
+      if has("clipboard") && g:netrw_clipboard
 "       call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
        if @* != keepregstar | sil! let @* = keepregstar | endif
        if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1013,7 +1015,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
       catch /^Vim\%((\a\+)\)\=:E480/
        keepalt call netrw#ErrorMsg(s:WARNING,'no files matched pattern<'.pattern.'>',45)
        if &hls | let keepregslash= s:ExplorePatHls(pattern) | endif
-       if has("clipboard")
+       if has("clipboard") && g:netrw_clipboard
 "        call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
         if @* != keepregstar | sil! let @* = keepregstar | endif
         if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1050,7 +1052,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
 
      if w:netrw_explore_listlen == 0 || (w:netrw_explore_listlen == 1 && w:netrw_explore_list[0] =~ '\*\*\/')
       keepalt NetrwKeepj call netrw#ErrorMsg(s:WARNING,"no files matched",42)
-      if has("clipboard")
+      if has("clipboard") && g:netrw_clipboard
 "       call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
         if @* != keepregstar | sil! let @* = keepregstar | endif
         if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1099,7 +1101,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
     if !exists("g:netrw_quiet")
      keepalt NetrwKeepj call netrw#ErrorMsg(s:WARNING,"your vim needs the +path_extra feature for Exploring with **!",44)
     endif
-    if has("clipboard")
+    if has("clipboard") && g:netrw_clipboard
 "     call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
       if @* != keepregstar | sil! let @* = keepregstar | endif
       if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1173,7 +1175,7 @@ fun! netrw#Explore(indx,dosplit,style,...)
   " there's no danger of a late FocusGained event on initialization.
   " Consequently, set s:netrw_events to 2.
   let s:netrw_events= 2
-  if has("clipboard")
+  if has("clipboard") && g:netrw_clipboard
 "   call Decho("(netrw#Explore) restore @* and @+",'~'.expand("<slnum>"))
    if @* != keepregstar | sil! let @* = keepregstar | endif
    if @+ != keepregplus | sil! let @+ = keepregplus | endif
@@ -1641,7 +1643,8 @@ endfun
 fun! s:NetrwOptionsSave(vt)
 "  call Dfunc("s:NetrwOptionsSave(vt<".a:vt.">) win#".winnr()." buf#".bufnr("%")."<".bufname(bufnr("%")).">"." winnr($)=".winnr("$")." mod=".&mod." ma=".&ma)
 "  call Decho(a:vt."netrw_optionsave".(exists("{a:vt}netrw_optionsave")? ("=".{a:vt}netrw_optionsave) : " doesn't exist"),'~'.expand("<slnum>"))
-"  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
+"  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt." hid=".&hid,'~'.expand("<slnum>"))
+"  call Decho("(s:NetrwOptionsSave) lines=".&lines)
 
   if !exists("{a:vt}netrw_optionsave")
    let {a:vt}netrw_optionsave= 1
@@ -1667,6 +1670,9 @@ fun! s:NetrwOptionsSave(vt)
   let {a:vt}netrw_cinokeep  = &l:cino
   let {a:vt}netrw_comkeep   = &l:com
   let {a:vt}netrw_cpokeep   = &l:cpo
+  let {a:vt}netrw_cuckeep   = &l:cuc
+  let {a:vt}netrw_culkeep   = &l:cul
+"  call Decho("(s:NetrwOptionsSave) COMBAK: cuc=".&l:cuc." cul=".&l:cul)
   let {a:vt}netrw_diffkeep  = &l:diff
   let {a:vt}netrw_fenkeep   = &l:fen
   if !exists("g:netrw_ffkeep") || g:netrw_ffkeep
@@ -1674,9 +1680,11 @@ fun! s:NetrwOptionsSave(vt)
   endif
   let {a:vt}netrw_fokeep    = &l:fo           " formatoptions
   let {a:vt}netrw_gdkeep    = &l:gd           " gdefault
+  let {a:vt}netrw_gokeep    = &l:go           " guioptions
   let {a:vt}netrw_hidkeep   = &l:hidden
   let {a:vt}netrw_imkeep    = &l:im
   let {a:vt}netrw_iskkeep   = &l:isk
+  let {a:vt}netrw_lines     = &lines
   let {a:vt}netrw_lskeep    = &l:ls
   let {a:vt}netrw_makeep    = &l:ma
   let {a:vt}netrw_magickeep = &l:magic
@@ -1702,12 +1710,13 @@ fun! s:NetrwOptionsSave(vt)
    let {a:vt}netrw_dirkeep  = getcwd()
 "   call Decho("saving to ".a:vt."netrw_dirkeep<".{a:vt}netrw_dirkeep.">",'~'.expand("<slnum>"))
   endif
-  if has("clipboard")
+  if has("clipboard") && g:netrw_clipboard
    sil! let {a:vt}netrw_starkeep = @*
    sil! let {a:vt}netrw_pluskeep = @+
   endif
   sil! let {a:vt}netrw_slashkeep= @/
 
+"  call Decho("(s:NetrwOptionsSave) lines=".&lines)
 "  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
 "  call Dret("s:NetrwOptionsSave : tab#".tabpagenr()." win#".winnr())
 endfun
@@ -1732,12 +1741,18 @@ fun! s:NetrwOptionsSafe(islocal)
   endif
   call s:NetrwSetSafeSetting("&l:ci",0)
   call s:NetrwSetSafeSetting("&l:cin",0)
-  call s:NetrwSetSafeSetting("&l:bh","hide")
+  if g:netrw_fastbrowse > a:islocal
+   call s:NetrwSetSafeSetting("&l:bh","hide")
+  else
+   call s:NetrwSetSafeSetting("&l:bh","delete")
+  endif
   call s:NetrwSetSafeSetting("&l:cino","")
   call s:NetrwSetSafeSetting("&l:com","")
   if &cpo =~ 'a' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'a','','g')) | endif
   if &cpo =~ 'A' | call s:NetrwSetSafeSetting("&cpo",substitute(&cpo,'A','','g')) | endif
   setl fo=nroql2
+  " call s:NetrwSetSafeSetting("&go","begmr")
+  if &go =~ '\ca' | call s:NetrwSetSafeSetting("&go",substitute(&go,'\ca','','g')) | endif
   call s:NetrwSetSafeSetting("&l:hid",0)
   call s:NetrwSetSafeSetting("&l:im",0)
   setl isk+=@ isk+=* isk+=/
@@ -1751,7 +1766,10 @@ fun! s:NetrwOptionsSafe(islocal)
   call s:NetrwSetSafeSetting("&l:tw",0)
   call s:NetrwSetSafeSetting("&l:wig","")
   setl cedit&
-  call s:NetrwCursor()
+
+  " set up cuc and cul based on g:netrw_cursor and listing style
+  " COMBAK -- cuc cul related
+  call s:NetrwCursor(0)
 
   " allow the user to override safe options
 "  call Decho("ft<".&ft."> ei=".&ei,'~'.expand("<slnum>"))
@@ -1769,11 +1787,14 @@ endfun
 " s:NetrwOptionsRestore: restore options (based on prior s:NetrwOptionsSave) {{{2
 fun! s:NetrwOptionsRestore(vt)
 "  call Dfunc("s:NetrwOptionsRestore(vt<".a:vt.">) win#".winnr()." buf#".bufnr("%")."<".bufname("%")."> winnr($)=".winnr("$"))
+"  call Decho("(s:NetrwOptionsRestore) lines=".&lines)
 "  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
   if !exists("{a:vt}netrw_optionsave")
 "   call Decho("case ".a:vt."netrw_optionsave : doesn't exist",'~'.expand("<slnum>"))
-"   call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
-"   call Decho("ro=".&l:ro." ma=".&l:ma." mod=".&l:mod." wrap=".&l:wrap." (filename<".expand("%")."> win#".winnr()." ft<".&ft.">)",'~'.expand("<slnum>"))
+"   call Decho("..doing filetype detect anyway")
+   filetype detect
+"   call Decho("..settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
+"   call Decho("..ro=".&l:ro." ma=".&l:ma." mod=".&l:mod." wrap=".&l:wrap." (filename<".expand("%")."> win#".winnr()." ft<".&ft.">)",'~'.expand("<slnum>"))
 "   call Dret("s:NetrwOptionsRestore : ".a:vt."netrw_optionsave doesn't exist")
    return
   endif
@@ -1790,41 +1811,53 @@ fun! s:NetrwOptionsRestore(vt)
     endif
    endif
   endif
+"  call Decho("(s:NetrwOptionsRestore) #1 lines=".&lines)
   call s:NetrwRestoreSetting(a:vt."netrw_aikeep","&l:ai")
   call s:NetrwRestoreSetting(a:vt."netrw_awkeep","&l:aw")
   call s:NetrwRestoreSetting(a:vt."netrw_blkeep","&l:bl")
   call s:NetrwRestoreSetting(a:vt."netrw_btkeep","&l:bt")
   call s:NetrwRestoreSetting(a:vt."netrw_bombkeep","&l:bomb")
+"  call Decho("(s:NetrwOptionsRestore) #2 lines=".&lines)
   call s:NetrwRestoreSetting(a:vt."netrw_cedit","&cedit")
   call s:NetrwRestoreSetting(a:vt."netrw_cikeep","&l:ci")
   call s:NetrwRestoreSetting(a:vt."netrw_cinkeep","&l:cin")
   call s:NetrwRestoreSetting(a:vt."netrw_cinokeep","&l:cino")
   call s:NetrwRestoreSetting(a:vt."netrw_comkeep","&l:com")
+"  call Decho("(s:NetrwOptionsRestore) #3 lines=".&lines)
   call s:NetrwRestoreSetting(a:vt."netrw_cpokeep","&l:cpo")
   call s:NetrwRestoreSetting(a:vt."netrw_diffkeep","&l:diff")
   call s:NetrwRestoreSetting(a:vt."netrw_fenkeep","&l:fen")
   if exists("g:netrw_ffkeep") && g:netrw_ffkeep
    call s:NetrwRestoreSetting(a:vt."netrw_ffkeep")","&l:ff")
   endif
-  call s:NetrwRestoreSetting(a:vt."netrw_fokeep","&l:fo")
-  call s:NetrwRestoreSetting(a:vt."netrw_gdkeep","&l:gd")
-  call s:NetrwRestoreSetting(a:vt."netrw_hidkeep","&l:hidden")
-  call s:NetrwRestoreSetting(a:vt."netrw_imkeep","&l:im")
-  call s:NetrwRestoreSetting(a:vt."netrw_iskkeep","&l:isk")
-  call s:NetrwRestoreSetting(a:vt."netrw_lskeep","&l:ls")
-  call s:NetrwRestoreSetting(a:vt."netrw_makeep","&l:ma")
+"  call Decho("(s:NetrwOptionsRestore) #4 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_fokeep"   ,"&l:fo")
+  call s:NetrwRestoreSetting(a:vt."netrw_gdkeep"   ,"&l:gd")
+  call s:NetrwRestoreSetting(a:vt."netrw_gokeep"   ,"&l:go")
+  call s:NetrwRestoreSetting(a:vt."netrw_hidkeep"  ,"&l:hidden")
+"  call Decho("(s:NetrwOptionsRestore) #5 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_imkeep"   ,"&l:im")
+  call s:NetrwRestoreSetting(a:vt."netrw_iskkeep"  ,"&l:isk")
+"  call Decho("(s:NetrwOptionsRestore) #6 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_lines"    ,"&lines")
+"  call Decho("(s:NetrwOptionsRestore) #7 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_lskeep"   ,"&l:ls")
+  call s:NetrwRestoreSetting(a:vt."netrw_makeep"   ,"&l:ma")
   call s:NetrwRestoreSetting(a:vt."netrw_magickeep","&l:magic")
-  call s:NetrwRestoreSetting(a:vt."netrw_modkeep","&l:mod")
-  call s:NetrwRestoreSetting(a:vt."netrw_nukeep","&l:nu")
-  call s:NetrwRestoreSetting(a:vt."netrw_rnukeep","&l:rnu")
-  call s:NetrwRestoreSetting(a:vt."netrw_repkeep","&l:report")
-  call s:NetrwRestoreSetting(a:vt."netrw_rokeep","&l:ro")
-  call s:NetrwRestoreSetting(a:vt."netrw_selkeep","&l:sel")
+  call s:NetrwRestoreSetting(a:vt."netrw_modkeep"  ,"&l:mod")
+  call s:NetrwRestoreSetting(a:vt."netrw_nukeep"   ,"&l:nu")
+"  call Decho("(s:NetrwOptionsRestore) #8 lines=".&lines)
+  call s:NetrwRestoreSetting(a:vt."netrw_rnukeep"  ,"&l:rnu")
+  call s:NetrwRestoreSetting(a:vt."netrw_repkeep"  ,"&l:report")
+  call s:NetrwRestoreSetting(a:vt."netrw_rokeep"   ,"&l:ro")
+  call s:NetrwRestoreSetting(a:vt."netrw_selkeep"  ,"&l:sel")
+"  call Decho("(s:NetrwOptionsRestore) #9 lines=".&lines)
   call s:NetrwRestoreSetting(a:vt."netrw_spellkeep","&l:spell")
-  call s:NetrwRestoreSetting(a:vt."netrw_twkeep","&l:tw")
-  call s:NetrwRestoreSetting(a:vt."netrw_wigkeep","&l:wig")
-  call s:NetrwRestoreSetting(a:vt."netrw_wrapkeep","&l:wrap")
+  call s:NetrwRestoreSetting(a:vt."netrw_twkeep"   ,"&l:tw")
+  call s:NetrwRestoreSetting(a:vt."netrw_wigkeep"  ,"&l:wig")
+  call s:NetrwRestoreSetting(a:vt."netrw_wrapkeep" ,"&l:wrap")
   call s:NetrwRestoreSetting(a:vt."netrw_writekeep","&l:write")
+"  call Decho("(s:NetrwOptionsRestore) #10 lines=".&lines)
   call s:NetrwRestoreSetting("s:yykeep","@@")
   " former problem: start with liststyle=0; press <i> : result, following line resets l:ts.
   " Fixed; in s:PerformListing, when w:netrw_liststyle is s:LONGLIST, will use a printf to pad filename with spaces
@@ -1855,7 +1888,7 @@ fun! s:NetrwOptionsRestore(vt)
     unlet {a:vt}netrw_dirkeep
    endif
   endif
-  if has("clipboard")
+  if has("clipboard") && g:netrw_clipboard
 "   call Decho("has clipboard",'~'.expand("<slnum>"))
    call s:NetrwRestoreSetting(a:vt."netrw_starkeep","@*")
    call s:NetrwRestoreSetting(a:vt."netrw_pluskeep","@+")
@@ -1871,9 +1904,11 @@ fun! s:NetrwOptionsRestore(vt)
   " were having their filetype detect-generated settings overwritten by
   " NetrwOptionRestore.
   if &ft != "netrw"
-"   call Decho("filetype detect  (ft=".&ft.")",'~'.expand("<slnum>"))
+"   call Decho("before: filetype detect  (ft=".&ft.")",'~'.expand("<slnum>"))
    filetype detect
+"   call Decho("after : filetype detect  (ft=".&ft.")",'~'.expand("<slnum>"))
   endif
+"  call Decho("(s:NetrwOptionsRestore) lines=".&lines)
 "  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." a:vt=".a:vt,'~'.expand("<slnum>"))
 "  call Dret("s:NetrwOptionsRestore : tab#".tabpagenr()." win#".winnr()." buf#".bufnr("%")."<".bufname("%")."> modified=".&modified." modifiable=".&modifiable." readonly=".&readonly)
 endfun
@@ -1923,7 +1958,7 @@ fun! s:NetrwRestoreSetting(keepvar,setting)
   " typically called from s:NetrwOptionsRestore
   "   call s:NetrwRestoreSettings(keep-option-variable-name,'associated-option')
   "   ex. call s:NetrwRestoreSetting(a:vt."netrw_selkeep","&l:sel")
-  "  Restores option (if different) from a keepvar
+  "  Restores option (but only if different) from a:keepvar
   if exists(a:keepvar)
    exe "let keepvarval= ".a:keepvar
    exe "let setting= ".a:setting
@@ -2845,14 +2880,16 @@ fun! netrw#SetTreetop(iscmd,...)
 "  call Decho("inittreetop<".(exists("inittreetop")? inittreetop : "n/a").">")
 
   if (a:iscmd == 0 || a:1 == "") && exists("inittreetop")
-   let treedir= s:NetrwTreePath(inittreetop)
+   let treedir         = s:NetrwTreePath(inittreetop)
 "   call Decho("treedir<".treedir.">",'~'.expand("<slnum>"))
   else
    if isdirectory(s:NetrwFile(a:1))
 "    call Decho("a:1<".a:1."> is a directory",'~'.expand("<slnum>"))
-    let treedir= a:1
+    let treedir         = a:1
+    let s:netrw_treetop = treedir
    elseif exists("b:netrw_curdir") && (isdirectory(s:NetrwFile(b:netrw_curdir."/".a:1)) || a:1 =~ '^\a\{3,}://')
-    let treedir= b:netrw_curdir."/".a:1
+    let treedir         = b:netrw_curdir."/".a:1
+    let s:netrw_treetop = treedir
 "    call Decho("a:1<".a:1."> is NOT a directory, using treedir<".treedir.">",'~'.expand("<slnum>"))
    else
     " normally the cursor is left in the message window.
@@ -2860,7 +2897,8 @@ fun! netrw#SetTreetop(iscmd,...)
     let netrwbuf= bufnr("%")
     call netrw#ErrorMsg(s:ERROR,"sorry, ".a:1." doesn't seem to be a directory!",95)
     exe bufwinnr(netrwbuf)."wincmd w"
-    let treedir= "."
+    let treedir         = "."
+    let s:netrw_treetop = getcwd()
    endif
   endif
 "  call Decho("treedir<".treedir.">",'~'.expand("<slnum>"))
@@ -4115,6 +4153,7 @@ fun! s:NetrwFileInfo(islocal,fname)
    elseif g:netrw_sizestyle =~# 'h'
     let lsopt= "-lsadh --si"
    endif
+"   call Decho("(s:NetrwFileInfo) lsopt<".lsopt.">")
    if (has("unix") || has("macunix")) && executable("/bin/ls")
 
     if getline(".") == "../"
@@ -4176,9 +4215,10 @@ endfun
 " s:NetrwGetBuffer: [get a new|find an old netrw] buffer for a netrw listing {{{2
 "   returns 0=cleared buffer
 "           1=re-used buffer (buffer not cleared)
+"  Nov 09, 2020: tst952 shows that when user does :set hidden that NetrwGetBuffer will come up with a [No Name] buffer (hid fix)
 fun! s:NetrwGetBuffer(islocal,dirname)
 "  call Dfunc("s:NetrwGetBuffer(islocal=".a:islocal." dirname<".a:dirname.">) liststyle=".g:netrw_liststyle)
-"  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo,'~'.expand("<slnum>"))
+"  call Decho("settings buf#".bufnr("%")."<".bufname("%").">: ".((&l:ma == 0)? "no" : "")."ma ".((&l:mod == 0)? "no" : "")."mod ".((&l:bl == 0)? "no" : "")."bl ".((&l:ro == 0)? "no" : "")."ro fo=".&l:fo." hid=".&hid,'~'.expand("<slnum>"))
 "  call Decho("netrwbuf dictionary=".(exists("s:netrwbuf")? string(s:netrwbuf) : 'n/a'),'~'.expand("<slnum>"))
 "  call Dredir("ls!","s:NetrwGetBuffer")
   let dirname= a:dirname
@@ -4228,17 +4268,26 @@ fun! s:NetrwGetBuffer(islocal,dirname)
   endif
 "  call Decho("  bufnum#".bufnum,'~'.expand("<slnum>"))
 
-  " highjack the current buffer if
-  "   it has the desired name
-  "   it is empty
-"  call Decho("deciding if I can highjack the current buffer#".bufnr("%"),'~'.expand("<slnum>"))
-"  call Decho("..dirname<".dirname.">",'~'.expand("<slnum>"))
-"  call Decho("..bufname<".bufname("%").">",'~'.expand("<slnum>"))
-"  call Decho("..getline($)<".getline("$").">",'~'.expand("<slnum>"))
-  if dirname == bufname("%") && line("$") == 1 && getline("%") == ""
+  " hijack the current buffer
+  "   IF the buffer already has the desired name
+  "   AND it is empty
+  let curbuf = bufname("%")
+  if curbuf == '.'
+   let curbuf = getcwd()
+  endif
+"  call Dredir("ls!","NetrwGetFile (renamed buffer back to remote filename<".rfile."> : expand(%)<".expand("%").">)")
+"  call Decho("deciding if netrw may hijack the current buffer#".bufnr("%")."<".curbuf.">",'~'.expand("<slnum>"))
+"  call Decho("..dirname<".dirname.">  IF dirname == bufname",'~'.expand("<slnum>"))
+"  call Decho("..curbuf<".curbuf.">",'~'.expand("<slnum>"))
+"  call Decho("..line($)=".line("$")." AND this is 1",'~'.expand("<slnum>"))
+"  call Decho("..getline(%)<".getline("%").">  AND this line is empty",'~'.expand("<slnum>"))
+  if dirname == curbuf && line("$") == 1 && getline("%") == ""
 "   call Dret("s:NetrwGetBuffer 0<cleared buffer> : highjacking buffer#".bufnr("%"))
    return 0
+  else  " DEBUG
+"   call Decho("..did NOT hijack buffer",'~'.expand("<slnum>"))
   endif
+  " Aug 14, 2021: was thinking about looking for a [No Name] buffer here and using it, but that might cause problems
 
   " get enew buffer and name it -or- re-use buffer {{{3
   if bufnum < 0      " get enew buffer and name it
@@ -4563,7 +4612,7 @@ fun! s:NetrwListStyle(islocal)
   " refresh the listing
 "  call Decho("refresh the listing",'~'.expand("<slnum>"))
   NetrwKeepj call s:NetrwRefresh(a:islocal,s:NetrwBrowseChgDir(a:islocal,'./'))
-  NetrwKeepj call s:NetrwCursor()
+  NetrwKeepj call s:NetrwCursor(0)
 
   " repoint t:netrw_lexbufnr if appropriate
   if exists("repointlexbufnr")
@@ -4769,7 +4818,7 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
   endif
 "  call Decho("b:netrw_curdir<".b:netrw_curdir.">")
 
-  " NetrwBrowseChgDir: save options and initialize {{{3
+  " NetrwBrowseChgDir; save options and initialize {{{3
 "  call Decho("saving options",'~'.expand("<slnum>"))
   call s:SavePosn(s:netrw_posn)
   NetrwKeepj call s:NetrwOptionsSave("s:")
@@ -4837,6 +4886,8 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
    if exists("w:netrw_liststyle") && w:netrw_liststyle == s:TREELIST && exists("w:netrw_treedict") && newdir !~ '^\(/\|\a:\)'
 "    call Decho("edit-a-file: handle tree listing: w:netrw_treedict<".(exists("w:netrw_treedict")? string(w:netrw_treedict) : 'n/a').">",'~'.expand("<slnum>"))
 "    call Decho("edit-a-file: newdir<".newdir.">",'~'.expand("<slnum>"))
+"    let newdir = s:NetrwTreePath(s:netrw_treetop)
+"    call Decho("edit-a-file: COMBAK why doesn't this recognize file1's directory???")
     let dirname= s:NetrwTreeDir(a:islocal)
     "COMBAK : not working for a symlink -- but what about a regular file? a directory?
 "    call Decho("COMBAK : not working for a symlink -- but what about a regular file? a directory?")
@@ -4950,7 +5001,8 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
       exe "NetrwKeepj e ".fnameescape(dirname)
      endif
 "     call Decho("edit-a-file: after e! ".dirname.": hidden=".&hidden." bufhidden<".&bufhidden."> mod=".&mod,'~'.expand("<slnum>"))
-     call s:NetrwCursor()
+     " COMBAK -- cuc cul related
+     call s:NetrwCursor(1)
      if &hidden || &bufhidden == "hide"
       " file came from vim's hidden storage.  Don't "restore" options with it.
       let dorestore= 0
@@ -4971,8 +5023,8 @@ fun! s:NetrwBrowseChgDir(islocal,newdir,...)
      elseif type(g:Netrw_funcref) == 3
 "      call Decho("edit-a-file: handling a list of g:Netrw_funcrefs",'~'.expand("<slnum>"))
       for Fncref in g:Netrw_funcref
-       if type(FncRef) == 2
-        NetrwKeepj call FncRef()
+       if type(Fncref) == 2
+        NetrwKeepj call Fncref()
        endif
       endfor
      endif
@@ -5264,6 +5316,12 @@ fun! netrw#BrowseX(fname,remote)
   endif
 "  call Decho("not a local file nor a webpage request",'~'.expand("<slnum>"))
 
+  if exists("g:netrw_browsex_viewer") && exists("g:netrw_browsex_support_remote") && !g:netrw_browsex_support_remote
+    let remote = a:remote
+  else
+    let remote = 0
+  endif
+
   let ykeep      = @@
   let screenposn = winsaveview()
 "  call Decho("saving posn to screenposn<".string(screenposn).">",'~'.expand("<slnum>"))
@@ -5308,9 +5366,9 @@ fun! netrw#BrowseX(fname,remote)
   endif
 "  call Decho("exten<".exten.">",'~'.expand("<slnum>"))
 
-  if a:remote == 1
+  if remote == 1
    " create a local copy
-"   call Decho("remote: a:remote=".a:remote.": create a local copy of <".a:fname.">",'~'.expand("<slnum>"))
+"   call Decho("remote: remote=".remote.": create a local copy of <".a:fname.">",'~'.expand("<slnum>"))
    setl bh=delete
    call netrw#NetRead(3,a:fname)
    " attempt to rename tempfile
@@ -5332,7 +5390,7 @@ fun! netrw#BrowseX(fname,remote)
     let fname= s:netrw_tmpfile
    endif
   else
-"   call Decho("local: a:remote=".a:remote.": handling local copy of <".a:fname.">",'~'.expand("<slnum>"))
+"   call Decho("local: remote=".remote.": handling local copy of <".a:fname.">",'~'.expand("<slnum>"))
    let fname= a:fname
    " special ~ handler for local
    if fname =~ '^\~' && expand("$HOME") != ""
@@ -5426,8 +5484,8 @@ fun! netrw#BrowseX(fname,remote)
    if a:fname =~ '^https\=://'
     " atril does not appear to understand how to handle html -- so use gvim to edit the document
     let use_ctrlo= 0
-"    call Decho("(COMBAK) fname<".fname.">")
-"    call Decho("(COMBAK) a:fname<".a:fname.">")
+"    call Decho("fname<".fname.">")
+"    call Decho("a:fname<".a:fname.">")
     call s:NetrwExe("sil! !gvim ".fname.' -c "keepj keepalt file '.fnameescape(a:fname).'"')
 
    else
@@ -5475,12 +5533,12 @@ fun! netrw#BrowseX(fname,remote)
   "          return to prior buffer (directory listing)
   "          Feb 12, 2008: had to de-activiate removal of
   "          temporary file because it wasn't getting seen.
-"  if a:remote == 1 && fname != a:fname
+"  if remote == 1 && fname != a:fname
 ""   call Decho("deleting temporary file<".fname.">",'~'.expand("<slnum>"))
 "   call s:NetrwDelete(fname)
 "  endif
 
-  if a:remote == 1
+  if remote == 1
    setl bh=delete bt=nofile
    if g:netrw_use_noswf
     setl noswf
@@ -5539,7 +5597,7 @@ fun! s:NetrwBufRename(newname)
    let b:junk= 1
 "   call Decho("rename buffer: sil! keepj keepalt file ".fnameescape(a:newname),'~'.expand("<slnum>"))
    exe 'sil! keepj keepalt file '.fnameescape(a:newname)
-"   call Dredir("ls!","s:NetrwBufRename (before bwipe)")
+"   call Dredir("ls!","s:NetrwBufRename (before bwipe)~".expand("<slnum>"))
    let oldbufnr= bufnr(oldbufname)
 "   call Decho("oldbufname<".oldbufname."> oldbufnr#".oldbufnr,'~'.expand("<slnum>"))
 "   call Decho("bufnr(%)=".bufnr("%"),'~'.expand("<slnum>"))
@@ -5548,6 +5606,9 @@ fun! s:NetrwBufRename(newname)
     exe "bwipe! ".oldbufnr
 "   else " Decho
 "    call Decho("did *not* bwipe buf#".oldbufnr,'~'.expand("<slnum>"))
+"    call Decho("..reason: if oldbufname<".oldbufname."> is empty",'~'.expand("<slnum>"))"
+"    call Decho("..reason: if oldbufnr#".oldbufnr." is -1",'~'.expand("<slnum>"))"
+"    call Decho("..reason: if oldbufnr#".oldbufnr." != bufnr(%)#".bufnr("%"),'~'.expand("<slnum>"))"
    endif
 "   call Dredir("ls!","s:NetrwBufRename (after rename)")
 "  else " Decho
@@ -6536,7 +6597,7 @@ fun! s:NetrwMaps(islocal)
    if !hasmapto('<Plug>NetrwRefresh')
     nmap <buffer> <unique> <c-l> <Plug>NetrwRefresh
    endif
-   nnoremap <buffer> <silent> <Plug>NetrwRefresh		<c-l>:call <SID>NetrwRefresh(1,<SID>NetrwBrowseChgDir(1,(w:netrw_liststyle == 3)? w:netrw_treetop : './'))<cr>
+   nnoremap <buffer> <silent> <Plug>NetrwRefresh		<c-l>:call <SID>NetrwRefresh(1,<SID>NetrwBrowseChgDir(1,(exists("w:netrw_liststyle") && exists("w:netrw_treetop") && w:netrw_liststyle == 3)? w:netrw_treetop : './'))<cr>
    if s:didstarstar || !mapcheck("<s-down>","n")
     nnoremap <buffer> <silent> <s-down>	:Nexplore<cr>
    endif
@@ -6785,7 +6846,7 @@ fun! s:NetrwMarkFile(islocal,fname)
 
   " sanity check
   if empty(a:fname)
-"   call Dret("s:NetrwMarkFile : emtpy fname")
+"   call Dret("s:NetrwMarkFile : empty fname")
    return
   endif
   let curdir = s:NetrwGetCurdir(a:islocal)
@@ -8164,6 +8225,23 @@ fun! s:NetrwOpenFile(islocal)
   call inputsave()
   let fname= input("Enter filename: ")
   call inputrestore()
+"  call Decho("(s:NetrwOpenFile) fname<".fname.">",'~'.expand("<slnum>"))
+
+  " determine if Lexplore is in use
+  if exists("t:netrw_lexbufnr")
+   " check if t:netrw_lexbufnr refers to a netrw window
+"   call Decho("(s:netrwOpenFile) ..t:netrw_lexbufnr=".t:netrw_lexbufnr,'~'.expand("<slnum>"))
+   let lexwinnr = bufwinnr(t:netrw_lexbufnr)
+   if lexwinnr != -1 && exists("g:netrw_chgwin") && g:netrw_chgwin != -1
+"    call Decho("(s:netrwOpenFile) ..Lexplore in use",'~'.expand("<slnum>"))
+    exe "NetrwKeepj keepalt ".g:netrw_chgwin."wincmd w"
+    exe "NetrwKeepj e ".fnameescape(fname)
+    let @@= ykeep
+"    call Dret("s:NetrwOpenFile : creating a file with Lexplore mode")
+   endif
+  endif
+
+  " Does the filename contain a path?
   if fname !~ '[/\\]'
    if exists("b:netrw_curdir")
     if exists("g:netrw_quiet")
@@ -8502,6 +8580,7 @@ fun! s:NetrwPrevWinOpen(islocal)
   let lastwinnr = winnr("$")
   let curword   = s:NetrwGetWord()
   let choice    = 0
+  let s:prevwinopen= 1	" lets s:NetrwTreeDir() know that NetrwPrevWinOpen called it
   let s:treedir = s:NetrwTreeDir(a:islocal)
   let curdir    = s:treedir
 "  call Decho("winnr($)#".lastwinnr." curword<".curword.">",'~'.expand("<slnum>"))
@@ -8829,7 +8908,7 @@ fun! s:NetrwPreview(path) range
     "    0 :             1: top       -- preview window is horizontally split off and on the top
     "    0 :             0: bot       -- preview window is horizontally split off and on the bottom
     "
-    " Note that the file being previewed is already known to not be a directory, hence we can avoid doing a LocalBrowse() check via
+    " Note that the file being previewed is already known to not be a directory, hence we can avoid doing a LocalBrowseCheck() check via
     " the BufEnter event set up in netrwPlugin.vim
 "    call Decho("exe ".(g:netrw_alto? "top " : "bot ").(g:netrw_preview? "vert " : "")."pedit ".fnameescape(a:path),'~'.expand("<slnum>"))
     let eikeep = &ei
@@ -9264,14 +9343,20 @@ fun! s:NetrwTreeDir(islocal)
 "  call Decho("g:netrw_keepdir  =".(exists("g:netrw_keepdir")?   g:netrw_keepdir   : 'n/a'),'~'.expand("<slnum>"))
 "  call Decho("w:netrw_liststyle=".(exists("w:netrw_liststyle")? w:netrw_liststyle : 'n/a'),'~'.expand("<slnum>"))
 "  call Decho("w:netrw_treetop  =".(exists("w:netrw_treetop")?   w:netrw_treetop   : 'n/a'),'~'.expand("<slnum>"))
+"  call Decho("current line<".getline(".").">")
 
-  if exists("s:treedir")
+  if exists("s:treedir") && exists("s:prevwinopen")
    " s:NetrwPrevWinOpen opens a "previous" window -- and thus needs to and does call s:NetrwTreeDir early
+"   call Decho('s:NetrwPrevWinOpen opens a "previous" window -- and thus needs to and does call s:NetrwTreeDir early')
    let treedir= s:treedir
    unlet s:treedir
-"   call Dret("s:NetrwTreeDir ".treedir)
+   unlet s:prevwinopen
+"   call Dret("s:NetrwTreeDir ".treedir.": early return since s:treedir existed previously")
    return treedir
   endif
+  if exists("s:prevwinopen")
+   unlet s:prevwinopen
+  endif
 
   if !exists("b:netrw_curdir") || b:netrw_curdir == ""
    let b:netrw_curdir= getcwd()
@@ -9478,20 +9563,29 @@ endfun
 "                     Called by s:PerformListing()
 fun! s:NetrwTreeListing(dirname)
   if exists("w:netrw_liststyle") && w:netrw_liststyle == s:TREELIST
-"   call Dfunc("NetrwTreeListing() bufname<".expand("%").">")
+"   call Dfunc("s:NetrwTreeListing() bufname<".expand("%").">")
 "   call Decho("curdir<".a:dirname.">",'~'.expand("<slnum>"))
 "   call Decho("win#".winnr().": w:netrw_treetop ".(exists("w:netrw_treetop")? "exists" : "doesn't exist")." w:netrw_treedict ".(exists("w:netrw_treedict")? "exists" : "doesn't exit"),'~'.expand("<slnum>"))
 "   call Decho("g:netrw_banner=".g:netrw_banner.": banner ".(g:netrw_banner? "enabled" : "suppressed").": (line($)=".line("$")." byte2line(1)=".byte2line(1)." bannercnt=".w:netrw_bannercnt.")",'~'.expand("<slnum>"))
 
    " update the treetop
-"   call Decho("update the treetop",'~'.expand("<slnum>"))
    if !exists("w:netrw_treetop")
+"    call Decho("update the treetop  (w:netrw_treetop doesn't exist yet)",'~'.expand("<slnum>"))
     let w:netrw_treetop= a:dirname
+    let s:netrw_treetop= w:netrw_treetop
 "    call Decho("w:netrw_treetop<".w:netrw_treetop."> (reusing)",'~'.expand("<slnum>"))
    elseif (w:netrw_treetop =~ ('^'.a:dirname) && s:Strlen(a:dirname) < s:Strlen(w:netrw_treetop)) || a:dirname !~ ('^'.w:netrw_treetop)
+"    call Decho("update the treetop  (override w:netrw_treetop with a:dirname<".a:dirname.">)",'~'.expand("<slnum>"))
     let w:netrw_treetop= a:dirname
+    let s:netrw_treetop= w:netrw_treetop
 "    call Decho("w:netrw_treetop<".w:netrw_treetop."> (went up)",'~'.expand("<slnum>"))
    endif
+   if exists("w:netrw_treetop")
+    let s:netrw_treetop= w:netrw_treetop
+   else
+    let w:netrw_treetop= getcwd()
+    let s:netrw_treetop= w:netrw_treetop
+   endif
 
    if !exists("w:netrw_treedict")
     " insure that we have a treedict, albeit empty
@@ -9529,7 +9623,7 @@ fun! s:NetrwTreeListing(dirname)
 
    exe "setl ".g:netrw_bufsettings
 
-"   call Dret("NetrwTreeListing : bufname<".expand("%").">")
+"   call Dret("s:NetrwTreeListing : bufname<".expand("%").">")
    return
   endif
 endfun
@@ -9637,7 +9731,7 @@ fun! s:NetrwWideListing()
    let newcolstart = w:netrw_bannercnt + fpc
    let newcolend   = newcolstart + fpc - 1
 "   call Decho("bannercnt=".w:netrw_bannercnt." fpl=".w:netrw_fpl." fpc=".fpc." newcol[".newcolstart.",".newcolend."]",'~'.expand("<slnum>"))
-   if has("clipboard")
+   if has("clipboard") && g:netrw_clipboard
 "    call Decho("(s:NetrwWideListing) save @* and @+",'~'.expand("<slnum>"))
     sil! let keepregstar = @*
     sil! let keepregplus = @+
@@ -10683,7 +10777,7 @@ endfun
 " ---------------------------------------------------------------------
 " netrw#LocalBrowseCheck: {{{2
 fun! netrw#LocalBrowseCheck(dirname)
-  " This function is called by netrwPlugin.vim's s:LocalBrowse(), s:NetrwRexplore(),
+  " This function is called by netrwPlugin.vim's s:LocalBrowseCheck(), s:NetrwRexplore(),
   " and by <cr> when atop a listed file/directory (via a buffer-local map)
   "
   " unfortunate interaction -- split window debugging can't be used here, must use
@@ -10834,7 +10928,7 @@ endfun
 "  Hiding   a buffer means that it will be re-used   when examined, hence "fast".
 "                       (re-using a buffer may not be as accurate)
 "
-"  s:netrw_events : doesn't exist, s:LocalFastBrowser() will install autocmds whena med or fast browsing
+"  s:netrw_events : doesn't exist, s:LocalFastBrowser() will install autocmds with medium-speed or fast browsing
 "                   =1: autocmds installed, but ignore next FocusGained event to avoid initial double-refresh of listing.
 "                       BufEnter may be first event, then a FocusGained event.  Ignore the first FocusGained event.
 "                       If :Explore used: it sets s:netrw_events to 2, so no FocusGained events are ignored.
@@ -10996,13 +11090,14 @@ fun! s:LocalListing()
      let sz= s:NetrwHumanReadable(sz)
     endif
     let longfile= printf("%-".(g:netrw_maxfilenamelen+1)."s",pfile)
-    let pfile   = longfile.fsz." ".strftime(g:netrw_timefmt,getftime(filename))
+    let pfile   = longfile.sz." ".strftime(g:netrw_timefmt,getftime(filename))
 "    call Decho("longlist support: sz=".sz." fsz=".fsz,'~'.expand("<slnum>"))
    endif
 
    if     g:netrw_sort_by =~# "^t"
     " sort by time (handles time up to 1 quintillion seconds, US)
     " Decorate listing by prepending a timestamp/  .  Sorting will then be done based on time.
+"    call Decho("implementing g:netrw_sort_by=".g:netrw_sort_by." (time)")
 "    call Decho("getftime(".filename.")=".getftime(filename),'~'.expand("<slnum>"))
     let t  = getftime(filename)
     let ft = strpart("000000000000000000",1,18-strlen(t)).t
@@ -11012,6 +11107,7 @@ fun! s:LocalListing()
 
    elseif g:netrw_sort_by =~ "^s"
     " sort by size (handles file sizes up to 1 quintillion bytes, US)
+"    call Decho("implementing g:netrw_sort_by=".g:netrw_sort_by." (size)")
 "    call Decho("getfsize(".filename.")=".getfsize(filename),'~'.expand("<slnum>"))
     let sz   = getfsize(filename)
     if g:netrw_sizestyle =~# "[hH]"
@@ -11024,6 +11120,7 @@ fun! s:LocalListing()
 
    else
     " sort by name
+"    call Decho("implementing g:netrw_sort_by=".g:netrw_sort_by." (name)")
 "    call Decho("exe NetrwKeepj put ='".pfile."'",'~'.expand("<slnum>"))
     sil! NetrwKeepj put=pfile
    endif
@@ -11746,19 +11843,32 @@ endfun
 
