Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: #13321
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Coverity complains about change in charset (after v9.0.2017)
Solution: check pointer t at index 0
closes: #13322
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: islocked() needs more work
Solution: rework islocked() and remove sync_root
from get_lval()
closes: #13329
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
* Improve command-line completion docs
Add more details about 'ignorecase' and its effect on cmdline
completion.
Make sure keys used in wildmenu are properly documented and linked in the
keys' documentation entries, and in `:h index` for proper
cross-referencing, as wildmenu popup is slightly different from
insert-mode popup menu.
* Fix docs typos
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: complete_info() returns wrong index
Solution: Make order of 'info' in completion_info consistent
Start the iteration from the same point and follow the same direction as
done when assigning the completion numbers. This way we remove the
dependence on the completion direction and make the order of 'info'
consistent.
closes: #12230closes: #12971
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: #13228closes: #13243
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: assignment operators don't work for class vars
Solution: implement it
closes: #13306
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: does not handle islocked() from a method correctly
Solution: Handle islocked() builtin from a method.
- Setup `lval_root` from `f_islocked()`.
- Add function `fill_exec_lval_root()` to get info about executing method.
- `sync_root` added in get_lval to handle method member access.
- Conservative approach to reference counting.
closes: #13309
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: confusing ifdefs in if_<lang>.c
Solution: refactor ifndefs to #ifdefs
if_x: Avoid using #ifndef - #else - #endif
Using #ifndef - #else - #endif is sometimes confusing.
Use #ifdef - #else - #endif instead.
closes: #13310
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: Vim9: error message can be more accurate
Solution: Fix the error messages
Fix message for some single use error messages.
closes: #13312
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: INI files not detected
Solution: detect uppercase .INI as dosini files
It previo~1 only worked for lower-case .ini files, but upperc~1 .INI is
also somewhat common on account of DOS' old 8.3 upperc~2 only filena~1.
closes: #13316
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Martin Tournoij <martin@arp242.net>
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: #13303
related: #13301
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: test: undofile left behind
Solution: cleanup undofile
fix: tmp file not deleted when running make test_undo
Temporary file `.Xtestfile.txt.un~` was left running `make test_undo`
and vim was configured with:
```
./configure --with-features=normal --enable-gui=no --enable-terminal
```
closes: #13304
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Problem: Vim9: covariant parameter types allowed when assigning
functions
Solution: Enforce invariant type check for arguments and return value
when assigning a funcref
closes: #13299closes: #13305
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: partially revert patch v9.0.1997
Solution: add a comment, to make clear it's not used
related: #13288
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: need cleanup of class related interface code
Solution: Remove the unused class variable and class method related code
for interfaces.
Remove unused class variable and class method related code for
interfaces.
Refactor the code.
Optimize the object/class member double lookup in compile_lhs().
Change unused global functions to static functions.
closes: #13302
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: segfault with islocked()
Solution: Check that the lval pointer is not null for objects and
class variables
closes: #13295
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Vim9: use-after-free in deep call stack
Solution: Get the objct pointer from execution stack
closes: #13296
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: some error messages can be improved
Solution: Mention the defining class for variable access error message
closes: #13272
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: xxd: cannot reverse a bit dump
Solution: implement reversing the bit dump using -b -r
closes: #13286
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: tristhaus <tristhaus@yahoo.de>
Problem: Some unused code in move.c and string.c
Solution: Remove it
closes: #13288
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem: Cannot build with python312
Solution: Define wrapper types and functions for python 3.12
Py_SIZE() uses PyLong_Type and PyBool_Type starting from Python 3.12.
We need to define our own Py_SIZE() to replace Py{Bool,Long}_Type with
py3_Py{Bool,Long}_Type.
We also need to redefine PyTuple_GET_SIZE() and PyList_GET_SIZE(), because
they use Py_SIZE().
closes: #13281closes: #13290
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: inconsistent feature description
Solution: delete old mentioned feature sets small and big
The may however still be mentioned for historical reasons. e.g. The
last Amiga built version is for Vim6.2 and is still a big version.
closes: #13273
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: RestorerZ <restorer@mail2k.ru>
Problem: no cmdline completion for setting the font
Solution: enable it on Win32 and GTK builds
Add guifont cmdline completion (for Windows and GTK)
For Windows, auto-complete will only suggest monospace fonts as that's
the only types allowed. Will also suggest font options after the colon,
including suggesting the current font size for convenience, and misc
charset and quality options like `cANSI` and `qCLEARTYPE`.
For GTK, auto-complete will suggest only monospace fonts for `guifont`
but will include all fonts for `guifontwide`. The completion code
doesn't currently suggest the current font size, as the GTK guifont
format does not have a clear delimiter (':' for other platforms).
closes: #13264
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: strange error number
Solution: change error number,
add doc tag for E1507
closes: #13270
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: Vim9: double error message given
Solution: Only give second error message, if ther
wasn't one given before
closes: #13278
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Vim9: potential use-after-free for class members
Solution: Use the class-related grow array for storing the
member type instead of using a temporary type
list grow array
Use the type list grow array associated with the class than using a
temporary type list grow array to allocate the class member type.
For simple types, a predefined type is used. For complex types, the type
is dynamically allocated from a grow array. For class variables, the
type grow array in the class should be used. So that the lifetime of the
type is same as the lifetime of the class.
closes: #13279
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: win32: font-size calculation can be improved
Solution: calculate font size before the window size
Support calculating the new size even if a bitmap font is used.
Calculate the new font size before actually change the Window size.
closes: #13280
related: #11812, #13252
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: CI: codecov is intrusive
Solution: disable codecov comments
The codecov report is incredibly intrusive, and getting a notification
for every PR to vim that codecov codecoved is annoying. If anyone is
interested in the report the information is readily available by
clicking on the job.
closes: #13285
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem: Scrolling non-current window using mouse is inconsistent
depending on 'scrollbind'/'scrolloff' and different from GUI
vertical scrollbar when 'cursorbind' is set.
Solution: Don't move cursor in non-current windows for 'cursorbind' if
cursor in the current window didn't move.
closes: #13219closes: #13210
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: vim9: clean up from v9.0.1955
Solution: Fix a few remaining issues, improve error message
- Use `cl_exec`, the executing class, to check permissions in `get_lval()`.
- Handle lockvar of script variable from class.
- Add 'in class "Xxx"' to e_cannot_access_private_variable_str.
closes: #13222
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Cannot scroll up in diff mode with many filler lines and zero
'scrolloff'.
Solution: Invalidate w_cline_row before calling comp_botline().
closes: #13256
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: win32: issues with stable python ABI
Solution: if_python3,win32: Fix Python3 stable ABI
There were some issues in current stable ABI implementation on Windows:
* Python DLL name should be `python3.dll` instead of `python311.dll` and
so on. (See: https://docs.python.org/3/c-api/stable.html)
* Some non-stable API functions were used:
- `_PyObject_NextNotImplemented`
- `PyStdPrinter_Type`
* `reset_stdin()` and `hook_py_exit()` didn't work with `python3.dll`.
`python3.dll` is a special type of DLL called forwarder DLL.
It just forwards the functions to other DLL (e.g. `python311.dll`).
There were two issues regarding these functions:
- `python3.dll` doesn't have import tables. This caused a crash in
`get_imported_func_info()`. Add a check whether the specified DLL
has an import table.
- `reset_stdin()` and `hook_py_exit()` should be applied to the
forwarded DLL (e.g. `python311.dll`), not to `python3.dll`.
Check the export directory of `python3.dll` to find the forwarded
DLL and apply the functions to it.
closes: #13260
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: Cirrus CI disabled
Solution: re-enable Cirrus CI
Ref patch 9.0.1912:
> Perhaps at the beginning of the next month we can revisit and enable
> just a build without testing it. Hopefully this is won't take too
> many credits and we can at least verify that building works.
Actually enabling testing should be fine. In the last month there were
three Cirrus CI jobs and credits ran out on Sep 15, but now there is
only one Cirrus CI job, so credits shouldn't run out.
closes: #13261
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: No filetype detection for just files
Solution: Detect just files (*.just, justfile, etc)
closes: #13271
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem: Vim9: object members can change type
Solution: Check type during assignment to object/class var
closes: #13127closes: #13262
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: xattr: permission-denied errors on write
Solution: ignore those errors
closes: #13246
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gene C <arch@sapience.com>
* Updated to Vim 9.0.1968. Several refinements and corrections
* typo fixed
Co-authored-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Clean up cmdline option completion code
Solution: Fix various minor problems
- Fix manual array size calculations to just use `ARRAY_LENGTH()`.
- Fix unintentional typo in comments due to copy-paste error.
- Fix assert_equal() usages to pass the expected value to first
parameter instead of 2nd one to avoid confusion.
- Fix signed vs unsigned warnings
- Correct misplaced comments about set_op_T and set_prefix_T
and fix a typo in another comment
closes: #13249closes: #13237
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: win32: missing '**' expansion test (after v9.0.1947)
Solution: Add test for MS-Windows
win32: Add "**" test
Vim supports "**" on MS-Windows. However, it is not tested by
`Test_glob_extended_bash`.
Unlike Unix, it doesn't use 'shell' and doesn't support {,} expansion.
So, I added as a separate test.
related: #13205closes: #13250
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: macOS: FEAT_SOUND guard too restrictive
Solution: check for older macOS support properly
Fix macOS FEAT_SOUND guards to be less restrictive
This allows +sound to work on older macOS platforms again. The +sound
implementation uses APIs available in 10.6, but the code itself uses
generics with type parameters which was only added in Xcode 7 / clang 7,
which was released for macOS 10.11. This means as long as Vim is
compiled under 10.11+, and using a deployment target >= 10.6, the
feature will work.
closes: #13251
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: win32: high-dpi support can be improved
Solution: implement WM_GETDPISCALEDSIZE
win32: Better support of Per-Monitor V2 High DPI
Implement WM_GETDPISCALEDSIZE.
It is not so easy to calculate the new size without actually changing
the size. So, this returns an approximate size.
This doesn't work well when a bitmap font (e.g. FixedSys) is selected,
but I think this is acceptable.
closes: #11812closes: #13252
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: buffer-overflow in trunc_string()
Solution: Add NULL at end of buffer
Currently trunc_string() assumes that when the string is too long,
buf[e-1] will always be writeable. But that assumption may not always be
true. The condition currently looks like this
else if (e + 3 < buflen)
[...]
else
{
// can't fit in the "...", just truncate it
buf[e - 1] = NUL;
}
but this means, we may run into the last else clause with e still being
larger than buflen. So a buffer overflow occurs.
So instead of using `buf[e - 1]`, let's just always
truncate at `buf[buflen - 1]` which should always be writable.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cmdline completion should consider key option
Solution: Disable cmdline completion for key option, slightly
refactor how P_NO_CMD_EXPAND is handled
Harden crypto 'key' option: turn off cmdline completion, disable set-=
"set-=" can be used maliciously with a crypto key, as it allows an
attacker (who either has access to the computer or a plugin author) to
guess a substring by observing the modified state. Simply turn off
set+=/-=/^= for this option as there is no good reason for them to be
used.
Update docs to make that clear as well.
Also, don't allow cmdline completion for 'key' as it just shows *****
which is not useful and confusing to the user what it means (if the user
accidentally hits enter they will have replaced their key with "*****"
instead).
Move logic to better location, don't use above 32-bit for flags
Move P_NO_CMD_EXPAND to use the unused 0x20 instead of going above
32-bits, as currently the flags parameter is only 32-bits on some
systems. Left a comment to warn that future additions will need to
change how the flags work either by making it 64-bit or split into two
member vars.
Also, move the logic for detecting P_NO_CMD_EXPAND earlier so it's not
up to each handler to decide, and you won't see the temporary "..." that
Vim shows while waiting for completion handler to complete.
closes: #13224
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: xattr errors not translated
Solution: mark for translation, consistently capitalize
first letter.
closes: #13236
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: configure prints stray 6 when checking libruby
Solution: redirect stdout to dev/null
configure: Do not print "6" when checking for libruby
`expr` will print the matched string length to the standard output.
Current `configure` output looks like this:
```
checking Ruby header files... /usr/include/ruby-3.1.0
6
```
The script really only cares about `expr` exit code.
closes: #13234
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: wrong auto/configure script
Solution: regenerate with autoconf 2.71
configure: sys/xattr.hs: Regenerate with autoconf 2.71
It seems that `auto/configure` update in
commit 6de4e58cf2 (tag: v9.0.1963)
Author: zeertzjq <zeertzjq@outlook.com>
Date: Sat Sep 30 14:19:14 2023 +0200
patch 9.0.1963: Configure script may not detect xattr
Problem: Configure script may not detect xattr correctly
Solution: include sys/xattr instead of attr/xattr,
make Test_write_with_xattr_support() test
xattr feature correctly
This also applies to the Smack security feature, so change the include
and configure script for it as well.
closes: #13229
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
was done manually, and missed an update to the generated variable name.
closes: #13235
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: xattr support fails to build on MacOS X
Solution: Disable xattr support for MacOS X
MacOS X uses the same headers and functions sys/xattr.h but the function
signatures for xattr support are much different, so building fails.
So let's for now disable xattr support there.
closes: #13230closes: #13232
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Configure script may not detect xattr correctly
Solution: include sys/xattr instead of attr/xattr,
make Test_write_with_xattr_support() test
xattr feature correctly
This also applies to the Smack security feature, so change the include
and configure script for it as well.
closes: #13229
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: No support for writing extended attributes
Solution: Add extended attribute support for linux
It's been a long standing issue, that if you write a file with extended
attributes and backupcopy is set to no, the file will loose the extended
attributes.
So this patch adds support for retrieving the extended attributes and
copying it to the new file. It currently only works on linux, mainly
because I don't know the different APIs for other systems (BSD, MacOSX and
Solaris). On linux, this should be supported since Kernel 2.4 or
something, so this should be pretty safe to use now.
Enable the extended attribute support with normal builds.
I also added it explicitly to the :version output as well as make it
able to check using `:echo has("xattr")`, to have users easily check
that this is available.
In contrast to the similar support for SELINUX and SMACK support (which
also internally uses extended attributes), I have made this a FEAT_XATTR
define, instead of the similar HAVE_XATTR.
Add a test and change CI to include relevant packages so that CI can
test that extended attributes are correctly written.
closes: #306closes: #13203
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cmdline completion for 'listchars' fields doesn't include
"multispace" and "leadmultispace" (after 9.0.1958).
Solution: Include "multispace" and "leadmultispace" in lcstab.
closes: #13225
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Make CI checks more strict
Solution: Add -Wstrict-prototypes -Wmissing-prototypes to CI,
fix uncovered problems
Add -Wstrict-prototypes -Wmissing-prototypes warnings check to CI
Add two new warnings to CI, silence some Perl related build-warnings:
- `strict-prototypes` helps prevent declaring a function with an empty
argument list, e.g. `int func()`. In C++, that's equivalent to `int
func(void)`, but in C, that means a function that can take any number
of arguments which is rarely what we want.
- `missing-prototypes` makes sure we use `static` for file-only internal
functions. Non-static functions should have been declared on a
prototype file.
- Add `no-compound-token-split-by-macro` to the perl cflags, since it
throws out a bunch of perl-related warnings that make the CI log
unnecessary verbose and hard to read. This seems to happen only with
clang 12 and above.
When applying those changes, it already uncovered a few warnings, so fix
up the code as well (fix prototypes, make the code static, remove
shadowed var declaration)
GTK header needs to have #pragma warning suppressiong because GTK2
headers will warn on `-Wstrict-prototypes`, and it's included by gui.h
and so we can't just turn off the warning in a couple files.
closes: #13223closes: #13226
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Vim9: methods parameters and types are covariant
Solution: Support contra-variant type check for object method arguments
(similar to Dart).
closes: #12965closes: #13221
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: #13182
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: termcap options should change on keyprotocol setting
Solution: Apply termcap entries when 'keyprotocol' changes
When the 'keyprotocol' option was set after startup (including in a
user's .vimrc) the termcap entries associated with the matching protocol
were not applied. Thus, setting the option has no affect.
When 'keyprotocol' is changed it should also update the termcap entries.
closes: #13211
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Custom cmdline completion skips original cmdline when pressing
Ctrl-P at first match if completion function invokes glob().
Solution: Move orig_save into struct expand_T.
closes: #13216
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9: lockvar issues with objects/classes
Solution: fix `get_lhs()` object/class access and avoid `SEGV`,
make error messages more accurate.
- `get_lval()` detects/returns object/class access
- `compile_lock_unlock()` generate code for bare static and obj_arg access
- `do_lock_var()` check lval for `ll_object`/`ll_class` and fail if so.
Details:
- Add `ll_object`/`ll_class`/`ll_oi` to `lval_T`.
- Add `lockunlock_T` to `isn_T` for `is_arg` to specify handling of `lval_root` in `get_lval()`.
- In `get_lval()`, fill in `ll_object`/`ll_class`/`ll_oi` as needed; when no `[idx] or .key`, check lval_root on the way out.
- In `do_lock_var()` check for `ll_object`/`ll_class`; also bullet proof ll_dict case
and give `Dictionay required` if problem. (not needed to avoid lockvar crash anymore)
- In `compile_lock_unlock()` compile for the class variable and func arg cases.
closes: #13174
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: CI: change netrw label in labeller bot
Solution: Rename it to 'plugin-netrw'
closes: #13217
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: Misplaced comment in errors.h
Solution: Move it up
closes: #13218
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: Vim9: hard to debug vim9_class errors from CI
Solution: Include the line number in assert_xxx() calls. Include the
entire error message in the tests. Fix the indentation in the
test file. Add tags for new error codes.
closes: #13206
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: error codes spread out
Solution: group them together and reserve 100
more for future use
Reserve 100 error codes for future enhancements to the Vim9 class
support
closes: #13207
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: object variable "this." should only be used in
constructor
Solution: Disallow to this in normal object methods (other than
constructors)
closes: #13152closes: #13212
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: h-east <h.east.727@gmail.com>
Problem: Bash Expansion test fails on Windows/MacOS
Solution: Disable Test_glob_extended_bash for now
This test doesn't work on Windows even if bash can be executed, since
the globstar functionality has only been enabled in Unix builds of Vim
(Commit 9eb1ce5315, patch 9.0.1946).
closes: #13205
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Commit f6fc255e8d (v9.0.1834) updated xxd.1 but the xxd.man
page wasn't re-generated. So let's just regenerate it now.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filename expansion using ** in bash may fail
Solution: Try to enable the globstar setting
Starting with bash 4.0 it supports extended globbing using the globstar
shell option. This makes matching recursively below a certain directory
using the ** pattern work as expected nowadays. However, we need to
explicitly enable this using the 'shopt -s globstar' bash command.
So let's check the bash environment variable $BASH_VERSINFO (which is
supported since bash 3.0 and conditionally enable the globstar option,
if the major version is at least 4. For older bashs, this at least
shouldn't cause errors (unless one is using really ancient bash 2.X or
something).
closes: #13002closes: #13144
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: missing support for ro-vars in interface
Solution: Support only read-only object variables in an interface,
add additional checks when parsing class definitions.
closes: #13183
cloess: #13184
cloess: #13185.
closes: #13188
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
ftplugin/rmd.vim:
- Set 'commentstring' dynamically according to code region.
syntax/rmd.vim:
- Include syntax highlighting of fenced languages dynamically.
- Add conceal char for line break.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: function instruction pointer invalidated
Solution: Use the funcref index instead of the instruction pointer
closes: #13178closes: #13196
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: execution stack invalidated with null object
Solution: Check for a null object before adjusting the execution stack
closes: #13186
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: still a problem when processing LSP RPC requests
Solution: When processing async LSP RPC requests, compare sequence
numbers only in response messages
A LSP request message can be sent to the language server either
synchronously (ch_evalexpr) or asynchronously (ch_sendexpr). In both
cases, when looking for response messages by using the sequence number,
LSP requests messages from the language server with the same sequence
number should not be used. Patch 9.0.1927 fixed this issue for
synchronous requests. This PR fixes the issue for asynchronous requests
and adds additional tests.
closes: #13158
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: multispace wrong when scrolling horizontally
Solution: Update position in "multispace" or "leadmultispace" also in
skipped chars. Reorder conditions to be more consistent.
closes: #13145closes: #13147
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: missing test for mouse click + 'virtedit'
Solution: Add test for clicking after eol with 'virtualedit' and wrapped
line
closes: #13157
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: test: using wrong expected message in test_crypt
Solution: make use of single quotes
closes: #13151
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Isao Sato <svardew@gmail.com>
Problem: Vim9: not consistent error messages
Solution: Make error messages more consistent. Use "variable" for
(object/class) member
closes: #13155
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: RestorerZ <restorer@mail2k.ru>
Problem: :bwipe fails after switching window from aucmd_win.