 " ---------------------------------------------------------------------
 " s:NetrwCursor: responsible for setting cursorline/cursorcolumn based upon g:netrw_cursor {{{2
-fun! s:NetrwCursor()
+fun! s:NetrwCursor(editfile)
   if !exists("w:netrw_liststyle")
    let w:netrw_liststyle= g:netrw_liststyle
   endif
 "  call Dfunc("s:NetrwCursor() ft<".&ft."> liststyle=".w:netrw_liststyle." g:netrw_cursor=".g:netrw_cursor." s:netrw_usercuc=".s:netrw_usercuc." s:netrw_usercul=".s:netrw_usercul)
 
+"  call Decho("(s:NetrwCursor) COMBAK: cuc=".&l:cuc." cul=".&l:cul)
+
   if &ft != "netrw"
    " if the current window isn't a netrw directory listing window, then use user cursorline/column
    " settings.  Affects when netrw is used to read/write a file using scp/ftp/etc.
 "   call Decho("case ft!=netrw: use user cul,cuc",'~'.expand("<slnum>"))
-   let &l:cursorline   = s:netrw_usercul
-   let &l:cursorcolumn = s:netrw_usercuc
 
+  elseif g:netrw_cursor == 8
+   if w:netrw_liststyle == s:WIDELIST
+    setl cursorline
+    setl cursorcolumn
+   else
+    setl cursorline
+   endif
+  elseif g:netrw_cursor == 7
+    setl cursorline
+  elseif g:netrw_cursor == 6
+   if w:netrw_liststyle == s:WIDELIST
+    setl cursorline
+   endif
   elseif g:netrw_cursor == 4
    " all styles: cursorline, cursorcolumn
 "   call Decho("case g:netrw_cursor==4: setl cul cuc",'~'.expand("<slnum>"))
@@ -11775,26 +11885,22 @@ fun! s:NetrwCursor()
    else
 "    call Decho("case g:netrw_cursor==3 and not wide: setl cul (use user's cuc)",'~'.expand("<slnum>"))
     setl cursorline
-    let &l:cursorcolumn   = s:netrw_usercuc
    endif
 
   elseif g:netrw_cursor == 2
    " thin-long-tree: cursorline, user's cursorcolumn
    " wide          : cursorline, user's cursorcolumn
 "   call Decho("case g:netrw_cursor==2: setl cuc (use user's cul)",'~'.expand("<slnum>"))
-   let &l:cursorcolumn = s:netrw_usercuc
    setl cursorline
 
   elseif g:netrw_cursor == 1
    " thin-long-tree: user's cursorline, user's cursorcolumn
    " wide          : cursorline,        user's cursorcolumn
-   let &l:cursorcolumn = s:netrw_usercuc
    if w:netrw_liststyle == s:WIDELIST
 "    call Decho("case g:netrw_cursor==2 and wide: setl cul (use user's cuc)",'~'.expand("<slnum>"))
     setl cursorline
    else
 "    call Decho("case g:netrw_cursor==2 and not wide: (use user's cul,cuc)",'~'.expand("<slnum>"))
-    let &l:cursorline   = s:netrw_usercul
    endif
 
   else
@@ -11804,6 +11910,7 @@ fun! s:NetrwCursor()
    let &l:cursorcolumn = s:netrw_usercuc
   endif
 
+" call Decho("(s:NetrwCursor) COMBAK: cuc=".&l:cuc." cul=".&l:cul)
 "  call Dret("s:NetrwCursor : l:cursorline=".&l:cursorline." l:cursorcolumn=".&l:cursorcolumn)
 endfun
 
@@ -11817,6 +11924,7 @@ fun! s:RestoreCursorline()
   if exists("s:netrw_usercuc")
    let &l:cursorcolumn = s:netrw_usercuc
   endif
+"  call Decho("(s:RestoreCursorline) COMBAK: cuc=".&l:cuc." cul=".&l:cul)
 "  call Dret("s:RestoreCursorline : restored cul=".&l:cursorline." cuc=".&l:cursorcolumn)
 endfun
 
@@ -11851,12 +11959,38 @@ fun! s:NetrwDelete(path)
   return result
 endfun
 
+" ---------------------------------------------------------------------
+" s:NetrwBufRemover: removes a buffer that: {{{2s
+"                    has buffer-id > 1
+"                    is unlisted
+"                    is unnamed
+"                    does not appear in any window
+fun! s:NetrwBufRemover(bufid)
+"  call Dfunc("s:NetrwBufRemover(".a:bufid.")")
+"  call Decho("buf#".a:bufid."           ".((a:bufid > 1)? ">" : "≯")." must be >1 for removal","~".expand("<slnum>"))
+"  call Decho("buf#".a:bufid." is        ".(buflisted(a:bufid)? "listed" : "unlisted"),"~".expand("<slnum>"))
+"  call Decho("buf#".a:bufid." has name <".bufname(a:bufid).">","~".expand("<slnum>"))
+"  call Decho("buf#".a:bufid." has winid#".bufwinid(a:bufid),"~".expand("<slnum>"))
+
+  if a:bufid > 1 && !buflisted(a:bufid) && bufname(a:bufid) == "" && bufwinid(a:bufid) == -1
+"   call Decho("(s:NetrwBufRemover) removing buffer#".a:bufid,"~".expand("<slnum>"))
+   exe "bd! ".a:bufid
+  endif
+
+"  call Dret("s:NetrwBufRemover")
+endfun
+
 " ---------------------------------------------------------------------
 " s:NetrwEnew: opens a new buffer, passes netrw buffer variables through {{{2
 fun! s:NetrwEnew(...)
 "  call Dfunc("s:NetrwEnew() a:0=".a:0." win#".winnr()." winnr($)=".winnr("$")." bufnr($)=".bufnr("$")." expand(%)<".expand("%").">")
 "  call Decho("curdir<".((a:0>0)? a:1 : "")."> buf#".bufnr("%")."<".bufname("%").">",'~'.expand("<slnum>"))
 
+  " Clean out the last buffer: 
+  " Check if the last buffer has # > 1, is unlisted, is unnamed, and does not appear in a window
+  " If so, delete it.
+  call s:NetrwBufRemover(bufnr("$"))
+
   " grab a function-local-variable copy of buffer variables
 "  call Decho("make function-local copy of netrw variables",'~'.expand("<slnum>"))
   if exists("b:netrw_bannercnt")      |let netrw_bannercnt       = b:netrw_bannercnt      |endif

runtime/autoload/netrwSettings.vim

@@ -1,7 +1,7 @@
 " netrwSettings.vim: makes netrw settings simpler
-" Date:		Nov 09, 2016
+" Date:		Aug 12, 2021
 " Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
-" Version:	16
+" Version:	17	ASTRO-ONLY
 " Copyright:    Copyright (C) 1999-2007 Charles E. Campbell {{{1
 "               Permission is hereby granted to use and distribute this code,
 "               with or without modifications, provided that this copyright
@@ -19,7 +19,7 @@
 if exists("g:loaded_netrwSettings") || &cp
   finish
 endif
-let g:loaded_netrwSettings = "v16"
+let g:loaded_netrwSettings = "v17"
 if v:version < 700
  echohl WarningMsg
  echo "***warning*** this version of netrwSettings needs vim 7.0"
@@ -31,7 +31,7 @@ endif
 " NetrwSettings: {{{1
 fun! netrwSettings#NetrwSettings()
   " this call is here largely just to insure that netrw has been loaded
-  call netrw#SavePosn()
+  call netrw#WinPath("")
   if !exists("g:loaded_netrw")
    echohl WarningMsg | echomsg "***sorry*** netrw needs to be loaded prior to using NetrwSettings" | echohl None
    return

runtime/autoload/phpcomplete.vim

@@ -9,7 +9,7 @@
 "
 "		let g:phpcomplete_relax_static_constraint = 1/0  [default 0]
 "			Enables completion for non-static methods when completing for static context (::).
-"			This generates E_STRICT level warning, but php calls these methods nontheless.
+"			This generates E_STRICT level warning, but php calls these methods nonetheless.
 "
 "		let g:phpcomplete_complete_for_unknown_classes = 1/0 [default 0]
 "			Enables completion of variables and functions in "everything under the sun" fashion
@@ -28,7 +28,7 @@
 "			This option controls the number of characters the user needs to type before
 "			the tags will be searched for namespaces and classes in typed out namespaces in
 "			"use ..." context. Setting this to 0 is not recommended because that means the code
-"			have to scan every tag, and vim's taglist() function runs extremly slow with a
+"			have to scan every tag, and vim's taglist() function runs extremely slow with a
 "			"match everything" pattern.
 "
 "		let g:phpcomplete_parse_docblock_comments = 1/0 [default 0]
@@ -263,7 +263,7 @@ function! phpcomplete#CompleteUse(base) " {{{
 				call add(no_namespace_matches, {'word': namespace_for_class.'\'.tag.name, 'kind': tag.kind, 'menu': tag.filename, 'info': tag.filename })
 			endif
 		endfor
-		" if it seems that the tags file have namespace informations we can safely throw
+		" if it seems that the tags file have namespace information we can safely throw
 		" away namespaceless tag matches since we can be sure they are invalid
 		if patched_ctags_detected
 			no_namespace_matches = []
@@ -805,7 +805,7 @@ function! phpcomplete#CompleteClassName(base, kinds, current_namespace, imports)
 		endif
 	endfor
 
-	" resolve the typed in part with namespaces (if theres a \ in it)
+	" resolve the typed in part with namespaces (if there's a \ in it)
 	let [tag_match_pattern, namespace_for_class] = phpcomplete#ExpandClassName(a:base, a:current_namespace, a:imports)
 
 	let tags = []
@@ -921,11 +921,11 @@ function! s:getNextCharWithPos(filelines, current_pos) " {{{
 endfunction " }}}
 
 function! phpcomplete#EvaluateModifiers(modifiers, required_modifiers, prohibited_modifiers) " {{{
-	" if theres no modifier, and no modifier is allowed and no modifier is required
+	" if there's no modifier, and no modifier is allowed and no modifier is required
 	if len(a:modifiers) == 0 && len(a:required_modifiers) == 0
 		return 1
 	else
-		" check if every requred modifier is present
+		" check if every required modifier is present
 		for required_modifier in a:required_modifiers
 			if index(a:modifiers, required_modifier) == -1
 				return 0
@@ -1253,7 +1253,7 @@ function! phpcomplete#GetCurrentInstruction(line_number, col_number, phpbegin) "
 				endif
 			endif
 
-			" save the coma position for later use if theres a "naked" , possibly separating a parameter and it is not in a parented part
+			" save the coma position for later use if there's a "naked" , possibly separating a parameter and it is not in a parented part
 			if first_coma_break_pos == -1 && current_char == ','
 				let first_coma_break_pos = len(instruction)
 			endif
@@ -1299,7 +1299,7 @@ function! phpcomplete#GetCurrentInstruction(line_number, col_number, phpbegin) "
 
 	" there were a "naked" coma in the instruction
 	if first_coma_break_pos != -1
-		if instruction !~? '^use' && instruction !~? '^class' " use ... statements and class delcarations should not be broken up by comas
+		if instruction !~? '^use' && instruction !~? '^class' " use ... statements and class declarations should not be broken up by comas
 			let pos = (-1 * first_coma_break_pos) + 1
 			let instruction = instruction[pos :]
 		endif
@@ -1311,7 +1311,7 @@ function! phpcomplete#GetCurrentInstruction(line_number, col_number, phpbegin) "
 		" clear everything up until the first (
 		let instruction = substitute(instruction, '^\(if\|while\|foreach\|for\)\s*(\s*', '', '')
 
-		" lets iterate trough the instruction until we can find the pair for the opening (
+		" lets iterate through the instruction until we can find the pair for the opening (
 		let i = 0
 		let depth = 1
 		while i < len(instruction)
@@ -1419,7 +1419,7 @@ function! phpcomplete#GetCallChainReturnType(classname_candidate, class_candidat
 						let parts = split(substitute(type, '^\\', '', ''), '\')
 						let class_candidate_namespace = join(parts[0:-2], '\')
 						let classname_candidate = parts[-1]
-						" check for renamed namepsace in imports
+						" check for renamed namespace in imports
 						if has_key(classstructure.imports, class_candidate_namespace)
 							let class_candidate_namespace = classstructure.imports[class_candidate_namespace].name
 						endif
@@ -2018,7 +2018,7 @@ function! phpcomplete#GetCachedClassContents(classlocation, class_name) " {{{
 			if getftime(classstructure.file) != classstructure.mtime
 				let valid = 0
 				" we could break here, but the time required for checking probably worth
-				" the the memory we can free by checking every file in the cached hirearchy
+				" the the memory we can free by checking every file in the cached hierarchy
 				call phpcomplete#ClearCachedClassContents(classstructure.file)
 			endif
 		endfor
@@ -2032,7 +2032,7 @@ function! phpcomplete#GetCachedClassContents(classlocation, class_name) " {{{
 			call remove(s:cache_classstructures, cache_key)
 			call phpcomplete#ClearCachedClassContents(full_file_path)
 
-			" fall trough for the read from files path
+			" fall through for the read from files path
 		endif
 	else
 		call phpcomplete#ClearCachedClassContents(full_file_path)
@@ -2141,7 +2141,7 @@ function! phpcomplete#GetClassContentsStructure(file_path, file_lines, class_nam
 			let l = lnum
 			let search_line = trait_line
 
-			" add lines from the file until theres no ';' in them
+			" add lines from the file until there's no ';' in them
 			while search_line !~? ';' && l > 0
 				" file lines are reversed so we need to go backwards
 				let l += 1
@@ -2573,7 +2573,7 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 				let search_line = line
 				let use_line = line
 
-				" add lines from the file until theres no ';' in them
+				" add lines from the file until there's no ';' in them
 				while search_line !~? ';' && l > 0
 					" file lines are reversed so we need to go backwards
 					let l -= 1
@@ -2605,7 +2605,7 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 			" find kind flags from tags or built in methods for the objects we extracted
 			" they can be either classes, interfaces or namespaces, no other thing is importable in php
 			for [key, import] in items(imports)
-				" if theres a \ in the name we have it's definitely not a built in thing, look for tags
+				" if there's a \ in the name we have it's definitely not a built in thing, look for tags
 				if import.name =~ '\\'
 					let patched_ctags_detected = 0
 					let [classname, namespace_for_classes] = phpcomplete#ExpandClassName(import.name, '\', {})
@@ -2662,10 +2662,10 @@ function! phpcomplete#GetCurrentNameSpace(file_lines) " {{{
 						let import['kind'] = 'i'
 						let import['builtin'] = 1
 					else
-						" or can be a tag with exactly matchign name
+						" or can be a tag with exactly matching name
 						let tags = phpcomplete#GetTaglist('^'.import['name'].'$')
 						for tag in tags
-							" search for the first matchin namespace, class, interface with no namespace
+							" search for the first matching namespace, class, interface with no namespace
 							if !has_key(tag, 'namespace') && (tag.kind == 'n' || tag.kind == 'c' || tag.kind == 'i' || tag.kind == 't')
 								call extend(import, tag)
 								let import['builtin'] = 0
@@ -2883,7 +2883,7 @@ for [ext, data] in items(php_builtin['functions'])
 	call extend(g:php_builtin_functions, data)
 endfor
 
-" Built in classs
+" Built in class
 let g:php_builtin_classes = {}
 for [ext, data] in items(php_builtin['classes'])
 	call extend(g:php_builtin_classes, data)
@@ -2901,10 +2901,10 @@ for [ext, data] in items(php_builtin['constants'])
 	call extend(g:php_constants, data)
 endfor
 
-" When the classname not found or found but the tags dosen't contain that
-" class we will try to complate any method of any builtin class. To speed up
+" When the classname not found or found but the tags doesn't contain that
+" class we will try to complete any method of any builtin class. To speed up
 " that lookup we compile a 'ClassName::MethodName':'info' dictionary from the
-" builtin class informations
+" builtin class information
 let g:php_builtin_object_functions = {}
 
 " When completing for 'everyting imaginable' (no class context, not a

runtime/autoload/python3complete.vim

@@ -2,7 +2,7 @@
 " Maintainer: <vacancy>
 " Previous Maintainer: Aaron Griffin <aaronmgriffin@gmail.com>
 " Version: 0.9
-" Last Updated: 2020 Oct 9
+" Last Updated: 2022 Mar 30
 "
 " Roland Puntaier: this file contains adaptations for python3 and is parallel to pythoncomplete.vim
 "
@@ -91,6 +91,9 @@ endfunction
 
 function! s:DefPython()
 py3 << PYTHONEOF
+import warnings
+warnings.simplefilter(action='ignore', category=FutureWarning)
+
 import sys, tokenize, io, types
 from token import NAME, DEDENT, NEWLINE, STRING
 
@@ -173,7 +176,7 @@ class Completer(object):
                 pass
         if len(arg_text) == 0:
             # The doc string sometimes contains the function signature
-            #  this works for alot of C modules that are part of the
+            #  this works for a lot of C modules that are part of the
             #  standard library
             doc = func_obj.__doc__
             if doc:

runtime/autoload/pythoncomplete.vim

@@ -191,7 +191,7 @@ class Completer(object):
                 pass
         if len(arg_text) == 0:
             # The doc string sometimes contains the function signature
-            #  this works for alot of C modules that are part of the
+            #  this works for a lot of C modules that are part of the
             #  standard library
             doc = func_obj.__doc__
             if doc:

runtime/autoload/rubycomplete.vim

@@ -3,7 +3,7 @@
 " Maintainer:		Mark Guzman <segfault@hasno.info>
 " URL:			https://github.com/vim-ruby/vim-ruby
 " Release Coordinator:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:		2019 Feb 25
+" Last Change:		2020 Apr 12
 " ----------------------------------------------------------------------------
 "
 " Ruby IRB/Complete author: Keiju ISHITSUKA(keiju@ishitsuka.com)
@@ -501,13 +501,8 @@ class VimRubyCompletion
     return if rails_base == nil
     $:.push rails_base unless $:.index( rails_base )
 
-    rails_config = rails_base + "config/"
-    rails_lib = rails_base + "lib/"
-    $:.push rails_config unless $:.index( rails_config )
-    $:.push rails_lib unless $:.index( rails_lib )
-
-    bootfile = rails_config + "boot.rb"
-    envfile = rails_config + "environment.rb"
+    bootfile = rails_base + "config/boot.rb"
+    envfile = rails_base + "config/environment.rb"
     if File.exists?( bootfile ) && File.exists?( envfile )
       begin
         require bootfile

runtime/autoload/sqlcomplete.vim

@@ -17,7 +17,7 @@
 "       and complete it.
 "
 " Version 16.0 (Dec 2015)
-"     - NF: If reseting the cache and table, procedure or view completion
+"     - NF: If resetting the cache and table, procedure or view completion
 "           had been used via dbext, have dbext delete or recreate the 
 "           dictionary so that new objects are picked up for the 
 "           next completion.
@@ -554,7 +554,7 @@ function! sqlcomplete#PreCacheSyntax(...)
         let syn_group_arr = g:omni_sql_precache_syntax_groups
     endif
     " For each group specified in the list, precache all
-    " the sytnax items.
+    " the syntax items.
     if !empty(syn_group_arr)
         for group_name in syn_group_arr
             let syn_items = extend( syn_items, s:SQLCGetSyntaxList(group_name) )
@@ -577,7 +577,7 @@ function! sqlcomplete#ResetCacheSyntax(...)
         let syn_group_arr = g:omni_sql_precache_syntax_groups
     endif
     " For each group specified in the list, precache all
-    " the sytnax items.
+    " the syntax items.
     if !empty(syn_group_arr)
         for group_name in syn_group_arr
             let list_idx = index(s:syn_list, group_name, 0, &ignorecase)
@@ -617,7 +617,7 @@ function! sqlcomplete#DrillIntoTable()
     else
 	" If the popup is not visible, simple perform the normal
 	" key behaviour.
-	" Must use exec since they key must be preceeded by "\"
+	" Must use exec since the key must be preceded by "\"
 	" or feedkeys will simply push each character of the string
 	" rather than the "key press".
         exec 'call feedkeys("\'.g:ftplugin_sql_omni_key_right.'", "n")'
@@ -634,7 +634,7 @@ function! sqlcomplete#DrillOutOfColumns()
     else
 	" If the popup is not visible, simple perform the normal
 	" key behaviour.
-	" Must use exec since they key must be preceeded by "\"
+	" Must use exec since the key must be preceded by "\"
 	" or feedkeys will simply push each character of the string
 	" rather than the "key press".
         exec 'call feedkeys("\'.g:ftplugin_sql_omni_key_left.'", "n")'
@@ -843,7 +843,7 @@ function! s:SQLCGetColumns(table_name, list_type)
          let curline    = line(".")
          let curcol     = col(".")
 
-         " Do not let searchs wrap
+         " Do not let searches wrap
          setlocal nowrapscan
          " If . was entered, look at the word just before the .
          " We are looking for something like this:
@@ -863,7 +863,7 @@ function! s:SQLCGetColumns(table_name, list_type)
          " Search forward until one of the following:
          "     1.  Another select/update/delete statement
          "     2.  A ; at the end of a line (the delimiter)
-         "     3.  The end of the file (incase no delimiter)
+         "     3.  The end of the file (in case no delimiter)
          " Yank the visually selected text into the "y register.
          exec 'silent! normal! vl/\c\(\<select\>\|\<update\>\|\<delete\>\|;\s*$\|\%$\)'."\n".'"yy'
 

runtime/autoload/tar.vim

@@ -778,7 +778,7 @@ fun! tar#Vimuntar(...)
    elseif executable("gzip")
     silent exe "!gzip -d ".shellescape(tartail)
    else
-    echoerr "unable to decompress<".tartail."> on this sytem"
+    echoerr "unable to decompress<".tartail."> on this system"
     if simplify(curdir) != simplify(tarhome)
      " remove decompressed tarball, restore directory
 "     call Decho("delete(".tartail.".tar)")

runtime/autoload/tohtml.vim

@@ -693,7 +693,7 @@ func! tohtml#GetUserSettings() "{{{
     let user_settings = {}
 
     " Define the correct option if the old option name exists and we haven't
-    " already defined the correct one. Maybe I'll put out a warnig message about
+    " already defined the correct one. Maybe I'll put out a warning message about
     " this sometime and remove the old option entirely at some even later time,
     " but for now just silently accept the old option.
     if exists('g:use_xhtml') && !exists("g:html_use_xhtml")

runtime/autoload/xmlcomplete.vim

@@ -199,7 +199,7 @@ function! xmlcomplete#CompleteTags(findstart, base)
 	" 1. Events attributes
 	if context =~ '\s'
 
-		" If attr contains =\s*[\"'] we catched value of attribute
+		" If attr contains =\s*[\"'] we catch value of attribute
 		if attr =~ "=\s*[\"']" || attr =~ "=\s*$"
 			" Let do attribute specific completion
 			let attrname = matchstr(attr, '.*\ze\s*=')

runtime/autoload/zip.vim

@@ -1,7 +1,7 @@
 " zip.vim: Handles browsing zipfiles
 "            AUTOLOAD PORTION
-" Date:		Jan 07, 2020
-" Version:	31
+" Date:		Nov 08, 2021
+" Version:	32
 " Maintainer:	Charles E Campbell <NcampObell@SdrPchip.AorgM-NOSPAM>
 " License:	Vim License  (see vim's :help license)
 " Copyright:    Copyright (C) 2005-2019 Charles E. Campbell {{{1
@@ -20,7 +20,7 @@
 if &cp || exists("g:loaded_zip")
  finish
 endif
-let g:loaded_zip= "v31"
+let g:loaded_zip= "v32"
 if v:version < 702
  echohl WarningMsg
  echo "***warning*** this version of zip needs vim 7.2 or later"
@@ -81,7 +81,7 @@ fun! zip#Browse(zipfile)
   " sanity checks
   if !exists("*fnameescape")
    if &verbose > 1
-    echoerr "the zip plugin is not available (your vim doens't support fnameescape())"
+    echoerr "the zip plugin is not available (your vim doesn't support fnameescape())"
    endif
    return
   endif
@@ -115,7 +115,13 @@ fun! zip#Browse(zipfile)
   setlocal bufhidden=hide
   setlocal nobuflisted
   setlocal nowrap
-  set ft=tar
+
+  " Oct 12, 2021: need to re-use Bram's syntax/tar.vim.
+  " Setting the filetype to zip doesn't do anything (currently),
+  " but it is perhaps less confusing to curious perusers who do
+  " a :echo &ft
+  setf zip
+  run! syntax/tar.vim
 
   " give header
   call append(0, ['" zip.vim version '.g:loaded_zip,
@@ -187,8 +193,8 @@ fun! s:ZipBrowseSelect()
    wincmd _
   endif
   let s:zipfile_{winnr()}= curfile
-"  call Decho("exe e ".fnameescape("zipfile:".zipfile.'::'.fname))
-  exe "noswapfile e ".fnameescape("zipfile:".zipfile.'::'.fname)
+"  call Decho("exe e ".fnameescape("zipfile://".zipfile.'::'.fname))
+  exe "noswapfile e ".fnameescape("zipfile://".zipfile.'::'.fname)
   filetype detect
 
   let &report= repkeep
@@ -203,11 +209,11 @@ fun! zip#Read(fname,mode)
   set report=10
 
   if has("unix")
-   let zipfile = substitute(a:fname,'zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'zipfile://.\{-}::\([^\\].*\)$','\1','')
   else
-   let zipfile = substitute(a:fname,'^.\{-}zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'^.\{-}zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'^.\{-}zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'^.\{-}zipfile://.\{-}::\([^\\].*\)$','\1','')
    let fname   = substitute(fname, '[', '[[]', 'g')
   endif
 "  call Decho("zipfile<".zipfile.">")
@@ -224,7 +230,7 @@ fun! zip#Read(fname,mode)
 
   " the following code does much the same thing as
   "   exe "keepj sil! r! ".g:zip_unzipcmd." -p -- ".s:Escape(zipfile,1)." ".s:Escape(fnameescape(fname),1)
-  " but allows zipfile:... entries in quickfix lists
+  " but allows zipfile://... entries in quickfix lists
   let temp = tempname()
 "  call Decho("using temp file<".temp.">")
   let fn   = expand('%:p')
@@ -296,11 +302,11 @@ fun! zip#Write(fname)
 "  call Decho("current directory now: ".getcwd())
 
   if has("unix")
-   let zipfile = substitute(a:fname,'zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'zipfile://.\{-}::\([^\\].*\)$','\1','')
   else
-   let zipfile = substitute(a:fname,'^.\{-}zipfile:\(.\{-}\)::[^\\].*$','\1','')
-   let fname   = substitute(a:fname,'^.\{-}zipfile:.\{-}::\([^\\].*\)$','\1','')
+   let zipfile = substitute(a:fname,'^.\{-}zipfile://\(.\{-}\)::[^\\].*$','\1','')
+   let fname   = substitute(a:fname,'^.\{-}zipfile://.\{-}::\([^\\].*\)$','\1','')
   endif
 "  call Decho("zipfile<".zipfile.">")
 "  call Decho("fname  <".fname.">")

runtime/colors/README.txt

@@ -87,4 +87,5 @@ please check the following items:
 - In the GUI, is it easy to find the cursor, also in a file with lots of
   syntax highlighting?
 - Do not use hard coded escape sequences, these will not work in other
-  terminals.  Always use color names or #RRGGBB for the GUI.
+  terminals.  Always use color names or #RRGGBB for the GUI. See v:colornames
+  for details on how to define your own color names.

runtime/colors/lists/csscolors.vim

@@ -0,0 +1,166 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2021 Jul 25
+
+" Similar in spirit to rgb.txt, this plugin establishes a human-friendly name
+" for every color listed in the CSS standard:
+"
+" https://www.w3.org/TR/css-color-3/
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'css_black': '#000000',
+			\ 'css_silver': '#c0c0c0',
+			\ 'css_gray': '#808080',
+			\ 'css_white': '#FFFFFF',
+			\ 'css_maroon': '#800000',
+			\ 'css_red': '#FF0000',
+			\ 'css_purple': '#800080',
+			\ 'css_fuchsia': '#FF00FF',
+			\ 'css_green': '#008000',
+			\ 'css_lime': '#00FF00',
+			\ 'css_olive': '#808000',
+			\ 'css_yellow': '#FFFF00',
+			\ 'css_navy': '#000080',
+			\ 'css_blue': '#0000FF',
+			\ 'css_teal': '#008080',
+			\ 'css_aqua': '#00FFFF',
+			\
+			\ 'css_aliceblue': '#f0f8ff',
+			\ 'css_antiquewhite': '#faebd7',
+			\ 'css_aquamarine': '#7fffd4',
+			\ 'css_azure': '#f0ffff',
+			\ 'css_beige': '#f5f5dc',
+			\ 'css_bisque': '#ffe4c4',
+			\ 'css_blanchedalmond': '#ffebcd',
+			\ 'css_blueviolet': '#8a2be2',
+			\ 'css_brown': '#a52a2a',
+			\ 'css_burlywood': '#deb887',
+			\ 'css_cadetblue': '#5f9ea0',
+			\ 'css_chartreuse': '#7fff00',
+			\ 'css_chocolate': '#d2691e',
+			\ 'css_coral': '#ff7f50',
+			\ 'css_cornflowerblue': '#6495ed',
+			\ 'css_cornsilk': '#fff8dc',
+			\ 'css_crimson': '#dc143c',
+			\ 'css_cyan': '#00ffff',
+			\ 'css_darkblue': '#00008b',
+			\ 'css_darkcyan': '#008b8b',
+			\ 'css_darkgoldenrod': '#b8860b',
+			\ 'css_darkgray': '#a9a9a9',
+			\ 'css_darkgreen': '#006400',
+			\ 'css_darkgrey': '#a9a9a9',
+			\ 'css_darkkhaki': '#bdb76b',
+			\ 'css_darkmagenta': '#8b008b',
+			\ 'css_darkolivegreen': '#556b2f',
+			\ 'css_darkorange': '#ff8c00',
+			\ 'css_darkorchid': '#9932cc',
+			\ 'css_darkred': '#8b0000',
+			\ 'css_darksalmon': '#e9967a',
+			\ 'css_darkseagreen': '#8fbc8f',
+			\ 'css_darkslateblue': '#483d8b',
+			\ 'css_darkslategray': '#2f4f4f',
+			\ 'css_darkslategrey': '#2f4f4f',
+			\ 'css_darkturquoise': '#00ced1',
+			\ 'css_darkviolet': '#9400d3',
+			\ 'css_deeppink': '#ff1493',
+			\ 'css_deepskyblue': '#00bfff',
+			\ 'css_dimgray': '#696969',
+			\ 'css_dimgrey': '#696969',
+			\ 'css_dodgerblue': '#1e90ff',
+			\ 'css_firebrick': '#b22222',
+			\ 'css_floralwhite': '#fffaf0',
+			\ 'css_forestgreen': '#228b22',
+			\ 'css_gainsboro': '#dcdcdc',
+			\ 'css_ghostwhite': '#f8f8ff',
+			\ 'css_gold': '#ffd700',
+			\ 'css_goldenrod': '#daa520',
+			\ 'css_greenyellow': '#adff2f',
+			\ 'css_grey': '#808080',
+			\ 'css_honeydew': '#f0fff0',
+			\ 'css_hotpink': '#ff69b4',
+			\ 'css_indianred': '#cd5c5c',
+			\ 'css_indigo': '#4b0082',
+			\ 'css_ivory': '#fffff0',
+			\ 'css_khaki': '#f0e68c',
+			\ 'css_lavender': '#e6e6fa',
+			\ 'css_lavenderblush': '#fff0f5',
+			\ 'css_lawngreen': '#7cfc00',
+			\ 'css_lemonchiffon': '#fffacd',
+			\ 'css_lightblue': '#add8e6',
+			\ 'css_lightcoral': '#f08080',
+			\ 'css_lightcyan': '#e0ffff',
+			\ 'css_lightgoldenrodyellow': '#fafad2',
+			\ 'css_lightgray': '#d3d3d3',
+			\ 'css_lightgreen': '#90ee90',
+			\ 'css_lightgrey': '#d3d3d3',
+			\ 'css_lightpink': '#ffb6c1',
+			\ 'css_lightsalmon': '#ffa07a',
+			\ 'css_lightseagreen': '#20b2aa',
+			\ 'css_lightskyblue': '#87cefa',
+			\ 'css_lightslategray': '#778899',
+			\ 'css_lightslategrey': '#778899',
+			\ 'css_lightsteelblue': '#b0c4de',
+			\ 'css_lightyellow': '#ffffe0',
+			\ 'css_limegreen': '#32cd32',
+			\ 'css_linen': '#faf0e6',
+			\ 'css_magenta': '#ff00ff',
+			\ 'css_mediumaquamarine': '#66cdaa',
+			\ 'css_mediumblue': '#0000cd',
+			\ 'css_mediumorchid': '#ba55d3',
+			\ 'css_mediumpurple': '#9370db',
+			\ 'css_mediumseagreen': '#3cb371',
+			\ 'css_mediumslateblue': '#7b68ee',
+			\ 'css_mediumspringgreen': '#00fa9a',
+			\ 'css_mediumturquoise': '#48d1cc',
+			\ 'css_mediumvioletred': '#c71585',
+			\ 'css_midnightblue': '#191970',
+			\ 'css_mintcream': '#f5fffa',
+			\ 'css_mistyrose': '#ffe4e1',
+			\ 'css_moccasin': '#ffe4b5',
+			\ 'css_navajowhite': '#ffdead',
+			\ 'css_oldlace': '#fdf5e6',
+			\ 'css_olivedrab': '#6b8e23',
+			\ 'css_orange': '#ffa500',
+			\ 'css_orangered': '#ff4500',
+			\ 'css_orchid': '#da70d6',
+			\ 'css_palegoldenrod': '#eee8aa',
+			\ 'css_palegreen': '#98fb98',
+			\ 'css_paleturquoise': '#afeeee',
+			\ 'css_palevioletred': '#db7093',
+			\ 'css_papayawhip': '#ffefd5',
+			\ 'css_peachpuff': '#ffdab9',
+			\ 'css_peru': '#cd853f',
+			\ 'css_pink': '#ffc0cb',
+			\ 'css_plum': '#dda0dd',
+			\ 'css_powderblue': '#b0e0e6',
+			\ 'css_rosybrown': '#bc8f8f',
+			\ 'css_royalblue': '#4169e1',
+			\ 'css_saddlebrown': '#8b4513',
+			\ 'css_salmon': '#fa8072',
+			\ 'css_sandybrown': '#f4a460',
+			\ 'css_seagreen': '#2e8b57',
+			\ 'css_seashell': '#fff5ee',
+			\ 'css_sienna': '#a0522d',
+			\ 'css_skyblue': '#87ceeb',
+			\ 'css_slateblue': '#6a5acd',
+			\ 'css_slategray': '#708090',
+			\ 'css_slategrey': '#708090',
+			\ 'css_snow': '#fffafa',
+			\ 'css_springgreen': '#00ff7f',
+			\ 'css_steelblue': '#4682b4',
+			\ 'css_tan': '#d2b48c',
+			\ 'css_thistle': '#d8bfd8',
+			\ 'css_tomato': '#ff6347',
+			\ 'css_turquoise': '#40e0d0',
+			\ 'css_violet': '#ee82ee',
+			\ 'css_wheat': '#f5deb3',
+			\ 'css_whitesmoke': '#f5f5f5',
+			\ 'css_yellowgreen': '#9acd32',
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/colors/lists/default.vim