Solution: Decrement b_nwindows after switching back to aucmd_win.
closes: #13160
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Can change the type of a v: variable using if_lua.
Solution: Add additional handling of v: variables like :let.
closes: #13161
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9: error when using null object constructor
Solution: Check for a null object only when calling an object method
closes: #13154closes: #13163
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: make test_compilers fails on ubuntu
Solution: set LC_ALL=C
fix: make test_compiler failed on xubuntu 22.04.3
Problem: 'make test_compiler' failed on Linux xubuntu 22.04.3 but
succeeded on e.g. macOS. To reproduce:
```
$ ./configure --with-features=huge --enable-gui=no --enable-perlinterp=yes
$ make -j12
$ cd vim/src/testdir
$ make test_compiler
...snip...
Found errors in Test_compiler():
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 24: command did not fail: clist
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 30: Pattern '\\n \\d\\+ Xfoo.pl:3: Global symbol "$foo" requires explicit package name' does not match '\n19 Xfoo.pl:3: Global symbol "$foo" requires explicit package name (did you forget to declare "my $foo"?)'
make: *** [Makefile:70: test_compiler] Error 1
```
Solution: set `LC_ALL` to "C" in `Test_compiler()`
closes: #13173
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Problem: compiler warnings with clang-17
Solution: Fix function prototypes and function pointer
fix: clang compilation warnings with -Wstrict-prototypes
Change fixes this kind of compilation warnings with clang:
```
proto/if_python3.pro:13:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
13 | int python3_version();
| ^
| void
```
closes: #13166
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Problem: runtime tests fail with tiny vim
Solution: check for tiny vim, run runtime tests in CI
even for tiny version
closes: #13169closes: #13170
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Problem: patch 1916 (fixed terminal size) not optimal
Solution: Add defines to make it easier changeable later
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: not enough info in error message
Solution: Add class name, change member to variable, quote names
closes: #13136
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: if_python: still undefined behaviour with function pointer
Solution: fix remaining problems
Fix remaining issues in the if_python code in casting incompatible
function pointers leading to Clang 17 giving runtime errors during
UBSAN.
closes: #13140
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: curswant wrong on click with 've' and 'wrap' set
Solution: Add w_leftcol to mouse click column.
closes: #13142
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: LSP server request message is misinterpreted as a response message
Solution: Check that the message does not have the "message" field
closes: #13133
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: cannot write public var in nested object
Solution: Write variable in nested read-only object reference.
Also test write fails.
closes: #13130closes: #13131
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Wrong curswant when clicking on empty line or with vsplits.
Solution: Don't check for ScreenCols[] before the start of the window
and handle empty line properly.
closes: #13132
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: No filetype detection for Authzed filetypes
Solution: Detect the *.zed file extension as authzed filetype
closes: #13129
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Matt Polzin <mpolzin@workwithopal.com>
Problem: undefined behaviour with python function pointer
Solution: correctly cast function pointers from void
Fix more undefined behaviors in if_python
Fix remaining UBSAN errors from Clang 17 in if_python in casting
function pointers.
Also fix a mistake where `PyMem_Free()` should be returning void, by the
dynamic build is mistakenly casting it as a function that returns an
int.
closes: #13128
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Crash when allocating large terminal screen
Solution: Don't allow values > 1000 for terminal
screen columns and rows
closes: #13126
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: r_CTRL-C works differently in visual mode
Solution: Make r_CTRL-C behave consistent in visual mode
in terminal and Windows GUI
in visual mode, r CTRL-C behaves strange in Unix like environments. It
seems to end visual mode, but still is waiting for few more chars,
however it never seems to replace it by any characters and eventually
just returns back into normal mode.
In contrast in Windows GUI mode, r_CTRL-C replaces in the selected area
all characters by a literal CTRL-C.
Not sure why it behaves like this. It seems in the Windows GUI, got_int
is not set and therefore behaves as if any other normal character has
been pressed.
So remove the special casing of what happens when got_int is set and
make it always behave like in Windows GUI mode. Add a test to verify it
always behaves like replacing in the selected area each selected
character by a literal CTRL-C.
closes: #13091closes: #13112
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: few issues when accessing object members
Solution: When calling an object method, check for null object.
Accessing a Dict object member doesn't work.
closes: #13119closes: #13123closes: #13124
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: if_python: undefined behaviour for function pointers
Solution: Fix if_python undefined behavior for function pointer casts
Identified by clang 17 UBSAN (see #12745). Make sure to cast function
pointers with the same signature only.
closes: #13122
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Cirrus-CI running out of credits
Solution: disable Cirrus-CI for now
We are running out of credits for Cirrus CI already at the middle of the
month and unfortunately this means our CI now consistently fails. This
all hapens because cirrus ci is not enforcing the free-tier limits (see also
https://cirrus-ci.org/blog/2023/07/17/limiting-free-usage-of-cirrus-ci/).
Perhaps at the beginning of the next month we can revisit and
enable just a build without testing it. Hopefully this is won't take
too many credits and we can at least verify that building works.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Mac OS X: missing sound support on older versions
Solution: Check Macro MAC_OS_X_VERSION_MIN_REQUIRED
Extend guard for sound support on OS X
Fixes build on legacy versions where required coreaudio functionality
may not be available. NSSoundDelegate apparently was introduced in Snow
Leopard yet the build breaks on it. Guarding off enabling sound support
to El Capitan as that's the next version I had access to for testing (it
may work on earlier versions)
https://developer.apple.com/documentation/appkit/nssounddelegate Vim
builds on OS X Tiger 10.4 and newer with this change.
closes: #13115
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Sevan Janiyan <venture37@geeklan.co.uk>
Problem: Vim9: problem calling class method from other class
Solution: Fix this problem, fix readonly object access, update error
messages.
Calling a class method from another method without the class name prefix
doesn't work properly.
A readonly object variable is modifiable outside the class using a
nested object assignment.
Remove the unused E1338 error message.
Update error messages.
closes: #13116
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: undefined behaviour upper/lower function ptrs
Solution: Fix UBSAN error in regexp and simplify upper/lowercase
modifier code
The implementation of \u / \U / \l / \L modifiers in the substitute
command relies on remembering the state by setting function pointers on
func_all/func_one in the code. The code signature of `fptr_T` is
supposed to return void* (due to C function signatures not being able to
return itself due to type recursion), and the definition of the
functions (e.g. to_Upper) didn't follow this rule, and so the code tries
to cast functions of different signatures, resulting in undefined
behavior error under UBSAN in Clang 17. See #12745.
We could just fix `do_Upper`/etc to just return void*, which would fix
the problem. However, these functions actually do not need to return
anything at all. It used to be the case that there was only one pointer
"func" to store the pointer, which is why the function needs to either
return itself or NULL to indicate whether it's a one time or ongoing
modification. However, c2c355df6f
(7.3.873) already made that obsolete by introducing `func_one` and
`func_all` to store one-time and ongoing operations separately, so these
functions don't actually need to return anything anymore because it's
implicit whether it's a one-time or ongoing operation. Simplify the code
to reflect that.
closes: #13117
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
closes: #12990closes: #12992
this partially reverses commit 71badf9 by commenting out the line that
intentionally sets the filetype to an empty string.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Interfaces should not support class methods and
variables
Solution: Make sure interface follow the interface specification
Vim9 interface changes to follow the new interface specification:
1) An interface can have only read-only and read-write instance
variables.
2) An interface can have only public instance methods.
3) An interface cannot have class variables and class methods.
4) An interface cannot have private instance variables and private
instance methods.
5) A interface can extend another interface using "extends". The
sub-interface gets all the variables and methods in the super
interface.
That means:
- Interfaces should not support class methods and variables.
- Adjust error numbers and add additional tests.
- Interface methods can be defined in one of the super classes.
- Interface variables can be defined in one of the super classes.
and instance variables can be repeated in sub interfaces.
- Check the class variable types with the type in interface.
closes: #13100
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: FEAT_FLOAT no longer defined
Solution: Remove last existing FEAT_FLOAT ifdefs in
message_test
Remove FEAT_FLOAT as that should always be true
FEAT_FLOAT has been removed in v9.0.0491 (73e28dcc61) but
unfortunately, it was forgotten to remove it from message_test.c. So
let's remove the last mentioned ifdefs which are now unused.
closes: #13106
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem: Cirrus-CI fails because we have used all credits
Solution: Remove FreeBSD 13.1 and MacOS M1
Cirrus CI has started introducing monthly limits. Vim has exceeded the
monthly limit which means our CI unfortunately starts to fail. So let's
remove some CI tasks, so that in the future we won't run out of credits
so fast.
closes: #13108
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: dundargoc <gocdundar@gmail.com>
Fix the issue introduced by #12557. `:substitute` commands in plugins
need to take into account whether `gdefault` is set or not because
that depends on the user.
closes: #13097
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Coverity complains about dead code
Solution: Copy only object methods from the super class
to a subclass when extending a class. Fix
Coverity warning.
closes: #13103
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: win32: not correctly freeing environment
Solution: After we call GetEnvironmentStringsW, we should call
FreeEnvironmentStringsW
closes: #13096closes: #13094
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: potential buffer overflow in PBYTE macro
Solution: Check returned memline length
closes: #13083
the PBYTE macro is used to put byte c at a position lp of the returned
memline. However, in case of unexpected errors ml_get_buf() may return
either "???" or an empty line in which case it is quite likely that we
are causing a buffer overrun.
Therefore, switch the macro PBYTE (which is only used in ops.c anyhow)
to a function, that verifies that we will only try to access within the
given length of the buffer.
Also, since the macro is only used in ops.c, move the definition from
macros.h to ops.c
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: restrict access to static vars and methods
Solution: Class members are accesible only from the class where they are
defined.
Based on the #13004 discussion, the following changes are made:
1) Static variables and methods are accessible only using the class
name and inside the class where they are defined.
2) Static variables and methods can be used without the class name in
the class where they are defined.
3) Static variables of a super class are not copied to the sub class.
4) A sub class can declare a class variable with the same name as the
super class.
5) When a method or member is found during compilation, use more
specific error messages.
This aligns the Vim9 class variable/method implementation with the Dart
implementation.
Also while at it, ignore duplicate class and object methods.
The access level of an object method can however be changed in a
subclass.
For the tests, use the new CheckSourceFailure() function instead of the
CheckScriptFailure() function in the tests.
closes: #13086
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Add a small section about the distributed Editorconfig plugin at :h
usr_05.txt just below the matchit plugin. While editing that help
document, also add a bit of more documentation about standard plugins
and local help file additions.
Regenerate $VIMRUNTIME/doc/tags file with all the new tags from the rust
runtime files.
While at it, update the Editorconfig help page (and re-generate the
helptags file).
closes: #13078
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: confusing error with .= in compiled functions
Solution: Check in error condition, if .= was attempted and in that case
give a different error message.
closes: #12972closes: #13066
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: "below" virtual text doesn't work with 'rightleft'.
Solution: Use column from right border with 'rightleft'.
closes: #13071
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9: lookup code for class/object repaeated
Solution: Refactor and make use of lookup functions
closes: #13067
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Since https://docs.scala-lang.org/sips/42.type.html which is implemented
in Scala 2.13 and in Scala 3 it possible to use string literals as
singleton types. So code like
```
someFunc["abc"]
```
is valid. Currently this code is not hightlighted correctly and worse if
there is an unclosed `(` in the string it breaks the formating in the
rest of the file.
I also submitted this patch to the mentioned project for this runtime
file: https://github.com/derekwyatt/vim-scala/pull/173 But there are no
commits there over the last 2 years and no response in the week since I
created it. Also the last change to the Scala syntax file:
https://github.com/vim/vim/pull/9594 is yet to be backported to that
repo. Therefore I am opening this PR as well to get some feedback on how
to proceed to get this fixed.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Problem trying to invoke class method
Solution: Lookup the class method insider other classes
closes: #13055
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: class members are accessible via object
Solution: Disable class member variable access using an object
Class methods can be accessed only using the class name and cannot be
accessed using an object. To be consistent with this, do the same for
class member variables also. They can be accessed only using the class
name and not using an object.
closes: #13057
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: no support for abstract methods
Solution: Add support for defining abstract methods in an abstract class
closes: #13044closes: #13046
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Modified behavior:
- Change default value of g:html_use_input_for_pc from "fallback" to
"none". This means with default settings, only the standards-based
method to make special text unselectable is used. The old method
relying on unspecified browser behavior for <input> tags is now only
used if a user specifically enables it.
- Officially deprecate g:use_xhtml option (in favor of
g:html_use_xhtml) by issuing a warning message when used.
Bugfixes:
- Fix issue #8547: LineNr and other special highlight groups did not
get proper style rules defined when using "hi link".
- Fix that diff filler was not properly added for deleted lines at the
end of a buffer.
Other:
- Refactored function definitions from long lists of strings to use
:let-heredoc variable assignment instead.
- Corrected deprecated "." string concatenation operator to ".."
operator in more places.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong order of arguments for error messages
Solution: Reverse order or arguments for e_aptypes_is_null_nr_str
closes: #13051
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: Vim9: Calling an interface method using a child object fails
Solution: Search methods of parent class
When a class implementing an interface is extended by another class and
a child class instance is passed to a function that accepts the
interface, calling an interface method doesn't work properly.
closes: #13053
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Trailing white space in tests
Solution: Delete it
This causes test_codestyle to fail, so we need to remove it again.
Hopefully that makes the CI green again.
Note: I will start using annotated tags from now on.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Need more tests for inheritance
Solution: Add access tests and fixes.
`inside_class` fix from yegappan. `object_index_from_itf_index` fix
access of member on class extending class implementing interface.
Based on tests from Vim9: Class/Object member variable access control #12979closes: #13032
related: #12979
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
This is a followup to 816fbcc262 (patch
9.0.1833: [security] runtime file fixes)
It basically disables that external commands are run on loading of the
filetype plugin, **unless** the user has set the `g:plugin_exec = 1`
global variable in their configuration or for a specific filetype the
variable g:<filetype>_exec=1.
There are a few more plugins, that may execute system commands like
debchangelog, gitcommit, sh, racket, zsh, ps1 but those do at least
do not run those commands by default during loading of the filetype plugin
(there the command is mostly run as convenience for auto-completion or
to provide documentation lookup).
closes: #13034
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Tim Pope <vim@tpope.org>
Problem: Vim9: incorrect duplicate class member detection
Solution: Incorrect duplicate class member detection when variable names
have the same prefix. Not able to access class member variables
using an object. Fix coding style issues
closes: #13042
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: missing test for patch 9.0.1873
Solution: add a test trying to exchange windows
Add a test, making sure that switching windows is not allowed when
textlock is active, e.g. when running `:s/<pat>/\=func()/`
Signed-off-by: Christian Brabandt <cb@256bit.org>
In case the current directory is present as valid $PATH entry, it is OK
to call the program from it, even if vim curdir is in that same
directory.
(Without that patch, for instance, you will not be able to open .zip
files while your current directory is /bin)
closes: #13027
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: parsing commands with newlines wrong
Solution: Accept a '\n' for parsing lists and command arguments
closes: #13015closes: #13020
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: improve test for disassemble + static
Solution: Add a Vim9 script disassemble test for an interface with
static members
closes: #13037
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: CI may fail in test_recover_empty_swap
Solution: Set directory option
Fix failing Test_recover_empty_swap test
:recover by default not only looks in the current directory, but also in
~/tmp for files to recover. If it finds some files to recover, it will
interactively prompt for a file to recover. However, prompting doesn't
work when running the test suite (and even if it would, there is no one
that can answer the prompt).
So it doesn't really make sense during testing, to inspect different
directories for swap files and prompt and wait (which will lead to a
timeout and therefore a failing test).
So set the 'directory' option temporarily to the current directory only
and reset it back once the test finishes.
closes: #13038
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: heap-buffer-overflow in vim_regsub_both
Solution: Disallow exchanging windows when textlock is active
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Github CI does not run i386 job
Solution: Add a i386 architecture
Add CI testing for i386
message_test recently failed on i386, which exposed a gap in the CI
testing. Convert the shadowdir job to one that runs on i386 so we get
32-bit test coverage.
Since the GHA runners are x86_64, we can enable the i386 architecture
in dpkg and install i386 packages for the i386 CI jobs. However, this
can't currently be done with features=huge since that would require
installing python3-dev:i386, which breaks the CI environment.
closes: #12975
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: Vim9: disassamble does not show static
Solution: Show static flag
Fix disassemble for instructions with optional static:
ISN_GET_OBJ_MEMBER and ISN_GET_ITF_MEMBER
closes: #13030
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Previous PR (#12993) fixed localization files to point to "Open &Tab..."
but they didn't add the shortcut key to the translated names. This adds
the shortcut keys to the CJK translations in the form of "(&T)".
Note that this doesn't add the shortcut to latin script languages like
Czech. These types of translated names tend to also localize the
shortcut keys for them to make sense to the user and it's up to each
translator to decide how to do so. CJK translations tend to just take
the English key directly since it doesn't make sense to have a localized
shortcut key in general.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity warns about unitialized var
Solution: initialize it
closes: #13029
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Vim9: access to interface statics possible
Solution: Prevent direct access to interface statics
closes: #13007
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Undo is synced after character find.
Solution: Set no_u_sync when calling gotchars_nop().
closes: #13022closes: #13024
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Changes:
1.75:
- Fix2072/PHP-Indenting-for-VIm#87: The indent optimization was causing wrong indentation of lines
preceded by a line ending with '}' when preceded by non white characters.
- Fix long standing non-reported regex escaping issue in cleaning end of line
comments function. This should help fixing some other unreported issues when
parts of codes are commented out at ends of lines...
1.74:
- Fix2072/PHP-Indenting-for-VIm#86: Add support for `match` expression.
1.73:
- Fix2072/PHP-Indenting-for-VIm#77 where multi line strings and true/false keywords at beginning of a
line would cause indentation failures.
1.72:
- Fixvim/vim#5722 where it was reported that the option PHP_BracesAtCodeLevel
had not been working for the last 6 years.
1.71:
- Fix2072/PHP-Indenting-for-VIm#75 where the indent script would hang on some multi-line quoted strings.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: garbage collection may cause crash
Solution: validate that class members typeval is not null
closes: #13028
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: crash with bt_quickfix1_poc when cleaning up
and EXITFREE is defined
Solution: Test if buffer is valid in a window, else close
window directly, don't try to access buffer properties
While at it, increase the crash timeout slightly, so that CI has a
chance to finish processing the test_crash() test.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: wrong format specifiers in e_aptypes_is_null_str_nr
Solution: Fix the wrong format specifier
closes: #13020
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9 Garbage Collection issues
Solution: Class members are garbage collected early leading to
use-after-free problems. Handle the garbage
collection of classes properly.
closes: #13019
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: mode() doesn't indicate command line for terminal
Solution: make it return 'ct' for command-line from Terminal mode
closes: #6265closes: #13017closes: #13018
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: h-east <h.east.727@gmail.com>
Problem: test_crash1() fails on CI
Solution: don't run Screendump test, verify that it doesn't crash
by running it through a shell command line, testing
the exit value and concatenating success cmd using '&&'
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI error on different signedness in regexp.c
(after patch 9.0.1848)
Solution: Cast strlen() call to int
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: i_CTRL-O does not reset Select Mode
Solution: Reset select mode on CTRL-O in insert mode
closes: #13001closes: #12115
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Virtual text at a column causes 'breakindent' and 'showbreak'
to be missing (after patch 9.0.1124).
Solution: Add check for "tp_col" in another place where TP_FLAG_WRAP is
checked.
closes: #12769closes: #13008closes: #13010
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9: wrong line number where options set
Solution: Set source line number earlier
closes: #13006closes: #13013
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: doc helptags may not be up to date
Solution: Add CI jobs to verify helptags are updated
Also, re-generate the tags file with updated list so it will pass CI.
closes: #13012
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Need more accurate profiling
Solution: Improve profiling results
closes: #12192
Reduce overhead of checking if a function should be profiled,
by caching results of checking (which are done with regexp).
Cache uf_hash for uf_name in ufunc_T.
Cache cleared when regexps are changed.
Break at first match for has_profiling lookup.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Vim9: Cannot modify class member vars from def function
Solution: Add support for modifying class member variables from a def
function
closes: #12995
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Improve it by the following:
1) Also check xxd source
2) Test_source_files():
don't stop on the first error found, continue until the
end of the file and report all found errors like this:
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: class_member_type() can be optimized
Solution: class_member_type() provides more information;
safe an additional alloc()/free()
closes: #12989
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
THe menu item "Open Tab..." was changed to "Open &Tab..." in #12895 but
localization files were not updated. Update it here.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong display with "above" virtual text and 'linebreak' or
'breakindent' and 'showbreak'.