@@ -0,0 +1,807 @@
+" Maintainer:  Drew Vogel <dvogel@sidejump.org>
+" Last Change: 2022 Mar 20
+"
+" Replaced rgb.txt as the source of de facto standard color names. This is
+" sourced each time the colorscheme command is run. It is also sourced each
+" time the highlight command fails to recognize a gui color. You can override
+" these colors by introducing a new colors/lists/default.vim file earlier in
+" the runtimepath.
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+call extend(v:colornames, {
+			\ 'snow': '#fffafa',
+			\ 'ghost white': '#f8f8ff',
+			\ 'ghostwhite': '#f8f8ff',
+			\ 'white smoke': '#f5f5f5',
+			\ 'whitesmoke': '#f5f5f5',
+			\ 'gainsboro': '#dcdcdc',
+			\ 'floral white': '#fffaf0',
+			\ 'floralwhite': '#fffaf0',
+			\ 'old lace': '#fdf5e6',
+			\ 'oldlace': '#fdf5e6',
+			\ 'linen': '#faf0e6',
+			\ 'antique white': '#faebd7',
+			\ 'antiquewhite': '#faebd7',
+			\ 'papaya whip': '#ffefd5',
+			\ 'papayawhip': '#ffefd5',
+			\ 'blanched almond': '#ffebcd',
+			\ 'blanchedalmond': '#ffebcd',
+			\ 'bisque': '#ffe4c4',
+			\ 'peach puff': '#ffdab9',
+			\ 'peachpuff': '#ffdab9',
+			\ 'navajo white': '#ffdead',
+			\ 'navajowhite': '#ffdead',
+			\ 'moccasin': '#ffe4b5',
+			\ 'cornsilk': '#fff8dc',
+			\ 'ivory': '#fffff0',
+			\ 'lemon chiffon': '#fffacd',
+			\ 'lemonchiffon': '#fffacd',
+			\ 'seashell': '#fff5ee',
+			\ 'honeydew': '#f0fff0',
+			\ 'mint cream': '#f5fffa',
+			\ 'mintcream': '#f5fffa',
+			\ 'azure': '#f0ffff',
+			\ 'alice blue': '#f0f8ff',
+			\ 'aliceblue': '#f0f8ff',
+			\ 'lavender': '#e6e6fa',
+			\ 'lavender blush': '#fff0f5',
+			\ 'lavenderblush': '#fff0f5',
+			\ 'misty rose': '#ffe4e1',
+			\ 'mistyrose': '#ffe4e1',
+			\ 'white': '#ffffff',
+			\ 'black': '#000000',
+			\ 'dark slate gray': '#2f4f4f',
+			\ 'darkslategray': '#2f4f4f',
+			\ 'dark slate grey': '#2f4f4f',
+			\ 'darkslategrey': '#2f4f4f',
+			\ 'dim gray': '#696969',
+			\ 'dimgray': '#696969',
+			\ 'dim grey': '#696969',
+			\ 'dimgrey': '#696969',
+			\ 'slate gray': '#708090',
+			\ 'slategray': '#708090',
+			\ 'slate grey': '#708090',
+			\ 'slategrey': '#708090',
+			\ 'light slate gray': '#778899',
+			\ 'lightslategray': '#778899',
+			\ 'light slate grey': '#778899',
+			\ 'lightslategrey': '#778899',
+			\ 'gray': '#bebebe',
+			\ 'grey': '#bebebe',
+			\ 'x11 gray': '#bebebe',
+			\ 'x11gray': '#bebebe',
+			\ 'x11 grey': '#bebebe',
+			\ 'x11grey': '#bebebe',
+			\ 'web gray': '#808080',
+			\ 'webgray': '#808080',
+			\ 'web grey': '#808080',
+			\ 'webgrey': '#808080',
+			\ 'light grey': '#d3d3d3',
+			\ 'lightgrey': '#d3d3d3',
+			\ 'light gray': '#d3d3d3',
+			\ 'lightgray': '#d3d3d3',
+			\ 'midnight blue': '#191970',
+			\ 'midnightblue': '#191970',
+			\ 'navy': '#000080',
+			\ 'navy blue': '#000080',
+			\ 'navyblue': '#000080',
+			\ 'cornflower blue': '#6495ed',
+			\ 'cornflowerblue': '#6495ed',
+			\ 'dark slate blue': '#483d8b',
+			\ 'darkslateblue': '#483d8b',
+			\ 'slate blue': '#6a5acd',
+			\ 'slateblue': '#6a5acd',
+			\ 'medium slate blue': '#7b68ee',
+			\ 'mediumslateblue': '#7b68ee',
+			\ 'light slate blue': '#8470ff',
+			\ 'lightslateblue': '#8470ff',
+			\ 'medium blue': '#0000cd',
+			\ 'mediumblue': '#0000cd',
+			\ 'royal blue': '#4169e1',
+			\ 'royalblue': '#4169e1',
+			\ 'blue': '#0000ff',
+			\ 'dodger blue': '#1e90ff',
+			\ 'dodgerblue': '#1e90ff',
+			\ 'deep sky blue': '#00bfff',
+			\ 'deepskyblue': '#00bfff',
+			\ 'sky blue': '#87ceeb',
+			\ 'skyblue': '#87ceeb',
+			\ 'light sky blue': '#87cefa',
+			\ 'lightskyblue': '#87cefa',
+			\ 'steel blue': '#4682b4',
+			\ 'steelblue': '#4682b4',
+			\ 'light steel blue': '#b0c4de',
+			\ 'lightsteelblue': '#b0c4de',
+			\ 'light blue': '#add8e6',
+			\ 'lightblue': '#add8e6',
+			\ 'powder blue': '#b0e0e6',
+			\ 'powderblue': '#b0e0e6',
+			\ 'pale turquoise': '#afeeee',
+			\ 'paleturquoise': '#afeeee',
+			\ 'dark turquoise': '#00ced1',
+			\ 'darkturquoise': '#00ced1',
+			\ 'medium turquoise': '#48d1cc',
+			\ 'mediumturquoise': '#48d1cc',
+			\ 'turquoise': '#40e0d0',
+			\ 'cyan': '#00ffff',
+			\ 'aqua': '#00ffff',
+			\ 'light cyan': '#e0ffff',
+			\ 'lightcyan': '#e0ffff',
+			\ 'cadet blue': '#5f9ea0',
+			\ 'cadetblue': '#5f9ea0',
+			\ 'medium aquamarine': '#66cdaa',
+			\ 'mediumaquamarine': '#66cdaa',
+			\ 'aquamarine': '#7fffd4',
+			\ 'dark green': '#006400',
+			\ 'darkgreen': '#006400',
+			\ 'dark olive green': '#556b2f',
+			\ 'darkolivegreen': '#556b2f',
+			\ 'dark sea green': '#8fbc8f',
+			\ 'darkseagreen': '#8fbc8f',
+			\ 'sea green': '#2e8b57',
+			\ 'seagreen': '#2e8b57',
+			\ 'medium sea green': '#3cb371',
+			\ 'mediumseagreen': '#3cb371',
+			\ 'light sea green': '#20b2aa',
+			\ 'lightseagreen': '#20b2aa',
+			\ 'pale green': '#98fb98',
+			\ 'palegreen': '#98fb98',
+			\ 'spring green': '#00ff7f',
+			\ 'springgreen': '#00ff7f',
+			\ 'lawn green': '#7cfc00',
+			\ 'lawngreen': '#7cfc00',
+			\ 'green': '#00ff00',
+			\ 'lime': '#00ff00',
+			\ 'x11 green': '#00ff00',
+			\ 'x11green': '#00ff00',
+			\ 'web green': '#008000',
+			\ 'webgreen': '#008000',
+			\ 'chartreuse': '#7fff00',
+			\ 'medium spring green': '#00fa9a',
+			\ 'mediumspringgreen': '#00fa9a',
+			\ 'green yellow': '#adff2f',
+			\ 'greenyellow': '#adff2f',
+			\ 'lime green': '#32cd32',
+			\ 'limegreen': '#32cd32',
+			\ 'yellow green': '#9acd32',
+			\ 'yellowgreen': '#9acd32',
+			\ 'forest green': '#228b22',
+			\ 'forestgreen': '#228b22',
+			\ 'olive drab': '#6b8e23',
+			\ 'olivedrab': '#6b8e23',
+			\ 'dark khaki': '#bdb76b',
+			\ 'darkkhaki': '#bdb76b',
+			\ 'khaki': '#f0e68c',
+			\ 'pale goldenrod': '#eee8aa',
+			\ 'palegoldenrod': '#eee8aa',
+			\ 'light goldenrod yellow': '#fafad2',
+			\ 'lightgoldenrodyellow': '#fafad2',
+			\ 'light yellow': '#ffffe0',
+			\ 'lightyellow': '#ffffe0',
+			\ 'yellow': '#ffff00',
+			\ 'gold': '#ffd700',
+			\ 'light goldenrod': '#eedd82',
+			\ 'lightgoldenrod': '#eedd82',
+			\ 'goldenrod': '#daa520',
+			\ 'dark goldenrod': '#b8860b',
+			\ 'darkgoldenrod': '#b8860b',
+			\ 'rosy brown': '#bc8f8f',
+			\ 'rosybrown': '#bc8f8f',
+			\ 'indian red': '#cd5c5c',
+			\ 'indianred': '#cd5c5c',
+			\ 'saddle brown': '#8b4513',
+			\ 'saddlebrown': '#8b4513',
+			\ 'sienna': '#a0522d',
+			\ 'peru': '#cd853f',
+			\ 'burlywood': '#deb887',
+			\ 'beige': '#f5f5dc',
+			\ 'wheat': '#f5deb3',
+			\ 'sandy brown': '#f4a460',
+			\ 'sandybrown': '#f4a460',
+			\ 'tan': '#d2b48c',
+			\ 'chocolate': '#d2691e',
+			\ 'firebrick': '#b22222',
+			\ 'brown': '#a52a2a',
+			\ 'dark salmon': '#e9967a',
+			\ 'darksalmon': '#e9967a',
+			\ 'salmon': '#fa8072',
+			\ 'light salmon': '#ffa07a',
+			\ 'lightsalmon': '#ffa07a',
+			\ 'orange': '#ffa500',
+			\ 'dark orange': '#ff8c00',
+			\ 'darkorange': '#ff8c00',
+			\ 'coral': '#ff7f50',
+			\ 'light coral': '#f08080',
+			\ 'lightcoral': '#f08080',
+			\ 'tomato': '#ff6347',
+			\ 'orange red': '#ff4500',
+			\ 'orangered': '#ff4500',
+			\ 'red': '#ff0000',
+			\ 'hot pink': '#ff69b4',
+			\ 'hotpink': '#ff69b4',
+			\ 'deep pink': '#ff1493',
+			\ 'deeppink': '#ff1493',
+			\ 'pink': '#ffc0cb',
+			\ 'light pink': '#ffb6c1',
+			\ 'lightpink': '#ffb6c1',
+			\ 'pale violet red': '#db7093',
+			\ 'palevioletred': '#db7093',
+			\ 'maroon': '#b03060',
+			\ 'x11 maroon': '#b03060',
+			\ 'x11maroon': '#b03060',
+			\ 'web maroon': '#800000',
+			\ 'webmaroon': '#800000',
+			\ 'medium violet red': '#c71585',
+			\ 'mediumvioletred': '#c71585',
+			\ 'violet red': '#d02090',
+			\ 'violetred': '#d02090',
+			\ 'magenta': '#ff00ff',
+			\ 'fuchsia': '#ff00ff',
+			\ 'violet': '#ee82ee',
+			\ 'plum': '#dda0dd',
+			\ 'orchid': '#da70d6',
+			\ 'medium orchid': '#ba55d3',
+			\ 'mediumorchid': '#ba55d3',
+			\ 'dark orchid': '#9932cc',
+			\ 'darkorchid': '#9932cc',
+			\ 'dark violet': '#9400d3',
+			\ 'darkviolet': '#9400d3',
+			\ 'blue violet': '#8a2be2',
+			\ 'blueviolet': '#8a2be2',
+			\ 'purple': '#a020f0',
+			\ 'x11 purple': '#a020f0',
+			\ 'x11purple': '#a020f0',
+			\ 'web purple': '#800080',
+			\ 'webpurple': '#800080',
+			\ 'medium purple': '#9370db',
+			\ 'mediumpurple': '#9370db',
+			\ 'thistle': '#d8bfd8',
+			\ 'snow1': '#fffafa',
+			\ 'snow2': '#eee9e9',
+			\ 'snow3': '#cdc9c9',
+			\ 'snow4': '#8b8989',
+			\ 'seashell1': '#fff5ee',
+			\ 'seashell2': '#eee5de',
+			\ 'seashell3': '#cdc5bf',
+			\ 'seashell4': '#8b8682',
+			\ 'antiquewhite1': '#ffefdb',
+			\ 'antiquewhite2': '#eedfcc',
+			\ 'antiquewhite3': '#cdc0b0',
+			\ 'antiquewhite4': '#8b8378',
+			\ 'bisque1': '#ffe4c4',
+			\ 'bisque2': '#eed5b7',
+			\ 'bisque3': '#cdb79e',
+			\ 'bisque4': '#8b7d6b',
+			\ 'peachpuff1': '#ffdab9',
+			\ 'peachpuff2': '#eecbad',
+			\ 'peachpuff3': '#cdaf95',
+			\ 'peachpuff4': '#8b7765',
+			\ 'navajowhite1': '#ffdead',
+			\ 'navajowhite2': '#eecfa1',
+			\ 'navajowhite3': '#cdb38b',
+			\ 'navajowhite4': '#8b795e',
+			\ 'lemonchiffon1': '#fffacd',
+			\ 'lemonchiffon2': '#eee9bf',
+			\ 'lemonchiffon3': '#cdc9a5',
+			\ 'lemonchiffon4': '#8b8970',
+			\ 'cornsilk1': '#fff8dc',
+			\ 'cornsilk2': '#eee8cd',
+			\ 'cornsilk3': '#cdc8b1',
+			\ 'cornsilk4': '#8b8878',
+			\ 'ivory1': '#fffff0',
+			\ 'ivory2': '#eeeee0',
+			\ 'ivory3': '#cdcdc1',
+			\ 'ivory4': '#8b8b83',
+			\ 'honeydew1': '#f0fff0',
+			\ 'honeydew2': '#e0eee0',
+			\ 'honeydew3': '#c1cdc1',
+			\ 'honeydew4': '#838b83',
+			\ 'lavenderblush1': '#fff0f5',
+			\ 'lavenderblush2': '#eee0e5',
+			\ 'lavenderblush3': '#cdc1c5',
+			\ 'lavenderblush4': '#8b8386',
+			\ 'mistyrose1': '#ffe4e1',
+			\ 'mistyrose2': '#eed5d2',
+			\ 'mistyrose3': '#cdb7b5',
+			\ 'mistyrose4': '#8b7d7b',
+			\ 'azure1': '#f0ffff',
+			\ 'azure2': '#e0eeee',
+			\ 'azure3': '#c1cdcd',
+			\ 'azure4': '#838b8b',
+			\ 'slateblue1': '#836fff',
+			\ 'slateblue2': '#7a67ee',
+			\ 'slateblue3': '#6959cd',
+			\ 'slateblue4': '#473c8b',
+			\ 'royalblue1': '#4876ff',
+			\ 'royalblue2': '#436eee',
+			\ 'royalblue3': '#3a5fcd',
+			\ 'royalblue4': '#27408b',
+			\ 'blue1': '#0000ff',
+			\ 'blue2': '#0000ee',
+			\ 'blue3': '#0000cd',
+			\ 'blue4': '#00008b',
+			\ 'dodgerblue1': '#1e90ff',
+			\ 'dodgerblue2': '#1c86ee',
+			\ 'dodgerblue3': '#1874cd',
+			\ 'dodgerblue4': '#104e8b',
+			\ 'steelblue1': '#63b8ff',
+			\ 'steelblue2': '#5cacee',
+			\ 'steelblue3': '#4f94cd',
+			\ 'steelblue4': '#36648b',
+			\ 'deepskyblue1': '#00bfff',
+			\ 'deepskyblue2': '#00b2ee',
+			\ 'deepskyblue3': '#009acd',
+			\ 'deepskyblue4': '#00688b',
+			\ 'skyblue1': '#87ceff',
+			\ 'skyblue2': '#7ec0ee',
+			\ 'skyblue3': '#6ca6cd',
+			\ 'skyblue4': '#4a708b',
+			\ 'lightskyblue1': '#b0e2ff',
+			\ 'lightskyblue2': '#a4d3ee',
+			\ 'lightskyblue3': '#8db6cd',
+			\ 'lightskyblue4': '#607b8b',
+			\ 'slategray1': '#c6e2ff',
+			\ 'slategray2': '#b9d3ee',
+			\ 'slategray3': '#9fb6cd',
+			\ 'slategray4': '#6c7b8b',
+			\ 'lightsteelblue1': '#cae1ff',
+			\ 'lightsteelblue2': '#bcd2ee',
+			\ 'lightsteelblue3': '#a2b5cd',
+			\ 'lightsteelblue4': '#6e7b8b',
+			\ 'lightblue1': '#bfefff',
+			\ 'lightblue2': '#b2dfee',
+			\ 'lightblue3': '#9ac0cd',
+			\ 'lightblue4': '#68838b',
+			\ 'lightcyan1': '#e0ffff',
+			\ 'lightcyan2': '#d1eeee',
+			\ 'lightcyan3': '#b4cdcd',
+			\ 'lightcyan4': '#7a8b8b',
+			\ 'paleturquoise1': '#bbffff',
+			\ 'paleturquoise2': '#aeeeee',
+			\ 'paleturquoise3': '#96cdcd',
+			\ 'paleturquoise4': '#668b8b',
+			\ 'cadetblue1': '#98f5ff',
+			\ 'cadetblue2': '#8ee5ee',
+			\ 'cadetblue3': '#7ac5cd',
+			\ 'cadetblue4': '#53868b',
+			\ 'turquoise1': '#00f5ff',
+			\ 'turquoise2': '#00e5ee',
+			\ 'turquoise3': '#00c5cd',
+			\ 'turquoise4': '#00868b',
+			\ 'cyan1': '#00ffff',
+			\ 'cyan2': '#00eeee',
+			\ 'cyan3': '#00cdcd',
+			\ 'cyan4': '#008b8b',
+			\ 'darkslategray1': '#97ffff',
+			\ 'darkslategray2': '#8deeee',
+			\ 'darkslategray3': '#79cdcd',
+			\ 'darkslategray4': '#528b8b',
+			\ 'aquamarine1': '#7fffd4',
+			\ 'aquamarine2': '#76eec6',
+			\ 'aquamarine3': '#66cdaa',
+			\ 'aquamarine4': '#458b74',
+			\ 'darkseagreen1': '#c1ffc1',
+			\ 'darkseagreen2': '#b4eeb4',
+			\ 'darkseagreen3': '#9bcd9b',
+			\ 'darkseagreen4': '#698b69',
+			\ 'seagreen1': '#54ff9f',
+			\ 'seagreen2': '#4eee94',
+			\ 'seagreen3': '#43cd80',
+			\ 'seagreen4': '#2e8b57',
+			\ 'palegreen1': '#9aff9a',
+			\ 'palegreen2': '#90ee90',
+			\ 'palegreen3': '#7ccd7c',
+			\ 'palegreen4': '#548b54',
+			\ 'springgreen1': '#00ff7f',
+			\ 'springgreen2': '#00ee76',
+			\ 'springgreen3': '#00cd66',
+			\ 'springgreen4': '#008b45',
+			\ 'green1': '#00ff00',
+			\ 'green2': '#00ee00',
+			\ 'green3': '#00cd00',
+			\ 'green4': '#008b00',
+			\ 'chartreuse1': '#7fff00',
+			\ 'chartreuse2': '#76ee00',
+			\ 'chartreuse3': '#66cd00',
+			\ 'chartreuse4': '#458b00',
+			\ 'olivedrab1': '#c0ff3e',
+			\ 'olivedrab2': '#b3ee3a',
+			\ 'olivedrab3': '#9acd32',
+			\ 'olivedrab4': '#698b22',
+			\ 'darkolivegreen1': '#caff70',
+			\ 'darkolivegreen2': '#bcee68',
+			\ 'darkolivegreen3': '#a2cd5a',
+			\ 'darkolivegreen4': '#6e8b3d',
+			\ 'khaki1': '#fff68f',
+			\ 'khaki2': '#eee685',
+			\ 'khaki3': '#cdc673',
+			\ 'khaki4': '#8b864e',
+			\ 'lightgoldenrod1': '#ffec8b',
+			\ 'lightgoldenrod2': '#eedc82',
+			\ 'lightgoldenrod3': '#cdbe70',
+			\ 'lightgoldenrod4': '#8b814c',
+			\ 'lightyellow1': '#ffffe0',
+			\ 'lightyellow2': '#eeeed1',
+			\ 'lightyellow3': '#cdcdb4',
+			\ 'lightyellow4': '#8b8b7a',
+			\ 'yellow1': '#ffff00',
+			\ 'yellow2': '#eeee00',
+			\ 'yellow3': '#cdcd00',
+			\ 'yellow4': '#8b8b00',
+			\ 'dark yellow': '#8b8b00',
+			\ 'darkyellow': '#8b8b00',
+			\ 'gold1': '#ffd700',
+			\ 'gold2': '#eec900',
+			\ 'gold3': '#cdad00',
+			\ 'gold4': '#8b7500',
+			\ 'goldenrod1': '#ffc125',
+			\ 'goldenrod2': '#eeb422',
+			\ 'goldenrod3': '#cd9b1d',
+			\ 'goldenrod4': '#8b6914',
+			\ 'darkgoldenrod1': '#ffb90f',
+			\ 'darkgoldenrod2': '#eead0e',
+			\ 'darkgoldenrod3': '#cd950c',
+			\ 'darkgoldenrod4': '#8b6508',
+			\ 'rosybrown1': '#ffc1c1',
+			\ 'rosybrown2': '#eeb4b4',
+			\ 'rosybrown3': '#cd9b9b',
+			\ 'rosybrown4': '#8b6969',
+			\ 'indianred1': '#ff6a6a',
+			\ 'indianred2': '#ee6363',
+			\ 'indianred3': '#cd5555',
+			\ 'indianred4': '#8b3a3a',
+			\ 'sienna1': '#ff8247',
+			\ 'sienna2': '#ee7942',
+			\ 'sienna3': '#cd6839',
+			\ 'sienna4': '#8b4726',
+			\ 'burlywood1': '#ffd39b',
+			\ 'burlywood2': '#eec591',
+			\ 'burlywood3': '#cdaa7d',
+			\ 'burlywood4': '#8b7355',
+			\ 'wheat1': '#ffe7ba',
+			\ 'wheat2': '#eed8ae',
+			\ 'wheat3': '#cdba96',
+			\ 'wheat4': '#8b7e66',
+			\ 'tan1': '#ffa54f',
+			\ 'tan2': '#ee9a49',
+			\ 'tan3': '#cd853f',
+			\ 'tan4': '#8b5a2b',
+			\ 'chocolate1': '#ff7f24',
+			\ 'chocolate2': '#ee7621',
+			\ 'chocolate3': '#cd661d',
+			\ 'chocolate4': '#8b4513',
+			\ 'firebrick1': '#ff3030',
+			\ 'firebrick2': '#ee2c2c',
+			\ 'firebrick3': '#cd2626',
+			\ 'firebrick4': '#8b1a1a',
+			\ 'brown1': '#ff4040',
+			\ 'brown2': '#ee3b3b',
+			\ 'brown3': '#cd3333',
+			\ 'brown4': '#8b2323',
+			\ 'salmon1': '#ff8c69',
+			\ 'salmon2': '#ee8262',
+			\ 'salmon3': '#cd7054',
+			\ 'salmon4': '#8b4c39',
+			\ 'lightsalmon1': '#ffa07a',
+			\ 'lightsalmon2': '#ee9572',
+			\ 'lightsalmon3': '#cd8162',
+			\ 'lightsalmon4': '#8b5742',
+			\ 'orange1': '#ffa500',
+			\ 'orange2': '#ee9a00',
+			\ 'orange3': '#cd8500',
+			\ 'orange4': '#8b5a00',
+			\ 'darkorange1': '#ff7f00',
+			\ 'darkorange2': '#ee7600',
+			\ 'darkorange3': '#cd6600',
+			\ 'darkorange4': '#8b4500',
+			\ 'coral1': '#ff7256',
+			\ 'coral2': '#ee6a50',
+			\ 'coral3': '#cd5b45',
+			\ 'coral4': '#8b3e2f',
+			\ 'tomato1': '#ff6347',
+			\ 'tomato2': '#ee5c42',
+			\ 'tomato3': '#cd4f39',
+			\ 'tomato4': '#8b3626',
+			\ 'orangered1': '#ff4500',
+			\ 'orangered2': '#ee4000',
+			\ 'orangered3': '#cd3700',
+			\ 'orangered4': '#8b2500',
+			\ 'light red': '#ff8b8b',
+			\ 'lightred': '#ff8b8b',
+			\ 'red1': '#ff0000',
+			\ 'red2': '#ee0000',
+			\ 'red3': '#cd0000',
+			\ 'red4': '#8b0000',
+			\ 'deeppink1': '#ff1493',
+			\ 'deeppink2': '#ee1289',
+			\ 'deeppink3': '#cd1076',
+			\ 'deeppink4': '#8b0a50',
+			\ 'hotpink1': '#ff6eb4',
+			\ 'hotpink2': '#ee6aa7',
+			\ 'hotpink3': '#cd6090',
+			\ 'hotpink4': '#8b3a62',
+			\ 'pink1': '#ffb5c5',
+			\ 'pink2': '#eea9b8',
+			\ 'pink3': '#cd919e',
+			\ 'pink4': '#8b636c',
+			\ 'lightpink1': '#ffaeb9',
+			\ 'lightpink2': '#eea2ad',
+			\ 'lightpink3': '#cd8c95',
+			\ 'lightpink4': '#8b5f65',
+			\ 'palevioletred1': '#ff82ab',
+			\ 'palevioletred2': '#ee799f',
+			\ 'palevioletred3': '#cd6889',
+			\ 'palevioletred4': '#8b475d',
+			\ 'maroon1': '#ff34b3',
+			\ 'maroon2': '#ee30a7',
+			\ 'maroon3': '#cd2990',
+			\ 'maroon4': '#8b1c62',
+			\ 'violetred1': '#ff3e96',
+			\ 'violetred2': '#ee3a8c',
+			\ 'violetred3': '#cd3278',
+			\ 'violetred4': '#8b2252',
+			\ 'light magenta': '#ff8bff',
+			\ 'lightmagenta': '#ff8bff',
+			\ 'magenta1': '#ff00ff',
+			\ 'magenta2': '#ee00ee',
+			\ 'magenta3': '#cd00cd',
+			\ 'magenta4': '#8b008b',
+			\ 'orchid1': '#ff83fa',
+			\ 'orchid2': '#ee7ae9',
+			\ 'orchid3': '#cd69c9',
+			\ 'orchid4': '#8b4789',
+			\ 'plum1': '#ffbbff',
+			\ 'plum2': '#eeaeee',
+			\ 'plum3': '#cd96cd',
+			\ 'plum4': '#8b668b',
+			\ 'mediumorchid1': '#e066ff',
+			\ 'mediumorchid2': '#d15fee',
+			\ 'mediumorchid3': '#b452cd',
+			\ 'mediumorchid4': '#7a378b',
+			\ 'darkorchid1': '#bf3eff',
+			\ 'darkorchid2': '#b23aee',
+			\ 'darkorchid3': '#9a32cd',
+			\ 'darkorchid4': '#68228b',
+			\ 'purple1': '#9b30ff',
+			\ 'purple2': '#912cee',
+			\ 'purple3': '#7d26cd',
+			\ 'purple4': '#551a8b',
+			\ 'mediumpurple1': '#ab82ff',
+			\ 'mediumpurple2': '#9f79ee',
+			\ 'mediumpurple3': '#8968cd',
+			\ 'mediumpurple4': '#5d478b',
+			\ 'thistle1': '#ffe1ff',
+			\ 'thistle2': '#eed2ee',
+			\ 'thistle3': '#cdb5cd',
+			\ 'thistle4': '#8b7b8b',
+			\ 'gray0': '#000000',
+			\ 'grey0': '#000000',
+			\ 'gray1': '#030303',
+			\ 'grey1': '#030303',
+			\ 'gray2': '#050505',
+			\ 'grey2': '#050505',
+			\ 'gray3': '#080808',
+			\ 'grey3': '#080808',
+			\ 'gray4': '#0a0a0a',
+			\ 'grey4': '#0a0a0a',
+			\ 'gray5': '#0d0d0d',
+			\ 'grey5': '#0d0d0d',
+			\ 'gray6': '#0f0f0f',
+			\ 'grey6': '#0f0f0f',
+			\ 'gray7': '#121212',
+			\ 'grey7': '#121212',
+			\ 'gray8': '#141414',
+			\ 'grey8': '#141414',
+			\ 'gray9': '#171717',
+			\ 'grey9': '#171717',
+			\ 'gray10': '#1a1a1a',
+			\ 'grey10': '#1a1a1a',
+			\ 'gray11': '#1c1c1c',
+			\ 'grey11': '#1c1c1c',
+			\ 'gray12': '#1f1f1f',
+			\ 'grey12': '#1f1f1f',
+			\ 'gray13': '#212121',
+			\ 'grey13': '#212121',
+			\ 'gray14': '#242424',
+			\ 'grey14': '#242424',
+			\ 'gray15': '#262626',
+			\ 'grey15': '#262626',
+			\ 'gray16': '#292929',
+			\ 'grey16': '#292929',
+			\ 'gray17': '#2b2b2b',
+			\ 'grey17': '#2b2b2b',
+			\ 'gray18': '#2e2e2e',
+			\ 'grey18': '#2e2e2e',
+			\ 'gray19': '#303030',
+			\ 'grey19': '#303030',
+			\ 'gray20': '#333333',
+			\ 'grey20': '#333333',
+			\ 'gray21': '#363636',
+			\ 'grey21': '#363636',
+			\ 'gray22': '#383838',
+			\ 'grey22': '#383838',
+			\ 'gray23': '#3b3b3b',
+			\ 'grey23': '#3b3b3b',
+			\ 'gray24': '#3d3d3d',
+			\ 'grey24': '#3d3d3d',
+			\ 'gray25': '#404040',
+			\ 'grey25': '#404040',
+			\ 'gray26': '#424242',
+			\ 'grey26': '#424242',
+			\ 'gray27': '#454545',
+			\ 'grey27': '#454545',
+			\ 'gray28': '#474747',
+			\ 'grey28': '#474747',
+			\ 'gray29': '#4a4a4a',
+			\ 'grey29': '#4a4a4a',
+			\ 'gray30': '#4d4d4d',
+			\ 'grey30': '#4d4d4d',
+			\ 'gray31': '#4f4f4f',
+			\ 'grey31': '#4f4f4f',
+			\ 'gray32': '#525252',
+			\ 'grey32': '#525252',
+			\ 'gray33': '#545454',
+			\ 'grey33': '#545454',
+			\ 'gray34': '#575757',
+			\ 'grey34': '#575757',
+			\ 'gray35': '#595959',
+			\ 'grey35': '#595959',
+			\ 'gray36': '#5c5c5c',
+			\ 'grey36': '#5c5c5c',
+			\ 'gray37': '#5e5e5e',
+			\ 'grey37': '#5e5e5e',
+			\ 'gray38': '#616161',
+			\ 'grey38': '#616161',
+			\ 'gray39': '#636363',
+			\ 'grey39': '#636363',
+			\ 'gray40': '#666666',
+			\ 'grey40': '#666666',
+			\ 'gray41': '#696969',
+			\ 'grey41': '#696969',
+			\ 'gray42': '#6b6b6b',
+			\ 'grey42': '#6b6b6b',
+			\ 'gray43': '#6e6e6e',
+			\ 'grey43': '#6e6e6e',
+			\ 'gray44': '#707070',
+			\ 'grey44': '#707070',
+			\ 'gray45': '#737373',
+			\ 'grey45': '#737373',
+			\ 'gray46': '#757575',
+			\ 'grey46': '#757575',
+			\ 'gray47': '#787878',
+			\ 'grey47': '#787878',
+			\ 'gray48': '#7a7a7a',
+			\ 'grey48': '#7a7a7a',
+			\ 'gray49': '#7d7d7d',
+			\ 'grey49': '#7d7d7d',
+			\ 'gray50': '#7f7f7f',
+			\ 'grey50': '#7f7f7f',
+			\ 'gray51': '#828282',
+			\ 'grey51': '#828282',
+			\ 'gray52': '#858585',
+			\ 'grey52': '#858585',
+			\ 'gray53': '#878787',
+			\ 'grey53': '#878787',
+			\ 'gray54': '#8a8a8a',
+			\ 'grey54': '#8a8a8a',
+			\ 'gray55': '#8c8c8c',
+			\ 'grey55': '#8c8c8c',
+			\ 'gray56': '#8f8f8f',
+			\ 'grey56': '#8f8f8f',
+			\ 'gray57': '#919191',
+			\ 'grey57': '#919191',
+			\ 'gray58': '#949494',
+			\ 'grey58': '#949494',
+			\ 'gray59': '#969696',
+			\ 'grey59': '#969696',
+			\ 'gray60': '#999999',
+			\ 'grey60': '#999999',
+			\ 'gray61': '#9c9c9c',
+			\ 'grey61': '#9c9c9c',
+			\ 'gray62': '#9e9e9e',
+			\ 'grey62': '#9e9e9e',
+			\ 'gray63': '#a1a1a1',
+			\ 'grey63': '#a1a1a1',
+			\ 'gray64': '#a3a3a3',
+			\ 'grey64': '#a3a3a3',
+			\ 'gray65': '#a6a6a6',
+			\ 'grey65': '#a6a6a6',
+			\ 'gray66': '#a8a8a8',
+			\ 'grey66': '#a8a8a8',
+			\ 'gray67': '#ababab',
+			\ 'grey67': '#ababab',
+			\ 'gray68': '#adadad',
+			\ 'grey68': '#adadad',
+			\ 'gray69': '#b0b0b0',
+			\ 'grey69': '#b0b0b0',
+			\ 'gray70': '#b3b3b3',
+			\ 'grey70': '#b3b3b3',
+			\ 'gray71': '#b5b5b5',
+			\ 'grey71': '#b5b5b5',
+			\ 'gray72': '#b8b8b8',
+			\ 'grey72': '#b8b8b8',
+			\ 'gray73': '#bababa',
+			\ 'grey73': '#bababa',
+			\ 'gray74': '#bdbdbd',
+			\ 'grey74': '#bdbdbd',
+			\ 'gray75': '#bfbfbf',
+			\ 'grey75': '#bfbfbf',
+			\ 'gray76': '#c2c2c2',
+			\ 'grey76': '#c2c2c2',
+			\ 'gray77': '#c4c4c4',
+			\ 'grey77': '#c4c4c4',
+			\ 'gray78': '#c7c7c7',
+			\ 'grey78': '#c7c7c7',
+			\ 'gray79': '#c9c9c9',
+			\ 'grey79': '#c9c9c9',
+			\ 'gray80': '#cccccc',
+			\ 'grey80': '#cccccc',
+			\ 'gray81': '#cfcfcf',
+			\ 'grey81': '#cfcfcf',
+			\ 'gray82': '#d1d1d1',
+			\ 'grey82': '#d1d1d1',
+			\ 'gray83': '#d4d4d4',
+			\ 'grey83': '#d4d4d4',
+			\ 'gray84': '#d6d6d6',
+			\ 'grey84': '#d6d6d6',
+			\ 'gray85': '#d9d9d9',
+			\ 'grey85': '#d9d9d9',
+			\ 'gray86': '#dbdbdb',
+			\ 'grey86': '#dbdbdb',
+			\ 'gray87': '#dedede',
+			\ 'grey87': '#dedede',
+			\ 'gray88': '#e0e0e0',
+			\ 'grey88': '#e0e0e0',
+			\ 'gray89': '#e3e3e3',
+			\ 'grey89': '#e3e3e3',
+			\ 'gray90': '#e5e5e5',
+			\ 'grey90': '#e5e5e5',
+			\ 'gray91': '#e8e8e8',
+			\ 'grey91': '#e8e8e8',
+			\ 'gray92': '#ebebeb',
+			\ 'grey92': '#ebebeb',
+			\ 'gray93': '#ededed',
+			\ 'grey93': '#ededed',
+			\ 'gray94': '#f0f0f0',
+			\ 'grey94': '#f0f0f0',
+			\ 'gray95': '#f2f2f2',
+			\ 'grey95': '#f2f2f2',
+			\ 'gray96': '#f5f5f5',
+			\ 'grey96': '#f5f5f5',
+			\ 'gray97': '#f7f7f7',
+			\ 'grey97': '#f7f7f7',
+			\ 'gray98': '#fafafa',
+			\ 'grey98': '#fafafa',
+			\ 'gray99': '#fcfcfc',
+			\ 'grey99': '#fcfcfc',
+			\ 'gray100': '#ffffff',
+			\ 'grey100': '#ffffff',
+			\ 'dark grey': '#a9a9a9',
+			\ 'darkgrey': '#a9a9a9',
+			\ 'dark gray': '#a9a9a9',
+			\ 'darkgray': '#a9a9a9',
+			\ 'dark blue': '#00008b',
+			\ 'darkblue': '#00008b',
+			\ 'dark cyan': '#008b8b',
+			\ 'darkcyan': '#008b8b',
+			\ 'dark magenta': '#8b008b',
+			\ 'darkmagenta': '#8b008b',
+			\ 'dark red': '#8b0000',
+			\ 'darkred': '#8b0000',
+			\ 'light green': '#90ee90',
+			\ 'lightgreen': '#90ee90',
+			\ 'crimson': '#dc143c',
+			\ 'indigo': '#4b0082',
+			\ 'olive': '#808000',
+			\ 'rebecca purple': '#663399',
+			\ 'rebeccapurple': '#663399',
+			\ 'silver': '#c0c0c0',
+			\ 'teal': '#008080'
+			\ }, 'keep')
+
+let &cpo= s:keepcpo
+unlet s:keepcpo
+
+"vim: sw=4

runtime/colors/tools/check_colors.vim

@@ -226,7 +226,13 @@ fu! Result(err)
   endif
 endfu
 
-call Test_check_colors()
-
-let &cpo = s:save_cpo
-unlet s:save_cpo
+try
+  call Test_check_colors()
+catch
+  echohl ErrorMsg
+  echomsg v:exception
+  echohl NONE
+finally
+  let &cpo = s:save_cpo
+  unlet s:save_cpo
+endtry

runtime/compiler/fpc.vim

@@ -12,6 +12,6 @@ if exists(":CompilerSet") != 2		" older Vim always used :setlocal
   command -nargs=* CompilerSet setlocal <args>
 endif
 
-" NOTE: compiler must be runned with -vb to write whole source path, not only file
+" NOTE: compiler must be run with -vb to write whole source path, not only file
 " name.
 CompilerSet errorformat=%f(%l\\,%c)\ %m

runtime/compiler/jest.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
 " Compiler:	Jest
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2018 May 15
+" Last Change:	2021 Nov 20
 
 if exists("current_compiler")
   finish
@@ -15,12 +15,14 @@ endif
 let s:cpo_save = &cpo
 set cpo&vim
 
-" CompilerSet makeprg=npx\ jest\ --no-colors
+" CompilerSet makeprg=npx\ --no-install\ jest\ --no-colors
 
 CompilerSet makeprg=jest\ --no-colors
-CompilerSet errorformat=%E\ \ ●\ %m,
+CompilerSet errorformat=%-A\ \ ●\ Console,
+		       \%E\ \ ●\ %m,
 		       \%Z\ %\\{4}%.%#Error:\ %f:\ %m\ (%l:%c):%\\=,
 		       \%Z\ %\\{6}at\ %\\S%#\ (%f:%l:%c),
+		       \%Z\ %\\{6}at\ %\\S%#\ %f:%l:%c,
 		       \%+C\ %\\{4}%\\w%.%#,
 		       \%+C\ %\\{4}%[-+]%.%#,
 		       \%-C%.%#,

runtime/compiler/scdoc.vim

@@ -0,0 +1,16 @@
+" scdoc compiler for Vim
+" Compiler: scdoc
+" Maintainer: Greg Anders <greg@gpanders.com>
+" Last Updated: 2019-10-24
+
+if exists('current_compiler')
+    finish
+endif
+let current_compiler = 'scdoc'
+
+if exists(':CompilerSet') != 2
+    command -nargs=* CompilerSet setlocal <args>
+endif
+
+CompilerSet makeprg=scdoc\ <\ %\ 2>&1
+CompilerSet errorformat=Error\ at\ %l:%c:\ %m,%-G%.%#

runtime/compiler/sml.vim

@@ -1,7 +1,7 @@
 " Vim compiler file
 " Compiler:	SML/NJ Compiler
 " Maintainer:	Doug Kearns <dougkearns@gmail.com>
-" Last Change:	2020 Feb 10
+" Last Change:	2022 Feb 09
 
 if exists("current_compiler")
   finish
@@ -16,10 +16,10 @@ let s:cpo_save = &cpo
 set cpo&vim
 
 CompilerSet makeprg=sml
-CompilerSet errorformat=%f:%l.%c-%\\d%\\+.%\\d%\\+\ %trror:\ %m,
+CompilerSet errorformat=%f:%l.%c-%e.%k\ %trror:\ %m,
 		       \%f:%l.%c\ %trror:\ %m,
-		       \%trror:\ %m
-		       \%f:%l.%c-%\\d%\\+.%\\d%\\+\ %tarning:\ %m,
+		       \%trror:\ %m,
+		       \%f:%l.%c-%e.%k\ %tarning:\ %m,
 		       \%f:%l.%c\ %tarning:\ %m,
 		       \%tarning:\ %m,
 		       \%-G%.%#

runtime/compiler/spectral.vim

@@ -0,0 +1,17 @@
+" Vim compiler file
+" Compiler:    Spectral for YAML
+" Maintainer:  Romain Lafourcade <romainlafourcade@gmail.com>
+" Last Change: 2021 July 21
+
+if exists("current_compiler")
+    finish
+endif
+let current_compiler = "spectral"
+
+if exists(":CompilerSet") != 2
+    command -nargs=* CompilerSet setlocal <args>
+endif
+
+CompilerSet makeprg=spectral\ lint\ %\ -f\ text
+CompilerSet errorformat=%f:%l:%c\ %t%.%\\{-}\ %m
+

runtime/compiler/tex.vim

@@ -18,7 +18,7 @@ endif
 if exists('b:tex_ignore_makefile') || exists('g:tex_ignore_makefile') ||
 			\(!filereadable('Makefile') && !filereadable('makefile'))
 	" If buffer-local variable 'tex_flavor' exists, it defines TeX flavor,
-	" otherwize the same for global variable with same name, else it will be
+	" otherwise the same for global variable with same name, else it will be
 	" LaTeX
 	if exists("b:tex_flavor")
 		let current_compiler = b:tex_flavor

runtime/compiler/yamllint.vim

@@ -0,0 +1,16 @@
+" Vim compiler file
+" Compiler:    Yamllint for YAML
+" Maintainer:  Romain Lafourcade <romainlafourcade@gmail.com>
+" Last Change: 2021 July 21
+
+if exists("current_compiler")
+    finish
+endif
+let current_compiler = "yamllint"
+
+if exists(":CompilerSet") != 2
+    command -nargs=* CompilerSet setlocal <args>
+endif
+
+CompilerSet makeprg=yamllint\ -f\ parsable
+

runtime/defaults.vim

@@ -1,7 +1,7 @@
 " The default vimrc file.
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2020 Sep 30
+" Last change:	2022 Mar 03
 "
 " This is loaded if no vimrc file was found.
 " Except when Vim is run with "-u NONE" or "-C".
@@ -64,9 +64,10 @@ if has('win32')
   set guioptions-=t
 endif
 
-" Don't use Ex mode, use Q for formatting.
+" Don't use Q for Ex mode, use it for formatting.  Except for Select mode.
 " Revert with ":unmap Q".
 map Q gq
+sunmap Q
 
 " CTRL-U in insert mode deletes a lot.  Use CTRL-G u to first break undo,
 " so that you can undo CTRL-U after inserting a line break.
@@ -96,7 +97,7 @@ if 1
   filetype plugin indent on
 
   " Put these in an autocmd group, so that you can revert them with:
-  " ":augroup vimStartup | au! | augroup END"
+  " ":augroup vimStartup | exe 'au!' | augroup END"
   augroup vimStartup
     au!
 
@@ -111,6 +112,18 @@ if 1
 
   augroup END
 
+  " Quite a few people accidentally type "q:" instead of ":q" and get confused
+  " by the command line window.  Give a hint about how to get out.
+  " If you don't like this you can put this in your vimrc:
+  " ":augroup vimHints | exe 'au!' | augroup END"
+  augroup vimHints
+    au!
+    autocmd CmdwinEnter *
+	  \ echohl Todo | 
+	  \ echo 'You discovered the command-line window! You can close it with ":q".' |
+	  \ echohl None
+  augroup END
+
 endif
 
 " Switch syntax highlighting on when the terminal has colors or when using the

runtime/doc/Makefile

@@ -16,6 +16,7 @@ include ../../src/auto/config.mk
 DOCS = \
 	arabic.txt \
 	autocmd.txt \
+	builtin.txt \
 	change.txt \
 	channel.txt \
 	cmdline.txt \
@@ -152,6 +153,7 @@ DOCS = \
 	version6.txt \
 	version7.txt \
 	version8.txt \
+	version9.txt \
 	vi_diff.txt \
 	vim9.txt \
 	visual.txt \
@@ -161,6 +163,7 @@ DOCS = \
 HTMLS = \
 	arabic.html \
 	autocmd.html \
+	builtin.html \
 	change.html \
 	channel.html \
 	cmdline.html \
@@ -296,6 +299,7 @@ HTMLS = \
 	version6.html \
 	version7.html \
 	version8.html \
+	version9.html \
 	vi_diff.html \
 	vimindex.html \
 	vim9.html \

runtime/doc/arabic.txt

@@ -1,4 +1,4 @@
-*arabic.txt*	For Vim version 8.2.  Last change: 2019 May 05
+*arabic.txt*	For Vim version 8.2.  Last change: 2021 Jun 22
 
 
 		  VIM REFERENCE MANUAL	  by Nadim Shaikli
@@ -176,6 +176,13 @@ o  Enable Arabic settings [short-cut]
 	 and its support is preferred due to its level of offerings.
 	 'arabic' when 'termbidi' is enabled only sets the keymap.
 
+	 For vertical window isolation while setting 'termbidi' an LTR
+	 vertical separator like "l" or "𝖨" may be used.  It may also be
+	 hidden by changing its color to the foreground color: >
+		:set fillchars=vert:l
+		:hi VertSplit ctermbg=White
+<	Note that this is a workaround, not a proper solution.
+
    If, on the other hand, you'd like to be verbose and explicit and
    are opting not to use the 'arabic' short-cut command, here's what
    is needed (i.e. if you use ':set arabic' you can skip this section) -

runtime/doc/autocmd.txt

@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 8.2.  Last change: 2021 Apr 25
+*autocmd.txt*   For Vim version 8.2.  Last change: 2022 Apr 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -51,10 +51,10 @@ effects.  Be careful not to destroy your text.
 2. Defining autocommands				*autocmd-define*
 
 							*:au* *:autocmd*
-:au[tocmd] [group] {event} {pat} [++once] [++nested] {cmd}
+:au[tocmd] [group] {event} {aupat} [++once] [++nested] {cmd}
 			Add {cmd} to the list of commands that Vim will
 			execute automatically on {event} for a file matching
-			{pat} |autocmd-patterns|. 
+			{aupat} |autocmd-patterns|.
 			Here {event} cannot be "*".  *E1155*
 			Note: A quote character is seen as argument to the
 			:autocmd and won't start a comment.
@@ -63,7 +63,7 @@ effects.  Be careful not to destroy your text.
 			they were given.
 			See |autocmd-nested| for [++nested].  "nested"
 			(without the ++) can also be used, for backwards
-			compatibility.
+			compatibility, but not in |Vim9| script. *E1078*
 							*autocmd-once*
 			If [++once] is supplied the command is executed once,
 			then removed ("one shot").
@@ -76,8 +76,14 @@ and in a `:def` function) then {cmd} will be executed as in Vim9
 script.  Thus this depends on where the autocmd is defined, not where it is
 triggered.
 
+{cmd} can be a block, like with `:command`, see |:command-repl|.  Example: >
+	au BufReadPost *.xml {
+		  setlocal matchpairs+=<:>
+		  /<start
+		}
+
 Note: The ":autocmd" command can only be followed by another command when the
-'|' appears before {cmd}.  This works: >
+'|' appears where the pattern is expected.  This works: >
 	:augroup mine | au! BufRead | augroup END
 But this sees "augroup" as part of the defined command: >
 	:augroup mine | au! BufRead * | augroup END
@@ -139,19 +145,19 @@ prompt.  When one command outputs two messages this can happen anyway.
 ==============================================================================
 3. Removing autocommands				*autocmd-remove*
 
-:au[tocmd]! [group] {event} {pat} [++once] [++nested] {cmd}
+:au[tocmd]! [group] {event} {aupat} [++once] [++nested] {cmd}
 			Remove all autocommands associated with {event} and
-			{pat}, and add the command {cmd}.
+			{aupat}, and add the command {cmd}.
 			See |autocmd-once| for [++once].
 			See |autocmd-nested| for [++nested].
 
-:au[tocmd]! [group] {event} {pat}
+:au[tocmd]! [group] {event} {aupat}
 			Remove all autocommands associated with {event} and
-			{pat}.
+			{aupat}.
 
-:au[tocmd]! [group] * {pat}
-			Remove all autocommands associated with {pat} for all
-			events.
+:au[tocmd]! [group] * {aupat}
+			Remove all autocommands associated with {aupat} for
+			all events.
 
 :au[tocmd]! [group] {event}
 			Remove ALL autocommands for {event}.
@@ -171,12 +177,12 @@ with ":augroup"); otherwise, Vim uses the group defined with [group].
 ==============================================================================
 4. Listing autocommands					*autocmd-list*
 
-:au[tocmd] [group] {event} {pat}
+:au[tocmd] [group] {event} {aupat}
 			Show the autocommands associated with {event} and
-			{pat}.
+			{aupat}.
 
-:au[tocmd] [group] * {pat}
-			Show the autocommands associated with {pat} for all
+:au[tocmd] [group] * {aupat}
+			Show the autocommands associated with {aupat} for all
 			events.
 
 :au[tocmd] [group] {event}
@@ -320,6 +326,7 @@ Name			triggered by ~
 |FileChangedRO|		before making the first change to a read-only file
 
 |DiffUpdated|		after diffs have been updated
+|DirChangedPre|		before the working directory will change
 |DirChanged|		after the working directory has changed
 
 |ShellCmdPost|		after executing a shell command
@@ -342,6 +349,7 @@ Name			triggered by ~
 
 |WinNew|		after creating a new window
 |TabNew|		after creating a new tab page
+|WinClosed|		after closing a window
 |TabClosed|		after closing a tab page
 |WinEnter|		after entering another window
 |WinLeave|		before leaving a window
@@ -357,9 +365,12 @@ Name			triggered by ~
 |InsertEnter|		starting Insert mode
 |InsertChange|		when typing <Insert> while in Insert or Replace mode
 |InsertLeave|		when leaving Insert mode
+|InsertLeavePre| 	just before leaving Insert mode
 |InsertCharPre|		when a character was typed in Insert mode, before
 			inserting it
 
+|ModeChanged|		after changing the mode
+
 |TextChanged|		after a change was made to the text in Normal mode
 |TextChangedI|		after a change was made to the text in Insert mode
 			when popup menu is not visible
@@ -391,6 +402,8 @@ Name			triggered by ~
 |User|			to be used in combination with ":doautocmd"
 |SigUSR1|		after the SIGUSR1 signal has been detected
 
+|WinScrolled|		after scrolling or resizing a window
+
 
 The alphabetical list of autocommand events:		*autocmd-events-abc*
 
@@ -679,8 +692,11 @@ CursorHoldI			Just like CursorHold, but in Insert mode.
 CursorMoved			After the cursor was moved in Normal or Visual
 				mode.  Also when the text of the cursor line
 				has been changed, e.g., with "x", "rx" or "p".
-				Not triggered when there is typeahead or when
-				an operator is pending.
+				Not always triggered when there is typeahead,
+				while executing commands in a script file,
+				when an operator is pending or when moving to
+				another window while remaining at the same
+				cursor position.
 				For an example see |match-parens|.
 				Note: This can not be skipped with
 				`:noautocmd`.
@@ -697,7 +713,7 @@ EncodingChanged			Fires off after the 'encoding' option has been
 							*FileAppendCmd*
 FileAppendCmd			Before appending to a file.  Should do the
 				appending to the file.  Use the '[ and ']
-				marks for the range of lines.|Cmd-event|
+				marks for the range of lines. |Cmd-event|
 							*FileAppendPost*
 FileAppendPost			After appending to a file.
 							*FileAppendPre*
@@ -726,6 +742,11 @@ DiffUpdated			After diffs have been updated.  Depending on
 				what kind of diff is being used (internal or
 				external) this can be triggered on every
 				change or when doing |:diffupdate|.
+							*DirChangedPre*
+DirChangedPre			The working directory is going to be changed,
+				as with |DirChanged|.  The pattern is like
+				with |DirChanged|.  The new directory can be
+				found in v:event.directory.
 							*DirChanged*
 DirChanged			The working directory has changed in response
 				to the |:cd| or |:tcd| or |:lcd| commands, or
@@ -825,7 +846,7 @@ FilterReadPre			Before reading a file from a filter command.
 							*FilterWritePost*
 FilterWritePost			After writing a file for a filter command or
 				making a diff with an external diff (see
-				DiffUpdated for internal diff).
+				|DiffUpdated| for internal diff).
 				Vim checks the pattern against the name of
 				the current buffer as with FilterWritePre.
 				Not triggered when 'shelltemp' is off.
@@ -916,7 +937,27 @@ MenuPopup			Just before showing the popup menu (under the
 					i	Insert
 					c	Command line
 					tl	Terminal
-							*OptionSet*
+							*ModeChanged*
+ModeChanged			After changing the mode. The pattern is
+				matched against `'old_mode:new_mode'`, for
+				example match against `*:c*` to simulate
+				|CmdlineEnter|.
+				The following values of |v:event| are set:
+				   old_mode	The mode before it changed.
+				   new_mode	The new mode as also returned
+						by |mode()| called with a
+						non-zero argument.
+				When ModeChanged is triggered, old_mode will
+				have the value of new_mode when the event was
+				last triggered.
+				This will be triggered on every minor mode
+				change.
+				Usage example to use relative line numbers
+				when entering Visual mode: >
+	:au ModeChanged [vV\x16]*:* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au ModeChanged *:[vV\x16]* let &l:rnu = mode() =~# '^[vV\x16]'
+	:au WinEnter,WinLeave * let &l:rnu = mode() =~# '^[vV\x16]'
+<							*OptionSet*
 OptionSet			After setting an option.  The pattern is
 				matched against the long option name.
 				|<amatch>| indicates what option has been set.
@@ -985,9 +1026,10 @@ QuickFixCmdPost			Like QuickFixCmdPre, but after a quickfix
 							*QuitPre*
 QuitPre				When using `:quit`, `:wq` or `:qall`, before
 				deciding whether it closes the current window
-				or quits Vim.  Can be used to close any
-				non-essential window if the current window is
-				the last ordinary window.
+				or quits Vim.  For `:wq` the buffer is written
+				before QuitPre is triggered.  Can be used to
+				close any non-essential window if the current
+				window is the last ordinary window.
 				Also see |ExitPre|.
 							*RemoteReply*
 RemoteReply			When a reply from a Vim that functions as
@@ -1163,14 +1205,17 @@ TextYankPost			After text has been yanked or deleted in the
 				current buffer.  The following values of
 				|v:event| can be used to determine the operation
 				that triggered this autocmd:
+				   inclusive	TRUE if the motion is
+						|inclusive| else the motion is
+						|exclusive|.
 				   operator	The operation performed.
 				   regcontents	Text that was stored in the
 						register, as a list of lines,
 						like with: >
 						getreg(r, 1, 1)
-<				   regname	Name of the |register| or
-						empty string for the unnamed
-						register.
+<				   regname	Name of the register or empty
+						string for the unnamed
+						register, see |registers|.
 				   regtype	Type of the register, see
 						|getregtype()|.
 				   visual	True if the operation is
@@ -1178,7 +1223,7 @@ TextYankPost			After text has been yanked or deleted in the
 				Not triggered when |quote_| is used nor when
 				called recursively.
 				It is not allowed to change the buffer text,
-				see |textlock|.
+				see |textlock|. *E1064*
 				{only when compiled with the +eval feature}
 
 							*User*
@@ -1188,7 +1233,13 @@ User				Never executed automatically.  To be used for
 				Note that when `:doautocmd User MyEvent` is
 				used while there are no matching autocommands,
 				you will get an error.  If you don't want
-				that, define a dummy autocommand yourself.
+				that, either check whether an autocommand is
+				defined using `exists('#User#MyEvent')` or
+				define a dummy autocommand yourself.
+				Example: >
+				    if exists('#User#MyEvent')
+					doautocmd User MyEvent
+				    endif
 
 							*SigUSR1*
 SigUSR1				After the SIGUSR1 signal has been detected.
@@ -1246,8 +1297,14 @@ VimResume			When the Vim instance is resumed after being
 	:autocmd VimResume * checktime
 <							*VimSuspend*
 VimSuspend			When the Vim instance is suspended.  Only when
-				CTRL-Z was typed inside Vim, not when the
-				SIGSTOP or SIGTSTP signal was sent to Vim.
+				CTRL-Z was typed inside Vim, or when the SIGTSTP
+				signal was sent to Vim, but not for SIGSTOP.
+							*WinClosed*
+WinClosed			After closing a window.  The pattern is
+				matched against the |window-ID|.  Both
+				<amatch> and <afile> are set to the
+				|window-ID|.  Non-recursive (event cannot
+				trigger itself).
 							*WinEnter*
 WinEnter			After entering another window.  Not done for
 				the first window, when Vim has just started.
@@ -1271,17 +1328,30 @@ WinNew				When a new window was created.  Not done for
 				the first window, when Vim has just started.
 				Before a WinEnter event.
 
-==============================================================================
-6. Patterns					*autocmd-patterns* *{pat}*
+							*WinScrolled*
+WinScrolled			After scrolling the content of a window or
+				resizing a window.
+				The pattern is matched against the
+				|window-ID|.  Both <amatch> and <afile> are
+				set to the |window-ID|.
+				Non-recursive (the event cannot trigger
+				itself).  However, if the command causes the
+				window to scroll or change size another
+				WinScrolled event will be triggered later.
+				Does not trigger when the command is added,
+				only after the first scroll or resize.
 
-The {pat} argument can be a comma separated list.  This works as if the
-command was given with each pattern separately.  Thus this command: >
+==============================================================================
+6. Patterns					*autocmd-patterns* *{aupat}*
+
+The {aupat} argument of `:autocmd` can be a comma-separated list.  This works as
+if the command was given with each pattern separately.  Thus this command: >
 	:autocmd BufRead *.txt,*.info set et
 Is equivalent to: >
 	:autocmd BufRead *.txt set et
 	:autocmd BufRead *.info set et
 
-The file pattern {pat} is tested for a match against the file name in one of
+The file pattern {aupat} is tested for a match against the file name in one of
 two ways:
 1. When there is no '/' in the pattern, Vim checks for a match against only
    the tail part of the file name (without its leading directory path).
@@ -1475,6 +1545,13 @@ Example: >
 This prevents having the autocommands defined twice (e.g., after sourcing the
 .vimrc file again).
 
+						*FileExplorer*
+There is one group that is recognized by Vim: FileExplorer.  If this group
+exists Vim assumes that editing a directory is possible and will trigger a
+plugin that lists the files in that directory.  This is used by the |netrw|
+plugin.  This allows you to do: >
+	browse edit
+
 ==============================================================================
 9. Executing autocommands				*autocmd-execute*
 
@@ -1587,7 +1664,7 @@ Examples for reading and writing compressed files: >
   :  autocmd BufReadPre,FileReadPre	*.gz set bin
   :  autocmd BufReadPost,FileReadPost	*.gz '[,']!gunzip
   :  autocmd BufReadPost,FileReadPost	*.gz set nobin
-  :  autocmd BufReadPost,FileReadPost	*.gz execute ":doautocmd BufReadPost " . expand("%:r")
+  :  autocmd BufReadPost,FileReadPost	*.gz execute ":doautocmd BufReadPost " .. expand("%:r")
   :  autocmd BufWritePost,FileWritePost	*.gz !mv <afile> <afile>:r
   :  autocmd BufWritePost,FileWritePost	*.gz !gzip <afile>:r
 
@@ -1686,7 +1763,7 @@ To insert the current date and time in a *.html file when writing it: >
   :  else
   :    let l = line("$")
   :  endif
-  :  exe "1," . l . "g/Last modified: /s/Last modified: .*/Last modified: " .
+  :  exe "1," .. l .. "g/Last modified: /s/Last modified: .*/Last modified: " ..
   :  \ strftime("%Y %b %d")
   :endfun
 

runtime/doc/change.txt

@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 8.2.  Last change: 2021 Mar 01
+*change.txt*    For Vim version 8.2.  Last change: 2022 Mar 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -259,6 +259,9 @@ Or use "caw" (see |aw|).
 			line.
 			Adding [!] toggles 'autoindent' for the time this
 			command is executed.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 ==============================================================================
 3. Simple changes					*simple-change*
@@ -775,17 +778,20 @@ matched pattern is deleted.  The separator after {pattern} can also be left
 out then.  Example: >
 	:%s/TESTING
 This deletes "TESTING" from all lines, but only one per line.
-
-For compatibility with Vi these two exceptions are allowed:
+								*E1270*
+For compatibility with Vi these two exceptions are allowed in legacy script:
 "\/{string}/" and "\?{string}?" do the same as "//{string}/r".
 "\&{string}&" does the same as "//{string}/".
-						*pattern-delimiter* *E146*
-Instead of the '/' which surrounds the pattern and replacement string, you
-can use any other single-byte character, but not an alphanumeric character,
-'\', '"' or '|'.  This is useful if you want to include a '/' in the search
-pattern or replacement string.  Example: >
+				*pattern-delimiter* *E146* *E1241* *E1242*
+Instead of the '/' which surrounds the pattern and replacement string, you can
+use another single-byte character.  This is useful if you want to include a
+'/' in the search pattern or replacement string.  Example: >
 	:s+/+//+
 
+You can use most characters, but not an alphanumeric character, '\', '"' or
+'|'.  In Vim9 script you should not use '#' because it may be recognized as
+the start of a comment.
+
 For the definition of a pattern, see |pattern|.  In Visual block mode, use
 |/\%V| in the pattern to have the substitute work in the block only.
 Otherwise it works on whole lines anyway.
@@ -940,7 +946,7 @@ Consider using a character like "@" or ":".  There is no problem if the result
 of the expression contains the separation character.
 
 Examples: >
-	:s@\n@\="\r" . expand("$HOME") . "\r"@
+	:s@\n@\="\r" .. expand("$HOME") .. "\r"@
 This replaces an end-of-line with a new line containing the value of $HOME. >
 
 	s/E/\="\<Char-0x20ac>"/g
@@ -1042,6 +1048,10 @@ inside of strings can change!  Also see 'softtabstop' option. >
 			cursor to the end of line (which is more logical,
 			but not Vi-compatible) use ":map Y y$".
 
+							*zy*
+["x]zy{motion}		Yank {motion} text [into register x].  Only differs
+			from `y` when selecting a block of text, see |v_zy|.
+
 							*v_y*
 {Visual}["x]y		Yank the highlighted text [into register x] (for
 			{Visual} see |Visual-mode|).
@@ -1050,6 +1060,12 @@ inside of strings can change!  Also see 'softtabstop' option. >
 {Visual}["x]Y		Yank the highlighted lines [into register x] (for
 			{Visual} see |Visual-mode|).
 
+							*v_zy*
+{Visual}["x]zy		Yank the highlighted text [into register x].  Trailing
+			whitespace at the end of each line of a selected block
+			won't be yanked.  Especially useful in combination
+			with `zp`.  (for {Visual} see |Visual-mode|)
+
 							*:y* *:yank* *E850*
 :[range]y[ank] [x]	Yank [range] lines [into register x]. Yanking to the
 			"* or "+ registers is possible only when the
@@ -1060,7 +1076,7 @@ inside of strings can change!  Also see 'softtabstop' option. >
 			in [range] (default: current line |cmdline-ranges|),
 			[into register x].
 
-							*p* *put* *E353*
+						*p* *put* *E353* *E1240*
 ["x]p			Put the text [from register x] after the cursor
 			[count] times.
 
@@ -1107,7 +1123,7 @@ inside of strings can change!  Also see 'softtabstop' option. >
 			the command.  You need to escape the '|' and '"'
 			characters to prevent them from terminating the
 			command.  Example: >
-				:put ='path' . \",/test\"
+				:put ='path' .. \",/test\"
 <			If there is no expression after '=', Vim uses the
 			previous expression.  You can see it with ":dis =".
 
@@ -1126,6 +1142,12 @@ inside of strings can change!  Also see 'softtabstop' option. >
 			Using the mouse only works when 'mouse' contains 'n'
 			or 'a'.
 
+["x]zp		    or					*zp* *zP*
+["x]zP			Like "p" and "P", except without adding trailing spaces
+			when pasting a block.  Thus the inserted text will not
+			always be a rectangle.  Especially useful in
+			combination with |v_zy|.
+
 You can use these commands to copy text from one place to another.  Do this
 by first getting the text into a register with a yank, delete or change
 command, then inserting the register contents with a put command.  You can
@@ -1154,10 +1176,13 @@ register.  With blockwise selection it also depends on the size of the block
 and whether the corners are on an existing character.  (Implementation detail:
 it actually works by first putting the register after the selection and then
 deleting the selection.)
-The previously selected text is put in the unnamed register.  If you want to
-put the same text into a Visual selection several times you need to use
+With 'p' the previously selected text is put in the unnamed register.  This is
+useful if you want to put that text somewhere else.  But you cannot repeat the
+same change.
+With 'P' the unnamed register is not changed, you can repeat the same change.
+But the deleted text cannot be used.  If you do need it you can use 'p' with
 another register.  E.g., yank the text to copy, Visually select the text to
-replace and use "0p .  You can repeat this as many times as you like, the
+replace and use "0p .  You can repeat this as many times as you like, and the
 unnamed register will be changed each time.
 
 When you use a blockwise Visual mode command and yank only a single line into
@@ -1175,6 +1200,9 @@ this happen.  However, if the width of the block is not a multiple of a <Tab>
 width and the text after the inserted block contains <Tab>s, that text may be
 misaligned.
 
+Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
+spaces.
+
 Note that after a characterwise yank command, Vim leaves the cursor on the
 first yanked character that is closest to the start of the buffer.  This means
 that "yl" doesn't move the cursor, but "yh" moves the cursor one character
@@ -1352,6 +1380,9 @@ The next three commands always work on whole lines.
 
 							*:t*
 :t			Synonym for copy.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 :[range]m[ove] {address}			*:m* *:mo* *:move* *E134*
 			Move the lines given by [range] to below the line
@@ -1649,7 +1680,8 @@ r	Automatically insert the current comment leader after hitting
 	<Enter> in Insert mode.
 							*fo-o*
 o	Automatically insert the current comment leader after hitting 'o' or
-	'O' in Normal mode.
+	'O' in Normal mode.  In case comment is unwanted in a specific place
+	use CTRL-U to quickly delete it. |i_CTRL-U|
 							*fo-q*
 q	Allow formatting of comments with "gq".
 	Note that formatting will not change blank lines or lines containing

runtime/doc/channel.txt

@@ -1,4 +1,4 @@
-*channel.txt*      For Vim version 8.2.  Last change: 2020 Oct 17
+*channel.txt*      For Vim version 8.2.  Last change: 2022 Apr 05
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -53,6 +53,7 @@ RAW	nothing known, Vim cannot tell where a message ends
 NL	every message ends in a NL (newline) character
 JSON	JSON encoding |json_encode()|
 JS	JavaScript style JSON-like encoding |js_encode()|
+LSP	Language Server Protocol encoding |language-server-protocol|
 
 Common combination are:
 - Using a job connected through pipes in NL mode.  E.g., to run a style
@@ -91,7 +92,7 @@ And you should see the message in Vim. You can move the cursor a word forward:
 
 To handle asynchronous communication a callback needs to be used: >
 	func MyHandler(channel, msg)
-	  echo "from the handler: " . a:msg
+	  echo "from the handler: " .. a:msg
 	endfunc
 	call ch_sendexpr(channel, 'hello!', {'callback': "MyHandler"})
 Vim will not wait for a response.  Now the server can send the response later
@@ -101,7 +102,7 @@ Instead of giving a callback with every send call, it can also be specified
 when opening the channel: >
 	call ch_close(channel)
 	let channel = ch_open('localhost:8765', {'callback': "MyHandler"})
-	call ch_sendexpr(channel, 'hello!')
+	call ch_sendexpr(channel, 'hello channel!')
 
 When trying out channels it's useful to see what is going on.  You can tell
 Vim to write lines in log file: >
@@ -118,10 +119,13 @@ To open a channel: >
 
 Use |ch_status()| to see if the channel could be opened.
 
-{address} has the form "hostname:port".  E.g., "localhost:8765".
-
-When using an IPv6 address, enclose it within square brackets.  E.g.,
-"[2001:db8::1]:8765".
+					*channel-address*
+{address} can be a domain name or an IP address, followed by a port number, or
+a Unix-domain socket path prefixed by "unix:".  E.g. >
+    www.example.com:80   " domain + port
+    127.0.0.1:1234       " IPv4 + port
+    [2001:db8::1]:8765   " IPv6 + port
+    unix:/tmp/my-socket  " Unix-domain socket path
 
 {options} is a dictionary with optional entries:	*channel-open-options*
 
@@ -130,17 +134,19 @@ When using an IPv6 address, enclose it within square brackets.  E.g.,
 	"js"   - Use JS (JavaScript) encoding, more efficient than JSON.
 	"nl"   - Use messages that end in a NL character
 	"raw"  - Use raw messages
+	"lsp"  - Use language server protocol encoding
 						*channel-callback* *E921*
 "callback"	A function that is called when a message is received that is
-		not handled otherwise.  It gets two arguments: the channel
-		and the received message. Example: >
+		not handled otherwise (e.g. a JSON message with ID zero).  It
+		gets two arguments: the channel and the received message.
+		Example: >
 	func Handle(channel, msg)
-	  echo 'Received: ' . a:msg
+	  echo 'Received: ' .. a:msg
 	endfunc
 	let channel = ch_open("localhost:8765", {"callback": "Handle"})
 <
-		When "mode" is "json" or "js" the "msg" argument is the body
-		of the received message, converted to Vim types.
+		When "mode" is "json" or "js" or "lsp" the "msg" argument is
+		the body of the received message, converted to Vim types.
 		When "mode" is "nl" the "msg" argument is one message,
 		excluding the NL.
 		When "mode" is "raw" the "msg" argument is the whole message
@@ -164,7 +170,19 @@ When using an IPv6 address, enclose it within square brackets.  E.g.,
 		to check for messages, the close_cb may be invoked while still
 		in the callback.  The plugin must handle this somehow, it can
 		be useful to know that no more data is coming.
-							*channel-drop*
+		If it is not known if there is a message to be read, use a
+		try/catch block: >
+			try
+			  let msg = ch_readraw(a:channel)
+			catch
+			  let msg = 'no message'
+			endtry
+			try
+			  let err = ch_readraw(a:channel, #{part: 'err'})
+			catch
+			  let err = 'no error'
+			endtry
+<							*channel-drop*
 "drop"		Specifies when to drop messages:
 		    "auto"	When there is no callback to handle a message.
 				The "close_cb" is also considered for this.
@@ -442,7 +460,7 @@ to check if there is something to read.
 Note that when there is no callback, messages are dropped.  To avoid that add
 a close callback to the channel.
 
-To read all output from a RAW channel that is available: >
+To read all normal output from a RAW channel that is available: >
 	let output = ch_readraw(channel)
 To read the error output: >
 	let output = ch_readraw(channel, {"part": "err"})
@@ -502,6 +520,7 @@ ch_evalexpr({handle}, {expr} [, {options}])			*ch_evalexpr()*
 		according to the type of channel.  The function cannot be used
 		with a raw channel.  See |channel-use|.
 		{handle} can be a Channel or a Job that has a Channel.
+		When using the "lsp" channel mode, {expr} must be a |Dict|.
 								*E917*
 		{options} must be a Dictionary.  It must not have a "callback"
 		entry.  It can have a "timeout" entry to specify the timeout
@@ -536,7 +555,7 @@ ch_evalraw({handle}, {string} [, {options}])		*ch_evalraw()*
 			GetChannel()->ch_evalraw(rawstring)
 
 ch_getbufnr({handle}, {what})				 *ch_getbufnr()*
-		Get the buffer number that {handle} is using for {what}.
+		Get the buffer number that {handle} is using for String {what}.
 		{handle} can be a Channel or a Job that has a Channel.
 		{what} can be "err" for stderr, "out" for stdout or empty for
 		socket output.
@@ -563,10 +582,15 @@ ch_info({handle})						*ch_info()*
 		When opened with ch_open():
 		   "hostname"	  the hostname of the address
 		   "port"	  the port of the address
+		   "path"	  the path of the Unix-domain socket
 		   "sock_status"  "open" or "closed"
 		   "sock_mode"	  "NL", "RAW", "JSON" or "JS"
 		   "sock_io"	  "socket"
 		   "sock_timeout" timeout in msec
+
+		Note that "path" is only present for Unix-domain sockets, for
+		regular ones "hostname" and "port" are present instead.
+
 		When opened with job_start():
 		   "out_status"	  "open", "buffered" or "closed"
 		   "out_mode"	  "NL", "RAW", "JSON" or "JS"
@@ -577,7 +601,7 @@ ch_info({handle})						*ch_info()*
 		   "err_io"	  "out", "null", "pipe", "file" or "buffer"
 		   "err_timeout"  timeout in msec
 		   "in_status"	  "open" or "closed"
-		   "in_mode"	  "NL", "RAW", "JSON" or "JS"
+		   "in_mode"	  "NL", "RAW", "JSON", "JS" or "LSP"
 		   "in_io"	  "null", "pipe", "file" or "buffer"
 		   "in_timeout"	  timeout in msec
 
@@ -586,8 +610,8 @@ ch_info({handle})						*ch_info()*
 
 
 ch_log({msg} [, {handle}])					*ch_log()*
-		Write {msg} in the channel log file, if it was opened with
-		|ch_logfile()|.
+		Write String {msg} in the channel log file, if it was opened
+		with |ch_logfile()|.
 		When {handle} is passed the channel number is used for the
 		message.
 		{handle} can be a Channel or a Job that has a Channel.  The
@@ -609,8 +633,8 @@ ch_logfile({fname} [, {mode}])					*ch_logfile()*
 		is going on in real time.
 
 		To enable the log very early, to see what is received from a
-		terminal during startup, use |--cmd|: >
-			vim --cmd "call ch_logfile('logfile', 'w')"
+		terminal during startup, use |--log|: >
+			vim --log logfile
 <
 		This function is not available in the |sandbox|.
 		NOTE: the channel communication is stored in the file, be
@@ -625,11 +649,8 @@ ch_open({address} [, {options}])				*ch_open()*
 		Open a channel to {address}.  See |channel|.
 		Returns a Channel.  Use |ch_status()| to check for failure.
 
-		{address} has the form "hostname:port", e.g.,
-		"localhost:8765".
-
-		When using an IPv6 address, enclose it within square brackets.
-		E.g., "[2001:db8::1]:8765".
+		{address} is a String, see |channel-address| for the possible
+		accepted forms.
 
 		If {options} is given it must be a |Dictionary|.
 		See |channel-open-options|.
@@ -673,6 +694,7 @@ ch_sendexpr({handle}, {expr} [, {options}])			*ch_sendexpr()*
 		with a raw channel.
 		See |channel-use|.				*E912*
 		{handle} can be a Channel or a Job that has a Channel.
+		When using the "lsp" channel mode, {expr} must be a |Dict|.
 
 		Can also be used as a |method|: >
 			GetChannel()->ch_sendexpr(expr)
@@ -852,7 +874,7 @@ available.
 job_getchannel({job})					 *job_getchannel()*
 		Get the channel handle that {job} is using.
 		To check if the job has no channel: >
-			if string(job_getchannel()) == 'channel fail'
+			if string(job_getchannel(job)) == 'channel fail'
 <
 		Can also be used as a |method|: >
 			GetJob()->job_getchannel()
@@ -1287,18 +1309,18 @@ prompt. >
 	" Create a channel log so we can see what happens.
 	call ch_logfile('logfile', 'w')
 
-	" Function handling a line of text has been typed.
+	" Function handling a line of text that has been typed.
 	func TextEntered(text)
 	  " Send the text to a shell with Enter appended.
 	  call ch_sendraw(g:shell_job, a:text .. "\n")
 	endfunc
 
-	" Function handling output from the shell: Added above the prompt.
+	" Function handling output from the shell: Add it above the prompt.
 	func GotOutput(channel, msg)
-	  call append(line("$") - 1, "- " . a:msg)
+	  call append(line("$") - 1, "- " .. a:msg)
 	endfunc
 
-	" Function handling the shell exist: close the window.
+	" Function handling the shell exits: close the window.
 	func JobExit(job, status)
 	  quit!
 	endfunc
@@ -1309,7 +1331,6 @@ prompt. >
 		\ err_cb: function('GotOutput'),
 		\ exit_cb: function('JobExit'),
 		\ })
-	let shell_ch = job_getchannel(shell_job)
 
 	new
 	set buftype=prompt
@@ -1320,6 +1341,117 @@ prompt. >
 	" start accepting shell commands
 	startinsert
 <
+The same in |Vim9| script: >
 
+	vim9script
+
+	# Create a channel log so we can see what happens.
+	ch_logfile('logfile', 'w')
+
+	var shell_job: job
+
+	# Function handling a line of text that has been typed.
+	def TextEntered(text: string)
+	  # Send the text to a shell with Enter appended.
+	  ch_sendraw(shell_job, text .. "\n")
+	enddef
+
+	# Function handling output from the shell: Add it above the prompt.
+	def GotOutput(channel: channel, msg: string)
+	  append(line("$") - 1, "- " .. msg)
+	enddef
+
+	# Function handling the shell exits: close the window.
+	def JobExit(job: job, status: number)
+	  quit!
+	enddef
+
+	# Start a shell in the background.
+	shell_job = job_start(["/bin/sh"], {
+				 out_cb: GotOutput,
+				 err_cb: GotOutput,
+				 exit_cb: JobExit,
+				 })
+
+	new
+	set buftype=prompt
+	var buf = bufnr('')
+	prompt_setcallback(buf, TextEntered)
+	prompt_setprompt(buf, "shell command: ")
+
+	# start accepting shell commands
+	startinsert
+
+==============================================================================
+14. Language Server Protocol			*language-server-protocol*
+
+The language server protocol specification is available at:
+
+    https://microsoft.github.io/language-server-protocol/specification
+
+Each LSP protocol message starts with a simple HTTP header followed by the
+payload encoded in JSON-RPC format.  This is described in:
+
+    https://www.jsonrpc.org/specification
+
+For messages received on a channel with mode set to "lsp", Vim will process
+the HTTP header and decode the payload into a Vim |Dict| type and call the
+channel callback or the specified callback function.  When sending messages on
+a channel using |ch_evalexpr()| or |ch_sendexpr()|, Vim will add the HTTP
+header and encode the Vim expression into JSON-RPC.
+
+To open a channel using the 'lsp' mode, set the 'mode' item in the |ch_open()|
+{options} argument to 'lsp'.  Example: >
+
+    let ch = ch_open(..., #{mode: 'lsp'})
+
+To open a channel using the 'lsp' mode with a job, set the 'in_mode' and
+'out_mode' items in the |job_start()| {options} argument to 'lsp'. Example: >
+
+    let job = job_start(...., #{in_mode: 'lsp', out_mode: 'lsp'})
+
+To synchronously send a JSON-RPC request to the server, use the |ch_evalexpr()|
+function. This function will return the response from the server. You can use
+the 'timeout' field in the {options} argument to control the response wait
+time. Example: >
+
+    let req = {}
+    let req.method = 'textDocument/definition'
+    let req.params = {}
+    let req.params.textDocument = #{uri: 'a.c'}
+    let req.params.position = #{line: 10, character: 3}
+    let resp = ch_evalexpr(ch, req, #{timeout: 100})
+
+Note that in the request message the 'id' field should not be specified. If it
+is specified, then Vim will overwrite the value with an internally generated
+identifier.  Vim currently supports only a number type for the 'id' field.
+
+To send a JSON-RPC request to the server and asynchronously process the
+response, use the |ch_sendexpr()| function and supply a callback function.
+Example: >
+
+    let req = {}
+    let req.method = 'textDocument/hover'
+    let req.params = {}
+    let req.params.textDocument = #{uri: 'a.c'}
+    let req.params.position = #{line: 10, character: 3}
+    let resp = ch_sendexpr(ch, req, #{callback: 'MyFn'})
+
+To send a JSON-RPC notification message to the server, use the |ch_sendexpr()|
+function. Example: >
+
+    call ch_sendexpr(ch, #{method: 'initialized'})
+
+To respond to a JSON-RPC request message from the server, use the
+|ch_sendexpr()| function.  In the response message, copy the 'id' field value
+from the server request message. Example: >
+
+    let resp = {}
+    let resp.id = req.id
+    let resp.result = 1
+    call ch_sendexpr(ch, resp)
+
+The JSON-RPC notification messages from the server are delivered through the
+|channel-callback| function.
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/cmdline.txt

@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 8.2.  Last change: 2021 May 08
+*cmdline.txt*   For Vim version 8.2.  Last change: 2022 Feb 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -170,7 +170,12 @@ CTRL-R {register}					*c_CTRL-R* *c_<C-R>*
 				too.
 				When the result is a Float it's automatically
 				converted to a String.
-		See |registers| about registers.
+				Note that when you only want to move the
+				cursor and not insert anything, you must make
+				sure the expression evaluates to an empty
+				string.  E.g.: >
+					<C-R><C-R>=setcmdpos(2)[-1]<CR>
+<		See |registers| about registers.
 		Implementation detail: When using the |expression| register
 		and invoking setcmdpos(), this sets the position before
 		inserting the resulting string.  Use CTRL-R CTRL-R to set the
@@ -222,7 +227,7 @@ CTRL-\ e {expr}						*c_CTRL-\_e*
 		Example: >
 			:cmap <F7> <C-\>eAppendSome()<CR>
 			:func AppendSome()
-			   :let cmd = getcmdline() . " Some()"
+			   :let cmd = getcmdline() .. " Some()"
 			   :" place the cursor on the )
 			   :call setcmdpos(strlen(cmd))
 			   :return cmd
@@ -700,6 +705,15 @@ Some Ex commands accept a line range in front of them.  This is noted as
 
 The basics are explained in section |10.3| of the user manual.
 
+In |Vim9| script a range needs to be prefixed with a colon to avoid ambiguity
+with continuation lines.  For example, "+" can be used for a range but is also
+a continuation of an expression: >
+	var result = start
+	+ print
+If the "+" is a range then it must be prefixed with a colon: >
+	var result = start
+	:+ print
+<
 						*:,* *:;*
 When separated with ';' the cursor position will be set to that line
 before interpreting the next line specifier.  This doesn't happen for ','.
@@ -716,7 +730,7 @@ If more line specifiers are given than required for the command, the first
 one(s) will be ignored.
 
 Line numbers may be specified with:		*:range* *{address}*
-	{number}	an absolute line number
+	{number}	an absolute line number  *E1247*
 	.		the current line			  *:.*
 	$		the last line in the file		  *:$*
 	%		equal to 1,$ (the entire file)		  *:%*
@@ -734,7 +748,8 @@ Line numbers may be specified with:		*:range* *{address}*
 
 Each may be followed (several times) by '+' or '-' and an optional number.
 This number is added or subtracted from the preceding line number.  If the
-number is omitted, 1 is used.
+number is omitted, 1 is used.  If there is nothing before the '+' or '-' then
+the current line is used.
 
 The "/" and "?" after {pattern} are required to separate the pattern from
 anything that follows.
@@ -764,7 +779,7 @@ Some commands allow for a count after the command.  This count is used as the
 number of lines to be used, starting with the line given in the last line
 specifier (the default is the cursor line).  The commands that accept a count
 are the ones that use a range but do not have a file name argument (because
-a file name can also be a number).
+a file name can also be a number).  The count cannot be negative.
 