Solution: Exclude size of "above" virtual text when calculating them.
closes: #13000
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Perl interface has problems with load PL_current_context
Solution: Fix Perl interface to load PL_current_context from library
In #12914, in order to fix an issue with Perl 5.36 dynamic builds, (that
version introduced a thread-local `PL_current_context`), the file added
the variable manually so we can satisfy the linker. However, the
variable is a different one from the one in the library, so there could
be unpredictable behavior. Instead, just use `dlsym` to load the context
from the library. The fact that it's thread-local doesn't matter too
much to us because Vim's interface is single-threaded so it will work
properly.
closes: #12996
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Some problems with xxd coloring
Solution: Fix the following problems:
* Support colored output on Windows.
SetConsoleMode() is required to enable ANSI color sequences.
* Support "NO_COLOR" environment variable.
If "NO_COLOR" is defined and not empty, colored output should be
disabled.
See https://no-color.org/
* "-R" should only accept "always", "never" or "auto" as the parameter.
* Adjust help and documentation. "-R" cannot omit the parameter. Remove
surrounding brackets.
Related #12131closes: #12997closes: #12991closes: #12986
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: K.Takata <kentkt@csc.jp>
While making changes to the ruby ftplugin, slightly change the exepath()
conditional from patch 9.0.1833 and move it after the :cd invocation.
closes: 12981
closes: 12994
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Tim Pope <code@tpope.net>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: runtime files may execute code in current dir
Solution: only execute, if not run from current directory
The perl, zig and ruby filetype plugins and the zip and gzip autoload
plugins may try to load malicious executable files from the current
working directory. This is especially a problem on windows, where the
current directory is implicitly in your $PATH and windows may even run a
file with the extension `.bat` because of $PATHEXT.
So make sure that we are not trying to execute a file from the current
directory. If this would be the case, error out (for the zip and gzip)
plugins or silently do not run those commands (for the ftplugins).
This assumes, that only the current working directory is bad. For all
other directories, it is assumed that those directories were
intentionally set to the $PATH by the user.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: failing null test
Solution: Use required public keyword
closes: #12982
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gianmaria Bajo <mg1979.git@gmail.com>
Problem: Vim9: crash when accessing a null object
Solution: Check accessing a NULL object in def function
An object is NULL when the variable is declared, but the constructor
isn't called. Accessing/setting a member on the object crashed Vim.
Note: this happens inside def functions, at script level things work
differently. Accessing a NULL object member results in E1360
(correctly), while setting a value on it results in E1012 (type
mismatch) so there's still something to fix.
closes: #12973
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gianmaria Bajo <mg1979.git@gmail.com>
Problem: Vim9 missing access-checks for private vars
Solution: Use the proper check for private/readonly variable. Access
level for a member cannot be changed in a class implementing an
interface. Update the code indentation
closes: #12978
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Wrong cursor position with virtual text before double-width
char at window edge.
Solution: Check for double-width char before adding virtual text size.
closes: #12977
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: xxd: no color support
Solution: Add color support using xxd -R
Add some basic color support for xxd
The hex-value and value are both colored with the same color depending
on the hex-value, e.g.:
0x00 = white
0xff = blue
printable = green
non-printable = red
tabs and linebreaks = yellow
Each character needs 11 more bytes to contain color. (Same color in a
row could contain only one overhead but the logic how xxd creates colums
must be then changed.) Size of colored output is increased by factor of
~6. Also grepping the output will break when colors is used.
Flag for color is "-R", because less uses "-R".
Color uses parameters auto,always,never same as less and grep (among
others).
E.g.
xxd -R always $FILE | less -R
Add some screen-tests (that currently on work on linux) to verify the
feature works as expected.
closes: #12131
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Aapo Rantalainen <aapo.rantalainen@gmail.com>
Problem: keytrans() doesn't translate recorded key typed in a GUI
Solution: Handle CSI like K_SPECIAL, like in mb_unescape()
closes: #12964closes: #12966
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Wrong cursor position with virtual text before a whitespace
character and 'linebreak'.
Solution: Always set "col_adj" to "size - 1" and apply 'linebreak' after
adding the size of 'breakindent' and 'showbreak'.
closes: #12956
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9: private members may be modifiable
Solution: prevent modification for def function
closes: #12963
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Autoconf 2.69 too old
Solution: Migrate to Autoconf 2.71
Autoconf 2.69 is almost 10 years old. And 2.71 is also a few years old
as well. Should be pretty well tested by now. It brings a lot of
improvements and there seems to be an ongoing work on autoconf 2.72
already.
This change just addresses two minor changes `autoupdate` suggested, and
then `src/auto/configure` is regenerated by running
cd src
make AUTOCONF=autoconf2.71 autoconf
closes: #12958
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: Vim9: no check for duplicate members in extended classes
Solution: Check for duplicate members in extended classes.
Fix memory leak.
closes: #12948
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9 constructors are always static
Solution: make the "static" keyword an error
closes: #12945
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gianmaria Bajo <mg1979.git@gmail.com>
Problem: Rexx files may not be recognised
Solution: Add shebang detection and improve disambiguation of *.cls
files
closes: #12951
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Github CI too complex
Solution: CI: Tidy up matrix
Perform the following changes to the CI configuration:
- Move common CFLAGS to ci/config.mk.sed
- Change extra key to array to able to assign no or multiple values
explicitly
- Modify luaver variable handling
- lib${{ matrix.luaver }}-dev ${{ matrix.luaver }} are confusing
as package names
- Deduplicate CONFOPT setting
closes: #12955
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: ichizok <gclient.gaap@gmail.com>
Problem: dynamically linking perl is broken
Solution: Fix all issues
This is a combination of several commits:
1) Fix if_perl.xs not being able to build on all versions of Perl (5.30)
This fixes the dynamic builds of Perl interface. The Perl interface file
previously had to manually copy and paste misc inline functions verbatim
from the Perl headers, because we defined `PERL_NO_INLINE_FUNCTIONS`
which prevents us form getting some function definitions. The original
reason we defined it was because those inline functions would reference
Perl functions that would cause linkage errors.
This is a little fragile as every time a new version of Perl comes out,
we inevitably have to copy over new versions of inline functions to our
file, and it's also easy to miss updates to existing functions.
Instead, remove the `PERL_NO_INLINE_FUNCTIONS` define, remove the manual
copy-pasted inline functions. Simply add stub implementations of the
missing linked functions like `Perl_sv_free2` and forward them to the
DLL version of the function at runtime. There are only a few functions
that need this treatment, and it's a simple stub so there is very low
upkeep compared to copying whole implementations to the file.
Also, fix the configure script so that if we are using dynamic linkage,
we don't pass `-lperl` to the build flags, to avoid accidental external
linkage while using dynamic builds. This is similar to how Python
integration works.
2) Fix GIMME_V deprecation warnings in Perl 5.38
Just use GIMME_V, and only use GIMME when using 5.30 to avoid needing to
link Perl_block_gimme. We could provide a stub like the other linked
functions like Perl_sv_free2, but simply using GIMME is the simplest and
it has always worked before.
3) Fix Perl 5.38 issues
Fix two issues:
3.1. Perl 5.38 links against more functions in their inline headers, so we
need to stub them too.
3.2. Perl 5.38 made Perl_get_context an inline function, but *only* for
non-Windows build. Fix that. Note that this was happening in Vim
currently, as it would build, but fail to run Perl code at runtime.
4) Fix Perl 5.36/5.38 when thread local is used
Perl 5.36 introduced using `_Thread_local` for the current context,
which causes inline functions to fail. Create a stub
`PL_current_context` thread local variable to satisfy the linker for
inlined functions. Note that this is going to result in a different
`PL_current_context` being used than the one used in the library, but so
far from testing it seems to work.
5) Add docs for how to build Perl for dynamic linking to work
closes: #12827closes: #12914
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: configure: sed uses non-portable regex
Solution: use '*' modifier instead of '\?' in regex
for luajit version detection
closes: #12954
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: ichizok <gclient.gaap@gmail.com>
Remove the test suite and a few other non-used files from the
EditorConfig CI project
related: #12902
closes: #12941
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: pango_coverage_unref() deprecated in pango > 1.51
Solution: use g_object_unref() instead
closes: #12942
Free PangoCoverage with g_object_unref for Pango >= 1.52
pango_coverage_unref was declared deprecated in Pango 1.52.0 in favor of
g_object_unref. Adjust the call when building against a new enough
Pango to avoid the deprecation warning.
Signed-off-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9 no error on duplicate object member var
Solution: detect duplicate members and error out
closes: #12938
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: 'linebreak' is incorrectly drawn after 'breakindent'.
Solution: Don't include 'breakindent' size when already after it.
closes: #12937closes: #12940
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: CI still fails with sodium_mlock error()
Solution: Catch and ignore E1230 error in test_crypt
closes: #12939
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: still some issues with term_debug test
Solution: Use WaitForAssert()
closes: #12936
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: camel-case spelling has issues with digits
Solution: Improve the camCase spell checking by taking digits
and caps into account
Rewrite the conditions to check for word boundaries by taking into
account the presence of digits and all-caps sequences such as acronyms.
closes: #12644closes: #12933
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Comment in scripts.vim is outdated
Solution: Delete the comment
runtime/autoload/dist/script.vim is now Vim9 script so =~ does not use
'ignorecase'.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: bogus error on export
Solution: Don't error out when the export command is not executed
closes: #12912closes: #12930
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Vim9: problem compiling object method as function call arg
Solution: After a object/class method call, remove the object/class from
the stack.
closes: #12081closes: #12929
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: no support for private object methods
Solution: Add support for private object/class methods
closes: #12920
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Multiline regex with Visual selection fails when Visual
selection contains virtual text after last char.
Solution: Only include virtual text after last char when getting full
line length.
closes: #12908
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9 instanceof() fails in a def func
Solution: allow Objects in compile time check
closes: #12907
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Cursor position still wrong with 'showbreak' and virtual text
after last character or 'listchars' "eol".
Solution: Remove unnecessary w_wcol adjustment in curs_columns(). Also
fix first char of virtual text not shown at the start of a screen
line.
closes: #12478closes: #12532closes: #12904
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Russian menu translation can be improved
Solution: update the Russian menu files
closes: #12903
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: RestorerZ <restorer@mail2k.ru>
Problem: autoconf: not correctly detecing include dirs
Solution: make use of python3 to generate includedirs
configure: Python3: Use sysconfig for -I
It seems better to use tools provided by Python for determining the
include directories, rather than construct them "manually".
Current system is broken when using virtual environments for python
3.11.4. It used to work before, but now it detects a incorrect value
for `-I`.
It would probably make sense to switch to a similar logic for lib
folders, that is for the `-l` switch. There are also
`sysconfig.get_config_h_filename()` and
`sysconfig.get_makefile_filename()`, that could replace more Python
specific logic in the current `configure{.ac,}`.
sysconfig provides the necessary tools since Python 2.7.
closes: #12889
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: obsolete macros in configure script
Solution: Remove those and start moving to autoconf 2.71
src/configure.ac: Remove obsolete macros
These macros are declared obsolete in autoconf 2.69, which is almost 10
years old by now:
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Obsolete-Macros.html
They generate warnings when in a subsequent upgrade to autoconf 2.71.
`autoupdate` from autoupdate 2.71 suggests most of these changes, except
that it also adds obsolete warnings, that where individually checked and
removed.
Regenerated `src/auto/configure` by running:
cd src
autoconf2.69 --output=auto/configure configure.ac
sed --in-place --expression='s@>config.log@>auto/config.log@g' auto/configure
closes: #12888
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: No tests for the termdebug plugin
Solution: Add some simple tests for the termdebug plugin
closes: #12927
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: The Content-Type header is an optional header that some LSP
servers struggle with and may crash when encountering it.
Solution: Drop the Content-Type header from all messages, because we use
the default value anyway.
Because pretty much all popular LSP clients (e.g. coc.nvim, VSCode) do
not send the Content-Type header, the LSP server ecosystem has developed
such that some LSP servers may even crash when encountering it.
To improve compatibility with these misbehaving LSP servers, we drop
this header as well.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Magnus Groß <magnus@mggross.com>
Problem: too early declaration of variable in pum_set_selected()
Solution: Move declaration to where it is actually used
closes: #12915
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: mathew <glephunter@gmail.com>
Problem: C4090 warnings in strings.c
Solution: Add type casts
closes: #12917
MSVC shows the following warnings:
```
strings.c(2436): warning C4090: 'function': different 'const' qualifiers
strings.c(2774): warning C4090: 'function': different 'const' qualifiers
strings.c(3865): warning C4090: 'function': different 'const' qualifiers
```
So add type casts to suppress them.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken .Takata <kentkt@csc.jp>
Problem: Cannot build with latest luajit
Solution: adjust sed regexp and don't expect '-' in version output
closes: #12896
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: need instanceof() function
Solution: Implement instanceof() builtin
Implemented in the same form as Python's isinstance because it allows
for checking multiple class types at the same time.
closes: #12867
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: wrong cursor position with 'showbreak' and lcs-eol
Solution: Add size of 'showbreak' before when 'listchars' "eol" is used.
Also fix wrong cursor position with wrapping virtual text on
empty line and 'showbreak'.
closes: #12891
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
- Fix and attempt to simplify :Frame/:Up/:Down documentation.
- Accept a count instead for :Up/:Down/+/-.
- Update the "Last Change" dates.
- Fix a missing :let (caused an error if gdb fails to start).
- Wipe the prompt buffer when ending prompt mode (if it exists and wasn't wiped
by the user first). Avoids issues with stale prompt buffers (such as E95 when
starting a new prompt mode session).
- Kill the gdb job if the prompt buffer is unloaded (similar to what's done for
a terminal buffer). Fixes not being able to start a new termdebug session if
the buffer was wiped by the user, for example.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Seems missing as noted by Antonio Giovanni Colombo. So add it and use
the 'T' as shortcut, which does not seem to be used in the File dialog.
Verified on Windows.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Antonio Giovanni Colombo <azc100@gmail.com>
They were linked using 'hi link' which made it impossible for color
schemes to override highlight groups.
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Add support for APL type in runtime/syntax/bindzone.vim
- all values between 0- 4294967295 are valid serials
closes: #9743closes: #8382
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong display with wrapping virtual text or unprintable chars,
'showbreak' and 'smoothscroll'.
Solution: Don't skip cells taken by 'showbreak' in screen lines before
"w_skipcol". Combined "n_skip" and "skip_cells".
closes: #12597
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: prop_list() does not return text_padding_left
Solution: Store and return the text_padding_left value for text
properties
closes: #12870
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Problems when setting bin/paste option
Solution: When setting binary/paste, remember that this also affects
depending options, so that :verbose set returns the right
location.
Mention if depending options for 'binary' or 'paste' have been reset
indirectly. Add a test to verify it works.
Also noticed as small bug, that the global option value for expandtab
was not reset when paste option is set, so fix that while at it.
closes: #12837closes: #12879
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9 type not defined during object creation
Solution: Define type during object creation and not during class
definition, parse mulit-line member initializers, fix lock
initialization
If type is not specified for a member, set it during object creation
instead of during class definition. Add a runtime type check for the
object member initialization expression
Also, while at it, when copying an object or class, make sure the lock
is correctly initialized.
And finally, parse multi-line member initializers correctly.
closes: #11957closes: #12868closes: #12869closes: #12881
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Need more state() tests
Solution: Add a few more tests for operater pending mode and register
yank command
closes: #12883
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: author
* Fix some Termdebug issues after #12403
Problem: Cleanup for :Var and :Asm buffers did not apply to prompt mode, and
E86 was possible if they were hidden.
Solution: Move cleanup to s:EndDebugCommon. Check that the buffers exist before
switching.
* Fix :Asm in Termdebug prompt mode
Problem: :Asm does not work in prompt mode.
Solution: Make it work by handling disassembly-related messages properly.
The previous implementation depended on the typed or sent (via s:SendCommand())
"disassemble ..." message being visible to s:CommOutput(), but this was only
true for the terminal-based job.
A more robust solution would be to use GDB MI's -data-disassemble command. I may
implement this in a future PR.
* Fix Termdebug s:DecodeMessage escaping logic
Problem: Termdebug does not escape gdb messages properly.
Solution: Improve the logic. Do not mangle messages if they have inner escaped
quotes. Use line continuation comments properly.
Interestingly, due to the missing line continuation comments (`"\`), most of
these substitutions were ignored.
Presumably, this logic still isn't exact. For example, if a message ends in
`\\"`, the quote may be preserved, even though it's the `\` being escaped
(similar issues may exist for the other escapes). This may not be a problem in
practice, though.
Commit dd0ad25988 introduced
line-continuation. However, to make sure this does not cause an error
when Vim is run in compatible mode, we need to set compatibility mode
temporarily and reset it back when finished reading the file.
This fixes: https://groups.google.com/g/vim_use/c/9zccgo_RIqM/m/xlUmhBktBgAJ
Signed-off-by: Christian Brabandt <cb@256bit.org>
The single quote `'` is a valid character in variable names, so it should be included in `iskeyword`; this, for instance, makes the <kbd>*</kbd> command behave predictably
Problem: No support for stable Python 3 ABI
Solution: Support Python 3 stable ABI
Commits:
1) Support Python 3 stable ABI to allow mixed version interoperatbility
Vim currently supports embedding Python for use with plugins, and the
"dynamic" linking option allows the user to specify a locally installed
version of Python by setting `pythonthreedll`. However, one caveat is
that the Python 3 libs are not binary compatible across minor versions,
and mixing versions can potentially be dangerous (e.g. let's say Vim was
linked against the Python 3.10 SDK, but the user sets `pythonthreedll`
to a 3.11 lib). Usually, nothing bad happens, but in theory this could
lead to crashes, memory corruption, and other unpredictable behaviors.
It's also difficult for the user to tell something is wrong because Vim
has no way of reporting what Python 3 version Vim was linked with.
For Vim installed via a package manager, this usually isn't an issue
because all the dependencies would already be figured out. For prebuilt
Vim binaries like MacVim (my motivation for working on this), AppImage,
and Win32 installer this could potentially be an issue as usually a
single binary is distributed. This is more tricky when a new Python
version is released, as there's a chicken-and-egg issue with deciding
what Python version to build against and hard to keep in sync when a new
Python version just drops and we have a mix of users of different Python
versions, and a user just blindly upgrading to a new Python could lead to
bad interactions with Vim.
Python 3 does have a solution for this problem: stable ABI / limited API
(see https://docs.python.org/3/c-api/stable.html). The C SDK limits the
API to a set of functions that are promised to be stable across
versions. This pull request adds an ifdef config that allows us to turn
it on when building Vim. Vim binaries built with this option should be
safe to freely link with any Python 3 libraies without having the
constraint of having to use the same minor version.
Note: Python 2 has no such concept and this doesn't change how Python 2
integration works (not that there is going to be a new version of Python
2 that would cause compatibility issues in the future anyway).
---
Technical details:
======
The stable ABI can be accessed when we compile with the Python 3 limited
API (by defining `Py_LIMITED_API`). The Python 3 code (in `if_python3.c`
and `if_py_both.h`) would now handle this and switch to limited API
mode. Without it set, Vim will still use the full API as before so this
is an opt-in change.
The main difference is that `PyType_Object` is now an opaque struct that
we can't directly create "static types" out of, and we have to create
type objects as "heap types" instead. This is because the struct is not
stable and changes from version to version (e.g. 3.8 added a
`tp_vectorcall` field to it). I had to change all the types to be
allocated on the heap instead with just a pointer to them.
Other functions are also simply missing in limited API, or they are
introduced too late (e.g. `PyUnicode_AsUTF8AndSize` in 3.10) to it that
we need some other ways to do the same thing, so I had to abstract a few
things into macros, and sometimes re-implement functions like
`PyObject_NEW`.
One caveat is that in limited API, `OutputType` (used for replacing
`sys.stdout`) no longer inherits from `PyStdPrinter_Type` which I don't
think has any real issue other than minor differences in how they
convert to a string and missing a couple functions like `mode()` and
`fileno()`.
Also fixed an existing bug where `tp_basicsize` was set incorrectly for
`BufferObject`, `TabListObject, `WinListObject`.
Technically, there could be a small performance drop, there is a little
more indirection with accessing type objects, and some APIs like
`PyUnicode_AsUTF8AndSize` are missing, but in practice I didn't see any
difference, and any well-written Python plugin should try to avoid
excessing callbacks to the `vim` module in Python anyway.
I only tested limited API mode down to Python 3.7, which seemes to
compile and work fine. I haven't tried earlier Python versions.