 Examples: >
 	:s/x/X/g 5	substitute 'x' by 'X' in the current line and four
@@ -798,7 +813,7 @@ three lines: >
 		3:d<CR>		is translated into: .,.+2d<CR>
 <
 
-Visual Mode and Range					
+Visual Mode and Range
 							*v_:*
 {Visual}:	Starts a command-line with the Visual selected lines as a
 		range.  The code `:'<,'>` is used for this range, which makes
@@ -914,15 +929,19 @@ Note: these are typed literally, they are not special keys!
 							*:<amatch>* *<amatch>*
 	<amatch>   When executing autocommands, is replaced with the match for
 		   which this autocommand was executed.  *E497*
-		   It differs from <afile> only when the file name isn't used
-		   to match with (for FileType, Syntax and SpellFileMissing
+		   It differs from <afile> when the file name isn't used to
+		   match with (for FileType, Syntax and SpellFileMissing
 		   events).
+		   When the match is with a file name, it is expanded to the
+		   full path.
 							*:<sfile>* *<sfile>*
 	<sfile>    When executing a ":source" command, is replaced with the
 		   file name of the sourced file.  *E498*
-		   When executing a function, is replaced with the call stack,
-		   as with <stack> (this is for backwards compatibility, using
-		   <stack> is preferred).
+		   When executing a legacy function, is replaced with the call
+		   stack, as with <stack> (this is for backwards
+		   compatibility, using <stack> or <script> is preferred).
+		   In Vim9 script using <sfile> in a function gives error
+		   *E1245* .
 		   Note that filename-modifiers are useless when <sfile> is
 		   not used inside a script.
 							*:<stack>* *<stack>*
@@ -931,6 +950,13 @@ Note: these are typed literally, they are not special keys!
 		   and "script {file-name}[{lnum}]" for a script line, and
 		   ".." in between items.  E.g.:
 		   "function {function-name1}[{lnum}]..{function-name2}[{lnum}]"
+		   If there is no call stack you get error *E489* .
+							*:<script>* *<script>*
+	<script>   When executing a `:source` command, is replaced with the file
+		   name of the sourced file.  When executing a function, is
+		   replaced with the file name of the script where it is
+		   defined.
+		   If the file name cannot be determined you get error *E1274* .
 							*:<slnum>* *<slnum>*
 	<slnum>	   When executing a ":source" command, is replaced with the
 		   line number.  *E842*
@@ -1134,7 +1160,7 @@ in Normal mode and Insert mode.
 It is possible to use ":", "/" and other commands that use the command-line,
 but it's not possible to open another command-line window then.  There is no
 nesting.
-							*E11*
+							*E11* *E1188*
 The command-line window is not a normal window.  It is not possible to move to
 another window or edit another buffer.  All commands that would do this are
 disabled in the command-line window.  Of course it _is_ possible to execute

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 8.2.  Last change: 2021 Feb 10
+*diff.txt*      For Vim version 8.2.  Last change: 2022 Jan 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -335,8 +335,9 @@ After setting this variable, reload the syntax script: >
 
 FINDING THE DIFFERENCES					*diff-diffexpr*
 
-The 'diffexpr' option can be set to use something else than the standard
-"diff" program to compare two files and find the differences. *E959*
+The 'diffexpr' option can be set to use something else than the internal diff
+support or the standard "diff" program to compare two files and find the
+differences. *E959*
 
 When 'diffexpr' is empty, Vim uses this command to find the differences
 between file1 and file2: >
@@ -345,9 +346,11 @@ between file1 and file2: >
 
 The ">" is replaced with the value of 'shellredir'.
 
-The output of "diff" must be a normal "ed" style diff or a unified diff.  Do
-NOT use a context diff.  This example explains the format that Vim expects for
-the "ed" style diff: >
+The output of "diff" must be a normal "ed" style diff or a unified diff.  A
+context diff will NOT work.  For a unified diff no context lines can be used.
+Using "diff -u" will NOT work, use "diff -U0".
+
+This example explains the format that Vim expects for the "ed" style diff: >
 
 	1a2
 	> bbb
@@ -367,7 +370,7 @@ format mentioned.  These variables are set to the file names used:
 
 	v:fname_in		original file
 	v:fname_new		new version of the same file
-	v:fname_out		resulting diff file
+	v:fname_out		where to write the resulting diff file
 
 Additionally, 'diffexpr' should take care of "icase" and "iwhite" in the
 'diffopt' option.  'diffexpr' cannot change the value of 'lines' and
@@ -379,13 +382,13 @@ Example (this does almost the same as 'diffexpr' being empty): >
 	function MyDiff()
 	   let opt = ""
 	   if &diffopt =~ "icase"
-	     let opt = opt . "-i "
+	     let opt = opt .. "-i "
 	   endif
 	   if &diffopt =~ "iwhite"
-	     let opt = opt . "-b "
+	     let opt = opt .. "-b "
 	   endif
-	   silent execute "!diff -a --binary " . opt . v:fname_in . " " . v:fname_new .
-		\  " > " . v:fname_out
+	   silent execute "!diff -a --binary " .. opt .. v:fname_in .. " " .. v:fname_new ..
+		\  " > " .. v:fname_out
 	   redraw!
 	endfunction
 
@@ -396,6 +399,13 @@ mode, so that a CTRL-Z doesn't end the text on DOS.
 The `redraw!` command may not be needed, depending on whether executing a
 shell command shows something on the display or not.
 
+If the 'diffexpr' expression starts with s: or |<SID>|, then it is replaced
+with the script ID (|local-function|). Example: >
+		set diffexpr=s:MyDiffExpr()
+		set diffexpr=<SID>SomeDiffExpr()
+Otherwise, the expression is evaluated in the context of the script where the
+option was set, thus script-local items are available.
+
 						*E810* *E97*
 Vim will do a test if the diff output looks alright.  If it doesn't, you will
 get an error message.  Possible causes:
@@ -435,8 +445,8 @@ Example (this does the same as 'patchexpr' being empty): >
 
 	set patchexpr=MyPatch()
 	function MyPatch()
-	   :call system("patch -o " . v:fname_out . " " . v:fname_in .
-	   \  " < " . v:fname_diff)
+	   :call system("patch -o " .. v:fname_out .. " " .. v:fname_in ..
+	   \  " < " .. v:fname_diff)
 	endfunction
 
 Make sure that using the "patch" program doesn't have unwanted side effects.
@@ -447,4 +457,12 @@ evaluating 'patchexpr'.  This hopefully avoids that files in the current
 directory are accidentally patched.  Vim will also delete files starting with
 v:fname_in and ending in ".rej" and ".orig".
 
+If the 'patchexpr' expression starts with s: or |<SID>|, then it is replaced
+with the script ID (|local-function|). Example: >
+		set patchexpr=s:MyPatchExpr()
+		set patchexpr=<SID>SomePatchExpr()
+Otherwise, the expression is evaluated in the context of the script where the
+option was set, thus script-local items are available.
+
+
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/digraph.txt

@@ -1,4 +1,4 @@
-*digraph.txt*   For Vim version 8.2.  Last change: 2020 Jul 16
+*digraph.txt*   For Vim version 8.2.  Last change: 2021 Jul 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -38,6 +38,9 @@ An alternative is using the 'keymap' option.
 <			Avoid defining a digraph with '_' (underscore) as the
 			first character, it has a special meaning in the
 			future.
+			NOTE: This command cannot add a digraph that starts
+			with a white space.  If you want to add such digraph,
+			you can use |digraph_set()| instead.
 
 Vim is normally compiled with the |+digraphs| feature.  If the feature is
 disabled, the ":digraph" command will display an error message.
@@ -348,8 +351,8 @@ $	DO	0x24	 36	DOLLAR SIGN
 þ	th	0xfe	254	LATIN SMALL LETTER THORN (Icelandic)
 ÿ	y:	0xff	255	LATIN SMALL LETTER Y WITH DIAERESIS
 
-If your Vim is compiled with |multibyte| support and you are using a multibyte
-'encoding', Vim provides this enhanced set of additional digraphs:
+If you are using a |multibyte| 'encoding', Vim provides this enhanced set of
+additional digraphs:
 
 							*digraph-table-mbyte*
 char  digraph	hex	dec	official name ~

runtime/doc/editing.txt

@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 8.2.  Last change: 2021 Apr 05
+*editing.txt*   For Vim version 8.2.  Last change: 2022 Apr 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -222,7 +222,7 @@ If you want to keep the changed buffer without saving it, switch on the
 			Edit {file} always.  Discard any changes to the
 			current buffer.
 			Also see |++opt| and |+cmd|.
-
+							*:edit_#* *:e#*
 :e[dit] [++opt] [+cmd] #[count]
 			Edit the [count]th buffer (as shown by |:files|).
 			This command does the same as [count] CTRL-^.  But ":e
@@ -389,7 +389,7 @@ as a wildcard when "[" is in the 'isfname' option.  A simple way to avoid this
 is to use "path\[[]abc]", this matches the file "path\[abc]".
 
 					*starstar-wildcard*
-Expanding "**" is possible on Unix, Win32, Mac OS/X and a few other systems.
+Expanding "**" is possible on Unix, Win32, macOS and a few other systems.
 This allows searching a directory tree.  This goes up to 100 directories deep.
 Note there are some commands where this works slightly differently, see
 |file-searching|.
@@ -433,7 +433,7 @@ This also works for most other systems, with the restriction that the
 backticks must be around the whole item.  It is not possible to have text
 directly before the first or just after the last backtick.
 
-							*`=*
+						*`=* *E1083*
 You can have the backticks expanded as a Vim expression, instead of as an
 external command, by putting an equal sign right after the first backtick,
 e.g.: >
@@ -444,9 +444,9 @@ does apply like to other wildcards.
 
 Environment variables in the expression are expanded when evaluating the
 expression, thus this works: >
-	:e `=$HOME . '/.vimrc'`
+	:e `=$HOME .. '/.vimrc'`
 This does not work, $HOME is inside a string and used literally: >
-	:e `='$HOME' . '/.vimrc'`
+	:e `='$HOME' .. '/.vimrc'`
 
 If the expression returns a string then names are to be separated with line
 breaks.  When the result is a |List| then each item is used as a name.  Line
@@ -633,7 +633,7 @@ list of the current window.
 			Also see |++opt| and |+cmd|.
 
 :[count]arga[dd] {name} ..			*:arga* *:argadd* *E479*
-:[count]arga[dd]
+:[count]arga[dd]						*E1156*
 			Add the {name}s to the argument list.  When {name} is
 			omitted add the current buffer name to the argument
 			list.
@@ -650,12 +650,19 @@ list of the current window.
 			And after the last one:
 				:+2argadd y	a b c x y
 			There is no check for duplicates, it is possible to
-			add a file to the argument list twice.
-			The currently edited file is not changed.
+			add a file to the argument list twice.  You can use
+			|:argdedupe| to fix it afterwards: >
+				:argadd *.txt | argdedupe
+<			The currently edited file is not changed.
 			Note: you can also use this method: >
 				:args ## x
 <			This will add the "x" item and sort the new list.
 
+:argded[upe]					*:argded* *:argdedupe*
+			Remove duplicate filenames from the argument list.
+			If your current file is a duplicate, your current file
+			will change to the original file index.
+
 :argd[elete] {pattern} ..		*:argd* *:argdelete* *E480* *E610*
 			Delete files from the argument list that match the
 			{pattern}s.  {pattern} is used like a file pattern,
@@ -883,7 +890,7 @@ Note: When the 'write' option is off, you are not able to write any file.
 
 							*:w* *:write*
 					*E502* *E503* *E504* *E505*
-					*E512* *E514* *E667* *E796* *E949*
+					*E512* *E514* *E667* *E949*
 :w[rite] [++opt]	Write the whole buffer to the current file.  This is
 			the normal way to save changes to a file.  It fails
 			when the 'readonly' option is set or when there is
@@ -1140,6 +1147,9 @@ The names can be in upper- or lowercase.
 			made.
 			When 'hidden' is set and there are more windows, the
 			current buffer becomes hidden, after writing the file.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 							*:exi* *:exit*
 :[range]exi[t][!] [++opt] [file]
@@ -1214,7 +1224,7 @@ Examples: >
 
 If you want to always use ":confirm", set the 'confirm' option.
 
-			*:browse* *:bro* *E338* *E614* *E615* *E616*
+			*:browse* *:bro* *E338*
 :bro[wse] {command}	Open a file selection dialog for an argument to
 			{command}.  At present this works for |:e|, |:w|,
 			|:wall|, |:wq|, |:wqall|, |:x|, |:xall|, |:exit|,
@@ -1225,7 +1235,9 @@ If you want to always use ":confirm", set the 'confirm' option.
 			|:diffsplit|, |:diffpatch|, |:open|, |:pedit|,
 			|:redir|, |:source|, |:update|, |:visual|, |:vsplit|,
 			and |:qall| if 'confirm' is set.
-			{only in Win32, Athena, Motif, GTK and Mac GUI}
+			{only in Win32, Motif, GTK and Mac GUI, in
+			console `browse edit` works if the FileExplorer
+			autocommand group exists}
 			When ":browse" is not possible you get an error
 			message.  If the |+browse| feature is missing or the
 			{command} doesn't support browsing, the {command} is
@@ -1296,11 +1308,12 @@ Changing directory fails when the current buffer is modified, the '.' flag is
 present in 'cpoptions' and "!" is not used in the command.
 
 							*:cd* *E747* *E472*
-:cd[!]			On non-Unix systems: Print the current directory
-			name.  On Unix systems: Change the current directory
-			to the home directory.  Use |:pwd| to print the
-			current directory on all systems.
-			On Unix systems: clear any window-local directory.
+:cd[!]			On non-Unix systems when 'cdhome' is off: Print the
+			current directory name.
+			Otherwise: Change the current directory to the home
+			directory.  Clear any window-local directory.
+			Use |:pwd| to print the current directory on all
+			systems.
 
 :cd[!] {path}		Change the current directory to {path}.
 			If {path} is relative, it is searched for in the
@@ -1320,33 +1333,33 @@ present in 'cpoptions' and "!" is not used in the command.
 							*:chd* *:chdir*
 :chd[ir][!] [path]	Same as |:cd|.
 
-							*:tcd*
-:tcd[!] {path}		Like |:cd|, but only set the directory for the current
+							*:tc* *:tcd*
+:tc[d][!] {path}	Like |:cd|, but only set the directory for the current
 			tab.  The current window will also use this directory.
 			The current directory is not changed for windows in
 			other tabs and for windows in the current tab that
 			have their own window-local directory.
 
+							*:tcd-*
+:tc[d][!] -		Change to the previous current directory, before the
+			last ":tcd {path}" command.
+
 							*:tch* *:tchdir*
 :tch[dir][!]		Same as |:tcd|.
 
-							*:tcd-*
-:tcd[!] -		Change to the previous current directory, before the
-			last ":tcd {path}" command.
-
 							*:lc* *:lcd*
 :lc[d][!] {path}	Like |:cd|, but only set the current directory when
 			the cursor is in the current window.  The current
 			directory for other windows is not changed, switching
 			to another window will stop using {path}.
 
-							*:lch* *:lchdir*
-:lch[dir][!]		Same as |:lcd|.
-
 							*:lcd-*
 :lcd[!] -		Change to the previous current directory, before the
 			last ":lcd {path}" command.
 
+							*:lch* *:lchdir*
+:lch[dir][!]		Same as |:lcd|.
+
 							*:pw* *:pwd* *E187*
 :pw[d]			Print the current directory name.
 			Also see |getcwd()|.
@@ -1373,14 +1386,15 @@ change anything for the current directory.
 When a |:lcd| command has been used for a window, the specified directory
 becomes the current directory for that window.  Windows where the |:lcd|
 command has not been used stick to the global or tab-local current directory.
-When jumping to another window the current directory will become the last
+When jumping to another window the current directory is changed to the last
 specified local current directory.  If none was specified, the global or
-tab-local current directory is used.
+tab-local current directory is used.  When creating a new window it inherits
+the local directory of the current window.
 
 When a |:tcd| command has been used for a tab page, the specified directory
 becomes the current directory for the current tab page and the current window.
 The current directory of other tab pages is not affected.  When jumping to
-another tab page, the current directory will become the last specified local
+another tab page, the current directory is changed to the last specified local
 directory for that tab page. If the current tab has no local current directory
 the global current directory is used.
 
@@ -1469,8 +1483,11 @@ be readable again.  If you use a wrong key, it will be a mess.
 :X	Prompt for an encryption key.  The typing is done without showing the
 	actual text, so that someone looking at the display won't see it.
 	The typed key is stored in the 'key' option, which is used to encrypt
-	the file when it is written.  The file will remain unchanged until you
-	write it.  See also |-x|.
+	the file when it is written.
+	The file will remain unchanged until you write it.  Note that commands
+	such as `:xit` and `ZZ` will NOT write the file unless there are other
+	changes.
+	See also |-x|.
 
 The value of the 'key' options is used when text is written.  When the option
 is not empty, the written file will be encrypted, using the value as the
@@ -1633,6 +1650,11 @@ If you don't get warned often enough you can use the following command.
 			if it exists now.
 			Once a file has been checked the timestamp is reset,
 			you will not be warned again.
+			Syntax highlighting, marks, diff status,
+			'fileencoding', 'fileformat' and 'binary' options
+			are not changed.  See |v:fcs_choice| to reload these
+			too (for example, if a code formatting tools has
+			changed the file).
 
 :[N]checkt[ime] {filename}
 :[N]checkt[ime] [N]
@@ -1671,6 +1693,11 @@ It is also possible that you modified the file yourself, from another edit
 session or with another command (e.g., a filter command).  Then you will know
 which version of the file you want to keep.
 
+The accuracy of the time check depends on the filesystem.  On Unix it is
+usually sub-second.  With old file sytems and on MS-Windows it is normally one
+second.  Use `has('nanotime')` to check if sub-second time stamp checks are
+available.
+
 There is one situation where you get the message while there is nothing wrong:
 On a Win32 system on the day daylight saving time starts.  There is something
 in the Win32 libraries that confuses Vim about the hour time difference.  The
@@ -1749,6 +1776,10 @@ There are three different types of searching:
 	/u/user_x/work/include
 	/u/user_x/include
 
+<   Note: If your 'path' setting includes a non-existing directory, Vim will
+   skip the non-existing directory, and also does not search in the parent of
+   the non-existing directory if upwards searching is used.
+
 3) Combined up/downward search:
    If Vim's current path is /u/user_x/work/release and you do >
 	set path=**;/u/user_x

runtime/doc/filetype.txt

@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 8.2.  Last change: 2021 Mar 11
+*filetype.txt*  For Vim version 8.2.  Last change: 2022 Apr 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -133,23 +133,36 @@ shell script: "#!/bin/csh".
 argument was used.
 
 							*filetype-overrule*
-When the same extension is used for two filetypes, Vim tries to guess what
-kind of file it is.  This doesn't always work.  A number of global variables
-can be used to overrule the filetype used for certain extensions:
+When the same extension is used for multiple filetypes, Vim tries to guess
+what kind of file it is.  This doesn't always work.  A number of global
+variables can be used to overrule the filetype used for certain extensions:
 
 	file name	variable ~
 	*.asa		g:filetype_asa	|ft-aspvbs-syntax| |ft-aspperl-syntax|
-	*.asp		g:filetype_asp	|ft-aspvbs-syntax| |ft-aspperl-syntax|
 	*.asm		g:asmsyntax	|ft-asm-syntax|
-	*.prg		g:filetype_prg
-	*.pl		g:filetype_pl
-	*.inc		g:filetype_inc
-	*.w		g:filetype_w	|ft-cweb-syntax|
+	*.asp		g:filetype_asp	|ft-aspvbs-syntax| |ft-aspperl-syntax|
+	*.bas		g:filetype_bas	|ft-basic-syntax|
+	*.cfg		g:filetype_cfg
+	*.dat		g:filetype_dat
+	*.frm		g:filetype_frm	|ft-form-syntax|
+	*.fs		g:filetype_fs	|ft-forth-syntax|
 	*.i		g:filetype_i	|ft-progress-syntax|
+	*.inc		g:filetype_inc
+	*.m		g:filetype_m	|ft-mathematica-syntax|
+	*.mod		g:filetype_mod
 	*.p		g:filetype_p	|ft-pascal-syntax|
+	*.pl		g:filetype_pl
 	*.pp		g:filetype_pp	|ft-pascal-syntax|
+	*.prg		g:filetype_prg
+	*.src		g:filetype_src
+	*.sys		g:filetype_sys
 	*.sh		g:bash_is_sh	|ft-sh-syntax|
 	*.tex		g:tex_flavor	|ft-tex-plugin|
+	*.w		g:filetype_w	|ft-cweb-syntax|
+
+For a few filetypes the global variable is used only when the filetype could
+not be detected:
+	*.r		g:filetype_r	|ft-rexx-syntax|
 
 							*filetype-ignore*
 To avoid that certain files are being inspected, the g:ft_ignore_pat variable
@@ -356,12 +369,12 @@ define yourself.  There are a few ways to avoid this:
    You need to define your own mapping before the plugin is loaded (before
    editing a file of that type).  The plugin will then skip installing the
    default mapping.
-						*no_mail_maps*
+					*no_mail_maps* *g:no_mail_maps*
 3. Disable defining mappings for a specific filetype by setting a variable,
    which contains the name of the filetype.  For the "mail" filetype this
    would be: >
 	:let no_mail_maps = 1
-<						*no_plugin_maps*
+<					*no_plugin_maps* *g:no_plugin_maps*
 4. Disable defining mappings for all filetypes by setting a variable: >
 	:let no_plugin_maps = 1
 <
@@ -544,6 +557,14 @@ One command, :DiffGitCached, is provided to show a diff of the current commit
 in the preview window.  It is equivalent to calling "git diff --cached" plus
 any arguments given to the command.
 
+GPROF							*ft-gprof-plugin*
+
+The gprof filetype plugin defines a mapping <C-]> to jump from a function
+entry in the gprof flat profile or from a function entry in the call graph
+to the details of that function in the call graph.
+
+The mapping can be disabled with: >
+	let g:no_gprof_maps = 1
 
 MAIL							*ft-mail-plugin*
 
@@ -632,7 +653,7 @@ For fish, add to the config file
 MARKDOWN                                                *ft-markdown-plugin*
 
 To enable folding use this: >
-        let g:markdown_folding = 1
+	let g:markdown_folding = 1
 <
 
 PDF							*ft-pdf-plugin*

runtime/doc/fold.txt

@@ -1,4 +1,4 @@
-*fold.txt*      For Vim version 8.2.  Last change: 2019 Jun 02
+*fold.txt*      For Vim version 8.2.  Last change: 2022 Jan 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -121,6 +121,11 @@ method can be very slow!
 Try to avoid the "=", "a" and "s" return values, since Vim often has to search
 backwards for a line for which the fold level is defined.  This can be slow.
 
+If the 'foldexpr' expression starts with s: or |<SID>|, then it is replaced
+with the script ID (|local-function|). Examples: >
+		set foldexpr=s:MyFoldExpr()
+		set foldexpr=<SID>SomeFoldExpr()
+<
 An example of using "a1" and "s1": For a multi-line C comment, a line
 containing "/*" would return "a1" to start a fold, and a line containing "*/"
 would return "s1" to end the fold after that line: >
@@ -502,11 +507,14 @@ Note the use of backslashes to avoid some characters to be interpreted by the
     :function MyFoldText()
     :  let line = getline(v:foldstart)
     :  let sub = substitute(line, '/\*\|\*/\|{{{\d\=', '', 'g')
-    :  return v:folddashes . sub
+    :  return v:folddashes .. sub
     :endfunction
 
 Evaluating 'foldtext' is done in the |sandbox|.  The current window is set to
-the window that displays the line.  Errors are ignored.
+the window that displays the line.  The context is set to the script where the
+option was last set.
+
+Errors are ignored.  For debugging set the 'debug' option to "throw".
 
 The default value is |foldtext()|.  This returns a reasonable text for most
 types of folding.  If you don't like it, you can specify your own 'foldtext'
@@ -524,6 +532,11 @@ The resulting line is truncated to fit in the window, it never wraps.
 When there is room after the text, it is filled with the character specified
 by 'fillchars'.
 
+If the 'foldtext' expression starts with s: or |<SID>|, then it is replaced
+with the script ID (|local-function|). Examples: >
+		set foldtext=s:MyFoldText()
+		set foldtext=<SID>SomeFoldText()
+<
 Note that backslashes need to be used for characters that the ":set" command
 handles differently: Space, backslash and double-quote. |option-backslash|
 
@@ -541,6 +554,8 @@ nest, the nested fold is one character right of the fold it's contained in.
 
 A closed fold is indicated with a '+'.
 
+These characters can be changed with the 'fillchars' option.
+
 Where the fold column is too narrow to display all nested folds, digits are
 shown to indicate the nesting level.
 

runtime/doc/ft_ada.txt

@@ -1,4 +1,4 @@
-*ft_ada.txt*	For Vim version 8.2.  Last change: 2010 Jul 20
+*ft_ada.txt*	For Vim version 8.2.  Last change: 2022 Mar 13
 
 
 		    ADA FILE TYPE PLUG-INS REFERENCE MANUAL~
@@ -89,9 +89,9 @@ file is opened and adds Ada related entries to the main and pop-up menu.
 								 *ft-ada-omni*
 
 The Ada omni-completions (|i_CTRL-X_CTRL-O|) uses tags database created either
-by "gnat xref -v" or the "exuberant Ctags (http://ctags.sourceforge.net).  The
-complete function will automatically detect which tool was used to create the
-tags file.
+by "gnat xref -v" or the "Universal Ctags" (https://ctags.io).  The complete
+function will automatically detect which tool was used to create the tags
+file.
 
 ------------------------------------------------------------------------------
 3.1 Omni Completion with "gnat xref" ~
@@ -125,18 +125,18 @@ NOTE: "gnat xref -v" is very tricky to use as it has almost no diagnostic
 3.2 Omni Completion with "ctags"~
 								   *ada-ctags*
 
-Exuberant Ctags uses its own multi-language code parser. The parser is quite
-fast, produces a lot of extra information (hence the name "Exuberant Ctags")
-and can run on files which currently do not compile.
+Universal/Exuberant Ctags use their own multi-language code parser.  The
+parser is quite fast, produces a lot of extra information and can run on files
+which currently do not compile.
 
-There are also lots of other Vim-tools which use exuberant Ctags.
+There are also lots of other Vim-tools which use Universal/Exuberant Ctags.
+Universal Ctags is preferred, Exuberant Ctags is no longer being developed.
 
-You will need to install a version of the Exuberant Ctags which has Ada
-support patched in. Such a version is available from the GNU Ada Project
-(http://gnuada.sourceforge.net).
+You will need to install Universal Ctags which is available from
+https://ctags.io
 
-The Ada parser for Exuberant Ctags is fairly new - don't expect complete
-support yet.
+The Ada parser for Universal/Exuberant Ctags is fairly new - don't expect
+complete support yet.
 
 ==============================================================================
 4. Compiler Support ~

runtime/doc/ft_ps1.txt

@@ -1,4 +1,4 @@
-*ps1.txt*  A Windows PowerShell syntax plugin for Vim
+*ft_ps1.txt*  A Windows PowerShell syntax plugin for Vim
 
 Author:  Peter Provost <https://www.github.com/PProvost>
 License: Apache 2.0

runtime/doc/ft_raku.txt

@@ -1,4 +1,4 @@
-*vim-raku.txt*	The Raku programming language filetype
+*ft_raku.txt*	The Raku programming language filetype
 
                                                       *vim-raku*
 
@@ -45,22 +45,22 @@ Numbers, subscripts and superscripts are available with 's' and 'S':
 	1s ₁    1S ¹  ~
 	2s ₂    9S ⁹  ~
 
-But some don´t come defined by default. Those are digraph definitions you can
+But some don't come defined by default. Those are digraph definitions you can
 add in your ~/.vimrc file. >
-	exec 'digraph \\ '.char2nr('∖')
-	exec 'digraph \< '.char2nr('≼')
-	exec 'digraph \> '.char2nr('≽')
-	exec 'digraph (L '.char2nr('⊈')
-	exec 'digraph )L '.char2nr('⊉')
-	exec 'digraph (/ '.char2nr('⊄')
-	exec 'digraph )/ '.char2nr('⊅')
-	exec 'digraph )/ '.char2nr('⊅')
-	exec 'digraph U+ '.char2nr('⊎')
-	exec 'digraph 0- '.char2nr('⊖')
+	exec 'digraph \\ ' .. char2nr('∖')
+	exec 'digraph \< ' .. char2nr('≼')
+	exec 'digraph \> ' .. char2nr('≽')
+	exec 'digraph (L ' .. char2nr('⊈')
+	exec 'digraph )L ' .. char2nr('⊉')
+	exec 'digraph (/ ' .. char2nr('⊄')
+	exec 'digraph )/ ' .. char2nr('⊅')
+	exec 'digraph )/ ' .. char2nr('⊅')
+	exec 'digraph U+ ' .. char2nr('⊎')
+	exec 'digraph 0- ' .. char2nr('⊖')
 	" Euler's constant
-	exec 'digraph ne '.char2nr('𝑒')
+	exec 'digraph ne ' .. char2nr('𝑒')
 	" Raku's atomic operations marker
-	exec 'digraph @@ '.char2nr('⚛')
+	exec 'digraph @@ ' .. char2nr('⚛')
 
 Alternatively, you can write Insert mode abbreviations that convert ASCII-
 based operators into their single-character Unicode equivalent. >

runtime/doc/ft_rust.txt

@@ -26,7 +26,7 @@ behavior of the plugin.
 g:rustc_path~
 	Set this option to the path to rustc for use in the |:RustRun| and
 	|:RustExpand| commands. If unset, "rustc" will be located in $PATH: >
-	    let g:rustc_path = $HOME."/bin/rustc"
+	    let g:rustc_path = $HOME .. "/bin/rustc"
 <
 
                                                   *g:rustc_makeprg_no_percent*
@@ -87,7 +87,7 @@ g:rust_bang_comment_leader~
 g:ftplugin_rust_source_path~
 	Set this option to a path that should be prepended to 'path' for Rust
 	source files: >
-	    let g:ftplugin_rust_source_path = $HOME.'/dev/rust'
+	    let g:ftplugin_rust_source_path = $HOME .. '/dev/rust'
 <
 
                                                        *g:rustfmt_command*

runtime/doc/ft_sql.txt

@@ -1,4 +1,4 @@
-*ft_sql.txt*	For Vim version 8.2.  Last change: 2019 Dec 07
+*ft_sql.txt*	For Vim version 8.2.  Last change: 2022 Apr 06
 
 by David Fishburn
 
@@ -109,8 +109,8 @@ must be configurable.  The filetype plugin attempts to define many of the
 standard objects, plus many additional ones.  In order to make this as
 flexible as possible, you can override the list of objects from within your
 |vimrc| with the following: >
-    let g:ftplugin_sql_objects = 'function,procedure,event,table,trigger' .
-		\ ',schema,service,publication,database,datatype,domain' .
+    let g:ftplugin_sql_objects = 'function,procedure,event,table,trigger' ..
+		\ ',schema,service,publication,database,datatype,domain' ..
 		\ ',index,subscription,synchronization,view,variable'
 
 The following |Normal| mode and |Visual| mode maps have been created which use
@@ -131,10 +131,10 @@ Repeatedly pressing ]} will cycle through each of these create statements: >
     create index i1 on t1 (c1);
 
 The default setting for g:ftplugin_sql_objects is: >
-    let g:ftplugin_sql_objects = 'function,procedure,event,' .
-		\ '\\(existing\\\\|global\\s\\+temporary\\s\\+\\)\\\{,1}' .
-		\ 'table,trigger' .
-		\ ',schema,service,publication,database,datatype,domain' .
+    let g:ftplugin_sql_objects = 'function,procedure,event,' ..
+		\ '\\(existing\\\\|global\\s\\+temporary\\s\\+\\)\\\{,1}' ..
+		\ 'table,trigger' ..
+		\ ',schema,service,publication,database,datatype,domain' ..
 		\ ',index,subscription,synchronization,view,variable'
 
 The above will also handle these cases: >
@@ -440,7 +440,7 @@ the space bar):
 			     replace the column list with the list of tables.
 			   - This allows you to quickly drill down into a
 			     table to view its columns and back again.
-			   - <Right> and <Left> can be also be chosen via
+			   - <Right> and <Left> can also be chosen via
 			     your |.vimrc| >
                                 let g:ftplugin_sql_omni_key_right = '<Right>'
                                 let g:ftplugin_sql_omni_key_left  = '<Left>'
@@ -559,7 +559,7 @@ the SQL completion plugin. >
 <	1. After typing SELECT press <C-C>t to display a list of tables.
 	2. Highlight the table you need the column list for.
 	3. Press <Enter> to choose the table from the list.
-	4. Press <C-C>l to request a comma separated list of all columns
+	4. Press <C-C>l to request a comma-separated list of all columns
 	   for this table.
 	5. Based on the table name chosen in step 3, the plugin attempts to
 	   decide on a reasonable table alias.	You are then prompted to
@@ -613,7 +613,7 @@ your |vimrc|: >
 >
     omni_sql_use_tbl_alias
 <	- Default: a
-	- This setting is only used when generating a comma separated
+	- This setting is only used when generating a comma-separated
 	  column list.	By default the map is <C-C>l.  When generating
 	  a column list, an alias can be prepended to the beginning of each
 	  column, for example:	e.emp_id, e.emp_name.  This option has three
@@ -697,9 +697,9 @@ plugin. >
     <C-C>c
 <       - Displays a list of columns for a specific table. >
     <C-C>l
-<       - Displays a comma separated list of columns for a specific table. >
+<       - Displays a comma-separated list of columns for a specific table. >
     <C-C>L
-<       - Displays a comma separated list of columns for a specific table.
+<       - Displays a comma-separated list of columns for a specific table.
 	  This should only be used when the completion window is active. >
     <Right>
 <	- Displays a list of columns for the table currently highlighted in

runtime/doc/gui.txt

@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 8.2.  Last change: 2021 May 01
+*gui.txt*       For Vim version 8.2.  Last change: 2022 Apr 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -25,7 +25,7 @@ Other GUI documentation:
 
 First you must make sure you actually have a version of Vim with the GUI code
 included.  You can check this with the ":version" command, it says "with xxx
-GUI", where "xxx" is X11-Motif, X11-Athena, Photon, GTK2, GTK3, etc., or
+GUI", where "xxx" is X11-Motif, Photon, GTK2, GTK3, etc., or
 "MS-Windows 32 bit GUI version".
 
 How to start the GUI depends on the system used.  Mostly you can run the
@@ -108,7 +108,7 @@ There are a number of options which only have meaning in the GUI version of
 Vim.  These are 'guicursor', 'guifont', 'guipty' and 'guioptions'.  They are
 documented in |options.txt| with all the other options.
 
-If using the Motif or Athena version of the GUI (but not for the GTK+ or
+If using the Motif version of the GUI (but not for the GTK+ or
 Win32 version), a number of X resources are available.  See |gui-resources|.
 
 Another way to set the colors for different occasions is with highlight
@@ -147,7 +147,8 @@ task bar with the 'guiheadroom' option.
 						    *:win* *:winsize* *E465*
 :win[size] {width} {height}
 		Set the window height to {width} by {height} characters.
-		Obsolete, use ":set lines=11 columns=22".
+		It is recommended to use `:set lines=11 columns=22` instead,
+		since it's easy to see what the numbers mean.
 		If you get less lines than expected, check the 'guiheadroom'
 		option.
 
@@ -155,8 +156,8 @@ If you are running the X Window System, you can get information about the
 window Vim is running in with these commands: >
 	:!xwininfo -id $WINDOWID
 	:!xprop -id $WINDOWID
-	:execute '!xwininfo -id ' . v:windowid
-	:execute '!xprop -id ' . v:windowid
+	:execute '!xwininfo -id ' .. v:windowid
+	:execute '!xprop -id ' .. v:windowid
 <
 							*gui-IME* *iBus*
 Input methods for international characters in X that rely on the XIM
@@ -235,7 +236,7 @@ takes too much time or you don't like the cursor jumping to another line,
 include the 'h' flag in 'guioptions'.  Then the scrolling is limited by the
 text of the current cursor line.
 
-							*athena-intellimouse*
+							*motif-intellimouse*
 If you have an Intellimouse and an X server that supports using the wheel,
 then you can use the wheel to scroll the text up and down in gvim.  This works
 with XFree86 4.0 and later, and with some older versions when you add patches.
@@ -260,6 +261,7 @@ Other options that are relevant:
 'mousefocus'	window focus follows mouse pointer |gui-mouse-focus|
 'mousemodel'	what mouse button does which action
 'mousehide'	hide mouse pointer while typing text
+'mousemoveevent' enable mouse move events so that <MouseMove> can be mapped
 'selectmode'	whether to start Select mode or Visual mode
 
 A quick way to set these is with the ":behave" command.
@@ -405,13 +407,17 @@ These mappings make selection work the way it probably should in a Motif
 application, with shift-left mouse allowing for extending the visual area
 rather than the right mouse button.
 
+<MouseMove> may be mapped, but 'mousemoveevent' must be enabled to use the
+mapping.
+
 Mouse mapping with modifiers does not work for modeless selection.
 
 
 3.7 Drag and drop						*drag-n-drop*
 
 You can drag and drop one or more files into the Vim window, where they will
-be opened as if a |:drop| command was used.
+be opened as if a |:drop| command was used.  You can check if this is
+supported with the *drop_file* feature: `has('drop_file')`.
 
 If you hold down Shift while doing this, Vim changes to the first dropped
 file's directory.  If you hold Ctrl Vim will always split a new window for the
@@ -740,7 +746,7 @@ because the item will never be selected.  Use a single colon to keep it
 simple.
 
 							*gui-toolbar*
-The toolbar is currently available in the Win32, Athena, Motif, GTK+ (X11),
+The toolbar is currently available in the Win32, Motif, GTK+ (X11),
 and Photon GUI.  It should turn up in other GUIs in due course.  The
 default toolbar is setup in menu.vim.
 The display of the toolbar is controlled by the 'guioptions' letter 'T'.  You
@@ -856,7 +862,7 @@ The window toolbar uses the ToolbarLine and ToolbarButton highlight groups.
 When splitting the window the window toolbar is not copied to the new window.
 
 							*popup-menu*
-In the Win32, GTK+, Motif, Athena and Photon GUI, you can define the
+In the Win32, GTK+, Motif and Photon GUI, you can define the
 special menu "PopUp".  This is the menu that is displayed when the right mouse
 button is pressed, if 'mousemodel' is set to popup or popup_setpos.
 Example: >

runtime/doc/gui_w32.txt

@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 8.2.  Last change: 2021 Apr 05
+*gui_w32.txt*   For Vim version 8.2.  Last change: 2022 Mar 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -236,7 +236,8 @@ The "* register reflects the contents of the clipboard.  |quotestar|
 
 When the "unnamed" string is included in the 'clipboard' option, the unnamed
 register is the same.  Thus you can yank to and paste from the clipboard
-without prepending "* to commands.
+without prepending "* to commands. If this doesn't work use the "unnamedplus"
+string in the 'clipboard' option.
 
 The 'a' flag in 'guioptions' is not included by default.  This means that text
 is only put on the clipboard when an operation is performed on it.  Just
@@ -323,20 +324,10 @@ These extra colors are also available:
 Gray, Grey, LightYellow, SeaGreen, Orange, Purple, SlateBlue, Violet,
 
 								*rgb.txt*
-Additionally, colors defined by a "rgb.txt" file can be used.  This file is
-well known from X11.  A few lines from it: >
-
-  255 218 185		   peach puff
-  205 133  63		   peru
-  255 181 197		   pink
-
-This shows the layout of the file:  First the R, G and B value as a decimal
-number, followed by the name of the color.  The four fields are separated by
-spaces.
-
-You can get an rgb.txt file from any X11 distribution.  It is located in a
-directory like "/usr/X11R6/lib/X11/".  For Vim it must be located in the
-$VIMRUNTIME directory.  Thus the file can be found with "$VIMRUNTIME/rgb.txt".
+Additionally, colors defined by a default color list can be used.  For more
+info see |:colorscheme|.  These colors used to be defined in
+$VIMRUNTIME/rgb.txt, now they are in |v:colornames| which is initialized from
+$VIMRUNTIME/colors/lists/default.vim.
 
 ==============================================================================
 						*gui-w32-dialogs* *dialog*

runtime/doc/gui_x11.txt

@@ -1,11 +1,11 @@
-*gui_x11.txt*   For Vim version 8.2.  Last change: 2020 Jun 05
+*gui_x11.txt*   For Vim version 8.2.  Last change: 2022 Apr 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
 
 
 Vim's Graphical User Interface				*gui-x11* *GUI-X11*
-							*Athena* *Motif*
+							*Motif*
 1. Starting the X11 GUI		|gui-x11-start|
 2. GUI Resources		|gui-resources|
 3. Shell Commands		|gui-pty|
@@ -64,7 +64,7 @@ flag in 'guioptions'.  |-f|.
 ==============================================================================
 2. GUI Resources			*gui-resources* *.Xdefaults*
 
-If using the Motif or Athena version of the GUI (not for the KDE, GTK+ or Win32
+If using the Motif version of the GUI (not for the KDE, GTK+ or Win32
 version), a number of X resources are available.  You should use Vim's class
 "Vim" when setting these.  They are as follows:
 
@@ -96,7 +96,6 @@ version), a number of X resources are available.  You should use Vim's class
 			is same size as terminal that started it).
     scrollbarWidth	Thickness of scrollbars.
     borderWidth		Thickness of border around text area.
-    menuHeight		Height of the menu bar (only for Athena).
 
 A special font for italic, bold, and italic-bold text will only be used if
 the user has specified one via a resource.  No attempt is made to guess what
@@ -135,12 +134,9 @@ which make Motif applications look even better, highly recommended!
 