2) Fix PyIter_Check on older Python vers / type##Ptr unused warning
For PyIter_Check, older versions exposed them as either macros (used in
full API), or a function (for use in limited API). A previous change
exposed PyIter_Check to the dynamic build because Python just moved it
to function-only in 3.10 anyway. Because of that, just make sure we
always grab the function in dynamic builds in earlier versions since
that's what Python eventually did anyway.
3) Move Py_LIMITED_API define to configure script
Can now use --with-python-stable-abi flag to customize what stable ABI
version to target. Can also use an env var to do so as well.
4) Show +python/dyn-stable in :version, and allow has() feature query
Not sure if the "/dyn-stable" suffix would break things, or whether we
should do it another way. Or just don't show it in version and rely on
has() feature checking.
5) Documentation first draft. Still need to implement v:python3_version
6) Fix PyIter_Check build breaks when compiling against Python 3.8
7) Add CI coverage stable ABI on Linux/Windows / make configurable on Windows
This adds configurable options for Windows make files (both MinGW and
MSVC). CI will also now exercise both traditional full API and stable
ABI for Linux and Windows in the matrix for coverage.
Also added a "dynamic" option to Linux matrix as a drive-by change to
make other scripting languages like Ruby / Perl testable under both
static and dynamic builds.
8) Fix inaccuracy in Windows docs
Python's own docs are confusing but you don't actually want to use
`python3.dll` for the dynamic linkage.
9) Add generated autoconf file
10) Add v:python3_version support
This variable indicates the version of Python3 that Vim was built
against (PY_VERSION_HEX), and will be useful to check whether the Python
library you are loading in dynamically actually fits it. When built with
stable ABI, it will be the limited ABI version instead
(`Py_LIMITED_API`), which indicates the minimum version of Python 3 the
user should have, rather than the exact match. When stable ABI is used,
we won't be exposing PY_VERSION_HEX in this var because it just doesn't
seem necessary to do so (the whole point of stable ABI is the promise
that it will work across versions), and I don't want to confuse the user
with too many variables.
Also, cleaned up some documentation, and added help tags.
11) Fix Python 3.7 compat issues
Fix a couple issues when using limited API < 3.8
- Crash on exit: In Python 3.7, if a heap-allocated type is destroyed
before all instances are, it would cause a crash later. This happens
when we destroyed `OptionsType` before calling `Py_Finalize` when
using the limited API. To make it worse, later versions changed the
semantics and now each instance has a strong reference to its own type
and the recommendation has changed to have each instance de-ref its
own type and have its type in GC traversal. To avoid dealing with
these cross-version variations, we just don't free the heap type. They
are static types in non-limited-API anyway and are designed to last
through the entirety of the app, and we also don't restart the Python
runtime and therefore do not need it to have absolutely 0 leaks.
See:
- https://docs.python.org/3/whatsnew/3.8.html#changes-in-the-c-api
- https://docs.python.org/3/whatsnew/3.9.html#changes-in-the-c-api
- PyIter_Check: This function is not provided in limited APIs older than
3.8. Previously I was trying to mock it out using manual
PyType_GetSlot() but it was brittle and also does not actually work
properly for static types (it will generate a Python error). Just
return false. It does mean using limited API < 3.8 is not recommended
as you lose the functionality to handle iterators, but from playing
with plugins I couldn't find it to be an issue.
- Fix loading of PyIter_Check so it will be done when limited API < 3.8.
Otherwise loading a 3.7 Python lib will fail even if limited API was
specified to use it.
12) Make sure to only load `PyUnicode_AsUTF8AndSize` in needed in limited API
We don't use this function unless limited API >= 3.10, but we were
loading it regardless. Usually it's ok in Unix-like systems where Python
just has a single lib that we load from, but in Windows where there is a
separate python3.dll this would not work as the symbol would not have
been exposed in this more limited DLL file. This makes it much clearer
under what condition is this function needed.
closes: #12032
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: no support for custom cmdline completion
Solution: Add new vimscript functions
Add the following two functions:
- getcmdcompltype() returns custom and customlist functions
- getcompletion() supports both custom and customlist
closes: #12228
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: Cursor is adjusted in window that did not change in size by
'splitkeep'.
Solution: Only check that cursor position is valid in a window that
has changed in size.
closes: #12509
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Luuk van Baal <luukvbaal@gmail.com>
Problem: regex: combining chars in collections not handled
Solution: Check for following combining characters for NFA and BT engine
closes: #10459closes: #10286
Signed-off-by: Christian Brabandt <cb@256bit.org>
Perform the lookahead in `nixInheritAttributeScope`, then hand over to a
new region called `nixInheritAttributeSubExpr`, which sets the match
start to one char after the opening bracket to avoid a double-match.
Finally, only do a lookahead to `)` in `nixInheritAttributeSubExpr` (and
thus make sure the region is closed to not get a match of `nixParen`
here) and let `nixInheritAttributeScope` close the bracket.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Runtime: no support for bicep files
Solution: Add filetype support for bicepparam
closes: #12784
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Scott McKendry <scott.c.mckendry@gmail.com>
Problem: '.-' no allowed in highlight group names
Solution: Allow dot and hyphen characters in highlight group names
Allow dots and hyphens in group names. There does not seem
to be any reason for these to be disallowed.
closes: #12807
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: Runtime: Missing QML support
Solution: Add QML support to Vim
closes: #12810
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: ChaseKnowlden <haroldknowlden@gmail.com>
Problem: Error when cross-compiling Vim
Solution: use AC_CHECK_SIZEOF to find sizeof(wchar_t)
This fixes an error when cross compiling.
closes: #12828
Bug: https://bugs.gentoo.org/889430
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI: label should not be set on all yml files
Solution: only set it for specific yml files in .github
closes: #12855
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Philip H <47042125+pheiduck@users.noreply.github.com>
Problem: crash when passing invalid buffer to undotree()
Solution: Use get_buf_arg() instead of tv_get_buf_from_arg().
closes: #12862closes: #12830
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Not able to get the virtual text property
Solution: Make prop_list() return virtual text and alignment
closes: #12860
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: g<kEnd> behaves different from g<end>
Solution: Make g<kEnd> behave like g<End>
closes: #12861
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: vim9 class problem with new() constructor
Solution: Don't allow a return type for the new() class constructor.
closes: #12863closes: #12040
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Visual highlight not working with cursor at end of screen line
and 'showbreak'.
Solution: Only update "vcol_prev" when drawing buffer text.
closes: #12865
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: vim9 no class identifiers in stack dumps
Solution: Prefix class members in stack traces with the class name
followed by a dot.
closes: #12866closes: #12078
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: ex_class() function is too long
Solution: refactor it
closes: #12858
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: failing cursorline sign test
Solution: only reset char attr, if cursorline
option is not set
Unfortunately, commit dbeadf05b6 causes a
failure with the sign test Test_sign_cursor_position()
The root cause is, that resetting the character attribute will also
reset the existing cursor line highlighting and this breaks the test,
that expects the cursor line highlighting to overrule the sign line
highlighting.
So change the condition to reset the character attribute by making sure
that this only happens, if the 'cursorline' option is not active and the
cursor is not at the same line as the line to be drawn
closes: #12854closes: #12859
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: can't move to last non-blank char
Solution: Make g<end> behave like that
Make it possible to move to last non-blank char on a line
We can distinguish between g0 and g^ to move to the very first character
and the first non-blank char.
And while we can move to the last screen char, we cannot go to the last
non-blank screen char.
Since I think g$ is the more widely used and known movement command (and
g<end> is synonymous to it) change the behaviour of g<end> to move to
last non-screen char instead and don't have this be the same command as
the g$ command anymore.
If you want to keep the old behaviour, you can use:
```
nnoremap g<end> g$
```
Add a test to verify the behaviour.
closes: #12593
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI: Coveralls is no longer used
Solution: Remove .coveralls.yml
Coveralls is no longer used, we ditched using it in patch v9.0.1547,
commit 12eb0f4ec5 issue #12389
So let's remove the .coveralls.yml file, it does not seem useful
anymore.
closes: #12851
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Text property highlight doesn't override a sign highlight over
a tab character
Solution: Let text_property override tab highlighting
This fixes a few problems of text properties:
- text property highlighting when override=true does not overwrite TAB
highlighting
- text property highlighting when override=true does not overwrite TAB
highlighting with :set list
- text property highlighting is used instead of sign highlight after
the actual text ends when signs are present with linehl is set
closes: #21584closes: #21592
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: screenpos() may cause unnecessary redraw.
Solution: Don't unnecessarily reset VALID_WROW flag.
VALID_WROW flag is only used by two functions: validate_cursor() and
cursor_valid(), and cursor_valid() is only used once in ex_sleep().
When adjust_plines_for_skipcol() was first added in patch 9.0.0640, it
was called in two functions: comp_botline() and curs_rows().
- comp_botline() is called in two places:
- onepage(), which resets VALID_WROW flag immediately afterwards.
- validate_botline_win(), where resetting a VALID_ flag is strange.
- curs_rows() is called in two places:
- curs_columns(), which sets VALID_WROW flag afterwards.
- validate_cline_row(), which is only used by GUI mouse focus.
Therefore resetting VALID_WROW there doesn't seem to do anything useful.
Also, a w_skipcol check (which resets VALID_WROW flag) was added to
check_cursor_moved() in patch 9.0.0734, which seems to make more sense
than resetting that flag in the middle of a computation.
While at it make adjust_plines_for_skipcol() and textpos2screenpos() a
bit less confusing:
- Make adjust_plines_for_skipcol() return "off" instead of "n - off".
- Use 0-based "row" in textpos2screenpos() until W_WINROW is added.
closes: #12832
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Missing test coverage for blockwise Visual highlight with
virtual that starts with a double-width char.
Solution: Add a new virtual text to the test. Some other small fixes.
closes: #12835
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Update po files by running `make` in `src/po/`.
Some po files were out of sync with the files in other encodings.
Related: #12749, #12787closes: #12826closes: #12840
Problem: Wrong curswant when clicking and the second cell of a
double-width char.
Solution: Don't copy virtcol of the first char to the second one.
closes: #12842
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: No type checking in interfaces
Solution: Implement member type check in vim9 interfaces
Most of the code is a small refactoring to allow the use of a where_T
for signaling the type mismatch, the type checking itself is pretty
simple.
Improve where_T error reports
Let the caller explicitly define the kind of location it's referring to
and free the WT_ARGUMENT enum from its catch-all role.
Implement type checking for interface methods
Follows closely the logic used for type-checking the members.
closes: #12844
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: segfault when reading invalid viminfo file
Solution: Check the expected type in the viminfo file
Thanks to @yegappan for the included test.
closes: #12652closes: #12845
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Pierre Colin <48397990+Pierre-Colin@users.noreply.github.com>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: leftover files in libvterm
Solution: Fix cleaning of libvterm directory
Delete the libvterm/src/.libs directory and fix typo in libvterm/t/.libs
directory name.
closes: #12846
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: Duplicate code to reverse a string
Solution: Move reverse_text() to strings.c and remove string_reverse().
closes: #12847
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Calling a base class method through an extended class fails
Solution: Create lookup table for member index in the interface to
to the member class implementing the interface
Create additional tests for Vim9 classes. Fix unconvered memory leaks
and crashes found by the new tests.
closes: #12848closes: #12089
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>author
Problem: Rename completion specific findex var
Solution: Move "findex" static variable to xp_selected in expand_T
closes: #12548
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: :runtime completion fails for multiple args
Solution: Make it work
closes: #12616
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: blockwise Visual highlight not working with virtual text
Solution: Reset the correct variable at the end of virtual selection and
Check for double-width char inside virtual text.
closes: #12606
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Manual pages requested for output may undergo formatting
arranged by some roff-descendant program. Lines longer
than MANWIDTH or COLUMNS or real-estate width of a device
(with support for horizontal scrolling considered) can be
divided at either blank characters and/or at groups of word
characters (syllables) according to supported hyphenation
rules (although page authors are free to disable hyphenation
or prevent particular words from being hyphenated).
Groff‘s manual describes it as follows:
5.1.2 Hyphenation
Since the odds are not great for finding a set of words, for
every output line, which fit nicely on a line without
inserting excessive amounts of space between words, gtroff
hyphenates words so that it can justify lines without
inserting too much space between words. It uses an internal
hyphenation algorithm (a simplified version of the algorithm
used within TeX) to indicate which words can be hyphenated
and how to do so. When a word is hyphenated, the first part
of the word is added to the current filled line being output
(with an attached hyphen), and the other portion is added to
the next line to be filled.
It would be expedient for autoload/dist/man.vim (along with
syntax/man.vim‘s highlighting and ftplugin/man.vim‘s Ctrl-],
\K mappings) to allow for hyphenation of cross-references
to manual pages.
For example,
# Launch Vim [v9.0; patched: 1-1378, 1499] as follows:
MANWIDTH=80 vim --not-a-term +MANPAGER '+Man man' '+/conv(1)' '+norm B'
# Press Ctrl-] with cursor on _m_: "... use man‐
# conv(1) directly."_______________________[^]
#
# (Man v2.11.2)
# Launch Vim as follows:
MANWIDTH=80 vim --not-a-term +MANPAGER '+Man git' '+/config(1)' '+norm B'
# Press Ctrl-] with cursor on _g_: "... in git-
# config(1) for a more ..."_______________[^]
#
# (Git v2.39.2)
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Functions col and cursor count each tab (0x9) as a byte, and
are complementary. On the other hand, the | command motion
takes into consideration how many screen columns a tab does
occupy and may move cursor to a column closer to the start
of line than col would report at that position.
The provided changes prefer the cursor function to the | command.
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: passing multiple patterns to runtime not working
Solution: prepend prefix to each argument separately
closes: #12617
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: screenpos() wrong result with w_skipcol and cpoptions+=n
Solution: Use adjust_plines_for_skipcol() instead of subtracting
w_skipcol.
closes: #12625
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: missing winid argument for virtcol()
Solution: Add a {winid} argument to virtcol()
Other functions col(), charcol() and virtcol2col() support a {winid}
argument, so it makes sense for virtcol() to also support than.
Also add test for virtcol2col() with 'showbreak' and {winid}.
closes: #12633
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: minor problems with the teapot()
Solution: remove the null check, update documentation
Update the builtin-function-list entry. (It implicitly returns 0, but such
functions usually use "none")
Also, tv_get_string_strict() can not return NULL, so remove that check
closes: #12647
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: incorrect heights in win_size_restore()
Solution: avoid restoring incorrect heights in win_size_restore()
Changing 'showtabline' or 'cmdheight' in the cmdwin restores incorrect
window heights after closing the cmdwin.
This may produce a gap between the cmdline and the window above.
Solution: restore window sizes only if the number of lines available for windows
changed; subtract the rows of the tabline, cmdline and last window's statusline
from 'lines' (other statuslines don't matter).
closes: #12704
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: Wrong cursor position when clicking after concealed text
with 'virtualedit'.
Solution: Store virtual columns in ScreenCols[] instead of text
columns, and always use coladvance() when clicking.
This also fixes incorrect curswant when clicking on a TAB, so now
Test_normal_click_on_ctrl_char() asserts the same results as the ones
before patch 9.0.0048.
closes: #12808
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Fix regression in {func} argument of reduce()
Solution: pass function name as string again
Before patch 9.0.0548, passing a string as {func} argument of reduce()
is treated as a function name, but after patch 9.0.0548 it is treated as
an expression instead, which is useless as reduce() doesn't set any v:
variables. This PR restores the behavior of {func} before that patch.
Also correct an emsg() call, as e_string_list_or_blob_required doesn't
contain format specifiers.
closes: #12824
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: wrong error messages when passing wrong types to count()
Solution: fix it
This fixes two problems:
1. When passing wrong type to {ic} argument of count(), two error
messages are given, the second of which is misleading.
2. When passing wrong type to {comp} argument of count(), the error
message doesn't mention that {comp} may be a String.
closes: #12825
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Build failure on Windows with dynamic lua (after 9.0.1719)
Solution: move definition further down in if_lua
closes: #12811closes: #12814closes: #12818
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9 class using wrong index for overridden method
Solution: Use correct index for overridden method
closes: #12524closes: #12813
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: if_lua: crash for Lua functions invoked via Vim callbacks
Solution: Use Lua registry rather than upvalues for udata cache
closes: #12785
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Jesse Pavel <jpavel@alum.mit.edu>
Problem: dict-completion does not respect region
Solution: respect selected region in dict completion
Set do_region to zero as we don't want a complete dump of the matching
words, we want the code to filter them according to the user's selected
region.
closes: #12792closes: #7025
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: virtcol2col returns last byte of a multi-byte char
Solution: Make it return the first byte for a multi-byte char
closes: #12786closes: #12799
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Windows build with python 3.12 and clang fails
Solution: Remove the PyBool_Type function pointer for python 3.12
Clang on Win doesn't like non-static functions in static struct with
Python 3.12 - removing the new obfuscated function and protecting the
old PyBool function for older Pythons fixes the issue.
closes: #12800
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Zdenek Dohnal <zdohnal@redhat.com>
Problem: duplicate test in message_test.c
Solution: Remove duplicate test and make functions static
closes: #12803
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Github CI fails to load snd-dummy kernel module
Solution: Make installation of linux-modules-extra optional
linux-modules-extra package are not available on Ubuntu 22 at the
moment, which breaks CI runs. The change make its installation
conditional as the original `if-else` structure tried to do.
closes: #12801
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Zdenek Dohnal <zdohnal@redhat.com>
Problem: dead code in charset.c
Solution: remove it
linetabsize_col() calls init_chartabsize_arg() with 0 as "lnum", so
cts.cts_has_prop_with_text is always FALSE.
closes: #PR
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: sidescrolloff and scrolloff options work slightly
different than other global-local options
Solution: Make it behave consistent for all global-local options
It was noticed, that sidescrolloff and scrolloff options behave
differently in comparison to other global-local window options like
'listchars'
So make those two behave like other global-local options. Also add some
extra documentation for a few special local-window options.
Add a few tests to make sure all global-local window options behave
similar
closes: #12956closes: #12643
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: dynamic build with python 3.12 breaks
Solution: if_python3.c: Fix building dynamic Python3 interpreter
There are new extern global variables defined in python3 development
files, which types are within python3 library, so they break dynamic
python3 interpret Vim plugin.
Since the variables are used in macro `Py_SIZE` which is used in other
python3 headers, the dummy variables have to defined before including
Python.h.
closes: #12660
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Zdenek Dohnal <zdohnal@redhat.com>
Problem: getcompletion() failes for user-defined commands
Solution: set context for completion function
closes: #12681closes: #12680
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot wrap around in popup_filter_menu()
Solution: Allow to wrap around by default
Currently, it is not possible, to wrap around at the end of the list
using e.g. down (and go back to the top) or up at the beginning of the
list and go directly to the last item. This is not consistent behaviour
with e.g. how the pum-menu currently works, so let's just allow this.
Also adjust tests about it.
closes: #12689closes: #12693
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cursor position wrong when clicking on an unprintable char
Solution: Don't update prev_ptr when wlv.n_extra is not zero.
closes: #12664
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Cannot use positional arguments for printf()
Solution: Support positional arguments in string formatting
closes: #12140
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: Vim9 Calling a method in an extended class fails
Solution: use method index directly
closes: #12778
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
* Dedicate upcoming Vim 9.1 to Bram
Also replace in a few more places Brams email address and mention new
maintainers.
* Remove Bram from any Maintainer role
* runtime: Align Header
* it's mailing list not mailinglist
Problem: Undo test is flaky.
Solution: Apply filter and change time to "1 second ago" in both dumps.
closes: #12771
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: vim9 crash when class member overridden
Solution: Use method_count field instead
closes: #12676closes: #12677
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: compile warning for xdiff/xutils on MS-Windows
Solution: add explicit type cast from size_t to long
closes: #12531
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Mike Williams <mikew@globalgraphics.com>
Problem: incsearch test not sufficient (after 9.0.1691)
Solution: add an additional test
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: wrong mapping applied when replaying a char search
Solution: Store a NOP after the ESC
closes: #12708closes: #6350
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Ctrl-Q not handled like Ctrl-V in replace mode
Solution: Handle Ctrl-Q like Ctrl-V
closes: #12686closes: #12684
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Android not handling AI_V4MAPPED ai_flag
Solution: don't set AI_V4MAPPED flag when on Android, since
Android's getaddrinfo returns EAI_BADFLAGS if ai_flags
contains it
closes: #12613
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: cions <gh.cions@gmail.com>
Problem: wrong viewport restored for incsearch and smoothscroll
Solution: Save and restore skipcol as well
closes: #12713
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: popup_create() not aborting on errors
Solution: check for errors in arguments given and abort if an error
occurred
closes: #12711
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: python 3.12 produces warnings and fails test
Solution: Make use of raw strings in python3 tests
closes: #12765
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Zdenek Dohnal <zdohnal@redhat.com>
Problem: mapset() not properly handling script ID
Solution: replace_termcodes() may accept a script ID
closes: #12699closes: #12697
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: undotree() only works for the current buffer
Solution: Add an optional "buffer number" parameter to undotree(). If
omitted, use the current buffer for backwards compatibility.
closes: #4001closes: #12292
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Co-authored-by: Devin J. Pohly <djpohly@gmail.com>
Problem: Python 3.11 interface throws deprecation warnings
Solution: ignore those warnings for gcc and clang
Python 3.11 deprecation warnings are already silenced for clang using
the pragma
```
# pragma clang diagnostic ignored "-Wdeprecated-declarations"
```
However those warnings are also emitted when using gcc. To avoid them
for both compilers, change use the __GNUC__ ifdef, which is defined for
gcc as well as clang.
Additionally, instead of using the "clang diagnostic ignored" pragma,
let's make use of 'GCC diagnostic ignored' which is again supported by
clang and GCC
closes: #12610
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Philip H <47042125+pheiduck@users.noreply.github.com>
Problem: libvterm slightly outdated
Solution: Update libvterm from rev 818 to rev 839
Notable fix: libvterm now handles DECSM/DECRM with multiple arguents,
so several ncurses programs (e.g. nnn) can enable mouse properly when
run in Vim's terminal in XTerm.
closes: #12746
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Using xxd(1) to filter and edit binary files causes the input files
to have dual nature, so to speak, which effectively makes restoring
the cursor position broken. Fix that by ignoring the "xxd" file type
in the code that restores the cursor position.
Interactive rebasing in git causes files to be edited in vim, which,
similarly to commit messages, are rarely the same as the last one
edited. Thus, also add "gitrebase" to the list of file types for
which the cursor position isn't restored.
While there, refactor the code a bit to possibly save a few CPU cycles
and to keep the line lengths in check, and use the long form of the
commands and variables, to make the code slightly more consistent and
more understandable to newcomers.
Update the relevant comments in the code and the associated parts of
the documentation, to keep them in sync with the updated code.
Remove some redundant trailing whitespace as well, as spotted.
Save and restore the view position before and after saving the buffer,
respectively, to keep the current view of the xxd(1)'s hex dump
unchanged after doing ":w", which previously caused the window to
scroll back to the very beginning of the buffer. I believe it's
needless to say how annoying and counterproductive that was.
Get rid of the "Press ENTER or type command to continue" message, which
was previously displayed after opening larger binary files. The use
of "silent" and "redraw" commands is tailored specifically to avoid
screen flickering, e.g. when doing ":w", which is caused by the buffer
being filtered by an external command.
Increase the number of octets per line, produced by xxd(1), from the
default value of 16 to 32. This puts bigger chunks of the hex dump
on the screen and makes the whole thing much more usable.
While there, reformat the code to make it more readable, and use the
long form of the commands and variables to make the code slightly more
consistent and more understandable to newcomers.
This is a collection of various PRs from github that all require a minor
patch number:
1) https://github.com/vim/vim/pull/12612
Do not conflate dictionary key with end of block
2) https://github.com/vim/vim/pull/12729:
When saving and restoring 'undolevels', the constructs `&undolevels` and
`:set undolevels` are problematic.
The construct `&undolevels` reads an unpredictable value; it will be the
local option value (if one has been set), or the global option value
(otherwise), making it unsuitable for saving a value for later
restoration.
Similarly, if a local option value has been set for 'undolevels',
temporarily modifying the option via `:set undolevels` changes the local
value as well as the global value, requiring extra work to restore both
values.
Saving and restoring the option value in one step via the construct
`:let &undolevels = &undolevels` appears to make no changes to the
'undolevels' option, but if a local option has been set to a different
value than the global option, it has the unintended effect of changing
the global 'undolevels' value to the local value.
Update the documentation to explain these issues and recommend explicit
use of global and local option values when saving and restoring. Update
some unit tests to use `g:undolevels`.
3) https://github.com/vim/vim/pull/12702:
Problem: Pip requirements files are not recognized.
Solution: Add a pattern to match pip requirements files.
4) https://github.com/vim/vim/pull/12688:
Add indent file and tests for ABB Rapid
5) https://github.com/vim/vim/pull/12668:
Use Lua 5.1 numeric escapes in tests and add to CI
Only Lua 5.2+ and LuaJIT understand hexadecimal escapes in strings. Lua
5.1 only supports decimal escapes:
> A character in a string can also be specified by its numerical value
> using the escape sequence \ddd, where ddd is a sequence of up to three
> decimal digits. (Note that if a numerical escape is to be followed by a
> digit, it must be expressed using exactly three digits.) Strings in Lua
> can contain any 8-bit value, including embedded zeros, which can be
> specified as '\0'.
To make sure this works with Lua 5.4 and Lua 5.1 change the Vim CI to
run with Lua 5.1 as well as Lua 5.4
6) https://github.com/vim/vim/pull/12631:
Add hurl filetype detection
7) https://github.com/vim/vim/pull/12573:
Problem: Files for haskell persistent library are not recognized
Solution: Add pattern persistentmodels for haskell persistent library
closes: #12612closes: #12729closes: #12702closes: #12688closes: #12668closes: #12631closes: #12573
Co-authored-by: lacygoill <lacygoill@lacygoill.me>
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Jacob Pfeifer <jacob@pfeifer.dev>
Co-authored-by: Borys Lykah <lykahb@fastmail.com>
Problem: crypt: sodium encryption is not portable
Solution: use little-endian byte order for sodium encrypted files
As mentioned in #12586, sodium encryption only works on little ending
architectures, because reading and writing the sodium encryption
parameters are stored in the encrypted files in an arch-dependent way.
This of course fails for big-endian architectures like s390.
So make sure to use little-endian byte order when reading and writing
sodium encrypted files.
fixes: #12586
closes: 12655
Problem: sodium test fails in Github CI
Solution: Catch sodium_mlock() errors and do not error out
sodium_mlock() seems to fail consistently on the Github CI. Perhaps
[sodium_mlock()](https://libsodium.gitbook.io/doc/memory_management#text-locking-memory)
is called too often or with too much memory by the runners so
that this starts failing.
Let's just try to catch this and skip the test, when this starts
happening.
closes: #12751
https://github.com/voxpupuli/hiera-eyaml/ uses and produces the eyaml
format, which is simply yaml with some encrypted values.
It's convenient to edit the file without decrypting when not touching
encrypted values (or when you don't have access to the decryption key),
which is why vim should treat those files as yaml files.
* feat(heex): borrow matchit support from html
Makes % support behave the same in heex as in html. For example, quickly moving the cursor between opening and closing tags.
* Remove unnecessary line; define b:undo_ftplugin first
* Remove b:html_set_match_words
Problem: Tests may leave leftover files around
Solution: Clean up tests and remove files
There were a few failures in 'linux (huge, gcc, testgui, true, true)'
e.g. here: https://github.com/vim/vim/actions/runs/5497376153/jobs/10018060156
,----
| Error detected while processing command line..script /home/runner/work/vim/vim/src/testdir/runtest.vim[585]..function RunTheTest[54]..Test_lvimgrep_crash[16]..TestTimeout[12]..VimLeavePre Autocommands for "*"..function EarlyExit[7]..FinishTesting:
| line 70:
| E445: Other window contains changes
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txt
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txt
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txtmalloc(): unsorted double linked list corrupted
`----
Which is puzzling, because the Xtest_stable_xxd file should have been
long gone after test_crypt.vim is run (and definitely no longer be
staying around in test_quickfix.vim).
So try to clean up properly after a test script is run, just in case any
X<file> is still around. During testing, a found a few leftover files,
which I also fixed in the relevant test-file.
Unfortunately, the test workflow 'linux (huge, gcc, testgui, true,
true)' now seems to fail with 'E1230: Encryption: sodium_mlock()' in
test_crypt.vim. Hopefully this is only temporary.
Problem: Crash syncing swapfile in new buffer when using sodium crypt.
(James McCoy)
Solution: Add checks for sodium encryption. (Christian Brabandt,
closes#12591, closes#12585)
Problem: Empty CmdlineEnter autocommand causes errors in Ex mode.
Solution: Save and restore ex_pressedreturn. (Christian Brabandt,
closes # 12581, closes#12578)
Problem: Termdebug on MS-Windows: some file names are not recognized.
Solution: Do not always change \t and \n. (Christian Brabandt,
closes#12565, closes#12560, closes#12550)
Problem: Error for using matchfuzzy() in Vim9 script returning a list of
dicts.
Solution: Make return type of matchfuzzy() list<any>. (Yegappan Lakshmanan,
closes#12574)
Problem: Autoload files for "zig" are not installed.
Solution: Add install and uninstall rules in the makefile. (Christian
Brabandt, closes#12577, closes#12567)
Problem: Syntax test fails when detected shell type differs.
Solution: Avoid using "/bin/sh", it depends on the system. Add a check that
the shell type detection is correct.
Problem: Insufficient testing for syntax plugins.
Solution: Add shell file examples. (Charles Campbell) Create a messages
file for easier debugging and reporting the test results.
Problem: Compiler warning for uninitialized variable.
Solution: Move the variable to an inner block and initialize it. (Christian
Brabandt, closes#12549)
Problem: "make clean" at the toplevel fails.
Solution: Clean the indent and syntax directories in a sub-shell. (Ben
Jackson, closes#12536, closes#12526)
Problem: Visual area not shown when using 'showbreak' and start of line is
not visible. (Jaehwang Jung)
Solution: Adjust "fromcol" for the space taken by 'showbreak'.
(closes#12514)
Problem: FILETYPE_FILE is defined to the same value multiple times. Same
for a few similar macros.
Solution: Define FILETYPE_FILE and others in feature.h only
Problem: The focus gained/lost escape sequences cause trouble for a
terminal where Vim does not expect them.
Solution: Always recognize the codes for focus gained/lost. (closes#12499)
Problem: charidx() and utf16idx() result is not consistent with byteidx().
Solution: When the index is equal to the length of the text return the
lenght of the text instead of -1. (Yegappan Lakshmanan,
closes#12503)
Problem: Display is wrong when 'smoothscroll' is set and scrolling multiple
lines.
Solution: Redraw with UPD_NOT_VALID when "skipcol" is or was set.
(closes#12490, closes#12468)
Problem: screenpos() returns wrong row with diff filler lines.
Solution: Only add filler lines when appropriate. Also don't add the
'smoothscroll' marker when w_skipcol is zero. (closes#12485,
closes#12484)
Problem: Crash when calling method on super in child constructor. (Israel
Chauca Fuentes)
Solution: Clear the type list. (Ernie Rael, closes#12489, closes#12471)
Problem: Errors from the codestyle test are a bit confusing.
Solution: Use assert_report() with a clearer message. Avoid a warning for
an existing swap file.
Problem: Stray character is visible if 'smoothscroll' marker is displayed
on top of a double-wide character.
Solution: When overwriting a double-width character with the 'smoothscroll'
marker clear the second half. (closes#12469)
Problem: Filetype detection fails for *.conf file without comments.
(Dmitrii Tcyganok)
Solution: Use "conf" filetype as a fallback for an empty .conf file.
(closes#12487, closes#12483)
Problem: Cursor not adjusted when near top or bottom of window and
'splitkeep' is not "cursor".
Solution: Move boundary checks to outer cursor move functions, inner
functions should only return valid cursor positions. (Luuk van
Baal, closes#12480)
Problem: screenchar(), screenchars() and screenstring() do not work
properly when 'encoding' is set to a double-byte encoding.
Solution: Fix the way the bytes of the characters are obtained.
(issue #12469)
Problem: Some "gomod" files are not recognized.
Solution: Check for "go.mod" file name before checking out the contents.
(Omar El Halabi, closes#12462)
Problem: Incsearch not triggered when pasting clipboard register on the
command line.
Solution: Also set "literally" when using a clipboard register. (Ken Takata,
closes#12460)
Problem: Checking translations gives an error for using two messages with
ngettext() that differ in "%" items.
Solution: Adjust the check script to tolerate omitting one "%" item.
Problem: Weird use of static variables for spell checking.
Solution: Move the variables to a structure and pass them from win_update()
to win_line(). (Luuk van Baal, closes#12448)
Problem: Get E304 when using 'cryptmethod' "xchacha20v2". (Steve Mynott)
Solution: Add 4th crypt method to block zero ID check. Avoid syncing a swap
file before reading the file. (closes#12433)
Problem: :stopinsert may not work in a popup close handler. (Ben Jackson)
Solution: Restore stop_insert_mode when appropriate. (closes#12452,
closes#12434)
Problem: SpellCap highlight not always updated when needed.
Solution: Handle updating line below closed fold and other situations where
only part of the window is redrawn. (Luuk van Baal, closes#12428,
closes#12420)
Problem: MS-Windows: context menu translations may be wrong.
Solution: Set the encoding before using gettext(). (Ken Takata,
closes#12441, closes#12431)
Problem: RedrawingDisabled not used consistently.
Solution: Avoid RedrawingDisabled going negative. Set RedrawingDisabled in
win_split_ins(). (closes#11961)
Problem: Cannot use "this.member" in lambda in class method.
Solution: Adjust check for reserved keyword. (Hirohito Higashi,
closes#12416, closes#12076, closes#12336)
Problem: With 'smoothscroll' cursor may move below botline.
Solution: Call redraw_later() if needed, Compute cursor row with adjusted
condition. (Luuk van Baal, closes#12415)
Problem: Display moves up and down with 'incsearch' and 'smoothscroll'.
Solution: Do not check if w_skipcol changed. (Luuk van Baal, closes#12410,
closes#12409)
Problem: GTK3: window manager resize hints are incomplete.
Solution: Use NULL for second argument of gtk_window_set_geometry_hints().
(Kenny Stauffer closes#11055)
Problem: Display wrong when moving cursor to above the top line and
'smoothscroll' is set.
Solution: Call adjust_skipcol() in more places and make it work better.
(Luuk van Baal, closes#12395)
Problem: Win32: When 'encoding' is set $PATH has duplicate entries.
Solution: Only append the directory if it is not there yet. (Ken Takata,
closes#12400, closes#12372)
Problem: Function argument types not always checked and using v:none may
cause an error.
Solution: Check argument types once the function type is known. Do not give
an error for using v:none as an argument. (closes#12200)
Problem: Position of marker for 'smoothscroll' not computed correctly.
Solution: Take 'list' and other options into account. (Luuk van Baal,
closes#12393)
Problem: CI: check in sound-dummy module may throw an error.
Solution: Check whether apt-cache can show the package description.
(Christian Brabandt, closes#12390)
Problem: Some commands for opening a file don't use 'switchbuf'.
Solution: Use 'switchbuf' for more commands. (Yegappan Lakshmanan,
closes#12383, closes#12381)
Problem: Display errors when making topline shorter and 'smoothscroll' is
set.
Solution: Reset w_skipcol when the topline becomes shorter than its current
value. (Luuk van Baal, closes#12367)
Problem: Message for opening the cmdline window is not translated.
Solution: Add gettext() and scan the defaults script for text to be
translated. (closes#12371)
Problem: Cursor moves to wrong line when 'foldmethod' is "diff". (Rick
Howe)
Solution: Adjust logic for scrolling. (Luuk van Baal, closes#12364,
closes#12218)
Problem: Libsodium encryption is only used with "huge" features, even when
manually enabled through configure. (Tony Mechelynck)
Solution: Remove the condition on FEAT_HUGE.
Problem: 'smoothscroll' does not always work properly.
Solution: Do not reset w_skipcol after it was intentionally set. (Luuk van
Baal, closes#12360, closes#12199, closes#12323)
Problem: Search stats not always visible when searching backwards.
Solution: Do not display the top/bot message on top of the search stats.
(Christian Brabandt, closes#12322, closes#12222)
Problem: Assert message is confusing with boolean result. assert_inrange()
replaces message instead of adding it.
Solution: Don't put quotes around expected boolean value. Append message
for assert_inrange(). (closes#12342, closes#12341)
Problem: No error when calling remote_startserver() with an empty string.
Solution: Give an error for an empty string. (Hirohito Higashi,
closes#12327)
Problem: In a terminal window the cursor may jump around. (Kenny Stauffer)
Solution: Do not move the cursor to the position for terminal-normal mode.
(closes#12312)
Problem: Popup menu position wrong in window with toolbar.
Solution: Take the window toolbar into account when positioning the popup
menu. (closes#12308)
Problem: Content-type header for LSP channel not according to spec.
Solution: Use "vscode-jsonrpc" instead of "vim-jsonrpc". (Yegappan
Lakshmanan, closes#12295)
Problem: no functions for converting from/to UTF-16 index.
Solution: Add UTF-16 flag to existing funtions and add strutf16len() and
utf16idx(). (Yegappan Lakshmanan, closes#12216)
Problem: Decrypting with libsodium may fail if the library changes.
Solution: Add parameters used to the encrypted file header. (Christian
Brabandt, closes#12279)
Problem: Using popup menu may leave text in the command line.
Solution: Clear the command line if the popup menu covered it. (Luuk van
Baal, closes#12286)
Problem: Lines put in non-current window are not displayed. (Marius
Gedminas)
Solution: Don't increment the topline when inserting just above it.
(closes#12212)
Problem: Deferred functions invoked in unexpected order when using :qa and
autocommands.
Solution: Call deferred functions for the current funccal before using the
stack. (closes#12278)
Problem: Recursively calling :defer function if it does :qa in a compiled
function.
Solution: Clear the defer entry before calling the function. (closes#12271)
Problem: Cannot use an object member name as a method argument.
Solution: Do not give an error for using an object member name for a method
argument. (Hirohito Higashi, closes#12241, closes#12225)
Fix line number for other argument error.
Problem: Virtual text truncation only works with Unicode 'encoding'.
Solution: Convert the ellipsis character to 'encoding' if needed. (Hirohito
Higashi, closes#12233)
Problem: Ruler not drawn correctly when using 'rulerformat'.
Solution: Adjust formatting depending on whether the ruler is drawn in the
statusline or the command line. (Sean Dewar, closes#12246)
Problem: Crash when passing NULL to setcmdline(). (Andreas Louv)
Solution: Use tv_get_string() instead of using v_string directly.
(closes#12231, closes#12227)
Problem: .fs files are falsely recognized as forth files.
Solution: Check 100 lines for something that looks like forth. (Johan
Kotlinski, closes#12219, closes#11988)
Problem: Scrolling too many lines when 'wrap' and 'diff' are set.
Solution: Only scroll by screenlines for 'diff' when 'wrap' is not set.
(closes#12211)
Problem: Cursor in wrong position when leaving insert mode.
Solution: Update the w_valid flags. Position the cursor also when not
redrawing. (closes#12137)
Problem: Indent wrong after "export namespace" in C++.
Solution: Skip over "inline" and "export" in any order. (Virginia Senioria,
closes#12134, closes#12133)
Problem: Highlight for popupmenu kind and extra cannot be set.
Solution: Add PmenuKind, PmenuKindSel, PmenuExtra and PmenuExtraSel
highlight groups and use them. (Gianmaria Bajo, closes#12114)
Problem: "clear" macros are not always used.
Solution: Use ALLOC_ONE, VIM_CLEAR, CLEAR_POINTER and CLEAR_FIELD in more
places. (Yegappan Lakshmanan, closes#12104)
Problem: FOR_ALL_ macros are defined in an unexpected file.
Solution: Move FOR_ALL_ macros to macros.h. Add FOR_ALL_HASHTAB_ITEMS.
(Yegappan Lakshmanan, closes#12109)
Problem: Function for setting options not used consistently.
Solution: Use a function for 'encoding' and terminal options. (Yegappan
Lakshmanan, closes#12099)
Problem: Wrong text displayed when using both 'linebreak' and 'list'.
Solution: Only set "c_extra" to NUL when "p_extra" is not empty. (Hirohito
Higashi, closes#12065)
Problem: Still some "else if" constructs for setting options.
Solution: Add a few more functions for handling options. (Yegappan
Lakshmanan, closes#12090)
Problem: Too many "else if" statements in handling options.
Solution: Add more functions for handling option changes. (Yegappan
Lakshmanan, closes#12060)
Problem: Too many "else if" statements to handle option values.
Solution: Add more functions to handle option value changes. (Yegappan
Lakshmanan, closes#12058)
Problem: No test for bad use of spaces in help files.
Solution: Add checks for use of spaces in help files. Ignore intentional
spaces. (Hirohito Higashi, closes#11952)
Problem: Crash when using buffer-local user command in cmdline window.
(Karl Yngve Lervåg)
Solution: Use the right buffer to find the user command. (closes#12030,
closes#12029)
Problem: Cursor in wrong position below line with virtual text below ending
in multi-byte character.