 The "Vim*fontList" is to set the menu font for Motif.  Example: >
 	Vim*menuBar*fontList:	     -*-courier-medium-r-*-*-10-*-*-*-*-*-*-*
-With Athena: >
-	Vim*menuBar*SmeBSB*font:     -*-courier-medium-r-*-*-10-*-*-*-*-*-*-*
-	Vim*menuBar*MenuButton*font: -*-courier-medium-r-*-*-10-*-*-*-*-*-*-*
 
 NOTE: A more portable, and indeed more correct, way to specify the menu font
-in either Motif or Athena is through the resource: >
+in Motif is through the resource: >
 	Vim.menuFont:	     -*-courier-medium-r-*-*-10-*-*-*-*-*-*-*
 Or, when compiled with the |+xfontset| feature: >
 	Vim.menuFontSet:     -*-courier-medium-r-*-*-10-*-*-*-*-*-*-*
@@ -255,7 +251,7 @@ For example: >
   :10vmenu File.Print :w !lpr -Php3
 <
 							*X11-icon*
-Vim uses a black&white icon by default when compiled with Motif or Athena.  A
+Vim uses a black&white icon by default when compiled with Motif.  A
 colored Vim icon is included as $VIMRUNTIME/vim32x32.xpm.  For GTK+, this is
 the builtin icon used.  Unfortunately, how you should install it depends on
 your window manager.  When you use this, remove the 'i' flag from
@@ -594,8 +590,7 @@ GTK+ files on your system.  When both GTK+ 2 and GTK+ 3 are available, GTK+ 2
 will be chosen unless --enable-gui=gtk3 is passed explicitly to configure.
 
 If the GTK+ files cannot be found, then the Motif files will be searched for.
-Finally, if this fails, the Athena files will be searched for.  If all three
-fail, the GUI will be disabled.
+If both fail, the GUI will be disabled.
 
 For GTK+, Vim's configuration process uses pkg-config(1) to check if the
 GTK+ required for a specified build is properly installed and usable.
@@ -621,10 +616,10 @@ explicitly to configure, and avoid passing --enable-gnome-check to that, as
 the functionality of the GNOME 2 support has already been consolidated in
 GTK+ 3.
 
-Otherwise, if you are using Motif or Athena, when you have the Motif or Athena
-files in a directory where configure doesn't look, edit the Makefile to enter
-the names of the directories.  Search for "GUI_INC_LOC" for an example to set
-the Motif directories, "CONF_OPT_X" for Athena.
+Otherwise, if you are using Motif, when you have the Motif files in a
+directory where configure doesn't look, edit the Makefile to enter the names
+of the directories.  Search for "GUI_INC_LOC" for an example to set
+the Motif directories.
 
 							*gui-x11-gtk*
 Currently, Vim supports both GTK+ 2 and GTK+ 3.
@@ -643,18 +638,11 @@ few problems, but you might make it compile and run with a bit of work, please
 send me the patches if you do).  The newest releases of LessTif have been
 reported to work fine too.
 
-							*gui-x11-athena*
-The Athena version uses the Xaw widget set by default.  If you have the 3D
-version, you might want to link with Xaw3d instead.  This will make the
-menus look a bit better.  Edit the Makefile and look for "XAW_LIB".  The
-scrollbars will remain the same, because Vim has its own, which are already
-3D (in fact, they look more like Motif).
-
-							*gui-x11-neXtaw*
-The neXtaw version is mostly like Athena, but uses different widgets.
+					    *gui-x11-athena* *gui-x11-neXtaw*
+Support for the Athena GUI and neXtaw was removed in patch 8.2.4677.
 
 							*gui-x11-misc*
-In general, do not try to mix files from different GTK+, Motif, Athena and X11
+In general, do not try to mix files from different GTK+, Motif and X11
 versions.  This will cause problems.  For example, using header files for
 X11R5 with a library for X11R6 probably doesn't work (although the linking
 won't give an error message, Vim will crash later).

runtime/doc/help.txt

@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 8.2.  Last change: 2020 Aug 15
+*help.txt*	For Vim version 8.2.  Last change: 2022 Feb 26
 
 			VIM - main help file
 									 k
@@ -88,6 +88,7 @@ Tuning Vim ~
 |usr_43.txt|  Using filetypes
 |usr_44.txt|  Your own syntax highlighted
 |usr_45.txt|  Select your language
+|usr_46.txt|  Write plugins using Vim9 script
 
 Making Vim Run ~
 |usr_90.txt|  Installing Vim
@@ -132,9 +133,10 @@ Advanced editing ~
 |windows.txt|	commands for using multiple windows and buffers
 |tabpage.txt|	commands for using multiple tab pages
 |spell.txt|	spell checking
-|diff.txt|	working with two to four versions of the same file
+|diff.txt|	working with two to eight versions of the same file
 |autocmd.txt|	automatically executing commands on an event
 |eval.txt|	expression evaluation, conditional commands
+|builtin.txt|	builtin functions
 |channel.txt|	Jobs, Channels, inter-process communication
 |fold.txt|	hide (fold) ranges of lines
 
@@ -145,6 +147,7 @@ Special issues ~
 |term.txt|	using different terminals and mice
 |terminal.txt|	Terminal window support
 |popup.txt|	popup window support
+|vim9.txt|	using Vim9 script
 
 Programming language support ~
 |indent.txt|	automatic indenting for C and other languages
@@ -153,6 +156,8 @@ Programming language support ~
 |filetype.txt|	settings done specifically for a type of file
 |quickfix.txt|	commands for a quick edit-compile-fix cycle
 |ft_ada.txt|	Ada (the programming language) support
+|ft_ps1.txt|	Filetype plugin for Windows PowerShell
+|ft_raku.txt|	Filetype plugin for Raku
 |ft_rust.txt|	Filetype plugin for Rust
 |ft_sql.txt|	about the SQL filetype plugin
 
@@ -192,6 +197,7 @@ Versions ~
 |version6.txt|	Differences between Vim version 5.7 and 6.x
 |version7.txt|	Differences between Vim version 6.4 and 7.x
 |version8.txt|	Differences between Vim version 7.4 and 8.x
+|version9.txt|	Differences between Vim version 8.2 and 9.0
 						*sys-file-list*
 Remarks about specific systems ~
 |os_390.txt|	OS/390 Unix

runtime/doc/helphelp.txt

@@ -1,4 +1,4 @@
-*helphelp.txt*	For Vim version 8.2.  Last change: 2020 Dec 29
+*helphelp.txt*	For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -163,7 +163,7 @@ If you would like to open the help in the current window, see this tip:
 
 The initial height of the help window can be set with the 'helpheight' option
 (default 20).
-
+						*help-buffer-options*
 When the help buffer is created, several local options are set to make sure
 the help text is displayed as it was intended:
     'iskeyword'		nearly all ASCII chars except ' ', '*', '"' and '|'
@@ -224,7 +224,7 @@ command: >
 			dialog.  {only when compiled with |+GUI_GTK|}
 
 					*:helpt* *:helptags*
-				*E154* *E150* *E151* *E152* *E153* *E670*
+				*E150* *E151* *E152* *E153* *E154* *E670*
 :helpt[ags] [++t] {dir}
 			Generate the help tags file(s) for directory {dir}.
 			When {dir} is ALL then all "doc" directories in
@@ -323,21 +323,25 @@ Hints for translators:
 3. Writing help files					*help-writing*
 
 For ease of use, a Vim help file for a plugin should follow the format of the
-standard Vim help files.  If you are writing a new help file it's best to copy
-one of the existing files and use it as a template.
+standard Vim help files, except for the first line.  If you are writing a new
+help file it's best to copy one of the existing files and use it as a
+template.
 
 The first line in a help file should have the following format:
 
-*helpfile_name.txt*	For Vim version 7.3	Last change: 2010 June 4
+*plugin_name.txt*	{short description of the plugin}
 
-The first field is a link to the help file name.  The second field describes
-the applicable Vim version.  The last field specifies the last modification
-date of the file.  Each field is separated by a tab.
+The first field is a help tag where ":help plugin_name" will jump to.  The
+remainder of the line, after a Tab, describes the plugin purpose in a short
+way.  This will show up in the "LOCAL ADDITIONS" section of the main help
+file.  Check there that it shows up properly: |local-additions|.
+
+If you want to add a version number or last modification date, put it in the
+second line, right aligned.
 
 At the bottom of the help file, place a Vim modeline to set the 'textwidth'
 and 'tabstop' options and the 'filetype' to "help".  Never set a global option
-in such a modeline, that can have consequences undesired by whoever reads that
-help.
+in such a modeline, that can have undesired consequences.
 
 
 TAGS

runtime/doc/if_cscop.txt

@@ -1,4 +1,4 @@
-*if_cscop.txt*  For Vim version 8.2.  Last change: 2019 May 05
+*if_cscop.txt*  For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Andy Kahn
@@ -89,7 +89,7 @@ suggested use.)
 ==============================================================================
 2. Cscope related commands				*cscope-commands*
 
-		*:cscope* *:cs* *:scs* *:scscope* *E259* *E262* *E561* *E560*
+		*:cscope* *:cs* *:scs* *:scscope* *E259* *E262* *E560* *E561*
 All cscope commands are accessed through suboptions to the cscope commands.
 	`:cscope` or `:cs` is the main command
 	`:scscope` or `:scs` does the same and splits the window

runtime/doc/if_lua.txt

@@ -1,4 +1,4 @@
-*if_lua.txt*    For Vim version 8.2.  Last change: 2021 Apr 07
+*if_lua.txt*    For Vim version 8.2.  Last change: 2021 Aug 06
 
 
 		  VIM REFERENCE MANUAL    by Luis Carvalho
@@ -175,10 +175,17 @@ Vim evaluation and command execution, and others.
 					:lua print(type(l), vim.type(l))
 					:" list
 <
-	vim.command({cmd})	Executes the vim (ex-mode) command {cmd}.
+	vim.command({cmds})	Executes one or more lines of Ex-mode commands
+				in {cmds}.
 				Examples: >
 					:lua vim.command"set tw=60"
 					:lua vim.command"normal ddp"
+					lua << trim END
+					  vim.command([[
+					      new Myfile.js
+					      call search('start')
+					  ]])
+					END
 <
 	vim.eval({expr})	Evaluates expression {expr} (see |expression|),
 				converts the result to Lua, and returns it.
@@ -211,6 +218,44 @@ Vim evaluation and command execution, and others.
 	vim.lua_version		The Lua version Vim was compiled with, in the
 				form {major}.{minor}.{patch}, e.g. "5.1.4".
 
+	vim.version()		Returns a Lua table with the Vim version.
+				The table will have the following keys:
+					major - major Vim version.
+					minor - minor Vim version.
+					patch - latest patch included.
+
+                                                        *lua-vim-variables*
+The Vim editor global dictionaries |g:| |w:| |b:| |t:| |v:| can be accessed
+from Lua conveniently and idiomatically by referencing the `vim.*` Lua tables
+described below. In this way you can easily read and modify global Vim script
+variables from Lua.
+
+Example: >
+
+    vim.g.foo = 5     -- Set the g:foo Vim script variable.
+    print(vim.g.foo)  -- Get and print the g:foo Vim script variable.
+    vim.g.foo = nil   -- Delete (:unlet) the Vim script variable.
+
+vim.g                                                   *vim.g*
+        Global (|g:|) editor variables.
+        Key with no value returns `nil`.
+
+vim.b                                                   *vim.b*
+        Buffer-scoped (|b:|) variables for the current buffer.
+        Invalid or unset key returns `nil`.
+
+vim.w                                                   *vim.w*
+        Window-scoped (|w:|) variables for the current window.
+        Invalid or unset key returns `nil`.
+
+vim.t                                                   *vim.t*
+        Tabpage-scoped (|t:|) variables for the current tabpage.
+        Invalid or unset key returns `nil`.
+
+vim.v                                                   *vim.v*
+        |v:| variables.
+        Invalid or unset key returns `nil`.
+
 ==============================================================================
 3. List userdata					*lua-list*
 

runtime/doc/if_perl.txt

@@ -1,4 +1,4 @@
-*if_perl.txt*   For Vim version 8.2.  Last change: 2019 Dec 07
+*if_perl.txt*   For Vim version 8.2.  Last change: 2022 Mar 13
 
 
 		  VIM REFERENCE MANUAL    by Sven Verdoolaege
@@ -22,9 +22,9 @@ line of a file, regardless of the filename suffix, to check if a file is a
 Perl script (see scripts.vim in Vim's syntax directory).  Vim assumes a file
 is POD text if the filename has a .POD suffix.
 
-To use tags with Perl, you need a recent version of Exuberant ctags.  Look
-here:
-	http://ctags.sourceforge.net
+To use tags with Perl, you need Universal/Exuberant Ctags.  Look here:
+	Universal Ctags (preferred): https://ctags.io
+	Exuberant Ctags: http://ctags.sourceforge.net
 
 Alternatively, you can use the Perl script pltags.pl, which is shipped with
 Vim in the $VIMRUNTIME/tools directory.  This script has currently more
@@ -103,8 +103,7 @@ Here are some things you can try: >
   :perldo $_ = reverse($_);1
   :perl VIM::Msg("hello")
   :perl $line = $curbuf->Get(42)
-<
-							*E299*
+<							*E299*
 Executing Perl commands in the |sandbox| is limited.  ":perldo" will not be
 possible at all.  ":perl" will be evaluated in the Safe environment, if
 possible.

runtime/doc/if_pyth.txt

@@ -1,4 +1,4 @@
-*if_pyth.txt*   For Vim version 8.2.  Last change: 2019 Dec 07
+*if_pyth.txt*   For Vim version 8.2.  Last change: 2022 Feb 22
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -25,6 +25,10 @@ The Python 3 interface is available only when Vim was compiled with the
 |+python3| feature.
 Both can be available at the same time, but read |python-2-and-3|.
 
+NOTE: Python 2 is old and no longer being developed.  Using Python 3 is highly
+recommended.  Python 2 support will be dropped when it does not work properly
+anymore.
+
 ==============================================================================
 1. Commands						*python-commands*
 
@@ -63,6 +67,11 @@ To see what version of Python you have: >
 
 There is no need to import sys, it's done by default.
 
+							*python-environment*
+Environment variables set in Vim are not always available in Python.  This
+depends on how Vim and Python were built.  Also see
+https://docs.python.org/3/library/os.html#os.environ
+
 Note: Python is very sensitive to the indenting.  Make sure the "class" line
 and "EOF" do not have any indent.
 
@@ -829,6 +838,19 @@ To work around such problems there are these options:
 Raising SystemExit exception in python isn't endorsed way to quit vim, use: >
 	:py vim.command("qall!")
 <
+							*E1266*
+This error can occur when python 3 cannot load the required modules.  This
+means that your python 3 is not correctly installed or there are some mistakes
+in your settings.  Please check the following items:
+1. Make sure that python 3 is correctly installed.  Also check the version of
+   python.
+2. Check the 'pythonthreedll' option.
+3. Check the 'pythonthreehome' option.
+4. Check the PATH environment variable if you don't set 'pythonthreedll'.
+   On MS-Windows, you can use where.exe to check which dll will be loaded.
+   E.g. >
+	where.exe python310.dll
+5. Check the PYTHONPATH and PYTHONHOME environment variables.
 
 							*has-python*
 You can test what Python version is available with: >
@@ -905,7 +927,7 @@ The `:pyxdo` command works similar to `:pydo`.
 							*has-pythonx*
 You can test if pyx* commands are available with: >
 	if has('pythonx')
-	  echo 'pyx* commands are available. (Python ' . &pyx . ')'
+	  echo 'pyx* commands are available. (Python ' .. &pyx .. ')'
 	endif
 
 When compiled with only one of |+python| or |+python3|, the has() returns 1.

runtime/doc/if_tcl.txt

@@ -1,4 +1,4 @@
-*if_tcl.txt*    For Vim version 8.2.  Last change: 2019 Jul 21
+*if_tcl.txt*    For Vim version 8.2.  Last change: 2022 Jan 08
 
 
 		  VIM REFERENCE MANUAL    by Ingo Wilken
@@ -16,21 +16,21 @@ The Tcl Interface to Vim				*tcl* *Tcl* *TCL*
 8. Examples				|tcl-examples|
 9. Dynamic loading			|tcl-dynamic|
 
-*E280*
 {only available when Vim was compiled with the |+tcl| feature}
 
+							*E280*
 WARNING: There are probably still some bugs.  Please send bug reports,
 comments, ideas etc to <Ingo.Wilken@informatik.uni-oldenburg.de>
 
 ==============================================================================
 1. Commands				*tcl-ex-commands* *E571* *E572*
 
-							*:tcl* *:tc*
-:tc[l] {cmd}		Execute Tcl command {cmd}.  A simple check if `:tcl`
+							*:tcl*
+:tcl {cmd}		Execute Tcl command {cmd}.  A simple check if `:tcl`
 			is working: >
 				:tcl puts "Hello"
 
-:[range]tc[l] << [trim] [{endmarker}]
+:[range]tcl << [trim] [{endmarker}]
 {script}
 {endmarker}
 			Execute Tcl script {script}.

runtime/doc/indent.txt

@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 8.2.  Last change: 2019 Dec 07
+*indent.txt*    For Vim version 8.2.  Last change: 2022 Apr 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -42,11 +42,12 @@ is not a C compiler: it does not recognize all syntax.  One requirement is
 that toplevel functions have a '{' in the first column.  Otherwise they are
 easily confused with declarations.
 
-These four options control C program indenting:
+These five options control C program indenting:
 'cindent'	Enables Vim to perform C program indenting automatically.
 'cinkeys'	Specifies which keys trigger reindenting in insert mode.
 'cinoptions'	Sets your preferred indent style.
 'cinwords'	Defines keywords that start an extra indent in the next line.
+'cinscopedecls'	Defines strings that are recognized as a C++ scope declaration.
 
 If 'lisp' is not on and 'equalprg' is empty, the "=" operator indents using
 Vim's built-in algorithm rather than calling an external program.
@@ -293,8 +294,9 @@ The examples below assume a 'shiftwidth' of 4.
 <
 							*cino-g*
 	gN    Place C++ scope declarations N characters from the indent of the
-	      block they are in.  (default 'shiftwidth').  A scope declaration
-	      can be "public:", "protected:" or "private:".
+	      block they are in.  (default 'shiftwidth'). By default, a scope 
+	      declaration is "public:", "protected:" or "private:". This can
+	      be adjusted with the 'cinscopedecls' option.
 
 		cino=		    cino=g0 >
 		  {		      {
@@ -608,26 +610,25 @@ CLOJURE					*ft-clojure-indent* *clojure-indent*
 Clojure indentation differs somewhat from traditional Lisps, due in part to
 the use of square and curly brackets, and otherwise by community convention.
 These conventions are not universally followed, so the Clojure indent script
-offers a few configurable options, listed below.
+offers a few configuration options.
+
+(If the current Vim does not include |searchpairpos()|, the indent script falls
+back to normal 'lisp' indenting, and the following options are ignored.)
 
-If the current vim does not include searchpairpos(), the indent script falls
-back to normal 'lisp' indenting, and the following options are ignored.
 
 							*g:clojure_maxlines*
 
-Set maximum scan distance of searchpairpos(). Larger values trade performance
-for correctness when dealing with very long forms. A value of 0 will scan
-without limits.
->
-	" Default
-	let g:clojure_maxlines = 100
-<
+Sets maximum scan distance of `searchpairpos()`.  Larger values trade
+performance for correctness when dealing with very long forms.  A value of
+0 will scan without limits.  The default is 300.
+
+
 						*g:clojure_fuzzy_indent*
 					*g:clojure_fuzzy_indent_patterns*
 					*g:clojure_fuzzy_indent_blacklist*
 
 The 'lispwords' option is a list of comma-separated words that mark special
-forms whose subforms must be indented with two spaces.
+forms whose subforms should be indented with two spaces.
 
 For example:
 >
@@ -645,15 +646,11 @@ the fuzzy indent feature:
 	let g:clojure_fuzzy_indent_patterns = ['^with', '^def', '^let']
 	let g:clojure_fuzzy_indent_blacklist =
 		\ ['-fn$', '\v^with-%(meta|out-str|loading-context)$']
-
-	" Legacy comma-delimited string version; the list format above is
-	" recommended. Note that patterns are implicitly anchored with ^ and $
-	let g:clojure_fuzzy_indent_patterns = 'with.*,def.*,let.*'
 <
 |g:clojure_fuzzy_indent_patterns| and |g:clojure_fuzzy_indent_blacklist| are
-|Lists| of patterns that will be matched against the unquoted, unqualified
-symbol at the head of a list. This means that a pattern like "^foo" will match
-all these candidates: "foobar", "my.ns/foobar", and "#'foobar".
+lists of patterns that will be matched against the unqualified symbol at the
+head of a list.  This means that a pattern like `"^foo"` will match all these
+candidates: `foobar`, `my.ns/foobar`, and `#'foobar`.
 
 Each candidate word is tested for special treatment in this order:
 
@@ -664,20 +661,22 @@ Each candidate word is tested for special treatment in this order:
 	   |g:clojure_fuzzy_indent_patterns|
 	4. Return false and indent normally otherwise
 
+
 					*g:clojure_special_indent_words*
 
-Some forms in Clojure are indented so that every subform is indented only two
-spaces, regardless of 'lispwords'. If you have a custom construct that should
-be indented in this idiosyncratic fashion, you can add your symbols to the
-default list below.
+Some forms in Clojure are indented such that every subform is indented by only
+two spaces, regardless of 'lispwords'.  If you have a custom construct that
+should be indented in this idiosyncratic fashion, you can add your symbols to
+the default list below.
 >
 	" Default
 	let g:clojure_special_indent_words =
 	   \ 'deftype,defrecord,reify,proxy,extend-type,extend-protocol,letfn'
 <
+
 					*g:clojure_align_multiline_strings*
 
-Align subsequent lines in multiline strings to the column after the opening
+Align subsequent lines in multi-line strings to the column after the opening
 quote, instead of the same column.
 
 For example:
@@ -694,11 +693,7 @@ For example:
 	   enim ad minim veniam, quis nostrud exercitation ullamco laboris
 	   nisi ut aliquip ex ea commodo consequat.")
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_multiline_strings = 0
-<
+
 						*g:clojure_align_subforms*
 
 By default, parenthesized compound forms that look like function calls and
@@ -709,18 +704,14 @@ two spaces relative to the opening paren:
 	  bar
 	  baz)
 <
-Setting this option changes this behavior so that all subforms are aligned to
-the same column, emulating the default behavior of clojure-mode.el:
+Setting this option to `1` changes this behaviour so that all subforms are
+aligned to the same column, emulating the default behaviour of
+clojure-mode.el:
 >
 	(foo
 	 bar
 	 baz)
 <
-This option is off by default.
->
-	" Default
-	let g:clojure_align_subforms = 0
-<
 
 FORTRAN							*ft-fortran-indent*
 
@@ -789,6 +780,15 @@ You can set the indent for the first line after <script> and <style>
       "auto"	auto indent (same indent as the blocktag)
       "inc"	auto indent + one indent step
 
+You can set the indent for attributes after an open <tag line: >
+
+      :let g:html_indent_attribute = 1
+<
+      VALUE	MEANING ~
+      1		auto indent, one indent step more than <tag
+      2		auto indent, two indent steps (default)
+      > 2	auto indent, more indent steps
+
 Many tags increase the indent for what follows per default (see "Add Indent
 Tags" in the script).  You can add further tags with: >
 
@@ -890,7 +890,7 @@ For example, with N = 1, this will give:
 							*PHP_outdentphpescape*
 To indent PHP escape tags as the surrounding non-PHP code (only affects the
 PHP escape tags): >
-:let g:PHP_outdentphpescape = 0
+    :let g:PHP_outdentphpescape = 0
 -------------
 
 							*PHP_removeCRwhenUnix*
@@ -1217,7 +1217,7 @@ comments will be indented according to the correctly indented code.
 
 
 VIM							*ft-vim-indent*
-
+							*g:vim_indent_cont*
 For indenting Vim scripts there is one variable that specifies the amount of
 indent for a continuation line, a line that starts with a backslash: >
 

runtime/doc/index.txt

@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.2.  Last change: 2021 Apr 24
+*index.txt*     For Vim version 8.2.  Last change: 2022 Mar 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -168,6 +168,7 @@ commands in CTRL-X submode				*i_CTRL-X_index*
 |i_CTRL-X_CTRL-Y|	CTRL-X CTRL-Y	scroll down
 |i_CTRL-X_CTRL-U|	CTRL-X CTRL-U	complete with 'completefunc'
 |i_CTRL-X_CTRL-V|	CTRL-X CTRL-V	complete like in : command line
+|i_CTRL-X_CTRL-Z|	CTRL-X CTRL-Z	stop completion, keeping the text as-is
 |i_CTRL-X_CTRL-]|	CTRL-X CTRL-]	complete tags
 |i_CTRL-X_s|		CTRL-X s	spelling suggestions
 
@@ -864,6 +865,8 @@ tag		char	      note action in Normal mode	~
 |zm|		zm		   subtract one from 'foldlevel'
 |zn|		zn		   reset 'foldenable'
 |zo|		zo		   open fold
+|zp|		zp		   paste in block-mode without trailing spaces
+|zP|		zP		   paste in block-mode without trailing spaces
 |zr|		zr		   add one to 'foldlevel'
 |zs|		zs		   when 'wrap' off scroll horizontally to
 				   position the cursor at the start (left
@@ -876,6 +879,7 @@ tag		char	      note action in Normal mode	~
 |zv|		zv		   open enough folds to view the cursor line
 |zw|		zw		   permanently mark word as incorrectly spelled
 |zx|		zx		   re-apply 'foldlevel' and do "zv"
+|zy|		zy		   yank without trailing spaces
 |zz|		zz		   redraw, cursor line at center of window
 |z<Left>|	z<Left>		   same as "zh"
 |z<Right>|	z<Right>	   same as "zl"
@@ -933,7 +937,9 @@ tag		command	      note action in Visual mode	~
 				   before the highlighted area
 |v_J|		J		2  join the highlighted lines
 |v_K|		K		   run 'keywordprg' on the highlighted area
-|v_O|		O		   Move horizontally to other corner of area.
+|v_O|		O		   move horizontally to other corner of area
+|v_P|		P		   replace highlighted area with register
+				   contents; unnamed register is unchanged
 		Q		   does not start Ex mode
 |v_R|		R		2  delete the highlighted lines and start
 				   insert
@@ -996,6 +1002,8 @@ tag		command	      note action in Visual mode	~
 |v_i{|		i{		   same as iB
 |v_i}|		i}		   same as iB
 |v_o|		o		   move cursor to other corner of area
+|v_p|		p		   replace highlighted area with register
+				   contents; deleted text in unnamed register
 |v_r|		r		2  replace highlighted area with a character
 |v_s|		s		2  delete highlighted area and start insert
 |v_u|		u		2  make highlighted area lowercase
@@ -1144,7 +1152,7 @@ tag		command		action ~
 |:&|		:&		repeat last ":substitute"
 |:star|		:*		execute contents of a register
 |:<|		:<		shift lines one 'shiftwidth' left
-|:=|		:=		print the cursor line number
+|:=|		:=		print the last line number
 |:>|		:>		shift lines one 'shiftwidth' right
 |:@|		:@		execute contents of a register
 |:@@|		:@@		repeat the previous ":@"
@@ -1162,6 +1170,7 @@ tag		command		action ~
 				be remapped
 |:args|		:ar[gs]		print the argument list
 |:argadd|	:arga[dd]	add items to the argument list
+|:argdedupe|	:argded[upe]	remove duplicates from the argument list
 |:argdelete|	:argd[elete]	delete items from the argument list
 |:argedit|	:arge[dit]	add item to the argument list and edit it
 |:argdo|	:argdo		do a command on all items in the argument list
@@ -1309,6 +1318,7 @@ tag		command		action ~
 |:endtry|	:endt[ry]	end previous :try
 |:endwhile|	:endw[hile]	end previous :while
 |:enew|		:ene[w]		edit a new, unnamed buffer
+|:eval|		:ev[al]		evaluate an expression and discard the result
 |:ex|		:ex		same as ":edit"
 |:execute|	:exe[cute]	execute result of expressions
 |:exit|		:exi[t]		same as ":xit"
@@ -1657,9 +1667,9 @@ tag		command		action ~
 |:tab|		:tab		create new tab when opening new window
 |:tag|		:ta[g]		jump to tag
 |:tags|		:tags		show the contents of the tag stack
-|:tcd|		:tcd		change directory for tab page
+|:tcd|		:tc[d]		change directory for tab page
 |:tchdir|	:tch[dir]	change directory for tab page
-|:tcl|		:tc[l]		execute Tcl command
+|:tcl|		:tcl		execute Tcl command
 |:tcldo|	:tcld[o]	execute Tcl command for each line
 |:tclfile|	:tclf[ile]	execute Tcl script file
 |:tearoff|	:te[aroff]	tear-off a menu

runtime/doc/insert.txt

@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 8.2.  Last change: 2020 Oct 16
+*insert.txt*    For Vim version 8.2.  Last change: 2022 Apr 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -84,6 +84,8 @@ CTRL-U		Delete all entered characters before the cursor in the current
 		line.  If there are no newly entered characters and
 		'backspace' is not empty, delete all characters before the
 		cursor in the current line.
+		If C-indenting is enabled the indent will be adjusted if the
+		line becomes blank.
 		See |i_backspacing| about joining lines.
 						*i_CTRL-I* *i_<Tab>* *i_Tab*
 <Tab> or CTRL-I Insert a tab.  If the 'expandtab' option is on, the
@@ -270,7 +272,7 @@ CTRL-]		Trigger abbreviation, without inserting a character.
 
 						*i_backspacing*
 The effect of the <BS>, CTRL-W, and CTRL-U depend on the 'backspace' option
-(unless 'revins' is set).  This is a comma separated list of items:
+(unless 'revins' is set).  This is a comma-separated list of items:
 
 item	    action ~
 indent	    allow backspacing over autoindent
@@ -281,8 +283,8 @@ start	    allow backspacing over the start position of insert; CTRL-W and
 When 'backspace' is empty, Vi compatible backspacing is used.  You cannot
 backspace over autoindent, before column 1 or before where insert started.
 
-For backwards compatibility the values "0", "1" and "2" are also allowed, see
-|'backspace'|.
+For backwards compatibility the values "0", "1", "2" and "3" are also allowed,
+see |'backspace'|.
 
 If the 'backspace' option does contain "eol" and the cursor is in column 1
 when one of the three keys is used, the current line is joined with the
@@ -640,6 +642,8 @@ Completion can be done for:
 12. Spelling suggestions				|i_CTRL-X_s|
 13. keywords in 'complete'				|i_CTRL-N| |i_CTRL-P|
 
+Additionally, |i_CTRL-X_CTRL-Z| stops completion without changing the text.
+
 All these, except CTRL-N and CTRL-P, are done in CTRL-X mode.  This is a
 sub-mode of Insert and Replace modes.  You enter CTRL-X mode by typing CTRL-X
 and one of the CTRL-X commands.  You exit CTRL-X mode by typing a key that is
@@ -796,7 +800,7 @@ If the previous expansion was split, because it got longer than 'textwidth',
 then just the text in the current line will be used.
 
 If the match found is at the end of a line, then the first word in the next
-line will be inserted and the message "word from next line" displayed, if
+line will be inserted and the message "Word from other line" displayed, if
 this word is accepted the next CTRL-X CTRL-P or CTRL-X CTRL-N will search
 for those lines starting with this word.
 
@@ -814,6 +818,7 @@ CTRL-X CTRL-K		Search the files given with the 'dictionary' option
 			the 'dictionary' option is empty.
 			For suggestions where to find a list of words, see the
 			'dictionary' option.
+			'ignorecase', 'smartcase' and 'infercase' apply.
 
 	CTRL-K	or
 	CTRL-N		Search forward for next matching keyword.  This
@@ -822,6 +827,9 @@ CTRL-X CTRL-K		Search the files given with the 'dictionary' option
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+
+Completing words in 'thesaurus'				*compl-thesaurus*
+
 							*i_CTRL-X_CTRL-T*
 CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			the 'thesaurus' option instead of 'dictionary'.  If a
@@ -830,16 +838,6 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 			matches, even though they don't complete the word.
 			Thus a word can be completely replaced.
 
-			For an example, imagine the 'thesaurus' file has a
-			line like this: >
-				angry furious mad enraged
-<			Placing the cursor after the letters "ang" and typing
-			CTRL-X CTRL-T would complete the word "angry";
-			subsequent presses would change the word to "furious",
-			"mad" etc.
-			Other uses include translation between two languages,
-			or grouping API functions by keyword.
-
 	CTRL-T	or
 	CTRL-N		Search forward for next matching keyword.  This
 			keyword replaces the previous matching keyword.
@@ -847,6 +845,57 @@ CTRL-X CTRL-T		Works as CTRL-X CTRL-K, but in a special way.  It uses
 	CTRL-P		Search backwards for next matching keyword.  This
 			keyword replaces the previous matching keyword.
 
+In the file used by the 'thesaurus' option each line in the file should
+contain words with similar meaning, separated by non-keyword characters (white
+space is preferred).  Maximum line length is 510 bytes.
+
+For an example, imagine the 'thesaurus' file has a line like this: >
+	angry furious mad enraged
+Placing the cursor after the letters "ang" and typing CTRL-X CTRL-T would
+complete the word "angry"; subsequent presses would change the word to
+"furious", "mad" etc.
+
+Other uses include translation between two languages, or grouping API
+functions by keyword.
+
+An English word list was added to this github issue:
+https://github.com/vim/vim/issues/629#issuecomment-443293282
+Unpack thesaurus_pkg.zip, put the thesaurus.txt file somewhere, e.g.
+~/.vim/thesaurus/english.txt, and the 'thesaurus' option to this file name.
+
+
+Completing keywords with 'thesaurusfunc'		*compl-thesaurusfunc*
+
+If the 'thesaurusfunc' option is set, then the user specified function is
+invoked to get the list of completion matches and the 'thesaurus' option is
+not used. See |complete-functions| for an explanation of how the function is
+invoked and what it should return.
+
+Here is an example that uses the "aiksaurus" command (provided by Magnus
+Groß): >
+
+    func Thesaur(findstart, base)
+      if a:findstart
+    	return searchpos('\<', 'bnW', line('.'))[1] - 1
+      endif
+      let res = []
+      let h = ''
+      for l in systemlist('aiksaurus ' .. shellescape(a:base))
+	if l[:3] == '=== '
+	  let h = '(' .. substitute(l[4:], ' =*$', ')', '')
+	elseif l ==# 'Alphabetically similar known words are: '
+	  let h = "\U0001f52e"
+	elseif l[0] =~ '\a' || (h ==# "\U0001f52e" && l[0] ==# "\t")
+	  call extend(res, map(split(substitute(l, '^\t', '', ''), ', '), {_, val -> {'word': val, 'menu': h}}))
+	endif
+      endfor
+      return res
+    endfunc
+    
+    if exists('+thesaurusfunc')
+      set thesaurusfunc=Thesaur
+    endif
+
 
 Completing keywords in the current and included files	*compl-keyword*
 
@@ -1042,9 +1091,15 @@ CTRL-P			Find previous match for words that start with the
 			other contexts unless a double CTRL-X is used.
 
 
+Stop completion						*compl-stop*
+
+							*i_CTRL-X_CTRL-Z*
+CTRL-X CTRL-Z		Stop completion without changing the text.
+
+
 FUNCTIONS FOR FINDING COMPLETIONS			*complete-functions*
 
-This applies to 'completefunc' and 'omnifunc'.
+This applies to 'completefunc', 'thesaurusfunc' and 'omnifunc'.
 
 The function is called in two different ways:
 - First the function is called to find the start of the text to be completed.
@@ -1073,7 +1128,8 @@ On the second invocation the arguments are:
 
 The function must return a List with the matching words.  These matches
 usually include the "a:base" text.  When there are no matches return an empty
-List.
+List.  Note that the cursor may have moved since the first invocation, the
+text may have been changed.
 
 In order to return more information than the matching words, return a Dict
 that contains the List.  The Dict can have these items:
@@ -1140,7 +1196,7 @@ three lines, but 'previewheight' is used when it has a value of 1 or 2.
 						*complete-popup*
 When "popup" is in 'completeopt' a popup window is used to display the "info".
 Then the 'completepopup' option specifies the properties of the popup.  This
-is used when the info popup is created.  The option is a comma separated list
+is used when the info popup is created.  The option is a comma-separated list
 of values:
 	height		maximum height of the popup
 	width		maximum width of the popup
@@ -1193,7 +1249,7 @@ match to the total list.  These matches should then not appear in the returned
 list!  Call |complete_check()| now and then to allow the user to press a key
 while still searching for matches.  Stop searching when it returns non-zero.
 
-							*E839* *E840*
+							*E840*
 The function is allowed to move the cursor, it is restored afterwards.
 The function is not allowed to move to another window or delete text.
 
@@ -1211,7 +1267,7 @@ An example that completes the names of the months: >
 	    " find months matching with "a:base"
 	    let res = []
 	    for m in split("Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec")
-	      if m =~ '^' . a:base
+	      if m =~ '^' .. a:base
 		call add(res, m)
 	      endif
 	    endfor
@@ -1233,7 +1289,7 @@ The same, but now pretending searching for matches is slow: >
 	  else
 	    " find months matching with "a:base"
 	    for m in split("Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec")
-	      if m =~ '^' . a:base
+	      if m =~ '^' .. a:base
 		call complete_add(m)
 	      endif
 	      sleep 300m	" simulate searching for next match
@@ -1353,11 +1409,16 @@ in 'runtimepath'.  Thus for "java" it is autoload/javacomplete.vim.
 
 C							*ft-c-omni*
 
-Completion of C code requires a tags file.  You should use Exuberant ctags,
-because it adds extra information that is needed for completion.  You can find
-it here: http://ctags.sourceforge.net/  Version 5.6 or later is recommended.
+Completion of C code requires a tags file.  You should use Universal/
+Exuberant ctags, because it adds extra information that is needed for
+completion.  You can find it here:
+	Universal Ctags: https://ctags.io
+	Exuberant Ctags: http://ctags.sourceforge.net
 
-For version 5.5.4 you should add a patch that adds the "typename:" field:
+Universal Ctags is preferred, Exuberant Ctags is no longer being developed.
+
+For Exuberant ctags, version 5.6 or later is recommended.  For version 5.5.4
+you should add a patch that adds the "typename:" field:
 	ftp://ftp.vim.org/pub/vim/unstable/patches/ctags-5.5.4.patch
 A compiled .exe for MS-Windows can be found at:
 	http://ctags.sourceforge.net/
@@ -1478,8 +1539,11 @@ will be suggested. All other elements are not placed in suggestion list.
 PHP							*ft-php-omni*
 
 Completion of PHP code requires a tags file for completion of data from
-external files and for class aware completion. You should use Exuberant ctags
-version 5.5.4 or newer. You can find it here: http://ctags.sourceforge.net/
+external files and for class aware completion. You should use Universal/
+Exuberant ctags version 5.5.4 or newer. You can find it here:
+
+	Universal Ctags: https://ctags.io
+	Exuberant Ctags: http://ctags.sourceforge.net
 
 Script completes:
 
@@ -1892,6 +1956,9 @@ When 'autoindent' is on, the indent for a new line is obtained from the
 previous line.  When 'smartindent' or 'cindent' is on, the indent for a line
 is automatically adjusted for C programs.
 
+'formatoptions' can be set to copy the comment leader when opening a new
+line.
+
 'textwidth' can be set to the maximum width for a line.  When a line becomes
 too long when appending characters a line break is automatically inserted.
 
@@ -1905,6 +1972,9 @@ too long when appending characters a line break is automatically inserted.
 			inserted after the current line.
 			Adding [!] toggles 'autoindent' for the time this
 			command is executed.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 							*:i* *:in* *:insert*
 :{range}i[nsert][!]	Insert several lines of text above the specified
@@ -1912,6 +1982,9 @@ too long when appending characters a line break is automatically inserted.
 			inserted before the current line.
 			Adding [!] toggles 'autoindent' for the time this
 			command is executed.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 These two commands will keep on asking for lines, until you type a line
 containing only a ".".  Watch out for lines starting with a backslash, see

runtime/doc/intro.txt

@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 8.2.  Last change: 2020 Dec 29
+*intro.txt*     For Vim version 8.2.  Last change: 2022 Apr 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -213,7 +213,7 @@ Vim would never have become what it is now, without the help of these people!
 	Daniel Elstner		GTK+ 2 port
 	Eric Fischer		Mac port, 'cindent', and other improvements
 	Benji Fisher		Answering lots of user questions
-	Bill Foster		Athena GUI port
+	Bill Foster		Athena GUI port (later removed)
 	Google			Lets me work on Vim one day a week
 	Loic Grenie		xvim (ideas for multi windows version)
 	Sven Guckes		Vim promoter and previous WWW page maintainer
@@ -421,7 +421,6 @@ notation	meaning		    equivalent	decimal value(s)	~
 <Tab>		tab			CTRL-I	  9	*tab* *Tab*
 							*linefeed*
 <NL>		linefeed		CTRL-J	 10 (used for <Nul>)
-<FF>		formfeed		CTRL-L	 12	*formfeed*
 <CR>		carriage return		CTRL-M	 13	*carriage-return*
 <Return>	same as <CR>				*<Return>*
 <Enter>		same as <CR>				*<Enter>*
@@ -702,7 +701,8 @@ Q			Switch to "Ex" mode.  This is a bit like typing ":"
 			Use the ":vi" command |:visual| to exit "Ex" mode.
 			Note: In older versions of Vim "Q" formatted text,
 			that is now done with |gq|.  But if you use the
-			|vimrc_example.vim| script "Q" works like "gq".
+			|vimrc_example.vim| script or |defaults.vim|, "Q"
+			works like "gq".  Except for Select mode.
 