Solution: When checking for last character take care of multi-byte
character.
Problem: "gj" and "gk" do not move correctly over a closed fold.
Solution: Use the same code as used for "j"/"k" to go to the next/previous
line. (Luuk van Baal, closes#12007)
Problem: Crash when indexing "any" which is an object.
Solution: Check the index is a number. Do not check the member type of an
object. (closes#12019)
Problem: Checking the type of a null object causes a crash.
Solution: Don't try to get the class of a null object. (closes#12005)
Handle error from calling a user function better.
Problem: MS-Windows: vimfiles dir created with admin group.
Solution: Use ShellExecAsUser to create the vimfiles directory. (Christopher
Plewright, Ken Takata, closes#12000, closes#11888)
Problem: :messages behavior depends on 'fileformat' of current buffer.
Solution: Pass the buffer pointer to where it is used. (Mirko Ceroni,
closes#11995)
Problem: "$" for 'list' option displayed in wrong position when there are
text properties.
Solution: Adjust logic for order of displayed items. (closes#11959)
Problem: 'statusline' only supports one "%=" item.
Solution: Add support for multiple "%=" items. (TJ DeVries, Yegappan
Lakshmanan, closes#11970, closes#11965)
Problem: Inserting a register on the command line does not trigger
incsearch or update hlsearch.
Solution: Have cmdline_insert_reg() return CMDLINE_CHANGED when appropriate
and handle it correctly. (Ken Takata, closes#11960)
Problem: Calling an object method with arguments does not work. (Ernie
Rael)
Solution: Take the argument count into account when looking up the object.
(closes#11911)
Problem: :defer may call the wrong method for an object. (Ernie Rael)
Solution: When en object is from a class that extends or implements, figure
out the method to call at runtime. (closes#11910)
Problem: .clangd and .stylelintrc files don't get a filetype.
Solution: Use yaml for .clangd and json for .stylelintrc files. (Mark
Skelton, closes#11916)
Problem: The did_set_string_option function is too long.
Solution: Further cleanup of handling string options. (Yegappan Lakshmanan,
Lewis Russell, closes#11920)
Problem: The did_set_string_option function is too long.
Solution: Split off functionality to individual functions. (Yegappan
Lakshmanan, Lewis Russell, closes#11904)
Problem: MS-Windows: scrollback cropped off on Vim exit.
Solution: Don't call SetConsoleScreenBufferInfoEx when using the alternate
screen buffer. (Christopher Plewright, closes#11882)
Problem: Cursor briefly displayed in a wrong position when pressing Esc in
Insert mode after autoindent was used.
Solution: Do not adjust the cursor position for assumed deleted white space
if text is following. (closes#11877)
Problem: Cannot access a private object member in a lambda defined inside
the class.
Solution: Go up the context stack to find the class. (closes#11866)
Problem: :runtime completion can be further improved.
Solution: Also complete the {where} argument values and adjust the
completion for that. (closes#11874)
Problem: Spurious empty line when using text propertie and virtual text.
Solution: Do not set "text_prop_follows" when the other text property is not
virtual text. (closes#11846)
Problem: Termcap/terminfo entries do not indicate where modifiers might
appear.
Solution: Add ";*" for function keys where modifiers are likely to be used.
Problem: Using isalpha() adds dependency on current locale.
Solution: Do not use isalpha() for recognizing a URL or the end of an Ex
command. (closes#11835)
Problem: Adding a line below the last one does not expand fold.
Solution: Do not skip mark_adjust() when adding lines below the last one.
(Brandon Simmons, closes#11832, closes#10698)
Problem: Testing with Python on AppVeyor does not work properly.
Solution: Fix typo. Move most lines to the .bat file. (Christopher
Plewright, closes#11828)
Problem: Crash when handling class that extends another class with more
than one object members.
Solution: Correct pointer computations. (closes#11824)
Problem: Screen is not redrawn after using setcellwidths().
Solution: Redraw the screen when the cell widths have changed. (Yasuhiro
Matsumoto, closes#11800)
Problem: Some key+modifier tests fail on some AppVeyor images.
Solution: Adjust the tests for key movements and fix the revealed bugs.
(Christopher Plewright, closes#11798)
Problem: Evaluating string expression advances function line.
Solution: Disable function lines while parsing a string expression.
(Hirohito Higashi, closes#11796)
Problem: Configure does not handle all FORTIFY_SOURCE variants.
Solution: Also handle Fedora's default FORTIFY_SOURCE flags. (Zdenek Dohnal,
closes#11794)
Problem: Class "implements" argument not implemented.
Solution: Implement "implements" argument. Add basic checks for when a
class implements an interface.
Problem: MS-Windows: various special keys and modifiers are not mappable.
Solution: Adjust the handling of keys with modifiers. (Christian Plewright,
closes#11768)
Problem: Crash and/or memory leak when redefining function after error.
Solution: Clear pointer after making a copy. Clear arrays on failure.
(closes#11774)
Problem: 'cursorcolumn' and 'colorcolumn' wrong after concealing and
wrapping line.
Solution: Reset "wlv.vcol_off" after each screen line. (Alexey Radkov,
closes#11777)
Problem: Unexpected output when autoloading a script for an interactive
operation.
Solution: Reset "KeyTyped" while loading a script and when handling a nested
function. (closes#11773)
Problem: Virtual text at a column position is truncated at the window edge.
(Yegappan Lakshmanan)
Solution: Do not truncated virtual text that is placed at a column.
Problem: Cursor positioning and display problems with 'smoothscroll' and
using "zt", "zb" or "zz".
Solution: Adjust computations and conditions. (Yee Cheng Chin,
closes#11764)
Problem: Terminfo entries for bracketed paste are not used.
Solution: Use the newly added terminfo entries for bracketed paste.
Correct mixup of output strings and key codes.
Problem: A hashtab with many removed items is not cleaned up.
Solution: Re-hash a hashtab even when the size didn't change if too many
items were removed.
Problem: Search error message doesn't show used pattern.
Solution: Pass the actually used pattern to where the error message is
given. (Rob Pilling, closes#11742)
Problem: Assignment to non-existing member causes a crash. (Yegappan
Lakshmanan)
Solution: Give an error message and bail out when a member cannot be found.
Problem: Display wrong in Windows terminal after exiting Vim.
Solution: Apply screen restore fix for Windows 11 also to Windows 10 builds.
(Christopher Plewright, closes#11713, closes#11706)
Problem: Code handling low level MS-Windows events cannot be tested.
Solution: Add test_mswin_event() and tests using it. (Christopher Plewright,
closes#11622)
Problem: The "kitty" terminfo entry is not widespread, resulting in the
kitty terminal not working properly.
Solution: Go back to using "xterm-kitty" and avoid the problems it causes in
another way.
Problem: Can add text property with negative ID before virtual text
property.
Solution: Remember that a text property with a negative ID was used and give
an appropriate error message. (closes#11725)
Fix index computation.
Problem: Using "xterm-kitty" for 'term' causes problems.
Solution: Remove the "xterm-" part when 'term' is set from $TERM. Detect a
few kitty-specific properties based on the version response
instead of the terminal name.
Problem: No information about whether requesting term codes has an effect.
Solution: Add ch_log() calls to report the effect of term code responses.
Avoid deleting an entry and then adding back the same one.
Problem: A shell command switching screens may still have a problem with
the kitty keyboard protocol.
Solution: Disable the kitty keyboard protocol both in the current and the
alternate screen, if there are indications it might be needed.
(issue #11705) Also fix naming.
Problem: Code for making 'shortmess' temporarily empty is repeated.
Solution: Add functions for making 'shortmess' empty and restoring it.
(Christian Brabandt, closes#11709)
Problem: When using Kitty a shell command may mess up the key protocol
state.
Solution: Output t_te before t_TE. If t_te switches between the main and
the alternate screen then deactivating the key protocol by t_TE
should happen after switching screen. (issue #11705)
Problem: Some test function names do not match what they are doing.
Solution: Leave out user data for the test that is called "NoUserData".
(closes#11703)
Problem: Build failure with some compilers that can't handle a
declaration directly after a "case" statement.
Solution: Add a block to put the declarations in.
Problem: Conflict between supercollider and scala filetype detection.
Solution: Do not check for "Class : Method", it can appear in both
filetypes. (Chris Kipp, closes#11699)
Problem: Object member can't get type from initializer.
Solution: If there is no type specified try to use the type of the
initializer. Check for a valid type.
Problem: With "screenline" in 'culopt' cursorline highlight is wrong.
Solution: Apply the priority logic also when "screenline is in 'culopt'.
(closes#11696)
Problem: Using a <Cmd> mapping CmdlineChanged may be triggered twice.
Solution: Count the number of times CmdlineChanged is triggered and avoid
doing it twice. (closes#116820
Problem: lalloc(0) error for a class without members.
Solution: Don't allocate room for members if there aren't any.
Don't create the class if there was an error.
Problem: Mouse shape test is flaky, especially on Mac OS.
Solution: Instead of starting all timers at the same time, start the next
one in the callback of the previous one. (Yee Cheng Chin,
closes#11673) Also use "bwipe!" instead of "close!" to avoid
swap files remaining.
Problem: 'smoothscroll' and virtual text above don't work together.
(Yee Cheng Chin)
Solution: Skip virtual text above when w_skipcol is non-zero.
(closes#11665)
Problem: There is no way to get a list of swap file names.
Solution: Add the swapfilelist() function. Use it in the test script to
clean up. Remove deleting individual swap files.
Problem: Classes are not documented or implemented yet.
Solution: Make the first steps at documenting Vim9 objects, classes and
interfaces. Make initial choices for the syntax. Add a skeleton
implementation. Add "public" and "this" in the command table.
Problem: If 'keyprotocol' is empty "xterm" still uses modifyOtherKeys.
Solution: Remove t_TI, t_RK and t_TE from the "xterm" builtin termcap and
let the default value of 'keyprotocol' add those.
Problem: Display errors when adding or removing text property type.
Solution: Perform a full redraw. Only use text properties for which the
type is defined. (closes#11655)
Problem: Crash when reading help index with various options set. (Marius
Gedminas)
Solution: Do not set wlv.c_extra to NUL when wlv.p_extra is NULL.
(closes#11651)
Problem: Callback name argument is changed by setqflist().
Solution: Use the expanded function name for the callback, do not store it
in the argument. (closes#11653)
Problem: When using kitty keyboard protocol function keys may not work.
(Kovid Goyal)
Solution: Recognize CSI ending in [ABCDEFHPQRS] also when the termcap
entries are not specified. (closes#11648)
Problem: The keyboard state response may end up in a shell command.
Solution: Only request the keyboard protocol state when the typeahead is
empty, no more commands are following and not exiting. Add the
t_RK termcap entry for this.
Problem: It is not easy to see what client-server commands are doing.
Solution: Add channel log messages if ch_log() is available. Move the
channel logging and make it available with the +eval feature.
Problem: Kitty keyboard protocol key not decoded when it has an unsupported
modifier, such as NumLock.
Solution: Accept a key with any modifier. (closes#11638)
Problem: Matchparen highlight is not updated when switching buffers.
Solution: Listen to the BufLeave and the BufWinEnter autocmd events.
(closes#11626)
Problem: Status line of other window not redrawn when dragging it when
'splitkeep' is set to "screen".
Solution: Set w_redr_status earlier. (Luuk van Baal, closes#11635,
closes#11632)
Problem: Error when using the "Tools / Spelling / Find More Languages"
menu.
Solution: Remove "<SID>". Reset "g:menutrans_set_lang_to" when 'encoding'
changes. (closes#11625)
Problem: Cannot detect whether modifyOtherKeys is enabled.
Solution: Use XTQMODKEYS introduced by xterm version 377 to request the
modifyOtherKeys level. Update the keycode check results.
Problem: Pretending to go out of Insert mode when Esc is received has side
effects.
Solution: When the kitty keyboard protocol is enabled expect Esc to always
be the start of an escape sequence.
Problem: Crash when typing a letter in a terminal window. (Shane-XB-Qian)
Solution: Use the "vterm" variable instead of getting the terminal pointer
from the current buffer. (closes#11608)
Problem: Still using simplified mappings when using the kitty keyboard
protocol.
Solution: Use the kitty_protocol_state value to decide whether to use
simplified mappings. Improve how seenModifyOtherKeys is set and
reset.
Problem: MS-Windows: mouse column limited to 223.
Solution: Use two bytes for each mouse coordinate. Add the mouse position
to scroll events. (Christopher Plewright, closes#11597)
Problem: Cannot debug the Kitty keyboard protocol with TermDebug.
Solution: Add Kitty keyboard protocol support to the libvterm fork.
Recognize the escape sequences that the protocol generates. Add
the 'keyprotocol' option to allow the user to specify for which
terminal what protocol is to be used, instead of hard-coding this.
Add recognizing the kitty keyboard protocol status.
Problem: Two conditions are always false.
Solution: Remove the conditions. Update return value types to make clear
what could be returned. (closes#11593)
Problem: Second SIGWINCH signal may be ignored.
Solution: When set_shellsize() is busy when called then run the inner code
again when it's done. (issue #424)
Problem: MS-Windows: modifier keys do not work with mouse scroll events.
Solution: Use K_SPECIAL instead of CSI for the modifier keys. (Christopher
Plewright, closes#11587)
Problem: Only a change in the current window triggers the WinScrolled
event.
Solution: Trigger WinScrolled if any window scrolled or changed size.
(issue #11576)
Problem: libvterm with modifyOtherKeys level 2 does not match xterm.
Solution: Adjust key code escape sequences to be the same as what xterm
sends in modifyOtherKeys level 2 mode. Check the value of
no_reduce_keys before using it.
Problem: With 'smoothscroll' cursor is one screen line too far down. (Ernie
Rael)
Solution: Add a test that currently has the wrong result so that a fix can
be made. (issue #11436)
Problem: Test for home key fails when 'term' is "tmux".
Solution: Only save termcap entries that exist. Adjust code for xHome to
what xterm uses. (closes#11566)
Problem: Virtual text property highlight ignores window background.
Solution: Combine text prop attribute with win_attr into extra_attr.
(closes#11462)
Problem: May redraw when not needed, causing slow scrolling.
Solution: Do not redraw when w_skipcol doesn't change. When w_skipcol
changes only redraw from the top. (issue #11559)
Problem: Keycode check script has a few flaws.
Solution: Sort on terminal name. Ignore XTGETTCAP responses. Check for
version and status response. Update entries.
Problem: MS-Windows GUI: CTRL-] does not work on Swiss keyboard.
Solution: Check the key code and don't consider it as a dead key. (Aedin
Louis Xavier, closes#11556)
Problem: Cannot easily try out what codes various keys produce.
Solution: Add a script to gather key code information, with an initial list
of codes to compare with.
Problem: Horizontal mouse scroll only works in the GUI.
Solution: Make horizontal mouse scroll also work in a terminal.
(Christopher Plewright, closes#11448)
Problem: A silent mapping may cause dots on the command line.
Solution: Don't show dots for completion if they are not going to be removed
again. (closes#11501)
Problem: Get E967 when using text property in quickfix window. (Sergey
Vlasov)
Solution: Do not add an extra NUL and compute the text length correctly.
(closes#11513)
Problem: MS-Windows: after Vim exits console resizing does not work
properly.
Solution: Restore screen behavior checks for various WT and VTP
combinations. (Christopher Plewright, closes#11526,
closes#11507)
Problem: Duplicate arguments are not always detected.
Solution: Expand to full path before comparing arguments. (Nir Lichtman,
closes#11505, closes#9402)
Problem: col() and charcol() only work for the current window.
Solution: Add an optional winid argument. (Yegappan Lakshmanan,
closes#11466, closes#11461)
Problem: Solution for "!!sort" in closed fold is not optimal.
Solution: Use a different range instead of the subtle difference in handling
a range with an offset. (issue #11487)
Problem: MS-Windows Terminal has unstable color control.
Solution: Do not try to read the old command prompt colortable, use modern
VT sequences. (Christopher Plewright, closes#11450,
closes#11373)
Problem: Shell command with just space gives strange error.
Solution: Skip white space at start of the argument. (Christian Brabandt,
Shane-XB-Qian, closes#11515, closes#11495)
Problem: Handling 'statusline' errors is spread out.
Solution: Pass the option name to the lower levels so the option can be
reset there when an error is encountered. (Luuk van Baal,
closes#11467)
Problem: The window title is not redrawn when 'endoffile' changes.
Solution: redraw the window title when 'endoffile' is changed. (Ken Takata,
closes#11488)
Problem: The <Home> key in tmux doesn't work when 'term' is set to "xterm".
(Dominique Pellé)
Solution: Only use '@' in a termcap key entry for "1" when ";" follows.
(closes#11429)
Problem: If 'endofline' is set the CTRL-Z may be written in the wrong
place.
Solution: Write CTRL-Z at the end of the file. Update the help to explain
the possibilities better. (Ken Takata, closes#11486)
Problem: Mouse drag test fails.
Solution: Only reset the mouse click flag when actually switching to another
tab page. Disable test that keeps failing.
Problem: Kitty terminal is not recognized.
Solution: Recognize Kitty by the termresponse and then do not set
seenModifyOtherKeys, since Kitty doesn't support that.
(issue #11413)
Problem: With 'smoothscroll' typing "0" may not go to the first column.
Solution: Recompute w_cline_height when needed. Do not scroll up when it
would move the cursor.
Problem: 'langmap' works differently when there are modifiers.
Solution: Only apply 'langmap' to a character where modifiers have no
effect. (closes#11395, closes#11404)
Problem: The modifyOtherKeys flag is set when it should not.
Solution: Do not handle special key codes with a modifer value above 16 as a
modifyOtherKeys value. (issue #11403)
Problem: MS-Windows: mouse scroll events only work with the dll.
Solution: Accept CSI codes for MS-Windows without the GUI. (Christopher
Plewright, closes#11401)
Problem: At the hit-Enter prompt the End and Home keys may not work.
Solution: Use the special "@" code for End and Home, like it was done for
the cursor keys in patch 8.2.2246. (Trygve Aaberge, closes#11396)
Problem: ModeChanged autocmd not executed when Visual mode is ended with
CTRL-C.
Solution: Do not trigger the autocmd when got_int is set. (closes#11394)
Problem: MS-Windows: mouse scrolling in terminal misbehaves without dll.
Solution: Add #ifdef as a temporary solution. (Christopher Plewright,
closes#11392)
Problem: Text prop "above" not displayed correctly with 'number' and "n" in
'cpo'.
Solution: Draw the line number column until the line text is reached.
Problem: ":!" doesn't do anything but does update the previous command.
Solution: Do not have ":!" change the previous command. (Martin Tournoij,
closes#11372)
Problem: MS-Windows: mouse scrolling not supported in the console.
Solution: Add event handling for mouse scroll events. (Christopher
Plewright, closes#11374)
Problem: Some Ex commands are not in the help index.
Solution: Add the missing commands. Add a script to check all Ex commands
are in the help index. (Yee Cheng Chin, closes#11371)
Problem: Breakindent test cases are commented out.
Solution: Adjust expected result to slightly different behavior. Correct
computations for cursor position.
Problem: Wrong cursor position when using "gj" and "gk" in a long line.
Solution: Adjust computations for the cursor position and skipcol. Re-enable
tests that pass now, disable failing breakindent test.
Problem: Mouse column not correctly used for popup_setpos.
Solution: Adjust off-by-one error and handle Visual line selection properly.
(Yee Cheng Chin, closes#11356)
Problem: Lisp word only recognized when a space follows.
Solution: Also match a word at the end of a line. Rename the test. Use a
compiled function to avoid backslashes.
Problem: Quickfix listing does not handle very long messages.
Solution: Use a growarray instead of a fixed size buffer. (Yegappan
Lakshmanan, closes#11357)
Problem: Cursor position invalid when scrolling with 'smoothscroll' set.
(Ernie Rael)
Solution: Add w_valid_skipcol and clear flags when it changes. Adjust
w_skipcol after moving the cursor.
Problem: Use of strftime() is not safe.
Solution: Check the return value of strftime(). Use a larger buffer and
correctly pass the available space. (Dominique Pellé, closes
#11348)
Problem: Looping over list of lists and changing the list contents works in
Vim9 script, not in a compiled function.
Solution: Mark the loop variable final instead of const. (closes#11347)
Problem: Virtual text "after" wraps to next line even when 'wrap' is off
and 'list' is set.
Solution: Do not use the minimum width when 'wrap' is off. (issue #11336)
Problem: Closure in compiled function gets same variable in block.
Solution: At the end of a block to not always reset the variable count.
(issue #11094)
Problem: Extra empty line between two virtual text "below" when 'wrap' and
'number' are set.
Solution: Reset "before" when there is no text in the screen line.