 					*gQ*
 gQ			Switch to "Ex" mode like with "Q", but really behave

runtime/doc/map.txt

@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 8.2.  Last change: 2021 May 16
+*map.txt*       For Vim version 8.2.  Last change: 2022 Apr 03
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -6,7 +6,7 @@
 
 Key mapping, abbreviations and user-defined commands.
 
-This subject is introduced in sections |05.3|, |24.7| and |40.1| of the user
+This subject is introduced in sections |05.4|, |24.7| and |40.1| of the user
 manual.
 
 1. Key mapping			|key-mapping|
@@ -61,6 +61,8 @@ modes.
 			where the map command applies.  The result, including
 			{rhs}, is then further scanned for mappings.  This
 			allows for nested and recursive use of mappings.
+			Note: Trailing spaces are included in the {rhs},
+			because space is a valid Normal mode command.
 
 						*:nore* *:norem*
 :no[remap]  {lhs} {rhs}		|mapmode-nvo|	*:no*  *:noremap* *:nor*
@@ -78,6 +80,8 @@ modes.
 			where the map command applies.  Disallow mapping of
 			{rhs}, to avoid nested and recursive mappings.  Often
 			used to redefine a command.
+			Note: When <Plug> appears in the {rhs} this part is
+			always applied even if remapping is disallowed.
 
 
 :unm[ap]  {lhs}			|mapmode-nvo|		*:unm*  *:unmap*
@@ -94,6 +98,8 @@ modes.
 			Remove the mapping of {lhs} for the modes where the
 			map command applies.  The mapping may remain defined
 			for other modes where it applies.
+			It also works when {lhs} matches the {rhs} of a
+			mapping. This is for when an abbreviation applied.
 			Note: Trailing spaces are included in the {lhs}.  This
 			unmap does NOT work: >
 				:map @@ foo
@@ -168,7 +174,7 @@ type "a", then "bar" will get inserted.
 "<unique>" can be used in any order.  They must appear right after the
 command, before any other arguments.
 
-				*:map-local* *:map-<buffer>* *E224* *E225*
+			*:map-local* *:map-<buffer>* *:map-buffer* *E224* *E225*
 If the first argument to one of these commands is "<buffer>" the mapping will
 be effective in the current buffer only.  Example: >
 	:map <buffer>  ,w  /[.,;]<CR>
@@ -227,7 +233,7 @@ Note: ":map <script>" and ":noremap <script>" do the same thing.  The
 "<script>" overrules the command name.  Using ":noremap <script>" is
 preferred, because it's clearer that remapping is (mostly) disabled.
 
-						*:map-<unique>* *E226* *E227*
+				*:map-<unique>* *:map-unique* *E226* *E227*
 If the first argument to one of these commands is "<unique>" and it is used to
 define a new mapping or abbreviation, the command will fail if the mapping or
 abbreviation already exists.  Example: >
@@ -266,7 +272,7 @@ input. Example: >
 	endfunc
 	nnoremap <expr> <F3> <SID>OpenPopup()
 
-Also, keep in mind that the expression may be evaluated when looking for
+Keep in mind that the expression may be evaluated when looking for
 typeahead, before the previous command has been executed.  For example: >
 	func StoreColumn()
 	  let g:column = col('.')
@@ -280,6 +286,10 @@ This can be solved by inserting <Ignore> before the character that is
 expression-mapped: >
 	nmap ! f!<Ignore>x
 
+When defining a mapping in a |Vim9| script, the expression will be evaluated
+in the context of that script.  This means that script-local items can be
+accessed in the expression.
+
 Be very careful about side effects!  The expression is evaluated while
 obtaining characters, you may very well make the command dysfunctional.
 For this reason the following is blocked:
@@ -306,7 +316,7 @@ Here is an example that inserts a list number that increases: >
 
 	func ListItem()
 	  let g:counter += 1
-	  return g:counter . '. '
+	  return g:counter .. '. '
 	endfunc
 
 	func ListReset()
@@ -338,30 +348,48 @@ Example of using <Cmd> halfway Insert mode: >
 Unlike <expr> mappings, there are no special restrictions on the <Cmd>
 command: it is executed as if an (unrestricted) |autocommand| was invoked.
 
+						*<ScriptCmd>*
+<ScriptCmd> is like <Cmd> but sets the context to the script the mapping was
+defined in, for the duration of the command execution.  This is especially
+useful for |Vim9| script.  It also works to access an import, which is useful
+in a plugin using an autoload script: >
+	vim9script
+	import autoload 'implementation.vim' as impl
+	nnoremap <F4> <ScriptCmd>impl.DoTheWork()<CR>
+
+No matter where <F4> is typed, the "impl" import will be found in the script
+context of where the mapping was defined.  And since it's an autoload import,
+the "implementation.vim" script will only be loaded once <F4> is typed, not
+when the mapping is defined.
+
 Note:
-- Because <Cmd> avoids mode-changes it does not trigger |CmdlineEnter| and
-  |CmdlineLeave| events, because no user interaction is expected.
+- Because <Cmd> and <ScriptCmd> avoid mode-changes it does not trigger
+  |CmdlineEnter| and |CmdlineLeave| events, because no user interaction is
+  expected.
 - For the same reason, |keycodes| like <C-R><C-W> are interpreted as plain,
   unmapped keys.
 - The command is not echo'ed, no need for <silent>.
+- The {rhs} is not subject to abbreviations nor to other mappings, even if the
+  mapping is recursive.
 - In Visual mode  you can use `line('v')` and `col('v')` to get one end of the
   Visual area, the cursor is at the other end.
 - In Select mode, |:map| and |:vmap| command mappings are executed in
   Visual mode.  Use |:smap| to handle Select mode differently.
 
-							*E1135* *E1136*
-<Cmd> commands must terminate, that is, they must be followed by <CR> in the
-{rhs} of the mapping definition.  |Command-line| mode is never entered.
+							*E1255* *E1136*
+<Cmd> and <ScriptCmd> commands must terminate, that is, they must be followed
+by <CR> in the {rhs} of the mapping definition.  |Command-line| mode is never
+entered.
 
 							*E1137*
-<Cmd> commands can have only normal characters and cannot contain special
-characters like function keys.
+<Cmd> and <ScriptCmd> commands can have only normal characters and cannot
+contain special characters like function keys.
 
 
 1.3 MAPPING AND MODES					*:map-modes*
 			*mapmode-nvo* *mapmode-n* *mapmode-v* *mapmode-o*
 
-There are six sets of mappings
+There are seven sets of mappings
 - For Normal mode: When typing commands.
 - For Visual mode: When typing commands while the Visual area is highlighted.
 - For Select mode: like Visual mode but typing text replaces the selection.
@@ -369,6 +397,7 @@ There are six sets of mappings
   etc.).  See below: |omap-info|.
 - For Insert mode.  These are also used in Replace mode.
 - For Command-line mode: When entering a ":" or "/" command.
+- For Terminal mode: When typing in a |:terminal| buffer.
 
 Special case: While typing a count for a command in Normal mode, mapping zero
 is disabled.  This makes it possible to map zero without making it impossible
@@ -668,6 +697,10 @@ The special key name "<Plug>" can be used for an internal mapping, which is
 not to be matched with any key sequence.  This is useful in plugins
 |using-<Plug>|.
 
+							*<MouseMove>*
+The special key name "<MouseMove>" can be used to handle mouse movement.  It
+needs to be enabled with 'mousemoveevent'.  Currently only works in the GUI.
+
 							*<Char>* *<Char->*
 To map a character by its decimal, octal or hexadecimal number the <Char>
 construct can be used:
@@ -955,8 +988,7 @@ g@{motion}		Call the function set by the 'operatorfunc' option.
 			    "line"	{motion} was |linewise|
 			    "char"	{motion} was |characterwise|
 			    "block"	{motion} was |blockwise-visual|
-			Although "block" would rarely appear, since it can
-			only result from Visual mode where "g@" is not useful.
+			The type can be forced, see |forced-motion|.
 			{not available when compiled without the |+eval|
 			feature}
 
@@ -967,28 +999,56 @@ Here is an example that counts the number of spaces with <F4>: >
 	" doubling <F4> works on a line
 	nnoremap <expr> <F4><F4> CountSpaces() .. '_'
 
-	function CountSpaces(type = '') abort
+	function CountSpaces(context = {}, type = '') abort
 	  if a:type == ''
-	    set opfunc=CountSpaces
+	    let context = #{
+	      \ dot_command: v:false,
+	      \ extend_block: '',
+	      \ virtualedit: [&l:virtualedit, &g:virtualedit],
+	      \ }
+	    let &operatorfunc = function('CountSpaces', [context])
+	    set virtualedit=block
 	    return 'g@'
- 	  endif
+	  endif
 
-	  let sel_save = &selection
-	  let reg_save = getreginfo('"')
-	  let cb_save = &clipboard
-	  let visual_marks_save = [getpos("'<"), getpos("'>")]
+	  let save = #{
+	    \ clipboard: &clipboard,
+	    \ selection: &selection,
+	    \ virtualedit: [&l:virtualedit, &g:virtualedit],
+	    \ register: getreginfo('"'),
+	    \ visual_marks: [getpos("'<"), getpos("'>")],
+	    \ }
 
 	  try
-	    set clipboard= selection=inclusive
-	    let commands = #{line: "'[V']y", char: "`[v`]y", block: "`[\<c-v>`]y"}
-	    silent exe 'noautocmd keepjumps normal! ' .. get(commands, a:type, '')
-	    echom getreg('"')->count(' ')
+	    set clipboard= selection=inclusive virtualedit=
+	    let commands = #{
+	      \ line: "'[V']",
+	      \ char: "`[v`]",
+	      \ block: "`[\<C-V>`]",
+	      \ }[a:type]
+	    let [_, _, col, off] = getpos("']")
+	    if off != 0
+	      let vcol = getline("'[")->strpart(0, col + off)->strdisplaywidth()
+	      if vcol >= [line("'["), '$']->virtcol() - 1
+	        let a:context.extend_block = '$'
+	      else
+	        let a:context.extend_block = vcol .. '|'
+	      endif
+	    endif
+	    if a:context.extend_block != ''
+	      let commands ..= 'oO' .. a:context.extend_block
+	    endif
+	    let commands ..= 'y'
+	    execute 'silent noautocmd keepjumps normal! ' .. commands
+	    echomsg getreg('"')->count(' ')
 	  finally
-	    call setreg('"', reg_save)
-	    call setpos("'<", visual_marks_save[0])
-	    call setpos("'>", visual_marks_save[1])
-	    let &clipboard = cb_save
-	    let &selection = sel_save
+	    call setreg('"', save.register)
+	    call setpos("'<", save.visual_marks[0])
+	    call setpos("'>", save.visual_marks[1])
+	    let &clipboard = save.clipboard
+	    let &selection = save.selection
+	    let [&l:virtualedit, &g:virtualedit] = get(a:context.dot_command ? save : a:context, 'virtualedit')
+	    let a:context.dot_command = v:true
 	  endtry
 	endfunction
 
@@ -1004,6 +1064,20 @@ Also note that the 'clipboard' option is temporarily emptied to avoid
 clobbering the `"*` or `"+` registers, if its value contains the item `unnamed`
 or `unnamedplus`.
 
+The `mode()` function will return the state as it will be after applying the
+operator.
+
+Here is an example for using a lambda function to create a normal-mode
+operator to add quotes around text in the current line: >
+
+	nnoremap <F4> <Cmd>let &opfunc='{t ->
+				\ getline(".")
+				\ ->split("\\zs")
+				\ ->insert("\"", col("'']"))
+				\ ->insert("\"", col("''[") - 1)
+				\ ->join("")
+				\ ->setline(".")}'<CR>g@
+
 ==============================================================================
 2. Abbreviations			*abbreviations* *Abbreviations*
 
@@ -1344,7 +1418,7 @@ scripts.
 
 							*:command-verbose*
 When 'verbose' is non-zero, listing a command will also display where it was
-last defined. Example: >
+last defined and any completion argument. Example: >
 
     :verbose command TOhtml
 <	Name	    Args Range Complete  Definition ~
@@ -1368,12 +1442,16 @@ See |:verbose-cmd| for more information.
 :delc[ommand] {cmd}				*:delc* *:delcommand* *E184*
 			Delete the user-defined command {cmd}.
 
+:delc[ommand] -buffer {cmd}					*E1237*
+			Delete the user-defined command {cmd} that was defined
+			for the current buffer.
+
 :comc[lear]						*:comc* *:comclear*
 			Delete all user-defined commands.
 
 
 Command attributes ~
-
+                                                       *command-attributes*
 User-defined commands are treated by Vim just like any other Ex commands.  They
 can have arguments, or have a range specified.  Arguments are subject to
 completion as filenames, buffers, etc.  Exactly how this works depends upon the
@@ -1459,6 +1537,8 @@ completion can be enabled:
 	-complete=custom,{func} custom completion, defined via {func}
 	-complete=customlist,{func} custom completion, defined via {func}
 
+If you specify completion while there is nothing to complete (-nargs=0, the
+default) then you get error *E1208* .
 Note: That some completion methods might expand environment variables.
 
 
@@ -1488,9 +1568,11 @@ The function arguments are:
 The function may use these for determining context.  For the "custom"
 argument, it is not necessary to filter candidates against the (implicit
 pattern in) ArgLead.  Vim will filter the candidates with its regexp engine
-after function return, and this is probably more efficient in most cases. For
-the "customlist" argument, Vim will not filter the returned completion
-candidates and the user supplied function should filter the candidates.
+after function return, and this is probably more efficient in most cases. If
+'wildoptions' contains "fuzzy", then the candidates will be filtered using
+|fuzzy-matching|.  For the "customlist" argument, Vim will not
+filter the returned completion candidates and the user supplied function
+should filter the candidates.
 
 The following example lists user names to a Finger command >
     :com -complete=custom,ListUsers -nargs=1 Finger !finger <args>
@@ -1553,6 +1635,7 @@ Possible values are (second column is the short name used in listing):
 Special cases ~
 					*:command-bang* *:command-bar*
 					*:command-register* *:command-buffer*
+					*:command-keepscript*
 There are some special cases as well:
 
 	-bang	    The command can take a ! modifier (like :q or :w)
@@ -1562,6 +1645,9 @@ There are some special cases as well:
 	-register   The first argument to the command can be an optional
 		    register name (like :del, :put, :yank).
 	-buffer	    The command will only be available in the current buffer.
+	-keepscript Do not use the location of where the user command was
+		    defined for verbose messages, use the location of where
+		    the user command was invoked.
 
 In the cases of the -count and -register attributes, if the optional argument
 is supplied, it is removed from the argument list and is available to the
@@ -1571,6 +1657,20 @@ feature.  Use the full name for new scripts.
 
 
 Replacement text ~
+							*:command-repl*
+The {repl} argument is normally one long string, possibly with "|" separated
+commands.  A special case is when the argument is "{", then the following
+lines, up to a line starting with "}" are used and |Vim9| syntax applies.
+Example: >
+	:command MyCommand {
+		echo 'hello'
+		g:calledMyCommand = true
+	    }
+<							*E1231*
+There must be white space before the "{".  No nesting is supported, inline
+functions cannot be used.  Commands where a "|" may appear in the argument,
+such as commands with an expression argument, cannot be followed by a "|" and
+another command.
 
 The replacement text {repl} for a user defined command is scanned for special
 escape sequences, using <...> notation.  Escape sequences are replaced with
@@ -1606,12 +1706,12 @@ The valid escape sequences are
 		Examples: >
 		    command! -nargs=+ -complete=file MyEdit
 				\ for f in expand(<q-args>, 0, 1) |
-				\ exe '<mods> split ' . f |
+				\ exe '<mods> split ' .. f |
 				\ endfor
 
 		    function! SpecialEdit(files, mods)
 			for f in expand(a:files, 0, 1)
-			    exe a:mods . ' split ' . f
+			    exe a:mods .. ' split ' .. f
 			endfor
 		    endfunction
 		    command! -nargs=+ -complete=file Sedit
@@ -1687,7 +1787,7 @@ This will invoke: >
    :   let i = 0
    :   while i < argc()
    :	  if filereadable(argv(i))
-   :	     execute "e " . argv(i)
+   :	     execute "e " .. argv(i)
    :	     execute a:command
    :      endif
    :      let i = i + 1

runtime/doc/mbyte.txt

@@ -1,4 +1,4 @@
-*mbyte.txt*     For Vim version 8.2.  Last change: 2021 Apr 05
+*mbyte.txt*     For Vim version 8.2.  Last change: 2022 Apr 03
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar et al.
@@ -702,7 +702,7 @@ USING RESOURCE FILES
 Instead of specifying 'guifontset', you can set X11 resources and Vim will
 pick them up.  This is only for people who know how X resource files work.
 
-For Motif and Athena insert these three lines in your $HOME/.Xdefaults file:
+For Motif insert these three lines in your $HOME/.Xdefaults file:
 
 	Vim.font: |base_font_name_list|
 	Vim*fontSet: |base_font_name_list|
@@ -862,8 +862,8 @@ Use the RPM or port for your system.
     window specific to the input method.
 
 
-USING XIM			*multibyte-input* *E284* *E286* *E287* *E288*
-				*E285* *E289*
+USING XIM			*multibyte-input* *E284* *E285* *E286* *E287*
+					*E288* *E289*
 
 Note that Display and Input are independent.  It is possible to see your
 language even though you have no input method for it.  But when your Display
@@ -955,32 +955,11 @@ replace mode.
 The options 'iminsert', 'imsearch' and 'imcmdline' can be used to choose
 the different input methods or disable them temporarily.
 
-WHAT IS IME
-    IME is a part of East asian version Windows.  That helps you to input
-    multibyte character.  English and other language version Windows does not
-    have any IME.  (Also there is no need usually.) But there is one that
-    called Microsoft Global IME.  Global IME is a part of Internet Explorer
-    4.0 or above.  You can get more information about Global IME, at below
-    URL.
-
-WHAT IS GLOBAL IME					*global-ime*
-    Global IME makes capability to input Chinese, Japanese, and Korean text
-    into Vim buffer on any language version of Windows 98, Windows 95, and
-    Windows NT 4.0.
-    On Windows 2000 and XP it should work as well (without downloading).  On
-    Windows 2000 Professional, Global IME is built in, and the Input Locales
-    can be added through Control Panel/Regional Options/Input Locales.
-    Please see below URL for detail of Global IME.  You can also find various
-    language version of Global IME at same place.
-
-    - Global IME detailed information.
-	http://search.microsoft.com/results.aspx?q=global+ime
-
-    - Active Input Method Manager (Global IME)
+On Windows 9x and Windows NT 4.0 there was *global-ime* , but this is no
+longer supported.  You can still find documentation for Active Input Method
+Manager (Global IME) here:
 	http://msdn.microsoft.com/en-us/library/aa741221(v=VS.85).aspx
 
-    Support for Global IME is an experimental feature.
-
 NOTE: For IME to work you must make sure the input locales of your language
 are added to your system.  The exact location of this depends on the version
 of Windows you use.  For example, on my Windows 2000 box:
@@ -1132,7 +1111,7 @@ This file explains what characters are available in UTF-8 and CP1255 encodings,
 and what the keymaps are to get those characters:
 
 glyph   encoding	   keymap ~
-Char   utf-8 cp1255  hebrew  hebrewp  name ~
+Char UTF-8 cp1255  hebrew  hebrewp  name ~
 א    0x5d0  0xe0     t	      a     'alef
 ב    0x5d1  0xe1     c	      b     bet
 ג    0x5d2  0xe2     d	      g     gimel
@@ -1185,11 +1164,11 @@ Vowel marks and special punctuation:
 ױ    0x5f1  0xd5     VY      VY   vav-yod
 ײ    0x5f2  0xd6     YY      YY   yod-yod
 
-The following are only available in utf-8
+The following are only available in UTF-8
 
 Cantillation marks:
 glyph
-Char utf-8 hebrew name
+Char UTF-8 hebrew name
 ב֑    0x591   C:   etnahta
 ב֒    0x592   Cs   segol
 ב֓    0x593   CS   shalshelet
@@ -1300,8 +1279,8 @@ ASCII.   On MS-Windows UTF-16 is also used (previously UCS-2), which uses
 internally.
 
 Vim has comprehensive UTF-8 support.  It works well in:
-- xterm with utf-8 support enabled
-- Athena, Motif and GTK GUI
+- xterm with UTF-8 support enabled
+- Motif and GTK GUI
 - MS-Windows GUI
 - several other platforms
 
@@ -1313,13 +1292,13 @@ is no longer relevant in the GTK+ 2 GUI.
 							*bom-bytes*
 When reading a file a BOM (Byte Order Mark) can be used to recognize the
 Unicode encoding:
-	EF BB BF     utf-8
-	FE FF        utf-16 big endian
-	FF FE        utf-16 little endian
-	00 00 FE FF  utf-32 big endian
-	FF FE 00 00  utf-32 little endian
+	EF BB BF     UTF-8
+	FE FF        UTF-16 big endian
+	FF FE        UTF-16 little endian
+	00 00 FE FF  UTF-32 big endian
+	FF FE 00 00  UTF-32 little endian
 
-Utf-8 is the recommended encoding.  Note that it's difficult to tell utf-16
+UTF-8 is the recommended encoding.  Note that it's difficult to tell utf-16
 and utf-32 apart.  Utf-16 is often used on MS-Windows, utf-32 is not
 widespread as file format.
 
@@ -1365,8 +1344,8 @@ Useful commands:
 
 STARTING VIM
 
-If your current locale is in an utf-8 encoding, Vim will automatically start
-in utf-8 mode.
+If your current locale is in an UTF-8 encoding, Vim will automatically start
+in UTF-8 mode.
 
 If you are using another locale: >
 
@@ -1399,10 +1378,10 @@ Motif.  Use the ":hi Menu font={fontname}" command for this. |:highlight|
 TYPING UTF-8						*utf-8-typing*
 
 If you are using X-Windows, you should find an input method that supports
-utf-8.
+UTF-8.
 
-If your system does not provide support for typing utf-8, you can use the
-'keymap' feature.  This allows writing a keymap file, which defines a utf-8
+If your system does not provide support for typing UTF-8, you can use the
+'keymap' feature.  This allows writing a keymap file, which defines a UTF-8
 character as a sequence of ASCII characters.  See |mbyte-keymap|.
 
 Another method is to set the current locale to the language you want to use

runtime/doc/message.txt

@@ -1,4 +1,4 @@
-*message.txt*   For Vim version 8.2.  Last change: 2020 Dec 29
+*message.txt*   For Vim version 8.2.  Last change: 2022 Jan 26
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -29,8 +29,7 @@ depends on the 'shortmess' option.
 				Clear messages, keeping only the {count} most
 				recent ones.
 
-The number of remembered messages is fixed at 20 for the tiny version and 200
-for other versions.
+The number of remembered messages is fixed at 200.
 
 								*g<*
 The "g<" command can be used to see the last page of previous command output.
@@ -47,13 +46,13 @@ maintains the messages or the translations.  You can use this to contact the
 maintainer when you spot a mistake.
 
 If you want to find help on a specific (error) message, use the ID at the
-start of the message.  For example, to get help on the message: >
+start of the message.  For example, to get help on the message:
 
-	E72: Close error on swap file
+	E72: Close error on swap file ~
 
-or (translated): >
+or (translated):
 
-	E72: Errore durante chiusura swap file
+	E72: Errore durante chiusura swap file ~
 
 Use: >
 
@@ -63,6 +62,8 @@ If you are lazy, it also works without the shift key: >
 
 	:help e72
 
+The number in this ID has no meaning.
+
 ==============================================================================
 2. Error messages				*error-messages* *errors*
 
@@ -77,111 +78,116 @@ See `:messages` above.
 LIST OF MESSAGES
 			*E222* *E228* *E232* *E293* *E298* *E304* *E317*
 			*E318* *E356* *E438* *E439* *E440* *E316* *E320* *E322*
-			*E323* *E341* *E473* *E570* *E685* *E292*  >
-  Add to read buffer
-  makemap: Illegal mode
-  Cannot create BalloonEval with both message and callback
-  Hangul automata ERROR
-  block was not locked
-  Didn't get block nr {N}?
-  ml_upd_block0(): Didn't get block 0??
-  pointer block id wrong {N}
-  Updated too many blocks?
-  get_varp ERROR
-  u_undo: line numbers wrong
-  undo list corrupt
-  undo line missing
-  ml_get: cannot find line {N}
-  cannot find line {N}
-  line number out of range: {N} past the end
-  line count wrong in block {N}
-  Internal error
-  Internal error: {function}
-  fatal error in cs_manage_matches
-  Invalid count for del_bytes(): {N}
+			*E323* *E341* *E473* *E570* *E685* *E292* 
+  Add to read buffer ~
+  makemap: Illegal mode ~
+  Cannot create BalloonEval with both message and callback ~
+  block was not locked ~
+  Didn't get block nr {N}? ~
+  ml_upd_block0(): Didn't get block 0?? ~
+  pointer block id wrong {N} ~
+  Updated too many blocks? ~
+  get_varp ERROR ~
+  u_undo: line numbers wrong ~
+  undo list corrupt ~
+  undo line missing ~
+  ml_get: cannot find line {N} in buffer {nr} {name} ~
+  line number out of range: {N} past the end ~
+  line count wrong in block {N} ~
+  Internal error: lalloc(0, ) ~
+  Internal error: {function} ~
+  Internal error in regexp ~
+  fatal error in cs_manage_matches ~
+  Invalid count for del_bytes(): {N} ~
 
 This is an internal error.  If you can reproduce it, please send in a bug
 report. |bugs|
 
->
-  ATTENTION
-  Found a swap file by the name ...
+
+  ATTENTION ~
+  Found a swap file by the name ... ~
 
 See |ATTENTION|.
 
-							*E92*  >
-  Buffer {N} not found
+							*E92* 
+  Buffer {N} not found ~
 
 The buffer you requested does not exist.  This can also happen when you have
 wiped out a buffer which contains a mark or is referenced in another way.
 |:bwipeout|
 
-							*E95*  >
-  Buffer with this name already exists
+							*E95* 
+  Buffer with this name already exists ~
 
-You cannot have two buffers with the same name.
+You cannot have two buffers with exactly the same name.  This includes the
+path leading to the file.
 
-							*E72*  >
-  Close error on swap file
+							*E72* 
+  Close error on swap file ~
 
 The |swap-file|, that is used to keep a copy of the edited text, could not be
 closed properly.  Mostly harmless.
 
-							*E169*  >
-  Command too recursive
+							*E169* 
+  Command too recursive ~
 
 This happens when an Ex command executes an Ex command that executes an Ex
 command, etc.  The limit is 200 or the value of 'maxfuncdepth', whatever is
 larger.  When it's more there probably is an endless loop.  Probably a
 |:execute| or |:source| command is involved.
 
-							*E254*  >
-  Cannot allocate color {name}
+							*E254* 
+  Cannot allocate color {name} ~
 
 The color name {name} is unknown.  See |gui-colors| for a list of colors that
 are available on most systems.
 
-							*E458*  >
-  Cannot allocate colormap entry, some colors may be incorrect
+							*E1244* 
+  Bad color string: {str} ~
+
+The provided color did not conform to the pattern #rrggbb
+
+							*E458* 
+  Cannot allocate colormap entry, some colors may be incorrect ~
 
 This means that there are not enough colors available for Vim.  It will still
 run, but some of the colors will not appear in the specified color.  Try
 stopping other applications that use many colors, or start them after starting
 gvim.
 Browsers are known to consume a lot of colors.  You can avoid this with
-netscape by telling it to use its own colormap: >
-	netscape -install
-Or tell it to limit to a certain number of colors (64 should work well): >
-	netscape -ncols 64
-This can also be done with a line in your Xdefaults file: >
-	Netscape*installColormap: Yes
-or >
-	Netscape*maxImageColors:  64
-<
-							*E79*  >
-  Cannot expand wildcards
+netscape by telling it to use its own colormap:
+	netscape -install ~
+Or tell it to limit to a certain number of colors (64 should work well):
+	netscape -ncols 64 ~
+This can also be done with a line in your Xdefaults file:
+	Netscape*installColormap: Yes ~
+or
+	Netscape*maxImageColors:  64 ~
+
+							*E79* 
+  Cannot expand wildcards ~
 
 A filename contains a strange combination of characters, which causes Vim to
 attempt expanding wildcards but this fails.  This does NOT mean that no
 matching file names could be found, but that the pattern was illegal.
 
-							*E459*  >
-  Cannot go back to previous directory
+							*E459* 
+  Cannot go back to previous directory ~
 
 While expanding a file name, Vim failed to go back to the previously used
 directory.  All file names being used may be invalid now!  You need to have
 execute permission on the current directory.
 
-							*E190* *E212*  >
-  Cannot open "{filename}" for writing
-  Can't open file for writing
+							*E190* *E212* 
+  Cannot open "{filename}" for writing ~
+  Can't open file for writing ~
 
 For some reason the file you are writing to cannot be created or overwritten.
 The reason could be that you do not have permission to write in the directory
 or the file name is not valid.
 
-							*E166*  >
-  Can't open linked file for writing
+							*E166* 
+  Can't open linked file for writing ~
 
 You are trying to write to a file which can't be overwritten, and the file is
 a link (either a hard link or a symbolic link).  Writing might still be
@@ -192,20 +198,20 @@ place.  If you really want to write the file under this name, you have to
 manually delete the link or the file, or change the permissions so that Vim
 can overwrite.
 
-							*E46*  >
-  Cannot change read-only variable "{name}"
+							*E46* 
+  Cannot change read-only variable "{name}" ~
 
 You are trying to assign a value to an argument of a function |a:var| or a Vim
 internal variable |v:var| which is read-only.
 
-							*E90*  >
-  Cannot unload last buffer
+							*E90* 
+  Cannot unload last buffer ~
 
 Vim always requires one buffer to be loaded, otherwise there would be nothing
 to display in the window.
 
-							*E40*  >
-  Can't open errorfile <filename>
+							*E40* 
+  Can't open errorfile <filename> ~
 
 When using the ":make" or ":grep" commands: The file used to save the error
 messages or grep output cannot be opened.  This can have several causes:
@@ -217,8 +223,8 @@ messages or grep output cannot be opened.  This can have several causes:
 - The 'grepprg' or 'makeprg' could not be executed.  This cannot always be
   detected (especially on MS-Windows).  Check your $PATH.
 
- >
-  Can't open file C:\TEMP\VIoD243.TMP
+ 
+  Can't open file C:\TEMP\VIoD243.TMP ~
 
 On MS-Windows, this message appears when the output of an external command was
 to be read, but the command didn't run successfully.  This can be caused by
@@ -226,21 +232,21 @@ many things.  Check the 'shell', 'shellquote', 'shellxquote', 'shellslash' and
 related options.  It might also be that the external command was not found,
 there is no different error message for that.
 
-							*E12*  >
-  Command not allowed from exrc/vimrc in current dir or tag search
+							*E12* 
+  Command not allowed from exrc/vimrc in current dir or tag search ~
 
 Some commands are not allowed for security reasons.  These commands mostly
 come from a .exrc or .vimrc file in the current directory, or from a tags
 file.  Also see 'secure'.
 
-							*E74*  >
-  Command too complex
+							*E74* 
+  Command too complex ~
 
 A mapping resulted in a very long command string.  Could be caused by a
 mapping that indirectly calls itself.
 
->
-  CONVERSION ERROR
+
+  CONVERSION ERROR ~
 
 When writing a file and the text "CONVERSION ERROR" appears, this means that
 some bits were lost when converting text from the internally used UTF-8 to the
@@ -252,51 +258,51 @@ If there is a backup file, when 'writebackup' or 'backup' is set, it will not
 be deleted, so you can move it back into place if you want to discard the
 changes.
 
-							*E302*  >
-  Could not rename swap file
+							*E302* 
+  Could not rename swap file ~
 
 When the file name changes, Vim tries to rename the |swap-file| as well.
 This failed and the old swap file is now still used.  Mostly harmless.
 
-							*E43* *E44*  >
-  Damaged match string
-  Corrupted regexp program
+							*E43* *E44* 
+  Damaged match string ~
+  Corrupted regexp program ~
 
 Something inside Vim went wrong and resulted in a corrupted regexp.  If you
 know how to reproduce this problem, please report it. |bugs|
 
-							*E208* *E209* *E210*  >
-  Error writing to "{filename}"
-  Error closing "{filename}"
-  Error reading "{filename}"
+							*E208* *E209* *E210* 
+  Error writing to "{filename}" ~
+  Error closing "{filename}" ~
+  Error reading "{filename}" ~
 
 This occurs when Vim is trying to rename a file, but a simple change of file
 name doesn't work.  Then the file will be copied, but somehow this failed.
 The result may be that both the original file and the destination file exist
 and the destination file may be incomplete.
 
->
-  Vim: Error reading input, exiting...
+
+  Vim: Error reading input, exiting... ~
 
 This occurs when Vim cannot read typed characters while input is required.
 Vim got stuck, the only thing it can do is exit.  This can happen when both
 stdin and stderr are redirected and executing a script that doesn't exit Vim.
 
-							*E47*  >
-  Error while reading errorfile
+							*E47* 
+  Error while reading errorfile ~
 
 Reading the error file was not possible.  This is NOT caused by an error
 message that was not recognized.
 
-							*E80*  >
-  Error while writing
+							*E80* 
+  Error while writing ~
 
 Writing a file was not completed successfully.  The file is probably
 incomplete.
 
-							*E13* *E189*  >
-  File exists (add ! to override)
-  "{filename}" exists (add ! to override)
+							*E13* *E189* 
+  File exists (add ! to override) ~
+  "{filename}" exists (add ! to override) ~
 
 You are protected from accidentally overwriting a file.  When you want to
 write anyway, use the same command, but add a "!" just after the command.
@@ -305,8 +311,8 @@ Example: >
 changes to: >
 	:w! /tmp/test
 <
-							*E768*  >
-  Swap file exists: {filename} (:silent! overrides)
+							*E768* 
+  Swap file exists: {filename} (:silent! overrides) ~
 
 You are protected from overwriting a file that is being edited by Vim.  This
 happens when you use ":w! filename" and a swapfile is found.
@@ -318,115 +324,115 @@ happens when you use ":w! filename" and a swapfile is found.
 < The special command is needed, since you already added the ! for overwriting
   an existing file.
 
-							*E139*  >
-  File is loaded in another buffer
+							*E139* 
+  File is loaded in another buffer ~
 
 You are trying to write a file under a name which is also used in another
 buffer.  This would result in two versions of the same file.
 
-							*E142*  >
-  File not written: Writing is disabled by 'write' option
+							*E142* 
+  File not written: Writing is disabled by 'write' option ~
 
 The 'write' option is off.  This makes all commands that try to write a file
 generate this message.  This could be caused by a |-m| commandline argument.
 You can switch the 'write' option on with ":set write".
 
-							*E25*  >
-  GUI cannot be used: Not enabled at compile time
+							*E25* 
+  GUI cannot be used: Not enabled at compile time ~
 
 You are running a version of Vim that doesn't include the GUI code.  Therefore
 "gvim" and ":gui" don't work.
 
-							*E49*  >
-  Invalid scroll size
+							*E49* 
+  Invalid scroll size ~
 
 This is caused by setting an invalid value for the 'scroll', 'scrolljump' or
 'scrolloff' options.
 
-							*E17*  >
-  "{filename}" is a directory
+							*E17* 
+  "{filename}" is a directory ~
 
 You tried to write a file with the name of a directory.  This is not possible.
 You probably need to append a file name.
 
-							*E19*  >
-  Mark has invalid line number
+							*E19* 
+  Mark has invalid line number ~
 
 You are using a mark that has a line number that doesn't exist.  This can
 happen when you have a mark in another file, and some other program has
 deleted lines from it.
 
-							*E219* *E220*  >
-  Missing {.
-  Missing }.
+							*E219* *E220* 
+  Missing {. ~
+  Missing }. ~
 
 Using a {} construct in a file name, but there is a { without a matching } or
 the other way around.  It should be used like this: {foo,bar}.  This matches
 "foo" and "bar".
 
-							*E315*  >
-  ml_get: invalid lnum: {number}
+							*E315* 
+  ml_get: invalid lnum: {number} ~
 
 This is an internal Vim error.  Please try to find out how it can be
 reproduced, and submit a bug report |bugreport.vim|.
 
-							*E173*  >
-  {number} more files to edit
+							*E173* 
+  {number} more files to edit ~
 
 You are trying to exit, while the last item in the argument list has not been
 edited.  This protects you from accidentally exiting when you still have more
 files to work on.  See |argument-list|.  If you do want to exit, just do it
 again and it will work.
 
-							*E23* *E194*  >
-  No alternate file
-  No alternate file name to substitute for '#'
+							*E23* *E194* 
+  No alternate file ~
+  No alternate file name to substitute for '#' ~
 
 The alternate file is not defined yet.  See |alternate-file|.
 
-							*E32*  >
-  No file name
+							*E32* 
+  No file name ~
 
 The current buffer has no name.  To write it, use ":w fname".  Or give the
 buffer a name with ":file fname".
 
-							*E141*  >
-  No file name for buffer {number}
+							*E141* 
+  No file name for buffer {number} ~
 
 One of the buffers that was changed does not have a file name.  Therefore it
 cannot be written.  You need to give the buffer a file name: >
 	:buffer {number}
 	:file {filename}
 <
-							*E33*  >
-  No previous substitute regular expression
+							*E33* 
+  No previous substitute regular expression ~
 
 When using the '~' character in a pattern, it is replaced with the previously
 used pattern in a ":substitute" command.  This fails when no such command has
 been used yet.  See |/~|.  This also happens when using ":s/pat/%/", where the
 "%" stands for the previous substitute string.
 
-							*E35*  >
-  No previous regular expression
+							*E35* 
+  No previous regular expression ~
 
 When using an empty search pattern, the previous search pattern is used.  But
 that is not possible if there was no previous search.
 
-							*E24*  >
-  No such abbreviation
+							*E24* 
+  No such abbreviation ~
 
 You have used an ":unabbreviate" command with an argument which is not an
 existing abbreviation.  All variations of this command give the same message:
 ":cunabbrev", ":iunabbrev", etc.  Check for trailing white space.
 
->
-  /dev/dsp: No such file or directory
+
+  /dev/dsp: No such file or directory ~
 
 Only given for GTK GUI with Gnome support.  Gnome tries to use the audio
 device and it isn't present.  You can ignore this error.
 
-							*E31*  >
-  No such mapping
+							*E31*
+  No such mapping ~
 
 You have used an ":unmap" command with an argument which is not an existing
 mapping.  All variations of this command give the same message: ":cunmap",
@@ -435,9 +441,9 @@ mapping.  All variations of this command give the same message: ":cunmap",
 - If the mapping is buffer-local you need to use ":unmap <buffer>".
   |:map-<buffer>|
 
-							*E37* *E89*  >
-  No write since last change (add ! to override)
-  No write since last change for buffer {N} (add ! to override)
+							*E37* *E89* 
+  No write since last change (add ! to override) ~
+  No write since last change for buffer {N} (add ! to override) ~
 
 You are trying to |abandon| a file that has changes.  Vim protects you from
 losing your work.  You can either write the changed file with ":w", or, if you
@@ -447,8 +453,8 @@ adding a '!' character just after the command you used.  Example: >
 changes to: >
 	:e! other_file
 <
-							*E162*  >
-  No write since last change for buffer "{name}"
+							*E162* 
+  No write since last change for buffer "{name}" ~
 
 This appears when you try to exit Vim while some buffers are changed.  You
 will either have to write the changed buffer (with |:w|), or use a command to
@@ -456,23 +462,23 @@ abandon the buffer forcefully, e.g., with ":qa!".  Careful, make sure you
 don't throw away changes you really want to keep.  You might have forgotten
 about a buffer, especially when 'hidden' is set.
 
->
-  [No write since last change]
+
+  [No write since last change] ~
 
 This appears when executing a shell command while at least one buffer was
 changed.  To avoid the message reset the 'warn' option.
 