(closes#11334)
Problem: With 'nowrap' virtual text "after" does not scroll left.
Solution: Skip part of the virtual text that is left of the window.
(closes#11320) Fix going beyond the last column of the window.
Problem: Wrong argument for append() gives two error messages.
Solution: When getting an error for a number argument don't try using it as
a string. (closes#11335)
Problem: With 'nowrap' two virtual text below not displayed correctly.
Solution: Set text_prop_follows before continuing. Correct for number
column. (closes#11333)
Problem: Wrong column when calling setcursorcharpos() with zero lnum.
Solution: Set the line number before calling buf_charidx_to_byteidx().
(closes#11329)
Problem: Quitting/unloading/hiding a terminal buffer does not always work
properly.
Solution: Avoid that ":q!" leaves an empty buffer behind. ":bunload!" also
kills the job and unloads the buffer. ":hide" does not unload the
buffer. (Yee Cheng Chin, closes#11323)
Problem: :confirm does not work properly for a terminal buffer.
Solution: Handle :confirm for a terminal buffer differently. (Yee Cheng
Chin, closes#11312)
Problem: With 'smoothscroll' and 'scrolloff' non-zero the cursor position
is not properly adjusted in a long line.
Solution: Move the cursor further up or down in the line.
Problem: There is no real need for a "big" build.
Solution: Move common features to "normal" build, less often used features
to the "huge" build. (Martin Tournoij, closes#11283)
Problem: Cursor in wrong position with Visual substitute.
Solution: When restoring 'linebreak' mark the virtual column as invalid.
(closes#11309, closes#11311)
Problem: "export def" does not work in a nested block.
Solution: Do not handle "export" with a separate function but in the same
command stack. (closes#11304)
Problem: The right ALT key does not work on some MS-Windows keyboards.
Solution: Adjust the modifiers based on GetKeyState(). (Anoton Sharonov,
closes#11300)
Problem: Cursor line only partly shows with 'smoothscroll' and 'scrolloff'
zero.
Solution: Do not use 'smoothscroll' when adjusting the bottom of the window.
(closes#11269)
Problem: ml_get error when 'splitkeep' is "screen". (Marius Gedminas)
Solution: Check the botline is not too large. (Luuk van Baal,
closes#11293, closes#11292)
Problem: Spacing-combining characters handled as composing, causing text to
take more space than expected.
Solution: Handle characters marked with "Mc" not as composing.
(closes#11282
Problem: Setting 'cmdheight' has no effect if last window was resized.
Solution: Do apply 'cmdheight' when told to. Use the frame height instead
of the cmdline_row. (closes#11286)
Problem: Multi-byte "lastline" item in 'fillchars' does not work properly
when the window is two columns wide.
Solution: Compute the text length correctly. (closes#11280)
Problem: Too many #ifdefs.
Solution: Graduate the +cmdwin feature. Now the tiny and small builds are
equal, drop the small build. (Martin Tournoij, closes#11268)
Problem: Cannot specify another character to use instead of '@' at the end
of the window.
Solution: Add "lastline" to 'fillchars'. (Martin Tournoij, closes#11264,
closes#10963)
Problem: When using powershell input redirection does not work.
Solution: Use a different shell command for powershell. (Yegappan
Lakshmanan, closes#11257)
Problem: The 'splitscroll' option is not a good name.
Solution: Rename 'splitscroll' to 'splitkeep' and make it a string option,
also supporting "topline". (Luuk van Baal, closes#11258)
Problem: with 'smoothscroll' set CTRL-E does not work properly when
'foldmethod' is set to "indent". (Yee Cheng Chin)
Solution: Merge the code for scroling with folds and 'smoothscroll'.
(closes#11262)
Problem: Checking for popup in screen_char() is too late, the attribute has
already been changed.
Solution: Move check for popup to where screen_char() is called.
Problem: Evaluating "expr" options has more overhead than needed.
Solution: Use call_simple_func() for 'foldtext', 'includeexpr', 'printexpr',
"expr" of 'spellsuggest', 'diffexpr', 'patchexpr', 'balloonexpr',
'formatexpr', 'indentexpr' and 'charconvert'.
Problem: Get an error for using const only when executing.
Solution: Check for const at compile time for filter(), map(), remove(),
reverse(), sort() and uniq().
Problem: matchaddpos() can get slow when adding many matches.
Solution: Update the next available match ID when manually picking an ID and
remove check if the available ID can be used. (idea by Rick Howe)
Problem: Running source tests leaves file behind.
Solution: Add the "D" flag to writefile(). (Dominique Pellé, closes#11243)
Also do this for other writefile() calls and drop delete().
Problem: With spell checking, deleting a full stop at the end of a line
does not update SpellCap at the start of the next line.
Solution: Update the next line when characters have been deleted. Also when
using undo.
Problem: system() opens a terminal window when using the GUI and "!" is in
'guioptions'.
Solution: Do not use a terminal window when the SHELL_SILENT flag is used.
(closes#11202)
Problem: With 'nosplitscroll' folds are not handled correctly.
Solution: Take care of closed folds when moving the cursor. (Luuk van Baal,
closes#11234)
Problem: Cannot close a tab page with the middle mouse button.
Solution: Support closing a tab page with the middle mouse button, like many
other programs. (closes#10746)
Problem: Extra newline in messages after a verbose shell message.
Solution: Output the newline with msg_putchar_attr(). (closes#11233)
Make it possible to filter a screendump before comparing it.
Problem: Display not cleared when scrolling back in messages, a background
color is set and t_ut is empty.
Solution: Clear to the end of the display if needed. (closes#8973)
Problem: After exiting Insert mode spelling is not checked in the next
line.
Solution: When spelling is enabled redraw the next line after exiting Insert
mode in case the spell highlight needs updating.
Problem: Using freed memory when 'tagfunc' wipes out buffer that holds
'complete'.
Solution: Make a copy of the option. Make sure cursor position is valid.
Problem: Cannot easily get out when using "vim file | grep word".
Solution: Without changes let CTRL-C exit Vim. Otherwise give a message on
stderr. (closes#11209)
Problem: Cscope test causes problems when code for test timeout timer is
included (even when commented out).
Solution: Disable part of the cscope test for now.
Problem: Valgrind reports possibly leaked memory.
Solution: Move the problematic test function to the "fails" test file to
avoid obscuring real memory leaks.
Problem: Scrolling with 'nosplitscroll' in callback changing curwin.
Solution: Invalidate w_cline_row in the right place. (Luuk van Baal,
closes#11185)
Problem: Crash when closing a tabpage and buffer is NULL.
Solution: Adjust how autocommands are triggered when closing a window.
(closes#11198, closes#11197)
Problem: Declaring a loop variable at the start of a block is clumsy.
Solution: Declare the variable inside the loop in a few places to see if
this works.
Problem: When quitting the cmdline window with CTRL-C it remains visible.
Solution: Redraw to avoid confusion. Adjust the error message.
(closes#11152) Adjust the cursor position after CTRL-C.
Problem: Using "end_lnum" with virtual text causes problems.
Solution: Disallow using "end_lnum" with virtual text. (closes#11151)
Also disallow "end_col" and "length".
Problem: Text scrolled with 'nosplitscroll', autocmd win opened and help
window closed.
Solution: Skip win_fix_scroll() in more situations. (Luuk van Baal,
closes#11150)
Problem: In a :def function all closures in a loop get the same variables.
Solution: Use a separate list of variables for LOADOUTER and STOREOUTER.
Not copied at end of loop yet.
Problem: In a :def function all closures in a loop get the same variables.
Solution: When in a loop and a closure refers to a variable declared in the
loop, prepare for making a copy of variables for each closure.
Problem: Cursor moves if cmdwin is closed when 'splitscroll' is off.
Solution: Skip win_fix_cursor if called when cmdwin is open or closing.
(Luuk van Baal, closes#11134)
Problem: Cursor moves when cmdwin is closed when 'splitscroll' is off.
Solution: Temporarily set 'splitscroll' when jumping back to the original
window. (closes#11128)
Problem: Visual highlighting extends into virtual text prop.
Solution: Do not highlight what isn't actually selected. Fix ordering of
stored text props.
Problem: Using :echowin while at the hit-enter prompt causes problems.
Solution: Do not prompt for :echowin. Postpone showing the message window.
Start the timer when the window is displayed.
Problem: When opening/closing window text moves up/down.
Solution: Add the 'splitscroll' option. When off text will keep its
position as much as possible.
Problem: Crash when using mkdir() with "R" flag in compiled function.
Solution: Reserve a variable for deferred function calls. Handle more than
one argument.
Problem: Cursor wrong if inserting before line with virtual text above.
Solution: Add the width of the "above" virtual text to the cursor position.
(issue #11084)
Problem: "for" and "while" not recognized after :vim9cmd and :legacy.
(Emanuele Torre)
Solution: Recognize all the command modifiers. (closes#11087)
Add a test to check the list of modifiers.
Problem: The :defer command does not check the function argument count and
types.
Solution: Check the function arguments when adding a deferred function.
Problem: matchstr() still does not match column offset when done after a
text search.
Solution: Only use the line number for a multi-line search. Fix the test.
(closes#10938)
Problem: Only created files can be cleaned up with one call.
Solution: Add flags to mkdir() to delete with a deferred function.
Expand the writefile() name to a full path to handle changing
directory.
Problem: :defer not tested with exceptions and ":qa!".
Solution: Test :defer works when exceptions are thrown and when ":qa!" is
used. Invoke the deferred calls on exit.
Problem: Cygwin: multibyte characters may be broken in terminal window.
Solution: Adjust how to read and write on the channel. (Ken Takata,
closes#11063)
Problem: repeating a <ScriptCmd> mapping does not use the right script
context.
Solution: When using a mapping put <SID>{sid}; in the redo buffer.
(closes#11049)
Problem: GUI: when CTRL-D is mapped in Insert mode it gets inserted.
(Yasuhiro Matsumoto)
Solution: Also recognize modifier starting with CSI. (closes#11057)
Problem: Coverity warns for NULL check and unused return value.
Solution: Remove the NULL check, it was already checked earlier. Add (void)
to ignore the return value.
Problem: Removing a listener may result in a memory leak and remove
subsequent listerns.
Solution: Init the "prev" pointer only once. (Yegappan Lakshmanan,
closes#11039)
Problem: 'linebreak' interferes with text property highlight if there is
syntax highlighting.
Solution: Check the text prop attributes after combining with syntax
attributes. (closes#11035)
Problem: :echowindow sets the in_echowindow flag too early.
Solution: Set in_echowindow only when outputting the text. (Yasuhiro
Matsumoto, closes#11033)
Problem: MS-Windows: cannot set cursor shape in Windows Terminal.
Solution: Make cursor shape work with Windows Terminal. (Ken Takata,
closes#11028, closes#6576)
Problem: ColorScheme autocommand triggered when colorscheme is not found.
(Romain Lafourcade)
Solution: Only trigger ColorScheme when loading the colorscheme succeeds.
(closes#11024)
Problem: ":wincmd =" equalizes in two directions.
Solution: Make ":vertical wincmd =" equalize vertically only and
":horizontal wincmd =" equalize horizontally only.
Problem: Some changes for cmdheight=0 are not needed.
Solution: Revert resize behavior if height is greater than the available
space. (Shougo Matsushita, closes#11008)
Problem: When updating the whole screen a popup may not be redrawn.
Solution: Mark the screen and windows for redraw also when not clearing.
Also mark popup windows for redraw.
Problem: Output of :messages dissappears when cmdheight is zero.
Solution: Do not use the messages window for :messages. Make Esc close the
messages window.
Problem: It is not easy to get information about a script.
Solution: Make getscriptinf() return the version. When selecting a specific
script return functions and variables. (Yegappan Lakshmanan,
closes#10991)
Problem: Cursor position wrong after right aligned virtual text. (Iizuka
Masashi)
Solution: Take the width of the column offset into account. (closes#10997)
Also fix virtual text positioning.
Problem: Message in popup is shortened unnecessary.
Solution: Do not use 'showcmd' and 'ruler' for a message in the popup.
Set the timer when unhiding the message popup.
Problem: Crash when 'cmdheight' is 0 and popup_clear() used.
Solution: Reset "message_win" when the message popup is cleared. Close the
popup when 'cmdheight' is non-zero. Add a screendump test.
Problem: BufReadCmd not triggered when loading a "nofile" buffer. (Maxim
Kim)
Solution: Call readfile() but bail out before reading a file.
(closes#10983)
Problem: getscriptinfo() does not include the version. Cannot select
entries by script name.
Solution: Add the "version" item and the "name" argument. (Yegappan
Lakshmanan, closes#10962)
Problem: bufload() reads a file even if the name is not a file name. (Cyker
Way)
Solution: Do not read the file when the buffer name is not a file name.
(closes#10975)
Problem: A symlink to an autoload script results in two entries in the list
of scripts, items expected in one are actually in the other.
Solution: Have one script item refer to the actually sourced one.
(closes#10960)
Problem: Mechanism to prevent recursive screen updating is incomplete.
Solution: Add "redraw_not_allowed" and set it in build_stl_str_hl().
(issue #10952)
Problem: Cannot make a funcref with "s:func" in a def function in legacy
script.
Solution: Allow for using a lower case function name after "s:". (Kota Kato,
closes#10926)
Problem: Splitting a line may duplicate virtual text. (Ben Jackson)
Solution: Don't duplicate a text property with virtual text. Make
auto-indenting work better. (closes#10919)
Problem: Cursor in wrong position when inserting after virtual text. (Ben
Jackson)
Solution: Put the cursor after the virtual text, where the text will be
inserted. (closes#10914)
Problem: cursor in a wrong positoin if 'wrap' is off and using two right
aligned text props in one line.
Solution: Count an extra line for a right aligned text property after a
below or right aligned text property. (issue #10909)
Problem: Search and match highlgith interfere with virtual text highlight.
(Ben Jackson)
Solution: Check for match highlight after text properties. Reset and
restore search highlight when showing virtual text.
(closes#10892)
Problem: Possible invalid memory access when 'cmdheight' is zero. (Martin
Tournoij)
Solution: Avoid going over the end of w_lines[] when w_height is Rows.
(closes#10882)
Problem: Messages test fails; window size incorrect when 'cmdheight' is
made smaller.
Solution: Properly cleanup after test with cmdheight zero. Resize windows
correctly when 'cmdheight' gets smaller.
Problem: The way 'cmdheight' can be made zero is inconsistent.
Solution: Only make 'cmdheight' zero when setting it explicitly, not when
resizing windows. (closes#10890)
Problem: Virtual text without highlighting does not show. (Ben Jackson)
Solution: Use a text property when it has highlighting or when it has text.
(closes#10878)
Problem: Cursor position wrong with virtual text before Tab.
Solution: Use the byte length, not the cell with, to compare the column.
Correct tab size after text prop. (closes#10866)
Problem: Cursor position wrong with 'virtualedit' and mouse click after end
of the line. (Hermann Mayer)
Solution: Do not use ScreenCols[] when 'virtualedit' is active.
(closes#10868)
Problem: Spell checking for capital not working with trailing space.
Solution: Do not calculate cap_col at the end of the line. (Christian
Brabandt, closes#10870, issue #10838)
Problem: Cursor positioned wrong with two virtual text properties close
together. (Ben Jackson)
Solution: Add the original size, not the computed one. (closes#10864)
Problem: No fold and sign column for virtual text with "below" align and
'nowrap'.
Solution: Go back to draw state WL_START when moving to the next line.
(closes#10851)
Problem: Error for using #{ in an expression is a bit confusing.
Solution: Mention that this error is only given for an expression.
Avoid giving the error more than once. (closes#10855)
Problem: Test for fuzzy completion fails sometimes.
Solution: Use a more specific file name to minimize the chance of matching a
random directory name. (closes#10854)
Problem: Cursor positioned wrong after two text properties with virtual
text and "below" alignment. (Tim Pope)
Solution: Do not stop after a text property using MAXCOL. (closes#10849)
Problem: "delmenu" does not remove autocmmands. Running menu test function
alone fails.
Solution: Delete autocommands Make sure there is at least one menu.
(closes#10848)
Problem: Truncating virtual text after a line not implemented.
Cursor positioning wrong with Newline in the text.
Solution: Implement truncating. Disallow control characters in the text.
(closes#10842)
Problem: Expanding file names fails in directory with more than 255
entries.
Solution: Use an int instead of char_u to count. (John Drouhard,
closes#10818)
Problem: Text of removed textprop with text is not freed.
Solution: Free the text when the property is removed. Reduce the array size
to ignore NULLs at the end.
Problem: The command line takes up space even when not used.
Solution: Allow for 'cmdheight' to be set to zero. (Shougo Matsushita,
closes#10675, closes#940)
Problem: Writing over the end of a buffer on stack when making list of
spell suggestions.
Solution: Make sure suggested word is not too long. (closes#10812)
Problem: If running configure with cached results -lrt may be missing.
Solution: Use two cache variables, one without and one with -lrt.
(closes#10799) Swap checks to avoid adding -lrt unnecessarily.
Problem: MS-Windows: CTRL-[ on Belgian keyboard does not work like Esc.
Solution: Figure out what the key code means. (Anton Sharonov,
closes#10687, closes#10454)
Problem: Using "terraform" filetype for .tfvars file is bad.
Solution: use "terraform-vars", so that different completion and other
mechanisms can be used. (Radek Simko, closes#10755)
Problem: Command line completion of user command may have duplicates.
(Dani Dickstein)
Solution: Skip global user command if an identical buffer-local one is
defined. (closes#10797)
Problem: Star register is changed when deleting and both "unnamed" and
"unnamedplus" are in 'clipboard'.
Solution: Make the use of the star register work as documented. (Ernie Rael,
closes#10669)
Problem: When switching window in autocmd the restored cursor position may
be wrong.
Solution: Do not restore the cursor if it was not set. (closes#10775)
Problem: Command overlaps with printed text in scrollback.
Solution: Clear until end-of-line and use correct message chunk.
(closes#10765, closes#10764)
Problem: The bitmaps/vim.ico file is not in the distribution.
Solution: Add it back to the distribution. Adjust the build rules to have
it end up in the right place.
Problem: Invalid memory access when adding word with a control character to
the internal spell word list.
Solution: Disallow adding a word with control characters or a trailing
slash.
Problem: With EXITFREE defined terminal menus are not cleared.
Solution: Also clear terminal menus. Remove condition that is always true.
(closes#10641)
Problem: Reproducing memory access errors can be difficult.
Solution: When testing, copy each line to allocated memory, so that valgrind
can detect accessing memory before and/or after it. Fix uncovered
problems.
Problem: With 'lazyredraw' set completion menu may be displayed wrong.
Solution: When the popup menu is visible do not insert a screen line.
(closes#106010)
Problem: Some tests fail when using valgrind. Spurious leak reports.
Solution: Use WaitForAssert(). Avoid failing fork/exec. Skip tests where a
job is killed when running valgrind.
Problem: Timeout implementation is not optimal.
Solution: Further improvements for timeouts. Add a test for searchpair()
timeout. (partly by Paul Ollis)
Problem: Timeout handling is not optimal.
Solution: Avoid setting timeout_flag twice. Adjust the pointer when
stopping the regexp timeout. Adjust variable name.
Problem: Syntax highlighting disabled when using synID() in searchpair()
skip expression and it times out. (Jaehwang Jung)
Solution: Add the redrawtime_limit_set flag. (closes#10562)
Problem: MS-Windows: sending a message to another Vim may hang if that Vim
is halted.
Solution: Add a timeout to serverSendToVim(). (Ken Takata, closes#10585)
Problem: Search timeout is overrun with some patterns.
Solution: Check for timeout in more places. Make the flag volatile and
atomic. Use assert_inrange() to see what happened.
Problem: Default cmdwin mappings are re-mappable.
Solution: Make the default mappings not re-mappable. (closes#10580) Use
symbols for the first do_map() argument.
Problem: Interrupt not caught in test.
Solution: Consider an exception thrown in the current try/catch when got_int
is set. Also catch early exit when not using try/catch.
Problem: Terminal test still fails with some shell commands.
Solution: Disable setting the window title in the Vim instance running in a
terminal window. (closes#10530)
Problem: Autoconf 2.71 produces many obsolete warnings.
Solution: Replace obsolete macros with non-obsolete ones, where the
functionality does not change. (issue #10528)
Problem: Cannot have a comment halfway an expression in an autocmd command
block.
Solution: When skipping over the NL also skip over comments. (closes#10519)
Problem: Command line test fails.
Solution: Also beep when cmdline win can't be opened because of locks.
Make the test not beep. Make the test pass on MS-Windows.
Problem: A finished terminal in a popup window does not show a scrollbar.
Solution: Show the scrollbar if the terminal job is finished. (closes
#10497)
Problem: Syntax regexp matching can be slow.
Solution: Adjust the counters for checking the timeout to check about once
per msec. (closes#10487, closes#2712)
Problem: Byte offsets are wrong when using text properties.
Solution: Make sure text properties do not affect the byte counts.
(Paul Ollis, closes#10474)
Problem: Python: changing hidden buffer can cause the display to be messed
up.
Solution: Do not mark changed lines when using another buffer. (Paul Ollis,
closes#10437, closes#7972)
Problem: smart/C/lisp indenting is optional, which makes the code more
complex, while it only reduces the executable size a bit.
Solution: Graduate FEAT_CINDENT, FEAT_SMARTINDENT and FEAT_LISP.
Problem: Compiler warning for possibly uninitialized variable. (Tony
Mechelynck)
Solution: Initialize variable in the caller instead of in the function.
Problem: When 'shortmess' contains 'A' loading a session may still warn for
an existing swap file. (Melker Österberg)
Solution: Keep the 'A' flag to 'shortmess' in the session file.
(closes#10443)
Problem: Text properties that cross line boundary are not correctly updated
for a deleted line.
Solution: Correct computing location of text property entry. (Paul Ollis,
closes#10431, closes#10430)
Problem: Cannot use Perl heredoc in nested :def function. (Virginia
Senioria)
Solution: Only concatenate heredoc lines when not in a nested function.
(closes#10415)
Problem: Text properties are wrong after "cc". (Axel Forsman)
Solution: Pass the deleted byte count to inserted_bytes(). (closes#10412,
closes#7737, closes#5763)
Problem: With 'foldmethod' "indent" some lines are not included in the
fold. (Oleg Koshovetc)
Solution: Fix it. (Brandon Simmons, closes#10399, closes#3214)
Problem: Return type of remove() incorrect when using three arguments.
Solution: Use first argument type when there are three arguments.
(closes#10387)
Problem: Fuzzy expansion of option names is not right.
Solution: Pass the fuzzy flag down the call chain. (Christian Brabandt,
closes#10380, closes#10318)
Problem: Some users do not want a line comment always inserted.
Solution: Add the '/' flag to 'formatoptions' to not repeat the comment
leader after a statement when using "o".
Problem: MS-Windows: cannot use transparent background.
Solution: Make transparent background work with 'termguicolors' and NONE
background color. (Yasuhiro Matsumoto, closes#10310, closes#7162)
Problem: Cannot get the current cmdline completion type and position.
Solution: Add getcmdcompltype() and getcmdscreenpos(). (Shougo Matsushita,
closes#10344)
Problem: Vim help presentation could be better.
Solution: Add an imported file for extra Vim help support. Show highlight
names in the color they have.
Problem: Line number of lambda ignores line continuation.
Solution: Use the line number of where the arguments are. Avoid outputting
"..." twice. (closes#10364)
Problem: String interpolation only works in heredoc.
Solution: Support interpolated strings. Use syntax for heredoc consistent
with strings, similar to C#. (closes#10327)
Problem: Cannot make 'breakindent' use a specific column.
Solution: Add the "column" entry in 'breakindentopt'. (Christian Brabandt,
closes#10362, closes#10325)
Problem: MS-Windows: Using Normal colors for termguicolors causes problems.
Solution: Do not use Normal colors to set sg_gui_fg and sg_gui_bg.
(Christian Brabandt, closes#10317, closes#10241)
Problem: Vim9: no error for using an expression only at the script level
when followed by an empty line.
Solution: Do not check the line number but whether something follows.
(closes#10357)
Problem: Vim9: in :def function no error for using a range with a command
that does not accept one.
Solution: Check for the command to accept a range. (closes#10330)
Problem: :startinsert right after :stopinsert does not work when popup menu
is still visible.
Solution: Use ins_compl_active() instead of pum_visible(). (closes#10352)
Problem: Accessing freed memory in test without the +channel feature.
(Dominique Pellé)
Solution: Do not generted PUSHCHANNEL or PUSHJOB if they are not
implemented. (closes#10350)
Problem: Local completion with mappings and simplification not working.
Solution: Fix local completion <C-N>/<C-P> mappings not ignored if keys are
not simplified. (closes#10323)
Problem: Win32 GUI: Treating CTRL + ALT as AltGr is not backwards
compatible. (Axel Bender)
Solution: Make a difference between left and right menu keys.
(closes#10308)
Problem: Empty string considered an error for expand() when 'verbose' is
set. (Christian Brabandt)
Solution: Do not give an error for an empty result. (closes#10307)
Problem: Modifiers not simplified when timed out or using feedkeys() with
'n" flag.
Solution: Adjust how mapped flag and timeout are used. (closes#10305)
Problem: Can only get a list of mappings.
Solution: Add the optional {abbr} argument. (Ernie Rael, closes#10277)
Rename to maplist(). Rename test file.
Problem: Cannot build with older GTK version.
Solution: Use gtk_window_get_size() instead of gdk_window_get_width() and
gdk_window_get_height(). (Ernie Rael, closes#10257)
Problem: Possible to leave a popup window with win_gotoid().
Solution: Give an error when trying to leave a popup window with
win_gotoid(). (closes#10253)
Problem: A mapping using <LeftDrag> does not start Select mode.
Solution: When checking for starting select mode with the mouse also do this
when there is typeahead. (closes#10249)
Problem: Expression in heredoc doesn't work for compiled function.
Solution: Implement compiling the heredoc expressions. (Yegappan Lakshmanan,
closes#10232)
Problem: Autocmd events triggered in different order when reusing an empty
buffer.
Solution: Call buff_freeall() earlier. (Charlie Groves, closes#10198)
Problem: The cursor may be in the in wrong place when using :redraw while
editing the cmdline.
Solution: When editing the command line let :redraw update the command line
too. (closes#10210)
Problem: Visual mode not stopped early enough if win_gotoid() goes to
another buffer. (Sergey Vlasov)
Solution: Stop Visual mode before jumping to another buffer. (closes#10217)
Problem: Screendump tests fail because of a redraw.
Solution: Do not output t_8u before receiving termresponse. Redraw only
when t_8u is not reset and termresponse is received.
Problem: Mapping <SID>name.Func does not work for script in autoload
directory.
Solution: Use the # form for a script in the autoload directory.
(closes#10186)
Problem: <script> is not expanded in autocmd context.
Solution: Add the context to the pattern struct. (closes#10144)
Rename AutoPatCmd to AutoPatCmd_T.
Problem: There is no way to start logging very early in startup.
Solution: Add the --log argument. Include the date in the start message in
the log file. Avoid a duplicate message when forking. Log an
executed shell command.
Problem: Accessing freed memory after WinScrolled autocmd event.
Solution: Check the window pointer is still valid. (closes#10156)
Remove the argument from may_trigger_winscrolled().
Problem: Esc on commandline executes command instead of abandoning it.
Solution: Save and restore KeyTyped when removing the popup menu.
(closes#10154)
Problem: ">" marker sometimes not displayed in the jumplist.
Solution: If the buffer no longer exists show "-invalid-". (Christian
Brabandt, closes#10131, closes#10100)
Problem: For TextYankPost v:event does not contain information about the
operation being inclusive or not.
Solution: Add "inclusive" to v:event. (Justn M. Keyes, Yegappan Lakshmanan,
closes#10125)
Problem: Only get profiling information after exiting.
Solution: Add "profile dump" and "profile stop". (Marco Hinz, Yegappan
Lakshmanan, closes#10107)
Problem: When 'insermode' is set :edit from <Cmd> mapping misbehaves.
Solution: Don't set "need_start_insertmode" when already in Insert mode.
(closes#10116)
Problem: Buffer remains active if a WinClosed event throws an exception
when there are multiple tabpages.
Solution: Ignore aborting() when closing the buffer. (closes#10101)
Problem: Hard to reproduce hang when reading from a channel.
Solution: Check for readahead before starting to wait. (closes#10093,
closes#7781, closes#6364)
Problem: Vim9: crash when adding a duplicate key to a dictionary.
Solution: Clear the stack item when it has been moved into the dictionary.
(closes#10087)
Problem: Using <Cmd> in a mapping does not work for mouse keys in Insert
mode. (Sergey Vlasov)
Solution: When reading the <Cmd> argument do not use the stuff buffer.
(closes#10080)
Problem: "vimgrep /\%v/ *" may cause a crash.
Solution: When compiling the pattern with the old engine fails, restore the
regprog of the new engine instead of leaving it NULL.
(closes#10079)
Problem: When a swap file is found for a popup there is no dialog and the
buffer is loaded anyway.
Solution: Silently load the buffer read-only. (closes#10073)
Problem: Cannot have expandcmd() give an error message for mistakes.
Solution: Add an optional argument to give errors. Fix memory leak when
expanding files fails. (Yegappan Lakshmanan, closes#10071)
Problem: Redrawing a vertically split window is slow when using CTRL-F and
CTRL-B.
Solution: When deciding on USE_REDRAW bail out if scrolling more than three
lines. (issue #8002)
Problem: 'wildignorecase' is sometimes not used for glob().
Solution: Also use 'wildignorecase' when there are no wildcards.
(closes#10066, closes#8350)
Problem: Memory allocation failures for new tab page not tested.
Solution: Add tests with failing memory allocation. (Yegappan Lakshmanan,
closes#10067)
Problem: Cursorcolumn is sometimes not correct.
Solution: Recompute the cursor column when entering Insert mode and the
cursor is on a character wider than a screen cell.
Problem: Vim9: can't use items from "import autoload" with autoload
directory name.
Solution: Let sn_autoload_prefix overrule sn_import_autoload.
(closes#10054)
Problem: Command line completion popup menu positioned wrong when using a
terminal window.
Solution: Position the popup menu differently when editing the command line.
(Yegappan Lakshmanan, closes#10050, closes#10035)
Problem: Vim9: cannot initialize a variable to null_list.
Solution: Give negative count to NEWLIST. (closes#10027)
Also fix inconsistencies in comparing with null values.
Problem: Mapping is cancelled when mouse moves and popup is visible.
Solution: Only generate mouse moved events when a popup may use them.
(closes#10004)
Problem: Vim9: Declarations in a {} block of a user command do not use Vim9
rules if defined in a legacy script. (Yegappan Lakshmanan)
Solution: Pretend the script is Vim9 script.
Problem: Redrawing too much when 'cursorline' is set and jumping around.
Solution: Rely on win_update() to redraw the current and previous cursor
line, do not mark lines as modified. (closes#9996)
Problem: Vim9: cannot use a recursive call in a nested function. (Sergey
Vlasov)
Solution: Define the funcref before compiling the function. (closes#9989)
Problem: :unhide does not check for failing to close a window.
Solution: When closing a window fails continue with the next one. Do not
try closing the autocmd window. (closes#9984)
Problem: getcompletion() does not work properly when 'wildoptions
contains "fuzzy".
Solution: Do not use addstar(). (Yegappan Lakshmanan, closes#9992,
closes#9986)
Problem: Sourcing buffer lines is too complicated.
Solution: Simplify the code. Make it possible to source Vim9 script lines.
(Yegappan Lakshmanan, closes#9974)
Problem: Need to write script to a file to be able to source them.
Solution: Make ":source" use lines from the current buffer. (Yegappan
Lakshmanan et al., closes#9967)
Problem: Cannot use page-up and page-down in the command line completion
popup menu.
Solution: Check for to page-up and page-down keys. (Yegappan Lakshmanan,
closes#9960)
Problem: No warning when an autoload script for completion function has an
error.
Solution: Do not ignore errors when a function name is given with a dot or
'#' character. (closes#9958)
Problem: Vim9: test for profiling still fails.
Solution: Update flags for profiling and breakpoints when obtaining the
compile type. Do not set the FC_CLOSURE flag for a toplevel
function.
Problem: A nested function (closure) is compiled for debugging without
context.
Solution: Check if a nested function is marked for debugging before
compiling it. Give an error when trying to compile a closure
without its context. (closes#9951)
Problem: Vim9: return type "any" is sometimes changed to first returned
type. (Virginia Senioria)
Solution: Do not change the return type if declared as "any". (closes#9949)
Problem: getmousepos() does not compute the column below the last line.
Solution: Also compute the column when the mouse is below the last line.
(Sean Dewar, closes#9946)
Problem: Check for existing buffer in session file does not work for files
in the home directory.
Solution: Use fnamemodify(). (James Cherti, closes#9945) Add a test.
Problem: No command line completion for :breakadd and :breakdel.
Solution: Add completion for :breakadd and :breakdel. (Yegappan Lakshmanan,
closes#9950)
Problem: When mapping <Esc> terminal codes are not recognized.
Solution: Specifically recognize a mapping with just <Esc> and check for
terminal codes even though there is no partial mapping.
(closes#9903)
Problem: Script-local function is deleted when used in a funcref.
Solution: Do not consider a function starting with "<SNR>" reference
counted. (closes#9916, closes#9820)
Problem: The neXTaw GUI is old and does not work well.
Solution: Remove the neXTaw GUI from configure to find out who still wants
support for this GUI.
Problem: MS-Windows: the installed icon is low resolution.
Solution: Use a better icon. Install vim.ico. (Christian Brabandt,
closes#9931, closes#9930)
Problem: Coverity warning for refactored tag search code.
Solution: Avoid the warnings. Update comments. Add one more test case.
(Yegappan Lakshmanan, closes#9928)
Problem: When comparing special v:none and v:null are handled the same when
compiling.
Solution: Pass more information so that v:none can be handled differently at
compile time. (issue #9923)
Problem: LGTM warnings for condition always true and buffer size too small.
Solution: Remove the useless condition. Make the buffer larger. (Goc
Dundar, closes#9914)
Problem: The Athena GUI is old and does not work well.
Solution: Remove the Athena GUI from configure to find out who still wants
support for this GUI.
Problem: MS-Windows: cannot build with some sodium libraries.
Solution: Make the DLL name configuragle. Add build instructions.
(Ken Takata, closes#9905)
Problem: When gvim is started maximized the 'window' option isn't set
properly. (Christian J. Robinson)
Solution: Check if 'windows' was already set or not. (Ken Takata,
closes#9904)
Problem: Vim9: some flow commands can be shortened.
Solution: Also require using the full name for ":return", ":enddef",
":continue", ":export" and ":import".
Problem: Vim9: shortening commands leads to confusing script.
Solution: In Vim9 script require at least ":cont" for ":continue", "const"
instead of "cons", "break" instead of "brea", "catch" instead of
"cat", "else" instead of "el" "elseif" instead of "elsei" "endfor"
instead of "endfo" "endif" instead of "en" "endtry" instead of
"endt", "finally" instead of "fina", "throw" instead of "th",
"while" instead of "wh".
Problem: "pattern not found" for :global is not an error message.
Solution: In Vim9 script make this an actual error, so that try/catch can be
used as expected.
Problem: When there is a partially matching map and modifyOtherKeys is
active a full map may not work.
Solution: Only simplify modifiers when there is no matching mapping.
(closes#8792)
Problem: In the GUI a modifier is not recognized for the key typed after
CTRL-X, which may result in a mapping to be used. (Daniel
Steinberg)
Solution: Recognize a modifier starting with CSI. (closes#9889)
Problem: With 'showbreak' set and after the end of the line the cursor
may be displayed in the wrong position.
Solution: Do not apply 'showbreak' after the end of the line. (closes#9884)
Problem: Vim9: at the script level declarations leak from try block to
catch and finally block.
Solution: End the block and start a new one. (closes#9883)
Problem: Failing test for comparing v:null with number.
Solution: Allow comparing v:null with number in legacy script.
(Ken Takata, closes#9873) Also do this for float.
Problem: No fuzzy cmdline completion for user defined completion.
Solution: Add fuzzy completion for user defined completion. (Yegappan
Lakshmanan, closes#9858)
Problem: Fuzzy cmdline completion does not work for lower case.
Solution: Also use fuzzy completion for lower case input. (Yegappan
Lakshmanan, closes#9849)
Problem: MS-Windows: illegal memory access in installer when using
"create-directories" as the final argument.
Solution: Check the argument count. (Cam Sinclair, closes#9844)
Problem: Vim9: compiling sort() call fails with a funcref that has unknown
arguments.
Solution: Do not check the arguments if they are unknown at compile time.
(closes#9835)
Problem: Vim9: compiling filter() call fails with funcref that has unknown
arguments.
Solution: Do not check the arguments if they are unknown at compile time.
(closes#9835)
Problem: Vim9: cannot refer to a global function like a local one.
Solution: When g:name is not a variable but a function, use a function
reference. (closes#9826)
Problem: Beep caused by test. ASAN reports leaks.
Solution: Do not put a NL at the end of the script. Make the text work on
MS-Windows. Do not run the test with ASAN.
Problem: Using script-local function from the wrong script when using a
partial. (Yegappan Lakshmanan)
Solution: Include the script ID in the partial name.
Problem: map() function on string and blob does not check argument types at
compile time.
Solution: Check string and blob argument types. Support "0z1234->func()".
Problem: Vim9: using a script-local function requires using "s:" when
setting 'completefunc'.
Solution: Do not require "s:" in Vim9 script. (closes#9796)
Problem: Expand functions use confusing argument names.
Solution: Rename "file" to "match". Refactor some completion code. Add a
few more tests. (Yegappan Lakshmanan, closes#9790)
Problem: MS-Windows: cannot use the mouse in the console with VIMDLL.
Solution: use add_char2buf() instead of fix_input_buffer(). (closes#9784,
closes#9769)
Problem: Some command completion functions are too long.
Solution: Refactor code into separate functions. Add a few more tests.
(Yegappan Lakshmanan, closes#9785)
Problem: Vim9: list from declaration with inferred type does not set the
type on the value.
Solution: When inferring the type in a variable declaration also set the
type of the list or dictionary. (closes#9705) Do not set the
type when the member is "any".
Problem: Command line completion doesn't always work properly.
Solution: Adjust triggering after a "|". Add more tests. (Yegappan
Lakshmanan, closes#9779)
Problem: Vim9: error message not tested, some code not tested.
Solution: Add a couple of test cases. Give an error for a command modifier
without a command.
Problem: A custom 'tabline' may cause Esc to work like Enter on the
command line when the popup menu is displayed.
Solution: Save and restore KeyTyped. (closes#9776)
Problem: Incsearch highlight broken when calling searchcount() in 'tabLine'
function. (Mirko Palmer)
Solution: Save and restore the incsearch state. (Christian Brabandt,
closes#9763, closes#9633)
Problem: MS-Windows: libsodium.dll not included with the installer.
Solution: Add the file to the installer if it exists. (Christian Brabandt,
closes#9762)
Problem: Dynamic loading of libsodium not handled properly.
Solution: Fix has() and :version. Show an error message when loading fails.
Fix memory leaks. (Ken Takata, closes#9754)
Problem: "legacy exe cmd" does not do what one would expect.
Solution: Apply the "legacy" and "vim9script" command modifiers to the
argument of ":execute".
Problem: A custom statusline may cause Esc to work like Enter on the
command line when the popup menu is displayed.
Solution: Save and restore KeyTyped. (closes#9749)
Problem: Command line not redrawn when finishing popup menu and the screen
has scrolled up.
Solution: Redraw the command line after updating the screen. (closes#9722)
Problem: CTRL-A does not work properly with the cmdline popup menu.
Solution: Fix issues with CTRL-A. Add more tests for the cmdline popup
menu. Remove TermWait() before VeriryScreenDump(). Refactor the
cmdline popup code. (Yegappan Lakshmanan, closes#9735)
Problem: An error from an expression mapping messes up the display.
Solution: When the expression results in an empty string return K_IGNORE.
In cmdline mode redraw the command line. (closes#9726)
If you want to report a security issue, please use [huntr.dev](https://huntr.dev/bounties/disclose?target=https%3A%2F%2Fgithub.com%2Fvim%2Fvim) to privately disclose the issue to us.
They also have rewards in the form of money, swag and CVEs.
**Please don't publicly disclose the issue until it has been addressed by us.**
elseifline1=~'^\(diff\>\|Only in \|\d\+\(,\d\+\)\=[cda]\d\+\>\|# It was generated by makepatch \|Index:\s\+\f\+\r\=$\|===== \f\+ \d\+\.\d\+ vs edited\|==== //\f\+#\d\+\|# HG changeset patch\)'
||(line1=~'^--- ' && line2=~'^+++ ')
||(line1=~'^\* looking for ' && line2=~'^\* comparing to ')
" varname<g:netrw_ftp_browse_reject> value=^total\s\+\d\+$\|^Trying\s\+\d\+.*$\|^KERBEROS_V\d rejected\|^Security extensions not\|No such file\|: connect to address [0-9a-fA-F:]*: No route to host$ ~1
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