-							*E38*  >
-  Null argument
+							*E38* 
+  Null argument ~
 
 Something inside Vim went wrong and resulted in a NULL pointer.  If you know
 how to reproduce this problem, please report it. |bugs|
 
-						*E41* *E82* *E83* *E342*  >
-  Out of memory!
-  Out of memory!  (allocating {number} bytes)
-  Cannot allocate any buffer, exiting...
-  Cannot allocate buffer, using other one...
+						*E41* *E82* *E83* *E342* 
+  Out of memory! ~
+  Out of memory!  (allocating {number} bytes) ~
+  Cannot allocate any buffer, exiting... ~
+  Cannot allocate buffer, using other one... ~
 
 Oh, oh.  You must have been doing something complicated, or some other program
 is consuming your memory.  Be careful!  Vim is not completely prepared for an
@@ -490,16 +496,16 @@ in memory, you can reduce that with these options:
   helps for a change that affects all lines.
 - 'undoreload' Set to zero to disable.
 
-							*E339*  >
-  Pattern too long
+							*E339* 
+  Pattern too long ~
 
 This happens on systems with 16 bit ints: The compiled regexp pattern is
 longer than about 65000 characters.  Try using a shorter pattern.
 It also happens when the offset of a rule doesn't fit in the space available.
 Try simplifying the pattern.
 
-							*E45*  >
-  'readonly' option is set (add ! to override)
+							*E45* 
+  'readonly' option is set (add ! to override) ~
 
 You are trying to write a file that was marked as read-only.  To write the
 file anyway, either reset the 'readonly' option, or add a '!' character just
@@ -508,18 +514,18 @@ after the command you used.  Example: >
 changes to: >
 	:w!
 <
-							*E294* *E295* *E301*  >
-  Read error in swap file
-  Seek error in swap file read
-  Oops, lost the swap file!!!
+							*E294* *E295* *E301* 
+  Read error in swap file ~
+  Seek error in swap file read ~
+  Oops, lost the swap file!!! ~
 
 Vim tried to read text from the |swap-file|, but something went wrong.  The
 text in the related buffer may now be corrupted!  Check carefully before you
 write a buffer.  You may want to write it in another file and check for
 differences.
 
-							*E192*  >
-  Recursive use of :normal too deep
+							*E192* 
+  Recursive use of :normal too deep ~
 
 You are using a ":normal" command, whose argument again uses a ":normal"
 command in a recursive way.  This is restricted to 'maxmapdepth' levels.  This
@@ -527,16 +533,16 @@ example illustrates how to get this message: >
 	:map gq :normal gq<CR>
 If you type "gq", it will execute this mapping, which will call "gq" again.
 
-							*E22*  >
-  Scripts nested too deep
+							*E22* 
+  Scripts nested too deep ~
 
-Scripts can be read with the "-s" command-line argument and with the ":source"
-command.  The script can then again read another script.  This can continue
-for about 14 levels.  When more nesting is done, Vim assumes that there is a
-recursive loop somewhere and stops with this error message.
+Scripts can be read with the "-s" command-line argument and with the
+`:source!` command.  The script can then again read another script.  This can
+continue for about 14 levels.  When more nesting is done, Vim assumes that
+there is a recursive loop and stops with this error message.
 
-							*E319*  >
-  Sorry, the command is not available in this version
+							*E319* 
+  Sorry, the command is not available in this version ~
 
 You have used a command that is not present in the version of Vim you are
 using.  When compiling Vim, many different features can be enabled or
@@ -544,8 +550,8 @@ disabled.  This depends on how big Vim has chosen to be and the operating
 system.  See |+feature-list| for when which feature is available.  The
 |:version| command shows which feature Vim was compiled with.
 
-							*E300*  >
-  Swap file already exists (symlink attack?)
+							*E300* 
+  Swap file already exists (symlink attack?) ~
 
 This message appears when Vim is trying to open a swap file and finds it
 already exists or finds a symbolic link in its place.  This shouldn't happen,
@@ -554,8 +560,8 @@ opened the same file at exactly the same moment (very unlikely) or someone is
 attempting a symlink attack (could happen when editing a file in /tmp or when
 'directory' starts with "/tmp", which is a bad choice).
 
-							*E432*  >
-  Tags file not sorted: {file name}
+							*E432* 
+  Tags file not sorted: {file name} ~
 
 Vim (and Vi) expect tags files to be sorted in ASCII order.  Binary searching
 can then be used, which is a lot faster than a linear search.  If your tags
@@ -564,21 +570,21 @@ This message is only given when Vim detects a problem when searching for a
 tag.  Sometimes this message is not given, even though the tags file is not
 properly sorted.
 
-							*E424*  >
-  Too many different highlighting attributes in use
+							*E424* 
+  Too many different highlighting attributes in use ~
 
 Vim can only handle about 223 different kinds of highlighting.  If you run
 into this limit, you have used too many |:highlight| commands with different
 arguments.  A ":highlight link" is not counted.
 
-							*E77*  >
-  Too many file names
+							*E77* 
+  Too many file names ~
 
 When expanding file names, more than one match was found.  Only one match is
 allowed for the command that was used.
 
-							*E303*  >
-  Unable to open swap file for "{filename}", recovery impossible
+							*E303* 
+  Unable to open swap file for "{filename}", recovery impossible ~
 
 Vim was not able to create a swap file.  You can still edit the file, but if
 Vim unexpectedly exits the changes will be lost.  And Vim may consume a lot of
@@ -586,25 +592,25 @@ memory when editing a big file.  You may want to change the 'directory' option
 to avoid this error.  This error is not given when 'directory' is empty.  See
 |swap-file|.
 
-							*E140*  >
-  Use ! to write partial buffer
+							*E140* 
+  Use ! to write partial buffer ~
 
 When using a range to write part of a buffer, it is unusual to overwrite the
 original file.  It is probably a mistake (e.g., when Visual mode was active
 when using ":w"), therefore Vim requires using a !  after the command, e.g.:
 ":3,10w!".
->
 
-  Warning: Cannot convert string "<Key>Escape,_Key_Cancel" to type
-  VirtualBinding
+
+  Warning: Cannot convert string "<Key>Escape,_Key_Cancel" to type ~
+  VirtualBinding ~
 
 Messages like this appear when starting up.  This is not a Vim problem, your
 X11 configuration is wrong.  You can find a hint on how to solve this here:
 http://groups.yahoo.com/group/solarisonintel/message/12179.
 [this URL is no longer valid]
 
-							*W10*  >
-  Warning: Changing a readonly file
+							*W10* 
+  Warning: Changing a readonly file ~
 
 The file is read-only and you are making a change to it anyway.  You can use
 the |FileChangedRO| autocommand event to avoid this message (the autocommand
@@ -612,15 +618,15 @@ must reset the 'readonly' option).  See 'modifiable' to completely disallow
 making changes to a file.
 This message is only given for the first change after 'readonly' has been set.
 
-							*W13*  >
-  Warning: File "{filename}" has been created after editing started
+							*W13* 
+  Warning: File "{filename}" has been created after editing started ~
 
 You are editing a file in Vim when it didn't exist, but it does exist now.
 You will have to decide if you want to keep the version in Vim or the newly
 created file.  This message is not given when 'buftype' is not empty.
 
-							*W11*  >
-  Warning: File "{filename}" has changed since editing started
+							*W11* 
+  Warning: File "{filename}" has changed since editing started ~
 
 The file which you have started editing has got another timestamp and the
 contents changed (more precisely: When reading the file again with the current
@@ -643,15 +649,15 @@ starts.  It can be fixed in one of these ways:
 If you get W11 all the time, you may need to disable "Acronis Active
 Protection" or register Vim as a trusted service/application.
 
-							*W12*  >
-  Warning: File "{filename}" has changed and the buffer was changed in Vim as well
+							*W12* 
+  Warning: File "{filename}" has changed and the buffer was changed in Vim as well ~
 
 Like the above, and the buffer for the file was changed in this Vim as well.
 You will have to decide if you want to keep the version in this Vim or the one
 on disk.  This message is not given when 'buftype' is not empty.
 
-							*W16*  >
-  Warning: Mode of file "{filename}" has changed since editing started
+							*W16* 
+  Warning: Mode of file "{filename}" has changed since editing started ~
 
 When the timestamp for a buffer was changed and the contents are still the
 same but the mode (permissions) have changed.  This usually occurs when
@@ -659,37 +665,37 @@ checking out a file from a version control system, which causes the read-only
 bit to be reset.  It should be safe to reload the file.  Set 'autoread' to
 automatically reload the file.
 
-							*E211*  >
-  File "{filename}" no longer available
+							*E211* 
+  File "{filename}" no longer available ~
 
 The file which you have started editing has disappeared, or is no longer
 accessible.  Make sure you write the buffer somewhere to avoid losing
 changes.  This message is not given when 'buftype' is not empty.
 
-							*W14*  >
-  Warning: List of file names overflow
+							*W14* 
+  Warning: List of file names overflow ~
 
 You must be using an awful lot of buffers.  It's now possible that two buffers
 have the same number, which causes various problems.  You might want to exit
 Vim and restart it.
 
-							*E931*  >
-  Buffer cannot be registered
+							*E931* 
+  Buffer cannot be registered ~
 
 Out of memory or a duplicate buffer number.  May happen after W14.  Looking up
 a buffer will not always work, better restart Vim.
 
-							*E296* *E297*  >
-  Seek error in swap file write
-  Write error in swap file
+							*E296* *E297* 
+  Seek error in swap file write ~
+  Write error in swap file ~
 
 This mostly happens when the disk is full.  Vim could not write text into the
 |swap-file|.  It's not directly harmful, but when Vim unexpectedly exits some
 text may be lost without recovery being possible.  Vim might run out of memory
 when this problem persists.
 
-						*connection-refused*  >
-  Xlib: connection to "<machine-name:0.0" refused by server
+						*connection-refused* 
+  Xlib: connection to "<machine-name:0.0" refused by server ~
 
 This happens when Vim tries to connect to the X server, but the X server does
 not allow a connection.  The connection to the X server is needed to be able
@@ -697,54 +703,56 @@ to restore the title and for the xterm clipboard support.  Unfortunately this
 error message cannot be avoided, except by disabling the |+xterm_clipboard|
 and |+X11| features.
 
-							*E10*  >
-  \\ should be followed by /, ? or &
+							*E10* 
+  \\ should be followed by /, ? or & ~
 
 A command line started with a backslash or the range of a command contained a
 backslash in a wrong place.  This is often caused by command-line continuation
 being disabled.  Remove the 'C' flag from the 'cpoptions' option to enable it.
 Or use ":set nocp".
 
-							*E471*  >
-  Argument required
+							*E471* 
+  Argument required ~
 
 This happens when an Ex command with mandatory argument(s) was executed, but
 no argument has been specified.
 
-							*E474* *E475* *E983*  >
-  Invalid argument
-  Invalid argument: {arg}
-  Duplicate argument: {arg}
+							*E474* *E475* *E983* 
+  Invalid argument ~
+  Invalid argument: {arg} ~
+  Duplicate argument: {arg} ~
 
 An Ex command or function has been executed, but an invalid argument has been
 specified.
 
-							*E488*  >
-  Trailing characters
+							*E488* 
+  Trailing characters ~
+  Trailing characters: {text} ~
 
 An argument has been added to an Ex command that does not permit one.
+Or the argument has invalid characters and has not been recognized.
 
-							*E477* *E478*  >
-  No ! allowed
-  Don't panic!
+							*E477* *E478* 
+  No ! allowed ~
+  Don't panic! ~
 
 You have added a "!" after an Ex command that doesn't permit one.
 
-							*E481*  >
-  No range allowed
+							*E481* 
+  No range allowed ~
 
 A range was specified for an Ex command that doesn't permit one.  See
 |cmdline-ranges|.
 
-							*E482* *E483*  >
-  Can't create file {filename}
-  Can't get temp file name
+							*E482* *E483* 
+  Can't create file {filename} ~
+  Can't get temp file name ~
 
 Vim cannot create a temporary file.
 
-							*E484* *E485*  >
-  Can't open file {filename}
-  Can't read file {filename}
+							*E484* *E485* 
+  Can't open file {filename} ~
+  Can't read file {filename} ~
 
 Vim cannot read a temporary file.  Especially on Windows, this can be caused
 by wrong escaping of special characters for cmd.exe; the approach was
@@ -752,8 +760,8 @@ changed with patch 7.3.443.  Try using |shellescape()| for all shell arguments
 given to |system()|, or explicitly add escaping with ^.  Also see
 'shellxquote' and 'shellxescape'.
 
-							*E464*  >
-  Ambiguous use of user-defined command
+							*E464* 
+  Ambiguous use of user-defined command ~
 
 There are two user-defined commands with a common name prefix, and you used
 Command-line completion to execute one of them. |user-cmd-ambiguous|
@@ -762,18 +770,25 @@ Example: >
 	:command MyCommand2 echo "two"
 	:MyCommand
 <
-							*E492*  >
-  Not an editor command
+							*E492* 
+  Not an editor command ~
 
 You tried to execute a command that is neither an Ex command nor
 a user-defined command.
 
-							*E943*  >
-  Command table needs to be updated, run 'make cmdidxs'
+							*E943* 
+  Command table needs to be updated, run 'make cmdidxs' ~
 
 This can only happen when changing the source code, when adding a command in
 src/ex_cmds.h.  The lookup table then needs to be updated, by running: >
 	make cmdidxs
+<
+						*E928* *E889* 
+  E928: String required ~
+  E889: Number required ~
+
+These happen when a value or expression is used that does not have the
+expected type.
 
 ==============================================================================
 3. Messages						*messages*
@@ -783,7 +798,7 @@ This is an (incomplete) overview of various messages that Vim gives:
 			*hit-enter* *press-enter* *hit-return*
 			*press-return* *hit-enter-prompt*
 
-  Press ENTER or type command to continue
+  Press ENTER or type command to continue ~
 
 This message is given when there is something on the screen for you to read,
 and the screen is about to be redrawn:
@@ -827,9 +842,9 @@ Also see 'mouse'.  The hit-enter message is highlighted with the |hl-Question|
 group.
 
 
-						*more-prompt* *pager*  >
-  -- More --
-  -- More -- SPACE/d/j: screen/page/line down, b/u/k: up, q: quit
+						*more-prompt* *pager* 
+  -- More -- ~
+  -- More -- SPACE/d/j: screen/page/line down, b/u/k: up, q: quit ~
 
 This message is given when the screen is filled with messages.  It is only
 given when the 'more' option is on.  It is highlighted with the |hl-MoreMsg|

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.2.  Last change: 2021 Mar 28
+*motion.txt*    For Vim version 8.2.  Last change: 2021 Dec 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -33,7 +33,8 @@ know what the hjkl keys do.  The mnemonic value of hjkl is clear from looking
 at the keyboard.  Think of j as an arrow pointing downwards.
 
 The 'virtualedit' option can be set to make it possible to move the cursor to
-positions where there is no character or halfway a character.
+positions where there is no character or within a multi-column character (like
+a tab).
 
 ==============================================================================
 1. Motions and operators				*operator*
@@ -59,9 +60,14 @@ or change text.  The following operators are available:
 	|<|	<	shift left
 	|zf|	zf	define a fold
 	|g@|	g@	call function set with the 'operatorfunc' option
-
+						*motion-count-multiplied*
 If the motion includes a count and the operator also had a count before it,
 the two counts are multiplied.  For example: "2d3w" deletes six words.
+						*operator-doubled*
+When doubling the operator it operates on a line.  When using a count, before
+or after the first character, that many lines are operated upon.  Thus `3dd`
+deletes three lines. A count before and after the first character is
+multiplied, thus `2y3y` yanks six lines.
 
 After applying the operator the cursor is mostly left at the start of the text
 that was operated upon.  For example, "yfe" doesn't move the cursor, but "yFe"
@@ -195,9 +201,9 @@ l		or					*l*
 							*$* *<End>* *<kEnd>*
 $  or <End>		To the end of the line.  When a count is given also go
 			[count - 1] lines downward, or as far is possible.
-			|inclusive| motion.  If a count of 2 of larger is
+			|inclusive| motion.  If a count of 2 or larger is
 			given and the cursor is on the last line, that is an
-			error an the cursor doesn't move.
+			error and the cursor doesn't move.
 			In Visual mode the cursor goes to just after the last
 			character in the line.
 			When 'virtualedit' is active, "$" may move the cursor
@@ -381,6 +387,8 @@ w			[count] words forward.  |exclusive| motion.
 
 <C-Right>	or					*<C-Right>* *W*
 W			[count] WORDS forward.  |exclusive| motion.
+			If <C-Right> does not work, check out
+			|arrow_modifiers|.
 
 							*e*
 e			Forward to the end of word [count] |inclusive|.
@@ -395,6 +403,8 @@ b			[count] words backward.  |exclusive| motion.
 
 <C-Left>	or					*<C-Left>* *B*
 B			[count] WORDS backward.  |exclusive| motion.
+			If <C-Left> does not work, check out
+			|arrow_modifiers|.
 
 							*ge*
 ge			Backward to the end of word [count] |inclusive|.
@@ -436,35 +446,35 @@ between Vi and Vim.
 5. Text object motions					*object-motions*
 
 							*(*
-(			[count] sentences backward.  |exclusive| motion.
+(			[count] |sentence|s backward.  |exclusive| motion.
 
 							*)*
-)			[count] sentences forward.  |exclusive| motion.
+)			[count] |sentence|s forward.  |exclusive| motion.
 
 							*{*
-{			[count] paragraphs backward.  |exclusive| motion.
+{			[count] |paragraph|s backward.  |exclusive| motion.
 
 							*}*
-}			[count] paragraphs forward.  |exclusive| motion.
+}			[count] |paragraph|s forward.  |exclusive| motion.
 
 							*]]*
-]]			[count] sections forward or to the next '{' in the
+]]			[count] |section|s forward or to the next '{' in the
 			first column.  When used after an operator, then also
 			stops below a '}' in the first column.  |exclusive|
 			Note that |exclusive-linewise| often applies.
 
 							*][*
-][			[count] sections forward or to the next '}' in the
+][			[count] |section|s forward or to the next '}' in the
 			first column.  |exclusive|
 			Note that |exclusive-linewise| often applies.
 
 							*[[*
-[[			[count] sections backward or to the previous '{' in
+[[			[count] |section|s backward or to the previous '{' in
 			the first column.  |exclusive|
 			Note that |exclusive-linewise| often applies.
 
 							*[]*
-[]			[count] sections backward or to the previous '}' in
+[]			[count] |section|s backward or to the previous '}' in
 			the first column.  |exclusive|
 			Note that |exclusive-linewise| often applies.
 
@@ -779,6 +789,9 @@ m<  or  m>		Set the |'<| or |'>| mark.  Useful to change what the
 						*:k*
 :[range]k{a-zA-Z'}	Same as :mark, but the space before the mark name can
 			be omitted.
+			This command is not supported in |Vim9| script,
+			because it is too easily confused with a variable
+			name.
 
 						*'* *'a* *`* *`a*
 '{a-z}  `{a-z}		Jump to the mark {a-z} in the current buffer.
@@ -1007,7 +1020,7 @@ These commands are not marks themselves, but jump to a mark:
 				:let lnum = line(".")
 				:keepjumps normal gg
 				:call SetLastChange()
-				:keepjumps exe "normal " . lnum . "G"
+				:keepjumps exe "normal " .. lnum .. "G"
 <
 			Note that ":keepjumps" must be used for every command.
 			When invoking a function the commands in that function
@@ -1029,12 +1042,10 @@ commands that start editing a new file.
 							*CTRL-O*
 CTRL-O			Go to [count] Older cursor position in jump list
 			(not a motion command).
-			{not available without the |+jumplist| feature}
 
 <Tab>		or					*CTRL-I* *<Tab>*
 CTRL-I			Go to [count] newer cursor position in jump list
 			(not a motion command).
-			{not available without the |+jumplist| feature}
 
 			NOTE: In the GUI and in a terminal supporting
 			|modifyOtherKeys|, CTRL-I can be mapped separately
@@ -1044,18 +1055,15 @@ CTRL-I			Go to [count] newer cursor position in jump list
 
 							*:ju* *:jumps*
 :ju[mps]		Print the jump list (not a motion command).
-			{not available without the |+jumplist| feature}
 
 							*:cle* *:clearjumps*
 :cle[arjumps]		Clear the jump list of the current window.
-			{not available without the |+jumplist| feature}
 
 							*jumplist*
 Jumps are remembered in a jump list.  With the CTRL-O and CTRL-I command you
 can go to cursor positions before older jumps, and back again.  Thus you can
 move up and down the list.  There is a separate jump list for each window.
 The maximum number of entries is fixed at 100.
-{not available without the |+jumplist| feature}
 
 For example, after three jump commands you have this jump list:
 
@@ -1069,6 +1077,9 @@ The "file/text" column shows the file name, or the text at the jump if it is
 in the current file (an indent is removed and a long line is truncated to fit
 in the window).
 
+The marker ">" indicates the current position in the jumplist.  It may not be
+shown when filtering the |:jump| command using |:filter|
+
 You are currently in line 1167.  If you then use the CTRL-O command, the
 cursor is put in line 1154.  This results in:
 
@@ -1132,13 +1143,11 @@ g;			Go to [count] older position in change list.
 			positions go to the oldest change.
 			If there is no older change an error message is given.
 			(not a motion command)
-			{not available without the |+jumplist| feature}
 
 							*g,* *E663*
 g,			Go to [count] newer cursor position in change list.
 			Just like |g;| but in the opposite direction.
 			(not a motion command)
-			{not available without the |+jumplist| feature}
 
 When using a count you jump as far back or forward as possible.  Thus you can
 use "999g;" to go to the first change for which the position is still

runtime/doc/netbeans.txt

@@ -1,4 +1,4 @@
-*netbeans.txt*  For Vim version 8.2.  Last change: 2020 Nov 02
+*netbeans.txt*  For Vim version 8.2.  Last change: 2022 Apr 03
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur et al.
@@ -124,12 +124,12 @@ In case you do not want the NetBeans interface you can disable it by
 uncommenting a line with "--disable-netbeans" in the Makefile.
 
 Currently the NetBeans interface is supported by Vim running in a terminal and
-by gvim when it is run with one of the following GUIs: GTK, GNOME, Windows,
-Athena and Motif.
+by gvim when it is run with one of the following GUIs: GTK, GNOME, Windows
+and Motif.
 
 							*netbeans-xpm*
 If Motif support is required the user must supply XPM libraries.
-The XPM library is required to show images within Vim with Motif or Athena.
+The XPM library is required to show images within Vim with Motif.
 Without it the toolbar and signs will be disabled.
 
 The XPM library is provided by Arnaud Le Hors of the French National Institute

runtime/doc/os_dos.txt

@@ -17,6 +17,7 @@ versions of Vim.  Also see |os_win32.txt| and |os_msdos.txt|.
 7. Interrupting			|dos-CTRL-Break|
 8. Temp files			|dos-temp-files|
 9. Shell option default		|dos-shell|
+10. PowerShell			|dos-powershell|
 
 ==============================================================================
 1. File locations					*dos-locations*
@@ -297,8 +298,86 @@ For Win32 as:
 	<shell> -c "command name >file"
 For DOS 32 bit, DJGPP does this internally somehow.
 
-When starting up, Vim checks for the presence of "sh" anywhere in the 'shell'
-option.  If it is present, Vim sets the 'shellcmdflag' and 'shellquote' or
-'shellxquote' options will be set as described above.
+When starting up, if Vim does not recognise a standard Windows shell it checks
+for the presence of "sh" anywhere in the 'shell' option.  If it is present,
+Vim sets the 'shellcmdflag' and 'shellquote' or 'shellxquote' options will be
+set as described above.
+
+==============================================================================
+10. PowerShell					*dos-powershell* *dos-pwsh*
+
+Vim supports PowerShell Desktop and PowerShell Core.  PowerShell Desktop is
+the version of PowerShell that is installed with Windows, while PowerShell
+Core is a separate downloadable version that works cross-platform.  To see
+which version you are using then enter the following in a PowerShell prompt -
+$PSVersionTable.PSEdition
+
+If 'shell' includes "powershell" in the filename at startup then VIM sets
+'shellcmdflag', 'shellxquote', 'shellpipe', and 'shellredir' options to the
+following values:
+
+'shellcmdflag'	-Command
+'shellxquote'	"
+'shellpipe'	2>&1 | Out-File -Encoding default
+'shellredir'	2>&1 | Out-File -Encoding default
+
+If 'shell' includes "pwsh" in the filename at startup then VIM sets
+'shellcmdflag', 'shellxquote', 'shellpipe', and 'shellredir' options to the
+following values:
+
+'shellcmdflag'	-c
+'shellxquote'	"
+'shellpipe'	>%s 2>&1
+'shellredir'	>%s 2>&1
+
+If you find that PowerShell commands are taking a long time to run then try
+with "-NoProfile" at the beginning of the 'shellcmdflag'.  Note this will
+prevent any PowerShell environment setup by the profile from taking place.
+
+If you have problems running PowerShell scripts through the 'shell' then try
+with "-ExecutionPolicy RemoteSigned -Command" at the beginning of
+'shellcmdflag'.  See online Windows documentation for more information on
+PowerShell Execution Policy settings.
+
+See |option-backslash| about including spaces in 'shellcmdflag' when using
+multiple flags.
+
+The 'shellpipe' and 'shellredir' option values re-encode the UTF-16LE output
+from PowerShell Desktop to your currently configured console codepage.  The
+output can be forced into a different encoding by changing "default" to one of
+the following:
+
+	unicode		 - UTF-16LE (default output from PowerShell 5.1)
+	bigendianunicode - UTF-16
+	utf8		 - UTF-8
+	utf7		 - UTF-7 (no BOM)
+	utf32		 - UTF-32
+	ascii		 - 7-bit ASCII character set
+	default		 - System's active code page (typically ANSI)
+	oem		 - System's current OEM code page
+
+Note The above multi-byte Unicode encodings include a leading BOM unless
+otherwise indicated.
+
+By default PowerShell Core's output is UTF-8 encoded without a BOM.  If you
+want to force the output of PowerShell Core into a different encoding then set
+'shellredir' and 'shellpipe' to "2>&1 | Out-File -Encoding encoding" where
+encoding is one of the following:
+
+	ascii		 - 7-bit ASCII character set
+	bigendianunicode - UTF-16BE
+	bigendianutf32	 - UTF-32BE
+	oem		 - System's current OEM code page
+	unicode		 - UTF-16LE
+	utf7		 - UTF-7
+	utf8		 - UTF-8
+	utf8BOM		 - UTF-8, with BOM
+	utf8NoBOM	 - UTF-8, no BOM (default output from PowerShell Core)
+	utf32		 - UTF-32
+
+Since PowerShell Core 6.2, the Encoding parameter also supports specifying a
+numeric ID of a registered code page (-Encoding 1251) or string names of
+registered code pages (-Encoding "windows-1251").  The .NET documentation for
+Encoding.CodePage has more information
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/doc/os_haiku.txt

@@ -194,9 +194,8 @@ $VIM/macros/swapmous.vim for an example.		|gui-mouse-mapping|
 
 11. Color names						*haiku-colors*
 
-Vim has a number of color names built-in.  Additional names are read from the
-file $VIMRUNTIME/rgb.txt, if present.  This file is basically the color
-database from X.  Names used from this file are cached for efficiency.
+Vim has a number of color names built-in. Additional names can be defined in
+|v:colornames|. See |:colorscheme| for details.
 
 
 12. GUI Toolbar Images					*haiku-toolbar-images*

runtime/doc/os_vms.txt

@@ -603,13 +603,13 @@ program to the new diff on VMS.  Add this to your .vimrc file: >
 	function MyDiff()
 	   let opt = ""
 	   if &diffopt =~ "icase"
-	     let opt = opt . "-i "
+	     let opt = opt .. "-i "
 	   endif
 	   if &diffopt =~ "iwhite"
-	     let opt = opt . "-b "
+	     let opt = opt .. "-b "
 	   endif
-	   silent execute "!mc GNU:diff.exe -a " . opt . v:fname_in . " " .  v:fname_new .
-		\  " > " . v:fname_out
+	   silent execute "!mc GNU:diff.exe -a " .. opt .. v:fname_in .. " " ..  v:fname_new ..
+		\  " > " .. v:fname_out
 	endfunction
       endif
 
@@ -767,12 +767,12 @@ GNU_TOOLS.ZIP package downloadable from http://www.polarhome.com/vim/
 
 Version 8.2
 - make all changes needed for clean compile build of v8.2 on VMS on all platforms
-- fix the call mkdir bug (vicente_polo@yahoo.es) 
+- fix the call mkdir bug (vicente_polo@yahoo.es)
 - test on VSI OpenVMS Alpha and Itanium platforms
 - added LUA support
 - added XPM support - Motif GUI with toolbar on all platforms
-- XPM v3.4.11 libraries for IA64, AXP and VAX are added 
-- start integrating the new test scripts 
+- XPM v3.4.11 libraries for IA64, AXP and VAX are added
+- start integrating the new test scripts
 
 Version 8.1
 - make necessary changes to build v8.1 on VMS

runtime/doc/os_win32.txt

@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 8.2.  Last change: 2021 Apr 05
+*os_win32.txt*  For Vim version 8.2.  Last change: 2022 Feb 14
 
 
 		  VIM REFERENCE MANUAL    by George Reilly
@@ -18,7 +18,8 @@ The 32 bit version also runs on 64 bit MS-Windows systems.
 4. Using the mouse		|win32-mouse|
 5. Running under Windows 95	|win32-win95|
 6. Running under Windows 3.1	|win32-win3.1|
-7. Win32 mini FAQ		|win32-faq|
+7. Installation package		|win32-installer|
+8. Win32 mini FAQ		|win32-faq|
 
 Additionally, there are a number of common Win32 and DOS items:
 File locations			|dos-locations|
@@ -30,6 +31,7 @@ File formats			|dos-file-formats|
 Interrupting			|dos-CTRL-Break|
 Temp files			|dos-temp-files|
 Shell option default		|dos-shell|
+PowerShell defaults		|dos-powershell|
 
 Win32 GUI			|gui-w32|
 
@@ -174,7 +176,29 @@ There was a special version of gvim that runs under Windows 3.1 and 3.11.
 Support was removed in patch 7.4.1364.
 
 ==============================================================================
-7. Win32 mini FAQ					*win32-faq*
+7. Installation package					*win32-installer*
+
+A simple installer for windows is available at http://www.vim.org/download.php
+(stable version) and nightly builds are also available at
+https://github.com/vim/vim-win32-installer/releases/
+
+The nightly builds include 32bit and 64bit builds, have most features enabled
+and usually also contain an extra cryptographic signed installer, so Windows
+will not complain.
+
+To use the installer, simply run the exe file.  The following switches are
+also supported: >
+
+    gvim_<version>.exe /S           -> silent install without any dialogues
+    gvim_<version>.exe /D=C:\vim    -> Install into directory c:\vim
+                                    -> /D must be the last argument
+    gvim_<version>.exe /S /D=c:\vim -> silent install into c:\vim
+<
+The default installation directory can alternatively be given by setting the
+$VIM environment variable.
+
+==============================================================================
+8. Win32 mini FAQ					*win32-faq*
 
 Q. How do I change the font?
 A. In the GUI version, you can use the 'guifont' option.  Example: >
@@ -270,7 +294,7 @@ A. When using :! to run an external command, you can run it with "start". For
        /b    no console window will be opened
    You can use only one of these flags at a time.  A second one will be
    treated as the start of the command.
-
+						*windows-asynchronously*
 Q. How do I avoid getting a window for programs that I run asynchronously?
 A. You have two possible solutions depending on what you want:
    1) You may use the /min flag in order to run program in a minimized state
@@ -284,17 +308,17 @@ A. You have two possible solutions depending on what you want:
 
    Example for a console application, run Exuberant ctags: >
         :!start /min ctags -R .
-<  When it has finished you should see file named "tags" in your current
+<   When it has finished you should see file named "tags" in your current
    directory.  You should notice the window title blinking on your taskbar.
    This is more noticeable for commands that take longer.
    Now delete the "tags" file and run this command: >
         :!start /b ctags -R .
-<  You should have the same "tags" file, but this time there will be no
+<   You should have the same "tags" file, but this time there will be no
    blinking on the taskbar.
    Example for a GUI application: >
         :!start /min notepad
         :!start /b notepad
-<  The first command runs notepad minimized and the second one runs it
+<   The first command runs notepad minimized and the second one runs it
    normally.
 
 						*windows-icon*

runtime/doc/pattern.txt

@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 8.2.  Last change: 2021 May 02
+*pattern.txt*   For Vim version 8.2.  Last change: 2022 Mar 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -19,7 +19,7 @@ explanations are in chapter 27 |usr_27.txt|.
 8. Composing characters		|patterns-composing|
 9. Compare with Perl patterns	|perl-patterns|
 10. Highlighting matches	|match-highlight|
-11. Fuzzy matching		|fuzzy-match|
+11. Fuzzy matching		|fuzzy-matching|
 
 ==============================================================================
 1. Search commands				*search-commands*
@@ -164,9 +164,12 @@ index, on which the cursor is. This can look like this: >
 Note: the count does not take offset into account.
 
 When no match is found you get the error: *E486* Pattern not found
-Note that for the |:global| command this behaves like a normal message, for Vi
-compatibility.  For the |:s| command the "e" flag can be used to avoid the
-error message |:s_flags|.
+Note that for the `:global` command, when used in legacy script, you get a
+normal message "Pattern not found", for Vi compatibility.
+In |Vim9| script you get E486 for "pattern not found" or *E538* when the pattern
+matches in every line with `:vglobal`.
+For the |:s| command the "e" flag can be used to avoid the error message
+|:s_flags|.
 
 					*search-offset* *{offset}*
 These commands search for the specified pattern.  With "/" and "?" an
@@ -315,7 +318,7 @@ the pattern.
 ==============================================================================
 2. The definition of a pattern		*search-pattern* *pattern* *[pattern]*
 					*regular-expression* *regexp* *Pattern*
-					*E76* *E383* *E476*
+					*E383* *E476*
 
 For starters, read chapter 27 of the user manual |usr_27.txt|.
 
@@ -925,17 +928,24 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	becomes invalid.  Vim doesn't automatically update the matches.
 	Similar to moving the cursor for "\%#" |/\%#|.
 
-						*/\%l* */\%>l* */\%<l* *E951*
+					*/\%l* */\%>l* */\%<l* *E951* *E1204*
 \%23l	Matches in a specific line.
 \%<23l	Matches above a specific line (lower line number).
 \%>23l	Matches below a specific line (higher line number).
-	These three can be used to match specific lines in a buffer.  The "23"
+\%.l	Matches at the cursor line.
+\%<.l	Matches above the cursor line.
+\%>.l	Matches below the cursor line.
+	These six can be used to match specific lines in a buffer.  The "23"
 	can be any line number.  The first line is 1.
 	WARNING: When inserting or deleting lines Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
-	wrong.
+	wrong.  Also when referring to the cursor position (".") and
+	the cursor moves the display isn't updated for this change.  An update
+	is done when using the |CTRL-L| command (the whole screen is updated).
 	Example, to highlight the line where the cursor currently is: >
-		:exe '/\%' . line(".") . 'l.*'
+		:exe '/\%' . line(".") . 'l'
+<	Alternatively use: >
+		/\%.l
 <	When 'hlsearch' is set and you move the cursor around and make changes
 	this will clearly show when the match is updated or not.
 
@@ -943,15 +953,22 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%23c	Matches in a specific column.
 \%<23c	Matches before a specific column.
 \%>23c	Matches after a specific column.
-	These three can be used to match specific columns in a buffer or
-	string.  The "23" can be any column number.  The first column is 1.
-	Actually, the column is the byte number (thus it's not exactly right
-	for multibyte characters).
+\%.c	Matches at the cursor column.
+\%<.c	Matches before the cursor column.
+\%>.c	Matches after the cursor column.
+	These six can be used to match specific columns in a buffer or string.
+	The "23" can be any column number.  The first column is 1.  Actually,
+	the column is the byte number (thus it's not exactly right for
+	multibyte characters).
 	WARNING: When inserting or deleting text Vim does not automatically
 	update the matches.  This means Syntax highlighting quickly becomes
-	wrong.
+	wrong.  Also when referring to the cursor position (".") and
+	the cursor moves the display isn't updated for this change.  An update
+	is done when using the |CTRL-L| command (the whole screen is updated).
 	Example, to highlight the column where the cursor currently is: >
-		:exe '/\%' . col(".") . 'c'
+		:exe '/\%' .. col(".") .. 'c'
+<	Alternatively use: >
+		/\%.c
 <	When 'hlsearch' is set and you move the cursor around and make changes
 	this will clearly show when the match is updated or not.
 	Example for matching a single byte in column 44: >
@@ -962,8 +979,11 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 \%23v	Matches in a specific virtual column.
 \%<23v	Matches before a specific virtual column.
 \%>23v	Matches after a specific virtual column.
-	These three can be used to match specific virtual columns in a buffer
-	or string.  When not matching with a buffer in a window, the option
+\%.v	Matches at the current virtual column.
+\%<.v	Matches before the current virtual column.
+\%>.v	Matches after the current virtual column.
+	These six can be used to match specific virtual columns in a buffer or
+	string.  When not matching with a buffer in a window, the option
 	values of the current window are used (e.g., 'tabstop').
 	The "23" can be any column number.  The first column is 1.
 	Note that some virtual column positions will never match, because they
@@ -971,13 +991,18 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	one screen character.
 	WARNING: When inserting or deleting text Vim does not automatically
 	update highlighted matches.  This means Syntax highlighting quickly
-	becomes wrong.
+	becomes wrong.  Also when referring to the cursor position (".") and
+	the cursor moves the display isn't updated for this change.  An update
+	is done when using the |CTRL-L| command (the whole screen is updated).
 	Example, to highlight all the characters after virtual column 72: >
 		/\%>72v.*
 <	When 'hlsearch' is set and you move the cursor around and make changes
 	this will clearly show when the match is updated or not.
 	To match the text up to column 17: >
 		/^.*\%17v
+<	To match all characters after the current virtual column (where the
+	cursor is): >
+		/\%>.v.*
 <	Column 17 is not included, because this is a |/zero-width| match. To
 	include the column use: >
 		/^.*\%17v.
@@ -989,7 +1014,7 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 		/.*\%17v
 <	Column 17 is highlighted by 'hlsearch' because there is another match
 	where ".*" matches zero characters.
-<
+
 
 Character classes:
 \i	identifier character (see 'isident' option)	*/\i*
@@ -1048,6 +1073,8 @@ match ASCII characters, as indicated by the range.
 
 \(\)	A pattern enclosed by escaped parentheses.	*/\(* */\(\)* */\)*
 	E.g., "\(^a\)" matches 'a' at the start of a line.
+	There can only be ten of these.  You can use "\%(" to add more, but
+	not counting it as a sub-expression.
 	*E51* *E54* *E55* *E872* *E873*
 
 \1      Matches the same string that was matched by	*/\1* *E65*
@@ -1070,7 +1097,7 @@ x	A single character, with no special meaning, matches itself
 \x	A backslash followed by a single character, with no special meaning,
 	is reserved for future expansions
 
-[]	(with 'nomagic': \[])		*/[]* */\[]* */\_[]* */collection*
+[]	(with 'nomagic': \[])		*/[]* */\[]* */\_[]* */collection* *E76*
 \_[]
 	A collection.  This is a sequence of characters enclosed in square
 	brackets.  It matches any single character in the collection.
@@ -1217,7 +1244,7 @@ x	A single character, with no special meaning, matches itself
 
 \%d123	Matches the character specified with a decimal number.  Must be
 	followed by a non-digit.
-\%o40	Matches the character specified with an octal number up to 0377.
+\%o40	Matches the character specified with an octal number up to 0o377.
 	Numbers below 0o40 must be followed by a non-octal digit or a
 	non-digit.
 \%x2a	Matches the character specified with up to two hexadecimal characters.
@@ -1433,7 +1460,7 @@ Finally, these constructs are unique to Perl:
 		":2match" for another plugin.
 
 ==============================================================================
-11. Fuzzy matching					*fuzzy-match*
+11. Fuzzy matching					*fuzzy-matching*
 
 Fuzzy matching refers to matching strings using a non-exact search string.
 Fuzzy matching will match a string, if all the characters in the search string
@@ -1449,7 +1476,8 @@ criteria:
     - The number of characters (distance) between two consecutive matching
       characters.
     - Matches at the beginning of a word
-    - Matches after a camel case character or a path separator or a hyphen.
+    - Matches at a camel case character (e.g. Case in CamelCase)
+    - Matches after a path separator or a hyphen.
     - The number of unmatched characters in a string.
 The matching string with the highest score is returned first.
 
@@ -1465,5 +1493,4 @@ the matching positions and the fuzzy match scores.
 The "f" flag of `:vimgrep` enables fuzzy matching.
 
 
-
  vim:tw=78:ts=8:noet:ft=help:norl: